new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 16

Loop-$μ$P: Residual Scaling and Hyperparameter Transfer in Looped Transformers

Looped Transformers have drawn growing attention because looping improves multi-step reasoning and increases the executed depth of a model without adding parameters. They achieve this by reusing a stack of L layers for N loops. However, increasing the loop count N not only destabilizes training but also shifts the best hyperparameters, so they must be searched again for every loop count. Inspired by Depth-μP (Yang et al., 2024), which multiplies each residual branch by L^{-1/2} for depth L so that a learning rate tuned on a shallow untied network transfers to a deep one, we study how the residual branches and the learning rate should scale with the loop count N. We find that loops cannot simply be treated as extra depth, because the loops share weights. At initialization, distinct layers add nearly uncorrelated increments to the residual stream, so their sum grows as L, whereas a shared layer adds positively correlated increments at every loop, so their sum grows linearly in N. For a single layer looped N times, we show in the infinite-width limit that multiplying the residual branch by 1/N and keeping the learning rate independent of N is the only parameterization with both a stable forward pass and maximal residual-stream updates. We then generalize the analysis to a stack of L distinct layers looped N times to obtain a parameterization we call Loop-μP, in which the loop factor 1/N combines with the depth factor L^{-1/2}. Empirically, we find in language modeling that the base learning rate tuned on the smallest model stays best under Loop-μP for loop counts up to 8 and executed depths up to 384 layers. These results make Loop-μP a practical recipe for scaling looped Transformers.

  • 7 authors
·
Oct 17

Replacement Learning: Training Neural Networks with Fewer Parameters

End-to-end training with full-depth backpropagation remains the dominant paradigm for optimizing deep neural networks, but its efficiency deteriorates as models grow deeper. Since every block must be executed and differentiated under a single global objective, full-depth BP introduces substantial parameter redundancy, activation-memory cost, and training latency, especially when neighboring layers exhibit highly correlated learning patterns. Directly skipping or removing layers can reduce cost, but often weakens representation capacity or requires architecture-specific reuse designs. In this paper, we propose Replacement Learning (RepL), a training-time paradigm that reduces full-depth redundancy by replacing selected blocks rather than simply discarding them. For each removed block, RepL inserts a lightweight computing layer that synthesizes a surrogate operator from the parameters of its adjacent preceding and succeeding blocks through a learnable transformation, and applies the synthesized operator to the preceding activation. In this way, RepL preserves local contextual continuity while avoiding unnecessary full-layer computation. We instantiate RepL for CNNs and ViTs with tailored parameter-fusion blocks that handle convolutional channels, feature resolutions, and transformer submodules. Extensive experiments on CIFAR-10, SVHN, STL-10, ImageNet, COCO, and CityScapes show that RepL reduces trainable parameters, GPU memory usage, and training time while matching or surpassing standard end-to-end training across classification, detection, and segmentation. Additional results on WikiText-2, transfer learning, inference throughput, checkpointing, stochastic depth, and INT8 quantization further demonstrate its generality and compatibility.

  • 8 authors
·
May 18

Looped State-Space Language Models with Adaptive Exit-State Selection

Recent work on looped language models suggests that many reasoning problems benefit from greater computational depth rather than from additional independent parameters. Existing studies, however, focus almost exclusively on Transformer backbones, leaving open whether this principle also applies to state-space language models. We investigate Looped Mamba and Looped Hybrid Mamba-Transformer architectures, which repeatedly apply a shared Mamba (or hybrid) block to introduce explicit finite-depth recurrent computation. On two controlled reasoning tasks-Mano (modular-arithmetic manipulation) and p-hop induction-Looped Mamba consistently outperforms parameter-matched non-looped baselines and, in several settings, matches or exceeds non-looped models of equal effective depth. We then extend the study to language model pre-training under matched iso-parameter and iso-FLOPs protocols, which jointly disentangle the effects of parameter sharing and effective depth: looped models remain competitive on downstream benchmarks with substantially fewer distinct parameters, although deeper non-looped models retain an advantage in validation perplexity under strict iso-FLOPs comparisons. Finally, we adapt Ouro's two-stage exit gate to Looped Mamba for threshold-controlled selection among recurrent-step outputs. Since all recurrent steps are still executed, the selected exit step represents prediction depth rather than reduced wall-clock computation. At the scales studied, adaptive exit-state selection improves downstream performance at intermediate depths, while actual inference-time savings require additional state-handling mechanisms.

  • 4 authors
·
Jul 10

Retrofitting Recurrent Depth into a Pretrained Language Model: Installation, Extrapolation, Transfer, and Retention at Two Parameter Budgets

A dense, pretrained language model can be retrofitted with recurrent depth and learn an iterative latent transition that persists after outcome-only annealing. Qwen2.5-0.5B-Instruct is split into a Prelude, a weight-tied Recurrent Block, and a Coda, with an identity-preserving one-loop path and a re-entry bridge on later loops. At loop 1 the retrofit remains non-inferior to its base on a preregistered ARC battery. Three findings. First, the mechanism is a reusable procedure rather than terminal-answer lookup, and installs at two budgets: 6M trained parameters over frozen base weights and 180M full-block. With intermediate-step supervision, the model computes one task step per loop and persists when only final answers are graded. The adapter matched the full block overall (83.8% versus 84.0%), led through depth 11, and trailed beyond. Verbal fine-tuning reached 79-86% on controlled verbal renderings (zero-shot transfer was minimal), and adapter verbal training begun from the installed mechanism outpaced matched fresh training by 18.6 points, including on a held-out test set. Second, the operation extrapolates to roughly 1.5 times its supervised depth, holding 70% accuracy through depth 18. Third, a same-size scratchpad-trained model matched the recurrent model within its learned horizon but collapsed beyond it. The recurrent model won overall, 84% versus 72%, retained 53% versus 2.5% beyond depth 10, and answered 7.6 times faster. An iterative transformer can therefore perform deeper reasoning in latent space faster than comparable or larger models fine-tuned on the same task, in a system-level comparison. A second task, running the rule in reverse, exposed the limits: the inverse was learnable in isolation, but no continuation acquired it while preserving the installed mechanism and general capability, a catastrophic-interference boundary. Learned depth selection remains open.

  • 1 authors
·
Jul 30

Do Language Models Use Their Depth Efficiently?

Modern LLMs are increasingly deep, and depth correlates with performance, albeit with diminishing returns. However, do these models use their depth efficiently? Do they compose more features to create higher-order computations that are impossible in shallow models, or do they merely spread the same kinds of computation out over more layers? To address these questions, we analyze the residual stream of the Llama 3.1 and Qwen 3 family of models. We find: First, comparing the output of the sublayers to the residual stream reveals that layers in the second half contribute much less than those in the first half, with a clear phase transition between the two halves. Second, skipping layers in the second half has a much smaller effect on future computations and output predictions. Third, for multihop tasks, we are unable to find evidence that models are using increased depth to compose subresults in examples involving many hops. Fourth, we seek to directly address whether deeper models are using their additional layers to perform new kinds of computation. To do this, we train linear maps from the residual stream of a shallow model to a deeper one. We find that layers with the same relative depth map best to each other, suggesting that the larger model simply spreads the same computations out over its many layers. All this evidence suggests that deeper models are not using their depth to learn new kinds of computation, but only using the greater depth to perform more fine-grained adjustments to the residual. This may help explain why increasing scale leads to diminishing returns for stacked Transformer architectures.

  • 3 authors
·
May 20, 2025

Is Your Long-Horizon Benchmark Really Deep? Measuring and Synthesizing Depth in Terminal Tasks

Long-horizon terminal tasks are used to evaluate and train agents. Human-curated datasets are scarce, so many synthesis methods have emerged. They usually measure the length of a task by the turns a model needs to pass it, and its difficulty by labels the LLM sets during generation. We find, however, that the turn count largely reflects the habits of the model, not only the demands of the task, and that the labels barely track how often models pass. We describe a terminal task by its work, the number of operations it requires, and its depth, the number of turns that must happen in sequence because the commands of each turn can only be chosen after reading the output of the previous one. Estimating depth as the smallest turn cap, stated to the agent, under which the task passes, we audit 734 tasks from six existing datasets. Synthesis has mostly added work, not depth: 94% of the solved synthetic tasks pass within three turns, yet depth, unlike the turn count, predicts difficulty beyond work. We propose DEPTH, in which a generation agent writes each task one segment at a time in a real software environment, carrying out each segment before writing it and starting the next from the state it leaves. Our 105 tasks exceed every audited dataset in depth and work, and none of six current models passes half of them. Fine-tuning Qwen3-8B on runs from these tasks improves it on two terminal benchmarks.

  • 9 authors
·
Oct 31 5

WANDR: A Benchmark for Wide and Deep Research

WANDR (Wide ANd Deep Research) is a benchmark of 500 realistic, challenging data-collection tasks for research agents. Each task requires a system to discover a large set of entities that satisfy specified criteria (breadth), investigate each entity through multiple coordinated web searches (depth), and return independently verifiable records with supporting sources and excerpts. Tasks are represented as qualification key hierarchies that specify the entities, relationships, evidence, and required count at each level; a hierarchy with n companies, m employees per company, and k sources per employee requires n x m x k records. This structure supports diverse workflows such as market mapping, due diligence, literature review, product comparison, and talent sourcing, with targets ranging from dozens to thousands of records. WANDR replaces static gold answer sets with task-specific judges that refetch cited pages and verify each record against its evidence, allowing evaluation of current and changing facts. Record verdicts are aggregated into soft and hard precision, recall, and F1 scores that distinguish factual quality, coverage, and hierarchical completeness. The tasks are derived from de-identified product-usage logs and produced through a semi-automated pipeline with automated checks, empirical audits, and human review where needed. We evaluate six production research systems and find that the benchmark is far from saturated: at high effort, the strongest system reaches only 0.363 soft F1 and 0.133 hard F1. Performance degrades as target volume and hierarchy depth increase, with incomplete discovery, missing enrichment, and incomplete evidence construction remaining major bottlenecks. The benchmark and evaluation harness are available at https://github.com/perplexityai/wandr.

  • 10 authors
·
Aug 13

daVinci-LLM:Towards the Science of Pretraining

The foundational pretraining phase determines a model's capability ceiling, as post-training struggles to overcome capability foundations established during pretraining, yet it remains critically under-explored. This stems from a structural paradox: organizations with computational resources operate under commercial pressures that inhibit transparent disclosure, while academic institutions possess research freedom but lack pretraining-scale computational resources. daVinci-LLM occupies this unexplored intersection, combining industrial-scale resources with full research freedom to advance the science of pretraining. We adopt a fully-open paradigm that treats openness as scientific methodology, releasing complete data processing pipelines, full training processes, and systematic exploration results. Recognizing that the field lacks systematic methodology for data processing, we employ the Data Darwinism framework, a principled L0-L9 taxonomy from filtering to synthesis. We train a 3B-parameter model from random initialization across 8T tokens using a two-stage adaptive curriculum that progressively shifts from foundational capabilities to reasoning-intensive enhancement. Through 200+ controlled ablations, we establish that: processing depth systematically enhances capabilities, establishing it as a critical dimension alongside volume scaling; different domains exhibit distinct saturation dynamics, necessitating adaptive strategies from proportion adjustments to format shifts; compositional balance enables targeted intensification while preventing performance collapse; how evaluation protocol choices shape our understanding of pretraining progress. By releasing the complete exploration process, we enable the community to build upon our findings and systematic methodologies to form accumulative scientific knowledge in pretraining.

SII-GAIR-NLP SII-GAIR
·
Mar 28 2

PAR: Progress-Aligned Recurrence for Length Generalization in State Tracking

Looped language models can run more iterations at test time, but additional iterations need not help them solve longer problems. For sequential state tracking, final-answer supervision does not specify how far each iteration should advance, and repeated updates can change the scale of the recurrent state. We introduce Progress-Aligned Recurrence (PAR), which trains the prediction at iteration k to match the state after the first k operations and rescales recurrent states to their first-iteration norms. On swap-S_5, a Qwen2.5-0.5B model trained on at most 32 moves achieves 95.5\% mean full-state accuracy at 512 moves, or 16times the training length, compared with 55.7\% reported for RLT and 0.8\% for explicit chain of thought on the same backbone. Controlled S_5 ablations show that removing norm anchoring reduces the extrapolation factor from 16times to below 2.2times, and replacing progress-aligned targets with final-answer supervision reduces it to at most 8times. A learned completion readout selects when to answer without a supplied stopping depth. When intermediate labels are unavailable, prefix self-distillation induces the correspondence from shorter problem prefixes using only final answers. The gains apply across sequential state-tracking tasks, establishing the task structure required for depth extrapolation. These findings support training intermediate predictions and state scale together to make additional recurrent depth useful for longer problems.

Residual Stream Duality in Modern Transformer Architectures

Recent work has made clear that the residual pathway is not mere optimization plumbing; it is part of the model's representational machinery. We agree, but argue that the cleanest way to organize this design space is through a two-axis view of the Transformer. A decoder evolves information along two ordered dimensions: sequence position and layer depth. Self-attention already provides adaptive mixing along the sequence axis, whereas the residual stream usually performs fixed addition along the depth axis. If we fix a token position and treat layer index as the ordered variable, then a causal depth-wise residual attention read is exactly the same local operator as causal short sliding-window attention (ShortSWA), except written over depth rather than over sequence. This is the core residual stream duality behind Transformer^2. This perspective also clarifies the recent literature. ELC-BERT and DenseFormer already show that learned aggregation over depth can outperform uniform residual accumulation, while Vertical Attention, DeepCrossAttention (DCA), MUDDFormer, and Attention Residuals move further toward explicit attention-based routing over earlier layers. The key point, however, is that operator-level duality does not imply systems-level symmetry. For large-scale autoregressive models, sequence-axis ShortSWA is usually the more hardware-friendly placement because it reuses token-side sliding-window kernels, KV-cache layouts, and chunked execution. If the goal is instead to change the shortcut itself, Deep Delta Learning (DDL) is the cleaner intervention because it modifies the residual operator directly rather than adding a separate cross-layer retrieval path. Our recommendation is therefore simple: use DDL when the shortcut is the object of interest, and use sequence-axis ShortSWA when the goal is local adaptive mixing.

math-ai math-ai
·
Mar 16 2

LayerRoPE: Dynamic Depth-wise Magnitude & Angular Superposition

As data propagates through a Transformer, the norm of its hidden states grows by orders of magnitude with depth, a phenomenon framed as 'curse of depth' and nearly universally treated as a pathology to be suppressed. We take the opposite view. Across 16 pre-trained LLMs from 9 families, spanning dense, mixture-of-experts and hybrid architectures and Pre-, Peri- and Post-Norm designs, we find that this growth reflects an emergent depth-positional encoding, carried by the only learned per-layer gain on the residual stream, the normalization weight γ: with depth, γ grows in magnitude and rotates in direction, jointly encoding the layer index. We make this depth-conditioned encoding explicit with LayerRoPE, an implicit analog of RoPE along the depth axis, which replaces all layerwise γ vectors with a single shared vector and depth-conditioned scalars, at a net reduction in parameters and <0.02% change in FLOPs. Across a model ladder scaled up to 100B+ tokens, LayerRoPE consistently outperforms Pre-, Post- and Peri-Norm and Layer-Norm Scaling, reaching Pre-Norm's 1.3B loss with 3.4times less compute; LayerRoPE is the only approach that shows strong convergence and improves near monotonically as depth scales to 512 layers. It improves learning-rate sensitivity by 3-10times, and transfers naively to and consistently improves looped latent models and Vision Transformers. Inspecting its learned schedule inverts the prevailing premise: LayerRoPE does not shrink the residual stream but widens it, damping what each block reads while amplifying what it writes. Depth stability, our results suggest, calls not for suppressing the residual stream, but for depth-conditioned regulation of the computational blocks it feeds.

  • 2 authors
·
Oct 5

Looped Transformers under the Jacobian Lens: Does the Global Workspace Survive Recurrence?

Recent work identifies a mid-depth band of verbalisable, causally potent representations in a standard feedforward transformer --- a functional analogue of a global workspace. Whether the same workspace functionality emerges when depth is implemented through recurrence rather than a stack of distinct layers remains unknown. Looped and depth-recurrent transformers provide a direct test of this question because they reuse the same weights across depth. We extend the Jacobian lens to iterated architectures using a virtual-unrolling adapter. We apply the full workspace suite --- lens fitting, readout, and eleven causal experiment families --- to Ouro-2.6B (48 layers looped 4 times, deeply supervised) and Huginn-0125 (a 4-layer core recurred 16 times, trained for latent reasoning), using Qwen3.6-27B (64 untied layers) as the standard baseline. We find that a workspace forms in the iterated part of each architecture, but that recurrence changes how it can be accessed. Ouro reconstructs workspace content in every loop, and linear transport cannot carry that content across loop boundaries; writes and ablations must therefore span every remaining loop. Huginn carries content forward across all sixteen recurrences, while reads, writes, and ablations act only within a sliding window of roughly two recurrences. Whether newly injected content can be verbalised tracks explicit per-iteration supervision; whether existing content can be steered does not.

  • 2 authors
·
Aug 31

Omni2Web: Benchmarking Audiovisual Website Development

Screen-recorded web editing requests contain weak deictic expressions such as ``this'' and ``there,'' whose referents depend on speech, cursor trajectories, page state, and edit history. Such requests require intent recovery beyond the explicit specifications assumed by many existing web-editing benchmarks. We introduce Omni2Web, a bilingual benchmark of 918 instances spanning 13,907 edit steps. It defines three complementary tracks: Direct Editing evaluates webpage editing from recordings, Instruction Recovery measures explicit intent recovery, and Instruction Utility tests whether recovered instructions can drive a fixed code executor. We evaluate 17 open- and closed-source models. The best models attain 51.17 on the Edit Fidelity Score (EFS) for Direct Editing and 49.14 on the Instruction Recovery Score (IRS); under the fixed executor, the strongest recovered instructions reach 51.08 EFS, still far below the 89.69 EFS obtained with oracle instructions. Step-level analyses show that correct grounding does not guarantee successful edits, while some Omni models recover instructions that the fixed coding model executes substantially better than their direct edits. Controlled ablations further demonstrate the value of temporally aligned audiovisual evidence, while alternative judges preserve the leader and broad ordering. Together, these findings reveal substantial headroom in multimodal intent recovery and code execution and highlight the promise of pairing Omni rewriters with coding models.

  • 10 authors
·
Sep 19

Accepted but Wrong: Silent Failures of LLM Code Repairs after API Migrations

After a runtime or API migration, an LLM-repaired procedure can run cleanly yet return wrong results, and a release check on typical test inputs ships it. We report a preregistered study of 73 tasks covering 60 documented changes in CPython, Node.js and SQLite. Every candidate is executed on the real runtimes against withheld contracts. Over the complete repair space, the all-assertions gate on typical inputs released 0.410 of wrong repairs. One edge input written from the release note cut this to 0.065, and to 0.061 on 15 unseen clusters. Three inputs from a blind GPT-5.6-luna writer that never saw the program reached 0.070. Two further frozen stages enlarged the menu to 1491 fragments and then added 233 hard distractors that match the legacy output on typical inputs. The edge input (0.058) and the frontier-model writer (0.058) passed their preregistered tests. Yet 0.168 and 0.153 of the hard wrong programs still passed. Two local-model writers failed their preregistered tests. Across four model families, the edge input cut wrong releases per attempt in all three open-weight families on all three menus, for example from 0.233 to 0.057, without lowering correct completion. Self-tests helped less. A blind AI audit flagged 34 contracts as stricter than their requirements. Dropping the disputed checks changed 0 verdicts, but class-label disputes remain open. No model-written code was executed. Artifacts are available from the authors on request.

Echoverse: Deep, Evolving Environments for Training Computer-Use Agents at Scale

Computer-use agents learn from what their actions change, so training one needs applications it can act on, break and reset. The applications that matter most are login-gated and stateful, so synthetic environments stand in for them. Recent pipelines generate such environments in bulk, which moves the bottleneck from how many exist to what is inside each one. The returns, we find, come from three properties: how much behavioural depth an environment carries, whether it targets the interaction an agent actually fails, and whether it improves alongside the model. We present Echoverse, which compiles specifications into stateful applications whose tasks are graded against the application's own database, and a co-evolution loop that reads every graded rollout twice: as repairs to the environment, its tasks and its verifier, and as training signal for the model. Trained on twelve such environments, a 9B model improves from 36.5% to 67.1% across fourteen evaluation splits, within fourteen points of the much larger frontier model that taught it. We examine each property in turn. On the same domains, shallow environments push live-site accuracy below the base model (80.0 to 75.0) while deep ones raise it (80.0 to 85.0 and 48.0 to 65.0); drilling one interface control across many renderings transfers to held-out widget families and to the open web; and repairing a single environment lifts the model trained on it from 16.2% to 38.5%. The same worlds serve as reinforcement-learning environments, where a reward combining the grounded verifier with a dense per-step judge raises held-out score from 58.8% to 68.0%. We release four environments as a benchmark, with their applications, seed data and grounded graders. Code: https://aka.ms/echoverse

What Makes Recurrence Effective in Looped Language Models?

Looped language models (LoopLMs) increase computational depth through parameter sharing, offering a path to scale inference computation without adding parameters. However, it remains unclear when additional recurrence is beneficial and how architectural choices affect its effectiveness. Through controlled experiments, we systematically examine (1) when recurrence helps, (2) where it should be applied, and (3) how its conditioning affects performance. Our evaluation covers inference budgets below, within, and beyond the training horizon under knowledge and reasoning tasks. (1) We find that recurrence can improve reasoning beyond the training horizon while degrading knowledge performance, but harder reasoning instances do not consistently benefit more. (2) Performance also depends on how distinct layers and recurrent iterations are allocated, showing that effective depth alone is insufficient to predict behavior. Non-recurrent output layers improve robustness to under-unrolling, while the preferred placement of input and output layers varies with inference budget. (3) Finally, we find that conventional initial-state injection offers limited robustness to varying recurrence depth. We therefore propose history-state injection as an alternative, and show that channel-wise history-state injection combined with timestep conditioning offers a low-cost and more effective design, better preserving knowledge under extended unrolling while improving robustness across inference budgets. Overall, our results clarify when recurrent computation helps, where it fails, and offer practical guidelines for designing LoopLMs across variable inference budgets.

Depth-Wise Probing and Pruning of the Planning Token in a Driving Vision-Language-Action Model

Vision-language-action (VLA) models route driving decisions through a deep language model, but it is unclear how much of that depth the action itself requires. We study a representative driving VLA whose entire plan is carried by a single planning token that a generative planner decodes into a trajectory. Borrowing the planner as a trajectory-space logit lens, we decode the planning token from every one of the 32 decoder layers and measure two signals: the linear decodability of the navigation command and trajectory compatibility with the frozen native planner. Our diagnostic shows that semantic intent is linearly decodable early: command-probe accuracy reaches 97.7\% after the first decoder layer, compared with 16.7\% chance. In contrast, compatibility with the frozen native planner improves gradually across depth, with open-loop Avg-L2 reaching its minimum of 2.11\,m only at the final layer. Learned readouts from the first layer recover much of this gap, indicating that planning information is already present early but is not yet represented in the format expected by the deployed planner. Ranking decoder layers by the angular deviation they induce in the planning token permits removal of 8 of 32 layers within an approximately 5\% relative open-loop error increase and yields a measured 1.33times decoder speedup. At the evaluated sample size, no family-specific degradation is statistically resolved. These findings are limited to the evaluated ORION checkpoint and Bench2Drive setup.

  • 6 authors
·
Aug 6

Scaling Towards the Information Boundary of Instruction Set: InfinityInstruct-Subject Technical Report

Instruction tuning has become a foundation for unlocking the capabilities of large-scale pretrained models and improving their performance on complex tasks. Thus, the construction of high-quality instruction datasets is crucial for enhancing model performance and generalizability. Although current instruction datasets have reached tens of millions of samples, models finetuned on them may still struggle with complex instruction following and tasks in rare domains. This is primarily due to limited expansion in both ``coverage'' (coverage of task types and knowledge areas) and ``depth'' (instruction complexity) of the instruction set. To address this issue, we propose a systematic instruction data construction framework, which integrates a hierarchical labeling system, an informative seed selection algorithm, an evolutionary data synthesis process, and a model deficiency diagnosis with targeted data generation. These components form an iterative closed-loop to continuously enhance the coverage and depth of instruction data. Based on this framework, we construct InfinityInstruct-Subject, a high-quality dataset containing ~1.5 million instructions. Experiments on multiple foundation models and benchmark tasks demonstrate its effectiveness in improving instruction-following capabilities. Further analyses suggest that InfinityInstruct-Subject shows enlarged coverage and depth compared to comparable synthesized instruction datasets. Our work lays a theoretical and practical foundation for the efficient, continuous evolution of instruction datasets, moving from data quantity expansion to qualitative improvement.

  • 4 authors
·
Jul 9, 2025

Terminal-Universe: Turning Agent Trajectories into Scalable Terminal Environments

As terminal-based code agents become prevalent, agent trajectories have accumulated at scale, while realistic, executable environments remain scarce. However, environments are what agent post-training actually requires: each can be re-queried into many verifiable tasks and provides execution feedback, whereas a trajectory is a single frozen demonstration. Rather than generating environments from scratch, we observe that the tool-execution history in existing trajectories exposes the structure and contents of the environments in which they ran, making it possible to reconstruct those environments from the trajectories themselves. Thus, we introduce Terminal-Universe, a framework which turns each trajectory into a reusable environment and explores it for synthesizing new tasks and continued interactions. Specifically, Terminal-Universe replays the file operations recorded in a trajectory to restore each file before the agent modified it, yielding a partial workspace; a completion agent then supplies the missing files and dependencies. On this recovered workspace, we both reconstruct the original intent task and synthesize entirely new ones. Besides, we also scale the tasks along two complementary axes: breadth and depth. For breadth, we mine directional dependency relations between related environments and synthesize cross-workspace queries spanning multiple codebases, as developers routinely do in real-world development. For depth, we extend the initial single-turn query into a multi-round session that captures iterative user feedback and requirement refinement via a user agent. Applied to public terminal agent trajectories, Terminal-Universe produces 37.3k task-sufficient environments. Supervised fine-tuning of Qwen3.5-27B on this corpus improves single-round performance on Terminal-Bench 2.1 by 11.9 points and multi-round performance on EvoCode-Bench v2 MT@4 by 13.8 points.

Qwen Qwen
·
Sep 2 1

Ask Early, Ask Late, Ask Right: When Does Clarification Timing Matter for Long-Horizon Agents?

Long-horizon AI agents execute complex workflows spanning hundreds of sequential actions, yet a single wrong assumption early on can cascade into irreversible errors. When instructions are incomplete, the agent must decide not only whether to ask for clarification but when, and no prior work measures how clarification value changes over the course of execution. We introduce a forced-injection framework that provides ground-truth clarifications at controlled points in the agent's trajectory across four information dimensions (goal, input, constraint, context), three agent benchmarks, and four frontier models (three per benchmark; one on a single benchmark only; 84 task variants; 6,000+ runs). Counter to the common intuition that "earlier is always better," we find that the value of clarification depends sharply on what information is missing: goal clarification loses nearly all value after 10% of execution (pass@3 drops from 0.78 to baseline), while input clarification retains value through roughly 50%. Deferring any clarification type past mid-trajectory degrades performance below never asking at all. Cross-model Kendall tau correlations (0.78-0.87 among models sharing identical task coverage; 0.34-0.67 across the full 4-model panel) confirm these timing profiles are substantially task-intrinsic. A complementary study of 300 unscripted sessions reveals that no current frontier model asks within the empirically optimal window, with strategies ranging from over-asking (52% of sessions) to never asking at all. These empirical demand curves provide the quantitative foundation that existing theoretical frameworks require but have lacked, and establish concrete design targets for timing-aware clarification policies. Code and data will be publicly released.

  • 5 authors
·
May 7

Sparse Growing Transformer: Training-Time Sparse Depth Allocation via Progressive Attention Looping

Existing approaches to increasing the effective depth of Transformers predominantly rely on parameter reuse, extending computation through recursive execution. Under this paradigm, the network structure remains static along the training timeline, and additional computational depth is uniformly assigned to entire blocks at the parameter level. This rigidity across training time and parameter space leads to substantial computational redundancy during training. In contrast, we argue that depth allocation during training should not be a static preset, but rather a progressively growing structural process. Our systematic analysis reveals a deep-to-shallow maturation trajectory across layers, where high-entropy attention heads play a crucial role in semantic integration. Motivated by this observation, we introduce the Sparse Growing Transformer (SGT). SGT is a training-time sparse depth allocation framework that progressively extends recurrence from deeper to shallower layers via targeted attention looping on informative heads. This mechanism induces structural sparsity by selectively increasing depth only for a small subset of parameters as training evolves. Extensive experiments across multiple parameter scales demonstrate that SGT consistently outperforms training-time static block-level looping baselines under comparable settings, while reducing the additional training FLOPs overhead from approximately 16--20% to only 1--3% relative to a standard Transformer backbone.

  • 12 authors
·
Apr 15

CCR-Bench: A Comprehensive Benchmark for Evaluating LLMs on Complex Constraints, Control Flows, and Real-World Cases

Enhancing the ability of large language models (LLMs) to follow complex instructions is critical for their deployment in real-world applications. However, existing evaluation methods often oversimplify instruction complexity as a mere additive combination of atomic constraints, failing to adequately capture the high-dimensional complexity arising from the intricate interplay of content and format, logical workflow control, and real-world applications. This leads to a significant gap between current evaluation practices and practical demands. To bridge this gap, we introduce CCR-Bench, a novel benchmark designed to assess LLMs' adherence to complex instructions. CCR-Bench is characterized by: (1) deep entanglement of content and formatting requirements in task specifications; (2) instructions that involve intricate task decomposition, conditional reasoning, and procedural planning; and (3) evaluation samples derived entirely from real-world industrial scenarios. Extensive experiments on CCR-Bench demonstrate that even state-of-the-art models exhibit substantial performance deficiencies, clearly quantifying the gap between current LLM capabilities and the demands of realworld instruction understanding. We believe that CCR-Bench offers a more rigorous and realistic evaluation framework, advancing the development of LLMs toward the next generation of models capable of understanding and executing complex tasks in industrial applications.

  • 12 authors
·
Mar 8

W&D:Scaling Parallel Tool Calling for Efficient Deep Research Agents

Deep research agents have emerged as powerful tools for automating complex intellectual tasks through multi-step reasoning and web-based information seeking. While recent efforts have successfully enhanced these agents by scaling depth through increasing the number of sequential thinking and tool calls, the potential of scaling width via parallel tool calling remains largely unexplored. In this work, we propose the Wide and Deep research agent, a framework designed to investigate the behavior and performance of agents when scaling not only depth but also width via parallel tool calling. Unlike existing approaches that rely on complex multi-agent orchestration to parallelize workloads, our method leverages intrinsic parallel tool calling to facilitate effective coordination within a single reasoning step. We demonstrate that scaling width significantly improves performance on deep research benchmarks while reducing the number of turns required to obtain correct answers. Furthermore, we analyze the factors driving these improvements through case studies and explore various tool call schedulers to optimize parallel tool calling strategy. Our findings suggest that optimizing the trade-off between width and depth is a critical pathway toward high-efficiency deep research agents. Notably, without context management or other tricks, we obtain 62.2% accuracy with GPT-5-Medium on BrowseComp, surpassing the original 54.9% reported by GPT-5-High.

  • 4 authors
·
Feb 6

Benchmarking Large Language Models on Controllable Generation under Diversified Instructions

While large language models (LLMs) have exhibited impressive instruction-following capabilities, it is still unclear whether and to what extent they can respond to explicit constraints that might be entailed in various instructions. As a significant aspect of LLM alignment, it is thus important to formulate such a specialized set of instructions as well as investigate the resulting behavior of LLMs. To address this vacancy, we propose a new benchmark CoDI-Eval to systematically and comprehensively evaluate LLMs' responses to instructions with various constraints. We construct a large collection of constraints-attributed instructions as a test suite focused on both generalization and coverage. Specifically, we advocate an instruction diversification process to synthesize diverse forms of constraint expression and also deliberate the candidate task taxonomy with even finer-grained sub-categories. Finally, we automate the entire evaluation process to facilitate further developments. Different from existing studies on controllable text generation, CoDI-Eval extends the scope to the prevalent instruction-following paradigm for the first time. We provide extensive evaluations of representative LLMs (e.g., ChatGPT, Vicuna) on CoDI-Eval, revealing their limitations in following instructions with specific constraints and there is still a significant gap between open-source and commercial closed-source LLMs. We believe this benchmark will facilitate research into improving the controllability of LLMs' responses to instructions. Our data and code are available at https://github.com/Xt-cyh/CoDI-Eval.

  • 5 authors
·
Jan 1, 2024 2

Probing Transformer Representations Layer by Layer, Module by Module

Which representation should be probed in a transformer-based foundation model? Recent work shows that the standard practice of probing the final layer is often suboptimal, as intermediate layers can provide better features. Yet, representations are still largely studied along depth alone, treating each transformer block as an atomic unit. In this work, we analyze transformer representations layer by layer, module by module. Through more than 144,000 linear probing evaluations of vision foundation models (VFMs) and large language models (LLMs), we show that layer and module choices should be considered jointly: the best layer-module pair yields substantially larger gains over the final-layer residual stream than the best layer with the residual stream fixed. Moreover, module performance can vary substantially across layers, showing that useful representations cannot be characterized by depth alone. Building on these findings, we evaluate simple fixed probing strategies: the final-layer feedforward activation (Act@100) for vision and the second normalization layer at 60% depth (LN2@60) for language. These strategies improve over the probing baseline in a majority of evaluations and recover, on average, 42% and 86% of the gains from probing the best layer-module pair for vision and language, respectively. For VFMs, these gains increase with the transfer difficulty between pretraining and downstream data.

  • 5 authors
·
Nov 7 4

DepthBench: Measuring How Residual Connections Enable More Computational Depth

Depth is a natural way to increase the computational capacity in Transformers, yet the contribution of deeper layers can diminish as depth grows larger. Recent approaches enhance normalization (e.g., LayerNorm Scaling) or residual connections (e.g., mHC, AttnRes) to enable better information flow and depth utilization. However, it remains unclear whether they truly translate increased architectural depth into effective computational depth, and whether their reported gains stem from better access to information across depth, or unaccounted-for confounding factors. In this paper, we introduce DepthBench, a controlled benchmark for studying computational depth across various architectures. We systematically vary the width--depth aspect ratio (d_{model}/n_{layer}) from shallow--wide to deep--narrow shapes, while keeping the model size and pre-training recipe fixed. Across 10 representative architectures, we find that the benefit of allocating more capacity to depth is strongly architecture-dependent. Standard Pre-LN and most of its norm- and scaling-based variants provide little benefit and can even degrade performance as models become deeper and narrower, whereas HC and Full AttnRes improve consistently even at extreme deep shapes. These gains extend beyond pre-training loss and consistently translate into improved domain-specific performance and effective computation. Controlled layer-level analyses further show that the gains of HC and Full AttnRes are associated with more effective utilization of additional layers, revealing distinct mechanisms of computational depth across architectures. Overall, our results identify residual connection design as a key determinant of whether depth can serve as a meaningful scaling axis by enabling additional architectural depth to translate into effective computation.

Coding Agents Are Guessing: Measuring Action-Boundary Violations in Underspecified DevOps Instructions

LLM coding agents are increasingly deployed to act autonomously on real production infrastructure. They execute shell commands, modify repositories, and call operational APIs. However, completing a task is not sufficient for safety. A wrong action can cause severe consequences. Existing agent benchmarks largely emphasize task completion, leaving open how agents behave under benign but underspecified instructions. We present UnderSpecBench, a benchmark for measuring action-boundary violations in coding agents (i.e., Claude Code, Codex, and OpenCode) on DevOps tasks. UnderSpecBench includes 69 task families grounded in documented incidents, CVEs, or tool behavior and organized across four DevOps capability domains and nine operational control surfaces. To isolate underspecification from task difficulty, each task keeps the same environment and ground-truth safe action while varying the instruction along three axes: intent clarity, target certainty, and blast radius. The resulting 2,208 prompt variants are evaluated with deterministic, side-effect-based oracles that separate Safe Success, Wrong Target, and OverScope outcomes; non-action runs are further classified as clarification, refusal, or deferment. Across five agent x model configurations using OpenCode, Claude Code, and Codex, the evaluation results show that underspecification does not mainly make agents fail; it makes them guess. 55.8-67.8% of runs violate at least one boundary. Target underspecification sharply degrades action quality, while blast-radius cues barely reduce action propensity. These findings show that completion-centric evaluation can overstate safe autonomy and motivate mitigations at the model, harness, and system layer.

  • 7 authors
·
Jul 1

Scaling Agentic Data for Long-Horizon Terminal Intelligence

Terminal agents are moving beyond local operations toward completing real-world professional tasks. Short trajectories can demonstrate commands and tool calls, but they do not fully show how agents accumulate evidence through exploration, use it to inform judgments, continually adjust strategies based on feedback, and turn intermediate results into final deliverables. High-quality long-horizon trajectories capture these agentic behavioral patterns and their connections within a single problem-solving process, providing richer experience for sustained autonomous work. However, environment synthesis may complete or simplify the key work underlying these patterns in advance and thus remove the need for exploration, implementation, and verification that the agent was meant to perform. To address this, we introduce TerminalHorizon, a fully automated data synthesis engine for long-horizon terminal agents. Starting from real-world professional work, it uses independent execution to identify key work omitted during construction and uses the resulting evidence to guide environment reconstruction. To extend these patterns across stages, it progressively expands tasks under the same goal, introducing new requirements that build on prior results and call for further exploration and improvement. Using this engine, we construct 1.5K task environments and perform supervised fine-tuning of Qwen3.5-27B on the resulting dataset to obtain TerminalHorizon-27B. We achieve substantial performance gains on all 12 benchmarks spanning coding-agent tasks, agentic tasks in real-world production settings, and general reasoning. Multiple RSI case studies, each with a 12-hour research budget, further demonstrate the model's ability to continue experimenting beyond an initial solution, improve its methods based on feedback, and retain effective improvements in its final deliverables.

alibabagroup alibaba
·
Oct 8 2

Stochastic KV Routing: Enabling Adaptive Depth-Wise Cache Sharing

Serving transformer language models with high throughput requires caching Key-Values (KVs) to avoid redundant computation during autoregressive generation. The memory footprint of KV caching is significant and heavily impacts serving costs. This work proposes to lessen these memory requirements. While recent work has largely addressed KV cache reduction via compression and eviction along the temporal axis, we argue that the depth dimension offers an orthogonal and robust avenue for optimization. Although prior research suggests that a full cache for every layer is redundant, implementing cross-layer cache sharing remains a practical challenge; existing methods typically suffer from reduced throughput or increased time-to-first-token. In this paper, we demonstrate that dropping a layer's cache offers efficient optimization without information loss. We propose a simple training approach: random cross-layer attention. During training, layers randomly choose to attend either to their own KV states or those of a preceding layer. This stochastic process adapts the model to be robust to various depth-wise cache sharing strategies, ensuring flexibility for unknown hardware constraints at deployment time. Our evaluations show that applying this scheme during pre-training or fine-tuning enables depth-wise cache sharing for various model families. Furthermore, for larger models in data-constrained settings, this approach is suggestive of a regularization-like effect, frequently preserving or improving performance while significantly reducing the cache's memory footprint.

apple Apple
·
Apr 2 1

LLM Self-Correction with DeCRIM: Decompose, Critique, and Refine for Enhanced Following of Instructions with Multiple Constraints

Instruction following is a key capability for LLMs. However, recent studies have shown that LLMs often struggle with instructions containing multiple constraints (e.g. a request to create a social media post "in a funny tone" with "no hashtag"). Despite this, most evaluations focus solely on synthetic data. To address this, we introduce RealInstruct, the first benchmark designed to evaluate LLMs' ability to follow real-world multi-constrained instructions by leveraging queries real users asked AI assistants. We also investigate model-based evaluation as a cost-effective alternative to human annotation for this task. Our findings reveal that even the proprietary GPT-4 model fails to meet at least one constraint on over 21% of instructions, highlighting the limitations of state-of-the-art models. To address the performance gap between open-source and proprietary models, we propose the Decompose, Critique and Refine (DeCRIM) self-correction pipeline, which enhances LLMs' ability to follow constraints. DeCRIM works by decomposing the original instruction into a list of constraints and using a Critic model to decide when and where the LLM's response needs refinement. Our results show that DeCRIM improves Mistral's performance by 7.3% on RealInstruct and 8.0% on IFEval even with weak feedback. Moreover, we demonstrate that with strong feedback, open-source LLMs with DeCRIM can outperform GPT-4 on both benchmarks.

amazon-agi Amazon AGI
·
Oct 8, 2024 2

Towards Execution-Grounded Automated AI Research

Automated AI research holds great potential to accelerate scientific discovery. However, current LLMs often generate plausible-looking but ineffective ideas. Execution grounding may help, but it is unclear whether automated execution is feasible and whether LLMs can learn from the execution feedback. To investigate these, we first build an automated executor to implement ideas and launch large-scale parallel GPU experiments to verify their effectiveness. We then convert two realistic research problems - LLM pre-training and post-training - into execution environments and demonstrate that our automated executor can implement a large fraction of the ideas sampled from frontier LLMs. We analyze two methods to learn from the execution feedback: evolutionary search and reinforcement learning. Execution-guided evolutionary search is sample-efficient: it finds a method that significantly outperforms the GRPO baseline (69.4% vs 48.0%) on post-training, and finds a pre-training recipe that outperforms the nanoGPT baseline (19.7 minutes vs 35.9 minutes) on pre-training, all within just ten search epochs. Frontier LLMs often generate meaningful algorithmic ideas during search, but they tend to saturate early and only occasionally exhibit scaling trends. Reinforcement learning from execution reward, on the other hand, suffers from mode collapse. It successfully improves the average reward of the ideator model but not the upper-bound, due to models converging on simple ideas. We thoroughly analyze the executed ideas and training dynamics to facilitate future efforts towards execution-grounded automated AI research.

  • 6 authors
·
Jan 20

Deep Learning-based Code Completion: On the Impact on Performance of Contextual Information

Code completion aims at speeding up code writing by recommending to developers the next tokens they are likely to type. Deep Learning (DL) models pushed the boundaries of code completion by redefining what these coding assistants can do: We moved from predicting few code tokens to automatically generating entire functions. One important factor impacting the performance of DL-based code completion techniques is the context provided as input. With "context" we refer to what the model knows about the code to complete. In a simple scenario, the DL model might be fed with a partially implemented function to complete. In this case, the context is represented by the incomplete function and, based on it, the model must generate a prediction. It is however possible to expand such a context to include additional information, like the whole source code file containing the function to complete, which could be useful to boost the prediction performance. In this work, we present an empirical study investigating how the performance of a DL-based code completion technique is affected by different contexts. We experiment with 8 types of contexts and their combinations. These contexts include: (i) coding contexts, featuring information extracted from the code base in which the code completion is invoked (e.g., code components structurally related to the one to "complete"); (ii) process context, with information aimed at depicting the current status of the project in which a code completion task is triggered (e.g., a textual representation of open issues relevant for the code to complete); and (iii) developer contexts, capturing information about the developer invoking the code completion (e.g., the APIs frequently used). Our results show that additional contextual information can benefit the performance of DL-based code completion, with relative improvements up to +22% in terms of correct predictions.

  • 3 authors
·
Jan 9, 2025

Excess Separability: Nuisance-Controlled Residual-Stream Probing for Benchmark Contamination Detection

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

  • 1 authors
·
Aug 15

Separating Constraint Compliance from Semantic Accuracy: A Novel Benchmark for Evaluating Instruction-Following Under Compression

Large language models (LLMs) exhibit degraded performance under prompt compression, but the mechanisms remain poorly understood. We introduce the Compression-Decay Comprehension Test (CDCT), a benchmark that independently measures constraint compliance (CC) and semantic accuracy (SA) across compression levels. We evaluate 9 frontier LLMs across 8 concepts using 5 compression levels from extreme (c=0.0, ~2 words) to none (c=1.0, ~135 words). A three-judge LLM jury achieves almost perfect inter-rater agreement on CC (Fleiss' appa=0.90). We observe a universal U-curve pattern in constraint compliance (97.2% prevalence), with violations peaking at medium compression (c=0.5, ~27 words). Counterintuitively, models perform better at extreme compression than medium lengths. The dimensions are statistically orthogonal (r=0.193, p=0.084), with constraint effects 2.9x larger than semantic effects. Experimental validation via RLHF ablation confirms our constraint salience hypothesis: removing "helpfulness" signals improves CC by 598% on average (71/72 trials, p<0.001), with 79% achieving perfect compliance. This demonstrates that RLHF-trained helpfulness behaviors are the dominant cause of constraint violations at medium compression. Reasoning models outperform efficient models by 27.5% (Cohen's d=0.96). Our findings reveal a fundamental tension between RLHF alignment and instruction-following, providing actionable guidelines for improving deployed systems.

  • 1 authors
·
Dec 2, 2025

SWE-Explore: Benchmarking How Coding Agents Explore Repositories

Repository-level coding benchmarks such as SWE-bench have driven a rapid surge in the capabilities of coding agents. Yet they usually treat coding tasks as a holistic, binary prediction problem (e.g., resolved or unresolved), neglecting fine-grained agent capabilities such as repository understanding, context retrieval, code localization, and bug diagnosis. In this paper, we introduce SWE-Explore, a benchmark that isolates the evaluation of repository exploration, a critical capability of coding agents. Given a repository and an issue, SWE-Explore asks an explorer to return a ranked list of relevant code regions under a fixed line budget. SWE-Explore covers 848 issues across 10 programming languages and 203 open-source repositories. For each instance, we derive line-level ground truth from independent agent trajectories that successfully solved the same issue, distilling the specific code regions their solution paths actually consulted. We evaluate exploration along coverage, ranking, and context-efficiency dimensions, showing that these metrics strongly track downstream repair behavior. Across a broad set of retrieval methods, general coding agents, and specialized localizers, we find that agentic explorers form a clear tier above classical retrieval. While file-level localization is already strong for modern methods, line-level coverage and efficient ranking remain the key axes differentiating state-of-the-art explorers.

QuartDepth: Post-Training Quantization for Real-Time Depth Estimation on the Edge

Monocular Depth Estimation (MDE) has emerged as a pivotal task in computer vision, supporting numerous real-world applications. However, deploying accurate depth estimation models on resource-limited edge devices, especially Application-Specific Integrated Circuits (ASICs), is challenging due to the high computational and memory demands. Recent advancements in foundational depth estimation deliver impressive results but further amplify the difficulty of deployment on ASICs. To address this, we propose QuartDepth which adopts post-training quantization to quantize MDE models with hardware accelerations for ASICs. Our approach involves quantizing both weights and activations to 4-bit precision, reducing the model size and computation cost. To mitigate the performance degradation, we introduce activation polishing and compensation algorithm applied before and after activation quantization, as well as a weight reconstruction method for minimizing errors in weight quantization. Furthermore, we design a flexible and programmable hardware accelerator by supporting kernel fusion and customized instruction programmability, enhancing throughput and efficiency. Experimental results demonstrate that our framework achieves competitive accuracy while enabling fast inference and higher energy efficiency on ASICs, bridging the gap between high-performance depth estimation and practical edge-device applicability. Code: https://github.com/shawnricecake/quart-depth

  • 12 authors
·
Mar 20, 2025 2

ExecRepoBench: Multi-level Executable Code Completion Evaluation

Code completion has become an essential tool for daily software development. Existing evaluation benchmarks often employ static methods that do not fully capture the dynamic nature of real-world coding environments and face significant challenges, including limited context length, reliance on superficial evaluation metrics, and potential overfitting to training datasets. In this work, we introduce a novel framework for enhancing code completion in software development through the creation of a repository-level benchmark ExecRepoBench and the instruction corpora Repo-Instruct, aim at improving the functionality of open-source large language models (LLMs) in real-world coding scenarios that involve complex interdependencies across multiple files. ExecRepoBench includes 1.2K samples from active Python repositories. Plus, we present a multi-level grammar-based completion methodology conditioned on the abstract syntax tree to mask code fragments at various logical units (e.g. statements, expressions, and functions). Then, we fine-tune the open-source LLM with 7B parameters on Repo-Instruct to produce a strong code completion baseline model Qwen2.5-Coder-Instruct-C based on the open-source model. Qwen2.5-Coder-Instruct-C is rigorously evaluated against existing benchmarks, including MultiPL-E and ExecRepoBench, which consistently outperforms prior baselines across all programming languages. The deployment of can be used as a high-performance, local service for programming development\url{https://execrepobench.github.io/}.

  • 12 authors
·
Dec 16, 2024

PolicyTrim: Boosting Intrinsic Policy Efficiency of Vision-Language-Action Models

Vision-Language-Action (VLA) models provide a unified paradigm for robotic manipulation, yet their real-world deployment is often bottlenecked by execution efficiency. While existing efforts predominantly focus on compute-centric efficiency to reduce per-step inference latency, the intrinsic policy efficiency of these models remains largely unexplored. Policy efficiency is fundamentally affected by two factors, namely the effective executable length of predicted action chunks and the total physical steps required to complete a task. These two factors jointly determine the total number of forward inference calls during execution. We observe that current VLA policies struggle with planning unreliability and action redundancy, suffering from severe prediction degradation at the tail of action chunks and tending to generate unnecessarily redundant physical steps. To address this, we propose PolicyTrim, a reinforcement learning-based post-training framework that extends the reliable action chunk length and reduces redundant physical steps. For reliable chunk extension, we employ a dynamic exploration strategy that explicitly rewards the successful completion of longer executable lengths, progressively pushing the trustworthy prediction horizon to its empirical limit. For step efficiency, we design a redundancy-aware reward that directly favors successful task completions with fewer steps while penalizing unreproducible shortcuts, effectively eliminating redundant physical actions. Extensive experiments across three benchmarks and three VLA models demonstrate that PolicyTrim improves action chunk utilization by 3times and reduces physical execution steps by 51.4\%. Ultimately, our framework delivers up to a 5.83times end-to-end deployment speedup without compromising task success rates.

Write, Execute, Refine: From Skill Followers to Skill Optimizers via Reinforcement Learning from Execution Feedback

Expert-written natural language skills can improve tool-using agents, yet agent-authored skills perform 8-11 points worse than using no skill. This gap suggests that following procedural guidance and improving it from execution evidence are distinct capabilities. Inference time loops can repair skills but do not improve the model that writes the next one. We study how to organize execution experience from intermediate skills into training states for an optimizer. We introduce WER (Write, Execute, and Refine), a multi-phase framework that trains a Skill Optimizer outside a frozen executor. The optimizer proposes skills, a frozen agent executes each repeatedly, and a programmatic verifier scores the outcomes. The scores provide relative credit and select mixed-outcome records. Matched successful and failed trajectories from these records form the next phase's refinement states, so the optimizer learns from the consequences of its earlier outputs. On BFCL v4 multi-turn and tau2-bench, WER improves average Pass@1 over the no-skill baseline by 7.80 and 3.85 points, respectively. Under an identical refinement workflow, it outperforms the same backbone without optimizer training by 9.35 and 10.29 points. The trained 4B optimizer reaches 76.63 percent on BFCL v4, outperforming all evaluated off-the-shelf general-purpose models used as skill optimizers on average.

  • 10 authors
·
Aug 18

Depth-Attention: Cross-Layer Value Mixing for Language Models

Self-attention selects information freely across the sequence, but across depth, Transformers merely add each layer's output to the residual stream, so later layers cannot selectively reuse earlier-layer representations. Recent cross-layer methods improve this flow but operate on hidden states outside attention, adding state beyond the key-value cache at inference--a cost that becomes increasingly salient as modern LLMs compress the cache with grouped-query and multi-head latent attention. We introduce Depth-Attention, which performs this selection inside the attention module itself: before a layer attends over the sequence, its query attends over the keys of earlier layers at the same token position and mixes their values into the value that self-attention then reads. Because Depth-Attention reuses the standard attention queries, keys, and value-cache slots, storing depth-mixed values in place of the original values, it adds no parameters and introduces no persistent inference state beyond the standard key-value cache--the same cache size as a vanilla decoder and less than hidden-state-based cross-layer methods. On Qwen3-style decoders at 1.5B and 3B parameters, Depth-Attention attains the lowest perplexity and the highest average downstream accuracy, improving over the vanilla Transformer by up to 2.3 accuracy points and surpassing strong cross-layer baselines in perplexity and average accuracy, while adding under 0.01% extra arithmetic FLOPs and no additional persistent inference state. The gains hold from 360M to 3B parameters and extend to looped Transformers.

  • 10 authors
·
Jun 2

ScopeIF: Improving Scope-Aware Precise Instruction-Following in Large Language Models via Graded Reward Modeling

Precise instruction-following is a fundamental ability of large language models (LLMs), requiring their outputs to strictly satisfy objective constraints in input instructions. In complex application scenarios, these constraints often possess diverse scopes that govern specific response segments rather than the entire output. However, existing optimization methods often neglect constraint scope during data construction and rely on binary per-constraint rewards, yielding limited data diversity and sparse supervision for complex constraints. To this end, we propose ScopeIF, a novel training framework for scope-aware precise instruction-following. We first introduce a unified schema that factorizes objective constraints into three decoupled dimensions: Scope, Target, and Range. Grounded in this schema, we construct ScopeInstruct, a large-scale instruction dataset with diverse scope-aware constraints, and combine tool-grounded verification with graded reward modeling to quantify the violation degree of each constraint, providing dense supervision for policy optimization. Extensive experiments demonstrate that ScopeIF consistently outperforms existing methods, particularly on complex scope-aware constraints, while preserving general capabilities. Notably, it enables optimized Qwen3-4B and 8B models to rival or surpass strong frontier models such as Gemini-2.5-Pro and DeepSeek-V3.2, establishing an effective paradigm for advancing scope-aware instruction-following. Our code and data are available at https://github.com/thu-coai/ScopeIF.

  • 6 authors
·
Sep 25

Gathered, Not Admitted: How Attention Brings a Latent Variable into Verbalizable Form

Language models hold latent quantities in a form they can report on, and more of a quantity is present in that form when the task requires reusing it flexibly. What causes a representation to enter that form is open, and the word workspace invites an admission story: a gate that decides what gets in. Testing it on open-weight models with Jacobian lenses, over a benchmark whose five arms share an identical context, we find no gate where it predicts one. Demand raises a concept's lens visibility beyond what applying an operator to a supplied value produces: +0.050 [+0.045, +0.057] in percentile rank on our primary checkpoint, positive on all four we measure, though that arm answers at ceiling and the accuracymatched contrast is stronger under that readout. At the same time one shared linear map decodes the variable from every arm, the control included, at 6.4-9.0x its selection-corrected floor. What produces the later readable form at the queried position is attention-mediated gathering inside a mid-depth window: separating patch depth from readout depth puts transport there at least 17x above anywhere shallower under non-saturating readouts, with no tested MLP output contributing positively inside it. Under the saturating percentile rank the same grid does not localise the window, which is a fact about that measure. An arm that needs the variable for nothing concentrates sevenfold less, so the window is demand-specific. That window has two measured edges, a survival failure below and destruction above, and it falls at the same fractional depth in a 64-layer hybrid and a 62-layer dense model from another family. We localise where the variable is installed and read, not the route from the passage, which transports nothing. But the readout is not a calibrated measure of use: three components move it to within 12% of one another and differ 7.4x in what they do to the answer.

SDOF: Taming the Alignment Tax in Multi-Agent Orchestration with State-Constrained Dispatch

Multi-agent orchestration frameworks such as LangChain, LangGraph, and CrewAI route tasks through graph-based pipelines but do not enforce the stage constraints that govern real business processes. We present SDOF, a framework that treats multi-agent execution as a constrained state machine. SDOF operates through two primary defensive layers, implemented by three components: (1) an Online-RLHF Specialized Intent Router trained via Generative Reward Modeling (GRPO) and (2) a StateAwareDispatcher with GoalStage finite-automaton checks and precondition/postcondition SkillRegistry validation for auditable execution control. On a recruitment system backed by the Beisen iTalent platform (6000+ enterprises), 185 expert-curated scenarios trigger 1671 live API calls. Our GSPO-aligned 7B Intent Router achieves higher joint accuracy than zero-shot GPT-4o on this FSM-constrained adversarial routing benchmark (80.9% versus 48.9%). In end-to-end execution, SDOF reaches 86.5% task completion (95% confidence interval 80.8 to 90.7) and blocks all 22 operations in the injection, illegal HR subset. Under a broader message-level blocking audit, SDOF attains precision 100% and recall 88%, expert agreement kappa=0.94. A separate evaluation on 960 SGD-derived dialogues spanning 8 service domains surfaces 201 stage-order conflicts under our FSM mapping, 41 of which arise in the normal split. This arXiv version reports the current validated scope; extended multi-seed training comparisons and deeper workflow evaluations will be released in a subsequent update.

  • 1 authors
·
Apr 19

A Multi-Dimensional Constraint Framework for Evaluating and Improving Instruction Following in Large Language Models

Instruction following evaluates large language models (LLMs) on their ability to generate outputs that adhere to user-defined constraints. However, existing benchmarks often rely on templated constraint prompts, which lack the diversity of real-world usage and limit fine-grained performance assessment. To fill this gap, we propose a multi-dimensional constraint framework encompassing three constraint patterns, four constraint categories, and four difficulty levels. Building on this framework, we develop an automated instruction generation pipeline that performs constraint expansion, conflict detection, and instruction rewriting, yielding 1,200 code-verifiable instruction-following test samples. We evaluate 19 LLMs across seven model families and uncover substantial variation in performance across constraint forms. For instance, average performance drops from 77.67% at Level I to 32.96% at Level IV. Furthermore, we demonstrate the utility of our approach by using it to generate data for reinforcement learning, achieving substantial gains in instruction following without degrading general performance. In-depth analysis indicates that these gains stem primarily from modifications in the model's attention modules parameters, which enhance constraint recognition and adherence. Code and data are available in https://github.com/Junjie-Ye/MulDimIF.

  • 15 authors
·
May 12, 2025 2

SynthCoder: A Synthetical Strategy to Tune LLMs for Code Completion

Code completion is a prominent application of Large Language Models (LLMs) in software engineering. Due to the near real-time response requirements of this task, base models with small to medium-sized parameters are typically employed, supplemented by various optimization and post-training techniques. However, these optimization methods often have trade-offs, leading to a seesaw effect where performance improvements on certain datasets or metrics are accompanied by degradations on others -- sometimes even falling below the baseline model's performance. This paper proposes SynthCoder, a model that integrates leading industry practices to achieve state-of-the-art performance on the Fill-in-the-Middle (FIM) code completion task. In specific, we first construct a diverse dataset by combining Abstract Syntax Tree (AST) node extraction with heuristics that simulate developer behavior. Then we enrich our training corpus with cross-file contextual information using the BM25 algorithm and call graphs, enhancing the model's ability to perform code completion in both file-level and repository-level scenarios. As the last step, we employ a two-stage training process using the Seed-Coder-8B-Base as the base model. First, we fine-tune the model using Curriculum Learning technology. Following this, we perform alignment using Direct Preference Optimization (DPO) with preference pairs generated through Rejection Sampling. Experimental results demonstrate that our final model excels on mainstream repository-level code completion benchmarks, including aiXcoder, ExecRepoBench, CrossCodeEval, and CoLT. Furthermore, our carefully curated training set effectively mitigates the model's tendency to just repeat existing code, a common issue existing in various code completion models.

  • 9 authors
·
Aug 21, 2025

StepCodeReasoner: Aligning Code Reasoning with Stepwise Execution Traces via Reinforcement Learning

Existing code reasoning methods primarily supervise final code outputs, ignoring intermediate states, often leading to reward hacking where correct answers are obtained through inconsistent reasoning. We propose StepCodeReasoner, a framework that introduces explicit intermediate execution-state supervision. By automatically inserting structured print-based execution-trace anchors into code, the model is trained to predict runtime states at each step, transforming code reasoning into a verifiable, stepwise execution modeling problem. Building on this execution-aware method, we introduce Bi-Level GRPO, a reinforcement learning algorithm for structured credit assignment at two levels: inter-trajectory, comparing alternative execution paths, and intra-trajectory, rewarding intermediate accuracy based on its impact on downstream correctness. Extensive experiments demonstrate that StepCodeReasoner achieves SOTA performance in code reasoning. In particular, our 7B model achieves 91.1\% on CRUXEval and 86.5\% on LiveCodeBench, outperforming the CodeReasoner-7B baseline (86.0\% and 77.7\%) and GPT-4o (85.6\% and 75.1\%). Furthermore, on the execution-trace benchmark REval, our model scores 82.9\%, outperforming baseline CodeReasoner-7B (72.3\%), its 14B counterpart (81.1\%), and GPT-4o (77.3\%). Additionally, our approach also improves code generation performance, demonstrating that explicit execution modeling enhances both code reasoning and code generation.

  • 4 authors
·
May 11

When Models Can't Follow: Testing Instruction Adherence Across 256 LLMs

Despite widespread deployment of Large Language Models, systematic evaluation of instruction-following capabilities remains challenging. While comprehensive benchmarks exist, focused assessments that quickly diagnose specific instruction adherence patterns are valuable. As newer models may be trained on existing benchmarks, novel evaluation approaches are needed to assess genuine capabilities rather than memorized performance. This paper presents a streamlined evaluation framework using twenty carefully designed prompts to assess LLM instruction-following across diverse task categories. We demonstrate this framework through a large-scale empirical study conducted on October 14, 2025, testing 256 verified working models from 331 available via OpenRouter. To ensure methodological rigor and prevent selection bias, we first verified each model's basic functionality before inclusion. Unlike large-scale benchmarks requiring extensive computational resources, our approach offers a practical diagnostic tool researchers and practitioners can readily apply. Our methodology builds upon verifiable instructions while introducing a compact test suite balancing comprehensiveness with efficiency. Each prompt targets distinct aspects of instruction following, including format compliance, content constraints, logical sequencing, and multi-step task execution. We evaluate models from major providers (OpenAI, Anthropic, Google, Meta, Mistral) and emerging implementations (Qwen, DeepSeek, community models), providing comparative performance analysis. Our findings reveal consistent failure modes and identify specific instruction types posing particular challenges. This work contributes both a practical evaluation tool and one of the most comprehensive empirical analyses of instruction-following capabilities across the contemporary LLM landscape.

  • 3 authors
·
Oct 18, 2025

Paritok-4B: Intent-Conditioned Context Compression for Coding Agents

Coding agents re-send large file reads and tool outputs to a frontier LLM every turn, and this context dominates their token bill. General-purpose prompt compressors are trained on prose and suit code poorly: they paraphrase identifiers and drop the exact spans an agent needs to edit. We present Paritok-4B, a 4B LoRA compressor for coding-agent trajectories built on two commitments. It is extractive: it selects spans rather than rewriting them, and 96.0% of the identifiers, paths, and numbers it emits already appear in its input, holding at 96.2% on held-out SWE-bench Lite output. It is intent-conditioned: told the agent's current task, it acts chiefly inside a retained segment, selecting which lines survive (retained lines are +0.067 more intent-relevant than removed ones, paired 95% CI [+0.056, +0.078]) rather than changing how much is retained. We distil a gpt-4.1-mini teacher over 67,074 real OpenHands trajectories into 40,606 validated examples and fine-tune Qwen3-4B. On all 300 SWE-bench Lite instances, Paritok-4B compresses agent context to 25.7% of its size, 2.0x harder than a gpt-4.1-mini compressor (50.2%) and 2.4x harder than gpt-5 (61.9%), while retaining 86.5% of uncompressed single-shot solve quality. Fed the cat -n line-numbered input real agents produce, it compresses slightly less (27.8%) and retains more (89.3%); there the paired test is informative, with 30 instances solved only uncompressed and 17 only compressed, an exact McNemar p=0.079, so at this sample size compressing context to roughly a quarter of its size does not significantly reduce the solve rate. The model is a 264 MB adapter that self-hosts on one 24 GB GPU with no per-token compressor fee, which at list prices decides the economics: gpt-5 as a compressor is net-negative, costing more than the downstream tokens it saves. Weights, data, and evaluation scripts are open (Apache 2.0).

  • 2 authors
·
Aug 24

PASS-VLN: Passability-Aware Local-Command Vision-and-Language Navigation

Reliable vision-and-language navigation (VLN) requires not only understanding instructions but also determining whether and how a robot can physically execute them. However, existing VLN benchmarks typically assume executable instructions and focus on long-horizon tasks. This leaves body-dependent local execution, including passability and collision-free execution, largely unexamined. Evaluating these factors within long-horizon tasks would entangle local physical execution with task planning and long-term spatial memory, making navigation failures difficult to attribute. We therefore focus on grounding local navigation commands in executable motion under environmental and robot body constraints. We present PASS-VLN, a passability-aware local-command VLN benchmark and model. The benchmark holds the scene, instruction, start pose, and reference route fixed while varying robot body width, requiring target completion when the instructed passage is feasible and stopping before blockage otherwise. Our model encodes body width through obstacle inflation in a depth-derived local bird's-eye view, fuses geometry with visual and linguistic context, and predicts discrete latent action codes for continuous closed-loop execution. Experiments show that PASS-VLN improves collision-free success by approximately 12 percentage points over a strong VLN model fine-tuned on our benchmark, while adapting reach-versus-stop behavior to body constraints and generalizing to unseen body widths. When integrated with a high-level planner, PASS-VLN achieves higher success with fewer local commands, while real-world deployment further demonstrates its effectiveness as a low-level executor. The benchmark and model will be released.

  • 7 authors
·
Oct 15

Evaluating and Achieving Controllable Code Completion in Code LLM

Code completion has become a central task, gaining significant attention with the rise of large language model (LLM)-based tools in software engineering. Although recent advances have greatly improved LLMs' code completion abilities, evaluation methods have not advanced equally. Most current benchmarks focus solely on functional correctness of code completions based on given context, overlooking models' ability to follow user instructions during completion-a common scenario in LLM-assisted programming. To address this limitation, we present the first instruction-guided code completion benchmark, Controllable Code Completion Benchmark (C3-Bench), comprising 2,195 carefully designed completion tasks. Through comprehensive evaluation of over 40 mainstream LLMs across C3-Bench and conventional benchmarks, we reveal substantial gaps in instruction-following capabilities between open-source and advanced proprietary models during code completion tasks. Moreover, we develop a straightforward data synthesis pipeline that leverages Qwen2.5-Coder to generate high-quality instruction-completion pairs for supervised fine-tuning (SFT). The resulting model, Qwen2.5-Coder-C3, achieves state-of-the-art performance on C3-Bench. Our findings provide valuable insights for enhancing LLMs' code completion and instruction-following capabilities, establishing new directions for future research in code LLMs. To facilitate reproducibility and foster further research in code LLMs, we open-source all code, datasets, and models.

  • 10 authors
·
Jan 22

Teaching Agents to Code Reliably

Autonomous coding agents solve repository issues by reading code, running commands, editing files, and submitting patches. Extra inference-time compute yields gains only when it produces a useful repair and supplies reliable evidence for choosing one. Three behaviors decide both, and we argue they are teachable rather than byproducts of scale, so a policy can carry them instead of a scaffold. Location diversity remains narrow, since attempts return to the same site and extra samples add no coverage. Edit diversity is left unexploited, since methodologies that differ resolve complementary issues no single run reaches. Verification misleads, since a test the agent writes for its own patch accepts many incorrect ones. Directing search by execution feedback and scoring each patch against its own reverted tree resolves 52.8% of SWE-bench Verified using 48.1% of the agent-steps an eight-sample baseline spends. Training moves these behaviors into the policy. On the 270 issues held out from SFT and RL training, weighted supervised fine-tuning raises pass@1 from 31.9% to 35.2% and pass@8 from 46.7% to 51.1%. A reinforcement objective then trains the verifier against gold-labeled repairs and incorrect variants, crediting the assertions that detect them. It raises pass@1 to 43.0% and pass@8 to 60.7%, lifts verifier precision from 26.8% to 41.7%, and more than halves false acceptance. Resolution improves on two of three out-of-distribution suites and verifier precision on all three, and the gains hold at 7B, 14B, and 30B against published coder baselines.

  • 6 authors
·
Oct 1

ClawProBench: Trace-Aware Evaluation of AI Agents with Runtime Coverage and Frozen Workplace-Style Holdouts

Agent benchmarks often evaluate only final answers even when agents run on stateful runtimes. We argue this under-specifies what is being evaluated: the proper unit is a declared model-plus-runtime configuration whose failures can occur in evidence acquisition, runtime routing, safety boundaries, or repeated execution. We present ClawProBench, a trace-aware benchmark for runtime-native agent evaluation instantiated on OpenClaw, a live agent runtime with workspace tools and native surfaces for browsing, memory, messaging, scheduling, skills, and subagents. ClawProBench defines two tracks: a 102-scenario full profile with live workspace and native-runtime routing tasks, and a frozen 68-scenario holdout with closed-world JSON output contracts for robust ranking. Trials are scored from execution traces via a safety-gated formula combining correctness, process quality, and efficiency, preserving failure evidence for audit. Our anonymous artifact includes benchmark definitions, scoring code, manifests and sanitized traces. We evaluate 68 configurations on the full profile and 37 on holdout. The top safety-gated average trace score is 0.7671. Native-runtime tasks underperform workspace-live tasks (0.5238 vs. 0.6415). On holdout, pass@k-any outperforms strict three-trial pass (0.6638 vs. 0.2890), while full-profile and holdout rankings show weak alignment (Spearman 0.1300). Rankings based purely on correctness differ substantially from process-aware, safety-gated and strict-pass views. Final-answer leaderboards may hide native-surface weaknesses, one-off successes and trace-local agent failure modes.

  • 1 authors
·
Aug 22 3

Ko-WideSearch: A Korean Breadth-Search Benchmark for Exhaustive Set Enumeration by Web Agents

Web-agent benchmarks overwhelmingly measure depth -- pinning one obscure answer behind a chain of constraints -- while breadth, exhaustively enumerating a closed set and filling each item's attributes, is barely evaluated, especially outside English. Breadth is also hard to build: certifying that a gold set is complete and every cell correct is far costlier than checking a single answer. I introduce Ko-WideSearch, a Korean breadth-search benchmark built by an automated synthesize-and-verify pipeline. Each task names a set-parent entity -- a TV season, a dynasty, a league, an administrative region, an election -- and asks for its full membership plus a per-item attribute table, graded by Item-, Column-, and Row-F1. It spans 228 tables over 190 entities and sixteen categories across three difficulty tiers, set by two structural knobs I dial independently -- table width and a 2-D composite key -- so cross-product membership climbs from 0\% to 100\% across the tiers. A single normalization-aware comparator is shared between gold construction and grading, so stable date and count columns are not over-dropped on formatting alone. Across twenty web agents, the failure is consistent: agents recover the set but not the rows (e.g.\ Item-F1 92.8 against Row-F1 53.7), accuracy falls steadily as the knobs harden, and neither more search nor more spend closes the gap. Broken down by cell, the hard part is finding the right value, not formatting it: open-ended free-text cells fail most, while cells with a standard answer such as a date or a name usually come out right.

  • 1 authors
·
Jun 24 2

When Does Sparsity Mitigate the Curse of Depth in LLMs

Recent work has demonstrated the curse of depth in large language models (LLMs), where later layers contribute less to learning and representation than earlier layers. Such under-utilization is linked to the accumulated growth of variance in Pre-Layer Normalization, which can push deep blocks toward near-identity behavior. In this paper, we demonstrate that, sparsity, beyond enabling efficiency, acts as a regulator of variance propagation and thereby improves depth utilization. Our investigation covers two sources of sparsity: (i) implicit sparsity, which emerges from training and data conditions, including weight sparsity induced by weight decay and attention sparsity induced by long context inputs; and (ii) explicit sparsity, which is enforced by architectural design, including key/value-sharing sparsity in Grouped-Query Attention and expert-activation sparsity in Mixtureof-Experts. Our claim is thoroughly supported by controlled depth-scaling experiments and targeted layer effectiveness interventions. Across settings, we observe a consistent relationship: sparsity improves layer utilization by reducing output variance and promoting functional differentiation. We eventually distill our findings into a practical rule-of-thumb recipe for training deptheffective LLMs, yielding a notable 4.6% accuracy improvement on downstream tasks. Our results reveal sparsity, arising naturally from standard design choices, as a key yet previously overlooked mechanism for effective depth scaling in LLMs. Code is available at https://github.com/pUmpKin-Co/SparsityAndCoD.

DEPTHOR: Depth Enhancement from a Practical Light-Weight dToF Sensor and RGB Image

Depth enhancement, which uses RGB images as guidance to convert raw signals from dToF into high-precision, dense depth maps, is a critical task in computer vision. Although existing super-resolution-based methods show promising results on public datasets, they often rely on idealized assumptions like accurate region correspondences and reliable dToF inputs, overlooking calibration errors that cause misalignment and anomaly signals inherent to dToF imaging, limiting real-world applicability. To address these challenges, we propose a novel completion-based method, named DEPTHOR, featuring advances in both the training strategy and model architecture. First, we propose a method to simulate real-world dToF data from the accurate ground truth in synthetic datasets to enable noise-robust training. Second, we design a novel network that incorporates monocular depth estimation (MDE), leveraging global depth relationships and contextual information to improve prediction in challenging regions. On the ZJU-L5 dataset, our training strategy significantly enhances depth completion models, achieving results comparable to depth super-resolution methods, while our model achieves state-of-the-art results, improving Rel and RMSE by 27% and 18%, respectively. On a more challenging set of dToF samples we collected, our method outperforms SOTA methods on preliminary stereo-based GT, improving Rel and RMSE by 23% and 22%, respectively. Our Code is available at https://github.com/ShadowBbBb/Depthor

  • 7 authors
·
Apr 2, 2025

Is Pre-training Applicable to the Decoder for Dense Prediction?

Pre-trained encoders are widely employed in dense prediction tasks for their capability to effectively extract visual features from images. The decoder subsequently processes these features to generate pixel-level predictions. However, due to structural differences and variations in input data, only encoders benefit from pre-learned representations from vision benchmarks such as image classification and self-supervised learning, while decoders are typically trained from scratch. In this paper, we introduce timesNet, which facilitates a "pre-trained encoder times pre-trained decoder" collaboration through three innovative designs. timesNet enables the direct utilization of pre-trained models within the decoder, integrating pre-learned representations into the decoding process to enhance performance in dense prediction tasks. By simply coupling the pre-trained encoder and pre-trained decoder, timesNet distinguishes itself as a highly promising approach. Remarkably, it achieves this without relying on decoding-specific structures or task-specific algorithms. Despite its streamlined design, timesNet outperforms advanced methods in tasks such as monocular depth estimation and semantic segmentation, achieving state-of-the-art performance particularly in monocular depth estimation. and semantic segmentation, achieving state-of-the-art results, especially in monocular depth estimation. embedding algorithms. Despite its streamlined design, timesNet outperforms advanced methods in tasks such as monocular depth estimation and semantic segmentation, achieving state-of-the-art performance particularly in monocular depth estimation.

  • 4 authors
·
Mar 5, 2025

Depth Memory

Residual connections propagate information through a network by additively accumulating layer outputs. Recently proposed alternatives, such as Manifold-Constrained Hyper-Connections (mHC) and Attention Residuals (AttnRes), instead use more expressive depth aggregation mechanisms that improve language modeling performance at scale. In this work, we consider the mixing of representations over depth as a problem of storing and retrieving information across layers. Formalizing this perspective, we introduce Depth Memory (DM), a unified framework that describes the standard pre-layer-norm (PreLN) transformer, mHC, and AttnRes in terms of streams that carry representations through the network. One such stream, for example, could be an explicit memory stream that is queried to enrich the input to every layer, and whose output is subsequently written back into the memory for use by later layers. For AttnRes, this memory stream is a growing cache of explicit layer representations. For mHC, it is an expanded residual stream. Building on this view, we propose Linear Depth Memory (LDM), which formulates information retrieval across depth as a regression problem solved using recursive least squares. The resulting architecture propagates three streams across depth: the standard residual stream, a linear associative memory stream, and an inverse covariance stream. For high-throughput training and inference, we propose a hardware-aware implementation of LDM that reduces peak activation memory and memory traffic. LDM consistently achieves the lowest perplexities among PreLN, mHC and AttnRes baselines at the 400M and 1.5B parameter scales, alongside competitive zero-shot accuracy.

  • 4 authors
·
Oct 12

NovaFabric: Tamper-Evident, Replayable Evidence for Autonomous AI Agent Runs

When an autonomous AI agent does something consequential, what can be proven about what it did? Agent-observability platforms capture traces, but a trace is mutable: alterable undetected, with no recipe for re-executing it, silent on whether captured secrets were removed. Regulation (EU AI Act, ISO 42001, NIST AI RMF) presumes records an independent party can check. We present NovaFabric, producing audit-grade execution evidence: provider-neutral, tamper-evident, replayable, shareable. It records an agent run, without modifying agent logic, into a portable Run Capsule (fifteen-entity schema), sealed with a holistic DSSE signature, RFC 3161 timestamp, Merkle log and redaction attestation. Sealed runs are re-executable under a four-mode replay protocol and exportable as an Evidence Bundle for third-party verification with stock tooling (specified, not evaluated). The contribution is integration, not new cryptography: OpenTelemetry, DSSE/in-toto and W3C PROV. We evaluate eight research questions at measured scope. Mocked replay serves every model response from the capsule (no live model call, 10/10) but is offline w.r.t. models, not the network; only 2/10 tool-using workloads completed; the gap is missing tool-response substitution. Tampering is rejected across three tested classes. Declared-stream completeness is 0.652 (95% CI +/-0.064, ten scenarios). A repaired rule pack redacts 14/14 credential types, preserving 9/9 decoys; diff localises 140/140 mutations. Blast-radius queries: 45.5ms p99 over 10M edges (3.3x faster than a columnar baseline), 167.9ms over 100M (1 client, n=30). A 314-machine, ten-region run finds capsule REST ingest lossless but capped at 61.6 req/s (p99 26.8s) by per-worker serialisation. Six defects found in NovaFabric and its evaluation corpus: four fixed, one withdrawn, one open. Verification is conditional on a stated trusted computing base.

  • 1 authors
·
Sep 10