new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Jul 29

CPO: Condition Preference Optimization for Controllable Image Generation

To enhance controllability in text-to-image generation, ControlNet introduces image-based control signals, while ControlNet++ improves pixel-level cycle consistency between generated images and the input control signal. To avoid the prohibitive cost of back-propagating through the sampling process, ControlNet++ optimizes only low-noise timesteps (e.g., t < 200) using a single-step approximation, which not only ignores the contribution of high-noise timesteps but also introduces additional approximation errors. A straightforward alternative for optimizing controllability across all timesteps is Direct Preference Optimization (DPO), a fine-tuning method that increases model preference for more controllable images (I^{w}) over less controllable ones (I^{l}). However, due to uncertainty in generative models, it is difficult to ensure that win--lose image pairs differ only in controllability while keeping other factors, such as image quality, fixed. To address this, we propose performing preference learning over control conditions rather than generated images. Specifically, we construct winning and losing control signals, c^{w} and c^{l}, and train the model to prefer c^{w}. This method, which we term Condition Preference Optimization (CPO), eliminates confounding factors and yields a low-variance training objective. Our approach theoretically exhibits lower contrastive loss variance than DPO and empirically achieves superior results. Moreover, CPO requires less computation and storage for dataset curation. Extensive experiments show that CPO significantly improves controllability over the state-of-the-art ControlNet++ across multiple control types: over 10% error rate reduction in segmentation, 70--80% in human pose, and consistent 2--5% reductions in edge and depth maps.

  • 4 authors
·
Nov 6, 2025

IndexTTS2: A Breakthrough in Emotionally Expressive and Duration-Controlled Auto-Regressive Zero-Shot Text-to-Speech

Existing autoregressive large-scale text-to-speech (TTS) models have advantages in speech naturalness, but their token-by-token generation mechanism makes it difficult to precisely control the duration of synthesized speech. This becomes a significant limitation in applications requiring strict audio-visual synchronization, such as video dubbing. This paper introduces IndexTTS2, which proposes a novel, general, and autoregressive model-friendly method for speech duration control. The method supports two generation modes: one explicitly specifies the number of generated tokens to precisely control speech duration; the other freely generates speech in an autoregressive manner without specifying the number of tokens, while faithfully reproducing the prosodic features of the input prompt. Furthermore, IndexTTS2 achieves disentanglement between emotional expression and speaker identity, enabling independent control over timbre and emotion. In the zero-shot setting, the model can accurately reconstruct the target timbre (from the timbre prompt) while perfectly reproducing the specified emotional tone (from the style prompt). To enhance speech clarity in highly emotional expressions, we incorporate GPT latent representations and design a novel three-stage training paradigm to improve the stability of the generated speech. Additionally, to lower the barrier for emotional control, we designed a soft instruction mechanism based on text descriptions by fine-tuning Qwen3, effectively guiding the generation of speech with the desired emotional orientation. Finally, experimental results on multiple datasets show that IndexTTS2 outperforms state-of-the-art zero-shot TTS models in terms of word error rate, speaker similarity, and emotional fidelity. Audio samples are available at: https://index-tts.github.io/index-tts2.github.io/

  • 7 authors
·
Jun 23, 2025

Muse: Towards Reproducible Long-Form Song Generation with Fine-Grained Style Control

Recent commercial systems such as Suno demonstrate strong capabilities in long-form song generation, while academic research remains largely non-reproducible due to the lack of publicly available training data, hindering fair comparison and progress. To this end, we release a fully open-source system for long-form song generation with fine-grained style conditioning, including a licensed synthetic dataset, training and evaluation pipelines, and Muse, an easy-to-deploy song generation model. The dataset consists of 116k fully licensed synthetic songs with automatically generated lyrics and style descriptions paired with audio synthesized by SunoV5. We train Muse via single-stage supervised finetuning of a Qwen-based language model extended with discrete audio tokens using MuCodec, without task-specific losses, auxiliary objectives, or additional architectural components. Our evaluations find that although Muse is trained with a modest data scale and model size, it achieves competitive performance on phoneme error rate, text--music style similarity, and audio aesthetic quality, while enabling controllable segment-level generation across different musical structures. All data, model weights, and training and evaluation pipelines will be publicly released, paving the way for continued progress in controllable long-form song generation research. The project repository is available at https://github.com/yuhui1038/Muse.

  • 17 authors
·
Jan 7

Binding Drift in Multi-Step Tool-Augmented Agents

Tool-augmented language-model agents execute multi-step workflows over external systems, resolving an entity once and then acting on it across subsequent steps. Prior work shows that in single-step actions, agents select the correct tool but bind it to the wrong entity 24-26% of the time. We study what happens to entity bindings over time: do they stay correct, silently drift to a different entity, or, if wrong from the start, propagate and compound? We formalize binding drift (correct at step 1, wrong later) as distinct from error propagation (wrong at step 1, carried forward), and score them on disjoint workflow sets so the two cannot be conflated. In a controlled multi-step testbed (200 workflows, 580 entity-binding-scored steps, four enterprise domains, eight model backends spanning small to frontier), we find: (1) under controlled error injection, an entity lock (the intuitive "persist the first binding" fix) amplifies wrong actions from 907 to 2,746 (3.0x; bootstrap 95% CI [2.8, 3.3]), because it faithfully carries the seeded wrong entity into every later step; (2) the amplification reaches 8.5x on the most affected model (Claude Opus 4.5); (3) a practical LLM-based re-verifier (a single cheap second model call re-reading the original instruction) reduces wrong actions by 79% (0.21x; CI [0.18, 0.25]), closing the gap to within 1 percentage point of an oracle upper-bound (0.20x); and (4) in the natural (non-injected) setting, baseline agents drift on 18% of eligible workflows, with the per-step error rate rising across steps. Persistence and re-verification are not interchangeable: a defense that eliminates drift can worsen propagation, and a practical re-verifier nearly matches oracle recovery.

  • 2 authors
·
Jul 16

Conformal Segmentation in Industrial Surface Defect Detection with Statistical Guarantees

In industrial settings, surface defects on steel can significantly compromise its service life and elevate potential safety risks. Traditional defect detection methods predominantly rely on manual inspection, which suffers from low efficiency and high costs. Although automated defect detection approaches based on Convolutional Neural Networks(e.g., Mask R-CNN) have advanced rapidly, their reliability remains challenged due to data annotation uncertainties during deep model training and overfitting issues. These limitations may lead to detection deviations when processing the given new test samples, rendering automated detection processes unreliable. To address this challenge, we first evaluate the detection model's practical performance through calibration data that satisfies the independent and identically distributed (i.i.d) condition with test data. Specifically, we define a loss function for each calibration sample to quantify detection error rates, such as the complement of recall rate and false discovery rate. Subsequently, we derive a statistically rigorous threshold based on a user-defined risk level to identify high-probability defective pixels in test images, thereby constructing prediction sets (e.g., defect regions). This methodology ensures that the expected error rate (mean error rate) on the test set remains strictly bounced by the predefined risk level. Additionally, we observe a negative correlation between the average prediction set size and the risk level on the test set, establishing a statistically rigorous metric for assessing detection model uncertainty. Furthermore, our study demonstrates robust and efficient control over the expected test set error rate across varying calibration-to-test partitioning ratios, validating the method's adaptability and operational effectiveness.

  • 2 authors
·
Apr 23, 2025

FinRobot: Generative Business Process AI Agents for Enterprise Resource Planning in Finance

Enterprise Resource Planning (ERP) systems serve as the digital backbone of modern financial institutions, yet they continue to rely on static, rule-based workflows that limit adaptability, scalability, and intelligence. As business operations grow more complex and data-rich, conventional ERP platforms struggle to integrate structured and unstructured data in real time and to accommodate dynamic, cross-functional workflows. In this paper, we present the first AI-native, agent-based framework for ERP systems, introducing a novel architecture of Generative Business Process AI Agents (GBPAs) that bring autonomy, reasoning, and dynamic optimization to enterprise workflows. The proposed system integrates generative AI with business process modeling and multi-agent orchestration, enabling end-to-end automation of complex tasks such as budget planning, financial reporting, and wire transfer processing. Unlike traditional workflow engines, GBPAs interpret user intent, synthesize workflows in real time, and coordinate specialized sub-agents for modular task execution. We validate the framework through case studies in bank wire transfers and employee reimbursements, two representative financial workflows with distinct complexity and data modalities. Results show that GBPAs achieve up to 40% reduction in processing time, 94% drop in error rate, and improved regulatory compliance by enabling parallelism, risk control insertion, and semantic reasoning. These findings highlight the potential of GBPAs to bridge the gap between generative AI capabilities and enterprise-grade automation, laying the groundwork for the next generation of intelligent ERP systems.

  • 8 authors
·
Jun 2, 2025

Stepsize anything: A unified learning rate schedule for budgeted-iteration training

The expanding computational costs and limited resources underscore the critical need for budgeted-iteration training, which aims to achieve optimal learning within predetermined iteration budgets.While learning rate schedules fundamentally govern the performance of different networks and tasks, particularly in budgeted-iteration scenarios, their design remains largely heuristic, lacking theoretical foundations.In addition, the optimal learning rate schedule requires extensive trial-and-error selection, making the training process inefficient.In this work, we propose the Unified Budget-Aware (UBA) schedule, a theoretically grounded learning rate schedule that consistently outperforms commonly-used schedules among diverse architectures and tasks under different constrained training budgets.First, we bridge the gap by constructing a novel training budget-aware optimization framework, which explicitly accounts for the robustness to landscape curvature variations.From this framework, we derive the UBA schedule, controlled by a single hyper-parameter varphi that provides a trade-off between flexibility and simplicity, eliminating the need for per-network numerical optimization. Moreover, we establish a theoretical connection between varphi and the condition number, adding interpretation and justification to our approach. Besides, we prove the convergence for different values of varphi.We offer practical guidelines for its selection via theoretical analysis and empirical results.xtensive experimental results show that UBA consistently surpasses the commonly-used schedules across diverse vision and language tasks, spanning network architectures (e.g., ResNet, OLMo) and scales, under different training-iteration budgets.

  • 5 authors
·
May 30, 2025 2

Beyond Per-Token Pricing: A Concurrency-Aware Methodology for LLM Infrastructure Cost Estimation

Every public LLM cost calculator we surveyed treats GPU utilization as a fixed input -- entered by the user, baked in as a preset, or silently assumed at 100% -- never measured against the operator's actual load. We show that this assumption is the dominant source of error: on identical H100 hardware, effective cost spans \0.21 to 15.25 per million output tokens, an underutilization penalty of 2.5-24x across low-to-moderate enterprise loads (1-10 rps) and up to 36.3x near idle -- driven by one operator-controlled variable, offered request rate lambda, which sets in-flight concurrency via Little's Law and which no open-source calculator exposes. Because calculators take utilization as a user-supplied input, any utilization-naive estimate understates true cost by exactly 1/U, systematically mispricing self-hosting -- most severely over-selling it for low-traffic workloads. We propose a measurement methodology that parameterizes the relationship as C_eff = f(H, M, Q, lambda, L), validate it with 42 benchmarks across dense, ultra-sparse MoE, and sparse MoE models, and release vllm-cost-meter, an open-source cost meter that attaches to a live vLLM server and reports real \$/M-tokens against the operator's own traffic. We further show that FP8 quantization benefits the MoE architectures we tested roughly 2.2-2.4x more than the dense model (+69 to +74% vs. +31% peak throughput; n=3, broader validation needed), and our data are consistent with active parameter count, not total model size, being a primary predictor of saturation economics. To rule out single-hardware confounding we repeat the core sweep on A100 80GB PCIe (56 runs): the load-driven spread reproduces at 7.0-11.4x, the active-parameters ordering survives at FP8, and the dense-FP8 advantage inverts on silicon without native FP8 tensor cores -- a hardware-conditional caveat the framework already accommodates.

  • 1 authors
·
Jun 9

HADSF: Aspect Aware Semantic Control for Explainable Recommendation

Recent advances in large language models (LLMs) promise more effective information extraction for review-based recommender systems, yet current methods still (i) mine free-form reviews without scope control, producing redundant and noisy representations, (ii) lack principled metrics that link LLM hallucination to downstream effectiveness, and (iii) leave the cost-quality trade-off across model scales largely unexplored. We address these gaps with the Hyper-Adaptive Dual-Stage Semantic Framework (HADSF), a two-stage approach that first induces a compact, corpus-level aspect vocabulary via adaptive selection and then performs vocabulary-guided, explicitly constrained extraction of structured aspect-opinion triples. To assess the fidelity of the resulting representations, we introduce Aspect Drift Rate (ADR) and Opinion Fidelity Rate (OFR) and empirically uncover a nonmonotonic relationship between hallucination severity and rating prediction error. Experiments on approximately 3 million reviews across LLMs spanning 1.5B-70B parameters show that, when integrated into standard rating predictors, HADSF yields consistent reductions in prediction error and enables smaller models to achieve competitive performance in representative deployment scenarios. We release code, data pipelines, and metric implementations to support reproducible research on hallucination-aware, LLM-enhanced explainable recommendation. Code is available at https://github.com/niez233/HADSF

  • 2 authors
·
Oct 30, 2025

EControl: Fast Distributed Optimization with Compression and Error Control

Modern distributed training relies heavily on communication compression to reduce the communication overhead. In this work, we study algorithms employing a popular class of contractive compressors in order to reduce communication overhead. However, the naive implementation often leads to unstable convergence or even exponential divergence due to the compression bias. Error Compensation (EC) is an extremely popular mechanism to mitigate the aforementioned issues during the training of models enhanced by contractive compression operators. Compared to the effectiveness of EC in the data homogeneous regime, the understanding of the practicality and theoretical foundations of EC in the data heterogeneous regime is limited. Existing convergence analyses typically rely on strong assumptions such as bounded gradients, bounded data heterogeneity, or large batch accesses, which are often infeasible in modern machine learning applications. We resolve the majority of current issues by proposing EControl, a novel mechanism that can regulate error compensation by controlling the strength of the feedback signal. We prove fast convergence for EControl in standard strongly convex, general convex, and nonconvex settings without any additional assumptions on the problem or data heterogeneity. We conduct extensive numerical evaluations to illustrate the efficacy of our method and support our theoretical findings.

  • 3 authors
·
Nov 6, 2023

Quantum error correction below the surface code threshold

Quantum error correction provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. In this work, we present two surface code memories operating below this threshold: a distance-7 code and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ = 2.14 pm 0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% pm 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit's lifetime by a factor of 2.4 pm 0.3. We maintain below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. To probe the limits of our error-correction performance, we run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3 times 10^9 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.

  • 249 authors
·
Aug 23, 2024

Robust Tool Use via Fission-GRPO: Learning to Recover from Execution Errors

Large language models (LLMs) can call tools effectively, yet they remain brittle in multi-turn execution: following a tool call error, smaller models often degenerate into repetitive invalid re-invocations, failing to interpret error feedback and self-correct. This brittleness hinders reliable real-world deployment, where the execution errors are inherently inevitable during tool interaction procedures. We identify a key limitation of current approaches: standard reinforcement learning (RL) treats errors as sparse negative rewards, providing no guidance on how to recover, while pre-collected synthetic error-correction datasets suffer from distribution mismatch with the model's on-policy error modes. To bridge this gap, we propose Fission-GRPO, a framework that converts execution errors into corrective supervision within the RL training loop. Our core mechanism fissions each failed trajectory into a new training instance by augmenting it with diagnostic feedback from a finetuned Error Simulator, then resampling recovery rollouts on-policy. This enables the model to learn from the precise errors it makes during exploration, rather than from static, pre-collected error cases. On the BFCL v4 Multi-Turn, Fission-GRPO improves the error recovery rate of Qwen3-8B by 5.7% absolute, crucially, yielding a 4% overall accuracy gain (42.75% to 46.75%) over GRPO and outperforming specialized tool-use agents.

  • 9 authors
·
Jan 21 2

Error Feedback Reloaded: From Quadratic to Arithmetic Mean of Smoothness Constants

Error Feedback (EF) is a highly popular and immensely effective mechanism for fixing convergence issues which arise in distributed training methods (such as distributed GD or SGD) when these are enhanced with greedy communication compression techniques such as TopK. While EF was proposed almost a decade ago (Seide et al., 2014), and despite concentrated effort by the community to advance the theoretical understanding of this mechanism, there is still a lot to explore. In this work we study a modern form of error feedback called EF21 (Richtarik et al., 2021) which offers the currently best-known theoretical guarantees, under the weakest assumptions, and also works well in practice. In particular, while the theoretical communication complexity of EF21 depends on the quadratic mean of certain smoothness parameters, we improve this dependence to their arithmetic mean, which is always smaller, and can be substantially smaller, especially in heterogeneous data regimes. We take the reader on a journey of our discovery process. Starting with the idea of applying EF21 to an equivalent reformulation of the underlying problem which (unfortunately) requires (often impractical) machine cloning, we continue to the discovery of a new weighted version of EF21 which can (fortunately) be executed without any cloning, and finally circle back to an improved analysis of the original EF21 method. While this development applies to the simplest form of EF21, our approach naturally extends to more elaborate variants involving stochastic gradients and partial participation. Further, our technique improves the best-known theory of EF21 in the rare features regime (Richtarik et al., 2023). Finally, we validate our theoretical findings with suitable experiments.

  • 3 authors
·
Feb 16, 2024

Once-for-All: Controllable Generative Image Compression with Dynamic Granularity Adaptation

Although recent generative image compression methods have demonstrated impressive potential in optimizing the rate-distortion-perception trade-off, they still face the critical challenge of flexible rate adaption to diverse compression necessities and scenarios. To overcome this challenge, this paper proposes a Controllable Generative Image Compression framework, termed Control-GIC, the first capable of fine-grained bitrate adaption across a broad spectrum while ensuring high-fidelity and generality compression. Control-GIC is grounded in a VQGAN framework that encodes an image as a sequence of variable-length codes (i.e. VQ-indices), which can be losslessly compressed and exhibits a direct positive correlation with the bitrates. Drawing inspiration from the classical coding principle, we correlate the information density of local image patches with their granular representations. Hence, we can flexibly determine a proper allocation of granularity for the patches to achieve dynamic adjustment for VQ-indices, resulting in desirable compression rates. We further develop a probabilistic conditional decoder capable of retrieving historic encoded multi-granularity representations according to transmitted codes, and then reconstruct hierarchical granular features in the formalization of conditional probability, enabling more informative aggregation to improve reconstruction realism. Our experiments show that Control-GIC allows highly flexible and controllable bitrate adaption where the results demonstrate its superior performance over recent state-of-the-art methods. Code is available at https://github.com/lianqi1008/Control-GIC.

  • 6 authors
·
Jun 2, 2024

ContinuityBench: A Benchmark and Systems Study of Stateful Failover in Multi-Provider LLM Routing

In production large language model (LLM) deployments, high API availability guarantees do not equate to conversational continuity. When a primary provider experiences an outage or strict rate-limiting, naive stateless failover mechanisms successfully maintain uptime but silently discard conversation history, severely disrupting the user experience. To rigorously quantify and resolve this failure mode, we introduce two novel metrics: Continuity Preservation Rate (CPR) and Continuity Latency Overhead (CLO). We propose a stateful, multi-provider proxy architecture utilizing a History-Forwarding strategy to seamlessly reconstruct conversational state across heterogeneous LLM endpoints during failover events. Furthermore, we release continuity-bench, https://github.com/Vishal-sys-code/continuity-bench, an open evaluation harness designed to stress-test context preservation under high-concurrency provider failure conditions. Our empirical evaluation (N=750 failover events) demonstrates that our stateful proxy achieves a 99.20\% CPR [95\% CI: 98.27\%, 99.63\%], cleanly transferring deep conversational context to fallback providers, compared to a near-0\% preservation rate for standard stateless architectures. Finally, we characterize failover latency distributions, identifying the critical necessity of asynchronous exponential backoff with jitter to prevent cascading retry storms against strict-limit fallback APIs. Our results provide a principled foundation for building robust, state-preserving multi-model inference systems.

  • 2 authors
·
Jul 16

Meta-Tool: Efficient Few-Shot Tool Adaptation for Small Language Models

Can small language models achieve strong tool-use performance without complex adaptation mechanisms? This paper investigates this question through Meta-Tool, a controlled empirical study comparing hypernetwork-based LoRA adaptation against carefully designed few-shot prompting. Using a Llama-3.2-3B-Instruct backbone, we evaluate four adaptation mechanisms--few-shot prompting, documentation encoding, hypernetwork-generated LoRA weights, and value-guided beam search--across four diverse benchmarks: Gorilla APIBench, Spider 2.0, WebArena, and InterCode. Our central finding is a well-supported negative result: despite generating non-trivial weight matrices, the 227.8M-parameter hypernetwork provides no measurable improvement over few-shot prompting alone. Comprehensive ablation studies reveal that few-shot examples contribute +21.5% to performance and documentation contributes +5.0%, while the hypernetwork adds 0%. A 3B model with well-designed prompts achieves 79.7% of GPT-5's average performance at 10 times lower latency. Error analysis across 722 failure cases spanning all shot counts (0--5) shows that at the 5-shot configuration (106 failures), failure modes are task-dependent: schema-heavy tasks (Spider 2.0, WebArena) show near-zero format errors with remaining failures semantic, while format errors dominate on Gorilla (100%) and InterCode (70%). These findings redirect practitioners toward prompt engineering and example curation rather than complex adaptation architectures.

  • 1 authors
·
Apr 21

Prompt Design at Scale: How Format, Instruction Count, and Context Length Shape Instruction Adherence and Hallucination in Large Language Models

Practitioners make three prompt-design decisions with almost no controlled evidence behind them: how to format instructions and context (markdown, plain text, prose, or tabular), how many simultaneous instructions a system prompt can carry before compliance degrades, and how much context a model can hold before recall and honesty degrade. We report two controlled experiments crossing all three factors on one held, contamination-free synthetic corpus (the "Book of Veyra," 8,780 uniquely-named entities, deterministically regenerable from a fixed seed), evaluated across five models. Experiment 1 (960 calls/model) measures instruction-following decay as rule count N grows from 10 to 160, crossed with four formats and system-prompt vs. user-turn placement. Perfect-response rate collapses to zero by N=80 for every model, format, and placement. Placement produces effects at least as large as format at N=160 in most models, but the direction is model-specific. No model shows a reliable markdown advantage; one 35B model favors plain text instead. Experiment 2 (5,520 calls/model) measures recall accuracy, false-premise sycophancy, and absent-fact fabrication across a 2k-to-512k-token context ladder in the same four formats. Recall stays near ceiling through 64-128k tokens, then degrades sharply and format-dependently: one model's accuracy spread reaches 48 points at 128k tokens. Fabrication never occurs (0/5,760 probes), and sycophancy stays negligible (<=8.3%). What rises sharply near each model's context ceiling is outright refusal to answer (0% to 79-90%), distinct from sycophancy or fabrication. Neither pre-registered format ordering holds, and token overhead (+22% to +37% over plain text) further changes which format is preferable where accuracy spread is genuine. We release the full harness, corpus generator, and raw results (VeyraBench): https://github.com/iNetanel/veyrabench

  • 1 authors
·
Jul 20

Tracing LLM Reasoning Processes with Strategic Games: A Framework for Planning, Revision, and Resource-Constrained Decision Making

Large language models (LLMs) are increasingly used for tasks that require complex reasoning. Most benchmarks focus on final outcomes but overlook the intermediate reasoning steps - such as planning, revision, and decision making under resource constraints. We argue that measuring these internal processes is essential for understanding model behavior and improving reliability. We propose using strategic games as a natural evaluation environment: closed, rule-based systems with clear states, limited resources, and automatic feedback. We introduce a framework that evaluates LLMs along three core dimensions: planning, revision, and resource-constrained decision making. To operationalize this, we define metrics beyond win rate, including overcorrection risk rate, correction success rate, improvement slope, and over-budget ratio. In 4320 adversarial rounds across 12 leading models, ChatGPT-o3-mini achieves the top composite score, with a win rate of 74.7 percent, a correction success rate of 78.6 percent, and an improvement slope of 0.041. By contrast, Qwen-Plus, despite an overcorrection risk rate of 81.6 percent, wins only 25.6 percent of its matches - primarily due to excessive resource use. We also observe a negative correlation between overcorrection risk rate and correction success rate (Pearson r = -0.51, p = 0.093), suggesting that more frequent edits do not always improve outcomes. Our findings highlight the value of assessing not only what LLMs decide but how they arrive at those decisions

  • 8 authors
·
Jun 13, 2025

When Correct Isn't Usable: Improving Structured Output Reliability in Small Language Models

Deployed language models must produce outputs that are both correct and format-compliant. We study this structured-output reliability gap using two mathematical benchmarks -- GSM8K and MATH -- as a controlled testbed: ground truth is unambiguous and the output contract is strict (JSON with required fields). We evaluate three 7-9B models under five prompting strategies and report output accuracy -- the joint event of mathematical correctness and valid JSON structure -- as the primary metric. A systematic format failure emerges: NAIVE prompting (no system prompt) achieves up to 85% task accuracy on GSM8K but 0% output accuracy across all models and datasets. REFERENCE prompting (a minimal hand-written JSON format prompt) fares little better, yielding 0% output accuracy for two of four models tested. Constrained decoding enforces syntactic validity but incurs 3.6x-8.2x latency overhead and in several settings degrades task performance substantially. To overcome this limitation, we developed AloLab, an iterative system-prompt optimizer (meta-agent: Claude Sonnet 4.5) requiring only black-box API access to the target model; it reaches 84-87% output accuracy on GSM8K and 34-40% on MATH across five independent runs per model, with 29/30 paired McNemar comparisons against the best static prompt significant at p < 0.05, at near-NAIVE inference latency and without model fine-tuning. The same format failure extends to GPT-4o (OpenAI, 2024), a proprietary closed-source model: REFERENCE achieves 0% output accuracy due to systematic markdown-fence wrapping, while AloLab reaches 95.2% [94.8, 95.6]. An ablation replacing the Sonnet 4.5 meta-agent with Claude 3 Haiku reduces mean output accuracy to 61.0% and increases run-to-run standard deviation from <1 pp to 21.8 pp, confirming that meta-agent capability is a primary driver of optimization quality.

  • 4 authors
·
May 3

Discovering highly efficient low-weight quantum error-correcting codes with reinforcement learning

The realization of scalable fault-tolerant quantum computing is expected to hinge on quantum error-correcting codes. In the quest for more efficient quantum fault tolerance, a critical code parameter is the weight of measurements that extract information about errors to enable error correction: as higher measurement weights require higher implementation costs and introduce more errors, it is important in code design to optimize measurement weight. This underlies the surging interest in quantum low-density parity-check (qLDPC) codes, the study of which has primarily focused on the asymptotic (large-code-limit) properties. In this work, we introduce a versatile and computationally efficient approach to stabilizer code weight reduction based on reinforcement learning (RL), which produces new low-weight codes that substantially outperform the state of the art in practically relevant parameter regimes, extending significantly beyond previously accessible small distances. For example, our approach demonstrates savings in physical qubit overhead compared to existing results by 1 to 2 orders of magnitude for weight 6 codes and brings the overhead into a feasible range for near-future experiments. We also investigate the interplay between code parameters using our RL framework, offering new insights into the potential efficiency and power of practically viable coding strategies. Overall, our results demonstrate how RL can effectively advance the crucial yet challenging problem of quantum code discovery and thereby facilitate a faster path to the practical implementation of fault-tolerant quantum technologies.

  • 2 authors
·
Feb 20, 2025 4

SCI: A Metacognitive Control for Signal Dynamics

Modern deep learning systems are typically deployed as open-loop function approximators: they map inputs to outputs in a single pass, without regulating how much computation or explanatory effort is spent on a given case. In safety-critical settings, this is brittle: easy and ambiguous inputs receive identical processing, and uncertainty is only read off retrospectively from raw probabilities. We introduce the Surgical Cognitive Interpreter (SCI), a lightweight closed-loop metacognitive control layer that wraps an existing stochastic model and turns prediction into an iterative process. SCI monitors a scalar interpretive state SP(t), here instantiated as a normalized entropy-based confidence signal, and adaptively decides whether to stop, continue sampling, or abstain. The goal is not to improve accuracy per se, but to regulate interpretive error ΔSP and expose a safety signal that tracks when the underlying model is likely to fail. We instantiate SCI around Monte Carlo dropout classifiers in three domains: vision (MNIST digits), medical time series (MIT-BIH arrhythmia), and industrial condition monitoring (rolling-element bearings). In all cases, the controller allocates more inference steps to misclassified inputs than to correct ones (up to about 3-4x on MNIST and bearings, and 1.4x on MIT-BIH). The resulting ΔSP acts as a usable safety signal for detecting misclassifications (AUROC 0.63 on MNIST, 0.70 on MIT-BIH, 0.86 on bearings). Code and reproducibility: https://github.com/vishal-1344/sci

  • 1 authors
·
Nov 15, 2025

Shape it Up! Restoring LLM Safety during Finetuning

Finetuning large language models (LLMs) enables user-specific customization but introduces critical safety risks: even a few harmful examples can compromise safety alignment. A common mitigation strategy is to update the model more strongly on examples deemed safe, while downweighting or excluding those flagged as unsafe. However, because safety context can shift within a single example, updating the model equally on both harmful and harmless parts of a response is suboptimal-a coarse treatment we term static safety shaping. In contrast, we propose dynamic safety shaping (DSS), a framework that uses fine-grained safety signals to reinforce learning from safe segments of a response while suppressing unsafe content. To enable such fine-grained control during finetuning, we introduce a key insight: guardrail models, traditionally used for filtering, can be repurposed to evaluate partial responses, tracking how safety risk evolves throughout the response, segment by segment. This leads to the Safety Trajectory Assessment of Response (STAR), a token-level signal that enables shaping to operate dynamically over the training sequence. Building on this, we present STAR-DSS, guided by STAR scores, that robustly mitigates finetuning risks and delivers substantial safety improvements across diverse threats, datasets, and model families-all without compromising capability on intended tasks. We encourage future safety research to build on dynamic shaping principles for stronger mitigation against evolving finetuning risks.

  • 5 authors
·
May 22, 2025

Denoising LM: Pushing the Limits of Error Correction Models for Speech Recognition

Language models (LMs) have long been used to improve results of automatic speech recognition (ASR) systems, but they are unaware of the errors that ASR systems make. Error correction models are designed to fix ASR errors, however, they showed little improvement over traditional LMs mainly due to the lack of supervised training data. In this paper, we present Denoising LM (DLM), which is a scaled error correction model trained with vast amounts of synthetic data, significantly exceeding prior attempts meanwhile achieving new state-of-the-art ASR performance. We use text-to-speech (TTS) systems to synthesize audio, which is fed into an ASR system to produce noisy hypotheses, which are then paired with the original texts to train the DLM. DLM has several key ingredients: (i) up-scaled model and data; (ii) usage of multi-speaker TTS systems; (iii) combination of multiple noise augmentation strategies; and (iv) new decoding techniques. With a Transformer-CTC ASR, DLM achieves 1.5% word error rate (WER) on test-clean and 3.3% WER on test-other on Librispeech, which to our knowledge are the best reported numbers in the setting where no external audio data are used and even match self-supervised methods which use external audio data. Furthermore, a single DLM is applicable to different ASRs, and greatly surpassing the performance of conventional LM based beam-search rescoring. These results indicate that properly investigated error correction models have the potential to replace conventional LMs, holding the key to a new level of accuracy in ASR systems.

  • 6 authors
·
May 24, 2024

e1: Learning Adaptive Control of Reasoning Effort

Increasing the thinking budget of AI models can significantly improve accuracy, but not all questions warrant the same amount of reasoning. Users may prefer to allocate different amounts of reasoning effort depending on how they value output quality versus latency and cost. To leverage this tradeoff effectively, users need fine-grained control over the amount of thinking used for a particular query, but few approaches enable such control. Existing methods require users to specify the absolute number of desired tokens, but this requires knowing the difficulty of the problem beforehand to appropriately set the token budget for a query. To address these issues, we propose Adaptive Effort Control, a self-adaptive reinforcement learning method that trains models to use a user-specified fraction of tokens relative to the current average chain-of-thought length for each query. This approach eliminates dataset- and phase-specific tuning while producing better cost-accuracy tradeoff curves compared to standard methods. Users can dynamically adjust the cost-accuracy trade-off through a continuous effort parameter specified at inference time. We observe that the model automatically learns to allocate resources proportionally to the task difficulty and, across model scales ranging from 1.5B to 32B parameters, our approach enables a 2-3x reduction in chain-of-thought length while maintaining or improving performance relative to the base model used for RL training.

  • 5 authors
·
Oct 30, 2025

How Many Tries Does It Take? Iterative Self-Repair in LLM Code Generation Across Model Scales and Benchmarks

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.

  • 1 authors
·
Apr 11

Toward Robust Semantic Communications: Proactive Importance-Ordered Restructuring for Enhanced Unequal Error Protection

Semantic communications (SemCom) is a promising task-oriented paradigm in which semantic features exhibit non-uniform importance. Consequently, unequal error protection (UEP), which allocates resources based on semantic importance, plays a pivotal role in maximizing system utility. However, most existing schemes adopt passive importance evaluation, which neither proactively reshapes the importance distribution nor explores its impact on UEP performance. In this paper, we propose a novel importance-ordered semantic feature restructuring (ISFR) scheme that proactively enforces a descending importance hierarchy and jointly optimizes multi-dimensional resources to improve system utility. Specifically, modules with decreasing retention probabilities and increasing distortion levels are employed, which drive the model to concentrate key semantics into front-end features and thus strengthen importance differentiation. Moreover, a joint optimization problem that jointly optimizes channel matching, feature selection, modulation schemes, and power allocation is formulated to minimize the importance-weighted total semantic distortion. To solve this non-convex problem, a hierarchical decoupling strategy is proposed, which decomposes it into four tractable subproblems. This approach leverages the ordered prior to drastically prune the search space for feature selection and modulation, while integrating greedy-based channel matching and convex power allocation. Simulation results demonstrate that the proposed ISFR scheme outperforms traditional uniform importance-based schemes under harsh channel conditions and limited resources, validating the significant robustness improvement enabled by the concentration of key semantic information.

  • 6 authors
·
Mar 31

From Classification to Optimization: Slicing and Resource Management with TRACTOR

5G and beyond networks promise advancements in bandwidth, latency, and connectivity. The Open Radio Access Network (O-RAN) framework enhances flexibility through network slicing and closed-loop RAN control. Central to this evolution is integrating machine learning (ML) for dynamic network control. This paper presents a framework to optimize O-RAN operation. First, we build and share a robust O-RAN dataset from real-world traffic captured across diverse locations and mobility scenarios, replicated within a full-stack srsRAN-based O-RAN system using the Colosseum RF emulator. This dataset supports ML training and deployment. We then introduce a traffic classification approach leveraging various ML models, demonstrating rapid training, testing, and refinement to improve accuracy. With up to 99% offline accuracy and 92% online accuracy for specific slices, our framework adapts efficiently to different models and network conditions. Finally, we present a physical resource block (PRB) assignment optimization strategy using reinforcement learning to refine resource allocation. Our learned policy achieves a mean performance score (0.631), surpassing a manually configured expert policy (0.609) and a random baseline (0.588), demonstrating improved PRB utilization. More importantly, our approach exhibits lower variability, with the Coefficient of Variation (CV) reduced by up to an order of magnitude in three out of four cases, ensuring more consistent performance. Our contributions, including open-source tools and datasets, accelerate O-RAN and ML-driven network control research.

  • 6 authors
·
Dec 12, 2023

BenchOverflow: Measuring Overflow in Large Language Models via Plain-Text Prompts

We investigate a failure mode of large language models (LLMs) in which plain-text prompts elicit excessive outputs, a phenomenon we term Overflow. Unlike jailbreaks or prompt injection, Overflow arises under ordinary interaction settings and can lead to elevated serving cost, latency, and cross-user performance degradation, particularly when scaled across many requests. Beyond usability, the stakes are economic and environmental: unnecessary tokens increase per-request cost and energy consumption, compounding into substantial operational spend and carbon footprint at scale. Moreover, Overflow represents a practical vector for compute amplification and service degradation in shared environments. We introduce BenchOverflow, a model-agnostic benchmark of nine plain-text prompting strategies that amplify output volume without adversarial suffixes or policy circumvention. Using a standardized protocol with a fixed budget of 5000 new tokens, we evaluate nine open- and closed-source models and observe pronounced rightward shifts and heavy tails in length distributions. Cap-saturation rates (CSR@1k/3k/5k) and empirical cumulative distribution functions (ECDFs) quantify tail risk; within-prompt variance and cross-model correlations show that Overflow is broadly reproducible yet heterogeneous across families and attack vectors. A lightweight mitigation-a fixed conciseness reminder-attenuates right tails and lowers CSR for all strategies across the majority of models. Our findings position length control as a measurable reliability, cost, and sustainability concern rather than a stylistic quirk. By enabling standardized comparison of length-control robustness across models, BenchOverflow provides a practical basis for selecting deployments that minimize resource waste and operating expense, and for evaluating defenses that curb compute amplification without eroding task performance.

  • 3 authors
·
Jan 12

OpAgent: Operator Agent for Web Navigation

To fulfill user instructions, autonomous web agents must contend with the inherent complexity and volatile nature of real-world websites. Conventional paradigms predominantly rely on Supervised Fine-Tuning (SFT) or Offline Reinforcement Learning (RL) using static datasets. However, these methods suffer from severe distributional shifts, as offline trajectories fail to capture the stochastic state transitions and real-time feedback of unconstrained wide web environments. In this paper, we propose a robust Online Reinforcement Learning WebAgent, designed to optimize its policy through direct, iterative interactions with unconstrained wide websites. Our approach comprises three core innovations: 1) Hierarchical Multi-Task Fine-tuning: We curate a comprehensive mixture of datasets categorized by functional primitives -- Planning, Acting, and Grounding -- establishing a Vision-Language Model (VLM) with strong instruction-following capabilities for Web GUI tasks. 2) Online Agentic RL in the Wild: We develop an online interaction environment and fine-tune the VLM using a specialized RL pipeline. We introduce a Hybrid Reward Mechanism that combines a ground-truth-agnostic WebJudge for holistic outcome assessment with a Rule-based Decision Tree (RDT) for progress reward. This system effectively mitigates the credit assignment challenge in long-horizon navigation. Notably, our RL-enhanced model achieves a 38.1\% success rate (pass@5) on WebArena, outperforming all existing monolithic baselines. 3) Operator Agent: We introduce a modular agentic framework, namely OpAgent, orchestrating a Planner, Grounder, Reflector, and Summarizer. This synergy enables robust error recovery and self-correction, elevating the agent's performance to a new State-of-the-Art (SOTA) success rate of 71.6\%.

  • 15 authors
·
Apr 29

Variable frame rate-based data augmentation to handle speaking-style variability for automatic speaker verification

The effects of speaking-style variability on automatic speaker verification were investigated using the UCLA Speaker Variability database which comprises multiple speaking styles per speaker. An x-vector/PLDA (probabilistic linear discriminant analysis) system was trained with the SRE and Switchboard databases with standard augmentation techniques and evaluated with utterances from the UCLA database. The equal error rate (EER) was low when enrollment and test utterances were of the same style (e.g., 0.98% and 0.57% for read and conversational speech, respectively), but it increased substantially when styles were mismatched between enrollment and test utterances. For instance, when enrolled with conversation utterances, the EER increased to 3.03%, 2.96% and 22.12% when tested on read, narrative, and pet-directed speech, respectively. To reduce the effect of style mismatch, we propose an entropy-based variable frame rate technique to artificially generate style-normalized representations for PLDA adaptation. The proposed system significantly improved performance. In the aforementioned conditions, the EERs improved to 2.69% (conversation -- read), 2.27% (conversation -- narrative), and 18.75% (pet-directed -- read). Overall, the proposed technique performed comparably to multi-style PLDA adaptation without the need for training data in different speaking styles per speaker.

  • 6 authors
·
Aug 8, 2020

Reinforcement Learning for Code Optimization

RL for code correctness is now established: have the model generate a program, run it against hidden test cases, and reward solutions that pass. Extending this to code optimization seems straightforward: just add execution time to the reward. But in practice, once timing drives the reward, small problems in measurement noise, reward sparsity, or GRPO instability overwhelm the signal and make RL fail: generated solutions are barely faster, and more of them can fail. We make execution time learnable through three stages: (1) how code is tested, by building DMC-Optim with large optimization tests and a calibrated sandbox; (2) how speed is turned into reward, by composing correctness and speed in the RL environment and using an offline simulator to predict the most promising configurations; and (3) how the model learns from that reward, by adapting GRPO and evaluation to the sparser, noisier timed-execution setting. On DMC-Optim, the strongest optimization-aware configurations improve strict top-50% pass@1 from 18.0% to 31.3% on Qwen 2.5 7B and from 30.7% to 50.4% on CWM 32B. These gains further increase at stricter percentiles such as top-30%, with 125% relative improvement for CWM 32B, while preserving pure-correctness scores. When the timing sandbox is degraded, robust optimization RL reaches 100% to 200% improvement over standard RLVR, depending on the evaluation criterion. On LCB, CWM 32B wins up to 83% of median-sample speed comparisons against standard RLVR. Relative to the fastest correct human submissions per problem, it reaches about half the human rate of complexity-class improvements (14% vs. 28%).

facebook AI at Meta
·
Jul 27 1

Rolling Forcing: Autoregressive Long Video Diffusion in Real Time

Streaming video generation, as one fundamental component in interactive world models and neural game engines, aims to generate high-quality, low-latency, and temporally coherent long video streams. However, most existing work suffers from severe error accumulation that often significantly degrades the generated stream videos over long horizons. We design Rolling Forcing, a novel video generation technique that enables streaming long videos with minimal error accumulation. Rolling Forcing comes with three novel designs. First, instead of iteratively sampling individual frames, which accelerates error propagation, we design a joint denoising scheme that simultaneously denoises multiple frames with progressively increasing noise levels. This design relaxes the strict causality across adjacent frames, effectively suppressing error growth. Second, we introduce the attention sink mechanism into the long-horizon stream video generation task, which allows the model to keep key value states of initial frames as a global context anchor and thereby enhances long-term global consistency. Third, we design an efficient training algorithm that enables few-step distillation over largely extended denoising windows. This algorithm operates on non-overlapping windows and mitigates exposure bias conditioned on self-generated histories. Extensive experiments show that Rolling Forcing enables real-time streaming generation of multi-minute videos on a single GPU, with substantially reduced error accumulation.

TencentARC ARC Lab, Tencent PCG
·
Sep 29, 2025 3

Chat with AI: The Surprising Turn of Real-time Video Communication from Human to AI

AI Video Chat emerges as a new paradigm for Real-time Communication (RTC), where one peer is not a human, but a Multimodal Large Language Model (MLLM). This makes interaction between humans and AI more intuitive, as if chatting face-to-face with a real person. However, this poses significant challenges to latency, because the MLLM inference takes up most of the response time, leaving very little time for video streaming. Due to network uncertainty and instability, transmission latency becomes a critical bottleneck preventing AI from being like a real person. To address this, we propose Artic, an AI-oriented Real-time Communication framework, exploring the network requirement shift from "humans watching video" to "AI understanding video". To reduce bitrate dramatically while maintaining MLLM accuracy, we propose Context-Aware Video Streaming that recognizes the importance of each video region for chat and allocates bitrate almost exclusively to chat-important regions. To avoid packet retransmission, we propose Loss-Resilient Adaptive Frame Rate that leverages previous frames to substitute for lost/delayed frames while avoiding bitrate waste. To evaluate the impact of video streaming quality on MLLM accuracy, we build the first benchmark, named Degraded Video Understanding Benchmark (DeViBench). Finally, we discuss some open questions and ongoing solutions for AI Video Chat.

  • 4 authors
·
Jul 14, 2025 2

AEGIS: Automated Error Generation and Identification for Multi-Agent Systems

As Multi-Agent Systems (MAS) become increasingly autonomous and complex, understanding their error modes is critical for ensuring their reliability and safety. However, research in this area has been severely hampered by the lack of large-scale, diverse datasets with precise, ground-truth error labels. To address this bottleneck, we introduce AEGIS, a novel framework for Automated Error Generation and Identification for Multi-Agent Systems. By systematically injecting controllable and traceable errors into initially successful trajectories, we create a rich dataset of realistic failures. This is achieved using a context-aware, LLM-based adaptive manipulator that performs sophisticated attacks like prompt injection and response corruption to induce specific, predefined error modes. We demonstrate the value of our dataset by exploring three distinct learning paradigms for the error identification task: Supervised Fine-Tuning, Reinforcement Learning, and Contrastive Learning. Our comprehensive experiments show that models trained on AEGIS data achieve substantial improvements across all three learning paradigms. Notably, several of our fine-tuned models demonstrate performance competitive with or superior to proprietary systems an order of magnitude larger, validating our automated data generation framework as a crucial resource for developing more robust and interpretable multi-agent systems. Our project website is available at https://kfq20.github.io/AEGIS-Website.

  • 10 authors
·
Sep 16, 2025

SAES-SVD: Self-Adaptive Suppression of Accumulated and Local Errors for SVD-based LLM Compression

The rapid growth in the parameter scale of large language models (LLMs) has created a high demand for efficient compression techniques. As a hardware-agnostic and highly compatible technique, low-rank compression has been widely adopted. However, existing methods typically compress each layer independently by minimizing per-layer reconstruction error, overlooking a critical limitation: the reconstruction error propagates and accumulates through the network, which leads to amplified global deviations from the full-precision baseline. To address this, we propose Self-Adaptive Error Suppression SVD (SAES-SVD), a LLMs compression framework that jointly optimizes intra-layer reconstruction and inter-layer error compensation. SAES-SVD is composed of two novel components: (1) Cumulative Error-Aware Layer Compression (CEALC), which formulates the compression objective as a combination of local reconstruction and weighted cumulative error compensation. Based on it, we derive a closed-form low-rank solution relied on second-order activation statistics, which explicitly aligns each layer's output with its full-precision counterpart to compensate for accumulated errors. (2) Adaptive Collaborative Error Suppression (ACES), which automatically adjusts the weighting coefficient to enhance the low-rank structure of the compression objective in CEALC. Specifically, the coefficient is optimized to maximize the ratio between the Frobenius norm of the compressed layer's output and that of the compression objective under a fixed rank, thus ensuring that the rank budget is utilized effectively. Extensive experiments across multiple LLM architectures and tasks show that, without fine-tuning or mixed-rank strategies, SAES-SVD consistently improves post-compression performance.

  • 5 authors
·
Feb 2

Token Reduction Is Not Cost Reduction

Context-reduction layers for API-based coding agents, including command-output compressors, retrieval rankers, and API-boundary proxies, are commonly evaluated by how much context or tool output they remove. We ask a different question: which interventions actually reduce end-to-end billed cost while preserving task success? Our primary evidence is a pre-specified, hash-frozen, paired campaign of 2,908 provider-billed Claude Code runs, of which 2,848 were analyzed, covering 103 tasks, seven repositories, and three models. The campaign compared a baseline with two generations of hook-based compression and an API-boundary proxy within a broader measured program of roughly 5,500 billed executions. Three findings emerge. First, prompt-cache traffic dominated cost composition, accounting for about 87% of reconstructed four-component cost (about 80% of the actual bill), with an 8.7% dollar-weighted residual not attributable from retained telemetry. Second, local payload reduction was not a reliable predictor of end-to-end billed cost. An arm that removed 38% of estimated raw tool-output tokens incurred 6.8% higher paired cost (95% CI: +2.8% to +11.3%), while per-task reduction showed only a weak association with cost change (Pearson r = 0.15). Third, aggressive compression can remove action-critical evidence: on SWE-bench-derived Go tasks, compression reduced successful patch application from 27/40 to 15/40 by corrupting verbatim edit anchors. We propose evaluating context-reduction systems by success-adjusted billed cost rather than token reduction alone.

  • 2 authors
·
Jul 14

SafeCOMM: What about Safety Alignment in Fine-Tuned Telecom Large Language Models?

Fine-tuning large language models (LLMs) for telecom tasks and datasets is a common practice to adapt general-purpose models to the telecom domain. However, little attention has been paid to how this process may compromise model safety. Recent research has shown that even benign fine-tuning can degrade the safety alignment of LLMs, causing them to respond to harmful or unethical user queries. In this paper, we investigate this issue for telecom-tuned LLMs using three representative datasets featured by the GenAINet initiative. We show that safety degradation persists even for structured and seemingly harmless datasets such as 3GPP standards and tabular records, indicating that telecom-specific data is not immune to safety erosion during fine-tuning. We further extend our analysis to publicly available Telecom LLMs trained via continual pre-training, revealing that safety alignment is often severely lacking, primarily due to the omission of safety-focused instruction tuning. To address these issues in both fine-tuned and pre-trained models, we conduct extensive experiments and evaluate three safety realignment defenses (SafeInstruct, SafeLoRA, and SafeMERGE) using established red-teaming benchmarks. The results show that, across all settings, the proposed defenses can effectively restore safety after harmful degradation without compromising downstream task performance, leading to Safe teleCOMMunication (SafeCOMM) models. In a nutshell, our work serves as a diagnostic study and practical guide for safety realignment in telecom-tuned LLMs, and emphasizes the importance of safety-aware instruction and fine-tuning for real-world deployments of Telecom LLMs.

  • 6 authors
·
May 29, 2025

D^2Quant: Accurate Low-bit Post-Training Weight Quantization for LLMs

Large language models (LLMs) deliver strong performance, but their high compute and memory costs make deployment difficult in resource-constrained scenarios. Weight-only post-training quantization (PTQ) is appealing, as it reduces memory usage and enables practical speedup without low-bit operators or specialized hardware. However, accuracy often degrades significantly in weight-only PTQ at sub-4-bit precision, and our analysis identifies two main causes: (1) down-projection matrices are a well-known quantization bottleneck, but maintaining their fidelity often requires extra bit-width; (2) weight quantization induces activation deviations, but effective correction strategies remain underexplored. To address these issues, we propose D^2Quant, a novel weight-only PTQ framework that improves quantization from both the weight and activation perspectives. On the weight side, we design a Dual-Scale Quantizer (DSQ) tailored to down-projection matrices, with an absorbable scaling factor that significantly improves accuracy without increasing the bit budget. On the activation side, we propose Deviation-Aware Correction (DAC), which incorporates a mean-shift correction within LayerNorm to mitigate quantization-induced activation distribution shifts. Extensive experiments across multiple LLM families and evaluation metrics show that D^2Quant delivers superior performance for weight-only PTQ at sub-4-bit precision. The code and models will be available at https://github.com/XIANGLONGYAN/D2Quant.

  • 8 authors
·
Jan 30

Compression Favors Consistency, Not Truth: When and Why Language Models Prefer Correct Information

Why do language models sometimes prefer correct statements even when trained on mixed-quality data? We introduce the Compression--Consistency Principle: next-token prediction favors hypotheses that allow shorter and more internally consistent descriptions of the training data. Truth bias emerges only when false alternatives are structurally harder to compress. We test this using small GPT-2-style character-level transformers (3.5M--86M parameters) on synthetic math corpora with controlled mixtures of correct and incorrect rules. In the random-error setting, models strongly prefer correct completions in paired evaluation: 83.1% accuracy at balanced data and 67.0% even when correct rules appear in only 10% of the corpus. Replacing random errors with a coherent but mathematically incorrect rule system largely eliminates the preference (near-chance accuracy). In a more natural-language-like synthetic world, the effect is weaker but still present (57.7%). Additional experiments show that embedding verification steps can restore preference for correctness even at small scale, while increasing the number of consistent rules produces a graded improvement in accuracy. Our results suggest that what appears as a "truth bias" is largely a side effect of compression pressure and preference for internal consistency, rather than an intrinsic drive toward truth. Full code and data are available at https://github.com/Rai220/compression-drives-truth.

  • 1 authors
·
Mar 12 2

SWE-RM: Execution-free Feedback For Software Engineering Agents

Execution-based feedback like unit testing is widely used in the development of coding agents through test-time scaling (TTS) and reinforcement learning (RL). This paradigm requires scalable and reliable collection of unit test cases to provide accurate feedback, and the resulting feedback is often sparse and cannot effectively distinguish between trajectories that are both successful or both unsuccessful. In contrast, execution-free feedback from reward models can provide more fine-grained signals without depending on unit test cases. Despite this potential, execution-free feedback for realistic software engineering (SWE) agents remains underexplored. Aiming to develop versatile reward models that are effective across TTS and RL, however, we observe that two verifiers with nearly identical TTS performance can nevertheless yield very different results in RL. Intuitively, TTS primarily reflects the model's ability to select the best trajectory, but this ability does not necessarily generalize to RL. To address this limitation, we identify two additional aspects that are crucial for RL training: classification accuracy and calibration. We then conduct comprehensive controlled experiments to investigate how to train a robust reward model that performs well across these metrics. In particular, we analyze the impact of various factors such as training data scale, policy mixtures, and data source composition. Guided by these investigations, we introduce SWE-RM, an accurate and robust reward model adopting a mixture-of-experts architecture with 30B total parameters and 3B activated during inference. SWE-RM substantially improves SWE agents on both TTS and RL performance. For example, it increases the accuracy of Qwen3-Coder-Flash from 51.6% to 62.0%, and Qwen3-Coder-Max from 67.0% to 74.6% on SWE-Bench Verified using TTS, achieving new state-of-the-art performance among open-source models.

  • 9 authors
·
Dec 26, 2025 2

Efficient Switchable Safety Control in LLMs via Magic-Token-Guided Co-Training

Current methods for content safety in Large Language Models (LLMs), such as Supervised Fine-Tuning (SFT) and Reinforcement Learning from Human Feedback (RLHF), often rely on multi-stage training pipelines and lack fine-grained, post-deployment controllability. To address these limitations, we propose a unified co-training framework that efficiently integrates multiple safety behaviors: positive (lawful/prosocial), negative (unfiltered/risk-prone) and rejective (refusal-oriented/conservative) within a single SFT stage. Notably, each behavior is dynamically activated via a simple system-level instruction, or magic token, enabling stealthy and efficient behavioral switching at inference time. This flexibility supports diverse deployment scenarios, such as positive for safe user interaction, negative for internal red-teaming, and rejective for context-aware refusals triggered by upstream moderation signals. This co-training strategy induces a distinct Safety Alignment Margin in the output space, characterized by well-separated response distributions corresponding to each safety mode. The existence of this margin provides empirical evidence for the model's safety robustness and enables unprecedented fine-grained control. Experiments show that our method matches the safety alignment quality of SFT+DPO, with our 8B model notably surpassing DeepSeek-R1 (671B) in safety performance, while significantly reducing both training complexity and deployment costs. This work presents a scalable, efficient, and highly controllable solution for LLM content safety.

  • 4 authors
·
Aug 11, 2025

MHPO: Modulated Hazard-aware Policy Optimization for Stable Reinforcement Learning

Regulating the importance ratio is critical for the training stability of Group Relative Policy Optimization (GRPO) based frameworks. However, prevailing ratio control methods, such as hard clipping, suffer from non-differentiable boundaries and vanishing gradient regions, failing to maintain gradient fidelity. Furthermore, these methods lack a hazard-aware mechanism to adaptively suppress extreme deviations, leaving the optimization process vulnerable to abrupt policy shifts. To address these challenges, we propose Modulated Hazard-aware Policy Optimization (MHPO), a novel framework designed for robust and stable reinforcement learning. The proposed MHPO introduces a Log-Fidelity Modulator (LFM) to map unbounded importance ratios into a bounded, differentiable domain. This mechanism effectively prevents high-variance outlier tokens from destabilizing the loss landscape while ensuring global gradient stability. Complementarily, a Decoupled Hazard Penalty (DHP) integrates cumulative hazard functions from survival analysis to independently regulate positive and negative policy shifts. By shaping the optimization landscape with hazard-aware penalties, the proposed MHPO achieves fine-grained regulation of asymmetric policy shifts simultaneously mitigating mode collapse from over-expansion and preventing policy erosion from catastrophic contraction within a stabilized trust region. Extensive evaluations on diverse reasoning benchmarks across both text-based and vision-language tasks demonstrate that MHPO consistently outperforms existing methods, achieving superior performance while significantly enhancing training stability.

tencent Tencent
·
Mar 13 2

GlowQ: Group-Shared LOw-Rank Approximation for Quantized LLMs

Quantization techniques such as BitsAndBytes, AWQ, and GPTQ are widely used as a standard method in deploying large language models but often degrades accuracy when using low-bit representations, e.g., 4 bits. Low-rank correction methods (e.g., LQER, QERA, ASER) has been proposed to mitigate this issue, however, they restore all layers and insert error-correction modules into every decoder block, which increases latency and memory overhead. To address this limitation, we propose GlowQ, a group-shared low-rank approximation for quantized LLMs that caches a single shared right factor per input-sharing group and restores only the groups or layers that yield the highest accuracy benefit. GlowQ computes the high-precision projection once per input-sharing group and reuses it across its modules, reducing parameter and memory overhead, and retaining the expressivity of layer-specific corrections. We also propose a selective variant, GlowQ-S, that applies the cached shared module only where it provides the largest benefit. Compared with strong baselines, our approach reduces TTFB by (5.6%) and increases throughput by (9.6%) on average, while reducing perplexity on WikiText-2 by (0.17%) and increasing downstream accuracy by 0.42 percentage points. The selective model GlowQ-S further reduces latency, cutting TTFB by (23.4%) and increasing throughput by (37.4%), while maintaining accuracy within 0.2 percentage points on average.

  • 3 authors
·
Mar 25

ASR-EC Benchmark: Evaluating Large Language Models on Chinese ASR Error Correction

Automatic speech Recognition (ASR) is a fundamental and important task in the field of speech and natural language processing. It is an inherent building block in many applications such as voice assistant, speech translation, etc. Despite the advancement of ASR technologies in recent years, it is still inevitable for modern ASR systems to have a substantial number of erroneous recognition due to environmental noise, ambiguity, etc. Therefore, the error correction in ASR is crucial. Motivated by this, this paper studies ASR error correction in the Chinese language, which is one of the most popular languages and enjoys a large number of users in the world. We first create a benchmark dataset named ASR-EC that contains a wide spectrum of ASR errors generated by industry-grade ASR systems. To the best of our knowledge, it is the first Chinese ASR error correction benchmark. Then, inspired by the recent advances in large language models (LLMs), we investigate how to harness the power of LLMs to correct ASR errors. We apply LLMs to ASR error correction in three paradigms. The first paradigm is prompting, which is further categorized as zero-shot, few-shot, and multi-step. The second paradigm is finetuning, which finetunes LLMs with ASR error correction data. The third paradigm is multi-modal augmentation, which collectively utilizes the audio and ASR transcripts for error correction. Extensive experiments reveal that prompting is not effective for ASR error correction. Finetuning is effective only for a portion of LLMs. Multi-modal augmentation is the most effective method for error correction and achieves state-of-the-art performance.

  • 5 authors
·
Dec 4, 2024

Q-Cluster: Quantum Error Mitigation Through Noise-Aware Unsupervised Learning

Quantum error mitigation (QEM) is critical in reducing the impact of noise in the pre-fault-tolerant era, and is expected to complement error correction in fault-tolerant quantum computing (FTQC). In this paper, we propose a novel QEM approach, Q-Cluster, that uses unsupervised learning (clustering) to reshape the measured bit-string distribution. Our approach starts with a simplified bit-flip noise model. It first performs clustering on noisy measurement results, i.e., bit-strings, based on the Hamming distance. The centroid of each cluster is calculated using a qubit-wise majority vote. Next, the noisy distribution is adjusted with the clustering outcomes and the bit-flip error rates using Bayesian inference. Our simulation results show that Q-Cluster can mitigate high noise rates (up to 40% per qubit) with the simple bit-flip noise model. However, real quantum computers do not fit such a simple noise model. To address the problem, we (a) apply Pauli twirling to tailor the complex noise channels to Pauli errors, and (b) employ a machine learning model, ExtraTrees regressor, to estimate an effective bit-flip error rate using a feature vector consisting of machine calibration data (gate & measurement error rates), circuit features (number of qubits, numbers of different types of gates, etc.) and the shape of the noisy distribution (entropy). Our experimental results show that our proposed Q-Cluster scheme improves the fidelity by a factor of 1.46x, on average, compared to the unmitigated output distribution, for a set of low-entropy benchmarks on five different IBM quantum machines. Our approach outperforms the state-of-art QEM approaches M3 [24], Hammer [35], and QBEEP [33] by 1.29x, 1.47x, and 2.65x, respectively.

  • 3 authors
·
Apr 14, 2025

ControlSpeech: Towards Simultaneous and Independent Zero-shot Speaker Cloning and Zero-shot Language Style Control

In this paper, we present ControlSpeech, a text-to-speech (TTS) system capable of fully cloning the speaker's voice and enabling arbitrary control and adjustment of speaking style. Prior zero-shot TTS models only mimic the speaker's voice without further control and adjustment capabilities while prior controllable TTS models cannot perform speaker-specific voice generation. Therefore, ControlSpeech focuses on a more challenging task: a TTS system with controllable timbre, content, and style at the same time. ControlSpeech takes speech prompts, content prompts, and style prompts as inputs and utilizes bidirectional attention and mask-based parallel decoding to capture codec representations corresponding to timbre, content, and style in a discrete decoupling codec space. Moreover, we analyze the many-to-many issue in textual style control and propose the Style Mixture Semantic Density (SMSD) module, which is based on Gaussian mixture density networks, to resolve this problem. To facilitate empirical validations, we make available a new style controllable dataset called VccmDataset. Our experimental results demonstrate that ControlSpeech exhibits comparable or state-of-the-art (SOTA) performance in terms of controllability, timbre similarity, audio quality, robustness, and generalizability. The relevant code and demo are available at https://github.com/jishengpeng/ControlSpeech .

  • 11 authors
·
Jun 3, 2024

FaSNet: Low-latency Adaptive Beamforming for Multi-microphone Audio Processing

Beamforming has been extensively investigated for multi-channel audio processing tasks. Recently, learning-based beamforming methods, sometimes called neural beamformers, have achieved significant improvements in both signal quality (e.g. signal-to-noise ratio (SNR)) and speech recognition (e.g. word error rate (WER)). Such systems are generally non-causal and require a large context for robust estimation of inter-channel features, which is impractical in applications requiring low-latency responses. In this paper, we propose filter-and-sum network (FaSNet), a time-domain, filter-based beamforming approach suitable for low-latency scenarios. FaSNet has a two-stage system design that first learns frame-level time-domain adaptive beamforming filters for a selected reference channel, and then calculate the filters for all remaining channels. The filtered outputs at all channels are summed to generate the final output. Experiments show that despite its small model size, FaSNet is able to outperform several traditional oracle beamformers with respect to scale-invariant signal-to-noise ratio (SI-SNR) in reverberant speech enhancement and separation tasks. Moreover, when trained with a frequency-domain objective function on the CHiME-3 dataset, FaSNet achieves 14.3\% relative word error rate reduction (RWERR) compared with the baseline model. These results show the efficacy of FaSNet particularly in reverberant and noisy signal conditions.

  • 5 authors
·
Sep 30, 2019

Sequential Gradient Coding For Straggler Mitigation

In distributed computing, slower nodes (stragglers) usually become a bottleneck. Gradient Coding (GC), introduced by Tandon et al., is an efficient technique that uses principles of error-correcting codes to distribute gradient computation in the presence of stragglers. In this paper, we consider the distributed computation of a sequence of gradients {g(1),g(2),ldots,g(J)}, where processing of each gradient g(t) starts in round-t and finishes by round-(t+T). Here Tgeq 0 denotes a delay parameter. For the GC scheme, coding is only across computing nodes and this results in a solution where T=0. On the other hand, having T>0 allows for designing schemes which exploit the temporal dimension as well. In this work, we propose two schemes that demonstrate improved performance compared to GC. Our first scheme combines GC with selective repetition of previously unfinished tasks and achieves improved straggler mitigation. In our second scheme, which constitutes our main contribution, we apply GC to a subset of the tasks and repetition for the remainder of the tasks. We then multiplex these two classes of tasks across workers and rounds in an adaptive manner, based on past straggler patterns. Using theoretical analysis, we demonstrate that our second scheme achieves significant reduction in the computational load. In our experiments, we study a practical setting of concurrently training multiple neural networks over an AWS Lambda cluster involving 256 worker nodes, where our framework naturally applies. We demonstrate that the latter scheme can yield a 16\% improvement in runtime over the baseline GC scheme, in the presence of naturally occurring, non-simulated stragglers.

  • 3 authors
·
Nov 24, 2022

Cross-Layer Protocols for Multimedia Communications over Wireless Networks

In the last few years, the Internet throughput, usage and reliability have increased almost exponentially. The introduction of broadband wireless mobile ad hoc networks (MANETs) and cellular networks together with increased computational power have opened the door for a new breed of applications to be created, namely real-time multimedia applications. Delivering real-time multimedia traffic over a complex network like the Internet is a particularly challenging task since these applications have strict quality-of-service (QoS) requirements on bandwidth, delay, and delay jitter. Traditional Internet protocol (IP)-based best effort service is not able to meet these stringent requirements. The time-varying nature of wireless channels and resource constrained wireless devices make the problem even more difficult. To improve perceived media quality by end users over wireless Internet, QoS supports can be addressed in different layers, including application layer, transport layer and link layer. Cross layer design is a well-known approach to achieve this adaptation. In cross-layer design, the challenges from the physical wireless medium and the QoS-demands from the applications are taken into account so that the rate, power, and coding at the physical (PHY) layer can adapted to meet the requirements of the applications given the current channel and network conditions. A number of propositions for cross-layer designs exist in the literature. In this chapter, an extensive review has been made on these cross-layer architectures that combine the application-layer, transport layer and the link layer controls. Particularly, the issues like channel estimation techniques, adaptive controls at the application and link layers for energy efficiency, priority based scheduling, transmission rate control at the transport layer, and adaptive automatic repeat request (ARQ) are discussed in detail.

  • 1 authors
·
Oct 1, 2011