Daily Papers

Vision-language-action (VLA) policies based on flow matching generate action chunks through repeated evaluations of an action expert. Increasing the number of integration steps raises inference cost, but does not necessarily improve closed-loop success. We propose Coda, which reallocates part of this integration budget to a single learned endpoint correction. A frozen policy first completes a few-step noise-to-action trajectory; a lightweight Transformer then predicts a demonstration-supervised residual using the candidate action, source noise, and shared observation-prefix cache. Only the corrector is trained. On 50 RoboTwin Easy tasks, five-step Coda improves success from 71.64% to 74.68% over the matched five-step baseline, while reducing forward latency by 30.2% relative to the default ten-step policy. A two-step configuration achieves 71.88% success with a 2.12times speedup. An independent 13-task control shows a 5.69-percentage-point gain at nearly equal latency, supporting correction as an effective alternative to additional integration. The same design also improves frozen official SmolVLA, raising two-step success from 60.8% to 69.4%. These results show that endpoint correction improves the quality-latency trade-off of frozen flow-matching policies.

Flow matching generates data by integrating a learned velocity field, where the number of integration steps (NFE) directly determines inference cost. We analyze which properties of the velocity field govern integration error by decomposing the velocity Jacobian into its symmetric part S (strain rate) and antisymmetric part Omega (vorticity). We prove that strain and vorticity play different roles: strain controls exponential error amplification through the logarithmic norm, while vorticity contributes only linearly to the local truncation error. We further show that the optimal transport velocity field is irrotational and has zero material derivative, implying second-order Euler accuracy; for exact displacement interpolation, the associated Lagrangian particle dynamics are integrated exactly by Euler. Motivated by this analysis, we study weighted Jacobian regularization with strain weight alpha and vorticity weight beta. Experiments on 2D synthetic data confirm the main theoretical predictions, showing up to 2.7x lower integration error at NFE=5. Preliminary CIFAR-10 experiments show consistent trends, with a lightweight fine-tuning procedure improving FID by 14 percent at NFE=10 while preserving high-NFE quality.

We introduce a novel generative model for video prediction based on latent flow matching, an efficient alternative to diffusion-based models. In contrast to prior work, we keep the high costs of modeling the past during training and inference at bay by conditioning only on a small random set of past frames at each integration step of the image generation process. Moreover, to enable the generation of high-resolution videos and to speed up the training, we work in the latent space of a pretrained VQGAN. Finally, we propose to approximate the initial condition of the flow ODE with the previous noisy frame. This allows to reduce the number of integration steps and hence, speed up the sampling at inference time. We call our model Random frame conditioned flow Integration for VidEo pRediction, or, in short, RIVER. We show that RIVER achieves superior or on par performance compared to prior work on common video prediction benchmarks, while requiring an order of magnitude fewer computational resources.

Minibatch optimal transport coupling straightens paths in unconditional flow matching. This leads to computationally less demanding inference as fewer integration steps and less complex numerical solvers can be employed when numerically solving an ordinary differential equation at test time. However, in the conditional setting, minibatch optimal transport falls short. This is because the default optimal transport mapping disregards conditions, resulting in a conditionally skewed prior distribution during training. In contrast, at test time, we have no access to the skewed prior, and instead sample from the full, unbiased prior distribution. This gap between training and testing leads to a subpar performance. To bridge this gap, we propose conditional optimal transport C^2OT that adds a conditional weighting term in the cost matrix when computing the optimal transport assignment. Experiments demonstrate that this simple fix works with both discrete and continuous conditions in 8gaussians-to-moons, CIFAR-10, ImageNet-32x32, and ImageNet-256x256. Our method performs better overall compared to the existing baselines across different function evaluation budgets. Code is available at https://hkchengrex.github.io/C2OT

Crystalline materials are a fundamental component in next-generation technologies, yet modeling their distribution presents unique computational challenges. Of the plausible arrangements of atoms in a periodic lattice only a vanishingly small percentage are thermodynamically stable, which is a key indicator of the materials that can be experimentally realized. Two fundamental tasks in this area are to (a) predict the stable crystal structure of a known composition of elements and (b) propose novel compositions along with their stable structures. We present FlowMM, a pair of generative models that achieve state-of-the-art performance on both tasks while being more efficient and more flexible than competing methods. We generalize Riemannian Flow Matching to suit the symmetries inherent to crystals: translation, rotation, permutation, and periodic boundary conditions. Our framework enables the freedom to choose the flow base distributions, drastically simplifying the problem of learning crystal structures compared with diffusion models. In addition to standard benchmarks, we validate FlowMM's generated structures with quantum chemistry calculations, demonstrating that it is about 3x more efficient, in terms of integration steps, at finding stable materials compared to previous open methods.

Molecular dynamics (MD) provides insights into atomic-scale processes by integrating over time the equations that describe the motion of atoms under the action of interatomic forces. Machine learning models have substantially accelerated MD by providing inexpensive predictions of the forces, but they remain constrained to minuscule time integration steps, which are required by the fast time scale of atomic motion. In this work, we propose FlashMD, a method to predict the evolution of positions and momenta over strides that are between one and two orders of magnitude longer than typical MD time steps. We incorporate considerations on the mathematical and physical properties of Hamiltonian dynamics in the architecture, generalize the approach to allow the simulation of any thermodynamic ensemble, and carefully assess the possible failure modes of such a long-stride MD approach. We validate FlashMD's accuracy in reproducing equilibrium and time-dependent properties, using both system-specific and general-purpose models, extending the ability of MD simulation to reach the long time scales needed to model microscopic processes of high scientific and technological relevance.

Recent work shows that flow matching can be effective for scalar Q-value function estimation in reinforcement learning (RL), but it remains unclear why or how this approach differs from standard critics. Contrary to conventional belief, we show that their success is not explained by distributional RL, as explicitly modeling return distributions can reduce performance. Instead, we argue that the use of integration for reading out values and dense velocity supervision at each step of this integration process for training improves TD learning via two mechanisms. First, it enables robust value prediction through test-time recovery, whereby iterative computation through integration dampens errors in early value estimates as more integration steps are performed. This recovery mechanism is absent in monolithic critics. Second, supervising the velocity field at multiple interpolant values induces more plastic feature learning within the network, allowing critics to represent non-stationary TD targets without discarding previously learned features or overfitting to individual TD targets encountered during training. We formalize these effects and validate them empirically, showing that flow-matching critics substantially outperform monolithic critics (2times in final performance and around 5times in sample efficiency) in settings where loss of plasticity poses a challenge e.g., in high-UTD online RL problems, while remaining stable during learning.

Monocular 3D pose estimation is fundamentally ill-posed due to depth ambiguity and occlusions, thereby motivating probabilistic methods that generate multiple plausible 3D pose hypotheses. In particular, diffusion-based models have recently demonstrated strong performance, but their iterative denoising process typically requires many timesteps for each prediction, making inference computationally expensive. In contrast, we leverage Flow Matching (FM) to learn a velocity field defined by an Ordinary Differential Equation (ODE), enabling efficient generation of 3D pose samples with only a few integration steps. We propose a novel generative pose estimation framework, FMPose3D, that formulates 3D pose estimation as a conditional distribution transport problem. It continuously transports samples from a standard Gaussian prior to the distribution of plausible 3D poses conditioned only on 2D inputs. Although ODE trajectories are deterministic, FMPose3D naturally generates various pose hypotheses by sampling different noise seeds. To obtain a single accurate prediction from those hypotheses, we further introduce a Reprojection-based Posterior Expectation Aggregation (RPEA) module, which approximates the Bayesian posterior expectation over 3D hypotheses. FMPose3D surpasses existing methods on the widely used human pose estimation benchmarks Human3.6M and MPI-INF-3DHP, and further achieves state-of-the-art performance on the 3D animal pose datasets Animal3D and CtrlAni3D, demonstrating strong performance across both 3D pose domains. The code is available at https://github.com/AdaptiveMotorControlLab/FMPose3D.

A hallmark of modern large-scale machine learning techniques is the use of training objectives that provide dense supervision to intermediate computations, such as teacher forcing the next token in language models or denoising step-by-step in diffusion models. This enables models to learn complex functions in a generalizable manner. Motivated by this observation, we investigate the benefits of iterative computation for temporal difference (TD) methods in reinforcement learning (RL). Typically they represent value functions in a monolithic fashion, without iterative compute. We introduce floq (flow-matching Q-functions), an approach that parameterizes the Q-function using a velocity field and trains it using techniques from flow-matching, typically used in generative modeling. This velocity field underneath the flow is trained using a TD-learning objective, which bootstraps from values produced by a target velocity field, computed by running multiple steps of numerical integration. Crucially, floq allows for more fine-grained control and scaling of the Q-function capacity than monolithic architectures, by appropriately setting the number of integration steps. Across a suite of challenging offline RL benchmarks and online fine-tuning tasks, floq improves performance by nearly 1.8x. floq scales capacity far better than standard TD-learning architectures, highlighting the potential of iterative computation for value learning.

Diffusion models have achieved remarkable quality in multi-modal MRI synthesis, but their computational cost (hundreds of sampling steps and separate models per modality) limits clinical deployment. We observe that this inefficiency stems from an unnecessary starting point: diffusion begins from pure noise, discarding the structural information already present in available MRI sequences. We propose WFM (Wavelet Flow Matching), which instead learns a direct flow from an informed prior, the mean of conditioning modalities in wavelet space, to the target distribution. Because the source and target share underlying anatomy and differ primarily in contrast, this formulation enables accurate synthesis in just 1-2 integration steps. A single 82M-parameter model with class conditioning synthesizes all four BraTS modalities (T1, T1c, T2, FLAIR), replacing four separate diffusion models totaling 326M parameters. On BraTS 2024, WFM achieves 26.8 dB PSNR and 0.94 SSIM, within 1-2 dB of diffusion baselines, while running 250-1000x faster (0.16-0.64s vs. 160s per volume). This speed-quality trade-off makes real-time MRI synthesis practical for clinical workflows. Code is available at https://github.com/yalcintur/WFM.

Vision-Language-Action (VLA) models commonly generate robot actions token by token through Large Language Model (LLM) decoders, causing inference latency to grow with action sequence length and limiting closed-loop control frequency. We present Goal-Conditioned Vision-Predictor-Action (VPA), which replaces autoregressive decoders with a lightweight latent control loop. A shared vision encoder and a frozen text encoder embed observations, goal images, and instructions; a neuro-symbolic selector chooses a discrete skill; a Joint-Embedding Predictive Architecture (JEPA) predictor forecasts the next latent state; and a flow-matching solver generates an entire action chunk in a few integration steps, so that sequential network evaluations per decision step do not depend on the action horizon. We analyze inference complexity, regularization against representation collapse, and conditions under which latent sub-goal thresholding limits error accumulation across task phases. As an initial proof of concept, we evaluated VPA on the LIBERO-10 suite. The trainable model has under 20M parameters (checkpoint under 75 MB, excluding a frozen 63.4M-parameter CLIP text encoder); a decision step of a single-camera reference configuration takes 10-14 ms on an Apple M4; and trained only on LIBERO-10 demonstrations in under three hours on a single GPU, a two-camera policy succeeded in 40.0% of 200 evaluation episodes. These preliminary results from a single training run suggest the approach is workable. Code and weights are available at https://github.com/ylee-sling/Vision-Predictor-Action and https://huggingface.co/ylee-sling/vpa-libero10, and archived at https://doi.org/10.5281/zenodo.22960920.

With recent Nobel Prizes recognising AI contributions to science, Large Language Models (LLMs) are transforming scientific research by enhancing productivity and reshaping the scientific method. LLMs are now involved in experimental design, data analysis, and workflows, particularly in chemistry and biology. However, challenges such as hallucinations and reliability persist. In this contribution, we review how Large Language Models (LLMs) are redefining the scientific method and explore their potential applications across different stages of the scientific cycle, from hypothesis testing to discovery. We conclude that, for LLMs to serve as relevant and effective creative engines and productivity enhancers, their deep integration into all steps of the scientific process should be pursued in collaboration and alignment with human scientific goals, with clear evaluation metrics. The transition to AI-driven science raises ethical questions about creativity, oversight, and responsibility. With careful guidance, LLMs could evolve into creative engines, driving transformative breakthroughs across scientific disciplines responsibly and effectively. However, the scientific community must also decide how much it leaves to LLMs to drive science, even when associations with 'reasoning', mostly currently undeserved, are made in exchange for the potential to explore hypothesis and solution regions that might otherwise remain unexplored by human exploration alone.

Recent reinforcement learning has enhanced the flow matching models on human preference alignment. While stochastic sampling enables the exploration of denoising directions, existing methods which optimize over multiple denoising steps suffer from sparse and ambiguous reward signals. We observe that the high entropy steps enable more efficient and effective exploration while the low entropy steps result in undistinguished roll-outs. To this end, we propose E-GRPO, an entropy aware Group Relative Policy Optimization to increase the entropy of SDE sampling steps. Since the integration of stochastic differential equations suffer from ambiguous reward signals due to stochasticity from multiple steps, we specifically merge consecutive low entropy steps to formulate one high entropy step for SDE sampling, while applying ODE sampling on other steps. Building upon this, we introduce multi-step group normalized advantage, which computes group-relative advantages within samples sharing the same consolidated SDE denoising step. Experimental results on different reward settings have demonstrated the effectiveness of our methods.

This paper presents a novel approach to fine-tuning the Qwen2-1.5B model for Arabic language processing using Quantized Low-Rank Adaptation (QLoRA) on a system with only 4GB VRAM. We detail the process of adapting this large language model to the Arabic domain, using diverse datasets including Bactrian, OpenAssistant, and Wikipedia Arabic corpora. Our methodology involves custom data preprocessing, model configuration, and training optimization techniques such as gradient accumulation and mixed-precision training. We address specific challenges in Arabic NLP, including morphological complexity, dialectal variations, and diacritical mark handling. Experimental results over 10,000 training steps show significant performance improvements, with the final loss converging to 0.1083. We provide comprehensive analysis of GPU memory usage, training dynamics, and model evaluation across various Arabic language tasks, including text classification, question answering, and dialect identification. The fine-tuned model demonstrates robustness to input perturbations and improved handling of Arabic-specific linguistic phenomena. This research contributes to multilingual AI by demonstrating a resource-efficient approach for creating specialized language models, potentially democratizing access to advanced NLP technologies for diverse linguistic communities. Our work paves the way for future research in low-resource language adaptation and efficient fine-tuning of large language models.

Modern Large Language Models (LLMs) have demonstrated remarkable capabilities in complex tasks by employing search-augmented reasoning to incorporate external knowledge into long chains of thought. However, we identify a critical yet underexplored bottleneck in this paradigm, termed Knowledge Integration Decay (KID). Specifically, we observe that as the length of reasoning generated before search grows, models increasingly fail to integrate retrieved evidence into subsequent reasoning steps, limiting performance even when relevant information is available. To address this, we propose Self-Anchored Knowledge Encoding (SAKE), a training-free inference-time strategy designed to stabilize knowledge utilization. By anchoring retrieved knowledge at both the beginning and end of the reasoning process, SAKE prevents it from being overshadowed by prior context, thereby preserving its semantic integrity. Extensive experiments on multi-hop QA and complex reasoning benchmarks demonstrate that SAKE significantly mitigates KID and improves performance, offering a lightweight yet effective solution for knowledge integration in agentic LLMs.

Distillation techniques have substantially improved the sampling speed of diffusion models, allowing of the generation within only one step or a few steps. However, these distillation methods require extensive training for each dataset, sampler, and network, which limits their practical applicability. To address this limitation, we propose a straightforward distillation approach, Distilled-ODE solvers (D-ODE solvers), that optimizes the ODE solver rather than training the denoising network. D-ODE solvers are formulated by simply applying a single parameter adjustment to existing ODE solvers. Subsequently, D-ODE solvers with smaller steps are optimized by ODE solvers with larger steps through distillation over a batch of samples. Our comprehensive experiments indicate that D-ODE solvers outperform existing ODE solvers, including DDIM, PNDM, DPM-Solver, DEIS, and EDM, especially when generating samples with fewer steps. Our method incur negligible computational overhead compared to previous distillation techniques, enabling simple and rapid integration with previous samplers. Qualitative analysis further shows that D-ODE solvers enhance image quality while preserving the sampling trajectory of ODE solvers.

Existing KBQA methods have traditionally relied on multi-stage methodologies, involving tasks such as entity linking, subgraph retrieval and query structure generation. However, multi-stage approaches are dependent on the accuracy of preceding steps, leading to cascading errors and increased inference time. Although a few studies have explored the use of end-to-end models, they often suffer from lower accuracy and generate inoperative query that is not supported by the underlying data. Furthermore, most prior approaches are limited to the static training data, potentially overlooking the evolving nature of knowledge bases over time. To address these challenges, we present a novel end-to-end natural language to SPARQL framework, SPARKLE. Notably SPARKLE leverages the structure of knowledge base directly during the decoding, effectively integrating knowledge into the query generation. Our study reveals that simply referencing knowledge base during inference significantly reduces the occurrence of inexecutable query generations. SPARKLE achieves new state-of-the-art results on SimpleQuestions-Wiki and highest F1 score on LCQuAD 1.0 (among models not using gold entities), while getting slightly lower result on the WebQSP dataset. Finally, we demonstrate SPARKLE's fast inference speed and its ability to adapt when the knowledge base differs between the training and inference stages.

The combination of deep learning, artist-curated scans, and Implicit Functions (IF), is enabling the creation of detailed, clothed, 3D humans from images. However, existing methods are far from perfect. IF-based methods recover free-form geometry, but produce disembodied limbs or degenerate shapes for novel poses or clothes. To increase robustness for these cases, existing work uses an explicit parametric body model to constrain surface reconstruction, but this limits the recovery of free-form surfaces such as loose clothing that deviates from the body. What we want is a method that combines the best properties of implicit representation and explicit body regularization. To this end, we make two key observations: (1) current networks are better at inferring detailed 2D maps than full-3D surfaces, and (2) a parametric model can be seen as a "canvas" for stitching together detailed surface patches. Based on these, our method, ECON, has three main steps: (1) It infers detailed 2D normal maps for the front and back side of a clothed person. (2) From these, it recovers 2.5D front and back surfaces, called d-BiNI, that are equally detailed, yet incomplete, and registers these w.r.t. each other with the help of a SMPL-X body mesh recovered from the image. (3) It "inpaints" the missing geometry between d-BiNI surfaces. If the face and hands are noisy, they can optionally be replaced with the ones of SMPL-X. As a result, ECON infers high-fidelity 3D humans even in loose clothes and challenging poses. This goes beyond previous methods, according to the quantitative evaluation on the CAPE and Renderpeople datasets. Perceptual studies also show that ECON's perceived realism is better by a large margin. Code and models are available for research purposes at econ.is.tue.mpg.de

Direct Preference Optimization (DPO) is a principled, scalable alternative to RLHF for aligning large language models from pairwise preferences, but its internal geometric footprint remains undercharacterized, limiting audits, checkpoint comparisons, and failure prediction. We introduce SPINAL (Scaling-law and Preference Integration in Neural Alignment Layers), a diagnostic that measures how alignment reshapes representations across depth by tracing localized structural change layer by layer. Across model families, DPO produces a layerwise calibration effect concentrated in the final decoder blocks (often layers 21-30), where preference gradients most directly affect the next-token distribution. SPINAL encodes each checkpoint as a depth trace over (layer index, contraction score, transport score). The contraction score summarizes how quickly the tail of a layer's spectrum decays (how fast small modes vanish); higher values indicate stronger contraction into fewer effective directions. The transport score summarizes how much the token distribution shifts between adjacent layers using a bounded overlap measure; lower values indicate shorter, smoother steps through representation space. Aligned checkpoints show a late-layer ramp-up in contraction and a smooth reduction in transport, consistent with tightened and stabilized policy mass, while unaligned models trace higher-curvature, more entropic, and geometrically incoherent depth paths. Overall, alignment is geometrically localized: the final layers encode the dominant preference-induced corrections. SPINAL turns this localization into a practical audit signal, quantifying where alignment concentrates, how strongly it manifests, and when it begins to destabilize during training.

Multi-agent systems (MAS) powered by LLMs promise adaptive, reasoning-driven enterprise workflows, yet granting agents autonomous control over tools, memory, and communication introduces attack surfaces absent from deterministic pipelines. While current research largely addresses prompt-level exploits and narrow individual vectors, it lacks a holistic architectural model for enterprise-grade security. We introduce AgenticCyOps (Securing Multi-Agentic AI Integration in Enterprise Cyber Operations), a framework built on a systematic decomposition of attack surfaces across component, coordination, and protocol layers, revealing that documented vectors consistently trace back to two integration surfaces: tool orchestration and memory management. Building on this observation, we formalize these integration surfaces as primary trust boundaries and define five defensive principles: authorized interfaces, capability scoping, verified execution, memory integrity & synchronization, and access-controlled data isolation; each aligned with established compliance standards (NIST, ISO 27001, GDPR, EU AI Act). We apply the framework to a Security Operations Center (SOC) workflow, adopting the Model Context Protocol (MCP) as the structural basis, with phase-scoped agents, consensus validation loops, and per-organization memory boundaries. Coverage analysis, attack path tracing, and trust boundary assessment confirm that the design addresses the documented attack vectors with defense-in-depth, intercepts three of four representative attack chains within the first two steps, and reduces exploitable trust boundaries by a minimum of 72% compared to a flat MAS, positioning AgenticCyOps as a foundation for securing enterprise-grade integration.

Time-domain simulations are crucial for ensuring power system stability and avoiding critical scenarios that could lead to blackouts. The next-generation power systems require a significant increase in the computational cost and complexity of these simulations due to additional degrees of uncertainty, non-linearity and states. Physics-Informed Neural Networks (PINN) have been shown to accelerate single-component simulations by several orders of magnitude. However, their application to current time-domain simulation solvers has been particularly challenging since the system's dynamics depend on multiple components. Using a new training formulation, this paper introduces the first natural step to integrate PINNs into multi-component time-domain simulations. We propose PINNs as an alternative to other classical numerical methods for individual components. Once trained, these neural networks approximate component dynamics more accurately for longer time steps. Formulated as an implicit and consistent method with the transient simulation workflow, PINNs speed up simulation time by significantly increasing the time steps used. For explanation clarity, we demonstrate the training, integration, and simulation framework for several combinations of PINNs and numerical solution methods using the IEEE 9-bus system, although the method applies equally well to any power system size.

To support future intelligent multifunctional sixth-generation (6G) wireless communication networks, Synesthesia of Machines (SoM) is proposed as a novel paradigm for artificial intelligence (AI)-native intelligent multi-modal sensing-communication integration. However, existing SoM system designs rely on task-specific AI models and face challenges such as scarcity of massive high-quality datasets, constrained modeling capability, poor generalization, and limited universality. Recently, foundation models (FMs) have emerged as a new deep learning paradigm and have been preliminarily applied to SoM-related tasks, but a systematic design framework is still lacking. In this paper, we for the first time present a systematic categorization of FMs for SoM system design, dividing them into general-purpose FMs, specifically large language models (LLMs), and SoM domain-specific FMs, referred to as wireless foundation models. Furthermore, we derive key characteristics of FMs in addressing existing challenges in SoM systems and propose two corresponding roadmaps, i.e., LLM-based and wireless foundation model-based design. For each roadmap, we provide a framework containing key design steps as a guiding pipeline and several representative case studies of FM-empowered SoM system design. Specifically, we propose LLM-based path loss generation (LLM4PG) and scatterer generation (LLM4SG) schemes, and wireless channel foundation model (WiCo) for SoM mechanism exploration, LLM-based wireless multi-task SoM transceiver (LLM4WM) and wireless foundation model (WiFo) for SoM-enhanced transceiver design, and wireless cooperative perception foundation model (WiPo) for SoM-enhanced cooperative perception, demonstrating the significant superiority of FMs over task-specific models. Finally, we summarize and highlight potential directions for future research.

Vision-language models (VLMs) lag behind text-only language models on mathematical reasoning when the same problems are presented as images rather than text. We empirically characterize this as a modality gap: the same question in text form yields markedly higher accuracy than its visually typeset counterpart, due to compounded failures in reading dense formulas, layout, and mixed symbolic-diagrammatic context. First, we introduce VisTIRA (Vision and Tool-Integrated Reasoning Agent), a tool-integrated reasoning framework that enables structured problem solving by iteratively decomposing a given math problem (as an image) into natural language rationales and executable Python steps to determine the final answer. Second, we build a framework to measure and improve visual math reasoning: a LaTeX-based pipeline that converts chain-of-thought math corpora (e.g., NuminaMath) into challenging image counterparts, and a large set of synthetic tool-use trajectories derived from a real-world, homework-style image dataset (called SnapAsk) for fine-tuning VLMs. Our experiments show that tool-integrated supervision improves image-based reasoning, and OCR grounding can further narrow the gap for smaller models, although its benefit diminishes at scale. These findings highlight that modality gap severity inversely correlates with model size, and that structured reasoning and OCR-based grounding are complementary strategies for advancing visual mathematical reasoning.

In this paper, we introduce SaulLM-54B and SaulLM-141B, two large language models (LLMs) tailored for the legal sector. These models, which feature architectures of 54 billion and 141 billion parameters, respectively, are based on the Mixtral architecture. The development of SaulLM-54B and SaulLM-141B is guided by large-scale domain adaptation, divided into three strategies: (1) the exploitation of continued pretraining involving a base corpus that includes over 540 billion of legal tokens, (2) the implementation of a specialized legal instruction-following protocol, and (3) the alignment of model outputs with human preferences in legal interpretations. The integration of synthetically generated data in the second and third steps enhances the models' capabilities in interpreting and processing legal texts, effectively reaching state-of-the-art performance and outperforming previous open-source models on LegalBench-Instruct. This work explores the trade-offs involved in domain-specific adaptation at this scale, offering insights that may inform future studies on domain adaptation using strong decoder models. Building upon SaulLM-7B, this study refines the approach to produce an LLM better equipped for legal tasks. We are releasing base, instruct, and aligned versions on top of SaulLM-54B and SaulLM-141B under the MIT License to facilitate reuse and collaborative research.

Large language models (LLMs) have demonstrated strong capabilities in language understanding and reasoning, yet they remain limited when tackling real-world tasks that require up-to-date knowledge, precise operations, or specialized tool use. To address this, we propose Tool-R1, a reinforcement learning framework that enables LLMs to perform general, compositional, and multi-step tool use by generating executable Python code. Tool-R1 supports integration of user-defined tools and standard libraries, with variable sharing across steps to construct coherent workflows. An outcome-based reward function, combining LLM-based answer judgment and code execution success, guides policy optimization. To improve training efficiency, we maintain a dynamic sample queue to cache and reuse high-quality trajectories, reducing the overhead of costly online sampling. Experiments on the GAIA benchmark show that Tool-R1 substantially improves both accuracy and robustness, achieving about 10\% gain over strong baselines, with larger improvements on complex multi-step tasks. These results highlight the potential of Tool-R1 for enabling reliable and efficient tool-augmented reasoning in real-world applications. Our code will be available at https://github.com/YBYBZhang/Tool-R1.

This technical report introduces PIXART-{\delta}, a text-to-image synthesis framework that integrates the Latent Consistency Model (LCM) and ControlNet into the advanced PIXART-{\alpha} model. PIXART-{\alpha} is recognized for its ability to generate high-quality images of 1024px resolution through a remarkably efficient training process. The integration of LCM in PIXART-{\delta} significantly accelerates the inference speed, enabling the production of high-quality images in just 2-4 steps. Notably, PIXART-{\delta} achieves a breakthrough 0.5 seconds for generating 1024x1024 pixel images, marking a 7x improvement over the PIXART-{\alpha}. Additionally, PIXART-{\delta} is designed to be efficiently trainable on 32GB V100 GPUs within a single day. With its 8-bit inference capability (von Platen et al., 2023), PIXART-{\delta} can synthesize 1024px images within 8GB GPU memory constraints, greatly enhancing its usability and accessibility. Furthermore, incorporating a ControlNet-like module enables fine-grained control over text-to-image diffusion models. We introduce a novel ControlNet-Transformer architecture, specifically tailored for Transformers, achieving explicit controllability alongside high-quality image generation. As a state-of-the-art, open-source image generation model, PIXART-{\delta} offers a promising alternative to the Stable Diffusion family of models, contributing significantly to text-to-image synthesis.

Diffusion models suffer from substantial computational overhead due to their inherently iterative inference process. While feature caching offers a promising acceleration strategy by reusing intermediate outputs across timesteps, naive reuse often incurs noticeable quality degradation. In this work, we formally analyze the cumulative error introduced by caching and decompose it into two principal components: feature shift error, caused by inaccuracies in cached outputs, and step amplification error, which arises from error propagation under fixed timestep schedules. To address these issues, we propose ERTACache, a principled caching framework that jointly rectifies both error types. Our method employs an offline residual profiling stage to identify reusable steps, dynamically adjusts integration intervals via a trajectory-aware correction coefficient, and analytically approximates cache-induced errors through a closed-form residual linearization model. Together, these components enable accurate and efficient sampling under aggressive cache reuse. Extensive experiments across standard image and video generation benchmarks show that ERTACache achieves up to 2x inference speedup while consistently preserving or even improving visual quality. Notably, on the state-of-the-art Wan2.1 video diffusion model, ERTACache delivers 2x acceleration with minimal VBench degradation, effectively maintaining baseline fidelity while significantly improving efficiency. The code is available at https://github.com/bytedance/ERTACache.

Multi-modal reasoning requires the seamless integration of visual and linguistic cues, yet existing Chain-of-Thought methods suffer from two critical limitations in cross-modal scenarios: (1) over-reliance on single coarse-grained image regions, and (2) semantic fragmentation between successive reasoning steps. To address these issues, we propose the CoCoT (Collaborative Coross-modal Thought) framework, built upon two key innovations: a) Dynamic Multi-Region Grounding to adaptively detect the most relevant image regions based on the question, and b) Relation-Aware Reasoning to enable multi-region collaboration by iteratively aligning visual cues to form a coherent and logical chain of thought. Through this approach, we construct the CoCoT-70K dataset, comprising 74,691 high-quality samples with multi-region annotations and structured reasoning chains. Extensive experiments demonstrate that CoCoT significantly enhances complex visual reasoning, achieving an average accuracy improvement of 15.4% on LLaVA-1.5 and 4.0% on Qwen2-VL across six challenging benchmarks. The data and code are available at: https://github.com/deer-echo/CoCoT.

We present MarsFM, an image-conditioned latent flow-matching model for local Martian relief estimation from single-band HiRISE RED orthoimagery. The method combines a pretrained generative prior with stereo-derived geometric supervision and a differentiable Lunar--Lambert shading objective. Relief, normal, gradient, curvature, and ordinal terms constrain complementary aspects of terrain structure, while a positive-affine-invariant image comparison constrains rendered appearance. An evaluation comprising 2024 gathered patch records per integration-step count yields mean affine-aligned RMSE between 0.0935 and 0.0957 in normalized signed-log relief space for one to twenty Euler steps. These scores measure agreement with VAE-reconstructed references on positive-reference support. Their narrow range supports low-step inference under this protocol. Spatial, differential, and spectral diagnostics show broad terrain correspondence alongside smoothing, amplitude compression, and boundary mismatch. MarsFM provides a framework for combining learned terrain priors with image-based constraints; establishing improved physical terrain resolution requires matched baselines and independent high-resolution reference data. Data: https://huggingface.co/datasets/SuperComputer/mars_hirise_dtm_processed-6aa9b66ba461e07f; code: https://github.com/Marius-Juston/MarsRecon.

Reference-based sketch colorization methods have garnered significant attention due to their potential applications in the animation production industry. However, most existing methods are trained with image triplets of sketch, reference, and ground truth that are semantically and spatially well-aligned, while real-world references and sketches often exhibit substantial misalignment. This mismatch in data distribution between training and inference leads to overfitting, consequently resulting in spatial artifacts and significant degradation in overall colorization quality, limiting potential applications of current methods for general purposes. To address this limitation, we conduct an in-depth analysis of the carrier, defined as the latent representation facilitating information transfer from reference to sketch. Based on this analysis, we propose a novel workflow that dynamically adapts the carrier to optimize distinct aspects of colorization. Specifically, for spatially misaligned artifacts, we introduce a split cross-attention mechanism with spatial masks, enabling region-specific reference injection within the diffusion process. To mitigate semantic neglect of sketches, we employ dedicated background and style encoders to transfer detailed reference information in the latent feature space, achieving enhanced spatial control and richer detail synthesis. Furthermore, we propose character-mask merging and background bleaching as preprocessing steps to improve foreground-background integration and background generation. Extensive qualitative and quantitative evaluations, including a user study, demonstrate the superior performance of our proposed method compared to existing approaches. An ablation study further validates the efficacy of each proposed component.

Monocular 3D human pose estimation remains a challenging task due to inherent depth ambiguities and occlusions. Compared to traditional methods based on Transformers or Convolutional Neural Networks (CNNs), recent diffusion-based approaches have shown superior performance, leveraging their probabilistic nature and high-fidelity generation capabilities. However, these methods often fail to account for the spatial and temporal correlations across predicted frames, resulting in limited temporal consistency and inferior accuracy in predicted 3D pose sequences. To address these shortcomings, this paper proposes StarPose, an autoregressive diffusion framework that effectively incorporates historical 3D pose predictions and spatial-temporal physical guidance to significantly enhance both the accuracy and temporal coherence of pose predictions. Unlike existing approaches, StarPose models the 2D-to-3D pose mapping as an autoregressive diffusion process. By synergically integrating previously predicted 3D poses with 2D pose inputs via a Historical Pose Integration Module (HPIM), the framework generates rich and informative historical pose embeddings that guide subsequent denoising steps, ensuring temporally consistent predictions. In addition, a fully plug-and-play Spatial-Temporal Physical Guidance (STPG) mechanism is tailored to refine the denoising process in an iterative manner, which further enforces spatial anatomical plausibility and temporal motion dynamics, rendering robust and realistic pose estimates. Extensive experiments on benchmark datasets demonstrate that StarPose outperforms state-of-the-art methods, achieving superior accuracy and temporal consistency in 3D human pose estimation. Code is available at https://github.com/wileychan/StarPose.

The rapid development of generative models has significantly advanced image and video applications. Among these, video creation, aimed at generating videos under various conditions, has gained substantial attention. However, existing video creation models either focus solely on a few specific conditions or suffer from excessively long generation times due to complex model inference, making them impractical for real-world applications. To mitigate these issues, we propose an efficient unified video creation model, named VDOT. Concretely, we model the training process with the distribution matching distillation (DMD) paradigm. Instead of using the Kullback-Leibler (KL) minimization, we additionally employ a novel computational optimal transport (OT) technique to optimize the discrepancy between the real and fake score distributions. The OT distance inherently imposes geometric constraints, mitigating potential zero-forcing or gradient collapse issues that may arise during KL-based distillation within the few-step generation scenario, and thus, enhances the efficiency and stability of the distillation process. Further, we integrate a discriminator to enable the model to perceive real video data, thereby enhancing the quality of generated videos. To support training unified video creation models, we propose a fully automated pipeline for video data annotation and filtering that accommodates multiple video creation tasks. Meanwhile, we curate a unified testing benchmark, UVCBench, to standardize evaluation. Experiments demonstrate that our 4-step VDOT outperforms or matches other baselines with 100 denoising steps.

Generative speech enhancement offers a promising alternative to traditional discriminative methods by modeling the distribution of clean speech conditioned on noisy inputs. Post-training alignment via reinforcement learning (RL) effectively aligns generative models with human preferences and downstream metrics in domains such as natural language processing, but its use in speech enhancement remains limited, especially for online RL. Prior work explores offline methods like Direct Preference Optimization (DPO); online methods such as Group Relative Policy Optimization (GRPO) remain largely uninvestigated. In this paper, we present the first successful integration of online GRPO into a flow-matching speech enhancement framework, enabling efficient post-training alignment to perceptual and task-oriented metrics with few update steps. Unlike prior GRPO work on Large Language Models, we adapt the algorithm to the continuous, time-series nature of speech and to the dynamics of flow-matching generative models. We show that optimizing a single reward yields rapid metric gains but often induces reward hacking that degrades audio fidelity despite higher scores. To mitigate this, we propose a multi-metric reward optimization strategy that balances competing objectives, substantially reducing overfitting and improving overall performance. Our experiments validate online GRPO for speech enhancement and provide practical guidance for RL-based post-training of generative audio models.

Vision-language-action (VLA) models face a timing gap between low-rate inference and high-rate robot execution. We characterize this gap through end-to-end latency measurements of model inference and the robot execution chain. Repeated Flow Matching denoising contributes substantially to inference cost, while robot-side delays mainly arise from perception acquisition, communication scheduling, and physical response. Analysis of the velocity field shows relatively stable magnitude and direction in early integration, followed by stronger directional correction near the terminal steps. Based on this stage heterogeneity, we propose two-stage non-uniform denoising, reducing the number of steps from 10 to 2 and model-inference time from 61.557 ms to 21.956 ms. We also develop a distributed real-time VLA framework with independent inference, action-publication, and robot-control rates, modular observation acquisition, and action-provenance logging. Using π0.5 as the baseline, we evaluate six real-time execution methods on a long-horizon physical garment-folding task. Legato performs best overall among training-based methods, while Temporal Smoothing leads among training-free methods; both perform strongly in task success, completion time, action continuity, and acceleration smoothness. Combining two-step denoising with representative execution methods substantially reduces inference cost with a small reduction in task performance. These results motivate joint optimization of model-inference efficiency and robot-system timing.

Many computational factors limit broader deployment of large language models. In this paper, we focus on a memory bottleneck imposed by the key-value (KV) cache, a computational shortcut that requires storing previous KV pairs during decoding. While existing KV cache methods approach this problem by pruning or evicting large swaths of relatively less important KV pairs to dramatically reduce the memory footprint of the cache, they can have limited success in tasks that require recollecting a majority of previous tokens. To alleviate this issue, we propose LESS, a simple integration of a (nearly free) constant sized cache with eviction-based cache methods, such that all tokens can be queried at later decoding steps. Its ability to retain information throughout time shows merit on a variety of tasks where we demonstrate LESS can help reduce the performance gap from caching everything, sometimes even matching it, all while being efficient.

The inference efficiency of diffusion large language models (dLLMs) is constrained by two challenges: bidirectional attention precludes efficient KV-cache reuse, while increasing decoding parallelism with static confidence thresholds can compromise generation quality. We observe that both challenges arise from a shared phenomenon: as tokens are decoded, their contextual integration through bidirectional attention causes token representations to drift (evolve) across decoding steps. This insight motivates Polestar, a training-free inference framework that uses token representation drift as a unified signal to jointly address both challenges. Polestar comprises two components: Polestar-Cache, which identifies stale KV-cache positions via drift and performs sparse KV-cache refreshes to enable efficient reuse, and Polestar-Commit, which detects sharp drift events to reliably identify commit-ready tokens. Across mathematics and coding benchmarks on several dLLM families, Polestar sets a new state of the art on the accuracy-throughput Pareto frontier, achieving up to 10.73% accuracy improvement, up to 3.7x higher throughput, and high decoding parallelism of 3.67 tokens per forward pass over existing baselines.

Magnetic Resonance Imaging (MRI) is often acquired with anisotropic resolution to reduce scan time, producing stair-step artifacts along the through-plane direction. In through-plane MRI super-resolution, an efficiency-fidelity trade-off arises: feed-forward regressors are fast but oversmooth at large slice-thicknesses, while sampling-based methods improve fidelity at high inference cost. We propose DRIFT, a two-stage thickness-conditioned rectified flow framework for through-plane MRI super-resolution with continuous input slice-thickness. Stage 1 employs an Anatomical Projection Network (APN) to map low-resolution patches to a coarse high-resolution manifold, providing a deterministic anatomical initialization that shortens the residual transport of Stage 2 and stabilizes slice-wise refinement. Stage 2 refines details via rectified flow and introduces a Physics-Aware Difficulty (PAD) metric derived from slice-thickness induced through-plane bandwidth deficit to guide an Adaptive Integration Scheduler (AIS), allocating ODE steps by thickness. A Consistent Endpoint Trajectory Alignment (CETA) loss enforces thickness-consistent reconstructions. Experiments show that DRIFT outperforms super-resolution baselines while reducing inference cost. Code, models, and interactive demos are available at https://yoonseokchoi-ai.github.io/drift-eccv2026/.

We present SpiralMLP, a novel architecture that introduces a Spiral FC layer as a replacement for the conventional Token Mixing approach. Differing from several existing MLP-based models that primarily emphasize axes, our Spiral FC layer is designed as a deformable convolution layer with spiral-like offsets. We further adapt Spiral FC into two variants: Self-Spiral FC and Cross-Spiral FC, which enable both local and global feature integration seamlessly, eliminating the need for additional processing steps. To thoroughly investigate the effectiveness of the spiral-like offsets and validate our design, we conduct ablation studies and explore optimal configurations. In empirical tests, SpiralMLP reaches state-of-the-art performance, similar to Transformers, CNNs, and other MLPs, benchmarking on ImageNet-1k, COCO and ADE20K. SpiralMLP still maintains linear computational complexity O(HW) and is compatible with varying input image resolutions. Our study reveals that targeting the full receptive field is not essential for achieving high performance, instead, adopting a refined approach offers better results.

Retrieval-Augmented Generation (RAG), by integrating non-parametric knowledge from external knowledge bases into models, has emerged as a promising approach to enhancing response accuracy while mitigating factual errors and hallucinations. This method has been widely applied in tasks such as Question Answering (QA). However, existing RAG methods struggle with open-domain QA tasks because they perform independent retrieval operations and directly incorporate the retrieved information into generation without maintaining a summarizing memory or using adaptive retrieval strategies, leading to noise from redundant information and insufficient information integration. To address these challenges, we propose Adaptive memory-based optimization for enhanced RAG (Amber) for open-domain QA tasks, which comprises an Agent-based Memory Updater, an Adaptive Information Collector, and a Multi-granular Content Filter, working together within an iterative memory updating paradigm. Specifically, Amber integrates and optimizes the language model's memory through a multi-agent collaborative approach, ensuring comprehensive knowledge integration from previous retrieval steps. It dynamically adjusts retrieval queries and decides when to stop retrieval based on the accumulated knowledge, enhancing retrieval efficiency and effectiveness. Additionally, it reduces noise by filtering irrelevant content at multiple levels, retaining essential information to improve overall model performance. We conduct extensive experiments on several open-domain QA datasets, and the results demonstrate the superiority and effectiveness of our method and its components. The source code is available https://anonymous.4open.science/r/Amber-B203/.

Real-world spatial intelligence requires reasoning over a continuous and evolving 3D world, yet existing VLMs and tool-augmented agents largely remain tied to static, stateless inference from isolated visual observations. We introduce \textsc{S-Agent}, a spatial tool-use agentic paradigm for understanding and reasoning over continuous multi-view images and videos. By formulating spatial reasoning as spatio-temporal evidence accumulation rather than isolated frame-level prediction, S-Agent reshapes spatial perception into scene-centric understanding beyond frame-centric recognition. Specifically, S-Agent casts the VLM as a semantic planner that decides what evidence is needed, while a hierarchy of spatial tools and experts grounds objects in 2D, lifts them into 3D geometric evidence, and aggregates this evidence into high-level spatial knowledge (e.g., counting, measurement, orientation, and relative position). Additionally, a temporal memory mechanism, including Scene Memory for maintaining the evolving scene state and Agent Memory for accumulating reasoning context, enables evidence integration across frames and reasoning steps. Comprehensive experiments on multi-view and video spatial reasoning benchmarks show that S-Agent consistently improves both open-source and closed-source VLMs in a training-free manner. Beyond inference-time augmentation, supervised fine-tuning (SFT) on S-Agent-generated spatial trajectories S-300K yields S-Agent-8B, a compact spatial agent that significantly surpasses similar-scale baselines (e.g., Qwen3-VL-8B) and performs comparably to advanced closed-source models (e.g., GPT-5.4 and Gemini 3).

Recent studies have shown that Large Language Models (LLMs) can achieve strong reasoning performance by incorporating functional symbolic representations that abstractly describe graph traversal algorithms and step-by-step reasoning in few-shot learning settings. However, it remains unclear how LLMs genuinely understand the abstract meaning of each reasoning step and the overall algorithm from only a limited number of demonstrations. This work aims to localize the attention heads responsible for individual reasoning steps and characterize the types of information transferred among them. We first align constituent reasoning steps with their corresponding token logits under a symbolic-aided Chain-of-Thought (CoT) prompting framework. Our analysis shows that token positions that steer the reasoning process are associated with low confidence scores caused by constraints on satisfying reasoning behavior patterns in demonstrations. We then adopt causal mediation analysis techniques to identify the attention heads responsible for these patterns. In addition, our findings indicate that LLMs retrieve factual and rule-based information for individual sub-reasoning tasks through specialized attention heads (approximately 3% total heads), whereas higher layers predominantly facilitate information integration and the emergence of global reasoning strategies (e.g., graph traversal algorithms) that coordinate multiple intermediate reasoning steps to solve the overall task.

The advent of one-step text-to-image (T2I) models offers unprecedented synthesis speed. However, their application to text-guided image editing remains severely hampered, as forcing existing training-free editors into a single inference step fails. This failure manifests as severe object distortion and a critical loss of consistency in non-edited regions, resulting from the high-energy, erratic trajectories produced by naive vector arithmetic on the models' structured fields. To address this problem, we introduce ChordEdit, a model agnostic, training-free, and inversion-free method that facilitates high-fidelity one-step editing. We recast editing as a transport problem between the source and target distributions defined by the source and target text prompts. Leveraging dynamic optimal transport theory, we derive a principled, low-energy control strategy. This strategy yields a smoothed, variance-reduced editing field that is inherently stable, facilitating the field to be traversed in a single, large integration step. A theoretically grounded and experimentally validated approach allows ChordEdit to deliver fast, lightweight and precise edits, finally achieving true real-time editing on these challenging models.

An agent whose tool keeps returning nothing useful should stop relying on it. In a retrieval environment with controlled source failures, we separate how agents judge results from what they do. We compare stopping at the same step after longer and shorter runs of results the agent judged useless; this contrast is zero for clock- or deadline-driven stopping. Where we record their judgments, the seven agents we test call a failing source's results useless 97-100% of the time, yet most of them rarely stop on that judgment. Prompt cues change when they stop but not what they stop on. Permission to answer from memory and a reasoning mode can bring early stops regardless of evidence, a stated budget moves the 7-8B models' stops to the deadline, and a stopping rule or call cost in the prompt is followed at most partly. Stopping follows the evidence only when the harness enforces an integration step that makes the agent answer after five consecutive results it judged useless. This step raises failing-source success for every model, keeps the stopping point fixed when the budget doubles, and needs no extra judgment call when the agent states its judgments. A pre-registered replication on 300 fresh questions confirms the dissociation and the rule's effect.

Learning-based simulation of multi-object rigid-body dynamics remains difficult because contact is discontinuous and errors compound over long horizons. Most existing methods remain tied to mesh connectivity and vertex-level message passing, which limits their applicability to mesh-free inputs such as point clouds and leads to high computational cost. Efficiently modeling high-fidelity rigid-body dynamics from mesh-free representations, therefore, remains challenging. We introduce RigidFormer, an object-centric Transformer-based model that learns mesh-free rigid-body dynamics with controllable integration step sizes. RigidFormer reasons at the object level and advances each object through compact anchors; Anchor-Vertex Pooling enriches these anchors with local vertex features, retaining contact-relevant geometry without dense vertex-level interaction. We propose Anchor-based RoPE to inject anchor geometry into attention while respecting the unordered nature of objects and anchors: object-token processing is permutation-equivariant, and the mean-pooled anchor descriptor is invariant to anchor reindexing while preserving shape extent. RigidFormer further enforces rigidity by projecting updates onto the rigid-body manifold using differentiable Kabsch alignment. On standard benchmarks, RigidFormer outperforms or matches mesh-based baselines using point inputs, runs faster, generalizes to unseen point resolutions and across datasets, and scales to 200+ objects; we also show a preliminary extension to command-conditioned articulated bodies by treating body parts as interacting object-level components.

Generating an image with a diffusion or flow-matching model typically involves integrating a velocity field for hundreds of sequential steps. That computation suits a GPU poorly and an analog neuromorphic substrate well, where one fast, low-power physical relaxation could replace the whole sequence. Two things are needed: a generative algorithm whose computation is a relaxation, and a way to train it without backpropagation, whose global gradient transport is hard to realise in analog. Energy Matching supplies the first, sampling by gradient-descent relaxation on a time-independent potential - but obtaining the gradient that descent follows is itself a backward pass, once per integration step. We prove that a predictive coding network with a single linear injection term added to its energy relaxes to a state whose visible layer carries that gradient inherently, with an error that vanishes for small injection strengths. An Energy Matching model trained by backpropagation can therefore be loaded into this network unchanged and sampled by relaxation alone, matching the original model's FID to within 0.04 at CIFAR-10 and ImageNet-32 scale. The network can also be trained without backpropagation: Equilibrium Propagation reproduces backpropagation's parameter updates to a cosine similarity of 0.9998, and training end to end with those updates reaches an FID of 3.64 on unconditional CIFAR-10 against 3.54 for backpropagation. To our knowledge this is the first CIFAR-10 generative model trained with Equilibrium Propagation, and the first at competitive quality by any backpropagation-free rule. This quality does not require group normalisation or attention: an architecture of only convolutions and pointwise nonlinearities, both native to an analog crossbar, reaches an FID of 3.51 when trained by backpropagation.

Many problems in astrophysics cover multiple orders of magnitude in spatial and temporal scales. While simulating systems that experience rapid changes in these conditions, it is essential to adapt the (time-) step size to capture the behavior of the system during those rapid changes and use a less accurate time step at other, less demanding, moments. We encounter three problems with traditional methods. Firstly, making such changes requires expert knowledge of the astrophysics as well as of the details of the numerical implementation. Secondly, some parameters that determine the time-step size are fixed throughout the simulation, which means that they do not adapt to the rapidly changing conditions of the problem. Lastly, we would like the choice of time-step size to balance accuracy and computation effort. We address these challenges with Reinforcement Learning by training it to select the time-step size dynamically. We use the integration of a system of three equal-mass bodies that move due to their mutual gravity as an example of its application. With our method, the selected integration parameter adapts to the specific requirements of the problem, both in terms of computation time and accuracy while eliminating the expert knowledge needed to set up these simulations. Our method produces results competitive to existing methods and improve the results found with the most commonly-used values of time-step parameter. This method can be applied to other integrators without further retraining. We show that this extrapolation works for variable time-step integrators but does not perform to the desired accuracy for fixed time-step integrators.

MLMOD is a software package for incorporating machine learning approaches and models into simulations of microscale mechanics and molecular dynamics in LAMMPS. Recent machine learning approaches provide promising data-driven approaches for learning representations for system behaviors from experimental data and high fidelity simulations. The package faciliates learning and using data-driven models for (i) dynamics of the system at larger spatial-temporal scales (ii) interactions between system components, (iii) features yielding coarser degrees of freedom, and (iv) features for new quantities of interest characterizing system behaviors. MLMOD provides hooks in LAMMPS for (i) modeling dynamics and time-step integration, (ii) modeling interactions, and (iii) computing quantities of interest characterizing system states. The package allows for use of machine learning methods with general model classes including Neural Networks, Gaussian Process Regression, Kernel Models, and other approaches. Here we discuss our prototype C++/Python package, aims, and example usage. The package is integrated currently with the mesocale and molecular dynamics simulation package LAMMPS and PyTorch. For related papers, examples, updates, and additional information see https://github.com/atzberg/mlmod and http://atzberger.org/.

Inference-time scaling techniques have shown promise in enhancing the reasoning capabilities of large language models (LLMs). While recent research has primarily focused on training-time optimization, our work highlights inference-time reward model (RM)-based reasoning as a critical yet overlooked avenue. In this paper, we conduct a systematic analysis of RM behavior across downstream reasoning tasks, revealing three key limitations: (1) RM can impair performance on simple questions, (2) its discriminative ability declines with increased sampling, and (3) high search diversity undermines RM performance. To address these issues, we propose CRISP (Clustered Reward Integration with Stepwise Prefixing), a novel inference-time algorithm that clusters generated reasoning paths by final answers, aggregates reward signals at the cluster level, and adaptively updates prefix prompts to guide generation. Experimental results demonstrate that CRISP significantly enhances LLM reasoning performance, achieving up to 5% accuracy improvement over other RM-based inference methods and an average of 10% gain over advanced reasoning models.

Irregular multivariate time series impose a trade-off for long-horizon forecasting: discrete methods can distort temporal structure via re-gridding, while continuous-time models often require sequential solvers prone to drift. To bridge this gap, we present Latent Laplace Diffusion (LLapDiff), a generative framework that models the target as a low-dimensional latent trajectory, enabling horizon-wide generation without step-by-step integration over physical time. We guide the reverse process utilizing a stable modal parameterization motivated by stochastic port-Hamiltonian dynamics, and parameterize its mean evolution in the Laplace domain via learnable complex-conjugate poles, enabling direct evaluation over irregular timestamps. We also link continuous dynamics to irregular observations through renewal-averaging analysis, which maps sampling gaps to effective event-domain poles and motivates a gap-aware history summarizer. Extensive experiments show that LLapDiff improves over baselines in long-horizon forecasting, and its continuous-time generative nature supports missing-value imputation by querying the same model at historical timestamps. Code is available at https://github.com/pixelhero98/LLapDiffusion.

The CAD design process includes a number of repetitive steps when creating assemblies. This issue is compounded when engineering whole product lines or design families, as steps like inserting parts common to all variations, such as fasteners and product-integral base parts, get repeated numerous times. This makes creating designs time-, and as a result, cost-intensive. While many CAD software packages have APIs, the effort of creating use-case specific plugins to automate creation of assemblies usually outweighs the benefit. We developed a plugin for the CAD software package "Fusion 360" which tackles this issue. The plugin adds several graphical interfaces to Fusion 360 that allow parts to be annotated with types, subtype hierarchies to be managed, and requests to synthesize assembly programs for assemblies to be posed. The plugin is use-case agnostic and is able to generate arbitrary open kinematic chain structures. We envision engineers working with CAD software being able to make designed parts reusable and automate the generation of different design alternatives as well as whole product lines.

Recently, various methods have been proposed to address the inconsistency issue of DDIM inversion to enable image editing, such as EDICT [36] and Null-text inversion [22]. However, the above methods introduce considerable computational overhead. In this paper, we propose a new technique, named bi-directional integration approximation (BDIA), to perform exact diffusion inversion with neglible computational overhead. Suppose we would like to estimate the next diffusion state z_{i-1} at timestep t_i with the historical information (i,z_i) and (i+1,z_{i+1}). We first obtain the estimated Gaussian noise boldsymbol{epsilon}(z_i,i), and then apply the DDIM update procedure twice for approximating the ODE integration over the next time-slot [t_i, t_{i-1}] in the forward manner and the previous time-slot [t_i, t_{t+1}] in the backward manner. The DDIM step for the previous time-slot is used to refine the integration approximation made earlier when computing z_i. A nice property of BDIA-DDIM is that the update expression for z_{i-1} is a linear combination of (z_{i+1}, z_i, boldsymbol{epsilon}(z_i,i)). This allows for exact backward computation of z_{i+1} given (z_i, z_{i-1}), thus leading to exact diffusion inversion. It is demonstrated with experiments that (round-trip) BDIA-DDIM is particularly effective for image editing. Our experiments further show that BDIA-DDIM produces markedly better image sampling qualities than DDIM for text-to-image generation. BDIA can also be applied to improve the performance of other ODE solvers in addition to DDIM. In our work, it is found that applying BDIA to the EDM sampling procedure produces consistently better performance over four pre-trained models.

Thermodynamic integration (TI) offers a rigorous method for estimating free-energy differences by integrating over a sequence of interpolating conformational ensembles. However, TI calculations are computationally expensive and typically limited to coupling a small number of degrees of freedom due to the need to sample numerous intermediate ensembles with sufficient conformational-space overlap. In this work, we propose to perform TI along an alchemical pathway represented by a trainable neural network, which we term Neural TI. Critically, we parametrize a time-dependent Hamiltonian interpolating between the interacting and non-interacting systems, and optimize its gradient using a score matching objective. The ability of the resulting energy-based diffusion model to sample all intermediate ensembles allows us to perform TI from a single reference calculation. We apply our method to Lennard-Jones fluids, where we report accurate calculations of the excess chemical potential, demonstrating that Neural TI reproduces the underlying changes in free energy without the need for simulations at interpolating Hamiltonians.

We introduce Exhaustive Symbolic Integration (ESI), a method that enumerates all symbolic functions up to a given complexity k within a specified operator basis and determines which admit closed-form antiderivatives within the same class. This allows us to compute the "integrability fraction" ρ(k) (the fraction of functions whose derivatives lie within the same class), which we do for five operator bases including combinations of rational functions, powers, exponentials, logarithms and trigonometric functions. We find that ρ(k) declines at high complexity and that the operator basis has a dramatic effect -- in particular, adding the logarithm boosts ρ(k) by a factor of sim3 and produces or exacerbates a clear peak at k=6. We also deploy ESI as a novel integration algorithm, identifying three integrals that resist SymPy, Mathematica, RUBI, FriCAS, Maxima and Giac under all tested strategies. When an antiderivative can be found by multiple methods, ESI often returns the simplest form. These results reveal that the landscape of symbolic integrability is shaped primarily by the choice of operators, and that exhaustive enumeration can systematically discover integrable forms -- including novel ones -- that elude computer albegra systems.

We formulate a hierarchical rectified flow to model data distributions. It hierarchically couples multiple ordinary differential equations (ODEs) and defines a time-differentiable stochastic process that generates a data distribution from a known source distribution. Each ODE resembles the ODE that is solved in a classic rectified flow, but differs in its domain, i.e., location, velocity, acceleration, etc. Unlike the classic rectified flow formulation, which formulates a single ODE in the location domain and only captures the expected velocity field (sufficient to capture a multi-modal data distribution), the hierarchical rectified flow formulation models the multi-modal random velocity field, acceleration field, etc., in their entirety. This more faithful modeling of the random velocity field enables integration paths to intersect when the underlying ODE is solved during data generation. Intersecting paths in turn lead to integration trajectories that are more straight than those obtained in the classic rectified flow formulation, where integration paths cannot intersect. This leads to modeling of data distributions with fewer neural function evaluations. We empirically verify this on synthetic 1D and 2D data as well as MNIST, CIFAR-10, and ImageNet-32 data. Our code is available at: https://riccizz.github.io/HRF/.

In this paper, a mathematical model is developed to describe the evolution of the concentration of compounds through a gas chromatography column. The model couples mass balances and kinetic equations for all components. Both single and multiple-component cases are considered with constant or variable velocity. Non-dimensionalisation indicates the small effect of diffusion. The system where diffusion is neglected is analysed using Laplace transforms. In the multiple-component case, it is demonstrated that the competition between the compounds is negligible and the equations may be decoupled. This reduces the problem to solving a single integral equation to determine the concentration profile for all components (since they are scaled versions of each other). For a given analyte, we then only two parameters need to be fitted to the data. To verify this approach, the full governing equations are also solved numerically using the finite difference method and a global adaptive quadrature method to integrate the Laplace transformation. Comparison with the Laplace solution verifies the high degree of accuracy of the simpler Laplace form. The Laplace solution is then verified against experimental data from BTEX chromatography. This novel method, which involves solving a single equation and fitting parameters in pairs for individual components, is highly efficient. It is significantly faster and simpler than the full numerical solution and avoids the computationally expensive methods that would normally be used to fit all curves at the same time.

We present Probabilistic Structure Integration (PSI), a system for learning richly controllable and flexibly promptable world models from data. PSI consists of a three-step cycle. The first step, Probabilistic prediction, involves building a probabilistic graphical model Psi of the data, in the form of a random-access autoregressive sequence model. Psi supports a complete set of learned conditional distributions describing the dependence of any variables in the data on any other set of variables. In step 2, Structure extraction, we show how to extract underlying low-dimensional properties in the data, corresponding to a diverse set of meaningful "intermediate structures", in a zero-shot fashion via causal inference on Psi. Step 3, Integration, completes the cycle by converting these structures into new token types that are then continually mixed back into the training diet as conditioning signals and prediction targets. Each such cycle augments the capabilities of Psi, both allowing it to model the underlying data better, and creating new control handles -- akin to an LLM-like universal prompting language. We train an instance of Psi on 1.4 trillion tokens of internet video data; we use it to perform a variety of useful video prediction and understanding inferences; we extract state-of-the-art optical flow, self-supervised depth and object segmentation; and we use these structures to support a full cycle of predictive improvements.

We present ACE-Step v1.5, a highly efficient open-source music foundation model that brings commercial-grade generation to consumer hardware. On commonly used evaluation metrics, ACE-Step v1.5 achieves quality beyond most commercial music models while remaining extremely fast -- under 2 seconds per full song on an A100 and under 10 seconds on an RTX 3090. The model runs locally with less than 4GB of VRAM, and supports lightweight personalization: users can train a LoRA from just a few songs to capture their own style. At its core lies a novel hybrid architecture where the Language Model (LM) functions as an omni-capable planner: it transforms simple user queries into comprehensive song blueprints -- scaling from short loops to 10-minute compositions -- while synthesizing metadata, lyrics, and captions via Chain-of-Thought to guide the Diffusion Transformer (DiT). Uniquely, this alignment is achieved through intrinsic reinforcement learning relying solely on the model's internal mechanisms, thereby eliminating the biases inherent in external reward models or human preferences. Beyond standard synthesis, ACE-Step v1.5 unifies precise stylistic control with versatile editing capabilities -- such as cover generation, repainting, and vocal-to-BGM conversion -- while maintaining strict adherence to prompts across 50+ languages. This paves the way for powerful tools that seamlessly integrate into the creative workflows of music artists, producers, and content creators. The code, the model weights and the demo are available at: https://ace-step.github.io/ace-step-v1.5.github.io/

The ISO 26262 standard from 2016 represents the state of the art for a safety-guided development of safety-critical electric/electronic vehicle systems. These vehicle systems include advanced driver assistance systems and vehicle guidance systems. The development process proposed in the ISO 26262 standard is based upon multiple V-models, and defines activities and work products for each process step. In many of these process steps, scenario based approaches can be applied to achieve the defined work products for the development of automated driving functions. To accomplish the work products of different process steps, scenarios have to focus on various aspects like a human understandable notation or a description via time-space variables. This leads to contradictory requirements regarding the level of detail and way of notation for the representation of scenarios. In this paper, the authors present requirements for the representation of scenarios in different process steps defined by the ISO 26262 standard, propose a consistent terminology based on prior publications for the identified levels of abstraction, and demonstrate how scenarios can be systematically evolved along the phases of the development process outlined in the ISO 26262 standard.

We develop the Itô calculus of Brownian motion, machine-checked in Lean~4 over Mathlib and the BrownianMotion package. On a bounded interval [0,T] the Itô integral is built as a Hilbert-space isometry, from a predictable-rectangle π-system through the density of simple adapted processes. Realized as a process, it is a continuous L^2 martingale. One structural identity drives this: the integral at time t is the conditional-expectation projection of its terminal value onto F_t, and from it adaptedness, the martingale property, the contraction bound, and both the terminal and time-indexed Itô isometries follow as corollaries. On this integral we prove Itô's formula for C^3 functions with bounded derivatives, including the time-dependent form df = f_x,dB + (f_t + tfrac12 f_{xx}),dt, by a discrete-to-continuous argument through weighted quadratic variation with explicit L^2 remainder bounds. We then pass from the L^2 theory to the pathwise. The integral process has an almost-surely continuous modification, and its everywhere-continuous representative is a local martingale for the null-augmented Brownian filtration; gluing the bounded-horizon representatives along the half-line yields the Itô integral as a continuous local martingale on all of R_{ge 0}, the form it takes in the classical theory. To our knowledge these are the first machine-checked constructions of the Itô integral and of Itô's formula in any proof assistant, and the first to reach a pathwise-continuous local martingale. The boundary is explicit. The L^2 integral and Itô's formula are developed on [0,T] with bounded-derivative integrands; the unrestricted C^2 formula, integrators beyond brownian motion, and right-continuity of the filtration lie outside the development.

A diffusion model, which is formulated to produce an image using thousands of denoising steps, usually suffers from a slow inference speed. Existing acceleration algorithms simplify the sampling by skipping most steps yet exhibit considerable performance degradation. By viewing the generation of diffusion models as a discretized integrating process, we argue that the quality drop is partly caused by applying an inaccurate integral direction to a timestep interval. To rectify this issue, we propose a timestep aligner that helps find a more accurate integral direction for a particular interval at the minimum cost. Specifically, at each denoising step, we replace the original parameterization by conditioning the network on a new timestep, which is obtained by aligning the sampling distribution to the real distribution. Extensive experiments show that our plug-in design can be trained efficiently and boost the inference performance of various state-of-the-art acceleration methods, especially when there are few denoising steps. For example, when using 10 denoising steps on the popular LSUN Bedroom dataset, we improve the FID of DDIM from 9.65 to 6.07, simply by adopting our method for a more appropriate set of timesteps. Code will be made publicly available.

When leveraging language models for reasoning tasks, generating explicit chain-of-thought (CoT) steps often proves essential for achieving high accuracy in final outputs. In this paper, we investigate if models can be taught to internalize these CoT steps. To this end, we propose a simple yet effective method for internalizing CoT steps: starting with a model trained for explicit CoT reasoning, we gradually remove the intermediate steps and finetune the model. This process allows the model to internalize the intermediate reasoning steps, thus simplifying the reasoning process while maintaining high performance. Our approach enables a GPT-2 Small model to solve 9-by-9 multiplication with up to 99% accuracy, whereas standard training cannot solve beyond 4-by-4 multiplication. Furthermore, our method proves effective on larger language models, such as Mistral 7B, achieving over 50% accuracy on GSM8K without producing any intermediate steps.

IntLevPy provides a comprehensive description of the IntLevPy Package, a Python library designed for simulating and analyzing intermittent and L\'evy processes. The package includes functionalities for process simulation, including full parameter estimation and fitting optimization for both families of processes, moment calculation, and classification methods. The classification methodology utilizes adjusted-R^2 and a noble performance measure {\Gamma}, enabling the distinction between intermittent and L\'evy processes. IntLevPy integrates iterative parameter optimization with simulation-based validation. This paper provides an in-depth user guide covering IntLevPy software architecture, installation, validation workflows, and usage examples. In this way, IntLevPy facilitates systematic exploration of these two broad classes of stochastic processes, bridging theoretical models and practical applications.

Diffusion models are emerging expressive generative models, in which a large number of time steps (inference steps) are required for a single image generation. To accelerate such tedious process, reducing steps uniformly is considered as an undisputed principle of diffusion models. We consider that such a uniform assumption is not the optimal solution in practice; i.e., we can find different optimal time steps for different models. Therefore, we propose to search the optimal time steps sequence and compressed model architecture in a unified framework to achieve effective image generation for diffusion models without any further training. Specifically, we first design a unified search space that consists of all possible time steps and various architectures. Then, a two stage evolutionary algorithm is introduced to find the optimal solution in the designed search space. To further accelerate the search process, we employ FID score between generated and real samples to estimate the performance of the sampled examples. As a result, the proposed method is (i).training-free, obtaining the optimal time steps and model architecture without any training process; (ii). orthogonal to most advanced diffusion samplers and can be integrated to gain better sample quality. (iii). generalized, where the searched time steps and architectures can be directly applied on different diffusion models with the same guidance scale. Experimental results show that our method achieves excellent performance by using only a few time steps, e.g. 17.86 FID score on ImageNet 64 times 64 with only four steps, compared to 138.66 with DDIM. The code is available at https://github.com/lilijiangg/AutoDiffusion.

We introduce ACE-Step, a novel open-source foundation model for music generation that overcomes key limitations of existing approaches and achieves state-of-the-art performance through a holistic architectural design. Current methods face inherent trade-offs between generation speed, musical coherence, and controllability. For example, LLM-based models (e.g. Yue, SongGen) excel at lyric alignment but suffer from slow inference and structural artifacts. Diffusion models (e.g. DiffRhythm), on the other hand, enable faster synthesis but often lack long-range structural coherence. ACE-Step bridges this gap by integrating diffusion-based generation with Sana's Deep Compression AutoEncoder (DCAE) and a lightweight linear transformer. It also leverages MERT and m-hubert to align semantic representations (REPA) during training, allowing rapid convergence. As a result, our model synthesizes up to 4 minutes of music in just 20 seconds on an A100 GPU-15x faster than LLM-based baselines-while achieving superior musical coherence and lyric alignment across melody, harmony, and rhythm metrics. Moreover, ACE-Step preserves fine-grained acoustic details, enabling advanced control mechanisms such as voice cloning, lyric editing, remixing, and track generation (e.g. lyric2vocal, singing2accompaniment). Rather than building yet another end-to-end text-to-music pipeline, our vision is to establish a foundation model for music AI: a fast, general-purpose, efficient yet flexible architecture that makes it easy to train subtasks on top of it. This paves the way for the development of powerful tools that seamlessly integrate into the creative workflows of music artists, producers, and content creators. In short, our goal is to build a stable diffusion moment for music. The code, the model weights and the demo are available at: https://ace-step.github.io/.

By merging models, AI systems can combine the distinct strengths of separate language models, achieving a balance between multiple capabilities without requiring substantial retraining. However, the integration process can be intricate due to differences in training methods and fine-tuning, typically necessitating specialized knowledge and repeated refinement. This paper explores model merging techniques across a spectrum of complexity, examining where automated methods like evolutionary strategies stand compared to hyperparameter-driven approaches such as DARE, TIES-Merging and simpler methods like Model Soups. In addition, we introduce Differentiable Adaptive Merging (DAM), an efficient, adaptive merging approach as an alternative to evolutionary merging that optimizes model integration through scaling coefficients, minimizing computational demands. Our findings reveal that even simple averaging methods, like Model Soups, perform competitively when model similarity is high, underscoring each technique's unique strengths and limitations. We open-sourced DAM, including the implementation code and experiment pipeline, on GitHub: https://github.com/arcee-ai/DAM.

We advocate a strategy of bootstrapping Feynman integrals from just knowledge of their singular behavior. This approach is complementary to other bootstrap programs, which exploit non-perturbative constraints such as unitarity, or amplitude-level constraints such as gauge invariance. We begin by studying where a Feynman integral can become singular, and the behavior it exhibits near these singularities. We then characterize the space of functions that we expect the integral to evaluate to, in order to formulate an appropriate ansatz. Finally, we derive constraints on where each singularity can appear in this ansatz, and use information about the expansion of the integral around singular points in order to determine the value of all remaining free coefficients. Throughout, we highlight how constraints that have previously only been derived for integrals with generic masses can be extended to integrals involving particles of equal or vanishing mass. We illustrate the effectiveness of this approach by bootstrapping a number of examples, including the four-point double box with a massive internal loop.

We consider the anti-symmetrization of the half-shuffle on words, which we call the 'area' operator, since it corresponds to taking the signed area of elements of the iterated-integral signature. The tensor algebra is a so-called Tortkara algebra under this operator. We show that the iterated application of the area operator is sufficient to recover the iterated-integral signature of a path. Just as the "information" the second level adds to the first one is known to be equivalent to the area between components of the path, this means that all the information added by subsequent levels is equivalent to iterated areas. On the way to this main result, we characterize (homogeneous) generating sets of the shuffle algebra. We finally discuss compatibility between the area operator and discrete integration and stochastic integration and conclude with some results on the linear span of the areas of areas.

The numerical solution of implicit and stiff differential equations by implicit numerical integrators has been largely investigated and there exist many excellent efficient codes available in the scientific community, as Radau5 (based on a Runge-Kutta collocation method at Radau points) and Dassl, based on backward differentiation formulas, among the others. When solving fractional ordinary differential equations (ODEs), the derivative operator is replaced by a non-local one and the fractional ODE is reformulated as a Volterra integral equation, to which these codes cannot be directly applied. This article is a follow-up of the article by the authors (Guglielmi and Hairer, SISC, 2025) for differential equations with distributed delays. The main idea is to approximate the fractional kernel t^{α-1}/ Γ(α) (α>0) by a sum of exponential functions or by a sum of exponential functions multiplied by a monomial, and then to transform the fractional integral (of convolution type) into a set of ordinary differential equations. The augmented system is typically stiff and thus requires the use of an implicit method. It can have a very large dimension and requires a special treatment of the arising linear systems. The present work presents an algorithm for the construction of an approximation of the fractional kernel by a sum of exponential functions, and it shows how the arising linear systems in a stiff time integrator can be solved efficiently. It is explained how the code Radau5 can be used for solving fractional differential equations. Numerical experiments illustrate the accuracy and the efficiency of the proposed method. Driver examples are publicly available from the homepages of the authors.

E-commerce risk management requires aggregating diverse, deeply embedded web data through multi-step, stateful interactions, which traditional scraping methods and most existing Graphical User Interface (GUI) agents cannot handle. These agents are typically limited to single-step tasks and lack the ability to manage dynamic, interactive content critical for effective risk assessment. To address this challenge, we introduce RISK, a novel framework designed to build and deploy GUI agents for this domain. RISK integrates three components: (1) RISK-Data, a dataset of 8,492 single-step and 2,386 multi-step interaction trajectories, collected through a high-fidelity browser framework and a meticulous data curation process; (2) RISK-Bench, a benchmark with 802 single-step and 320 multi-step trajectories across three difficulty levels for standardized evaluation; and (3) RISK-R1, a R1-style reinforcement fine-tuning framework considering four aspects: (i) Output Format Constraint, (ii) Single-step and (iii) Multi-step Level Reward, and (iv) Task Level Reweight. Experiments show that RISK-R1 achieves a 6.8% improvement in offline single-step and an 8.8% improvement in offline multi-step, using only 7.2% of the parameters of the SOTA baseline. Moreover, it attains a top task success rate of 70.5% in online evaluation. RISK provides a scalable, domain-specific solution for automating complex web interactions in e-commerce risk management. The code is available at https://github.com/RenqiChen/RISK-GUI.

In order to exploit the full potential of the LHC and future colliders, high-precision calculations of a very wide range of observables are crucial. Automated tools for next-to-next-to-leading order calculations of perturbative scattering amplitudes are therefore a highly desirable goal. So far, we have developed several major ingredients of such a tool in the OpenLoops framework. In our approach we split the calculation of scattering amplitudes into three components: loop momentum tensor integrals, the corresponding process-dependent tensor coefficients, and the interplay of (D-4)-dimensional parts of the integrand with divergences of the integrals. In these proceedings, we present a new recursive algorithm to reduce arbitrary two-loop tensor integrals to scalar integrals, which has been implemented into an efficient numerical tool. We also implemented a first version of the subsequent reduction to master integrals, which allows for a full validation of the algorithm. We present a first successful validation computation and discuss its dependence on the precision of the externally computed master integrals.

The interdiffusion coefficients are estimated either following the Wagner's method expressed with respect to the composition (mol or atomic fraction) normalized variable after considering the molar volume variation or the den Broeder's method expressed with respect to the concentration (composition divided by the molar volume) normalized variable. On the other hand, the relations for estimation of the intrinsic diffusion coefficients of components as established by van Loo and integrated diffusion coefficients in a phase with narrow homogeneity range as established by Wagner are currently available with respect to the composition normalized variable only. In this study, we have first derived the relation proposed by den Broeder following the line of treatment proposed by Wagner. Further, the relations for estimation of the intrinsic diffusion coefficients of the components and integrated interdiffusion coefficient are established with respect to the concentration normalized variable, which were not available earlier. The veracity of these methods is examined based on the estimation of data in Ni-Pd, Ni-Al and Cu-Sn systems. Our analysis indicates that both the approaches are logically correct and there is small difference in the estimated data in these systems although a higher difference could be found in other systems. The integrated interdiffusion coefficients with respect to the concentration (or concentration normalized variable) can only be estimated considering the ideal molar volume variation. This might be drawback in certain practical systems.

Background. The rapid and growing popularity of machine learning (ML) applications has led to an increasing interest in MLOps, that is, the practice of continuous integration and deployment (CI/CD) of ML-enabled systems. Aims. Since changes may affect not only the code but also the ML model parameters and the data themselves, the automation of traditional CI/CD needs to be extended to manage model retraining in production. Method. In this paper, we present an initial investigation of the MLOps practices implemented in a set of ML-enabled systems retrieved from GitHub, focusing on GitHub Actions and CML, two solutions to automate the development workflow. Results. Our preliminary results suggest that the adoption of MLOps workflows in open-source GitHub projects is currently rather limited. Conclusions. Issues are also identified, which can guide future research work.

Mathematical reasoning represents a critical frontier in advancing large language models (LLMs). While step-by-step approaches have emerged as the dominant paradigm for mathematical problem-solving in LLMs, the quality of reasoning steps in training data fundamentally constrains the performance of the models. Recent studies has demonstrated that more detailed intermediate steps can enhance model performance, yet existing methods for step expansion either require more powerful external models or incur substantial computational costs. In this paper, we introduce MathFimer, a novel framework for mathematical reasoning step expansion inspired by the "Fill-in-the-middle" task from code completion. By decomposing solution chains into prefix-suffix pairs and training models to reconstruct missing intermediate steps, we develop a specialized model, MathFimer-7B, on our carefully curated NuminaMath-FIM dataset. We then apply these models to enhance existing mathematical reasoning datasets by inserting detailed intermediate steps into their solution chains, creating MathFimer-expanded versions. Through comprehensive experiments on multiple mathematical reasoning datasets, including MathInstruct, MetaMathQA and etc., we demonstrate that models trained on MathFimer-expanded data consistently outperform their counterparts trained on original data across various benchmarks such as GSM8K and MATH. Our approach offers a practical, scalable solution for enhancing mathematical reasoning capabilities in LLMs without relying on powerful external models or expensive inference procedures.

Stochastic gradient descent method and its variants constitute the core optimization algorithms that achieve good convergence rates for solving machine learning problems. These rates are obtained especially when these algorithms are fine-tuned for the application at hand. Although this tuning process can require large computational costs, recent work has shown that these costs can be reduced by line search methods that iteratively adjust the stepsize. We propose an alternative approach to stochastic line search by using a new algorithm based on forward step model building. This model building step incorporates second-order information that allows adjusting not only the stepsize but also the search direction. Noting that deep learning model parameters come in groups (layers of tensors), our method builds its model and calculates a new step for each parameter group. This novel diagonalization approach makes the selected step lengths adaptive. We provide convergence rate analysis, and experimentally show that the proposed algorithm achieves faster convergence and better generalization in well-known test problems. More precisely, SMB requires less tuning, and shows comparable performance to other adaptive methods.