Daily Papers

Brain encoding models aim to predict neural responses to stimuli. The most widely used approach fits readouts from frozen pretrained backbones. Using neural data to train large models from scratch or fully fine-tune them after task-pretraining has proven difficult because neural data is costly and limited. We show that parameter-efficient fine-tuning (PEFT) enables us to effectively adapt very large pretrained backbones for brain encoding with a small number of trainable parameters. To make it computationally practical, we exploit the backbone's causal structure to predict multiple timepoints in a single pass instead of using sliding windows, significantly reducing feature-extraction cost. This enables efficient fine-tuning of multimodal backbones with up to 104B parameters, the largest model adapted for brain encoding to our knowledge. Trained with a low-rank adapter (LoRA) and a lightweight readout, our approach consistently improves brain encoding performance across nine diverse multimodal backbones. On the same Qwen3-Omni backbone as the prior state-of-the-art (SoTA), our method BrainLoRA achieves the best published performance on the Algonauts 2025 Challenge. We also show the adapted multimodal backbones remain interpretable: modality attribution recovers the canonical sensory topography that prior work often obtains by construction from separate unimodal encoders, and neural adaptation increases the contribution of audio inputs and cross-modal mixing within the backbone. To scale out the number of adapted models, we develop a multi-LoRA kernel that accelerates joint training of multiple LoRAs on a shared backbone. This enables an ensemble of 200+ adapted models that ranks first on the public Algonauts post-challenge leaderboard at the time of writing. Together, our results highlight PEFT as an efficient and powerful paradigm for brain encoding.

Candidate-scoring decision models return a probability distribution over a presented set of answers. Public documentation of one such system, Jev, and of an open counterpart, JevAny, describes three training ingredients that determine what these probabilities estimate: soft targets from larger models, a frozen pretrained backbone and temperature calibration. We analyze each ingredient in Gaussian surrogates where the finite-sample risk can be computed exactly. A student trained on teacher targets inherits the teacher's bias, which more student data does not remove and agreement with the teacher does not reveal. A fixed representation lowers the risk only below an explicit sample-size threshold. In a probit model the exact recalibration map is a temperature scaling, which removes all excess risk only when the teacher's coefficient has the correct direction and otherwise leaves a residual that calibration diagnostics do not detect. Under Luce's choice axiom, candidate scores are coherent across refinements of an event if and only if they aggregate by log-sum-exp. On 231,521 credit card complaints from the Consumer Financial Protection Bureau, where the decision is whether a complaint ends in monetary relief, a student trained on a logistic teacher's probabilities ends at the teacher's decision cost while a student trained on outcomes goes 8% below it, a 30B model read zero-shot remains worse than the teacher after recalibration, and that model departs from the coherence condition by 17.5 decibans. Pretrained representations reduce the labeled data required and calibration corrects the scale of the probabilities, but neither corrects a biased teacher, so the probabilities have to be checked against realized outcomes.

Reliable uncertainty estimation is critical for medical image segmentation, where automated contours feed downstream quantification and clinical decision support. Many strong uncertainty methods require repeated inference, while efficient single-forward-pass alternatives often provide weaker failure ranking or rely on restrictive feature-space assumptions. We present SegWithU, a post-hoc framework that augments a frozen pretrained segmentation backbone with a lightweight uncertainty head. SegWithU taps intermediate backbone features and models uncertainty as perturbation energy in a compact probe space using rank-1 posterior probes. It produces two voxel-wise uncertainty maps: a calibration-oriented map for probability tempering and a ranking-oriented map for error detection and selective prediction. Across ACDC, BraTS2024, and LiTS, SegWithU is the strongest and most consistent single-forward-pass baseline, achieving AUROC/AURC of 0.9838/2.4885, 0.9946/0.2660, and 0.9925/0.8193, respectively, while preserving segmentation quality. These results suggest that perturbation-based uncertainty modeling is an effective and practical route to reliability-aware medical segmentation. Source code is available at https://github.com/ProjectNeura/SegWithU.

Large language models (LLMs) often encode word-form variation (e.g., walk vs. walked) as linear directions in the embedding space. However, standard tokenization algorithms treat such variants as distinct words with different vocabulary entries, quickly filling the size-capped token vocabulary with surface-form variation (e.g., walk, walking, Walk) at the expense of diversity and multilingual coverage. We show that many of these variations can be captured by transformation vectors: additive offsets that yield the appropriate word representation when applied to a base form embedding, in both the input and output spaces. Building on this, we propose a compact reshaping of the vocabulary: instead of assigning unique tokens to each surface form, we compose them from shared base form and transformation vectors (e.g., walked is walk+past tense). Our approach is lightweight, keeping the pretrained backbone frozen and only training small adaptation modules. We apply it across five languages and multiple LLMs in both pretraining and post-hoc adaptation, freeing 10-40% of vocabulary slots to be reallocated where tokenization is inefficient. Importantly, we do so while also expanding vocabulary coverage to out-of-vocabulary words, and with minimal impact on downstream performance. Our findings motivate a rethinking of vocabulary design, towards a representation that better matches the underlying structure of language and the practical needs of multilingual coverage.

Diffusion-based world models can generate and predict trajectories in high-dimensional dynamical systems, but predictive accuracy does not imply that their latent coordinates recover the underlying state variables or causal interactions. We ask whether a frozen pretrained diffusion model can be equipped with identifiable coordinates without retraining its generative backbone. We show that auxiliary-variable nonlinear ICA guarantees can be transferred to Contrastive Diffusion Alignment (ConDA), which learns only a lightweight alignment map on top of frozen diffusion latents. Under standard TCL/GCL assumptions, the aligned representation identifies latent dynamical states up to permutation and componentwise invertible transformations, preserves the latent dynamic structural causal model, and reduces lagged graph recovery to transition-Jacobian sparsity. We evaluate TCL-, GCL-, and CEBRA-based ConDA against TDRL, CaRiNG, IDOL, temporal SuaVE, and iVAE across physical and robotic video systems. TCL and GCL achieve near-perfect blockwise state recovery and competitive lagged graph recovery, including exact recovery in a simulated falling-body system. In a simulated bipedal robot, learned dynamics recover the sign and temporal structure of responses to held-out control perturbations. These results show that a frozen generative diffusion model can be equipped with coordinates that are identifiable, structurally interpretable, and useful for analyzing intervention-relevant dynamics.

This paper evaluates DINOv3, a recent large-scale self-supervised vision backbone, for visuomotor diffusion policy learning in robotic manipulation. We investigate whether a purely self-supervised encoder can match or surpass conventional supervised ImageNet-pretrained backbones (e.g., ResNet-18) under three regimes: training from scratch, frozen, and finetuned. Across four benchmark tasks (Push-T, Lift, Can, Square) using a unified FiLM-conditioned diffusion policy, we find that (i) finetuned DINOv3 matches or exceeds ResNet-18 on several tasks, (ii) frozen DINOv3 remains competitive, indicating strong transferable priors, and (iii) self-supervised features improve sample efficiency and robustness. These results support self-supervised large visual models as effective, generalizable perceptual front-ends for action diffusion policies, motivating further exploration of scalable label-free pretraining in robotic manipulation. Compared to using ResNet18 as a backbone, our approach with DINOv3 achieves up to a 10% absolute increase in test-time success rates on challenging tasks such as Can, and on-the-par performance in tasks like Lift, PushT, and Square.

Flow-matching methods for 3D shape assembly learn point-wise velocity fields that transport parts toward assembled configurations, yet they receive no explicit guidance about which cross-part interactions should drive the motion. We introduce TORA, a topology-first representation alignment framework that distills relational structure from a frozen pretrained 3D encoder into the flow-matching backbone during training. We first realize this via simple instantiation, token-wise cosine matching, which injects the learned geometric descriptors from the teacher representation. We then extend to employ a Centered Kernel Alignment (CKA) loss to match the similarity structure between student and teacher representations for enhanced topological alignment. Through systematic probing of diverse 3D encoders, we show that geometry- and contact-centric teacher properties, not semantic classification ability, govern alignment effectiveness, and that alignment is most beneficial at later transformer layers where spatial structure naturally emerges. TORA introduces zero inference overhead while yielding two consistent benefits: faster convergence (up to 6.9times) and improved accuracy in-distribution, along with greater robustness under domain shift. Experiments on five benchmarks spanning geometric, semantic, and inter-object assembly demonstrate state-of-the-art performance, with particularly pronounced gains in zero-shot transfer to unseen real-world and synthetic datasets. Project page: https://nahyuklee.github.io/tora.

Telecom language models must combine broad networking knowledge with specialist behavior across routing, broadband services, access technologies, and operational diagnostics while remaining practical to deploy as a single model. We present an end-to-end framework that builds source-grounded synthetic training data from structured networking taxonomies and expert graphs, materializes 212,559 routed training records across fourteen networking routes, trains six frozen specialist LoRA teachers over one shared continued-pretrained backbone, and consolidates their behavior into one deployable student adapter using Routed Specialist On-Policy Distillation (RSOD). In RSOD, the committed student generates each trajectory, the route-assigned specialist teacher-forces the exact native token sequence, compact teacher hidden states are reconstructed through the shared frozen output head, and only the student LoRA is updated. A controlled reconstruction validation shows mean absolute logit error of 7.26 x 10^-6 with 100% top-1 agreement between native and reconstructed teacher logits. On four RTX 6000 Ada GPUs, the completed 2,000-step run produced 16,000 trajectories with zero observed student-version or token- ID mismatches. Under the primary route-conditioned evaluation over 2,850 held-out questions, the raw Meta-Llama-3.1-8B-Instruct model scores 12.8661/25 micro (13.0172/25 macro), the combined routed six-teacher system scores 21.7641/25 micro, and the consolidated RSOD student, released as Llama-CalixCLM v1, reaches 21.7112/25 micro (21.8006/25 macro) on the same five dimension LLM-judge rubric. Under a separate neutral deployment-like prompt, the same student reaches 20.0028/25 micro (20.0778/25 macro). The consolidated student remains within 0.0529 micro-score points of the combined routed-teacher system while retaining a numerically validated and auditable train-serve execution path.

Real-world image super-resolution (SR) increasingly relies on Diffusion Transformer (DiT) backbones, whose internal activations can be dominated by a small number of massive channels. Yet improving perceptual quality in these models still typically requires fine-tuning the network or attaching additional adapters, leaving this structured activation space largely unexplored for adaptation. We investigate whether dominant channels can instead serve as a compact adaptation interface for frozen DiT-based SR models. We first characterize their behavior in pretrained SR backbones and show through controlled interventions that they strongly affect reconstruction quality. Building on this observation, we introduce SPARK, a lightweight input-conditioned controller that predicts bounded per-channel affine transformations for only the selected channels, while keeping the SR backbone and VAE frozen. Dominant channels are identified through an online activation-ranking procedure, and only a small predictor conditioned on the low-resolution VAE latent is optimized. Experiments on three DiT-based SR backbones across DIV2K, RealSR, and DRealSR show consistent gains in both fidelity and perceptual quality while modulating only eight channels per stream and block. Controlled comparisons further show that these gains cannot be explained by parameter budget or access to the selected channels alone.

Vision-Language Models (VLMs) have emerged as a critical and fast-growing extension of Large Language Models (LLMs) that enable multimodal reasoning through both text and image inputs. Although VLMs enrich the capabilities of language models, they also inherit and amplify key computational bottlenecks: the memory overhead caused by the large key-value (KV) cache during autoregressive decoding. This challenge is particularly severe in VLMs, where images produce longer token sequences and denser feature representations compared to text. Moreover, the spatial and information-rich nature of vision tokens introduces structured attention patterns that make many LLM-oriented KV cache compression techniques ineffective when applied directly to VLMs. In this work, we conduct a detailed empirical analysis of the behavior of vision tokens, highlighting the critical differences from purely text-based models. Based on these insights, we propose KVCapsule, a novel KV cache compression framework for vision tokens. KVCapsule keeps the pretrained VLM backbone frozen, requires no modification to the attention computation modules, and can be integrated into existing VLMs through lightweight compression and reconstruction components. We evaluate KVCapsule on multiple VLMs and benchmark tasks, demonstrating up to 2x improvement in TPS and 2.4x reduction in KV cache memory at a 60% compression ratio, with negligible degradation in accuracy or response quality. Our findings offer practical pathways to scale VLM inference under constrained memory budgets and inspire further research into structure-aware cache compression for multimodal models.

This paper studies category-level RGB-D object pose estimation, which recovers an object's 3D rotation and translation without instance-specific CAD models or reference views. This task is highly ambiguous due to intra-class variations, symmetries, and partial observations. Current solutions struggle to balance reliability and efficiency: methods based on intermediate structures are prone to error propagation, while diffusion models suffer from high inference latency and complex post-hoc candidate extraction. To address this, we present F2G-Pose, a real-time direct, single-pass framework that predicts category-level pose, metric size, and camera-frame completed shape from a single RGB-D observation in one feed-forward pass. F2G-Pose lifts dense visual foundation features to partial point clouds, encodes local geometry with DGCNN tokenization, and integrates object-level structure with a Mixture-of-Experts Transformer. Joint size prediction and camera-frame shape completion encourage metric consistency through dense geometric supervision. With its task-specific network trained only on pose-annotated synthetic SOPE data and its frozen RADIO backbone externally pretrained, F2G-Pose achieves state-of-the-art accuracy on SOPE and ROPE while running at 28 FPS for pose-only inference, and further demonstrates strong camera-frame geometry on HouseCat6D and real-object transfer on HANDAL. Analyses of latency, robustness, shape completion, and GenPose++ candidate behavior further demonstrate the efficiency and reliability of F2G-Pose, with real-world manipulation experiments demonstrating deployment potential under segmented RGB-D inputs. The project page, code, and pretrained models are made available at https://jrryzh.github.io/F2G-Pose/.

Cell-level dense prediction is central to computational pathology, but remains challenging due to fine-grained histological structures, strong domain shifts, and costly dense annotations. Existing ViT-based pathology foundation models rely on patch tokenization, which can disrupt spatial continuity and weaken local morphological details needed for cell-level prediction. To address this, we propose Masked-Diffusion Convolutional Foundation Models, termed ConvNeXt Masked-Diffusion (CMD), a self-supervised convolutional generative pretraining framework for dense pathology representation learning. CMD uses a fully convolutional ConvNeXt-UNet backbone, performs masked-diffusion pretraining in pixel space, and incorporates frozen pathology foundation model features through adaptive normalization. Experimental results demonstrate that CMD consistently outperforms existing ViT-based pathology foundation models and even surpasses state-of-the-art end-to-end segmentation methods while fine-tuning only a small number of task-specific parameters across multiple pathology dense prediction tasks. The advantage is particularly pronounced under limited annotation settings, where CMD exhibits stronger robustness and generalization ability. Our findings suggest that purely convolutional architectures can also serve as competitive pathology foundation models for cell-level dense prediction, achieving leading performance within the current ViT-dominated paradigm and providing a scalable, high-performance solution that better preserves histological structural priors for fine-grained pathology understanding.

Remote sensing image segmentation is crucial for environmental monitoring, disaster assessment, and resource management, but its performance largely depends on the quality of the dataset. Although several high-quality datasets are broadly accessible, data scarcity remains for specialized tasks like marine oil spill segmentation. Such tasks still rely on manual annotation, which is both time-consuming and influenced by subjective human factors. The segment anything model 2 (SAM2) has strong potential as an automatic annotation framework but struggles to perform effectively on heterogeneous, low-contrast remote sensing imagery. To address these challenges, we introduce a novel label enhancement and automatic annotation framework, termed SAM2-ELNet (Enhancement and Labeling Network). Specifically, we employ the frozen Hiera backbone from the pretrained SAM2 as the encoder, while fine-tuning the adapter and decoder for different remote sensing tasks. In addition, the proposed framework includes a label quality evaluator for filtering, ensuring the reliability of the generated labels. We design a series of experiments targeting resource-limited remote sensing tasks and evaluate our method on two datasets: the Deep-SAR Oil Spill (SOS) dataset with Synthetic Aperture Radar (SAR) imagery, and the CHN6-CUG Road dataset with Very High Resolution (VHR) optical imagery. The proposed framework can enhance coarse annotations and generate reliable training data under resource-limited conditions. Fine-tuned on only 30% of the training data, it generates automatically labeled data. A model trained solely on these achieves slightly lower performance than using the full original annotations, while greatly reducing labeling costs and offering a practical solution for large-scale remote sensing interpretation.

We propose a sensor-guided adaptive contrastive learning framework for visual representation learning in PointGoal navigation. During training, privileged LiDAR sensing guides the contrastive objective through a geometry-aware similarity metric and adaptive temperature scaling, encouraging visual embeddings to capture navigation-relevant structure rather than scene-specific appearance. The resulting encoder is pretrained independently, frozen, and used as the perceptual backbone for reinforcement learning, decoupling representation learning from policy optimization. We further introduce a cross-stage domain mismatch between representation pretraining and policy learning to suppress environment-specific shortcuts and promote reliance on task-relevant features. Extensive experiments in high-fidelity simulation demonstrate that our approach significantly improves policy-level scene transfer across diverse indoor and outdoor environments. At deployment, the agent relies only on monocular RGB observations together with standard task-related inputs such as goal position and proprioceptive signals, without access to LiDAR or other privileged sensors. Our method outperforms large pretrained vision models and standard contrastive baselines under severe appearance and semantic shifts. We also release a multimodal dataset to support future research on privileged-guided visual representation learning for navigation. The code is available at:

Image super-resolution (SR) with large generative models has recently achieved remarkable perceptual quality, yet maintaining fidelity to the LR observation remains challenging. In particular, we observe that diffusion transformers (DiTs) built on latent representations suffer from a critical limitation: the compression bottleneck of the VAE weakens fine-grained spatial information, leading to hallucinated details that are weakly grounded in the input image. In this work, we revisit generative SR from a representation perspective and propose a pixel-grounded super-resolution (PGSR) framework that preserves LR-observed pixel evidence before VAE compression and reuses it throughout restoration. Instead of relying solely on the compressed latent condition, PGSR extracts pre-VAE pixel evidence from the upsampled LR image and reuses it at two stages. First, Condition-Side Trajectory Guidance fuses LR-derived pixel evidence with the latent LR condition to guide the latent restoration trajectory. Second, Decoder-Side Pixel Grounding injects multi-scale pixel features into the frozen VAE decoder to ground the final rendering with LR-observed cues. To efficiently adapt large pretrained DiT models, we keep the latent autoencoder and main flow-matching backbone frozen, and train only lightweight restoration modules. We further study an efficient local-window attention variant for improved high-resolution efficiency and scalability. Extensive experiments demonstrate that PGSR improves the realism--fidelity trade-off and produces more faithful, visually convincing results than existing latent generative SR approaches.

Radiological analysis increasingly benefits from pretrained visual representations that can support heterogeneous downstream tasks across imaging modalities. In this work, we introduce OmniRad, a self-supervised radiological foundation model pretrained on 1.2 million medical images, designed with radiology-inspired principles emphasizing representation reuse and cross-task transferability. We evaluate the pretrained encoder under multiple downstream adaptation regimes, including lightweight task-specific adapters with a frozen backbone as well as full end-to-end fine-tuning for classification, allowing us to assess both representation quality and task-specific performance. OmniRad is evaluated on a broad suite of public benchmarks spanning classification and segmentation across multiple modalities. On the MedMNISTv2 collection, OmniRad improves classification F1 by up to 2.05% over competing foundation models. For dense prediction, OmniRad attains mean Dice score improvements across six MedSegBench datasets when using frozen representations. Qualitative analyses and latent-space visualizations suggest improved feature clustering and modality-related separation.

Consistent 3D geometry estimation from streaming RGB input is crucial for real-world applications such as autonomous driving, embodied AI, and large-scale reconstruction. While modern monocular geometry foundation models achieve strong single-image accuracy, they exhibit severe temporal inconsistency on continuous input, notably dominated by scale--shift drifting. Through targeted empirical analysis, we trace this instability to its root cause: fluctuations in latent feature statistics, whose mean and variance directly determine the predicted depth's scale and shift. Building on this insight, we introduce Dynamic Feature Normalization (DyFN), a lightweight, causal recurrent module that dynamically and robustly modulates feature statistics to maintain stable geometry over time. We adapt powerful pretrained monocular geometry models for streaming by finetuning only DyFN, a mere 2\% additional parameters, while keeping the backbone frozen, thereby achieving temporal consistency without compromising single-image accuracy. Extensive experiments across four benchmarks show that DyFN effectively eliminates temporal artifacts such as disjointed layering and positional jitter, and achieves state-of-the-art temporal stability, improving over prior streaming methods by up to 14\% and even outperforming heavier non-causal video baselines. Project Page: https://shawlyu.github.io/DyFN

Modern stereo matching models fail when disparity crosses zero, with end-point error (EPE) rising by 4.6-37times. Yet stereoscopic content, from cinema 3D to VR, routinely contains objects behind the zero-disparity plane (ZDP), corresponding to negative disparities. The blind spot cascades through datasets, architectures, and evaluation protocols, all of which inherit the non-negative geometry. Rectified parallel cameras place ZDP at infinity, so every finite depth yields d=fB/z ge 0 by construction, and nothing within the standard pipeline can violate, or even measure, a negative disparity. To measure it, we propose ZDPShift, a benchmark of 21{,}495 stereo pairs from seven cinematographer-authored open movies, each frame rendered at five zero-disparity-plane positions with dense signed ground truth. Six state-of-the-art image and video stereo matching models collapse once the plane moves. On identical scene content, FoundationStereo goes from 2.24 px EPE to 75.33px, with every backbone leaving roughly half of all pixels exceeding a three-pixel disparity error. What is missing, however, is not the underlying matching capability. % The capability itself, however, is already present. Training on supervision synthesized from SceneFlow, which adds no new data or parameters, keeps the error flat across the signed range. Training only the decoder, with the pretrained matching features frozen, performs comparably across all six backbones, with EPE jittering within 0.2px. Thus, the pretrained features already extend to the negative regime they were never trained on, and only the output convention discarded it. Meanwhile, positive-regime accuracy on KITTI, Middlebury, ETH3D, and Sintel is largely preserved.

Feed-forward 3D Gaussian Splatting (3DGS) reconstructs a scene in a single forward pass, replacing per-scene optimization with a network trained across many scenes. Its quality, however, degrades sharply as the number of input images drops. The bottleneck is upstream of the reconstruction heads: from a few unposed views, the internal representation they read carries no evidence for unobserved regions, leaving holes, floaters, and blur. The common remedy supplies that evidence as pixels, synthesizing extra views with an image or video generator and re-encoding them, which is costly and not 3D-consistent by construction. We instead densify the evidence itself. We present DensiTok, a plug-in module for pretrained feed-forward 3DGS models that densifies their internal geometry tokens directly, making a frozen backbone behave as though it had observed many more views than it was given. DensiTok compresses those tokens into a compact latent space, completes the latents of the unobserved viewpoints in a single flow-matching step conditioned on camera geometry, and decodes them back into tokens that the original reconstruction heads. The same module design can be integrated into different pretrained predictors while keeping each backbone and its reconstruction heads frozen. Completion in a low-dimensional latent space requires no image synthesis or additional encoder passes. Across three pretrained backbones and two benchmarks, DensiTok consistently improves sparse-view reconstruction and recovers much of the gap to dense-view reconstruction.

Current video-based fall detection research mostly relies on small, staged datasets with significant domain biases concerning background, lighting, and camera setup resulting in unknown real-world performance. We introduce OmniFall, unifying eight public fall detection datasets (roughly 14 h of recordings, roughly 42 h of multiview data, 101 subjects, 29 camera views) under a consistent ten-class taxonomy with standardized evaluation protocols. Our benchmark provides complete video segmentation labels and enables fair cross-dataset comparison previously impossible with incompatible annotation schemes. For real-world evaluation we curate OOPS-Fall from genuine accident videos and establish a staged-to-wild protocol measuring generalization from controlled to uncontrolled environments. Experiments with frozen pre-trained backbones such as I3D or VideoMAE reveal significant performance gaps between in-distribution and in-the-wild scenarios, highlighting critical challenges in developing robust fall detection systems. OmniFall Dataset at https://huggingface.co/datasets/simplexsigil2/omnifall , Code at https://github.com/simplexsigil/omnifall-experiments

We present the Decoupled VIdeo Segmentation (DVIS) framework, a novel approach for the challenging task of universal video segmentation, including video instance segmentation (VIS), video semantic segmentation (VSS), and video panoptic segmentation (VPS). Unlike previous methods that model video segmentation in an end-to-end manner, our approach decouples video segmentation into three cascaded sub-tasks: segmentation, tracking, and refinement. This decoupling design allows for simpler and more effective modeling of the spatio-temporal representations of objects, especially in complex scenes and long videos. Accordingly, we introduce two novel components: the referring tracker and the temporal refiner. These components track objects frame by frame and model spatio-temporal representations based on pre-aligned features. To improve the tracking capability of DVIS, we propose a denoising training strategy and introduce contrastive learning, resulting in a more robust framework named DVIS++. Furthermore, we evaluate DVIS++ in various settings, including open vocabulary and using a frozen pre-trained backbone. By integrating CLIP with DVIS++, we present OV-DVIS++, the first open-vocabulary universal video segmentation framework. We conduct extensive experiments on six mainstream benchmarks, including the VIS, VSS, and VPS datasets. Using a unified architecture, DVIS++ significantly outperforms state-of-the-art specialized methods on these benchmarks in both close- and open-vocabulary settings. Code:~https://github.com/zhang-tao-whu/DVIS_Plus.

Test-time reinforcement learning (TTRL) enables models to improve their reasoning without relying on labeled training data, but existing approaches typically optimize a large fraction of the model parameters. This raises a natural question: can effective test-time adaptation emerge when both the reward signal and the optimization space are severely restricted? We answer this question with label-free bias-only TTRL, which uses majority-vote pseudolabels as rewards and optimizes only ~100K bias parameters while keeping the pretrained backbone frozen. On MATH-500, our approach reaches 76.67% accuracy with Qwen2.5-7B, slightly exceeding our own labeled bias-steering reproduction while optimizing 76,000x fewer parameters than full-parameter TTRL. The same training procedure improves performance across vision-language and audio reasoning tasks, including MathVista, AI2D, LogicVista, and MMAU. We further show that the learned steering vectors transfer to 4,500 held-out MATH problems, indicating that the adaptation is not limited to the problems used during test-time optimization. Finally, we analyze why this highly restricted adaptation can work, showing that majority-vote reliability improves with rollout consensus and that bias subspaces with greater accessible gradient energy exhibit stronger downstream trainability. These results demonstrate that substantial test-time adaptation can emerge from optimizing a tiny bias-only subspace using entirely label-free rewards.

In this report, we release Tabby, a long context probabilistic time series foundation model, together with a complete and open recipe of how it was built. Tabby adopts an encoder-only patch Transformer architecture and concentrates the contributions on the data and the training procedure. The pretraining corpus combines an extended real-world collection, GIFT-Eval-Pretrain+ and BLAST, with synthetic data from KernelSynth and CauKerV2, an online generator that composes temporal dynamics through randomly sampled structural causal models. Training couples a progressive convergence schedule, which yields reusable intermediate checkpoints, with a deep quantile supervision objective for intermediate layers. The resulting 145M parameter backbone supports contexts of up to 8,192 observations and serves forecasting, classification, and anomaly detection, while a prompt-tuning module further improves in-distribution forecasting performance with the pretrained weights frozen. Tabby achieves competitive zero-shot forecasting performance on GIFT-Eval and the out-of-distribution TIME benchmark, while the same pretrained backbone also supports classification on the UCR Archive and zero-shot anomaly detection on TSB-AD-U. We release training pipeline and model as open source at huawei-noah/trustworthyAI.

Adapting large-scale Vision-Language Models (VLMs) like CLIP to downstream tasks often suffers from a "one-size-fits-all" architectural approach, where visual and textual tokens are processed uniformly by wide, generic adapters. We argue that this homogeneity ignores the distinct structural nature of the modalities -- spatial locality in images versus semantic density in text. To address this, we propose HeBA (Heterogeneous Bottleneck Adapter), a unified architectural framework that introduces modality-specific structural inductive biases. HeBA departs from conventional designs through three key architectural innovations: (1) Heterogeneity: It processes visual tokens via 2D depthwise-separable convolutions to preserve spatial correlations, while distinctively processing text tokens via dense linear projections to capture semantic relationships; (2) Bottleneck Regularization: Unlike standard expanding adapters, HeBA employs a compression bottleneck (D -> D/4) that explicitly forces the model to learn compact, robust features and acts as a structural regularizer; and (3) Active Gradient Initialization: We challenge the restrictive zero-initialization paradigm, utilizing a Kaiming initialization strategy that ensures sufficient initial gradient flow to accelerate convergence without compromising the frozen backbone's pre-trained knowledge. Extensive experiments demonstrate that HeBA's architecturally specialized design achieves superior stability and accuracy, establishing a new state-of-the-art on 11 few-shot benchmarks. Code is available at https://github.com/Jahid12012021/VLM-HeBA.

Large language models (LLMs) excel at generating contextually relevant content. However, tailoring these outputs to individual users for effective personalization is a significant challenge. While rich user-specific information often exists as pre-existing user representations, such as embeddings learned from preferences or behaviors, current methods to leverage these for LLM personalization typically require costly fine-tuning or token-heavy prompting. We propose Embedding-to-Prefix (E2P), a parameter-efficient method that injects pre-computed context embeddings into an LLM's hidden representation space through a learned projection to a single soft token prefix. This enables effective personalization while keeping the backbone model frozen and avoiding expensive adaptation techniques. We evaluate E2P across two public datasets and in a production setting: dialogue personalization on Persona-Chat, contextual headline generation on PENS, and large-scale personalization for music and podcast consumption. Results show that E2P preserves contextual signals and achieves strong performance with minimal computational overhead, offering a scalable, efficient solution for contextualizing generative AI systems.

This report presents TAP-JEPA, our runner-up submission to the EPIC-KITCHENS-100 (EK-100) Action Anticipation Challenge at EgoVis 2026. The task is to anticipate the next verb, noun, and verb-noun action from an egocentric clip that ends before the target action begins. Instead of fine-tuning a large video backbone, TAP-JEPA builds a compact anticipation model on frozen V-JEPA 2.1 features: a ViT-G/384 encoder extracts visible pre-action tokens, the pre-trained latent predictor estimates near-future tokens from the observed context, and both token groups are fused by attentive probes with task-specific queries for verbs, nouns, and action pairs. For the final submission, we expand supervised training with the official training split and most of the validation split, reserving a small subset for sanity checks and qualitative inspection, and adopt a two-stage score fusion that first averages eight independently initialized probe replicas within each epoch and then merges candidates from epochs 12-20 with field-dependent weights. On the official open-testing leaderboard, our sunshinesky entry achieves 27.91 percent overall action Mean Top-5 Recall (MT5R), ranking second and only 0.04 percentage points behind the top score.

We present Video Pre-trained Transformer. VPT uses four SOTA encoder models from prior work to convert a video into a sequence of compact embeddings. Our backbone, based on a reference Flan-T5-11B architecture, learns a universal representation of the video that is a non-linear sum of the encoder models. It learns using an autoregressive causal language modeling loss by predicting the words spoken in YouTube videos. Finally, we evaluate on standard downstream benchmarks by training fully connected prediction heads for each task. To the best of our knowledge, this is the first use of multiple frozen SOTA models as encoders in an "embedding -> backbone -> prediction head" design pattern - all others have trained their own joint encoder models. Additionally, we include more modalities than the current SOTA, Merlot Reserve, by adding explicit Scene Graph information. For these two reasons, we believe it could combine the world's best open-source models to achieve SOTA performance. Initial experiments demonstrate the model is learning appropriately, but more experimentation and compute is necessary, and already in progress, to realize our loftier goals. Alongside this work, we build on the YT-20M dataset, reproducing it and adding 25,000 personally selected YouTube videos to its corpus. All code and model checkpoints are open sourced under a standard MIT license.

Discovering novel concepts in unlabelled datasets and in a continuous manner is an important desideratum of lifelong learners. In the literature such problems have been partially addressed under very restricted settings, where novel classes are learned by jointly accessing a related labelled set (e.g., NCD) or by leveraging only a supervisedly pre-trained model (e.g., class-iNCD). In this work we challenge the status quo in class-iNCD and propose a learning paradigm where class discovery occurs continuously and truly unsupervisedly, without needing any related labelled set. In detail, we propose to exploit the richer priors from strong self-supervised pre-trained models (PTM). To this end, we propose simple baselines, composed of a frozen PTM backbone and a learnable linear classifier, that are not only simple to implement but also resilient under longer learning scenarios. We conduct extensive empirical evaluation on a multitude of benchmarks and show the effectiveness of our proposed baselines when compared with sophisticated state-of-the-art methods. The code is open source.

Synthetic data for autonomous driving is surging, powered by diffusion models that promise scalable scene generation. Yet key obstacles remain, as enforcing multi-view and temporal consistency often relies on backbone fine-tuning or added layers, which erodes pre-trained knowledge and weakens text alignment. Models also stay close to the training distribution, struggling under adverse weather and unseen configurations, and fidelity favors frequent over rare classes. We address these gaps with FrozenDrive, a controllable generative framework that preserves a pretrained diffusion models knowledge while achieving strong consistency. FrozenDrive conditions on rich driving-stack signals and text prompts, and introduces knowledge-preserving spatio-temporal attention to impose cross-view alignment and temporal coherence in a single pass within a parameter-free frozen diffusion backbone. An additional object-focused constraint improves per-object fidelity for rare categories. Without any weather- or scene-specific fine-tuning, our model synthesizes globally coherent multi-view driving scenes from text, particularly under adverse and rare conditions, and surpasses prior baselines. On nuScenes, FrozenDrive augmented data significantly improves AD models performance, especially at night and in rain, demonstrating stronger robustness when trained with our scenario-targeted data.

Speech-to-text (S2T) systems for recognition (ASR) and translation (S2TT) typically generate discrete text tokens. In contrast, continuous-target language modelling performs generation in a continuous space, yet its potential for S2T remains unexplored. To bridge this gap, we propose ELF-S2T, an audio-conditioned continuous-target generative model for S2T. Built upon the pre-trained Embedded Language Flows (ELF) backbone, ELF-S2T processes speech via a frozen Whisper encoder and a single linear projector, prepending the resulting audio condition to the noisy text latent for in-context, flow-matching denoising. To prevent the model from over-relying on its pre-trained text context, we introduce audio forcing during training, and further amplify the audio condition via classifier-free guidance at inference. Experiments on LibriSpeech and CoVoST2 show that ELF-S2T achieves competitive ASR and S2TT performance. Crucially, our error analysis reveals that, although ASR and S2TT errors look very different on the surface, both stem from the same underlying cause, a close distance confusion in the continuous latent space. This finding naturally aligns with the continuous representation generation paradigm, indicating a common semantic mapping process beneath recognition and translation. Our code and pretrained models are publicly available at https://github.com/Sslnon/ELF-S2T.

Physically Based Rendering (PBR) materials are typically characterized by multiple 2D texture maps such as basecolor, normal, metallic, and roughness which encode spatially-varying bi-directional reflectance distribution function (SVBRDF) parameters to model surface reflectance properties and microfacet interactions. Upscaling SVBRDF material is valuable for modern 3D graphics applications. However, existing Single Image Super-Resolution (SISR) methods struggle with cross-map inconsistency, inadequate modeling of modality-specific features, and limited generalization due to data distribution shifts. In this work, we propose Multi-modal Upscaling Joint Inference via Cross-map Attention (MUJICA), a flexible adapter that reforms pre-trained Swin-transformer-based SISR models for PBR material super-resolution. MUJICA is seamlessly attached after the pre-trained and frozen SISR backbone. It leverages cross-map attention to fuse features while preserving remarkable reconstruction ability of the pre-trained SISR model. Applied to SISR models such as SwinIR, DRCT, and HMANet, MUJICA improves PSNR, SSIM, and LPIPS scores while preserving cross-map consistency. Experiments demonstrate that MUJICA enables efficient training even with limited resources and delivers state-of-the-art performance on PBR material datasets.

With abundant, unlabeled real faces, how can we learn robust and transferable facial representations to boost generalization across various face security tasks? We make the first attempt and propose FS-VFM, a scalable self-supervised pre-training framework, to learn fundamental representations of real face images. We introduce three learning objectives, namely 3C, that synergize masked image modeling (MIM) and instance discrimination (ID), empowering FS-VFM to encode both local patterns and global semantics of real faces. Specifically, we formulate various facial masking strategies for MIM and devise a simple yet effective CRFR-P masking, which explicitly prompts the model to pursue meaningful intra-region Consistency and challenging inter-region Coherency. We present a reliable self-distillation mechanism that seamlessly couples MIM with ID to establish underlying local-to-global Correspondence. After pre-training, vanilla vision transformers (ViTs) serve as universal Vision Foundation Models for downstream Face Security tasks: cross-dataset deepfake detection, cross-domain face anti-spoofing, and unseen diffusion facial forensics. To efficiently transfer the pre-trained FS-VFM, we further propose FS-Adapter, a lightweight plug-and-play bottleneck atop the frozen backbone with a novel real-anchor contrastive objective. Extensive experiments on 11 public benchmarks demonstrate that our FS-VFM consistently generalizes better than diverse VFMs, spanning natural and facial domains, fully, weakly, and self-supervised paradigms, small, base, and large ViT scales, and even outperforms SOTA task-specific methods, while FS-Adapter offers an excellent efficiency-performance trade-off. The code and models are available on https://fsfm-3c.github.io/fsvfm.html.

We present Diversity-Aware Meta Visual Prompting~(DAM-VP), an efficient and effective prompting method for transferring pre-trained models to downstream tasks with frozen backbone. A challenging issue in visual prompting is that image datasets sometimes have a large data diversity whereas a per-dataset generic prompt can hardly handle the complex distribution shift toward the original pretraining data distribution properly. To address this issue, we propose a dataset Diversity-Aware prompting strategy whose initialization is realized by a Meta-prompt. Specifically, we cluster the downstream dataset into small homogeneity subsets in a diversity-adaptive way, with each subset has its own prompt optimized separately. Such a divide-and-conquer design reduces the optimization difficulty greatly and significantly boosts the prompting performance. Furthermore, all the prompts are initialized with a meta-prompt, which is learned across several datasets. It is a bootstrapped paradigm, with the key observation that the prompting knowledge learned from previous datasets could help the prompt to converge faster and perform better on a new dataset. During inference, we dynamically select a proper prompt for each input, based on the feature distance between the input and each subset. Through extensive experiments, our DAM-VP demonstrates superior efficiency and effectiveness, clearly surpassing previous prompting methods in a series of downstream datasets for different pretraining models. Our code is available at: https://github.com/shikiw/DAM-VP.

Using pre-trained large language models (LLMs) as the backbone for time series prediction has recently gained significant research interest. However, the effectiveness of LLM backbones in this domain remains a topic of debate. Based on thorough empirical analyses, we observe that training and testing LLM-based models on small datasets often leads to the Encoder and Decoder becoming overly adapted to the dataset, thereby obscuring the true predictive capabilities of the LLM backbone. To investigate the genuine potential of LLMs in time series prediction, we introduce three pre-training models with identical architectures but different pre-training strategies. Thereby, large-scale pre-training allows us to create unbiased Encoder and Decoder components tailored to the LLM backbone. Through controlled experiments, we evaluate the zero-shot and few-shot prediction performance of the LLM, offering insights into its capabilities. Extensive experiments reveal that although the LLM backbone demonstrates some promise, its forecasting performance is limited. Our source code is publicly available in the anonymous repository: https://anonymous.4open.science/r/LLM4TS-0B5C.

Neural network based computer vision systems are typically built on a backbone, a pretrained or randomly initialized feature extractor. Several years ago, the default option was an ImageNet-trained convolutional neural network. However, the recent past has seen the emergence of countless backbones pretrained using various algorithms and datasets. While this abundance of choice has led to performance increases for a range of systems, it is difficult for practitioners to make informed decisions about which backbone to choose. Battle of the Backbones (BoB) makes this choice easier by benchmarking a diverse suite of pretrained models, including vision-language models, those trained via self-supervised learning, and the Stable Diffusion backbone, across a diverse set of computer vision tasks ranging from classification to object detection to OOD generalization and more. Furthermore, BoB sheds light on promising directions for the research community to advance computer vision by illuminating strengths and weakness of existing approaches through a comprehensive analysis conducted on more than 1500 training runs. While vision transformers (ViTs) and self-supervised learning (SSL) are increasingly popular, we find that convolutional neural networks pretrained in a supervised fashion on large training sets still perform best on most tasks among the models we consider. Moreover, in apples-to-apples comparisons on the same architectures and similarly sized pretraining datasets, we find that SSL backbones are highly competitive, indicating that future works should perform SSL pretraining with advanced architectures and larger pretraining datasets. We release the raw results of our experiments along with code that allows researchers to put their own backbones through the gauntlet here: https://github.com/hsouri/Battle-of-the-Backbones

Applying a pre-trained large model to downstream tasks is prohibitive under resource-constrained conditions. Recent dominant approaches for addressing efficiency issues involve adding a few learnable parameters to the fixed backbone model. This strategy, however, leads to more challenges in loading large models for downstream fine-tuning with limited resources. In this paper, we propose a novel method for increasing the parameter efficiency of pre-trained models by introducing an intermediate pre-training stage. To this end, we first employ low-rank approximation to compress the original large model and then devise a feature distillation module and a weight perturbation regularization module. These modules are specifically designed to enhance the low-rank model. In particular, we update only the low-rank model while freezing the backbone parameters during pre-training. This allows for direct and efficient utilization of the low-rank model for downstream fine-tuning tasks. The proposed method achieves both efficiencies in terms of required parameters and computation time while maintaining comparable results with minimal modifications to the backbone architecture. Specifically, when applied to three vision-only and one vision-language Transformer models, our approach often demonstrates a merely sim0.6 point decrease in performance while reducing the original parameter size by 1/3 to 2/3.

Continued pretraining offers a promising solution for adapting foundation models to a new target domain. However, in specialized domains, available datasets are often very small, limiting the applicability of SSL methods developed for large-scale pretraining and making hyperparameter search infeasible. In addition, pretrained models are usually released as backbone-weights only, lacking important information to continue pretraining. We propose to bridge this gap with DIET-CP, a simple continued pretraining strategy, where any strong foundation model can be steered towards the new data distribution of interest. DIET-CP relies on a very simple objective, requires no labels, and introduces no more hyperparameters than supervised finetuning. It is stable across data modalities and backbone choices, while providing a significant performance boost for state-of-the-art models such as DINOv3 using only 1000 images.

Large vision--language models (VLMs) often use a frozen vision backbone, whose image features are mapped into a large language model through a lightweight connector. While transformer-based encoders are the standard visual backbone, we ask whether state space model (SSM) vision backbones can be a strong alternative. We systematically evaluate SSM vision backbones for VLMs in a controlled setting. Under matched ImageNet-1K initialization, the SSM backbone achieves the strongest overall performance across both VQA and grounding/localization. We further adapt both SSM and ViT-family backbones with detection or segmentation training and find that dense-task tuning generally improves performance across families; after this adaptation, the SSM backbone remains competitive while operating at a substantially smaller model scale. We further observe that (i) higher ImageNet accuracy or larger backbones do not reliably translate into better VLM performance, and (ii) some visual backbones are unstable in localization. Based on these findings, we propose stabilization strategies that improve robustness for both backbone families and highlight SSM backbones as a strong alternative to transformer-based vision encoders in VLMs.

Large foundation models have emerged in the last years and are pushing performance boundaries for a variety of tasks. Training or even finetuning such models demands vast datasets and computational resources, which are often scarce and costly. Adaptation methods provide a computationally efficient solution to address these limitations by allowing such models to be finetuned on small amounts of data and computing power. This is achieved by appending new trainable modules to frozen backbones with only a fraction of the trainable parameters and fitting only these modules on novel tasks. Recently, the VeRA adapter was shown to excel in parameter-efficient adaptations by utilizing a pair of frozen random low-rank matrices shared across all layers. In this paper, we propose PVeRA, a probabilistic version of the VeRA adapter, which modifies the low-rank matrices of VeRA in a probabilistic manner. This modification naturally allows handling inherent ambiguities in the input and allows for different sampling configurations during training and testing. A comprehensive evaluation was performed on the VTAB-1k benchmark and seven adapters, with PVeRA outperforming VeRA and other adapters. Our code for training models with PVeRA and benchmarking all adapters is available https://github.com/leofillioux/pvera.

Removing an object is not the same as filling its mask. Cast shadows and contact shading usually lie outside the user-provided instance mask M_obj, so a frozen Fill model that edits only that mask leaves the object's photometric footprint on nearby surfaces. Supervised removers learn this joint erasure from paired clean plates. Training-free editors freeze pretrained weights, yet most still treat M_obj as the entire editable support and steer sampling with CLIP or DINO energies that do not predict the occluded scene. We present PredErase, a training-free inference procedure on frozen FLUX.2 and I-JEPA. The method separates where Fill may rewrite pixels from what structure should occupy the hole. A contact-band expansion M_flux of M_obj exposes local residuals on the supporting plane. I-JEPA, pretrained for masked token prediction, supplies a context-conditioned hole target in representation space; sparse projected gradients align decoded Fill completions with that target inside the instance, while coordinates outside the packed support stay locked. Under instance-only masks on RemovalBench, RORD-Val, and DEFACTO-Val, PredErase improves the native FLUX.2 backbone. Supervised removers remain stronger on several full-image appearance metrics; the supported claim is training-free object-and-effect editing of frozen Fill, not replacement of paired-data erasers.

We investigate the capability of a transformer pretrained on natural language to generalize to other modalities with minimal finetuning -- in particular, without finetuning of the self-attention and feedforward layers of the residual blocks. We consider such a model, which we call a Frozen Pretrained Transformer (FPT), and study finetuning it on a variety of sequence classification tasks spanning numerical computation, vision, and protein fold prediction. In contrast to prior works which investigate finetuning on the same modality as the pretraining dataset, we show that pretraining on natural language can improve performance and compute efficiency on non-language downstream tasks. Additionally, we perform an analysis of the architecture, comparing the performance of a random initialized transformer to a random LSTM. Combining the two insights, we find language-pretrained transformers can obtain strong performance on a variety of non-language tasks.

Vision-Language-Action (VLA) policies are typically evaluated as if the user had finished typing or speaking before the robot begins acting. In real deployment, however, users take several seconds to enter a request, leaving the policy idle for a substantial fraction of the interaction. We introduce Premover, a lightweight module that converts this idle window into useful precomputation. Premover keeps the VLA backbone frozen and attaches two small projection heads, one for image patches, one for language tokens, that map an intermediate layer of the backbone into a shared space. The resulting focus map is supervised by simulator-rendered target-object segmentation masks and applied as a per-patch reweighting of the next step's image tokens. A single scalar readiness threshold, trained jointly from streaming prefixes, decides when the policy should begin acting. On the LIBERO benchmark suite, Premover reduces mean wall-clock time from 34.0 to 29.4 seconds, a 13.6% reduction, while matching the full-prompt baseline's success rate (95.1% vs. 95.0%); naive premoving, by contrast, collapses to 66.4%.

Large-scale supervised pretraining is rapidly reshaping 3D medical image segmentation. However, existing efforts focus primarily on increasing dataset size and overlook the question of whether the backbone network is an effective representation learner at scale. In this work, we address this gap by revisiting ConvNeXt-based architectures for volumetric segmentation and introducing MedNeXt-v2, a compound-scaled 3D ConvNeXt that leverages improved micro-architecture and data scaling to deliver state-of-the-art performance. First, we show that routinely used backbones in large-scale pretraining pipelines are often suboptimal. Subsequently, we use comprehensive backbone benchmarking prior to scaling and demonstrate that stronger from scratch performance reliably predicts stronger downstream performance after pretraining. Guided by these findings, we incorporate a 3D Global Response Normalization module and use depth, width, and context scaling to improve our architecture for effective representation learning. We pretrain MedNeXt-v2 on 18k CT volumes and demonstrate state-of-the-art performance when fine-tuning across six challenging CT and MR benchmarks (144 structures), showing consistent gains over seven publicly released pretrained models. Beyond improvements, our benchmarking of these models also reveals that stronger backbones yield better results on similar data, representation scaling disproportionately benefits pathological segmentation, and that modality-specific pretraining offers negligible benefit once full finetuning is applied. In conclusion, our results establish MedNeXt-v2 as a strong backbone for large-scale supervised representation learning in 3D Medical Image Segmentation. Our code and pretrained models are made available with the official nnUNet repository at: https://www.github.com/MIC-DKFZ/nnUNet

Parameter-efficient adaptation of pretrained vision models is commonly performed through linear probes, prompts, low-rank updates, or lightweight residual modules. While effective, these methods usually treat adaptation as a discrete Euclidean perturbation of frozen representations, without explicitly modeling the geometry of the task-induced feature displacement. We propose MC-RFM, a mixed-curvature Riemannian flow-matching framework for few-shot adaptation of frozen visual backbones. The key idea is to represent adapted features on a product manifold combining a hyperbolic factor, which captures hierarchy-sensitive semantic structure, and a Euclidean factor, which preserves locally discriminative visual variation. Adaptation is formulated as a task-conditioned continuous transport from frozen features to support-set prototypes, trained with a flow-matching objective and coupled to a hybrid prototype-linear classifier. The method is lightweight, backbone-agnostic, and operates entirely on cached frozen features. Across seven visual recognition benchmarks, five frozen backbones, and 1/4/16-shot regimes, MC-RFM is the best-performing method in a majority of evaluated settings, with the strongest gains on Transformer backbones and fine-grained datasets. Ablations show that the mixed-curvature head, task conditioning, adaptive branch gating, prototype shrinkage, and discriminative supervision each contribute to performance. These results suggest that few-shot adaptation benefits not only from deciding which parameters to update, but also from modeling how representations should move through a geometry matched to the structure of the downstream task.

Fine-tuning a visual pre-trained model can leverage the semantic information from large-scale pre-training data and mitigate the over-fitting problem on downstream vision tasks with limited training examples. While the problem of catastrophic forgetting in pre-trained backbone has been extensively studied for fine-tuning, its potential bias from the corresponding pre-training task and data, attracts less attention. In this work, we investigate this problem by demonstrating that the obtained classifier after fine-tuning will be close to that induced by the pre-trained model. To reduce the bias in the classifier effectively, we introduce a reference distribution obtained from a fixed text classifier, which can help regularize the learned vision classifier. The proposed method, Text Supervised fine-tuning (TeS), is evaluated with diverse pre-trained vision models including ResNet and ViT, and text encoders including BERT and CLIP, on 11 downstream tasks. The consistent improvement with a clear margin over distinct scenarios confirms the effectiveness of our proposal. Code is available at https://github.com/idstcv/TeS.

Advances in self-supervised learning (SSL) for machine vision have improved representation robustness and model performance, giving rise to pre-trained backbones like ResNet and ViT models tuned with SSL methods such as SimCLR. Due to the computational and data demands of pre-training, the utilization of such backbones becomes a strenuous necessity. However, employing these backbones may inherit vulnerabilities to adversarial attacks. While adversarial robustness has been studied under white-box and black-box settings, the robustness of models tuned on pre-trained backbones remains largely unexplored. Additionally, the role of tuning meta-information in mitigating exploitation risks is unclear. This work systematically evaluates the adversarial robustness of such models across 20,000 combinations of tuning meta-information, including fine-tuning techniques, backbone families, datasets, and attack types. We propose using proxy models to transfer attacks, simulating varying levels of target knowledge by fine-tuning these proxies with diverse configurations. Our findings reveal that proxy-based attacks approach the effectiveness of white-box methods, even with minimal tuning knowledge. We also introduce a naive "backbone attack," leveraging only the backbone to generate adversarial samples, which outperforms black-box attacks and rivals white-box methods, highlighting critical risks in model-sharing practices. Finally, our ablations reveal how increasing tuning meta-information impacts attack transferability, measuring each meta-information combination.

The paradigm of large-scale pre-training followed by downstream fine-tuning has been widely employed in various object detection algorithms. In this paper, we reveal discrepancies in data, model, and task between the pre-training and fine-tuning procedure in existing practices, which implicitly limit the detector's performance, generalization ability, and convergence speed. To this end, we propose AlignDet, a unified pre-training framework that can be adapted to various existing detectors to alleviate the discrepancies. AlignDet decouples the pre-training process into two stages, i.e., image-domain and box-domain pre-training. The image-domain pre-training optimizes the detection backbone to capture holistic visual abstraction, and box-domain pre-training learns instance-level semantics and task-aware concepts to initialize the parts out of the backbone. By incorporating the self-supervised pre-trained backbones, we can pre-train all modules for various detectors in an unsupervised paradigm. As depicted in Figure 1, extensive experiments demonstrate that AlignDet can achieve significant improvements across diverse protocols, such as detection algorithm, model backbone, data setting, and training schedule. For example, AlignDet improves FCOS by 5.3 mAP, RetinaNet by 2.1 mAP, Faster R-CNN by 3.3 mAP, and DETR by 2.3 mAP under fewer epochs.

Pre-trained models have become the preferred backbone due to the expansion of model parameters, with techniques like Parameter-Efficient Fine-Tuning (PEFTs) typically fixing the parameters of these models. However, pre-trained models may not always be optimal, especially when there are discrepancies between training tasks and target tasks, potentially resulting in negative transfer. To address this, we introduce KIND, which performs Knowledge INtegration and Diversion in diffusion models. KIND first integrates knowledge by decomposing parameter matrices of models using U, Sigma, and V matrices, formally inspired by singular value decomposition (SVD). Then it explicitly partitions the components of these matrices into learngenes and tailors to condense common and class-specific knowledge, respectively, through a class gate. In this way, KIND redefines traditional pre-training methods by adjusting training objectives from maximizing model performance on current tasks to condensing transferable common knowledge, leveraging the Learngene framework. We conduct experiments on ImageNet-1K and compare KIND with PEFT and other learngene methods. Results indicate that KIND achieves state-of-the-art performance compared to other PEFT and learngene methods. Specifically, the images generated by KIND achieves more than 6.54 and 1.07 decrease in FID and sFID on DiT-L/2, utilizing only 45.4M trainable parameters and saving at least 35.4G FLOPs in computational cost.

In contrast to numerous NLP and 2D vision foundational models, learning a 3D foundational model poses considerably greater challenges. This is primarily due to the inherent data variability and diversity of downstream tasks. In this paper, we introduce a novel universal 3D pre-training framework designed to facilitate the acquisition of efficient 3D representation, thereby establishing a pathway to 3D foundational models. Considering that informative 3D features should encode rich geometry and appearance cues that can be utilized to render realistic images, we propose to learn 3D representations by differentiable neural rendering. We train a 3D backbone with a devised volumetric neural renderer by comparing the rendered with the real images. Notably, our approach seamlessly integrates the learned 3D encoder into various downstream tasks. These tasks encompass not only high-level challenges such as 3D detection and segmentation but also low-level objectives like 3D reconstruction and image synthesis, spanning both indoor and outdoor scenarios. Besides, we also illustrate the capability of pre-training a 2D backbone using the proposed methodology, surpassing conventional pre-training methods by a large margin. For the first time, PonderV2 achieves state-of-the-art performance on 11 indoor and outdoor benchmarks, implying its effectiveness. Code and models are available at https://github.com/OpenGVLab/PonderV2.

Recent research on time series foundation models has primarily focused on forecasting, leaving it unclear how generalizable their learned representations are. In this study, we examine whether frozen pre-trained forecasting models can provide effective representations for classification. To this end, we compare different representation extraction strategies and introduce two model-agnostic embedding augmentations. Our experiments show that the best forecasting models achieve classification accuracy that matches or even surpasses that of state-of-the-art models pre-trained specifically for classification. Moreover, we observe a positive correlation between forecasting and classification performance. These findings challenge the assumption that task-specific pre-training is necessary, and suggest that learning to forecast may provide a powerful route toward constructing general-purpose time series foundation models.

The use of pretrained backbones with fine-tuning has been successful for 2D vision and natural language processing tasks, showing advantages over task-specific networks. In this work, we introduce a pretrained 3D backbone, called {\SST}, for 3D indoor scene understanding. We design a 3D Swin transformer as our backbone network, which enables efficient self-attention on sparse voxels with linear memory complexity, making the backbone scalable to large models and datasets. We also introduce a generalized contextual relative positional embedding scheme to capture various irregularities of point signals for improved network performance. We pretrained a large {\SST} model on a synthetic Structured3D dataset, which is an order of magnitude larger than the ScanNet dataset. Our model pretrained on the synthetic dataset not only generalizes well to downstream segmentation and detection on real 3D point datasets, but also outperforms state-of-the-art methods on downstream tasks with +2.3 mIoU and +2.2 mIoU on S3DIS Area5 and 6-fold semantic segmentation, +1.8 mIoU on ScanNet segmentation (val), +1.9 mAP@0.5 on ScanNet detection, and +8.1 mAP@0.5 on S3DIS detection. A series of extensive ablation studies further validate the scalability, generality, and superior performance enabled by our approach. The code and models are available at https://github.com/microsoft/Swin3D .

To effectively exploit the potential of large-scale models, various pre-training strategies supported by massive data from different sources are proposed, including supervised pre-training, weakly-supervised pre-training, and self-supervised pre-training. It has been proved that combining multiple pre-training strategies and data from various modalities/sources can greatly boost the training of large-scale models. However, current works adopt a multi-stage pre-training system, where the complex pipeline may increase the uncertainty and instability of the pre-training. It is thus desirable that these strategies can be integrated in a single-stage manner. In this paper, we first propose a general multi-modal mutual information formula as a unified optimization target and demonstrate that all existing approaches are special cases of our framework. Under this unified perspective, we propose an all-in-one single-stage pre-training approach, named Maximizing Multi-modal Mutual Information Pre-training (M3I Pre-training). Our approach achieves better performance than previous pre-training methods on various vision benchmarks, including ImageNet classification, COCO object detection, LVIS long-tailed object detection, and ADE20k semantic segmentation. Notably, we successfully pre-train a billion-level parameter image backbone and achieve state-of-the-art performance on various benchmarks. Code shall be released at https://github.com/OpenGVLab/M3I-Pretraining.

Frozen-backbone transfer with Vision Transformers faces two under-addressed issues: optimization instability when adapters are naively inserted into a fixed feature extractor, and the absence of principled guidance for setting adapter capacity. We introduce AdapterTune, which augments each transformer block with a residual low-rank bottleneck whose up-projection is zero-initialized, guaranteeing that the adapted network starts exactly at the pretrained function and eliminates early-epoch representation drift. On the analytical side, we formalize adapter rank as a capacity budget for approximating downstream task shifts in feature space. The resulting excess-risk decomposition predicts monotonic but diminishing accuracy gains with increasing rank, an ``elbow'' behavior we confirm through controlled sweeps. We evaluate on 9 datasets and 3 backbone scales with multi-seed reporting throughout. On a core 5 dataset transfer suite, AdapterTune improves top-1 accuracy over head-only transfer by +14.9 points on average while training only 0.92 of the parameters required by full fine-tuning, and outperforms full fine-tuning on 10 of 15 dataset-backbone pairs. Across the full benchmark, AdapterTune improves over head-only transfer on every dataset-backbone pair tested. Ablations on rank, placement, and initialization isolate each design choice. The code is available at: https://github.com/salimkhazem/adaptertune

Self-supervised learning (SSL) has advanced visual representation learning, but its value in chest radiography, a high-volume imaging modality with fine-grained findings, remains unclear. Meta's DINOv3 extends earlier SSL models through Gram-anchored self-distillation. Whether these design choices improve transfer learning for chest radiography has not been systematically tested. We benchmarked DINOv3 against DINOv2 and ImageNet initialization across seven datasets (n>814,000). Two representative backbones were evaluated: ViT-B/16 and ConvNeXt-B. Images were analyzed at 224x224, 512x512, and 1024x1024 pixels. We additionally assessed frozen features from a 7B model. The primary outcome was mean AUROC across labels. At 224x224, DINOv3 and DINOv2 achieved comparable performance on adult datasets. Increasing resolution to 512x512 yielded consistent improvements for DINOv3 over both DINOv2 and ImageNet. In contrast, results in pediatric cohort showed no differences across initializations. Across all settings, ConvNeXt-B outperformed ViT-B/16. Models using frozen DINOv3-7B features underperformed relative to fully finetuned 86-89M-parameter backbones, highlighting the importance of domain adaptation. Scaling to 1024x1024 did not further improve accuracy. Resolution-related gains were most evident for boundary-dependent and small focal abnormalities. In chest radiography, higher input resolution is critical for leveraging the benefits of modern self-supervised models. 512x512 pixels represent a practical upper limit where DINOv3-initialized ConvNeXt-B networks provide the strongest performance, while larger inputs offer minimal return on cost. Clinically, these findings support use of finetuned, mid-sized backbones at 512x512 for chest radiograph interpretation, with the greatest gains expected in detecting subtle or boundary-centered lesions relevant to emergency and critical care settings.

Sequential recommendation (SR) models capture continuously observed behavior, but a returning user may have no interactions for months or years. We define this setting as Zero-Observation Reactivation: the user has a pre-gap history, while the platform observes no behavioral signals during a macro-gap Delta t. Under a chronologically aligned Gap-Synthesize Protocol on three Amazon datasets (Video Games, CDs & Vinyl, and Movies & TV), Hit@10 decreases monotonically across the evaluated gap buckets and reaches its lowest level beyond one year. The pattern appears across recurrent, unidirectional, and bidirectional SR backbones. We propose DeltaGate, a lightweight output-layer plugin that keeps the backbone frozen and routes each representation dimension between the personalized history and a learned, zero-initialized global prior. The gate is conditioned jointly on Delta t and the personalized representation. In a controlled diagnostic, we hold the personalized representation fixed and vary Delta t to isolate the trained gate's response to the gap input. In the >365d Video Games bucket, DG-SASRec reaches 0.047 Hit@10 versus 0.031 for SASRec, while DG-BERT4Rec reaches 0.046 versus 0.025 for BERT4Rec, with 66K trainable parameters (2--4% overhead). End-to-end retraining attains higher absolute accuracy but changes the backbone embeddings; the frozen plugin preserves zero backbone drift, uses about 40x fewer trainable parameters, and retains observable dimension-wise routing. The source code is available at https://github.com/jdding/DeltaGate.

Pretrained transformers use little of their depth to follow references in context. Thirteen base models reliably follow only 1.4-3.6 lines, and extra pretrained loops add little. A task-trained rank-8 LoRA at one early layer extends this computation with all model weights frozen. Qwen3-8B improves from 15.5% to 99% exact accuracy on 24-line chains; a longer-trained LoRA reaches 50 lines. Ouro-1.4B reaches 60 lines after four loops and at least 160 after eight. The LoRA starts a relay: program lines pass on their chain identity through a short range of middle layers. Frozen heads read progressively further up the chain, and removing parent-line attention stops the relay. A frozen-model measurement locates the last useful intervention layer within tolerance in three of four held-out models. Task-specific LoRAs also improve MuSiQue. Default answers therefore understate the computation accessible through a tiny edit. Code and an interactive demo are available at https://lunamos.github.io/stop-thinking-too-early/

Automated radiology report generation from 3D computed tomography (CT) volumes is challenging due to extreme sequence lengths, severe class imbalance, and the tendency of large language models (LLMs) to ignore visual tokens in favor of linguistic priors. We present Ker-VLJEPA-3B, a four-phase curriculum learning framework for free-text report generation from thoracic CT volumes. A phased training curriculum progressively adapts a Llama 3.2 3B decoder to ground its output in visual features from a frozen, self-supervised encoder. Our visual backbone (LeJEPA ViT-Large) is trained via self-supervised joint-embedding prediction on unlabeled CTs, without text supervision. Unlike contrastive models (CLIP, BiomedCLIP), this language-free backbone yields modality-pure representations. Vision-language alignment is deferred to the curriculum's bridge and generation phases. This modality-agnostic design can integrate any self-supervised encoder into an LLM without paired text during foundation training. Methodological innovations include: (1) zone-constrained cross-attention compressing slice embeddings into 32 spatially-grounded visual tokens; (2) PCA whitening of anisotropic LLM embeddings; (3) a positive-findings-only strategy eliminating posterior collapse; (4) warm bridge initialization transferring projection weights; and (5) selective cross-attention freezing with elastic weight consolidation to prevent catastrophic forgetting. Evaluated on the CT-RATE benchmark (2,984 validation volumes, 18 classes), Ker-VLJEPA-3B achieves a macro F1 of 0.429, surpassing the state-of-the-art (U-VLM, macro F1 = 0.414) by 3.6%, and reaching 0.448 (+8.2%) with threshold optimization. Ablation studies confirm 56.6% of generation quality derives from patient-specific visual content. Code and weights are available.

Can heterogeneous physical degradation systems benefit from joint pretraining and move beyond system-specific prognostics toward reusable cross-system representation learning? CORD combines type-specific observation interfaces with a shared degradation backbone. Its two self-supervised objectives learn at complementary scales: Intra-Observation Structure Modeling (ISM) captures structure within observations, while Inter-Observation Dynamics Modeling (IDM) captures latent degradation evolution across observation histories. We evaluate CORD under two transfer boundaries: Pretraining-Included System Types, where downstream datasets and held-out units are unseen but their system types are represented during source pretraining, and Pretraining-Excluded System Types, where the entire turbofan-engine type is absent from pretraining. Across bearings, batteries, and cutting tools, CORD (Multi-domain) consistently improves over CORD (Single-domain) under Frozen adaptation, provides further gains under Full FT in most settings, and remains competitive with representative external baselines. Source-pretrained initialization also improves low-label adaptation to the pretraining-excluded engine type. Frozen-representation analysis further shows improved cross-unit lifecycle consistency after multi-domain pretraining. Joint pretraining across heterogeneous physical systems thus produces degradation representations reusable across devices, datasets, and system types.

Recent vision foundation models can extract universal representations and show impressive abilities in various tasks. However, their application on object detection is largely overlooked, especially without fine-tuning them. In this work, we show that frozen foundation models can be a versatile feature enhancer, even though they are not pre-trained for object detection. Specifically, we explore directly transferring the high-level image understanding of foundation models to detectors in the following two ways. First, the class token in foundation models provides an in-depth understanding of the complex scene, which facilitates decoding object queries in the detector's decoder by providing a compact context. Additionally, the patch tokens in foundation models can enrich the features in the detector's encoder by providing semantic details. Utilizing frozen foundation models as plug-and-play modules rather than the commonly used backbone can significantly enhance the detector's performance while preventing the problems caused by the architecture discrepancy between the detector's backbone and the foundation model. With such a novel paradigm, we boost the SOTA query-based detector DINO from 49.0% AP to 51.9% AP (+2.9% AP) and further to 53.8% AP (+4.8% AP) by integrating one or two foundation models respectively, on the COCO validation set after training for 12 epochs with R50 as the detector's backbone.

Agentic language model systems alternate between two structurally distinct step types: structured tool calls (short, deterministic, low perplexity) and open-ended planning/reasoning steps (long, complex, high perplexity). Despite this heterogeneity, current inference systems apply identical compute to every step. We introduce LayerRoute, a lightweight adapter that learns to selectively skip transformer blocks on a per-input basis. LayerRoute augments each of the 24 transformer blocks in Qwen2.5-0.5B-Instruct with: (1) a per-layer router (~897 parameters, Linear(896,1)) that outputs a hard binary gate via the straight-through estimator, and (2) LoRA adapters (rank 8, ~1.08M parameters) on the Q/K/V/O attention projections. The backbone weights remain frozen. A single end-to-end training pass on agentic data (Hermes, Glaive, GSM8K, Turing) with a gate regularisation term forces the system to discover which blocks are skippable per input type. After 3,000 steps (6.4 minutes on an A100 40GB), LayerRoute achieves a 12.91% skip differential: tool calls skip 15.25% of FLOPs while planning steps skip only 2.34%, using only 1.10M trainable parameters (0.22% of the 494M backbone). Quality improves over the base model due to LoRA adaptation, with perplexity delta of -1.29 on tool calls and -1.30 on planning.

AI-generated videos (AIGVs) typically contain subtle temporal artifacts that arise from inter-frame inconsistencies rather than within individual frames. A detector that captures such artifacts should therefore benefit from video pretrained backbones over image only ones. In practice, however, video backbones with standard global readouts often fail to outperform strong image pretrained probes on AIGV benchmarks. We attribute this gap to excessive spatiotemporal aggregation in the readout. Video pretrained backbones tend to compress each frame into a single global descriptor. This compression suppresses local patch level temporal dynamics and discards inter patch relations, which are precisely the cues that AIGV detection most reliably depends on. Based on this, we propose Velocity Gated Patch Velocity Profiling (V-PVP), a lightweight readout that replaces only the aggregation layer with two parallel streams over the patch velocity field, adding only about 0.5M trainable parameters. V-PVP serves as a general plug-and-play module that consistently improves performance across diverse video backbones under both end-to-end fine-tuning and linear probing settings. Our method reaches 95.28 AUC on AIGVDBench while keeping the backbone fully frozen. The results show that simply replacing the aggregation layer reactivates the temporal potential of frozen video backbones, restoring their advantage on AIGV detection. Code is available at https://anonymous.4open.science/r/PVP-81B3/.

Large language models (LLMs) and vision-language models (VLMs) are usually frozen after deployment, so they do not learn from the cases they solve. This is especially concerning in medicine, where new clinical evidence, updated guidelines, and new therapies can change established practice. Fine-tuning can update the model, but it requires access to model weights and additional training. Parameter-free methods avoid training, but they may overfit a fixed validation set, lack reliable domain knowledge, or lose visual details by saving experience only as text. To address these limitations, we present a model-agnostic framework that allows frozen LLMs and VLMs to learn from deployment experience through three forms of external expertise: a Skill that guides reasoning and tool use, a Knowledge Memory that stores reliable facts supported by earlier cases or trusted external evidence, and a Multimodal Knowledge Base that keeps visual examples and guides the model to relate each retrieved case to the current image. Instead of relying on a fixed validation set, a validation strategy keeps an update only if it helps on new cases without degrading performance on earlier ones. Across six benchmarks covering clinical diagnosis, clinical workflows, medical reasoning, and medical and non-medical visual reasoning, and with four open-weight and closed-source base models, our framework improves performance during online deployment by up to 34.2% over the base model on medical tasks, generalizes to unseen cases, transfers to other models without further optimization, and works in non-medical domains.

Radiology foundation models learn transferable representations that can be adapted to new tasks by training only small layers on top of a frozen encoder. Dense prediction tasks such as 3D segmentation are, however, underrepresented in their evaluation, and, with the encoder kept frozen, pre-trained models still fall short of nnU-Net, the state-of-the-art reference trained from scratch. To close this gap we extend convolutional MAE pre-training with a robust reconstruction objective, a feature regularizer, and a local-global similarity objective. Using this method, we propose Curia-MAE, a multi-modal, multi-anatomy MAE model pre-trained on 300,000 CT and MRI images covering a large number of anatomical sites. On eight anatomy- and lesion-focused segmentation benchmarks, Curia-MAE improves frozen-encoder performance over a strong MAE baseline, while remaining competitive under full finetuning and superior on lesion tasks, where labeled data is scarce. These results indicate that a single frozen encoder can be reused across diverse segmentation tasks, reducing the cost of adapting and deploying such models in clinical workflows. Curia-MAE pre-trained model weights are made publicly available at https://huggingface.co/raidium/Curia-MAE.

We present a novel Parameter-Efficient Fine-Tuning (PEFT) method, dubbed as Adaptive Freezing of Low Rank Adaptation (AFLoRA). Specifically, for each pre-trained frozen weight tensor, we add a parallel path of trainable low-rank matrices, namely a down-projection and an up-projection matrix, each of which is followed by a feature transformation vector. Based on a novel freezing score, we the incrementally freeze these projection matrices during fine-tuning to reduce the computation and alleviate over-fitting. Our experimental results demonstrate that we can achieve state-of-the-art performance with an average improvement of up to 0.85% as evaluated on GLUE benchmark while yeilding up to 9.5times fewer average trainable parameters. While compared in terms of runtime, AFLoRA can yield up to 1.86times improvement as opposed to similar PEFT alternatives. Besides the practical utility of our approach, we provide insights on the trainability requirements of LoRA paths at different modules and the freezing schedule for the different projection matrices. Code will be released.

Vision-language models encode continuous geometry that their text pathway fails to express: a 6,000-parameter linear probe extracts hand joint angles at 6.1 degrees MAE from frozen features, while the best text output achieves only 20.0 degrees -- a 3.3x bottleneck. LoRA fine-tuning (r=16, 2,000 images) narrows this gap to 6.5 degrees, providing evidence for a pathway-training deficit rather than a representational one. Training objective determines accuracy more than architecture: five encoders spanning self-supervised, contrastive, and hybrid paradigms converge to statistically equivalent accuracy (R^2 approximately 0.55, TOST-equivalent at delta=0.03) despite sharing as little as CKA=0.41 representational similarity -- functional convergence without representational convergence. Autoregressive generation damages geometric fidelity, but the damage originates in the generation process, not in language alignment: Qwen2.5-VL's LLM layers actually improve probe accuracy over its raw vision encoder. Layer-wise analysis reveals a universal mid-network accuracy peak across all architectures, with attention heads in layers 18-22 carrying disproportionate geometric signal. These findings enable a single frozen backbone to function as a multi-task geometric sensor through lightweight probes, without fine-tuning or text generation.

Modern top-performing object detectors depend heavily on backbone networks, whose advances bring consistent performance gains through exploring more effective network structures. In this paper, we propose a novel and flexible backbone framework, namely CBNetV2, to construct high-performance detectors using existing open-sourced pre-trained backbones under the pre-training fine-tuning paradigm. In particular, CBNetV2 architecture groups multiple identical backbones, which are connected through composite connections. Specifically, it integrates the high- and low-level features of multiple backbone networks and gradually expands the receptive field to more efficiently perform object detection. We also propose a better training strategy with assistant supervision for CBNet-based detectors. Without additional pre-training of the composite backbone, CBNetV2 can be adapted to various backbones (CNN-based vs. Transformer-based) and head designs of most mainstream detectors (one-stage vs. two-stage, anchor-based vs. anchor-free-based). Experiments provide strong evidence that, compared with simply increasing the depth and width of the network, CBNetV2 introduces a more efficient, effective, and resource-friendly way to build high-performance backbone networks. Particularly, our Dual-Swin-L achieves 59.4% box AP and 51.6% mask AP on COCO test-dev under the single-model and single-scale testing protocol, which is significantly better than the state-of-the-art result (57.7% box AP and 50.2% mask AP) achieved by Swin-L, while the training schedule is reduced by 6times. With multi-scale testing, we push the current best single model result to a new record of 60.1% box AP and 52.3% mask AP without using extra training data. Code is available at https://github.com/VDIGPKU/CBNetV2.

Current popular backbones in computer vision, such as Vision Transformers (ViT) and ResNets are trained to perceive the world from 2D images. However, to more effectively understand 3D structural priors in 2D backbones, we propose Mask3D to leverage existing large-scale RGB-D data in a self-supervised pre-training to embed these 3D priors into 2D learned feature representations. In contrast to traditional 3D contrastive learning paradigms requiring 3D reconstructions or multi-view correspondences, our approach is simple: we formulate a pre-text reconstruction task by masking RGB and depth patches in individual RGB-D frames. We demonstrate the Mask3D is particularly effective in embedding 3D priors into the powerful 2D ViT backbone, enabling improved representation learning for various scene understanding tasks, such as semantic segmentation, instance segmentation and object detection. Experiments show that Mask3D notably outperforms existing self-supervised 3D pre-training approaches on ScanNet, NYUv2, and Cityscapes image understanding tasks, with an improvement of +6.5% mIoU against the state-of-the-art Pri3D on ScanNet image semantic segmentation.

Existing foundation models (FMs) in the medical domain often require extensive fine-tuning or rely on training resource-intensive decoders, while many existing encoders are pretrained with objectives biased toward specific tasks. This illustrates a need for a strong, task-agnostic foundation model that requires minimal fine-tuning beyond feature extraction. In this work, we introduce a suite of task-agnostic pretraining of CT foundation models (TAP-CT): a simple yet effective adaptation of Vision Transformers (ViTs) and DINOv2 for volumetric data, enabling scalable self-supervised pretraining directly on 3D CT volumes. Our approach incorporates targeted modifications to patch embeddings, positional encodings, and volumetric augmentations, making the architecture depth-aware while preserving the simplicity of the underlying architectures. We show that large-scale 3D pretraining on an extensive in-house CT dataset (105K volumes) yields stable, robust frozen representations that generalize strongly across downstream tasks. To promote transparency and reproducibility, and to establish a powerful, low-resource baseline for future research in medical imaging, we will release all pretrained models, experimental configurations, and downstream benchmark code at https://huggingface.co/fomofo/tap-ct-b-3d.

Pruning generates sparse networks by setting parameters to zero. In this work we improve one-shot pruning methods, applied before training, without adding any additional storage costs while preserving the sparse gradient computations. The main difference to pruning is that we do not sparsify the network's weights but learn just a few key parameters and keep the other ones fixed at their random initialized value. This mechanism is called freezing the parameters. Those frozen weights can be stored efficiently with a single 32bit random seed number. The parameters to be frozen are determined one-shot by a single for- and backward pass applied before training starts. We call the introduced method FreezeNet. In our experiments we show that FreezeNets achieve good results, especially for extreme freezing rates. Freezing weights preserves the gradient flow throughout the network and consequently, FreezeNets train better and have an increased capacity compared to their pruned counterparts. On the classification tasks MNIST and CIFAR-10/100 we outperform SNIP, in this setting the best reported one-shot pruning method, applied before training. On MNIST, FreezeNet achieves 99.2% performance of the baseline LeNet-5-Caffe architecture, while compressing the number of trained and stored parameters by a factor of x 157.

Self-supervised image backbones can be used to address complex 2D tasks (e.g., semantic segmentation, object discovery) very efficiently and with little or no downstream supervision. Ideally, 3D backbones for lidar should be able to inherit these properties after distillation of these powerful 2D features. The most recent methods for image-to-lidar distillation on autonomous driving data show promising results, obtained thanks to distillation methods that keep improving. Yet, we still notice a large performance gap when measuring the quality of distilled and fully supervised features by linear probing. In this work, instead of focusing only on the distillation method, we study the effect of three pillars for distillation: the 3D backbone, the pretrained 2D backbones, and the pretraining dataset. In particular, thanks to our scalable distillation method named ScaLR, we show that scaling the 2D and 3D backbones and pretraining on diverse datasets leads to a substantial improvement of the feature quality. This allows us to significantly reduce the gap between the quality of distilled and fully-supervised 3D features, and to improve the robustness of the pretrained backbones to domain gaps and perturbations.

A typed decision maps evidence, a question and a fixed set of options to a probability for every option, computed in one forward pass, by reading a language model's logits or a small head over its hidden states, instead of generating and parsing text. The commercial system Jev popularised this System~1 interface, and open reproductions have followed. We report two uses of the pattern. Part I describes an in-house System~1 judge that triages about 148K agentic coding session records for a training corpus. It replaces a frontier LLM judge that cost on the order of \1,000 per pass and whose stored labels matched a fresh two-judge consensus on only 26.9% of the sessions where the two judges agreed; a self-hosted frozen backbone with a rank-16 LoRA adapter and a pointer head answers three typed questions in one forward pass, judges 1,000 sessions in about three minutes of one GPU, about 0.06 at a reference rate and roughly 1\% of the frontier judge's cost, and keeps every session inside the organisation. Part II asks whether a readout that adds no parameters can be competitive and whether training one helps. Applying the public Eikos recipe and corpus of about 25K decisions to three further backbones (1B, 2B and 35B), we read the frozen output layer of a LoRA-adapted decoder. On the 111 public hard items of JevBench our single-seed 35B, developed with those items in view, scores 79.3\%, not significantly different from the commercial reference (73.0\%, unadjusted p=0.12) and ahead of five open systems after Holm--Bonferroni correction; our 2B is ahead of all four kev checkpoints on the leaderboard. A single-seed ablation finds no detectable benefit from training the 26 letter rows of the output layer, and a retrain on a later corpus release moves the 2B's hard-tier accuracy by 11.7 points, which shows how little small evaluations resolve.

Limited labeled data makes it hard to train models from scratch in medical domain, and an important paradigm is pre-training and then fine-tuning. Large pre-trained models contain rich representations, which can be adapted to downstream medical tasks. However, existing methods either tune all the parameters or the task-specific layers of the pre-trained models, ignoring the input variations of medical images, and thus they are not efficient or effective. In this work, we aim to study parameter-efficient fine-tuning (PEFT) for medical image analysis, and propose a dynamic visual prompt tuning method, named DVPT. It can extract knowledge beneficial to downstream tasks from large models with a few trainable parameters. Firstly, the frozen features are transformed by an lightweight bottleneck layer to learn the domain-specific distribution of downstream medical tasks, and then a few learnable visual prompts are used as dynamic queries and then conduct cross-attention with the transformed features, attempting to acquire sample-specific knowledge that are suitable for each sample. Finally, the features are projected to original feature dimension and aggregated with the frozen features. This DVPT module can be shared between different Transformer layers, further reducing the trainable parameters. To validate DVPT, we conduct extensive experiments with different pre-trained models on medical classification and segmentation tasks. We find such PEFT method can not only efficiently adapt the pre-trained models to the medical domain, but also brings data efficiency with partial labeled data. For example, with 0.5\% extra trainable parameters, our method not only outperforms state-of-the-art PEFT methods, even surpasses the full fine-tuning by more than 2.20\% Kappa score on medical classification task. It can saves up to 60\% labeled data and 99\% storage cost of ViT-B/16.

Strong speech-to-text (S2T) LLMs already provide robust speech perception and text reasoning, but adding speech-to-speech (S2S) output is challenging: fine-tuning the backbone can degrade the original S2T performance, while attaching a downstream talker reintroduces a serial text-to-speech bottleneck. We present PRIME-Speech, a frozen-backbone S2S conversion framework that trains only speech-generation modules. PRIME-Speech synchronizes a causal audio post-decoder with intermediate hidden states of the frozen backbone, so codec tokens are generated from the model's evolving reasoning trajectory rather than from completed text chunks. The post-decoder uses mixed hidden-state, text, and audio-history conditioning, and a training-time packing strategy with turn-level audio KV-cache and position reset stabilizes multi-turn spoken interaction without additional multi-turn S2S training data. Multi-token prediction further reduces the effective codec prediction rate and improves first-audio latency without modifying the reasoning path. Across speech translation, spoken QA, speech understanding, and multi-turn dialogue, PRIME-Speech preserves the S2T behavior of the frozen backbone while producing accurate, low-WER spoken responses.

We study a constrained training regime for decoder-only Transformers in which the token interface is fixed, previously trained dense blocks are not reopened, and the active trainable parameter set is kept approximately constant as depth grows. Starting from a shallow model, we stack new blocks and train only the newest blocks and the LM head; optional LoRA phases provide limited global readjustment under the same active-parameter budget. The paper asks a feasibility/tradeoff question, not whether this regime matches tuned monolithic pretraining. In a common-protocol 9-layer study on a frozen Unicode substrate, the constructive frozen-Unicode model uses 105.0M active trainable parameters, compared with 180.5M for the interface-matched monolithic frozen baseline and 247.6M for the fully trainable monolithic baseline. We then consider an extreme fixed interface: each token is represented only by a frozen 16-dim binary token-ID code, deterministically lifted to d_model, so the resulting token embedding matrix has rank at most 16. Even in this setting, continued growth remains viable. In a 68.9B-token run on FineWeb-Edu + Cosmopedia, a 16-layer 269.7M model trained above this fixed interface reaches 28.92\% MMLU after an interleaved LoRA stage. Reported final metrics are measured after merging the last-stage LoRA adapters into the 269.7M base model. Because the data mixture changes across stages in this long-horizon run, we interpret it as a viability demonstration rather than a clean causal comparison. Overall, the evidence supports a narrow claim: useful continued learning can proceed above a frozen minimal interface under a bounded active trainable-parameter budget, with a clear tradeoff against dense monolithic training in final perplexity.

Executing multiple tasks simultaneously in medical image analysis, including segmentation, classification, detection, and regression, often introduces significant challenges regarding model generalizability and the optimization of shared feature representations. While Vision Foundation Models (VFMs) provide powerful general representations, full fine-tuning on limited medical data is prone to overfitting and incurs high computational costs. Moreover, existing parameter-efficient fine-tuning approaches typically adopt task-agnostic adaptation protocols, overlooking both task-specific mechanisms and the varying sensitivity of model layers during fine-tuning. In this work, we propose Task-Aware Prompting and Selective Layer Fine-Tuning (TAP-SLF), a unified framework for multi-task ultrasound image analysis. TAP-SLF incorporates task-aware soft prompts to encode task-specific priors into the input token sequence and applies LoRA to selected specific top layers of the encoder. This strategy updates only a small fraction of the VFM parameters while keeping the pre-trained backbone frozen. By combining task-aware prompts with selective high-layer fine-tuning, TAP-SLF enables efficient VFM adaptation to diverse medical tasks within a shared backbone. Results on the FMC_UIA 2026 Challenge test set, where TAP-SLF wins fifth place, combined with evaluations on the officially released training dataset using an 8:2 train-test split, demonstrate that task-aware prompting and selective layer tuning are effective strategies for efficient VFM adaptation.

Vision Transformer (ViT) models have recently emerged as powerful and versatile models for various visual tasks. Recently, a work called PMF has achieved promising results in few-shot image classification by utilizing pre-trained vision transformer models. However, PMF employs full fine-tuning for learning the downstream tasks, leading to significant overfitting and storage issues, especially in the remote sensing domain. In order to tackle these issues, we turn to the recently proposed parameter-efficient tuning methods, such as VPT, which updates only the newly added prompt parameters while keeping the pre-trained backbone frozen. Inspired by VPT, we propose the Meta Visual Prompt Tuning (MVP) method. Specifically, we integrate the VPT method into the meta-learning framework and tailor it to the remote sensing domain, resulting in an efficient framework for Few-Shot Remote Sensing Scene Classification (FS-RSSC). Furthermore, we introduce a novel data augmentation strategy based on patch embedding recombination to enhance the representation and diversity of scenes for classification purposes. Experiment results on the FS-RSSC benchmark demonstrate the superior performance of the proposed MVP over existing methods in various settings, such as various-way-various-shot, various-way-one-shot, and cross-domain adaptation.

Continual pre-training (CPT) has been an important approach for adapting language models to specific domains or tasks. To make the CPT approach more traceable, this paper presents a technical report for continually pre-training Llama-3 (8B), which significantly enhances the Chinese language ability and scientific reasoning ability of the backbone model. To enhance the new abilities while retaining the original abilities, we design specific data mixture and curriculum strategies by utilizing existing datasets and synthesizing high-quality datasets. Specifically, we synthesize multidisciplinary scientific question and answer (QA) pairs based on related web pages, and subsequently incorporate these synthetic data to improve the scientific reasoning ability of Llama-3. We refer to the model after CPT as Llama-3-SynE (Synthetic data Enhanced Llama-3). We also present the tuning experiments with a relatively small model -- TinyLlama, and employ the derived findings to train the backbone model. Extensive experiments on a number of evaluation benchmarks show that our approach can largely improve the performance of the backbone models, including both the general abilities (+8.81 on C-Eval and +6.31 on CMMLU) and the scientific reasoning abilities (+12.00 on MATH and +4.13 on SciEval), without hurting the original capacities. Our model, data, and codes are available at https://github.com/RUC-GSAI/Llama-3-SynE.

Parameter-efficient fine-tuning (PEFT) methods such as adapt large pretrained models by adding small weight-space updates. While effective, weight deltas are hard to interpret mechanistically, and they do not directly expose which internal computations are reused versus bypassed for a new task. We explore an alternative view inspired by neuromodulation: adaptation as a change in mode -- selecting and rescaling existing computations -- rather than rewriting the underlying weights. We propose , a simple activation-space PEFT technique that freezes base weights and learns per-neuron thresholds and gains. During training, a smooth gate decides whether a neuron's activation participates; at inference the gate can be hardened to yield explicit conditional computation and neuron-level attributions. As a proof of concept, we study ``mode specialization'' on MNIST (0^circ) versus rotated MNIST (45^circ). We pretrain a small MLP on a 50/50 mixture (foundation), freeze its weights, and then specialize to the rotated mode using . Across seeds, improves rotated accuracy over the frozen baseline while using only a few hundred trainable parameters per layer, and exhibits partial activation sparsity (a minority of units strongly active). Compared to , trades some accuracy for substantially fewer trainable parameters and a more interpretable ``which-neurons-fire'' mechanism. We discuss limitations, including reduced expressivity when the frozen base lacks features needed for the target mode.

Test-time adaptation (TTA) typically assumes that model parameters can be updated at inference time. This assumption is restrictive for inference-only accelerators, frozen or third-party models, and memory-constrained deployments, and standard BatchNorm-based TTA configurations may also become inactive on architectures without BatchNorm. We study adaptation when the learned model must remain frozen. We introduce CASTER, a gradient-free method that stores source class statistics in a discriminative subspace, estimates a class-shared affine transformation from target-batch moments, and analytically transports the source class distributions before classification. CASTER requires no backward pass, optimizer state, or stored source feature bank. Across four backbones and seven datasets, it outperforms k-NN on identical frozen features in 27 of 28 backbone-dataset settings while retaining a median of 18x less state. Affine transport is not always reliable. On ImageNet-C, where batches contain only 64 samples for 1000 classes, unconditional transport loses 21.2 top-1 points. We therefore introduce an empirical residual-to-margin transportability certificate. Across 307 evaluation cells, every transport losing more than 10 points has certificate value above 3.9, although benign and destructive regimes are not perfectly separated. Gating converts an average -3.35-point effect of unconditional transport into a +1.69-point gain, and performance remains within 0.3 points of the best threshold over a broad threshold range. Finally, we show that this certificate is mechanism-specific: when applied to Tent, it accepts only 4.3% of updates and preserves 0.6% of Tent's available gain. These results position CASTER as a lightweight adaptation mechanism for frozen-model deployment, together with an explicit account of when its safety signal is informative and when it is not.

The unsupervised pretraining of object detectors has recently become a key component of object detector training, as it leads to improved performance and faster convergence during the supervised fine-tuning stage. Existing unsupervised pretraining methods, however, typically rely on low-level information to define proposals that are used to train the detector. Furthermore, in the absence of class labels for these proposals, an auxiliary loss is used to add high-level semantics. This results in complex pipelines and a task gap between the pretraining and the downstream task. We propose a framework that mitigates this issue and consists of three simple yet key ingredients: (i) richer initial proposals that do encode high-level semantics, (ii) class pseudo-labeling through clustering, that enables pretraining using a standard object detection training pipeline, (iii) self-training to iteratively improve and enrich the object proposals. Once the pretraining and downstream tasks are aligned, a simple detection pipeline without further bells and whistles can be directly used for pretraining and, in fact, results in state-of-the-art performance on both the full and low data regimes, across detector architectures and datasets, by significant margins. We further show that our pretraining strategy is also capable of pretraining from scratch (including the backbone) and works on complex images like COCO, paving the path for unsupervised representation learning using object detection directly as a pretext task.

Despite their nearly universal adoption for large language models, the internal workings of transformers are not well understood. We aim to better understand the impact of removing or reorganizing information throughout the layers of a pretrained transformer. Such an understanding could both yield better usage of existing models as well as to make architectural improvements to produce new variants. We present a series of empirical studies on frozen models that show that the lower and final layers of pretrained transformers differ from middle layers, but that middle layers have a surprising amount of uniformity. We further show that some classes of problems have robustness to skipping layers, running the layers in an order different from how they were trained, or running the layers in parallel. Our observations suggest that even frozen pretrained models may gracefully trade accuracy for latency by skipping layers or running layers in parallel.

We explore the plain, non-hierarchical Vision Transformer (ViT) as a backbone network for object detection. This design enables the original ViT architecture to be fine-tuned for object detection without needing to redesign a hierarchical backbone for pre-training. With minimal adaptations for fine-tuning, our plain-backbone detector can achieve competitive results. Surprisingly, we observe: (i) it is sufficient to build a simple feature pyramid from a single-scale feature map (without the common FPN design) and (ii) it is sufficient to use window attention (without shifting) aided with very few cross-window propagation blocks. With plain ViT backbones pre-trained as Masked Autoencoders (MAE), our detector, named ViTDet, can compete with the previous leading methods that were all based on hierarchical backbones, reaching up to 61.3 AP_box on the COCO dataset using only ImageNet-1K pre-training. We hope our study will draw attention to research on plain-backbone detectors. Code for ViTDet is available in Detectron2.

Estimating the 6D pose of objects unseen during training is highly desirable yet challenging. Zero-shot object 6D pose estimation methods address this challenge by leveraging additional task-specific supervision provided by large-scale, photo-realistic synthetic datasets. However, their performance heavily depends on the quality and diversity of rendered data and they require extensive training. In this work, we show how to tackle the same task but without training on specific data. We propose FreeZe, a novel solution that harnesses the capabilities of pre-trained geometric and vision foundation models. FreeZe leverages 3D geometric descriptors learned from unrelated 3D point clouds and 2D visual features learned from web-scale 2D images to generate discriminative 3D point-level descriptors. We then estimate the 6D pose of unseen objects by 3D registration based on RANSAC. We also introduce a novel algorithm to solve ambiguous cases due to geometrically symmetric objects that is based on visual features. We comprehensively evaluate FreeZe across the seven core datasets of the BOP Benchmark, which include over a hundred 3D objects and 20,000 images captured in various scenarios. FreeZe consistently outperforms all state-of-the-art approaches, including competitors extensively trained on synthetic 6D pose estimation data. Code will be publicly available at https://andreacaraffa.github.io/freeze.

This paper revisits the standard pretrain-then-finetune paradigm used in computer vision for visual recognition tasks. Typically, state-of-the-art foundation models are pretrained using large scale (weakly) supervised datasets with billions of images. We introduce an additional pre-pretraining stage that is simple and uses the self-supervised MAE technique to initialize the model. While MAE has only been shown to scale with the size of models, we find that it scales with the size of the training dataset as well. Thus, our MAE-based pre-pretraining scales with both model and data size making it applicable for training foundation models. Pre-pretraining consistently improves both the model convergence and the downstream transfer performance across a range of model scales (millions to billions of parameters), and dataset sizes (millions to billions of images). We measure the effectiveness of pre-pretraining on 10 different visual recognition tasks spanning image classification, video recognition, object detection, low-shot classification and zero-shot recognition. Our largest model achieves new state-of-the-art results on iNaturalist-18 (91.3%), 1-shot ImageNet-1k (62.1%), and zero-shot transfer on Food-101 (96.0%). Our study reveals that model initialization plays a significant role, even for web-scale pretraining with billions of images.

Large-scale self-supervised pre-training has paved the way for one foundation model to handle many different vision tasks. Most pre-training methodologies train a single model of a certain size at one time. Nevertheless, various computation or storage constraints in real-world scenarios require substantial efforts to develop a series of models with different sizes to deploy. Thus, in this study, we propose a novel tri-branch self-supervised training framework, termed as POA (Pre-training Once for All), to tackle this aforementioned issue. Our approach introduces an innovative elastic student branch into a modern self-distillation paradigm. At each pre-training step, we randomly sample a sub-network from the original student to form the elastic student and train all branches in a self-distilling fashion. Once pre-trained, POA allows the extraction of pre-trained models of diverse sizes for downstream tasks. Remarkably, the elastic student facilitates the simultaneous pre-training of multiple models with different sizes, which also acts as an additional ensemble of models of various sizes to enhance representation learning. Extensive experiments, including k-nearest neighbors, linear probing evaluation and assessments on multiple downstream tasks demonstrate the effectiveness and advantages of our POA. It achieves state-of-the-art performance using ViT, Swin Transformer and ResNet backbones, producing around a hundred models with different sizes through a single pre-training session. The code is available at: https://github.com/Qichuzyy/POA.

With the overwhelming trend of mask image modeling led by MAE, generative pre-training has shown a remarkable potential to boost the performance of fundamental models in 2D vision. However, in 3D vision, the over-reliance on Transformer-based backbones and the unordered nature of point clouds have restricted the further development of generative pre-training. In this paper, we propose a novel 3D-to-2D generative pre-training method that is adaptable to any point cloud model. We propose to generate view images from different instructed poses via the cross-attention mechanism as the pre-training scheme. Generating view images has more precise supervision than its point cloud counterpart, thus assisting 3D backbones to have a finer comprehension of the geometrical structure and stereoscopic relations of the point cloud. Experimental results have proved the superiority of our proposed 3D-to-2D generative pre-training over previous pre-training methods. Our method is also effective in boosting the performance of architecture-oriented approaches, achieving state-of-the-art performance when fine-tuning on ScanObjectNN classification and ShapeNetPart segmentation tasks. Code is available at https://github.com/wangzy22/TAP.

With the success of pretraining techniques in representation learning, a number of continual learning methods based on pretrained models have been proposed. Some of these methods design continual learning mechanisms on the pre-trained representations and only allow minimum updates or even no updates of the backbone models during the training of continual learning. In this paper, we question whether the complexity of these models is needed to achieve good performance by comparing them to a simple baseline that we designed. We argue that the pretrained feature extractor itself can be strong enough to achieve a competitive or even better continual learning performance on Split-CIFAR100 and CoRe 50 benchmarks. To validate this, we conduct a very simple baseline that 1) use the frozen pretrained model to extract image features for every class encountered during the continual learning stage and compute their corresponding mean features on training data, and 2) predict the class of the input based on the nearest neighbor distance between test samples and mean features of the classes; i.e., Nearest Mean Classifier (NMC). This baseline is single-headed, exemplar-free, and can be task-free (by updating the means continually). This baseline achieved 88.53% on 10-Split-CIFAR-100, surpassing most state-of-the-art continual learning methods that are all initialized using the same pretrained transformer model. We hope our baseline may encourage future progress in designing learning systems that can continually add quality to the learning representations even if they started from some pretrained weights.

Leveraging capabilities of large language models (LLMs) in text-to-image (T2I) synthesis is an important research direction. In this work we investigate whether the knowledge of a frozen LLM can be effectively utilized in T2I generation when trained exclusively on standard text-image pairs. We integrate a frozen, reasoning-capable LLM with a diffusion-based image generator via shared attention within the Mixture-of-Transformers (MoT) architecture. Our experiments span two critical questions: (1) what degree of the LLM's intrinsic knowledge remains accessible during T2I training, and (2) what novel capabilities emerge in the resulting system. Across established benchmarks, our models achieve strong performance among unified understanding-generation systems: 0.85 on GenEval, 86.75 on DPG-Bench, and 0.66 on WISE with inference-time reasoning, using only text-image data. Remarkably, we uncover emergent behaviors absent from training data, including cross-lingual image generation, color-guided composition, emoji / ASCII scene construction, and generation directed by world knowledge. These results demonstrate that pretrained LLM knowledge can guide image synthesis under standard text-to-image training paradigms, without interleaved multimodal signals or explicit reasoning supervision. Our findings open new avenues for harnessing frozen model capabilities in resource-constrained multimodal learning.

Accurate estimation of pasture biomass from agricultural imagery is critical for sustainable livestock management, yet existing methods are limited by the small, imbalanced, and sparsely annotated datasets typical of real world monitoring. In this study, adaptation of vision foundation models to agricultural regression is systematically evaluated on the CSIRO Pasture Biomass benchmark, a 357 image dual view dataset with laboratory validated, component wise ground truth for five biomass targets, through 17 configurations spanning four backbones (EfficientNet-B3 to DINOv3-ViT-L), five cross view fusion mechanisms, and a 4x2 metadata factorial. A counterintuitive principle, termed "fusion complexity inversion", is uncovered: on scarce agricultural data, a two layer gated depthwise convolution (R^2 = 0.903) outperforms cross view attention transformers (0.833), bidirectional SSMs (0.819), and full Mamba (0.793, below the no fusion baseline). Backbone pretraining scale is found to monotonically dominate all architectural choices, with the DINOv2 -> DINOv3 upgrade alone yielding +5.0 R^2 points. Training only metadata (species, state, and NDVI) is shown to create a universal ceiling at R^2 ~ 0.829, collapsing an 8.4 point fusion spread to 0.1 points. Actionable guidelines for sparse agricultural benchmarks are established: backbone quality should be prioritized over fusion complexity, local modules preferred over global alternatives, and features unavailable at inference excluded.

Vision-language pretraining remains dominated by contrastive objectives, whereas vision-only self-supervised learning has largely adopted non-contrastive methods. At the same time, the role of vision-language encoders has shifted: they are increasingly deployed not as zero-shot classifiers but as the frozen visual backbone of vision-language models and dense prediction systems, which consume the full grid of patch tokens rather than a single pooled embedding. We introduce LeVLJEPA, the first fully non-contrastive end-to-end vision-language pretraining method. LeVLJEPA learns through cross-modal prediction with stop-gradient targets and per-modality distributional regularization, without negatives, temperature, momentum encoder, or teacher-student schedule, and trains stably at large scale. We find that the resulting encoder provides markedly stronger dense semantic features for downstream use: as a frozen vision-language-model backbone, LeVLJEPA is the strongest of the evaluated encoders across GQA, VQAv2, and POPE under two distinct language models, and outperforms contrastive baselines on semantic segmentation, while remaining on par on global readouts such as linear probing. These results establish non-contrastive pretraining as an effective means of producing dense semantic vision features.

In this paper, we present an integral pre-training framework based on masked image modeling (MIM). We advocate for pre-training the backbone and neck jointly so that the transfer gap between MIM and downstream recognition tasks is minimal. We make two technical contributions. First, we unify the reconstruction and recognition necks by inserting a feature pyramid into the pre-training stage. Second, we complement mask image modeling (MIM) with masked feature modeling (MFM) that offers multi-stage supervision to the feature pyramid. The pre-trained models, termed integrally pre-trained transformer pyramid networks (iTPNs), serve as powerful foundation models for visual recognition. In particular, the base/large-level iTPN achieves an 86.2%/87.8% top-1 accuracy on ImageNet-1K, a 53.2%/55.6% box AP on COCO object detection with 1x training schedule using Mask-RCNN, and a 54.7%/57.7% mIoU on ADE20K semantic segmentation using UPerHead -- all these results set new records. Our work inspires the community to work on unifying upstream pre-training and downstream fine-tuning tasks. Code and the pre-trained models will be released at https://github.com/sunsmarterjie/iTPN.

Pre-training datasets, like ImageNet, have become the gold standard in medical image analysis. However, the emergence of self-supervised learning (SSL), which leverages unlabeled data to learn robust features, presents an opportunity to bypass the intensive labeling process. In this study, we explored if SSL for pre-training on non-medical images can be applied to chest radiographs and how it compares to supervised pre-training on non-medical images and on medical images. We utilized a vision transformer and initialized its weights based on (i) SSL pre-training on natural images (DINOv2), (ii) SL pre-training on natural images (ImageNet dataset), and (iii) SL pre-training on chest radiographs from the MIMIC-CXR database. We tested our approach on over 800,000 chest radiographs from six large global datasets, diagnosing more than 20 different imaging findings. Our SSL pre-training on curated images not only outperformed ImageNet-based pre-training (P<0.001 for all datasets) but, in certain cases, also exceeded SL on the MIMIC-CXR dataset. Our findings suggest that selecting the right pre-training strategy, especially with SSL, can be pivotal for improving artificial intelligence (AI)'s diagnostic accuracy in medical imaging. By demonstrating the promise of SSL in chest radiograph analysis, we underline a transformative shift towards more efficient and accurate AI models in medical imaging.

Pre-training by numerous image data has become de-facto for robust 2D representations. In contrast, due to the expensive data acquisition and annotation, a paucity of large-scale 3D datasets severely hinders the learning for high-quality 3D features. In this paper, we propose an alternative to obtain superior 3D representations from 2D pre-trained models via Image-to-Point Masked Autoencoders, named as I2P-MAE. By self-supervised pre-training, we leverage the well learned 2D knowledge to guide 3D masked autoencoding, which reconstructs the masked point tokens with an encoder-decoder architecture. Specifically, we first utilize off-the-shelf 2D models to extract the multi-view visual features of the input point cloud, and then conduct two types of image-to-point learning schemes on top. For one, we introduce a 2D-guided masking strategy that maintains semantically important point tokens to be visible for the encoder. Compared to random masking, the network can better concentrate on significant 3D structures and recover the masked tokens from key spatial cues. For another, we enforce these visible tokens to reconstruct the corresponding multi-view 2D features after the decoder. This enables the network to effectively inherit high-level 2D semantics learned from rich image data for discriminative 3D modeling. Aided by our image-to-point pre-training, the frozen I2P-MAE, without any fine-tuning, achieves 93.4% accuracy for linear SVM on ModelNet40, competitive to the fully trained results of existing methods. By further fine-tuning on on ScanObjectNN's hardest split, I2P-MAE attains the state-of-the-art 90.11% accuracy, +3.68% to the second-best, demonstrating superior transferable capacity. Code will be available at https://github.com/ZrrSkywalker/I2P-MAE.

Click-based interactive image segmentation aims at extracting objects with a limited user clicking. A hierarchical backbone is the de-facto architecture for current methods. Recently, the plain, non-hierarchical Vision Transformer (ViT) has emerged as a competitive backbone for dense prediction tasks. This design allows the original ViT to be a foundation model that can be finetuned for downstream tasks without redesigning a hierarchical backbone for pretraining. Although this design is simple and has been proven effective, it has not yet been explored for interactive image segmentation. To fill this gap, we propose SimpleClick, the first interactive segmentation method that leverages a plain backbone. Based on the plain backbone, we introduce a symmetric patch embedding layer that encodes clicks into the backbone with minor modifications to the backbone itself. With the plain backbone pretrained as a masked autoencoder (MAE), SimpleClick achieves state-of-the-art performance. Remarkably, our method achieves 4.15 NoC@90 on SBD, improving 21.8% over the previous best result. Extensive evaluation on medical images demonstrates the generalizability of our method. We further develop an extremely tiny ViT backbone for SimpleClick and provide a detailed computational analysis, highlighting its suitability as a practical annotation tool.

Brain tumor detection in multiplane Magnetic Resonance Imaging (MRI) slices is a challenging task due to the various appearances and relationships in the structure of the multiplane images. In this paper, we propose a new You Only Look Once (YOLO)-based detection model that incorporates Pretrained Knowledge (PK), called PK-YOLO, to improve the performance for brain tumor detection in multiplane MRI slices. To our best knowledge, PK-YOLO is the first pretrained knowledge guided YOLO-based object detector. The main components of the new method are a pretrained pure lightweight convolutional neural network-based backbone via sparse masked modeling, a YOLO architecture with the pretrained backbone, and a regression loss function for improving small object detection. The pretrained backbone allows for feature transferability of object queries on individual plane MRI slices into the model encoders, and the learned domain knowledge base can improve in-domain detection. The improved loss function can further boost detection performance on small-size brain tumors in multiplanar two-dimensional MRI slices. Experimental results show that the proposed PK-YOLO achieves competitive performance on the multiplanar MRI brain tumor detection datasets compared to state-of-the-art YOLO-like and DETR-like object detectors. The code is available at https://github.com/mkang315/PK-YOLO.

In this work, we introduce frozen-encoder model composition, a novel approach to multimodal embedding models. We build on the VLM-style architecture, in which non-text encoders are adapted to produce input for a language model, which in turn generates embeddings for all varieties of input. We present the result: the jina-embeddings-v5-omni suite, a pair of models that encode text, image, audio, and video input into a single semantic embedding space. Our method is to extend the two Jina Embeddings v5 Text models to support additional media by adding encoders for images and audio. The backbone text embedding models and the added non-text media encoders remain frozen. We only trained the connecting components, representing 0.35% of the total weights of the joint model. Training is therefore much more efficient than full-parameter retraining. Additionally, the language model remains effectively unaltered, producing exactly the same embeddings for text inputs as the Jina Embeddings v5 Text models. Our evaluations show that this approach produces results that are competitive with the state-of-the-art, yielding nearly equal performance to larger multimodal embedding models.

Continual Learning (CL) seeks to enable neural networks to incrementally acquire new knowledge (plasticity) while retaining existing knowledge (stability). While pre-trained models (PTMs) have become pivotal in CL, prevailing approaches freeze the PTM backbone to preserve stability, limiting their plasticity, particularly when encountering significant domain gaps in incremental tasks. Conversely, sequentially finetuning the entire PTM risks catastrophic forgetting of generalizable knowledge, exposing a critical stability-plasticity trade-off. To address this challenge, we propose Adapting PTMs before the core CL process (ACL), a novel framework that refines the PTM backbone through a plug-and-play adaptation phase before learning each new task with existing CL approaches (e.g., prompt tuning). ACL enhances plasticity by aligning embeddings with their original class prototypes while distancing them from others, theoretically and empirically shown to balance stability and plasticity. Extensive experiments demonstrate that ACL significantly improves CL performance across benchmarks and integrated methods, offering a versatile solution for PTM-based CL.

Prototype-based neural networks aim to provide intrinsic interpretability by grounding predictions in a small set of part prototypes. However, modern vision backbones typically operate in normalized, directional embedding spaces where each semantic part exhibits substantial intra-class variability. As a result, point prototypes often become redundant or unstable, hurting both explanation quality and robustness. We propose vMFProto, a distributional part-prototype framework that models each class as a mixture of von Mises-Fisher components on the hypersphere. Each prototype learns its own concentration, capturing part-specific variability, and we use entropic optimal transport (OT) to obtain structured patch-to-prototype assignments. A two-stage training schedule performs OT-driven prototype discovery followed by end-to-end refinement with patch-level distillation and distribution-aware diversity regularization. Experiments with frozen DINO backbones show that vMFProto achieves leading consistency and distinctiveness on CUB-200-2011 and competitive classification accuracy across CUB, Stanford Dogs, and Stanford Cars. Qualitative results confirm that vMFProto yields localized, non-redundant part evidence.

Large, high-capacity models trained on diverse datasets have shown remarkable successes on efficiently tackling downstream applications. In domains from NLP to Computer Vision, this has led to a consolidation of pretrained models, with general pretrained backbones serving as a starting point for many applications. Can such a consolidation happen in robotics? Conventionally, robotic learning methods train a separate model for every application, every robot, and even every environment. Can we instead train generalist X-robot policy that can be adapted efficiently to new robots, tasks, and environments? In this paper, we provide datasets in standardized data formats and models to make it possible to explore this possibility in the context of robotic manipulation, alongside experimental results that provide an example of effective X-robot policies. We assemble a dataset from 22 different robots collected through a collaboration between 21 institutions, demonstrating 527 skills (160266 tasks). We show that a high-capacity model trained on this data, which we call RT-X, exhibits positive transfer and improves the capabilities of multiple robots by leveraging experience from other platforms. More details can be found on the project website https://robotics-transformer-x.github.io{robotics-transformer-x.github.io}.

Parameter-efficient fine-tuning (PEFT) techniques such as low-rank adaptation (LoRA) can effectively adapt large pre-trained foundation models to downstream tasks using only a small fraction (0.1%-10%) of the original trainable weights. An under-explored question of PEFT is in extending the pre-training phase without supervised labels; that is, can we adapt a pre-trained foundation model to a new domain via efficient self-supervised pre-training on this domain? In this work, we introduce ExPLoRA, a highly effective technique to improve transfer learning of pre-trained vision transformers (ViTs) under domain shifts. Initializing a ViT with pre-trained weights on large, natural-image datasets such as from DinoV2 or MAE, ExPLoRA continues the unsupervised pre-training objective on a new domain, unfreezing 1-2 pre-trained ViT blocks and tuning all other layers with LoRA. We then fine-tune the resulting model only with LoRA on this new domain for supervised learning. Our experiments demonstrate state-of-the-art results on satellite imagery, even outperforming fully pre-training and fine-tuning ViTs. Using the DinoV2 training objective, we demonstrate up to 8% improvement in linear probing top-1 accuracy on downstream tasks while using <10% of the number of parameters that are used in prior fully-tuned state-of-the art approaches. Our ablation studies confirm the efficacy of our approach over other baselines such as PEFT. Code is available on the project website: https://samar-khanna.github.io/ExPLoRA/

Bronchopulmonary dysplasia (BPD) is a chronic lung disease affecting 35% of extremely low birth weight infants. Defined by oxygen dependence at 36 weeks postmenstrual age, it causes lifelong respiratory complications. However, preventive interventions carry severe risks, including neurodevelopmental impairment, ventilator-induced lung injury, and systemic complications. Therefore, early BPD prognosis and prediction of BPD outcome is crucial to avoid unnecessary toxicity in low risk infants. Admission radiographs of extremely preterm infants are routinely acquired within 24h of life and could serve as a non-invasive prognostic tool. In this work, we developed and investigated a deep learning approach using chest X-rays from 163 extremely low-birth-weight infants (leq32 weeks gestation, 401-999g) obtained within 24 hours of birth. We fine-tuned a ResNet-50 pretrained specifically on adult chest radiographs, employing progressive layer freezing with discriminative learning rates to prevent overfitting and evaluated a CutMix augmentation and linear probing. For moderate/severe BPD outcome prediction, our best performing model with progressive freezing, linear probing and CutMix achieved an AUROC of 0.78 pm 0.10, balanced accuracy of 0.69 pm 0.10, and an F1-score of 0.67 pm 0.11. In-domain pre-training significantly outperformed ImageNet initialization (p = 0.031) which confirms domain-specific pretraining to be important for BPD outcome prediction. Routine IRDS grades showed limited prognostic value (AUROC 0.57 pm 0.11), confirming the need of learned markers. Our approach demonstrates that domain-specific pretraining enables accurate BPD prediction from routine day-1 radiographs. Through progressive freezing and linear probing, the method remains computationally feasible for site-level implementation and future federated learning deployments.

With the increasing computational costs associated with deep learning, automated hyperparameter optimization methods, strongly relying on black-box Bayesian optimization (BO), face limitations. Freeze-thaw BO offers a promising grey-box alternative, strategically allocating scarce resources incrementally to different configurations. However, the frequent surrogate model updates inherent to this approach pose challenges for existing methods, requiring retraining or fine-tuning their neural network surrogates online, introducing overhead, instability, and hyper-hyperparameters. In this work, we propose FT-PFN, a novel surrogate for Freeze-thaw style BO. FT-PFN is a prior-data fitted network (PFN) that leverages the transformers' in-context learning ability to efficiently and reliably do Bayesian learning curve extrapolation in a single forward pass. Our empirical analysis across three benchmark suites shows that the predictions made by FT-PFN are more accurate and 10-100 times faster than those of the deep Gaussian process and deep ensemble surrogates used in previous work. Furthermore, we show that, when combined with our novel acquisition mechanism (MFPI-random), the resulting in-context freeze-thaw BO method (ifBO), yields new state-of-the-art performance in the same three families of deep learning HPO benchmarks considered in prior work.

Vision-language (VL) pre-training has recently received considerable attention. However, most existing end-to-end pre-training approaches either only aim to tackle VL tasks such as image-text retrieval, visual question answering (VQA) and image captioning that test high-level understanding of images, or only target region-level understanding for tasks such as phrase grounding and object detection. We present FIBER (Fusion-In-the-Backbone-based transformER), a new VL model architecture that can seamlessly handle both these types of tasks. Instead of having dedicated transformer layers for fusion after the uni-modal backbones, FIBER pushes multimodal fusion deep into the model by inserting cross-attention into the image and text backbones, bringing gains in terms of memory and performance. In addition, unlike previous work that is either only pre-trained on image-text data or on fine-grained data with box-level annotations, we present a two-stage pre-training strategy that uses both these kinds of data efficiently: (i) coarse-grained pre-training based on image-text data; followed by (ii) fine-grained pre-training based on image-text-box data. We conduct comprehensive experiments on a wide range of VL tasks, ranging from VQA, image captioning, and retrieval, to phrase grounding, referring expression comprehension, and object detection. Using deep multimodal fusion coupled with the two-stage pre-training, FIBER provides consistent performance improvements over strong baselines across all tasks, often outperforming methods using magnitudes more data. Code is available at https://github.com/microsoft/FIBER.

The rapid progress of large foundation models has been driven predominantly by pretraining on large-scale text corpora. However, many forms of knowledge are conveyed through visual representations, where figures, typeset equations, and page layouts carry rich information that cannot be faithfully or completely captured by text alone. Yet current pretraining approaches discard these visual cues by converting visually rich sources, such as documents and web pages, into plain text for learning language intelligence. This paper challenges the default assumption that language models must be trained on text-only representations and shows that Visual Pretraining is a scalable learner for foundation model intelligence. To this end, we conduct a systematic study of unsupervised visual pretraining paradigms that directly leverage visual documents without text extraction. Across multiple backbones and benchmarks, visual pretraining on the same underlying corpora consistently outperforms text-only pretraining, offering an efficient pathway to scalable language intelligence.

One-stage object detectors such as the YOLO family achieve state-of-the-art performance in real-time vision applications but remain heavily reliant on large-scale labeled datasets for training. In this work, we present a systematic study of contrastive self-supervised learning (SSL) as a means to reduce this dependency by pretraining YOLOv5 and YOLOv8 backbones on unlabeled images using the SimCLR framework. Our approach introduces a simple yet effective pipeline that adapts YOLO's convolutional backbones as encoders, employs global pooling and projection heads, and optimizes a contrastive loss using augmentations of the COCO unlabeled dataset (120k images). The pretrained backbones are then fine-tuned on a cyclist detection task with limited labeled data. Experimental results show that SSL pretraining leads to consistently higher mAP, faster convergence, and improved precision-recall performance, especially in low-label regimes. For example, our SimCLR-pretrained YOLOv8 achieves a mAP@50:95 of 0.7663, outperforming its supervised counterpart despite using no annotations during pretraining. These findings establish a strong baseline for applying contrastive SSL to one-stage detectors and highlight the potential of unlabeled data as a scalable resource for label-efficient object detection.

Pre-training lays the foundation for recent successes in radiograph analysis supported by deep learning. It learns transferable image representations by conducting large-scale fully-supervised or self-supervised learning on a source domain. However, supervised pre-training requires a complex and labor intensive two-stage human-assisted annotation process while self-supervised learning cannot compete with the supervised paradigm. To tackle these issues, we propose a cross-supervised methodology named REviewing FreE-text Reports for Supervision (REFERS), which acquires free supervision signals from original radiology reports accompanying the radiographs. The proposed approach employs a vision transformer and is designed to learn joint representations from multiple views within every patient study. REFERS outperforms its transfer learning and self-supervised learning counterparts on 4 well-known X-ray datasets under extremely limited supervision. Moreover, REFERS even surpasses methods based on a source domain of radiographs with human-assisted structured labels. Thus REFERS has the potential to replace canonical pre-training methodologies.

Pre-training backbone networks on a general annotated dataset (e.g., ImageNet) that comprises numerous manually collected images with category annotations has proven to be indispensable for enhancing the generalization capacity of downstream visual tasks. However, those manually collected images often exhibit bias, which is non-transferable across either categories or domains, thus causing the model's generalization capacity degeneration. To mitigate this problem, we present a low-biased general annotated dataset generation framework (lbGen). Instead of expensive manual collection, we aim at directly generating low-biased images with category annotations. To achieve this goal, we propose to leverage the advantage of a multimodal foundation model (e.g., CLIP), in terms of aligning images in a low-biased semantic space defined by language. Specifically, we develop a bi-level semantic alignment loss, which not only forces all generated images to be consistent with the semantic distribution of all categories belonging to the target dataset in an adversarial learning manner, but also requires each generated image to match the semantic description of its category name. In addition, we further cast an existing image quality scoring model into a quality assurance loss to preserve the quality of the generated image. By leveraging these two loss functions, we can obtain a low-biased image generation model by simply fine-tuning a pre-trained diffusion model using only all category names in the target dataset as input. Experimental results confirm that, compared with the manually labeled dataset or other synthetic datasets, the utilization of our generated low-biased dataset leads to stable generalization capacity enhancement of different backbone networks across various tasks, especially in tasks where the manually labeled samples are scarce.

Visual language models (VLMs) rapidly progressed with the recent success of large language models. There have been growing efforts on visual instruction tuning to extend the LLM with visual inputs, but lacks an in-depth study of the visual language pre-training process, where the model learns to perform joint modeling on both modalities. In this work, we examine the design options for VLM pre-training by augmenting LLM towards VLM through step-by-step controllable comparisons. We introduce three main findings: (1) freezing LLMs during pre-training can achieve decent zero-shot performance, but lack in-context learning capability, which requires unfreezing the LLM; (2) interleaved pre-training data is beneficial whereas image-text pairs alone are not optimal; (3) re-blending text-only instruction data to image-text data during instruction fine-tuning not only remedies the degradation of text-only tasks, but also boosts VLM task accuracy. With an enhanced pre-training recipe we build VILA, a Visual Language model family that consistently outperforms the state-of-the-art models, e.g., LLaVA-1.5, across main benchmarks without bells and whistles. Multi-modal pre-training also helps unveil appealing properties of VILA, including multi-image reasoning, enhanced in-context learning, and better world knowledge.

In a partially observable Markov decision process (POMDP), an agent typically uses a representation of the past to approximate the underlying MDP. We propose to utilize a frozen Pretrained Language Transformer (PLT) for history representation and compression to improve sample efficiency. To avoid training of the Transformer, we introduce FrozenHopfield, which automatically associates observations with pretrained token embeddings. To form these associations, a modern Hopfield network stores these token embeddings, which are retrieved by queries that are obtained by a random but fixed projection of observations. Our new method, HELM, enables actor-critic network architectures that contain a pretrained language Transformer for history representation as a memory module. Since a representation of the past need not be learned, HELM is much more sample efficient than competitors. On Minigrid and Procgen environments HELM achieves new state-of-the-art results. Our code is available at https://github.com/ml-jku/helm.

Online 3D reconstruction models perform poorly on long videos. This happens because regressing poses relative to a fixed first-frame anchor forces extrapolation far beyond the training distribution. Small drifts accumulate and amplify into significant geometric collapse. However, we observe that per-frame depth remains stable throughout this failure. The backbone's local geometry remains intact; only the global pose head breaks down. Motivated by this decoupling, we introduce Scal3R. This approach reformulates online reconstruction as multi-reference relative pose querying. We use lightweight learnable tokens, which make up about ~1% of the parameters, and inject them into a completely frozen backbone via asymmetric attention. This setup queries poses relative to multiple past keyframes. An online pose-graph optimization system with loop closure suppresses long-range drift. Scal3R reaches convergence in 8 hours on a single GPU. It reduces the average ATE by over 60% on KITTI compared to the online baseline. It also achieves state-of-the-art performance across Virtual KITTI, Sintel, TUM-Dynamic, ScanNet, and 7-Scenes. Project page: https://linjohnss.github.io/scal3r/

Semi-supervised semantic segmentation (SSSS) has long turned on one question, which pseudo-labels to trust, and answered it with ever more careful confidence filtering. Foundation backbones change the regime: with a DINOv2 teacher a strict threshold already retains a measured 98%-clean pseudo-label set, so the accuracy that remains lives not in the filter but in how the embedding space is structured by class. We propose PixCon, a clean-positive pixel-contrastive framework. PixCon maintains a per-class memory bank that admits only labeled pixels the student already classifies correctly, guaranteeing a contamination-free positive set (ρ_F=0) by construction, unlike prior contrastive SSSS banks (ReCo, U^2PL) built from confidence-filtered pseudo-labels. It is a single branch over a consistency backbone, adds no inference-time parameters, and needs no bank-specific threshold. A first-order analysis of the supervised-InfoNCE gradient explains why contamination hurts: its false-positive term scales as ρ_F/(1-ρ_F), which we measure (0.018 on Pascal, 0.106 on ADE20K) rather than assume. Across Pascal VOC, Cityscapes, and ADE20K, PixCon matches or improves a strong DINOv2-based UniMatch V2 baseline in a compute-matched one-switch protocol: it improves every Pascal-1/8 seed (a per-seed gain of about +0.2 mIoU) and its three-seed mean reaches 87.90, the published UniMatch V2-B figure. Because contamination is already rare under foundation-model teachers, our analysis indicates the ρ_F=0 guarantee acts chiefly as robustness as teachers weaken, while the accuracy gain comes from cleaner positive supervision, making clean-positive contrast a robust, low-cost default for foundation-model SSSS.

We present a new open-vocabulary detection approach based on detection-oriented image-text pretraining to bridge the gap between image-level pretraining and open-vocabulary object detection. At the pretraining phase, we replace the commonly used classification architecture with the detector architecture, which better serves the region-level recognition needs of detection by enabling the detector heads to learn from noisy image-text pairs. Using only standard contrastive loss and no pseudo-labeling, our approach is a simple yet effective extension of the contrastive learning method to learn emergent object-semantic cues. In addition, we propose a shifted-window learning approach upon window attention to make the backbone representation more robust, translation-invariant, and less biased by the window pattern. On the popular LVIS open-vocabulary detection benchmark, our approach sets a new state of the art of 40.4 mask AP_r using the common ViT-L backbone, significantly outperforming the best existing approach by +6.5 mask AP_r at system level. On the COCO benchmark, we achieve very competitive 40.8 novel AP without pseudo labeling or weak supervision. In addition, we evaluate our approach on the transfer detection setup, where ours outperforms the baseline significantly. Visualization reveals emerging object locality from the pretraining recipes compared to the baseline. Code and models will be publicly released.

In the field of multimodal large language models (MLLMs), common methods typically involve unfreezing the language model during training to foster profound visual understanding. However, the fine-tuning of such models with vision-language data often leads to a diminution of their natural language processing (NLP) capabilities. To avoid this performance degradation, a straightforward solution is to freeze the language model while developing multimodal competencies. Unfortunately, previous works have not attained satisfactory outcomes. Building on the strategy of freezing the language model, we conduct thorough structural exploration and introduce the Inner-Adaptor Architecture (IAA). Specifically, the architecture incorporates multiple multimodal adaptors at varying depths within the large language model to facilitate direct interaction with the inherently text-oriented transformer layers, thereby enabling the frozen language model to acquire multimodal capabilities. Unlike previous approaches of freezing language models that require large-scale aligned data, our proposed architecture is able to achieve superior performance on small-scale datasets. We conduct extensive experiments to improve the general multimodal capabilities and visual grounding abilities of the MLLM. Our approach remarkably outperforms previous state-of-the-art methods across various vision-language benchmarks without sacrificing performance on NLP tasks. Code and models are available at https://github.com/360CVGroup/Inner-Adaptor-Architecture.

Fine-tuning large pre-trained models on downstream tasks has been adopted in a variety of domains recently. However, it is costly to update the entire parameter set of large pre-trained models. Although recently proposed parameter-efficient transfer learning (PETL) techniques allow updating a small subset of parameters (e.g. only using 2% of parameters) inside a pre-trained backbone network for a new task, they only reduce the training memory requirement by up to 30%. This is because the gradient computation for the trainable parameters still requires backpropagation through the large pre-trained backbone model. To address this, we propose Ladder Side-Tuning (LST), a new PETL technique that can reduce training memory requirements by more substantial amounts. Unlike existing parameter-efficient methods that insert additional parameters inside backbone networks, we train a ladder side network, a small and separate network that takes intermediate activations as input via shortcut connections (called ladders) from backbone networks and makes predictions. LST has significantly lower memory requirements than previous methods, because it does not require backpropagation through the backbone network, but instead only through the side network and ladder connections. We evaluate our method with various models (T5 and CLIP-T5) on both NLP (GLUE) and vision-and-language (VQA, GQA, NLVR2 , MSCOCO) tasks. LST saves 69% of the memory costs to fine-tune the whole network, while other methods only save 26% of that in similar parameter usages (hence, 2.7x more memory savings). Moreover, LST achieves higher accuracy than Adapter and LoRA in a low-memory regime. To further show the advantage of this better memory efficiency, we also apply LST to larger T5 models, attaining better GLUE performance than full fine-tuning and other PETL methods. The accuracy-efficiency trade-off also holds on VL tasks.

Large-scale pretraining is fast becoming the norm in Vision-Language (VL) modeling. However, prevailing VL approaches are limited by the requirement for labeled data and the use of complex multi-step pretraining objectives. We present MAGMA - a simple method for augmenting generative language models with additional modalities using adapter-based finetuning. Building on Frozen, we train a series of VL models that autoregressively generate text from arbitrary combinations of visual and textual input. The pretraining is entirely end-to-end using a single language modeling objective, simplifying optimization compared to previous approaches. Importantly, the language model weights remain unchanged during training, allowing for transfer of encyclopedic knowledge and in-context learning abilities from language pretraining. MAGMA outperforms Frozen on open-ended generative tasks, achieving state of the art results on the OKVQA benchmark and competitive results on a range of other popular VL benchmarks, while pretraining on 0.2% of the number of samples used to train SimVLM.

Modern object detectors have taken the advantages of backbone networks pre-trained on large scale datasets. Except for the backbone networks, however, other components such as the detector head and the feature pyramid network (FPN) remain trained from scratch, which hinders fully tapping the potential of representation models. In this study, we propose to integrally migrate pre-trained transformer encoder-decoders (imTED) to a detector, constructing a feature extraction path which is ``fully pre-trained" so that detectors' generalization capacity is maximized. The essential differences between imTED with the baseline detector are twofold: (1) migrating the pre-trained transformer decoder to the detector head while removing the randomly initialized FPN from the feature extraction path; and (2) defining a multi-scale feature modulator (MFM) to enhance scale adaptability. Such designs not only reduce randomly initialized parameters significantly but also unify detector training with representation learning intendedly. Experiments on the MS COCO object detection dataset show that imTED consistently outperforms its counterparts by sim2.4 AP. Without bells and whistles, imTED improves the state-of-the-art of few-shot object detection by up to 7.6 AP. Code is available at https://github.com/LiewFeng/imTED.

Contrastive Language-Image Pretraining (CLIP) stands out as a prominent method for image representation learning. Various neural architectures, spanning Transformer-based models like Vision Transformers (ViTs) to Convolutional Networks (ConvNets) like ResNets, are trained with CLIP and serve as universal backbones across diverse vision tasks. Despite utilizing the same data and training objectives, the effectiveness of representations learned by these architectures raises a critical question. Our investigation explores the differences in CLIP performance among these backbone architectures, revealing significant disparities in their classifications. Notably, normalizing these representations results in substantial performance variations. Our findings showcase a remarkable possible synergy between backbone predictions that could reach an improvement of over 20% through informed selection of the appropriate backbone. Moreover, we propose a simple, yet effective approach to combine predictions from multiple backbones, leading to a notable performance boost of up to 6.34\%. We will release the code for reproducing the results.

This study investigates the impact of self-supervised pretraining of 3D semantic segmentation models on a large-scale, domain-specific dataset. We introduce BRAINS-45K, a dataset of 44,756 brain MRI volumes from public sources, the largest public dataset available, and revisit a number of design choices for pretraining modern segmentation architectures by simplifying and optimizing state-of-the-art methods, and combining them with a novel augmentation strategy. The resulting AMAES framework is based on masked-image-modeling and intensity-based augmentation reversal and balances memory usage, runtime, and finetuning performance. Using the popular U-Net and the recent MedNeXt architecture as backbones, we evaluate the effect of pretraining on three challenging downstream tasks, covering single-sequence, low-resource settings, and out-of-domain generalization. The results highlight that pretraining on the proposed dataset with AMAES significantly improves segmentation performance in the majority of evaluated cases, and that it is beneficial to pretrain the model with augmentations, despite pretraing on a large-scale dataset. Code and model checkpoints for reproducing results, as well as the BRAINS-45K dataset are available at https://github.com/asbjrnmunk/amaes.

In this paper we delve into the properties of transformers, attained through self-supervision, in the point cloud domain. Specifically, we evaluate the effectiveness of Masked Autoencoding as a pretraining scheme, and explore Momentum Contrast as an alternative. In our study we investigate the impact of data quantity on the learned features, and uncover similarities in the transformer's behavior across domains. Through comprehensive visualiations, we observe that the transformer learns to attend to semantically meaningful regions, indicating that pretraining leads to a better understanding of the underlying geometry. Moreover, we examine the finetuning process and its effect on the learned representations. Based on that, we devise an unfreezing strategy which consistently outperforms our baseline without introducing any other modifications to the model or the training pipeline, and achieve state-of-the-art results in the classification task among transformer models.

Industrial CAD workflows require robust, generalizable 3D geometric representations supporting accuracy and explainability. We introduce Shape, a self-supervised foundation model converting surface meshes into dense per-token embeddings. Shape combines a structured 3D latent grid, a multi-scale geometry-aware tokenizer (MAGNO) with cross-attention, and a transformer processor using grouped-query attention and RMSNorm. A learned reconstruction prior enables per-region attribution for explainable predictions. Pretraining uses masked-token reconstruction of normalized geometry statistics and multi-resolution contrastive consistency. The 10.9M-parameter backbone is pretrained on 61,052 CAD meshes from Thingi10K, MFCAD, and Fusion360. On a held-out split of 2,983 meshes, Shape achieves reconstruction R2 = 0.729 and 98.1% top-1 retrieval under the Wang-Isola protocol, with near-zero reconstruction train/val gap (contrastive scores use a larger evaluation pool). A 2x2 ablation on loss type and target-space normalization shows per-dimension normalization is critical: without it, performance collapses (R2 < 0.14, top-1 < 88%); with it, both losses succeed (R2 > 0.70, top-1 > 96%). Smooth-L1 offers secondary stability. Code, embeddings, and an interactive demo are released at https://github.com/simd-ai/shape.