new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 17

LoRA-based methods on Unet for transfer learning in Subarachnoid Hematoma Segmentation

Aneurysmal subarachnoid hemorrhage (SAH) is a life-threatening neurological emergency with mortality rates exceeding 30%. Transfer learning from related hematoma types represents a potentially valuable but underexplored approach. Although Unet architectures remain the gold standard for medical image segmentation due to their effectiveness on limited datasets, Low-Rank Adaptation (LoRA) methods for parameter-efficient transfer learning have been rarely applied to convolutional neural networks in medical imaging contexts. We implemented a Unet architecture pre-trained on computed tomography scans from 124 traumatic brain injury patients across multiple institutions, then fine-tuned on 30 aneurysmal SAH patients from the University of Michigan Health System using 3-fold cross-validation. We developed a novel CP-LoRA method based on tensor CP-decomposition and introduced DoRA variants (DoRA-C, convDoRA, CP-DoRA) that decompose weight matrices into magnitude and directional components. We compared these approaches against existing LoRA methods (LoRA-C, convLoRA) and standard fine-tuning strategies across different modules on a multi-view Unet model. LoRA-based methods consistently outperformed standard Unet fine-tuning. Performance varied by hemorrhage volume, with all methods showing improved accuracy for larger volumes. CP-LoRA achieved comparable performance to existing methods while using significantly fewer parameters. Over-parameterization with higher ranks consistently yielded better performance than strictly low-rank adaptations. This study demonstrates that transfer learning between hematoma types is feasible and that LoRA-based methods significantly outperform conventional Unet fine-tuning for aneurysmal SAH segmentation.

  • 7 authors
·
Aug 3, 2025

Learning to Distill Global Representation for Sparse-View CT

Sparse-view computed tomography (CT) -- using a small number of projections for tomographic reconstruction -- enables much lower radiation dose to patients and accelerated data acquisition. The reconstructed images, however, suffer from strong artifacts, greatly limiting their diagnostic value. Current trends for sparse-view CT turn to the raw data for better information recovery. The resultant dual-domain methods, nonetheless, suffer from secondary artifacts, especially in ultra-sparse view scenarios, and their generalization to other scanners/protocols is greatly limited. A crucial question arises: have the image post-processing methods reached the limit? Our answer is not yet. In this paper, we stick to image post-processing methods due to great flexibility and propose global representation (GloRe) distillation framework for sparse-view CT, termed GloReDi. First, we propose to learn GloRe with Fourier convolution, so each element in GloRe has an image-wide receptive field. Second, unlike methods that only use the full-view images for supervision, we propose to distill GloRe from intermediate-view reconstructed images that are readily available but not explored in previous literature. The success of GloRe distillation is attributed to two key components: representation directional distillation to align the GloRe directions, and band-pass-specific contrastive distillation to gain clinically important details. Extensive experiments demonstrate the superiority of the proposed GloReDi over the state-of-the-art methods, including dual-domain ones. The source code is available at https://github.com/longzilicart/GloReDi.

  • 5 authors
·
Aug 16, 2023

3DGabSplat: 3D Gabor Splatting for Frequency-adaptive Radiance Field Rendering

Recent prominence in 3D Gaussian Splatting (3DGS) has enabled real-time rendering while maintaining high-fidelity novel view synthesis. However, 3DGS resorts to the Gaussian function that is low-pass by nature and is restricted in representing high-frequency details in 3D scenes. Moreover, it causes redundant primitives with degraded training and rendering efficiency and excessive memory overhead. To overcome these limitations, we propose 3D Gabor Splatting (3DGabSplat) that leverages a novel 3D Gabor-based primitive with multiple directional 3D frequency responses for radiance field representation supervised by multi-view images. The proposed 3D Gabor-based primitive forms a filter bank incorporating multiple 3D Gabor kernels at different frequencies to enhance flexibility and efficiency in capturing fine 3D details. Furthermore, to achieve novel view rendering, an efficient CUDA-based rasterizer is developed to project the multiple directional 3D frequency components characterized by 3D Gabor-based primitives onto the 2D image plane, and a frequency-adaptive mechanism is presented for adaptive joint optimization of primitives. 3DGabSplat is scalable to be a plug-and-play kernel for seamless integration into existing 3DGS paradigms to enhance both efficiency and quality of novel view synthesis. Extensive experiments demonstrate that 3DGabSplat outperforms 3DGS and its variants using alternative primitives, and achieves state-of-the-art rendering quality across both real-world and synthetic scenes. Remarkably, we achieve up to 1.35 dB PSNR gain over 3DGS with simultaneously reduced number of primitives and memory consumption.

  • 8 authors
·
Aug 7, 2025

Disentangling Representation Evolution in Transformers through Directional Decomposition

Transformer representations evolve through learned additive transformations that either preserve their current direction or redirect it. We study this evolution as a functional geometry, decomposing learned updates into parallel and perpendicular components. Across pretrained models, we find substantial parallel components beyond the residual identity path. We then apply the decomposition in two spaces: to attention and MLP updates relative to the hidden state, and to attention value aggregation relative to the current token's value. Targeted edits reveal a strongly space-dependent asymmetry: exclude-self value-space parallel manipulation is markedly more robust than residual-space and perpendicular counterparts, preserving the direct self message while scaling only the non-self aggregate. The same decomposition gives a component-resolved description of compression-induced update error: perpendicular error separates compression methods more clearly than parallel error. Extensive experiments further demonstrate that full-aggregate parallel suppression during from-scratch pretraining lowers validation-loss trajectories and improves downstream averages, with the value-space variant strongest. Together, these results connect representation geometry to editing robustness, compression diagnosis, and training-time intervention. Code is available in the https://github.com/Shwai-He/Transformer-Geometry{project repository}.

ByteDance ByteDance
·
Sep 13 2

On the Failure of Topic-Matched Contrast Baselines in Multi-Directional Refusal Abliteration

Inasmuch as the removal of refusal behavior from instruction-tuned language models by directional abliteration requires the extraction of refusal-mediating directions from the residual stream activation space, and inasmuch as the construction of the contrast baseline against which harmful prompt activations are compared has been treated in the existing literature as an implementation detail rather than a methodological concern, the present work investigates whether a topically matched contrast baseline yields superior refusal directions. The investigation is carried out on the Qwen~3.5 2B model using per-category matched prompt pairs, per-class Self-Organizing Map extraction, and Singular Value Decomposition orthogonalization. It was found that topic-matched contrast produces no functional refusal directions at any tested weight level on any tested layer, while unmatched contrast on the same model, same extraction code, and same evaluation protocol achieves complete refusal elimination on six layers. The geometric analysis of the failure establishes that topic-matched subtraction cancels the dominant activation component shared between harmful and harmless prompts of the same subject, reducing the extracted direction magnitude below the threshold at which weight-matrix projection perturbs the residual stream. The implications for the design of contrast baselines in abliteration research are discussed.

  • 1 authors
·
Mar 22

MuonQ: Enhancing Low-Bit Muon Quantization via Directional Fidelity Optimization

The Muon optimizer has emerged as a compelling alternative to Adam for training large language models, achieving remarkable computational savings through gradient orthogonalization. However, Muon's optimizer state is more sensitive to quantization errors: because the orthogonalization discards the magnitudes of singular values and retains only directional information, even small quantization errors in singular vector directions are amplified in the update. In this work, we propose MuonQ, a low-bit Muon training framework built on the principle of directional fidelity optimization. First, we apply a pre-quantization normalization so that each step introduces quantization errors of the same magnitude, preventing the accumulated error from developing a preferred direction. Second, we introduce a structural decomposition that separately quantizes the dominant singular components via power iteration, ensuring that quantization errors perturb only singular value magnitudes rather than rotating singular vector directions. Third, we adopt μ-law companding quantization to allocate higher resolution to densely packed momentum values, shifting the quantization objective from outlier preservation to dense-region distinguishability. Together, these techniques enable stable 4-bit quantization of Muon's optimizer states. Pre-training experiments on GPT-style and LLaMA-style models demonstrate that MuonQ at 4-bit precision closely matches full-precision Muon in both training loss and downstream task accuracy, while reducing optimizer state memory by up to 7.3 times. Our code is available at https://github.com/YupengSu/MuonQ.

  • 5 authors
·
May 11

DC-Merge: Improving Model Merging with Directional Consistency

Model merging aims to integrate multiple task-adapted models into a unified model that preserves the knowledge of each task. In this paper, we identify that the key to this knowledge retention lies in maintaining the directional consistency of singular spaces between merged multi-task vector and individual task vectors. However, this consistency is frequently compromised by two issues: i) an imbalanced energy distribution within task vectors, where a small fraction of singular values dominate the total energy, leading to the neglect of semantically important but weaker components upon merging, and ii) the geometric inconsistency of task vectors in parameter space, which causes direct merging to distort their underlying directional geometry. To address these challenges, we propose DC-Merge, a method for directional-consistent model merging. It first balances the energy distribution of each task vector by smoothing its singular values, ensuring all knowledge components are adequately represented. These energy-balanced vectors are then projected onto a shared orthogonal subspace to align their directional geometries with minimal reconstruction error. Finally, the aligned vectors are aggregated in the shared orthogonal subspace and projected back to the original parameter space. Extensive experiments on vision and vision-language benchmarks show that DC-Merge consistently achieves state-of-the-art performance in both full fine-tuning and LoRA settings. The implementation code is available at https://github.com/Tobeginwith/DC-Merge.

  • 6 authors
·
Mar 6

CodeBoost: Boosting Code LLMs by Squeezing Knowledge from Code Snippets with RL

Code large language models (LLMs) have become indispensable tools for building efficient and automated coding pipelines. Existing models are typically post-trained using reinforcement learning (RL) from general-purpose LLMs using "human instruction-final answer" pairs, where the instructions are usually from manual annotations. However, collecting high-quality coding instructions is both labor-intensive and difficult to scale. On the other hand, code snippets are abundantly available from various sources. This imbalance presents a major bottleneck in instruction-based post-training. We propose CodeBoost, a post-training framework that enhances code LLMs purely from code snippets, without relying on human-annotated instructions. CodeBoost introduces the following key components: (1) maximum-clique curation, which selects a representative and diverse training corpus from code; (2) bi-directional prediction, which enables the model to learn from both forward and backward prediction objectives; (3) error-aware prediction, which incorporates learning signals from both correct and incorrect outputs; (4) heterogeneous augmentation, which diversifies the training distribution to enrich code semantics; and (5) heterogeneous rewarding, which guides model learning through multiple reward types including format correctness and execution feedback from both successes and failures. Extensive experiments across several code LLMs and benchmarks verify that CodeBoost consistently improves performance, demonstrating its effectiveness as a scalable and effective training pipeline.

  • 10 authors
·
Aug 7, 2025

Switch-KD: Visual-Switch Knowledge Distillation for Vision-Language Models

Vision-Language Models (VLMs) have shown remarkable capabilities in joint vision-language understanding, but their large scale poses significant challenges for deployment in resource-constrained scenarios. Knowledge Distillation (KD) offers a viable way to improve model capabilities without increasing model size or data requirements, making deployment more efficient. However, applying KD to VLMs is challenged by modality-specific supervision: although multimodal knowledge in VLMs is fused within the language space, current methods supervise each modality separately without explicitly addressing multimodal alignment, leading to inconsistent multimodal knowledge transfer. To address this, we propose Switch-KD, a visual-switch distillation framework that unifies vision-language knowledge transfer within a shared text-probability space. Switch-KD comprises two key components: (1) Visual-Switch Distillation, which switches the student's visual outputs into the teacher's language pathway to construct cross-modal probabilistic references for implicit visual knowledge transfer; and (2) Dynamic Bi-directional Logits Difference (DBiLD) loss, which adaptively aligns informative probability regions while preserving the distributional structures of teacher and student through bidirectional supervision. Guided by Switch-KD, a 0.5B TinyLLaVA effectively distills rich multimodal knowledge from its 3B teacher, yielding an average improvement of 3.6 points across 10 multimodal benchmarks without any architectural modification.

An Advanced Ensemble Deep Learning Framework for Stock Price Prediction Using VAE, Transformer, and LSTM Model

This research proposes a cutting-edge ensemble deep learning framework for stock price prediction by combining three advanced neural network architectures: The particular areas of interest for the research include but are not limited to: Variational Autoencoder (VAE), Transformer, and Long Short-Term Memory (LSTM) networks. The presented framework is aimed to substantially utilize the advantages of each model which would allow for achieving the identification of both linear and non-linear relations in stock price movements. To improve the accuracy of its predictions it uses rich set of technical indicators and it scales its predictors based on the current market situation. By trying out the framework on several stock data sets, and benchmarking the results against single models and conventional forecasting, the ensemble method exhibits consistently high accuracy and reliability. The VAE is able to learn linear representation on high-dimensional data while the Transformer outstandingly perform in recognizing long-term patterns on the stock price data. LSTM, based on its characteristics of being a model that can deal with sequences, brings additional improvements to the given framework, especially regarding temporal dynamics and fluctuations. Combined, these components provide exceptional directional performance and a very small disparity in the predicted results. The present solution has given a probable concept that can handle the inherent problem of stock price prediction with high reliability and scalability. Compared to the performance of individual proposals based on the neural network, as well as classical methods, the proposed ensemble framework demonstrates the advantages of combining different architectures. It has a very important application in algorithmic trading, risk analysis, and control and decision-making for finance professions and scholars.

  • 2 authors
·
Mar 27, 2025

Hybrid Convolution and Frequency State Space Network for Image Compression

Learned image compression (LIC) has recently benefited from Transformer based and state space model (SSM) based architectures. Convolutional neural networks (CNNs) effectively capture local high frequency details, whereas Transformers and SSMs provide strong long range modeling capabilities but may cause structural information loss or ignore frequency characteristics that are crucial for compression. In this work we propose HCFSSNet, a Hybrid Convolution and Frequency State Space Network for LIC. HCFSSNet uses CNNs to extract local high frequency structures and introduces a Vision Frequency State Space (VFSS) block that models long range low frequency information. The VFSS block combines an Omni directional Neighborhood State Space (VONSS) module, which scans features horizontally, vertically and diagonally, with an Adaptive Frequency Modulation Module (AFMM) that applies content adaptive weighting of discrete cosine transform frequency components for more efficient bit allocation. To further reduce redundancy in the entropy model, we integrate AFMM with a Swin Transformer to form a Frequency Swin Transformer Attention Module (FSTAM) for frequency aware side information modeling. Experiments on the Kodak, Tecnick and CLIC Professional Validation datasets show that HCFSSNet achieves competitive rate distortion performance compared with recent SSM based codecs such as MambaIC, while using significantly fewer parameters. On Kodak, Tecnick and CLIC, HCFSSNet reduces BD rate over the VTM anchor by 18.06, 24.56 and 22.44 percent, respectively, providing an efficient and interpretable hybrid architecture for future learned image compression systems.

  • 5 authors
·
Nov 25, 2025

Decouple and Orthogonalize: A Data-Free Framework for LoRA Merging

With more open-source models available for diverse tasks, model merging has gained attention by combining models into one, reducing training, storage, and inference costs. Current research mainly focuses on model merging for full fine-tuning, overlooking the popular LoRA. However, our empirical analysis reveals that: a) existing merging methods designed for full fine-tuning perform poorly on LoRA; b) LoRA modules show much larger parameter magnitude variance than full fine-tuned weights; c) greater parameter magnitude variance correlates with worse merging performance. Considering that large magnitude variances cause deviations in the distribution of the merged parameters, resulting in information loss and performance degradation, we propose a Decoupled and Orthogonal merging approach(DO-Merging). By separating parameters into magnitude and direction components and merging them independently, we reduce the impact of magnitude differences on the directional alignment of the merged models, thereby preserving task information. Furthermore, we introduce a data-free, layer-wise gradient descent method with orthogonal constraints to mitigate interference during the merging of direction components. We provide theoretical guarantees for both the decoupling and orthogonal components. And we validate through extensive experiments across vision, language, and multi-modal domains that our proposed DO-Merging can achieve significantly higher performance than existing merging methods at a minimal cost. Notably, each component can be flexibly integrated with existing methods, offering near free-lunch improvements across tasks.

  • 8 authors
·
May 21, 2025

Low-Dimensional High-Leverage Subspace Optimization: Beyond Full-Parameter Coupled Training for Neural Network Quantization

Low-bit quantization suffers severe accuracy degradation on compact networks, rooted in the dominant full-parameter coupled training paradigm that ignores parameter subspace heterogeneity. Their limited feature redundancy leaves little room to absorb quantization errors. Conventional pipelines adopt monolithic optimization: PTQ reconstructs fixed pretrained models without improving inherent quantization friendliness; QAT updates all parameters jointly, suffering from gradient coupling between backbone weights and calibration parameters. In this paper, we identify normalization affine parameters as a low-dimensional high-leverage subspace dominating quantization robustness, and propose Normalization Affine Preconditioning (NAP) for targeted subspace optimization. For PTQ, NAP freezes backbone weights and fine-tunes only affine parameters under the target fake-quantization graph on full-precision models, proactively boosting quantization friendliness before downstream reconstruction. For QAT, we introduce an alternating QAT-NAP schema that decouples feature learning and numerical calibration, breaking the performance ceiling of saturated joint training. Theoretical analysis confirms BN affine parameters fully cancel the channel-wise affine component of quantization distortion, while nonlinear rounding and clipping residuals form the irreducible error boundary; distillation-guided NAP acts as directional flatness optimization, projecting teacher-student logit mismatch onto the restricted subspace. Experiments on ImageNet and CIFAR-100 show NAP recovers severely collapsed low-bit quantization, consistently boosts reconstruction-based PTQ, and outperforms saturated full-parameter QAT with negligible tuning cost. This work reveals the principle of targeted low-dimensional subspace optimization, offering a new perspective beyond full-parameter coupled training for efficient deep learning.

  • 3 authors
·
Aug 3

It Takes Two: A Duet of Periodicity and Directionality for Burst Flicker Removal

Flicker artifacts, arising from unstable illumination and row-wise exposure inconsistencies, pose a significant challenge in short-exposure photography, severely degrading image quality. Unlike typical artifacts, e.g., noise and low-light, flicker is a structured degradation with specific spatial-temporal patterns, which are not accounted for in current generic restoration frameworks, leading to suboptimal flicker suppression and ghosting artifacts. In this work, we reveal that flicker artifacts exhibit two intrinsic characteristics, periodicity and directionality, and propose Flickerformer, a transformer-based architecture that effectively removes flicker without introducing ghosting. Specifically, Flickerformer comprises three key components: a phase-based fusion module (PFM), an autocorrelation feed-forward network (AFFN), and a wavelet-based directional attention module (WDAM). Based on the periodicity, PFM performs inter-frame phase correlation to adaptively aggregate burst features, while AFFN exploits intra-frame structural regularities through autocorrelation, jointly enhancing the network's ability to perceive spatially recurring patterns. Moreover, motivated by the directionality of flicker artifacts, WDAM leverages high-frequency variations in the wavelet domain to guide the restoration of low-frequency dark regions, yielding precise localization of flicker artifacts. Extensive experiments demonstrate that Flickerformer outperforms state-of-the-art approaches in both quantitative metrics and visual quality. The source code is available at https://github.com/qulishen/Flickerformer.

SciForma: Structure-Faithful Generation of Scientific Diagrams

Structural fidelity is essential to scientific methodology diagrams. To communicate research logic, these diagrams must faithfully render components, directional relations, and textual annotations. Since a single error, such as a reversed arrow or an unreadable equation, can invalidate the entire figure, structural fidelity is inherently conjunctive: correctness on one axis cannot compensate for failure on another. Current open-source models fail to satisfy this criterion. Supervised fine-tuning (SFT) learns plausible layouts but cannot reliably ensure structural correctness, while scalar reward-based post-training obscures which structural dimension has failed. To address this, we introduce SciForma, a framework for the structure faithful generation of scientific methodology diagrams. Specifically, SciForma decomposes diagram quality into three structural axes: Component, Arrow, and Text, guided by a structural inventory. Built on this foundation, we curate SciFormaData-700K for structured training and SciFormaBench-2K for logic-verified evaluation. To close the gap left by SFT, we develop Multi-Dimensional Conjunctive Preference Optimization (M-DPO), which enforces simultaneous correctness across all axes and adaptively routes gradients to the most deficient dimension in post-training. The same structural inventory also enables iterative editing at inference time to correct residual errors. This combination allows SciForma-9B to exceed all open-source baselines and GPT-Image-1.5 on both SciFormaBench-2K and AIBench, bringing open scientific diagram generation close to proprietary-level structural fidelity. Our code and data will be available at: https://github.com/microsoft/SciForma.

Rethinking Brain Tumor Segmentation from the Frequency Domain Perspective

Precise segmentation of brain tumors, particularly contrast-enhancing regions visible in post-contrast MRI (areas highlighted by contrast agent injection), is crucial for accurate clinical diagnosis and treatment planning but remains challenging. However, current methods exhibit notable performance degradation in segmenting these enhancing brain tumor areas, largely due to insufficient consideration of MRI-specific tumor features such as complex textures and directional variations. To address this, we propose the Harmonized Frequency Fusion Network (HFF-Net), which rethinks brain tumor segmentation from a frequency-domain perspective. To comprehensively characterize tumor regions, we develop a Frequency Domain Decomposition (FDD) module that separates MRI images into low-frequency components, capturing smooth tumor contours and high-frequency components, highlighting detailed textures and directional edges. To further enhance sensitivity to tumor boundaries, we introduce an Adaptive Laplacian Convolution (ALC) module that adaptively emphasizes critical high-frequency details using dynamically updated convolution kernels. To effectively fuse tumor features across multiple scales, we design a Frequency Domain Cross-Attention (FDCA) integrating semantic, positional, and slice-specific information. We further validate and interpret frequency-domain improvements through visualization, theoretical reasoning, and experimental analyses. Extensive experiments on four public datasets demonstrate that HFF-Net achieves an average relative improvement of 4.48\% (ranging from 2.39\% to 7.72\%) in the mean Dice scores across the three major subregions, and an average relative improvement of 7.33% (ranging from 5.96% to 8.64%) in the segmentation of contrast-enhancing tumor regions, while maintaining favorable computational efficiency and clinical applicability. Code: https://github.com/VinyehShaw/HFF.

  • 8 authors
·
Jun 11, 2025

Round-Trip Consistency: Bidirectional Diffusion Models Can Predict Their Own Rollout Errors

Autoregressive models accumulate error over long rollouts, yet at deployment there is no ground truth to measure it against. We train a single conditional latent diffusion model that steps a dynamical system forward or backward in time via a direction flag, and show that this bidirectionality supplies a measurement-free test-time error signal: rolling forward i steps and then backward i steps must return the model to its start, so the round-trip discrepancy C_i is a self-supervised proxy for the unobservable rollout error: no ensembles, no held-out data, no governing equations, for one extra rollout. We validate on compressible magnetohydrodynamics (MHD), an astrophysical turbulent radiative mixing layer, and natural face videos (CelebV-HQ). On held-out MHD trajectories, C_i ranks rollout error (Spearman 0.91-0.98 at fixed depth; 0.69 pm 0.16 within trajectories), and a simple calibrator fit on training rollouts predicts its magnitude to within 1.14times (68%) and 1.29times (95%) with near-nominal coverage - one nat beyond a depth-only predictor, transferring to all six decoded physical fields. The same signal flags the out-of-distribution Orszag-Tang vortex (AUROC 0.98; 1.0 by depth 10) exactly where sampling-dispersion baselines invert, and it cuts incurred error by 15% at 80% coverage - three times the depth-only baseline. Bidirectional training comes at negative cost, beating direction specialists in both directions, and the backward direction doubles as a fast inverse solver. On LE-PDE-UQ's turbulent Navier-Stokes benchmark, a single bidirectional model reaches accuracy within 1.3times of their ten-model ensemble at a tenth of the training cost, with the best training-free pixel-level calibration. Round-trip consistency turns reversibility into a practical trust signal for generative models.

  • 1 authors
·
Aug 1 3

EAGOR: Embodied Reasoning in Omni-direction

Omni-directional (360°) cameras provide embodied agents with a holistic view of their surroundings, making them suited for directional reasoning in tasks such as navigation and object search. Existing Vision Language Models (VLMs) project 360° observations to 2D equirectangular projection (ERP) images and process them using architectures designed for perspective images. However, they ignore the spherical nature of 360° observations, where each pixel represents a viewing direction relative to the agent. Consequently, their direction estimates often become inconsistent under camera view transformations caused by agent motion. This limitation is particularly critical for map-free navigation, where the agent must continuously estimate the target direction in its egocentric frame. We propose EAGOR, a training-free, geometry-aware framework for embodied 360° directional reasoning. Instead of predicting target directions as ERP image coordinates, EAGOR formulates directional reasoning as recursive Bayesian estimation directly on the sphere. It maintains a continuous belief over target directions and propagates it equivariantly under agent motion without training the backbone VLMs. To achieve this, we introduce the Spherical Harmonic Belief Field (SH-BF), whose spherical harmonic representation provides a globally defined, rotation-aware basis for directional estimation on the spherical manifold. This formulation eliminates ERP seam discontinuities, latitude distortions, and interpolation errors. We evaluate EAGOR on two benchmark datasets and real-world experiments with a legged robot across directional reasoning tasks. EAGOR consistently outperforms existing methods, achieving average relative gains of +34.4% and +45.6% on HOS and OSR-Bench, respectively, while improving navigation success by +14.6%, reducing step count by 17.7%, and lowering mean angular error by 24.5%.

  • 5 authors
·
Jul 6

Can Text-to-Image Models Draw from the Right Frame of Reference?

Spatial instruction following has become a crucial requirement for text-to-image (T2I) generation. A common challenge arises when directional expressions are interpreted under different frames of reference. For example, ``the left of'' may refer to the viewer's image coordinates or to the intrinsic orientation of an object, leading to different expected layouts. Existing T2I benchmarks reveal important layout failures, yet they rarely isolate whether models can follow a specified frame of reference when it differs from camera view. To mitigate this gap, we introduce FoR-T2I, a benchmark for evaluating this distinction with 1,200 prompt pairs built from controlled spatial layouts. In each pair, the camera-view (Cam) prompt states the target relation in camera view, while the frame-of-reference (FoR) prompt describes the same target placement through an oriented anchor object. Across 22 closed-source and open-source T2I models, mean final accuracy is 41.8\% lower on FoR prompts than on matched Cam prompts; even the best-performing model achieves only 44.3\% FoR accuracy. This suggests that current models struggle more when the same layout is described through an object's orientation rather than directly in image coordinates. We further analyze this gap by relation type and camera view, compare several training-free prompting and feedback-based mitigation strategies, and propose a VLM-gated rewriting approach that selects rewritten prompts using visual feedback, improving average FoR accuracy from 25.0\% to 29.2\% under the same generation budget.

  • 8 authors
·
Aug 3 1

The Impact of High-Resolution Soil Moisture States on Short-Term Numerical Weather Prediction of Convective Initiation over South Africa

The interaction between the Earths surface and the atmosphere plays a key role in the initiation of cumulus convection. Over the land surface, a necessary boundary condition to consider for resolving land-atmosphere interactions is soil moisture. The aim in the study is twofold. One, through object oriented and traditional verification techniques determine how higher resolution soil moisture initial conditions influences the prediction of the location and timing of convective initiation (CI) within a convective permitting, operational NWP model over South Africa. Two, to study the modelled CI-soil moisture relationship during real afternoon thunderstorm events. The study reports the results from 66 Unified Model simulations (at 4.4km grid resolution) for nine summer afternoon CI events during synoptically benign conditions over South Africa. The higher resolution soil moisture conditions reduce centroid distance between observed and forecast storms on average by 7km (9 percent improvement), with the most decrease in centroid distance occurring at the shortest lead times, by 12km. Most improvement in location error occurs in the zonal directional. However, little to no difference is found in the timing of CI, most likely attributable to the dominant effect of model grid size on CI timing, overshadowing the influence from soil moisture anomalies. Probability of CI is highest over dry and moderate soils and areas along distinct soil moisture gradients. The conclusion is that modelled CI over South Africa preferentially occurs on the periphery of wet soil moisture patches, where there is increased surface convergence of wind and higher sensible heat flux.

  • 3 authors
·
Apr 5, 2021

Discovering Interpretable Directions in the Semantic Latent Space of Diffusion Models

Denoising Diffusion Models (DDMs) have emerged as a strong competitor to Generative Adversarial Networks (GANs). However, despite their widespread use in image synthesis and editing applications, their latent space is still not as well understood. Recently, a semantic latent space for DDMs, coined `h-space', was shown to facilitate semantic image editing in a way reminiscent of GANs. The h-space is comprised of the bottleneck activations in the DDM's denoiser across all timesteps of the diffusion process. In this paper, we explore the properties of h-space and propose several novel methods for finding meaningful semantic directions within it. We start by studying unsupervised methods for revealing interpretable semantic directions in pretrained DDMs. Specifically, we show that global latent directions emerge as the principal components in the latent space. Additionally, we provide a novel method for discovering image-specific semantic directions by spectral analysis of the Jacobian of the denoiser w.r.t. the latent code. Next, we extend the analysis by finding directions in a supervised fashion in unconditional DDMs. We demonstrate how such directions can be found by relying on either a labeled data set of real images or by annotating generated samples with a domain-specific attribute classifier. We further show how to semantically disentangle the found direction by simple linear projection. Our approaches are applicable without requiring any architectural modifications, text-based guidance, CLIP-based optimization, or model fine-tuning.

  • 4 authors
·
Mar 20, 2023

Direction-Preserving Number Representations

Low-precision number formats are widely used in modern machine learning systems due to their efficiency. Accurate direction representation is key to the accuracy of vector operations. This work precisely explores the extent to which the direction of a vector can be represented by selecting its scalar elements from a common finite alphabet of a given size. This is standard practice in machine learning, where low-precision significands may be narrow-width floating-point or integer values. A geometric framework is introduced for analyzing the directional coverage of such product-structured codes. This work analytically quantifies the suboptimality gap between such product-structured codes and spherical codes for the vector as a whole, in both low and asymptotically high dimensions. Furthermore, within the product code class, it is proven that the standard formats of two's complement, fixed-point, and floating-point are suboptimal, again with quantified gap, pointing to the potential to develop new scalar number formats. Such scalar alphabets are numerically optimized across multiple block dimensions for directional coverage, including the dimension used in NVIDIA's NVFP4 format. Experimental results are presented comparing the performance of standard formats and the optimized alphabet. We find that for four bits, NVIDIA's choice of E2M1 closely approximates the optimized alphabet, providing a geometric explanation for its strong performance in low-precision machine learning workloads and an analytical understanding of the link between that superiority and block size. We provide open-source formal proofs in Lean for the theorems in this work, along with the experimental code and the optimized alphabets obtained.

  • 2 authors
·
May 7

BiSegMamba: Efficient Bidirectional Tri-Oriented Mamba for 3D Medical Image Segmentation

Accurate 3D medical image segmentation requires both long-range volumetric context and fine boundary preservation. CNN-based methods have limited global dependency modeling, while Transformer-based models are often computationally expensive for dense 3D inputs. Recent Mamba-based methods provide an efficient alternative, but existing volumetric designs still depend on repeated high-resolution scanning, forward-only sequential modeling, and fixed directional summation, causing high cost, scan-order bias, and suboptimal directional aggregation. We propose BiSegMamba, an efficient bidirectional tri-oriented Mamba network for 3D medical image segmentation. BiSegMamba follows a compact-to-detail design, where a progressive compacting stem (PCS) enables efficient latent-space reasoning while retaining shallow high-resolution features for reconstruction. A multi-scale spatial mixer (MSSM) captures local anatomical patterns in early stages, and the proposed bidirectional tri-oriented Ortho Mamba (Bi-ToOM) block models long-range dependencies from multiple orthogonal views using jointly processed forward and backward scan sequences. Adaptive directional fusion (ADF) learns input-dependent channel-wise weights across scan orientations, replacing fixed summation with orientation-aware fusion. Experiments on a collected carotid CTA dataset and three public benchmarks, BraTS2023, ACDC, and AMOS-CT, show that BiSegMamba generalizes well across vascular, cardiac, brain tumor, and abdominal multi-organ segmentation tasks. Compared with SegMamba-V2, BiSegMamba achieves slightly better performance on BraTS2023 and clear improvements on ACDC and the carotid dataset, while reducing computational cost by up to 77.9% FLOPs, demonstrating a strong accuracy-efficiency balance for general 3D medical image segmentation.

  • 4 authors
·
May 28

How Fragile Is Safety Alignment at Frontier Scale? A Single-Direction Attack on a 320B MoE

Directional ablation removes an aligned language model's ability to refuse by projecting a single "refusal direction" out of the weights that write the residual stream. It needs no gradient-based training and no optimization, only a few hundred contrastive prompts, which makes it the canonical white-box attack on open-weight alignment. However, it has been established only on dense models up to roughly 70B parameters. We study whether it survives the shift to frontier mixture-of-experts (MoE) models whose residual streams are no longer a single tensor and whose weights ship quantized. We apply it to GLM-5.3-Flash (320B parameters, 288 routed experts, a four-wide hyper-connection residual, block-FP8). The attack survives the architecture, but what it reaches is no longer where a reader of the original recipe would look for it. Editing the attention, dense and routed-expert writers on their own removes 0.039, 0.016 and 0.148 of refusal respectively; editing all three together removes 0.776. As a result, 74% of the effect exists only under the joint intervention. The part the conventional recipe reaches by module-name matching accounts for 0.066 of that 0.776, which is why it fails silently on an MoE. The effect does not follow from removing just any direction: ablating a random direction orthogonal to it leaves refusal unchanged. A category-concentrated residue survives every edit we tried: subspaces fitted on violence, sexual content and hate leave measurable refusal at every rank from 1 to 12. We report the method, the 41-89 percentage-point reductions it achieves across seven harmful benchmarks with no detected change in capability, and the boundary where it stops.

  • 3 authors
·
Sep 8

Intervention anchors and scientific verification in synthetic vascular predictive representations

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

  • 7 authors
·
Oct 7

Perfect Detection, Failed Control: The Geometry of Knowing vs. Steering in Language Models

A central aspiration of mechanistic interpretability is controllability: if we know where a behavior is represented in a model's activations, we should be able to modify it. This rests on a hidden premise -- that the direction which detects a behavior and the direction which controls it are the same, or close. We test this geometrically: what is the angle between the direction that best detects a behavior and the one that best causes it? If detection implies control the cosine is near 1; otherwise it quantifies a detection-intervention gap. On Gemma 2-2B-it, output format (clean JSON vs markdown fencing) collapses both roles onto one axis. Hallucination does not: the model detects fake entities with perfect linear separability (AUC = 1.000 from layer 5), yet that direction sits at cos = 0.12 (about 83 degrees) from the direction producing a refusal -- a small, reproducible alignment, far from the cos = 1 that "detection is control" would require. A detector built from activations, with no chosen tokens, likewise fails to align (cos = -0.06). The gap generalizes: across four models from three families and two scales (1B-9B), cos stays in [0.12, 0.20], identical before and after instruction tuning (0.1197 vs 0.1200), placing its origin in pretraining. A 15-degree rotation toward the refusal direction partially bridges it -- 73% and 60% refusal on two held-out fake-entity categories at 1.8% false positives. We then ask whether this cosine predicts steerability, and it does not: detection is a high-dimensional class, not a single direction, and what separates the steerable case is functional, not readable from a static angle. The cosine is a weight-computable signature of the dissociation between knowing and steering, not a predictor of it.

  • 5 authors
·
Jun 22

Domain Boundaries in a Metallic Distortive Polar Metal

Polar metals are an underexplored material class combining two properties that are typically incompatible, namely a polar crystal structure and reasonable electrical conductivity. These intriguing materials offer a unique combination of properties, potentially relevant to optoelectronics, catalysis, memory devices, among other applications. The distortive polar metal (DPM) subclass forms through a symmetry-lifting phase transformation into a non-centrosymmetric polar crystal structure. In the process, domains with uniform geometric polar directions form, oftentimes separated by domain boundaries with polarity discontinuities arranged in "charged" head-to-head (H-H) or tail-to-tail (T-T) morphologies. To date, only metallic oxide DPM microstructures have been studied. Here we reveal, in the intermetallic DPM Mn_{5}Al_{8}, different surface interactions and electron transfer reactivity at domain boundaries depending on their H-H or T-T character. Variable surface reactivity suggests localized changes in electronic work functions due to an increase (H-H) or decrease (T-T) in the electronic density of states. These findings suggest that metallic DPMs may offer functionalizable domain boundaries and deserve increased attention, given that they allow tunable chemistries and various thermomechanical processing or transformation protocols. Ultimately, this study proposes unconventional metal physics, propelling the discovery and design of advanced electronic materials and devices.

  • 15 authors
·
Nov 20, 2025

Improving Neural Network Training by Decoupling the Magnitude and Direction of Weight Vectors

Modern neural network training relies on optimizers such as Adam and Muon which act on each weight matrix as a single object. Yet every weight matrix carries two distinct quantities -- a magnitude and a direction -- and all optimizers stepping in the matrix as a whole couple their dynamics: the directional change from an update depends on the current magnitude, while the magnitude drifts as a byproduct of learning the direction, so neither is governed directly by the learning rate. Typical training therefore leans on surrounding recipes such as weight decay and warmup to keep learning stable at scale, though these regulate the coupling only indirectly; other recent methods instead constrain the weight to a fixed-norm sphere, but add no learnable magnitude, leaving scale control to normalization layers alone. We propose Magnitude--Direction (MD) Decoupling, an optimizer modification that factorizes each weight into a fixed-norm direction on a hypersphere and learnable per-row and per-column magnitude gains, updated at separate learning rates, all while the model still sees a single fused weight tensor. The method is agnostic to the base optimizer and removes the need for weight decay and warmup. Across both Adam and Muon, MD Decoupling improves on well-tuned baselines, transfers the optimal LR across model width without retuning, and continues to help at scale on large Mixture-of-Experts (MoE) models. Treating magnitude and direction as separately controlled quantities thus yields more predictable training dynamics and a simple, broadly applicable improvement to modern optimizers.

  • 4 authors
·
Jun 23

SAID: Semantic Acoustic Imaging Detector for Sound Event Localization and Detection

In daily life, people hear speech, footsteps, and music around them. We can often recognize these sounds and judge where they come from. Each sound source can be shown on a separate acoustic map, a rectangular image covering 360^{circ} horizontally and 180^{circ} vertically. The map shows the directions occupied by the source as a region and the sound energy within that region. A class label identifies the sound. Predicting these labeled acoustic maps from audio is called semantic acoustic imaging. Such maps could help robots perceive their surroundings and allow augmented reality displays to show sound regions and classes over the real world. Existing models can recognize sound classes and estimate a direction for each source. However, a direction alone does not describe the source region or its energy. Acoustic imaging must also distinguish sound sources in nearby directions, while the number of active sources and the regions they occupy can change over time. We therefore propose the Semantic Acoustic Imaging Detector (SAID), which predicts a separate labeled acoustic map for each active source from audio. First, we pretrain Audio2Sph, SAID's audio encoder, through sound energy estimation across directions without class labels. Then, we train the complete SAID model to predict source regions, energy, and classes together. We also develop a pipeline that generates simulated recordings for pretraining and supports fine-tuning on real recordings. On the official DCASE2026 Task 3 Track A evaluation set, our submitted system ranks first with 0.1080 macro-averaged mean average precision (Macro mAP) and 0.3962 Macro Pearson r. Demos and code are provided at https://github.com/IN03X/SAID.

  • 4 authors
·
Sep 24

Residual Stream Duality in Modern Transformer Architectures

Recent work has made clear that the residual pathway is not mere optimization plumbing; it is part of the model's representational machinery. We agree, but argue that the cleanest way to organize this design space is through a two-axis view of the Transformer. A decoder evolves information along two ordered dimensions: sequence position and layer depth. Self-attention already provides adaptive mixing along the sequence axis, whereas the residual stream usually performs fixed addition along the depth axis. If we fix a token position and treat layer index as the ordered variable, then a causal depth-wise residual attention read is exactly the same local operator as causal short sliding-window attention (ShortSWA), except written over depth rather than over sequence. This is the core residual stream duality behind Transformer^2. This perspective also clarifies the recent literature. ELC-BERT and DenseFormer already show that learned aggregation over depth can outperform uniform residual accumulation, while Vertical Attention, DeepCrossAttention (DCA), MUDDFormer, and Attention Residuals move further toward explicit attention-based routing over earlier layers. The key point, however, is that operator-level duality does not imply systems-level symmetry. For large-scale autoregressive models, sequence-axis ShortSWA is usually the more hardware-friendly placement because it reuses token-side sliding-window kernels, KV-cache layouts, and chunked execution. If the goal is instead to change the shortcut itself, Deep Delta Learning (DDL) is the cleaner intervention because it modifies the residual operator directly rather than adding a separate cross-layer retrieval path. Our recommendation is therefore simple: use DDL when the shortcut is the object of interest, and use sequence-axis ShortSWA when the goal is local adaptive mixing.

math-ai math-ai
·
Mar 16 2

SALSA: Spatial Cue-Augmented Log-Spectrogram Features for Polyphonic Sound Event Localization and Detection

Sound event localization and detection (SELD) consists of two subtasks, which are sound event detection and direction-of-arrival estimation. While sound event detection mainly relies on time-frequency patterns to distinguish different sound classes, direction-of-arrival estimation uses amplitude and/or phase differences between microphones to estimate source directions. As a result, it is often difficult to jointly optimize these two subtasks. We propose a novel feature called Spatial cue-Augmented Log-SpectrogrAm (SALSA) with exact time-frequency mapping between the signal power and the source directional cues, which is crucial for resolving overlapping sound sources. The SALSA feature consists of multichannel log-spectrograms stacked along with the normalized principal eigenvector of the spatial covariance matrix at each corresponding time-frequency bin. Depending on the microphone array format, the principal eigenvector can be normalized differently to extract amplitude and/or phase differences between the microphones. As a result, SALSA features are applicable for different microphone array formats such as first-order ambisonics (FOA) and multichannel microphone array (MIC). Experimental results on the TAU-NIGENS Spatial Sound Events 2021 dataset with directional interferences showed that SALSA features outperformed other state-of-the-art features. Specifically, the use of SALSA features in the FOA format increased the F1 score and localization recall by 6% each, compared to the multichannel log-mel spectrograms with intensity vectors. For the MIC format, using SALSA features increased F1 score and localization recall by 16% and 7%, respectively, compared to using multichannel log-mel spectrograms with generalized cross-correlation spectra.

  • 5 authors
·
Oct 1, 2021

Zero-Shot Vision-and-Language Navigation with Collision Mitigation in Continuous Environment

We propose the zero-shot Vision-and-Language Navigation with Collision Mitigation (VLN-CM), which takes these considerations. VLN-CM is composed of four modules and predicts the direction and distance of the next movement at each step. We utilize large foundation models for each modules. To select the direction, we use the Attention Spot Predictor (ASP), View Selector (VS), and Progress Monitor (PM). The ASP employs a Large Language Model (e.g. ChatGPT) to split navigation instructions into attention spots, which are objects or scenes at the location to move to (e.g. a yellow door). The VS selects from panorama images provided at 30-degree intervals the one that includes the attention spot, using CLIP similarity. We then choose the angle of the selected image as the direction to move in. The PM uses a rule-based approach to decide which attention spot to focus on next, among multiple spots derived from the instructions. If the similarity between the current attention spot and the visual observations decreases consecutively at each step, the PM determines that the agent has passed the current spot and moves on to the next one. For selecting the distance to move, we employed the Open Map Predictor (OMP). The OMP uses panorama depth information to predict an occupancy mask. We then selected a collision-free distance in the predicted direction based on the occupancy mask. We evaluated our method using the validation data of VLN-CE. Our approach showed better performance than several baseline methods, and the OPM was effective in mitigating collisions for the agent.

  • 4 authors
·
Oct 7, 2024

Sparse Autoencoders Encode Both Concepts and Functions: The Downstream Geometry of Feature Effects

The wide-scale use of sparse autoencoders (SAEs) as interpretability tools is limited by inconsistent links between SAE features and model behavior. Features with clear activation descriptions may have weak or unexpected causal effects; steering can vary across prompts or oppose the intended direction; and activation-based feature selection can miss features that produce the desired output change. Prior work has studied feature geometry inside the model, where features are computed. We instead study the geometry of changes in model logits caused by feature interventions. We introduce Feature-Effect Geometry Analysis (FEGA), an unsupervised framework that removes the same active SAE feature across contexts and analyzes the resulting cloud of logit changes. Across SAE variants, consistent one-dimensional effects are rare: few features behave like reusable directions. To interpret this variation, we distinguish value-like features, tied to static information such as factual attributes, from pointer-like features, associated with context-dependent operations. Value-like features more often exhibit structured, low-dimensional effects, although these effects typically span several directions. Pointer-like features, by contrast, predominantly exhibit diffuse effects. Our results show that a feature can be interpretable and causally relevant without providing a stable direction for steering.

  • 5 authors
·
Jul 26

Does a Hosted Decision Model Respect Irrelevant Alternatives? A Pre-Registered Test of Option-Set Dependence in Jev

Decision APIs that return a probability for each option are routinely used as if those probabilities were properties of the options themselves. That reading is valid only if the model satisfies independence of irrelevant alternatives (IIA): adding an option that is neither the right answer nor its strongest rival should leave the odds between those two unchanged. We test this in a pre-registered study of jev-1.13.0, a hosted decision model, using 299,463 calls on intent classification (BANKING77, CLINC150) and topic classification (AG News). Every added option moves the log-odds between the gold label and the strongest wrong label: the root-mean-square systematic shift is 0.20-0.52 nats, 1.2 to 3 times the run-to-run variation, even when the added option takes at most 0.1% of the probability mass. The shifts are directional. An option similar to the wrong answer draws probability from it (+0.10 nats toward the gold label). A paraphrase of the wrong answer produces an intermediate pattern: the gold label's probability is almost conserved, but the paraphrase receives only about a third of the wrong answer's share rather than the half that strict substitution implies. The distortion grows steadily with the logarithm of the number of options, reaching about 1 nat at 255 options, and off-domain padding pushes the odds against the gold label. In contrast, questions packed into one call do not interact (bias < 0.001). Scoring each option with an independent yes/no question removes the option-set dependence but picks the right answer 8.7 points less often. Jev sits between two local baselines, an option-independent scorer and a prompt readout. Its probabilities are best read as relative to the option list they were computed over.

  • 3 authors
·
Oct 11

Exploring Gradient-based Multi-directional Controls in GANs

Generative Adversarial Networks (GANs) have been widely applied in modeling diverse image distributions. However, despite its impressive applications, the structure of the latent space in GANs largely remains as a black-box, leaving its controllable generation an open problem, especially when spurious correlations between different semantic attributes exist in the image distributions. To address this problem, previous methods typically learn linear directions or individual channels that control semantic attributes in the image space. However, they often suffer from imperfect disentanglement, or are unable to obtain multi-directional controls. In this work, in light of the above challenges, we propose a novel approach that discovers nonlinear controls, which enables multi-directional manipulation as well as effective disentanglement, based on gradient information in the learned GAN latent space. More specifically, we first learn interpolation directions by following the gradients from classification networks trained separately on the attributes, and then navigate the latent space by exclusively controlling channels activated for the target attribute in the learned directions. Empirically, with small training data, our approach is able to gain fine-grained controls over a diverse set of bi-directional and multi-directional attributes, and we showcase its ability to achieve disentanglement significantly better than state-of-the-art methods both qualitatively and quantitatively.

  • 5 authors
·
Sep 1, 2022

NEUROTOKEN: Joint Source and Directional AAD with Envelope Decoding via Conditional Flow Matching

Identifying which speaker a listener is attending to in a noisy room -- the cocktail-party problem -- is the missing ingredient for next-generation hearing aids and brain-computer interfaces: it tells the device whose voice to amplify. Auditory attention decoding (AAD) reads this answer from EEG, but the literature splits into disconnected pieces: directional-AAD classifies side but does not map side to stream; regression-based source-AAD ranks candidate streams by a single Pearson correlation that is intrinsically noisy at the 1-5 s windows real devices need; and envelope reconstruction has no native AAD rule. We argue the right object is not any single statistic but the conditional likelihood of the attended envelope given EEG, and we make this practical with NEUROTOKEN: a single network whose three heads share one EEG front-end, with a conditional flow-matching head (ATTUNEFLOW) that scores candidates by an integrated velocity-residual likelihood ratio. Two inference-time ensembles -- QUADTRACK (four complementary statistics) and ENV-FLOW (z-normalised QUADTRACK+ATTUNEFLOW) -- absorb per-statistic failure modes for free. On KU Leuven, DTU, and NJU at 5 s, ATTUNEFLOW lifts per-segment source-AAD by 9%-16% over the strongest non-generative baseline and shrinks across-subject variance by ~3x; trial-level fusion exceeds 93% on two of three datasets. In parallel reproductions we show that canonical 95-97% direction-AAD numbers collapse by 17%-45% under a strict trial-disjoint protocol, clarifying both the true ceiling and why a likelihood-based formulation is needed.

  • 2 authors
·
Sep 29

Tunable Tool-Call Rates in LLM Agents via Representation Steering

Deciding whether to call a tool is a core competence of an LLM agent, and a costly one to get wrong: needless calls add latency, accrue cost, and may trigger irreversible side effects, while missing calls leave the model confidently wrong on questions it could only answer through tool-calls. Models manage this balance poorly, both over-using and under-using tools. Existing methods such as post-training and prompt engineering are expensive and difficult to modify at inference time. We show that whether an instruction-tuned model calls a tool can be controlled by a single linear direction in its residual stream, extracted without any training from the model's own tool-use preference signal and turned into an inference-time intervention with no prompt change. Adding the direction with strength α moves the call rate monotonically from near 0% to over 90% while keeping calls well-formed. The steering works in both directions: dialing it down suppresses calls, and dialing it up induces new calls that land precisely on the questions the model cannot answer from its own knowledge. We also show that the direction generalizes to unseen tools with strength comparable to each tool's own direction and without favoring any specific tool choice. With live tool execution, a single sweep of the steering traces a cost/accuracy Pareto frontier and nearly doubles open-domain QA accuracy (0.29 ! rightarrow ! 0.56); the same recipe transfers across a diverse range of models spanning dense, MoE, and multimodal architectures, without any training. Our code is publicly available at https://github.com/YuqiChen4188/Steering-Tool-Use-Propensity.

  • 5 authors
·
Aug 24

Locating and Steering Refusal Beyond Attention

Where inside a language model does refusal live, and does that place change when the architecture does? In a transformer, refusal is governed by a single direction in the residual stream, a finding that safety and interpretability tooling now depend on. State-space models (SSMs) route information through a recurrent update instead of attention, sharing no token-mixing mechanism with a transformer. Does the same safety representation survive this shift, or must it be rediscovered per architecture? It survives. A single rigid rotation, which can only reorient a space and not reshape it, aligns one model's representation space with another's, so the two genuinely share the representation. A harm probe trained on a transformer then flags an SSM's harmful inputs, and removing the aligned direction makes a model answer attacks it would otherwise refuse, while a random direction of the same size does far less. What is architecture-specific is not where the direction is steered but where it must be read. Each layer computes a fresh output that is then added into the residual stream, and harm is cleanly readable at this output, the write site, before the addition. A control that holds the intervention's strength fixed shows that what matters is where the direction is estimated, not where it is applied. Applied through a detector-triggered gate, this direction lowers jailbreak success in all four architecture families we test (SSM, transformer, recurrent, hybrid), and on the SSM it holds against an attacker that tunes its prompt against the defense. The gate only matches a trivial rule that returns a fixed refusal whenever the same detector fires, so what transfers across architectures is the direction itself, not defense strength. Safety tooling built on refusal therefore ports to a new architecture by re-estimating the direction at that architecture's write site, not by rebuilding it.

  • 2 authors
·
Sep 3

On the Steering Dimensionality of Refusal in Language Models

Existing activation steering methods often assume that a high-level concept can be mediated by a single steering direction. To support this, two complementary interventions should be achieved: additive steering should induce the target behavior, while directional ablation should suppress it. Yet behaviors may occupy richer activation geometries beyond a single direction, and semantically similar behaviors may be represented by distinct directions. In this work, we study how many directions can reliably control two different types of refusal behaviors: refusal triggered by the safety alignment and refusal in general contexts. Given the limited expressive capability of a single steering vector, we study the general setting of steering subspaces and introduce the notion of steering dimensionality as the minimum subspace dimensionality required to reliably control a behavior. We characterize sufficient steering subspaces that cover the full extent of the target behavior through both the (monotonic) improvement before the sufficient dimensionality, and the saturation beyond it. Empirically, we find that refusal triggered by safety alignment is 1-dim steerable, while multiple distinct steering directions can achieve comparable control. In contrast, refusal in general contexts exhibits substantially richer activation geometry where even 5-dim steering subspaces fail to reliably capture its full steerable variation. Our results reveal that the activation geometry underlying refusal is highly context-dependent and can be substantially more complex than a single linear steering direction.

  • 5 authors
·
Oct 2

DGNet: Dual-knowledge Guided Network for Infrared Small Target Detection

InfRared Small Target Detection (IRSTD) is a prominent and challenging task in computer vision. In recent years, text-guided methods have significantly improved detection performance. However, they still suffer from two key limitations. First, a single text description simultaneously modeling both background and target leads to semantic entanglement, which contradicts the objective of background suppression and target enhancement. Second, reliance on image-specific textual prompts (requiring additional external models such as CLIP during inference) results in deployment constraints. To address these issues, we propose a novel Dual-knowledge Guided Network (DGNet) based on multiple generalizable texts. Specifically, we design a Prior-knowledge Wavelet Modulation (PWM) module, which leverages dual textual priors that separately characterize large-scale backgrounds and sparse targets to effectively disentangle and modulate entangled semantics in the frequency domain. Furthermore, we introduce a Consensus-knowledge Directional Alignment (CDA) loss, which models the initial state and the ideal target across samples as `complex background' and `bright target', respectively, thereby constructing a clear and unified directional optimization trajectory for the model. Extensive experiments on three public datasets demonstrate the superior performance of DGNet and the effectiveness of each component. The source code is available at https://github.com/iLearn-Lab/MM26-DGNet.

  • 6 authors
·
Aug 31

DeXplicit: Making Physical State Explicit in Dexterous Manipulation World Models

Before acting on an object, a robot needs to anticipate how its hand motion will change the physical world and what the resulting scene will look like. Existing approaches typically entangle action-conditioned dynamics, camera motion, and visual synthesis within a video generation model, or represent dynamics as point trajectories without explicit object structure. We introduce DeXplicit, a dexterous manipulation world model that instead predicts how the world evolves explicitly in metric 3D before rendering its visual consequences. Given an initial scene and a future hand trajectory, a lightweight 3D dynamics network predicts object-centric motion and deformation, providing structured and geometrically grounded future world states. These predictions then serve as a strong scaffold for video generation: appearance is transported through the predicted 3D motion and projected into future views, allowing the renderer to focus on completing uncertain and newly visible content rather than implicitly learning world dynamics from pixels. This explicit-3D-first decomposition also enables efficient causal generation, requiring only two denoising steps per block while conditioning on generated history. Across HOT3D, OakInk2, and PhysTwin, DeXplicit reduces moved-point error by 27-40% relative to PointWorld and improves object fidelity IoU+ by 47% on HOT3D under a shared renderer. Our design with two-step causal generation achieves a 57x speedup from our 14B bi-directional configuration in video synthesis.

  • 5 authors
·
Oct 21

A Dataset of Dynamic Reverberant Sound Scenes with Directional Interferers for Sound Event Localization and Detection

This report presents the dataset and baseline of Task 3 of the DCASE2021 Challenge on Sound Event Localization and Detection (SELD). The dataset is based on emulation of real recordings of static or moving sound events under real conditions of reverberation and ambient noise, using spatial room impulse responses captured in a variety of rooms and delivered in two spatial formats. The acoustical synthesis remains the same as in the previous iteration of the challenge, however the new dataset brings more challenging conditions of polyphony and overlapping instances of the same class. The most important difference of the new dataset is the introduction of directional interferers, meaning sound events that are localized in space but do not belong to the target classes to be detected and are not annotated. Since such interfering events are expected in every real-world scenario of SELD, the new dataset aims to promote systems that deal with this condition effectively. A modified SELDnet baseline employing the recent ACCDOA representation of SELD problems accompanies the dataset and it is shown to outperform the previous one. The new dataset is shown to be significantly more challenging for both baselines according to all considered metrics. To investigate the individual and combined effects of ambient noise, interferers, and reverberation, we study the performance of the baseline on different versions of the dataset excluding or including combinations of these factors. The results indicate that by far the most detrimental effects are caused by directional interferers.

  • 6 authors
·
Jun 13, 2021

DiSa: Directional Saliency-Aware Prompt Learning for Generalizable Vision-Language Models

Prompt learning has emerged as a powerful paradigm for adapting vision-language models such as CLIP to downstream tasks. However, existing methods often overfit to seen data, leading to significant performance degradation when generalizing to novel classes or unseen domains. To address this limitation, we propose DiSa, a Directional Saliency-Aware Prompt Learning framework that integrates two complementary regularization strategies to enhance generalization. First, our Cross-Interactive Regularization (CIR) fosters cross-modal alignment by enabling cooperative learning between prompted and frozen encoders. Within CIR, a saliency-aware masking strategy guides the image encoder to prioritize semantically critical image regions, reducing reliance on less informative patches. Second, we introduce a directional regularization strategy that aligns visual embeddings with class-wise prototype features in a directional manner to prioritize consistency in feature orientation over strict proximity. This approach ensures robust generalization by leveraging stable prototype directions derived from class-mean statistics. Extensive evaluations on 11 diverse image classification benchmarks demonstrate that DiSa consistently outperforms state-of-the-art prompt learning methods across various settings, including base-to-novel generalization, cross-dataset transfer, domain generalization, and few-shot learning.

  • 4 authors
·
May 25, 2025

AURA: Auditory Spatial Intelligence via a Unified Representation from a General-Audio Encoder through Complete Alignment

Answering spatial questions about multi-source scenes requires a model both to identify each sound and to locate it. Existing spatial audio-language models obtain spatial information from a dedicated encoder, which separates spatial and semantic processing into distinct feature spaces. We study whether a general-audio codec trained without spatial supervision can serve both purposes. A controlled layer-wise analysis shows that the frozen codec retains spatial information, with lateral cues carried by the difference between the two ear channels. This information, however, is not readily accessible: in dual-source scenes, a model trained on these features predicts left/right at chance and, on the remaining axes, assigns the detected direction to the queried and the non-queried source equally often. We attribute this failure to an audio--text information asymmetry, in which the audio contains both sources while the answer describes only the queried one. A controlled 2times2 experiment shows that either completing the scene description or exposing the inter-channel difference lifts left/right accuracy above chance, whereas binding directions to the queried source requires both. Building on these findings, AURA keeps the codec and the language model frozen and exceeds the strongest dedicated system on SpatialSoundQA by 10.31 points in dual-source direction accuracy, with about 40\% of its trainable parameters.

  • 9 authors
·
Nov 9 1

Every Ablation Is a Dose: Counterweights and the Semblance of Self-Repair

Ablate a component of a language model, and other components often appear to adjust and compensate. This phenomenon, termed self-repair, has been observed repeatedly, but its mechanism remains unclear. The most systematic study to date concluded that self-repair is noisy and unlikely to have a single explanation. We argue that it has one: a gain already present before any ablation. Any intervention on a causally important component can be viewed as a point on a coordinate axis λ, the signed strength of a counterfactual contrast. Hence, conventional ablation methods are uncalibrated points on this axis. We show that the causal repair response for a fine-grained unit r is governed by an affine law, E_r(λ)=own_r+γ_rλ. The slope γ_r is a fixed coefficient that consistently influences the model, with or without ablation, and its sign determines whether the unit counteracts or reinforces the removed signal. On a factual-verdict task across four models from distinct families (Gemma, Qwen, LLaMA, and Mistral), we identify components including MLP neurons, OV neurons, and singular directions that follow this affine law, 68 of 81 downstream directions in all. Moreover, we can anticipate the magnitude of γ_r from the fixed weights. On the IOI circuit of GPT-2 Small, seven of the ten heads the intervention can reach follow the law, and all seven are counterweights. From this perspective, what may appear as self-repair is a counterweight performing its usual operation when the contrastive signal emerges at the core.

  • 3 authors
·
Sep 30

Stable Part Diffusion 4D: Multi-View RGB and Kinematic Parts Video Generation

We present Stable Part Diffusion 4D (SP4D), a framework for generating paired RGB and kinematic part videos from monocular inputs. Unlike conventional part segmentation methods that rely on appearance-based semantic cues, SP4D learns to produce kinematic parts - structural components aligned with object articulation and consistent across views and time. SP4D adopts a dual-branch diffusion model that jointly synthesizes RGB frames and corresponding part segmentation maps. To simplify the architecture and flexibly enable different part counts, we introduce a spatial color encoding scheme that maps part masks to continuous RGB-like images. This encoding allows the segmentation branch to share the latent VAE from the RGB branch, while enabling part segmentation to be recovered via straightforward post-processing. A Bidirectional Diffusion Fusion (BiDiFuse) module enhances cross-branch consistency, supported by a contrastive part consistency loss to promote spatial and temporal alignment of part predictions. We demonstrate that the generated 2D part maps can be lifted to 3D to derive skeletal structures and harmonic skinning weights with few manual adjustments. To train and evaluate SP4D, we construct KinematicParts20K, a curated dataset of over 20K rigged objects selected and processed from Objaverse XL (Deitke et al., 2023), each paired with multi-view RGB and part video sequences. Experiments show that SP4D generalizes strongly to diverse scenarios, including real-world videos, novel generated objects, and rare articulated poses, producing kinematic-aware outputs suitable for downstream animation and motion-related tasks.

  • 5 authors
·
Sep 12, 2025 2

DOA Estimation for Low-Altitude Networks: HAD Architectures, Methods, and Challenges

With the rapid expansion of low-altitude economy (LAE) services and the growing demand for integrated sensing and communication (ISAC) in air-ground networks, reliable direction-of-arrival (DOA) estimation has become essential for both directional communication and sensing functions. DOA underpins beam alignment, spatial-reuse scheduling, and ISAC-critical tasks such as airspace situational awareness and multi-target monitoring. Hybrid analog-digital (HAD) architectures have emerged as a practical solution for large-aperture directional operation under stringent radio frequency (RF), analog-to-digital converter (ADC), and size, weight, and power (SWaP) constraints. However, HAD compresses antenna-domain observations through analog combining, fundamentally reshaping the measurement model and introducing new algorithmic and system-level challenges for DOA estimation. This article first reviews the principles and representative architectures of HAD, highlighting their advantages for scalable beam-centric and ISAC-oriented operation in LAE scenarios. We then provide a structured overview of HAD-enabled DOA estimation methodologies, including spatial covariance matrix (SCM) reconstruction, multi-combiner scan-based acquisition, and pilot-aided estimation, along with key design tradeoffs. Finally, we discuss open challenges and outline reliability-driven research directions toward robust, deployable HAD-enabled DOA solutions for practical ISAC-enabled low-altitude environments.

  • 7 authors
·
Mar 31

Weather Jiu-Jitsu: Exploring the Feasibility of Control Paradigms in Weather Foundation Models

Weather Jiu-Jitsu is a control paradigm for extreme climatological events, inspired by chaos theory. As a proposition, small, precise, targeted, and cost-inexpensive perturbations can redirect trajectories of a large dynamical system. This strategy has been demonstrated analytically in the Lorenz-63 system, where a naturally chaotic trajectory switching between two attractors can be confined to a single attractor, indefinitely, via arbitrarily small perturbations. This paper examines the feasibility of Microsoft's Aurora -- a 1.3 billion parameter global atmospheric model -- as a test bed for this strategy. This paper explores three questions: (1) Is Aurora a reliable enough simulation environment to serve as a meaningful testbed? (2) Are the perturbations required to redirect its trajectories small enough to be physically plausible? (3) Does Aurora's learned latent space (the parametric estimators on climatological attributes) yield any apparent, structured, and/or perhaps interpretable features that can convey a geo/atmospheric response to initial conditions? We find evidence consistent with all three: Aurora's modeled trajectories respond to perturbations beyond measurement drift, the perturbation magnitudes required are small relative to the model's own forecast uncertainty, and its latent representations exhibit directional structure that responds to Jiu-Jitsu-type interventions, even though that structure does not separate extreme from normal states outright. These results should be read as feasibility diagnostics rather than a demonstration of control: we do not implement or test an actual steering intervention on Aurora, and several of our findings, particularly around the model's latent-space geometry, are exploratory.

  • 3 authors
·
Sep 29

Physics-Informed Image Restoration via Progressive PDE Integration

Motion blur, caused by relative movement between camera and scene during exposure, significantly degrades image quality and impairs downstream computer vision tasks such as object detection, tracking, and recognition in dynamic environments. While deep learning-based motion deblurring methods have achieved remarkable progress, existing approaches face fundamental challenges in capturing the long-range spatial dependencies inherent in motion blur patterns. Traditional convolutional methods rely on limited receptive fields and require extremely deep networks to model global spatial relationships. These limitations motivate the need for alternative approaches that incorporate physical priors to guide feature evolution during restoration. In this paper, we propose a progressive training framework that integrates physics-informed PDE dynamics into state-of-the-art restoration architectures. By leveraging advection-diffusion equations to model feature evolution, our approach naturally captures the directional flow characteristics of motion blur while enabling principled global spatial modeling. Our PDE-enhanced deblurring models achieve superior restoration quality with minimal overhead, adding only approximately 1\% to inference GMACs while providing consistent improvements in perceptual quality across multiple state-of-the-art architectures. Comprehensive experiments on standard motion deblurring benchmarks demonstrate that our physics-informed approach improves PSNR and SSIM significantly across four diverse architectures, including FFTformer, NAFNet, Restormer, and Stripformer. These results validate that incorporating mathematical physics principles through PDE-based global layers can enhance deep learning-based image restoration, establishing a promising direction for physics-informed neural network design in computer vision applications.

  • 3 authors
·
Nov 9, 2025

Steerable but Not Decodable: Function Vectors Operate Beyond the Logit Lens

Activation steering presupposes that task-relevant behaviors correspond to linear directions in activation space -- directions that should both steer the model and be readable along the unembedding. Function vectors (FVs), extracted as mean differences across ICL demonstrations, are the canonical test case; the prediction: steering and decoding succeed or fail together. Across 12 tasks, 6 models from 3 families, and 4,032 directed cross-template pairs, we find the opposite. FV steering routinely succeeds where the logit lens cannot decode the correct answer at any intermediate layer, while the converse -- decodable without steerable -- is nearly empty (3 of 72). The gap is not representational dialect. A diagonal tuned lens closes 1 of 14 steerable-not-decodable cases; a 2-layer MLP probe with a Hewitt \& Liang control closes 5 of 10 via nonlinearly encoded structure but leaves 5 invisible to every decoder tested. Even at > 0.90 steering accuracy, projecting the FV through the unembedding yields incoherent token distributions: FVs encode computational instructions, not answer directions. A model-family asymmetry sharpens the picture. Mistral FVs rewrite intermediate representations, while Llama and Gemma FVs steer the final output without leaving a logit-lens-visible trace, corroborated by three signals (post-steering deltas, activation-patching recovery, FV norm-transfer correlations). A previously reported negative cosine-transfer correlation dissolves at scale, adding at most ΔR^2 = 0.011 beyond task identity. These results decompose the linear representation hypothesis into linear decodability and linear steerability and show they come apart opposite to intuition, with implications for safety monitoring: vocabulary-projection tools are blind to FV-style interventions on widely deployed model families.

  • 1 authors
·
May 7