Daily Papers

Variational Quantum Algorithms (VQAs) rely heavily on classical optimization routines to navigate high-dimensional, noisy parameter landscapes. However, the evaluation of analytical gradients via the parameter-shift rule requires O(p) circuit executions, rendering this approach computationally prohibitive for deep circuits. While simultaneous perturbation methods provide an O(1) alternative, their gradient estimates suffer from severe O(p) spatial variance, which impedes convergence. To resolve this tension, we introduce the Cached Recycled Variance-Reduced Gradient (CRVG) by leveraging variance reduction techniques. We formulate two variants: a 3-Circuit (1-Sided) Non-Recursive CRVG and a Recursive CRVG. By introducing a center-point caching mechanism, the 3-Circuit CRVG mathematically recycles quantum measurements to reduce the inner-loop circuit complexity by 25\% across both variants. We establish a theoretical separation between the two routing paths to achieve an ε^2-stationary point: the non-recursive variant reaches a sample complexity of O(max{p/ε^2, p^{2/3}/ε^{10/3}}), while the recursive variant achieves an improved complexity of O(max{p/ε^2, p/ε^3}). Empirically, extensive evaluations on MaxCut and Maximum Independent Set (MIS) benchmarks validate these findings. While standard simultaneous perturbation remains a robust baseline across varying depths, CRVG demonstrates targeted advantages in specific amortizable regimes, such as the non-recursive variant on EfficientSU2 circuits and both variants on depth-three QAOA, yielding superior energy minimums and tighter output variances. Ultimately, CRVG establishes a principled bias-throughput trade-off for scaling near-term quantum optimization.

Long contexts enlarge key--value (KV) caches, increasing memory use and attention costs during generation. Compressing these caches must preserve information for unseen questions. We introduce **Latent Compaction**, which learns a compact document-specific cache through test-time training. We initialize cache entries using reconstruction importance, teacher attention, and key-space diversity. Training first fits attention outputs and log-normalizers to those of the full cache, with reconstruction-selected entries held fixed. It then jointly optimizes the entire cache through end-to-end distillation from the full-cache model. Model weights remain frozen throughout, and training uses only generic prompts about the document, without access to downstream questions or answers. Experiments on RULER, LongBench, and Phonebook Lookup demonstrate substantial gains over budget-matched compression baselines. On a RULER, for example, our method achieves 96.7% accuracy at 32times compression, compared with 40.0% for KVZip+. The method also transfers across model scales and families, with retrieval gains on both Qwen3 and MiniCPM5. These results show that treating the KV cache as a neural network and optimizing it with test-time training can preserve retrieval accuracy under aggressive compression. The code is released at https://www.github.com/THUNLP/latent-compaction

In retrieval-augmented generation and agentic LLM serving, prompts are assembled from independent segments into long contexts, making the prefill stage dominate per-request cost. Two directions have emerged to reduce this cost: position-independent caching (PIC) admits KV reuse for non-contiguous segments shared across requests, while hybrid-attention models cut computation by replacing most full-attention layers with linear attention. However, they cannot coexist: applying existing PIC methods to hybrid-attention models breaks down because per-token KV-cache reuse primitives do not transfer to the per-request recurrent state. We present Hypic, the first system to accelerate hybrid-attention LLM serving with position-independent caching. For linear-attention layers, we identify the segment-cumulative transition operator as the missing algebraic primitive and cache it alongside each segment's zero-start end-state, enabling near-exact and constant-time composition of independently cached segments. For the remaining full-attention layers, existing PIC methods also fail because linear layers do not expose the per-token hidden states needed for selective recomputation. We show that the largest deviations concentrate at segment beginnings and construct a small seam window that propagates hidden states through the hybrid-attention stack to repair cross-segment attention. Finally, Hypic introduces segment parallelism, which exploits PIC's segment-level self-containment to parallelize cache-miss prefill across instances, turning long cold requests into an accelerable workload. Evaluated across four hybrid-attention models and five workloads, Hypic reduces time-to-first-token by 3.25times on average and improves QPS by 1.66times over Prefix Cache, while preserving task quality with a 1.71-point gap from Full Recompute.

Sparse Mixture of Experts (MoE) models, while outperforming dense Large Language Models (LLMs) in terms of performance, face significant deployment challenges during inference due to their high memory demands. Existing offloading techniques, which involve swapping activated and idle experts between the GPU and CPU, often suffer from rigid expert caching mechanisms. These mechanisms fail to adapt to dynamic routing, leading to inefficient cache utilization, or incur prohibitive costs for prediction training. To tackle these inference-specific challenges, we introduce ExpertFlow, a comprehensive system specifically designed to enhance inference efficiency by accommodating flexible routing and enabling efficient expert scheduling between CPU and GPU. This reduces overhead and boosts system performance. Central to our approach is a predictive routing path-based offloading mechanism that utilizes a lightweight predictor to accurately forecast routing paths before computation begins. This proactive strategy allows for real-time error correction in expert caching, significantly increasing cache hit ratios and reducing the frequency of expert transfers, thereby minimizing I/O overhead. Additionally, we implement a dynamic token scheduling strategy that optimizes MoE inference by rearranging input tokens across different batches. This method not only reduces the number of activated experts per batch but also improves computational efficiency. Our extensive experiments demonstrate that ExpertFlow achieves up to 93.72\% GPU memory savings and enhances inference speed by 2 to 10 times compared to baseline methods, highlighting its effectiveness and utility as a robust solution for resource-constrained inference scenarios.

LLM serving systems process heterogeneous query workloads where different categories exhibit different characteristics. Code queries cluster densely in embedding space while conversational queries distribute sparsely. Content staleness varies from minutes (stock data) to months (code patterns). Query repetition patterns range from power-law (code) to uniform (conversation), producing long tail cache hit rate distributions: high-repetition categories achieve 40-60% hit rates while low-repetition or volatile categories achieve 5-15% hit rates. Vector databases must exclude the long tail because remote search costs (30ms) require 15--20% hit rates to break even, leaving 20-30% of production traffic uncached. Uniform cache policies compound this problem: fixed thresholds cause false positives in dense spaces and miss valid paraphrases in sparse spaces; fixed TTLs waste memory or serve stale data. This paper presents category-aware semantic caching where similarity thresholds, TTLs, and quotas vary by query category. We present a hybrid architecture separating in-memory HNSW search from external document storage, reducing miss cost from 30ms to 2ms. This reduction makes low-hit-rate categories economically viable (break-even at 3-5% versus 15-20%), enabling cache coverage across the entire workload distribution. Adaptive load-based policies extend this framework to respond to downstream model load, dynamically adjusting thresholds and TTLs to reduce traffic to overloaded models by 9-17% in theoretical projections.

The key-value (KV) cache is a primary capacity and bandwidth bottleneck in long-context LLM serving. We present Minima-KV, a retention-preserving hierarchy for mixed-format paged attention. Recent and protected Anchor pages remain in FP8, while older non-anchor pages move to packed TQ3; every live-request page remains addressable. Format-specific kernels compute partial attention states and combine them through a globally normalized online-softmax merge, enabling direct heterogeneous decode without a cache-sized dense shadow. Across separate, configuration-bound Qwen3.6-27B profiles on a single 96-GB NVIDIA RTX PRO 6000 Blackwell GPU, deployment accounting reports 18.3 KiB of attention KV per live token, corresponding to 3.50x compression relative to BF16 and 1.75x relative to FP8. A materializing quality profile matches its dense control on 16K RULER needle-in-a-haystack tasks. On the same 503-question LongBench v2 set, measured deltas are -0.80, -0.60, and -0.40 percentage points at 16K, 32K, and 64K. A separate single-pair direct-decode canary with two 59,008-token requests measures 3.625x active-KV compression and 0.9821x throughput relative to its control, routes all 16 full-attention layers without fallback, and retains no dense shadow. These results establish a practical mixed-format path for compressing long-context state without evicting live-request KV pages.

Industrial asset operations workflows are latency-sensitive because a single user query may require coordination over sensor data, work orders, failure modes, forecasting tools, and domain-specific agents. We evaluate this problem on AssetOpsBench (AOB), an industrial agent benchmark whose plan-execute pipeline exposes repeated overhead from tool discovery, LLM planning, MCP tool execution, and final summarization. Existing LLM caching techniques such as KV-cache reuse and embedding-based semantic caching were designed for chatbot serving and break down when output validity depends on time, asset, or sensor parameters. We propose two complementary optimization layers for AOB plan-execute pipelines: a temporal semantic cache and a set of MCP workflow optimizations combining disk-backed tool-discovery caching and dependency-aware parallel step execution. MCP workflow optimizations corresponded to a 1.67x speedup and reduced median end-to-end latency by about 40.0% while the temporal-cache benchmark achieved a median of 30.6x speedup on cache hits. Beyond the speedup, our results expose a concrete failure mode of pure semantic caching for parameter-rich industrial queries, providing a critical analysis of how caching choices interact with evaluation correctness in MCP-backed agent benchmarks.

In LLM serving, reusing the KV cache of prompts across requests is critical for reducing TTFT and serving costs. Cache-affinity scheduling, which co-locates requests with the same prompt prefix to maximize KV cache reuse, often conflicts with load-balancing scheduling that distributes requests evenly across compute instances. Existing schedulers fail to reconcile this trade-off as they operate within a single mapping space, typically applying cache-affinity routing to a subset of requests and load-balanced routing to the rest, without a unified solution to achieve both goals. To address this limitation, we propose DualMap, a dual-mapping scheduling strategy for distributed LLM serving that achieves both cache affinity and load balancing. Its key idea is to map each request to two candidate instances via two independent hash functions based on the request prompt, then intelligently select the better candidate based on current system states. This design increases the likelihood that requests with shared prefixes are co-located, while evenly dispersing distinct prefixes across the cluster via ``the power of two choices''. To make DualMap robust under dynamic and skewed real-world workloads, we incorporate three techniques: 1) SLO-aware request routing, which prioritizes cache affinity but switches to load-aware scheduling when TTFT exceeds the SLO, enhancing load balance without sacrificing cache reuse; 2) hotspot-aware rebalancing, which dynamically migrates requests from overloaded to underloaded instances, mitigating hotspots and rebalancing the system; 3) lightweight dual-hash-ring scaling, which leverages a dual-hash-ring mapping to support fast and low-overhead instance scaling without costly global remapping. Experiments on real-world workloads show that DualMap improves effective request capacity by up to 2.25times under the same TTFT SLO constraints compared with SOTA work.

Semantic caching cuts LLM inference costs by serving a cached response to semantically similar queries. Standard practice evaluates these systems using PR-AUC, a metric that only measures how well scores rank and ignores whether they are usable at a fixed threshold. We show this mismatch leads to systematically poor deployment choices, as models with the highest PR-AUC are often the worst in operation. We introduce Precision--Cache Hit Ratio (P-CHR) AUC, a cache-aware metric that measures precision across cache utilization levels, and Operational Retention Rate (ORR), which captures how much offline ranking quality survives at deployment. We decompose the operational gap between offline and deployed quality into a recoverable threshold-utility component and an irreducible structural component fixed by the dataset's positive rate. Our experiments show that the threshold-utility gap is governed by the training objective rather than data scale, and yields only to re-normalizing scores over the candidate pool or changing the training objective. Ultimately, model selection for semantic caching is a threshold-utility problem, not a ranking one, and measuring it is the first step to closing the gap.

Mooncake is the serving platform for Kimi, a leading LLM service provided by Moonshot AI. It features a KVCache-centric disaggregated architecture that separates the prefill and decoding clusters. It also leverages the underutilized CPU, DRAM, and SSD resources of the GPU cluster to implement a disaggregated cache of KVCache. The core of Mooncake is its KVCache-centric scheduler, which balances maximizing overall effective throughput while meeting latency-related Service Level Objectives (SLOs). Unlike traditional studies that assume all requests will be processed, Mooncake faces challenges due to highly overloaded scenarios. To mitigate these, we developed a prediction-based early rejection policy. Experiments show that Mooncake excels in long-context scenarios. Compared to the baseline method, Mooncake can achieve up to a 525% increase in throughput in certain simulated scenarios while adhering to SLOs. Under real workloads, Mooncake's innovative architecture enables Kimi to handle 75% more requests.

Video diffusion models produce high-quality generations but remain slow at inference due to their sequential denoising procedure. Caching-based acceleration methods address this by reusing intermediate model outputs: leading dynamic approaches such as TeaCache, EasyCache, and DiCache accumulate a drift signal and skip expensive model evaluations when accumulated drift stays below a fixed threshold τ. This threshold controls an apparent tradeoff - raising it yields faster generation at the cost of visual quality, while lowering it preserves quality but sacrifices speed. We show this tradeoff is not fundamental; it is an artifact of holding τ constant throughout denoising. We identify the existence of critical steps - timesteps where the drift signal changes rapidly - and show that applying a low threshold selectively at these steps while caching aggressively elsewhere recovers most of the quality of conservative caching at substantially higher inference speeds. Building on this insight, we propose ACID, a lightweight, training-free wrapper that monitors the rate of change of each method's existing drift signal to dynamically switch between a low and a high threshold. ACID is signal-agnostic and modular: it requires no retraining and plugs directly into existing dynamic caching methods without modifying their core mechanisms. Evaluated across three caching methods (TeaCache, EasyCache, DiCache) and three open-source video diffusion models (HunyuanVideo, Wan 2.1, CogVideoX), ACID consistently expands the Pareto frontier of visual quality versus inference speed beyond what any fixed threshold achieves. In particular, on TeaCache and HunyuanVideo, ACID achieves up to 2.16x speedup over the no-caching baseline, and up to 38% additional speedup over the conservative fixed-threshold baseline with negligible (<0.3 dB PSNR, <0.01 SSIM, <0.01 LPIPS) quality degradation.

Diffusion models suffer from substantial computational overhead due to their inherently iterative inference process. While feature caching offers a promising acceleration strategy by reusing intermediate outputs across timesteps, naive reuse often incurs noticeable quality degradation. In this work, we formally analyze the cumulative error introduced by caching and decompose it into two principal components: feature shift error, caused by inaccuracies in cached outputs, and step amplification error, which arises from error propagation under fixed timestep schedules. To address these issues, we propose ERTACache, a principled caching framework that jointly rectifies both error types. Our method employs an offline residual profiling stage to identify reusable steps, dynamically adjusts integration intervals via a trajectory-aware correction coefficient, and analytically approximates cache-induced errors through a closed-form residual linearization model. Together, these components enable accurate and efficient sampling under aggressive cache reuse. Extensive experiments across standard image and video generation benchmarks show that ERTACache achieves up to 2x inference speedup while consistently preserving or even improving visual quality. Notably, on the state-of-the-art Wan2.1 video diffusion model, ERTACache delivers 2x acceleration with minimal VBench degradation, effectively maintaining baseline fidelity while significantly improving efficiency. The code is available at https://github.com/bytedance/ERTACache.

Reusing the attention KV cache across requests is a standard way to cut prefill cost in long-context LLM serving, and production systems increasingly back the per-engine cache with a remote tier shared by every engine. We study such a tier in a disaggregated deployment of GLM-5.3, an FP8 mixture-of-experts model with multi-head latent attention (MLA), on 8xB300 nodes running prefill context parallelism (PCP8). Enabling the remote tier (LMCache with a Valkey store) left median time-to-first-token unchanged but raised the 16k-token p99 from 3.96 s to 17.3 s. Replaying a production request stream on an isolated engine, we find that a remote hit took 0.88 s against 0.31 s to recompute the prompt, and that synchronous loading turned a hit-heavy stream into an unstable queue: p99 83.32 s with the GPUs 7% busy. A two-term cost model explains both: a hit pays off only if the tier delivers more than B* = sR (2.53 GB/s for this model and GPU), and a fixed per-hit engine cost (T0 ~ 0.33 s) means that hits on prompts shorter than about 17k tokens cannot beat recompute at any bandwidth. Guided by the model, we (i) shard the MLA KV store across PCP ranks, with a proof that the existing minimum-over-ranks lookup returns the longest cached prefix and a load protocol that can never desynchronize collectives; (ii) partition the remote tier by rank, one server instance per rank with no coordination, which raises GET bandwidth 6.3x to 10.76 GB/s; (iii) add asynchronous loading to the sharded store; and (iv) fix three client bugs that caused unbounded stalls. On the hit-heavy stream, with 98.5% of prompt tokens served from the remote tier, p99 falls from 83.32 s to 0.67 s. The sharded store raises prefill throughput by 14%, and by 34% together with an upstream kernel fix. All changes are submitted upstream to LMCache.

High throughput serving of large language models (LLMs) requires batching sufficiently many requests at a time. However, existing systems struggle because the key-value cache (KV cache) memory for each request is huge and grows and shrinks dynamically. When managed inefficiently, this memory can be significantly wasted by fragmentation and redundant duplication, limiting the batch size. To address this problem, we propose PagedAttention, an attention algorithm inspired by the classical virtual memory and paging techniques in operating systems. On top of it, we build vLLM, an LLM serving system that achieves (1) near-zero waste in KV cache memory and (2) flexible sharing of KV cache within and across requests to further reduce memory usage. Our evaluations show that vLLM improves the throughput of popular LLMs by 2-4times with the same level of latency compared to the state-of-the-art systems, such as FasterTransformer and Orca. The improvement is more pronounced with longer sequences, larger models, and more complex decoding algorithms. vLLM's source code is publicly available at https://github.com/vllm-project/vllm

The linear memory growth of the KV cache poses a significant bottleneck for LLM inference in long-context tasks. Existing static compression methods often fail to preserve globally important information. Although recent dynamic retrieval approaches attempt to address this issue, they typically suffer from coarse-grained caching strategies and incur high I/O overhead. To overcome these limitations, we propose HeteroCache, a training-free dynamic compression framework. Our method is built on two key insights: attention heads exhibit diverse temporal heterogeneity, and there is significant spatial redundancy among heads within the same layer. Guided by these insights, HeteroCache categorizes heads based on stability and similarity, applying a fine-grained weighting strategy that allocates larger cache budgets to heads with rapidly shifting attention to capture context changes. Furthermore, it features a hierarchical storage mechanism where representative heads monitor attention drift to trigger asynchronous, on-demand context retrieval, thereby hiding I/O latency. Experiments demonstrate that HeteroCache achieves state-of-the-art performance on long-context benchmarks and accelerates decoding by up to 3times compared to the original model with a 224K context. Our code is available at https://github.com/ponytaill/HeteroCache.

Large Language Models (LLMs) have recently experienced great success, as evident in the widespread popularity of ChatGPT. Existing LLM serving systems are stateless across requests. Consequently, when LLMs are used in the common setting of multi-turn conversations, a growing log of the conversation history must be processed alongside any request by the serving system at each turn, resulting in repeated history processing. In this paper, we design Pensieve, a system optimized for multi-turn conversation LLM serving. Pensieve maintains the conversation state across requests by caching previously processed history to avoid duplicate processing. Pensieve's multi-tier caching strategy can utilize both GPU and CPU memory to efficiently store and retrieve cached data. Pensieve also generalizes the recent PagedAttention kernel to support attention between multiple input tokens with a GPU cache spread over non-contiguous memory. Our evaluation shows that Pensieve is able to achieve 1.51-1.95x throughput compared to vLLM and reduce latency by 60-75%.

Long-context inference is increasingly constrained by the KV cache: resident memory grows with context length, and decoding becomes limited by repeated High Bandwidth Memory (HBM) streaming rather than arithmetic. Existing methods such as eviction, windowing, quantization, and offloading reduce footprint, but often leave the critical-path bottleneck only partially addressed, especially when compressed states must still be reconstructed into dense vectors during decoding. We present Spherical KV, a long-context inference method that treats KV allocation as a rate-distortion problem grounded in attention geometry for efficient decoding. The method is built on two ideas: (i) represent directional information cheaply in the decode hot loop, and (ii) allocate retention and precision according to estimated future utility. Its first component, Angle-Domain Attention (ADA), stores keys in a spherical parameterization consisting of a scalar radius and compact angle codes, and computes attention logits directly from these codes without reconstructing dense keys. This preserves a paged, block-local, fusion-friendly decode path and directly targets HBM traffic in realistic serving settings. Its second component, Rate-Distortion Retention (RDR), jointly chooses keep/drop decisions and precision tiers per token and head under a fixed budget, producing tier-homogeneous pages with lightweight metadata and coalesced reads. Together, ADA and RDR provide a deployment-oriented mechanism for reducing KV residency while preserving decode efficiency.

Large Language Models (LLMs) like ChatGPT and Llama have revolutionized natural language processing and search engine dynamics. However, these models incur exceptionally high computational costs. For instance, GPT-3 consists of 175 billion parameters, where inference demands billions of floating-point operations. Caching is a natural solution to reduce LLM inference costs on repeated queries, which constitute about 31% of the total queries. However, existing caching methods are incapable of finding semantic similarities among LLM queries nor do they operate on contextual queries, leading to unacceptable false hit-and-miss rates. This paper introduces MeanCache, a user-centric semantic cache for LLM-based services that identifies semantically similar queries to determine cache hit or miss. Using MeanCache, the response to a user's semantically similar query can be retrieved from a local cache rather than re-querying the LLM, thus reducing costs, service provider load, and environmental impact. MeanCache leverages Federated Learning (FL) to collaboratively train a query similarity model without violating user privacy. By placing a local cache in each user's device and using FL, MeanCache reduces the latency and costs and enhances model performance, resulting in lower false hit rates. MeanCache also encodes context chains for every cached query, offering a simple yet highly effective mechanism to discern contextual query responses from standalone. Our experiments benchmarked against the state-of-the-art caching method, reveal that MeanCache attains an approximately 17% higher F-score and a 20% increase in precision during semantic cache hit-and-miss decisions while performing even better on contextual queries. It also reduces the storage requirement by 83% and accelerates semantic cache hit-and-miss decisions by 11%.

Edge deployment of large language models (LLMs) increasingly relies on libraries of lightweight LoRA adapters, yet GPU/DRAM can keep only a small resident subset at a time. Serving a request through a non-resident adapter requires paging its weights from storage, incurring measurable latency. This creates a two-timescale online control problem: on a slow timescale, the system selects which adapters remain resident in fast memory, while on a fast timescale it routes each request to an adapter whose context-dependent utility is unknown a priori. The two decisions are tightly coupled: the cache determines the cost of exploration, and the router determines which adapters receive informative feedback. We formulate this joint caching-and-routing problem as a two-timescale contextual bandit and propose POLAR (Paging and Online Learning for Adapter Routing). POLAR pairs a cache-aware LinUCB router with an epoch-based cache controller. We study two variants. A fixed-epoch version provides a robust baseline with worst-case regret guarantees under arbitrary contexts. An epoch-doubling version, POLAR+, adds forced exploration and improved cache optimization to achieve mathcal{O}(dNT+KT) sublinear regret under stochastic regularity and cacheability conditions, where N is the adapter count, K the cache size, d the context dimension, and T the horizon. The routing term matches the standard contextual-bandit rate up to logarithmic factors, showing that the memory hierarchy does not fundamentally slow routing learning. Experiments using 15 real LoRA adapters for Qwen2.5-7B together with measured GPU paging latencies show that adaptive cache control substantially outperforms non-adaptive baselines and exhibits scaling trends consistent with the theory.

Large language model (LLM) agents repeatedly load reusable content, such as skills, documents, and memory entries, into the current context. Re-encoding this content for every request wastes computation. Position-independent caching (PIC) alleviates this by encoding each artifact independently and reusing its key-value (KV) states at arbitrary positions, but it incurs a quality loss relative to full-context prefill. Existing methods repair this loss by restoring global position IDs or recomputing selected tokens. In this work, we isolate the source of the loss, finding that the positional mismatch has minor effect, and independently cached artifacts retain faithful representations: reading a provided artifact stays largely accurate, and performance degrades only when the model must select among multiple artifacts. Moreover, replacing PIC's attention scores with full-prefill scores recovers performance with the cached KV unchanged, localizing the failure to the attention rather than KV recomputation. Motivated by this, we propose Attuner, a query-side adaptation method that learns to read a frozen artifact cache. Attuner inserts low-rank adapters into the query projections and is trained by distilling full-prefill distribution into the student. It trains fewer than 0.05\% of the model parameters and, at inference, requires neither cache recomputation nor a full-context reference. On Qwen3-4B and Qwen3-8B across seven benchmarks covering skills, documents, memory, and code, Attuner substantially outperforms prior PIC baselines in both in-domain and out-of-domain settings, matches full-context prefill quality while providing up to 3.73times speedup.

The key-value (KV) cache is a foundational optimization in Transformer-based large language models (LLMs), eliminating redundant recomputation of past token representations during autoregressive generation. However, its memory footprint scales linearly with context length, imposing critical bottlenecks on GPU memory capacity, memory bandwidth, and inference throughput as production LLMs push context windows from thousands to millions of tokens. Efficient KV cache management has thus become a first-order challenge for scalable LLM deployment. This paper provides a systematic review of recent KV cache optimization techniques, organizing them into five principal directions: cache eviction, cache compression, hybrid memory solutions, novel attention mechanisms, and combination strategies. For each category we analyze the underlying mechanisms, deployment trade-offs, and empirical performance across memory reduction, throughput, and model accuracy metrics. We further map techniques to seven practical deployment scenarios, including long-context single requests, high-throughput datacenter serving, edge devices, multi-turn conversations, and accuracy-critical reasoning, providing actionable guidance for practitioners selecting among competing approaches. Our analysis reveals that no single technique dominates across all settings; instead, the optimal strategy depends on context length, hardware constraints, and workload characteristics, pointing toward adaptive, multi-stage optimization pipelines as a promising direction for future research.

Edge LLMs must preserve inference continuity when a user hands over between edge nodes, requiring key-value (KV) cache transfer to the target node. However, simultaneous handovers saturate the backhaul, preventing full cache delivery within the mobility-imposed transfer window. Rather than allocating bandwidth as if all cache entries were equally valuable, we order each user's KV cache by importance and transmit only its most informative fraction, turning token-level sparsity into communication savings. We cast the transfer as a multi-user backhaul allocation problem that maximizes average accuracy across users. Each user's partial-cache accuracy serves as its utility: a sigmoid that fits measurements on the RULER benchmark with R^2>0.99 across models and context lengths. Because importance ordering front-loads the high-value entries, the concave region of the accuracy curve spans nearly the entire cache. Our proposed allocator keeps served users within this region, making each per-slot allocation problem convex. The optimum is derived via a closed-form weighted water-filling solution that generalizes information-theoretic water-filling and enables online scheduling. The proposed allocator attains over 93.7% average accuracy in a 500ms transfer window, within 0.5pp of the full-cache ceiling, and reaches 98.2-99.5% of a clairvoyant upper bound.

Hybrid LLMs interleave full-attention layers with linear-attention layers to reduce long-context inference cost, but this structure complicates prefix caching. Full-attention KV caches are token-addressable, whereas linear-attention layers maintain recurrent states that cannot be rolled back to arbitrary prefix boundaries. Existing systems materialize recurrent-state checkpoints, restricting prefix reuse to checkpoint-aligned positions. We present SuffixReplay, the first prefix caching system that lets hybrid LLMs reuse cached prefixes at every cache-supported page boundary without materializing recurrent-state checkpoints. Our key insight is to just let linear states forget the distant past. Modern linear-attention mechanisms use recurrent decay and gating to attenuate the influence of old inputs. Therefore, instead of checkpointing every prefix boundary, SuffixReplay approximates the state at a matched boundary by replaying only a recent suffix of the layer's input hidden states, which we retain as anchors. At the algorithmic level, SuffixReplay combines layer-wise and token-wise anchor sparsity with a bounded replay budget to control storage, computation, and quality. At the system level, it uses an independently managed anchor sidecar and a pipelined replay path to overlap anchor movement and state reconstruction with the native serving pipeline. We evaluate SuffixReplay on three hybrid LLMs: OLMo-Hybrid-7B, Qwen3.5-4B, and Qwen3.6-27B-FP8. Across these models, SuffixReplay retains 91.4-100% of full-prefill quality on average across LongBench and RULER, while using only 0.36-0.51x the amortized per-token storage of SGLang's default 8192-token checkpoint cache. Integrated into SGLang, SuffixReplay reduces median TTFT by 15-70% on branching workloads, sustains 2.3-4.3x SGLang's throughput when the working set exceeds HBM, and matches SGLang on high-hit continuation traffic.

Test-time search lets small video diffusion models rival larger ones, but costs 2-10x more. All candidates are fully denoised, although most are discarded. Training-free caching makes each rollout 2-3x faster at near-lossless quality. Composition is safe only if lossy caching preserves verifier rankings. We present the first study of whether caching corrupts candidate ranking in video test-time search. On Wan2.1-T2V-1.3B with an adaptive caching wrapper (~2x per-candidate speedup), ImageReward scores seed-matched cached and full rollouts. Median per-prompt Spearman rank correlation is 0.905, with 72% top-1 agreement on the VBench suite. VBench-2.0 replicates this result on a harder suite. Recomputing the cached winner at full compute retains 90-94% of the full-search gain. Errors cluster among near-tied candidates, making corruption self-limiting. This finding leads to CachedSearch. It explores every candidate with aggressive caching, then re-generates only the winner at full compute. At N=8, it captures 94.7% of best-of-N's gain at 63% of the cost. Capture rises with width. At matched budget, it searches twice as wide for 38% more gain. The result holds from 1.3B-14B across six models and four families: Wan, LTX, CogVideoX, and Hunyuan. Wan2.1-14B matches the 1.3B model's fidelity. Mid-trajectory pruning multiplies the exploration saving to 3.11x at 88.6% capture. Ports to other model families require recalibrating a single parameter, showing that fidelity tracks architecture rather than parameter count. CachedSearch is training-free, verifier-agnostic, and orthogonal to the search algorithm, making it a plug-in multiplier for test-time scaling.

The memory and computational demands of Key-Value (KV) cache present significant challenges for deploying long-context language models. Previous approaches attempt to mitigate this issue by selectively dropping tokens, which irreversibly erases critical information that might be needed for future queries. In this paper, we propose a novel compression technique for KV cache that preserves all token information. Our investigation reveals that: i) Most attention heads primarily focus on the local context; ii) Only a few heads, denoted as retrieval heads, can essentially pay attention to all input tokens. These key observations motivate us to use separate caching strategy for attention heads. Therefore, we propose RazorAttention, a training-free KV cache compression algorithm, which maintains a full cache for these crucial retrieval heads and discards the remote tokens in non-retrieval heads. Furthermore, we introduce a novel mechanism involving a "compensation token" to further recover the information in the dropped tokens. Extensive evaluations across a diverse set of large language models (LLMs) demonstrate that RazorAttention achieves a reduction in KV cache size by over 70% without noticeable impacts on performance. Additionally, RazorAttention is compatible with FlashAttention, rendering it an efficient and plug-and-play solution that enhances LLM inference efficiency without overhead or retraining of the original model.

Point-cloud streams are central to autonomous driving and robotics, yet existing segmentation networks process every frame from scratch, although consecutive frames largely overlap. We observe that the intermediate features of point-cloud transformers remain semantically consistent across frames for the same spatial region, especially in deep stages. Building on this, we present SpaceCache, a training-free feature cache that reuses these features across frames. Tokens of previously observed regions skip a sequence of transformer blocks and take their cached features, only the remaining tokens are computed, and the full token layout is restored for dense prediction. Lightweight cache management keeps reused features reliable by limiting each entry's age and evicting low-confidence entries. Unlike token merging, SpaceCache selects tokens at negligible cost and runs its cache operations once per encoder stage. On both outdoor and indoor benchmarks, such as nuScenes, Waymo, and ScanNet, with two transformer backbones of Utonia and LitePT-B, SpaceCache achieves up to 1.65x speedup with less than 1-point mIoU drop and consistently outperforms token-merging methods.

Diffusion models achieve state-of-the-art video generation quality, but their inference remains expensive due to the large number of sequential denoising steps. This has motivated a growing line of research on accelerating diffusion inference. Among training-free acceleration methods, caching reduces computation by reusing previously computed model outputs across timesteps. Existing caching methods rely on heuristic criteria to choose cache/reuse timesteps and require extensive tuning. We address this limitation with a principled sensitivity-aware caching framework. Specifically, we formalize the caching error through an analysis of the model output sensitivity to perturbations in the denoising inputs, i.e., the noisy latent and the timestep, and show that this sensitivity is a key predictor of caching error. Based on this analysis, we propose Sensitivity-Aware Caching (SenCache), a dynamic caching policy that adaptively selects caching timesteps on a per-sample basis. Our framework provides a theoretical basis for adaptive caching, explains why prior empirical heuristics can be partially effective, and extends them to a dynamic, sample-specific approach. Experiments on Wan 2.1, CogVideoX, and LTX-Video show that SenCache achieves better visual quality than existing caching methods under similar computational budgets.

Large Language Model (LLM) agents can handle increasingly complex tasks, navigating long trajectories of observations and actions. As these trajectories grow, key-value (KV) cache I/O and storage become the dominant cost. Trajectories can also exceed the LLM's maximum context length, requiring control over active cache growth. Prior work uses context engineering to reduce cache size by trimming or summarizing history. However, modifying the trajectory prefix invalidates subsequent cached states and triggers costly re-prefilling of retained context. Task accuracy can also suffer when too little context is retained to limit re-prefill costs. We propose cache engineering as a new scheme. It allows agents to directly control their active KV cache without modifying the trajectory or re-prefilling retained context. Specifically, agents can proactively use drop to exclude selected cache from future attention and repos to adjust retained keys' position encodings. We formalize these cache operations and identify history dependence as a serving challenge: identical token sequences can yield different cache states under different cache operation sequences, making prefix matching insufficient for correct cache reuse. Thus, we co-design the AKV serving engine. It provides a stateless interface compatible with existing serving APIs, while internally managing stateful cache reuse, eviction, and restoration. Experiments show that a tool-response rolling-drop cache policy improves average benchmark scores by 1.7 points and reduces average cost by 27.7%, compared with conventional threshold-triggered summarization. With AKV, it achieves up to 1.2x the output throughput and a 1.5x speedup in P95 request latency. Recursive self-improvement of cache policies further reduces cost by 7.1% over expert design. Our code is at https://github.com/thu-nics/AKV.

Diffusion models have achieved remarkable success in image and video generation, yet the high computational cost of iterative sampling remains a critical bottleneck for practical deployment. Feature caching has emerged as a promising acceleration paradigm by reusing or predicting intermediate features across timesteps. However, existing training-free methods apply uniform prediction strategies that cannot adapt to the heterogeneous feature dynamics, causing significant quality degradation under high acceleration ratios. We propose LinCa, a feature caching framework based on learnable invertible networks. LinCa decomposes cached features into sub-components with distinct continuity properties via a lightweight invertible network and applies differentiated prediction orders matched to each component. The strict invertibility guarantees lossless reconstruction back to the original feature space, forming a unified Decompose-Predict-Reconstruct pipeline. By training separate predictors for different models and timestep segments, LinCa adapts to heterogeneous feature dynamics. Experiments on FLUX, Qwen-Image, and HunyuanVideo demonstrate that LinCa, with less than 0.2% additional parameters, significantly outperforms existing methods and maintains near-lossless quality at 5-7x speedup. Code: https://github.com/QHR69/LinCa

Context-heavy agents place unusual pressure on the key-value (KV) cache: long prefixes are reused across many short turns, while concurrency determines whether the serving system can keep GPUs utilized. We study 4-bit KV-cache compression for this setting, using TurboQuant-style rotation and codebook quantization as a quality anchor and vLLM FP8 KV caching as the deployment anchor. We report three contributions. First, we frame 4-bit KV caching around multi-round agent workloads where task quality, cache residency, and serving throughput must be measured jointly. Second, we describe the practical design choices needed to make the 4-bit path robust, including asymmetric K/V treatment, Walsh-Hadamard rotation, QJL removal, and block-scale variants. Third, we present serving optimizations on AMD GPUs, including optimized decode-attention kernels and UltraQuant, an FP4 approximation path that uses FP8 queries, FP4 KV tensors, UE8M0 group scales, and native scaled-MFMA support on CDNA4. On a long-context, multi-turn agentic workload, UltraQuant cuts P50 time-to-first-token by 3.47x in the cache-pressured late rounds (2.3x across all rounds) and raises output throughput by 1.63x over the FP8 KV baseline.

Diffusion models have demonstrated remarkable success in image and video generation, yet their practical deployment remains hindered by the substantial computational overhead of multi-step iterative sampling. Among acceleration strategies, caching-based methods offer a training-free and effective solution by reusing or predicting features across timesteps. However, existing approaches rely on fixed or locally adaptive schedules without considering the global structure of the denoising trajectory, often leading to error accumulation and visual artifacts. To overcome this limitation, we propose DPCache, a novel training-free acceleration framework that formulates diffusion sampling acceleration as a global path planning problem. DPCache constructs a Path-Aware Cost Tensor from a small calibration set to quantify the path-dependent error of skipping timesteps conditioned on the preceding key timestep. Leveraging this tensor, DPCache employs dynamic programming to select an optimal sequence of key timesteps that minimizes the total path cost while preserving trajectory fidelity. During inference, the model performs full computations only at these key timesteps, while intermediate outputs are efficiently predicted using cached features. Extensive experiments on DiT, FLUX, and HunyuanVideo demonstrate that DPCache achieves strong acceleration with minimal quality loss, outperforming prior acceleration methods by +0.031 ImageReward at 4.87times speedup and even surpassing the full-step baseline by +0.028 ImageReward at 3.54times speedup on FLUX, validating the effectiveness of our path-aware global scheduling framework. Code is available at https://github.com/argsss/DPCache.

Mainstream LLM serving systems reuse prefix work mainly through paged or radix key-value (KV) caches. This is highly effective for high-throughput, high-concurrency serving, but it manages only one positional fragment of execution state: the KV cache. We study the opposite regime: low-latency, small-batch, on-device physical-AI serving, where interactive LLM agents, speech systems, and robot policies repeatedly branch, reset, interrupt, and re-enter under tight responsiveness budgets. We introduce execution-state capsules, a graph-bound checkpoint and restore mechanism for the complete restorable state at a committed boundary. FlashRT is a white-box, backend-facing kernel runtime whose evaluated NVIDIA CUDA backend runs captured graph plans over contiguous static buffers with no block-table indirection. Because the live state is a closed set of named buffers, a capsule can snapshot, restore, fork, or roll back the whole execution boundary, including KV, recurrent state, convolution state, MTP state, and metadata. This moves reuse from token-addressed KV fragments to graph-bound execution-state boundaries. On an RTX 5090, capsule restore is byte-exact at the stored-state level and token-identical under greedy decode. A KV-only ablation diverges, showing that recurrent state is load-bearing. GPU-resident snapshot and restore are sub-millisecond, and TTFT speedup over cold prefill grows from 3.9x at 2k tokens to 27x at 16k tokens. On Jetson AGX Thor and DGX Spark, the same correctness and structural properties hold. Capsules are not a replacement for high-throughput KV-cache serving; they define a complementary latency-first serving point for explicit execution-state reuse.

Training billion-parameter models requires distributing model states across GPUs using fully sharded data parallel (i.e., ZeRO-3). While ZeRO-3 succeeds on clusters with high-bandwidth NVLink and InfiniBand interconnects, researchers with commodity hardware face severe inter-node all-gather bottlenecks. Existing optimizations take two approaches: GPU memory caching (MiCS, ZeRO++) trades memory capacity for reduced communication, triggering out-of-memory failures on large models; host memory offloading (ZeRO-Offload, ZeRO-Infinity) extends capacity but degrades throughput due to PCIe overhead. We observe that on bandwidth-limited clusters, host memory can serve not as an overflow tier but as a fast caching layer that outperforms inter-node communication. Based on this insight, we propose FCDP, which eliminates redundant inter-node communication while preserving ZeRO-3's minimal GPU memory footprint. FCDP caches forward-pass parameters in host memory and reuses them during the backward pass via fast intra-node all-gather, reducing inter-node all-gather by 50%. For parameter-efficient fine-tuning (PEFT), FCDP selectively communicates only trainable parameters to maximize caching, reducing inter-node traffic by over 99%. In our commodity cluster setup, FCDP achieves up to 100x higher throughput than ZeRO-3 and 51x higher than ZeRO++, while maintaining ZeRO-3's maximum batch size.

In the field of instruction-following large vision-language models (LVLMs), the efficient deployment of these models faces challenges, notably due to the high memory demands of their key-value (KV) caches. Conventional cache management strategies for LLMs focus on cache eviction, which often fails to address the specific needs of multimodal instruction-following models. Recognizing this gap, in this paper, we introduce Elastic Cache, a novel approach that benefits from applying distinct acceleration methods for instruction encoding and output generation stages. We investigate the metrics of importance in different stages and propose an importance-driven cache merging strategy to prune redundancy caches. Instead of discarding less important caches, our strategy identifies important key/value vectors as anchor points. Surrounding less important caches are then merged with these anchors, enhancing the preservation of contextual information in the KV caches while yielding an arbitrary acceleration ratio. For instruction encoding, we utilize the frequency to evaluate the importance of caches. Regarding output generation, we prioritize tokens based on their distance with an offset, by which both the initial and most recent tokens are retained. Results on a range of LVLMs demonstrate that Elastic Cache not only boosts efficiency but also notably outperforms existing pruning methods in language generation across various tasks. Code is available at https://github.com/liuzuyan/ElasticCache

Coding agents repeatedly search, navigate, and retain context from evolving repositories, but disconnected indexes, language servers, and task-local histories force repeated discovery and obscure lifecycle costs. CodeNib builds reusable lexical, dense, and structural views per repository commit, maps outputs to repository-relative source ranges, maintains selected views across edits, and serves ranked search, symbol navigation, and bounded context through one runtime. Across 100 snapshots, we map quality-cost frontiers across the repository-context lifecycle. When outputs match an independent rebuild, graph and vector updates are 8.7times and 25.4times faster at the median. On the static-navigation subset matching normalized live-server locations (63% of 1,000 requests), the median per-request live/static latency ratio is 4.7times. Across five models, selected context policies preserve localization with 50--87% fewer trajectory tokens than paired grep/read. Together, these results support multi-view repository-context serving with explicit, operation-specific validity boundaries.

The Key-Value (KV) cache of Large Language Models (LLMs) is prefix-based, making it highly inefficient for processing contexts retrieved in arbitrary order. Position-Independent Caching (PIC) has been proposed to enable KV reuse without positional constraints; however, existing approaches often incur substantial accuracy degradation, limiting their practical adoption. To address this issue, we propose native PIC by reintroducing the encoder to prevalent decoder-only LLMs and explicitly training it to support PIC. We further develop COMB, a PIC-aware caching system that integrates seamlessly with existing inference frameworks. Experimental results show that COMB reduces Time-to-First-Token (TTFT) by 51-94% and increases throughput by 3times with comparable accuracy. Furthermore, the quality improvement when using DeepSeek-V2-Lite-Chat demonstrates the applicability of COMB to other types of decoder-only LLMs. Our code is available at https://github.com/shijuzhao/Comb.

Large language models (LLMs) have excelled in various applications, yet serving them at scale is challenging due to their substantial resource demands and high latency. Our real-world studies reveal that over 70% of user requests to LLMs have semantically similar counterparts, suggesting the potential for knowledge transfer among requests. However, naively caching and reusing past responses leads to a big quality drop. In this paper, we introduce IC-Cache, a caching system that enables live LLM capability augmentation to improve serving efficiency: by leveraging historical request-response pairs from larger models as in-context examples, IC-Cache empowers small LLMs to imitate and even exceed the compositional abilities (e.g., reasoning) of their larger counterparts, enabling selective offloading of requests to reduce cost and latency. Achieving this live augmentation at scale introduces intricate trade-offs between response quality, latency, and system throughput. For a new request, IC-Cache efficiently selects similar, high-utility examples to prepend them to the new request's input. At scale, it adaptively routes requests across LLMs of varying capabilities, accounting for response quality and serving loads. IC-Cache employs a cost-aware cache replay mechanism that refines example quality offline to maximize online cache utility and efficiency. Evaluations on millions of realistic requests demonstrate that IC-Cache improves LLM serving throughput by 1.4-5.9x and reduces latency by 28-71% without hurting response quality.

KV cache has traditionally been stored in GPU memory to accelerate the decoding phase of large language model (LLM) inference. However, it is increasingly necessary to move KV caches outside GPU devices, to enable cache reuse across different queries and inference engines. Our real-world usage statistics confirm this trend: over time, the total KV cache stored by users has grown rapidly, far exceeding the capacity of GPU memory. Despite this need, there lacks an efficient solution for offloading and transferring KV caches. We present LMCACHE, the first and so far the most efficient open-source KV caching solution, which extracts and stores KV caches generated by modern LLM engines (vLLM and SGLang) out of the GPU memory and shares them across engines and queries. LMCACHE supports both cache offloading (prefix reuse across queries) and prefill-decode (PD) disaggregation (cross-engine/GPU cache transfer). LMCACHE's high performance and wide adoption stem from the following contributions: (1) highly optimized KV cache data movement powered by batched data movement operations, compute and I/O pipelining; (2) a modular KV cache connector component, decoupling LMCACHE from the rapid evolution of inference engines; (3) a first-class control API for flexible cache orchestration across GPU, CPU, storage, and network layers. Our evaluation shows that combining LMCACHE with vLLM achieves up to 15x improvement in throughput across workloads such as multi-round question answering and document analysis. Large-scale adoption of LMCACHE in enterprise settings provides us valuable insights, for example, fetching KV cache from remote storage has unsurprisingly benefits to prefill delay, and that context truncation, which is a widely applied technique in industry, can greatly reduce prefix cache hit ratio by half. The source code of LMCACHE is at: https://github.com/LMCache/LMCache.

KV-cache memory is a major bottleneck in real-world LLM serving, where systems must simultaneously support latency-sensitive small-batch requests and high-throughput concurrent workloads. Although many KV-cache compression methods improve offline accuracy or compression ratio, they often violate practical serving constraints such as paged memory layouts, regular memory access, and fused attention execution, limiting their effectiveness in deployment. In this work, we identify the minimal set of 4-bit KV-cache quantization methods that remain viable under these constraints. Our central finding is that a simple design--token-wise INT4 quantization with block-diagonal Hadamard rotation--consistently achieves the best accuracy-efficiency trade-off. Across multiple models and benchmarks, this approach recovers nearly all of the accuracy lost by naive INT4, while more complex methods such as vector quantization and Hessian-aware quantization provide only marginal additional gains once serving compatibility is taken into account. To make this practical, we implement a fused rotation-quantization kernel that integrates directly into paged KV-cache layouts and introduces zero measurable end-to-end overhead, matching plain INT4 throughput across concurrency levels. Our results show that effective KV-cache compression is fundamentally a systems co-design problem: under real serving constraints, lightweight block-diagonal Hadamard rotation is a viable method that delivers near-lossless accuracy without sacrificing serving efficiency.

This report investigates enhancing semantic caching effectiveness by employing specialized, fine-tuned embedding models. Semantic caching relies on embedding similarity rather than exact key matching, presenting unique challenges in balancing precision, query latency, and computational efficiency. We propose leveraging smaller, domain-specific embedding models, fine-tuned with targeted real-world and synthetically generated datasets. Our empirical evaluations demonstrate that compact embedding models fine-tuned for just one epoch on specialized datasets significantly surpass both state-of-the-art open-source and proprietary alternatives in precision and recall. Moreover, we introduce a novel synthetic data generation pipeline for the semantic cache that mitigates the challenge of limited domain-specific annotated data, further boosting embedding performance. Our approach effectively balances computational overhead and accuracy, establishing a viable and efficient strategy for practical semantic caching implementations.

Long-running LLM applications repeatedly send growing context, making prefix caching critical for reducing prefill cost. Yet prefix-cache behavior under agentic workloads remains poorly understood. We study production traces from two companies and evaluate 14 eviction algorithms across HBM-constrained and large memory-pool settings. Despite a large gap to Belady, sophisticated policies designed for traditional caches provide little benefit over LRU. The reason is structural: prefix reuse is dominated by the regular pacing of active sessions, making recency unusually predictive. Prefix caching nevertheless introduces new challenges, including heavy-tailed session footprints and highly variable miss costs as attention computation grows with sequence length. We introduce the compute-savings ratio and two offline oracles to quantify these effects. Our results show that effective prefix-cache management should retain recency as its foundation while selectively adding quick demotion for one-hit prefixes, compute-aware partial eviction for expensive misses, and capacity-dependent eviction granularity. We will release the traces and simulator to support future research.

Diffusion and flow models generate a sample over iterative steps, each a full pass through a large network, and that pass dominates generation cost. Training-free caching accelerates them by reusing activations from recent evaluations instead of recomputing them. Dynamic caching methods decide when to refresh by accumulating a cheap probe of the network input into a staleness signal and spending a fresh evaluation once it crosses a threshold. They perform hard caching: the signal is a binary switch between refresh and reuse, and every step, fresh or cached, advances by the prescribed step size. We observe that the signal carries much more than this switch. How far it sits below the threshold, its headroom, predicts the error induced by reuse. We propose SoftCache, which performs soft caching: instead of a binary switch, the headroom sets how far each cached step goes. Where the headroom is large, the sampler jumps past several scheduled nodes, and as a refresh nears, its steps shrink back toward the original step. These adaptive jumps may land between the scheduled nodes, taking the sampler off its fixed grid. SoftCache requires no training and adds no per-backbone settings: on FLUX for images and on HunyuanVideo and Wan2.1 for video, at speedups from 3.5times to 6.9times, it is ahead of every baseline on all four fidelity metrics.

AI-powered search products such as ChatGPT search, Google's AI Overviews, and Perplexity provide LLM-synthesized answers grounded in live web results. We developed OreoLook (formerly lixSearch), an open-source answer engine using automated browser agents and provider-routed LLM inference. Its local search, caching, session-management, and embedding stack runs on commodity CPU hardware; answer synthesis is performed by a remote inference provider. As usage grew, sessions lost context, equivalent queries triggered redundant work, and URLs were repeatedly embedded across sessions. We present a three-layer caching architecture: (1) a Session Context Window maintaining a rolling window of recent messages in Redis with automatic overflow to Huffman-compressed disk archives; (2) a Semantic Query Cache catches rephrasings via cosine similarity on embedding vectors, eliminating redundant LLM invocations; and (3) a URL Embedding Cache that deduplicates embedding computations across sessions. Deployed on a single 8-vCPU Intel Cascade Lake server (2 GHz, 32 GB RAM) running 30 Hypercorn worker processes across three containerized replicas, the evaluated system reported an 89.3% aggregate Redis keyspace hit rate with 0.1 ms read latency and just 1.38 MB of memory overhead. A background LRU eviction daemon migrates idle sessions from Redis to disk and re-hydrates them on demand, enabling conversations that can be resumed hours or days later under the configured retention policy.

Multi-agent LLM applications organize execution in synchronized rounds where a central scheduler gathers outputs from all agents and redistributes the combined context. This All-Gather communication pattern creates massive KV Cache redundancy, because every agent's prompt contains the same shared output blocks, yet existing reuse methods fail to exploit it efficiently. We present TokenDance, a system that scales the number of concurrent agents by exploiting the All-Gather pattern for collective KV Cache sharing. TokenDance's KV Collector performs KV Cache reuse over the full round in one collective step, so the cost of reusing a shared block is paid once regardless of agent count. Its Diff-Aware Storage encodes sibling caches as block-sparse diffs against a single master copy, achieving 11-17x compression on representative workloads. Evaluation on GenerativeAgents and AgentSociety shows that TokenDance supports up to 2.7x more concurrent agents than vLLM with prefix caching under SLO requirement, reduces per-agent KV Cache storage by up to 17.5x, and achieves up to 1.9x prefill speedup over per-request position-independent caching.

Similarity search is a key operation in multimedia retrieval systems and recommender systems, and it will play an important role also for future machine learning and augmented reality applications. When these systems need to serve large objects with tight delay constraints, edge servers close to the end-user can operate as similarity caches to speed up the retrieval. In this paper we present AÇAI, a new similarity caching policy which improves on the state of the art by using (i) an (approximate) index for the whole catalog to decide which objects to serve locally and which to retrieve from the remote server, and (ii) a mirror ascent algorithm to update the set of local objects with strong guarantees even when the request process does not exhibit any statistical regularity.

Diffusion Transformers (DiT) excel in video generation but encounter significant computational challenges due to the quadratic complexity of attention. Notably, attention differences between adjacent diffusion steps follow a U-shaped pattern. Current methods leverage this property by caching attention blocks, however, they still struggle with sudden error spikes and large discrepancies. To address these issues, we propose UniCP a unified caching and pruning framework for efficient video generation. UniCP optimizes both temporal and spatial dimensions through. Error Aware Dynamic Cache Window (EDCW): Dynamically adjusts cache window sizes for different blocks at various timesteps, adapting to abrupt error changes. PCA based Slicing (PCAS) and Dynamic Weight Shift (DWS): PCAS prunes redundant attention components, and DWS integrates caching and pruning by enabling dynamic switching between pruned and cached outputs. By adjusting cache windows and pruning redundant components, UniCP enhances computational efficiency and maintains video detail fidelity. Experimental results show that UniCP outperforms existing methods in both performance and efficiency.

Diffusion models have achieved impressive generative quality across modalities like 2D images, videos, and 3D shapes, but their inference remains computationally expensive due to the iterative denoising process. While recent caching-based methods effectively reuse redundant computations to speed up 2D and video generation, directly applying these techniques to 3D diffusion models can severely disrupt geometric consistency. In 3D synthesis, even minor numerical errors in cached latent features accumulate, causing structural artifacts and topological inconsistencies. To overcome this limitation, we propose Fast3Dcache, a training-free geometry-aware caching framework that accelerates 3D diffusion inference while preserving geometric fidelity. Our method introduces a Predictive Caching Scheduler Constraint (PCSC) to dynamically determine cache quotas according to voxel stabilization patterns and a Spatiotemporal Stability Criterion (SSC) to select stable features for reuse based on velocity magnitude and acceleration criterion. Comprehensive experiments show that Fast3Dcache accelerates inference significantly, achieving up to a 27.12% speed-up and a 54.8% reduction in FLOPs, with minimal degradation in geometric quality as measured by Chamfer Distance (2.48%) and F-Score (1.95%).

When a Mixture-of-Experts (MoE) model does not fit in GPU memory, batch-1 decoding is dominated by copying expert weights from host memory. Cache-aware routing reduces these copies by biasing the router toward resident experts, but combined with asynchronous prefetching it makes the model's outputs depend on transfer timing, so a harness that does not simulate that timing no longer evaluates the deployed model. We propose prefetch-steered routing (PSR): routing conditions on a deterministic logical cache, into which at most n experts predicted by the next layer's router are inserted per layer and token; physical copies affect only latency. On OLMoE-1B-7B with 50% and 25% of experts resident on an RTX 4090, PSR decodes 2.2-2.3x faster than exact routing with LRU and 25-30% faster than the Cache-Prior operating point, with mean benchmark differences of +0.1 and +0.5 points (95% lower bounds -0.8 and -0.3). In greedy generation its lead over Cache-Prior depends on the workload and reverses on HumanEval at 50% residency. On Moonlight-16B-A3B, PSR is 1.9x faster than exact routing with LRU at 37.5% residency and, at the latency of Cache-Prior, significantly better on three of eight benchmarks. On Qwen3.6-35B-A3B, where copies are cheap relative to computation, PSR keeps its advantage over Cache-Prior on the likelihood benchmarks but not its speed. Distillation-trained gates did not help. Speculative decoding with block-level expert selection was slower than PSR with a 1B autoregressive drafter on OLMoE, but with a block drafter on Qwen3.6 it was 2.1-2.9x faster than any autoregressive configuration with at most its GPU memory on the 64 prompts we timed.

When a camera revisits a previously observed region, a video world model should reproduce what was there before. This requires both remembering past observations and retrieving the right one for the current viewpoint. Key-value caches preserve visual detail but grow with video length; recurrent memory is compact but compresses history into a fixed-size state, so individual past observations are no longer directly accessible. We introduce LOCI, a hybrid spatial-memory architecture that keeps both representations. In half of the transformer blocks, main attention keeps a key-value cache of past observations; in the other half, it is restricted to the current chunk and complemented by a recurrent linear-attention memory whose reads and writes are conditioned on projective camera geometry, so viewpoint enters both memory addressing and stored content. Recurrent readouts flow into subsequent cache-backed blocks and supply their queries with accumulated scene context. On the public MIND memory benchmark and on held-out recorded trajectories, LOCI reproduces revisited content more faithfully than representative world models and a same-recipe full-softmax model; with full history, it lowers peak memory at equal length by about 30% relative to full softmax. With a bounded bank of retained observations, it streams long videos at constant memory and remains more faithful than full softmax under the same budget.

Multi-modal Large Language Models (MLLMs) serving systems commonly employ KV-cache compression to reduce memory footprint. However, existing compression methods introduce significant processing overhead and queuing delays, particularly in concurrent serving scenarios. We present FastCache, a novel serving framework that effectively addresses these challenges through two key innovations: (1) a dynamic batching strategy that optimizes request scheduling across prefill, compression, and decode stages, and (2) an efficient KV-cache memory pool mechanism that eliminates memory fragmentation while maintaining high GPU utilization. Our comprehensive experiments on the GQA and MileBench datasets demonstrate that FastCache achieves up to 19.3times reduction in Time-To-First-Token (TTFT) and 12.1times improvement in throughput compared to state-of-the-art baselines. The system maintains stable performance under high-concurrency scenarios (up to 40 req/s) while reducing average memory consumption by 20\%. These results establish FastCache as an efficient solution for real-world LLM serving systems with KV-cache compression.

Despite the rapid advancements of large language models (LLMs), LLM serving systems remain memory-intensive and costly. The key-value (KV) cache, which stores KV tensors during autoregressive decoding, is crucial for enabling low-latency, high-throughput LLM inference serving. In this survey, we focus on system-aware KV infrastructure for serving LLMs (abbreviated as sKis). We revisit recent work from a system behavior perspective, organizing existing efforts into three dimensions: execution and scheduling (temporal), placement and migration (spatial), and representation and retention (structural). Furthermore, we analyze cross-behavior co-design affinity and behavior-objective links, highlighting future opportunities. Our work systematizes a rapidly evolving area, providing a foundation for understanding and innovating KV cache designs in modern LLM serving infrastructure.

We present LeMiCa, a training-free and efficient acceleration framework for diffusion-based video generation. While existing caching strategies primarily focus on reducing local heuristic errors, they often overlook the accumulation of global errors, leading to noticeable content degradation between accelerated and original videos. To address this issue, we formulate cache scheduling as a directed graph with error-weighted edges and introduce a Lexicographic Minimax Path Optimization strategy that explicitly bounds the worst-case path error. This approach substantially improves the consistency of global content and style across generated frames. Extensive experiments on multiple text-to-video benchmarks demonstrate that LeMiCa delivers dual improvements in both inference speed and generation quality. Notably, our method achieves a 2.9x speedup on the Latte model and reaches an LPIPS score of 0.05 on Open-Sora, outperforming prior caching techniques. Importantly, these gains come with minimal perceptual quality degradation, making LeMiCa a robust and generalizable paradigm for accelerating diffusion-based video generation. We believe this approach can serve as a strong foundation for future research on efficient and reliable video synthesis. Our code is available at :https://github.com/UnicomAI/LeMiCa

KV cache stores key and value states from previous tokens to avoid re-computation, yet it demands substantial storage space, especially for long sequences. Adaptive KV cache compression seeks to discern the saliency of tokens, preserving vital information while aggressively compressing those of less importance. However, previous methods of this approach exhibit significant performance degradation at high compression ratios due to inaccuracies in identifying salient tokens. In this paper, we present ZipCache, an accurate and efficient KV cache quantization method for LLMs. First, we construct a strong baseline for quantizing KV cache. Through the proposed channel-separable tokenwise quantization scheme, the memory overhead of quantization parameters are substantially reduced compared to fine-grained groupwise quantization. To enhance the compression ratio, we propose normalized attention score as an effective metric for identifying salient tokens by considering the lower triangle characteristics of the attention matrix. Moreover, we develop an efficient approximation method that decouples the saliency metric from full attention scores, enabling compatibility with fast attention implementations like FlashAttention. Extensive experiments demonstrate that ZipCache achieves superior compression ratios, fast generation speed and minimal performance losses compared with previous KV cache compression methods. For instance, when evaluating Mistral-7B model on GSM8k dataset, ZipCache is capable of compressing the KV cache by 4.98times, with only a 0.38% drop in accuracy. In terms of efficiency, ZipCache also showcases a 37.3% reduction in prefill-phase latency, a 56.9% reduction in decoding-phase latency, and a 19.8% reduction in GPU memory usage when evaluating LLaMA3-8B model with a input length of 4096.

As the input length of large language model (LLM) serving continues to grow, the KV cache has become a dominant bottleneck in AI infrastructure. It limits GPU memory capacity, serving concurrency, cache reuse, and distributed scalability. Multiple important problems, including position-independent KV cache, prefix KV cache compression, hot/cold KV cache separation, and distributed KV cache management, all depend on how the KV cache is represented and managed. However, existing serving systems largely rely on a monolithic KV cache abstraction, where the KV cache is treated as a homogeneous sequence of token-level memory blocks and managed with similar policies across attention heads and serving scenarios. We observe that KV cache utility is highly structured across KV heads: different heads exhibit different functional roles, attention distances, and runtime importance. Therefore, a full KV cache is not always necessary for every head, token range, or serving scenario. We present RedKnot, a head-aware KV cache management system for LLM serving. RedKnot breaks the conventional monolithic KV cache abstraction by decomposing the KV cache along KV heads, whose importance and effective attention ranges vary significantly across serving scenarios. This head-level decomposition turns the KV cache from a monolithic tensor abstraction into a structured memory object, enabling RedKnot to uniformly support position-independent KV reuse, prefix KV compression, hot/cold KV separation, and distributed KV placement while preserving output fidelity and improving resource efficiency, without requiring model retraining or fine-tuning. RedKnot establishes a new foundation for AI infrastructure by transforming the KV cache from a monolithic, passive runtime artifact into a dynamic, model-aware runtime substrate for scalable LLM serving.

ML-augmented algorithms utilize predictions to achieve performance beyond their worst-case bounds. Producing these predictions might be a costly operation -- this motivated Im et al. '22 to introduce the study of algorithms which use predictions parsimoniously. We design parsimonious algorithms for caching and MTS with action predictions, proposed by Antoniadis et al. '20, focusing on the parameters of consistency (performance with perfect predictions) and smoothness (dependence of their performance on the prediction error). Our algorithm for caching is 1-consistent, robust, and its smoothness deteriorates with the decreasing number of available predictions. We propose an algorithm for general MTS whose consistency and smoothness both scale linearly with the decreasing number of predictions. Without the restriction on the number of available predictions, both algorithms match the earlier guarantees achieved by Antoniadis et al. '20.

Key-value (KV) caching enables fast autoregressive decoding but at long contexts becomes a dominant bottleneck in High Bandwidth Memory (HBM) capacity and bandwidth. A common mitigation is to compress cached keys and values by projecting per-head matrices to a lower rank, storing only the projections in the HBM. However, existing post-training approaches typically fit these projections using SVD-style proxy objectives, which may poorly reflect end-to-end reconstruction after softmax, value mixing, and subsequent decoder-layer transformations. For these reasons, we introduce StiefAttention, a post-training KV-cache compression method that learns orthonormal projection bases by directly minimizing decoder-layer output reconstruction error. StiefAttention additionally constructs layer-wise error-rank profiles over candidate ranks, enabling sequential rank allocation under a user-specified KV cache budget. Notably, on Llama3-8B under the same conditions, StiefAttention outperforms EigenAttention by 4.2 points on C4 perplexity and 8.9 points on 0-shot MMLU accuracy at iso-compression, yielding lower relative error and higher cosine similarity with respect to the original decoder-layer outputs.

Extended reasoning in large language models (LLMs) creates severe KV cache memory bottlenecks. Leading KV cache compression methods estimate KV importance using attention scores from recent post-RoPE queries. However, queries rotate with position during RoPE, making representative queries very few, leading to poor top-key selection and unstable reasoning. To avoid this issue, we turn to the pre-RoPE space, where we observe that Q and K vectors are highly concentrated around fixed non-zero centers and remain stable across positions -- Q/K concentration. We show that this concentration causes queries to preferentially attend to keys at specific distances (e.g., nearest keys), with the centers determining which distances are preferred via a trigonometric series. Based on this, we propose TriAttention to estimate key importance by leveraging these centers. Via the trigonometric series, we use the distance preference characterized by these centers to score keys according to their positions, and also leverage Q/K norms as an additional signal for importance estimation. On AIME25 with 32K-token generation, TriAttention matches Full Attention reasoning accuracy while achieving 2.5x higher throughput or 10.7x KV memory reduction, whereas leading baselines achieve only about half the accuracy at the same efficiency. TriAttention enables OpenClaw deployment on a single consumer GPU, where long context would otherwise cause out-of-memory with Full Attention.

Mixture-of-Experts (MoE) models enable sparse expert activation, meaning that only a subset of the model's parameters is used during each inference. However, to translate this sparsity into practical performance, an expert caching mechanism is required. Previous works have proposed hardware-centric caching policies, but how these various caching policies interact with each other and different hardware specification remains poorly understood. To address this gap, we develop SpecMD, a standardized framework for benchmarking ad-hoc cache policies on various hardware configurations. Using SpecMD, we perform an exhaustive benchmarking of several MoE caching strategies, reproducing and extending prior approaches in controlled settings with realistic constraints. Our experiments reveal that MoE expert access is not consistent with temporal locality assumptions (e.g LRU, LFU). Motivated by this observation, we propose Least-Stale, a novel eviction policy that exploits MoE's predictable expert access patterns to reduce collision misses by up to 85times over LRU. With such gains, we achieve over 88% hit rates with up to 34.7% Time-to-first-token (TTFT) reduction on OLMoE at only 5% or 0.6GB of VRAM cache capacity.

Prompt-specialized multi-agent systems enable multiple agents to share a model while performing complementary roles to solve complex tasks. However, agent-specific prefixes change the KV cache generated for the same shared context, causing each agent to repeatedly prefill the growing context and construct a separate cache with high computation and memory overhead. Selective recomputation reduces this redundancy but still retains substantial model execution, while existing delta correction methods either support only recurring context relations or maintain memory-intensive online correction states for dynamically changing context. For first seen shared context, these methods also construct a reference cache outside the agent workflow, and an approximate correction at the first agent affects the outputs passed to subsequent agents. We present KVCMAS, an online KV cache correction framework that represents cross-agent cache deviations using compact low-rank states and seamlessly chains corrections along the agent workflow without an additional reference prefill. This design supports dynamically changing shared context while preserving an exact first-agent cache. Across multiple language and vision-language workloads, KVCMAS matches or improves the accuracy of prior KV cache sharing methods while achieving the lowest TTFT under highly concurrent serving. Under controlled serving traces, it provides a 2.0x TTFT speedup over inference without KV cache sharing and reduces peak GPU memory by up to 3.7x relative to a prior KV cache correction method. These results establish KVCMAS as an accurate and scalable KV cache sharing approach for prompt-specialized multi-agent serving.

Batch inference for agentic workloads stresses the GPU key-value (KV) cache in a sustained and cumulative manner, often causing severe throughput degradation well before memory capacity is exhausted. We identify this phenomenon as middle-phase thrashing, a previously under-characterized pathology in which cache efficiency collapses as long-lived agents accumulate state over time. We argue that mitigating this pathology requires moving beyond reactive, request-level cache management to proactive, agent-level admission control. Drawing inspiration from congestion control in distributed systems, we view the KV cache as a shared resource whose efficient utilization depends on feedback-driven regulation. Based on this insight, we present CONCUR, a lightweight control layer that regulates agent admission to bound aggregate cache pressure while preserving execution continuity. CONCUR adapts a cache-aware control algorithm to dynamically adjust the number of active agents using runtime cache signals. Across large models and real-world agent workloads, CONCUR prevents middle-phase thrashing and improves batch inference throughput by up to 4.09x on Qwen3-32B and 1.9x on DeepSeek-V3, while remaining compatible with existing LLM serving systems.

Many computational factors limit broader deployment of large language models. In this paper, we focus on a memory bottleneck imposed by the key-value (KV) cache, a computational shortcut that requires storing previous KV pairs during decoding. While existing KV cache methods approach this problem by pruning or evicting large swaths of relatively less important KV pairs to dramatically reduce the memory footprint of the cache, they can have limited success in tasks that require recollecting a majority of previous tokens. To alleviate this issue, we propose LESS, a simple integration of a (nearly free) constant sized cache with eviction-based cache methods, such that all tokens can be queried at later decoding steps. Its ability to retain information throughout time shows merit on a variety of tasks where we demonstrate LESS can help reduce the performance gap from caching everything, sometimes even matching it, all while being efficient.

Modern diffusion models generate high-quality images and videos, but their iterative denoising process makes inference expensive. Feature caching accelerates sampling by reusing or predicting intermediate activations across neighboring denoising steps, exploiting the redundancy of computations along the reverse trajectory. In this work, we focus on the caching schedule: selecting which denoising steps should be fully recomputed. Existing schedules are either fixed (e.g. uniform) or chosen adaptively from per-step error heuristics; in both cases, the actual compute cost is a side-effect of hand-tuned thresholds rather than a quantity the user can specify. We propose ReCache, which inverts this: given a target budget k, it learns the recomputation schedule that maximizes generation quality, turning compute into a directly controllable input. ReCache trains via policy gradients, sidestepping backpropagation through full diffusion inference, and uses no labelled data. Generations from uncached inference serve as matching targets, paired with a reward for generation quality. ReCache is compatible with any caching mechanism, including feature reuse and feature forecasting; for each mechanism, a single trained policy adapts across computational budgets at inference time. ReCache consistently outperforms scheduling baselines: under a times5.04 FLOPs reduction on FLUX, it reduces LPIPS by 31% (from 0.456 to 0.316) compared to DiCache; on Wan 2.1 at a sim times2.6 speedup, it drops LPIPS by 65% (from 0.480 to 0.169) and boosts the VBench score by 7% (5.6 points, from 70.4 to 76.0) over uniform HiCache. Code is available at https://github.com/thecrazymage/ReCache.

Efficient use of GPU memory is essential for high throughput LLM inference. Prior systems reserved memory for the KV-cache ahead-of-time, resulting in wasted capacity due to internal fragmentation. Inspired by OS-based virtual memory systems, vLLM proposed PagedAttention to enable dynamic memory allocation for KV-cache. This approach eliminates fragmentation, enabling high-throughput LLM serving with larger batch sizes. However, to be able to allocate physical memory dynamically, PagedAttention changes the layout of KV-cache from contiguous virtual memory to non-contiguous virtual memory. This change requires attention kernels to be rewritten to support paging, and serving framework to implement a memory manager. Thus, the PagedAttention model leads to software complexity, portability issues, redundancy and inefficiency. In this paper, we propose vAttention for dynamic KV-cache memory management. In contrast to PagedAttention, vAttention retains KV-cache in contiguous virtual memory and leverages low-level system support for demand paging, that already exists, to enable on-demand physical memory allocation. Thus, vAttention unburdens the attention kernel developer from having to explicitly support paging and avoids re-implementation of memory management in the serving framework. We show that vAttention enables seamless dynamic memory management for unchanged implementations of various attention kernels. vAttention also generates tokens up to 1.97x faster than vLLM, while processing input prompts up to 3.92x and 1.45x faster than the PagedAttention variants of FlashAttention and FlashInfer.

Leveraging the Transformer architecture and the diffusion process, video DiT models have emerged as a dominant approach for high-quality video generation. However, their multi-step iterative denoising process incurs high computational cost and inference latency. Caching, a widely adopted optimization method in DiT models, leverages the redundancy in the diffusion process to skip computations in different granularities (e.g., step, cfg, block). Nevertheless, existing caching methods are limited to single-granularity strategies, struggling to balance generation quality and inference speed in a flexible manner. In this work, we propose MixCache, a training-free caching-based framework for efficient video DiT inference. It first distinguishes the interference and boundary between different caching strategies, and then introduces a context-aware cache triggering strategy to determine when caching should be enabled, along with an adaptive hybrid cache decision strategy for dynamically selecting the optimal caching granularity. Extensive experiments on diverse models demonstrate that, MixCache can significantly accelerate video generation (e.g., 1.94times speedup on Wan 14B, 1.97times speedup on HunyuanVideo) while delivering both superior generation quality and inference efficiency compared to baseline methods.

Prefill-decode (PD) disaggregation has become the standard architecture for large-scale LLM serving, but in practice its deployment boundary is still determined by KVCache transfer. In conventional dense-attention models, prefill generates huge KVCache traffics that keep prefill and decode tightly coupled within a single high-bandwidth network domain, limiting heterogeneous deployment and resource elasticity. Recent hybrid-attention architectures substantially reduce KVCache size, making cross-cluster KVCache transport increasingly plausible. However, smaller KVCache alone does not make heterogeneous cross-datacenter PD serving practical: real workloads remain bursty, request lengths are highly skewed, prefix caches are unevenly distributed, and inter-cluster bandwidth fluctuates. A naive design that fully externalizes prefill can therefore still suffer from congestion, unstable queueing, and poor utilization. We present Prefill-as-a-Service (PrfaaS), a cross-datacenter serving architecture that selectively offloads long-context prefill to standalone, compute-dense prefill clusters and transfers the resulting KVCache over commodity Ethernet to local PD clusters for decode. Rather than treating reduced KVCache as sufficient, PrfaaS combines model-side KV efficiency with system-side selective offloading, bandwidth-aware scheduling, and cache-aware request placement. This design removes the requirement that heterogeneous accelerators share the same low-latency RDMA fabric, enabling independent scaling of prefill and decode capacity across loosely coupled clusters. In a case study using an internal 1T-parameter hybrid model, a PrfaaS-augmented heterogeneous deployment achieves 54% higher serving throughput and 64% lower P90 TTFT than a homogeneous PD baseline, with approximately 15% throughput gain at equal cost, while consuming only modest cross-datacenter bandwidth.

Diffusion Transformers (DiTs) power high-fidelity video world models but remain computationally expensive due to sequential denoising and costly spatio-temporal attention. Training-free feature caching accelerates inference by reusing intermediate activations across denoising steps; however, existing methods largely rely on a Zero-Order Hold assumption i.e., reusing cached features as static snapshots when global drift is small. This often leads to ghosting artifacts, blur, and motion inconsistencies in dynamic scenes. We propose WorldCache, a Perception-Constrained Dynamical Caching framework that improves both when and how to reuse features. WorldCache introduces motion-adaptive thresholds, saliency-weighted drift estimation, optimal approximation via blending and warping, and phase-aware threshold scheduling across diffusion steps. Our cohesive approach enables adaptive, motion-consistent feature reuse without retraining. On Cosmos-Predict2.5-2B evaluated on PAI-Bench, WorldCache achieves 2.3times inference speedup while preserving 99.4\% of baseline quality, substantially outperforming prior training-free caching approaches. Our code can be accessed on https://umair1221.github.io/World-Cache/{World-Cache}.

Request scheduling is a key challenge in large-scale clusters serving agentic large language model (LLM) workloads. An effective scheduler must preserve key-value cache (KVC) reuse across long, shared prefixes, meet token-level latency service-level objectives (SLOs), and minimize GPU resource footprint. Existing schedulers struggle to reconcile these requirements: request consolidation can sacrifice cache locality and increase prefill/decode interference, compromising both SLO attainment and resource efficiency. We present PackServe, a scheduler designed to reduce resource costs while meeting latency SLOs for agentic LLM serving. PackServe uses compact white-box models to predict latency under prefill/decode interference. Guided by these predictions, it packs requests onto fewer serving instances while preserving KVC reuse and SLO constraints, trading available latency headroom for improved per-instance throughput. Evaluation on 64 NVIDIA H20 GPUs shows that PackServe uses up to 16.8% and 24.6% fewer GPU-hours than state-of-the-art schedulers under 30-ms and 50-ms TPOT targets, respectively, while meeting the target TPOT objectives. PackServe has also been deployed in our production cluster comprising over 1000 GPUs, where it reduces the resource footprint by 34.7% compared with the original production scheduler.

Large language models (LLMs) excel at processing long sequences, boosting demand for key-value (KV) caching. While recent efforts to evict KV cache have alleviated the inference burden, they often fail to allocate resources rationally across layers with different attention patterns. In this paper, we introduce Cascading and Adaptive KV cache Eviction (CAKE), a novel approach that frames KV cache eviction as a "cake-slicing problem." CAKE assesses layer-specific preferences by considering attention dynamics in both spatial and temporal dimensions, allocates rational cache size for layers accordingly, and manages memory constraints in a cascading manner. This approach enables a global view of cache allocation, adaptively distributing resources across diverse attention mechanisms while maintaining memory budgets. CAKE also employs a new eviction indicator that considers the shifting importance of tokens over time, addressing limitations in existing methods that overlook temporal dynamics. Comprehensive experiments on LongBench and NeedleBench show that CAKE maintains model performance with only 3.2% of the KV cache and consistently outperforms current baselines across various models and memory constraints, particularly in low-memory settings. Additionally, CAKE achieves over 10x speedup in decoding latency compared to full cache when processing contexts of 128K tokens with FlashAttention-2. Our code is available at https://github.com/antgroup/cakekv.

Agentic LLM applications interleave LLM generation requests with tool calls. These tool calls break the continuity of the workflow by creating pauses between LLM requests, bringing many challenges for the serving system, especially under multi-turn scenarios. Each pause potentially causes KV cache eviction and extra waiting time before entering the continuous batch for the following LLM request. Since these pauses happen for each call, this problem becomes increasingly severe as turn number grow for agentic programs. Previous works either fail to incorporate information from the tool call, evicting KV cache that leads to repetitive prefill or loading, or ignore the continuity of a multi-turn program, creating waiting time between turns that increases per-request latency. We present Continuum, a serving system to optimize job completion time for multi-turn agent workloads by combining tool-aware KV cache timeout with program-level scheduling. By predicting tool call durations in agentic workflows, Continuum selectively pins the KV cache in GPU memory with a time-to-live value based on total turn number. When combined with program-level first-come-first-serve, Continuum prevents scheduling bubbles, preserves multi-turn continuity, and optimizes for throughput for complex agentic workflows. By modeling the variability of tool call and agent program continuity, Continuum outperforms state-of-the-art baselines. Our evaluation on real-world agentic workloads (SWE-Bench and BFCL) with Llama-3.1 8B/70B models shows that Continuum significantly improves the average job completion times, and remains performant across different hardware setups and DRAM offloading schemes. Preview code is available at: https://github.com/Hanchenli/vllm-continuum

Coding agents are a fast-growing LLM application, executing as long-running closed-loop sessions in which LLM generations alternate with external tool calls. Yet, unlike chat workloads, their serving behavior has not been studied extensively. We address this gap by collecting a dataset of real-world coding assistant traces. Our analysis shows that coding agent sessions repeatedly reuse large prefixes and create sustained KVCache pressure that conventional LLM serving policies handle poorly. Based on our analysis, we present CacheWise, a KVCache management layer that improves KVCache reuse for coding agent workloads. CacheWise combines prefix-aware scheduling with reuse-aware eviction guided by lightweight predictions from tool call metadata. Implemented in vLLM and evaluated on the collected traces, CacheWise reduces KVCache evictions by up to 2-2.6x and improves total agent session completion time by up to 3.5x.

Top-k sparse attention makes long-context LLM decoding cheap to compute: each step reads only a few thousand selected KV entries rather than the full context. Serving systems, however, typically keep the entire KV cache in GPU HBM so that every position stays selectable, so a request's memory bill still grows with its full context length--decoding hits a capacity wall long before it runs out of compute, and a context whose KV cache exceeds HBM cannot be served at all. We present HiSparse, an exact, indexer-agnostic hierarchical KV cache for sparse-attention serving. HiSparse keeps each request's full KV history in host memory and bounds its decode footprint with a small, fixed-size GPU cache; a fused CUDA kernel resolves each layer's selections--hit detection, LRU replacement, and host-to-device fetches--inside the decode CUDA graph; and, for models that share selections across layers, exact layer-wise prefetching hides roughly half of the remaining miss overhead. Because only KV placement changes, model outputs are unchanged. HiSparse is merged into upstream SGLang and evaluated across three sparse-attention families (DSA, NSA, and Quest) on H200, B200, and GH200 platforms: it improves peak generation throughput by up to 4.7x on long-context workloads while preserving comparable per-token latency and reducing time-to-first-token at high load--and a no-IO oracle shows the resolution mechanism itself adds no measurable per-token cost, leaving host-device IO as the only price of bounded residency.

Long-horizon LLM agents act on an append-only interaction history that is re-sent to the model at every step, so the context and its cost grow with steps until the sessions exceed the context window. Existing methods manage the context through context requirement prediction, relying on additional model calls, heuristic rules, or trained policies. However, these predictive approaches introduce runtime overhead, invalidate prefix caches, and permanently discard content with no guarantee of recovery. To overcome these limitations, we introduce ReFold: a training-free rendering layer that preserves the underlying interaction history while compressing only the model's rendered context. It removes two kinds of inter-turn redundancy without an auxiliary predictor: content an earlier turn already displayed, replaced by a stub, and turns the agent itself reports finished, folded into a one-line note. Both operators use chunked rendering, rewriting the cached prefix once every few steps rather than at every step. Every removal is strictly reversible, a wrong removal costs one restore from the history rather than permanent content loss. Because it operates at the rendering layer, ReFold is plug-and-play across standard ReAct-style harnesses. Evaluations across five long-horizon benchmarks and two frontier LLMs demonstrate that ReFold reduces token consumption by up to 2.5x and halves the KV-cache memory per session without degrading task success rates. Under capped context budgets, it avoids up to 92% of forced compactions. Under concurrent serving workloads, it reduces request queuing delays by up to 100%, accelerating inference by up to 1.7x, while cutting inference costs by up to 3.4x.

Address translation is a performance bottleneck in data-intensive workloads due to large datasets and irregular access patterns that lead to frequent high-latency page table walks (PTWs). PTWs can be reduced by using (i) large hardware TLBs or (ii) large software-managed TLBs. Unfortunately, both solutions have significant drawbacks: increased access latency, power and area (for hardware TLBs), and costly memory accesses, the need for large contiguous memory blocks, and complex OS modifications (for software-managed TLBs). We present Victima, a new software-transparent mechanism that drastically increases the translation reach of the processor by leveraging the underutilized resources of the cache hierarchy. The key idea of Victima is to repurpose L2 cache blocks to store clusters of TLB entries, thereby providing an additional low-latency and high-capacity component that backs up the last-level TLB and thus reduces PTWs. Victima has two main components. First, a PTW cost predictor (PTW-CP) identifies costly-to-translate addresses based on the frequency and cost of the PTWs they lead to. Second, a TLB-aware cache replacement policy prioritizes keeping TLB entries in the cache hierarchy by considering (i) the translation pressure (e.g., last-level TLB miss rate) and (ii) the reuse characteristics of the TLB entries. Our evaluation results show that in native (virtualized) execution environments Victima improves average end-to-end application performance by 7.4% (28.7%) over the baseline four-level radix-tree-based page table design and by 6.2% (20.1%) over a state-of-the-art software-managed TLB, across 11 diverse data-intensive workloads. Victima (i) is effective in both native and virtualized environments, (ii) is completely transparent to application and system software, and (iii) incurs very small area and power overheads on a modern high-end CPU.

Retrieval-Augmented Generation (RAG) is often used with Large Language Models (LLMs) to infuse domain knowledge or user-specific information. In RAG, given a user query, a retriever extracts chunks of relevant text from a knowledge base. These chunks are sent to an LLM as part of the input prompt. Typically, any given chunk is repeatedly retrieved across user questions. However, currently, for every question, attention-layers in LLMs fully compute the key values (KVs) repeatedly for the input chunks, as state-of-the-art methods cannot reuse KV-caches when chunks appear at arbitrary locations with arbitrary contexts. Naive reuse leads to output quality degradation. This leads to potentially redundant computations on expensive GPUs and increases latency. In this work, we propose Cache-Craft, a system for managing and reusing precomputed KVs corresponding to the text chunks (we call chunk-caches) in RAG-based systems. We present how to identify chunk-caches that are reusable, how to efficiently perform a small fraction of recomputation to fix the cache to maintain output quality, and how to efficiently store and evict chunk-caches in the hardware for maximizing reuse while masking any overheads. With real production workloads as well as synthetic datasets, we show that Cache-Craft reduces redundant computation by 51% over SOTA prefix-caching and 75% over full recomputation. Additionally, with continuous batching on a real production workload, we get a 1.6X speed up in throughput and a 2X reduction in end-to-end response latency over prefix-caching while maintaining quality, for both the LLaMA-3-8B and LLaMA-3-70B models.

Efficient KV cache management in LLMs is crucial for long-context tasks like RAG and summarization. Existing KV cache compression methods enforce a fixed pattern, neglecting task-specific characteristics and reducing the retention of essential information. However, we observe distinct activation patterns across layers in various tasks, highlighting the need for adaptive strategies tailored to each task's unique demands. Based on this insight, we propose DynamicKV, a method that dynamically optimizes token retention by adjusting the number of tokens retained at each layer to adapt to the specific task. DynamicKV establishes global and per-layer maximum KV cache budgets, temporarily retaining the maximum budget for the current layer, and periodically updating the KV cache sizes of all preceding layers during inference. Our method retains only 1.7% of the KV cache size while achieving ~85% of the Full KV cache performance on LongBench. Notably, even under extreme compression (0.9%), DynamicKV surpasses state-of-the-art (SOTA) methods by 11% in the Needle-in-a-Haystack test using Mistral-7B-Instruct-v0.2. The code will be released.

LLM agents today communicate via text, which incurs considerable latency and information loss due to the need to autoregressively decode the sharer model's state and encode at the receiver model. Recent work such as Cache-to-Cache (C2C; Fu et al., 2026) seeks to exchange KV caches by learning adapters that translate sharer KV matrices to the receiver model. However, the adapters are large and expensive to train, and translate individual tokens, which requires the target context to be identical. This is unsuitable for agent communication, where the LLMs have differing context. We introduce Latent Cache Flow (LCF). To address efficiency, we observe that keys and values can be jointly translated and compressed, reducing the adapter to about 4% of C2C's size. To address differing context, we design the adapter to transmit a summary of new information that the target model does not have. Our early experiments show that a pruned 13 MB LCF adapter can be more accurate than C2C at 956 MB in shared-context settings; for different contexts, LCF improves F1 by 7.5% and Exact Match by 23% while 8.5 times faster than text-based communication.

Recent advances in large language models (LLMs) have significantly boosted long-context processing. However, the increasing key-value (KV) cache size poses critical challenges to memory and execution efficiency. Most KV cache compression methods rely on heuristic token eviction using all attention heads in Grouped Query Attention (GQA)-based LLMs. This method ignores the different functionalities of attention heads, leading to the eviction of critical tokens and thus degrades the performance of LLMs. To address the issue above, instead of using all the attention heads in GQA-based LLMs to determine important tokens as in the previous work, we first identify the attention heads in each layer that are not only capable of retrieving the initial and final tokens of a prompt, but also capable of retrieving important tokens within the text and attending to their surrounding semantic context. Afterwards, we exploit such heads to determine the important tokens and retain their corresponding KV cache pairs. Furthermore, we analyze the cache eviction error of each layer individually and introduce a layer-adaptive KV cache allocation strategy. Experimental results demonstrate the proposed CompressKV consistently outperforms state-of-the-art approaches under various memory budgets on LongBench and Needle-in-a-Haystack benchmarks. Our code is publicly available at: https://github.com/TUDa-HWAI/CompressKV.git.

Multi-turn LLM agents interleave model calls with external tool invocations, shifting serving from stateless request processing to stateful program execution. Serving these workloads requires scheduling, KV-cache management, and routing policies that use program-level context, including turn dependencies, tool-induced gaps, and reusable KV state. Evaluating such policies directly on real systems is costly, since each design point may require dedicated accelerator time across arrival rates, model scales, serving-instance counts, and memory hierarchies. Simulation offers a scalable alternative, but existing LLM serving simulators target stateless request-level workloads and therefore omit the core dynamics of agent serving: multi-turn program execution, cross-turn cache locality, and KV-cache residency during tool gaps. We present AGENTSERVESIM, a hardware-aware simulator for multi-turn LLM agent serving. AGENTSERVESIM evaluates serving policies at program granularity through composable modules: a Program Orchestrator preserves program identity and turn order, a Tool Simulator materializes tool-induced gaps, a Session-Aware Router maintains program-to-instance affinity for cache-aware dispatch, and a KV Residency Model tracks policy-defined KV placement across HBM, host DRAM/CXL, and eviction. Across real serving deployments and hardware configurations, AGENTSERVESIM reproduces real-system behavior within 6% error across key performance metrics while running entirely on commodity CPUs. These results show that AGENTSERVESIM enables controlled, repeatable exploration of agent-serving policies without requiring exhaustive deployment on costly accelerators.

LLM serving relies on prefix caching to improve inference performance. As growing contexts push key-value (KV) cache footprint far beyond GPU HBM and CPU DRAM capacity, KV cache is increasingly offloaded to NVMe SSDs. Unfortunately, restoring KV cache from SSDs suffers from poor I/O performance and incurs significant GPU stalls. This is primarily because the fragmented GPU memory layout results in a massive number of tiny random I/Os, rendering the low-parallelism CPU a severe bottleneck even with GPU Direct Storage (GDS), which still relies on CPU intervention to initiate each I/O and thus remains CPU-centric. This paper presents Tutti, an efficient SSD-backed KV caching solution that eliminates CPU intervention from the critical data and I/O control paths between HBM and SSDs. At the core of Tutti is a GPU-centric KV cache object store, in which the CPU is only responsible for asynchronously loading I/O kernels once per layer to the GPU. Tutti saturates NVMe SSD bandwidth and reduces GPU stalls to near zero through the following designs: (i) we provide a GPU-native object abstraction that enables bulk KV cache transfers and management; (ii) we re-architect the GPU storage stack by introducing GPU io_uring to support asynchronous GPU direct object I/O; and (iii) we propose slack-aware I/O scheduling to avoid GPU resource contention. We have implemented Tutti and integrated it to vLLM. Extensive evaluation shows that compared to the state-of-the-art GDS-enabled, SSD-backed LMCache, Tutti reduces TTFT by 78.3% under strict SLO constraints and improves the achievable request rate by 2x. The serving cost is reduced by 27%. Tutti achieves nearly the same inference performance as DRAM-backed LMCache, while providing almost infinite capacity.

The large size of the KV cache has become a major bottleneck for serving LLMs with increasing context lengths. In response, many KV cache compression methods, such as token dropping and quantization, have been proposed. However, almost all of these methods are inherently lossy-despite minimal accuracy degradation for short outputs, their outputs increasingly diverge from full-KV-cache outputs as more tokens are decoded, which leads to catastrophic failures in code generation and tool calling. We present VeriCache, the first inference framework that ensures the same output as full-KV-cache decoding but largely preserves the high decoding throughput of a range of KV cache compression algorithms. VeriCache uses the compressed KV cache to draft tokens, then verifies them against the full KV cache. While it may seem like just speculative decoding, VeriCache requires addressing a key system challenge to work-keeping the full KV cache out of GPU memory and minimizing the overhead of swapping it in for verification. The insight is two-fold: (1) compressed-KV decoding can be parallelized with full-KV swap, because one is HBM-bandwidth-bound and the other is PCIe/network-bound, and (2) the compressed KV cache often produces output similar to the full KV cache, allowing a long drafting horizon to amortize each full-KV swap. VeriCache applies to both long-context decoding and remote prefix caching, supports a broad family of token-dropping and quantization methods through a uniform compressor interface, and composes with traditional speculative decoding. Experimental results show that VeriCache achieves up to 4X higher throughput than full-KV inference while producing identical outputs.

Serving transformer language models with high throughput requires caching Key-Values (KVs) to avoid redundant computation during autoregressive generation. The memory footprint of KV caching is significant and heavily impacts serving costs. This work proposes to lessen these memory requirements. While recent work has largely addressed KV cache reduction via compression and eviction along the temporal axis, we argue that the depth dimension offers an orthogonal and robust avenue for optimization. Although prior research suggests that a full cache for every layer is redundant, implementing cross-layer cache sharing remains a practical challenge; existing methods typically suffer from reduced throughput or increased time-to-first-token. In this paper, we demonstrate that dropping a layer's cache offers efficient optimization without information loss. We propose a simple training approach: random cross-layer attention. During training, layers randomly choose to attend either to their own KV states or those of a preceding layer. This stochastic process adapts the model to be robust to various depth-wise cache sharing strategies, ensuring flexibility for unknown hardware constraints at deployment time. Our evaluations show that applying this scheme during pre-training or fine-tuning enables depth-wise cache sharing for various model families. Furthermore, for larger models in data-constrained settings, this approach is suggestive of a regularization-like effect, frequently preserving or improving performance while significantly reducing the cache's memory footprint.

Hardware prefetching is critical to fill the performance gap between CPU speeds and slower memory accesses. With multicore architectures becoming commonplace, traditional prefetchers are severely challenged. Independent core operation creates significant redundancy (up to 20% of prefetch requests are duplicates), causing unnecessary memory bus traffic and wasted bandwidth. Furthermore, cutting-edge prefetchers such as Pythia suffer from about a 10% performance loss when scaling from a single-core to a four-core system. To solve these problems, we propose CRL-Pythia, a coordinated reinforcement learning based prefetcher specifically designed for multicore systems. In this work, CRL-Pythia addresses these issues by enabling cross-core sharing of information and cooperative prefetching decisions, which greatly reduces redundant prefetch requests and improves learning convergence across cores. Our experiments demonstrate that CRL-Pythia outperforms single Pythia configurations in all cases, with approximately 12% IPC (instructions per cycle) improvement for bandwidth-constrained workloads, while imposing moderate hardware overhead. Our sensitivity analyses also verify its robustness and scalability, thereby making CRL-Pythia a practical and efficient solution to contemporary multicore systems.

Recent advances in large language models (LLMs) have extended context lengths, enabling assistants to sustain long histories for coherent, personalized responses. This ability, however, hinges on Key-Value (KV) caching, whose memory grows linearly with dialogue length and quickly dominates under strict resource constraints. An active line of research for reducing this overhead is KV cache compression, which seeks to limit cache size while preserving accuracy. Yet existing methods face two major limitations: (i) evicting entries after full-context prefill causes unbounded peak memory, and (ii) query-dependent eviction narrows the cache to a single query, leading to degraded accuracy in multi-turn conversations. We introduce EpiCache, a training-free KV cache management framework for long conversational question answering (LongConvQA) under fixed memory budgets. EpiCache bounds cache growth through block-wise prefill and preserves topic-relevant context via episodic KV compression, which clusters conversation history into coherent episodes and applies episode-specific KV cache eviction. We further design an adaptive layer-wise budget allocation strategy that measures each layer's sensitivity to eviction and distributes the memory budget across layers accordingly. Across three LongConvQA benchmarks, EpiCache improves accuracy by up to 40% over recent baselines, sustains near-full KV accuracy under 4-6x compression, and reduces latency and memory by up to 2.4x and 3.5x, thereby enabling efficient multi-turn interaction under strict resource constraints.

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

Key-value (KV) caching has emerged as a crucial optimization technique for accelerating inference in large language models (LLMs). By allowing the attention operation to scale linearly rather than quadratically with the total sequence length, KV caching significantly enhances generation throughput. However, due to large context lengths in the modern LLMs, the memory footprint of the KV is a huge bottleneck for model deployment directly impacting the model's batch size, hindering its ability to deliver high-throughput. Existing research addresses this challenge using several techniques, such as discarding low-attention tokens, quantization, and matrix approximation which typically lead to a negative impact on the model accuracy. In this paper, We propose KVCrush technology which can be combined with many KV compression technologies to improve the model accuracy at a much smaller memory. KVCrush provides an alternate representation scheme for key-value states, along with a low-overhead token pruning algorithm that accounts for the token distribution in the KV cache, which in turn allows for a a smaller footprint while maintaining the accuracy of the model. Based on our results, KVCrush reduces LongBench KV Cache size by 4x with less than 1% accuracy drop and achieves state-of-the-art average accuracy with minimal overhead, incurring less than 0.5% total inference latency. KVCrush not only outperforms the accuracy of state-of-the-art importance-based token retention schemes but is also compatible with typical practical LLM deployments using KV cache paging schemes such as vLLM and mixed precision quantization.

Key-value (KV) caching is a powerful technique for accelerating large language model inference and generation. Inference workloads are large and diverse, which makes them difficult to cache effectively. Existing cache management strategies adopt the least-recently-used policy for evicting cache blocks. However, LRU leads to multiple unrelated workloads flushing each other's caches. To address this, we integrate adaptive caching that dynamically allocates cache space between recently and frequently occurring KV blocks. Evaluations show that it improves the KV cache hit rate by up to 10.8% and reduces time to first token by up to 12.6% over naive vLLM on synthetic document question answering workloads, and 2.1% and 2.0% respectively on real-world conversation workloads. The method generalizes well to batch inference and demonstrates clear interpretability while effectively accommodating diverse workloads.

Key-Value (KV) cache plays a crucial role in accelerating inference in large language models (LLMs) by storing intermediate attention states and avoiding redundant computation during autoregressive generation. However, its memory footprint scales linearly with sequence length, often leading to severe memory bottlenecks on resource-constrained hardware. Prior work has explored offloading KV cache to the CPU while retaining only a subset on the GPU, but these approaches often rely on imprecise token selection and suffer performance degradation in long-generation tasks such as chain-of-thought reasoning. In this paper, we propose a novel KV cache management strategy, IceCache, which integrates semantic token clustering with PagedAttention. By organizing semantically related tokens into contiguous memory regions managed by a hierarchical, dynamically updatable data structure, our method enables more efficient token selection and better utilization of memory bandwidth during CPU-GPU transfers. Experimental results on LongBench show that, with a 256-token budget, IceCache maintains 99% of the original accuracy achieved by the full KV cache model. Moreover, compared to other offloading-based methods, IceCache attains competitive or even superior latency and accuracy while using only 25% of the KV cache token budget, demonstrating its effectiveness in long-sequence scenarios. The code is available on our project website at https://yuzhenmao.github.io/IceCache/.

Deploying long-context large language models (LLMs) is essential but poses significant computational and memory challenges. Caching all Key and Value (KV) states across all attention heads consumes substantial memory. Existing KV cache pruning methods either damage the long-context capabilities of LLMs or offer only limited efficiency improvements. In this paper, we identify that only a fraction of attention heads, a.k.a, Retrieval Heads, are critical for processing long contexts and require full attention across all tokens. In contrast, all other heads, which primarily focus on recent tokens and attention sinks--referred to as Streaming Heads--do not require full attention. Based on this insight, we introduce DuoAttention, a framework that only applies a full KV cache to retrieval heads while using a light-weight, constant-length KV cache for streaming heads, which reduces both LLM's decoding and pre-filling memory and latency without compromising its long-context abilities. DuoAttention uses a lightweight, optimization-based algorithm with synthetic data to identify retrieval heads accurately. Our method significantly reduces long-context inference memory by up to 2.55x for MHA and 1.67x for GQA models while speeding up decoding by up to 2.18x and 1.50x and accelerating pre-filling by up to 1.73x and 1.63x for MHA and GQA models, respectively, with minimal accuracy loss compared to full attention. Notably, combined with quantization, DuoAttention enables Llama-3-8B decoding with 3.3 million context length on a single A100 GPU. Code is provided in https://github.com/mit-han-lab/duo-attention.

Diffusion models are a strong backbone for visual generation, but their inherently sequential denoising process leads to slow inference. Previous methods accelerate sampling by caching and reusing intermediate outputs based on feature distances between adjacent timesteps. However, existing caching strategies typically rely on raw feature differences that entangle content and noise. This design overlooks spectral evolution, where low-frequency structure appears early and high-frequency detail is refined later. We introduce Spectral-Evolution-Aware Cache (SeaCache), a training-free cache schedule that bases reuse decisions on a spectrally aligned representation. Through theoretical and empirical analysis, we derive a Spectral-Evolution-Aware (SEA) filter that preserves content-relevant components while suppressing noise. Employing SEA-filtered input features to estimate redundancy leads to dynamic schedules that adapt to content while respecting the spectral priors underlying the diffusion model. Extensive experiments on diverse visual generative models and the baselines show that SeaCache achieves state-of-the-art latency-quality trade-offs.

Autoregressive video diffusion enables scalable long-video generation by producing chunks from a bounded recent context. While recency-based caching preserves local continuity, it evicts historical cues needed when subjects, objects, scenes, or attributes reappear. Existing memory mechanisms expose models to nonlocal history, but access alone does not ensure effective use. Our analysis reveals that video DiT layers exhibit distinct preferences for current, recent, and distant context, suggesting that long-range memory requires deciding both what to retrieve and where to use it. We introduce LayerRecall, a current-conditioned, layer-selective memory router that retrieves relevant historical K/V states and injects them only into backbone-specific memory-sensitive layers while preserving local attention elsewhere. To reduce reliance on scarce high-quality long-horizon videos and explicit memory-allocation labels, we further propose Cross-Horizon Prediction Matching (CHPM), which uses a privileged long-context reference to supervise the bounded-memory router in prediction space. Across 100 multi-shot evaluation prompts, LayerRecall achieves the best overall results on MemoBench and MovieBench while matching its backbone on VBench-Long, demonstrating stronger long-range recovery without sacrificing local continuity. Qualitative analyses further reveal memory-guided self-correction, whereby initially mismatched local attributes return to their historical appearance without resetting ongoing motion or scene structure. Additional analyses show cross-backbone portability and negligible inference overhead.

The linear growth of key-value (KV) cache memory and quadratic computational complexity pose significant bottlenecks for large language models (LLMs) in long-context processing. While existing KV cache optimization methods address these challenges through token pruning or feature merging, they often suffer from irreversible information loss or require costly parameter retraining. We propose ZeroMerge, a dynamic zero-shot compression framework that achieves efficient cache management through three key innovations: (1) Fine-grained memory allocation guided by multi-dimensional token importance metrics at head-level granularity, (2) A residual merging mechanism that preserves critical context through compensated attention scoring, and (3) Parameter-free adaptation compatible with diverse LLM architectures without retraining. Comprehensive evaluations across LLaMA-2 model demonstrate that ZeroMerge maintains full-cache performance at 5\% compression ratios while doubling inference throughput at 40K token lengths. The method effectively balances memory efficiency, generation quality, and deployment flexibility, advancing practical long-context LLM applications. The code is available at https://github.com/SusCom-Lab/ZeroMerge.

This paper proposes a general solution to enable point cloud recognition models to handle distribution shifts at test time. Unlike prior methods, which rely heavily on training data (often inaccessible during online inference) and are limited to recognizing a fixed set of point cloud classes predefined during training, we explore a more practical and challenging scenario: adapting the model solely based on online test data to recognize both previously seen classes and novel, unseen classes at test time. To this end, we develop Point-Cache, a hierarchical cache model that captures essential clues of online test samples, particularly focusing on the global structure of point clouds and their local-part details. Point-Cache, which serves as a rich 3D knowledge base, is dynamically managed to prioritize the inclusion of high-quality samples. Designed as a plug-and-play module, our method can be flexibly integrated into large multimodal 3D models to support open-vocabulary point cloud recognition. Notably, our solution operates with efficiency comparable to zero-shot inference, as it is entirely training-free. Point-Cache demonstrates substantial gains across 8 challenging benchmarks and 4 representative large 3D models, highlighting its effectiveness. Code is available at https://github.com/auniquesun/Point-Cache.

Long-context LLMs have enabled numerous downstream applications but also introduced significant challenges related to computational and memory efficiency. To address these challenges, optimizations for long-context inference have been developed, centered around the KV cache. However, existing benchmarks often evaluate in single-request, neglecting the full lifecycle of the KV cache in real-world use. This oversight is particularly critical, as KV cache reuse has become widely adopted in LLMs inference frameworks, such as vLLM and SGLang, as well as by LLM providers, including OpenAI, Microsoft, Google, and Anthropic. To address this gap, we introduce SCBench(SharedContextBench), a comprehensive benchmark for evaluating long-context methods from a KV cachecentric perspective: 1) KV cache generation, 2) KV cache compression, 3) KV cache retrieval, 4) KV cache loading. Specifically, SCBench uses test examples with shared context, ranging 12 tasks with two shared context modes, covering four categories of long-context capabilities: string retrieval, semantic retrieval, global information, and multi-task. With it, we provide an extensive KV cache-centric analysis of eight categories long-context solutions, including Gated Linear RNNs, Mamba-Attention hybrids, and efficient methods such as sparse attention, KV cache dropping, quantization, retrieval, loading, and prompt compression. The evaluation is conducted on 8 long-context LLMs. Our findings show that sub-O(n) memory methods suffer in multi-turn scenarios, while sparse encoding with O(n) memory and sub-O(n^2) pre-filling computation perform robustly. Dynamic sparsity yields more expressive KV caches than static patterns, and layer-level sparsity in hybrid architectures reduces memory usage with strong performance. Additionally, we identify attention distribution shift issues in long-generation scenarios. https://aka.ms/SCBench.

Chunked KV-cache compression reduces the memory and attention costs of long-context inference by compressing windows of consecutive tokens into fewer cache entries at a fixed stride. Such compression also introduces a new positional coordinate: a token's phase, or its position relative to compression-window boundaries. We uncover a systematic asymmetry in models using such compression: the same information can be easy to retrieve at one phase and difficult at another. We call this periodic variation in retrieval performance phase sensitivity. In large open-weight models with such compression, long-context retrieval accuracy can differ by up to 40 percentage points across phases, revealing periodic weak spots that average benchmark scores can conceal. To investigate this behavior, we pretrain a family of transformers from scratch across multiple KV-compression designs, reproducing phase sensitivity across the variants. Mechanistic analysis using causal interventions in these models reveals phase specialization: different attention components contribute asymmetrically to retrieving information at different source phases. We further analyze idealized retrieval models, showing how gradient flow dynamics may favor sharp phase specialization. Evaluating models with chunked KV-cache compression thus requires measuring across compression phases: high average accuracy can coexist with systematic positional failures.

Large Language Models (LLMs), such as OpenAI-o1 and DeepSeek-R1, have demonstrated strong reasoning capabilities. To further enhance LLM capabilities, recent agentic systems, such as Deep Research, incorporate web interactions into LLM reasoning to mitigate uncertainties and reduce potential errors. However, existing research predominantly focuses on reasoning performance, often neglecting the efficiency of agentic systems. In this work, we present a comprehensive empirical study that identifies efficiency bottlenecks in web-interactive agentic systems. We decompose end-to-end latency into two primary components: LLM API latency and web environment latency. We conduct a comprehensive empirical study across 15 models and 5 providers to demonstrate high variability in API-based agentic systems. We observe that web environment latency can contribute as much as 53.7% to the overall latency in a web-based agentic system. To improve latency, we propose SpecCache, a caching framework augmented with speculative execution that can reduce web environment overhead. Extensive evaluations on two standard benchmarks show that our approach improves the cache hit rate by up to 58x compared to a random caching strategy, while reducing web environment overhead by up to 3.2x, without degrading agentic system performance.

Hybrid language models like Jamba mix attention layers with State Space Models (SSMs), creating two memory cache types with opposite profiles: Key-Value (KV) caches grow linearly with sequence length, while SSM states stay fixed per layer. Current inference engines handle this poorly. Unified pools pad SSM states to attention page sizes, wasting up to 7.3x capacity. Static dual pools cannot adapt when prompt distributions shift between requests. We present Asymmetric Virtual Memory Paging (AVMP). The allocator separates the two cache types into physically distinct pools behind a unified virtual address space, and migrates capacity between pools when one runs out. Migration triggers only on allocation failure, keeping behavior deterministic. We evaluate AVMP across 270 synthetic cells plus 60 cells of ShareGPT trace replay on an RTX 3060 12GB. Out-of-Memory events drop 7.6% and request throughput improves 1.83x to 13.3x across synthetic workloads and 2.36x on ShareGPT. All gains hold under paired-bootstrap 95% confidence intervals. A phase-time breakdown reveals two distinct mechanisms: shorter OOM recovery on capacity-pressured workloads, and faster allocation calls on KV-heavy workloads. Implementation is pure Python; Triton integration is future work.

Long-context LLM decoding reads the key-value (KV) cache at every step. Loading it takes longer than computing attention over it, so throughput is bandwidth-bound. Hence, reducing the cache size can raise both decoding speed and serving capacity. The challenge is to reduce cache size while preserving the attention products, keeping reconstruction cheap, and using a fixed per-token bit count. At two bits per element, the most competitive methods rely on orthogonal transforms. However, existing techniques are either data-oblivious or use the query statistics without deriving the transform from a distortion criterion. Moreover, they rely on transforms built on top of random or Hadamard rotations, which equalize variances across entries rather than compacting energy, and fixed-width scalar quantizers, which are suboptimal at low rates. In this paper, we formulate KV cache quantization as a transform coding problem in which distortion is the error in the attention products. We derive closed-form optimal transforms for keys and values from calibration statistics, under a high-resolution model. We show that the optimal key transform is not orthogonal and satisfies a generalized Parseval relation: the attention-aware distortion becomes mean-squared error (MSE) in the transform domain. Thus, we can use MSE-optimal vector quantizers applied directly to the transformed key coefficients. To meet the fixed-width layout requirement, we show that grouping coefficients into equal-volume partitions makes equal-size codebooks attain the variable-rate optimum under the same high-resolution model. At two bits per element, our method, termed NOVA-KV, recovers most of the long-context retrieval accuracy lost by scalar quantization methods at comparable throughput.

Large Language Models (LLMs) and other large foundation models have achieved noteworthy success, but their size exacerbates existing resource consumption and latency challenges. In particular, the large-scale deployment of these models is hindered by the significant resource requirements during inference. In this paper, we study two approaches for mitigating these challenges: employing a cache to store previous queries and learning a model multiplexer to choose from an ensemble of models for query processing. Theoretically, we provide an optimal algorithm for jointly optimizing both approaches to reduce the inference cost in both offline and online tabular settings. By combining a caching algorithm, namely Greedy Dual Size with Frequency (GDSF) or Least Expected Cost (LEC), with a model multiplexer, we achieve optimal rates in both offline and online settings. Empirically, simulations show that the combination of our caching and model multiplexing algorithms greatly improves over the baselines, with up to 50times improvement over the baseline when the ratio between the maximum cost and minimum cost is 100. Experiments on real datasets show a 4.3times improvement in FLOPs over the baseline when the ratio for FLOPs is 10, and a 1.8times improvement in latency when the ratio for average latency is 1.85.

LLM agents increasingly rely on retrieval buffers to store and reuse past experience, yet the cache management policies governing these buffers remain largely ad-hoc. We formalize this as an online semantic cache replacement problem with switching costs, where items are matched by embedding similarity and hit quality is continuous rather than binary. Through experiments on two datasets from MemoryBench-Full (LoCoMo, DialSim) with 8 replacement policies, we reveal a surprising finding: classic heuristics (LRU, LFU) consistently underperform the naive FIFO baseline on semantic workloads, due to the absence of temporal locality and frequency concentration. We propose SOLAR, a learning-augmented framework that derives modification timing from regret accumulation (achieving sim17\% modification rate) and content selection from Bayesian online learning over implicit retrieval feedback. We prove SOLAR achieves a constant competitive ratio leq 3, independent of cache size and horizon (vs.\ Ω(K) for FIFO), and eviction regret O(KTlog T), matching the Ω(KT) lower bound up to logarithmic factors. Experiments demonstrate 5--75\% relative improvement over FIFO at tight cache sizes, with a clearly characterized phase transition at the working set boundary. Synthetic experiments with 5000-item pools further reveal an inverted-U relationship between pool size and retrieval quality, justifying capacity constraints as a retrieval noise phenomenon rather than a storage limitation.

Recent advances in diffusion models have demonstrated remarkable capabilities in video generation. However, the computational intensity remains a significant challenge for practical applications. While feature caching has been proposed to reduce the computational burden of diffusion models, existing methods typically overlook the heterogeneous significance of individual blocks, resulting in suboptimal reuse and degraded output quality. To this end, we address this gap by introducing ProfilingDiT, a novel adaptive caching strategy that explicitly disentangles foreground and background-focused blocks. Through a systematic analysis of attention distributions in diffusion models, we reveal a key observation: 1) Most layers exhibit a consistent preference for either foreground or background regions. 2) Predicted noise shows low inter-step similarity initially, which stabilizes as denoising progresses. This finding inspires us to formulate a selective caching strategy that preserves full computation for dynamic foreground elements while efficiently caching static background features. Our approach substantially reduces computational overhead while preserving visual fidelity. Extensive experiments demonstrate that our framework achieves significant acceleration (e.g., 2.01 times speedup for Wan2.1) while maintaining visual fidelity across comprehensive quality metrics, establishing a viable method for efficient video generation.

Coding agents powered by large language models (LLMs) repeatedly alternate between model inference and tool calls, creating long-lived sessions with reusable key-value (KV) states and asynchronous request resumptions. Logical readiness, however, does not ensure efficient admission in a shared serving system. Through direct trace analysis and trace-driven replay, we identify two mismatches: reusable KV states reside across storage tiers and incur unequal computational costs for state preparation, while requests with heterogeneous context lengths can decode inefficiently together. Our central insight is that exploiting admission flexibility can improve serving performance while preserving request progress. We present Coda, a coding-agent serving system that realizes this insight through a readiness-informed admission layer incorporating two mechanisms. Tiered-Aging state admission exploits bounded flexibility in admission order to improve admission efficiency and preserve request progress. Compatibility-Aware execution admission exploits flexibility in attention grouping within each model iteration to reduce mixed-context interference and improve shared decoding efficiency. For multi-worker configurations, Coda introduces a separate routing layer that considers KV-state residency, worker load, and request-to-worker context-length compatibility to guide efficient request placement. We evaluate Coda across different models and workloads against state-of-the-art coding-agent serving systems and vLLM. Across the single-worker and multi-worker experiments, Coda improves output-token and SLO-compliant throughput by 20.3% and 70.5% on average, with peak gains of 29.3% and 140.2%.

LLM-based workflows compose specialized agents to execute complex tasks, and these agents usually share substantial context, allowing KV-Cache reuse to save computation. Existing approaches either manage KV-Cache at agent level and fail to exploit the reuse opportunities within workflows, or manage cache at the workflow level but assume that each workflow calls a static sequence of agents. However, practical workflows are typically dynamic, where the sequence of invoked agents and thus induced cache reuse opportunities depend on the context of each task. To serve such dynamic workflows efficiently, we build a system dubbed PBKV (Prediction-Based KV-Cache Management). For each workflow, PBKV predicts the agent invocations in several future steps by fusing the guidance from historical workflows and context of the target workflow. Based on the predictions, PBKV estimates the reuse potential of cache entries and keeps the high-potential entries in GPU memory. To be robust to prediction errors, PBKV utilizes the predictions conservatively during both cache eviction and prefetching. Experiments on three workflow benchmarks show that PBKV achieves up to 1.85times speedup over LRU on dynamic workflows, and up to 1.26times speedup over the SOTA baseline KVFlow on the static workflow.

Embodied AI agents increasingly rely on large language models (LLMs) for planning, yet per-step LLM calls impose severe latency and cost. In this paper, we show that embodied tasks exhibit strong plan locality, where the next plan is largely predictable from the current one. Building on this, we introduce AgenticCache, a planning framework that reuses cached plans to avoid per-step LLM calls. In AgenticCache, each agent queries a runtime cache of frequent plan transitions, while a background Cache Updater asynchronously calls the LLM to validate and refine cached entries. Across four multi-agent embodied benchmarks, AgenticCache improves task success rate by 22% on average across 12 configurations (4 benchmarks x 3 models), reduces simulation latency by 65%, and lowers token usage by 50%. Cache-based plan reuse thus offers a practical path to low-latency, low-cost embodied agents. Code is available at https://github.com/hojoonleokim/MLSys26_AgenticCache.

Streaming video understanding requires processing unbounded video streams with limited memory and computation, posing two key challenges. First, continuously constructing new and evicting old key-value(KV) caches is required for unbounded streams. Secondly, due to the high cost of collecting and training on unbounded streams, models must learn from short sequences while generalizing to long streams. Existing streaming VideoVLLMs fail to scale to unbounded video streams or focus on cache reuse strategies, leaving the impact of cache construction underexplored. In this paper, we propose Decoupled Streaming Cache(DSCache), a training-free cache construction mechanism that adapts pretrained offline models to streaming settings. DSCache maintains a cumulative past KV cache while constructing a separate instant cache on-demand, decoupled from past caches to preserve the informativeness of recent inputs. To enable position extrapolation beyond the training length, DSCache further incorporates a position-agnostic encoding strategy, ensuring KV caches to support unseen positions and preventing position overflow. Experiments on Streaming Video QA benchmarks demonstrate DSCache's state-of-the-art performance, with an average 2.5% accuracy gains over prior methods.

Semantic caching has emerged as a pivotal technique for scaling LLM applications, widely adopted by major providers including AWS and Microsoft. By utilizing semantic embedding vectors as cache keys, this mechanism effectively minimizes latency and redundant computation for semantically similar queries. In this work, we conceptualize semantic cache keys as a form of fuzzy hashes. We demonstrate that the locality required to maximize cache hit rates fundamentally conflicts with the cryptographic avalanche effect necessary for collision resistance. Our conceptual analysis formalizes this inherent trade-off between performance (locality) and security (collision resilience), revealing that semantic caching is naturally vulnerable to key collision attacks. While prior research has focused on side-channel and privacy risks, we present the first systematic study of integrity risks arising from cache collisions. We introduce CacheAttack, an automated framework for launching black-box collision attacks. We evaluate CacheAttack in security-critical tasks and agentic workflows. It achieves a hit rate of 86\% in LLM response hijacking and can induce malicious behaviors in LLM agent, while preserving strong transferability across different embedding models. A case study on a financial agent further illustrates the real-world impact of these vulnerabilities. Finally, we discuss mitigation strategies.

Multi-LoRA agent systems enable efficient role specialization by sharing a common backbone model. However, each agent repeatedly processes the growing shared trajectory and constructs its own KV cache, introducing substantial memory and computation redundancy in long-horizon tasks. Existing KV cache sharing methods reduce this repeated prefill, but they either require additional training or architectural constraints or retain substantial model computation. Moreover, direct cache reuse causes the current agent to rely on cache states generated by the previous agent's adapter, weakening the role-specific behavior encoded by its own LoRA. We present PReCache, a training-free KV cache sharing framework with two designs, namely PreLRShared and ReBaseShared, that share the base cache computed using the pretrained weights and precompute a compact agent-specific low-rank (LR) cache. To remove repeated prefill, PreLRShared precomputes each agent's LR cache when the shared context is first processed, allowing the current agent to use its own LR cache without reprocessing context processed by previous agents. To improve sharing accuracy, ReBaseShared reconstructs the shared base cache from adapter-free hidden states, reducing the remaining error caused by the previous agent's adapted representation. To minimize its reconstruction cost, we propose two inference schemes tailored to single-stream inference and concurrent serving, performing the same reconstruction after each agent's turn or alongside its execution, respectively. Across multiple models and agent benchmarks, PreLRShared achieves up to a 3.1x TTFT speedup and a 2.3x improvement in per-request throughput over inference without KV cache sharing. ReBaseShared best preserves accuracy overall among the evaluated cache-sharing methods, with an average drop of only 1.1 points relative to inference without cache sharing.

Autoregressive video diffusion models provide a natural formulation for streaming and variable-length video generation by conditioning newly generated frames on previously generated content. However, extending these models to minute-level generation remains challenging: the limited KV-cache budget prevents the model from retaining the full history, while repeatedly conditioning on self-generated frames induces a context distribution shift that accumulates over time, leading to visual artifacts, quality degradation, and temporal drift. In this paper, we propose TetherCache, a training-free and plug-and-play cache management strategy for drift-resistant long video generation. TetherCache organizes the cache into sink, memory, and recent regions, and introduces two complementary mechanisms. First, GRAB (Gated Recall with Attention-Diversity Balancing) selects long-range memory frames using a gated score that combines attention-based relevance with temporal diversity, preserving informative yet diverse historical context under a fixed cache budget. Second, TAME (Trusted Alignment via Memory Editing) lightly edits newly recalled memory tokens by aligning their statistics to a trusted context distribution, reducing the pollution caused by drifted historical features. Built on Self-Forcing, TetherCache consistently improves long-video generation quality on VBench-Long across 30s, 60s, and 240s settings. In particular, for 240s generation, it substantially improves overall and semantic scores while reducing quality drift from 7.84 to 1.33, demonstrating its effectiveness for stable long-horizon autoregressive video diffusion.

Prompt caching in large language models (LLMs) results in data-dependent timing variations: cached prompts are processed faster than non-cached prompts. These timing differences introduce the risk of side-channel timing attacks. For example, if the cache is shared across users, an attacker could identify cached prompts from fast API response times to learn information about other users' prompts. Because prompt caching may cause privacy leakage, transparency around the caching policies of API providers is important. To this end, we develop and conduct statistical audits to detect prompt caching in real-world LLM API providers. We detect global cache sharing across users in seven API providers, including OpenAI, resulting in potential privacy leakage about users' prompts. Timing variations due to prompt caching can also result in leakage of information about model architecture. Namely, we find evidence that OpenAI's embedding model is a decoder-only Transformer, which was previously not publicly known.

Triangle centrality is introduced for finding important vertices in a graph based on the concentration of triangles surrounding each vertex. It has the distinct feature of allowing a vertex to be central if it is in many triangles or none at all. We show experimentally that triangle centrality is broadly applicable to many different types of networks. Our empirical results demonstrate that 30% of the time triangle centrality identified central vertices that differed with those found by five well-known centrality measures, which suggests novelty without being overly specialized. It is also asymptotically faster to compute on sparse graphs than all but the most trivial of these other measures. We introduce optimal algorithms that compute triangle centrality in O(mbarδ) time and O(m+n) space, where barδle O(m) is the average degeneracy introduced by Burkhardt, Faber, and Harris (2020). In practical applications, barδ is much smaller than m so triangle centrality can be computed in nearly linear time. On a Concurrent Read Exclusive Write (CREW) Parallel Random Access Machine (PRAM), we give a near work-optimal parallel algorithm that takes O(log n) time using O(mm) CREW PRAM processors. In MapReduce, we show it takes four rounds using O(mm) communication bits and is therefore optimal. We also derive a linear algebraic formulation of triangle centrality which can be computed in O(mbarδ) time on sparse graphs.

Diffusion language models (DLMs) iteratively refine a sequence, allowing earlier predictions to be revised as context evolves. This rollback capability distinguishes them from irreversible autoregressive generation, but makes inference costly. Every denoising update alters the global context, forcing both prompt and response states to be recomputed even though only response tokens are revisable. Key-value (KV) caching could reduce this cost, yet conventional caching assumes immutable historical states and is therefore difficult to reconcile with rollback. In this paper, we introduce Adaptive Reuse of Cached Hidden States for Efficient Rollback (Archer), a training-free KV caching method for rollback-capable DLMs. Archer asymmetrically keeps the mutable response synchronized with the current hypothesis while reusing prompt K/V within a bounded state neighborhood. Although prompt representations also change under bidirectional attention, their token identities remain fixed; bounded reuse therefore amortizes repeated prompt computation without caching mutable response states. It also delays feedback from tentative tokens, reducing premature reinforcement of transient high-confidence errors and giving rollback more opportunity to correct them. Our analysis characterizes prompt reuse as a reversibility-aligned cache boundary, bounds its state-dependent approximation error, and gives a decoder-margin condition for preserving full-refresh decisions. Existing DLM acceleration often trades quality for speed. Archer shifts this frontier, attaining the best mean performance of 33.63% together with a 2.57x mean speedup on the main suite. Across evaluated settings, it improves Pass@1 by up to 3.05 points and reaches up to 2.95x speedup. Controlled analyses connect the quality gain to delayed prompt feedback and validate state-aware refresh. Our code is available at https://github.com/Hxnng/Archer.

This paper presents VLCache, a cache reuse framework that exploits both Key-Value (KV) cache and encoder cache from prior multimodal inputs to eliminate costly recomputation when the same multimodal inputs recur. Unlike previous heuristic approaches, we formally identify the cumulative reuse error effect and demonstrate how to minimize the non-prefix cache reuse error effectively. We further analyze the varying importance of model layers and propose a dynamic, layer-aware recomputation strategy to balance accuracy and efficiency. Experimental results show that VLCache achieves an accuracy on par with full recomputation, while requiring only 2-5% of the tokens to compute, yielding 1.2x-16x TTFT speedups. The proposed VLCache pipeline has been integrated into SGLang, enabling significantly faster inference in practical deployments.

Data movement between the CPU and main memory is a first-order obstacle against improving performance, scalability, and energy efficiency in modern systems. Computer systems employ a range of techniques to reduce overheads tied to data movement, spanning from traditional mechanisms (e.g., deep multi-level cache hierarchies, aggressive hardware prefetchers) to emerging techniques such as Near-Data Processing (NDP), where some computation is moved close to memory. Our goal is to methodically identify potential sources of data movement over a broad set of applications and to comprehensively compare traditional compute-centric data movement mitigation techniques to more memory-centric techniques, thereby developing a rigorous understanding of the best techniques to mitigate each source of data movement. With this goal in mind, we perform the first large-scale characterization of a wide variety of applications, across a wide range of application domains, to identify fundamental program properties that lead to data movement to/from main memory. We develop the first systematic methodology to classify applications based on the sources contributing to data movement bottlenecks. From our large-scale characterization of 77K functions across 345 applications, we select 144 functions to form the first open-source benchmark suite (DAMOV) for main memory data movement studies. We select a diverse range of functions that (1) represent different types of data movement bottlenecks, and (2) come from a wide range of application domains. Using NDP as a case study, we identify new insights about the different data movement bottlenecks and use these insights to determine the most suitable data movement mitigation mechanism for a particular application. We open-source DAMOV and the complete source code for our new characterization methodology at https://github.com/CMU-SAFARI/DAMOV.

Conventional LLMs keep the full KV cache loaded during decoding, causing a severe GPU memory bottleneck for ultra-long context serving. In this report, we propose Lookahead Sparse Attention (LSA), a novel inference paradigm powered by a Neural Memory Indexer built upon the DeepSeek-V4 architecture. Rather than passively attending to all historical tokens, LSA proactively predicts future context demands and preserves only the query-critical KV chunks in the GPU memory. Crucially, we instantiate this architecture via a backbone-free decoupled training strategy. By formulating the indexer as a standard dual-encoder architecture, we train it independently using standard retrieval training frameworks without ever loading the massive backbone model into GPU memory. We demonstrate that this "less is more" paradigm significantly maximizes serving efficiency while acting as an effective attention denoiser in tasks that rely on long-term global memory. Across primary long-context evaluation suites (e.g., LongBench-v2, LongMemEval, and RULER), FM-DS-V4 compresses the average physical KV cache footprint down to merely 13.5% of the full-context baseline, while consistently preserving or slightly elevating downstream accuracy (+0.6% absolute margin on average). Crucially, at extreme 500K scales, FlashMemory suppresses the physical KV cache overhead by over 90% without destabilizing the backbone's core reasoning capacities.

Video generation is pivotal to digital media creation, and recent advances in autoregressive video generation have markedly enhanced the efficiency of real-time video synthesis. However, existing approaches generally rely on heuristic KV Cache policies, which ignore differences in token importance in long-term video generation. This leads to the loss of critical spatiotemporal information and the accumulation of redundant, invalid cache, thereby degrading video generation quality and efficiency. To address this limitation, we first observe that token contributions to video generation are highly time-heterogeneous and accordingly propose a novel Past- and Future-Informed KV Cache Policy (PaFu-KV). Specifically, PaFu-KV introduces a lightweight Salience Estimation Head distilled from a bidirectional teacher to estimate salience scores, allowing the KV cache to retain informative tokens while discarding less relevant ones. This policy yields a better quality-efficiency trade-off by shrinking KV cache capacity and reducing memory footprint at inference time. Extensive experiments on benchmarks demonstrate that our method preserves high-fidelity video generation quality while enables accelerated inference, thereby enabling more efficient long-horizon video generation. Our code will be released upon paper acceptance.

The KV cache is a dominant memory bottleneck for LLM inference. While 4-bit KV quantization preserves accuracy, 2-bit often degrades it, especially on long-context reasoning. We close this gap via an algorithm-system co-design for mixed-precision KV caching: Kitty. On the algorithm side, extensive experiments show that Dynamic Channel-wise Precision Boost -- which ranks Key-cache channels by sensitivity and keeps only a small fraction at higher precision -- maintains near-zero loss in accuracy drop while approaching 2-bit memory. The main challenge is handling dynamic 4-bit channel boosts while keeping the page layout coalesced and the dequantization uniform, with no scattered reads or hard-coded masks. Kitty addresses these issues by decompose each mixed-precision Key page into two tensors with unified 2-bit precision. Based on this, Kitty provides a page-centric KV layout, Triton-compatible page dequantization kernels, and a lightweight runtime pipeline that preserves coalescing and avoids divergence. Across seven tasks and two model families (Qwen3, LLaMA3), Kitty cuts KV memory by nearly 8x with negligible accuracy loss, enabling up to 8x larger batches and 2.1x-4.1x higher throughput under the same memory budget. We release the full implementation of Kitty at https://github.com/Summer-Summer/Kitty.

As large language models engage in extended reasoning tasks, they accumulate significant state -- architectural mappings, trade-off decisions, codebase conventions -- within the context window. This understanding is lost when sessions reach context limits and undergo lossy compaction. We propose Contextual Memory Virtualisation (CMV), a system that treats accumulated LLM understanding as version-controlled state. Borrowing from operating system virtual memory, CMV models session history as a Directed Acyclic Graph (DAG) with formally defined snapshot, branch, and trim primitives that enable context reuse across independent parallel sessions. We introduce a three-pass structurally lossless trimming algorithm that preserves every user message and assistant response verbatim while reducing token counts by a mean of 20% and up to 86% for sessions with significant overhead by stripping mechanical bloat such as raw tool outputs, base64 images, and metadata. A single-user case-study evaluation across 76 real-world coding sessions demonstrates that trimming remains economically viable under prompt caching, with the strongest gains in mixed tool-use sessions, which average 39% reduction and reach break-even within 10 turns. A reference implementation is available at https://github.com/CosmoNaught/claude-code-cmv.

Diffusion-based large language models (dLLMs) rely on bidirectional attention, which prevents lossless KV caching and requires a full forward pass at every denoising step. Existing approximate KV caching methods reduce this cost by selectively updating cached states, but their decision overhead scales with context length or model depth. We propose EntropyCache, a training-free KV caching method that uses the maximum entropy of newly decoded token distributions as a constant-cost signal for deciding when to recompute. Our design is grounded in two empirical observations: (1) decoded token entropy correlates with KV cache drift, providing a cheap proxy for cache staleness, and (2) feature volatility of decoded tokens persists for multiple steps after unmasking, motivating recomputation of the k most recently decoded tokens. The skip-or-recompute decision requires only O(V) computation per step, independent of context length and model scale. Experiments on LLaDA-8B-Instruct and Dream-7B-Instruct show that EntropyCache achieves 15.2times-26.4times speedup on standard benchmarks and 22.4times-24.1times on chain-of-thought benchmarks, with competitive accuracy and decision overhead accounting for only 0.5% of inference time. Code is available at https://github.com/mscheong01/EntropyCache.

Large language models (LLMs) have demonstrated exceptional capabilities in generating text, images, and video content. However, as context length grows, the computational cost of attention increases quadratically with the number of tokens, presenting significant efficiency challenges. This paper presents an analysis of various Key-Value (KV) cache compression strategies, offering a comprehensive taxonomy that categorizes these methods by their underlying principles and implementation techniques. Furthermore, we evaluate their impact on performance and inference latency, providing critical insights into their effectiveness. Our findings highlight the trade-offs involved in KV cache compression and its influence on handling long-context scenarios, paving the way for more efficient LLM implementations.

Large language model (LLM) based agentic workflows have become a popular paradigm for coordinating multiple specialized agents to solve complex tasks. To improve serving efficiency, existing LLM systems employ prefix caching to reuse key-value (KV) tensors corresponding to agents' fixed prompts, thereby avoiding redundant computation across repeated invocations. However, current systems typically evict KV caches using a Least Recently Used (LRU) policy, which fails to anticipate future agent usage and often discards KV caches shortly before their reuse. This leads to frequent cache misses and substantial recomputation or swapping overhead. We present KVFlow, a workflow-aware KV cache management framework tailored for agentic workloads. KVFlow abstracts the agent execution schedule as an Agent Step Graph and assigns each agent a steps-to-execution value that estimates its temporal proximity to future activation. These values guide a fine-grained eviction policy at the KV node level, allowing KVFlow to preserve entries likely to be reused and efficiently manage shared prefixes in tree-structured caches. Moreover, KVFlow introduces a fully overlapped KV prefetching mechanism, which proactively loads required tensors from CPU to GPU in background threads for agents scheduled in the next step, thereby avoiding cache miss stalls during generation. Compared to SGLang with hierarchical radix cache, KVFlow achieves up to 1.83times speedup for single workflows with large prompts, and up to 2.19times speedup for scenarios with many concurrent workflows.

Large language models (LLMs) with extended context windows have become increasingly prevalent for tackling complex tasks. However, the substantial Key-Value (KV) cache required for long-context LLMs poses significant deployment challenges. Existing approaches either discard potentially critical information needed for future generations or offer limited efficiency gains due to high computational overhead. In this paper, we introduce Chelsea, a simple yet effective framework for online KV cache clustering. Our approach is based on the observation that key states exhibit high similarity along the sequence dimension. To enable efficient clustering, we divide the sequence into chunks and propose Chunked Soft Matching, which employs an alternating partition strategy within each chunk and identifies clusters based on similarity. Chelsea then merges the KV cache within each cluster into a single centroid. Additionally, we provide a theoretical analysis of the computational complexity and the optimality of the intra-chunk partitioning strategy. Extensive experiments across various models and long-context benchmarks demonstrate that Chelsea achieves up to 80% reduction in KV cache memory usage while maintaining comparable model performance. Moreover, with minimal computational overhead, Chelsea accelerates the decoding stage of inference by up to 3.19times and reduces end-to-end latency by up to 2.72times.