Daily Papers

Legged robots face significant challenges in navigating complex environments, as they require precise real-time decisions for foothold selection and contact planning. While existing research has explored methods to select footholds based on terrain geometry or kinematics, a critical gap remains: few existing methods efficiently validate the existence of a non-collision swing trajectory. This paper addresses this gap by introducing KCFRC, a novel approach for efficient foothold reachability analysis. We first formally define the foothold reachability problem and establish a sufficient condition for foothold reachability. Based on this condition, we develop the KCFRC algorithm, which enables robots to validate foothold reachability in real time. Our experimental results demonstrate that KCFRC achieves remarkable time efficiency, completing foothold reachability checks for a single leg across 900 potential footholds in an average of 2 ms. Furthermore, we show that KCFRC can accelerate trajectory optimization and is particularly beneficial for contact planning in confined spaces, enhancing the adaptability and robustness of legged robots in challenging environments.

Whole-body humanoid manipulation of bulky, deformable, and shared-load objects requires distributed contact sensing and explicit force regulation, yet most imitation policies treat contact force only implicitly. On the other hand, different demonstration sources provide complementary modalities with inherent trade-offs: human demonstrations capture natural contact forces but not robot-executable actions, while teleoperation directly records robot actions but with less natural force regulation. This paper presents WT-UMI, a wearable whole-body tactile interface worn by human operators or mounted on humanoids, providing accurate observations of tactile images, contact forces, and end-effector poses across both human demonstration and humanoid teleoperation modes. We introduce a force-conditioned target-pose correction module that converts measured human poses into contact-aware robot targets by learning corrections from teleoperation data. To leverage the natural force interaction in human data, we propose a force-supervised planner that predicts end-effector pose chunks and contact-force trajectories. The predicted contact force serves as the reference for a tactile-based admittance controller. Across five contact-rich tasks spanning deformable objects, bulky rigid objects, and human--humanoid collaboration, WT-UMI improves success rate and reduces contact-position tracking error over four policy baselines. Our project page is available at https://wt-umi.github.io/WTUMI/.

Contact-rich manipulation requires world models to reason over complex contact dynamics from multimodal sensory observations. However, it remains unclear which representation properties fundamentally support stable long-horizon planning in contact-rich settings. In this paper, we present ContactWorld, a benchmark and systematic empirical study of vision-tactile world models spanning 12 contact-rich manipulation tasks, including insertion, disassembly, screwing, and exploratory interaction. Across extensive experiments, we find that representations that are both spatially structured and temporally continuous consistently achieve the strongest planning performance. In particular, point-cloud observations improve average planning success rates from 20.7% with wrist-view observations and 22.0% with front-view observations to 32.1%. We further find that the effectiveness of tactile sensing depends critically on cross-modal representation compatibility rather than modality scaling alone. Combining point-cloud observations with tactile force-field representations, which preserve richer spatial structure and interaction dynamics, further improves performance to 36.1%, yielding the strongest overall planning performance across all evaluated tasks. Moreover, tactile sensing becomes increasingly important under long-horizon planning objectives, where compounding prediction errors and contact uncertainty accumulate over time. Together, these findings highlight the importance of representation structure, multimodal compatibility, and long-horizon robustness in vision-tactile world models for contact-rich robotic manipulation.

Joint-Embedding Predictive Architectures (JEPAs) learn world models by predicting in representation space rather than reconstructing pixels, making them a natural backbone for latent model predictive control from offline demonstration logs. JEPA-style training optimizes short-horizon latent prediction, whereas planning requires a multi-step ranking of imagined futures by goal progress. Prior JEPA planners often inherit that ranking from embedding geometry, typically latent Euclidean distance, which arises as a byproduct of representation learning rather than as a progress cost mined from the logs. We propose temporal-distance JEPA (TD-JEPA), which retains the LeWM encoder--predictor backbone and mines a directed temporal cost from reward-free trajectories: same-trajectory step order supplies positive targets, cross-trajectory pairs act as heuristic negatives, and a rollout-consistency term matches the planner horizon. The mined supervision serves two roles: as the deployed planning cost when progress is topological, and as a representation signal that improves Euclidean planning when contact geometry dominates. Under locked evaluation, deploying the mined cost raises Two-Room success to 100.0% versus LeWM's 97.4%, while shared Euclidean planning on the same temporally trained checkpoint raises OGB-Cube by 14.2 points over LeWM and improves Push-T. Against LeWM and the concurrent RC-aux baseline under locked evaluation, TD-JEPA matches or exceeds both methods on every environment. Ablations show that the directed head, cross-trajectory negatives, and rollout consistency each contribute. TD-JEPA narrows the train--plan gap for JEPA world-model planners by discovering temporal progress structure in offline logs and co-designing cost form with plan-time deployment. Code is available at https://github.com/HKBU-KnowComp/TD-JEPA.

We introduce multi-task Visuo-Tactile World Models (VT-WM), which capture the physics of contact through touch reasoning. By complementing vision with tactile sensing, VT-WM better understands robot-object interactions in contact-rich tasks, avoiding common failure modes of vision-only models under occlusion or ambiguous contact states, such as objects disappearing, teleporting, or moving in ways that violate basic physics. Trained across a set of contact-rich manipulation tasks, VT-WM improves physical fidelity in imagination, achieving 33% better performance at maintaining object permanence and 29% better compliance with the laws of motion in autoregressive rollouts. Moreover, experiments show that grounding in contact dynamics also translates to planning. In zero-shot real-robot experiments, VT-WM achieves up to 35% higher success rates, with the largest gains in multi-step, contact-rich tasks. Finally, VT-WM demonstrates significant downstream versatility, effectively adapting its learned contact dynamics to a novel task and achieving reliable planning success with only a limited set of demonstrations.

Contact-rich bimanual manipulation involves precise coordination of two arms to change object states through strategically selected contacts and motions. Due to the inherent complexity of these tasks, acquiring sufficient demonstration data and training policies that generalize to unseen scenarios remain a largely unresolved challenge. Building on recent advances in planning through contacts, we introduce Generalizable Planning-Guided Diffusion Policy Learning (GLIDE), an approach that effectively learns to solve contact-rich bimanual manipulation tasks by leveraging model-based motion planners to generate demonstration data in high-fidelity physics simulation. Through efficient planning in randomized environments, our approach generates large-scale and high-quality synthetic motion trajectories for tasks involving diverse objects and transformations. We then train a task-conditioned diffusion policy via behavior cloning using these demonstrations. To tackle the sim-to-real gap, we propose a set of essential design options in feature extraction, task representation, action prediction, and data augmentation that enable learning robust prediction of smooth action sequences and generalization to unseen scenarios. Through experiments in both simulation and the real world, we demonstrate that our approach can enable a bimanual robotic system to effectively manipulate objects of diverse geometries, dimensions, and physical properties. Website: https://glide-manip.github.io/

Contact-rich manipulation requires not only vision-dominant task semantics but also closed-loop reactions to force/torque (F/T) transients. Yet, generative visuomotor policies are typically constrained to low-frequency updates due to inference latency and action chunking, underutilizing F/T for control-rate feedback. Furthermore, existing force-aware methods often inject force continuously and indiscriminately, lacking an explicit mechanism to schedule when / how much / where to apply force across different task phases. We propose PhaForce, a phase-scheduled visual--force policy that coordinates low-rate chunk-level planning and high-rate residual correction via a unified contact/phase schedule. PhaForce comprises (i) a contact-aware phase predictor (CAP) that estimates contact probability and phase belief, (ii) a Slow diffusion planner that performs dual-gated visual--force fusion with orthogonal residual injection to preserve vision semantics while conditioning on force, and (iii) a Fast corrector that applies control-rate phase-routed residuals in interpretable corrective subspaces for within-chunk micro-adjustments. Across multiple real-robot contact-rich tasks, PhaForce achieves an average success rate of 86% (+40 pp over baselines), while also substantially improving contact quality by regulating interaction forces and exhibiting robust adaptability to OOD geometric shifts.

Dexterous manipulation with contact-rich interactions is crucial for advanced robotics. While recent diffusion-based planning approaches show promise for simple manipulation tasks, they often produce unrealistic ghost states (e.g., the object automatically moves without hand contact) or lack adaptability when handling complex sequential interactions. In this work, we introduce DexHandDiff, an interaction-aware diffusion planning framework for adaptive dexterous manipulation. DexHandDiff models joint state-action dynamics through a dual-phase diffusion process which consists of pre-interaction contact alignment and post-contact goal-directed control, enabling goal-adaptive generalizable dexterous manipulation. Additionally, we incorporate dynamics model-based dual guidance and leverage large language models for automated guidance function generation, enhancing generalizability for physical interactions and facilitating diverse goal adaptation through language cues. Experiments on physical interaction tasks such as door opening, pen and block re-orientation, object relocation, and hammer striking demonstrate DexHandDiff's effectiveness on goals outside training distributions, achieving over twice the average success rate (59.2% vs. 29.5%) compared to existing methods. Our framework achieves an average of 70.7% success rate on goal adaptive dexterous tasks, highlighting its robustness and flexibility in contact-rich manipulation.

Generalizing tool manipulation requires both semantic planning and precise physical control. Modern generalist robot policies, such as Vision-Language-Action (VLA) models, often lack the physical grounding required for contact-rich tool manipulation. Conversely, existing contact-aware policies that leverage tactile or haptic sensing are typically instance-specific and fail to generalize across diverse tool geometries. Bridging this gap requires learning representations that are both semantically transferable and physically grounded, yet a fundamental barrier remains: diverse real-world tactile data are prohibitive to collect at scale, while direct zero-shot sim-to-real transfer is challenging due to the complex nonlinear deformation of soft tactile sensors. To address this, we propose Semantic-Contact Fields (SCFields), a unified 3D representation that fuses visual semantics with dense extrinsic contact estimates, including contact probability and force. SCFields is learned through a two-stage Sim-to-Real Contact Learning Pipeline: we first pre-train on large-scale simulation to learn geometry-aware contact priors, then fine-tune on a small set of real data pseudo-labeled via geometric heuristics and force optimization to align real tactile signals. The resulting force-aware representation serves as the dense observation input to a diffusion policy, enabling physical generalization to unseen tool instances. Experiments on scraping, crayon drawing, and peeling demonstrate robust category-level generalization, significantly outperforming vision-only and raw-tactile baselines. Project page: https://kevinskwk.github.io/SCFields/.

Robot learning has proven to be a general and effective technique for programming manipulators. Imitation learning is able to teach robots solely from human demonstrations but is bottlenecked by the capabilities of the demonstrations. Reinforcement learning uses exploration to discover better behaviors; however, the space of possible improvements can be too large to start from scratch. And for both techniques, the learning difficulty increases proportional to the length of the manipulation task. Accounting for this, we propose SPIRE, a system that first uses Task and Motion Planning (TAMP) to decompose tasks into smaller learning subproblems and second combines imitation and reinforcement learning to maximize their strengths. We develop novel strategies to train learning agents when deployed in the context of a planning system. We evaluate SPIRE on a suite of long-horizon and contact-rich robot manipulation problems. We find that SPIRE outperforms prior approaches that integrate imitation learning, reinforcement learning, and planning by 35% to 50% in average task performance, is 6 times more data efficient in the number of human demonstrations needed to train proficient agents, and learns to complete tasks nearly twice as efficiently. View https://sites.google.com/view/spire-corl-2024 for more details.

Multi-part assembly poses significant challenges for robots to execute long-horizon, contact-rich manipulation with generalization across complex geometries. We present Fabrica, a dual-arm robotic system capable of end-to-end planning and control for autonomous assembly of general multi-part objects. For planning over long horizons, we develop hierarchies of precedence, sequence, grasp, and motion planning with automated fixture generation, enabling general multi-step assembly on any dual-arm robots. The planner is made efficient through a parallelizable design and is optimized for downstream control stability. For contact-rich assembly steps, we propose a lightweight reinforcement learning framework that trains generalist policies across object geometries, assembly directions, and grasp poses, guided by equivariance and residual actions obtained from the plan. These policies transfer zero-shot to the real world and achieve 80% successful steps. For systematic evaluation, we propose a benchmark suite of multi-part assemblies resembling industrial and daily objects across diverse categories and geometries. By integrating efficient global planning and robust local control, we showcase the first system to achieve complete and generalizable real-world multi-part assembly without domain knowledge or human demonstrations. Project website: http://fabrica.csail.mit.edu/

Generalizable long-horizon robotic assembly requires reasoning at multiple levels of abstraction. While end-to-end imitation learning (IL) is a promising approach, it typically requires large amounts of expert demonstration data and often struggles to achieve the high precision demanded by assembly tasks. Reinforcement learning (RL) approaches, on the other hand, have shown some success in high-precision assembly, but suffer from sample inefficiency, which limits their effectiveness in long-horizon tasks. To address these challenges, we propose a hierarchical modular approach, named Adaptive Robotic Compositional Hierarchy (ARCH), which enables long-horizon, high-precision robotic assembly in contact-rich settings. ARCH employs a hierarchical planning framework, including a low-level primitive library of parameterized skills and a high-level policy. The low-level primitive library includes essential skills for assembly tasks, such as grasping and inserting. These primitives consist of both RL and model-based policies. The high-level policy, learned via IL from a handful of demonstrations, without the need for teleoperation, selects the appropriate primitive skills and instantiates them with input parameters. We extensively evaluate our approach in simulation and on a real robotic manipulation platform. We show that ARCH generalizes well to unseen objects and outperforms baseline methods in terms of success rate and data efficiency. More details are available at: https://long-horizon-assembly.github.io.

Behaviour Cloning (BC) has driven remarkable progress in robot manipulation, yet it is fundamentally limited by its inability to self-improve: a policy that fails cannot learn from that failure without additional human demonstrations. Reinforcement Learning fine-tuning offers a path to self-improvement but has proven difficult to scale to the multi-billion-parameter models underpinning modern robot policies. We propose Q-Planning, which equips a large visuomotor BC policy with a small off-policy Q-function. Because a Q-function estimates value rather than imitates actions, it can be trained on the same successful demonstrations as the BC policy and later absorb both successful and failed deployment rollouts, an asymmetry BC does not have. We exploit this asymmetry to enable value-guided action selection at inference (a single-step Q-weighted average over BC draws) and online self-improvement that fine-tunes only the Q-function, leaving the BC weights untouched. On LIBERO and bimanual RoboTwin, ten iterations of self-improvement lift every benchmark score we tested (LIBERO-10 93% to 99%, RoboTwin 83.8% to 91.4%) and shorten successful episodes on the near-ceiling suites (LIBERO-Object, LIBERO-Goal). On two contact-rich bimanual real-robot tasks, the same loop (BC frozen, no human intervention) improves purely from its own deployment rollouts: stack-cups 40% to 90% and insert-wallet 25% to 80% in five iterations, whereas SFT on successful rollouts alone stalls at 55% and 30%. Under an identical online budget Q-Planning is the only method, among Best-of-N, filtered SFT, IBRL, DSRL, and DAWR, that improves stably from failures without training an auxiliary actor.

Imitation learning is a promising approach for training humanoid robots to both walk and manipulate, but it requires a large number of demonstrations, which are time-intensive and difficult to collect via teleoperation. Existing data-generation algorithms can automatically synthesize demonstrations for manipulators, but they are ineffective on humanoids because their high-dimensional composite action spaces involve arms, legs, and torsos. We present HumanoidMimicGen, a method for generating humanoid legged loco-manipulation data. Our method adapts contact-rich whole-body skills from a handful of source demonstrations to new states, generalizing across changes in object pose. By interleaving these single- and dual-arm skills with whole-body locomotion and manipulation planning, the method generates stable, collision-free data across diverse scenes and layouts. To evaluate our approach, we introduce a new simulated loco-manipulation benchmark containing nine diverse tasks that test humanoid loco-manipulation capabilities. There, we demonstrate that HumanoidMimicGen automatically generates large datasets for imitation learning and enables a systematic study of how data generation and policy learning decisions impact model performance. We show that whole-body visuomotor policies co-trained with data generated by HumanoidMimicGen outperform those trained only on real-world data by 20%.

Current Visual-Language Navigation (VLN) methodologies face a trade-off between semantic understanding and control precision. While Multimodal Large Language Models (MLLMs) offer superior reasoning, deploying them as low-level controllers leads to high latency, trajectory oscillations, and poor generalization due to weak geometric grounding. To address these limitations, we propose Fly0, a framework that decouples semantic reasoning from geometric planning. The proposed method operates through a three-stage pipeline: (1) an MLLM-driven module for grounding natural language instructions into 2D pixel coordinates; (2) a geometric projection module that utilizes depth data to localize targets in 3D space; and (3) a geometric planner that generates collision-free trajectories. This mechanism enables robust navigation even when visual contact is lost. By eliminating the need for continuous inference, Fly0 reduces computational overhead and improves system stability. Extensive experiments in simulation and real-world environments demonstrate that Fly0 outperforms state-of-the-art baselines, improving the Success Rate by over 20\% and reducing Navigation Error (NE) by approximately 50\% in unstructured environments. Our code is available at https://github.com/xuzhenxing1/Fly0.

Vision-Language Models (VLMs) exhibit remarkable common-sense and semantic reasoning capabilities. However, they lack a grounded understanding of physical dynamics. This limitation arises from training VLMs on static internet-scale visual-language data that contain no causal interactions or action-conditioned changes. Consequently, it remains challenging to leverage VLMs for fine-grained robotic manipulation tasks that require physical understanding, reasoning, and corresponding action planning. To overcome this, we present SIMPACT, a test-time, SIMulation-enabled ACTion Planning framework that equips VLMs with physical reasoning through simulation-in-the-loop world modeling, without requiring any additional training. From a single RGB-D observation, SIMPACT efficiently constructs physics simulations, enabling the VLM to propose informed actions, observe simulated rollouts, and iteratively refine its reasoning. By integrating language reasoning with physics prediction, our simulation-enabled VLM can understand contact dynamics and action outcomes in a physically grounded way. Our method demonstrates state-of-the-art performance on five challenging, real-world rigid-body and deformable manipulation tasks that require fine-grained physical reasoning, outperforming existing general-purpose robotic manipulation models. Our results demonstrate that embedding physics understanding via efficient simulation into VLM reasoning at test time offers a promising path towards generalizable embodied intelligence. Project webpage can be found at https://simpact-bot.github.io

Planning has been very successful for control tasks with known environment dynamics. To leverage planning in unknown environments, the agent needs to learn the dynamics from interactions with the world. However, learning dynamics models that are accurate enough for planning has been a long-standing challenge, especially in image-based domains. We propose the Deep Planning Network (PlaNet), a purely model-based agent that learns the environment dynamics from images and chooses actions through fast online planning in latent space. To achieve high performance, the dynamics model must accurately predict the rewards ahead for multiple time steps. We approach this using a latent dynamics model with both deterministic and stochastic transition components. Moreover, we propose a multi-step variational inference objective that we name latent overshooting. Using only pixel observations, our agent solves continuous control tasks with contact dynamics, partial observability, and sparse rewards, which exceed the difficulty of tasks that were previously solved by planning with learned models. PlaNet uses substantially fewer episodes and reaches final performance close to and sometimes higher than strong model-free algorithms.

Learning long-horizon humanoid loco-manipulation poses a dual challenge: it requires not only the robust execution of meta-skills but also their seamless, closed-loop chaining equipped with autonomous recovery. Existing approaches remain limited: explicit humanoid-object interaction representations offer precision but are notoriously difficult for high-level planning, whereas implicit skill embeddings are compact but lack the interpretability required for reliable composition. We propose \ours, a hierarchical framework centered on contact flow (CF), a compact representation consisting of key body trajectories and time-series binary contact signals. Leveraging this shared interface, our low-level policy CF-Track learns a unified library of loco-manipulation skills, while our high-level module CF-Gen heuristically synthesizes future contact-flow sequences. To support this setting, we additionally collect the OmniContact dataset, a MoCap-based HOI corpus for humanoid loco-manipulation (Appendix~sec:dataset). Together, they enable robust execution, autonomous failure recovery, and flexible composition of meta-skills for long-horizon tasks. Experiments show that OmniContact achieves \(98.7\%\) success on Carry Box and \(76.5\%\) on Push-Stack Boxes, outperforming prior baselines by average margins of \(40.9\%\) in meta-skill and \(66.5\%\) in skill chaining. Besides, our framework naturally integrates with VLMs for semantic task decomposition, enabling complex, semantically grounded loco-manipulation behaviors, such as arranging scattered boxes into a heart shape.

Learned policies trained end-to-end on large datasets often remain brittle in high-precision tasks and struggle with generalization. We find that these limitations largely stem from a lack of structure and focus in data collection. Our key insight is to leverage dense data collection only for the critical segment of contact-rich tasks and to rely on traditional planning during simple free-space motion. We propose an automated data-collection scheme in combination with offline deep reinforcement learning for the critical segment of the task, eliminating reliance on a teleoperator's skill and on online policy updates. Across four challenging real-world tasks, using only 2 to 2.5 hours of autonomous data collection, we achieve an average success rate of 96%, compared to the strongest baseline at 55%. Notably, performance remains high in out-of-distribution scenarios where end-to-end approaches struggle. Our results pave the way for targeted data collection for contact-rich tasks and for high success rates in precision applications.

Low Earth orbit (LEO) satellites increasingly carry compute hardware capable of on-board processing, yet each satellite generates roughly two orders of magnitude more data than it can downlink per orbit. This mismatch forces operators to decide, for every workload, which computation runs on-board and which runs on the ground, how intermediate data crosses the space-ground boundary through narrow contact windows, and how to maintain delivery guarantees over noisy channels. We present Constraint-Aware Execution (CAE), a planning system that takes a satellite identifier, a workload expressed as a directed acyclic graph of processing steps, and a set of orbital and resource constraints, and produces a deterministic, physically grounded execution plan. CAE operates in four phases: (1) orbital environment construction via SGP4 propagation with eclipse detection and ground station pass prediction, (2) compute placement using a cost model that compares on-board resource consumption against transfer overhead, (3) transfer insertion with adaptive forward error correction and security overhead modeling, and (4) greedy first-fit scheduling into orbital windows under power, thermal, compute, and communication constraints. We evaluate CAE against five representative workload patterns across satellites in distinct orbital regimes and demonstrate that the system produces feasible plans in under two seconds, correctly exploits onboard data reduction to minimize transfer volume, and adapts FEC and multi-pass allocation to varying channel conditions. CAE is deployed as a production API computing plans for any cataloged satellite using live two-line element data.

Ensuring safety in reinforcement learning (RL)-based robotic systems is a critical challenge, especially in contact-rich tasks within unstructured environments. While the state-of-the-art safe RL approaches mitigate risks through safe exploration or high-level recovery mechanisms, they often overlook low-level execution safety, where reflexive responses to potential hazards are crucial. Similarly, variable impedance control (VIC) enhances safety by adjusting the robot's mechanical response, yet lacks a systematic way to adapt parameters, such as stiffness and damping throughout the task. In this paper, we propose Bresa, a Bio-inspired Reflexive Hierarchical Safe RL method inspired by biological reflexes. Our method decouples task learning from safety learning, incorporating a safety critic network that evaluates action risks and operates at a higher frequency than the task solver. Unlike existing recovery-based methods, our safety critic functions at a low-level control layer, allowing real-time intervention when unsafe conditions arise. The task-solving RL policy, running at a lower frequency, focuses on high-level planning (decision-making), while the safety critic ensures instantaneous safety corrections. We validate Bresa on multiple tasks including a contact-rich robotic task, demonstrating its reflexive ability to enhance safety, and adaptability in unforeseen dynamic environments. Our results show that Bresa outperforms the baseline, providing a robust and reflexive safety mechanism that bridges the gap between high-level planning and low-level execution. Real-world experiments and supplementary material are available at project website https://jack-sherman01.github.io/Bresa.

Different research lines use the term world model in different ways, yet they share a common aim: to capture how the world evolves under action in a form that supports perception, simulation, and planning. Two prominent realizations are neural predictors that learn dynamics in continuous vector spaces, and hand-built physics engines that expose explicit state and physical laws. Neural predictors scale from data but leave the form of the dynamics implicit; physics engines are inspectable and editable but difficult to construct at scale. We introduce VisualPatchWorld (VPW), which represents world dynamics as code. VPW first selects a qualitative dynamical form with short active probes, then fits that form's free parameters from recorded state-action traces by minimizing multi-step prediction error. The resulting programs can be rolled forward like a simulator, inspected in source form, and used inside model-predictive control; image-derived scene graphs can supply the live state at replan time. Across comparisons with prior code-based world models, VPW attains 69.0% mean planning success and exceeds the strongest code baseline by 23.5 points. The largest gains arise when choosing the correct qualitative dynamics is essential. Under the same planner, the induced models approach ground-truth engine success on navigation and grasp-rich control; a residual gap remains for contact-rich pushing, and checking a shortlist of promising plans in the engine closes most of that gap. These results establish a practical route toward automatically constructed code world models that are useful for planning. Code is available at https://github.com/HKBU-KnowComp/VisualPatchWorld/.

The physical world has continuous state and action spaces, yet robot planning often benefits from hybrid discrete-continuous formulations that explicitly expose combinatorial structure, such as contact modes or discrete primitive actions. Existing methods typically rely on human-defined symbol sets or symbols derived from language supervision, without asking what makes a symbol computationally useful. In this paper, we take an inference-algorithm--centric view to define usefulness: a good symbol should expose the discrete commitments that simplify solving the original planning problem. We first introduce the concept of solver-sufficient symbolization by studying finite-horizon piecewise-affine systems, for which solver sufficiency can be precisely characterized, and develop a counterexample-guided algorithm for symbol invention. We then extend this principle to invent symbols for optimization objectives parameterized by general neural networks as energy functions, showing that solver-sufficient symbols can nevertheless be induced from their continuous optimization landscapes. Experiments on simulated and real-robot tasks show that the resulting symbols reduce solving cost while preserving solution quality, while also improving interpretability and steerability. Furthermore, our theoretical and algorithmic insights help explain why certain human-defined symbols are computationally useful.

Learning open-world mobile manipulation policies requires vast data to achieve spatial generalization, long-horizon robustness, and scene generalization. Current prevailing data collection paradigms, teleoperation and UMI, demand prohibitive human effort and cost at scale. To scale beyond the limits of manual data collection, we seek to maximize the value of each human demonstration by scalable data generation. To this end, we introduce WANDA: learning open-World mobile mANipulation from one demonstration via a synthetic DAta engine. WANDA first reconstructs background Gaussian splats and robot-object interaction trajectories from source RGBD observations, as a world substrate for later planning and rendering. It then rearranges contact-rich robot-object interaction segments into extensive spatial configurations, utilizing whole-body motion planning to chain them into new trajectories. To enhance long-horizon robustness, it applies Corrective State Expansion to increase the robot and object state diversity at different stages of mobile manipulation. To unlock cross-environment generalization, trajectories are synthesized on diverse generated 3D worlds from everyday photos. Furthermore, we synthesize photo-realistic observations by compositing rendered robot and object meshes with Gaussian splatting backgrounds. We evaluate our approach on extensive simulation and real-world tasks in various scenes. Experiments show that policies trained with WANDA achieve long-horizon robustness, broad spatial generalization and cross-environment generalization from one real demonstration. Moreover, WANDA naturally supports cross-embodiment data generation, validated by zero-shot deployment on another mobile manipulator with a distinct morphology.

Joint-embedding predictive architectures (JEPAs) learn compact latent world models without pixel reconstruction. Existing JEPA pipelines typically train visual representations and action-conditioned dynamics before adding a control policy or solver. We introduce LeWAM, an end-to-end JEPA for control with: (1) a joint training objective over next latent state prediction and action flow matching, and (2) an isotropic Gaussian constraint on the latent state, enabling a single model to support direct policy execution and efficient planning by evaluating sampled actions with its learned latent dynamics. Compared with prior JEPAs in visual planning, LeWAM improves success rate from 28.6% to 89.7% on contact-rich tasks and from 10.9% to 46.2% on long-horizon tasks, and plans 32.3 times faster. On behavior cloning tasks in simulation and physical robots, LeWAM is also competitive with established methods. Interpretability analyses show that LeWAM learns control-relevant representations and action distributions effectively guiding test-time planning and control.

This paper introduces H-MaP, a hybrid sequential manipulation planner that addresses complex tasks requiring both sequential actions and dynamic contact mode switches. Our approach reduces configuration space dimensionality by decoupling object trajectory planning from manipulation planning through object-based waypoint generation, informed contact sampling, and optimization-based motion planning. This architecture enables handling of challenging scenarios involving tool use, auxiliary object manipulation, and bimanual coordination. Experimental results across seven diverse tasks demonstrate H-MaP's superior performance compared to existing methods, particularly in highly constrained environments where traditional approaches fail due to local minima or scalability issues. The planner's effectiveness is validated through both simulation and real-robot experiments.

Dexterous manipulation in everyday environments requires both anticipation and reaction: a robot must predict how contact should evolve while rapidly correcting local errors caused by slip, misalignment, unstable grasping, or force mismatch. Vision and language provide semantic and geometric guidance, but they cannot reliably reveal hidden contact states such as force, slip, and contact stability. Although tactile sensing exposes these physical cues, most existing policies treat touch as a low-frequency observation stream within a monolithic action model, coupling slow task reasoning, action generation, and fast contact feedback in a single loop. We introduce TouchWorld, a predictive-and-reactive tactile foundation model for dexterous manipulation. TouchWorld uses a hierarchical policy that separates vision-language subtask planning, tactile world-model prediction, visuo-tactile goal-conditioned action generation, and high-frequency tactile residual refinement. A High-Level Planning Layer produces executable subtasks and predicts tactile subgoals; a Visuo-Tactile Goal-Conditioned Policy generates nominal action chunks; and a Tactile-Conditioned Refinement Policy performs online residual correction using recent tactile and proprioceptive feedback. By using touch as both a predictive contact reference and a fast feedback signal, TouchWorld preserves the semantic generalization of vision-language-action policies while improving local contact adaptation. Across six long-horizon and contact-rich dexterous manipulation tasks, TouchWorld achieves 65.0% success in the clean setting and 53.7% success under human perturbations, outperforming the strongest baseline by 15.7 and 18.5 percentage points, respectively.

Developing world models that understand complex physical interactions is essential for advancing robotic planning and simulation.However, existing methods often struggle to accurately model the environment under conditions of data scarcity and complex contact-rich dynamic motion.To address these challenges, we propose ContactGaussian-WM, a differentiable physics-grounded rigid-body world model capable of learning intricate physical laws directly from sparse and contact-rich video sequences.Our framework consists of two core components: (1) a unified Gaussian representation for both visual appearance and collision geometry, and (2) an end-to-end differentiable learning framework that differentiates through a closed-form physics engine to infer physical properties from sparse visual observations.Extensive simulations and real-world evaluations demonstrate that ContactGaussian-WM outperforms state-of-the-art methods in learning complex scenarios, exhibiting robust generalization capabilities.Furthermore, we showcase the practical utility of our framework in downstream applications, including data synthesis and real-time MPC.

Tactile feedback is generally recognized to be crucial for effective interaction with the physical world. However, state-of-the-art Vision-Language-Action (VLA) models lack the ability to interpret and use tactile signals, limiting their effectiveness in contact-rich tasks. Incorporating tactile feedback into these systems is challenging due to the absence of large multi-modal datasets. We present VLA-Touch, an approach that enhances generalist robot policies with tactile sensing without fine-tuning the base VLA. Our method introduces two key innovations: (1) a pipeline that leverages a pretrained tactile-language model that provides semantic tactile feedback for high-level task planning, and (2) a diffusion-based controller that refines VLA-generated actions with tactile signals for contact-rich manipulation. Through real-world experiments, we demonstrate that our dual-level integration of tactile feedback improves task planning efficiency while enhancing execution precision. Code is open-sourced at https://github.com/jxbi1010/VLA-Touch{this URL}.

Robotic generalization relies on physical intelligence: the ability to reason about state changes, contact-rich interactions, and long-horizon planning under egocentric perception and action. However, most VLMs are trained primarily on third-person data, creating a fundamental viewpoint mismatch for humanoid robots. Scaling robot egocentric data collection remains impractical due to high cost and limited diversity, whereas large-scale human egocentric videos offer a scalable alternative that naturally capture rich interaction context and causal structure. The key challenge is to convert raw egocentric videos into structured and reliable embodiment training supervision. Accordingly, we propose an Egocentric2Embodiment translation pipeline that transforms first-person videos into multi-level, schema-driven VQA supervision with enforced evidence grounding and temporal consistency, enabling the construction of the Egocentric2Embodiment dataset (E2E-3M) at scale. An egocentric-aware embodied brain, termed PhysBrain, is obtained by training on the E2E-3M dataset. PhysBrain exhibits substantially improved egocentric understanding, particularly for planning on EgoThink. It provides an egocentric-aware initialization that enables more sample-efficient VLA fine-tuning and higher SimplerEnv success rates (53.9\%), demonstrating effective transfer from human egocentric supervision to downstream robot control.

LLM agents that orchestrate frozen vision-language-action (VLA) policies improve across episodes through text memory, which records what the agent did but not how the task is done. A demonstration video shows it, but fits poorly into an agent's context. The full video slows every turn, fixed keyframes lose the contact detail that decides whether a grasp holds, and what the agent needs shifts from the task's structure while planning to the frames around each contact. We introduce Recursive Video In-Context Learning (RV-ICL), a training-free method that turns a demonstration into a hierarchy the agent navigates rather than a prompt it receives. The hierarchy is built from the sub-events of the demonstration, such as grasps and releases. Its levels grow finer, from keyframes of the whole task to phases, moments and short clips, and are exposed through read-only tools. The agent reads the coarse levels before planning. During execution it re-enters the hierarchy whenever a step needs more detail and loads only the clip of its current sub-goal. One demonstration per task is enough. Built on RPent, RV-ICL raises success from 92.6% to 96.5% on LIBERO-PRO and from 86.7% to 95.8% on LIBERO-Plus.

We study test-time evolution for humanoid loco-manipulation: solving tasks that a controller was never trained for by repurposing its existing skills, improving from its own attempts, and retaining what it learns, without retraining. Our key insight is that a broad controller already holds much of the competence a new task needs, and that this competence becomes accessible through an interface between planning and control that is expressive enough to specify contact-rich, multi-stage interactions, yet executable and measurable enough that execution feedback can guide planning from experience. InterEvolve realizes this interface with two components. First, we develop an object-aware forward-backward (FB) behavioral foundation model, whose object residuals on a frozen body prior turn a new reward about the body or objects into loco-manipulation behavior at test time. Second, we specify tasks as reward programs: staged rewards with completion conditions and tunable constants. A large language model (LLM) agent revises the program structure in context, drawing on execution feedback and a skill library of verified programs, while a numerical optimizer tunes its constants. With every candidate verified across parallel simulation scenarios, the program explores new ways to induce, repurpose, and compose the controller's existing motor competence for the task at hand, and thus improves over iterations. Experiments show that human-designed rewards leave much of the FB model's loco-manipulation competence untapped, whereas the programs InterEvolve evolves release it, sometimes through novel strategies. It further produces behaviors for diverse tasks, complex scenes, and long-horizon compositions in simulation, and evolved skills run autonomously on a physical Unitree G1 from egocentric onboard perception.

Multimodal Large Language Models (MLLMs) have demonstrated remarkable video reasoning capabilities across diverse tasks. However, their ability to understand human intent at a fine-grained level in egocentric videos remains largely unexplored. Existing benchmarks focus primarily on episode-level intent reasoning, overlooking the finer granularity of step-level intent understanding. Yet applications such as intelligent assistants, robotic imitation learning, and augmented reality guidance require understanding not only what a person is doing at each step, but also why and what comes next, in order to provide timely and context-aware support. To this end, we introduce EgoIntent, a step-level intent understanding benchmark for egocentric videos. It comprises 3,014 steps spanning 15 diverse indoor and outdoor daily-life scenarios, and evaluates models on three complementary dimensions: local intent (What), global intent (Why), and next-step plan (Next). Crucially, each clip is truncated immediately before the key outcome of the queried step (e.g., contact or grasp) occurs and contains no frames from subsequent steps, preventing future-frame leakage and enabling a clean evaluation of anticipatory step understanding and next-step planning. We evaluate 15 MLLMs, including both state-of-the-art closed-source and open-source models. Even the best-performing model achieves an average score of only 33.31 across the three intent dimensions, underscoring that step-level intent understanding in egocentric videos remains a highly challenging problem that calls for further investigation.

Generalist robot learning remains constrained by data: large-scale, diverse, and high-quality interaction data are expensive to collect in the real world. While simulation has become a promising way for scaling up data collection, the related tasks, including simulation task design, task-aware scene generation, expert demonstration synthesis, and sim-to-real transfer, still demand substantial human effort. We present AnyTask, an automated framework that pairs massively parallel GPU simulation with foundation models to design diverse manipulation tasks and synthesize robot data. We introduce three AnyTask agents for generating expert demonstrations aiming to solve as many tasks as possible: 1) ViPR, a novel task and motion planning agent with VLM-in-the-loop Parallel Refinement; 2) ViPR-Eureka, a reinforcement learning agent with generated dense rewards and LLM-guided contact sampling; 3) ViPR-RL, a hybrid planning and learning approach that jointly produces high-quality demonstrations with only sparse rewards. We train behavior cloning policies on generated data, validate them in simulation, and deploy them directly on real robot hardware. The policies generalize to novel object poses, achieving 44% average success across a suite of real-world pick-and-place, drawer opening, contact-rich pushing, and long-horizon manipulation tasks. Our project website is at https://anytask.rai-inst.com .

Vision-Language-Action (VLA) models advance robotic control via strong visual-linguistic priors. However, existing VLAs predominantly frame pretraining as supervised behavior cloning, overlooking the fundamental nature of robot learning as a goal-reaching process that requires understanding temporal task progress. We present PRTS (Primitive Reasoning and Tasking System), a VLA foundation model that reformulates pretraining through Goal-Conditioned Reinforcement Learning. By treating language instructions as goals and employing contrastive reinforcement learning, PRTS learns a unified embedding space where the inner product of state-action and goal embeddings approximates the log-discounted goal occupancy, the probability of reaching the language-specified goal from the current state-action, quantitatively assessing physical feasibility beyond static semantic matching. PRTS draws this dense goal-reachability supervision directly from offline trajectories without reward annotations, and folds it into the VLM backbone via a role-aware causal mask, incurring negligible overhead over vanilla behavior cloning. This paradigm endows the high-level reasoning system with intrinsic goal reachability awareness, bridging semantic reasoning and temporal task progress, and further benefits goal-conditioned action prediction. Pretrained on 167B tokens of diverse manipulation and embodied-reasoning data, PRTS reaches state-of-the-art performance on LIBERO, LIBERO-Pro, LIBERO-Plus, SimplerEnv, and a real-world suite of 14 complex tasks, with particularly substantial gains on long-horizon, contact-rich, and zero-shot novel-instruction settings, confirming that injecting goal-reachability awareness significantly improves both execution success and long-horizon planning of general-purpose robotic foundation policies.

In the field of urban planning, general-purpose large language models often struggle to meet the specific needs of planners. Tasks like generating urban planning texts, retrieving related information, and evaluating planning documents pose unique challenges. To enhance the efficiency of urban professionals and overcome these obstacles, we introduce PlanGPT, the first specialized Large Language Model tailored for urban and spatial planning. Developed through collaborative efforts with institutions like the Chinese Academy of Urban Planning, PlanGPT leverages a customized local database retrieval framework, domain-specific fine-tuning of base models, and advanced tooling capabilities. Empirical tests demonstrate that PlanGPT has achieved advanced performance, delivering responses of superior quality precisely tailored to the intricacies of urban planning.

Large Language Models have transformed the Contact Center industry, manifesting in enhanced self-service tools, streamlined administrative processes, and augmented agent productivity. This paper delineates our system that automates call driver generation, which serves as the foundation for tasks such as topic modeling, incoming call classification, trend detection, and FAQ generation, delivering actionable insights for contact center agents and administrators to consume. We present a cost-efficient LLM system design, with 1) a comprehensive evaluation of proprietary, open-weight, and fine-tuned models and 2) cost-efficient strategies, and 3) the corresponding cost analysis when deployed in production environments.

This paper presents a novel object-centric contact representation ContactGen for hand-object interaction. The ContactGen comprises three components: a contact map indicates the contact location, a part map represents the contact hand part, and a direction map tells the contact direction within each part. Given an input object, we propose a conditional generative model to predict ContactGen and adopt model-based optimization to predict diverse and geometrically feasible grasps. Experimental results demonstrate our method can generate high-fidelity and diverse human grasps for various objects. Project page: https://stevenlsw.github.io/contactgen/

Travel planning is a natural real-world task to test large language models (LLMs) planning and tool-use abilities. Although prior work has studied LLM performance on travel planning, existing settings still differ from real-world needs, mainly due to limited domain coverage, insufficient modeling of users' implicit preferences in multi-turn conversations, and a lack of clear evaluation of agents' capability boundaries. To mitigate these gaps, we propose TravelBench, a benchmark for fully real-world travel planning. We collect user queries, user profile and tools from real scenarios, and construct three subtasks-Single-Turn, Multi-Turn, and Unsolvable-to evaluate agent's three core capabilities in real settings: (1) solving problems autonomously, (2) interacting with users over multiple turns to refine requirements, and (3) recognizing the limits of own abilities. To enable stable tool invocation and reproducible evaluation, we cache real tool-call results and build a sandbox environment that integrates ten travel-related tools. Agents can combine these tools to solve most practical travel planning problems, and our systematic verification demonstrates the stability of the proposed benchmark. We further evaluate multiple LLMs on TravelBench and conduct an in-depth analysis of their behaviors and performance. TravelBench provides a practical and reproducible evaluation benchmark to advance research on LLM agents for travel planning.\footnote{Our code and data will be available after internal review.

Today's classical planners are powerful, but modeling input tasks in formats such as PDDL is tedious and error-prone. In contrast, planning with Large Language Models (LLMs) allows for almost any input text, but offers no guarantees on plan quality or even soundness. In an attempt to merge the best of these two approaches, some work has begun to use LLMs to automate parts of the PDDL creation process. However, these methods still require various degrees of expert input. We present NL2Plan, the first domain-agnostic offline LLM-driven planning system. NL2Plan uses an LLM to incrementally extract the necessary information from a short text prompt before creating a complete PDDL description of both the domain and the problem, which is finally solved by a classical planner. We evaluate NL2Plan on four planning domains and find that it solves 10 out of 15 tasks - a clear improvement over a plain chain-of-thought reasoning LLM approach, which only solves 2 tasks. Moreover, in two out of the five failure cases, instead of returning an invalid plan, NL2Plan reports that it failed to solve the task. In addition to using NL2Plan in end-to-end mode, users can inspect and correct all of its intermediate results, such as the PDDL representation, increasing explainability and making it an assistive tool for PDDL creation.

Large language models (LLMs) are used in chatbots or AI assistants to hold conversations with a human user. In such applications, the quality (e.g., user engagement, safety) of a conversation is important and can only be exactly known at the end of the conversation. To maximize its expected quality, conversation planning reasons about the stochastic transitions within a conversation to select the optimal LLM response at each turn. Existing simulation-based conversation planning algorithms typically select the optimal response by simulating future conversations with a large number of LLM queries at every turn. However, this process is extremely time-consuming and hence impractical for real-time conversations. This paper presents a novel approach called Semantic space COnversation Planning with improved Efficiency (SCOPE) that exploits the dense semantic representation of conversations to perform conversation planning efficiently. In particular, SCOPE models the stochastic transitions in conversation semantics and their associated rewards to plan entirely within the semantic space. This allows us to select the optimal LLM response at every conversation turn without needing additional LLM queries for simulation. As a result, SCOPE can perform conversation planning 70 times faster than conventional simulation-based planning algorithms when applied to a wide variety of conversation starters and two reward functions seen in the real world, yet achieving a higher reward within a practical planning budget. Our code can be found at: https://github.com/chenzhiliang94/convo-plan-SCOPE.

We introduce NATURAL PLAN, a realistic planning benchmark in natural language containing 3 key tasks: Trip Planning, Meeting Planning, and Calendar Scheduling. We focus our evaluation on the planning capabilities of LLMs with full information on the task, by providing outputs from tools such as Google Flights, Google Maps, and Google Calendar as contexts to the models. This eliminates the need for a tool-use environment for evaluating LLMs on Planning. We observe that NATURAL PLAN is a challenging benchmark for state of the art models. For example, in Trip Planning, GPT-4 and Gemini 1.5 Pro could only achieve 31.1% and 34.8% solve rate respectively. We find that model performance drops drastically as the complexity of the problem increases: all models perform below 5% when there are 10 cities, highlighting a significant gap in planning in natural language for SoTA LLMs. We also conduct extensive ablation studies on NATURAL PLAN to further shed light on the (in)effectiveness of approaches such as self-correction, few-shot generalization, and in-context planning with long-contexts on improving LLM planning.

LLMs have immense potential for generating plans, transforming an initial world state into a desired goal state. A large body of research has explored the use of LLMs for various planning tasks, from web navigation to travel planning and database querying. However, many of these systems are tailored to specific problems, making it challenging to compare them or determine the best approach for new tasks. There is also a lack of clear and consistent evaluation criteria. Our survey aims to offer a comprehensive overview of current LLM planners to fill this gap. It builds on foundational work by Kartam and Wilkins (1990) and examines six key performance criteria: completeness, executability, optimality, representation, generalization, and efficiency. For each, we provide a thorough analysis of representative works and highlight their strengths and weaknesses. Our paper also identifies crucial future directions, making it a valuable resource for both practitioners and newcomers interested in leveraging LLM planning to support agentic workflows.