Daily Papers

We set out to reproduce a recent hallucination-mitigation result on the POPE benchmark. The LLaVA-1.5-7B baseline we measured, 82.21 F1 on the adversarial split, sat 1.21 to 8.67 points above the adversarial baselines we planned to compare against (81.00, 79.30, and 73.54). We looked at the evaluation code and found a readout choice that moves F1 on its own. A two-token logit readout decides yes versus no by comparing two vocabulary IDs, 3582 ("yes") and 1217 ("no"). Across 9,000 greedy-decode questions spanning all three splits, neither ID is generated even once. The model emits " Yes" (token 3869) and " No" (token 1939), because SentencePiece prepends a space byte after the prompt suffix "ASSISTANT:". Read with an eight-token lookup that covers the space-prefixed surface forms, LLaVA-1.5-7B scores F1 0.8221, 0.8498, and 0.8713 on the adversarial, popular, and random splits. That 6.13-point adversarial shift exceeds the adversarial gain reported by five of the six papers we surveyed. None of them states its readout, and our reference ran under 4-bit NF4 quantization, so we cannot say how much of any reported gain a matched evaluation would keep. That comparison stays unresolved until readout and precision are matched. On the fixed baseline we run nine inference-time corrections of our own (none beat it) and dissect why the adversarial split resists logit-level intervention. In a 3,000-question probe, wrong predictions draw more image attention than correct ones (Cohen's d=-0.46, p=1.4times10^{-24}), the opposite of what grounding-based corrections assume. A four-readout audit across four further VLMs from three tokenizer families confirms the confound is protocol-level, not model-specific: porting the LLaVA-1.5 IDs verbatim drops F1 to 0.00 on the two disjoint-vocabulary models, whereas a tokenizer-derived readout holds between 0.80 and 0.92.

Reinforcement learning (RL) post-training improves the reward alignment of flow-based generators, but often degrades perceptual quality in ways that are not captured by the reward proxy. We identify a simple structural signature of this drift: across three post-training methods (NFT, AWM, DPO), RL fine-tuning inflates the per-step velocity norm |v_θ| by 5% to 15% relative to the reference. A form of norm inflation has been studied in classifier-free guidance (CFG), where rescaling the velocity back to a reference norm at inference time can mitigate the resulting artifacts. However, this inference-time correction does not transfer cleanly to RL: rescaling v_θ to match |v_{ref}| at inference time neither improves reward nor fixes the quality degradation, because the inflation is co-adapted into the model weights. Furthermore, an adjoint sensitivity analysis shows that velocity magnitude rescaling carries no coherent first-order reward signal at the batch level, indicating that suppressing norm inflation is unlikely to remove a consistently reward-carrying component. Since inference-time renormalization fails while norm suppression carries no reward cost, training-time intervention is the appropriate strategy. Together, these findings motivate \methodname, a hinge penalty that activates only when |v_θ| exceeds |v_{ref}| and composes additively with any velocity-local base loss. Across two base models, three post-training methods, and two reward proxies, \methodname consistently improves MLLM-judged image quality and forensic realism while preserving reward, with gains that amplify under few-step inference and are not explained by early stopping.

Autoregressive language models execute Transformer layers sequentially, creating a latency bottleneck that is not removed by conventional tensor or pipeline parallelism. We study whether this layerwise dependency can be relaxed by treating the hidden-state trace across layers as the solution of a nonlinear residual equation and solving it with parallel Newton-style updates. While this view is principled, exact Newton corrections require expensive Jacobian-vector products and naive fixed-point iterations are unstable on trained Transformers. We introduce Structured Newton Layer Parallelism (SNLP), a training and inference framework that replaces exact layer Jacobians with cheap architecture-induced surrogate dynamics. In residual Transformers, this yields Identity Newton (IDN), where the correction reduces to a prefix-sum-like update; in mHC-style architectures, HC Newton (HCN) uses the model's residual mixing matrix. We further introduce SNLP-aware regularization, which trains models to make one or a few structured Newton iterations accurately approximate the sequential forward. Experiments on nanochat-scale Transformers show that SNLP regularization improves layer-parallel compatibility and can also improve standard sequential perplexity, reducing baseline PPL by 4.7%-23.4%. At inference time, SNLP combined with layer fusion and chunkwise decomposition achieves practical wall-clock speedups: on a 0.5B Nanochat model, it reaches 2.3x speedup while still improving PPL by 6.1%. These results suggest that layer-parallel inference is not merely a numerical approximation to sequential execution, but can act as a useful solver-induced inference bias. We also characterize limitations: off-the-shelf pretrained models are less amenable to this procedure, and exact convergence recovers the sequential computation rather than providing monotonic inference-time scaling.

Many inference-time tasks for pretrained discrete diffusion models and diffusion language models reduce to drawing samples from a tilted version of the pretrained distribution. Feynman-Kac sequential Monte Carlo (SMC) makes this correction exact in principle, but its prescribed weights routinely degenerate when the proposal dynamics are misaligned with the tilt, capping the practical gains from additional particles. We introduce FluxLite, a lightweight, training-free proposal-control framework for discrete diffusion. On the sparse directed graph of pretrained reverse rates, any sparse jump-rate perturbation can be exactly compensated by a q_t-weighted graph-divergence term in the Feynman-Kac potential; the target path is therefore preserved while the residual reweighting variance becomes a local convex objective. We instantiate this principle as two practical samplers: a one-hop local reallocation rule (HEU) and a small nonnegative quadratic program over pretrained-rate bases (D-VCG). We further prove population stability under the standard score-entropy training loss, identifying a tilted-path coverage factor that governs robustness to score error, together with finite-particle convergence for a fixed controlled Feynman-Kac recursion. Empirically, FluxLite improves over standard Feynman-Kac SMC baselines by up to two orders of magnitude in terminal KL on an analytically tractable finite-state CTMC benchmark, and reduces row-correlation MSE on 2D Ising sampling by 5-7x in geometric mean and up to 55x at peak.

We study inference-time scaling for diffusion models, where the goal is to adapt a pre-trained model to new target distributions without retraining. Existing guidance-based methods are simple but introduce bias, while particle-based corrections suffer from weight degeneracy and high computational cost. We introduce DriftLite, a lightweight, training-free particle-based approach that steers the inference dynamics on the fly with provably optimal stability control. DriftLite exploits a previously unexplored degree of freedom in the Fokker-Planck equation between the drift and particle potential, and yields two practical instantiations: Variance- and Energy-Controlling Guidance (VCG/ECG) for approximating the optimal drift with minimal overhead. Across Gaussian mixture models, particle systems, and large-scale protein-ligand co-folding problems, DriftLite consistently reduces variance and improves sample quality over pure guidance and sequential Monte Carlo baselines. These results highlight a principled, efficient route toward scalable inference-time adaptation of diffusion models.

Strong reasoning depends not only on model knowledge but also on how effectively cognitive behaviors are deployed during generation. Existing methods often rely on explicit behavior-level control, making them insufficiently adaptive when failures and required corrections vary across reasoning states, tasks, and models. To this end, we propose Latent Reward Steering (LRS), an adaptive inference-time framework that promotes cognitive behaviors by optimizing the sparse-autoencoder (SAE) latent states that implicitly carry them. Rather than relying on predefined cognitive behaviors or steering directions derived from them, LRS trains a latent reward model on reasoning traces by final answer correctness to estimate the quality of intermediate latent states. During inference, reward gradients provide state-specific correction directions for fragile latent states, while a reward and confidence gate restricts intervention to states the reward signal flags as fragile. Experiments on multiple reasoning LLM backbones and benchmarks show that \ours consistently improves performance over various baselines, and post-hoc analyses further indicate that \ours implicitly promotes good cognitive behaviors that fix the original reasoning errors. Code is available at: https://github.com/jiakanglee/Latent-Reward-Steering.

Diffusion models sample effectively from high-dimensional, multimodal distributions, but their outputs may violate deployment constraints. For task-space robot policies, generated grasps, waypoints, or trajectories can be distributionally valid yet infeasible, violating reachability, collision-avoidance, or closed-loop executability requirements. This embodiment gap limits zero-shot deployment across robots, even when the task-space behavior itself is transferable. We propose an inference-time optimization framework that couples the behavior generation to physical feasibility by formulating diffusion guidance as a constrained optimization problem. Our key insight is to replace the sampling perturbation in the backward process with an optimized correction, allowing hard constraints or soft penalties to be imposed during sampling without the need to retrain the diffusion model, while keeping samples close to the learned prior. We evaluate the method on dexterous grasp synthesis with reachability and collision-avoidance constraints, and dynamic manipulation with controller-level trackability constraints. Across settings and robot embodiments, optimization-guided denoising matches the feasibility of projection- and gradient-guidance baselines while better preserving grasp quality, and improving controller-level executability and task success, with task success improving by up to 20pp. on dexterous grasping and 23pp. on visuomotor manipulation over the best baseline.

Adapting large language models to individual users remains challenging due to the tension between fine-grained personalization and scalable deployment. We present CARD, a hierarchical framework that achieves effective personalization through progressive refinement. CARD first clusters users according to shared stylistic patterns and learns group-specific LoRA adapters, enabling robust generalization and strong low-resource performance. To capture individual differences within each cluster, we propose an implicit preference learning mechanism that contrasts user-authored text with cluster-level generations, allowing the model to infer user-specific style preferences without manual annotation. At inference time, CARD injects personalization exclusively at decoding via lightweight user preference vectors and low-rank logit corrections, while keeping the base model frozen. Experiments on the LaMP and LongLaMP benchmarks show that CARD achieves superior generation quality compared to baselines, while significantly improving efficiency and scalability for practical personalized text generation.

We present LARA (Lightweight Additive Residual Adaptation), a method for efficient adaptation that operates in the residual stream of a frozen model rather than in its weights. Where LoRA adds an update of low rank to weight matrices, LARA reads the hidden state at a small set of layers and adds a correction of low rank back to the residual stream, leaving all base weights untouched. On a code fine-tuning task and on preference optimization (DPO), LARA matches LoRA at equal parameter counts. Because adaptation is a frozen base plus a residual, LARA exposes a scale γ, applied at inference, that interpolates smoothly between base and adapted behavior, a form of graded control that adaptation in weight space does not offer. Finally, because each behavior is a small residual module over a shared frozen base, many behaviors can be held resident at once and routed automatically per token. We place seven behaviors, six fine-tuned and one optimized for preference, on one frozen 1.5B model for roughly 33 MB of overhead, against one full model for each behavior. Because the base is untouched, behaviors are trained separately and selected per token rather than loaded on demand, which suits hosting many behaviors, and adding new ones, on a single model on a device.

A fundamental tension exists in the large-step inference of diffusion models via their deterministic probability flow ordinary differential equation (PF-ODE) trajectories, which we identify as the contractivity trap: efficient inference favors large step sizes, while aggressive steps and highly expressive denoisers can undermine contraction-based stability certificates for error suppression. To address this, we propose SteinDiff, a step-wise inference-time stabilization framework that employs Stein-derived corrections without requiring reference samples. Specifically, SteinDiff introduces a geometry-aware residual correction mechanism that regularizes large-step solver updates without retraining. To this end, we derive a closed-form Stein correction coefficient for step-wise solver adjustment, enabling reference-free adaptation to local data geometry. We further establish a score-controlled perturbation bound under distributional shifts and provide a complementary Stein perspective on EDM-style parameterizations. Extensive experiments demonstrate that SteinDiff mitigates severe artifacts and improves generative quality across large-step inference settings.

Controlling restricted knowledge in large language models is essential for model alignment and safe deployment. Test-time unlearning avoids costly retraining and parameter updates by intervening only during inference. However, existing activation-editing methods apply isolated pointwise corrections, overlooking how autoregressive generation continually reconstructs hidden states from the prompt, cache, and generated prefix. Consequently, later states may return to restricted knowledge regions after a locally successful correction, causing restricted knowledge re-entry. In this work, we propose Stateful Test-Time Unlearning via restricted knowledge boundary control (ST^2U), which formulates test-time unlearning as trajectory-wide boundary control. ST^2U first models restricted knowledge boundaries in low-dimensional invertible coordinates while leaving orthogonal non-target components unchanged. During inference, ST^2U monitors risk along the trajectory, applies minimal boundary corrections with contextual anchoring, and propagates historical correction states across tokens to mitigate knowledge re-entry. This trajectory-wide control enables more persistent forgetting while preserving non-target capabilities and limiting inference overhead. Across three benchmarks and three model families, ST^2U delivers the strongest overall balance, combining best or second-best retention with competitive forgetting and substantially less restricted-knowledge re-entry than test-time baselines (13.76%-19.84% versus 46.50%-59.10%).

Large language models are prominently used in real-world applications, often tasked with reasoning over large volumes of documents. An exciting development in this space is models boasting extended context capabilities, with some accommodating over 2 million tokens. Such long context model capabilities remain uncertain in production systems, motivating the need to benchmark their performance on real world use cases. We address this challenge by proposing SWiM, an evaluation framework that addresses the limitations of standard tests. Testing the framework on eight long context models, we find that even strong models such as GPT-4 and Claude 3 Opus degrade in performance when information is present in the middle of the context window (lost-in-the-middle effect). Next, in addition to our benchmark, we propose medoid voting, a simple, but effective training-free approach that helps alleviate this effect, by generating responses a few times, each time randomly permuting documents in the context, and selecting the medoid answer. We evaluate medoid voting on single document QA tasks, achieving up to a 24% lift in accuracy.

Despite the strong capabilities of Large Language Models (LLMs) to acquire knowledge from their training corpora, the memorization of sensitive information in the corpora such as copyrighted, biased, and private content has led to ethical and legal concerns. In response to these challenges, unlearning has emerged as a potential remedy for LLMs affected by problematic training data. However, previous unlearning techniques are either not applicable to black-box LLMs due to required access to model internal weights, or violate data protection principles by retaining sensitive data for inference-time correction. We propose δ-Unlearning, an offset unlearning framework for black-box LLMs. Instead of tuning the black-box LLM itself, δ-Unlearning learns the logit offset needed for unlearning by contrasting the logits from a pair of smaller models. Experiments demonstrate that δ- Unlearning can effectively unlearn target data while maintaining similar or even stronger performance on general out-of-forget-scope tasks. δ-Unlearning also effectively incorporates different unlearning algorithms, making our approach a versatile solution to adapting various existing unlearning algorithms to black-box LLMs.

Multiple-choice questions (MCQs) are a standard format for evaluating large language models (LLMs), yet the popularity of answer options can confound evaluation. Modern LLMs systematically prefer popular but incorrect options over less popular correct ones, a vulnerability we call popularity bias. This pattern aligns with confidence miscalibration: model confidence remains high even as accuracy collapses for popular options. To systematically isolate this phenomenon, we introduce PopMCQ, a benchmark with six controlled strategies that vary option popularity while keeping the correct answer fixed. In our most adversarial setting, where all distractors are more popular than the correct option, models choose popular but wrong answers 66\% of the time. To mitigate this bias, we propose PopDebias, a lightweight inference-time correction that estimates and removes a popularity prior from model predictions. It requires no fine-tuning, is label-free at test time (using only a small calibration split for parameter fitting), and adds negligible computational cost. Experiments on 22 open-source LLMs (0.5B to 32B parameters) show consistent improvements, with accuracy gains up to 54.1 percentage points under strong popularity pressure. The code and data are available https://github.com/DataScienceUIBK/PopMCQ

We present a lightweight, training-free trajectory correction method that adapts a pretrained image editing model to each input manga image using only the input itself. Despite recent progress in pretrained image editing, such models often underperform on manga because they are trained predominantly on natural-image data, while re-training or fine-tuning them on manga is costly and raises copyright concerns. Many manga image editing tasks encountered in practice are structure-preserving, requiring local details to be modified while the input's global composition is retained. To support this common editing setting, our method corrects the early editing trajectory by anchoring it to an empty-prompt reconstruction trajectory. Experiments indicate improved performance in the main text-removal setting, while qualitative examples suggest better composition preservation in screentone synthesis. With FLUX.1 Kontext on an RTX A6000, the method incurs 11% runtime overhead and 0.1% peak-memory overhead; an additional runtime measurement with Qwen Image Edit 2509 on an NVIDIA H200 shows only a 0.1% increase.

Language models (LMs) are susceptible to in-context reward hacking, where they exploit flaws in tainted or faulty written specifications or rubrics to achieve high scores without fulfilling the user's true intent. We introduce Specification Self-Correction (SSC), a novel, test-time framework that enables an LM to identify and correct flaws within its own guiding specification. SSC employs a multi-step inference process where the model first generates a response based on a potentially tainted specification, critiques its output, and then revises the specification itself to remove the exploitable loophole. A final, more robust response is then generated using this self-corrected specification. Across experiments spanning creative writing and agentic coding tasks with several LMs, we demonstrate that while models initially game tainted specifications in 50-70\% of cases, the SSC process reduces this vulnerability by over 90\%. This dynamic repair occurs at inference time, requires no weight modification, and leads to more robustly aligned model behavior. Code at https://github.com/vicgalle/specification-self-correction .

Recent advances in large language models (LLMs) have demonstrated that inference-time computation techniques, such as decoding-time scaling and self-refinement, can significantly enhance reasoning capabilities without relying on external knowledge. A key driver of this success is the emergence of self-correction and self-verification behaviors, often elicited through reinforcement learning (RL). In this paper, we investigate whether these inference-time techniques extend effectively to vision-language models (VLMs), particularly those trained with RL. We find that while decoding strategies such as majority voting and best-of-N selection with self-verification all improve VLM reasoning performance, generation-reliant methods such as the former achieve significantly higher gains versus verification-reliant methods such as the latter. Additionally, the self-correction behavior often associated with RL-tuned models, such as aha moment, does not lead to measurable gains. We show via extensive experimentation within the inference-time scaling framework to identify a key root cause: RL-trained VLMs still lack robust self-verification capabilities across both visual and textual modalities.

Extending the generation horizon of video diffusion models to long sequences remains a long-standing and important challenge. Existing training-free approaches fall into two categories: extensions of bidirectional models, which are tightly coupled to specific architectures and suffer from quality degradation over long horizons, and autoregressive models, which accumulate drift errors due to exposure bias and tend to produce repetitive motion patterns. To address these issues, we propose a novel but simple inference-time approach for long video generation that is architecture-agnostic and requires no additional training. Our method generates long videos via overlapping sliding windows, where predicted clean samples from adjacent windows are blended via Tweedie matching to enforce both manifold constraint and temporal consistency across overlap regions. Stochastic early-phase sampling then synchronizes per-window trajectories by injecting fresh noise after each Tweedie matching correction in the high-noise phase, before transitioning to deterministic ODE sampling to preserve fine-grained visual fidelity. Applied to various video generation models, our method generates videos several times longer than the native window length while outperforming both training-free and autoregressive baselines in temporal consistency and visual quality, and further extends to audio-video joint generation and text-to-3DGS without any fine-tuning.

Achieving precise alignment between user intent and generated visuals remains a central challenge in text-to-visual generation, as a single attempt often fails to produce the desired output. To handle this, prior approaches mainly scale the visual generation process (e.g., increasing sampling steps or seeds), but this quickly leads to a quality plateau. This limitation arises because the prompt, crucial for guiding generation, is kept fixed. To address this, we propose Prompt Redesign for Inference-time Scaling, coined PRIS, a framework that adaptively revises the prompt during inference in response to the scaled visual generations. The core idea of PRIS is to review the generated visuals, identify recurring failure patterns across visuals, and redesign the prompt accordingly before regenerating the visuals with the revised prompt. To provide precise alignment feedback for prompt revision, we introduce a new verifier, element-level factual correction, which evaluates the alignment between prompt attributes and generated visuals at a fine-grained level, achieving more accurate and interpretable assessments than holistic measures. Extensive experiments on both text-to-image and text-to-video benchmarks demonstrate the effectiveness of our approach, including a 15% gain on VBench 2.0. These results highlight that jointly scaling prompts and visuals is key to fully leveraging scaling laws at inference-time. Visualizations are available at the website: https://subin-kim-cv.github.io/PRIS.

Generative vision-language models (VLMs) are increasingly used in human-centered settings, yet they can produce demographically biased outputs even when images differ only in controlled attributes such as perceived race or gender. However, existing inference-time debiasers were largely designed for static embeddings or CLIP-like models rather than generative VLMs. We propose GGSS---Geodesic-Gated Spherical Steering---a norm-preserving intervention that discovers a counterfactual bias subspace on the unit hypersphere, steers visual tokens along geodesic arcs, and uses an adaptive gate to focus correction on tokens that carry stronger demographic signal. We evaluate four generative VLMs against ten adapted inference-time debiasing baselines and prompt-based mitigation under a single operating-point protocol across categorical, pairwise, and occupation-gender bias tests, while also measuring general visual-language capability. GGSS achieves the lowest average bias on all four models, significant on three of four backbones under paired permutation tests, while preserving MMStar accuracy within +/- 0.6 p.p. of the unsteered baseline. Code is available at https://github.com/dukesun99/GGSS.

Large language model (LLM) agents show promise on realistic tool-use tasks, but deploying capable agents on modest hardware remains challenging. We study whether inference-time scaffolding alone, without any additional training compute, can improve the performance of a small model in complex multi-step environments. Operating on a single 24GB GPU, we evaluate Qwen3-8B on the AppWorld benchmark under both full-precision and 4-bit quantized configurations. Without any intervention, the raw model achieves just 5.4% (FP16) and 3.0% (AWQ) task goal completion. Guided by a systematic failure mode analysis, we introduce a three-tier inference scaffolding pipeline that deploys the same frozen model in three distinct roles: (1) a summarization model that preserves critical artifacts (tokens, credentials, API responses) while compressing dialogue history; (2) the main agent model that reasons over the compressed context; and (3) an isolated correction model that reviews and revises the agent's code output without access to conversation history, breaking repetitive failure loops. Applied to the same unmodified model, this scaffolding yields 8.9% (FP16) and 5.9% (AWQ) task goal completion, roughly doubling performance in both settings, with particularly strong gains on difficulty-1 tasks (15.8% to 26.3% FP16; 5.3% to 14.0% AWQ). On full-precision inference, our scaffolded 8B model surpasses DeepSeek-Coder 33B Instruct (7.1%) from the original AppWorld evaluation, demonstrating that structured inference-time interventions can make small models competitive with systems 4 times their size. We formalize the approach as a scaffolded policy over a frozen base model, three invocations of the same weights with different conditioning, drawing connections to test-time compute scaling and action-space shaping in reinforcement learning.

Inference-time steering enables pretrained diffusion/flow models to be adapted to new tasks without retraining. A widely used approach is the ratio-of-densities method, which defines a time-indexed target path by reweighting probability-density trajectories from multiple models with positive, or in some cases, negative exponents. This construction, however, harbors a critical and previously unformalized failure mode: Marginal Path Collapse, where intermediate densities become non-normalizable even though endpoints remain valid. Collapse arises systematically when composing heterogeneous models trained on different noise schedules or datasets, including a common setting in molecular design where de-novo, conformer, and pocket-conditioned models must be combined for tasks such as flexible-pose scaffold decoration. We provide a novel and complete solution for the problem. First, we derive a simple path existence criterion that predicts exactly when collapse occurs from noise schedules and exponents alone. Second, we introduce Adaptive path Correction with Exponents (ACE), which extends Feynman-Kac steering to time-varying exponents and guarantees a valid probability path. On a synthetic 2D benchmark and on flexible-pose scaffold decoration, ACE eliminates collapse and enables high-guidance compositional generation, improving distributional and docking metrics over constant-exponent baselines and even specialized task-specific scaffold decoration models. Our work turns ratio-of-densities steering with heterogeneous experts from an unstable heuristic into a reliable tool for controllable generation.

We study fact-level repair for multimodal generation, where a fluent output may contain specific facts that are not supported by the input. Existing inference-time repair methods often generate feedback by jointly conditioning on the input and the current output. This design has two limitations: hallucinated claims in the output can bias the model's interpretation of the input, and free-form feedback cannot be ranked or scheduled at the fact level. We present TIGER, an inference-time framework that redesigns feedback for localized repair. TIGER independently extracts an observation graph from the input and a claim graph from the current output, then assigns each claim a graph-conditioned risk score based on support and conflict. The model repairs selected high-risk claims while keeping the backbone frozen. We provide a convergence analysis showing that the expected total risk decreases geometrically to an explicit asymptotic bound under mild assumptions. Experiments across four cross-modal paths, including image-to-text, image+text-to-text, audio-to-text, and video-to-text, show that TIGER reduces unsupported content while preserving task quality. The gains hold across multiple backbones, and a CrisisFACTS case study suggests that the same repair mechanism can improve grounding in multi-source settings.

Question Answering systems these days typically use template-based language generation. Though adequate for a domain-specific task, these systems are too restrictive and predefined for domain-independent systems. This paper proposes a system that outputs a full-length answer given a question and the extracted factoid answer (short spans such as named entities) as the input. Our system uses constituency and dependency parse trees of questions. A transformer-based Grammar Error Correction model GECToR (2020), is used as a post-processing step for better fluency. We compare our system with (i) Modified Pointer Generator (SOTA) and (ii) Fine-tuned DialoGPT for factoid questions. We also test our approach on existential (yes-no) questions with better results. Our model generates accurate and fluent answers than the state-of-the-art (SOTA) approaches. The evaluation is done on NewsQA and SqUAD datasets with an increment of 0.4 and 0.9 percentage points in ROUGE-1 score respectively. Also the inference time is reduced by 85\% as compared to the SOTA. The improved datasets used for our evaluation will be released as part of the research contribution.

Self-correction is an effective technique for maintaining parallel sampling in discrete diffusion models with minimal performance degradation. Prior work has explored self-correction at inference time or during post-training; however, such approaches often suffer from limited generalization and may impair reasoning performance. GIDD pioneers pretraining-based self-correction via a multi-step BERT-style uniform-absorbing objective. However, GIDD relies on a continuous interpolation-based pipeline with opaque interactions between uniform transitions and absorbing masks, which complicates hyperparameter tuning and hinders practical performance. In this work, we propose a Self-Correcting Discrete Diffusion (SCDD) model to reformulate pretrained self-correction with explicit state transitions and learn directly in discrete time. Our framework also simplifies the training noise schedule, eliminates a redundant remasking step, and relies exclusively on uniform transitions to learn self-correction. Experiments at the GPT-2 scale demonstrate that our method enables more efficient parallel decoding while preserving generation quality.

Test-time scaling (TTS) has enhanced the performance of Reasoning Models (RMs) on various tasks such as math and coding, yet its efficacy in machine translation (MT) remains underexplored. This paper investigates whether increased inference-time computation improves translation quality. We evaluate 12 RMs across a diverse suite of MT benchmarks spanning multiple domains, examining three scenarios: direct translation, forced-reasoning extrapolation, and post-editing. Our findings show that for general-purpose RMs, TTS provides limited and inconsistent benefits for direct translation, with performance quickly plateauing. However, the effectiveness of TTS is unlocked by domain-specific fine-tuning, which aligns a model's reasoning process with task requirements, leading to consistent improvements up to an optimal, self-determined reasoning depth. We also find that forcing a model to reason beyond its natural stopping point consistently degrades translation quality. In contrast, TTS proves highly effective in a post-editing context, reliably turning self-correction into a beneficial process. These results indicate that the value of inference-time computation in MT lies not in enhancing single-pass translation with general models, but in targeted applications like multi-step, self-correction workflows and in conjunction with task-specialized models.

We study self-rewarding reasoning large language models (LLMs), which can simultaneously generate step-by-step reasoning and evaluate the correctness of their outputs during the inference time-without external feedback. This integrated approach allows a single model to independently guide its reasoning process, offering computational advantages for model deployment. We particularly focus on the representative task of self-correction, where models autonomously detect errors in their responses, revise outputs, and decide when to terminate iterative refinement loops. To enable this, we propose a two-staged algorithmic framework for constructing self-rewarding reasoning models using only self-generated data. In the first stage, we employ sequential rejection sampling to synthesize long chain-of-thought trajectories that incorporate both self-rewarding and self-correction mechanisms. Fine-tuning models on these curated data allows them to learn the patterns of self-rewarding and self-correction. In the second stage, we further enhance the models' ability to assess response accuracy and refine outputs through reinforcement learning with rule-based signals. Experiments with Llama-3 and Qwen-2.5 demonstrate that our approach surpasses intrinsic self-correction capabilities and achieves performance comparable to systems that rely on external reward models.

Iterative sampling in diffusion models can lead to error accumulation due to exposure bias. The denoiser is trained on real images interpolated with noise, but at inference its inputs are constructed from its own imperfect predictions from the earlier steps, something it has never seen at training time. This might be one reason diffusion models often struggle without additional help, such as CFG. We introduce a correction step for diffusion models which attempts to reduce this training-inference gap. The corrector takes the base model's prediction as input and is trained against the same ground-truth target. This makes correction an explicit learning task, with training inputs provided by the base model. During sampling, at each denoising step, we iteratively refine the denoiser's clean-sample prediction. This allows us to correct predictions at intermediate denoising steps, preventing early artifacts from persisting into the final sample. Although the corrector is trained only on predictions from the base denoiser, it can be applied repeatedly to its own outputs at inference for better results. This simple framework leads to substantial improvement in sample quality while largely preserving diversity. We evaluate our method across DiT, SiT, and JiT. Our method substantially improves upon previously reported FID scores for unguided generation and, notably, unconditional generation, where producing high-quality samples without guidance has been particularly challenging. Our method achieves performance competitive with classifier-free guidance (CFG), and combining correction with CFG further improves diversity and reduces oversaturation typical of CFG. Finally, we show that the additional inference cost of correction can be amortized by distilling the refined predictions back into the base diffusion model, retaining the quality gains without additional inference-time overhead.

Vision-Language-Action (VLA) models achieve remarkable flexibility and generalization beyond classical control paradigms. However, most prevailing VLAs are trained under a single-frame observation paradigm, which leaves them structurally blind to temporal dynamics. Consequently, these models degrade severely in non-stationary scenarios, even when trained or finetuned on dynamic datasets. Existing approaches either require expensive retraining or suffer from latency bottlenecks and poor temporal consistency across action chunks. We propose Pace-and-Path Correction, a training-free, closed-form inference-time operator that wraps any chunked-action VLA. From a single quadratic cost, joint minimization yields a unified solution that decomposes orthogonally into two distinct channels. The pace channel compresses execution along the planned direction, while the path channel applies an orthogonal spatial offset, jointly absorbing the perceived dynamics within the chunk window. We evaluate our approach on a comprehensive diagnostic benchmark MoveBench designed to isolate motion as the sole controlled variable. Empirical results demonstrate that our framework consistently outperforms state-of-the-art training-free wrappers and dynamic-adaptive methods and improves success rates by up to 28.8% and 25.9% in absolute terms over foundational VLA models in dynamic-only and static-dynamic mixed environments, respectively.

While large language models (LLMs) have demonstrated remarkable success on a broad range of tasks, math reasoning remains a challenging one. One of the approaches for improving math reasoning is self-correction, which designs self-improving loops to let the model correct its own mistakes. However, existing self-correction approaches treat corrections as standalone post-generation refinements, relying on extra prompt and system designs to elicit self-corrections, instead of performing real-time, spontaneous self-corrections in a single pass. To address this, we propose SPOC, a spontaneous self-correction approach that enables LLMs to generate interleaved solutions and verifications in a single inference pass, with generation dynamically terminated based on verification outcomes, thereby effectively scaling inference time compute. SPOC considers a multi-agent perspective by assigning dual roles -- solution proposer and verifier -- to the same model. We adopt a simple yet effective approach to generate synthetic data for fine-tuning, enabling the model to develop capabilities for self-verification and multi-agent collaboration. We further improve its solution proposal and verification accuracy through online reinforcement learning. Experiments on mathematical reasoning benchmarks show that SPOC significantly improves performance. Notably, SPOC boosts the accuracy of Llama-3.1-8B and 70B Instruct models, achieving gains of 8.8% and 11.6% on MATH500, 10.0% and 20.0% on AMC23, and 3.3% and 6.7% on AIME24, respectively.

Retrieval Augmented Generation (RAG) has emerged as a powerful application of Large Language Models (LLMs), revolutionizing information search and consumption. RAG systems combine traditional search capabilities with LLMs to generate comprehensive answers to user queries, ideally with accurate citations. However, in our experience of developing a RAG product, LLMs often struggle with source attribution, aligning with other industry studies reporting citation accuracy rates of only about 74% for popular generative search engines. To address this, we present efficient post-processing algorithms to improve citation accuracy in LLM-generated responses, with minimal impact on latency and cost. Our approaches cross-check generated citations against retrieved articles using methods including keyword + semantic matching, fine tuned model with BERTScore, and a lightweight LLM-based technique. Our experimental results demonstrate a relative improvement of 15.46% in the overall accuracy metrics of our RAG system. This significant enhancement potentially enables a shift from our current larger language model to a relatively smaller model that is approximately 12x more cost-effective and 3x faster in inference time, while maintaining comparable performance. This research contributes to enhancing the reliability and trustworthiness of AI-generated content in information retrieval and summarization tasks which is critical to gain customer trust especially in commercial products.

Multimodal large language models (MLLMs) often fail to transfer safety capabilities learned in the text modality to semantically equivalent non-text inputs, revealing a persistent multimodal safety gap. We study this gap from a representation-geometric perspective by analyzing a text-aligned refusal direction and a modality-induced drift direction. We show that multimodal inputs compress the usable separation along the refusal direction, making it no longer reliable for identifying and refusing harmful inputs. We refer to this failure mode as Safety Geometry Collapse. We quantify it through conditional refusal separability and show that stronger modality-induced drift is consistently associated with weaker refusal separability and higher attack success rates. We then validate the causal role of modality-induced drift through a fixed-strength activation intervention: counteracting the estimated drift restores refusal separability and improves multimodal safety. After drift correction, we further observe self-rectification, where the model recovers its ability to recognize and refuse harmful multimodal inputs during forward dynamics. This effect also provides an internal signal of the model's perceived harmfulness of each input. Motivated by this signal, we propose ReGap, a training-free inference-time method that adaptively corrects modality drift using self-rectification. Experiments across multiple multimodal safety benchmarks and utility benchmarks demonstrate the effectiveness of ReGap, which significantly improves the safety of MLLMs without compromising general capabilities. Our findings highlight representation-level modality alignment as a crucial direction for real-time safety improvement and for building safer, more reliable MLLMs.

Multi-hop QA benchmarks often reward Large Language Models (LLMs) for spurious correctness, where models reach correct answers through invalid intermediate reasoning. We propose SAFE, an LLM-as-verifier framework for evidence-grounded multi-hop QA. Rather than judging only the final answer after generation, SAFE verifies reasoning during generation by checking intermediate steps against the provided passages and previous reasoning trajectory. To make this process checkable, SAFE decomposes reasoning into atomic, evidence-grounded units represented with Knowledge Graph (KG) triples. At train-time, SAFE verifies benchmark supervision under KG-grounded constraints and constructs reliable verifier training data. At inference-time, an external verifier checks each generated step, identifies invalid reasoning, and provides correction feedback before errors propagate. Across three multi-hop QA benchmarks, SAFE improves accuracy by 8.8 pp on average. These results show that evidence-grounded multi-hop QA benefits from shifting LLM-based evaluation from post-hoc answer judgment to stepwise reasoning verification.

Previous studies have found that PLM-based retrieval models exhibit a preference for LLM-generated content, assigning higher relevance scores to these documents even when their semantic quality is comparable to human-written ones. This phenomenon, known as source bias, threatens the sustainable development of the information access ecosystem. However, the underlying causes of source bias remain unexplored. In this paper, we explain the process of information retrieval with a causal graph and discover that PLM-based retrievers learn perplexity features for relevance estimation, causing source bias by ranking the documents with low perplexity higher. Theoretical analysis further reveals that the phenomenon stems from the positive correlation between the gradients of the loss functions in language modeling task and retrieval task. Based on the analysis, a causal-inspired inference-time debiasing method is proposed, called Causal Diagnosis and Correction (CDC). CDC first diagnoses the bias effect of the perplexity and then separates the bias effect from the overall estimated relevance score. Experimental results across three domains demonstrate the superior debiasing effectiveness of CDC, emphasizing the validity of our proposed explanatory framework. Source codes are available at https://github.com/WhyDwelledOnAi/Perplexity-Trap.

We investigate whether independently trained language models converge to geometrically compatible latent representations, and whether this compatibility can be exploited to correct model behavior at inference time without any weight updates. We learn a linear projection matrix that maps activation vectors from a large teacher model into the coordinate system of a smaller student model, then intervene on the student's residual stream during generation by substituting its internal state with the translated teacher representation. Across a fully crossed experimental matrix of 20 heterogeneous teacher-student pairings spanning mixture-of-experts, dense, code-specialized, and synthetically trained architectures, the Ridge projection consistently achieves R^2 = 0.50 on verbal reasoning and R^2 = 0.40 on mathematical reasoning, collapsing to R^2 = -0.22 under permutation control and R^2 = 0.01 under L_1 regularization. Behavioral correction rates range from 14.0% to 50.0% on TruthfulQA (mean 25.2%) and from 8.5% to 43.3% on GSM8K arithmetic reasoning (mean 25.5%), demonstrating that the method generalizes across fundamentally different reasoning domains. We report a near-zero correlation between geometric alignment quality and behavioral correction rate (r = -0.07), revealing a dissociation between representation space fidelity and output space impact. Intervention strength is architecture-specific: student models exhibit characteristic sensitivity profiles that invert across domains, with the most steerable verbal student becoming the least steerable mathematical student. Finally, a double dissociation experiment conducted across all 20 model pairings confirms without exception that projection matrices collapse catastrophically when transferred across reasoning domains (mean R^2 = -3.83 in both transfer directions), establishing domain-specific subspace geometry as a universal property of LMs.

While text-to-3D generation has advanced rapidly, achieving high geometric fidelity at low inference cost remains challenging. Existing text-to-3D methods either decode discrete shape tokens autoregressively or iteratively refine global 3D representations with diffusion or flow models. However, autoregressive decoding is sequential and cannot revise errors, whereas diffusion and flow-matching models repeatedly process the full representation, making high-quality generation increasingly expensive. In this paper, we propose Block3D, a block-wise diffusion framework that partitions the discrete shape-token sequence into contiguous blocks, generates the blocks autoregressively, and jointly denoises all tokens within the current block. To alleviate error accumulation, we introduce confidence-guided intra-block correction, which revises low-confidence tokens before each block is finalized. On a held-out set from TRELLIS-500K, Block3D reduces mean end-to-end generation time from 25.71 seconds to 4.99 seconds, achieving a 5.15times speedup over the fine-tuned autoregressive baseline without sacrificing geometric fidelity.

Neuro-symbolic systems aim to combine the expressive structure of symbolic logic with the flexibility of neural learning; yet, generative models typically lack mechanisms to enforce declarative constraints at generation time. We propose Logic-Guided Vector Fields (LGVF), a neuro-symbolic framework that injects symbolic knowledge, specified as differentiable relaxations of logical constraints, into flow matching generative models. LGVF couples two complementary mechanisms: (1) a training-time logic loss that penalizes constraint violations along continuous flow trajectories, with weights that emphasize correctness near the target distribution; and (2) an inference-time adjustment that steers sampling using constraint gradients, acting as a lightweight, logic-informed correction to the learned dynamics. We evaluate LGVF on three constrained generation case studies spanning linear, nonlinear, and multi-region feasibility constraints. Across all settings, LGVF reduces constraint violations by 59-82% compared to standard flow matching and achieves the lowest violation rates in each case. In the linear and ring settings, LGVF also improves distributional fidelity as measured by MMD, while in the multi-obstacle setting, we observe a satisfaction-fidelity trade-off, with improved feasibility but increased MMD. Beyond quantitative gains, LGVF yields constraint-aware vector fields exhibiting emergent obstacle-avoidance behavior, routing samples around forbidden regions without explicit path planning.

This work characterizes large language models' chain-of-thought generation as a structured trajectory through representation space. We show that mathematical reasoning traverses functionally ordered, step-specific subspaces that become increasingly separable with layer depth. This structure already exists in base models, while reasoning training primarily accelerates convergence toward termination-related subspaces rather than introducing new representational organization. While early reasoning steps follow similar trajectories, correct and incorrect solutions diverge systematically at late stages. This late-stage divergence enables mid-reasoning prediction of final-answer correctness with ROC-AUC up to 0.87. Furthermore, we introduce trajectory-based steering, an inference-time intervention framework that enables reasoning correction and length control based on derived ideal trajectories. Together, these results establish reasoning trajectories as a geometric lens for interpreting, predicting, and controlling LLM reasoning behavior.

Diffusion models are a powerful generative framework, but come with expensive inference. Existing acceleration methods often compromise image quality or fail under complex conditioning when operating in an extremely low-step regime. In this work, we propose a novel distillation framework tailored to enable high-fidelity, diverse sample generation using just one to three steps. Our approach comprises three key components: (i) Backward Distillation, which mitigates training-inference discrepancies by calibrating the student on its own backward trajectory; (ii) Shifted Reconstruction Loss that dynamically adapts knowledge transfer based on the current time step; and (iii) Noise Correction, an inference-time technique that enhances sample quality by addressing singularities in noise prediction. Through extensive experiments, we demonstrate that our method outperforms existing competitors in quantitative metrics and human evaluations. Remarkably, it achieves performance comparable to the teacher model using only three denoising steps, enabling efficient high-quality generation.

As Large Language Models (LLMs) become increasingly integrated into real-world applications, ensuring their outputs align with human values and safety standards has become critical. The field has developed diverse alignment approaches including traditional fine-tuning methods (RLHF, instruction tuning), post-hoc correction systems, and inference-time interventions, each with distinct advantages and limitations. However, the lack of unified evaluation frameworks makes it difficult to systematically compare these paradigms and guide deployment decisions. This paper introduces a multi-dimensional evaluation of alignment techniques for LLMs, a comprehensive evaluation framework that provides a systematic comparison across all major alignment paradigms. Our framework assesses methods along four key dimensions: alignment detection, alignment quality, computational efficiency, and robustness. Through experiments across diverse base models and alignment strategies, we demonstrate the utility of our framework in identifying strengths and limitations of current state-of-the-art models, providing valuable insights for future research directions.

Conditional diffusion and flow models routinely fail to satisfy the very constraints that define their task. For instance, a depth-conditioned model often produces images whose re-extracted depth disagrees with the input, even though the forward operator--the depth predictor defining the constraint--is available during both training and inference. Existing approaches generally fall into two categories: supervised models that treat the conditioning signal as a static cue and ignore alignment information at inference, and guidance-based methods that consult it through hand-tuned linear updates, typically trading fidelity to the condition against the plausibility of the generated sample. We argue that the fundamental gap in both paradigms is that the model is never trained to utilize its own alignment error. We introduce FlowBender, a closed-loop framework that treats this error as a first-class input, training the network to learn a correction policy conditioned on inference-time feedback. At each step, an unguided look-ahead pass estimates the clean signal, a task-specific deviation is computed via the forward operator, and a refinement pass consumes this signal to produce a corrected velocity. We propose several variants of FlowBender, including a gradient-based formulation for differentiable operators and a zero-order variant for non-differentiable settings such as JPEG compression. For efficient sampling, we introduce a prior-step shortcut that enables closed-loop correction at a minimal additional computational cost. Across image-to-image translation, restoration, and 3D mesh texturing, FlowBender consistently outperforms standard supervised baselines, alignment-loss-augmented training, and state-of-the-art inference-time guidance, improving fidelity and plausibility simultaneously rather than trading them against each other. Project page: https://flow-bender.github.io/

Sparse Mixture of Experts (MoE) models, while outperforming dense Large Language Models (LLMs) in terms of performance, face significant deployment challenges during inference due to their high memory demands. Existing offloading techniques, which involve swapping activated and idle experts between the GPU and CPU, often suffer from rigid expert caching mechanisms. These mechanisms fail to adapt to dynamic routing, leading to inefficient cache utilization, or incur prohibitive costs for prediction training. To tackle these inference-specific challenges, we introduce ExpertFlow, a comprehensive system specifically designed to enhance inference efficiency by accommodating flexible routing and enabling efficient expert scheduling between CPU and GPU. This reduces overhead and boosts system performance. Central to our approach is a predictive routing path-based offloading mechanism that utilizes a lightweight predictor to accurately forecast routing paths before computation begins. This proactive strategy allows for real-time error correction in expert caching, significantly increasing cache hit ratios and reducing the frequency of expert transfers, thereby minimizing I/O overhead. Additionally, we implement a dynamic token scheduling strategy that optimizes MoE inference by rearranging input tokens across different batches. This method not only reduces the number of activated experts per batch but also improves computational efficiency. Our extensive experiments demonstrate that ExpertFlow achieves up to 93.72\% GPU memory savings and enhances inference speed by 2 to 10 times compared to baseline methods, highlighting its effectiveness and utility as a robust solution for resource-constrained inference scenarios.

The attention mechanism of a transformer has a quadratic complexity, leading to high inference costs and latency for long sequences. However, attention matrices are mostly sparse, which implies that many entries may be omitted from computation for efficient inference. Sparse attention inference methods aim to reduce this computational burden; however, they also come with a troublesome performance degradation. We discover that one reason for this degradation is that the sparse calculation induces a distributional shift in the attention outputs. The distributional shift causes decoding-time queries to fail to align well with the appropriate keys from the prefill stage, leading to a drop in performance. We propose a simple, novel, and effective procedure for correcting this distributional shift, bringing the distribution of sparse attention outputs closer to that of quadratic attention. Our method can be applied on top of any sparse attention method, and results in an average 36%pt performance increase, recovering 88% of quadratic attention accuracy on the 131K RULER benchmark when applied on top of sliding window attention with sink tokens while only adding a small overhead. Our method can maintain approximately 98.5% sparsity over full quadratic attention, making our model 32 times faster than Flash Attention 2 when processing 1M token prefills.

Modern deep-learning models have achieved remarkable success in time-series forecasting. Yet, their performance degrades in long-term prediction due to error accumulation in autoregressive inference, where predictions are recursively used as inputs. While classical error correction mechanisms (ECMs) have long been used in statistical methods, their applicability to deep learning models remains limited or ineffective. In this work, we revisit the error accumulation problem in deep time-series forecasting and investigate the role and necessity of ECMs in this new context. We propose a simple, architecture-agnostic error correction model that can be integrated with any existing forecaster without requiring retraining. By explicitly decomposing predictions into trend and seasonal components and training the corrector to adjust each separately, we introduce the Universal Error Corrector with Seasonal-Trend Decomposition (UEC-STD), which significantly improves correction accuracy and robustness across 4 backbones and 10 datasets. Our findings provide a practical tool for enhancing forecasts while offering new insights into mitigating autoregressive errors in deep time-series models. Code is available at https://github.com/DA2I2-SLM/UEC-STD.

Remote inference allows lightweight devices to leverage powerful cloud models. However, communication network latency makes predictions stale and unsuitable for real-time tasks. To address this, we introduce Dedelayed, a delay-corrective method that mitigates arbitrary remote inference delays, allowing the local device to produce low-latency outputs in real time. Our method employs a lightweight local model that processes the current frame and fuses in features that a heavyweight remote model computes from past frames. On video from the BDD100K driving dataset, Dedelayed improves semantic segmentation accuracy over the stronger of the local-only and remote-only baselines across all realistic communication network delays beyond 33 ms. Without incurring additional delay, it improves accuracy by 6.4 mIoU compared to fully local inference and 9.8 mIoU compared to remote inference, for a round-trip delay of 100 ms. The advantage grows under longer delays and higher-motion scenes, as delay-mitigated split inference sustains accuracy more effectively, providing clear advantages for real-time tasks that must remain aligned with the current world state.

Vision-Language-Action (VLA) models have achieved impressive performance on diverse embodied tasks. However, deploying VLA models on low-power onboard devices, such as the Jetson Orin, remains challenging due to their high computational complexity, which leads to substantial inference latency and low control frequency. Asynchronous inference can partially mask this latency by parallelizing action execution and subsequent inference, but it introduces two critical issues: perception-execution misalignment and long reaction time. In this paper, we propose Jetson-PI, a method for efficient VLA deployment on onboard devices via Foresight-Aligned Asynchronous Correction. To address misalignment, we train a lightweight future correction module that predicts future environment representation conditioned on committed actions, enabling the action expert to directly predict actions from the future time step. To reduce reaction time, we introduce confidence-based scheduling optimization that adaptively balances VLM and action expert invocations, complemented by system-level accelerations including CUDA graph reuse, GPU-resident intermediate buffering, and flow unrolling. Extensive experiments demonstrate that Jetson-PI achieves 8.66x and 5.41x improvements in control frequency compared with naive PyTorch and vla.cpp on NVIDIA Jetson Orin, while outperforming VLASH by 14.8\% in average success rate on the LIBERO benchmark. The code of our asynchronous algorithm is available on https://github.com/PKU-SEC-Lab/Jetson-PI, and our efficient llama.cpp-based inference engine is available on https://github.com/PKU-SEC-Lab/Jetson-PI-Edge.

Self-awareness, i.e., the ability to assess and correct one's own generation, is a fundamental aspect of human intelligence, making its replication in large language models (LLMs) an important yet challenging task. Previous works tackle this by employing extensive reinforcement learning or rather relying on large external verifiers. In this work, we propose Refine via Intrinsic Self-Verification (ReVISE), an efficient and effective framework that enables LLMs to self-correct their outputs through self-verification. The core idea of ReVISE is to enable LLMs to verify their reasoning processes and continually rethink reasoning trajectories based on its verification. We introduce a structured curriculum based upon online preference learning to implement this efficiently. Specifically, as ReVISE involves two challenging tasks (i.e., self-verification and reasoning correction), we tackle each task sequentially using curriculum learning, collecting both failed and successful reasoning paths to construct preference pairs for efficient training. During inference, our approach enjoys natural test-time scaling by integrating self-verification and correction capabilities, further enhanced by our proposed confidence-aware decoding mechanism. Our experiments on various reasoning tasks demonstrate that ReVISE achieves efficient self-correction and significantly improves reasoning performance.

Deploying massive diffusion models for real-time, infinite-duration, audio-driven avatar generation presents a significant engineering challenge, primarily due to the conflict between computational load and strict latency constraints. Existing approaches often compromise visual fidelity by enforcing strictly unidirectional attention mechanisms or reducing model capacity. To address this problem, we introduce SoulX-FlashTalk, a 14B-parameter framework optimized for high-fidelity real-time streaming. Diverging from conventional unidirectional paradigms, we use a Self-correcting Bidirectional Distillation strategy that retains bidirectional attention within video chunks. This design preserves critical spatiotemporal correlations, significantly enhancing motion coherence and visual detail. To ensure stability during infinite generation, we incorporate a Multi-step Retrospective Self-Correction Mechanism, enabling the model to autonomously recover from accumulated errors and preventing collapse. Furthermore, we engineered a full-stack inference acceleration suite incorporating hybrid sequence parallelism, Parallel VAE, and kernel-level optimizations. Extensive evaluations confirm that SoulX-FlashTalk is the first 14B-scale system to achieve a sub-second start-up latency (0.87s) while reaching a real-time throughput of 32 FPS, setting a new standard for high-fidelity interactive digital human synthesis.

Text-to-image retrieval with frozen dual encoders degrades when the query names a small, visually subordinate object in a cluttered scene: a single global image embedding underrepresents the localized visual evidence. We present MINER, a training-free inference framework that augments a frozen dual encoder's global image embedding with a small bank of region-level embeddings and a hubness-correcting similarity rescoring, recovering visual evidence that global pooling underweights. To evaluate this setting, we introduce ROCS, a benchmark built from high-clutter subsets of Flickr30K and MS COCO whose images are re-captioned to name a single low-salience object. Experiments on CLIP, SigLIP, and SigLIP 2 show that MINER improves retrieval on every backbone, on ROCS and on the standard splits. Analyses show that these gains come primarily from broader spatial coverage rather than precise crop placement, revealing a simple and general way to recover localized evidence from frozen representations. Code: https://github.com/aalquwayfili/MINER. Dataset: https://huggingface.co/datasets/aalquwayfili/ROCS.

Diffusion models have shown impressive results in generating high-quality conditional samples using guidance techniques such as Classifier-Free Guidance (CFG). However, existing methods often require additional training or neural function evaluations (NFEs), making them incompatible with guidance-distilled models. Also, they rely on heuristic approaches that need identifying target layers. In this work, we propose a novel and efficient method, termed PLADIS, which boosts pre-trained models (U-Net/Transformer) by leveraging sparse attention. Specifically, we extrapolate query-key correlations using softmax and its sparse counterpart in the cross-attention layer during inference, without requiring extra training or NFEs. By leveraging the noise robustness of sparse attention, our PLADIS unleashes the latent potential of text-to-image diffusion models, enabling them to excel in areas where they once struggled with newfound effectiveness. It integrates seamlessly with guidance techniques, including guidance-distilled models. Extensive experiments show notable improvements in text alignment and human preference, offering a highly efficient and universally applicable solution.

Large Language Models (LLMs) often struggle with producing factually consistent answers due to limitations in their parametric memory. Retrieval-Augmented Generation (RAG) paradigms mitigate this issue by incorporating external knowledge at inference time. However, such methods typically handle knowledge as unstructured text, which reduces retrieval accuracy, hinders compositional reasoning, and amplifies the influence of irrelevant information on the factual consistency of LLM outputs. To overcome these limitations, we propose a novel framework that dynamically constructs and expands knowledge graphs (KGs) during inference, integrating both internal knowledge extracted from LLMs and external knowledge retrieved from external sources. Our method begins by extracting a seed KG from the question via prompting, followed by iterative expansion using the LLM's internal knowledge. The KG is then selectively refined through external retrieval, enhancing factual coverage and correcting inaccuracies. We evaluate our approach on three diverse Factual QA benchmarks, demonstrating consistent gains in factual accuracy over baselines. Our findings reveal that inference-time KG construction is a promising direction for enhancing LLM factuality in a structured, interpretable, and scalable manner.

Part of the success of diffusion models stems from their ability to perform iterative refinement, i.e., repeatedly correcting outputs during generation. However, modern masked discrete diffusion lacks this capability: when a token is generated, it cannot be updated again, even when it introduces an error. Here, we address this limitation by introducing the remasking diffusion model (ReMDM) sampler, a method that can be applied to pretrained masked diffusion models in a principled way and that is derived from a discrete diffusion model with a custom remasking backward process. Most interestingly, ReMDM endows discrete diffusion with a form of inference-time compute scaling. By increasing the number of sampling steps, ReMDM generates natural language outputs that approach the quality of autoregressive models, whereas when the computation budget is limited, ReMDM better maintains quality. ReMDM also improves sample quality of masked diffusion models for discretized images, and in scientific domains such as molecule design, ReMDM facilitates diffusion guidance and pushes the Pareto frontier of controllability relative to classical masking and uniform noise diffusion. We provide the code along with a blog post on the project page: https://remdm.github.io.

While score-based generative models are the model of choice across diverse domains, there are limited tools available for controlling inference-time behavior in a principled manner, e.g. for composing multiple pretrained models. Existing classifier-free guidance methods use a simple heuristic to mix conditional and unconditional scores to approximately sample from conditional distributions. However, such methods do not approximate the intermediate distributions, necessitating additional 'corrector' steps. In this work, we provide an efficient and principled method for sampling from a sequence of annealed, geometric-averaged, or product distributions derived from pretrained score-based models. We derive a weighted simulation scheme which we call Feynman-Kac Correctors (FKCs) based on the celebrated Feynman-Kac formula by carefully accounting for terms in the appropriate partial differential equations (PDEs). To simulate these PDEs, we propose Sequential Monte Carlo (SMC) resampling algorithms that leverage inference-time scaling to improve sampling quality. We empirically demonstrate the utility of our methods by proposing amortized sampling via inference-time temperature annealing, improving multi-objective molecule generation using pretrained models, and improving classifier-free guidance for text-to-image generation. Our code is available at https://github.com/martaskrt/fkc-diffusion.

Koopman representations aim to learn features of nonlinear dynamical systems (NLDS) which lead to linear dynamics in the latent space. Theoretically, such features can be used to simplify many problems in modeling and control of NLDS. In this work we study autoencoder formulations of this problem, and different ways they can be used to model dynamics, specifically for future state prediction over long horizons. We discover several limitations of predicting future states in the latent space and propose an inference-time mechanism, which we refer to as Periodic Reencoding, for faithfully capturing long term dynamics. We justify this method both analytically and empirically via experiments in low and high dimensional NLDS.

Omnimodal large language models (OLLMs) are susceptible to cross-modal hallucinations under audio-visual interference. We find that, for a substantial fraction of incorrect joint predictions, the question-relevant unimodal branch can still recover the correct answer, suggesting that task-relevant evidence can remain recoverable from the relevant modality even when it is not reflected in the joint prediction. We refer to this recoverable failure pattern as modality misrouting. We propose CaRe (Conflict-aware Residual Intervention), a training-free inference-time method for identifying and correcting modality misrouting. CaRe uses a text-only modality probe to identify a candidate modality-specific counterfactual branch, and flags potential misrouting when its prediction conflicts with the original joint prediction. For such cases, CaRe computes a residual direction from the discrepancy between the counterfactual and fused representations and uses it to steer the original multimodal state toward the relevant modality evidence, while retaining both modalities in the original audio-visual inference path. The intervention strength is adapted based on the confidence of the counterfactual branch. Experiments on CMM and AVHBench across two OLLMs show that CaRe consistently outperforms the evaluated inference-time hallucination-mitigation baselines.

Skip connections are fundamental architecture designs for modern deep neural networks (DNNs) such as CNNs and ViTs. While they help improve model performance significantly, we identify a vulnerability associated with skip connections to Model Inversion (MI) attacks, a type of privacy attack that aims to reconstruct private training data through abusive exploitation of a model. In this paper, as a pioneer work to understand how DNN architectures affect MI, we study the impact of skip connections on MI. We make the following discoveries: 1) Skip connections reinforce MI attacks and compromise data privacy. 2) Skip connections in the last stage are the most critical to attack. 3) RepVGG, an approach to remove skip connections in the inference-time architectures, could not mitigate the vulnerability to MI attacks. 4) Based on our findings, we propose MI-resilient architecture designs for the first time. Without bells and whistles, we show in extensive experiments that our MI-resilient architectures can outperform state-of-the-art (SOTA) defense methods in MI robustness. Furthermore, our MI-resilient architectures are complementary to existing MI defense methods. Our project is available at https://Pillowkoh.github.io/projects/RoLSS/

Large Language Model (LLM) agents are increasingly deployed for complex, multi-step software engineering (SWE) tasks. However, their trajectories often contain costly inefficiencies, such as redundant exploration, looping, and failure to terminate once a solution is reached. Prior work has largely treated these errors in a post-hoc manner, diagnosing failures only after execution. In this paper, we introduce SWE-PRM, an inference-time Process Reward Model (PRM) that intervenes during execution to detect and course-correct trajectory-level errors. Our PRM design leverages a taxonomy of common inefficiencies and delivers lightweight, interpretable feedback without modifying the underlying policy. On SWE-bench Verified, closed-source PRMs improve resolution from 40.0% to 50.6% (+10.6 p.p.), with the largest gains on medium and hard tasks. Among feedback strategies, taxonomy-guided PRMs outperform unguided or explicit action-prescriptive variants, increasing success rate while reducing trajectory length. These benefits come at an acceptable added inference cost of as low as $0.2, making PRMs a practical and scalable mechanism for improving SWE agents' reliability and efficiency.

While large language models (LLMs) promise to revolutionize automated scientific discovery, their application in rigorous real-world physical research is stalled by two critical barriers: a lack of realistic evaluation benchmarks and systemic LLM hallucinations. Here, we address both problems. We introduce QMP-Bench, a pioneering end-to-end research-level benchmark in quantum many-body simulation consisting of 100 tasks extracted from 21 high-impact prestigious journals, presenting a challenge even for current frontier LLMs. To establish a paradigm for reliable and transparent AI physicists, we present PhysVEC, a multi-agent framework that enforces self-verifiable and error correction in AI research. PhysVEC seamlessly integrates programming and scientific verifiers to guarantee coding correctness and principle-based physical validity, yielding interpretable evidence and error correction at each step. PhysVEC significantly outperforms existing LLM baselines on various scenarios in QMP-Bench and presents a favorable inference-time scaling, successfully transforming unreliable AI generations into accurate physical reproductions, paving a robust and trustworthy path towards future automated scientific discovery.

Modern autoregressive ASR systems can emit timestamps as decoded tokens, enabling timestamped transcription without frame-level aligners or inference-time post-processing. We show that these generated timestamps can drift across long non-speech spans: the transcript may remain plausible, but the decoded time axis drifts away from the audio. We study this non-speech-induced timestamp drift with self-built gap and long-gap benchmarks across 15 evaluated timestamp-producing ASR and audio-language systems. Naive timestamp-corrected fine-tuning improves alignment but can severely degrade non-target ASR behavior, exposing a forgetting problem. We propose REDDIT(REplay-based Distribution eDITing), a lightweight two-stage post-training framework that corrects timestamps while avoiding this catastrophic forgetting: it first edits timestamp targets under the model's own replayed decoder context while matching the frozen base distribution on non-timestamp tokens, then applies a short edited-prefix refinement stage. In this framework, we construct correction supervision without human transcripts or human timestamp annotations by combining VAD-trimmed speech spans with inserted non-speech gaps and known concatenation offsets. On Whisper-tiny, 34.9 hours of targeted correction audio used and only 1.6% of model parameters updated, raising long-gap mIoU from 38.7% to 95.0% and reducing mixed-gap out-of-domain AAS from 2752 ms to 223 ms while preserving CV-en MER at 41.3% (versus 524.2% for ordinary SFT decoder tuning).

Masked diffusion models (MDMs) have emerged as a promising alternative to autoregressive models, enabling parallel token generation while achieving competitive performance. Despite these advantages, MDMs face a fundamental limitation: once tokens are unmasked, they remain fixed, leading to error accumulation and ultimately degrading sample quality. We address this by proposing a framework that trains a model to perform both unmasking and correction. By reusing outputs from the MDM denoising network as inputs for corrector training, we train a model to recover from potential mistakes. During generation we apply additional corrective refinement steps between unmasking ones in order to change decoded tokens and improve outputs. We name our training and sampling method Progressive Self-Correction (ProSeCo) for its unique ability to iteratively refine an entire sequence, including already generated tokens. We conduct extensive experimental validation across multiple conditional and unconditional tasks, demonstrating that ProSeCo yields better quality-efficiency trade-offs (up to ~2-3x faster sampling) and enables inference-time compute scaling to further increase sample quality beyond standard MDMs (up to ~1.3x improvement on benchmarks).

Large language models (LLMs) use data to learn about the world in order to produce meaningful correlations and predictions. As such, the nature, scale, quality, and diversity of the datasets used to train these models, or to support their work at inference time, have a direct impact on their quality. The rapid development and adoption of LLMs of varying quality has brought into focus the scarcity of publicly available, high-quality training data and revealed an urgent need to ground the stewardship of these datasets in sustainable practices with clear provenance chains. To that end, this technical report introduces Institutional Books 1.0, a large collection of public domain books originally digitized through Harvard Library's participation in the Google Books project, beginning in 2006. Working with Harvard Library, we extracted, analyzed, and processed these volumes into an extensively-documented dataset of historic texts. This analysis covers the entirety of Harvard Library's collection scanned as part of that project, originally spanning 1,075,899 volumes written in over 250 different languages for a total of approximately 250 billion tokens. As part of this initial release, the OCR-extracted text (original and post-processed) as well as the metadata (bibliographic, source, and generated) of the 983,004 volumes, or 242B tokens, identified as being in the public domain have been made available. This report describes this project's goals and methods as well as the results of the analyses we performed, all in service of making this historical collection more accessible and easier for humans and machines alike to filter, read and use.

Sparse Autoencoders (SAEs) can extract interpretable features from large language models (LLMs) without supervision. However, their effectiveness in downstream steering tasks is limited by the requirement for contrastive datasets or large activation storage. To address these limitations, we propose CorrSteer, which selects features by correlating sample correctness with SAE activations from generated tokens at inference time. This approach uses only inference-time activations to extract more relevant features, thereby avoiding spurious correlations. It also obtains steering coefficients from average activations, automating the entire pipeline. Our method shows improved task performance on QA, bias mitigation, jailbreaking prevention, and reasoning benchmarks on Gemma 2 2B and LLaMA 3.1 8B, notably achieving a +4.1% improvement in MMLU performance and a +22.9% improvement in HarmBench with only 4000 samples. Selected features demonstrate semantically meaningful patterns aligned with each task's requirements, revealing the underlying capabilities that drive performance. Our work establishes correlationbased selection as an effective and scalable approach for automated SAE steering across language model applications.

Vision-language action (VLA) models increasingly adopt chunked action heads to satisfy real-time constraints; however, this introduces boundary jitter: overlapping regions between consecutive chunks often yield inconsistent predictions, degrading temporal coherence and the task success rate. Existing methods, such as inference-time blending, merely reweight mismatched proposals without correcting underlying errors, leading to residual accumulation under biased or noisy histories. We propose ChunkFlow, a seam-aware training-and-execution framework for chunked policies that aligns chunk structure with boundary execution. It partitions each chunk into frozen, editable, and future zones, applies deterministic overlap blending at execution, and trains raw predictions with seam and first- and second-order continuity losses. History corruption and scheduled sampling improve robustness to executed-history errors, while an AWAC fine-tuning stage adapts the policy without removing these structural regularizers. Under mild smoothness assumptions, pre-blending seam discrepancies provably decay with increasing overlap. Experiments on CALVIN, LIBERO, and real robots show an improved success-stability trade-off with low-latency inference. Project page: https://cytoderm-ai.github.io/chunkflow.

Inference-time control steers a pretrained generative model towards a target distribution without retraining. We study tilted targets π_0propto G_0,p_0, where p_0 is the sampler output distribution and G_0 is an evaluable reweighting function. Existing approaches rely on sequential annealing with sequential Monte Carlo (SMC) or parallel annealing with replica exchange (RE). Sequential control is exact but needs large particle populations, whereas no exact parallel control method exists: existing RE corrections approximate an intractable time reversal and are biased. We propose Exact Non-equilibrium COntrol with Replica Exchange (ENCORE), the first exact parallel control method. Each replica stores its generation trajectory, so the upward move is a truncation and the intractable time reversal is never simulated. We prove target invariance and show that the resulting dynamics are those of non-equilibrium replica exchange with the exact time reversal as forward proposal. Under regularity conditions, our diffusion analysis shows that both sequential and parallel control become unstable under refinement of the time discretisation without guidance, whereas guided proposals remain stable and yield diagnostics for tuning the schedule and the computational budget. Across synthetic targets, Boltzmann sampling of biomolecules, and image generation, ENCORE achieves competitive accuracy and diversity, remains robust to sampler perturbations, and applies to distilled samplers where existing RE corrections are unavailable.

Designing efficient neural networks for embedded devices is a critical challenge, particularly in applications requiring real-time performance, such as aerial imaging with drones and UAVs for emergency responses. In this work, we introduce TakuNet, a novel light-weight architecture which employs techniques such as depth-wise convolutions and an early downsampling stem to reduce computational complexity while maintaining high accuracy. It leverages dense connections for fast convergence during training and uses 16-bit floating-point precision for optimization on embedded hardware accelerators. Experimental evaluation on two public datasets shows that TakuNet achieves near-state-of-the-art accuracy in classifying aerial images of emergency situations, despite its minimal parameter count. Real-world tests on embedded devices, namely Jetson Orin Nano and Raspberry Pi, confirm TakuNet's efficiency, achieving more than 650 fps on the 15W Jetson board, making it suitable for real-time AI processing on resource-constrained platforms and advancing the applicability of drones in emergency scenarios. The code and implementation details are publicly released.

Recent developments in large language models have shown advantages in reallocating a notable share of computational resource from training time to inference time. However, the principles behind inference time scaling are not well understood. In this paper, we introduce an analytically tractable model of inference-time scaling: Bayesian linear regression with a reward-weighted sampler, where the reward is determined from a linear model, modeling LLM-as-a-judge scenario. We study this problem in the high-dimensional regime, where the deterministic equivalents dictate a closed-form expression for the posterior predictive mean and variance. We analyze the generalization error when training data are sampled from a teacher model. We draw k inference-time samples and select via softmax at a temperature applied to a quadratic reward. When the reward is not too different from the teacher, the generalization error decreases monotonically with increasing inference time samples k. However, the specific reward that optimizes inference-time selection generally differs from the teacher. In contrast, substantial reward misspecification induces a finite optimal k beyond which more sampling can increase the generalization error. For fixed k, there exists an optimal sampling temperature. We experimentally verify these facts in large language model inference with an additional large language model as a judge. In the "best-of-k" limit with the teacher as reward, we theoretically show that the generalization error decays as Θ(1/k^2) and determine the leading coefficient via extreme value theory. These formulas delineate domains where scaling inference-time computation is provably preferable to collecting more data. Finally, we demonstrate that when task difficulty increases, the previously mentioned advantage of inference-time compute degrades.

With the advancement of large language models (LLMs), solving complex reasoning tasks has gained increasing attention. Inference-time computation methods (e.g., Best-of-N, beam search, et al.) are particularly valuable as they can enhance reasoning performance without modifying model parameters or requiring additional training. However, these techniques come with implementation challenges, and most existing methods remain at the proof-of-concept stage with limited practical adoption due to their computational complexity and varying effectiveness across different tasks. In this paper, we investigate and benchmark diverse inference-time computation strategies across reasoning tasks of varying complexity. Since most current methods rely on a proposer-verifier pipeline that first generates candidate solutions (e.g., reasoning solutions) and then selects the best one based on reward signals (e.g., RLHF rewards, process rewards), our research focuses on optimizing both candidate solution generation (e.g., instructing prompts, hyperparameters such as temperature and top-p) and reward mechanisms (e.g., self-evaluation, reward types). Through extensive experiments (more than 20,000 A100-80G GPU hours with over 1,000 experiments) across a variety of models (e.g., Llama, Qwen, and Mistral families) of various sizes, our ablation studies reveal that previously overlooked strategies can significantly enhance performance (e.g., tuning temperature can improve reasoning task performance by up to 5%). Furthermore, we establish a standardized benchmark for inference-time computation by systematically evaluating six representative methods across eight reasoning tasks. These findings provide a stronger foundation for future research. The code is available at https://github.com/usail-hkust/benchmark_inference_time_computation_LLM

Inference-time techniques are emerging as highly effective tools to enhance large language model (LLM) capabilities. However, best practices for developing systems that combine these techniques remain underdeveloped due to our limited understanding of the utility of individual inference-time techniques and the interactions between them. Additionally, efficiently and automatically searching the space of model choices, inference-time techniques, and their compositions is challenging due to the large design space. To address these challenges, we introduce Archon, a modular framework for selecting, combining, and stacking layers of inference-time techniques to construct optimized LLM systems for target benchmarks. Rather than relying on a single LLM called once, we leverage a diverse set of LLMs and inference-time techniques, creating LLM systems greater than the sum of their parts. Archon defines an extensible design space, encompassing techniques such as generation ensembling, repeated sampling, ranking, fusion, critiquing, verification, and unit testing. It transforms the problem of building LLM systems into a hyperparameter optimization objective. Given the available LLMs, inference-time techniques, and compute budget, Archon utilizes hyperparameter search techniques to discover optimized architectures for target benchmark(s). We evaluate Archon architectures across a range of instruction-following, reasoning, and coding benchmarks, including MT-Bench, Arena-Hard-Auto, AlpacaEval 2.0, MixEval, MixEval Hard, MATH, and CodeContests. Archon architectures outperform frontier models, such as GPT-4o and Claude 3.5 Sonnet, on these benchmarks, achieving an average accuracy increase of 15.1 percentage points by using all available LLMs. We make our code and datasets available publicly on Github: https://github.com/ScalingIntelligence/Archon.

Inference-time scaling can enhance the reasoning capabilities of large language models (LLMs) on complex problems that benefit from step-by-step problem solving. Although lengthening generated scratchpads has proven effective for mathematical tasks, the broader impact of this approach on other tasks remains less clear. In this work, we investigate the benefits and limitations of scaling methods across nine state-of-the-art models and eight challenging tasks, including math and STEM reasoning, calendar planning, NP-hard problems, navigation, and spatial reasoning. We compare conventional models (e.g., GPT-4o) with models fine-tuned for inference-time scaling (e.g., o1) through evaluation protocols that involve repeated model calls, either independently or sequentially with feedback. These evaluations approximate lower and upper performance bounds and potential for future performance improvements for each model, whether through enhanced training or multi-model inference systems. Our extensive empirical analysis reveals that the advantages of inference-time scaling vary across tasks and diminish as problem complexity increases. In addition, simply using more tokens does not necessarily translate to higher accuracy in these challenging regimes. Results from multiple independent runs with conventional models using perfect verifiers show that, for some tasks, these models can achieve performance close to the average performance of today's most advanced reasoning models. However, for other tasks, a significant performance gap remains, even in very high scaling regimes. Encouragingly, all models demonstrate significant gains when inference is further scaled with perfect verifiers or strong feedback, suggesting ample potential for future improvements.

We examine the reasoning and planning capabilities of large language models (LLMs) in solving complex tasks. Recent advances in inference-time techniques demonstrate the potential to enhance LLM reasoning without additional training by exploring intermediate steps during inference. Notably, OpenAI's o1 model shows promising performance through its novel use of multi-step reasoning and verification. Here, we explore how scaling inference-time techniques can improve reasoning and planning, focusing on understanding the tradeoff between computational cost and performance. To this end, we construct a comprehensive benchmark, known as Sys2Bench, and perform extensive experiments evaluating existing inference-time techniques on eleven diverse tasks across five categories, including arithmetic reasoning, logical reasoning, common sense reasoning, algorithmic reasoning, and planning. Our findings indicate that simply scaling inference-time computation has limitations, as no single inference-time technique consistently performs well across all reasoning and planning tasks.

We introduce Inference-Time Intervention (ITI), a technique designed to enhance the truthfulness of large language models (LLMs). ITI operates by shifting model activations during inference, following a set of directions across a limited number of attention heads. This intervention significantly improves the performance of LLaMA models on the TruthfulQA benchmark. On an instruction-finetuned LLaMA called Alpaca, ITI improves its truthfulness from 32.5% to 65.1%. We identify a tradeoff between truthfulness and helpfulness and demonstrate how to balance it by tuning the intervention strength. ITI is minimally invasive and computationally inexpensive. Moreover, the technique is data efficient: while approaches like RLHF require extensive annotations, ITI locates truthful directions using only few hundred examples. Our findings suggest that LLMs may have an internal representation of the likelihood of something being true, even as they produce falsehoods on the surface.

Inference-time scaling has emerged as a powerful alternative to parameter scaling for improving language model performance on complex reasoning tasks. While existing methods have shown strong performance gains under fixed compute budgets, there has been little focus on optimally utilizing that budget during inference. In this work, we introduce A*-decoding, a search-based inference-time strategy that builds on the A* search algorithm to optimally utilize a fixed compute budget by prioritizing high-quality reasoning paths during generation. We frame language model decoding as a structured search in a state space of partial solutions, applying the A* transition model to identify promising continuations guided by an external process supervision signal. In our experiments, A*-decoding reaches the performance levels of strong inference scaling baselines like best-of-N and particle filtering while using up to 3x fewer tokens and 30% fewer PRM passes under equivalent compute budgets. On the MATH500 and AIME 2024 benchmarks, A*-decoding enables Llama-3.2-1B-Instruct to match the performance of the 70x larger Llama-3.1-70B-Instruct, and allows Qwen3-1.7B to reach o1-like reasoning accuracy. These results highlight the power of structured search in decoding, offering an alternative to brute-force sampling or scale-driven gains. Our work demonstrates how thoughtful inference-time strategies can enhance reasoning in SLMs, pointing toward future advances in more efficient and scalable language model deployment.

Diffusion Probabilistic Models (DPM) have shown remarkable efficacy in the synthesis of high-quality images. However, their inference process characteristically requires numerous, potentially hundreds, of iterative steps, which could exaggerate the problem of exposure bias due to the training and inference discrepancy. Previous work has attempted to mitigate this issue by perturbing inputs during training, which consequently mandates the retraining of the DPM. In this work, we conduct a systematic study of exposure bias in DPM and, intriguingly, we find that the exposure bias could be alleviated with a novel sampling method that we propose, without retraining the model. We empirically and theoretically show that, during inference, for each backward time step t and corresponding state x_t, there might exist another time step t_s which exhibits superior coupling with x_t. Based on this finding, we introduce a sampling method named Time-Shift Sampler. Our framework can be seamlessly integrated to existing sampling algorithms, such as DDPM, DDIM and other high-order solvers, inducing merely minimal additional computations. Experimental results show our method brings significant and consistent improvements in FID scores on different datasets and sampling methods. For example, integrating Time-Shift Sampler to F-PNDM yields a FID=3.88, achieving 44.49\% improvements as compared to F-PNDM, on CIFAR-10 with 10 sampling steps, which is more performant than the vanilla DDIM with 100 sampling steps. Our code is available at https://github.com/Mingxiao-Li/TS-DPM.

Large Language Models (LLMs) have achieved impressive performance on reasoning-intensive tasks, yet optimizing their reasoning efficiency remains an open challenge. While Test-Time Scaling (TTS) improves reasoning quality, it often leads to overthinking, wasting tokens on redundant computations. This work investigates how to efficiently and adaptively guide LLM test-time scaling without additional training. Inspired by the concept of momentum in physics, we propose Momentum Uncertainty-guided Reasoning (MUR), which dynamically allocates thinking budgets to critical reasoning steps by tracking and aggregating stepwise uncertainty over time. To support flexible inference-time control, we introduce gamma-control, a simple mechanism that tunes the reasoning budget via a single hyperparameter. We provide in-depth theoretical proof to support the superiority of MUR in terms of stability and biases. MUR is comprehensively evaluated against various TTS methods across four challenging benchmarks (MATH-500, AIME24, AIME25, and GPQA-diamond) using different sizes of recent Qwen3 models (1.7B, 4B, and 8B). Results demonstrate that MUR reduces computation by over 50% on average while improving accuracy by 0.62-3.37%.

Large language models (LLMs) have achieved significant performance gains via scaling up model sizes and/or data. However, recent evidence suggests diminishing returns from such approaches, motivating scaling the computation spent at inference time. Existing inference-time scaling methods, usually with reward models, cast the task as a search problem, which tends to be vulnerable to reward hacking as a consequence of approximation errors in reward models. In this paper, we instead cast inference-time scaling as a probabilistic inference task and leverage sampling-based techniques to explore the typical set of the state distribution of a state-space model with an approximate likelihood, rather than optimize for its mode directly. We propose a novel inference-time scaling approach by adapting particle-based Monte Carlo methods to this task. Our empirical evaluation demonstrates that our methods have a 4-16x better scaling rate over our deterministic search counterparts on various challenging mathematical reasoning tasks. Using our approach, we show that Qwen2.5-Math-1.5B-Instruct can surpass GPT-4o accuracy in only 4 rollouts, while Qwen2.5-Math-7B-Instruct scales to o1 level accuracy in only 32 rollouts. Our work not only presents an effective method to inference-time scaling, but also connects the rich literature in probabilistic inference with inference-time scaling of LLMs to develop more robust algorithms in future work. Code and further information is available at https://probabilistic-inference-scaling.github.io.

There is intense interest in investigating how inference time compute (ITC) (e.g. repeated sampling, refinements, etc) can improve large language model (LLM) capabilities. At the same time, recent breakthroughs in reasoning models, such as Deepseek-R1, unlock the opportunity for reinforcement learning to improve LLM reasoning skills. An in-depth understanding of how ITC interacts with reasoning across different models could provide important guidance on how to further advance the LLM frontier. This work conducts a comprehensive analysis of inference-time scaling methods for both reasoning and non-reasoning models on challenging reasoning tasks. Specifically, we focus our research on verifier-free inference time-scaling methods due to its generalizability without needing a reward model. We construct the Pareto frontier of quality and efficiency. We find that non-reasoning models, even with an extremely high inference budget, still fall substantially behind reasoning models. For reasoning models, majority voting proves to be a robust inference strategy, generally competitive or outperforming other more sophisticated ITC methods like best-of-N and sequential revisions, while the additional inference compute offers minimal improvements. We further perform in-depth analyses of the association of key response features (length and linguistic markers) with response quality, with which we can improve the existing ITC methods. We find that correct responses from reasoning models are typically shorter and have fewer hedging and thinking markers (but more discourse markers) than the incorrect responses.

Autonomous coding agents solve repository issues by reading code, running commands, editing files, and submitting patches. Extra inference-time compute yields gains only when it produces a useful repair and supplies reliable evidence for choosing one. Three behaviors decide both, and we argue they are teachable rather than byproducts of scale, so a policy can carry them instead of a scaffold. Location diversity remains narrow, since attempts return to the same site and extra samples add no coverage. Edit diversity is left unexploited, since methodologies that differ resolve complementary issues no single run reaches. Verification misleads, since a test the agent writes for its own patch accepts many incorrect ones. Directing search by execution feedback and scoring each patch against its own reverted tree resolves 52.8% of SWE-bench Verified using 48.1% of the agent-steps an eight-sample baseline spends. Training moves these behaviors into the policy. On the 270 issues held out from SFT and RL training, weighted supervised fine-tuning raises pass@1 from 31.9% to 35.2% and pass@8 from 46.7% to 51.1%. A reinforcement objective then trains the verifier against gold-labeled repairs and incorrect variants, crediting the assertions that detect them. It raises pass@1 to 43.0% and pass@8 to 60.7%, lifts verifier precision from 26.8% to 41.7%, and more than halves false acceptance. Resolution improves on two of three out-of-distribution suites and verifier precision on all three, and the gains hold at 7B, 14B, and 30B against published coder baselines.

We propose a framework that amortizes the cost of inference-time reasoning by converting transient critiques into retrievable guidelines, through a file-based memory system and agent-controlled tool calls. We evaluate this method on the Rubric Feedback Bench, a novel dataset for rubric-based learning. Experiments demonstrate that our augmented LLMs rapidly match the performance of test-time refinement pipelines while drastically reducing inference cost.

Inference-time scaling techniques have shown promise in enhancing the reasoning capabilities of large language models (LLMs). While recent research has primarily focused on training-time optimization, our work highlights inference-time reward model (RM)-based reasoning as a critical yet overlooked avenue. In this paper, we conduct a systematic analysis of RM behavior across downstream reasoning tasks, revealing three key limitations: (1) RM can impair performance on simple questions, (2) its discriminative ability declines with increased sampling, and (3) high search diversity undermines RM performance. To address these issues, we propose CRISP (Clustered Reward Integration with Stepwise Prefixing), a novel inference-time algorithm that clusters generated reasoning paths by final answers, aggregates reward signals at the cluster level, and adaptively updates prefix prompts to guide generation. Experimental results demonstrate that CRISP significantly enhances LLM reasoning performance, achieving up to 5% accuracy improvement over other RM-based inference methods and an average of 10% gain over advanced reasoning models.

The safe and effective deployment of Large Language Models (LLMs) involves a critical step called alignment, which ensures that the model's responses are in accordance with human preferences. Prevalent alignment techniques, such as DPO, PPO and their variants, align LLMs by changing the pre-trained model weights during a phase called post-training. While predominant, these post-training methods add substantial complexity before LLMs can be deployed. Inference-time alignment methods avoid the complex post-training step and instead bias the generation towards responses that are aligned with human preferences. The best-known inference-time alignment method, called Best-of-N, is as effective as the state-of-the-art post-training procedures. Unfortunately, Best-of-N requires vastly more resources at inference time than standard decoding strategies, which makes it computationally not viable. In this work, we introduce Speculative Rejection, a computationally-viable inference-time alignment algorithm. It generates high-scoring responses according to a given reward model, like Best-of-N does, while being between 16 to 32 times more computationally efficient.

Inference-time optimization scales computation to derive deliberate reasoning steps for effective performance. While previous search-based strategies address the short-sightedness of auto-regressive generation, the vast search space leads to excessive exploration and insufficient exploitation. To strike an efficient balance to derive the optimal step, we frame the decoding strategy as foresight sampling, leveraging simulated future steps to obtain globally optimal step estimation. Built on it, we propose a novel decoding strategy, named phi-Decoding. To provide a precise and expressive estimation of step value, phi-Decoding approximates two distributions via foresight and clustering. Sampling from the joint distribution, the optimal steps can be selected for exploitation. To support adaptive computation allocation, we propose in-width and in-depth pruning strategies, featuring a light-weight solution to achieve inference efficiency. Extensive experiments across seven benchmarks show phi-Decoding outperforms strong baselines in both performance and efficiency. Additional analysis demonstrates its generalization across various LLMs and scalability across a wide range of computing budgets. The code will be released at https://github.com/xufangzhi/phi-Decoding, and the open-source PyPI package is coming soon.

In this paper, we introduce TimeGPT, the first foundation model for time series, capable of generating accurate predictions for diverse datasets not seen during training. We evaluate our pre-trained model against established statistical, machine learning, and deep learning methods, demonstrating that TimeGPT zero-shot inference excels in performance, efficiency, and simplicity. Our study provides compelling evidence that insights from other domains of artificial intelligence can be effectively applied to time series analysis. We conclude that large-scale time series models offer an exciting opportunity to democratize access to precise predictions and reduce uncertainty by leveraging the capabilities of contemporary advancements in deep learning.

While foundation models have been exploited for various expert tasks through fine-tuning, any foundation model will become outdated due to its old knowledge or limited capability. Thus the underlying foundation model should be eventually replaced by new ones, which leads to repeated cost of fine-tuning these new models. Existing work addresses this problem by inference-time tuning, i.e., modifying the output probabilities from the new foundation model with the outputs from the old foundation model and its fine-tuned model, which involves an additional overhead in inference by the latter two models. In this paper, we propose a new fine-tuning principle, Portable Reward Tuning (PRT), that reduces the inference overhead by its nature, based on the reformulation of fine-tuning as the reward maximization. Specifically, instead of fine-tuning parameters of the foundation models, PRT trains the reward model explicitly through the same loss function as in fine-tuning. During inference, the reward model can be used with any foundation model (with the same set of vocabularies or labels) through the formulation of reward maximization. Experimental results, covering both vision and language models, demonstrate that the PRT-trained model can achieve comparable accuracy to the existing work of inference-time tuning, with less inference cost.

Photographs captured in unstructured tourist environments frequently exhibit variable appearances and transient occlusions, challenging accurate scene reconstruction and inducing artifacts in novel view synthesis. Although prior approaches have integrated the Neural Radiance Field (NeRF) with additional learnable modules to handle the dynamic appearances and eliminate transient objects, their extensive training demands and slow rendering speeds limit practical deployments. Recently, 3D Gaussian Splatting (3DGS) has emerged as a promising alternative to NeRF, offering superior training and inference efficiency along with better rendering quality. This paper presents Wild-GS, an innovative adaptation of 3DGS optimized for unconstrained photo collections while preserving its efficiency benefits. Wild-GS determines the appearance of each 3D Gaussian by their inherent material attributes, global illumination and camera properties per image, and point-level local variance of reflectance. Unlike previous methods that model reference features in image space, Wild-GS explicitly aligns the pixel appearance features to the corresponding local Gaussians by sampling the triplane extracted from the reference image. This novel design effectively transfers the high-frequency detailed appearance of the reference view to 3D space and significantly expedites the training process. Furthermore, 2D visibility maps and depth regularization are leveraged to mitigate the transient effects and constrain the geometry, respectively. Extensive experiments demonstrate that Wild-GS achieves state-of-the-art rendering performance and the highest efficiency in both training and inference among all the existing techniques.

Model editing keeps large language models (LLMs) up to date without retraining, but temporal facts expose a limitation of the prevailing locate-and-edit paradigm: an update is not always a replacement. When a fact changes, the new answer should become current while the old answer may remain correct in historical time contexts. Building on this insight, we use causal tracing to show that LLMs already support this distinction via a two-stage internal computation: early MLP layers retrieve a time-agnostic subject representation, and later layers modulate it with temporal context to yield the time-correct answer. Motivated by this finding, we introduce PRISM Edit, which optimizes a single polysemous representation across temporal contexts and leverages the model's inherent modulation pathway to route it to temporally correct predictions, without any architectural modification. We evaluate on TimeConflict, a new temporal editing benchmark we introduce, and on temporally augmented CounterFact. PRISM Edit improves over the best baseline by +23.3 Temporal Consistency (TC) and +33.7 Current Relative-time Score (CRS) on average while being more than 2x faster. Code and data are publicly available at https://github.com/AnonymousStudy972/PRISM-Edit.

Inference-time scaling has emerged as a powerful technique for enhancing the reasoning performance of Large Language Models (LLMs). However, existing approaches often rely on heuristic strategies for parallel sampling, lacking a principled foundation. To address this gap, we propose a probabilistic framework that formalizes the optimality of inference-time scaling under the assumption that parallel samples are independently and identically distributed (i.i.d.), and where the Best-of-N selection strategy follows a probability distribution that can be estimated. Within this framework, we derive a theoretical lower bound on the required number of samples to achieve a target performance level, providing the first principled guidance for compute-efficient scaling. Leveraging this insight, we develop OptScale, a practical algorithm that dynamically determines the optimal number of sampled responses. OptScale employs a language model-based predictor to estimate probabilistic prior parameters, enabling the decision of the minimal number of samples needed that satisfy predefined performance thresholds and confidence levels. Extensive experiments on representative reasoning benchmarks (including MATH-500, GSM8K, AIME, and AMC) demonstrate that OptScale significantly reduces sampling overhead while remaining better or on par with state-of-the-art reasoning performance. Our work offers both a theoretical foundation and a practical solution for principled inference-time scaling, addressing a critical gap in the efficient deployment of LLMs for complex reasoning.

Prefill-only decision models inspired by the Jev model score every candidate in a menu during a single forward pass and never decode, which makes one call one to two orders of magnitude cheaper than a same-scale generative language model. We show that this read-out structure comes with a testable property. When an intervention changes only the candidate menu and leaves the input text fixed, the post-intervention accuracy is already determined by the cached first-pass distribution. The estimator restricts the pass-1 probabilities to the menu, renormalizes, and reads off the argmax; it uses no labels and no second forward pass. Across seven model families, ten datasets and two task types, menu-only interventions are predicted to within 4.2 points, and for one family the prediction is exact. A probability-level variant of the same estimator errs by 21.0 points, so the property lives in the ranking rather than in the probabilities and is not recovered by calibration. Same-scale generative language models do not share the property. On those models the same estimator errs by 1.6 to 15.8 points and degrades as the model grows. The property turns inference-time compute into a decision that can be made before deployment. Uniform extra passes buy calibration but almost no accuracy; at matched cost a confidence cascade outperforms every scheme that re-asks the same model, and curating the menu beats enlarging the model, with a 0.8B model on a curated 5-candidate menu reaching 95.4% on CLINC150 against 80.0% for a 4B model on the full 150-label menu.Code and data are available at https://github.com/rlisml/jev-cascade.

Generative models have made significant impacts across various domains, largely due to their ability to scale during training by increasing data, computational resources, and model size, a phenomenon characterized by the scaling laws. Recent research has begun to explore inference-time scaling behavior in Large Language Models (LLMs), revealing how performance can further improve with additional computation during inference. Unlike LLMs, diffusion models inherently possess the flexibility to adjust inference-time computation via the number of denoising steps, although the performance gains typically flatten after a few dozen. In this work, we explore the inference-time scaling behavior of diffusion models beyond increasing denoising steps and investigate how the generation performance can further improve with increased computation. Specifically, we consider a search problem aimed at identifying better noises for the diffusion sampling process. We structure the design space along two axes: the verifiers used to provide feedback, and the algorithms used to find better noise candidates. Through extensive experiments on class-conditioned and text-conditioned image generation benchmarks, our findings reveal that increasing inference-time compute leads to substantial improvements in the quality of samples generated by diffusion models, and with the complicated nature of images, combinations of the components in the framework can be specifically chosen to conform with different application scenario.

Grasping the concept of time is a fundamental facet of human cognition, indispensable for truly comprehending the intricacies of the world. Previous studies typically focus on specific aspects of time, lacking a comprehensive temporal reasoning benchmark. To address this, we propose TimeBench, a comprehensive hierarchical temporal reasoning benchmark that covers a broad spectrum of temporal reasoning phenomena. TimeBench provides a thorough evaluation for investigating the temporal reasoning capabilities of large language models. We conduct extensive experiments on GPT-4, LLaMA2, and other popular LLMs under various settings. Our experimental results indicate a significant performance gap between the state-of-the-art LLMs and humans, highlighting that there is still a considerable distance to cover in temporal reasoning. Besides, LLMs exhibit capability discrepancies across different reasoning categories. Furthermore, we thoroughly analyze the impact of multiple aspects on temporal reasoning and emphasize the associated challenges. We aspire for TimeBench to serve as a comprehensive benchmark, fostering research in temporal reasoning. Resources are available at: https://github.com/zchuz/TimeBench

Recently, Zaremba et al. demonstrated that increasing inference-time computation improves robustness in large proprietary reasoning LLMs. In this paper, we first show that smaller-scale, open-source models (e.g., DeepSeek R1, Qwen3, Phi-reasoning) can also benefit from inference-time scaling using a simple budget forcing strategy. More importantly, we reveal and critically examine an implicit assumption in prior work: intermediate reasoning steps are hidden from adversaries. By relaxing this assumption, we identify an important security risk, intuitively motivated and empirically verified as an inverse scaling law: if intermediate reasoning steps become explicitly accessible, increased inference-time computation consistently reduces model robustness. Finally, we discuss practical scenarios where models with hidden reasoning chains are still vulnerable to attacks, such as models with tool-integrated reasoning and advanced reasoning extraction attacks. Our findings collectively demonstrate that the robustness benefits of inference-time scaling depend heavily on the adversarial setting and deployment context. We urge practitioners to carefully weigh these subtle trade-offs before applying inference-time scaling in security-sensitive, real-world applications.

Techniques that enhance inference through increased computation at test-time have recently gained attention. In this survey, we investigate the current state of LLM Inference-Time Self-Improvement from three different perspectives: Independent Self-improvement, focusing on enhancements via decoding or sampling methods; Context-Aware Self-Improvement, leveraging additional context or datastore; and Model-Aided Self-Improvement, achieving improvement through model collaboration. We provide a comprehensive review of recent relevant studies, contribute an in-depth taxonomy, and discuss challenges and limitations, offering insights for future research.

Long-horizon problem solving and scientific research require computation to accumulate across successive attempts. Partial solutions, experimental findings, and unsuccessful approaches can inform later work, yet most inference-time computation is organized around individual trajectories or candidates rather than a persistent body of reusable work. We call this paradigm compounding inference: organizing inference-time computation so that intermediate work persists and can be inspected, extended, combined, or challenged by subsequent computation. We instantiate compounding inference in GitSwarm, an asynchronous system where homogeneous agents independently decide how to advance a task while collaborating through structured persistent memory. Agents explore, experiment, verify, refine, and synthesize previous work in a shared, branch-able Git repository. Atomic commits preserve intermediate artifacts, while explicit semantic dependencies record how later contributions build on work across branches. We evaluate GitSwarm on long-horizon problem solving and sustained GPU-backed experimental research. On IMOProofBench-Advanced, GitSwarm solves all 30 problems in one run using GPT-5.5. On ProgramBench, it achieves a 79.4% mean score, versus 65.1% for the strongest reported baseline under the stated budget. On three neural architecture research tasks (Residual Matrix Transformer, Looped Transformer, NanoChat), GitSwarm improves upon the starting architectures through successive experimentation. Beyond final performance, we measure whether computation accumulates: on ProgramBench, 94.7% of contributions are subsequently built upon, while the selected solution's ancestry covers 82-93% of the contribution graph. These results show that inference-time computation can accumulate across otherwise independent episodes, forming an evolving body of work that subsequent inference can reuse.

Recent advances in inference-time compute have significantly improved performance on complex tasks by generating long chains of thought (CoTs) using Large Reasoning Models (LRMs). However, this improved accuracy comes at the cost of high inference latency due to the length of generated reasoning sequences and the autoregressive nature of decoding. Our key insight in tackling these overheads is that LRM inference, and the reasoning that it embeds, is highly tolerant of approximations: complex tasks are typically broken down into simpler steps, each of which brings utility based on the semantic insight it provides for downstream steps rather than the exact tokens it generates. Accordingly, we introduce SpecReason, a system that automatically accelerates LRM inference by using a lightweight model to (speculatively) carry out simpler intermediate reasoning steps and reserving the costly base model only to assess (and potentially correct) the speculated outputs. Importantly, SpecReason's focus on exploiting the semantic flexibility of thinking tokens in preserving final-answer accuracy is complementary to prior speculation techniques, most notably speculative decoding, which demands token-level equivalence at each step. Across a variety of reasoning benchmarks, SpecReason achieves 1.5-2.5times speedup over vanilla LRM inference while improving accuracy by 1.0-9.9\%. Compared to speculative decoding without SpecReason, their combination yields an additional 19.4-44.2\% latency reduction. We open-source SpecReason at https://github.com/ruipeterpan/specreason.

Tool-augmented language agents frequently fail in real-world deployment due to tool malfunctions--timeouts, API exceptions, or inconsistent outputs--triggering cascading reasoning errors and task abandonment. Existing agent training pipelines optimize only for success trajectories, failing to expose models to the tool failures that dominate real-world usage. We propose PALADIN, a generalizable framework for equipping language agents with robust failure recovery capabilities. PALADIN trains on 50,000+ recovery-annotated trajectories constructed via systematic failure injection and expert demonstrations on an enhanced ToolBench dataset. Training uses LoRA-based fine-tuning to retain base capabilities while injecting recovery competence. At inference, PALADIN detects execution-time errors and retrieves the most similar case from a curated bank of 55+ failure exemplars aligned with ToolScan's taxonomy, then executes the corresponding recovery action. This approach generalizes to novel failures beyond the training distribution, retaining 95.2\% recovery performance on unseen tool APIs. Evaluation across PaladinEval and ToolReflectEval demonstrates consistent improvements in Recovery Rate (RR), Task Success Rate (TSR), Catastrophic Success Rate (CSR), and Efficiency Score (ES). PALADIN improves RR from 32.76% to 89.68% (+57% relative) over ToolBench and outperforms the strongest baseline CRITIC (76.34%) by +13.3%. Against vanilla agents, PALADIN achieves 89.86\% RR (+66% relative improvement from 23.75%). These results establish PALADIN as an effective method for building fault-tolerant agents capable of robust recovery in real-world tool environments.

Retrieval-augmented generation (RAG) substantially extends the knowledge boundary of large language models. However, it still faces two major challenges when handling complex reasoning tasks: low context utilization and frequent hallucinations. To address these issues, we propose Self-Correcting RAG, a unified framework that reformulates retrieval and generation as constrained optimization and path planning. On the input side, we move beyond traditional greedy retrieval and, for the first time, formalize context selection as a multi-dimensional multiple-choice knapsack problem (MMKP), thereby maximizing information density and removing redundancy under a strict token budget. On the output side, we introduce a natural language inference (NLI)-guided Monte Carlo Tree Search (MCTS) mechanism, which leverages test-time compute to dynamically explore reasoning trajectories and validate the faithfulness of generated answers. Experiments on six multi-hop question answering and fact-checking datasets demonstrate that our method significantly improves reasoning accuracy on complex queries while effectively reducing hallucinations, outperforming strong existing baselines.Our code is available at https://github.com/xjiacs/Self-Correcting-RAG .

Current Multimodal Large Language Models (MLLMs) may struggle with understanding long or complex videos due to computational demands at test time, lack of robustness, and limited accuracy, primarily stemming from their feed-forward processing nature. These limitations could be more severe for models with fewer parameters. To address these limitations, we propose a novel framework inspired by cybernetic principles, redesigning video MLLMs as adaptive systems capable of self-monitoring, self-correction, and dynamic resource allocation during inference. Our approach, CyberV, introduces a cybernetic loop consisting of an MLLM Inference System, a Sensor, and a Controller. Specifically, the sensor monitors forward processes of the MLLM and collects intermediate interpretations, such as attention drift, then the controller determines when and how to trigger self-correction and generate feedback to guide the next round. This test-time adaptive scaling framework enhances frozen MLLMs without requiring retraining or additional components. Experiments demonstrate significant improvements: CyberV boosts Qwen2.5-VL-7B by 8.3% and InternVL3-8B by 5.5% on VideoMMMU, surpassing the competitive proprietary model GPT-4o. When applied to Qwen2.5-VL-72B, it yields a 10.0% improvement, achieving performance even comparable to human experts. Furthermore, our method demonstrates consistent gains on general-purpose benchmarks, such as VideoMME and WorldSense, highlighting its effectiveness and generalization capabilities in making MLLMs more robust and accurate for dynamic video understanding. The code is released at https://github.com/marinero4972/CyberV.

Diffusion models have become the mainstream architecture for text-to-image generation, achieving remarkable progress in visual quality and prompt controllability. However, current inference pipelines generally lack interpretable semantic supervision and correction mechanisms throughout the denoising process. Most existing approaches rely solely on post-hoc scoring of the final image, prompt filtering, or heuristic resampling strategies-making them ineffective in providing actionable guidance for correcting the generative trajectory. As a result, models often suffer from object confusion, spatial errors, inaccurate counts, and missing semantic elements, severely compromising prompt-image alignment and image quality. To tackle these challenges, we propose MLLM Semantic-Corrected Ping-Pong-Ahead Diffusion (PPAD), a novel framework that, for the first time, introduces a Multimodal Large Language Model (MLLM) as a semantic observer during inference. PPAD performs real-time analysis on intermediate generations, identifies latent semantic inconsistencies, and translates feedback into controllable signals that actively guide the remaining denoising steps. The framework supports both inference-only and training-enhanced settings, and performs semantic correction at only extremely few diffusion steps, offering strong generality and scalability. Extensive experiments demonstrate PPAD's significant improvements.

Large language models can solve substantially harder reasoning problems with more inference-time compute. The term "test-time scaling," however, now covers diverse inference algorithms that extend deliberation along a single trajectory, sample completed candidates and aggregate them through voting or verification, or search over unfinished partial states. These algorithms differ in their statistical structure, compute accounting, and failure modes. Treating these procedures as interchangeable under a single scalar "budget," or reporting accuracy without the inference protocol that produced it, makes results difficult to compare across studies. We develop a systematic account of test-time scaling along three axes. First, we formalize test-time scaling as budgeted inference over the implicit prefix tree of an autoregressive model and distinguish three structural regimes: single-trajectory sequential scaling, leaf-level scaling with terminal reduction, and prefix-level scaling. Second, we treat the evaluated object as the entire inference system and develop evaluation principles that separate end-to-end system performance from candidate-bank diagnostics. We introduce an evaluation profile whose coordinates and simple functionals recover or bound common repeated-sampling metrics, and prescribe protocol-matched reporting of compute and uncertainty. Third, we specify reproducibility requirements for inference protocols, distinguishing exact replay from distributional reproducibility and identifying the artifacts needed to support each. We also organize the open-weight reasoning ecosystem by model-side and interface mechanisms, apply these principles to broad-knowledge, symbolic-reasoning, and competition-mathematics benchmarks, and assemble over 2 billion full reasoning traces for release with progressively richer verifier and token-level signals.

Language models generate responses by producing a series of tokens in immediate succession: the (K+1)^{th} token is an outcome of manipulating K hidden vectors per layer, one vector per preceding token. What if instead we were to let the model manipulate say, K+10 hidden vectors, before it outputs the (K+1)^{th} token? We operationalize this idea by performing training and inference on language models with a (learnable) pause token, a sequence of which is appended to the input prefix. We then delay extracting the model's outputs until the last pause token is seen, thereby allowing the model to process extra computation before committing to an answer. We empirically evaluate pause-training on decoder-only models of 1B and 130M parameters with causal pretraining on C4, and on downstream tasks covering reasoning, question-answering, general understanding and fact recall. Our main finding is that inference-time delays show gains when the model is both pre-trained and finetuned with delays. For the 1B model, we witness gains on 8 of 9 tasks, most prominently, a gain of 18% EM score on the QA task of SQuAD, 8% on CommonSenseQA and 1% accuracy on the reasoning task of GSM8k. Our work raises a range of conceptual and practical future research questions on making delayed next-token prediction a widely applicable new paradigm.

Autoregressive models, despite their commendable performance in a myriad of generative tasks, face challenges stemming from their inherently sequential structure. Inference on these models, by design, harnesses a temporal dependency, where the current token's probability distribution is conditioned on preceding tokens. This inherent characteristic severely impedes computational efficiency during inference as a typical inference request can require more than thousands of tokens, where generating each token requires a load of entire model weights, making the inference more memory-bound. The large overhead becomes profound in real deployment where requests arrive randomly, necessitating various generation lengths. Existing solutions, such as dynamic batching and concurrent instances, introduce significant response delays and bandwidth contention, falling short of achieving optimal latency and throughput. To address these shortcomings, we propose Flover -- a temporal fusion framework for efficiently inferring multiple requests in parallel. We deconstruct the general generation pipeline into pre-processing and token generation, and equip the framework with a dedicated work scheduler for fusing the generation process temporally across all requests. By orchestrating the token-level parallelism, Flover exhibits optimal hardware efficiency and significantly spares the system resources. By further employing a fast buffer reordering algorithm that allows memory eviction of finished tasks, it brings over 11x inference speedup on GPT and 16x on LLAMA compared to the cutting-edge solutions provided by NVIDIA FasterTransformer. Crucially, by leveraging the advanced tensor parallel technique, Flover proves efficacious across diverse computational landscapes, from single-GPU setups to distributed scenarios, thereby offering robust performance optimization that adapts to variable use cases.

Inference-time controllable generation is essential for real-world applications of unconditional diffusion models. However, most existing techniques focus on individual samples, struggling in applications that require the sample population to follow specific attribute distributions (e.g., demographic balance or semantic proportions). We formalize this setting as the inference-time attribute distributional alignment problem for pretrained unconditional diffusion models. To address this, we cast inference-time attribute distributional alignment as an optimal control problem over the reverse diffusion process, viewing the process as the rollout of a dynamical system and augmenting it with additive, time-dependent perturbations as control. We solve for the perturbations using an optimal-control-based algorithm to optimize a differentiable distribution-matching objective while penalizing control effort to preserve data fidelity. Experiment results in image generation demonstrate that our proposed plug-and-play approach can better align attribute distributions to diverse and flexible test-time targets compared to baselines, without retraining or finetuning the pretrained diffusion model.

Chain-of-thought (CoT) prompting enhances reasoning in large language models (LLMs) but often leads to verbose and redundant outputs, thus increasing inference cost. We hypothesize that many reasoning steps are unnecessary for producing correct answers. To investigate this, we start with a systematic study to examine what is the minimum reasoning required for a model to reach a stable decision. We find that on math reasoning tasks like math, models typically converge to their final answers after 60\% of the reasoning steps, suggesting substantial redundancy in the remaining content. Based on these insights, we propose three inference-time strategies to improve efficiency: (1) early stopping via answer consistency, (2) boosting the probability of generating end-of-reasoning signals, and (3) a supervised method that learns when to stop based on internal activations. Experiments across five benchmarks and five open-weights LLMs show that our methods significantly reduce token usage with little or no accuracy drop. In particular, on NaturalQuestions, Answer Consistency reduces tokens by over 40\% while further improving accuracy. Our work underscores the importance of cost-effective reasoning methods that operate at inference time, offering practical benefits for real-world applications.

Recent studies have indicated that effectively utilizing inference-time compute is crucial for attaining better performance from large language models (LLMs). In this work, we propose a novel inference-aware fine-tuning paradigm, in which the model is fine-tuned in a manner that directly optimizes the performance of the inference-time strategy. We study this paradigm using the simple yet effective Best-of-N (BoN) inference strategy, in which a verifier selects the best out of a set of LLM-generated responses. We devise the first imitation learning and reinforcement learning~(RL) methods for BoN-aware fine-tuning, overcoming the challenging, non-differentiable argmax operator within BoN. We empirically demonstrate that our BoN-aware models implicitly learn a meta-strategy that interleaves best responses with more diverse responses that might be better suited to a test-time input -- a process reminiscent of the exploration-exploitation trade-off in RL. Our experiments demonstrate the effectiveness of BoN-aware fine-tuning in terms of improved performance and inference-time compute. In particular, we show that our methods improve the Bo32 performance of Gemma 2B on Hendrycks MATH from 26.8% to 30.8%, and pass@32 from 60.0% to 67.0%, as well as the pass@16 on HumanEval from 61.6% to 67.1%.

Test-time scaling increases inference-time computation by allowing models to generate long reasoning chains, and has shown strong performance across many domains. However, in this work, we show that this approach is not yet effective for knowledge-intensive tasks, where high factual accuracy and low hallucination rates are essential. We conduct a comprehensive evaluation of test-time scaling using 12 reasoning models on two knowledge-intensive benchmarks. Our results reveal that increasing test-time computation does not consistently improve accuracy and, in many cases, it even leads to more hallucinations. We then analyze how extended reasoning affects hallucination behavior. We find that reduced hallucinations often result from the model choosing to abstain after thinking more, rather than from improved factual recall. Conversely, for some models, longer reasoning encourages attempts on previously unanswered questions, many of which result in hallucinations. Case studies show that extended reasoning can induce confirmation bias, leading to overconfident hallucinations. Despite these limitations, we observe that compared to non-thinking, enabling thinking remains beneficial. Code and data are available at https://github.com/XuZhao0/tts-knowledge

Fixed-layout indoor furniture styling requires selecting assets that form a coherent room without changing the prescribed furniture categories, positions, orientations, or scales. Existing approaches typically retrieve each asset independently or rely on static local relations, making them prone to shape, material, and color conflicts after scene composition. We introduce StyleForge, a scene-level structured selection framework built on a dynamic hypergraph style field. A frozen multimodal large language model extracts structured style priors from an open-ended style request and the fixed layout, while StyleForge maintains a learnable candidate distribution for each furniture slot. Conditioned on the target style, the dynamic hypergraph style field adaptively activates and weights layout-induced hyperedges to capture higher-order dependencies among furniture. Counterfactual style preference learning then treats each candidate as a local substitution in the current style field and evaluates its contextual compatibility using Mahalanobis energies. Training alternates between optimizing the style field and the candidate logits. At inference, the model remains frozen and test-time training updates only room-specific candidate logits, progressively correcting cross-slot style conflicts as the global scene context evolves. Experiments on 3D-FRONT demonstrate state-of-the-art furniture retrieval and scene-level style coherence, producing more coherent fixed-layout furniture arrangements than object- and scene-level retrieval baselines.

Inference-Time Scaling (ITS) improves language models by allocating more computation at generation time. Particle Filtering (PF) has emerged as a strong ITS method for complex mathematical reasoning tasks, but it is vulnerable when guided by process reward models, which often assign overconfident scores early in the reasoning process. This causes PF to suffer from premature exploitation: it myopically commits to locally promising trajectories, prunes potentially correct hypotheses, and converges to suboptimal solutions. This failure mode, known as particle impoverishment, is especially severe under constrained computational budgets. To address this, we analyze the problem and identify two root causes: a lack of diversity in the particle set due to overconfident resampling and consequent inability to assess the potential of a reasoning path. We introduce Entropic Particle Filtering (ePF), an algorithm that integrates two new techniques to solve these issues. The first technique, Entropic Annealing (EA), directly mitigates particle impoverishment by monitoring search diversity via entropy; when diversity drops, it intervenes by dynamically annealing the resampling distribution to preserve exploration. The second, an enhancement called Look-ahead Modulation (LaM), adds a predictive guide to evaluate a state's potential based on its successors. On several challenging math benchmarks, ePF significantly outperforms strong baselines and achieves up to a 50 % relative improvement in task reward. Together, these methods improve PF's resilience by balancing the exploration of diverse solution spaces with the exploitation of high-reward regions, ultimately leading to higher-quality solutions.

Large language models (LLMs) have demonstrated strong capabilities in translating natural language questions about relational databases into SQL queries. In particular, test-time scaling techniques such as Self-Consistency and Self-Correction can enhance SQL generation accuracy by increasing computational effort during inference. However, these methods have notable limitations: Self-Consistency may select suboptimal outputs despite majority votes, while Self-Correction typically addresses only syntactic errors. To leverage the strengths of both approaches, we propose CSC-SQL, a novel method that integrates Self-Consistency and Self-Correction. CSC-SQL selects the two most frequently occurring outputs from parallel sampling and feeds them into a merge revision model for correction. Additionally, we employ the Group Relative Policy Optimization (GRPO) algorithm to fine-tune both the SQL generation and revision models via reinforcement learning, significantly enhancing output quality. Experimental results confirm the effectiveness and generalizability of CSC-SQL. On the BIRD development set, our 3B model achieves 65.28% execution accuracy, while the 7B model achieves 69.19%. The code will be open sourced at https://github.com/CycloneBoy/csc_sql.

We propose the first learning-based approach for fast moving objects detection. Such objects are highly blurred and move over large distances within one video frame. Fast moving objects are associated with a deblurring and matting problem, also called deblatting. We show that the separation of deblatting into consecutive matting and deblurring allows achieving real-time performance, i.e. an order of magnitude speed-up, and thus enabling new classes of application. The proposed method detects fast moving objects as a truncated distance function to the trajectory by learning from synthetic data. For the sharp appearance estimation and accurate trajectory estimation, we propose a matting and fitting network that estimates the blurred appearance without background, followed by an energy minimization based deblurring. The state-of-the-art methods are outperformed in terms of recall, precision, trajectory estimation, and sharp appearance reconstruction. Compared to other methods, such as deblatting, the inference is of several orders of magnitude faster and allows applications such as real-time fast moving object detection and retrieval in large video collections.

Allocating more computation during inference time (test-time scaling) improves language model performance, especially for reasoning tasks. However, popular methods like Best-of-N sampling often show diminishing returns as N increases. To address this inefficiency, we introduce a general test-time calibration framework that adaptively modifies the model toward high-reward reasoning paths, with theoretical guarantees of improving the lower bound of expected reward under finite sampling, all without large language model (LLM) retraining. Within this framework, we propose CarBoN (Calibrated Best-of-N), a two-phase method that first explores the solution space and then learns a calibration of the logits via an input-specific temperature T and additive shift vector delta, guiding generation toward more reliable reasoning. Experiments on MATH-500 and AIME-2024 show that CarBoN improves efficiency, with up to 4times fewer rollouts to reach the same accuracy, while often achieving higher accuracy under fixed budgets. We also analyze the complementary roles of T and delta in balancing output diversity and correctness, and demonstrate that the framework also generalizes to step-level sampling strategies such as beam search. For more information, please refer to our project page at huggingface.co/spaces/TrustSafeAI/Test-Time-Calibration.

Causal inference is often focused on average effects, which can hide important aspects of the effect distributions. Here we consider the entire posterior effects distribution by estimating full counterfactual outcome distributions. We propose a methodology for inference on counterfactual distributions which builds upon the martingale posterior framework of Fong et al. (2023). This provides a highly flexible approach to estimating densities, distribution functions, and derived quantities such as quantiles, which coherently quantifies the epistemic uncertainty on any target estimand of interest. As the predictive recursions are based on an underlying nonparametric model (a Dirichlet process mixture model), our method naturally inherits robustness with respect to restrictive parametric assumptions. In addition, implementation of our method is typically very fast. This approach can be applied to marginal or conditional counterfactual distributions and is easily extended to an instrumental variables setup. Using the concept of almost conditionally identically distributed random variables, we prove convergence of the martingale posterior inference on the counterfactual outcome distributions for the causal models considered in the paper. We illustrate our approach on both simulated and real data. Using the latter, we investigate the effect of zinc lozenges on common cold duration, the impact of vitamin A supplementation on children's survival rates with one-sided non-compliance (analysed in Imbens and Rubin, 1997a) and the effect of job training (LaLonde, 1986).

Human cognition is deeply intertwined with a sense of time, known as Chronoception. This sense allows us to judge how long facts remain valid and when knowledge becomes outdated. Despite progress in vision, language, and motor control, AI still struggles to reason about temporal validity. We introduce Chronocept, the first benchmark to model temporal validity as a continuous probability distribution over time. Using skew-normal curves fitted along semantically decomposed temporal axes, Chronocept captures nuanced patterns of emergence, decay, and peak relevance. It includes two datasets: Benchmark I (atomic facts) and Benchmark II (multi-sentence passages). Annotations show strong inter-annotator agreement (84% and 89%). Our baselines predict curve parameters - location, scale, and skewness - enabling interpretable, generalizable learning and outperforming classification-based approaches. Chronocept fills a foundational gap in AI's temporal reasoning, supporting applications in knowledge grounding, fact-checking, retrieval-augmented generation (RAG), and proactive agents. Code and data are publicly available.

As large language models (LLMs) increasingly tackle complex reasoning tasks, test-time scaling has become critical for enhancing capabilities. However, in agentic scenarios with frequent tool calls, the traditional generation-length-based definition breaks down: tool latency decouples inference time from generation length. We propose Timely Machine, redefining test-time as wall-clock time, where models dynamically adjust strategies based on time budgets. We introduce Timely-Eval, a benchmark spanning high-frequency tool calls, low-frequency tool calls, and time-constrained reasoning. By varying tool latency, we find smaller models excel with fast feedback through more interactions, while larger models dominate high-latency settings via superior interaction quality. Moreover, existing models fail to adapt reasoning to time budgets. We propose Timely-RL to address this gap. After cold-start supervised fine-tuning, we use reinforcement learning to enhance temporal planning. Timely-RL improves time budget awareness and consistently boosts performance across Timely-Eval. We hope our work offers a new perspective on test-time scaling for the agentic era.

Vision-Language-Action models (VLAs) are becoming increasingly capable across diverse robotic tasks. However, their real-world deployment remains slow and inefficient: demonstration videos are often sped up by 5-10x to appear smooth, with noticeable action stalls and delayed reactions to environmental changes. Asynchronous inference offers a promising solution to achieve continuous and low-latency control by enabling robots to execute actions and perform inference simultaneously. However, because the robot and environment continue to evolve during inference, a temporal misalignment arises between the prediction and execution intervals. This leads to significant action instability, while existing methods either degrade accuracy or introduce runtime overhead to mitigate it. We propose VLASH, a general asynchronous inference framework for VLAs that delivers smooth, accurate, and fast reaction control without additional overhead or architectural changes. VLASH estimates the future execution-time state by rolling the robot state forward with the previously generated action chunk, thereby bridging the gap between prediction and execution. Experiments show that VLASH achieves up to 2.03x speedup and reduces reaction latency by up to 17.4x compared to synchronous inference while fully preserving the original accuracy. Moreover, it empowers VLAs to handle fast-reaction, high-precision tasks such as playing ping-pong and playing whack-a-mole, where traditional synchronous inference fails. Code is available at https://github.com/mit-han-lab/vlash

Causal inference is the practice of estimating the effect of a treatment or intervention from data. It traditionally requires a bespoke pipeline for every new problem: first proposing a causal mechanism, selecting a compatible estimator, and finally training it. Meanwhile, across diverse settings and modalities, much of machine learning has shifted to the paradigm of foundation models: networks pretrained once at scale and applied to new tasks without fine-tuning. Causal foundation models (CFMs) bring this paradigm to causal inference. CFMs are pretrained neural networks that estimate causal quantities, such as the average treatment effect, on entirely new datasets using in-context learning without requiring model updates. This work provides a practical introduction to this emerging area. We summarize the necessary background in causal inference and machine learning before discussing CFMs. Throughout, we include example code and Jupyter notebooks.

Building upon our previous investigations of O1 replication (Part 1: Journey Learning [Qin et al., 2024] and Part 2: Distillation [Huang et al., 2024]), this work explores the potential of inference-time scaling in large language models (LLMs) for medical reasoning tasks, ranging from diagnostic decision-making to treatment planning. Through extensive experiments on medical benchmarks of varying complexity (MedQA, Medbullets, and JAMA Clinical Challenges), our investigation reveals several key insights: (1) Increasing inference time does lead to improved performance. With a modest training set of 500 samples, our model yields substantial performance improvements of 6%-11%. (2) Task complexity directly correlates with the required length of reasoning chains, confirming the necessity of extended thought processes for challenging problems. (3) The differential diagnoses generated by our model adhere to the principles of the hypothetico-deductive method, producing a list of potential conditions that may explain a patient's symptoms and systematically narrowing these possibilities by evaluating the evidence. These findings demonstrate the promising synergy between inference-time scaling and journey learning in advancing LLMs' real-world clinical reasoning capabilities.

We conduct experiments on the impact of increasing inference-time compute in reasoning models (specifically OpenAI o1-preview and o1-mini) on their robustness to adversarial attacks. We find that across a variety of attacks, increased inference-time compute leads to improved robustness. In many cases (with important exceptions), the fraction of model samples where the attack succeeds tends to zero as the amount of test-time compute grows. We perform no adversarial training for the tasks we study, and we increase inference-time compute by simply allowing the models to spend more compute on reasoning, independently of the form of attack. Our results suggest that inference-time compute has the potential to improve adversarial robustness for Large Language Models. We also explore new attacks directed at reasoning models, as well as settings where inference-time compute does not improve reliability, and speculate on the reasons for these as well as ways to address them.

Temporal question answering is an established method for evaluating temporal reasoning in large language models. Expected answers are often numeric (e.g., dates or durations), yet model responses are evaluated like regular text with exact match (EM), unable to distinguish small from large errors. In this investigative work, we frame temporal question answering as a numerical estimation task to assess the shortcomings of EM. We introduce TempAnswerQA, a benchmark distilled from Test of Time and TempTabQA, where all questions require a numerical, temporal answer, allowing us to evaluate models beyond EM. We use the forecasting metrics symmetric mean absolute percentage error (sMAPE) and mean absolute scaled error (MASE). With sMAPE, we find that error size and EM are decoupled. Models with low EM still have low sMAPE (both ~20%), and some models have high sMAPE despite high EM. Scaling errors by the deviation of the ground truth data with MASE reshuffles model rankings compared to EM, revealing gaps in models' understanding of temporal domain knowledge, especially when trained with synthetic data. Lastly, the models' most frequent error is to deviate by only pm1 from the ground truth. sMAPE and MASE, unlike EM, adequately weight these errors. Our findings underscore the need for specialised metrics for temporal QA tasks. Code and data are available on https://github.com/aauss/temporal-answer-qa.

Generating temporal data under conditions is crucial for forecasting, imputation, and generative tasks. Such data often has metadata and partially observed signals that jointly influence the generated values. However, existing methods face three key limitations: (1) they condition on either the metadata or observed values, but rarely both together; (2) they adopt either training-time approaches that fail to generalize to unseen scenarios, or inference-time approaches that ignore metadata; and (3) they suffer from trade-offs between generation speed and temporal coherence across time windows--choosing either slow but coherent autoregressive methods or fast but incoherent parallel ones. We propose WaveStitch, a novel diffusion-based method to overcome these hurdles through: (1) dual-sourced conditioning on both metadata and partially observed signals; (2) a hybrid training-inference architecture, incorporating metadata during training and observations at inference via gradient-based guidance; and (3) a novel pipeline-style paradigm that generates time windows in parallel while preserving coherence through an inference-time conditional loss and a stitching mechanism. Across diverse datasets, WaveStitch demonstrates adaptability to arbitrary patterns of observed signals, achieving 1.81x lower mean-squared-error compared to the state-of-the-art, and generates data up to 166.48x faster than autoregressive methods while maintaining coherence. Our code is available at: https://github.com/adis98/WaveStitch

While AI agents have shown remarkable performance at various tasks, they still struggle with complex multi-modal applications, structured generation and strategic planning. Improvements via standard fine-tuning is often impractical, as solving agentic tasks usually relies on black box API access without control over model parameters. Inference-time methods such as Best-of-N (BON) sampling offer a simple yet effective alternative to improve performance. However, BON lacks iterative feedback integration mechanism. Hence, we propose Iterative Agent Decoding (IAD) which combines iterative refinement with dynamic candidate evaluation and selection guided by a verifier. IAD differs in how feedback is designed and integrated, specifically optimized to extract maximal signal from reward scores. We conduct a detailed comparison of baselines across key metrics on Sketch2Code, Text2SQL, and Webshop where IAD consistently outperforms baselines, achieving 3--6% absolute gains on Sketch2Code and Text2SQL (with and without LLM judges) and 8--10% gains on Webshop across multiple metrics. To better understand the source of IAD's gains, we perform controlled experiments to disentangle the effect of adaptive feedback from stochastic sampling, and find that IAD's improvements are primarily driven by verifier-guided refinement, not merely sampling diversity. We also show that both IAD and BON exhibit inference-time scaling with increased compute when guided by an optimal verifier. Our analysis highlights the critical role of verifier quality in effective inference-time optimization and examines the impact of noisy and sparse rewards on scaling behavior. Together, these findings offer key insights into the trade-offs and principles of effective inference-time optimization.

Diffusion Probabilistic Models have demonstrated remarkable performance across a wide range of generative tasks. However, we have observed that these models often suffer from a Signal-to-Noise Ratio-timestep (SNR-t) bias. This bias refers to the misalignment between the SNR of the denoising sample and its corresponding timestep during the inference phase. Specifically, during training, the SNR of a sample is strictly coupled with its timestep. However, this correspondence is disrupted during inference, leading to error accumulation and impairing the generation quality. We provide comprehensive empirical evidence and theoretical analysis to substantiate this phenomenon and propose a simple yet effective differential correction method to mitigate the SNR-t bias. Recognizing that diffusion models typically reconstruct low-frequency components before focusing on high-frequency details during the reverse denoising process, we decompose samples into various frequency components and apply differential correction to each component individually. Extensive experiments show that our approach significantly improves the generation quality of various diffusion models (IDDPM, ADM, DDIM, A-DPM, EA-DPM, EDM, PFGM++, and FLUX) on datasets of various resolutions with negligible computational overhead. The code is at https://github.com/AMAP-ML/DCW.