Daily Papers

We present a boundary integral equation (BIE) framework for two-dimensional time-harmonic elastic transmission problems. Using the Helmholtz decomposition, the elastodynamic displacement fields are expressed in terms of scalar pressure and shear potentials, so that only the four classical Helmholtz boundary integral operators are needed. The key step is a rewriting of the Navier traction operator in the local normal--tangential frame of the interface, in which second-order normal derivatives are eliminated in favour of tangential derivatives and curvature terms. This leads to a one-parameter family of indirect combined field integral equations, depending on a coupling constant αne 0, which we prove to be uniquely solvable. The principal part of the resulting operator is, however, defective, and the discretized systems are severely ill-conditioned. Using the pseudodifferential calculus of the Helmholtz BIOs, we construct explicit left and right analytical preconditioners and prove that the preconditioned operator is a compact perturbation of the identity. Numerical experiments based on high-order Nyström discretizations confirm that the preconditioner clusters the spectrum: the number of GMRES iterations becomes independent of the discretization and is reduced by one order of magnitude or more, also in the high-frequency regime and for non-convex scatterers.

We investigate solutions to a coupled system of partial differential equations that describe a multilayered filtration system. Namely, we study the interaction of a viscous incompressible flow with bulk poroelasticity, via a poroelastic interface. The configuration consists of two 3D toroidal subdomains connected via a plate interface, which permits elastic deformation and perfusive fluid dynamics. The governing dynamics comprise Stokes equations in the bulk fluid region, Biot's equations in the bulk poroelastic region, and the recent poroplate of Mikelić at the interface. Coupling occurs on the top and lower surfaces of the plate, and involves conservation of mass, stress balance, and a certain slip condition for the fluid free-flow. We seek strong (and mild) solutions in the Hilbert space framework via the Lumer-Phillips theorem. The resolvent analysis employs a nonstandard mixed variational formulation which captures the complex, multi-physics coupling at the interface. We explicitly characterize the infinitesimal generator associated to the linear Cauchy problem and establish the generation of a C_0-semigroup on a suitably chosen finite-energy space. With the semigroup in hand, we may treat elastic nonlinearities for plate displacements through perturbation theory. These result parallel those for Biot-Stokes filtration systems, and complement the recently established weak solution theory for multilayer filtrations. The agency of the semigroup straightforwardly admits structural (plate) nonlinearity into the dynamics. Future stability and regularity analyses for multilayer filtrations are also made possible by these results, as well as a comparison of spectral and regularity properties between filtration configurations, and the elucidation of the mitigating poroplate dynamics as possibly regularizing and stabilizing.

In agentic scientific machine learning (SciML), large language model (LLM) agents can discover surrogate models and select one by an automated score, typically an error metric. A low error, however, does not establish that the predicted fields satisfy the physics that matter for mechanics, such as boundary conditions, superposition, stiffness scaling, or causality. We introduce Physics-Audited Agentic SciML (PA-SciML), a verification-first workflow for agentic SciML discovery. The workflow fixes a scoring evaluator before search, derives reviewable machine-checkable physics requirements, checks each trained candidate on its outputs, and separately searches prescribed input ranges or measured load-history spans for high-violation cases without reference solution fields. A surrogate is reported as verified only under the stated checks. When enabled, the workflow also adds advisory numerical probes before training and tests one modeling change at a time to record which isolated edits are associated with score gains before reuse. In the reported computational-solid-mechanics numerical examples, the static elasticity run selects a surrogate with lower validation error than the error-only baseline while both selected models pass the common linear-elastic checks. In the transient elastodynamics run, an error-only baseline with similar mean error fails a stricter causality check by responding to future parts of the loading history, while the selected surrogate passes the stated checks. The main distinction is per-candidate physics evidence on predicted fields, not a richer aggregate score.

Magnetic resonance elastography (MRE) is a noninvasive imaging modality for quantifying the viscoelastic properties of soft tissues from shear wave propagation. Recovering the complex-valued shear modulus from measured displacement fields leads to a severely ill-posed inverse problem, particularly in the presence of noise and limited boundary excitations. We investigate adjoint-based optimization, convolutional neural network (CNN) reconstruction, and a hybrid framework combining both approaches. The forward model is based on a scalar form of the modified stationary Stokes system with a complex shear modulus. We establish well-posedness of the forward problem, existence of minimizers, and first-order optimality conditions for the adjoint-based formulation, and implement a nonlinear conjugate-gradient method with Armijo line search. While PDE-constrained optimization can accurately refine coefficient reconstructions, its performance depends strongly on initialization. We therefore construct a two-dimensional CNN that maps complex-valued displacement measurements to spatially varying complex shear modulus fields and provides rapid, informative initial reconstructions. The proposed hybrid method uses the CNN reconstruction to initialize the adjoint-based optimization, yielding faster convergence and improved accuracy. The CNN is trained on coefficient fields containing individual perturbations and tested on both individual and previously unseen combined configurations. Numerical experiments demonstrate that the CNN generalizes to these more challenging configurations, while subsequent PDE-constrained optimization further refines the reconstructed coefficient. These results demonstrate the potential of combining data-driven initialization with physics-based optimization for efficient and accurate MRE reconstruction.

We present a novel formulation for mesh-free, reduced-order simulation of deformable hyperelastic objects. Existing work in reduced-order elastodynamic simulation represents the input geometry by either meshes, which can be difficult to obtain due to challenges in scanning and triangulating complex shapes, or by neural fields that require per-shape optimization. We propose to adopt a Reproducing Kernel Particle Method (RKPM) representation, which enables the construction of reduced-order skinning weights by solving a generalized eigensystem on the Hessian matrix of the elastic energy. We demonstrate that this formulation not only leads to a 40x training speedup compared with the per-shape optimization of neural fields, but also achieves lower simulation error when evaluated against the converged results of finite element method. We show our simulation results on a wide variety of objects in different representations including meshes and Gaussian splats, as well as the application of our method in the downstream task of robot simulation.

In this paper, we introduce tensor involved peridynamics, a unified framework for simulating both isotropic and anisotropic materials. While traditional peridynamics models effectively simulate isotropic materials, they face challenges with anisotropic materials and are prone to instability caused by zero energy modes. Our novel model extend the linear bond based peridynamics framework by incorporating the elastic tensor into the micrmodulus function, thereby ensuring stability for anisotropic materials without the need for additional corrections. For isotropic materials. the model mantains compatibility with conventional bond based peridynamics, assuming Possion's rations of 1/4 in 3D and 1/3 in 2D.Numerical experiments confirm the model's stability and accuracy across various scenarios. Additionally, we introduce a damage model for isotropic materials. validating its performance in predicting crack propagation paths in a 2D plate. The results show superior alignment with experimental date compared to traditional model.

We derive a thermodynamically-consistent model of fluid flow through a poroelastic medium. Starting from elastic and fluid free-energy densities, an energy-dissipation rate, and a kinematic constraint, the force-balance equations are derived using variational principles, with the pressure--density constitutive relation emerging as a direct consequence of the variational structure; the same kinematic constraint also supplies the total-flux transport structure. In the ideal-gas limit, the model linearization recovers the classical linear Biot equations. For power-law fluid energies, it yields isentropic pressure--density relations. A key advantage of the variational formulation is that extensions to richer physics, such as thermal effects, chemical reactions, or multi-component fluids, can be incorporated systematically by augmenting the energy and dissipation functionals without redesigning the force-balance or transport closure. We support the model with an energy-compatible two-field discretization and study consolidation under a surface load with three lateral-boundary treatments and three fluid-compressibility exponents.

The development of biophysical models for clinical applications is rapidly advancing in the research community, thanks to their predictive nature and their ability to assist the interpretation of clinical data. However, high-resolution and accurate multi-physics computational models are computationally expensive and their personalisation involves fine calibration of a large number of parameters, which may be space-dependent, challenging their clinical translation. In this work, we propose a new approach which relies on the combination of physics-informed neural networks (PINNs) with three-dimensional soft tissue nonlinear biomechanical models, capable of reconstructing displacement fields and estimating heterogeneous patient-specific biophysical properties. The proposed learning algorithm encodes information from a limited amount of displacement and, in some cases, strain data, that can be routinely acquired in the clinical setting, and combines it with the physics of the problem, represented by a mathematical model based on partial differential equations, to regularise the problem and improve its convergence properties. Several benchmarks are presented to show the accuracy and robustness of the proposed method and its great potential to enable the robust and effective identification of patient-specific, heterogeneous physical properties, s.a. tissue stiffness properties. In particular, we demonstrate the capability of the PINN to detect the presence, location and severity of scar tissue, which is beneficial to develop personalised simulation models for disease diagnosis, especially for cardiac applications.

In this work, we propose a framework that constructs reduced order models for nonlinear structural mechanics in a nonintrusive fashion, and can handle large scale simulations. We identify three steps that are carried out separately in time, and possibly on different devices: (i) the production of high-fidelity solutions by a commercial software, (ii) the offline stage of the model reduction and (iii) the online stage where the reduced order model is exploited. The nonintrusivity assumes that only the displacement field solution is known, and relies on operations on simulation data during the offline phase by using an in-house code. The compatibility with a new commercial code only needs the implementation of a routine converting the mesh and result format into our in-house data format. The nonintrusive capabilities of the framework are demonstrated on numerical experiments using commercial versions of the finite element softwares Zset and Ansys Mechanical. The nonlinear constitutive equations are evaluated by using the same external plugins as for Zset or Ansys Mechanical. The large scale simulations are handled using domain decomposition and parallel computing with distributed memory. The features and performances of the framework are evaluated on two numerical applications involving elastoviscoplastic materials: the second one involves a model of high-pressure blade, where the framework is used to extrapolate cyclic loadings in 6.5 hours, whereas the reference high-fidelity computation would take 9.5 days.

A cumulative variational framework for solid deformation is proposed. Its central organizing principle is the recursive combination of three structural components of one material body: a compatible Cosserat component, a distributed-incompatibility component, and a defect-source component. At any prescribed external condition these components constitute a combined material state. They are governed under common physical boundary and initial conditions and are coupled through one cumulative energy and the associated field equations. They are not separate boundary-value problems and need not appear in a prescribed temporal sequence. The cumulative character of the framework concerns the response of the combined state to variation of externally prescribed conditions. For the special case of an initially perfect body, loss of stability may produce successive branches with defect and then source participation. Such a sequence is a bifurcation property of the selected initial state and constitutive energy, rather than a defining hierarchy of the framework. A one-dimensional specialization illustrates structural bifurcation, residual deformation and residual stress produced by retained structure, dependence on the initial combined state, directional memory under reverse loading, parametric cumulative hysteresis, and changes of observable tangent stiffness associated with structural stabilization. A spatial extension introduces defect and source gradient terms and yields a size-dependent structural stability operator. For the stable quartic energy considered, the gradient terms regularize nonuniform perturbations but do not by themselves generate a finite-wavelength localization instability on an already stable three-component branch. The examples thereby distinguish consequences of the cumulative structure and energy from phenomena requiring additional constitutive evolution laws.

The elastic response of mechanical, chemical, and biological systems is often modeled using a discrete arrangement of Hookean springs, either representing finite material elements or even the molecular bonds of a system. However, to date, there is no direct derivation of the relation between a general discrete spring network, with arbitrary geometry, and it's corresponding elastic continuum. Furthermore, understanding the network's mechanical response requires simulations that may be expensive computationally. Here we report a method to derive the exact elastic continuum model of any discrete network of springs, requiring network geometry and topology only. We identify and calculate the so-called "non-affine" displacements. Explicit comparison of our calculations to simulations of different crystalline and disordered configurations, shows we successfully capture the mechanics even of auxetic materials. Our method is valid for residually stressed systems with non-trivial geometries, and is an essential step in generalizing active stresses on such discrete systems. It is easily generalizable to other discrete models, and opens the possibility of a rational design of elastic systems.

This work puts forth a new optimal design formulation for planar elastic membranes. The goal is to minimize the membrane's compliance through choosing the material distribution described by a positive Radon measure. The deformation of the membrane itself is governed by the convexified F\"{o}ppl's model. The uniqueness of this model lies in the convexity of its variational formulation despite the inherent nonlinearity of the strain-displacement relation. It makes it possible to rewrite the optimization problem as a pair of mutually dual convex variational problems. In the primal problem a linear functional is maximized with respect to displacement functions while enforcing that point-wisely the strain lies in an unbounded closed convex set. The dual problem consists in finding equilibrated stresses that are to minimize a convex integral functional of linear growth defined on the space of Radon measures. The pair of problems is analysed: existence and regularity results are provided, together with the system of optimality criteria. To demonstrate the computational potential of the pair, a finite element scheme is developed around it. Upon reformulation to a conic-quadratic & semi-definite programming problem, the method is employed to produce numerical simulations for several load case scenarios.

In this paper, we propose a { P_{1}^{c}}RT0-P0 discretization of the Stokes equations on general simplicial meshes in two/three dimensions (2D/3D), which yields an exactly divergence-free and pressure-independent velocity approximation with optimal order. Our method has the following features. Firstly, the global number of the degrees of freedom of our method is the same as the low order Bernardi and Raugel (B-R) finite element method (Bernardi and Raugel, 1985), while the number of {the non-zero entries} of the former is about half of the latter in the velocity-velocity region of the coefficient matrix. Secondly, the { P_{1}^{c}} component of the velocity, the RT0 component of the velocity and the pressure seem to solve a popular { P_{1}^{c}}-{RT0}-P0 discretization of a poroelastic-type system formally. Finally, our method can be easily transformed into a pressure-robust and stabilized { P_{1}^{c}}-P0 discretization for the Stokes problem via the static condensation of the RT0 component, which has a much smaller number of global degrees of freedom. Numerical experiments illustrating the robustness of our method are also provided.

We consider the matrix composite materials (CM) of either random (statistically homogeneous or inhomogeneous), periodic, or deterministic (neither random nor periodic) structures. CMs exhibit linear or nonlinear behavior, coupled or uncoupled multi-physical phenomena, locally elastic, weakly nonlocal (strain gradient and stress gradient), or strongly nonlocal (strain-type and displacement-type, peridynamics) phase properties. A modified Computational Analytical Micromechanics (CAM) approach introduces an exact Additive General Integral Equation (AGIE) for CMs of any structure and phase properties mentioned above. The unified iteration solution of static AGIEs is adapted to the body force with compact support serving as a fundamentally new universal training parameter. The approach also establishes a critical threshold for filtering out unsuitable sub-datasets of effective parameters through a novel Representative Volume Element (RVE) concept, which extends Hill's classical framework. This RVE concept eliminates sample size, boundary layer, and edge effects, making it applicable to CMs of any structure and phase properties, regardless of local or nonlocal, linear or nonlinear. Incorporating this new RVE concept into machine learning and neural network techniques enables the construction of any unpredefined surrogate nonlocal operators. The methodology is structured as a modular, block-based framework, allowing independent development and refinement of software components. This flexible, robust AGIE-CAM framework integrates data-driven, multi-scale, and multi-physics modeling, accelerating research in CM of any microtopology and phase properties considered. The AGIE-CAM framework represents a groundbreaking paradigm shift in the micromechanics of composites, redefining the very philosophy that underpins our understanding of their behavior at the microscopic level.

Materials that undergo internal transformations are usually described in solid mechanics by multi-well energy functions that account for both elastic and transformational behavior. In order to separate the two effects, physicists use instead phase-field-type theories where conventional linear elastic strain is quadratically coupled to an additional field that describes the evolution of the reference state and solely accounts for nonlinearity. In this paper we propose a systematic method allowing one to split the non-convex energy into harmonic and nonharmonic parts and to convert a nonconvex mechanical problem into a partially linearized phase-field problem. The main ideas are illustrated using the simplest framework of the Peierls-Nabarro dislocation model.

This paper establishes Lipschitz stability for the simultaneous recovery of a variable density coefficient and the initial displacement in a damped biharmonic wave equation. The data consist of the boundary Cauchy data for the Laplacian of the solution, \(Δu |_{\partial Ω}\) and \( \partial_{n}(Δu)|_{\partial Ω}.\) We first prove that the associated system operator generates a contraction semigroup, which ensures the well-posedness of the forward problem. A key observability inequality is then derived via multiplier techniques. Building on this foundation, explicit stability estimates for the inverse problem are obtained. These estimates demonstrate that the biharmonic structure inherently enhances the stability of parameter identification, with the stability constants exhibiting an explicit dependence on the damping coefficient via the factor \( (1 + γ)^{1/2} \). This work provides a rigorous theoretical basis for applications in non-destructive testing and dynamic inversion.

The precision, stability, and performance of lightweight high-strength steel structures in heavy machinery is affected by their highly nonlinear dynamics. This, in turn, makes control more difficult, simulation more computationally intensive, and achieving real-time autonomy, using standard approaches, impossible. Machine learning through data-driven, physics-informed and physics-inspired networks, however, promises more computationally efficient and accurate solutions to nonlinear dynamic problems. This study proposes a novel framework that has been developed to estimate real-time structural deflection in hydraulically actuated three-dimensional systems. It is based on SLIDE, a machine-learning-based method to estimate dynamic responses of mechanical systems subjected to forced excitations.~Further, an algorithm is introduced for the data acquisition from a hydraulically actuated system using randomized initial configurations and hydraulic pressures.~The new framework was tested on a hydraulically actuated flexible boom with various sensor combinations and lifting various payloads. The neural network was successfully trained in less time using standard parameters from PyTorch, ADAM optimizer, the various sensor inputs, and minimal output data. The SLIDE-trained neural network accelerated deflection estimation solutions by a factor of 10^7 in reference to flexible multibody simulation batches and provided reasonable accuracy. These results support the studies goal of providing robust, real-time solutions for control, robotic manipulators, structural health monitoring, and automation problems.

Modelling physical systems with partial differential equations (PDEs) is central to science and engineering, yet in most real applications the PDE model is incomplete: relationships such as constitutive or thermal laws are unknown. Existing surrogate approaches close this gap by learning the PDE solution from data, but remain tied to a specific configuration (geometry, boundary conditions, discretisation) and recover the solution rather than the missing physics itself. We introduce FEML, an end-to-end differentiable framework that couples the known PDE with a machine-learned operator for the missing physics. Embedding the PDE solver into training lets this operator be learned directly from the PDE solution, even when its own output cannot be measured - for example, stress in constitutive laws. Because the operator is independent of the system configuration, a law learned in one setting transfers zero-shot to new geometries, boundary conditions, and discretisations, and can be inspected by domain specialists. FEML represents the operator with structure-preserving operator networks (SPONs), which retain key continuous properties at the discrete level. We demonstrate FEML across solid mechanics and thermal transport. From synthetic data we progressively discover an elastoplastic law - the nonlinear elastic response, then the plastic hardening law - and compose them into a foundation constitutive model that transfers zero-shot to a 3D torsion problem. Moving to real data, we learn coupled plastic-hardening and ductile-damage laws from a benchmark shear-coupon test, reproducing the measured response, including post-peak softening, to within the experimental scatter. Finally, we recover a temperature-dependent conductivity from transient heat-flow data and apply symbolic regression to the learned operator to extract a closed-form law matching the ground truth.

Earthquake hazard analysis and design of spatially distributed infrastructure, such as power grids and energy pipeline networks, require scenario-specific ground-motion time histories with realistic frequency content and spatiotemporal coherence. However, producing the large ensembles needed for uncertainty quantification with physics-based simulations is computationally intensive and impractical for engineering workflows. To address this challenge, we introduce Ground-Motion Flow (GMFlow), a physics-inspired latent operator flow matching framework that generates realistic, large-scale regional ground-motion time-histories conditioned on physical parameters. Validated on simulated earthquake scenarios in the San Francisco Bay Area, GMFlow generates spatially coherent ground motion across more than 9 million grid points in seconds, achieving a 10,000-fold speedup over the simulation workflow, which opens a path toward rapid and uncertainty-aware hazard assessment for distributed infrastructure. More broadly, GMFlow advances mesh-agnostic functional generative modeling and could potentially be extended to the synthesis of large-scale spatiotemporal physical fields in diverse scientific domains.

The Helmholtz equation governs time-harmonic wave propagation, and in dissipative media a complex modulus renders its squared wavenumber κ^2 complex. Inferring such fields from sparse, noisy data calls for solvers that also quantify their own uncertainty. Physics-informed Gaussian-process (GP) regression supplies this by returning a posterior over the solution, yet operator-conditioned formulations have been developed almost exclusively for real-valued fields. We extend operator-informed GP regression to complex-valued Helmholtz problems by realifying the complex operator into an equivalent coupled real block, which enables inference with standard real-valued GP conditioning. The construction admits a family of priors, from a proper diagonal prior to coregionalized and multiscale variants, and conditions on PDE residuals and boundary traces. On benchmark problems in one to three dimensions, the solver is competitive with finite-difference and neural-network baselines at a far smaller interior-constraint budget. Unlike those deterministic baselines, it returns a posterior over the complex wavefield rather than a point estimate. Applied to in vivo brain magnetic resonance elastography, a proper multiscale prior reconstructs the shear curl field to a correlation of 0.77 with measurement, above a 0.75 target. The gain arises from the multiscale kernel rather than from real--imaginary coupling. We further identify a low-frequency accuracy ceiling set by model mismatch and a posterior uncertainty that is not yet calibrated. Calibrated uncertainty therefore emerges as the central next step for probabilistic wavefield inference in dissipative media.

We consider the dictionary-based ROM-net (Reduced Order Model) framework [T. Daniel, F. Casenave, N. Akkari, D. Ryckelynck, Model order reduction assisted by deep neural networks (ROM-net), Advanced modeling and Simulation in Engineering Sciences 7 (16), 2020] and summarize the underlying methodologies and their recent improvements. The main contribution of this work is the application of the complete workflow to a real-life industrial model of an elastoviscoplastic high-pressure turbine blade subjected to thermal, centrifugal and pressure loadings, for the quantification of the uncertainty on dual quantities (such as the accumulated plastic strain and the stress tensor), generated by the uncertainty on the temperature loading field. The dictionary-based ROM-net computes predictions of dual quantities of interest for 1008 Monte Carlo draws of the temperature loading field in 2 hours and 48 minutes, which corresponds to a speedup greater than 600 with respect to a reference parallel solver using domain decomposition, with a relative error in the order of 2%. Another contribution of this work consists in the derivation of a meta-model to reconstruct the dual quantities of interest over the complete mesh from their values on the reduced integration points.

This paper concerns the derivation of radiative transfer equations for acoustic waves propagating in a randomly fluctuating slab (between two parallel planes) in the weak-scattering regime, and the study of boundary effects through an asymptotic analysis of the Wigner transform of the wave solution. These radiative transfer equations allow to model the transport of wave energy density, taking into account the scattering by random heterogeneities. The approach builds on the method of images, where the slab is extended to a full-space, with a periodic map of mechanical properties and a series of sources located along a periodic pattern. Two types of boundary effects, both on the (small) scale of the wavelength, are observed: one at the boundaries of the slab, and one inside the domain. The former impact the entire energy density (coherent as well as incoherent) and is also observed in half-spaces. The latter, more specific to slabs, corresponds to the constructive interference of waves that have reflected at least twice on the boundaries of the slab and only impacts the coherent part of the energy density.

We introduce DIFFTACTILE, a physics-based differentiable tactile simulation system designed to enhance robotic manipulation with dense and physically accurate tactile feedback. In contrast to prior tactile simulators which primarily focus on manipulating rigid bodies and often rely on simplified approximations to model stress and deformations of materials in contact, DIFFTACTILE emphasizes physics-based contact modeling with high fidelity, supporting simulations of diverse contact modes and interactions with objects possessing a wide range of material properties. Our system incorporates several key components, including a Finite Element Method (FEM)-based soft body model for simulating the sensing elastomer, a multi-material simulator for modeling diverse object types (such as elastic, elastoplastic, cables) under manipulation, a penalty-based contact model for handling contact dynamics. The differentiable nature of our system facilitates gradient-based optimization for both 1) refining physical properties in simulation using real-world data, hence narrowing the sim-to-real gap and 2) efficient learning of tactile-assisted grasping and contact-rich manipulation skills. Additionally, we introduce a method to infer the optical response of our tactile sensor to contact using an efficient pixel-based neural module. We anticipate that DIFFTACTILE will serve as a useful platform for studying contact-rich manipulations, leveraging the benefits of dense tactile feedback and differentiable physics. Code and supplementary materials are available at the project website https://difftactile.github.io/.

In this work, we investigate the transient rheological behavior of two soft glassy materials: a clay dispersion and a silica gel, emphasizing their unconventional shear stress build-up behavior under conditions of constant imposed strain. For both materials, the elastic modulus and static yield stress undergo time-dependent evolution or aging. In addition, following an intense period of pre-shearing (i.e. shear-melting or destructuration), the material relaxation time is observed to show a stronger than linear dependence on the sample age, suggestive of hyper-aging dynamics. We show that these features are consistent with non-monotonic steady-state shear stress/shear rate flow curves characterized by a local stress minimum. When a steady shear flow is suddenly ceased, and the total imposed sample strain is held constant, both materials show an initial relaxation of the shear stress followed by a period of shear stress buildup, resulting in a local minimum in the evolution of shear stress with time. For the clay dispersion, the intensity of these effects increases with higher pre-shear rates, whereas for the silica gel, the effects are largely independent of the pre-shear rate. We also propose a simple time-dependent linear Maxwell model, which qualitatively predicts the experimentally observed trends in which the shear stress build-up is directly related to a monotonic increase in the elastic modulus, giving keen insight into this peculiar phenomenon.

Structural vibrations are a source of unwanted noise in engineering systems like cars, trains or airplanes. Minimizing these vibrations is crucial for improving passenger comfort. This work presents a novel design optimization approach based on guided flow matching for reducing vibrations by placing beadings (indentations) in plate-like structures. Our method integrates a generative flow matching model and a surrogate model trained to predict structural vibrations. During the generation process, the flow matching model pushes towards manufacturability while the surrogate model pushes to low-vibration solutions. The flow matching model and its training data implicitly define the design space, enabling a broader exploration of potential solutions as no optimization of manually-defined design parameters is required. We apply our method to a range of differentiable optimization objectives, including direct optimization of specific eigenfrequencies through careful construction of the objective function. Results demonstrate that our method generates diverse and manufacturable plate designs with reduced structural vibrations compared to designs from random search, a criterion-based design heuristic and genetic optimization. The code and data are available from https://github.com/ecker-lab/Optimizing_Vibrating_Plates.

In this paper, we revisit the joint low-Mach and low-Frode number limit for the compressible Navier-Stokes equations with degenerate, density-dependent viscosity. Employing the relative entropy framework based on the concept of κ-entropy, we rigorously justify the convergence of weak solutions toward the generalized anelastic system in a three-dimensional periodic domain for well-prepared initial data. For general ill-prepared initial data, we establish a similar convergence result in the whole space, relying essentially on dispersive estimates for acoustic waves. Compared with the work of Fanelli and Zatorska [Commun. Math. Phys., 400 (2023), pp. 1463-1506], our analysis is conducted for the standard isentropic pressure law, thereby eliminating the need for the cold pressure term that played a crucial role in the previous approach. To the best of our knowledge, this is the first rigorous singular limit result for the compressible Navier-Stokes equations with degenerate viscosity that requires no additional regularization of the system.

Learning spatial-temporal correspondences in cardiac motion from images is important for understanding the underlying dynamics of cardiac anatomical structures. Many methods explicitly impose smoothness constraints such as the L_2 norm on the displacement vector field (DVF), while usually ignoring biomechanical feasibility in the transformation. Other geometric constraints either regularize specific regions of interest such as imposing incompressibility on the myocardium or introduce additional steps such as training a separate network-based regularizer on physically simulated datasets. In this work, we propose an explicit biomechanics-informed prior as regularization on the predicted DVF in modeling a more generic biomechanically plausible transformation within all cardiac structures without introducing additional training complexity. We validate our methods on two publicly available datasets in the context of 2D MRI data and perform extensive experiments to illustrate the effectiveness and robustness of our proposed methods compared to other competing regularization schemes. Our proposed methods better preserve biomechanical properties by visual assessment and show advantages in segmentation performance using quantitative evaluation metrics. The code is publicly available at https://github.com/Voldemort108X/bioinformed_reg.

Biological tissues exhibit complex behaviors with their dynamics often resembling inert soft matter such as liquids, polymers, colloids, and liquid crystals. These analogies enable physics-based approaches for investigations of emergent behaviors in biological processes. A well-studied case is the spreading of cellular aggregates on solid surfaces, where they display dynamics similar to viscous droplets. In vivo, however, cells and tissues are in a confined environment with varying geometries and mechanical properties to which they need to adapt. In this work, we compressed cellular aggregates between two solid surfaces and studied their dynamics using microscopy, and computer simulations. The confined cellular aggregates transitioned from compressed spheres into dynamic living capillary bridges exhibiting bridge thinning and a convex-to-concave meniscus curvature transition. We found that the stability of the bridge is determined by the interplay between cell growth and cell spreading on the confining surfaces. This interaction leads to bridge rupture at a critical length scale determined by the distance between the plates. The force distributions, formation and stability regimes of the living capillary bridges were characterized with full 3D computer simulations that included cell division, migration and growth dynamics, directly showing how mechanical principles govern the behavior of the living bridges; cellular aggregates display jamming and stiffening analogously to granular matter, and cell division along the long axis enhances thinning. Based on our results, we propose a new class of active soft matter behavior, where cellular aggregates exhibit liquid-like adaptation to confinement, but with self-organized rupturing driven by biological activity.

We construct an odd smooth initial density for the unforced incompressible porous media (IPM) equation on mathbb T^2 whose solution develops a finite-time blowup. The components partial_{x_2}ρ(t,0) and partial_{x_1}u_1(t,0) tend to +infty as the maximal smooth existence time is approached, while the density and velocity remain bounded in L^2. Starting from a stationary solution, we iterate the angular amplification of localized oscillations with rapidly growing frequencies, adapting the mechanism of Córdoba and Martínez-Zoroa [7] for forced IPM. Each perturbation is constructed from time zero and creates the geometry configuration for the next iteration stage. A one-sided upper bound for the pressure Hessian is applied to control backward preparation and initial perturbations, following an idea from the Euler construction of OpenAI [14].

A finite difference scheme is used to develop a numerical method to solve the flow of an unbounded viscoelastic fluid with zero to moderate inertia around a prolate spheroidal particle. The equations are written in prolate spheroidal coordinates, and the shape of the particle is exactly resolved as one of the coordinate surfaces representing the inner boundary of the computational domain. As the prolate spheroidal grid is naturally clustered near the particle surface, good resolution is obtained in the regions where the gradients of relevant flow variables are most significant. This coordinate system also allows large domain sizes with a reasonable number of mesh points to simulate unbounded fluid around a particle. Changing the aspect ratio of the inner computational boundary enables simulations of different particle shapes ranging from a sphere to a slender fiber. Numerical studies of the latter particle shape allow testing of slender body theories. The mass and momentum equations are solved with a Schur complement approach allowing us to solve the zero inertia case necessary to isolate the viscoelastic effects. The singularities associated with the coordinate system are overcome using L'Hopital's rule. A straightforward imposition of conditions representing a time-varying combination of linear flows on the outer boundary allows us to study various flows with the same computational domain geometry. {For the special but important case of zero fluid and particle inertia we obtain a novel formulation that satisfies the force- and torque-free constraint in an iteration-free manner.} The numerical method is demonstrated for various flows of Newtonian and viscoelastic fluids around spheres and spheroids (including those with large aspect ratio). Good agreement is demonstrated with existing theoretical and numerical results.

This study explores cardiovascular stents fabricated using laser powder bed fusion (LPBF); an emerging method to offer patient-specific customisable parts. Here, the shape memory alloy NiTi, in a near equiatomic composition, was investigated to deconvolve the material response from macroscopic component effects. Specifically, stress-geometry interactions were revealed, in-situ, for a minaturised cardiovascular stent subjected to an externally applied cylindrical stress whilst acquiring synchrotron X-ray imaging and diffraction data. The approach enabled the collection of spatially resolved micromechanical deformation data; the formation of stress-induced martensite and R-phase was evident, occurring in locations near junctions between stent ligaments where stress concentrations exist. In the as-fabricated condition, hardness maps were obtained through nanoindentation, demonstrating that the localised deformation and deformation patterning is further controlled by porosity and microstructural heterogeneity. Electron backscatter diffraction (EBSD) supported these observations, showing a finer grain structure near stent junctions with higher associated lattice curvature. These features, combined with stress concentrations when loaded will initiate localised phase transformations. If the stent was subjected to repeated loading, representing in-vivo conditions, these regions would be susceptible to cyclic damage through transformation memory loss, leading to premature component failure. This study highlights the challenges that must be addressed for the post-processing treatment of LABF-processed stents for healthcare-related applications.

We consider the scattering of acoustic perturbations in a presence of a flow. We suppose that the space can be split into a zone where the flow is uniform and a zone where the flow is potential. In the first zone, we apply a Prandtl-Glauert transformation to recover the Helmholtz equation. The well-known setting of boundary element method for the Helmholtz equation is available. In the second zone, the flow quantities are space dependent, we have to consider a local resolution, namely the finite element method. Herein, we carry out the coupling of these two methods and present various applications and validation test cases. The source term is given through the decomposition of an incident acoustic field on a section of the computational domain's boundary.

Flow matching generates data by integrating a learned velocity field, where the number of integration steps (NFE) directly determines inference cost. We analyze which properties of the velocity field govern integration error by decomposing the velocity Jacobian into its symmetric part S (strain rate) and antisymmetric part Omega (vorticity). We prove that strain and vorticity play different roles: strain controls exponential error amplification through the logarithmic norm, while vorticity contributes only linearly to the local truncation error. We further show that the optimal transport velocity field is irrotational and has zero material derivative, implying second-order Euler accuracy; for exact displacement interpolation, the associated Lagrangian particle dynamics are integrated exactly by Euler. Motivated by this analysis, we study weighted Jacobian regularization with strain weight alpha and vorticity weight beta. Experiments on 2D synthetic data confirm the main theoretical predictions, showing up to 2.7x lower integration error at NFE=5. Preliminary CIFAR-10 experiments show consistent trends, with a lightweight fine-tuning procedure improving FID by 14 percent at NFE=10 while preserving high-NFE quality.

Layered viscoelastic interiors control the frequency dependence of planetary tidal dissipation, but repeated layered Love-number calculations are expensive in long-term orbital and spin integrations. Equivalent homogeneous rheologies provide a cheaper representation of the same response, but their effective parameters do not by themselves identify the interior layers they represent. We develop a local interpretation of such parameters by differentiating the layered-to-homogeneous construction about a fixed-geometry baseline, perturbing only selected layer rigidities and viscosities. We use the pole-residue representation of the degree-two Love number to construct a physical-to-effective transfer matrix. We then use its singular values, resolution matrix, and mode-dominance matrix to determine which physical perturbations are visible in the Love-number response and how they appear in effective-rheology coordinates. Applied to a five-layer lunar model, the full degree-two response is sensitive to seven of eight solid-layer rheological parameters. The single near-null direction is the inner-core rigidity, consistent with shielding by the fluid outer core and with the weak dependence of Love numbers on core elastic structure. Over the LLR frequency interval, fewer physical directions are visible. To first order, the elastic spring, isolated dashpot, and two Voigt elements reproduce the nine-pole response over this interval. Finite perturbations confirm the tangent prediction to within a few percent, with the validity radius limited by a nearly degenerate pair of long-timescale modes.

Directed energy deposition (DED) produces complex thermo-mechanical responses that can lead to distortion and reduced dimensional accuracy of a manufactured part. Thermo-mechanical finite element simulations are widely used to estimate these effects, but their computational cost and the complexity of accurately capturing DED physics limit their use in design iteration and process optimization. This paper introduces FLARE (Field Prediction via Linear Affine Reconstruction in wEight-space), a data-efficient surrogate modeling framework for predicting post-cooling displacement fields in DED from geometric and process parameters. We develop a predefined-geometry DED simulation workflow using an open-source finite element framework and generate a dataset of simulations with varying geometry, laser power, and deposition velocity. Each simulation provides full-field displacement, stress, strain, and temperature data throughout the manufacturing process. FLARE encodes each simulation as an implicit neural field and regularizes the corresponding neural-network weights so that they follow the affine structure of the input parameter space. This enables prediction of unseen parameter combinations by reconstructing network weights through affine mixing of training examples. On this DED benchmark, the method shows improved accuracy compared to baseline methods in both in-distribution and extrapolation settings. Although the present study focuses on DED displacement prediction, the proposed affine weight-space reconstruction framework offers a promising approach for data-efficient surrogate modeling of physical fields.

We theoretically investigate electronic responses to lattice deformation in a ferroaxial system using a tight-binding model on a two-dimensional square lattice and linear response theory. While conventional elastic responses are commonly discussed in terms of symmetric strain, the displacement gradient also contains an antisymmetric component describing a local lattice rotation. Focusing on this rotational degree of freedom, we treat the symmetric strain and antisymmetric local rotation as independent perturbations and incorporate their effects microscopically through deformation-induced modulations of the electronic hopping amplitudes. We find that the local rotation induces characteristic diagonal electric quadrupoles that are distinct from those generated by the symmetric shear strain. The rotation-induced response is dominated by the intraband contribution and increases approximately linearly with the ferroaxial crystal field, vanishing in the absence of ferroaxial order. In contrast, the symmetric-shear-induced response remains finite without ferroaxial order and contains both intraband and interband contributions. These results demonstrate that the antisymmetric local rotation provides a distinct electronic response channel characteristic of the ferroaxial state.

Recent flow cessation experiments on soft materials have shown a counter-intuitive non-monotonic relaxation of the shear stress: following the switch-off of a steady imposed shear flow, the stress initially decays before later increasing again. By simulating the soft glassy rheology model in a form extended to allow steady state shear banding, we show that the presence of shear bands prior to flow cessation can give rise to this phenomenon. We give a mechanistic understanding of the basic physics involved, in terms of (i) the decay of the shear bands after flow cessation, and (ii) the evolution of frustrated local stresses, governed by different time scales for plastic relaxation in each band. In particular, an elastic recoil in the unsheared band gives rise to negative local frustrated stresses, the slow release of which can cause an increase in macroscopic stress. Given that shear banding and frustrated local stresses arise widely across disordered soft solids, we argue that non-monotonic stress relaxation after flow cessation may occur in many different materials.

Forecasting seismic waveforms beyond observed data remains challenging due to the nonlinear, dispersive, and multi-scale nature of seismic wave propagation. In this work, we introduce SeismoGPT, a transformer-based autoregressive model designed to forecast three-component seismic waveforms directly in the time domain. Forecasting is formulated as a physically constrained continuation problem in which the model receives waveform context beginning at the P-wave arrival and extending a defined time beyond the S-wave arrival, after which future motion is generated recursively without access to ground-truth samples. Evaluation is performed on synthetic seismograms spanning source depths of 5--100\,km, epicentral distances of 10--90^circ, and magnitudes 3 leq M_w leq 7. To disentangle the effects of context length and prediction horizon, we define three evaluation configurations using a distance-normalized context ratio and fixed prediction horizons of 120 and 240\,s. Across all configurations, the model achieves median normalized cross correlation above 0.93. Analysis of representative forecasts shows that successful predictions preserve both phase coherence and spectral energy distribution. Where failure cases arise, this is primarily due to gradual phase drift during autoregressive rollout rather than unphysical signal generation. These results demonstrate that transformer-based sequence models can learn stable dynamical continuation of seismic wavefields, highlighting the potential of foundation-model approaches for physics-driven time-series forecasting. There are potential applications of this methodology in seismic warning and hazard mitigation, particularly for next-generation gravitational-wave observatories, such as the Einstein Telescope.

As the number of seismic sensors grows, it is becoming increasingly difficult for analysts to pick seismic phases manually and comprehensively, yet such efforts are fundamental to earthquake monitoring. Despite years of improvements in automatic phase picking, it is difficult to match the performance of experienced analysts. A more subtle issue is that different seismic analysts may pick phases differently, which can introduce bias into earthquake locations. We present a deep-neural-network-based arrival-time picking method called "PhaseNet" that picks the arrival times of both P and S waves. Deep neural networks have recently made rapid progress in feature learning, and with sufficient training, have achieved super-human performance in many applications. PhaseNet uses three-component seismic waveforms as input and generates probability distributions of P arrivals, S arrivals, and noise as output. We engineer PhaseNet such that peaks in probability provide accurate arrival times for both P and S waves, and have the potential to increase the number of S-wave observations dramatically over what is currently available. This will enable both improved locations and improved shear wave velocity models. PhaseNet is trained on the prodigious available data set provided by analyst-labeled P and S arrival times from the Northern California Earthquake Data Center. The dataset we use contains more than seven million waveform samples extracted from over thirty years of earthquake recordings. We demonstrate that PhaseNet achieves much higher picking accuracy and recall rate than existing methods.

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

Distributed Acoustic Sensing (DAS) is an emerging technology for earthquake monitoring and subsurface imaging. The recorded seismic signals by DAS have several distinct characteristics, such as unknown coupling effects, strong anthropogenic noise, and ultra-dense spatial sampling. These aspects differ from conventional seismic data recorded by seismic networks, making it challenging to utilize DAS at present for seismic monitoring. New data analysis algorithms are needed to extract useful information from DAS data. Previous studies on conventional seismic data demonstrated that deep learning models could achieve performance close to human analysts in picking seismic phases. However, phase picking on DAS data is still a difficult problem due to the lack of manual labels. Further, the differences in mathematical structure between these two data formats, i.e., ultra-dense DAS arrays and sparse seismic networks, make model fine-tuning or transfer learning difficult to implement on DAS data. In this work, we design a new approach using semi-supervised learning to solve the phase-picking task on DAS arrays. We use a pre-trained PhaseNet model as a teacher network to generate noisy labels of P and S arrivals on DAS data and apply the Gaussian mixture model phase association (GaMMA) method to refine these noisy labels to build training datasets. We develop a new deep learning model, PhaseNet-DAS, to process the 2D spatial-temporal data of DAS arrays and train the model on DAS data. The new deep learning model achieves high picking accuracy and good earthquake detection performance. We then apply the model to process continuous data and build earthquake catalogs directly from DAS recording. Our approach using semi-supervised learning provides a way to build effective deep learning models for DAS, which have the potential to improve earthquake monitoring using large-scale fiber networks.

Elastic geophysical properties (such as P- and S-wave velocities) are of great importance to various subsurface applications like CO_2 sequestration and energy exploration (e.g., hydrogen and geothermal). Elastic full waveform inversion (FWI) is widely applied for characterizing reservoir properties. In this paper, we introduce mathbb{E^{FWI}}, a comprehensive benchmark dataset that is specifically designed for elastic FWI. mathbb{E^{FWI}} encompasses 8 distinct datasets that cover diverse subsurface geologic structures (flat, curve, faults, etc). The benchmark results produced by three different deep learning methods are provided. In contrast to our previously presented dataset (pressure recordings) for acoustic FWI (referred to as OpenFWI), the seismic dataset in mathbb{E^{FWI}} has both vertical and horizontal components. Moreover, the velocity maps in mathbb{E^{FWI}} incorporate both P- and S-wave velocities. While the multicomponent data and the added S-wave velocity make the data more realistic, more challenges are introduced regarding the convergence and computational cost of the inversion. We conduct comprehensive numerical experiments to explore the relationship between P-wave and S-wave velocities in seismic data. The relation between P- and S-wave velocities provides crucial insights into the subsurface properties such as lithology, porosity, fluid content, etc. We anticipate that mathbb{E^{FWI}} will facilitate future research on multiparameter inversions and stimulate endeavors in several critical research topics of carbon-zero and new energy exploration. All datasets, codes and relevant information can be accessed through our website at https://efwi-lanl.github.io/

Large language model (LLM)-based agentic frameworks increasingly adopt the paradigm of dynamically generating task-specific agents. We suggest that not only agents but also specialized software modules for scientific and engineering tasks can be generated on demand. We demonstrate this concept in the field of solid mechanics. There, so-called constitutive models are required to describe the relationship between mechanical stress and body deformation. Constitutive models are essential for both the scientific understanding and industrial application of materials. However, even recent data-driven methods of constitutive modeling, such as constitutive artificial neural networks (CANNs), still require substantial expert knowledge and human labor. We present a framework in which an LLM generates a CANN on demand, tailored to a given material class and dataset provided by the user. The framework covers LLM-based architecture selection, integration of physical constraints, and complete code generation. Evaluation on three benchmark problems demonstrates that LLM-generated CANNs achieve accuracy comparable to or greater than manually engineered counterparts, while also exhibiting reliable generalization to unseen loading scenarios and extrapolation to large deformations. These findings indicate that LLM-based generation of physics-constrained neural networks can substantially reduce the expertise required for constitutive modeling and represent a step toward practical end-to-end automation.

We show that Hertzian particle contacts are the underlying cause of the as-yet-unexplained noninteger power laws in weakly nonlinear rheology. In the medium amplitude oscillatory shear (MAOS) region, the cubic scaling of the leading order nonlinear shear stress (σ_3 sim γ_0^{m_3}, m_3=3) is the standard expectation. Expanding on the work by Natalia et al. [J. Rheol. 64 625-635 (2020)], we report an extensive data set of noncubical, noninteger power law scalings m_3 for particle suspensions in two immiscible fluids with a capillary attractive interaction, known as capillary suspensions. Here, we show that distinct power law exponents are found for the storage and loss moduli and these noninteger scalings occur at every secondary fluid concentration for two different contact angles. These compelling results indicate that the noninteger scalings are related to the underlying microstructure of capillary suspensions. We show that the magnitude of the third harmonic elastic stress scaling m_3,elastic originates from Hertzian-like contacts in combination with the attractive capillary force. The related third harmonic viscous stress scaling m_3,viscous is, found to be associated with adhesive-controlled friction. These observations, conducted for a wide range of compositions, can help explain previous reports of noninteger scaling for materials involving particle contacts and offers a new opportunity using the variable power law exponent of MAOS rheology to reveal the physics of particle bonds and friction in the rheological response under low deformation instead of at very high shear rates.

In this paper we consider a particular class of solutions of the Rayleigh-Boltzmann equation, known in the nonlinear setting as homoenergetic solutions, which have the form gleft( x,v,t right) =fleft( v-Lleft( tright)x,tright) where the matrix L(t) describes a shear flow deformation. We began this analysis in [22] where we rigorously proved the existence of a stationary non-equilibrium solution and established the different behaviour of the solutions for small and large values of the shear parameter, for cut-off collision kernels with homogeneity parameter 0leq gamma <1, including Maxwell molecules and hard potentials. In this paper, we concentrate in the case where the deformation term dominates the collision term for large times (hyperbolic-dominated regime). This occurs for collision kernels with gamma < 0 and in particular we focus on gamma in (-1,0). In such a hyperbolic-dominated regime, it appears challenging to provide a clear description of the long-term asymptotics of the solutions. Here we present a formal analysis of the long-time asymptotics for the distribution of velocities and provide the explicit form for the asymptotic profile. Additionally, we discuss the different asymptotic behaviour expected in the case of homogeneity gamma < -1. Furthermore, we provide a probabilistic interpretation describing a stochastic process consisting in a combination of collisions and shear flows. The tagged particle velocity {v(t)}_{tgeq 0} is a Markov process that arises from the combination of free flights in a shear flow along with random jumps caused by collisions.

Intraoperative Cone Beam Computed Tomography (CBCT) provides a reliable 3D anatomical context essential for interventional planning. However, its static nature fails to provide continuous monitoring of soft-tissue deformations induced by respiration, probe pressure, and surgical manipulation, leading to navigation discrepancies. We propose a deformation-aware CBCT updating framework that leverages robotic ultrasound as a dynamic proxy to infer tissue motion and update static CBCT slices in real time. Starting from calibration-initialized alignment with linear correlation of linear combination (LC2)-based rigid refinement, our method establishes accurate multimodal correspondence. To capture intraoperative dynamics, we introduce the ultrasound correlation UNet (USCorUNet), a lightweight network trained with optical flow-guided supervision to learn deformation-aware correlation representations, enabling accurate, real-time dense deformation field estimation from ultrasound streams. The inferred deformation is spatially regularized and transferred to the CBCT reference to produce deformation-consistent visualizations without repeated radiation exposure. We validate the proposed approach through deformation estimation and ultrasound-guided CBCT updating experiments. Results demonstrate real-time end-to-end CBCT slice updating and physically plausible deformation estimation, enabling dynamic refinement of static CBCT guidance during robotic ultrasound-assisted interventions. The source code is publicly available at https://github.com/anonymous-codebase/us-cbct-demo.

Implicit Neural Spatial Representation (INSR) has emerged as an effective representation of spatially-dependent vector fields. This work explores solving time-dependent PDEs with INSR. Classical PDE solvers introduce both temporal and spatial discretizations. Common spatial discretizations include meshes and meshless point clouds, where each degree-of-freedom corresponds to a location in space. While these explicit spatial correspondences are intuitive to model and understand, these representations are not necessarily optimal for accuracy, memory usage, or adaptivity. Keeping the classical temporal discretization unchanged (e.g., explicit/implicit Euler), we explore INSR as an alternative spatial discretization, where spatial information is implicitly stored in the neural network weights. The network weights then evolve over time via time integration. Our approach does not require any training data generated by existing solvers because our approach is the solver itself. We validate our approach on various PDEs with examples involving large elastic deformations, turbulent fluids, and multi-scale phenomena. While slower to compute than traditional representations, our approach exhibits higher accuracy and lower memory consumption. Whereas classical solvers can dynamically adapt their spatial representation only by resorting to complex remeshing algorithms, our INSR approach is intrinsically adaptive. By tapping into the rich literature of classic time integrators, e.g., operator-splitting schemes, our method enables challenging simulations in contact mechanics and turbulent flows where previous neural-physics approaches struggle. Videos and codes are available on the project page: http://www.cs.columbia.edu/cg/INSR-PDE/

We propose a reduced-space elasto-dynamic solver that is well suited for augmenting rigged character animations with secondary motion. At the core of our method is a novel deformation subspace based on Linear Blend Skinning that overcomes many of the shortcomings prior subspace methods face. Our skinning subspace is parameterized entirely by a set of scalar weights, which we can obtain through a small, material-aware and rig-sensitive generalized eigenvalue problem. The resulting subspace can easily capture rotational motion and guarantees that the resulting simulation is rotation equivariant. We further propose a simple local-global solver for linear co-rotational elasticity and propose a clustering method to aggregate per-tetrahedra non-linear energetic quantities. The result is a compact simulation that is fully decoupled from the complexity of the mesh.

Acoustic- and elastic-waveform inversion is an important and widely used method to reconstruct subsurface velocity image. Waveform inversion is a typical non-linear and ill-posed inverse problem. Existing physics-driven computational methods for solving waveform inversion suffer from the cycle skipping and local minima issues, and not to mention solving waveform inversion is computationally expensive. In recent years, data-driven methods become a promising way to solve the waveform inversion problem. However, most deep learning frameworks suffer from generalization and over-fitting issue. In this paper, we developed a real-time data-driven technique and we call it VelocityGAN, to accurately reconstruct subsurface velocities. Our VelocityGAN is built on a generative adversarial network (GAN) and trained end-to-end to learn a mapping function from the raw seismic waveform data to the velocity image. Different from other encoder-decoder based data-driven seismic waveform inversion approaches, our VelocityGAN learns regularization from data and further impose the regularization to the generator so that inversion accuracy is improved. We further develop a transfer learning strategy based on VelocityGAN to alleviate the generalization issue. A series of experiments are conducted on the synthetic seismic reflection data to evaluate the effectiveness, efficiency, and generalization of VelocityGAN. We not only compare it with existing physics-driven approaches and data-driven frameworks but also conduct several transfer learning experiments. The experiment results show that VelocityGAN achieves state-of-the-art performance among the baselines and can improve the generalization results to some extent.

In this article, we consider a viscoelastic plate equation with a logarithmic nonlinearity in the presence of nonlinear frictional damping term. Using the the Faedo-Galerkin method we establish the global existence of the solution of the problem and we also prove few general decay rate results.

A droplet impacting a deep fluid bath is as common as rain over the ocean. If the impact is sufficiently gentle, the mediating air layer remains intact, and the droplet may rebound completely from the interface. In this work, we experimentally investigate the role of translational bath motion on the bouncing to coalescence transition. Over a range of parameters, we find that the relative bath motion systematically decreases the normal Weber number required to transition from bouncing to merging. Direct numerical simulations demonstrate that the depression created during impact combined with the translational motion of the bath enhances the air layer drainage on the upstream side of the droplet, ultimately favoring coalescence. A simple geometric argument is presented that rationalizes the collapse of the experimental threshold data, extending what is known for the case of axisymmetric normal impacts to the more general 3D scenario of interest herein.

Simulating physical systems governed by Lagrangian dynamics often entails solving partial differential equations (PDEs) over high-resolution spatial domains, leading to significant computational expense. Reduced-order modeling (ROM) mitigates this cost by evolving low-dimensional latent representations of the underlying system. While neural ROMs enable querying solutions from latent states at arbitrary spatial points, their latent states typically represent the global domain and struggle to capture localized, highly dynamic behaviors such as fluids. We propose a sampling-based reduction framework that evolves Lagrangian systems directly in physical space over the particles themselves, reducing the number of active degrees of freedom via data-driven neural PDE operators. To enable querying at arbitrary spatial locations, we introduce a learnable kernel parameterization that uses local spatial information from time-evolved sample particles to infer the underlying solution manifold. Empirically, our approach achieves a 6.6x to 32x reduction in input dimensionality while maintaining high-fidelity evaluations across diverse Lagrangian regimes, including fluid flows, granular media, and elastoplastic dynamics. We refer to this framework as GIOROM (Geometry-Informed Reduced-Order Modeling). All code and data are available at: https://github.com/HrishikeshVish/GIOROM

The San Andreas Fault system, known for its frequent seismic activity, provides an extensive dataset for earthquake studies. The region's well-instrumented seismic networks have been crucial in advancing research on earthquake statistics, physics, and subsurface Earth structures. In recent years, earthquake data from California has become increasingly valuable for deep learning applications, such as Generalized Phase Detection (GPD) for phase detection and polarity determination, and PhaseNet for phase arrival-time picking. The continuous accumulation of data, particularly those manually labeled by human analysts, serves as an essential resource for advancing both regional and global deep learning models. To support the continued development of machine learning and data mining studies, we have compiled a unified California Earthquake Event Dataset (CEED) that integrates seismic records from the Northern California Earthquake Data Center (NCEDC) and the Southern California Earthquake Data Center (SCEDC). The dataset includes both automatically and manually determined parameters such as earthquake origin time, source location, P/S phase arrivals, first-motion polarities, and ground motion intensity measurements. The dataset is organized in an event-based format organized by year spanning from 2000 to 2024, facilitating cross-referencing with event catalogs and enabling continuous updates in future years. This comprehensive open-access dataset is designed to support diverse applications including developing deep learning models, creating enhanced catalog products, and research into earthquake processes, fault zone structures, and seismic risks.

The industrial application motivating this work is the fatigue computation of aircraft engines' high-pressure turbine blades. The material model involves nonlinear elastoviscoplastic behavior laws, for which the parameters depend on the temperature. For this application, the temperature loading is not accurately known and can reach values relatively close to the creep temperature: important nonlinear effects occur and the solution strongly depends on the used thermal loading. We consider a nonlinear reduced order model able to compute, in the exploitation phase, the behavior of the blade for a new temperature field loading. The sensitivity of the solution to the temperature makes {the classical unenriched proper orthogonal decomposition method} fail. In this work, we propose a new error indicator, quantifying the error made by the reduced order model in computational complexity independent of the size of the high-fidelity reference model. In our framework, when the {error indicator} becomes larger than a given tolerance, the reduced order model is updated using one time step solution of the high-fidelity reference model. The approach is illustrated on a series of academic test cases and applied on a setting of industrial complexity involving 5 million degrees of freedom, where the whole procedure is computed in parallel with distributed memory.

We consider the convected Helmholtz equation modeling linear acoustic propagation at a fixed frequency in a subsonic flow around a scattering object. The flow is supposed to be uniform in the exterior domain far from the object, and potential in the interior domain close to the object. Our key idea is the reformulation of the original problem using the Prandtl--Glauert transformation on the whole flow domain, yielding (i) the classical Helmholtz equation in the exterior domain and (ii) an anisotropic diffusive PDE with skew-symmetric first-order perturbation in the interior domain such that its transmission condition at the coupling boundary naturally fits the Neumann condition from the classical Helmholtz equation. Then, efficient off-the-shelf tools can be used to perform the BEM-FEM coupling, leading to two novel variational formulations for the convected Helmholtz equation. The first formulation involves one surface unknown and can be affected by resonant frequencies, while the second formulation avoids resonant frequencies and involves two surface unknowns. Numerical simulations are presented to compare the two formulations.

A mesh motion model based on deep operator networks is presented. The model is trained on and evaluated against a biharmonic mesh motion model on a fluid-structure interaction benchmark problem and further evaluated in a setting where biharmonic mesh motion fails. The performance of the proposed mesh motion model is comparable to the biharmonic mesh motion on the test problems.

This project focuses on a method to extract a frequency comb in mechanical means, for general interest and numerous practical applications in MEMS. The method of execution is the implementation of a beam that is exhibiting non-linear dynamics that is perturbed and analyzed for its transverse vibrations. The perturbation is an external harmonic driver with a chosen small amplitude and frequency (which is slightly detuned from the beam eigenfrequency), that when engaged with the unperturbed beam oscillations, causes it reach a state of "injection pulling" - an effect that occurs when one harmonic oscillator is coupled with a second one and causes it to oscillate in a frequency near its own. This causes the beam to reach SNIC bifurcation, rendering a frequency comb as desired. Theoretical analysis showed that the problem can be modelled using a non-linear equation of the beam, that translates to a form of the non-linear Duffing equation. While a solution to the dynamics function of the beam is hard to obtain in practice due to mathematical difficulties, a slow evolution model is suggested that is composed of functions of a amplitude and phase. Using several additional mathematical assumptions, the amplitude is seen to be related to the phase, while the phase equation solution is seen to be of the form of Adler's equation. These assumptions ultimately reduce the entire behaviour of the beam to a relatively simple solution to the Adler equation, which has a known analytical solution. Computerized numerical simulations are run on it to check the results and compare them to the theory and desired outcome. The results agreed with the theory and produce the expected frequency comb, showing the assumptions to be valid in extracting the comb.

This paper introduces an advanced Computational Analytical Micromechanics (CAM) framework for linear thermoelastic composites (CMs) with periodic microstructures. The approach is based on an exact new Additive General Integral Equation (AGIE), formulated for compactly supported loading conditions, such as body forces and localized thermal effects (for example laser heating). In addition, new general integral equations (GIEs) are established for arbitrary mechanical and thermal loading. A unified iterative scheme is developed for solving the static AGIEs, where the compact support of loading serves as a new fundamental training parameter. At the core of the methodology lies a generalized Representative Volume Element (RVE) concept that extends Hill classical definition of the RVE. Unlike conventional RVEs, this generalized RVE is not fixed geometrically but emerges naturally from the characteristic scale of localized loading, thereby reducing the analysis of an infinite periodic medium to a finite, data-driven domain. This formulation automatically filters out nonrepresentative subsets of effective parameters while eliminating boundary effects, edge artifacts, and finite-size sample dependencies. Furthermore, the AGIE-based CAM framework integrates seamlessly with machine learning (ML) and neural network (NN) architectures, supporting the development of accurate, physics-informed surrogate nonlocal operators.

Using absorbance measurements through a Couette cell containing an emulsion of buoyant droplets, volume fraction profiles are measured at various shear rates. These viscous resuspension experiments allow a direct determination of the normal stress in the vorticity direction in connection with the suspension balance model that has been developed for suspensions of solid particles. The results unambigously show that the normal viscosity responsible for the shear-induced migration of the droplets is independant on the capillary number, implying that particle deformation does not play a great role. It is similar to that of rigid particles at volume fractions below 40\% but much smaller at higher ones.