Daily Papers

The massive overactuation in the human musculoskeletal system makes it challenging to train musculoskeletal models to generate human-like motion via reinforcement learning, primarily because exploration in the resulting high-dimensional and redundant action space is extremely inefficient. To address this problem, we propose the λ-hold controller, inspired by the equilibrium-point (EP) hypothesis, which has been widely supported by extensive evidence from human motor control studies. The policy's control variable is the per-muscle EP threshold length λ, from which a stretch-reflex recruitment law computes the muscle excitations automatically. Holding each λ over an interval of the gait phase also sharply reduces the frequency at which the policy must be queried. Consequently, the controller, to our knowledge for the first time, enables a muscle-actuated skeletal model to learn human-like sprinting using only a minimal reward within an hour of training. The efficient exploration through the proposed λ-hold controller is not merely an engineering trick but an approach grounded in physiology, bringing together the EP hypothesis, intermittent control, and optimal feedback control. Beyond encapsulating human-like behavior in predictive simulation, this achievement contributes to developing a learnable model of the human motor controller.

Reinforcement learning (RL) is a powerful framework for optimizing decision-making in complex systems under uncertainty, an essential challenge in real-world settings, particularly in the context of the energy transition. A representative example is remote microgrids that supply power to communities disconnected from the main grid. Enabling the energy transition in such systems requires coordinated control of renewable sources like wind turbines, alongside fuel generators and batteries, to meet demand while minimizing fuel consumption and battery degradation under exogenous and intermittent load and wind conditions. These systems must often conform to extensive regulations and complex operational constraints. To ensure that RL agents respect these constraints, it is crucial to provide interpretable guarantees. In this paper, we introduce Shielded Controller Units (SCUs), a systematic and interpretable approach that leverages prior knowledge of system dynamics to ensure constraint satisfaction. Our shield synthesis methodology, designed for real-world deployment, decomposes the environment into a hierarchical structure where each SCU explicitly manages a subset of constraints. We demonstrate the effectiveness of SCUs on a remote microgrid optimization task with strict operational requirements. The RL agent, equipped with SCUs, achieves a 24% reduction in fuel consumption without increasing battery degradation, outperforming other baselines while satisfying all constraints. We hope SCUs contribute to the safe application of RL to the many decision-making challenges linked to the energy transition.

This study focuses on operational control strategies for a multi-energy District Heating Network (DHN). Two control strategies are investigated and compared: (i) a reactive rule-based control (RBC) and (ii) a model predictive control (MPC). For the purpose of the study a small scale district heating network is modelled using Modelica. The production plant combines a heat pump, a gas boiler and a thermal solar field on the production side with a storage tank for flexibility purposes. On the consumption side, the virtual buildings are aggregated into a single consumer. We use our co-simulation and control platform, called Pegase, to implement the studied strategies. For both strategies the goal is to meet the consumers' demand while satisfying technical constraints. In addition MPC has the objective to minimize the operational costs, taking into account variable electricity prices and availability of solar thermal resource. Different scenarios are also defined and compared to study the effect of the heat plant sizing and forecasting error. The operational cost is reduced when switching from RBC to a MPC. As can be expected, MPC is more efficient when dealing with variable energy costs, intermittent solar energy and storage capabilities. This study also demonstrates how our tools enable an easy coupling of Modelica-based simulation with various control strategies. It especially supports the implementation and validation of complex MPC strategies in an efficient way, and yearly simulations are performed within 20 minutes.

Intermittent Androgen Suppression (IAS) is a treatment strategy for delaying or even preventing time to relapse of advanced prostate cancer. IAS consists of alternating cycles of therapy (in the form of androgen suppression) and off-treatment periods. The level of prostate specific antigen (PSA) in a patient's serum is frequently monitored to determine when the patient will be taken off therapy and when therapy will resume. In spite of extensive recent clinical experience with IAS, the design of an ideal protocol for any given patient remains one of the main challenges associated with effectively implementing this therapy. We use a threshold-based policy for optimal IAS therapy design that is parameterized by lower and upper PSA threshold values and is associated with a cost metric that combines clinically relevant measures of therapy success. We apply Infinitesimal Perturbation Analysis (IPA) to a Stochastic Hybrid Automaton (SHA) model of prostate cancer evolution under IAS and derive unbiased estimators of the cost metric gradient with respect to various model and therapy parameters. These estimators are subsequently used for system analysis. By evaluating sensitivity estimates with respect to several model parameters, we identify critical parameters and demonstrate that relaxing the optimality condition in favor of increased robustness to modeling errors provides an alternative objective to therapy design for at least some patients.

Predicting the dynamics of interacting objects is essential for both humans and intelligent systems. However, existing approaches are limited to simplified, toy settings and lack generalizability to complex, real-world environments. Recent advances in generative models have enabled the prediction of state transitions based on interventions, but focus on generating a single future state which neglects the continuous dynamics resulting from the interaction. To address this gap, we propose InterDyn, a novel framework that generates videos of interactive dynamics given an initial frame and a control signal encoding the motion of a driving object or actor. Our key insight is that large video generation models can act as both neural renderers and implicit physics ``simulators'', having learned interactive dynamics from large-scale video data. To effectively harness this capability, we introduce an interactive control mechanism that conditions the video generation process on the motion of the driving entity. Qualitative results demonstrate that InterDyn generates plausible, temporally consistent videos of complex object interactions while generalizing to unseen objects. Quantitative evaluations show that InterDyn outperforms baselines that focus on static state transitions. This work highlights the potential of leveraging video generative models as implicit physics engines. Project page: https://interdyn.is.tue.mpg.de/

IntLevPy provides a comprehensive description of the IntLevPy Package, a Python library designed for simulating and analyzing intermittent and L\'evy processes. The package includes functionalities for process simulation, including full parameter estimation and fitting optimization for both families of processes, moment calculation, and classification methods. The classification methodology utilizes adjusted-R^2 and a noble performance measure {\Gamma}, enabling the distinction between intermittent and L\'evy processes. IntLevPy integrates iterative parameter optimization with simulation-based validation. This paper provides an in-depth user guide covering IntLevPy software architecture, installation, validation workflows, and usage examples. In this way, IntLevPy facilitates systematic exploration of these two broad classes of stochastic processes, bridging theoretical models and practical applications.

One of the main challenges developers face in the use of continuous integration (CI) and deployment pipelines is the occurrence of intermittent job failures, which result from unexpected non-deterministic issues (e.g., flaky tests or infrastructure problems) rather than regular code-related errors such as bugs. Prior studies developed machine learning (ML) models trained on large datasets of job logs to classify job failures as either intermittent or regular. As an alternative to costly manual labeling of large datasets, the state-of-the-art (SOTA) approach leveraged a heuristic based on non-deterministic job reruns. However, this method mislabels intermittent job failures as regular in contexts where rerunning suspicious job failures is not an explicit policy, and therefore limits the SOTA's performance in practice. In fact, our manual analysis of 2,125 job failures from 5 industrial and 1 open-source projects reveals that, on average, 32% of intermittent job failures are mislabeled as regular. To address these limitations, this paper introduces a novel approach to intermittent job failure detection using few-shot learning (FSL). Specifically, we fine-tune a small language model using a few number of manually labeled log examples to generate rich embeddings, which are then used to train an ML classifier. Our FSL-based approach achieves 70-88% F1-score with only 12 shots in all projects, outperforming the SOTA, which proved ineffective (34-52% F1-score) in 4 projects. Overall, this study underlines the importance of data quality over quantity and provides a more efficient and practical framework for the detection of intermittent job failures in organizations.

We introduce anticipation: a method for constructing a controllable generative model of a temporal point process (the event process) conditioned asynchronously on realizations of a second, correlated process (the control process). We achieve this by interleaving sequences of events and controls, such that controls appear following stopping times in the event sequence. This work is motivated by problems arising in the control of symbolic music generation. We focus on infilling control tasks, whereby the controls are a subset of the events themselves, and conditional generation completes a sequence of events given the fixed control events. We train anticipatory infilling models using the large and diverse Lakh MIDI music dataset. These models match the performance of autoregressive models for prompted music generation, with the additional capability to perform infilling control tasks, including accompaniment. Human evaluators report that an anticipatory model produces accompaniments with similar musicality to even music composed by humans over a 20-second clip.

Differentiable matching layers and residual connection paradigms, often implemented via entropy-regularized Optimal Transport (OT), serve as critical mechanisms in structural prediction and architectural scaling. However, recovering discrete permutations or maintaining identity mappings via annealing εto 0 is notoriously unstable. In this work, we identify a fundamental mechanism for this failure: Premature Mode Collapse. By analyzing the non-normal dynamics of the Sinkhorn fixed-point map, we reveal a theoretical thermodynamic speed limit: standard exponential cooling outpaces the contraction rate of the inference operator, which degrades as O(1/ε). To address this, we propose Efficient Piecewise Hybrid Adaptive Stability Control (EPH-ASC), an adaptive scheduling algorithm that monitors the stability of the inference process. We demonstrate that EPH-ASC is essential for stabilizing Manifold-Constrained Hyper-Connections (mHC) during large-scale training on the FineWeb-Edu dataset, effectively preventing late-stage gradient explosions by enforcing a linear stability law.

Interactive video world models need to generate each video chunk efficiently while responding faithfully to user controls. Many systems use chunk-wise autoregressive generation with few-step denoising, but each chunk still requires several costly denoising iterations. Training-free caching can reduce this cost, yet existing policies make reuse decisions primarily from model-internal denoising dynamics and do not explicitly account for control transitions. Actually, interactive generation explicitly exposes a signal they do not use: the controls for a chunk arrive before it is denoised, so a schedule derived from them costs no forward pass. To this end, we analyze adjacent chunks under different control regimes and find that structural similarity drops around action changes, while low-frequency structure remains more persistent than high-frequency detail. Motivated by these observations, we propose CtrlCache, a training-free control-aware caching framework that adapts computation to the current control sequence. Specifically, the action-aware scheduling and refresh policy detects action changes across and within chunks, and labels each chunk as initial, transition, turning, or steady state. At one selected interior denoising step, initial and transition chunks retain full computation, while turning and steady chunks reuse the transformer residual from the most recent fully computed step in the same chunk. To exploit the persistence of low-frequency structure during steady interaction, we further introduce a frequency-mixed history prior guidance that incorporates complementary information from the preceding clean latent without an additional DiT forward pass. Evaluated on Matrix-Game 2.0 and LingBot-World v1/v2, CtrlCache achieves 1.21x to 1.41x DiT-backbone speedups without model retraining while improving WBench Overall scores over original inference across all three models.

Video generation technologies are developing rapidly and have broad potential applications. Among these technologies, camera control is crucial for generating professional-quality videos that accurately meet user expectations. However, existing camera control methods still suffer from several limitations, including control precision and the neglect of the control for subject motion dynamics. In this work, we propose I2VControl-Camera, a novel camera control method that significantly enhances controllability while providing adjustability over the strength of subject motion. To improve control precision, we employ point trajectory in the camera coordinate system instead of only extrinsic matrix information as our control signal. To accurately control and adjust the strength of subject motion, we explicitly model the higher-order components of the video trajectory expansion, not merely the linear terms, and design an operator that effectively represents the motion strength. We use an adapter architecture that is independent of the base model structure. Experiments on static and dynamic scenes show that our framework outperformances previous methods both quantitatively and qualitatively. The project page is: https://wanquanf.github.io/I2VControlCamera .

Interactive control for video generation is moving from coarse prompts toward fine-grained, physically meaningful manipulation of dynamic scenes. Yet existing controllable methods either require the full control schedule before generation starts, or use pixel-space signals that dictate object positions rather than physical dynamics. To address these limitations, we propose PhysStream, an autoregressive model for physics-grounded image-to-video synthesis that incorporates structured scene memory---positional maps and object tracking maps derived online from previously generated frames---and supports fine-grained motion control via sparse velocity-increment signals that encode physical quantities, letting the model learn the underlying dynamics. We train our model in two stages: a bidirectional model is first finetuned with motion-control conditioning, then a causal autoregressive model is trained with additional structured scene memory, further improving physical consistency. PhysStream enables interactive, mid-generation control over multi-object tabletop rigid-body scenes---a capability not supported by prior methods---reducing motion distribution distance (FVMD) by 33% and trajectory error by 12% over the strongest baselines on synthetic benchmarks, and is preferred by human evaluators in over 85% of in-the-wild comparisons. Please check our website for more details: https://czzzzh.github.io/PhysStream

Neuromuscular electrical stimulation (NMES) has been effectively applied in many rehabilitation treatments of individuals with spinal cord injury (SCI). In this context, we introduce a novel, robust, and intelligent control-based methodology to closed-loop NMES systems. Our approach utilizes a robust control law to guarantee system stability and machine learning tools to optimize both the controller parameters and system identification. Regarding the latter, we introduce the use of past rehabilitation data to build more realistic data-driven identified models. Furthermore, we apply the proposed methodology for the rehabilitation of lower limbs using a control technique named the robust integral of the sign of the error (RISE), an offline improved genetic algorithm optimizer, and neural network models. Although in the literature, the RISE controller presented good results on healthy subjects, without any fine-tuning method, a trial and error approach would quickly lead to muscle fatigue for individuals with SCI. In this paper, for the first time, the RISE controller is evaluated with two paraplegic subjects in one stimulation session and with seven healthy individuals in at least two and at most five sessions. The results showed that the proposed approach provided a better control performance than empirical tuning, which can avoid premature fatigue on NMES-based clinical procedures.

Video is a scalable observation of physical dynamics: it captures how objects move, how contact unfolds, and how scenes evolve under interaction -- all without requiring robot action labels. Yet translating this temporal structure into reliable robotic control remains an open challenge, because video lacks action supervision and differs from robot experience in embodiment, viewpoint, and physical constraints. This survey reviews methods that exploit non-action-annotated temporal video to learn control interfaces for robotic manipulation. We introduce an interface-centric taxonomy organized by where the video-to-control interface is constructed and what control properties it enables, identifying three families: direct video--action policies, which keep the interface implicit; latent-action methods, which route temporal structure through a compact learned intermediate; and explicit visual interfaces, which predict interpretable targets for downstream control. For each family, we analyze control-integration properties -- how the loop is closed, what can be verified before execution, and where failures enter. A cross-family synthesis reveals that the most pressing open challenges center on the robotics integration layer -- the mechanisms that connect video-derived predictions to dependable robot behavior -- and we outline research directions toward closing this gap.

Delayed outcomes are ubiquitous in online experimentation: treatment can affect whether an outcome occurs, when it occurs, and its realized value. To accommodate staggered entry while remaining robust to environmental nonstationarity and unit-level heterogeneity, we adopt a design-based perspective and target the sample cumulative reward in each arm as a function of calendar time. Our confidence sequences allow practitioners to continuously monitor the counterfactual incremental reward, such as revenue, that would have been realized by calendar time t had all entered units been assigned to treatment rather than control. The main technical challenge is the choice of design-based filtration, complicated by the presence of asynchronous potential outcome times. We show that the IPW treatment-effect estimation error is not a martingale with respect to any filtration, while each arm-specific IPW estimation error is a martingale with respect to a carefully chosen arm-specific event-time filtration. We therefore construct a confidence sequence for the treatment effect by combining two arm-level confidence sequences with a union bound, and further demonstrate that this can outperform the traditional design-based variance upper bound. Finally, we characterize the class of augmentations for which the per-arm AIPW estimation error remains a martingale.

To stabilize the periodic operation of a chemical reactor the oscillation period should be determined precisely in real time. The method discussed in the paper is based on adaptive sampling of the state variable with the use of chaotic mapping to itself. It enables precise determination of the oscillation period in real time and could be used for a proper control system, that can successfully control the process and maintain the oscillation period at a set level. The method was applied to a tank reactor and tubular reactor with recycle.

A central puzzle for the behavioural sciences and for human-facing artificial intelligence is the persistence of within-person variability. The same individual, presented with the same observable input, produces different outcomes on different occasions, and different individuals produce divergent outcomes that no observable covariate fully predicts. We argue that this variability belongs in the dynamic latent state of the person, and that human outcomes are controllable in a precise and operational sense through interventions that target the state and its weighting at the moment a decision is being formed. We define a state as the time-indexed weighting vector over the dimensions that govern how an individual's biology, physiology, and neuropsychology process the next event into a decision and an outcome. The relationship between state, decision, and outcome is causal rather than correlational. The weighting vector is dynamic at sub-daily timescales. The conscious channel through which outcomes are reportable is a narrow attentional bottleneck whose contents are themselves state-dependent. Taken together, these claims imply that the outcome of a given event is controllable, conditionally, on the state-trajectory at the time of intervention. We motivate the framework with six strands of established evidence (causal inference, predictive processing, allostasis, attentional bottleneck, chronobiology, computational psychiatry) and a 24-month observational base from a deployed behavioural platform spanning more than 200,000 consented users across four occupational personas (research period 2023 to 2026). We derive seven testable predictions, list six operational requirements for state-aware systems, and discuss implications for digital health, education, AI personalisation, and personal agency.

Precise glucose level monitoring is critical for people with diabetes to avoid serious complications. While there are several methods for continuous glucose level monitoring, research on maintenance devices is limited. To mitigate the gap, we provide a novel neural control system for continuous glucose monitoring and management that uses differential predictive control. Our approach, led by a sophisticated neural policy and differentiable modeling, constantly adjusts insulin supply in real-time, thereby improving glucose level optimization in the body. This end-to-end method maximizes efficiency, providing personalized care and improved health outcomes, as confirmed by empirical evidence.

In recent years, Artificial Neural Networks (ANN) have become a standard in robotic control. However, a significant drawback of large-scale ANNs is their increased power consumption. This becomes a critical concern when designing autonomous aerial vehicles, given the stringent constraints on power and weight. Especially in the case of blimps, known for their extended endurance, power-efficient control methods are essential. Spiking neural networks (SNN) can provide a solution, facilitating energy-efficient and asynchronous event-driven processing. In this paper, we have evolved SNNs for accurate altitude control of a non-neutrally buoyant indoor blimp, relying solely on onboard sensing and processing power. The blimp's altitude tracking performance significantly improved compared to prior research, showing reduced oscillations and a minimal steady-state error. The parameters of the SNNs were optimized via an evolutionary algorithm, using a Proportional-Derivative-Integral (PID) controller as the target signal. We developed two complementary SNN controllers while examining various hidden layer structures. The first controller responds swiftly to control errors, mitigating overshooting and oscillations, while the second minimizes steady-state errors due to non-neutral buoyancy-induced drift. Despite the blimp's drivetrain limitations, our SNN controllers ensured stable altitude control, employing only 160 spiking neurons.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

Electric motors are used in many applications and their efficiency is strongly dependent on their control. Among others, PI approaches or model predictive control methods are well-known in the scientific literature and industrial practice. A novel approach is to use reinforcement learning (RL) to have an agent learn electric drive control from scratch merely by interacting with a suitable control environment. RL achieved remarkable results with super-human performance in many games (e.g. Atari classics or Go) and also becomes more popular in control tasks like cartpole or swinging pendulum benchmarks. In this work, the open-source Python package gym-electric-motor (GEM) is developed for ease of training of RL-agents for electric motor control. Furthermore, this package can be used to compare the trained agents with other state-of-the-art control approaches. It is based on the OpenAI Gym framework that provides a widely used interface for the evaluation of RL-agents. The initial package version covers different DC motor variants and the prevalent permanent magnet synchronous motor as well as different power electronic converters and a mechanical load model. Due to the modular setup of the proposed toolbox, additional motor, load, and power electronic devices can be easily extended in the future. Furthermore, different secondary effects like controller interlocking time or noise are considered. An intelligent controller example based on the deep deterministic policy gradient algorithm which controls a series DC motor is presented and compared to a cascaded PI-controller as a baseline for future research. Fellow researchers are encouraged to use the framework in their RL investigations or to contribute to the functional scope (e.g. further motor types) of the package.

Achieving precise, versatile whole-body character control in physics-based animation remains challenging. Recent diffusion-based policies generate rich and expressive motions but typically rely on gradient-based test-time guidance to satisfy task objectives, which is slow and can reduce robustness. We introduce NaP-Control (Navigating Diffusion Prior for Versatile and Fast Character Control), abbreviated as NaP. Our method uses reinforcement learning to manipulate the latent noise of a task-agnostic diffusion policy prior, steering it toward task-specific behaviors for fast, robust control with high motion fidelity. In contrast to methods that rely solely on offline training, NaP interacts with the environment during training to correct motions and optimize task rewards, improving success rates and enabling adaptation to challenging scenarios. By directly predicting task-optimized diffusion noise, NaP eliminates iterative guidance during denoising and enables efficient inference. Experiments show that NaP attains higher success rates and faster inference while preserving natural motion across diverse tasks.

We consider offline reinforcement learning (RL) methods in possibly nonstationary environments. Many existing RL algorithms in the literature rely on the stationarity assumption that requires the system transition and the reward function to be constant over time. However, the stationarity assumption is restrictive in practice and is likely to be violated in a number of applications, including traffic signal control, robotics and mobile health. In this paper, we develop a consistent procedure to test the nonstationarity of the optimal Q-function based on pre-collected historical data, without additional online data collection. Based on the proposed test, we further develop a sequential change point detection method that can be naturally coupled with existing state-of-the-art RL methods for policy optimization in nonstationary environments. The usefulness of our method is illustrated by theoretical results, simulation studies, and a real data example from the 2018 Intern Health Study. A Python implementation of the proposed procedure is available at https://github.com/limengbinggz/CUSUM-RL.

We use a Stochastic Hybrid Automaton (SHA) model of prostate cancer evolution under intermittent androgen suppression (IAS) to study a threshold-based policy for therapy design. IAS is currently one of the most widely used treatments for advanced prostate cancer. Patients undergoing IAS are submitted to cycles of treatment (in the form of androgen deprivation) and off-treatment periods in an alternating manner. One of the main challenges in IAS is to optimally design a therapy scheme, i.e., to determine when to discontinue and recommence androgen suppression. The level of prostate specific antigen (PSA) in a patient's serum is frequently monitored to determine when the patient will be taken off therapy and when therapy will resume. The threshold-based policy we propose is parameterized by lower and upper PSA threshold values and is associated with a cost metric that combines clinically relevant measures of therapy success. Using Infinitesimal Perturbation Analysis (IPA), we derive unbiased gradient estimators of this cost metric with respect to the controllable PSA threshold values based on actual data and show how these estimators can be used to adaptively adjust controllable parameters so as to improve therapy outcomes based on the cost metric defined.

Connected and automated vehicles demand lateral controllers that are simultaneously accurate, low-effort, and safe under model error and sensor noise. Modular controllers such as model predictive control (MPC) are interpretable and constraint-aware but rely on accurate models and hand-tuned weights. End-to-end learned policies, in particular continuous-action deep reinforcement learning, are adaptable and require no hand-designed control law, but offer no intrinsic safety guarantees and limited interpretability. This paper presents a hybrid architecture that combines an end-to-end Soft Actor-Critic (SAC) policy with a constrained linear MPC into a single steering command, using the MPC's first-step optimum as the model-based anchor and a single monotone blending coefficient that interpolates between the two paradigms. The architecture is evaluated on a linearized lateral bicycle model against a PID baseline, a tuned linear MPC, and a stand-alone SAC policy, across nominal, single-axis robustness, and multi-initial-condition ensemble experiments. The hybrid retains the tracking quality of stand-alone SAC while remaining inside the MPC's actuator envelope and preserving a deterministic, model-based contribution to every steering command. The architecture provides an actuator-envelope guarantee by construction but does not establish recursive feasibility or terminal invariance, and the closed-form blend does not prevent all corner-case divergences at the boundary of the training distribution. A corner-case analysis shows that the blend attenuates but cannot prevent failure under distribution shift, motivating a connectivity-aware extension in which the blending coefficient is scheduled by vehicle-to-everything (V2X) signals to restore model-based authority. Limitations and a path toward a constrained-QP predictive safety filter are discussed.

Interactive world models require responding in real time to versatile controls and maintaining long-horizon consistency. However, modeling heterogeneous controls remains difficult, while explosive contexts and unstable distillation impede achieving both long-horizon consistency and real-time responsiveness. In this paper, we present WorldPlay2, an interactive world model that couples a factorized hybrid control interface with a co-design of compressed memory and stable distillation. 1) Our factorized hybrid control interface integrates frame-aligned action control with structured semantic control that explicitly disentangles scene appearance, character identity, and dynamic semantic events, thereby facilitating effective control learning. 2) To achieve efficient long-horizon modeling, we compress historical contexts into compact memory tokens shared by the autoregressive student and the bidirectional teacher. This design enables clip-wise, memory-conditioned score evaluation instead of jointly processing an entire long rollout, substantially reducing distillation overhead. 3) We further propose Stable Forcing, which initializes the autoregressive student via a few-step strategy and leverages full-rollout replay to preserve the quality of long-horizon rollouts, ensuring robust and stable distillation. Extensive experiments demonstrate the strong generalizability of our model and its superior performance compared to existing methods.

Real-time interaction models -- Moshi, MiniCPM-o, Qwen-Omni -- turn serving into a periodic real-time task: on every frame a session ingests streaming audio and must respond by a recurring wall-clock deadline, while its KV cache grows monotonically and stays pinned for the whole conversation. This regime hides a dangerous failure mode. On a real full-duplex stack, sustained load does not degrade serving gracefully: it falls off a cliff, jumping in one step from milliseconds per frame to a stalled engine when accumulated session state exhausts the KV pool. The collapse is metastable -- identical five-minute runs collapse or survive on run-to-run variance -- and silent: latency and deadline-miss metrics read healthy throughout. We show one move restores both stability and observability: bound each session's resident state, and latency starts telling the truth. Metronome's in-engine KV window eliminates the collapse (0/20 vs. 14/20 runs across two batches) and turns per-frame latency into a monotone load signal, on which an online admission controller discovers the schedulable concurrency; without the window, the identical controller over-admits into the wall. A first-order model predicts the collapse time within a few percent on the headline model, and a quality probe validates the bound's design by ablation: the window alone is quality-free in turn-based decoding, and its few pinned attention-sink tokens are what keep free-running generation healthy. Everything is measured end-to-end on real audio, across four interaction models on one GPU.

In policy gradient reinforcement learning, access to a differentiable model enables 1st-order gradient estimation that accelerates learning compared to relying solely on derivative-free 0th-order estimators. However, discontinuous dynamics cause bias and undermine the effectiveness of 1st-order estimators. Prior work addressed this bias by constructing a confidence interval around the REINFORCE 0th-order gradient estimator and using these bounds to detect discontinuities. However, the REINFORCE estimator is notoriously noisy, and we find that this method requires task-specific hyperparameter tuning and has low sample efficiency. This paper asks whether such bias is the primary obstacle and what minimal fixes suffice. First, we re-examine standard discontinuous settings from prior work and introduce DDCG, a lightweight test that switches estimators in nonsmooth regions; with a single hyperparameter, DDCG achieves robust performance and remains reliable with small samples. Second, on differentiable robotics control tasks, we present IVW-H, a per-step inverse-variance implementation that stabilizes variance without explicit discontinuity detection and yields strong results. Together, these findings indicate that while estimator switching improves robustness in controlled studies, careful variance control often dominates in practical deployments.

Episodic control provides a highly sample-efficient method for reinforcement learning while enforcing high memory and computational requirements. This work proposes a simple heuristic for reducing these requirements, and an application to Model-Free Episodic Control (MFEC) is presented. Experiments on Atari games show that this heuristic successfully reduces MFEC computational demands while producing no significant loss of performance when conservative choices of hyperparameters are used. Consequently, episodic control becomes a more feasible option when dealing with reinforcement learning tasks.

In this study, an active disturbance rejection control (ADRC) toolbox for MATLAB/Simulink is introduced. Although ADRC has already been established as a powerful robust control framework with successful industrial implementations and strong theoretical foundations, a comprehensive tool for computer-aided design of ADRC has not been developed until now. The proposed open-source ADRC Toolbox is a response to the growing need in the scientific community and the control industry for a straightforward software application of the ADRC methodology. Its main purpose is to fill the gap between the current theories and applications of ADRC and to provide an easy-to-use solution for users in various control fields who want to employ the ADRC scheme in their applications. The ADRC Toolbox contains a single, general-purpose, drag-and-drop function block that allows the synthesis of a predefined ADRC-based strategy with minimal design effort. Additionally, its open structure allows creation of custom control solutions. The efficacy of the ADRC Toolbox is validated through both simulations and hardware experiments, which were conducted using a variety of problems known in the motion, process, and power control areas.

Independence testing is a fundamental and classical statistical problem that has been extensively studied in the batch setting when one fixes the sample size before collecting data. However, practitioners often prefer procedures that adapt to the complexity of a problem at hand instead of setting sample size in advance. Ideally, such procedures should (a) allow stopping earlier on easy tasks (and later on harder tasks), hence making better use of available resources, and (b) continuously monitor the data and efficiently incorporate statistical evidence after collecting new data, while controlling the false alarm rate. It is well known that classical batch tests are not tailored for streaming data settings: valid inference after data peeking requires correcting for multiple testing but such corrections generally result in low power. Following the principle of testing by betting, we design sequential kernelized independence tests (SKITs) that overcome such shortcomings. We exemplify our broad framework using bets inspired by kernelized dependence measures, e.g, the Hilbert-Schmidt independence criterion. Our test is valid under non-i.i.d. time-varying settings, for which there exist no batch tests. We demonstrate the power of our approaches on both simulated and real data.

Standard knowledge distillation for autoregressive models often suffers from distribution mismatch. While on-policy methods mitigate this by leveraging student-generated outputs, they rely on computationally expensive Reinforcement Learning (RL) frameworks. To improve efficiency, we propose Near-Policy Distillation (NPD), an asynchronous approach that decouples student generation from training. This reformulation enables Supervised Fine-Tuning (SFT) with sequence packing. However, asynchronous updates inevitably introduce policy lag and sample noise, which can cause the behavior to drift from near-policy toward off-policy. To counteract this without sacrificing efficiency, NPD integrates sparse student updates and the Δ-IFD filtering mechanism, a heuristic sample selection mechanism that empirically stabilizes the optimization trajectory. By filtering extreme out-of-distribution samples, Δ-IFD prevents noise from dominating the gradients, ensuring updates remain within a safe proximal learning zone. Empirically, the NPD framework achieves a 8.1x speedup over on-policy baselines and outperforms SFT by 8.09%. Crucially, by effectively narrowing the exploration space for subsequent RL, our method enables openPangu-Embedded-1B to reach a state-of-the-art score of 68.73%, outperforming the substantially larger Qwen3-1.7B. Codes will be released soon.

Proper weight initialization prior to training has historically been one of the key factors that helped kick off the deep learning revolution. Initialization is even more crucial in "reservoir computing", where the weights of a readout layer are learned linearly while the reservoir weights are fixed and largely determine the richness, stability and memory of the resulting dynamics. In the infinite-width limit it has been shown that meaningful initializations are those sitting at an effective critical point of the randomly initialized model. The phase transition is controlled by the weight variance g^2 and separates an ordered phase from a chaotic one where information progressively degrades. Here we derive a simple criterion to estimate the critical g_c for a broad class of recurrent architectures and we show that it closely tracks the gain at which a gated-RNN reservoir achieves peak performance on a chaotic forecasting task. Finally, we argue that our criterion can serve as a design principle for future initialization schemes.

On-policy distillation (OPD) aligns a student with a teacher on trajectories sampled from the student itself, reducing the train-test state mismatch of offline distillation. The same feedback loop can nevertheless be unstable: each update changes both the policy and the states on which the next update is computed. We introduce WDL-OPD, a mixture-constrained co-training method with two trainable policies. An anchor policy generates every rollout, an auxiliary policy evaluates the same visited states, and a geometric mixture of their token distributions is matched to a frozen teacher by reverse KL. Both policies receive gradient. We show that freezing the auxiliary recovers an anchor-plus-contrast proxy target closely related to OPD^2 and W2S-OPD, whereas joint training creates branch-level degrees of freedom that a static delta cannot express. In recorded Qwen3 experiments at 1.7B and 4B scale, WDL-OPD produces the strongest student checkpoint in each of four scale-domain settings. It raises MATH500 accuracy from 0.630 to 0.685 at 4B and from 0.521 to 0.585 at 1.7B. In code generation, seven single-policy OPD configurations exhibit entropy growth or trajectory degradation, while co-training reaches independently re-evaluated development scores of 0.637 and 0.375. Because several comparisons differ in curriculum or initialization, these results support a stabilization hypothesis rather than a universal causal claim. We provide the exact training algorithm, failure evidence, and the controlled comparison matrix needed to test that hypothesis.

Recently, a new Continual Learning (CL) paradigm was presented to control catastrophic forgetting, called Interval Continual Learning (InterContiNet), which relies on enforcing interval constraints on the neural network parameter space. Unfortunately, InterContiNet training is challenging due to the high dimensionality of the weight space, making intervals difficult to manage. To address this issue, we introduce HyperInterval, a technique that employs interval arithmetic within the embedding space and utilizes a hypernetwork to map these intervals to the target network parameter space. We train interval embeddings for consecutive tasks and train a hypernetwork to transform these embeddings into weights of the target network. An embedding for a given task is trained along with the hypernetwork, preserving the response of the target network for the previous task embeddings. Interval arithmetic works with a more manageable, lower-dimensional embedding space rather than directly preparing intervals in a high-dimensional weight space. Our model allows faster and more efficient training. Furthermore, HyperInterval maintains the guarantee of not forgetting. At the end of training, we can choose one universal embedding to produce a single network dedicated to all tasks. In such a framework, hypernetwork is used only for training and can be seen as a meta-trainer. HyperInterval obtains significantly better results than InterContiNet and gives SOTA results on several benchmarks.

Generative Behavior Cloning (GBC) is a simple yet effective framework for robot learning, particularly in multi-task settings. Recent GBC methods often employ diffusion policies with open-loop (OL) control, where actions are generated via a diffusion process and executed in multi-step chunks without replanning. While this approach has demonstrated strong success rates and generalization, its inherent stochasticity can result in erroneous action sampling, occasionally leading to unexpected task failures. Moreover, OL control suffers from delayed responses, which can degrade performance in noisy or dynamic environments. To address these limitations, we propose two novel techniques to enhance the consistency and reactivity of diffusion policies: (1) self-guidance, which improves action fidelity by leveraging past observations and implicitly promoting future-aware behavior; and (2) adaptive chunking, which selectively updates action sequences when the benefits of reactivity outweigh the need for temporal consistency. Extensive experiments show that our approach substantially improves GBC performance across a wide range of simulated and real-world robotic manipulation tasks. Our code is available at https://github.com/junhyukso/SGAC

Prompt engineering is crucial for deploying LLMs but is poorly understood mathematically. We formalize LLM systems as a class of discrete stochastic dynamical systems to explore prompt engineering through the lens of control theory. We investigate the reachable set of output token sequences R_y(mathbf x_0) for which there exists a control input sequence mathbf u for each mathbf y in R_y(mathbf x_0) that steers the LLM to output mathbf y from initial state sequence mathbf x_0. We offer analytic analysis on the limitations on the controllability of self-attention in terms of reachable set, where we prove an upper bound on the reachable set of outputs R_y(mathbf x_0) as a function of the singular values of the parameter matrices. We present complementary empirical analysis on the controllability of a panel of LLMs, including Falcon-7b, Llama-7b, and Falcon-40b. Our results demonstrate a lower bound on the reachable set of outputs R_y(mathbf x_0) w.r.t. initial state sequences mathbf x_0 sampled from the Wikitext dataset. We find that the correct next Wikitext token following sequence mathbf x_0 is reachable over 97% of the time with prompts of kleq 10 tokens. We also establish that the top 75 most likely next tokens, as estimated by the LLM itself, are reachable at least 85% of the time with prompts of kleq 10 tokens. Intriguingly, short prompt sequences can dramatically alter the likelihood of specific outputs, even making the least likely tokens become the most likely ones. This control-centric analysis of LLMs demonstrates the significant and poorly understood role of input sequences in steering output probabilities, offering a foundational perspective for enhancing language model system capabilities.

Model Predictive Controllers (MPC) require a good model for the controlled process. In this paper I infer inductive biases about a physical system. I use these biases to derive a new neural network architecture that can model this real system that has noise and inertia. The main inductive biases exploited here are: the delayed impact of some inputs on the system and the separability between the temporal component and how the inputs interact to produce the output of a system. The inputs are independently delayed using shifted convolutional kernels. Feature interactions are modelled using a fully connected network that does not have access to temporal information. The available data and the problem setup allow the usage of Self Supervised Learning in order to train the models. The baseline architecture is an Attention based Reccurent network adapted to work with MPC like inputs. The proposed networks are faster, better at exploiting larger data volumes and are almost as good as baseline networks in terms of prediction performance. The proposed architecture family called Delay can be used in a real scenario to control systems with delayed responses with respect to its controls or inputs. Ablation studies show that the presence of delay kernels are vital to obtain any learning in proposed architecture. Code and some experimental data are available online.

Conditional image editing aims to modify a source image according to textual prompts and optional reference guidance. Such editing is crucial in scenarios requiring strict structural control (i.e., anomaly insertion in driving scenes and complex human pose transformation). Despite recent advances in large-scale editing models (i.e., Seedream, Nano Banana, etc), most approaches rely on single-step generation. This paradigm often lacks explicit quality control, may introduce excessive deviation from the original image, and frequently produces structural artifacts or environment-inconsistent modifications, typically requiring manual prompt tuning to achieve acceptable results. We propose CAMEO, a structured multi-agent framework that reformulates conditional editing as a quality-aware, feedback-driven process rather than a one-shot generation task. CAMEO decomposes editing into coordinated stages of planning, structured prompting, hypothesis generation, and adaptive reference grounding, where external guidance is invoked only when task complexity requires it. To overcome the lack of intrinsic quality control in existing methods, evaluation is embedded directly within the editing loop. Intermediate results are iteratively refined through structured feedback, forming a closed-loop process that progressively corrects structural and contextual inconsistencies. We evaluate CAMEO on anomaly insertion and human pose switching tasks. Across multiple strong editing backbones and independent evaluation models, CAMEO consistently achieves 20\% more win rate on average compared to multiple state-of-the-art models, demonstrating improved robustness, controllability, and structural reliability in conditional image editing.

Traditional control methods are inadequate in many deployment settings involving control of Cyber-Physical Systems (CPS). In such settings, CPS controllers must operate and respond to unpredictable interactions, conditions, or failure modes. Dealing with such unpredictability requires the use of executive and cognitive control functions that allow for planning and reasoning. Motivated by the sport of drone racing, this dissertation addresses these concerns for state-of-the-art flight control by investigating the use of deep neural networks to bring essential elements of higher-level cognition for constructing low level flight controllers. This thesis reports on the development and release of an open source, full solution stack for building neuro-flight controllers. This stack consists of the methodology for constructing a multicopter digital twin for synthesize the flight controller unique to a specific aircraft, a tuning framework for implementing training environments (GymFC), and a firmware for the world's first neural network supported flight controller (Neuroflight). GymFC's novel approach fuses together the digital twinning paradigm for flight control training to provide seamless transfer to hardware. Additionally, this thesis examines alternative reward system functions as well as changes to the software environment to bridge the gap between the simulation and real world deployment environments. Work summarized in this thesis demonstrates that reinforcement learning is able to be leveraged for training neural network controllers capable, not only of maintaining stable flight, but also precision aerobatic maneuvers in real world settings. As such, this work provides a foundation for developing the next generation of flight control systems.

We develop a learning-based framework for constructing shrinking disturbance-invariant tubes under state- and input-dependent uncertainty, intended as a building block for tube Model Predictive Control (MPC), and certify safety via a lifted, isotone (order-preserving) fixed-point map. Gaussian Process (GP) posteriors become (1-α) credible ellipsoids, then polytopic outer sets for deterministic set operations. A two-time-scale scheme separates learning epochs, where these polytopes are frozen, from an inner, outside-in iteration that converges to a compact fixed point Z^star!subseteq!mathcal G; its state projection is RPI for the plant. As data accumulate, disturbance polytopes tighten, and the associated tubes nest monotonically, resolving the circular dependence between the set to be verified and the disturbance model while preserving hard constraints. A double-integrator study illustrates shrinking tube cross-sections in data-rich regions while maintaining invariance.

Recent advancements in parallel simulation and successful robotic applications are spurring a resurgence in sampling-based model predictive control. To build on this progress, however, the robotics community needs common tooling for prototyping, evaluating, and deploying sampling-based controllers. We introduce Judo, a software package designed to address this need. To facilitate rapid prototyping and evaluation, Judo provides robust implementations of common sampling-based MPC algorithms and standardized benchmark tasks. It further emphasizes usability with simple but extensible interfaces for controller and task definitions, asynchronous execution for straightforward simulation-to-hardware transfer, and a highly customizable interactive GUI for tuning controllers interactively. While written in Python, the software leverages MuJoCo as its physics backend to achieve real-time performance, which we validate across both consumer and server-grade hardware. Code at https://github.com/bdaiinstitute/judo.

On-policy distillation (OPD) reduces train-test state mismatch by training a student on its own generated trajectories, but weak students may visit teacher-misaligned prefixes where supervision is less representative. We introduce SAKI (Supervision Allocation with KL-constrained Interpolation), which combines a KL-constrained teacher-guided rollout with maximal coupling and reuses realized accept/correction events to route token-level supervision. Accepted positions retain sampled-token reverse-KL supervision, while correction positions receive direct supervision on the teacher's highest-probability token. Under maximal coupling, the correction probability is exactly TV(p_t, q_t), so the same trust-region radius controls rollout deviation and upper-bounds intervention and specialized-supervision frequency. We further implement an engine-resident speculative verifier that preserves the exact-q trajectory distribution and coupling semantics while improving matched-workload rollout throughput by 4.22x. Across seven mathematical reasoning benchmarks, SAKI improves the matched teacher-guided baseline in Mean@8 and Pass@8 for both 1.7B and 0.6B students. Placement controls and fixed-prefix analysis further support correction-triggered routing as a conflict-adaptive supervision signal.

We consider funnel control for linear infinite-dimensional systems that are impedance passive, meaning that they satisfy an energy balance in which the stored energy equals the squared norm of the state and the supplied power is the inner product of input and output. For the analysis we employ the system node approach, which offers a unified framework for infinite-dimensional systems with boundary and distributed control and observation. The resulting closed-loop dynamics are governed by a nonlinear evolution equation; we establish its solvability and hence the applicability of funnel control to this class. The applicability is illustrated by an Euler-Bernoulli beam, which is studied in two distinct scenarios: once with boundary control and once with distributed control.

Large language models are sometimes trained with imperfect oversight signals, leading to undesired behaviors such as reward hacking and sycophancy. Improving oversight quality can be expensive or infeasible, motivating methods that improve learned behavior despite an imperfect training signal. We introduce Inoculation Prompting (IP), a simple but counterintuitive technique that prevents learning of an undesired behavior by modifying training prompts to explicitly request it. For example, to inoculate against reward hacking, we modify the prompts used in supervised fine-tuning to request code that only works on provided test cases but fails on other inputs. Across four settings we find that IP reduces the learning of undesired behavior without substantially reducing the learning of desired capabilities. We also show that prompts which more strongly elicit the undesired behavior prior to fine-tuning more effectively inoculate against the behavior when used during training; this serves as a heuristic to identify promising inoculation prompts. Overall, IP is a simple yet effective way to control how models generalize from fine-tuning, preventing learning of undesired behaviors without substantially disrupting desired capabilities.