new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 19

CurvDelta: Low-Curvature Delta Modeling For Surgical Learning and Unlearning

A central challenge in adapting large language models (LLMs) is capability preservation: an adaptation can achieve its target while degrading general capabilities. We introduce CurvDelta, a scalable framework that incorporates the preservation constraint into the parameterization of the model update. By analyzing the local geometry of the preservation constraint around the pre-adaptation model, CurvDelta constructs a low-curvature space in which parameter updates leave the preservation loss nearly invariant. We make its construction practical for LLMs through Kronecker-factored approximate curvature (K-FAC) and a factorized projection. We also introduce CurvLoRA, a low-rank variant within the same preservation geometry, designed for more efficient adaptation. Both methods apply to preservation-constrained adaptation tasks such as capability learning and selective unlearning. We evaluate our methods on mathematical reasoning, code generation, and knowledge unlearning. For mathematical reasoning and code generation, our approaches achieve competitive downstream performance while better preserving general capabilities, offering a favorable acquisition--retention trade-off relative to the baselines. For knowledge unlearning, our main results on TOFU and MUSE show a better balance between targeted forgetting and knowledge retention than the baselines, with retention performance close to the from-scratch retraining reference.

  • 6 authors
·
Nov 17 1

FACET: Factorized Asymmetric Conditioning for Efficient Transport in High-Fidelity Fluorescence Microscopy Synthesis

Fluorescence microscopy reveals where proteins localize, but only a limited number of proteins can be imaged in the same cell; generating these images from amino-acid sequence and the cell's morphological context enables in silico localization of unimaged proteins. The two conditions, however, play asymmetric roles: morphological context is spatially aligned with the target, whereas sequence is non-spatial and must specify protein-dependent localization within it, with recurring coarse patterns shared across proteins and finer protein-specific variation. Existing generators condition on both jointly, without separating what each explains. We introduce FACET (Factorized Asymmetric Conditioning for Efficient Transport), a probabilistic generative framework that encodes this structure as an explicit inductive bias: sequence semantics are learned from what context leaves unexplained, coarse localization regularities are shared across proteins through a semantic memory, and protein-specific variation is a bounded residual around them. A variance-preserving state projection further lets FACET perform continuous stochastic transport through a pretrained diffusion predictor with minimal parameter overhead. On held-out proteins, FACET improves spatial overlap by 34.3% on the Human Protein Atlas and 14.0% on OpenCell over a backbone-matched baseline, and reduces FID by 27.2% and 46.5%, respectively, with 75% fewer network evaluations. It also substantially improves protein-association structure recovery and yields better-calibrated predictions, while detailed ablations show complementary contributions from its design choices. These results identify factorized asymmetric conditioning, rather than generator capacity alone, as a key lever for high-fidelity, efficient, and biologically meaningful cellular image synthesis.

  • 3 authors
·
Oct 3

Unfold The World: Factorize 4D Properties in Reinforcing Spatial Reasoning

Despite the remarkable prowess of Vision-Language Models (VLMs) in general multimodal tasks, they remain fundamentally ``flat'' when reasoning about the physical world. We argue that this spatial bottleneck stems from a profound dimensional mismatch: while VLMs are trained to interpret 2D projections, true spatial reasoning demands the recovery of latent 3D geometry and temporal continuity. To conquer this high-dimensional complexity, we advocate a shift from monolithic learning to a ``divide and conquer'' paradigm. We present FactoSR, a factorized reinforcement learning framework that explicitly interpret the dimensions collapsed by visual projection. At its core, FactoSR decomposes the monolithic problem of world-consistent reasoning into three orthogonal, geometric sub-objectives: planar correspondence (XY), depth consistency (Z), and temporal reversibility (T). By optimizing these verifiable constraints within a unified policy learning mechanism, we effectively transform an ill-posed projection recovery problem into a series of tangible reasoning steps. Extensive evaluations on multi-view and video benchmarks demonstrate that this elegant decomposition yields substantial gains in 3D and 4D reasoning, achieving a 5.9% boost on VSI-Bench and 4.5% on All-Angles-Bench. Our findings suggest that reinforcing explicit, factorized 4D consistency is a critical step toward evolving VLMs into robust, world-aware reasoners.

Learning Functional Subspaces for Neural Network Compression

Modern transformers pair impressive capabilities with substantial memory and compute demands. Low-rank weight factorization reduces both while keeping the matrices dense, and thus efficient on standard hardware. Existing methods, however, choose the subspace to remove from each weight matrix with local closed-form criteria: activation energy, layer-wise reconstruction error, or a quadratic approximation of the loss. These criteria ignore how errors propagate through the network, so at high compression the errors compound with depth and performance collapses. We introduce Learnable Subspace Projections (LSP), which instead learns the subspaces to discard end-to-end. Each linear layer, or tied group of layers that read the same activations, is assigned an orthogonal projector. All projectors are optimized jointly against a global objective--the KL divergence to the dense model's output distribution or the model's original training loss--while the pretrained weights remain frozen. Projectors are initialized from a whitened SVD truncation, and ranks are allocated by the output KL each projector induces per parameter saved. After training, the projectors merge into standard low-rank factors, with each tied group sharing one factor. In attention, this also lets the model cache one narrow latent in place of full keys and values. Across LLMs (OPT-125M/1.3B, Qwen3-4B, Llama-2-7B) and ViT-B/16, LSP outperforms baselines, and its advantage widens as compression increases. At -70% compression, LSP brings Llama-2-7B to 10.9 WikiText-2 perplexity and 42.2% mean zero-shot accuracy, versus 13.3 and 36.0% for the strongest baseline. The factorized model decodes up to 1.6x faster than the dense model at small batch sizes, and aching the shared latent shrinks the combined memory of weights and KV cache by 13.5x at a 128k-token context, versus at most 6.5x for untied baseline factorizations.

  • 8 authors
·
Sep 29 2

Identifiability in Two-Layer Sparse Matrix Factorization

Sparse matrix factorization is the problem of approximating a matrix Z by a product of J sparse factors X^{(J)} X^{(J-1)} ldots X^{(1)}. This paper focuses on identifiability issues that appear in this problem, in view of better understanding under which sparsity constraints the problem is well-posed. We give conditions under which the problem of factorizing a matrix into two sparse factors admits a unique solution, up to unavoidable permutation and scaling equivalences. Our general framework considers an arbitrary family of prescribed sparsity patterns, allowing us to capture more structured notions of sparsity than simply the count of nonzero entries. These conditions are shown to be related to essential uniqueness of exact matrix decomposition into a sum of rank-one matrices, with structured sparsity constraints. In particular, in the case of fixed-support sparse matrix factorization, we give a general sufficient condition for identifiability based on rank-one matrix completability, and we derive from it a completion algorithm that can verify if this sufficient condition is satisfied, and recover the entries in the two sparse factors if this is the case. A companion paper further exploits these conditions to derive identifiability properties and theoretically sound factorization methods for multi-layer sparse matrix factorization with support constraints associated to some well-known fast transforms such as the Hadamard or the Discrete Fourier Transforms.

  • 3 authors
·
Nov 16, 2021

Householder Projector for Unsupervised Latent Semantics Discovery

Generative Adversarial Networks (GANs), especially the recent style-based generators (StyleGANs), have versatile semantics in the structured latent space. Latent semantics discovery methods emerge to move around the latent code such that only one factor varies during the traversal. Recently, an unsupervised method proposed a promising direction to directly use the eigenvectors of the projection matrix that maps latent codes to features as the interpretable directions. However, one overlooked fact is that the projection matrix is non-orthogonal and the number of eigenvectors is too large. The non-orthogonality would entangle semantic attributes in the top few eigenvectors, and the large dimensionality might result in meaningless variations among the directions even if the matrix is orthogonal. To avoid these issues, we propose Householder Projector, a flexible and general low-rank orthogonal matrix representation based on Householder transformations, to parameterize the projection matrix. The orthogonality guarantees that the eigenvectors correspond to disentangled interpretable semantics, while the low-rank property encourages that each identified direction has meaningful variations. We integrate our projector into pre-trained StyleGAN2/StyleGAN3 and evaluate the models on several benchmarks. Within only 1% of the original training steps for fine-tuning, our projector helps StyleGANs to discover more disentangled and precise semantic attributes without sacrificing image fidelity.

  • 4 authors
·
Jul 16, 2023

AdaPreLoRA: Adafactor Preconditioned Low-Rank Adaptation

Low-Rank Adaptation (LoRA) reparameterizes a weight update as a product of two low-rank factors, but the Jacobian J_{G} of the generator mapping the factors to the weight matrix is rank-deficient, so the factor-space preconditioner J_{G}^* {F}_t J_{G} induced by any {W}-space preconditioner {F}_t is singular, and consequently the standard chain rule cannot be uniquely inverted to map a preconditioned {W}-space direction back to a factor-space update. We cast existing LoRA optimizers in a unified framework parameterized by two choices: (i) which invertible surrogate for J_{G}^* {F}_t J_{G} to use, and (ii) which {F}_t on {W} to use. Existing methods occupy four families along these axes: factor-space adaptive updates, block-diagonal surrogates for J_{G}^* J_{G}, Frobenius-residual pseudoinverse methods, and Riemannian manifold constraint. Within this design space, a gradient-statistics-aware {F}_t paired with a closed-form factor-space solve at {O}((m+n)r) memory remains underexplored. We propose AdaPreLoRA, which fills this gap by adopting the Adafactor diagonal Kronecker preconditioner {H}_t on {W} and selecting from the resulting factor-space solution family the element minimizing an {H}_t-weighted imbalance between the two factor contributions; by construction, the resulting factor update is the closest LoRA approximation to the preconditioned {W}-space direction under the {H}_t-weighted norm. Across GPT-2 (E2E), Mistral-7B and Qwen2-7B (GLUE, ARC, GSM8K), and diffusion-model personalization, AdaPreLoRA is competitive with or improves over a representative set of LoRA optimizers while keeping peak GPU memory at the LoRA optimizer level.

  • 3 authors
·
May 8 1

Direct Factorization of the Karhunen-Loève Transform of AR(1) Sources

The Karhunen--Loève transform (KLT) of the stationary AR(1) source is the classical optimality benchmark of transform coding. Its frequencies are roots of the transcendental equations of Ray and Driver, and the transform has therefore long been treated as an unstructured dense matrix. Rather than compute the exact KLT, the field turned to fast approximations of it, most famously the discrete cosine transform (DCT). This paper shows that the retreat was premature. The exact AR(1) KLT admits direct recursive factorizations, at every order Nge2 and every correlation coefficient ρin(0,1): at even orders, the transform reduces to a butterfly stage, two half-order copies of itself, and orthogonal corrections generated by rank-one boundary perturbations of the covariance; at odd orders, to two copies of the KLT of the one-sided prediction residual and an arrowhead stage absorbing the center sample. The residual KLT recurses through half order as well. All correction stages are Cauchy-structured, and applying them by the fast multipole method yields exact-KLT algorithms of O(Nlog N) complexity---the same order as the FFT and the fast sinusoidal transforms. The factorizations follow from the covariance matrix by the Sherman--Morrison identity and the classical secular eigenvalue updates, and degenerate, as ρto1, to the known parity splittings of the DCT-II. As secondary results, the factorization constants are shown to be algebraic functions of ρ---in radicals for all Nle8---and complete exact KLT modules for N=2,dots,8 are given.

  • 1 authors
·
Aug 5

Low Rank Field-Weighted Factorization Machines for Low Latency Item Recommendation

Factorization machine (FM) variants are widely used in recommendation systems that operate under strict throughput and latency requirements, such as online advertising systems. FMs are known both due to their ability to model pairwise feature interactions while being resilient to data sparsity, and their computational graphs that facilitate fast inference and training. Moreover, when items are ranked as a part of a query for each incoming user, these graphs facilitate computing the portion stemming from the user and context fields only once per query. Consequently, in terms of inference cost, the number of user or context fields is practically unlimited. More advanced FM variants, such as FwFM, provide better accuracy by learning a representation of field-wise interactions, but require computing all pairwise interaction terms explicitly. The computational cost during inference is proportional to the square of the number of fields, including user, context, and item. When the number of fields is large, this is prohibitive in systems with strict latency constraints. To mitigate this caveat, heuristic pruning of low intensity field interactions is commonly used to accelerate inference. In this work we propose an alternative to the pruning heuristic in FwFMs using a diagonal plus symmetric low-rank decomposition. Our technique reduces the computational cost of inference, by allowing it to be proportional to the number of item fields only. Using a set of experiments on real-world datasets, we show that aggressive rank reduction outperforms similarly aggressive pruning, both in terms of accuracy and item recommendation speed. We corroborate our claim of faster inference experimentally, both via a synthetic test, and by having deployed our solution to a major online advertising system. The code to reproduce our experimental results is at https://github.com/michaelviderman/pytorch-fm/tree/dev.

  • 6 authors
·
Jul 21, 2024

SphereDiff: Tuning-free Omnidirectional Panoramic Image and Video Generation via Spherical Latent Representation

The increasing demand for AR/VR applications has highlighted the need for high-quality 360-degree panoramic content. However, generating high-quality 360-degree panoramic images and videos remains a challenging task due to the severe distortions introduced by equirectangular projection (ERP). Existing approaches either fine-tune pretrained diffusion models on limited ERP datasets or attempt tuning-free methods that still rely on ERP latent representations, leading to discontinuities near the poles. In this paper, we introduce SphereDiff, a novel approach for seamless 360-degree panoramic image and video generation using state-of-the-art diffusion models without additional tuning. We define a spherical latent representation that ensures uniform distribution across all perspectives, mitigating the distortions inherent in ERP. We extend MultiDiffusion to spherical latent space and propose a spherical latent sampling method to enable direct use of pretrained diffusion models. Moreover, we introduce distortion-aware weighted averaging to further improve the generation quality in the projection process. Our method outperforms existing approaches in generating 360-degree panoramic content while maintaining high fidelity, making it a robust solution for immersive AR/VR applications. The code is available here. https://github.com/pmh9960/SphereDiff

kaist-ai KAIST AI
·
Apr 19, 2025 2

Scaling DoRA: High-Rank Adaptation via Factored Norms and Fused Kernels

Weight-Decomposed Low-Rank Adaptation (DoRA) extends LoRA by decoupling weight magnitude from direction, but its forward pass requires the row-wise norm of W + sBA, a computation that every major framework we surveyed implements by materializing the dense [d_out, d_in] product BA. At d_in = 8192 and rank r = 384, a single module's norm requires about 512 MB of transient working memory in bf16, making high-rank DoRA costly and often infeasible on common single-GPU setups once hundreds of adapted modules and checkpointing are involved. We present two systems contributions. A factored norm decomposes the squared norm into base, cross, and Gram terms computable through O(d_out r + r^2) intermediates, eliminating the dense product. Fused Triton kernels collapse the four-kernel DoRA composition into a single pass, reducing memory traffic by about 4x and using a numerically stable form that avoids catastrophic cancellation in the near-unity rescaling regime where magnitude scales concentrate in practice. Across six 8-32B vision-language models (VLMs) on three NVIDIA GPUs (RTX 6000 PRO, H200, B200) at r = 384 in bf16, the fused implementation is 1.5-2.0x faster than Hugging Face PEFT's DoRA implementation for inference and 1.5-1.9x faster for gradient computation (optimizer step excluded), with up to 7 GB lower peak VRAM. Microbenchmarks on six GPUs spanning four architecture generations (L40S, A100, RTX 6000 PRO, H200, B200, B300) confirm 1.5-2.7x compose-kernel speedup. Final-logit cosine similarity exceeds 0.9999 across all model/GPU pairs, and multi-seed training curves match within 7.1 x 10^-4 mean per-step loss delta over 2000 steps.

  • 2 authors
·
Mar 23 2

Cylindric plane partitions, Lambda determinants, Commutants in semicircular systems

This thesis is divided into three parts. The first part deals with cylindric plane partitions. The second with lambda-determinants and the third with commutators in semi-circular systems. For more detailed abstract please see inside. Cylindric plane partitions may be thought of as a natural generalization of reverse plane partitions. A generating series for the enumeration of cylindric plane partitions was recently given by Borodin. The first result of section one is a new bijective proof of Borodin's identity which makes use of Fomin's growth diagram framework for generalized RSK correspondences. The second result is a (q,t)-analog of Borodin's identity which extends previous work by Okada in the reverse plane partition case. The third result is an explicit combinatorial interpretation of the Macdonald weight occurring in the (q,t)-analog using the non-intersecting lattice path model for cylindric plane partitions. Alternating sign matrices were discovered by Robbins and Rumsey whilst studying λ-determinants. In the second part of this thesis we prove a multi-parameter generalization of the λ-determinant, generalizing a recent result by di Francesco. Like the original λ-determinant, our formula exhibits the Laurent phenomenon. Semicircular systems were first introduced by Voiculescu as a part of his study of von Neumann algebras. In the third part of this thesis we study certain commutator subalgebras of the semicircular system. We find a projection matrix with an interesting self-similar structure. Making use of our projection formula we given an alternative, elementary proof that the semicircular system is a factor.

  • 1 authors
·
Oct 25, 2021

Factorized Video Generation: Decoupling Scene Construction and Temporal Synthesis in Text-to-Video Diffusion Models

State-of-the-art Text-to-Video (T2V) diffusion models can generate visually impressive results, yet they still frequently fail to compose complex scenes or follow logical temporal instructions. In this paper, we argue that many errors, including apparent motion failures, originate from the model's inability to construct a semantically correct or logically consistent initial frame. We introduce Factorized Video Generation (FVG), a pipeline that decouples these tasks by decomposing the Text-to-Video generation into three specialized stages: (1) Reasoning, where a Large Language Model (LLM) rewrites the video prompt to describe only the initial scene, resolving temporal ambiguities; (2) Composition, where a Text-to-Image (T2I) model synthesizes a high-quality, compositionally-correct anchor frame from this new prompt; and (3) Temporal Synthesis, where a video model, finetuned to understand this anchor, focuses its entire capacity on animating the scene and following the prompt. Our decomposed approach sets a new state-of-the-art on the T2V CompBench benchmark and significantly improves all tested models on VBench2. Furthermore, we show that visual anchoring allows us to cut the number of sampling steps by 70% without any loss in performance, leading to a substantial speed-up in sampling. Factorized Video Generation offers a simple yet practical path toward more efficient, robust, and controllable video synthesis

  • 4 authors
·
Dec 18, 2025

When Does Dense Retrieval Need Asymmetric Geometry? A Bias-Variance Theory of Shared and Dual Projections

Dense retrieval powers retrieval-augmented generation, semantic search, and question answering, yet the theoretical basis for choosing between shared and dual query-document projections remains unclear. We introduce a bias-variance theory for low-rank bilinear scoring. Shared projections induce positive-semidefinite operators, whereas dual projections realize arbitrary low-rank operators. We derive their exact approximation gap and prove a local Gaussian boundary: dual has lower risk exactly when squared directional signal exceeds the estimation cost of its additional degrees of freedom. This boundary motivates the Cross-fitted Asymmetry Risk Selector (CARS), which estimates reproducible directional signal from training pairs; its Gaussian counterpart admits exact selection-power and regret formulas. Guided by the theory, we run retrieval experiments across multiple datasets and embedding models. The mean Dual-minus-Shared NDCG@10 advantage more than doubles as query rotation increases from 0 degrees to 90 degrees. In the rank-sample-size grids, Shared wins 13 of 16 cells at n=32, whereas Dual wins all 32 cells at n=1024 and n=2048. Consistent with this shift, all 168 comparable operator-risk curves move toward Dual as training data grow. Compared to the two fixed-geometry baselines, CARS reduces held-out regret by 49-96% and achieves 90.1% mean geometry-selection accuracy.

Learning 3D Editing without Paired Supervision via Generative Prior Distillation

Instruction-guided 3D editing is essential for interactive content creation, yet it faces a significant bottleneck: the severe scarcity of high-quality paired training data. Existing approaches attempt to bypass this by either relying on slow test-time optimization or training on pseudo-pairs constructed via complex pipelines, which often introduce structural drift and geometric artifacts. In this paper, we propose a novel framework that learns feed-forward 3D editing without paired 3D supervision via Generative Prior Distillation. Instead of relying on ground-truth 3D pairs, our core idea is to distill visual, semantic, and geometric knowledge from powerful foundation models directly into a 3D editing model. Specifically, through a differentiable rendering pipeline, we supervise the 3D representation using two complementary signals: a 2D visual prior from an image editing model at the main editing view, and a semantic prior from a Vision-Language Model at novel views to ensure strict instruction following and source identity preservation. Crucially, to address the geometric collapse and multi-view inconsistencies inherent in 2D projection supervision, we introduce a 3D-aware Distribution Matching regularization. Acting as a geometric prior, this term operates in the 3D latent space, constraining the edited output to remain within the manifold of realistic 3D assets defined by a pretrained image to 3D teacher model. Extensive experiments demonstrate that our method achieves superior instruction fidelity and cross-view consistency, significantly outperforming state-of-the-art baselines. Our project is available at: https://github.com/thiamine128/PriorEdit3D.

  • 7 authors
·
Sep 3 2

XFACTORS: Disentangled Information Bottleneck via Contrastive Supervision

Disentangled representation learning aims to map independent factors of variation to independent representation components. On one hand, purely unsupervised approaches have proven successful on fully disentangled synthetic data, but fail to recover semantic factors from real data without strong inductive biases. On the other hand, supervised approaches are unstable and hard to scale to large attribute sets because they rely on adversarial objectives or auxiliary classifiers. We introduce XFactors, a weakly-supervised VAE framework that disentangles and provides explicit control over a chosen set of factors. Building on the Disentangled Information Bottleneck perspective, we decompose the representation into a residual subspace S and factor-specific subspaces T_1,ldots,T_K and a residual subspace S. Each target factor is encoded in its assigned T_i through contrastive supervision: an InfoNCE loss pulls together latents sharing the same factor value and pushes apart mismatched pairs. In parallel, KL regularization imposes a Gaussian structure on both S and the aggregated factor subspaces, organizing the geometry without additional supervision for non-targeted factors and avoiding adversarial training and classifiers. Across multiple datasets, with constant hyperparameters, XFactors achieves state-of-the-art disentanglement scores and yields consistent qualitative factor alignment in the corresponding subspaces, enabling controlled factor swapping via latent replacement. We further demonstrate that our method scales correctly with increasing latent capacity and evaluate it on the real-world dataset CelebA. Our code is available at https://github.com/ICML26-anon/XFactors{github.com/ICML26-anon/XFactors}.

  • 6 authors
·
Jan 29

MoNo: Multiscale Optimal Transport Neural Operator for Solving PDEs on General Geometries

Transformer-based neural operators have achieved substantial progress in solving Partial Differential Equations (PDEs) by projecting spatial observations into compact latent tokens and learning physical interactions in latent spaces. However, we reveal that existing learnable projection mechanisms cannot ensure stable and balanced assignments from observation points to latent tokens, causing some latent tokens to be over-assigned while others remain underutilized. This limitation further restricts the design of hierarchical architectures, as assignment imbalance is continuously inherited and amplified across latent spaces, eventually causing severe token collapse in deeper spaces. To address these issues, we propose MoNo (Multiscale Optimal Transport Neural Operator), a progressive multiscale neural operator that efficiently solves PDEs on general geometries through stable latent-space construction. At its core is CoTAP (Cross-scale Optimal Transport Assignment and Projection), a novel latent-space construction method that formulates cross-space assignment between adjacent spaces as an entropy-regularized optimal transport problem, thereby constructing balanced bidirectional projections and stable latent spaces. CoTAP also ensures stable information transfer across multiple latent spaces, further enabling multiscale architectures on general geometries, which in turn support more efficient learning of long-range physical interactions. Extensive experiments demonstrate that MoNo outperforms existing state-of-the-art neural operators in both prediction performance and computational efficiency. Code is available at https://github.com/ZijiangY1116/MoNo.

  • 3 authors
·
Aug 9

Repulsor: Accelerating Generative Modeling with a Contrastive Memory Bank

The dominance of denoising generative models (e.g., diffusion, flow-matching) in visual synthesis is tempered by their substantial training costs and inefficiencies in representation learning. While injecting discriminative representations via auxiliary alignment has proven effective, this approach still faces key limitations: the reliance on external, pre-trained encoders introduces overhead and domain shift. A dispersed-based strategy that encourages strong separation among in-batch latent representations alleviates this specific dependency. To assess the effect of the number of negative samples in generative modeling, we propose {\mname}, a plug-and-play training framework that requires no external encoders. Our method integrates a memory bank mechanism that maintains a large, dynamically updated queue of negative samples across training iterations. This decouples the number of negatives from the mini-batch size, providing abundant and high-quality negatives for a contrastive objective without a multiplicative increase in computational cost. A low-dimensional projection head is used to further minimize memory and bandwidth overhead. {\mname} offers three principal advantages: (1) it is self-contained, eliminating dependency on pretrained vision foundation models and their associated forward-pass overhead; (2) it introduces no additional parameters or computational cost during inference; and (3) it enables substantially faster convergence, achieving superior generative quality more efficiently. On ImageNet-256, {\mname} achieves a state-of-the-art FID of 2.40 within 400k steps, significantly outperforming comparable methods.

  • 10 authors
·
Dec 9, 2025

An Exterior Method for Nonnegative Matrix Factorization

Nonnegative matrix factorization (NMF) seeks a low-rank approximation X approx UV^T with nonnegative factors and is commonly solved using interior methods that enforce feasibility throughout optimization. We show that such constraint-driven approaches can impede progress in the nonconvex landscape, leading to slow convergence or convergence to suboptimal stationary points. We propose an exterior framework for NMF (eNMF) that separates low-rank approximation from nonnegativity enforcement. Our method initializes from the optimal unconstrained factorization and introduces a rotation procedure that maps unconstrained factors to an exterior point closest to the nonnegative orthant. This viewpoint yields an algorithmic framework in which simple iterative updates converge to KKT-satisfying stationary points on the boundary of the positive orthant. The exterior formulation also enables a geometric interpretation of NMF solutions, clarifying equivalence classes of factorizations under permutation and orthogonal transformations. An intriguing numerical result, involving 400 NMF experiments across both real and synthetic datasets, show that in 99% of the cases, different algorithms tend to converge towards equivalent factor matrices. We benchmark eNMF against 9 state-of-the-art NMF algorithms with 9 initialization schemes across 3 real-world and 2 synthetic datasets. eNMF consistently outperforms all 81 competitors, achieving up to 30% lower reconstruction error under equal-time settings and up to 150% speedup under equal-error settings. The downstream experiments further demonstrate substantial performance gains in audio processing and recommendation tasks, corroborating the practical benefits of the proposed exterior optimization framework. Code is available at https://github.com/roychowdhuryresearch/eNMF

  • 5 authors
·
May 18

Simple Projection Variants Improve ColBERT Performance

Multi-vector dense retrieval methods like ColBERT systematically use a single-layer linear projection to reduce the dimensionality of individual vectors. In this study, we explore the implications of the MaxSim operator on the gradient flows of the training of multi-vector models and show that such a simple linear projection has inherent, if non-critical, limitations in this setting. We then discuss the theoretical improvements that could result from replacing this single-layer projection with well-studied alternative feedforward linear networks (FFN), such as deeper, non-linear FFN blocks, GLU blocks, and skip-connections, could alleviate these limitations. Through the design and systematic evaluation of alternate projection blocks, we show that better-designed final projections positively impact the downstream performance of ColBERT models. We highlight that many projection variants outperform the original linear projections, with the best-performing variants increasing average performance on a range of retrieval benchmarks across domains by over 2 NDCG@10 points. We then conduct further exploration on the individual parameters of these projections block in order to understand what drives this empirical performance, highlighting the particular importance of upscaled intermediate projections and residual connections. As part of these ablation studies, we show that numerous suboptimal projection variants still outperform the traditional single-layer projection across multiple benchmarks, confirming our hypothesis. Finally, we observe that this effect is consistent across random seeds, further confirming that replacing the linear layer of ColBERT models is a robust, drop-in upgrade.

  • 5 authors
·
Oct 14, 2025

Weighted least-squares approximation with determinantal point processes and generalized volume sampling

We consider the problem of approximating a function from L^2 by an element of a given m-dimensional space V_m, associated with some feature map varphi, using evaluations of the function at random points x_1,dots,x_n. After recalling some results on optimal weighted least-squares using independent and identically distributed points, we consider weighted least-squares using projection determinantal point processes (DPP) or volume sampling. These distributions introduce dependence between the points that promotes diversity in the selected features varphi(x_i). We first provide a generalized version of volume-rescaled sampling yielding quasi-optimality results in expectation with a number of samples n = O(mlog(m)), that means that the expected L^2 error is bounded by a constant times the best approximation error in L^2. Also, further assuming that the function is in some normed vector space H continuously embedded in L^2, we further prove that the approximation is almost surely bounded by the best approximation error measured in the H-norm. This includes the cases of functions from L^infty or reproducing kernel Hilbert spaces. Finally, we present an alternative strategy consisting in using independent repetitions of projection DPP (or volume sampling), yielding similar error bounds as with i.i.d. or volume sampling, but in practice with a much lower number of samples. Numerical experiments illustrate the performance of the different strategies.

  • 2 authors
·
Dec 21, 2023

Factorized-Dreamer: Training A High-Quality Video Generator with Limited and Low-Quality Data

Text-to-video (T2V) generation has gained significant attention due to its wide applications to video generation, editing, enhancement and translation, \etc. However, high-quality (HQ) video synthesis is extremely challenging because of the diverse and complex motions existed in real world. Most existing works struggle to address this problem by collecting large-scale HQ videos, which are inaccessible to the community. In this work, we show that publicly available limited and low-quality (LQ) data are sufficient to train a HQ video generator without recaptioning or finetuning. We factorize the whole T2V generation process into two steps: generating an image conditioned on a highly descriptive caption, and synthesizing the video conditioned on the generated image and a concise caption of motion details. Specifically, we present Factorized-Dreamer, a factorized spatiotemporal framework with several critical designs for T2V generation, including an adapter to combine text and image embeddings, a pixel-aware cross attention module to capture pixel-level image information, a T5 text encoder to better understand motion description, and a PredictNet to supervise optical flows. We further present a noise schedule, which plays a key role in ensuring the quality and stability of video generation. Our model lowers the requirements in detailed captions and HQ videos, and can be directly trained on limited LQ datasets with noisy and brief captions such as WebVid-10M, largely alleviating the cost to collect large-scale HQ video-text pairs. Extensive experiments in a variety of T2V and image-to-video generation tasks demonstrate the effectiveness of our proposed Factorized-Dreamer. Our source codes are available at https://github.com/yangxy/Factorized-Dreamer/.

  • 6 authors
·
Aug 19, 2024 3

MonoDGP: Monocular 3D Object Detection with Decoupled-Query and Geometry-Error Priors

Perspective projection has been extensively utilized in monocular 3D object detection methods. It introduces geometric priors from 2D bounding boxes and 3D object dimensions to reduce the uncertainty of depth estimation. However, due to depth errors originating from the object's visual surface, the height of the bounding box often fails to represent the actual projected central height, which undermines the effectiveness of geometric depth. Direct prediction for the projected height unavoidably results in a loss of 2D priors, while multi-depth prediction with complex branches does not fully leverage geometric depth. This paper presents a Transformer-based monocular 3D object detection method called MonoDGP, which adopts perspective-invariant geometry errors to modify the projection formula. We also try to systematically discuss and explain the mechanisms and efficacy behind geometry errors, which serve as a simple but effective alternative to multi-depth prediction. Additionally, MonoDGP decouples the depth-guided decoder and constructs a 2D decoder only dependent on visual features, providing 2D priors and initializing object queries without the disturbance of 3D detection. To further optimize and fine-tune input tokens of the transformer decoder, we also introduce a Region Segment Head (RSH) that generates enhanced features and segment embeddings. Our monocular method demonstrates state-of-the-art performance on the KITTI benchmark without extra data. Code is available at https://github.com/PuFanqi23/MonoDGP.

  • 4 authors
·
Oct 25, 2024

Towards Generalizable Robotic Data Flywheel: High-Dimensional Factorization and Composition

The lack of sufficiently diverse data, coupled with limited data efficiency, remains a major bottleneck for generalist robotic models, yet systematic strategies for collecting and curating such data are not fully explored. Task diversity arises from implicit factors that are sparsely distributed across multiple dimensions and are difficult to define explicitly. To address this challenge, we propose F-ACIL, a heuristic factor-aware compositional iterative learning framework that enables structured data factorization and promotes compositional generalization. F-ACIL decomposes the data distribution into structured factor spaces such as object, action, and environment. Based on the factorized formulation, we develop a factor-wise data collection and an iterative training paradigm that promotes compositional generalization over the high-dimensional factor space, leading to more effective utilization of real-world robotic demonstrations. With extensive real-world experiments, we show that F-ACIL can achieve more than 45% performance gains with 5-10times fewer demonstrations comparing to that of which without the strategy. The results suggest that structured factorization offers a practical pathway toward efficient compositional generalization in real-world robotic learning. We believe F-ACIL can inspire more systematic research on building generalizable robotic data flywheel strategies. More demonstrations can be found at: https://f-acil.github.io/

  • 5 authors
·
Mar 25

No 3D Matrices: A Unified Tensor-Product View of Matrix-Free Cartesian PDE Solvers

Every Cartesian three-dimensional PDE solver hides a structural secret that production CFD codes have used for half a century and that graduate-level textbooks rarely state plainly. The derivative matrices, the compact Padé line solves, the Galerkin mass inversions, the alternating-direction-implicit substeps, and even the fast Poisson and Helmholtz diagonalization transforms all factor along the coordinate axes and collapse into repeated one-dimensional banded kernels executed along the grid lines. The three-dimensional operator exists only on paper; it is never assembled, factored, or stored. This paper is the manual for that collapse. We derive the Kronecker-product algebra that makes it exact, carry it cleanly through central differences, compact schemes, tensor-product Galerkin, B-spline and isogeometric methods, collocation, ADI time stepping, and direct Poisson and Helmholtz solves, and bring into the open the three production tricks that turn the reduction into hardware-conscious floating-point throughput on real machines: the multi-right-hand-side reshape that exposes a sweep as one batched line kernel (a dense BLAS-3 GEMM when the line factor is dense or element-local, a banded or stencil kernel when it is not), the sum factorization that rescues high-order Galerkin from the O(p^{2d}) quadrature trap, and the pencil decomposition that keeps every direction contiguous across an MPI cluster. For fixed stencil width or fixed polynomial degree, the compute cost stays O(N) in the total number of unknowns N = N_x N_y N_z; the operator storage drops to O(N_x + N_y + N_z) up to bandwidth constants; direct separable Poisson and Helmholtz solvers add the expected transform cost; the line kernels are embarrassingly parallel. These facts are familiar to practitioners but rarely assembled in one place; this paper collects them and shows how to use them.

  • 2 authors
·
Jun 22

Functional Bayesian Tucker Decomposition for Continuous-indexed Tensor Data

Tucker decomposition is a powerful tensor model to handle multi-aspect data. It demonstrates the low-rank property by decomposing the grid-structured data as interactions between a core tensor and a set of object representations (factors). A fundamental assumption of such decomposition is that there are finite objects in each aspect or mode, corresponding to discrete indexes of data entries. However, real-world data is often not naturally posed in this setting. For example, geographic data is represented as continuous indexes of latitude and longitude coordinates, and cannot fit tensor models directly. To generalize Tucker decomposition to such scenarios, we propose Functional Bayesian Tucker Decomposition (FunBaT). We treat the continuous-indexed data as the interaction between the Tucker core and a group of latent functions. We use Gaussian processes (GP) as functional priors to model the latent functions. Then, we convert each GP into a state-space prior by constructing an equivalent stochastic differential equation (SDE) to reduce computational cost. An efficient inference algorithm is developed for scalable posterior approximation based on advanced message-passing techniques. The advantage of our method is shown in both synthetic data and several real-world applications. We release the code of FunBaT at https://github.com/xuangu-fang/Functional-Bayesian-Tucker-Decomposition.

  • 6 authors
·
Nov 8, 2023

Language model compression with weighted low-rank factorization

Factorizing a large matrix into small matrices is a popular strategy for model compression. Singular value decomposition (SVD) plays a vital role in this compression strategy, approximating a learned matrix with fewer parameters. However, SVD minimizes the squared error toward reconstructing the original matrix without gauging the importance of the parameters, potentially giving a larger reconstruction error for those who affect the task accuracy more. In other words, the optimization objective of SVD is not aligned with the trained model's task accuracy. We analyze this previously unexplored problem, make observations, and address it by introducing Fisher information to weigh the importance of parameters affecting the model prediction. This idea leads to our method: Fisher-Weighted SVD (FWSVD). Although the factorized matrices from our approach do not result in smaller reconstruction errors, we find that our resulting task accuracy is much closer to the original model's performance. We perform analysis with the transformer-based language models, showing our weighted SVD largely alleviates the mismatched optimization objectives and can maintain model performance with a higher compression rate. Our method can directly compress a task-specific model while achieving better performance than other compact model strategies requiring expensive model pre-training. Moreover, the evaluation of compressing an already compact model shows our method can further reduce 9% to 30% parameters with an insignificant impact on task accuracy.

  • 6 authors
·
Jun 30, 2022

LowFER: Low-rank Bilinear Pooling for Link Prediction

Knowledge graphs are incomplete by nature, with only a limited number of observed facts from the world knowledge being represented as structured relations between entities. To partly address this issue, an important task in statistical relational learning is that of link prediction or knowledge graph completion. Both linear and non-linear models have been proposed to solve the problem. Bilinear models, while expressive, are prone to overfitting and lead to quadratic growth of parameters in number of relations. Simpler models have become more standard, with certain constraints on bilinear map as relation parameters. In this work, we propose a factorized bilinear pooling model, commonly used in multi-modal learning, for better fusion of entities and relations, leading to an efficient and constraint-free model. We prove that our model is fully expressive, providing bounds on the embedding dimensionality and factorization rank. Our model naturally generalizes Tucker decomposition based TuckER model, which has been shown to generalize other models, as efficient low-rank approximation without substantially compromising the performance. Due to low-rank approximation, the model complexity can be controlled by the factorization rank, avoiding the possible cubic growth of TuckER. Empirically, we evaluate on real-world datasets, reaching on par or state-of-the-art performance. At extreme low-ranks, model preserves the performance while staying parameter efficient.

  • 4 authors
·
Aug 25, 2020

Maestro: Uncovering Low-Rank Structures via Trainable Decomposition

Deep Neural Networks (DNNs) have been a large driver and enabler for AI breakthroughs in recent years. These models have been getting larger in their attempt to become more accurate and tackle new upcoming use-cases, including AR/VR and intelligent assistants. However, the training process of such large models is a costly and time-consuming process, which typically yields a single model to fit all targets. To mitigate this, various techniques have been proposed in the literature, including pruning, sparsification or quantization of the model weights and updates. While able to achieve high compression rates, they often incur computational overheads or accuracy penalties. Alternatively, factorization methods have been leveraged to incorporate low-rank compression in the training process. Similarly, such techniques (e.g.,~SVD) frequently rely on the computationally expensive decomposition of layers and are potentially sub-optimal for non-linear models, such as DNNs. In this work, we take a further step in designing efficient low-rank models and propose Maestro, a framework for trainable low-rank layers. Instead of regularly applying a priori decompositions such as SVD, the low-rank structure is built into the training process through a generalized variant of Ordered Dropout. This method imposes an importance ordering via sampling on the decomposed DNN structure. Our theoretical analysis demonstrates that our method recovers the SVD decomposition of linear mapping on uniformly distributed data and PCA for linear autoencoders. We further apply our technique on DNNs and empirically illustrate that Maestro enables the extraction of lower footprint models that preserve model performance while allowing for graceful accuracy-latency tradeoff for the deployment to devices of different capabilities.

  • 4 authors
·
Aug 28, 2023

Latent Riemannian Flow Matching for Geometry-Grounded 3D Foundation Models

Geometric foundation models, such as the Visual Geometry Grounded Transformer (VGGT), provide strong 3D priors from unposed images. However, such models operate purely in a feed-forward, deterministic regime, \ie~they cannot generate plausible geometry beyond what the input views directly support. Generative models for 3D scenes, on the other hand, must rely on strong geometric priors to produce coherent outputs from sparse inputs. We bridge these two paradigms by performing flow matching directly in VGGT's latent space, leveraging its learned 3D priors without committing to any explicit downstream representation such as Gaussians, meshes, or video-VAE latents. This requires respecting the latent geometry: VGGT tokens occupy a product of high-dimensional hyperspheres on which standard Euclidean flow matching fails. We address this with a Riemannian Flow Matching framework defined on a product manifold of four hyperspheres, aligned with VGGT's multi-scale encoder, which keeps generated tokens on the valid data manifold required by the frozen decoding heads. On RealEstate10K, ScanNet++ and ETH3D, our method achieves strong performance against recent scene generation baselines in both per-view appearance and aggregated 3D geometry, establishing latent-space flow matching on geometric foundation models as a viable paradigm for 3D generation. The project page can be found https://lisaweijler.github.io/geometry-grounded-rfm/{here}.

  • 5 authors
·
Jul 20

Polynomial Acceleration of Alternating Projections: Chebyshev Acceleration, Convergence Rates, and Retractions

Alternating projections (AP) near a clean intersection of smooth manifolds can converge slowly when the Friedrichs angle is small. We develop the Fixed-Point Manifold Acceleration (FPMA) framework for {local convergence and polynomial acceleration of} smooth maps that fix a manifold pointwise. {Under suitable regularity and uniform normal spectral stability, FPMA establishes local R-linear convergence and a smooth limiting map inducing a local retraction. At fixed points, consistent polynomial acceleration with p(1)=1 preserves the selected limit's first-order response to normal initial perturbations whenever the transformed normal blocks are uniformly spectrally stable. Under sufficient smoothness, we give a curvature criterion for second-order induced retractions and show that stable consistent polynomial acceleration preserves both the quadratic retraction expansion and this criterion. {As a special case, we establish new local R-linear convergence guarantees for fixed-degree Chebyshev-accelerated exact AP and second-order induced retractions. For uniform Friedrichs angle θ_Fin(0,π/2), acceleration strictly improves the local convergence rate per AP evaluation. The large-degree limiting spectral factor at fixed θ_F predicts O(θ_F^{-1}) evaluations for fixed relative error reduction as θ_Fdownarrow0, versus O(θ_F^{-2}) for ordinary AP.}} {The framework also covers} inexact, relaxed, and generalized AP {under their respective regularity and stability conditions.}

  • 2 authors
·
Oct 4

ProjectedEx: Enhancing Generation in Explainable AI for Prostate Cancer

Prostate cancer, a growing global health concern, necessitates precise diagnostic tools, with Magnetic Resonance Imaging (MRI) offering high-resolution soft tissue imaging that significantly enhances diagnostic accuracy. Recent advancements in explainable AI and representation learning have significantly improved prostate cancer diagnosis by enabling automated and precise lesion classification. However, existing explainable AI methods, particularly those based on frameworks like generative adversarial networks (GANs), are predominantly developed for natural image generation, and their application to medical imaging often leads to suboptimal performance due to the unique characteristics and complexity of medical image. To address these challenges, our paper introduces three key contributions. First, we propose ProjectedEx, a generative framework that provides interpretable, multi-attribute explanations, effectively linking medical image features to classifier decisions. Second, we enhance the encoder module by incorporating feature pyramids, which enables multiscale feedback to refine the latent space and improves the quality of generated explanations. Additionally, we conduct comprehensive experiments on both the generator and classifier, demonstrating the clinical relevance and effectiveness of ProjectedEx in enhancing interpretability and supporting the adoption of AI in medical settings. Code will be released at https://github.com/Richardqiyi/ProjectedEx

  • 14 authors
·
Jan 2, 2025

SVD-Free Low-Rank Adaptive Gradient Optimization for Large Language Models

Low-rank optimization has emerged as a promising direction in training large language models (LLMs) to reduce the memory usage of adaptive optimizers by constraining learning to a lower-dimensional space. Prior work typically projects gradients of linear layers using approaches based on Singular Value Decomposition (SVD). However, applying SVD-based procedures individually to each layer in large models is computationally expensive and incurs additional memory costs due to storing the projection matrices. In this work, we propose a computationally efficient and conceptually simple two-step procedure to approximate SVD-based gradient projections into lower-dimensional spaces. First, we construct a complete orthogonal basis using predefined orthogonal matrices of the Discrete Cosine Transform (DCT). Second, we adaptively select basis columns based on their alignment with the gradient of each layer. Each projection matrix in our method is obtained via a single matrix multiplication followed by a lightweight sorting step to identify the most relevant basis vectors. Due to the predefined nature of the orthogonal bases, they are computed once at the start of training. During training, we store only the indices of the selected columns, avoiding the need to store full projection matrices for each layer. Our numerical experiments on both pre-training and fine-tuning tasks demonstrate the effectiveness of our dual strategy in approximating optimal low-rank projections, matching the performance of costly SVD-based methods while achieving faster runtime and reduced memory usage.

  • 4 authors
·
May 23, 2025

PANO: Parallel Latent Space Neural Operator for Solving PDEs

Aggregating observations into a limited number of latent tokens and learning physical interactions in the latent space has emerged as an effective approach for Transformer-based neural operators to solve Partial Differential Equation (PDE) problems involving large-scale observations. However, existing methods typically compress observations using a single aggregation pattern, making physical information not retained by that pattern invisible to the latent space and thereby constraining physical interactions within it. To address this limitation, we propose PArallel Latent Space Neural Operator (PANO), a novel neural operator for solving PDEs that formulates physical interactions among observations as an additive combination of interaction results from parallel latent spaces with shared parameters. Specifically, PANO transforms observations into multiple distinct compressed representations through independent mappings, learns physical interactions in parallel based on these representations, and finally fuses the decoded results to predict the target physical field. Within PANO, we further propose Coupled Assignment Projection (CAP) to construct bidirectionally consistent encoding and decoding mappings, and Pairwise Latent Space Attention Layer (PaLA) to jointly update latent representations of each latent space through adaptive cross-space interactions. Extensive experiments on nine benchmarks spanning diverse physical systems, geometries, and observation scales demonstrate that PANO achieves state-of-the-art performance. Notably, PANO reduces equivalent plastic strain prediction errors on Unilateral Stamping by 28.3% (or more) and lift-coefficient prediction errors on AirCraft by 21.4% (or more) compared with existing methods. Code is available at https://github.com/ZijiangY1116/PANO.

  • 4 authors
·
Nov 16

Contraction-Gauge Preconditioning for Quantized Matrix Multiplication

We study low-precision computation of C=AB with both factors quantized. We derive an exact finite-dimensional identity for the expected squared product error under independent, zero-mean entrywise errors with known variance fields; it holds exactly for non-overloading subtractive dither and for independent stochastic rounding, and we empirically assess deterministic round-to-nearest (RTN). Using the product-preserving equivalence AB=(AT)(T^{-1}B), we formulate contraction-gauge preconditioning: jointly choosing a factor representation and its sharing pattern before quantization. Preconditioning can reduce product error but may require extra transformed, quantized copies of the opposite operand: a shared transform needs one copy, a block-specific transform up to one per block. Within the bounded family of positive diagonal gauges (folds), a geometric program computes a globally optimal shared fold and a linear program decides whether the identity fold is already optimal. For other families we derive computable selection statistics -- tail index for scaling, profile spread for partitioning, coherence and weighted-Gram energy for rotations, slice-energy covariance for hierarchy depth -- with upper bounds for ranking heuristic candidates. Across twelve linear products from a trained three-block image classifier, median within-product rank correlations between dither-model predictions and deterministic-RTN errors are 0.937 at 8 bits and 0.918 at 4 bits. The GP fold cuts held-out product error over the identity fold by 18.0% (8-bit) and 20.5% (4-bit) in geometric mean, beats a SmoothQuant-style grid baseline at both precisions and on ten of twelve products, and lowers composed logit MSE by 15.4% and 26.4%. We thus provide exact stochastic product-error accounting, certified selection within the diagonal family, and a common objective for evaluating reusable transform candidates under RTN.

  • 5 authors
·
Jul 20

Beyond the Birkhoff Polytope: Spectral-Sphere-Constrained Hyper-Connections

Hyper-Connections (HC) generalize residual connections into multiple streams, employing residual matrices for cross-stream feature mixing to enrich model expressivity. However, unconstrained mixing disrupts the identity mapping property intrinsic to the residual connection, causing unstable training. To address this, Manifold-Constrained Hyper-Connections (mHC) and its variant restrict these matrices to the Birkhoff polytope (doubly stochastic matrices) via Sinkhorn iterations or permutation-based parameterizations. We reveal three limitations of this polytope constraint: (1) identity degeneration, where learned matrices collapse around the identity and diminish cross-stream interactions, (2) an expressivity bottleneck, as the non-negativity constraint prevents subtractive feature disentanglement, and (3) parameterization inefficiencies, manifesting as unstable Sinkhorn iterations or the factorial-scaling overhead of permutation-based parameterizations. To overcome these flaws, we propose Spectral-Sphere-Constrained Hyper-Connections (sHC). By geometrically shifting the feasible set from a rigid polytope to a spectral norm sphere, sHC allows negative entries, unlocking subtractive interactions for selective feature diversification. This shift eliminates unstable Sinkhorn projections and factorial parameterization, enabling expressive, non-degenerate residual matrices while preserving training stability.

  • 3 authors
·
Mar 21

Revisiting Diffusion Model Predictions Through Dimensionality

Recent advances in diffusion and flow matching models have highlighted a shift in the preferred prediction target -- moving from noise (varepsilon) and velocity (v) to direct data (x) prediction -- particularly in high-dimensional settings. However, a formal explanation of why the optimal target depends on the specific properties of the data remains elusive. In this work, we provide a theoretical framework based on a generalized prediction formulation that accommodates arbitrary output targets, of which varepsilon-, v-, and x-prediction are special cases. We derive the analytical relationship between data's geometry and the optimal prediction target, offering a rigorous justification for why x-prediction becomes superior when the ambient dimension significantly exceeds the data's intrinsic dimension. Furthermore, while our theory identifies dimensionality as the governing factor for the optimal prediction target, the intrinsic dimension of manifold-bound data is typically intractable to estimate in practice. To bridge this gap, we propose k-Diff, a framework that employs a data-driven approach to learn the optimal prediction parameter k directly from data, bypassing the need for explicit dimension estimation. Extensive experiments in both latent-space and pixel-space image generation demonstrate that k-Diff consistently outperforms fixed-target baselines across varying architectures and data scales, providing a principled and automated approach to enhancing generative performance.

  • 2 authors
·
Jan 29 2

FactorLLM: Factorizing Knowledge via Mixture of Experts for Large Language Models

Recent research has demonstrated that Feed-Forward Networks (FFNs) in Large Language Models (LLMs) play a pivotal role in storing diverse linguistic and factual knowledge. Conventional methods frequently face challenges due to knowledge confusion stemming from their monolithic and redundant architectures, which calls for more efficient solutions with minimal computational overhead, particularly for LLMs. In this paper, we explore the FFN computation paradigm in LLMs and introduce FactorLLM, a novel approach that decomposes well-trained dense FFNs into sparse sub-networks without requiring any further modifications, while maintaining the same level of performance. Furthermore, we embed a router from the Mixture-of-Experts (MoE), combined with our devised Prior-Approximate (PA) loss term that facilitates the dynamic activation of experts and knowledge adaptation, thereby accelerating computational processes and enhancing performance using minimal training data and fine-tuning steps. FactorLLM thus enables efficient knowledge factorization and activates select groups of experts specifically tailored to designated tasks, emulating the interactive functional segmentation of the human brain. Extensive experiments across various benchmarks demonstrate the effectiveness of our proposed FactorLLM which achieves comparable performance to the source model securing up to 85% model performance while obtaining over a 30% increase in inference speed. Code: https://github.com/zhenwuweihe/FactorLLM.

  • 9 authors
·
Aug 15, 2024

Factorized MLLM Embeddings for Composed Image Retrieval

Composed Image Retrieval (CIR) aims to retrieve a target image given a reference image and a modification text. Although recent approaches leveraging Multimodal Large Language Models (MLLMs) have shown significant progress, we argue that the MLLM's compositional understanding remains underutilized. This stems from directly mapping composed queries into a retrieval embedding via contrastive supervision alone, without explicitly resolving the intended visual modifications. In this work, we introduce Factorized MLLM Embeddings (FactEmbed), which decouples compositional query comprehension from building discriminative embeddings. Rather than directly projecting the composed query into a single embedding without internal reasoning, FactEmbed employs a set of factorized latents that simulate the intended visual modifications via an intermediate target imagination objective. This process encourages the latents to ground into target semantics before forming discriminative representations for retrieval. Subsequently, to propagate these factorized representations throughout the model for retrieval, we optimize a factor-level contrastive loss while distilling the decomposed representations into a deeper attention layer of the MLLM. Finally, for efficient inference, we retain the [EOS] token to establish a global-level embedding on top of these factorized latents, while we exploit the mean-pooled factorized latents to rerank a short candidate list at negligible cost, as both are produced by the same forward pass. Extensive evaluations demonstrate that FactEmbed outperforms prior works across CIR benchmarks.

kaist-ai KAIST AI
·
Nov 2 2