Daily Papers

Text-conditioned motion generation is a promising interface for programming humanoid robots, yet current generators are often trained on human motion datasets retargeted to robot morphologies. Although such data provides rich semantic and kinematic priors, it fails to capture the nuances of whole-body tracking controllers, including balance, contact dynamics, actuation limits, and controller-specific failure modes. As a result, generated motions can be semantically plausible but difficult or impossible for the robot to execute. We introduce TEXEDO, a test-time scaling framework for humanoid motion generation that improves motion quality without requiring a stronger underlying generator. Given a text prompt, TEXEDO samples multiple candidate motions from a pretrained text-conditioned generator and selects the best motion that is both executable and task-aligned. The reward model combines a dynamic feasibility verifier, distilled from whole-body tracking rollouts to predict physical executability, with a semantic alignment verifier that measures text-motion alignment in a learned co-embedding space. Our pipeline treats dynamic feasibility as a hard constraint and semantic alignment as the selection objective within the feasible set. Through large-scale simulation studies and real-world deployment on a Unitree G1 humanoid robot, we show that TEXEDO consistently improves both tracking fidelity and text alignment. These results demonstrate that grounded verification is an effective path toward deployable language-guided humanoid motion generation. Project website: https://jianuocao.github.io/TEXEDO/

Recent advances in whole-body robot control have enabled humanoid and legged robots to perform increasingly agile and coordinated motions. However, standardized benchmarks for evaluating these capabilities in real-world settings, and in direct comparison to humans, remain scarce. Existing evaluations often rely on pre-collected human motion datasets or simulation-based experiments, which limit reproducibility, overlook hardware factors, and hinder fair human-robot comparisons. We present Switch-JustDance, a low-cost and reproducible benchmarking pipeline that leverages motion-sensing console games, Just Dance on the Nintendo Switch, to evaluate robot whole-body control. Using Just Dance on the Nintendo Switch as a representative platform, Switch-JustDance converts in-game choreography into robot-executable motions through streaming, motion reconstruction, and motion retargeting modules and enables users to evaluate controller performance through the game's built-in scoring system. We first validate the evaluation properties of Just Dance, analyzing its reliability, validity, sensitivity, and potential sources of bias. Our results show that the platform provides consistent and interpretable performance measures, making it a suitable tool for benchmarking embodied AI. Building on this foundation, we benchmark three state-of-the-art humanoid whole-body controllers on hardware and provide insights into their relative strengths and limitations.

Video generation models have made impressive strides in synthesizing visually compelling content, yet their outputs remain confined to the virtual domain. A natural question follows: how well do these models reflect the physical world when their generated videos leave the screen and enter reality? We propose robotic manipulation as a concrete, measurable window onto this question: if a model has truly internalized physical laws, the motion it depicts should translate into executable robot behavior. We introduce Dream.exe, an evaluation framework that operationalizes this criterion through a video-to-execution pipeline. Given a scene image and a task description, Dream.exe synthesizes a manipulation video, converts the generated motion into robot trajectories, and executes them in a physics simulator, yielding a grounding signal that purely visual metrics cannot offer. Using this pipeline, we evaluate 8 models spanning frontier closed-source generators, open-source generators, and robot-specific models. Our benchmark covers 101 manually curated manipulation tasks at three levels of physical complexity, measured across visual quality, trajectory fidelity, and execution success. Encouragingly, several models achieve measurable execution success, suggesting that generative priors learned from internet-scale data already encode meaningful physical knowledge. Yet visual quality proves a poor predictor of executability, exposing a dimension of model capability that standard visual evaluations do not capture. Dream.exe will be open-sourced at https://github.com/showlab/Dream.exe.

Captured human-object interactions provide rich supervision for humanoid loco-manipulation, but they are sparse, heterogeneous, and not directly executable by robots. We introduce InterMimicGen, a self-evolving motion-imitation framework in which robot motion data and a tracking policy improve each other. First, we consolidate motion-captured human-object interaction datasets and retarget them into humanoid robot references while preserving whole-body coordination and dexterous hand-object relationships. This produces a large and diverse humanoid robot reference collection for dexterous whole-body loco-manipulation. Second, we train a physics-based generalist tracker that executes these references in simulation on a humanoid with dexterous hands, covering a scale and diversity beyond prior humanoid tracking systems for loco-manipulation. Third, we close a data flywheel: each round makes small, task-preserving changes to where an interaction takes place and how the body performs it, fine-tunes the tracker on them, and keeps only the variants whose simulated execution completes the task, which seed the next round. With more iterations, these small edits compound into broader coverage around the sparse original demonstrations while preserving task semantics and motion quality. Experiments show contact-preserving retargeting across robot configurations, broad tracking with a single generalist policy, executable motions that keep growing over augmentation rounds, and transfer to real robots. InterMimicGen provides a unified path from heterogeneous human demonstrations to a continually expanding motion resource for humanoid robot learning.

Reliable vision-and-language navigation (VLN) requires not only understanding instructions but also determining whether and how a robot can physically execute them. However, existing VLN benchmarks typically assume executable instructions and focus on long-horizon tasks. This leaves body-dependent local execution, including passability and collision-free execution, largely unexamined. Evaluating these factors within long-horizon tasks would entangle local physical execution with task planning and long-term spatial memory, making navigation failures difficult to attribute. We therefore focus on grounding local navigation commands in executable motion under environmental and robot body constraints. We present PASS-VLN, a passability-aware local-command VLN benchmark and model. The benchmark holds the scene, instruction, start pose, and reference route fixed while varying robot body width, requiring target completion when the instructed passage is feasible and stopping before blockage otherwise. Our model encodes body width through obstacle inflation in a depth-derived local bird's-eye view, fuses geometry with visual and linguistic context, and predicts discrete latent action codes for continuous closed-loop execution. Experiments show that PASS-VLN improves collision-free success by approximately 12 percentage points over a strong VLN model fine-tuned on our benchmark, while adapting reach-versus-stop behavior to body constraints and generalizing to unseen body widths. When integrated with a high-level planner, PASS-VLN achieves higher success with fewer local commands, while real-world deployment further demonstrates its effectiveness as a low-level executor. The benchmark and model will be released.

Embodied navigation requires agents to interpret visual observations, accumulate spatial knowledge, and execute actions to follow instructions or locate objects. Training-based methods face generalization challenges, while training-free methods exploit multimodal large language models (MLLMs) but often lack mechanisms to reconcile proposed actions with spatial evidence, task progress, and execution failures. We present HarnessVLN, a zero-shot, training-free framework whose Agent Harness coordinates perception, retrieval, grounding, navigation, recovery, and termination through a unified tool interface. The Harness validates planner proposals against spatial evidence, geometric feasibility, and subgoal consistency, incorporating structured tool feedback into subsequent decisions. Hierarchical event memory tracks task progress and execution history, while a persistent Spatiotemporal Graph maintains reusable spatial evidence and failure annotations for verification and recovery. A replaceable Navigation Executor converts validated targets into executable motions, allowing the same Harness protocol to support instruction-following and object-goal navigation. HarnessVLN achieves success rates of 60.8%, 53.9%, 76.0%, and 59.3% on R2R, RxR, HM3D-v2, and HM3D-OVON, respectively, surpassing prior training-free SOTA results. Humanoid deployment further demonstrates its applicability to both tasks in real-world environments. The project page is: https://harnessvln.netlify.app/.

Safety evaluation for autonomous driving is dominated by rare, safety-critical interactions, motivating simulators that can deliberately synthesize corner cases with photorealistic observations. Corner-case generation is inherently a multi-source problem spanning visual representation, scene reasoning, and vehicle trajectory generation and control. Prior knowledge- and model-based approaches typically focus on scene or trajectory components in isolation, while diffusion-based methods attempt end-to-end generation but still struggle to ensure spatiotemporal consistency and physical realism. To unify these aspects within a single framework, we propose CARLA-GS, a modular corner-case synthesis pipeline that decouples visual representation, semantic reasoning, and physics-based execution while maintaining tight cross-module coupling. Starting from real driving data, we reconstruct an editable gaussian scene with additional geometry-consistent constraints. A multi-agent LLM then performs scene-level reasoning to identify risky interactions and generate intent-level waypoint trajectories, while the low-level motion control is delegated to CARLA, where a PID controller ensures kinematic and dynamic feasibility. The simulated vehicle states are finally re-projected into the gaussian scene for ego-centric rendering. This design enables high-level semantic reasoning, low-level physically executable motion, and photorealistic corner-case generation within a unified pipeline. Experiments on the Waymo Open Dataset show, both quantitatively and qualitatively, that our framework enables controllable corner-case generation and produces photorealistic, spatiotemporally consistent videos aligned with semantic intent and physically feasible motion.

End-to-end autonomous driving has emerged as a compelling paradigm for learning planning directly from sensor observations, while recent world-model-based approaches further enrich this paradigm by enabling explicit reasoning about how the scene may evolve in the future. Yet future prediction alone does not guarantee better planning unless the predicted evolution can be converted into planning-relevant trajectory updates. Many current methods still forecast future scene states without explicitly decoding the motion implications hidden in state transitions. As a result, future reasoning often remains descriptively useful but only weakly coupled to executable motion generation. To address this limitation, we propose IDOL, an inverse-dynamics-guided future prediction framework for world-model-based end-to-end planning in latent BEV space, where inverse dynamics serves as the key bridge between future prediction and trajectory optimization. IDOL first predicts multiple future latent scene states with a BEV world model, then applies an inverse dynamics model to adjacent latent futures to decode transition-aware trajectory features and recover planning-relevant motion deltas that explain how the latent world evolves over time. These inverse-dynamics-derived signals are used to optimize the planned trajectory, turning future forecasting from passive scene anticipation into actionable planning guidance. A lightweight closed-loop refinement module further improves long-horizon consistency by reusing the optimized trajectory for another round of future-aware reasoning. By introducing inverse dynamics into latent future reasoning, IDOL tightens the coupling between world modeling and planning. Extensive experiments on the NAVSIM v1 and NAVSIM v2 benchmarks show that IDOL achieves state-of-the-art performance among comparable methods.

Affordance understanding bridges visual perception and physical action, serving as an explainable interface for robot manipulation in open and unstructured real-world environments. Yet, building an affordance foundation model that not only understands where and how the interaction should happen, but also generalizes across diverse environments, objects, and tasks, remains a long-standing research challenge. Existing methods typically address only part of this challenge, either localizing task-relevant regions without specifying executable motion, or predicting motion but with limited scalability. In this paper, we present ourmodel, a step towards an affordance foundation model for functionality understanding. From a single RGB-D observation and a language task description, ourmodel predicts a task-conditional functional mask (where to interact) and a 3D post-contact motion curve (how to interact). To support open-world generalization, we build a large-scale standardized data pipeline that converts heterogeneous robot, human, simulation, and real-world scan data into a shared affordance schema with language, masks, and object-centric 3D motion labels. We evaluate ourmodel from three aspects: for affordance segmentation, ourmodel outperforms all baselines by a large margin across 8 test sets from 4 benchmarks, improving mean gIoU/cIoU by +23.9/+26.3; for contact-point prediction, it predicts substantially more accurate points, with a 12.7--61.3% hit-rate gain over the best baseline; and for 3D motion, it achieves the best performance on all three test sets. ourmodel can be deployed for real-world robot manipulation without finetuning for robot embodiment or using task-specific heuristics, demonstrating the ability to adapt to open-world affordance tasks. Project page: https://www.zhaoningwang.com/AFUN

This paper presents a novel approach to enhance autonomous robotic manipulation using the Large Language Model (LLM) for logical inference, converting high-level language commands into sequences of executable motion functions. The proposed system combines the advantage of LLM with YOLO-based environmental perception to enable robots to autonomously make reasonable decisions and task planning based on the given commands. Additionally, to address the potential inaccuracies or illogical actions arising from LLM, a combination of teleoperation and Dynamic Movement Primitives (DMP) is employed for action correction. This integration aims to improve the practicality and generalizability of the LLM-based human-robot collaboration system.

Learning from human video demonstrations remains challenging due to noisy hand-object interactions, unseen objects with partial observation, and cross-embodiment discrepancy. To address these challenges, we present HOWTransfer (Hand-Object Open-World Transfer), a hand-centric framework that distills human demonstrations into contact-aware, taxonomy-informed, and diverse robotic trajectories. Instead of relying on object-specific descriptions, vision-language queries, or explicit object-state tracking, HOWTransfer recovers temporally consistent 3D hand motion and localizes temporal contact intervals by reasoning over observed hand-object interaction cues. The localized contact onsets are then used to retarget human grasp intent into multi-modal parallel-jaw grasp hypotheses, which are propagated along the recovered wrist trajectory to generate robot-executable motions. Finally, a trajectory editing stage refines contact alignment and produces diverse executable variants from a single demonstration. Experiments across diverse manipulation tasks show that HOWTransfer enables accurate contact localization and high-quality robot motion retargeting with 86% success, which is preferred over teleoperated trajectories in a blinded preference study.

World models are emerging as a foundational paradigm for scalable, data-efficient embodied AI. In this work, we present GigaWorld-0, a unified world model framework designed explicitly as a data engine for Vision-Language-Action (VLA) learning. GigaWorld-0 integrates two synergistic components: GigaWorld-0-Video, which leverages large-scale video generation to produce diverse, texture-rich, and temporally coherent embodied sequences under fine-grained control of appearance, camera viewpoint, and action semantics; and GigaWorld-0-3D, which combines 3D generative modeling, 3D Gaussian Splatting reconstruction, physically differentiable system identification, and executable motion planning to ensure geometric consistency and physical realism. Their joint optimization enables the scalable synthesis of embodied interaction data that is visually compelling, spatially coherent, physically plausible, and instruction-aligned. Training at scale is made feasible through our efficient GigaTrain framework, which exploits FP8-precision and sparse attention to drastically reduce memory and compute requirements. We conduct comprehensive evaluations showing that GigaWorld-0 generates high-quality, diverse, and controllable data across multiple dimensions. Critically, VLA model (e.g., GigaBrain-0) trained on GigaWorld-0-generated data achieve strong real-world performance, significantly improving generalization and task success on physical robots without any real-world interaction during training.

Scaling humanoid motion foundation models is constrained by the scarcity of diverse, robot-executable data and by the difficulty of jointly learning from heterogeneous multimodal inputs while supporting real-time closed-loop control. We present Movens-5M, constructed from raw Internet videos through clip generation, quality filtering, semantic annotation, motion recovery, and physical refinement with humanoid retargeting and execution verification. It contains 15 million human-motion sequences and 5 million physically executable humanoid-motion sequences spanning over 10,000 hours, aligned with text, RGB video, speech, and music. Building on this data, we introduce Movens-Zero, a scalable understanding-generation-execution architecture that supports joint learning across modalities and real-time closed-loop execution. Task-mixed flow-matching training jointly optimizes a single action expert across seven generation tasks, enabling direct motion generation from text, speech, music, and video. Multimodal Real-Time Chunking connects overlapping chunks under continuously updated instructions and robot states for continuous closed-loop execution. We further introduce Movens-Intent, a four-track benchmark with 8,192 expert-verified condition-motion pairs across text, speech, music, and video. Experiments show consistent gains across all four modalities when scaling execution-verified data from 1% to 100% and action-expert capacity from 64M to 911M parameters, while demonstrating that data quality and cross-modal supervision improve generation and execution.

World Action Models (WAMs) typically adapt video foundation models to robotic control through joint video and action prediction. However, task-level instructions may leave the next physical interaction underspecified, requiring semantic grounding and state-dependent motion selection. To this end, we introduce Atomic-WAM, an understand-then-execute framework that connects task reasoning to action generation through atomic-motion descriptions. Specifically, a vision-language reasoner describes the next local motion from the task instruction and visual context, guiding a WAM to predict future video and an action chunk. Furthermore, an automatic annotation pipeline curates temporally aligned, contact-enriched supervision from multi-view DROID demonstrations. To make atomic-motion predictions executable by the WAM, we post-train the reasoner with Execution-Grounded GRPO (EG-GRPO). With the WAM fixed, EG-GRPO adapts the reasoner through rewards for motion appropriateness and execution success. Finally, Atomic-WAM achieves 39.6% task success under default instructions and 31.6% under vague instructions in a real-to-sim evaluation on RoboLab. Project page: https://ssj9596.github.io/Atomic-WAM-project

Internet videos constitute the largest reservoir of embodied human manipulation knowledge, yet converting arbitrary RGB footage into actionable robot training data remains a major bottleneck. Existing lab- or factory-collected datasets are narrow in scale and diversity, limiting open-world robot learning. Instead of proposing a static dataset, we introduce EgoInfinity, a universal 4D hand-object interaction data engine that enables web-scale data generation for robot retargeting and learning. EgoInfinity is a modular engine integrating perception, segmentation, reconstruction, interaction-aware refinement, and retargeting to automate this traditionally unscalable video-to-action problem without human-in-the-loop annotation. Its modular design lets the engine continuously benefit from advances in any incorporated component. With EgoInfinity, in-the-wild human manipulation videos are lifted into agent-agnostic, metric 4D hand-object representations, including hand trajectories, 6-DoF object poses, and contact-relevant states. Rather than naively connecting standalone components, EgoInfinity combines cross-module metric calibration with interaction-aware refinement to improve physical reliability, reducing drift and contact inconsistencies common in pure visual reconstruction. We further propose a novel motion retargeter that compiles the recovered 3D hand motions into executable joint trajectories for diverse robot morphologies, enabling video-to-action retargeting on any robot from arbitrary viewpoints and shot sizes (e.g., the human body is only partially visible). We validate EgoInfinity across perception fidelity, kinematic feasibility, contact consistency, cross-embodiment generalization, and real-robot skill acquisition (e.g., grasping, cutting, wiping, and pouring), demonstrating a scalable bridge from internet videos to executable robot behavior for open-world robot learning.

Dexterous robot hands can receive useful motion intent from teleoperation or learned policies, but successful execution also depends on contact decisions that these commands rarely specify. We introduce DexFLEX, a contact-aware foundation controller that turns upstream fingertip-motion drafts into contact-consistent joint commands. Instead of treating a draft as a trajectory to copy, DexFLEX treats it as evidence about intent: from the current tactile-proprioceptive state, it proposes feasible short-horizon motion chunks, predicts their contact consequences, and selects the candidate that best follows the command while preserving future contact stability. At inference time, a simple Draft-Dream-Select procedure combines pure-prior proposals for recovery with draft-seeded proposals for responsiveness, then decodes the selected motion into executable joint-space targets. Across degraded-command simulation, real-world shared control, and visuomotor policy learning, the same trained controller improves robustness without retraining, increasing real-world teleoperation success from 29.2% to 78.3% and reaching 46.7% policy-learning success, 3.5 times direct joint-action prediction, and 1.56 times prior-only correction. Videos are available at dex-flex.github.io.

Learning generalizable humanoid loco-manipulation remains bottlenecked by costly real-world demonstrations. Simulation provides a scalable alternative, but requires visually faithful, physics-ready scenes and executable whole-body motions. We present Zero-HLM, a real-to-sim-to-real framework that transforms smartphone captures and simulated source demonstrations into scalable training data for humanoid loco-manipulation. Gaussian-guided agentic real-to-sim reconstruction aligns visual and physical scenes; motion-environment co-adaptation uses rollout feedback to correct whole-body references and interaction geometry. We generate 4,800 physically validated demonstrations for zero-shot transfer across three Unitree G1 tasks. Simulation-trained GR00T N1.7 achieves 66.7% mean full-task success, versus 46.7% with real-data training. On generalized configurations, expanded simulation training raises pooled success from 23% for base-trained real-data policies to 69%, without additional real demonstrations. Project page: https://young-bit.github.io/zero-hlm/

Ensuring the safety of autonomous driving is a critical challenge. Scenario-based testing is a systematic process used to validate Autonomous Driving Systems (ADSs), but it remains a fragmented modular pipeline in which scenario generation, retrieval, modification, ADS execution, and results analysis are performed by separate tools with little interaction. Large Language Model (LLM) agents have shown promise across ADS sub-systems such as perception, planning, and control. However, no prior work covers the whole scenario-based testing pipeline for ADSs with a unified LLM-agent framework. We present PlannerForge, an LLM-agent framework that extends all scenario-based testing stages (from Scenario Generation to ADS Assessment) and adds two further LLM-enhanced stages: ADS Enhancement and ADS Benchmarking. We evaluate PlannerForge with 10 off-the-shelf LLMs across all tasks (Generation, Selection, Modification, Module Routing, Planner Testing, and Enhancement) under 5 prompt conditions. Best-per-task scores range from 0.88 to 1.00, and open-source 20-35B backends match commercial APIs on most tasks. Open-source models such as Qwen3.6:35B match commercial APIs on three of the five tasks. Chaining the modules end-to-end retains 83% / 78% of seed queries (commercial / open). It outperforms Scenario Factory 2.0 (Finkeldei et al., 2025) on natural-language generation (193 vs. 144 executable of 200) and realises 92-96% of requested city, road and vehicle attributes. It outperforms BM25 (Robertson and Zaragoza, 2009) at rank 1 selection (92.0% vs. 67.5%) and From-Words-to-Collisions (Gao et al., 2025) on physically valid edits (>=94% vs. 31%). At N=400, cost-tuning lifts planner success from 50.4% to 70.2% and cuts collisions from 19.0% to 8.4%, without domain-specific fine-tuning.

Recent work in the construction of 3D scene graphs has enabled mobile robots to build large-scale metric-semantic hierarchical representations of the world. These detailed models contain information that is useful for planning, however an open question is how to derive a planning domain from a 3D scene graph that enables efficient computation of executable plans. In this work, we present a novel approach for defining and solving Task and Motion Planning problems in large-scale environments using hierarchical 3D scene graphs. We describe a method for building sparse problem instances which enables scaling planning to large scenes, and we propose a technique for incrementally adding objects to that domain during planning time that minimizes computation on irrelevant elements of the scene graph. We evaluate our approach in two real scene graphs built from perception, including one constructed from the KITTI dataset. Furthermore, we demonstrate our approach in the real world, building our representation, planning in it, and executing those plans on a real robotic mobile manipulator. A video supplement is available at https://youtu.be/v8fkwLjBn58.

World models are becoming central to robotic planning and control as they enable prediction of future state transitions. Existing approaches often emphasize video generation or natural-language prediction, which are difficult to ground in robot actions and suffer from compounding errors over long horizons. Classic task and motion planning models world transitions in logical space, enabling robot-executable and robust long-horizon reasoning. However, they typically operate independently of visual perception, preventing synchronized symbolic and visual state prediction. We propose a Hierarchical World Model (H-WM) that jointly predicts logical and visual state transitions within a unified framework. H-WM combines a high-level logical world model with a low-level visual world model, integrating the long-horizon robustness of symbolic reasoning with visual grounding. The hierarchical outputs provide stable intermediate guidance for long-horizon tasks, mitigating error accumulation and enabling robust execution across extended task sequences. Experiments across multiple vision-language-action (VLA) control policies demonstrate the effectiveness and generality of H-WM's guidance.

Motion instruction generation in cross-video comparison aims to produce corrective feedback that describes the differences between a query and a reference motion. However, existing models often generate instructions that exhibit motion hallucinations, failing to reflect actual kinematic differences between paired videos. To systematically investigate these hallucinations, we introduce MotionHalluc, a dedicated benchmark for evaluating motion hallucinations in paired-video comparison. MotionHalluc comprises 1540 fine-grained questions over 553 video pairs, evaluating hallucinations along three core dimensions: (1)directional hallucination, (2)attributional hallucination, and (3)temporal hallucination. Extensive evaluations of state-of-the-art large multimodal models demonstrate high susceptibility to these hallucinations. Furthermore, we provide Perceive-Parse-Verify (PPV) as a training-free measurements extraction and verification baseline that converts candidate instructions into executable measurement queries and supplies kinematic measurements at inference time. Our results show that this simple measurements injection yields an average 10.6% performance gain across models, suggesting that motion reasoning with explicit quantitative measurements is a key factor in reducing hallucinations in cross-video comparison. Our code and dataset will be made publicly available upon acceptance.

Object-Centric Motion Generation (OCMG) plays a key role in a variety of industrial applicationsx2014such as robotic spray painting and weldingx2014requiring efficient, scalable, and generalizable algorithms to plan multiple long-horizon trajectories over free-form 3D objects. However, existing solutions rely on specialized heuristics, expensive optimization routines, or restrictive geometry assumptions that limit their adaptability to real-world scenarios. In this work, we introduce a novel, fully data-driven framework that tackles OCMG directly from 3D point clouds, learning to generalize expert path patterns across free-form surfaces. We propose MaskPlanner, a deep learning method that predicts local path segments for a given object while simultaneously inferring "path masks" to group these segments into distinct paths. This design induces the network to capture both local geometric patterns and global task requirements in a single forward pass. Extensive experimentation on a realistic robotic spray painting scenario shows that our approach attains near-complete coverage (above 99%) for unseen objects, while it remains task-agnostic and does not explicitly optimize for paint deposition. Moreover, our real-world validation on a 6-DoF specialized painting robot demonstrates that the generated trajectories are directly executable and yield expert-level painting quality. Our findings crucially highlight the potential of the proposed learning method for OCMG to reduce engineering overhead and seamlessly adapt to several industrial use cases.

Multi-Modal Motion Planning (M^3P) requires joint reasoning over continuous motions and discrete mode transitions, making it difficult to solve efficiently. For instance, a bipedal robot may walk to a target location and then use its arms to grasp an object. This scenario captures both mode transitions and continuous dynamics, yielding feasible paths that neither purely discrete nor continuous planners can handle. While Mixed-Integer Programming (MIP) offers a principled framework, constructing tractable formulations for non-convex problems is typically manual and domain-specific, especially in the approximate, discretization-based MIP regime needed for non-convex robotic tasks. We propose M^3P-R1, a reinforcement learning method that fine-tunes large language models (LLMs) to decompose M^3P tasks into MIP variables, constraints, and objectives. Instead of directly outputting answers, which are often prone to hallucination, the model generates executable Python code using MIP optimization libraries and constraint interfaces. This enables solver-backed execution for robust and verifiable solutions. Trained with an outcome-driven reward against the solver, M^3P-R1 learns to compose modality-level discretization primitives and synthesize cross-modal coupling constraints, producing executable MIP programs for complex M^3P tasks.

A fundamental challenge in embodied intelligence is developing expressive and compact state representations for efficient world modeling and decision making. However, existing methods often fail to achieve this balance, yielding representations that are either overly redundant or lacking in task-critical information. We propose an unsupervised approach that learns a highly compressed two-token state representation using a lightweight encoder and a pre-trained Diffusion Transformer (DiT) decoder, capitalizing on its strong generative prior. Our representation is efficient, interpretable, and integrates seamlessly into existing VLA-based models, improving performance by 14.3% on LIBERO and 30% in real-world task success with minimal inference overhead. More importantly, we find that the difference between these tokens, obtained via latent interpolation, naturally serves as a highly effective latent action, which can be further decoded into executable robot actions. This emergent capability reveals that our representation captures structured dynamics without explicit supervision. We name our method StaMo for its ability to learn generalizable robotic Motion from compact State representation, which is encoded from static images, challenging the prevalent dependence to learning latent action on complex architectures and video data. The resulting latent actions also enhance policy co-training, outperforming prior methods by 10.4% with improved interpretability. Moreover, our approach scales effectively across diverse data sources, including real-world robot data, simulation, and human egocentric video.

Video generative models are increasingly used as world models for robotics, where a model generates a future visual rollout conditioned on the current observation and task instruction, and an inverse dynamics model (IDM) converts the generated frames into executable robot actions. However, current video world models lack explicit executability constraints. As a result, visually coherent rollouts may still violate rigid-body and kinematic consistency, producing unstable or infeasible control commands when decoded by an IDM. We refer to this mismatch between visual generation and physically executable control as the executability gap. While this gap can be mitigated at inference time using techniques such as rejection sampling, such approaches are inefficient due to the high cost of video generation. In this paper, we leverage the executability gap as a training signal and introduce Executable Video Alignment (EVA), a reinforcement-learning post-training framework for aligning video world models. EVA trains an inverse dynamics model on real robot trajectories and repurposes it as a reward model that evaluates generated videos through the action sequences they induce, encouraging smooth motions measured by velocity, acceleration, and jerk while penalizing actions that violate embodiment constraints. Importantly, the reward remains informative even when generated videos contain severe visual artifacts, since such artifacts typically translate into unstable or out-of-bound actions. Experiments on the RoboTwin benchmark and a real bimanual robot show that EVA reduces embodiment-specific artifacts in generated rollouts and improves downstream task execution success.

Recent advances in large-scale pretrained vision-language-action models have improved robot policy learning, but directly deploying such policies in user-specific environments remains challenging due to limited generalization, which inevitably requires collecting a dataset tailored to the target environment. Teleoperation yields well-aligned data but is costly and difficult to scale, whereas simulation scales easily but struggles to resemble the target environment and generate task-specific trajectories. To meet both simultaneously, we propose PRISM, an end-to-end pipeline that generates personalized robotic datasets from a single image and a natural-language instruction. PRISM constructs digital cousin scenes that are semantically and geometrically aligned with the user environment yet diverse at the instance level, and synthesizes executable demonstrations without human teleoperation. Extensive experiments show that policies trained on PRISM-generated datasets outperform those trained on baseline-generated datasets on LIBERO and LIBERO-Plus, achieve up to 100\% success rate on three real-world manipulation tasks, and maintain stronger performance when evaluated in environments that differ from those seen during training.

Optimisation-based parking planners usually impose collision constraints only at the time samples, so a vehicle corner can cut an obstacle between samples, and no executable trajectory exists until the solver converges. We present a planner for car-like vehicles with reverse gear in which every iterate of the optimisation phase satisfies the discretised dynamics exactly and keeps the whole vehicle rectangle clear of obstacles between the samples. Each time interval receives one convex corridor that holds all vehicle corners at both ends and is shrunk by a sweep margin bounding how far the corner paths leave their chords. Separating half-planes give the corridors a direction out of obstacles when the initial guess is in collision; later, heading-aligned boxes are grown from the speed, curvature and step of the current iterate and rebuilt after accepted steps. A feasibility-perturbed trust-region sequential quadratic programming method projects each step onto the dynamics by feedback and verifies it exactly; the cost decreases monotonically, and once the corridors stop changing, limit points are Karush-Kuhn-Tucker points of the corridor-constrained problem or violate a constraint qualification. On 820 benchmark cases the planner succeeds in 818 without penetration (797 from the first initial guess), none of the 7103 evaluated optimisation-phase iterates is unusable, and it succeeds in 96.5% of the cases when 99% of the initial guesses intersect an obstacle. Its maneuvers take 0.7% longer in the median than those of a similarly certified exact-collision baseline. The guarantees hold for the planning model, not for a physical vehicle.

Scaling generalist vision-language-action (VLA) policies is severely bottlenecked by the inherent heterogeneity of embodied data, which spans diverse robot morphologies, camera configurations, and low-level action spaces. Existing paradigms typically address this mismatch through explicit action retargeting, human-to-robot video synthesis, or dataset-specific adaptation branches, fundamentally hindering the joint learning of a unified policy. We introduce UCAG-P, a camera-centric unified action formulation that structurally aligns heterogeneous embodied datasets into a shared geometric action space. Rather than treating robot-specific commands as the shared policy target, UCAG-P represents manipulation through camera-observable anchor motion in image and camera-frame coordinates, treating robot arms, humanoids, and human hands as different embodiments of a common action schema. A geometry-conditioned action translator combines predicted motion with target-embodiment kinematics to produce executable controls. The resulting decoupled architecture allows a shared VLA policy to learn transferable manipulation geometry while retaining embodiment-specific controllability. UCAG-P is trained on 4.03K hours of robot and simulation data and 2.34K hours of human demonstrations. A single checkpoint reaches 98.3% on LIBERO, 88.7% and 89.2% on RoboTwin Easy and Hard, 82.0% zero-shot on LIBERO-Plus, and 62.0% on RoboCasa GR-1, without benchmark-specific fine-tuning.

Complex camera motion is central to visual storytelling, yet translating cinematographic intent into controllable, executable camera trajectories remains challenging. We introduce FilmFlow, an agentic framework that converts natural-language instructions or reference videos into explicit camera trajectories for dynamic 3D environments. To generate these trajectories, a Director agent constructs executable camera plans by composing high-level motions from concurrent atomic operations that jointly control translation, rotation, and framing. The Director is supported by three specialized agents: an Interpreter that extracts scene-grounded cinematographic intent, a Scout that selects initial viewpoints, and a Critic that evaluates rendered results and provides visual feedback for iterative plan refinement. We also introduce CinemaBench, comprising 150 Blender scenes from self-created and licensed sources, with five camera instructions per scene for 750 text-directed tasks and 60 reference videos associated with a subset of scenes. CinemaBench supports evaluation of both text-directed camera generation and video reference-directed camera generation. Across a diverse set of evaluated baselines, FilmFlow achieves the strongest benchmark performance and the highest user preference, demonstrating effective spatial reasoning, temporal coordination, and visual composition for executable 3D cinematography.

Humanoid control systems have made significant progress in recent years, yet modeling fluent interaction-rich behavior between a robot, its surrounding environment, and task-relevant objects remains a fundamental challenge. This difficulty arises from the need to jointly capture spatial context, temporal dynamics, robot actions, and task intent at scale, which is a poor match to conventional supervision. We propose ExoActor, a novel framework that leverages the generalization capabilities of large-scale video generation models to address this problem. The key insight in ExoActor is to use third-person video generation as a unified interface for modeling interaction dynamics. Given a task instruction and scene context, ExoActor synthesizes plausible execution processes that implicitly encode coordinated interactions between robot, environment, and objects. Such video output is then transformed into executable humanoid behaviors through a pipeline that estimates human motion and executes it via a general motion controller, yielding a task-conditioned behavior sequence. To validate the proposed framework, we implement it as an end-to-end system and demonstrate its generalization to new scenarios without additional real-world data collection. Furthermore, we conclude by discussing limitations of the current implementation and outlining promising directions for future research, illustrating how ExoActor provides a scalable approach to modeling interaction-rich humanoid behaviors, potentially opening a new avenue for generative models to advance general-purpose humanoid intelligence.

Learning humanoid-object interaction requires coordinating whole-body balance, locomotion, and dexterous hand contact to control both robot and object motion. Human demonstrations provide examples of coordinated interaction, but transferring these behaviors to humanoid robots requires learning how to establish and maintain effective contacts under different embodiments and dynamics. We present Weave, a unified framework for learning whole-body dexterous humanoid-object interaction from captured human demonstrations. Weave first converts captured human-object interactions into executable robot-object references through contact-aware retargeting and approach-motion completion. At its core is a contact- and geometry-aware policy that jointly commands 29 body joints and 12 actuated finger joints across multiple objects and interaction sequences. Evaluation across nine objects yields a 92.5% success rate on trained interactions and, without any additional training, 65.0% on sequences never seen during training. We additionally release ~9,000 physically executed rollouts spanning ~23 hours, providing robot-object trajectories with contact annotations for downstream interaction-policy learning and physically consistent HOI motion generation. Project website: https://xiaohu-art.github.io/Weave/

Real-world videos provide rich demonstrations of manipulation, but turning them into reusable robot skills requires visually aligned environments, executable physical interactions, and mechanisms for learning from experience. We introduce Real2Gym, an agentic Real2Sim2Real framework that turns human and robot demonstrations into interactive simulation gyms and brings skills acquired in simulation to physical robots. The Real2Sim module reconstructs editable scenes, aligns objects and cameras with the input, validates demonstrated or retargeted actions through native physics execution, and generates task-conditioned variations with action-feasibility checks. Within these environments, the agent generates executable code for manipulation stages, observes their outcomes, and distills successful attempts and failures into reusable task procedures, object-relative motions, and recovery strategies. Through a shared perception-and-control interface, these skills guide subsequent execution in simulation and on real robots, with motions adapted to current observations and no updates to the underlying model weights. Extensive evaluations demonstrate that Real2Gym enables high-fidelity simulation environment reconstruction, outperforming GPT-6 Astra Direct Mode by 16.7% in success rate with approximately 74.9% fewer policy-execution tokens across these environments, while exceeding it by 33.3% in physical robot execution success rate across four tasks on a real Franka robot.

Frontier models can control robots, but reasoning through every reach, grasp, and retreat makes manipulation slow and token-intensive. We revisit code as policy with a different division of labor: models build executable tools, code handles multi-phase motions, and models decide what to do next. We introduce URAI (Universal Robot-Agent Interface), which couples a programming agent that constructs robot tools with an execution agent that uses them in a feedback loop. The programming agent writes reusable and task-specific tools from task intent and refines them through execution feedback and human guidance. The execution agent selects and parameterizes these tools from current observations; each call runs a complete motion locally before returning control to the agent. Unlike delegating subsequent decisions to a generated program, this design retains model-level decision-making between tool executions. Validated tool revisions persist across episodes without updating foundation-model weights, and a shared GUI and API make the same tools available to humans and agents. Across five RoboDojo tasks and four frozen execution agents, URAI raises aggregate success from 18.0% to 53.0% relative to direct fingertip control, with the largest gain on Swap Blocks; with the same tools, a program written in advance reaches only 24% against 56% for two agents deciding after each call. Three of the four agents also finish episodes 1.3-1.5 times faster with 1.5-1.7 times fewer execution-agent output tokens; DeepSeek-V4-Flash's cost barely changes. We further evaluate URAI on seven real-world AgileX dual-arm tasks, spanning object manipulation, cloth folding, and human-interactive tic-tac-toe. URAI connects the coding and decision-making capabilities of frontier agents, organizing robot control around reusable tools that agents can both invoke and revise.

As embodied AI and world models increasingly operate in dynamic 3D environments, visual perception must move beyond passively interpreting given observations toward actively deciding what to observe. We study this problem through camera planning in dynamic 3D story worlds, where the camera must not only generate smooth motion, but also decide what visual evidence should be acquired before it moves. We formulate this capability as Narrative-Grounded World Visual Attention, where the camera acts as an embodied observer that determines what to observe, how to compose the observation, and how to shift attention over time under narrative intent and physical 3D constraints. To realize this capability, we propose Look-Before-Move, a camera planning framework that separates observation specification from motion execution. It first builds a Semantic Observation Contract to convert directorial intent into executable visual constraints, then performs Monte Carlo Viewpoint Search to find narrative-compliant and geometrically feasible viewpoints, and finally applies Semantic Trajectory Grounding to connect selected viewpoints into continuous, collision-aware, and temporally coherent camera motion. We further construct a dynamic 3D Story World Benchmark based on StoryBlender, covering 50 stories, 457 scenes, and 1585 shots with animated characters, semantic scene configurations, and executable 3D environments. Experiments show that our framework improves subject perception, intent consistency, and trajectory quality over representative baselines, demonstrating the importance of organizing visual attention before generating camera motion.

Humanoid robots promise whole-body interaction in human-centered environments, but scalable policy learning remains difficult because task-level decision-making and whole-body dynamic execution are tightly coupled. A practical solution is hierarchical control, where a high-level policy predicts intermediate whole-body actions and low-level general motion trackers (GMTs) execute them as stable humanoid motion. However, existing benchmarks rarely evaluate the policy-tracker interface itself, leaving open whether intermediate whole-body actions are executable, robust under task distribution shifts, and transferable across different GMT backends. We introduce HumanoidArena, a simulation-first benchmark for egocentric hierarchical whole-body learning. The benchmark formulates policy learning as a hierarchical decision making problem: a high-level policy converts egocentric vision, proprioception, and instructions into a compact whole-body action, which is subsequently executed by a low-level GMT. Instead of treating the legs as planar transport tools, HumanoidArena emphasizes interactions where lower-body coordination is structurally necessary in task completion. We therefore design 7 leg-critical HOI/HSI tasks in which success requires foot placement, balance maintenance, posture adjustment, and whole-body reorientation. To further diagnose the hierarchical system, we evaluate policies from two complementary perspectives: perturbation-conditioned generalization and GMT-conditioned transfer. Experiments show that hierarchical control enables learned policies to solve diverse leg-critical interactions, but performance is strongly tracker-conditioned and cross-GMT transfer remains fragile. These results position HumanoidArena as a benchmark for studying transferable intermediate action representations and scalable egocentric whole-body policy learning.

Video-based manipulation provides object-centric motion priors from human demonstrations, generated videos, or RGB-D observations, but such priors are typically embodiment-agnostic and cannot be directly executed by a specific robot. This paper presents PhysV2A, a reachability-gated and semantic-mask-constrained feasibility-completion framework for converting video-derived 6D object motion into robot-executable manipulation trajectories. The key idea is to treat grasp feasibility as trajectory-conditioned rather than local: each RGB-D-generated 6-DoF grasp candidate is rigidly coupled with the recovered object motion to form a grasp-conditioned TCP trajectory hypothesis. PhysV2A then performs hierarchical reachability-gated selection, where infeasible grasp--trajectory pairs are rejected by robot-centric kinematic checks and surviving candidates are ranked by downstream execution suitability. For the selected reachable trajectory, a VLM-assisted and rule-validated S-Mask identifies task-critical and relaxable Cartesian components, enabling semantic-mask-constrained manipulability refinement through redundancy-first optimization and bounded Cartesian relaxation. Real-robot experiments on four tabletop manipulation tasks show that PhysV2A improves task success over representative video-prior and IK-only baselines, reduces kinematic-feasibility failures, and produces better-conditioned trajectories with bounded semantic deviations.

Language-conditioned quadrotor flight requires a policy to ground semantic goals, anticipate the visual consequences of ego-motion, and output control references that remain smooth and dynamically executable under rapidly changing first-person views. Existing aerial vision-language navigation and vision-language-action methods commonly use discrete actions, high-level waypoints, or instantaneous velocity commands, which provide limited supervision about how flight actions change future observations. We present AeroAct, an action-centered world-action model (WAM) for quadrotor navigation. To the best of our knowledge, AeroAct is the first WAM instantiated and demonstrated for real-world aerial flight. The model adapts a pretrained video diffusion Transformer to predict local trajectory-action chunks from egocentric visual history, proprioception, and language. Future first-person frames are used during training as dense consequence supervision, while deployment directly decodes actions without generating future video. To obtain aligned visual, state, language, and dynamically feasible action data, we build a DiffAero-based pipeline with complementary Isaac Lab and 3D Gaussian splatting renderers. We further introduce a low-cost handheld collection device that couples camera observations with motion estimates to recreate flight-like egocentric trajectories, and a self-guidance procedure that improves temporal consistency across overlapping trajectory chunks. Closed-loop simulation and real-world experiments show that temporal visual context improves target tracking and object-search performance, and that WAM-based policies can be executed on a physical quadrotor.

Dexterous manipulation is limited by the cost of collecting large-scale robot demonstrations. Egocentric human videos offer a scalable source of diverse manipulation behaviors, but directly using them for robot learning requires bridging two gaps: the visual gap between human and robot observations, and the action gap between human motion and robot-executable action. We propose EgoEngine, a scalable framework for transforming egocentric human manipulation videos into high-fidelity robot data. Given an egocentric RGB video, EgoEngine produces: (i) a high-fidelity robot observation video replacing human with robot while preserving scene context and temporal alignment, and (ii) a task-aligned, executable robot action trajectory under feasibility constraints. Experiments in simulation and on real robots show that EgoEngine enables scalable conversion of human videos into robot data and, to our knowledge, demonstrates the first zero-shot visuomotor dexterous policy learning from egocentric human videos without real-robot demonstrations. Project website: https://egoengine.github.io.

Humanoid household tasks often require concurrent loco-manipulation, where the robot must move, adjust posture, maintain balance, and manipulate objects as a single coordinated behavior. Yet existing humanoid policies typically decompose locomotion and manipulation, while recent world-action models remain either arm-centric or video-centered. We present ω-0, a latent predictive whole-body world-action model for real-world humanoid concurrent loco-manipulation. Given a language instruction, current visual observation, and robot proprioceptive state, ω-0 directly predicts controller-compatible whole-body action latents for real-robot execution. Rather than reconstructing future videos, ω-0 learns compact future observation embeddings as a lightweight predictive objective, coupling latent visual foresight with diffusion-based whole-body action generation. The model supports egocentric RGB, exocentric RGB, and exocentric depth inputs, and leverages controller-based simulation replay to ground human/public visual-motion priors into robot-executable action latents. We further collect ω-HOME, a 40+ hour real-world household humanoid dataset with synchronized multi-view observations, whole-body SMPL motions, robot states, and action latents. Real-world experiments on 11 household tasks demonstrate that a single ω-0 model can produce smooth manipulate-while-moving behaviors and consistently outperform representative imitation learning, VLA, humanoid, and WAM baselines.

We demonstrate that a general-purpose agent can directly drive a physical robot throughout task execution without any task-specific or environment-specific training. We introduce Agent as Policy (AGP), which places task planning and execution under the agent's control. Given a task and a robot interface, the agent interprets visual evidence, writes executable programs, issues motion commands, and revises its actions in response to physical outcomes. This brings the agent's reasoning and programming capabilities into continuous interaction with the physical world. We study AGP across multiple real-world manipulation tasks spanning precision manipulation, dynamic motions, and deformable objects. These include assembly from human videos, block construction from goal images, die reorientation, targeted throwing, and bimanual towel folding. AGP achieves success rates of 100%, 100%, and 80% on three block construction configurations. These findings establish a path for general-purpose agents to act as robotic policies, extending their autonomy to physical manipulation through runtime reasoning, programming, and interaction.

Embodied agents benefit from 3D environments that combine visual fidelity to real-world observations with physical interactivity. Existing single-image tabletop reconstruction methods recover plausible scene geometry but typically represent objects as monolithic rigid bodies, limiting interaction to whole-object rigid motion and precluding executable part-level articulation. Meanwhile, recovering a scene layout consistent with the input view remains challenging because a single observation may admit multiple plausible pose-scale configurations. We present ArticuTable, a single-image 3D tabletop reconstruction framework that recovers both executable part-level articulation and an input-view-consistent scene layout. For object modeling, we introduce generation-robust articulation modeling (GRAM), which combines joint fitting guided by a multimodal large language model with semantic state reasoning to recover reliable joint parameters and valid motion ranges from imperfect monolithic proxy meshes, thereby converting them into executable articulated assets. For scene layout, we introduce progressive semantic-geometric scene registration (PSGSR), which progressively narrows the pose-scale search space under complementary metric, planar, and input-view constraints and resolves orientation ambiguity through structure-aware semantic correspondences, yielding a scene layout consistent with the input view. We further contribute ArticuTable-100, a curated collection of 100 simulation-ready tabletop scenes. Extensive evaluation, including a user study, demonstrates strong performance across visual fidelity, input-view consistency, articulation quality, physical plausibility, and simulation readiness.

We present MOTIO, an agentic skill-engineering system that turns ordinary human-action videos, reality-grounded 3D assets, motion references, and reusable robot skills into executable humanoid loco-manipulation programs. Through in-context task and contact reasoning, an agent constructs staged robot-native interactions and improves them using physics execution, multi-frame feedback, and human validation---without task-specific teleoperation or robot demonstration collection. Agentic 3D supplies metric product and environment assets, while existing whole-body, inverse-kinematics, and dexterous-hand interfaces realize the programs. Across 33 timestamped first approvals, the median recorded agent-turn time is 97.0 minutes and request-to-approval duration is 2.80 hours. Simulation-side layout and object variation prepare a long-horizon bottle-disposal skill for a continuous 101.75-second physical G1 execution in a scanned office; physical refinement reduces screw-tightening thread residual by 76.0%. Agent-generated skills additionally supervise BC/DAgger distillation into one shared reference policy, completing 18 simulated tasks under the same checkpoint without inference-time expert intervention. Project page: https://iiiiqiiii.github.io/motio/

Large language model agents increasingly act through terminals, yet existing surveys disperse terminal-mediated behavior across software engineering, tool use, and computer-use research. We regard terminal agents as systems whose dominant progress-bearing action--observation loop is mediated by terminal command execution, textual feedback, and stateful environment interaction. Using terminal-mediated execution as an organizing lens, this survey establishes workload-level boundaries and connects system architecture, competence acquisition, and evaluation through a seven-dimensional terminal competence profile. Our synthesis shows that realized behavior is jointly shaped by the model, interface, harness, runtime, and environment. Executable trajectories ground learning in action consequences, verification, and recovery, whereas prevailing evaluations emphasize final outcomes and expose process quality, recovery, and governance unevenly. Bounded fixed-condition diagnostics illustrate two implications: benchmark families expose different process signals, and matched system comparisons reveal benchmark-dependent performance and limits of component attribution. These findings motivate explicit reporting of system and runtime conditions, supported by replayable traces and process-level evidence. The framework provides a unified basis for studying terminal-mediated agency across software engineering and emerging application domains.

Text-to-video models have achieved remarkable visual quality, yet they still struggle to generate physically consistent dynamics because the temporal evolution of a scene must be inferred implicitly from a highly compressed text prompt. Existing chain-of-thought approaches introduce intermediate plans or visual states, but these representations are typically non-executable or temporally sparse, limiting their ability to instantiate and control the complete spatiotemporal process. To address this limitation, we introduce VideoCoCo, an agentic dual-engine framework in which executable Blender code serves as a process-level chain of thought. Given a text prompt, a coding agent synthesizes a Blender program that explicitly specifies the scene and its temporal evolution. The executable simulation engine runs the program to produce a deterministic spatiotemporal draft, which is subsequently transformed into a photorealistic video by a generative video engine through draft-conditioned editing. This decomposition separates process-level reasoning from high-fidelity visual realization. To adapt the video editor to simulated drafts, we construct VideoCoCo-3K, a curated dataset of draft-instruction-target triplets. VideoCoCo improves the OmniWeaving baseline from 0.475 to 0.558 on PhyGenBench and from 52.18 to 77.88 on VBench-2.0, achieving the best average score on both benchmarks. These results demonstrate that executable code provides an effective, controllable, and inspectable intermediate representation for physically consistent video generation.

Recent motion generative models have demonstrated strong capabilities in synthesizing physically plausible character motion, but often overlook established animation principles used by professional animators to ground and design their animation work. Understanding and incorporating these principles into motion generative pipelines is essential for producing motions that serve not only physically grounded applications but also the needs of the character animation community. This enables the creation of characters that not only move in physically plausible ways but also feel alive, expressive, and engaging. To close this gap, we focus on the Exaggeration principle of animation and investigate how it can be incorporated into modern motion generative pipelines to produce more expressive character motions. To this end, we introduce a framework that operates at two stages of existing motion generative pipelines. The first stage introduces exaggeration during training, where we perform supervised fine-tuning of pre-trained text-to-motion models on our curated exaggeration dataset. The second stage operates at inference time, where we: (i) introduce a mathematical formulation of exaggeration based on dynamic movement primitives (DMPs); and (ii) leverage this formulation as an exaggeration guidance signal to guide existing diffusion and flow-matching text-to-motion generation models toward exaggerated motion without additional training. Through qualitative and quantitative evaluations against three strong motion generation models, we show that our methods generate more exaggerated and expressive motions while preserving neutral reference motion intent and physical plausibility.

Computer-using agents (CUAs) are becoming increasingly capable; however, it remains difficult to scale evaluation of whether a trajectory truly fulfills a user instruction. In this work, we study reward modeling from execution video: a sequence of keyframes from an agent trajectory that is independent of the agent's internal reasoning or actions. Although video-execution modeling is method-agnostic, it presents key challenges, including highly redundant layouts and subtle, localized cues that determine success. We introduce Execution Video Reward 53k (ExeVR-53k), a dataset of 53k high-quality video--task--reward triplets. We further propose adversarial instruction translation to synthesize negative samples with step-level annotations. To enable learning from long, high-resolution execution videos, we design spatiotemporal token pruning, which removes homogeneous regions and persistent tokens while preserving decisive UI changes. Building on these components, we fine-tune an Execution Video Reward Model (ExeVRM) that takes only a user instruction and a video-execution sequence to predict task success. Our ExeVRM 8B achieves 84.7% accuracy and 87.7% recall on video-execution assessment, outperforming strong proprietary models such as GPT-5.2 and Gemini-3 Pro across Ubuntu, macOS, Windows, and Android, while providing more precise temporal attribution. These results show that video-execution reward modeling can serve as a scalable, model-agnostic evaluator for CUAs.

Vision-language-action (VLA) and world-action (WAM) models map observations and instructions directly to robot actions. This directness ties a policy to training: minor layout or viewpoint changes cause failure, and instructions generalize poorly. The root cause lies in representation: task requirements, conditions, progress, and failure recovery are implicitly encoded in action sequences, making them difficult to inspect or revise. Digital coding agents offer a precedent: LLMs call tools, verify results, and revise from feedback as executable code. The same working pattern of explicit state, manageable execution, and revisable procedures underlies generalization and long-horizon execution in the physical world, letting physical experience return as reusable programs, memory, or evidence. We propose Physical Coding, representing task state and execution as code. Code as World records objects, relations, constraints, and progress; Code as Policy organizes planning, verification, recovery, and execution. We build HexaAnything, which calls perception, planning, and control tools, including VLA/WAM policies, and makes in-the-loop decisions from external feedback. Verified traces become data and memory, enabling evolution from tools and Harness to model weights, architectures, and ultimately hardware and task design. On RoboCasa365, HexaAnything improves Composite-Unseen and overall success over XR-1 VLA, and its Harness-trained HexaModel beats the base on every split, indicating code traces internalize physical execution. On PhyBench and a dual-arm AgileX robot, the agent autonomously completes physics experiments and most tabletop tasks, often faster than published results. We observe data, model, and tool self-evolution; future work targets weight internalization, autonomous redesign of architectures, languages, representations, and tasks, and deployment in manufacturing and science.

Coding agents are increasingly evolving beyond reproducing what a world looks like toward constructing executable worlds that capture how a world works. This shift calls for executable world modeling, which integrates two core capabilities: world understanding, reasoning about the underlying structural, mechanical, and causal principles of a world, and executable realization, translating that understanding into a code-based system whose behavior emerges from physical interactions. However, existing benchmarks provide only fragmented evaluations centered on physical reasoning, visual fidelity, or behavioral correctness, leaving the integration of these capabilities insufficiently assessed. To bridge this gap, we introduce ExeWorldBench, to our knowledge the first benchmark to comprehensively evaluate world understanding and executable realization through code-based 3D world construction. ExeWorldBench comprises three progressively challenging tasks: Mechanism Executability, which evaluates the realization of individual mechanisms from visual observations; Compositional Executability, which extends to multi-stage systems with spatial, mechanical, and causal dependencies; and Intent-Driven Executable World Synthesis, which requires constructing executable worlds from high-level goals and physical requirements. Extensive experiments on frontier models reveal substantial limitations in executable world modeling, offering insights into the development of more physically grounded and causally coherent world construction systems.

Human videos provide rich motion targets for humanoid learning, yet visually plausible references can still produce persistent failures under physics-based execution. These failures reveal where training supervision should change. We present MimicX, a policy-in-the-loop framework that uses execution feedback to refine video-driven humanoid motion tracking. Starting from reconstructed and retargeted motion, MimicX localizes difficult transitions and affected body regions, then jointly adapts tracking objectives and the reset curriculum for policy continuation. Repeated rollout verification selects execution-priority improvements subject to tracking guards. Across four core video tasks, MimicX consistently improves tracking accuracy and Robust Execution Horizon relative to the Fixed Reference baseline. Task-averaged results show a 25.7% reduction in body-tracking error and a 255.6% increase in execution horizon. Additional video, motion-reference, and collision-scene studies evaluate the method beyond the core tasks, while MimicX-HLoop accelerates feedback through heterogeneous execution. Overall, MimicX turns policy failure into actionable supervision for deciding what to refine and which refinement to retain.

Despite recent advances in image-to-video generation, better controllability and local animation are less explored. Most existing image-to-video methods are not locally aware and tend to move the entire scene. However, human artists may need to control the movement of different objects or regions. Additionally, current I2V methods require users not only to describe the target motion but also to provide redundant detailed descriptions of frame contents. These two issues hinder the practical utilization of current I2V tools. In this paper, we propose a practical framework, named Follow-Your-Click, to achieve image animation with a simple user click (for specifying what to move) and a short motion prompt (for specifying how to move). Technically, we propose the first-frame masking strategy, which significantly improves the video generation quality, and a motion-augmented module equipped with a short motion prompt dataset to improve the short prompt following abilities of our model. To further control the motion speed, we propose flow-based motion magnitude control to control the speed of target movement more precisely. Our framework has simpler yet precise user control and better generation performance than previous methods. Extensive experiments compared with 7 baselines, including both commercial tools and research methods on 8 metrics, suggest the superiority of our approach. Project Page: https://follow-your-click.github.io/

Generating animation of physics-based characters with intuitive control has long been a desirable task with numerous applications. However, generating physically simulated animations that reflect high-level human instructions remains a difficult problem due to the complexity of physical environments and the richness of human language. In this paper, we present InsActor, a principled generative framework that leverages recent advancements in diffusion-based human motion models to produce instruction-driven animations of physics-based characters. Our framework empowers InsActor to capture complex relationships between high-level human instructions and character motions by employing diffusion policies for flexibly conditioned motion planning. To overcome invalid states and infeasible state transitions in planned motions, InsActor discovers low-level skills and maps plans to latent skill sequences in a compact latent space. Extensive experiments demonstrate that InsActor achieves state-of-the-art results on various tasks, including instruction-driven motion generation and instruction-driven waypoint heading. Notably, the ability of InsActor to generate physically simulated animations using high-level human instructions makes it a valuable tool, particularly in executing long-horizon tasks with a rich set of instructions.

We propose MotionAgent, enabling fine-grained motion control for text-guided image-to-video generation. The key technique is the motion field agent that converts motion information in text prompts into explicit motion fields, providing flexible and precise motion guidance. Specifically, the agent extracts the object movement and camera motion described in the text and converts them into object trajectories and camera extrinsics, respectively. An analytical optical flow composition module integrates these motion representations in 3D space and projects them into a unified optical flow. An optical flow adapter takes the flow to control the base image-to-video diffusion model for generating fine-grained controlled videos. The significant improvement in the Video-Text Camera Motion metrics on VBench indicates that our method achieves precise control over camera motion. We construct a subset of VBench to evaluate the alignment of motion information in the text and the generated video, outperforming other advanced models on motion generation accuracy.

Recent agent benchmarks increasingly ground evaluation in executable environments, from code repair to web navigation, app APIs, and function calling. Yet completing consequential work beyond code requires more than producing a plausible response or valid tool call: agents must gather missing information over multiple turns, follow domain policies, coordinate dependent tools, and realize the correct persistent state transition without collateral effects. In this paper, we introduce Thinkingbox, a sandbox for tool-agent-user interaction that provides isolated MCP-compatible tool sessions, complete execution traces, and outcome evaluation over terminal backend state. Built on this sandbox, Thinkingbox-bench contains 507 policy-conditioned workflows across numerous scenarios, including retail, hospitality, auto insurance, neobank internal IT, and consulting IT/HR support. Each attempt is evaluated by task-specific executable checks that accept valid trajectories while rejecting wrong, missing, or extra effects; designated tasks additionally check required properties of the final response. Across proprietary and open-weight models, the strongest achieves 65.36% pass@1, but only 25.25% pass^20. Moreover, many failed trials show clean termination and valid state-changing actions, showing that response or tool-call-level signals are not clear proxies for end-to-end task completion. Thinkingbox-bench reveals a large gap between occasionally finding a successful trajectory and reliably completing stateful business tasks. We release both Thinkingbox and Thinkingbox-Bench: https://github.com/microsoft/thinkingbox

Real desktop automation is neither purely visual nor purely programmatic. Agents must understand user-facing interfaces while efficiently manipulating files, scripts, and system state. However, native GUI/code coordination cannot be obtained by prompt-level tool composition. In our preliminary experiments, naively adding a code tool degrades a GUI agent, revealing that GUI/code routing must be internalized through training on high-quality hybrid data. We present OS-Helix, an end-to-end trained multimodal computer-using agent that unifies GUI actions and code execution in one action space. To construct the required supervision, we introduce application-artifact composition, pairing desktop applications with authentic file artifacts to instantiate executable Ubuntu states, and a decoupled instruction/evaluator generation pipeline that produces environment-grounded tasks whose final states can be verified regardless of the solution modality. We cold-start the policy with SFT on filtered hybrid data and further improve it through online RL in live desktop environments. For RL, we propose Step-balanced GSPO, which aggregates importance weight by action step rather than raw assistant tokens to prevent long code actions from dominating heterogeneous-action optimization. On OSWorld-Verified, OS-Helix-27B and OS-Helix-35B-A3B achieve relative improvements of 35.0% and 33.7% over their matched Qwen3.5 hybrid baselines, while OS-Helix-27B-RL further improves by 42.9% to reach 66.44% success. Ablations provide evidence consistent with contributions from learned GUI/code coordination, scalable verifiable supervision, and action step balanced optimization, while demonstrating cross-platform transfer on WindowsAgentArena. Our project homepage is at https://os-copilot.github.io/OS-Helix/.

Vision-Language-Action (VLA) models are increasingly promising for robotic manipulation, yet their real-world deployment remains bottlenecked by high inference latency and unstable asynchronous execution. This challenge is particularly pronounced in flow-matching-based VLA models, where action decoding requires multiple iterative steps conditioned on the VLM context. While efficient inference methods improve control frequency and asynchronous methods reduce execution idle time, existing approaches often fail to jointly achieve low-latency inference and accurate, temporally consistent asynchronous execution. We introduce FlashVLA, a streaming action decoding framework that addresses both challenges in a unified formulation. FlashVLA maintains a streaming action buffer with multiple chunks at different noise levels and decodes them using chunk-wise causal attention. This design allows FlashVLA to produce one executable action chunk per inference step. Moreover, its chunk-wise autoregressive formulation implicitly preserves action continuity, enabling smooth asynchronous execution without extra future-state conditioning. Across extensive simulated and real-world experiments, FlashVLA substantially improves inference speed while maintaining strong task performance. It can achieve geq30\,Hz control frequency on a single GPU with smooth asynchronous inference in real-world deployment.

Graphical User Interfaces (GUIs) are central to human-computer interaction, yet automating complex GUI tasks remains a major challenge for autonomous agents, largely due to a lack of scalable, high-quality training data. While recordings of human demonstrations offer a rich data source, they are typically long, unstructured, and lack annotations, making them difficult for agents to learn from.To address this, we introduce ShowUI-Aloha, a comprehensive pipeline that transforms unstructured, in-the-wild human screen recordings from desktop environments into structured, actionable tasks. Our framework includes four key components: A recorder that captures screen video along with precise user interactions like mouse clicks, keystrokes, and scrolls. A learner that semantically interprets these raw interactions and the surrounding visual context, translating them into descriptive natural language captions. A planner that reads the parsed demonstrations, maintains task states, and dynamically formulates the next high-level action plan based on contextual reasoning. An executor that faithfully carries out these action plans at the OS level, performing precise clicks, drags, text inputs, and window operations with safety checks and real-time feedback. Together, these components provide a scalable solution for collecting and parsing real-world human data, demonstrating a viable path toward building general-purpose GUI agents that can learn effectively from simply observing humans.

Vision-Language-Action (VLA) models provide a unified paradigm for robotic manipulation, yet their real-world deployment is often bottlenecked by execution efficiency. While existing efforts predominantly focus on compute-centric efficiency to reduce per-step inference latency, the intrinsic policy efficiency of these models remains largely unexplored. Policy efficiency is fundamentally affected by two factors, namely the effective executable length of predicted action chunks and the total physical steps required to complete a task. These two factors jointly determine the total number of forward inference calls during execution. We observe that current VLA policies struggle with planning unreliability and action redundancy, suffering from severe prediction degradation at the tail of action chunks and tending to generate unnecessarily redundant physical steps. To address this, we propose PolicyTrim, a reinforcement learning-based post-training framework that extends the reliable action chunk length and reduces redundant physical steps. For reliable chunk extension, we employ a dynamic exploration strategy that explicitly rewards the successful completion of longer executable lengths, progressively pushing the trustworthy prediction horizon to its empirical limit. For step efficiency, we design a redundancy-aware reward that directly favors successful task completions with fewer steps while penalizing unreproducible shortcuts, effectively eliminating redundant physical actions. Extensive experiments across three benchmarks and three VLA models demonstrate that PolicyTrim improves action chunk utilization by 3times and reduces physical execution steps by 51.4\%. Ultimately, our framework delivers up to a 5.83times end-to-end deployment speedup without compromising task success rates.

Executable programs offer explicit control over how images and videos are constructed, but generating runnable code is only the beginning of visual creation. A program can execute correctly while violating the requested composition, appearance, or motion. We define this discrepancy as the Program-to-Visual (P2V) gap and introduce MaLiang-Harness, a unified framework for organizing MLLM-driven visual generation into a persistent process of construction, inspection, and revision. Its central design is to make the evolving visual program, its construction history, and its verification share a common revision reference. We define the Persistent Executable Generation (PEG) state as preserving programs and task context. Traceable Generation Process (TGP) connects edits to rendered evidence, and Revision-aware Editing and Verification (REV) supports restoration and checks the current revision before completion. Together, these mechanisms coordinate planning, execution, and visual feedback across rendering backends. We evaluate 11 powerful closed-source MLLMs on MaLiang-IBench and four on MaLiang-VBench, measuring generation success, visual quality, and computational cost. GPT-6-Astra achieves 100% generation success on both benchmarks, with 96.0% of image tasks and 76.9% of video tasks meeting all quality thresholds. The comparison also reveals a mismatch between general capability scores and visual generation performance, with similarly scored models differing substantially in their ability to satisfy visual requirements. MaLiang-Harness provides a systematic basis for studying how MLLMs translate executable code into visual outcomes, exposing both the potential of programmable generation and the limitations of general benchmarks as predictors of this ability. The project is available at https://github.com/gulucaptain/MaLiang-Harness.

Large Language Model (LLM) agents, capable of performing a broad range of actions, such as invoking tools and controlling robots, show great potential in tackling real-world challenges. LLM agents are typically prompted to produce actions by generating JSON or text in a pre-defined format, which is usually limited by constrained action space (e.g., the scope of pre-defined tools) and restricted flexibility (e.g., inability to compose multiple tools). This work proposes to use executable Python code to consolidate LLM agents' actions into a unified action space (CodeAct). Integrated with a Python interpreter, CodeAct can execute code actions and dynamically revise prior actions or emit new actions upon new observations through multi-turn interactions. Our extensive analysis of 17 LLMs on API-Bank and a newly curated benchmark shows that CodeAct outperforms widely used alternatives (up to 20% higher success rate). The encouraging performance of CodeAct motivates us to build an open-source LLM agent that interacts with environments by executing interpretable code and collaborates with users using natural language. To this end, we collect an instruction-tuning dataset CodeActInstruct that consists of 7k multi-turn interactions using CodeAct. We show that it can be used with existing data to improve models in agent-oriented tasks without compromising their general capability. CodeActAgent, finetuned from Llama2 and Mistral, is integrated with Python interpreter and uniquely tailored to perform sophisticated tasks (e.g., model training) using existing libraries and autonomously self-debug.

How to efficiently finetune robot policies to learn new tasks on the fly? State of the art robotic manipulation policies are based on behaviour cloning of large vision-language-action (VLA) models with billions of parameters on huge teleoperation datasets. While this simple approach has enabled significant advances for robotic manipulation, finetuning of VLA policies for learning new tasks still remains an open problem. In particular, collecting teleoperation datasets requires hundreds of hours of expensive human labour and the alternative, reinforcement learning (RL), can be notoriously sample-inefficient especially for long-horizon tasks. In addition, RL with VLAs imposes several challenges due to the model's size and architectural design. In this work, we propose EXIMO, an efficient algorithm for finetuning of VLA policies. EXIMO operates in three stages: explore, imitate, and optimize. During the explore phase, EXIMO equips the VLA with a vision language model (VLM) that acts as a planner. The VLM thinks and breaks down challenging long-horizon problems into shorter ones for the VLA. The VLM, together with the VLA, is used to collect an orchestrated dataset on new tasks. During the imitate phase, the VLA is finetuned with the orchestrated data. Finally, during the optimize stage, we use residual off-policy RL to further finetune the policy. In our experiments, we ablate all three stages of EXIMO and show that it outperforms existing approaches significantly in terms of sample-efficiency and final performance.

Recent advances in real-time interactive text-driven motion generation have enabled humanoids to perform diverse behaviors. However, kinematics-only generators often exhibit physical hallucinations, producing motion trajectories that are physically infeasible to track with a downstream motion tracking controller or unsafe for real-world deployment. These failures often arise from the lack of explicit physics-aware objectives for real-robot execution and become more severe under out-of-distribution (OOD) user inputs. Hence, we propose SafeFlow, a text-driven humanoid whole-body control framework that combines physics-guided motion generation with a 3-Stage Safety Gate driven by explicit risk indicators. SafeFlow adopts a two-level architecture. At the high level, we generate motion trajectories using Physics-Guided Rectified Flow Matching in a VAE latent space to improve real-robot executability, and further accelerate sampling via Reflow to reduce the number of function evaluations (NFE) for real-time control. The 3-Stage Safety Gate enables selective execution by detecting semantic OOD prompts using a Mahalanobis score in text-embedding space, filtering unstable generations via a directional sensitivity discrepancy metric, and enforcing final hard kinematic constraints such as joint and velocity limits before passing the generated trajectory to a low-level motion tracking controller. Extensive experiments on the Unitree G1 demonstrate that SafeFlow outperforms prior diffusion-based methods in success rate, physical compliance, and inference speed, while maintaining diverse expressiveness.

Coding agents can construct executable programs and revise them through feedback, offering a foundation for embodied control without target-task fine-tuning. Through a programmatic robot interface, the agent observes the scene, executes control programs, and adapts them to the resulting physical state, serving as the closed-loop policy. However, this within-episode adaptation does not automatically preserve experience across scenes. Our trajectory analysis shows that agents spend interaction and inference budgets establishing effective operations and identifying their preconditions, while fresh agents cannot reuse these discoveries. This motivates EmbodiedEvo, a self-evolving coding agent that distills physical feedback into reusable code Skills and diagnostic Lessons. Experience is acquired on one Playground scene per task, then frozen for independent agents in unseen scenes, without updating model weights. On RoboDojo-Sim, EmbodiedEvo achieves an average score of 44.48 and a success rate of 37.82\%, surpassing all officially verified results. Paired tests show the largest gains on memory-dependent tasks and successful reuse of coordinated procedures, while fine contact control remains difficult. Experience from stronger models also improves weaker executors: Astra's experience raises Sol and Luna's success rates by 8.86 and 5.50 percentage points over no experience. Compared with raw interaction history, Skills and Lessons achieve comparable task performance at 53.0\% lower execution cost.

The executable harness surrounding a GUI model determines how observations are assembled, actions are executed, and verification, recovery, and termination are controlled. Compared with harness optimization for non-GUI agents, automatically optimizing this harness poses three coupled challenges: reconciling model intent with observed visual effects, diagnosing failures under variable execution outcomes, and identifying recurrent failure patterns across tasks and translating them into reusable runtime changes. We introduce GUI-HARVEST, an automatic harness optimizer that enables self-improving GUI agents with frozen backbone models. First, to ground diagnosis in observed action effects, it aligns model outputs and executed actions with before-and-after screenshots, tying findings to specific interface transitions. Second, to account for execution variability, it treats repeated runs of the same task as a joint evidence unit, using within-task comparisons to locate outcome-relevant behavioral differences. Third, it consolidates verified findings across tasks into recurring failure patterns, maps them to bounded source-code edits with predictions recorded before evaluation, and checks the predicted behavioral effects alongside task performance through repeated execution. Experiments on OSWorld-Verified show consistent held-out gains across six general-purpose open, GUI-specialized open, and proprietary backbone models; Qwen3-VL-32B-Instruct gains 12.33 points on the full suite. Frozen-harness transfer improves GPT-5 by 13.87 percentage points on WindowsAgentArena at 50 steps without further optimization. With the same backbone and initial harness, GUI-HARVEST outperforms Self-Harness and Meta-Harness, suggesting that GUI-specific diagnosis and validation help harness improvements generalize to unseen tasks. The code is available at https://github.com/GaryYang12345/GUI-HARVEST.

Diffusion models offer flexible motion generation, but translating this flexibility into feedback-responsive humanoid control remains challenging. Hierarchical systems steer motion through references that may exceed a separate tracker's capabilities, leaving recovery and physical execution largely to the tracker. Action-only diffusion generates actions directly but lacks an explicit future-state trajectory for test-time motion objectives. Joint state-action diffusion provides this representation, yet representative controllers often depend on privileged full-body states, and support for learned behavior selection and test-time motion steering remains fragmented. We present PredActor, a predictive action diffusion policy that brings these complementary steering capabilities into one directly executed policy using proprioceptive observations. Conditioned on proprioceptive history and optional task context, PredActor jointly generates executable actions and an internal future-state trajectory. Classifier-free guidance strengthens text-conditioned behavior, while classifier guidance steers predicted states toward test-time objectives. Only actions are executed, without a separate motion-reference tracker or externally estimated full-body states as policy inputs. In simulation, PredActor reaches all 15 destination targets and achieves a text retrieval score of 0.580, compared with 0.373 for conditional action diffusion, with similar observed disturbance survival. To make this guided policy practical onboard, rolling denoising and computation-preserving runtime optimizations reduce the complete callback to 16.790 ms median and 19.383 ms p95 on a Jetson Orin NX, both below the 20 ms control period. We deploy PredActor on a Unitree G1; evaluations across simulation and physical hardware demonstrate text-conditioned motion, disturbance response, joystick control, and semantic interpolation.

Coding agents increasingly rely on automated approvers to decide whether a proposed shell command may run. Existing approvers, from rule-based checkers to guardrail models and deployed permission classifiers, base their decisions on the text of the request and command. Yet a command's behavior depends on the code it invokes and the state of the workspace, and systems that observe file changes leave the assessment to the agent or a human after execution. We present Caper, a consequence-aware approval mechanism that pre-executes each command in a snapshotted sandbox, provides an independent approver with a bounded report of its observed effects, commits allowed commands, and rolls back blocked ones with a reason the agent can act on. Compared with six existing systems, Caper achieves the lowest harmful-outcome rate on SABER (6.7% versus at least 14.8%) and YoloFS-Ext, a benchmark we build in which harmful behavior is hidden inside invoked tools (7.8% versus at least 35.3%), while blocking 1.0% of the safe twins of the dangerous tasks in YoloFS-Ext.

Agentic AI systems increasingly act through heterogeneous runtimes: local coding hooks, SDK tools, browser automation, managed-agent traces, API gateways, and workflow engines. A single operational act such as publishing code, changing identity state, moving money, or exporting data may therefore be represented by many incompatible runtime records. This makes a basic governance question difficult to answer: what action was actually approved, what evidence binds the approval to execution, and can an independent verifier reproduce the same action identity later? This paper presents Canonical Action Verification and Attestation (CAVA), a runtime-semantics layer for converting heterogeneous agent activity into canonical runtime action objects. CAVA is positioned below Proof-Carrying Agent Actions (PCAA): PCAA defines the deployer-owned route-review-prove governance process, while CAVA defines the stable action object that process governs. The paper formalizes canonical action identity, semantic pattern detection, approval binding, receipt integrity, runtime-portable projection, and optional attestation substrates. We study a reference implementation through a 96-seed, 384-variant benchmark covering semantic equivalence, semantic separation, wrapper bypass, false-positive control, approval binding, receipt reproducibility, attestation tamper detection, runtime portability, semantic pattern detection, policy degradation, and Azure deployment drills. The contribution is a systems formulation of action-level canonicalization and policy-addressable semantic patterns as a necessary substrate for deployer-side AI governance.

High-fidelity motion tracking serves as the ultimate litmus test for generalizable, human-level motor skills. However, current policies often hit a "generality barrier": as motion libraries scale in diversity, tracking fidelity inevitably collapses - especially for real-world deployment of high-dynamic motions. We identify this failure as the result of two compounding factors: the learning bottleneck in scaling multi-motion optimization and the physical executability constraints that arise in real-world actuation. To overcome these challenges, we introduce OmniXtreme, a scalable framework that decouples general motor skill learning from sim-to-real physical skill refinement. Our approach uses a flow-matching policy with high-capacity architectures to scale representation capacity without interference-intensive multi-motion RL optimization, followed by an actuation-aware refinement phase that ensures robust performance on physical hardware. Extensive experiments demonstrate that OmniXtreme maintains high-fidelity tracking across diverse, high-difficulty datasets. On real robots, the unified policy successfully executes multiple extreme motions, effectively breaking the long-standing fidelity-scalability trade-off in high-dynamic humanoid control.

Vision-language-action (VLA) models map visual observations and language instructions directly to robot actions, but long-horizon tasks require more than action prediction. An agent must coordinate perception, planning, execution, progress verification, and recovery as the physical state evolves. An action prediction or a model-generated skill decision does not, by itself, guarantee that the proposed operation is valid in the current state or that its outcome will be verified. We propose EmbodiedSkills, a unified framework that treats each skill decision as an execution proposal: the runtime checks its prerequisites before execution and verifies the outcome afterward. A shared executable-skill interface connects high-level skill selection, bounded low-level VLA execution, and post-action verification within a single agent loop. Because this interface remains fixed, low-level VLA policies can be replaced or adapted without changing the agent loop. The interface also records planning, execution, verification, and recovery events as structured trajectories, which provide supervision for individual components and can support optional online adaptation when interactive feedback is available. We instantiate EmbodiedSkills with Qwen3-VL and OpenPI/pi0.5 on RoboTwin 2.0 and LIBERO. Task-adapted low-level VLA policies achieve an average success rate of 86.20% across 50 RoboTwin 2.0 tasks and 97.40% across the four LIBERO suites. These results establish the execution performance of the task-adapted low-level VLA policies used in EmbodiedSkills. On four memory-dependent RMBench tasks, the same task-adapted execution approach achieves 12.5% average success. The framework provides a trainable and inspectable agent layer for turning these policies into closed-loop embodied systems.

The human-like form of humanoid robots positions them uniquely to achieve the agility and versatility in motor skills that humans possess. Learning from human demonstrations offers a scalable approach to acquiring these capabilities. However, prior works either produce unnatural motions or rely on motion-specific tuning to achieve satisfactory naturalness. Furthermore, these methods are often motion- or goal-specific, lacking the versatility to compose diverse skills, especially when solving unseen tasks. We present BeyondMimic, a framework that scales to diverse motions and carries the versatility to compose them seamlessly in tackling unseen downstream tasks. At heart, a compact motion-tracking formulation enables mastering a wide range of radically agile behaviors, including aerial cartwheels, spin-kicks, flip-kicks, and sprinting, with a single setup and shared hyperparameters, all while achieving state-of-the-art human-like performance. Moving beyond the mere imitation of existing motions, we propose a unified latent diffusion model that empowers versatile goal specification, seamless task switching, and dynamic composition of these agile behaviors. Leveraging classifier guidance, a diffusion-specific technique for test-time optimization toward novel objectives, our model extends its capability to solve downstream tasks never encountered during training, including motion inpainting, joystick teleoperation, and obstacle avoidance, and transfers these skills zero-shot to real hardware. This work opens new frontiers for humanoid robots by pushing the limits of scalable human-like motor skill acquisition from human motion and advancing seamless motion synthesis that achieves generalization and versatility beyond training setups.

Multimodal agents for computer use rely exclusively on primitive actions (click, type, scroll) that require accurate visual grounding and lengthy execution chains, leading to cascading failures and performance bottlenecks. While other agents leverage rich programmatic interfaces (APIs, MCP servers, tools), computer-use agents (CUAs) remain isolated from these capabilities. We present UltraCUA, a foundation model that bridges this gap through hybrid action -- seamlessly integrating GUI primitives with high-level programmatic tool calls. To achieve this, our approach comprises four key components: (1) an automated pipeline that scales programmatic tools from software documentation, open-source repositories, and code generation; (2) a synthetic data engine producing over 17,000 verifiable tasks spanning real-world computer-use scenarios; (3) a large-scale high-quality hybrid action trajectory collection with both low-level GUI actions and high-level programmatic tool calls; and (4) a two-stage training pipeline combining supervised fine-tuning with online reinforcement learning, enabling strategic alternation between low-level and high-level actions. Experiments with our 7B and 32B models demonstrate substantial improvements over state-of-the-art agents. On OSWorld, UltraCUA models achieve an average 22% relative improvement over base models, while being 11% faster in terms of steps. Out-of-domain evaluation on WindowsAgentArena shows our model reaches 21.7% success rate, outperforming baselines trained on Windows data. The hybrid action mechanism proves critical, reducing error propagation while maintaining execution efficiency.

We introduce PhysicalAgent, an agentic framework for robotic manipulation that integrates iterative reasoning, diffusion-based video generation, and closed-loop execution. Given a textual instruction, our method generates short video demonstrations of candidate trajectories, executes them on the robot, and iteratively re-plans in response to failures. This approach enables robust recovery from execution errors. We evaluate PhysicalAgent across multiple perceptual modalities (egocentric, third-person, and simulated) and robotic embodiments (bimanual UR3, Unitree G1 humanoid, simulated GR1), comparing against state-of-the-art task-specific baselines. Experiments demonstrate that our method consistently outperforms prior approaches, achieving up to 83% success on human-familiar tasks. Physical trials reveal that first-attempt success is limited (20-30%), yet iterative correction increases overall success to 80% across platforms. These results highlight the potential of video-based generative reasoning for general-purpose robotic manipulation and underscore the importance of iterative execution for recovering from initial failures. Our framework paves the way for scalable, adaptable, and robust robot control.

Character animation in real-world scenarios necessitates a variety of constraints, such as trajectories, key-frames, interactions, etc. Existing methodologies typically treat single or a finite set of these constraint(s) as separate control tasks. They are often specialized, and the tasks they address are rarely extendable or customizable. We categorize these as solutions to the close-set motion control problem. In response to the complexity of practical motion control, we propose and attempt to solve the open-set motion control problem. This problem is characterized by an open and fully customizable set of motion control tasks. To address this, we introduce a new paradigm, programmable motion generation. In this paradigm, any given motion control task is broken down into a combination of atomic constraints. These constraints are then programmed into an error function that quantifies the degree to which a motion sequence adheres to them. We utilize a pre-trained motion generation model and optimize its latent code to minimize the error function of the generated motion. Consequently, the generated motion not only inherits the prior of the generative model but also satisfies the required constraints. Experiments show that we can generate high-quality motions when addressing a wide range of unseen tasks. These tasks encompass motion control by motion dynamics, geometric constraints, physical laws, interactions with scenes, objects or the character own body parts, etc. All of these are achieved in a unified approach, without the need for ad-hoc paired training data collection or specialized network designs. During the programming of novel tasks, we observed the emergence of new skills beyond those of the prior model. With the assistance of large language models, we also achieved automatic programming. We hope that this work will pave the way for the motion control of general AI agents.

Evaluating whether a vision-language model (VLM) can act through a physical body is challenging. The outcome of an action couples the VLM's decision with motor control. When a task fails, it is hard to tell whether the VLM made a bad choice or the motor controller simply failed to execute it, e.g., losing balance and falling. In this work, we introduce HumanCLAW, an evaluation framework that decouples action decision-making from low-level execution. At every step, a harnessed, off-the-shelf VLM issues an atomic skill command, and the command is translated into a sub-second chunk of continuous full-body motion with real physical consequences, including gravity and collisions. The body can therefore act freely in the physical world, while execution-side disturbances, balance and motor errors, are factored out. What remains measurable is the model's action intelligence: its moment-to-moment choice of what the body should execute next. Based on this framework, we build HumanCLAW-Bench: 1,218 long-horizon, egocentric find-navigate-interact episodes across 41 indoor scenes. We test nine state-of-the-art VLMs and find that none solves the benchmark; the best model reaches only a 16.8% success rate. Recognizing the target is not the bottleneck. What current VLMs lack is embodied self-awareness: they lose track of their own body, failing to tell where it is, whether it has reached the goal, or whether it has hit an obstacle.

End-to-end GUI agents for real desktop environments require large amounts of high-quality interaction data, yet collecting human demonstrations is expensive and existing synthetic pipelines often suffer from limited task diversity or noisy, goal-drifting trajectories. We present a trajectory expansion framework Anchor that bootstraps scalable desktop supervision from a small set of verified seed demonstrations. Starting from each seed, we identify branch points that correspond to meaningful state changes and propose new, state-grounded task variants conditioned on the current GUI context. An executing agent then follows the proposed instructions to generate new trajectories, while a verifier enforces task completion via state-aware checks and trajectory-level consistency. To improve supervision quality, we further apply task-conditioned step-level filtering to remove ungrounded actions and denoise post-branch segments to maintain coherent intent. Experiments on standard desktop benchmarks, OSWorld and WindowsAgentArena, show that models fine-tuned on our expanded corpus achieve consistent improvements over zero-shot agents and representative synthesis baselines, and generalize across applications and operating systems.

Path-velocity decomposition is an intuitive yet powerful approach to address the complexity of kinodynamic motion planning. The difficult trajectory planning problem is solved in two separate, simpler, steps: first, find a path in the configuration space that satisfies the geometric constraints (path planning), and second, find a time-parameterization of that path satisfying the kinodynamic constraints. A fundamental requirement is that the path found in the first step should be time-parameterizable. Most existing works fulfill this requirement by enforcing quasi-static constraints in the path planning step, resulting in an important loss in completeness. We propose a method that enables path-velocity decomposition to discover truly dynamic motions, i.e. motions that are not quasi-statically executable. At the heart of the proposed method is a new algorithm -- Admissible Velocity Propagation -- which, given a path and an interval of reachable velocities at the beginning of that path, computes exactly and efficiently the interval of all the velocities the system can reach after traversing the path while respecting the system kinodynamic constraints. Combining this algorithm with usual sampling-based planners then gives rise to a family of new trajectory planners that can appropriately handle kinodynamic constraints while retaining the advantages associated with path-velocity decomposition. We demonstrate the efficiency of the proposed method on some difficult kinodynamic planning problems, where, in particular, quasi-static methods are guaranteed to fail.

A fine-tuned Vision-Language-Action (VLA) policy can easily place the alphabet soup in the basket on command, just as it saw during fine-tuning. However, if the basket is shifted five centimeters to the left, it drops the soup off the table. We developed an interpretability pipeline to investigate what such a policy is computing. Injecting task A's activations into the action expert while the policy looks at task B's scene makes pi0.5 execute task A's motor trajectory in 99.6\% of episodes (n{=}1{,}968). The injected program is bound to absolute workspace coordinates and ignores the visible scene, which provides a mechanistic account of the perturbation brittleness that concurrent benchmarks report. The binding holds on a physical UR10e: directed replay redirects the commanded task in 26/26 rollouts in one direction and 18/26 in the other, with no-injection and random-direction controls at the floor, and once the source object is moved 10--15\,cm the arm grasps and releases at the recorded coordinates in 50/50 trials, picking up the wrong block when one sits there and closing on empty air when none does. Applying the same interventions to six VLAs on LIBERO, MetaWorld, SimplerEnv, and ALOHA over 420{,}000+ rollouts yields three further findings: every architecture encodes the instruction, and four of the five weight it below vision whenever the scene alone identifies the goal; under the standard replacement write-back the SAE pooling that preserves behavior is architecture-specific (pi0.5 per-token, SmolVLA indifferent), and goal selection and motor generation separate into VLM and expert pathways wherever the two are distinguishable. We release Action Atlas (https://action-atlas.com), an interactive platform covering all 520+ trained SAEs, 79 identified concepts, and the scored UR10e rollouts. Code: https://github.com/CWRU-AISM/action-atlas

We propose a unified framework for motion control in video generation that seamlessly integrates camera movement, object-level translation, and fine-grained local motion using trajectory-based inputs. In contrast to prior methods that address these motion types through separate modules or task-specific designs, our approach offers a cohesive solution by projecting user-defined trajectories into the latent space of pre-trained image-to-video generation models via a lightweight motion injector. Users can specify keypoints and their motion paths to control localized deformations, entire object motion, virtual camera dynamics, or combinations of these. The injected trajectory signals guide the generative process to produce temporally consistent and semantically aligned motion sequences. Our framework demonstrates superior performance across multiple video motion control tasks, including stylized motion effects (e.g., motion brushes), dynamic viewpoint changes, and precise local motion manipulation. Experiments show that our method provides significantly better controllability and visual quality compared to prior approaches and commercial solutions, while remaining broadly compatible with various state-of-the-art video generation backbones. Project page: https://anytraj.github.io/.

We present a new test-time optimization method for estimating dense and long-range motion from a video sequence. Prior optical flow or particle video tracking algorithms typically operate within limited temporal windows, struggling to track through occlusions and maintain global consistency of estimated motion trajectories. We propose a complete and globally consistent motion representation, dubbed OmniMotion, that allows for accurate, full-length motion estimation of every pixel in a video. OmniMotion represents a video using a quasi-3D canonical volume and performs pixel-wise tracking via bijections between local and canonical space. This representation allows us to ensure global consistency, track through occlusions, and model any combination of camera and object motion. Extensive evaluations on the TAP-Vid benchmark and real-world footage show that our approach outperforms prior state-of-the-art methods by a large margin both quantitatively and qualitatively. See our project page for more results: http://omnimotion.github.io/

Existing computer-use agents remain fundamentally limited in professional software manipulation: GUI-based agents suffer from fragile visual grounding and long-horizon error accumulation, while API-basedapproaches struggle with heterogeneous protocols and inaccessible commercial interfaces. In this work,we identify the Component Object Model (COM) as a unified executable abstraction, proposing COM-as-Action: a new paradigm that reframes professional software interaction as deterministic program synthesisrather than sequential visual control. To validate this paradigm in the most demanding environments, weintroduce ComCADBench, the first benchmark for agents operating real industrial CAD software. Ourexperiments reveal a substantial paradigm gap: frontier proprietary models achieve near-zero successunder GUI-based interaction, whereas COM-based execution yields substantial immediate gains. Tobridge the remaining gap between syntactic correctness and geometric accuracy, we develop ComActor, aself-correcting agent trained through a progressive three-stage framework, alongside ComForge, a scalableplatform for large-scale training in Windows containers. Extensive experiments show that ComActorachieves state-of-the-art performance on ComCADBench, with strong resilience in long-horizon taskswhere baselines collapse, and generalizes to external CAD benchmark.

Human motion generation and editing are key components of computer graphics and vision. However, current approaches in this field tend to offer isolated solutions tailored to specific tasks, which can be inefficient and impractical for real-world applications. While some efforts have aimed to unify motion-related tasks, these methods simply use different modalities as conditions to guide motion generation. Consequently, they lack editing capabilities, fine-grained control, and fail to facilitate knowledge sharing across tasks. To address these limitations and provide a versatile, unified framework capable of handling both human motion generation and editing, we introduce a novel paradigm: Motion-Condition-Motion, which enables the unified formulation of diverse tasks with three concepts: source motion, condition, and target motion. Based on this paradigm, we propose a unified framework, MotionLab, which incorporates rectified flows to learn the mapping from source motion to target motion, guided by the specified conditions. In MotionLab, we introduce the 1) MotionFlow Transformer to enhance conditional generation and editing without task-specific modules; 2) Aligned Rotational Position Encoding} to guarantee the time synchronization between source motion and target motion; 3) Task Specified Instruction Modulation; and 4) Motion Curriculum Learning for effective multi-task learning and knowledge sharing across tasks. Notably, our MotionLab demonstrates promising generalization capabilities and inference efficiency across multiple benchmarks for human motion. Our code and additional video results are available at: https://diouo.github.io/motionlab.github.io/.

Executable environments are critical for post-training agents on tasks that require tool use and multi-step interaction, but constructing executable tasks together with their environments remains difficult to scale. Skills provide reusable domain knowledge, operational procedures, and tool-use instructions, but a substantial gap remains between the information contained in a skill and a concrete, challenging task with a complete executable environment. To address this gap, we introduce Skill2Env, a capability-oriented framework that starts from a skill and uses agent capability demands to guide task and environment synthesis. Skill2Env represents these demands through reusable difficulty patterns and instantiates them into task blueprints that specify objectives, challenges, environment facts, information boundaries, and acceptance criteria. These blueprints guide the joint construction of task instructions, execution substrates, workspaces, and rubric-based evaluators around source skills. We further propose Iterative Task Hardening, which uses solver execution evidence to identify insufficiently challenging task designs, strengthen or extend their difficulty-pattern instantiations, and revise the corresponding blueprints and environments. Using 1.5K high-scoring trajectories generated from Skill2Env environments for supervised fine-tuning, we observe consistent improvements across a broad range of agent benchmarks, demonstrating the effectiveness of capability-oriented environment synthesis for agent post-training.

Recent vision-language-action (VLA) systems have demonstrated strong capabilities in embodied manipulation. However, most existing VLA policies rely on limited observation windows and end-to-end action prediction, which makes them brittle in long-horizon, memory-dependent tasks with partial observability, occlusions, and multi-stage dependencies. Such tasks require not only precise visuomotor control, but also persistent memory, adaptive task decomposition, and explicit recovery from execution failures. To address these limitations, we propose a dual-system framework for long-horizon embodied manipulation. Our framework explicitly separates high-level semantic reasoning from low-level motor execution. A high-level planner, implemented as a VLM-based agentic module, maintains structured task memory and performs goal decomposition, outcome verification, and error-driven correction. A low-level executor, instantiated as a VLA-based visuomotor controller, carries out each sub-task through diffusion-based action generation conditioned on geometry-preserving filtered observations. Together, the two systems form a closed loop between planning and execution, enabling memory-aware reasoning, adaptive replanning, and robust online recovery. Experiments on representative RMBench tasks show that the proposed framework substantially outperforms representative baselines, achieving a 32.4% average success rate compared with 9.8% for the strongest baseline. Ablation studies further confirm the importance of structured memory and closed-loop recovery for long-horizon manipulation.

The acquisition of agentic capabilities has transformed LLMs from "knowledge providers" to "action executors", a trend that while expanding LLMs' capability boundaries, significantly increases their susceptibility to malicious use. Previous work has shown that current LLM-based agents execute numerous malicious tasks even without being attacked, indicating a deficiency in agentic use safety alignment during the post-training phase. To address this gap, we propose AgentAlign, a novel framework that leverages abstract behavior chains as a medium for safety alignment data synthesis. By instantiating these behavior chains in simulated environments with diverse tool instances, our framework enables the generation of highly authentic and executable instructions while capturing complex multi-step dynamics. The framework further ensures model utility by proportionally synthesizing benign instructions through non-malicious interpretations of behavior chains, precisely calibrating the boundary between helpfulness and harmlessness. Evaluation results on AgentHarm demonstrate that fine-tuning three families of open-source models using our method substantially improves their safety (35.8% to 79.5% improvement) while minimally impacting or even positively enhancing their helpfulness, outperforming various prompting methods. The dataset and code have both been open-sourced.

Recent advances in humanoid whole-body motion tracking have enabled the execution of diverse and highly coordinated motions on real hardware. However, existing controllers are commonly driven either by predefined motion trajectories, which offer limited flexibility when user intent changes, or by continuous human teleoperation, which requires constant human involvement and limits autonomy. This work addresses the problem of how to drive a universal humanoid controller in a real-time and interactive manner. We present TextOp, a real-time text-driven humanoid motion generation and control framework that supports streaming language commands and on-the-fly instruction modification during execution. TextOp adopts a two-level architecture in which a high-level autoregressive motion diffusion model continuously generates short-horizon kinematic trajectories conditioned on the current text input, while a low-level motion tracking policy executes these trajectories on a physical humanoid robot. By bridging interactive motion generation with robust whole-body control, TextOp unlocks free-form intent expression and enables smooth transitions across multiple challenging behaviors such as dancing and jumping, within a single continuous motion execution. Extensive real-robot experiments and offline evaluations demonstrate instant responsiveness, smooth whole-body motion, and precise control. The project page and the open-source code are available at https://text-op.github.io/

Video reward optimization can increase proxy rewards while reducing video dynamics, a mismatch we identify as motion collapse, including under a video-level motion-quality reward. We propose GraftOOD, which replaces part of the online rollouts in selected prompt groups with out-of-distribution video exemplars. A shared velocity-regression objective combines group-relative reward rectification with sequence-level exemplar supervision, requiring neither exemplar generation trajectories nor an additional supervised-loss coefficient. We characterize its pointwise optimal field as a source-posterior-weighted combination of the two source-specific target fields. We construct GraftSet-Video, containing 9,588 format-matched exemplars for 2,397 prompts, to supply external supervision. On Wan2.1-1.3B, GraftOOD raises Dynamic Degree from 4.86 to 44.41 relative to reward-only FlowAWR, while HPSv3 decreases from 8.10 to 7.32 and VisionReward remains close. At the main setting, GraftOOD leads nine of ten metrics among three exemplar-augmented methods. Ablations of exemplar frequency and within-group count reveal dynamics--reward trade-offs rather than uniform gains from increasing exemplar usage. These results support external exemplar supervision as a complement to scalar reward feedback, without equating higher measured dynamics with coherent, visually plausible motion in the generated videos. Code is available at https://github.com/Fuzm7/FlowAWR{GraftOOD}.

Recent advancements in visual language models (VLMs) have notably enhanced their capabilities in handling complex Graphical User Interface (GUI) interaction tasks. Despite these improvements, current frameworks often struggle to generate correct actions in challenging GUI environments. State-of-the-art commercial VLMs are black-boxes, and fine-tuning open-source VLMs for GUI tasks requires significant resources. Additionally, existing trajectory-level evaluation and refinement techniques frequently fall short due to delayed feedback and local optimization issues. To address these challenges, we propose an approach that guides VLM agents with process supervision by a reward model during GUI navigation and control at inference time. This guidance allows the VLM agent to optimize actions at each inference step, thereby improving performance in both static and dynamic environments. In particular, our method demonstrates significant performance gains in three GUI navigation tasks, achieving a 3.4% improvement in single step action accuracy for static environments, along with a around 33% increase in task success rate in one dynamic environment. With further integration of trajectory reflection and retry mechanisms, we also demonstrate even greater enhancement in task success.

Intelligent agent naturally learns from motion. Various self-supervised algorithms have leveraged motion cues to learn effective visual representations. The hurdle here is that motion is both ambiguous and complex, rendering previous works either suffer from degraded learning efficacy, or resort to strong assumptions on object motions. In this work, we design a new learning-from-motion paradigm to bridge these gaps. Instead of explicitly modeling the motion probabilities, we design the pretext task as a conditional motion propagation problem. Given an input image and several sparse flow guidance vectors on it, our framework seeks to recover the full-image motion. Compared to other alternatives, our framework has several appealing properties: (1) Using sparse flow guidance during training resolves the inherent motion ambiguity, and thus easing feature learning. (2) Solving the pretext task of conditional motion propagation encourages the emergence of kinematically-sound representations that poss greater expressive power. Extensive experiments demonstrate that our framework learns structural and coherent features; and achieves state-of-the-art self-supervision performance on several downstream tasks including semantic segmentation, instance segmentation, and human parsing. Furthermore, our framework is successfully extended to several useful applications such as semi-automatic pixel-level annotation. Project page: "http://mmlab.ie.cuhk.edu.hk/projects/CMP/".

We present Wan-Move, a simple and scalable framework that brings motion control to video generative models. Existing motion-controllable methods typically suffer from coarse control granularity and limited scalability, leaving their outputs insufficient for practical use. We narrow this gap by achieving precise and high-quality motion control. Our core idea is to directly make the original condition features motion-aware for guiding video synthesis. To this end, we first represent object motions with dense point trajectories, allowing fine-grained control over the scene. We then project these trajectories into latent space and propagate the first frame's features along each trajectory, producing an aligned spatiotemporal feature map that tells how each scene element should move. This feature map serves as the updated latent condition, which is naturally integrated into the off-the-shelf image-to-video model, e.g., Wan-I2V-14B, as motion guidance without any architecture change. It removes the need for auxiliary motion encoders and makes fine-tuning base models easily scalable. Through scaled training, Wan-Move generates 5-second, 480p videos whose motion controllability rivals Kling 1.5 Pro's commercial Motion Brush, as indicated by user studies. To support comprehensive evaluation, we further design MoveBench, a rigorously curated benchmark featuring diverse content categories and hybrid-verified annotations. It is distinguished by larger data volume, longer video durations, and high-quality motion annotations. Extensive experiments on MoveBench and the public dataset consistently show Wan-Move's superior motion quality. Code, models, and benchmark data are made publicly available.

This work introduces MotionLCM, extending controllable motion generation to a real-time level. Existing methods for spatial control in text-conditioned motion generation suffer from significant runtime inefficiency. To address this issue, we first propose the motion latent consistency model (MotionLCM) for motion generation, building upon the latent diffusion model (MLD). By employing one-step (or few-step) inference, we further improve the runtime efficiency of the motion latent diffusion model for motion generation. To ensure effective controllability, we incorporate a motion ControlNet within the latent space of MotionLCM and enable explicit control signals (e.g., pelvis trajectory) in the vanilla motion space to control the generation process directly, similar to controlling other latent-free diffusion models for motion generation. By employing these techniques, our approach can generate human motions with text and control signals in real-time. Experimental results demonstrate the remarkable generation and controlling capabilities of MotionLCM while maintaining real-time runtime efficiency.

Motion imitation is a promising approach for humanoid locomotion, enabling agents to acquire humanlike behaviors. Existing methods typically rely on high-quality motion capture datasets such as AMASS, but these are scarce and expensive, limiting scalability and diversity. Recent studies attempt to scale data collection by converting large-scale internet videos, exemplified by Humanoid-X. However, they often introduce physical artifacts such as floating, penetration, and foot skating, which hinder stable imitation. In response, we introduce PHUMA, a Physically-grounded HUMAnoid locomotion dataset that leverages human video at scale, while addressing physical artifacts through careful data curation and physics-constrained retargeting. PHUMA enforces joint limits, ensures ground contact, and eliminates foot skating, producing motions that are both large-scale and physically reliable. We evaluated PHUMA in two sets of conditions: (i) imitation of unseen motion from self-recorded test videos and (ii) path following with pelvis-only guidance. In both cases, PHUMA-trained policies outperform Humanoid-X and AMASS, achieving significant gains in imitating diverse motions. The code is available at https://davian-robotics.github.io/PHUMA.

Graphical user interface (GUI) agents have advanced rapidly but still struggle with complex tasks involving novel UI elements, long-horizon actions, and personalized trajectories. In this work, we introduce Instruction Agent, a GUI agent that leverages expert demonstrations to solve such tasks, enabling completion of otherwise difficult workflows. Given a single demonstration, the agent extracts step-by-step instructions and executes them by strictly following the trajectory intended by the user, which avoids making mistakes during execution. The agent leverages the verifier and backtracker modules further to improve robustness. Both modules are critical to understand the current outcome from each action and handle unexpected interruptions(such as pop-up windows) during execution. Our experiments show that Instruction Agent achieves a 60% success rate on a set of tasks in OSWorld that all top-ranked agents failed to complete. The Instruction Agent offers a practical and extensible framework, bridging the gap between current GUI agents and reliable real-world GUI task automation.

While Large Language Models (LLMs) have substantially advanced text-to-code synthesis, many real programming tasks specify intent through visual artifacts such as screenshots, charts, vector drawings, videos, and interactive states. These tasks require models to connect visual perception to executable programs, because correctness depends not only on syntax but also on layout, data semantics, interaction behavior, and domain-specific constraints that apply after execution. This survey examines Multimodal Code Intelligence, covering systems that generate, edit, refine, or reason with code under visually grounded inputs and outputs. We first formulate the field by the role that code plays in each task, distinguishing code as a rendered artifact, an editable symbolic structure, a scientific representation, an intermediate reasoning trace, or an executable policy or tool interface. We then organize benchmarks and methods into four domains: Graphical User Interface, Scientific Visualization, Structured Graphics, and Frontier Tasks and Frameworks. This taxonomy connects mature artifact-generation problems to emerging agentic and unified settings and allows us to compare how different tasks treat evidence of correctness. Looking ahead, we argue that future research may benefit from four verification-centered directions. Multi-signal validation can combine complementary evidence of correctness, multi-state verification can test behavior across execution trajectories, cross-task transfer testing can probe reusable visual-code skills, and verifiable agent traces can reveal whether agent actions are grounded in visual evidence. Together, these directions may move this field from single-output imitation toward evidence-grounded executable systems. An ongoing project and resources are available on https://github.com/xjywhu/Awesome-Multimodal-LLM-for-Code{GitHub}.

Physical AI aims to build embodied agents that perceive the world, understand and reason about it, and decide how to act. Yet the field has focused primarily on the last component: the action model that maps observations to low-level controls. The prevailing training recipe can erode the perceptual and reasoning capabilities needed for robust behavior, leaving even strong action models vulnerable to scene perturbations and long-horizon tasks. We introduce HarnessPAI, a model- and embodiment-agnostic Harness framework for Physical AI that treats code as the executable and evolvable interface that organizes the underlying action primitive. The framework separates two timescales: within a rollout, it executes open-loop at the program level, with a fixed program guiding and checking execution; across rollouts, it evolves closed-loop, using execution feedback to revise the program and distill failures into reusable skills. Across desktop robot arms, household robots, a robot vacuum, and a legged walking agent, HarnessPAI demonstrates consistent improvements against baselines. Beyond the harness, the converged program also acts as a low-cost, reliable source of expert data: it generates training data for fine-tuning VLA and WAM models on tasks where it is hard for these models to obtain successful trajectories on their own. Our results suggest that the frontier of Physical AI depends not only on stronger action models, but also on executable harnesses that integrate perception, task understanding and reasoning, and action execution into a unified, verifiable, and feedback-driven system. Website: https://darwin-agent.github.io/HarnessPAI

LLM coding agents are increasingly deployed to act autonomously on real production infrastructure. They execute shell commands, modify repositories, and call operational APIs. However, completing a task is not sufficient for safety. A wrong action can cause severe consequences. Existing agent benchmarks largely emphasize task completion, leaving open how agents behave under benign but underspecified instructions. We present UnderSpecBench, a benchmark for measuring action-boundary violations in coding agents (i.e., Claude Code, Codex, and OpenCode) on DevOps tasks. UnderSpecBench includes 69 task families grounded in documented incidents, CVEs, or tool behavior and organized across four DevOps capability domains and nine operational control surfaces. To isolate underspecification from task difficulty, each task keeps the same environment and ground-truth safe action while varying the instruction along three axes: intent clarity, target certainty, and blast radius. The resulting 2,208 prompt variants are evaluated with deterministic, side-effect-based oracles that separate Safe Success, Wrong Target, and OverScope outcomes; non-action runs are further classified as clarification, refusal, or deferment. Across five agent x model configurations using OpenCode, Claude Code, and Codex, the evaluation results show that underspecification does not mainly make agents fail; it makes them guess. 55.8-67.8% of runs violate at least one boundary. Target underspecification sharply degrades action quality, while blast-radius cues barely reduce action propensity. These findings show that completion-centric evaluation can overstate safe autonomy and motivate mitigations at the model, harness, and system layer.

Animating images with interactive motion control has garnered popularity for image-to-video (I2V) generation. Modern approaches typically rely on large Gaussian kernels to extend motion trajectories as condition without explicitly defining movement region, leading to coarse motion control and failing to disentangle object and camera moving. To alleviate these, we present MotionPro, a precise motion controller that novelly leverages region-wise trajectory and motion mask to regulate fine-grained motion synthesis and identify target motion category (i.e., object or camera moving), respectively. Technically, MotionPro first estimates the flow maps on each training video via a tracking model, and then samples the region-wise trajectories to simulate inference scenario. Instead of extending flow through large Gaussian kernels, our region-wise trajectory approach enables more precise control by directly utilizing trajectories within local regions, thereby effectively characterizing fine-grained movements. A motion mask is simultaneously derived from the predicted flow maps to capture the holistic motion dynamics of the movement regions. To pursue natural motion control, MotionPro further strengthens video denoising by incorporating both region-wise trajectories and motion mask through feature modulation. More remarkably, we meticulously construct a benchmark, i.e., MC-Bench, with 1.1K user-annotated image-trajectory pairs, for the evaluation of both fine-grained and object-level I2V motion control. Extensive experiments conducted on WebVid-10M and MC-Bench demonstrate the effectiveness of MotionPro. Please refer to our project page for more results: https://zhw-zhang.github.io/MotionPro-page/.

Humans learn locomotion through visual observation, interpreting visual content first before imitating actions. However, state-of-the-art humanoid locomotion systems rely on either curated motion capture trajectories or sparse text commands, leaving a critical gap between visual understanding and control. Text-to-motion methods suffer from semantic sparsity and staged pipeline errors, while video-based approaches only perform mechanical pose mimicry without genuine visual understanding. We propose RoboMirror, the first retargeting-free video-to-locomotion framework embodying "understand before you imitate". Leveraging VLMs, it distills raw egocentric/third-person videos into visual motion intents, which directly condition a diffusion-based policy to generate physically plausible, semantically aligned locomotion without explicit pose reconstruction or retargeting. Extensive experiments validate the effectiveness of RoboMirror, it enables telepresence via egocentric videos, drastically reduces third-person control latency by 80%, and achieves a 3.7% higher task success rate than baselines. By reframing humanoid control around video understanding, we bridge the visual understanding and action gap.

Vision-Language-Action (VLA) models can turn multimodal context into robot actions, but their action decoders are still trained largely by behavior cloning. This supervises which motor command was demonstrated while leaving implicit the local objective served by the behavior under the instruction. Future-based supervision enriches action learning with frames, latent observations, trajectories, or motion representations, but these signals capture particular realizations of what may happen rather than the shared semantic objective of the forthcoming behavior. We propose Intention Distillation (INDI), which distills behavior-level intent into the action decoder. During training, a frozen teacher VLM interprets a demonstrated segment from the current observation, instruction, coarse action summary, and corresponding execution video. From its standard inputs, the deployed VLA recovers the resulting multimodal intent representation at an intermediate decoder layer and uses it to organize action prediction together with representations of how the behavior unfolds and what it achieves. On SimplerEnv-Bridge, INDI improves GR00T-N1.7 from 64.3% to 84.7%, and on RoboCasa Kitchen it improves the controlled GR00T-N1.7 baseline from 64.1% to 70.3%, with consistent gains on π_{0.5} across both benchmarks. In real-world tasks, INDI improves average success from 62.0% to 68.7%, with gains of up to 12.0 pp on longer-horizon tasks. Further analyses show that the recovered latent is used by the decoder, captures behavior objective and execution progress, and organizes downstream predictions in an objective-dependent manner. These results show that action decoders benefit from explicitly modeling the semantic objective of the behavior they generate.

How well can general-purpose multimodal models turn visual understanding and reasoning into embodied manipulation via executable code? We introduce CodeActionBench, a benchmark of 25 manipulation tasks that evaluates this capability through agentic Code-as-Policy. Without task-specific fine-tuning, demonstrations, external specialist perception or grasp modules, privileged scene state, or predefined task policies, agents should select visual evidence, form task-relevant 3D estimates, construct manipulation targets, and iteratively execute and revise their policies. A shared robot API provides RGB observations, calibrated geometric operations, robot feedback, and bounded motion, leaving task-dependent decisions to the evaluated agent. Fixed task instances, resource budgets, and a hidden physical-outcome verifier support controlled comparisons across models and harness configurations. Extensive evaluations across nine configurations and 675 attempts achieve success rates ranging from 2.7% to 73.3%. The strongest configuration, GPT-6 Astra with Codex CLI, solves 22 of 25 tasks at least once in three attempts, demonstrating the best performance while still leaving substantial room for improvement. Trajectory analyses reveal difficulties in spatial alignment, object retention, and completion judgment, including task failures despite successfully completed motions. CodeActionBench provides a controlled testbed for measuring how general-purpose models translate their capabilities into manipulation behavior and for examining typical failure scenarios in that process.

Video-based world models generate visually plausible rollouts, but since they infer dynamics in latent states, they enforce no explicit physical constraints: contacts drift, shapes distort, and motion loses consistency. We present ChronoAgentic, a multi-agent framework that instead constructs the world as executable simulation code. The plan agent converts the natural-language prompt into a structured scene plan that the user can inspect and approve. The code agent implements the plan as an executable PyChrono program, grounded in a curated skill library, a generative 3D asset pipeline, and retrieval over the simulator source. After execution, the visual-analysis agent describes the rendered rollout, while deterministic physics checks scan the simulated trajectories for anomalies. The review agent evaluates this execution evidence, and the code agent iteratively repairs the program until it satisfies the plan objectives and physical constraints. On a suite of 80 demos selected from the PhyWorldBench benchmark, ChronoAgentic satisfies the benchmark's full correctness criterion--semantic adherence and physical correctness judged jointly---on 82.5% of demos, against 52.5% for the strongest of ten text-to-video models, scored under the same criterion on their officially released benchmark videos. The same construction loop extends to interactive use, including a live ROS driving environment in a generated city. The project page is available at https://uwsbel.github.io/chrono-agentic-website/.

We present Move-Then-Operate, a Vision language action framework that explicitly decouples robotic manipulation into two distinct behavioral phases: coarse relocation (move) and contact-critical interaction (operate). Unlike monolithic policies that conflate these heterogeneous regimes, our architecture employs a dual-expert policy routed by a learnable phase selector, introducing a structural inductive bias that isolates phase-specific dynamics. Phase labels are automatically generated via an MLLM-based pipeline conditioned on lightweight contextual cues such as end-effector velocity and subtask decomposition to ensure alignment with human motor patterns. Evaluated on the RoboTwin2 benchmark, our method achieves an average success rate of 68.9%, outperforming the monolithic π_0 baseline by 24%. It matches or exceeds models trained on 10times more data and reaches peak performance in 40% fewer training steps, demonstrating that architectural disentanglement of move and operate phases is a highly effective and efficient strategy for mastering high-precision manipulation.

Vision-Language-Action (VLA) models excel in robotic manipulation but suffer catastrophic performance drops when canonical instructions are simply paraphrased. Although this brittleness is typically addressed through costly data scaling, our probing reveals that the root cause is architectural rather than a lack of semantic understanding. Specifically, we demonstrate that current VLAs successfully retain the correct task identity internally. The failure actually stems from the joint encoding of dynamic visual observations and text, which introduces systematic feature shifts. Because the downstream action policy is highly vulnerable to these variations, it fails to translate the preserved semantics into correct control commands. To resolve this structural bottleneck, we propose Grounded Semantic Re-binding (GSR), an elegant intervention that bypasses unstable joint routing by explicitly fusing independently extracted task semantics with native visual features to train a completely re-initialized action expert from scratch. This targeted intervention dramatically restores paraphrastic invariance using only canonical demonstrations. On the LIBERO-Para benchmark, GSR improves success rates by up to 44.6 percent. It enables lightweight models to rival massively scaled baselines and pushes state-of-the-art models to a new record PRIDE score of 70.4, outperforming the recently introduced large-scale pretrained model Xiaomi-Robotics-0 in instruction generation capabilities. Building on these insights, we also introduce ParaVLA, a natively decoupled 0.33B-parameter model exhibiting near-perfect robustness to instruction rewording. Ultimately, our work proves that robust semantic grounding can be achieved through elegant structural design, bypassing the inefficient brute-force data scaling paradigm.

Video generation models can now depict remarkably realistic motion. Yet it is unclear how to use this motion beyond pixels: to animate a specific 3D asset and replay the animation in its 3D scene. For instance, a video model can show a monkey jumping over a crossbar, but it cannot return that jump as replayable 3D motion placed in the 3D scene. Here we present a model that directly co-generates the video and 3D motion for any supplied rig, along with a camera that registers this motion to the scene. Prior video-motion models either handle only human skeletons, often adding billions of parameters, or triangulate 3D motion from generated 2D pose maps. We instead keep 3D motion in a separate model that supports arbitrary skeletons, and connect it to a pretrained video model through a small set of cross-attention layers. This separation lets the motion model first learn how skeletons move from motion-only data, which is easier to obtain and augment than paired video. Additionally, our model learns to locate each joint in the video frames, which lets us recover the camera and place the 3D motion in the scene. To train across many skeletons, we use a generative video editor to place animated 3D assets in scenes suited to their actions, curating the edits so their known motion remains valid. Together with human and robot video, this yields nearly 200K training pairs. Our evaluations demonstrate that our model animates diverse rigs from text more faithfully than video-first pipelines, and its motion responds to the surrounding scene. It also turns video into rig motion, rig motion into video, and enables keyframe-based control of the 3D motion. Videos and additional results are available on our project page: https://research.nvidia.com/labs/par/projects/jca/.

Training terminal agents requires scalable executable supervision, yet synthesizing high-quality terminal tasks remains challenging. Each task couples an instruction, an initialized environment, a reference solution, and an executable verifier; if these artifacts are generated from inconsistent assumptions, the resulting task may be unsolvable or incorrectly evaluated. Meanwhile, multi-stage synthesis can discard the goals, dependencies, state transitions, and procedural constraints encoded in the original sources. We present FACET (Fine-grained Agentic Construction of Executable Tasks), a framework that addresses both information preservation and cross-artifact consistency. FACET reconstructs related agent skills into coherent, information-rich scenarios, then realizes and repairs the execution environment before generating the final task artifacts. The resulting container state serves as shared grounding for the instruction, solution, and verifier, while execution-based validation and targeted repair correct artifact-specific failures without unnecessarily regenerating valid components. FACET produces complex terminal tasks with dense executable checks, and successful trajectories collected from these tasks provide effective, data-efficient supervision. Fine-tuning models across multiple scales consistently improves performance on Terminal-Bench 2.1, while analyses of alternative generation schemes support the importance of environment-grounded construction for task validity and solution-verifier alignment. These results establish source-intent preservation and shared executable-state grounding as key principles for scalable terminal-task synthesis.

Enabling humanoid robots to achieve natural and dynamic locomotion across a wide range of speeds, including smooth transitions from walking to running, presents a significant challenge. Existing deep reinforcement learning methods typically require the policy to directly track a reference motion, forcing a single policy to simultaneously learn motion imitation, velocity tracking, and stability maintenance. To address this, we introduce RuN, a novel decoupled residual learning framework. RuN decomposes the control task by pairing a pre-trained Conditional Motion Generator, which provides a kinematically natural motion prior, with a reinforcement learning policy that learns a lightweight residual correction to handle dynamical interactions. Experiments in simulation and reality on the Unitree G1 humanoid robot demonstrate that RuN achieves stable, natural gaits and smooth walk-run transitions across a broad velocity range (0-2.5 m/s), outperforming state-of-the-art methods in both training efficiency and final performance.

Enabling robots to execute novel manipulation tasks zero-shot is a central goal in robotics. Most existing methods assume in-distribution tasks or rely on fine-tuning with embodiment-matched data, limiting transfer across platforms. We present NovaFlow, an autonomous manipulation framework that converts a task description into an actionable plan for a target robot without any demonstrations. Given a task description, NovaFlow synthesizes a video using a video generation model and distills it into 3D actionable object flow using off-the-shelf perception modules. From the object flow, it computes relative poses for rigid objects and realizes them as robot actions via grasp proposals and trajectory optimization. For deformable objects, this flow serves as a tracking objective for model-based planning with a particle-based dynamics model. By decoupling task understanding from low-level control, NovaFlow naturally transfers across embodiments. We validate on rigid, articulated, and deformable object manipulation tasks using a table-top Franka arm and a Spot quadrupedal mobile robot, and achieve effective zero-shot execution without demonstrations or embodiment-specific training. Project website: https://novaflow.lhy.xyz/.

Human demonstrations as prompts are a powerful way to program robots to do long-horizon manipulation tasks. However, translating these demonstrations into robot-executable actions presents significant challenges due to execution mismatches in movement styles and physical capabilities. Existing methods either depend on human-robot paired data, which is infeasible to scale, or rely heavily on frame-level visual similarities that often break down in practice. To address these challenges, we propose RHyME, a novel framework that automatically aligns human and robot task executions using optimal transport costs. Given long-horizon robot demonstrations, RHyME synthesizes semantically equivalent human videos by retrieving and composing short-horizon human clips. This approach facilitates effective policy training without the need for paired data. RHyME successfully imitates a range of cross-embodiment demonstrators, both in simulation and with a real human hand, achieving over 50\% increase in task success compared to previous methods. We release our code and datasets at https://portal-cornell.github.io/rhyme/.

Humans perform long-horizon manipulation by retaining knowledge of what earlier actions have established while continuously adapting the motion underway. By contrast, action-chunked vision-language-action (VLA) policies repeatedly replan from the current input at each query. Existing methods preserve either long-term task evidence through memory or short-term motion through action reuse and ensembling, leaving the cross-query handoff incomplete. We introduce ChainVLA, a 1.2B-parameter VLA policy that chains successive queries through a joint and revisable execution state. Progress Context combines a recurrent Working State with sparse event memory to carry observation-derived task progress, while Motion Tail feeds the preceding prediction's unexecuted continuation into state construction and action generation. Together, the two components condition a decoder that regenerates each action horizon under the latest observation, allowing the carried state to guide the next prediction without fixing it. ChainVLA reaches 62.8% average success on RMBench and 98.8% across four LIBERO suites, while removing Motion Tail or Progress Context reduces RMBench success to 11.2% and 3.0%, respectively. These asymmetric ablations are consistent with motion continuity helping preserve the observation stream from which task progress is inferred.

Offline Imitation Learning (IL) methods such as Behavior Cloning are effective at acquiring complex robotic manipulation skills. However, existing IL-trained policies are confined to executing the task at the same speed as shown in demonstration data. This limits the task throughput of a robotic system, a critical requirement for applications such as industrial automation. In this paper, we introduce and formalize the novel problem of enabling faster-than-demonstration execution of visuomotor policies and identify fundamental challenges in robot dynamics and state-action distribution shifts. We instantiate the key insights as SAIL (Speed Adaptation for Imitation Learning), a full-stack system integrating four tightly-connected components: (1) a consistency-preserving action inference algorithm for smooth motion at high speed, (2) high-fidelity tracking of controller-invariant motion targets, (3) adaptive speed modulation that dynamically adjusts execution speed based on motion complexity, and (4) action scheduling to handle real-world system latencies. Experiments on 12 tasks across simulation and two real, distinct robot platforms show that SAIL achieves up to a 4x speedup over demonstration speed in simulation and up to 3.2x speedup in the real world. Additional detail is available at https://nadunranawaka1.github.io/sail-policy

Forward latent world models predict how actions change a scene, but recover actions for a desired change only through expensive test-time search. We introduce INTACT (INtent-To-ACTion), an end-to-end JEPA that turns action-labeled, reward-free trajectories into a deployable intent-to-action interface. Each transition supplies physical intent z_{t+1}-z_t, while a future goal supplies deployment intent sg(z_g)-z_t. The architecture is isomorphic between the local and goal motion-intent backbone-input graphs through an identical four-slot grammar and shared parameters, and between supported local and goal motion-intent families through action-law semantics induced by the same predictor rather than pointwise latent equality. INTACT also provides intact transfer from RGB evidence to action-effective latent intent coordinates and from intent families to their corresponding action-law families. Asymmetric endpoint gradients ground physical successors and fix future goals as anchors, joining representation learning and control without pointwise latent matching or globally linear dynamics. The resulting coordinates support a robust distributional action law: its conditional mean serves directly as a search-free policy, while sampling remains available for diversity or optional verification. On the four official LeWM tasks, one-epoch, zero-search models reach 85.78\%, 100.00\%, 97.67\%, and 97.89\% success. Optional local CEM centered on the Direct plan reaches 96.86\% macro success using 384 instead of 9,000 candidate sequences, reducing sampling by 23.44times while improving pure CEM by 16.00 points. One shared four-task encoder reaches 89.39\% E5 Direct macro and improves every task over jointly trained LeWM, while predicted--expert action-family kNN tracks Direct success at r=0.954. Direct inference takes 2.9--5.5 ms.

Code LLMs still struggle with code execution reasoning, especially in smaller models. Existing methods rely on supervised fine-tuning (SFT) with teacher-generated explanations, primarily in two forms: (1) input-output (I/O) prediction chains and (2) natural-language descriptions of execution traces. However, intermediate execution steps cannot be explicitly verified during SFT, so the training objective can reduce to merely matching teacher explanations. Moreover, training data is typically collected without explicit control over task difficulty. We introduce ExecVerify, which goes beyond text imitation by incorporating verifiable white-box rewards derived from execution traces, including next-statement prediction and variable value/type prediction. Our work first builds a dataset with multiple difficulty levels via constraint-based program synthesis. Then, we apply reinforcement learning (RL) to reward correct answers about both intermediate execution steps and final outputs, aligning the training objective with semantic correctness at each execution step. Finally, we adopt a two-stage training pipeline that first enhances execution reasoning and then transfers to code generation. Experiments demonstrate that a 7B model trained with ExecVerify achieves performance comparable to 32B models on code reasoning benchmarks and improves pass@1 by up to 5.9\% on code generation tasks over strong post-training baselines.

Large-scale foundation models (LFMs) have recently made impressive progress in text-to-motion generation by learning strong generative priors from massive 3D human motion datasets and paired text descriptions. However, how to effectively and efficiently leverage such single-purpose motion LFMs, i.e., text-to-motion synthesis, in more diverse cross-modal and in-context motion generation downstream tasks remains largely unclear. Prior work typically adapts pretrained generative priors to individual downstream tasks in a task-specific manner. In contrast, our goal is to unlock such priors to support a broad spectrum of downstream motion generation tasks within a single unified framework. To bridge this gap, we present UMO, a simple yet general unified formulation that casts diverse downstream tasks into compositions of atomic per-frame operations, enabling in-context adaptation to unlock the generative priors of pretrained DiT-based motion LFMs. Specifically, UMO introduces three learnable frame-level meta-operation embeddings to specify per-frame intent and employs lightweight temporal fusion to inject in-context cues into the pretrained backbone, with negligible runtime overhead compared to the base model. With this design, UMO finetunes the pretrained model, originally limited to text-to-motion generation, to support diverse previously unsupported tasks, including temporal inpainting, text-guided motion editing, text-serialized geometric constraints, and multi-identity reaction generation. Experiments demonstrate that UMO consistently outperforms task-specific and training-free baselines across a wide range of benchmarks, despite using a single unified model. Code and model will be publicly available. Project Page: https://oliver-cong02.github.io/UMO.github.io/

Humanoid robots are promising to acquire various skills by imitating human behaviors. However, existing algorithms are only capable of tracking smooth, low-speed human motions, even with delicate reward and curriculum design. This paper presents a physics-based humanoid control framework, aiming to master highly-dynamic human behaviors such as Kungfu and dancing through multi-steps motion processing and adaptive motion tracking. For motion processing, we design a pipeline to extract, filter out, correct, and retarget motions, while ensuring compliance with physical constraints to the maximum extent. For motion imitation, we formulate a bi-level optimization problem to dynamically adjust the tracking accuracy tolerance based on the current tracking error, creating an adaptive curriculum mechanism. We further construct an asymmetric actor-critic framework for policy training. In experiments, we train whole-body control policies to imitate a set of highly-dynamic motions. Our method achieves significantly lower tracking errors than existing approaches and is successfully deployed on the Unitree G1 robot, demonstrating stable and expressive behaviors. The project page is https://kungfu-bot.github.io.

Industrial advertising recommender systems are continually improved through architecture modifications, yet production iteration remains expert-intensive because coordinated changes to model topology, feature configuration, and interaction modules must satisfy strict interface, resource, and serving constraints. AutoML is limited to predefined search spaces, while generic coding agents verify runnability rather than recommender-specific semantic validity. Executable candidates may therefore violate architectural contracts, while the lack of structured reuse of semantic diagnostics and evaluation outcomes can lead to repeated invalid or ineffective modifications. We present NOVA, a verification-aware agent harness that organizes production architecture modification as multi-round search over concrete implementations within a fixed evaluation budget. At each round, NOVA generates multiple candidates under production constraints, rejects semantic violations, and ranks the valid survivors for local testing and offline evaluation. Across rounds, trajectory memory synthesizes semantic diagnostics, local-test outcomes, and offline metric changes into modification directions and forbidden patterns that guide subsequent search. Under the same maximum offline-evaluation budget for automated methods, NOVA achieves the highest effective pass rate, reaching 53.3% on ScaleUp and 51.7% on Literature-to-Production tasks. In a production A/B test covering 5% of traffic in an advertising system serving over one billion users, the selected Literature-to-Production candidate yields GMV gains of +1.25%, +1.70%, and +2.02% across three major pCVR objectives, with corresponding relative reductions in absolute pCVR bias of 58.8%, 66.7%, and 37.3%, respectively.

Vision-language-action models, world models, and agentic planners each advance physical intelligence, yet their composition lacks a common execution abstraction, shared state, semantic verification, and persistent experience across heterogeneous embodiments. We present PhyAgentOS, a runtime foundation delivering scheduling, verification, memory, benchmarking, and safety as system-level services. Its Session-Centered Runtime treats a session, not an action, as the minimum unit of scheduling, compatibility preflight, supervised execution, evidence collection, and acceptance. To decouple cognition from physical execution, the cognition-physics boundary is a file system: the State-as-a-File protocol materializes cross-layer state as Markdown with YAML, yielding inspectable, versionable records without code dependencies between Agent and Runtime layers. These views form a unified cognitive state space aligning intent, capabilities, environment, execution, and experience. The SessionVerifier distinguishes execution termination from semantic task completion via evidence-grounded verdicts of success, failure, or replan. Verified outcomes are consolidated through epistemic memory into reusable knowledge and corrective lessons, closing a trial-and-error loop without retraining. Benchmarking reuses the deployment session and verification path, so results trace to real execution. Layered safety constrains both policy-driven and agent-driven execution: preflight, action bridges, SafetyGuard, heartbeat monitoring, and target-local constraints. Validation is progressive: games test cognitive planning, simulation adds dynamics and control, real robots add hardware noise, with the cognitive layer held constant. PhyAgentOS is benchmarked on Optimus-67, StarDojo, and DST-Dojo, validated on 19+ simulated and physical embodiments, and gains on LIBERO, Calvin, and RoboCasa365 across multiple VLA models.

Animating articulated 3D meshes via text requires satisfying strict kinematic constraints, modeling causal interactions between parts, and achieving instruction fidelity. Due to the absence of task-specific training data and explicit articulation supervision, existing data-driven mesh animation methods are largely inapplicable to this setting. To address this, we propose ArtiMo, a novel agent-driven framework for text-guided articulated mesh animation. Operating in a zero-shot manner, ArtiMo develops an agentic pipeline powered by Large Language and Vision-Language Models (LLMs/VLMs) to orchestrate motion generation. By synergizing the explicit kinematic constraints of URDF with the agent's reasoning and planning capabilities, it effectively produces causally coherent part motions and interactions without requiring model fine-tuning. To ensure motion correctness, the agent additionally utilizes a visual self-improvement mechanism: generated animations are rendered into compact keyframes and motion cues, enabling the VLM to iteratively diagnose and correct errors. Furthermore, we contribute a new benchmark dataset spanning 21 articulated object categories, featuring high-quality motion annotations enriched with causal relationships. Extensive experiments demonstrate that ArtiMo significantly outperforms baselines, particularly on complex, causally driven motions. The project page is available at https://zou-2004.github.io/ArtiMo/.

We propose DemoDiffusion, a simple and scalable method for enabling robots to perform manipulation tasks in natural environments by imitating a single human demonstration. Our approach is based on two key insights. First, the hand motion in a human demonstration provides a useful prior for the robot's end-effector trajectory, which we can convert into a rough open-loop robot motion trajectory via kinematic retargeting. Second, while this retargeted motion captures the overall structure of the task, it may not align well with plausible robot actions in-context. To address this, we leverage a pre-trained generalist diffusion policy to modify the trajectory, ensuring it both follows the human motion and remains within the distribution of plausible robot actions. Our approach avoids the need for online reinforcement learning or paired human-robot data, enabling robust adaptation to new tasks and scenes with minimal manual effort. Experiments in both simulation and real-world settings show that DemoDiffusion outperforms both the base policy and the retargeted trajectory, enabling the robot to succeed even on tasks where the pre-trained generalist policy fails entirely. Project page: https://demodiffusion.github.io/

Vision-Language-Action (VLA) models have achieved remarkable breakthroughs in robotics, with the action chunk playing a dominant role in these advances. Given the real-time and continuous nature of robotic motion control, the strategies for fusing a queue of successive action chunks have a profound impact on the overall performance of VLA models. Existing methods suffer from jitter, stalling, or even pauses in robotic action execution, which not only limits the achievable execution speed but also reduces the overall success rate of task completion. This paper introduces VLA-RAIL (A Real-Time Asynchronous Inference Linker), a novel framework designed to address these issues by conducting model inference and robot motion control asynchronously and guaranteeing smooth, continuous, and high-speed action execution. The core contributions of the paper are two fold: a Trajectory Smoother that effectively filters out the noise and jitter in the trajectory of one action chunk using polynomial fitting and a Chunk Fuser that seamlessly align the current executing trajectory and the newly arrived chunk, ensuring position, velocity, and acceleration continuity between two successive action chunks. We validate the effectiveness of VLA-RAIL on a benchmark of dynamic simulation tasks and several real-world manipulation tasks. Experimental results demonstrate that VLA-RAIL significantly reduces motion jitter, enhances execution speed, and improves task success rates, which will become a key infrastructure for the large-scale deployment of VLA models.

Recent advancements in image animation have utilized diffusion models to breathe life into static images. However, existing controllable frameworks typically rely on Lagrangian motion guidance, where optical flow is estimated relative to the initial frame. This paper revisits the same optical-flow primitive through a more local supervision design: we use adjacent-frame Eulerian motion fields to guide generation, where the motion signal always describes a short temporal hop. This shift enables parallelized training and provides bounded-error supervision throughout the generation process. To mitigate the drift artifacts common in adjacent frame generation, we introduce a Bidirectional Geometric Consistency mechanism, which computes a forward-backward cycle check to mathematically identify and mask occluded regions, preventing the model from learning incorrect warping objectives. Extensive experiments demonstrate that our approach accelerates training, preserves temporal coherence, and reduces dynamic artifacts compared to reference-based baselines.

Code Executing Reasoning is becoming a new non-functional metric that assesses the ability of large language models (LLMs) in programming tasks. State-of-the-art frameworks (CodeMind or REval) and benchmarks (CruxEval) usually focus on LLM's prediction of a given code's input/output or intermediate variable states/values on limited programs. However, there is no tool for more in-depth analysis of the results. Without such a tool, the observations about LLM's code execution reasoning cannot be generalized to more datasets, preventing the research community and practitioners from devising the next generation of LLMs with better code execution reasoning abilities. This paper introduces ExeRScope, a series of tools and heuristics to analyze the result of code execution reasoning frameworks to understand better the impact of code properties in the studied benchmarks on the code execution reasoning. With such tooling, analysis can be generalized to code with similar properties without the urgent need to design more benchmarks, which is a cumbersome effort.

Human motion driven control (HMDC) is an effective approach for generating natural and compelling robot motions while preserving high-level semantics. However, establishing the correspondence between humans and robots with different body structures is not straightforward due to the mismatches in kinematics and dynamics properties, which causes intrinsic ambiguity to the problem. Many previous algorithms approach this motion retargeting problem with unsupervised learning, which requires the prerequisite skill sets. However, it will be extremely costly to learn all the skills without understanding the given human motions, particularly for high-dimensional robots. In this work, we introduce CrossLoco, a guided unsupervised reinforcement learning framework that simultaneously learns robot skills and their correspondence to human motions. Our key innovation is to introduce a cycle-consistency-based reward term designed to maximize the mutual information between human motions and robot states. We demonstrate that the proposed framework can generate compelling robot motions by translating diverse human motions, such as running, hopping, and dancing. We quantitatively compare our CrossLoco against the manually engineered and unsupervised baseline algorithms along with the ablated versions of our framework and demonstrate that our method translates human motions with better accuracy, diversity, and user preference. We also showcase its utility in other applications, such as synthesizing robot movements from language input and enabling interactive robot control.