new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 16

SyncCache: Exploiting Asymmetric Dynamics for Fast Audio-Driven Portrait Animation

Diffusion Transformers (DiTs) have significantly advanced audio-driven portrait animation, but their high computational cost leads to substantial inference latency. Although training-free diffusion caching accelerates inference significant, existing methods are primarily developed for text-conditioned generation and overlook the spatial and modality imbalances inherent in audio-driven portrait animation. In this paper, we propose SyncCache, a training-free caching acceleration method tailored for DiT-based portrait animation that explicitly exploits asymmetric dynamics. Specifically, high-frequency dynamics driven by audio conditions and concentrated in human regions are more challenging and critical to cache and reuse than the low-frequency visual background in portrait animation. First, we introduce Spatially-Asymmetric Probing to prioritize error sensitivity in dynamic human region. Second, through Modality-Decoupled Caching, we bypass heavy DiT block by reusing stable inter-block residuals, while continuously recomputing lightweight audio blocks to preserve precise lip synchronization. Furthermore, we introduce a cache ratio to control cache capacity and formulate memory-adaptive cache selection as an offline dynamic programming problem without online overhead. Extensive experiments demonstrate that SyncCache achieves superior speed-quality trade-offs, delivering up to 4.12x acceleration on HunyuanVideo-Avatar and 3.75x on Wan-S2V with near-lossless visual fidelity and precise audio alignment.

  • 11 authors
·
Jun 28

HEART: Exploiting Head Heterogeneity in Sparse Attention for Video Diffusion

Sparse attention accelerates video diffusion by allowing each attention head to focus on only a small subset of interactions. Existing methods already construct head-specific sparse patterns conditioned on the input. However, we find that these heads also differ in two less obvious but practically important ways. First, for some heads, sparse attention masks remain stable across many denoising steps, whereas others change rapidly. Second, heads differ substantially in their sensitivity to sparsification: applying the same threshold can induce markedly different errors in the final denoising velocity. Ignoring these differences leads to redundant mask prediction and suboptimal threshold calibration across heads under a global sparsity budget. We present HEART, short for Heterogeneity-Exploiting Adaptive Refresh and Thresholding, a training-free framework that exploits both forms of head heterogeneity. First, Temporal Mask Reuse (TMR) uses a lightweight per-head query-key drift signal to determine whether a cached sparse mask remains reliable across denoising steps, refreshing it only when the drift exceeds a prescribed threshold. Second, Error-guided Budgeted Calibration (EBC) evaluates candidate thresholds offline using a frequency-weighted denoising-velocity error, and assigns each head an appropriate threshold under a global sparsity budget. HEART requires no retraining, weight modification, or sparse-kernel changes, and can be integrated directly into existing sparse-attention pipelines. Across Wan2.1-1.3B, Wan2.1-14B, and HunyuanVideo-13B, HEART consistently pushes the quality--efficiency frontier of advanced sparse attention methods such as XAttention and SVG2 outward.

  • 6 authors
·
Aug 8

Component Type, Not Reconstruction Error, Predicts Attention Quantization Sensitivity

Many post-training quantization (PTQ) methods use layer-wise reconstruction, second-order proxy objectives, or activation-aware transformations to reduce quantization-induced error. Whether that error signal predicts the downstream functional impact of quantizing an individual attention projection has not been directly characterized. We sweep nine open-weight language models (1.3B--8B parameters; OPT, GPT-J, LLaMA-1/2/3, Mistral, Qwen 2.5) and quantize one attention projection at a time under round-to-nearest (RTN) and, for seven models, GPTQ at 3 and 4 bits, recording reconstruction error, perplexity change, and per-projection activation-weighted quantization error for 3,808 distinct measurements. We find: (1) within a given component type (Q, K, V, or O), reconstruction error explains less than 10% of the variance in perplexity sensitivity in 27 of 36 cases under RTN, with median R^2 = 0.044; (2) both component type and layer identity explain more variance than reconstruction error in all 9 models, with layer identity the strongest predictor in 7 of 9 models and component type strongest in the remaining 2; (3) value (V) projections are the most commonly dominant component, accounting for 38--51% of total positive Delta PPL in seven of nine models; (4) the dominant component is broadly preserved between RTN and GPTQ (5 of 7 cases); and (5) activation-weighted quantization error is a moderately better within-component predictor than reconstruction error for V projections specifically (median R^2 of 0.20 vs. 0.06). These findings indicate that relative weight reconstruction error alone is insufficient for sensitivity-aware bit allocation, and that V projections merit dedicated consideration in mixed-precision schemes.

  • 3 authors
·
Aug 8

An error indicator-based adaptive reduced order model for nonlinear structural mechanics -- application to high-pressure turbine blades

The industrial application motivating this work is the fatigue computation of aircraft engines' high-pressure turbine blades. The material model involves nonlinear elastoviscoplastic behavior laws, for which the parameters depend on the temperature. For this application, the temperature loading is not accurately known and can reach values relatively close to the creep temperature: important nonlinear effects occur and the solution strongly depends on the used thermal loading. We consider a nonlinear reduced order model able to compute, in the exploitation phase, the behavior of the blade for a new temperature field loading. The sensitivity of the solution to the temperature makes {the classical unenriched proper orthogonal decomposition method} fail. In this work, we propose a new error indicator, quantifying the error made by the reduced order model in computational complexity independent of the size of the high-fidelity reference model. In our framework, when the {error indicator} becomes larger than a given tolerance, the reduced order model is updated using one time step solution of the high-fidelity reference model. The approach is illustrated on a series of academic test cases and applied on a setting of industrial complexity involving 5 million degrees of freedom, where the whole procedure is computed in parallel with distributed memory.

  • 2 authors
·
Apr 19, 2019

Saturation Makes Quantization Error Additive: A Coverage Model with a Certificate

Mixed-precision quantization must decide which parts of a model to keep at higher precision. A common premise, shared by sensitivity-based methods such as HAWQ and CoopQ, is that the loss from quantizing a set of layers can be reconstructed from per-layer or pairwise sensitivities measured in isolation. We test this premise at the 4-bit weight-and-activation precisions now being deployed, treating the change in loss f(S) from quantizing a layer set S as a set function on the Boolean cube and analyzing it through two classical changes of basis. This analysis yields two findings. First, across configurations drawn from the deployment distribution, 85--93\% of the variance of f is explained by per-layer effects alone. Second, a monotone transform of a sum of per-layer terms reproduces f's ranking of configurations, misordering at most 2\% of pairs. We propose the coverage model f(S)=cbigl(1-prod_{iin S}(1-a_i)bigr), which reproduces the measured variance profile of f to within a few percent from its L fitted break-rates. This structure supports two predictors of a configuration's loss, each with L+1 parameters. The additive model is the optimal first-order predictor. By Parseval's identity its mean-squared error equals the variance of f left unexplained by per-layer effects, which we measure on full lattices, estimate out of sample at full-network scale, and report with every result as a certificate of how well any additive model can do. The coverage model itself is the second predictor. As allocators at matched memory, they attain the lowest KL divergence among the compared allocators on models from 30B to 355B parameters. Below four bits, the resulting allocations continue to solve code and reasoning tasks at budgets where allocations from gradient sensitivities no longer produce terminating generations.

  • 1 authors
·
Jul 13

KVTuner: Sensitivity-Aware Layer-Wise Mixed-Precision KV Cache Quantization for Efficient and Nearly Lossless LLM Inference

KV cache quantization can improve Large Language Models (LLMs) inference throughput and latency in long contexts and large batch-size scenarios while preserving LLMs effectiveness. However, current methods have three unsolved issues: overlooking layer-wise sensitivity to KV cache quantization, high overhead of online fine-grained decision-making, and low flexibility to different LLMs and constraints. Therefore, we theoretically analyze the inherent correlation of layer-wise transformer attention patterns to KV cache quantization errors and study why key cache is generally more important than value cache for quantization error reduction. We further propose a simple yet effective framework KVTuner to adaptively search for the optimal hardware-friendly layer-wise KV quantization precision pairs for coarse-grained KV cache with multi-objective optimization and directly utilize the offline searched configurations during online inference. To reduce the computational cost of offline calibration, we utilize the intra-layer KV precision pair pruning and inter-layer clustering to reduce the search space. Experimental results show that we can achieve nearly lossless 3.25-bit mixed precision KV cache quantization for LLMs like Llama-3.1-8B-Instruct and 4.0-bit for sensitive models like Qwen2.5-7B-Instruct on mathematical reasoning tasks. The maximum inference throughput can be improved by 21.25\% compared with KIVI-KV8 quantization over various context lengths. Our code and searched configurations are available at https://github.com/cmd2001/KVTuner.

  • 9 authors
·
Feb 6, 2025

Quantifying the Sensitivity of Inverse Reinforcement Learning to Misspecification

Inverse reinforcement learning (IRL) aims to infer an agent's preferences (represented as a reward function R) from their behaviour (represented as a policy pi). To do this, we need a behavioural model of how pi relates to R. In the current literature, the most common behavioural models are optimality, Boltzmann-rationality, and causal entropy maximisation. However, the true relationship between a human's preferences and their behaviour is much more complex than any of these behavioural models. This means that the behavioural models are misspecified, which raises the concern that they may lead to systematic errors if applied to real data. In this paper, we analyse how sensitive the IRL problem is to misspecification of the behavioural model. Specifically, we provide necessary and sufficient conditions that completely characterise how the observed data may differ from the assumed behavioural model without incurring an error above a given threshold. In addition to this, we also characterise the conditions under which a behavioural model is robust to small perturbations of the observed policy, and we analyse how robust many behavioural models are to misspecification of their parameter values (such as e.g.\ the discount rate). Our analysis suggests that the IRL problem is highly sensitive to misspecification, in the sense that very mild misspecification can lead to very large errors in the inferred reward function.

  • 2 authors
·
Mar 11, 2024

HeSS: Head Sensitivity Score for Sparsity Redistribution in VGGT

Visual Geometry Grounded Transformer (VGGT) has advanced 3D vision, yet its global attention layers suffer from quadratic computational costs that hinder scalability. Several sparsification-based acceleration techniques have been proposed to alleviate this issue, but they often suffer from substantial accuracy degradation. We hypothesize that the accuracy degradation stems from the heterogeneity in head-wise sparsification sensitivity, as the existing methods apply a uniform sparsity pattern across all heads. Motivated by this hypothesis, we present a two-stage sparsification pipeline that effectively quantifies and exploits headwise sparsification sensitivity. In the first stage, we measure head-wise sparsification sensitivity using a novel metric, the Head Sensitivity Score (HeSS), which approximates the Hessian with respect to two distinct error terms on a small calibration set. In the inference stage, we perform HeSS-Guided Sparsification, leveraging the pre-computed HeSS to reallocate the total attention budget-assigning denser attention to sensitive heads and sparser attention to more robust ones. We demonstrate that HeSS effectively captures head-wise sparsification sensitivity and empirically confirm that attention heads in the global attention layers exhibit heterogeneous sensitivity characteristics. Extensive experiments further show that our method effectively mitigates performance degradation under high sparsity, demonstrating strong robustness across varying sparsification levels. Code is available at https://github.com/libary753/HeSS.

  • 6 authors
·
Mar 26

Characterizing Soft-Error Resiliency in Arm's Ethos-U55 Embedded Machine Learning Accelerator

As Neural Processing Units (NPU) or accelerators are increasingly deployed in a variety of applications including safety critical applications such as autonomous vehicle, and medical imaging, it is critical to understand the fault-tolerance nature of the NPUs. We present a reliability study of Arm's Ethos-U55, an important industrial-scale NPU being utilised in embedded and IoT applications. We perform large scale RTL-level fault injections to characterize Ethos-U55 against the Automotive Safety Integrity Level D (ASIL-D) resiliency standard commonly used for safety-critical applications such as autonomous vehicles. We show that, under soft errors, all four configurations of the NPU fall short of the required level of resiliency for a variety of neural networks running on the NPU. We show that it is possible to meet the ASIL-D level resiliency without resorting to conventional strategies like Dual Core Lock Step (DCLS) that has an area overhead of 100%. We achieve so through selective protection, where hardware structures are selectively protected (e.g., duplicated, hardened) based on their sensitivity to soft errors and their silicon areas. To identify the optimal configuration that minimizes the area overhead while meeting the ASIL-D standard, the main challenge is the large search space associated with the time-consuming RTL simulation. To address this challenge, we present a statistical analysis tool that is validated against Arm silicon and that allows us to quickly navigate hundreds of billions of fault sites without exhaustive RTL fault injections. We show that by carefully duplicating a small fraction of the functional blocks and hardening the Flops in other blocks meets the ASIL-D safety standard while introducing an area overhead of only 38%.

  • 5 authors
·
Apr 14, 2024

ESTANet: Efficient Online Error Detection in Procedural Videos via Prediction Inconsistency

An efficient and accurate system for detecting errors in procedural tasks is crucial for supporting human needs in daily life, as it can provide instant notifications and guide people to correct mistakes. In this work, we study real-time online error detection in procedural videos from a simple but overlooked perspective: the prediction behavior of action detectors themselves. Instead of designing complex architectures or specialized supervision, we observe that action detectors naturally exhibit different prediction characteristics depending on their sensitivity to input dynamics and temporal context. We therefore propose ESTANet (Error-Sensitive and Temporally-vArying Network), a lightweight framework that detects errors by exploiting inconsistencies among action predictions produced by a small set of action detectors. We construct standard and error-sensitive action detectors that behave similarly on correct executions but respond differently when errors occur. Meanwhile, detectors operating with different temporal contexts further amplify prediction inconsistencies when the procedure deviates from the intended sequence. During inference, we detect errors by aggregating mismatches between standard and error-sensitive predictions through majority voting to flag frames that contain errors. Extensive experiments on EgoPER, Assembly-101-O, and EPIC-Tent-O demonstrate that ESTANet achieves state-of-the-art performance in online error detection while maintaining real-time efficiency with a lightweight architecture. Our results highlight that leveraging the intrinsic properties of action detectors can yield a powerful and practical solution for online error detection without increasing architectural design complexity.

  • 5 authors
·
Jun 23

From Spark to Fire: Modeling and Mitigating Error Cascades in LLM-Based Multi-Agent Collaboration

Large Language Model-based Multi-Agent Systems (LLM-MAS) are increasingly applied to complex collaborative scenarios. However, their collaborative mechanisms may cause minor inaccuracies to gradually solidify into system-level false consensus through iteration. Such risks are difficult to trace since errors can propagate and amplify through message dependencies. Existing protections often rely on single-agent validation or require modifications to the collaboration architecture, which can weaken effective information flow and may not align with natural collaboration processes in real tasks. To address this, we propose a propagation dynamics model tailored for LLM-MAS that abstracts collaboration as a directed dependency graph and provides an early-stage risk criterion to characterize amplification risk. Through experiments on six mainstream frameworks, we identify three vulnerability classes: cascade amplification, topological sensitivity, and consensus inertia. We further instantiate an attack where injecting just a single atomic error seed leads to widespread failure. In response, we introduce a genealogy-graph-based governance layer, implemented as a message-layer plugin, that suppresses both endogenous and exogenous error amplification without altering the collaboration architecture. Experiments show that this approach raises the defense success rate from a baseline of 0.32 to over 0.89 and significantly mitigates the cascading spread of minor errors.

  • 8 authors
·
Mar 3

TypedBench: A Benchmark for Calibration, Framing Sensitivity, and Cost in System One Decision Models

System One models output calibrated probabilities over typed answers such as categorical choices, ordinal levels, or binary outcomes, via a non-generative interface. Software can act on these probabilities through thresholds, cost-weighted choices, and escalation rules. Consequently, if these probabilities are miscalibrated or wording-sensitive, the software ma take unintended actions leaving human operators with no textual rationale to inspect. Current evaluations largely report accuracy and calibration on public classification datasets without a clear reference. We present TypedBench, a benchmark for typed decision models like Jev built from seven policy-labelled generators and nine evaluation suites. We report accuracy as median and range across paraphrases, and calibration error relative to the finite-sample noise floor of a matched, perfectly calibrated predictor. We assess probability quality through selective prediction, ordinal proper scoring rules, and realised cost under asymmetric cost matrices. We evaluate a hosted model, an open encoder, and a family of open decoders spanning 0.8B-9B parameters on identical items. The hosted model follows the stated policy but is wording-sensitive and systematically underconfident; under asymmetric costs, using its probabilities can be worse than taking its top answer. Decoders route exactly and are slow as options or questions are added. The decoder is least accurate on policy questions and degrades with more options. Overall, typed decision models must be evaluated jointly on policy adherence, wording robustness, probability quality, and induced decision outcomes.

  • 4 authors
·
Oct 8

Radio Astronomy in the Era of Vision-Language Models: Prompt Sensitivity and Adaptation

Vision-Language Models (VLMs), such as recent Qwen and Gemini models, are positioned as general-purpose AI systems capable of reasoning across domains. Yet their capabilities in scientific imaging, especially on unfamiliar and potentially previously unseen data distributions, remain poorly understood. In this work, we assess whether generic VLMs, presumed to lack exposure to astronomical corpora, can perform morphology-based classification of radio galaxies using the MiraBest FR-I/FR-II dataset. We explore prompting strategies using natural language and schematic diagrams, and, to the best of our knowledge, we are the first to introduce visual in-context examples within prompts in astronomy. Additionally, we evaluate lightweight supervised adaptation via LoRA fine-tuning. Our findings reveal three trends: (i) even prompt-based approaches can achieve good performance, suggesting that VLMs encode useful priors for unfamiliar scientific domains; (ii) however, outputs are highly unstable, i.e. varying sharply with superficial prompt changes such as layout, ordering, or decoding temperature, even when semantic content is held constant; and (iii) with just 15M trainable parameters and no astronomy-specific pretraining, fine-tuned Qwen-VL achieves near state-of-the-art performance (3% Error rate), rivaling domain-specific models. These results suggest that the apparent "reasoning" of VLMs often reflects prompt sensitivity rather than genuine inference, raising caution for their use in scientific domains. At the same time, with minimal adaptation, generic VLMs can rival specialized models, offering a promising but fragile tool for scientific discovery.

  • 6 authors
·
Aug 31, 2025

A KL Lens on Quantization: Fast, Forward-Only Sensitivity for Mixed-Precision SSM-Transformer Models

Deploying Large Language Models (LLMs) on edge devices faces severe computational and memory constraints, limiting real-time processing and on-device intelligence. Hybrid architectures combining Structured State Space Models (SSMs) with transformer-based LLMs offer a balance of efficiency and performance. Aggressive quantization can drastically cut model size and speed up inference, but its uneven effects on different components require careful management. In this work, we propose a lightweight, backpropagation-free, surrogate-based sensitivity analysis framework to identify hybrid SSM-Transformer components most susceptible to quantization-induced degradation. Relying solely on forward-pass metrics, our method avoids expensive gradient computations and retraining, making it suitable for situations where access to in-domain data is limited due to proprietary restrictions or privacy constraints. We also provide a formal analysis showing that the Kullback-Leibler (KL) divergence metric better captures quantization sensitivity for Language modeling tasks than widely adopted alternatives such as mean squared error (MSE) and signal-to-quantization-noise ratio (SQNR). Through extensive experiments on SSM and hybrid architectures, our ablation studies confirm that KL-based rankings align with observed performance drops and outperform alternative metrics. This framework enables the practical deployment of advanced hybrid models on resource-constrained edge devices with minimal accuracy loss. We further validate our approach with real-world on-device profiling on Intel Lunar Lake hardware, demonstrating that KL-guided mixed-precision achieves near-FP16 perplexity with model sizes and throughput competitive with Uniform INT4 on both CPU and GPU execution modes. Code is available at https://github.com/jasonkongie/kl-ssm-quant.

  • 4 authors
·
Apr 14

Q-ARVD: Quantizing Autoregressive Video Diffusion Models

Autoregressive video diffusion models (ARVDs) have emerged as a promising architecture for streaming video generation, paving the way for real-time interactive video generation and world modeling. Despite their potential, the substantial inference cost of ARVDs remains a major obstacle to practical deployment, making model quantization a natural direction for improving efficiency. However, quantization for ARVDs remains largely unexplored. Our empirical analysis shows that directly applying existing quantization schemes developed for standard diffusion transformers to ARVDs leads to suboptimal performance, revealing quantization behaviors that differ from those observed in bidirectional diffusion models. In this paper, we identify two critical challenges in quantizing ARVDs: (C1) Highly unbalanced frame-wise quantization sensitivity. Error accumulation during autoregressive generation can induce severely skewed quantization sensitivity across frames, following an exponential-like decay pattern. (C2) Prominent and heterogeneous outlier patterns in weights. Weight distributions exhibit pronounced outlier channels, whose patterns vary substantially across layer types and block depths. To address these issues, we propose Q-ARVD, a novel framework for accurate ARVD quantization. (S1) To tackle the highly unbalanced frame-wise sensitivity, Q-ARVD incorporates a final-quality aware frame-weighting mechanism into the quantization objective. (S2) To prevent heterogeneous outliers from degrading performance, Q-ARVD introduces an outlier-aware adaptive dual-scale quantization, which automatically detects the presence and quantity of outlier channels for an arbitrary layer, and isolates them to protect normal channels. Extensive experiments demonstrate the superiority of Q-ARVD.

Where Post-Training Quantization Breaks Text Embedders: A Measured Map Across Four Embedder Families

Weight-only post-training quantization is the cheapest way to shrink a retrieval embedder, and the received advice for applying it -- protect the embedding table, allocate bits by module sensitivity, prefer a ranking-aware objective over weight reconstruction -- was carried into LLM quantization largely intact. We test that advice on retrieval embedders directly, quantizing five checkpoints from four architecture families across a grid of bit widths and group sizes, and isolating the embedding, attention and feed-forward blocks at each width. Every heuristic fails to transfer as stated. The embedding table never emerges as the dominant isolated protection priority in any family, despite being the largest tensor in several of them. Module sensitivity does not survive as a transferable ordering: at INT4/g16 the spread between modules is too small to allocate against, at INT3 the ordering becomes family-dependent and joint damage stops being the sum of its parts, and at INT2 comparable reconstruction error accompanies retention ranging from 1.3 to 65.9 percent of full precision. A cheap reconstruction proxy is useful for screening uniform bit widths but substantially less reliable for choosing which tensors to protect; its apparent strength across the whole grid is a range-extension artifact. A distilled 109M student at INT3 holds 78.04 NDCG@10 in 68.4 MB and dominates the extreme-PTQ arm of its own 0.6B teacher, 297.9 MB at 64.46, on both size and quality -- but only inside the task it was distilled for. Sizes are byte counts of files that exist rather than arithmetic estimates, and the measurement repository carries the byte provenance for every one of them.

  • 1 authors
·
Sep 13

From Decorative to Load-Bearing: Task Difficulty Shapes the Causal Role of Chain-of-Thought

Chain-of-thought (CoT) monitoring is only meaningful if written reasoning causally constrains the answer. We introduce continuation-based causal testing, an ablation-patch intervention that perturbs one reasoning step, truncates the chain, and forces the model to continue from the corrupted prefix. It measures how load-bearing a CoT is for the final answer, a behavioral notion distinct from mechanistic faithfulness. Across Gemma-2-9B-IT, Llama-3.1-8B-Instruct, and DeepSeek-R1-Distill-Qwen-7B on GSM8K, MMLU, and BIG-Bench Hard, CoT load-bearingness tracks model-relative task difficulty: on easy tasks models silently bypass their own reasoning; on hard tasks they follow corrupted steps and propagate errors. A matched 2x2 analysis shows task difficulty dominates perturbation type: error propagation rises 16x from GSM8K to BBH multistep arithmetic, and a variance partition over 28,584 continuations attributes 98.8% of explained deviance to task difficulty versus 0.8% to perturbation type. Reasoning-specific RL suppresses error propagation and compresses the gradient. A four-variant judge-sensitivity analysis and blind two-annotator study (n=500) show the error-propagation vs. non-propagation label is invariant to judge prompt, with perfect inter-annotator agreement (Cohen's kappa = 1.00). This gradient creates a structural problem for CoT-based oversight and AI safety monitoring: where the trace is easy to read it carries little signal, and where it matters errors propagate before a monitor can intervene. Linear probes on hidden states separate silent bypass, self-correction, and error propagation, but additive activation steering provides limited causal control, flipping only about 25% of error-propagation cases at best. Behavioral mode is readable but not reliably controllable.

  • 2 authors
·
Sep 20

A Real-Time Bike-Pedestrian Safety System with Wide-Angle Perception and Evaluation Testbed for Urban Intersections

Collisions between cyclists and pedestrians at urban intersections remain a persistent source of injuries, yet few systems attempt real-time warnings to unequipped road users using commodity hardware. We present a prototype collision warning system that runs on a single edge device with a wide-angle fisheye camera, producing audible and visual alerts at 30\,fps. The system makes four contributions. First, we develop a calibration pipeline for ultra-wide fisheye lenses that overcomes corner-detection failure and optimizer divergence through perspective remapping and direct bundle adjustment. Second, we combine fisheye-aware object detection with a closed-form ground-plane projection via a precomputed lookup table. Third, we introduce a design-time conformance simulation with 24 scripted hazard scenarios, stochastic size-aware detection failures, and a latency sweep showing that a first-order kinematic predictor maintains the mean warning budget above the distracted-pedestrian reaction time across realistic camera latencies. Fourth, we formalize the decision layer as a separable, auditable testbench with explicit deployment gates, contestability mechanisms, and a residual risk register. Under conformance testing with fisheye localization error, the selected pipeline configuration achieves 93.3\% sensitivity and 92.3\% specificity, with a mean warning budget of 3.3\,s. The system design was informed by community-aided design workshops. Code and replication scripts are available at https://github.com/mkturkcan/bikeped.

  • 1 authors
·
Apr 17

OAM-Induced Lattice Rotation Reveals a Fractional Optimum in Fault-Tolerant GKP Quantum Sensing

Photon loss and dephasing rapidly degrade the sensitivity of quantum sensors, yet systematic methods for designing error-correcting codes whose geometry is simultaneously adapted to the sensing task and the noise channel do not exist. Here we establish that orbital-angular-momentum (OAM) encoding and Gottesman-Kitaev-Preskill (GKP) lattice geometry are structurally coupled: an OAM mode of topological charge ell induces a phase-space rotation θ_ell=ellπ/ell_{max}, corresponding to a family of twisted GKP stabilizer lattices. Using an end-to-end differentiable Strawberry Fields--TensorFlow circuit, we jointly optimise ell, the lattice aspect ratio r, and the finite-energy envelope ε to maximise quantum Fisher information subject to P_{rm err}leq10^{-3}. The optimum occurs at the fractional charge ell=1.5 (θ=67.5^circ), implementable with a half-integer spiral phase plate, which reduces P_{rm err} by 23.9times relative to the square-lattice baseline while leaving F_Q unchanged to within 0.2%. This surpasses the best integer value (ell=2, 15.7times) and arises from an exact 180^circ periodicity of the P_{rm err}(θ) landscape, confirmed analytically and numerically. We derive a transcendental balance equation for the optimal angle θ^*(η,γ,r) and prove that it decreases with both γ and η. A Shannon-inspired metrological capacity C=F_Qcdot(-ln P_{rm err}), maximised at ell=1.5 with a 41% gain over the square lattice, quantifies the joint sensitivity--fault-tolerance resource. These results establish a geometric design principle for noise-adaptive quantum sensors and a fully open-source differentiable template extensible to other bosonic code families.

  • 2 authors
·
May 13

QureRadEmbed: Structuring Radiological Similarity through Attribute and Reasoning Supervision

Radiological similarity depends on disease relationships and on fine details such as laterality, lobe, severity, size, and certainty. Broad biomedical similarity can overlook these qualifiers, particularly when several attributes vary together. We introduce QureRadEmbed, a 4B radiology-aware encoder trained with two complementary signals: RadSim supplies deterministic, attribute-decomposed ranking targets, while RadThought aligns reports with hierarchical evidence and reasoning descriptions. A three-stage curriculum combines these signals with report triplets, finding perturbations, and single- and cross-attribute contrasts. The final model achieves 0.996 mean ordering accuracy across ten controlled synthetic attributes and raises Spearman correlation with the designed joint-attribute targets from 0.501 to 0.976. On external findings-to-impression retrieval, Recall@1 reaches 10.5% on Open-I, 12.4% on testing XR, and 42.9% on testing CT, compared with 6.6%, 5.7%, and 31.4% for its backbone. Frozen embeddings support finding extraction with only 100 labeled testing-XR reports (macro-F1 0.481 versus 0.412 for the backbone). Whole-report comparison costs 8.8 seconds per 1,000 pairs in our benchmark, versus 2,755.1 seconds for the generative evaluator GREEN. Sentence-level comparison improves sensitivity to local discrepancies, although generative evaluation remains stronger on several expert-rated and subtle-error tasks. The results support reusable radiology-aware representations for search, structured report indexing, and efficient report comparison.

  • 4 authors
·
Sep 26

Fine-Grained Post-Training Quantization for Large Vision Language Models with Quantization-Aware Integrated Gradients

Large Vision Language Models (LVLMs) have achieved remarkable success in a range of downstream tasks that require multimodal interaction, but their capabilities come with substantial computational and memory overhead, which hinders practical deployment. Among numerous acceleration techniques, post-training quantization is a popular and effective strategy for reducing memory cost and accelerating inference. However, existing LVLM quantization methods typically measure token sensitivity at the modality level, which fails to capture the complex cross-token interactions and falls short in quantitatively measuring the quantization error at the token level. As tokens interact within the model, the distinction between modalities gradually diminishes, suggesting the need for fine-grained calibration. Inspired by axiomatic attribution in mechanistic interpretability, we introduce a fine-grained quantization strategy on Quantization-aware Integrated Gradients (QIG), which leverages integrated gradients to quantitatively evaluate token sensitivity and push the granularity from modality level to token level, reflecting both inter-modality and intra-modality dynamics. Extensive experiments on multiple LVLMs under both W4A8 and W3A16 settings show that our method improves accuracy across models and benchmarks with negligible latency overhead. For example, under 3-bit weight-only quantization, our method improves the average accuracy of LLaVA-onevision-7B by 1.60%, reducing the gap to its full-precision counterpart to only 1.33%. The code is available at https://github.com/ucas-xiang/QIG.

  • 9 authors
·
Mar 17

Continuous Language Diffusion as a Decoder-Interface Problem

Gaussian-corrupted sentence embeddings have no direct linguistic interpretation, yet continuous diffusion language models can generate fluent text from them. We study this puzzle through Embedded Language Flows (ELF) and identify a decoder-basin mechanism: our evidence suggests that denoising becomes reliable when trajectories reach regions where the native decoder can read stable tokens. We introduce a diagnostic protocol for denoisability, semantic recoverability, order sensitivity, decoder compatibility, and trajectory reliability. It exposes failures hidden by scalar metrics: low mean-squared error can discard linguistic content, low perplexity can reflect low-entropy collapse, and clean latent reconstruction can coexist with a narrow decoder basin. A decoder-margin bound explains why token recovery depends on margin and local decoder sensitivity, not latent error alone. Auditing public ELF checkpoints reveals an interface phase diagram: early predictions are weakly readable, mid-trajectory disagreement marks a competition region, and late predictions enter a high-margin decoder basin. Once inside, token realization is surprisingly simple on generated ELF states: frozen T5 (Text-to-Text Transfer Transformer) token-embedding lookup recovers 93--96% of native decoder decisions, and a single linear readout reaches 97.9% agreement at 32k samples, leaving an approx1.1--1.2 perplexity gap in a structured residual tail. Under conservative held-out gates, a margin rule exits roughly 17--28% earlier in denoising steps under an explicit diagnostic monitor. Boundary checks on LangFlow, BitstreamDiffusion, and the Continuous Latent Diffusion Language Model (Cola-DLM) show that the same interface questions remain meaningful when the state object and decoder change. Continuous and latent diffusion language models should therefore be evaluated as representation-decoder systems.

  • 2 authors
·
Jun 14

SwitchLingua: The First Large-Scale Multilingual and Multi-Ethnic Code-Switching Dataset

Code-switching (CS) is the alternating use of two or more languages within a conversation or utterance, often influenced by social context and speaker identity. This linguistic phenomenon poses challenges for Automatic Speech Recognition (ASR) systems, which are typically designed for a single language and struggle to handle multilingual inputs. The growing global demand for multilingual applications, including Code-Switching ASR (CSASR), Text-to-Speech (CSTTS), and Cross-Lingual Information Retrieval (CLIR), highlights the inadequacy of existing monolingual datasets. Although some code-switching datasets exist, most are limited to bilingual mixing within homogeneous ethnic groups, leaving a critical need for a large-scale, diverse benchmark akin to ImageNet in computer vision. To bridge this gap, we introduce LinguaMaster, a multi-agent collaboration framework specifically designed for efficient and scalable multilingual data synthesis. Leveraging this framework, we curate SwitchLingua, the first large-scale multilingual and multi-ethnic code-switching dataset, including: (1) 420K CS textual samples across 12 languages, and (2) over 80 hours of audio recordings from 174 speakers representing 18 countries/regions and 63 racial/ethnic backgrounds, based on the textual data. This dataset captures rich linguistic and cultural diversity, offering a foundational resource for advancing multilingual and multicultural research. Furthermore, to address the issue that existing ASR evaluation metrics lack sensitivity to code-switching scenarios, we propose the Semantic-Aware Error Rate (SAER), a novel evaluation metric that incorporates semantic information, providing a more accurate and context-aware assessment of system performance.

  • 8 authors
·
May 30, 2025

Breast Cancer Diagnosis in Two-View Mammography Using End-to-End Trained EfficientNet-Based Convolutional Network

Some recent studies have described deep convolutional neural networks to diagnose breast cancer in mammograms with similar or even superior performance to that of human experts. One of the best techniques does two transfer learnings: the first uses a model trained on natural images to create a "patch classifier" that categorizes small subimages; the second uses the patch classifier to scan the whole mammogram and create the "single-view whole-image classifier". We propose to make a third transfer learning to obtain a "two-view classifier" to use the two mammographic views: bilateral craniocaudal and mediolateral oblique. We use EfficientNet as the basis of our model. We "end-to-end" train the entire system using CBIS-DDSM dataset. To ensure statistical robustness, we test our system twice using: (a) 5-fold cross validation; and (b) the original training/test division of the dataset. Our technique reached an AUC of 0.9344 using 5-fold cross validation (accuracy, sensitivity and specificity are 85.13% at the equal error rate point of ROC). Using the original dataset division, our technique achieved an AUC of 0.8483, as far as we know the highest reported AUC for this problem, although the subtle differences in the testing conditions of each work do not allow for an accurate comparison. The inference code and model are available at https://github.com/dpetrini/two-views-classifier

  • 6 authors
·
Oct 1, 2021

Robust automatic brain vessel segmentation in 3D CTA scans using dynamic 4D-CTA data

In this study, we develop a novel methodology for annotating the brain vasculature using dynamic 4D-CTA head scans. By using multiple time points from dynamic CTA acquisitions, we subtract bone and soft tissue to enhance the visualization of arteries and veins, reducing the effort required to obtain manual annotations of brain vessels. We then train deep learning models on our ground truth annotations by using the same segmentation for multiple phases from the dynamic 4D-CTA collection, effectively enlarging our dataset by 4 to 5 times and inducing robustness to contrast phases. In total, our dataset comprises 110 training images from 25 patients and 165 test images from 14 patients. In comparison with two similarly-sized datasets for CTA-based brain vessel segmentation, a nnUNet model trained on our dataset can achieve significantly better segmentations across all vascular regions, with an average mDC of 0.846 for arteries and 0.957 for veins in the TopBrain dataset. Furthermore, metrics such as average directed Hausdorff distance (adHD) and topology sensitivity (tSens) reflected similar trends: using our dataset resulted in low error margins (adHD of 0.304 mm for arteries and 0.078 for veins) and high sensitivity (tSens of 0.877 for arteries and 0.974 for veins), indicating excellent accuracy in capturing vessel morphology. Our code and model weights are available online at https://github.com/alceballosa/robust-vessel-segmentation

  • 7 authors
·
Jan 30

SACQ: Structure-Aware Codebook Quantization for Ultra-Low-Bit Vision-Language-Action Models

Vision-Language-Action (VLA) models enable capable robot behavior, but their large memory footprint limits deployment on resource-constrained robotic platforms. Weight quantization is a natural remedy, yet post-training quantization (PTQ) recipes inherited from large language models degrade when applied to VLAs at ultra-low precision. Existing low-bit PTQ methods often fail to explicitly account for the structure of downstream operations and allocate precision without considering its effect on the policy actions. We introduce SACQ, an ultra- low-bit weight-only vector-codebook quantization framework for VLAs. SACQ combines (1) structure-aware codebook fitting with role-specific quadratic metrics that reflect input statistics and downstream sensitivity; (2) action-aware mixed-bit allocation based on the increase in final-action error as individual layers are compressed; and (3) two-stage post-quantization refinement that reassigns codeword indices with second-order error compensation and calibrates codebooks and row-group scales against the decoded action. Using GR00T N1.7, SACQ achieves 93.85% average success across four LIBERO suites at 1.5 bits per language/action weight while reducing model memory by 4.83x. With INT8 activation quantization and low-precision attention, it retains 93.55% success while running 1.51x faster than BF16. On SimplER, SACQ further achieves 63.76% and 52.27% success under Visual Matching and Variant Aggregation at 2 bits per language/action weight, compared to 58.90% and 53.45% for BF16, respectively.

  • 2 authors
·
Oct 29

Benchmarking Sensor-Fault Robustness in Forecasting

Cyber-physical system (CPS) forecasting models depend on sensor streams with noisy, biased, missing, or temporally misaligned readings, yet standard forecasting evaluation often selects models by nominal error without showing whether they remain robust under such faults. We introduce SensorFault-Bench, a CPS-grounded protocol that evaluates forecasting architectures and robustness-improvement methods through controlled synthetic stress tests of isolated input faults, together with an operational taxonomy of the methods. Across four real-world datasets and eight scored scenarios governed by a standardized severity model, it reports worst-scenario degradation, clean mean squared error (MSE), and worst-scenario fault-time MSE, separating relative robustness from absolute error. Explicit fault-training methods train on adjacent fault families disjoint from the scored scenarios. Empirically, forecasting architectures favored by clean MSE can degrade sharply under faults, and clean-MSE rankings can disagree with worst-scenario fault-time error rankings. Chronos-2, the evaluated zero-shot foundation model, matches or trails the last-value naive forecaster in clean MSE on the two single-target datasets and has the largest worst-scenario degradation on ETTh1 and Traffic, where all channels are forecast targets. For the evaluated robustness-improvement method set, paired deltas show selective degradation reductions: projected gradient descent adversarial training and randomized training lead where value faults dominate observed degradation, and fault augmentation leads on Traffic, where availability faults dominate. High degradation reveals fault sensitivity that clean MSE misses, while low degradation supports robustness only within the evaluated scenarios. The benchmark therefore screens forecasters before use in a specific deployment, which requires validation against its recorded faults.

  • 6 authors
·
May 11

MedPRMBench: A Fine-grained Benchmark for Process Reward Models in Medical Reasoning

Process-Level Reward Models (PRMs) are essential for guiding complex reasoning in large language models, yet existing PRM benchmarks cover only general domains such as mathematics, failing to address medical reasoning -- which is uniquely characterized by safety criticality, knowledge intensity, and diverse error patterns. Without a reliable medical PRM evaluation framework, we cannot quantify models' error detection capabilities in clinical reasoning, leaving their safety in real-world healthcare applications unverified. We propose MedPRMBench, the first process-level reward model benchmark for the medical domain. Built through a three-phase pipeline based on Clinical Reasoning Blueprints (CRBs), MedPRMBench systematically generates high-quality evaluation data from seven medical QA sources, covering 14 fine-grained error types across three categories (Simplicity, Soundness, and Sensitivity) with the first 4-level severity grading system to quantify clinical impact. The benchmark comprises 6{,}500 questions with 13{,}000 reasoning chains and 113{,}910 step-level labels, plus 6{,}879 questions for training. Our medical PRM baseline achieves an 87.1\% overall PRMScore -- substantially surpassing all baselines -- and serves as a plug-and-play verifier that improves downstream medical QA accuracy by 3.2--6.7 percentage points. Systematic evaluation spanning proprietary frontier models, open-source reasoning models, and medical-specialized models reveals critical weaknesses in current models' medical reasoning error detection capabilities, providing clear directions for future PRM improvement.

  • 8 authors
·
Apr 18

Structure-Preserving Quantum Circuit Architectures for Robot Kinematics

Structured spatial data require quantum encodings that preserve geometric relations, expose measurable observables, and remain implementable on finite-depth hardware. This work introduces a quantum representation and circuit architecture for rigid-body transformations and specializes it to Denavit--Hartenberg kinematics of serial open-chain manipulators. Each translational contribution is factorized into a classical metric magnitude and a signed unit direction encoded by a single-qubit Bloch vector, while parameterized rotations reproduce the ordered propagation of frame directions. A selector register prepares probabilities proportional to the contribution magnitudes, and the reduced state of a designated readout qubit encodes their normalized weighted sum. The retained classical scale then reconstructs the metric end-effector position. Two additional readout qubits encode terminal-frame axes, providing a compact and geometrically interpretable pose interface. At the ideal expectation-value level, measured Pauli observables reproduce the corresponding classical kinematic quantities. Alternative circuit architectures realize the same representation with different tradeoffs in qubit count, circuit depth, controlled operations, and measurement requirements. Validation on a serial manipulator yields numerically negligible position and orientation reconstruction errors under ideal simulation. Finite-shot simulations, noisy executions, transpilation analysis, and a hardware demonstration further characterize statistical error, noise sensitivity, and implementation overhead without asserting computational advantage.

  • 5 authors
·
Sep 13

When Quantization Breaks Memory: Recurrent-State Write-Back in Low-Precision Temporal Inference

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

  • 3 authors
·
Sep 2 2

Small Edits, Big Consequences: Telling Good from Bad Robustness in Large Language Models

Large language models (LLMs) now write code in settings where misreading a single word can break safety or cost money, yet we still expect them to overlook stray typos. To probe where useful robustness ends and harmful insensitivity begins, we compile 50 LeetCode problems and craft three minimal prompt perturbations that should vary in importance: (i) progressive underspecification deleting 10 % of words per step; (ii) lexical flip swapping a pivotal quantifier ("max" to "min"); and (iii) jargon inflation replacing a common noun with an obscure technical synonym. Six frontier models, including three "reasoning-tuned" versions, solve each mutated prompt, and their Python outputs are checked against the original test suites to reveal whether they reused the baseline solution or adapted. Among 11 853 generations we observe a sharp double asymmetry. Models remain correct in 85 % of cases even after 90 % of the prompt is missing, showing over-robustness to underspecification, yet only 54 % react to a single quantifier flip that reverses the task, with reasoning-tuned variants even less sensitive than their bases. Jargon edits lie in between, passing through 56 %. Current LLMs thus blur the line between harmless noise and meaning - changing edits, often treating both as ignorable. Masking salient anchors such as function names can force re - evaluation. We advocate evaluation and training protocols that reward differential sensitivity: stay steady under benign noise but adapt - or refuse - when semantics truly change.

  • 2 authors
·
Jul 14, 2025

The Drill-Down and Fabricate Test (DDFT): A Protocol for Measuring Epistemic Robustness in Language Models

Current language model evaluations measure what models know under ideal conditions but not how robustly they know it under realistic stress. Static benchmarks like MMLU and TruthfulQA cannot distinguish a model that lacks knowledge from one whose verification mechanisms collapse when information degrades or adversaries probe for weaknesses. We introduce the Drill-Down and Fabricate Test (DDFT), a protocol that measures epistemic robustness: a model's ability to maintain factual accuracy under progressive semantic compression and adversarial fabrication. We propose a two-system cognitive model comprising a Semantic System that generates fluent text and an Epistemic Verifier that validates factual accuracy. Our findings, based on evaluating 9 frontier models across 8 knowledge domains at 5 compression levels (1,800 turn-level evaluations), reveal that epistemic robustness is orthogonal to conventional design paradigms. Neither parameter count (r=0.083, p=0.832) nor architectural type (r=0.153, p=0.695) significantly predicts robustness, suggesting it emerges from training methodology and verification mechanisms distinct from current approaches. Error detection capability strongly predicts overall robustness (rho=-0.817, p=0.007), indicating this is the critical bottleneck. We find that flagship models exhibit brittleness despite their scale, while smaller models can achieve robust performance, challenging assumptions about the relationship between model size and reliability. The DDFT framework provides both theoretical foundation and practical tools for assessing epistemic robustness before deployment in critical applications.

  • 1 authors
·
Apr 2

POSIX: A Prompt Sensitivity Index For Large Language Models

Despite their remarkable capabilities, Large Language Models (LLMs) are found to be surprisingly sensitive to minor variations in prompts, often generating significantly divergent outputs in response to minor variations in the prompts, such as spelling errors, alteration of wording or the prompt template. However, while assessing the quality of an LLM, the focus often tends to be solely on its performance on downstream tasks, while very little to no attention is paid to prompt sensitivity. To fill this gap, we propose POSIX - a novel PrOmpt Sensitivity IndeX as a reliable measure of prompt sensitivity, thereby offering a more comprehensive evaluation of LLM performance. The key idea behind POSIX is to capture the relative change in loglikelihood of a given response upon replacing the corresponding prompt with a different intent-preserving prompt. We provide thorough empirical evidence demonstrating the efficacy of POSIX in capturing prompt sensitivity and subsequently use it to measure and thereby compare prompt sensitivity of various open-source LLMs. We find that merely increasing the parameter count or instruction tuning does not necessarily reduce prompt sensitivity whereas adding some few-shot exemplars, even just one, almost always leads to significant decrease in prompt sensitivity. We also find that alterations to prompt template lead to the highest sensitivity in the case of MCQ type tasks, whereas paraphrasing results in the highest sensitivity in open-ended generation tasks. The code for reproducing our results is open-sourced at https://github.com/kowndinya-renduchintala/POSIX.

  • 4 authors
·
Oct 3, 2024

Undersensitivity in Neural Reading Comprehension

Current reading comprehension models generalise well to in-distribution test sets, yet perform poorly on adversarially selected inputs. Most prior work on adversarial inputs studies oversensitivity: semantically invariant text perturbations that cause a model's prediction to change when it should not. In this work we focus on the complementary problem: excessive prediction undersensitivity, where input text is meaningfully changed but the model's prediction does not, even though it should. We formulate a noisy adversarial attack which searches among semantic variations of the question for which a model erroneously predicts the same answer, and with even higher probability. Despite comprising unanswerable questions, both SQuAD2.0 and NewsQA models are vulnerable to this attack. This indicates that although accurate, models tend to rely on spurious patterns and do not fully consider the information specified in a question. We experiment with data augmentation and adversarial training as defences, and find that both substantially decrease vulnerability to attacks on held out data, as well as held out attack spaces. Addressing undersensitivity also improves results on AddSent and AddOneSent, and models furthermore generalise better when facing train/evaluation distribution mismatch: they are less prone to overly rely on predictive cues present only in the training set, and outperform a conventional model by as much as 10.9% F1.

  • 5 authors
·
Feb 14, 2020

How Many Tries Does It Take? Iterative Self-Repair in LLM Code Generation Across Model Scales and Benchmarks

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.

  • 1 authors
·
Apr 11

Quantifying Language Models' Sensitivity to Spurious Features in Prompt Design or: How I learned to start worrying about prompt formatting

As large language models (LLMs) are adopted as a fundamental component of language technologies, it is crucial to accurately characterize their performance. Because choices in prompt design can strongly influence model behavior, this design process is critical in effectively using any modern pre-trained generative language model. In this work, we focus on LLM sensitivity to a quintessential class of meaning-preserving design choices: prompt formatting. We find that several widely used open-source LLMs are extremely sensitive to subtle changes in prompt formatting in few-shot settings, with performance differences of up to 76 accuracy points when evaluated using LLaMA-2-13B. Sensitivity remains even when increasing model size, the number of few-shot examples, or performing instruction tuning. Our analysis suggests that work evaluating LLMs with prompting-based methods would benefit from reporting a range of performance across plausible prompt formats, instead of the currently-standard practice of reporting performance on a single format. We also show that format performance only weakly correlates between models, which puts into question the methodological validity of comparing models with an arbitrarily chosen, fixed prompt format. To facilitate systematic analysis we propose FormatSpread, an algorithm that rapidly evaluates a sampled set of plausible prompt formats for a given task, and reports the interval of expected performance without accessing model weights. Furthermore, we present a suite of analyses that characterize the nature of this sensitivity, including exploring the influence of particular atomic perturbations and the internal representation of particular formats.

  • 4 authors
·
Oct 17, 2023

Understanding the Prompt Sensitivity

Prompt sensitivity, which refers to how strongly the output of a large language model (LLM) depends on the exact wording of its input prompt, raises concerns among users about the LLM's stability and reliability. In this work, we consider LLMs as multivariate functions and perform a first-order Taylor expansion, thereby analyzing the relationship between meaning-preserving prompts, their gradients, and the log probabilities of the model's next token. We derive an upper bound on the difference between log probabilities using the Cauchy-Schwarz inequality. We show that LLMs do not internally cluster similar inputs like smaller neural networks do, but instead disperse them. This dispersing behavior leads to an excessively high upper bound on the difference of log probabilities between two meaning-preserving prompts, making it difficult to effectively reduce to 0. In our analysis, we also show which types of meaning-preserving prompt variants are more likely to introduce prompt sensitivity risks in LLMs. In addition, we demonstrate that the upper bound is strongly correlated with an existing prompt sensitivity metric, PromptSensiScore. Moreover, by analyzing the logit variance, we find that prompt templates typically exert a greater influence on logits than the questions themselves. Overall, our results provide a general interpretation for why current LLMs can be highly sensitive to prompts with the same meaning, offering crucial evidence for understanding the prompt sensitivity of LLMs. Code for experiments is available at https://github.com/ku-nlp/Understanding_the_Prompt_Sensitivity.

  • 2 authors
·
Apr 19

Building Safe and Reliable AI systems for Safety Critical Tasks with Vision-Language Processing

Although AI systems have been applied in various fields and achieved impressive performance, their safety and reliability are still a big concern. This is especially important for safety-critical tasks. One shared characteristic of these critical tasks is their risk sensitivity, where small mistakes can cause big consequences and even endanger life. There are several factors that could be guidelines for the successful deployment of AI systems in sensitive tasks: (i) failure detection and out-of-distribution (OOD) detection; (ii) overfitting identification; (iii) uncertainty quantification for predictions; (iv) robustness to data perturbations. These factors are also challenges of current AI systems, which are major blocks for building safe and reliable AI. Specifically, the current AI algorithms are unable to identify common causes for failure detection. Furthermore, additional techniques are required to quantify the quality of predictions. All these contribute to inaccurate uncertainty quantification, which lowers trust in predictions. Hence obtaining accurate model uncertainty quantification and its further improvement are challenging. To address these issues, many techniques have been proposed, such as regularization methods and learning strategies. As vision and language are the most typical data type and have many open source benchmark datasets, this thesis will focus on vision-language data processing for tasks like classification, image captioning, and vision question answering. In this thesis, we aim to build a safeguard by further developing current techniques to ensure the accurate model uncertainty for safety-critical tasks.

  • 1 authors
·
Aug 6, 2023

On the Limits of LLM Adaptability: Impact of Model-Internalized Priors on Annotation Task Performance

Large Language Models (LLMs) are increasingly used for zero-shot annotation and LLM-as-a-judge tasks, yet their reliability hinges on how model-internalized priors interact with user-provided instructions. We investigate three dimensions of this interaction: (1) how an LLM's familiarity with data and task definitions affects performance, (2) the extent to which additional information in prompts can correct zero-shot errors ("decision stickiness"), and (3) model susceptibility to misaligned task definitions. Through experiments on toxicity detection across diverse datasets (spanning social media, gaming, news, and forums) using both dense and mixture-of-experts models, we find that nearly two-thirds of zero-shot errors are resistant to correction, with an overall rescue rate (fraction of initial errors corrected by prompting) of only 34.8%. High-confidence errors prove especially resistant to correction. When given misaligned definitions, LLMs follow them while maintaining confidence levels unchanged from the aligned condition. Crucially, we introduce Definition-Specific Familiarity (DSF), which measures alignment between a model's internal concept and the task definition. After controlling for dataset-level confounds, DSF shows a positive association with model performance (partial r = +0.41), while three distinct memorization metrics (ROUGE-L, BERTScore, and embedding cosine similarity) all fail to show a positive association. These findings show the limitations of prompt-based correction in annotation tasks, highlighting the importance of definition alignment over text-level memorization.

Evaluating LLMs at Detecting Errors in LLM Responses

With Large Language Models (LLMs) being widely used across various tasks, detecting errors in their responses is increasingly crucial. However, little research has been conducted on error detection of LLM responses. Collecting error annotations on LLM responses is challenging due to the subjective nature of many NLP tasks, and thus previous research focuses on tasks of little practical value (e.g., word sorting) or limited error types (e.g., faithfulness in summarization). This work introduces ReaLMistake, the first error detection benchmark consisting of objective, realistic, and diverse errors made by LLMs. ReaLMistake contains three challenging and meaningful tasks that introduce objectively assessable errors in four categories (reasoning correctness, instruction-following, context-faithfulness, and parameterized knowledge), eliciting naturally observed and diverse errors in responses of GPT-4 and Llama 2 70B annotated by experts. We use ReaLMistake to evaluate error detectors based on 12 LLMs. Our findings show: 1) Top LLMs like GPT-4 and Claude 3 detect errors made by LLMs at very low recall, and all LLM-based error detectors perform much worse than humans. 2) Explanations by LLM-based error detectors lack reliability. 3) LLMs-based error detection is sensitive to small changes in prompts but remains challenging to improve. 4) Popular approaches to improving LLMs, including self-consistency and majority vote, do not improve the error detection performance. Our benchmark and code are provided at https://github.com/psunlpgroup/ReaLMistake.

  • 15 authors
·
Apr 4, 2024

AskToAct: Enhancing LLMs Tool Use via Self-Correcting Clarification

Large language models (LLMs) have demonstrated remarkable capabilities in tool learning. In real-world scenarios, user queries are often ambiguous and incomplete, requiring effective clarification. However, existing interactive clarification approaches face two critical limitations: reliance on manually constructed datasets and lack of error correction mechanisms during multi-turn clarification. We present AskToAct, which addresses these challenges by exploiting the structural mapping between queries and their tool invocation solutions. Our key insight is that tool parameters naturally represent explicit user intents. By systematically removing key parameters from queries while retaining them as ground truth, we enable automated construction of high-quality training data. We further enhance model robustness by fine-tuning on error-correction augmented data using selective masking mechanism, enabling dynamic error detection during clarification interactions. Comprehensive experiments demonstrate that AskToAct significantly outperforms existing approaches, achieving above 79% accuracy in recovering critical unspecified intents and enhancing clarification efficiency by an average of 48.34% while maintaining high accuracy in tool invocation. Our framework exhibits robust performance across varying complexity levels and successfully generalizes to entirely unseen APIs without additional training, achieving performance comparable to GPT-4 with substantially fewer computational resources.

  • 9 authors
·
Mar 3, 2025

RISED: A Pre-Deployment Evaluation Framework for High-Stakes AI Decision-Support Systems, with Application to Healthcare

Clinical decision-support systems are expert systems whose recommendations clinicians act on directly, yet they are usually cleared on one aggregate accuracy number from a held-out test set. That number says nothing about input reliability under encoding shifts, subgroup gaps, threshold sensitivity, or operational feasibility. We present RISED, a pre-deployment evaluation framework operationalising five dimensions (Reliability, Inclusivity, Sensitivity, Equity, Deployability) through BCa bootstrap 95% confidence intervals, literature-grounded thresholds, and Holm-Bonferroni-corrected PASS / FAIL / INCONCLUSIVE verdicts; Equity is a proxy-dependence diagnostic rather than a gating test. Applied to seven cohorts spanning 35 years (n from 303 to 99,492), RISED surfaces failures invisible to AUROC: on Diabetes 130, Reliability passes by three orders of magnitude (PSS = 0.0004) while Inclusivity (AUC parity gap = 0.262) and Sensitivity (max threshold-flip rate 49.1%) fail decisively; both NHIS cohorts reproduce this. NHANES 2021-2023, with a complete feature profile, achieves INCONCLUSIVE verdicts; BRFSS 2024 produces the suite's most severe Sensitivity failure (max threshold-flip rate 64.2%) after instrument rotation removed hypertension and cholesterol. The pattern recurs on credit- and income-prediction cohorts, confirming domain-agnosticity; a multi-model check shows the failures are data-driven, not model-specific. RISED ships as an open-source Python package complementing TRIPOD+AI, FUTURE-AI, and Fairlearn with the structured numerical evidence those standards require but do not prescribe.

  • 5 authors
·
May 29

Can Large Multimodal Models Actively Recognize Faulty Inputs? A Systematic Evaluation Framework of Their Input Scrutiny Ability

Large Multimodal Models (LMMs) have witnessed remarkable growth, showcasing formidable capabilities in handling intricate multimodal tasks with exceptional performance. Recent research has underscored the inclination of large language models to passively accept defective inputs, often resulting in futile reasoning on invalid prompts. However, the same critical question of whether LMMs can actively detect and scrutinize erroneous inputs still remains unexplored. To address this gap, we introduce the Input Scrutiny Ability Evaluation Framework (ISEval), which encompasses seven categories of flawed premises and three evaluation metrics. Our extensive evaluation of ten advanced LMMs has identified key findings. Most models struggle to actively detect flawed textual premises without guidance, which reflects a strong reliance on explicit prompts for premise error identification. Error type affects performance: models excel at identifying logical fallacies but struggle with surface-level linguistic errors and certain conditional flaws. Modality trust varies-Gemini 2.5 pro and Claude Sonnet 4 balance visual and textual info, while aya-vision-8b over-rely on text in conflicts. These insights underscore the urgent need to enhance LMMs' proactive verification of input validity and shed novel insights into mitigating the problem. The code is available at https://github.com/MLGroupJLU/LMM_ISEval.

  • 5 authors
·
Aug 5, 2025 2

Label-Wording Augmentation in a Typed-Decision Encoder: Gains on Unfamiliar Words, Not on Abbreviations or Codes

Typed-decision models score options that the caller supplies at request time, so their accuracy depends on label wording that the model's developer does not control. We compare two releases of a 307M-parameter multilingual cross-encoder, Ru-Jev, trained on thirteen Russian-language tasks; the later release adds an augmentation that presents labels in several surface forms. Holding questions fixed and varying only how eighteen routing labels are worded, we evaluate ten label vocabularies, produced by three separate processes and checked for overlap with the training data, with five candidates per question and, for eight of them, also with eighteen. On held-out vocabularies made of ordinary or borrowed words (English-derived jargon, office slang, department names), the augmented release is more accurate in every setting, by up to 0.24. Eleven of these fourteen gains survive a Holm correction (slang with eighteen candidates and descriptive sentences with five do not), and for jargon on all labels the label-level interval excludes zero in both settings. On abbreviations and opaque codes it gives no usable gain: on abbreviations it is not better, and worse on the clean slice, and on opaque codes both releases stay at or below chance once labels related to training options are removed. In most cells where accuracy rises, the risk-coverage area falls, but with eighteen candidates confident errors rise on jargon and slang. On two datasets neither release saw, accuracy moves by -8.4 and +5.6 points. We also report four evaluation hazards from comparing the two releases.

  • 1 authors
·
Nov 4 1

Semantic Sensitivities and Inconsistent Predictions: Measuring the Fragility of NLI Models

Recent studies of the emergent capabilities of transformer-based Natural Language Understanding (NLU) models have indicated that they have an understanding of lexical and compositional semantics. We provide evidence that suggests these claims should be taken with a grain of salt: we find that state-of-the-art Natural Language Inference (NLI) models are sensitive towards minor semantics preserving surface-form variations, which lead to sizable inconsistent model decisions during inference. Notably, this behaviour differs from valid and in-depth comprehension of compositional semantics, however does neither emerge when evaluating model accuracy on standard benchmarks nor when probing for syntactic, monotonic, and logically robust reasoning. We propose a novel framework to measure the extent of semantic sensitivity. To this end, we evaluate NLI models on adversarially generated examples containing minor semantics-preserving surface-form input noise. This is achieved using conditional text generation, with the explicit condition that the NLI model predicts the relationship between the original and adversarial inputs as a symmetric equivalence entailment. We systematically study the effects of the phenomenon across NLI models for in- and out-of- domain settings. Our experiments show that semantic sensitivity causes performance degradations of 12.92% and 23.71% average over in- and out-of- domain settings, respectively. We further perform ablation studies, analysing this phenomenon across models, datasets, and variations in inference and show that semantic sensitivity can lead to major inconsistency within model predictions.

  • 3 authors
·
Jan 25, 2024

Understanding the Effect of Noise in LLM Training Data with Algorithmic Chains of Thought

During both pretraining and fine-tuning, Large Language Models (LLMs) are trained on trillions of tokens of text of widely varying quality. Both phases of training typically involve heuristically filtering out ``low-quality'' or noisy training samples, yet little is known quantitatively about how the type or intensity of noise affects downstream performance. In this work, we study how noise in chain of thought (CoT) impacts task performance in the highly-controlled setting of algorithmically solvable tasks. First, we develop the Traced Integer (TInt) framework to generate highly customizable noised execution traces for any arithmetic function on lists of integers. We then define two types of noise: static noise, a local form of noise which is applied after the CoT trace is computed, and dynamic noise, a global form of noise which propagates errors in the trace as it is computed. We then evaluate the test performance of pretrained models both prompted and fine-tuned on noised datasets with varying levels of dataset contamination and intensity. We find fine-tuned models are extremely robust to high levels of static noise but struggle significantly more with lower levels of dynamic noise. In contrast, few-shot prompted models appear more sensitive to even static noise. We conclude with a discussion of how our findings impact noise filtering best-practices, in particular emphasizing the importance of removing samples containing destructive dynamic noise with global errors.

  • 2 authors
·
Feb 6, 2024

The Devil in the Details: Emergent Misalignment, Format and Coherence in Open-Weights LLMs

Prior work has shown that fine-tuning models on a narrow domain with misaligned data can lead to broad misalignment - a phenomenon termed "emergent misalignment" (Betley et al. 2025). While all tested models were susceptible to emergent misalignment, some models showed more resistance than others. Specifically the Qwen-2.5 family proved to be relatively resistant, while GPT-4o exhibited the strongest misalignment. In this paper we evaluate if current-generation open-weights models exhibit similar resistance to the Qwen-2.5 family and measure misalignment robustness over a range of model architectures and scales. We replicate the effect across nine modern open-weights models (Gemma 3 and Qwen 3 families, 1B-32B parameters). Models fine-tuned on insecure code generation show a 0.68% misalignment rate (compared to 0.07% for base models), matching the lower end of prior open-model results but dramatically lower than GPT-4o's 20%. We identify a critical format-dependent vulnerability: requiring JSON output doubles misalignment rates compared to natural language prompts (0.96% vs 0.42%). This suggests that structural constraints may bypass safety training by reducing the model's 'degrees of freedom' to refuse. These findings confirm emergent misalignment as a reproducible phenomenon in modern open-weights models, with rates substantially lower than observed in proprietary systems.

  • 1 authors
·
Nov 25, 2025

Meta-Tool: Efficient Few-Shot Tool Adaptation for Small Language Models

Can small language models achieve strong tool-use performance without complex adaptation mechanisms? This paper investigates this question through Meta-Tool, a controlled empirical study comparing hypernetwork-based LoRA adaptation against carefully designed few-shot prompting. Using a Llama-3.2-3B-Instruct backbone, we evaluate four adaptation mechanisms--few-shot prompting, documentation encoding, hypernetwork-generated LoRA weights, and value-guided beam search--across four diverse benchmarks: Gorilla APIBench, Spider 2.0, WebArena, and InterCode. Our central finding is a well-supported negative result: despite generating non-trivial weight matrices, the 227.8M-parameter hypernetwork provides no measurable improvement over few-shot prompting alone. Comprehensive ablation studies reveal that few-shot examples contribute +21.5% to performance and documentation contributes +5.0%, while the hypernetwork adds 0%. A 3B model with well-designed prompts achieves 79.7% of GPT-5's average performance at 10 times lower latency. Error analysis across 722 failure cases spanning all shot counts (0--5) shows that at the 5-shot configuration (106 failures), failure modes are task-dependent: schema-heavy tasks (Spider 2.0, WebArena) show near-zero format errors with remaining failures semantic, while format errors dominate on Gorilla (100%) and InterCode (70%). These findings redirect practitioners toward prompt engineering and example curation rather than complex adaptation architectures.

  • 1 authors
·
Apr 21

Intervention anchors and scientific verification in synthetic vascular predictive representations

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

  • 7 authors
·
Oct 7

IRepair: An Intent-Aware Approach to Repair Data-Driven Errors in Large Language Models

Not a day goes by without hearing about the impressive feats of large language models (LLMs), and equally, not a day passes without hearing about their challenges. LLMs are notoriously vulnerable to biases in their dataset, leading to issues such as toxicity. While domain-adaptive training has been employed to mitigate these issues, these techniques often address all model parameters indiscriminately during the repair process, resulting in poor repair quality and reduced model versatility. In this paper, we introduce a novel dynamic slicing-based intent-aware LLM repair strategy, IRepair. This approach selectively targets the most error-prone sections of the model for repair. Specifically, we propose dynamically slicing the model's most sensitive layers that require immediate attention, concentrating repair efforts on those areas. This method enables more effective repairs with potentially less impact on the model's overall performance by altering a smaller portion of the model. We evaluated our technique on three models from the GPT2 and GPT-Neo families, with parameters ranging from 800M to 1.6B, in a toxicity mitigation setup. Our results show that IRepair repairs errors 43.6% more effectively while causing 46% less disruption to general performance compared to the closest baseline, direct preference optimization. Our empirical analysis also reveals that errors are more concentrated in a smaller section of the model, with the top 20% of layers exhibiting 773% more error density than the remaining 80\%. This highlights the need for selective repair. Additionally, we demonstrate that a dynamic selection approach is essential for addressing errors dispersed throughout the model, ensuring a robust and efficient repair.

  • 4 authors
·
Feb 10, 2025

Towards Characterizing Scientific Image Utility and Upgradability

Scientific images function as critical evidence in research communication, yet their integrity faces unprecedented threats from AI-generated content that introduces subtle but consequential errors. Existing evaluation paradigms prove inadequate: perceptual quality metrics poorly correlate with scientific validity, while language models lack domain-specific verification capabilities. To address this gap, we propose the Scientific Image Utility and Upgradability Assessment (SIU^2A) framework, which introduces two complementary dimensions for scientific image evaluation. Utility encompasses error detection (identifying scientific inaccuracies) and correction feasibility (assessing whether errors can be reliably repaired). Upgradability measures the quality of correction. We categorize scientific image corruption into four fundamental types: Detail Distortion, Incompleteness, False Content, and Entity Confusion. Based on this taxonomy, we construct SIU^2A-Benchmark, a dataset with expert annotations for error identification and repair. The framework implements a two-stage evaluation protocol: the Utility stage evaluates error detection capability and repair instruction generation, while the Upgradability stage assesses whether corrections faithfully restore scientific validity without compromising existing accurate information. Experiments reveal that current multimodal systems exhibit significant limitations in both scientific error assessment and faithful correction, exposing a fundamental gap between visual perception and scientific usability.

  • 9 authors
·
Sep 8

Subtle Errors Matter: Preference Learning via Error-injected Self-editing

Large Language Models (LLMs) have exhibited strong mathematical reasoning and computational prowess, tackling tasks ranging from basic arithmetic to advanced competition-level problems. However, frequently occurring subtle errors, such as miscalculations or incorrect substitutions, limit the models' full mathematical potential. Existing studies to improve mathematical ability typically involve distilling reasoning skills from stronger LLMs or applying preference learning to step-wise response pairs. Although these methods leverage samples of varying granularity to mitigate reasoning errors, they overlook the frequently occurring subtle errors. A major reason is that sampled preference pairs involve differences unrelated to the errors, which may distract the model from focusing on subtle errors. In this work, we propose a novel preference learning framework called eRror-Injected Self-Editing (RISE), which injects predefined subtle errors into partial tokens of correct solutions to construct hard pairs for error mitigation. In detail, RISE uses the model itself to edit a small number of tokens in the solution, injecting designed subtle errors. Then, pairs composed of self-edited solutions and their corresponding correct ones, along with pairs of correct and incorrect solutions obtained through sampling, are used together for subtle error-aware DPO training. Compared with other preference learning methods, RISE further refines the training objective to focus on predefined errors and their tokens, without requiring fine-grained sampling or preference annotation. Extensive experiments validate the effectiveness of RISE, with preference learning on Qwen2-7B-Instruct yielding notable improvements of 3.0% on GSM8K and 7.9% on MATH.

  • 10 authors
·
Oct 9, 2024

Discovering Knowledge Deficiencies of Language Models on Massive Knowledge Base

Large language models (LLMs) possess impressive linguistic capabilities but often fail to faithfully retain factual knowledge, leading to hallucinations and unreliable outputs. Understanding LLMs' knowledge deficiencies by exhaustively evaluating against full-scale knowledge bases is computationally prohibitive, especially for closed-weight models. We propose stochastic error ascent (SEA), a scalable and efficient framework for discovering knowledge deficiencies (errors) in closed-weight LLMs under a strict query budget. Rather than naively probing all knowledge candidates, SEA formulates error discovery as a stochastic optimization process: it iteratively retrieves new high-error candidates by leveraging the semantic similarity to previously observed failures. To further enhance search efficiency and coverage, SEA employs hierarchical retrieval across document and paragraph levels, and constructs a relation directed acyclic graph to model error propagation and identify systematic failure modes. Empirically, SEA uncovers 40.7x more knowledge errors than Automated Capability Discovery and 26.7% more than AutoBencher, while reducing the cost-per-error by 599x and 9x, respectively. Human evaluation confirms the high quality of generated questions, while ablation and convergence analyses validate the contribution of each component in SEA. Further analysis on the discovered errors reveals correlated failure patterns across LLM families and recurring deficits, highlighting the need for better data coverage and targeted fine-tuning in future LLM development.

  • 9 authors
·
Mar 30, 2025 2

Auditing Self-Evolution in Financial Agents: Capability Gains, Security Drift, and Execution-Interface Mismatch

Self-evolving agents turn experience into reusable skills, workflows, or memories, but post-evolution accuracy alone does not show whether learned behavior preserves previously correct behavior or security. We audit SkillOpt, Agent Workflow Memory (AWM), and ReasoningBank in simulated e-banking using matched benign acquisition trajectories, sealed evaluation endpoints, execution-grounded checks, and independent state replay. On Qwen 3.7 Flash, SkillOpt raises benign utility from 0.741 to 0.837 while exposure to injected content rises from 0.820 to 0.943. Conditional attack success after exposure falls from 0.605 to 0.562, yet overall attack success rate (ASR) rises from 0.496 to 0.530 and unauthorized financial state changes rise to 0.685. Across three independently evolved lineages, capability, exposure, and unauthorized-state changes increase in all three, whereas ASR increases in only two. ReasoningBank raises utility to 0.859 without increasing aggregate ASR, although unauthorized state changes remain slightly above Static. AWM reveals a separate evaluation hazard: a literal WebArena text-action envelope disrupts tool execution in our native function-calling executor. In a post-hoc sensitivity test, removing only that envelope restores utility from 0.319 to 0.756, while exposure rises from 0.299 to 0.909 and ASR from 0.195 to 0.575. Auditing self-evolving financial agents therefore requires tracking regressions, attack-surface contact, unauthorized financial-state change, and artifact-executor compatibility, not accuracy alone.

  • 2 authors
·
Aug 17

PyMETA: Evaluating Student Code Diagnosis on and Beyond the First Execution Error

Large language models can diagnose a student program from its code, problem statement, and reference solution. Evaluating this ability requires a clear definition of what counts as the correct diagnosis. We introduce PyMETA, a Python error dataset with 48,646 student submissions to 155 problems. Every submission has a single label for the first execution error identified by an Online Judge, or No Error when the program passes all tests. A targeted subset of 97 submissions also has expert labels collected through iterative repair and re-execution. The taxonomy has three levels; its most detailed level contains 14 labels, including No Error, Logic Error, named Python exceptions, and an Other Errors category. We evaluate two finetuned models and two groups of prompted LLMs: four earlier models and four recent models. When evaluated against the first execution error, the recent prompted models reach 87.5--93.8% macro F1, above the strongest finetuned baseline at 80.6%. This is the opposite of the comparison obtained with the earlier prompted models. On the 97-item expert subset, however, exact-set match is only 43.3--48.5%, although sample F1 is about 79--81%. Output format also matters. On the same 45 audited submissions whose expert label sets do not contain Logic Error, none of the four recent models returns that label under single-error prompting, but 46.7--57.8% of their multi-error outputs include it, usually after an explicit-error label. The results show that model rankings and claims about label bias depend on the meaning of the gold label, the number of labels a model may return, and the scoring rule.

  • 6 authors
·
Sep 14

Don't Take the Premise for Granted: Evaluating the Premise Critique Ability of Large Language Models

Large language models (LLMs) have witnessed rapid advancements, demonstrating remarkable capabilities. However, a notable vulnerability persists: LLMs often uncritically accept flawed or contradictory premises, leading to inefficient reasoning and unreliable outputs. This emphasizes the significance of possessing the Premise Critique Ability for LLMs, defined as the capacity to proactively identify and articulate errors in input premises. Most existing studies assess LLMs' reasoning ability in ideal settings, largely ignoring their vulnerabilities when faced with flawed premises. Thus, we introduce the Premise Critique Bench (PCBench), designed by incorporating four error types across three difficulty levels, paired with multi-faceted evaluation metrics. We conducted systematic evaluations of 15 representative LLMs. Our findings reveal: (1) Most models rely heavily on explicit prompts to detect errors, with limited autonomous critique; (2) Premise critique ability depends on question difficulty and error type, with direct contradictions being easier to detect than complex or procedural errors; (3) Reasoning ability does not consistently correlate with the premise critique ability; (4) Flawed premises trigger overthinking in reasoning models, markedly lengthening responses due to repeated attempts at resolving conflicts. These insights underscore the urgent need to enhance LLMs' proactive evaluation of input validity, positioning premise critique as a foundational capability for developing reliable, human-centric systems. The code is available at https://github.com/MLGroupJLU/Premise_Critique.

  • 4 authors
·
May 29, 2025

ErrorMap and ErrorAtlas: Charting the Failure Landscape of Large Language Models

Large Language Models (LLM) benchmarks tell us when models fail, but not why they fail. A wrong answer on a reasoning dataset may stem from formatting issues, calculation errors, or dataset noise rather than weak reasoning. Without disentangling such causes, benchmarks remain incomplete and cannot reliably guide model improvement. We introduce ErrorMap, the first method to chart the sources of LLM failure. It extracts a model's unique "failure signature", clarifies what benchmarks measure, and broadens error identification to reduce blind spots. This helps developers debug models, aligns benchmark goals with outcomes, and supports informed model selection. ErrorMap works on any model or dataset with the same logic. Applying our method to 35 datasets and 83 models we generate ErrorAtlas, a taxonomy of model errors, revealing recurring failure patterns. ErrorAtlas highlights error types that are currently underexplored in LLM research, such as omissions of required details in the output and question misinterpretation. By shifting focus from where models succeed to why they fail, ErrorMap and ErrorAtlas enable advanced evaluation - one that exposes hidden weaknesses and directs progress. Unlike success, typically measured by task-level metrics, our approach introduces a deeper evaluation layer that can be applied globally across models and tasks, offering richer insights into model behavior and limitations. We make the taxonomy and code publicly available with plans to periodically update ErrorAtlas as new benchmarks and models emerge.

  • 5 authors
·
Feb 16

Evaluating Commercial AI Chatbots as News Intermediaries

AI chatbots are rapidly shaping how people encounter the news, yet no prior study has systematically measured how accurately these systems, with their proprietary search integrations and retrieval-synthesis pipelines, handle emerging facts across languages and regions. We present a 14-day (February 9-22, 2026) evaluation of six AI chatbots (Gemini 3 Flash and Pro, Grok 4, Claude 4.5 Sonnet, GPT-5 and GPT-4o mini) on 2,100 factual questions derived from same-day BBC News reporting across six regional services (US & Canada, Arabic, Afrique, Hindi, Russian, Turkish). The best systems achieve over 90% multiple-choice accuracy on questions about events reported hours earlier. The same systems, however, lose 11-13% under free-response evaluation, and 16-17% across the cohort. We further characterize three failure patterns. First, every model achieves its lowest accuracy on Hindi (79% vs. 89-91% elsewhere) and citations indicate an Anglophone retrieval bias (e.g., models answering Hindi queries cite English Wikipedia more than any Hindi outlet). Second, retrieval, not reasoning, failures drive over 70% of all errors. When models retrieve a correct source, they often extract the correct answer; the problem is to land on the right source in the first place. Third, models achieving 88-96% accuracy on well-formed questions drop to 19-70% when questions contain subtle false premises, with the most vulnerable model accepting fabricated facts 64% of the time. We also identify a detection-accuracy paradox: the best false-premise detector ranks second in adversarial accuracy (abstention rate), while a weaker detector ranks first, showing that premise detection and answer recovery are partially independent capabilities. Overall, these suggest that high accuracy can mask systematic regional inequity, near-total dependence on retrieval infrastructure, and vulnerability to imperfect queries real users pose.

  • 8 authors
·
May 20

Evaluating LLM Uncertainty in Long-Form Generation Using Deterministic Ground Truth

As LLMs generate increasingly long outputs, effective uncertainty estimation must identify errors at fine-grained levels rather than discard entire responses. While such methods exist, evaluating uncertainty at any resolution (token to an entire generation) is challenging and highly sensitive to label imperfections, making zero-noise benchmarks essential; yet, long-form generation benchmarks tend to rely on fallible labels rather than deterministic ground truth. We introduce Single-answer Atomic Long-form Target (SALT), a benchmark of six procedurally generated tasks with single deterministic long textual ground truths, enabling unit-level evaluation of correctness, calibration, and ranking without external judges. Equipped with SALT, our analysis of 50+ LLMs reveals key insights: We identify which confidence functions dominate each uncertainty aspect and show that confidence ranking largely breaks at atomic resolution, even when clearer separability emerges at coarser line-level units. SALT further enables controlled atom-level interventions throughout generation, revealing two separable drivers of future errors: propagation from corrupted prefixes, dominated by global context correctness, and bounded degradation from increasing answer-context length. Finally, we demonstrate that reasoning, via Chain-of-Thought prompting or internalized through training, introduces a trade-off, improving accuracy while degrading confidence ranking. These findings directly impact risk-critical applications requiring reliable error identification and mitigation.

  • 3 authors
·
Jul 3