Daily Papers

Standard decoding rules for autoregressive language models promote diversity by rescaling the full next-token distribution or truncating its low-probability tail. These strategies overlook a common regime of open-ended generation in which several continuations are plausible but too much probability mass remains concentrated on the most generic choice. We introduce XTC (Exclude Top Choices), a lightweight head-aware decoding operator that targets this regime directly. XTC identifies tokens whose probabilities exceed an absolute plausibility threshold τ: when at least two qualify, it removes the dominant eligible choices with probability ρ and retains only the weakest plausible alternative before renormalization. Across 60 experiments on Gemma 3 27B Q4, Gemma 3 12B Q6, and DeepSeek R1 14B Q6, with scaling validation on Llama 3.3 70B Q4, XTC improves the diversity-repetition Pareto frontier. On creative generation, Distinct-2 increases by 11--15% and repeat trigrams decrease by 27--47% across the four models. Combined with temperature scaling, gains reach 38% in Distinct-2 and 71% in repeat-trigram reduction over baseline. A blinded Amazon Mechanical Turk study with 150 Master raters yields a 62.3% creativity preference for XTC (p<10^{-4}) without reduced fluency, while a GPT-4o control judge reproduces the Anthropic-judge direction on every measure. On IFEval with Llama 3.3 70B Q4, XTC preserves prompt-level strict accuracy within 1.7 percentage points of baseline while recovering most of the diversity gain; a temperature setting matched on Distinct-2 reduces IFEval by 8.8 points. The effect is additive with temperature and repetition penalties, robust across quantization levels and model families, and consistent across twelve prompt genres. XTC has been adopted by llama.cpp, ExLlamaV2, and text-generation-webui.

We introduce a novel architecture design that enhances expressiveness by incorporating multiple head classifiers (\ie, classification heads) instead of relying on channel expansion or additional building blocks. Our approach employs attention-based aggregation, utilizing pairwise feature similarity to enhance multiple lightweight heads with minimal resource overhead. We compute the Gramian matrices to reinforce class tokens in an attention layer for each head. This enables the heads to learn more discriminative representations, enhancing their aggregation capabilities. Furthermore, we propose a learning algorithm that encourages heads to complement each other by reducing correlation for aggregation. Our models eventually surpass state-of-the-art CNNs and ViTs regarding the accuracy-throughput trade-off on ImageNet-1K and deliver remarkable performance across various downstream tasks, such as COCO object instance segmentation, ADE20k semantic segmentation, and fine-grained visual classification datasets. The effectiveness of our framework is substantiated by practical experimental results and further underpinned by generalization error bound. We release the code publicly at: https://github.com/Lab-LVM/imagenet-models.

Large language models (LLMs) can generate fluent reasoning traces that nevertheless lead to incorrect answers, making response-level uncertainty estimation important for abstention, human review, and adaptive compute allocation. Existing approaches generally fall into three categories: passive single-trace methods use token-level confidence signals, sampling-based methods compare multiple complete traces at higher generation cost, and active prefix-based methods probe partial traces to study answer stabilization or preference transitions. However, none actively re-elicits an answer from a completed reasoning trace to measure its consistency with and support for the original answer. To address this gap, we introduce Trace-Conditioned Answer Consistency (TrAC), a correctness-supervised uncertainty quantification framework that combines active and passive signals anchored to one completed reasoning trace. Its active component, Prefix-Conditioned Elicitation (PCE), re-elicits a short answer conditioned on the completed trace and represents both its consistency with the original answer and its token-level probabilistic support. Its passive component, Trace Uncertainty Profile (TUP), summarizes how token-level uncertainty evolves throughout the original generation without additional decoding. A lightweight head then integrates the two representations into a response-correctness score. Across five mathematical reasoning benchmarks and three LLM families, TrAC improves macro AUROC by 1.8% and reduces AURC by 3.4% relative to eight-sample self-consistency, while using one complete reasoning trace and a short cached answer probe. When eight samples are already available, augmenting sample consensus with re-elicitation further improves macro AUROC by 4.3% and reduces AURC by 8.3%, without additional full-trace generation.

Time-series classifiers deployed in risk-sensitive domains must be (1) accurate, (2) interpretable, and (3) able to abstain when evidence is weak. Existing methods do not deliver all 3 at once, and the obstacle is structural, rather than logistical. Meaningful temporal patterns cannot be defined without knowing segment boundaries, yet meaningful boundaries cannot be placed without knowing which patterns to expect. Existing approaches break this circularity by using fixed windows or expert-annotated vocabularies, thereby sacrificing at least one of the 3 properties. We introduce ConceptTime, which closes the loop through a single self-supervised signal. A frozen probabilistic forecaster predicts a distribution over the next observation at every timestep of the sequence. We call the mismatch between its prediction and the realized signal the predictive surprise. This signal both locates segment boundaries and characterizes each resulting segment through the forecaster. Segments are thus grounded by how they behaved relative to expectation, not by what they look like. These summaries cluster into a vocabulary of dynamical regimes that we call concepts. A lightweight head classifies from the concept sequence, and the distance to the nearest concept yields reliability by design. Across 17 public benchmarks, ConceptTime is competitive with state-of-the-art black-box accuracy, beats every interpretable baseline, and retains near-98% accuracy on Epilepsy with 1% of labels. It further remains competitive with softmax, prototype-distance, and SHAP/TimeX/TimeX++ on OOD detection and deletion faithfulness, without a single annotation, language model call, or domain expert. Code is available at: https://github.com/Sachithx/ConceptTime.git.

This paper tackles the problem of depth estimation from a single image. Existing work either focuses on generalization performance disregarding metric scale, i.e. relative depth estimation, or state-of-the-art results on specific datasets, i.e. metric depth estimation. We propose the first approach that combines both worlds, leading to a model with excellent generalization performance while maintaining metric scale. Our flagship model, ZoeD-M12-NK, is pre-trained on 12 datasets using relative depth and fine-tuned on two datasets using metric depth. We use a lightweight head with a novel bin adjustment design called metric bins module for each domain. During inference, each input image is automatically routed to the appropriate head using a latent classifier. Our framework admits multiple configurations depending on the datasets used for relative depth pre-training and metric fine-tuning. Without pre-training, we can already significantly improve the state of the art (SOTA) on the NYU Depth v2 indoor dataset. Pre-training on twelve datasets and fine-tuning on the NYU Depth v2 indoor dataset, we can further improve SOTA for a total of 21% in terms of relative absolute error (REL). Finally, ZoeD-M12-NK is the first model that can jointly train on multiple datasets (NYU Depth v2 and KITTI) without a significant drop in performance and achieve unprecedented zero-shot generalization performance to eight unseen datasets from both indoor and outdoor domains. The code and pre-trained models are publicly available at https://github.com/isl-org/ZoeDepth .

Visual foundation models (VFMs) have become increasingly popular due to their state-of-the-art performance. However, interpretability remains crucial for critical applications. In this sense, self-explainable models (SEM) aim to provide interpretable classifiers that decompose predictions into a weighted sum of interpretable concepts. Despite their promise, recent studies have shown that these explanations often lack faithfulness. In this work, we combine VFMs with a novel prototypical architecture and specialized training objectives. By training only a lightweight head (approximately 1M parameters) on top of frozen VFMs, our approach (ProtoFM) offers an efficient and interpretable solution. Evaluations demonstrate that our approach achieves competitive classification performance while outperforming existing models across a range of interpretability metrics derived from the literature. Code is available at https://github.com/hturbe/proto-fm.

Model merging offers a training-free way to combine multiple post-trained expert models, but merging experts obtained through reinforcement learning (RL) remains challenging. Existing spectral merging methods often assume that leading singular directions contain the main task signal, while lower-energy residual components can be compressed, selected, or attenuated to reduce interference. We find that this assumption does not hold for RL task vectors: after decomposing each task vector into a leading spectral head and a residual component, both parts can independently recover substantial behavior knowledge, while exhibiting different merging properties. The head is highly concentrated and informative but more prone to sharp cross-expert conflicts, whereas the residual component is more dispersed and provides a more stable basis for aggregation. Based on this observation, we propose ResMerge, a residual-based spectral merging framework for RL experts. ResMerge first constructs a stable residual backbone with Spherical Residual Consensus Adaptation, which estimates a reliability-weighted consensus direction on the Frobenius sphere. It then reintroduces leading-head information through a Lightweight Head Correction module gated by positive cross-expert agreement. Experiments across multiple RL expert groups and capability domains show that ResMerge better preserves expert capabilities than representative task-vector and spectral merging baselines.

The "end-to-end" label for LLMs is a misnomer. In practice, they depend on a non-differentiable decoding process that requires laborious, hand-tuning of hyperparameters like temperature and top-p. This paper introduces AutoDeco, a novel architecture that enables truly "end-to-end" generation by learning to control its own decoding strategy. We augment the standard transformer with lightweight heads that, at each step, dynamically predict context-specific temperature and top-p values alongside the next-token logits. This approach transforms decoding into a parametric, token-level process, allowing the model to self-regulate its sampling strategy within a single forward pass. Through extensive experiments on eight benchmarks, we demonstrate that AutoDeco not only significantly outperforms default decoding strategies but also achieves performance comparable to an oracle-tuned baseline derived from "hacking the test set"-a practical upper bound for any static method. Crucially, we uncover an emergent capability for instruction-based decoding control: the model learns to interpret natural language commands (e.g., "generate with low randomness") and adjusts its predicted temperature and top-p on a token-by-token basis, opening a new paradigm for steerable and interactive LLM decoding.

Transformers are intuitively considered to be efficient at copying from their inputs. We actually show that the ability of LLMs to copy in context can be improved through explicit modeling. We propose Copy-Paste Language Models (CPLMs), which add a lightweight Copy-Paste head to the conventional language modeling (LM) head. CPLMs improve training efficiency, downstream performance, and offer new operating points in long-context and retrieval setups. We validate our approach by pretraining models from 135M to 1.7B parameters, showing improvements across all scales and backbones with negligible training and inference overheads. We explain the success of CPLMs by showing that they partially mitigate the LM head gradient bottleneck through an alternative gradient path.

Specular highlights distort appearance, obscure texture, and hinder geometric reasoning in both natural and surgical imagery. We present UnReflectAnything, an RGB-only framework that removes highlights from a single image by predicting a highlight map together with a reflection-free diffuse reconstruction. The model uses a frozen vision transformer encoder to extract multi-scale features, a lightweight head to localize specular regions, and a token-level inpainting module that restores corrupted feature patches before producing the final diffuse image. To overcome the lack of paired supervision, we introduce a Virtual Highlight Synthesis pipeline that renders physically plausible specularities using monocular geometry, Fresnel-aware shading, and randomized lighting which enables training on arbitrary RGB images with correct geometric structure. UnReflectAnything generalizes across natural and surgical domains where non-Lambertian surfaces and non-uniform lighting create severe highlights and it achieves competitive performance with state-of-the-art results on several benchmarks. Project Page: https://alberto-rota.github.io/UnReflectAnything/

Combining diverse foundation models is promising, but weight-merging is limited by mismatched architectures and closed APIs. Trinity addresses this with a lightweight coordinator that orchestrates collaboration among large language models (LLMs). The coordinator, comprising a compact language model (approximately 0.6B parameters) and a lightweight head (approximately 10K parameters), is optimized with an evolutionary strategy for efficient and adaptive delegation. Trinity processes queries over multiple turns, where at each turn the coordinator assigns one of three roles (Thinker, Worker, or Verifier) to a selected LLM, effectively offloading complex skill acquisition from the coordinator itself. Experiments show that Trinity consistently outperforms individual models and existing methods across coding, math, reasoning, and domain knowledge tasks, and generalizes robustly to out-of-distribution tasks. On standard benchmarks, Trinity achieves state-of-the-art results, including a score of 86.2% on LiveCodeBench. Theoretical and empirical analyses identify two main factors behind this performance: (1) the coordinator's hidden-state representations provide rich contextualization of inputs, and (2) under high dimensionality and strict budget constraints, the separable Covariance Matrix Adaptation Evolution Strategy offers advantages over reinforcement learning, imitation learning, and random search by exploiting potential block-epsilon-separability.

In this report, we present a fast and accurate object detection method dubbed DAMO-YOLO, which achieves higher performance than the state-of-the-art YOLO series. DAMO-YOLO is extended from YOLO with some new technologies, including Neural Architecture Search (NAS), efficient Reparameterized Generalized-FPN (RepGFPN), a lightweight head with AlignedOTA label assignment, and distillation enhancement. In particular, we use MAE-NAS, a method guided by the principle of maximum entropy, to search our detection backbone under the constraints of low latency and high performance, producing ResNet-like / CSP-like structures with spatial pyramid pooling and focus modules. In the design of necks and heads, we follow the rule of "large neck, small head". We import Generalized-FPN with accelerated queen-fusion to build the detector neck and upgrade its CSPNet with efficient layer aggregation networks (ELAN) and reparameterization. Then we investigate how detector head size affects detection performance and find that a heavy neck with only one task projection layer would yield better results. In addition, AlignedOTA is proposed to solve the misalignment problem in label assignment. And a distillation schema is introduced to improve performance to a higher level. Based on these new techs, we build a suite of models at various scales to meet the needs of different scenarios, i.e., DAMO-YOLO-Tiny/Small/Medium. They can achieve 43.0/46.8/50.0 mAPs on COCO with the latency of 2.78/3.83/5.62 ms on T4 GPUs respectively. The code is available at https://github.com/tinyvision/damo-yolo.

Vision-Language Models suffer severe KV cache pressure at inference, as a single image often encodes into thousands of tokens. Most existing methods exploit token sparsity through token pruning, but permanently discarding visual content causes substantial degradation on fine-grained perception tasks. This motivates a complementary axis, feature sparsity: under a fixed KV cache budget, compressing the channel dimension preserves more visual tokens at the same memory cost. Prior Key channel pruning methods, however, face a structural trade-off: token-wise channel pruning is expressive but unstructured and slow, while head-wise approach is hardware-friendly but less robust. We resolve this with RotateK, a rotation-based structured Key channel pruning framework. RotateK applies an online PCA-based rotation that aligns token-dependent channel importance into a shared low-dimensional subspace, enabling accurate pruning under lightweight head-wise masks; a fused Triton attention kernel operates directly on sparse-channel Keys for efficient decoding. Experiments on two representative VLM backbones show that RotateK consistently outperforms prior Key channel pruning in both accuracy and decoding latency, while joint token-channel pruning improves over token-only baselines at matched KV cache budgets.

Embodied visual tracking requires a robot to identify a designated target from visual observations and control its own motion to follow that target through an environment. Following an isolated person is a comparatively simple demonstration of embodied visual tracking, but following the intended person among distractors remains challenging. Existing methods exhibit a substantial drop in success from single-target to distractor tracking, motivating a focus on the shared spaces that person-following robots must navigate. We present , a vision--language waypoint policy built around the hypothesis that visual and language representations should be aligned before tracking-specific motion is learned. The policy combines complementary frozen visual encoders, multiscale temporal context, a transformer backbone, and a lightweight head for robot-centric waypoint prediction. Its training progresses through vision--language alignment, multimodal reasoning mid-training, and tracking specialization on 19,532 oracle episodes. Compared with 41.54\% distractor-tracking success for our earlier OmTrackVLA model, the complete multi-stage recipe achieves 55.80\%. We then explore on-policy refinement using filtered oracle labels for states visited by the policy. This preliminary study adds 2.42 percentage points of distractor-tracking success, reaching 58.22\%, while reducing collision rate by 1.99 pts. The final policy records the highest distractor- and ambiguous-tracking success rates among the compared methods. These results support staged multimodal learning as a promising direction for tracking among distractors and motivate further study of on-policy refinement for person following in shared spaces.

Tabular encoders are usually evaluated inside task-specific end-to-end pipelines, so models from different training paradigms are difficult to compare directly even when they operate on similar tabular signals. We introduce TRL-Bench, a multi-granular tabular representation learning (TRL) benchmark that standardizes cross-paradigm representation-level evaluation: each encoder exports row-, column-, or table embeddings through its supported wrapper, and shared lightweight heads probe them across three suites: TRL-CTbench (column/table), TRL-Rbench (row), and TRL-DLTE (compositional Data-Lake Table Enrichment spanning all three granularities). To support this standardized setting, we release curated benchmark assets and task reformulations, including 50 OpenML tables with 123 verified targets, 16 row-pair linkage rewrites, and a 47,772-table DLTE lake derived from 1,379 parent tables. Across 20 models and 16 tasks, TRL-Bench shows that once downstream conditions are standardized, encoder quality is capability-specific rather than captured by a single leaderboard. In TRL-CTbench, generic text encoders often lead on tasks with strong surface-text signal, while tabular specialists win where their pretraining objective aligns with the task. In TRL-Rbench, within-table prediction and cross-table linkage favor different training regimes, with atomic linkage performance correlating strongly with the row-matching stage of DLTE pipelines. In TRL-DLTE, the strongest pipelines combine capability-matched specialists rather than reuse a single encoder, and top end-to-end quality depends on non-additive compositional fit rather than per-stage marginal rank alone. TRL-Bench provides a common protocol for measuring reusable signal in exported tabular representations under shared downstream conditions. Code and data: https://github.com/LOGO-CUHKSZ/TRL-Bench

Recent video-based world models pair the scalability of autoregressive (AR) prediction with the visual quality of diffusion models. The choice of scene tokenizer is paramount for the optimal performance of each of these, both in terms of fidelity and semantics. Flexible-length, coarse-to-fine tokenizers yield exactly that: the first coarse tokens carry the clip's global semantics while later tokens further specify details. Existing flexible tokenizers only apply a representation-alignment (REPA) loss on early decoder hidden states, a target the decoder can partly meet from its noised input instead. We introduce SemanTok, a flexible video tokenizer that feeds frozen DINO features into its encoder and adds lightweight heads that reconstruct them from each retained token prefix alone. SemanTok achieves high semantic alignment and video fidelity at every AR model size: a 201M SemanTok AR model matches or beats a VideoFlexTok AR model 3.4times its size, and larger SemanTok AR models further improve fidelity. It keeps semantic alignment on out-of-distribution classes and gives the decoder higher semantic alignment at every noise level, including pure noise. It performs well in both reconstruction and generation, and its short token prefixes are cheaper to predict and give better generation fidelity, with pixel detail deferred to later tokens.

Mobile GUI agents are typically fine-tuned 7B-scale vision-language models (VLMs) that generate each action as text. However, these VLMs decode every action token by token, and even agents that score candidate actions keep a large language model or VLM in the loop, making them slow and memory-hungry. To address these issues, we propose GUI-JEPA, to our knowledge the first decoder-free GUI agent policy built on a Joint-Embedding Predictive Architecture (JEPA), which selects actions in the latent space of a JEPA encoder pretrained on unlabelled GUI screenshots. Its action- and region-conditioned latent predictor turns the screen latent into one latent per candidate action, letting lightweight heads score all candidates against the instruction in a single batched pass, without decoding a token. We further show that the scorer relies on this latent pathway and that the predictor is trained for the decision itself: a randomly initialised predictor does just as well as one pretrained on screen dynamics. On AndroidControl, GUI-JEPA is 2.8-4.0x faster on the same GPU than a Qwen2.5-VL-7B agent we fine-tune with the same inputs, while reaching 86-92% of its in-distribution accuracy with 6% of its parameters. Code is available at https://github.com/bcwang-sjtu/GUI-JEPA

Emerging wearables, such as smart glasses, can deliver notifications through multiple sensory channels, but there is still a limited understanding of how to choose the right channel at the right moment. We propose HeadRoom, a lightweight, edge-deployable pipeline that estimates the availability of visual and auditory channels in real time from egocentric video and audio. Our controlled user study (N=25) shows that, under high perceptual load, routing notifications to the more available channel reduces response time relative to routing them to the less available channel. This work opens up a new possibility for adaptive routing of notifications in wearable and immersive systems.

Current auto-regressive models can generate high-quality, topologically precise meshes; however, they necessitate thousands-or even tens of thousands-of next-token predictions during inference, resulting in substantial latency. We introduce XSpecMesh, a quality-preserving acceleration method for auto-regressive mesh generation models. XSpecMesh employs a lightweight, multi-head speculative decoding scheme to predict multiple tokens in parallel within a single forward pass, thereby accelerating inference. We further propose a verification and resampling strategy: the backbone model verifies each predicted token and resamples any tokens that do not meet the quality criteria. In addition, we propose a distillation strategy that trains the lightweight decoding heads by distilling from the backbone model, encouraging their prediction distributions to align and improving the success rate of speculative predictions. Extensive experiments demonstrate that our method achieves a 1.7x speedup without sacrificing generation quality. Our code will be released.

Sparse attention accelerates video diffusion by allowing each attention head to focus on only a small subset of interactions. Existing methods already construct head-specific sparse patterns conditioned on the input. However, we find that these heads also differ in two less obvious but practically important ways. First, for some heads, sparse attention masks remain stable across many denoising steps, whereas others change rapidly. Second, heads differ substantially in their sensitivity to sparsification: applying the same threshold can induce markedly different errors in the final denoising velocity. Ignoring these differences leads to redundant mask prediction and suboptimal threshold calibration across heads under a global sparsity budget. We present HEART, short for Heterogeneity-Exploiting Adaptive Refresh and Thresholding, a training-free framework that exploits both forms of head heterogeneity. First, Temporal Mask Reuse (TMR) uses a lightweight per-head query-key drift signal to determine whether a cached sparse mask remains reliable across denoising steps, refreshing it only when the drift exceeds a prescribed threshold. Second, Error-guided Budgeted Calibration (EBC) evaluates candidate thresholds offline using a frequency-weighted denoising-velocity error, and assigns each head an appropriate threshold under a global sparsity budget. HEART requires no retraining, weight modification, or sparse-kernel changes, and can be integrated directly into existing sparse-attention pipelines. Across Wan2.1-1.3B, Wan2.1-14B, and HunyuanVideo-13B, HEART consistently pushes the quality--efficiency frontier of advanced sparse attention methods such as XAttention and SVG2 outward.

Existing neural head avatars methods have achieved significant progress in the image quality and motion range of portrait animation. However, these methods neglect the computational overhead, and to the best of our knowledge, none is designed to run on mobile devices. This paper presents MobilePortrait, a lightweight one-shot neural head avatars method that reduces learning complexity by integrating external knowledge into both the motion modeling and image synthesis, enabling real-time inference on mobile devices. Specifically, we introduce a mixed representation of explicit and implicit keypoints for precise motion modeling and precomputed visual features for enhanced foreground and background synthesis. With these two key designs and using simple U-Nets as backbones, our method achieves state-of-the-art performance with less than one-tenth the computational demand. It has been validated to reach speeds of over 100 FPS on mobile devices and support both video and audio-driven inputs.

Retrieval-Augmented Generation (RAG) is widely used to augment the input to Large Language Models (LLMs) with external information, such as recent or domain-specific knowledge. Nonetheless, current models still produce closed-domain hallucinations and generate content that is unsupported by the retrieved context. Current detection approaches typically treat hallucination as a post-hoc problem, relying on black-box consistency checks or probes over frozen internal representations. In this work, we demonstrate that hallucination detection based on internal state representation can also serve as a direct training signal. We introduce RAGognize, a dataset of naturally occurring closed-domain hallucinations with token-level annotations, and RAGognizer, a hallucination-aware fine-tuning approach that integrates a lightweight detection head into an LLM, allowing for the joint optimization of language modeling and hallucination detection. This joint objective forces the model to improve the separability of its internal states regarding hallucinations while simultaneously learning to generate well-formed and meaningful responses. Across multiple benchmarks, RAGognizer achieves state-of-the-art token-level hallucination detection while substantially reducing hallucination rates during generation, without degrading language quality or relevance.

Human conversation involves continuous exchanges of speech and nonverbal cues such as head nods, gaze shifts, and facial expressions that convey attention and emotion. Modeling these bidirectional dynamics in 3D is essential for building expressive avatars and interactive robots. However, existing frameworks often treat talking and listening as independent processes or rely on non-causal full-sequence modeling, hindering temporal coherence across turns. We present TIMAR (Turn-level Interleaved Masked AutoRegression), a causal framework for 3D conversational head generation that models dialogue as interleaved audio-visual contexts. It fuses multimodal information within each turn and applies turn-level causal attention to accumulate conversational history, while a lightweight diffusion head predicts continuous 3D head dynamics that captures both coordination and expressive variability. Experiments on the DualTalk benchmark show that TIMAR reduces Fréchet Distance and MSE by 15-30% on the test set, and achieves similar gains on out-of-distribution data. The source code will be released in the GitHub repository https://github.com/CoderChen01/towards-seamleass-interaction.

Optimizing recommender systems for objectives beyond accuracy, such as diversity, novelty, and personalization, is crucial for long-term user satisfaction. To this end, industrial practitioners have accumulated vast amounts of structured domain knowledge, which we term human priors (e.g., item taxonomies, temporal patterns). This knowledge is typically applied through post-hoc adjustments during ranking or post-ranking. However, this approach remains decoupled from the core model learning, which is particularly undesirable as the industry shifts to end-to-end generative recommendation foundation models. On the other hand, many methods targeting these beyond-accuracy objectives often require architecture-specific modifications and discard these valuable human priors by learning user intent in a fully unsupervised manner. Instead of discarding the human priors accumulated over years of practice, we introduce a backbone-agnostic framework that seamlessly integrates these human priors directly into the end-to-end training of generative recommenders. With lightweight, prior-conditioned adapter heads inspired by efficient LLM decoding strategies, our approach guides the model to disentangle user intent along human-understandable axes (e.g., interaction types, long- vs. short-term interests). We also introduce a hierarchical composition strategy for modeling complex interactions across different prior types. Extensive experiments on three large-scale datasets demonstrate that our method significantly enhances both accuracy and beyond-accuracy objectives. We also show that human priors allow the backbone model to more effectively leverage longer context lengths and larger model sizes.

Video temporal grounding supports applications such as video search, content review, and automated editing by localizing events described in natural language. Yet existing generative models typically output timestamps without explicit interval-level confidence scores to guide candidate selection. We separate candidate generation from acceptance by scoring individual intervals within the original decoding pass. A lightweight confidence head reads pooled decoder states, providing an explicit score trained for interval selection. Offline verifier scores supervise the head on fixed candidate sequences, and temporal-overlap labels adapt it to current rollouts during reinforcement learning. GT-anchored candidate-pool supervision and set-level optimization train the generator. The resulting scores support ranking, threshold-based selection, and rejection without invoking an external verifier at inference. On a fixed OMTG-Bench candidate pool, confidence raises query-macro Recall@0.5 from 9.95% to 14.42% over generation order at a 10% global return budget, and from 26.48% to 31.12% at a 25% budget. The continuous scores let downstream applications adjust return budgets or acceptance thresholds to match their precision-recall preferences, without regenerating candidate intervals.

Visual grounding combines image--language understanding with geometric prediction, yet autoregressive multimodal models often express a box as a coordinate sequence. Sequential decoding adds computation to the multimodal processing needed for localization. Adapting these representations to box geometry offers a route to direct prediction. We present Jag, which adapts a compact pretrained multimodal model for direct continuous box prediction. A lightweight regression head reads the last valid input-token state, conditioned on the image and referring expression, and predicts all four box coordinates together. Geometric supervision jointly adapts the language backbone, visual merger, and regression head, allowing localization losses to shape both the multimodal representations and the coordinate mapping. Inference retains image--language processing and returns the box in one forward pass, without coordinate generation or text parsing. Across benchmarks, Jag consistently improves grounding accuracy over its base model across the observed target sizes and expression groups. Component ablation show that jointly adapting the representations and head substantially improves accuracy over training the head alone. Against existing specialized grounding models, it achieves competitive accuracy with lower single-request latency and GPU memory use. These results show how supervision tailored to the geometric answer can specialize a compact pretrained multimodal model for accurate grounding and efficient direct prediction. Project page: https://xyzzzh.github.io/Jag/

Backchannels, brief acknowledgements like "uh-huh" produced while the other party may still be talking, are central to natural conversation, but full-duplex spoken dialogue models rarely model them explicitly. We introduce a lightweight backchannel head that predicts, from a full-duplex model's own hidden states, when a backchannel should begin. Once this probability crosses a tunable threshold, a backchannel is force-decoded. Attached to both a 7B (PersonaPlex) and a 1B (F-Actor) model, it generalizes across scale. Probing confirms the hidden states anticipate real human timing, and generation evaluation shows more frequent, better-timed backchannels. Human raters judge the resulting backchannels on par with real ones.

Speculative decoding has become a mainstream technique for accelerating large language model (LLM) inference by using a lightweight draft model to generate candidate tokens that are subsequently verified by the target model. However, agentic workloads introduce long and continuously evolving contexts and frequent multi-turn interactions. Under such workloads, we observe that existing draft models suffer from up to an 80% degradation in acceptance length, while maintaining their historical KV cache introduces substantial system overhead. In this paper, we identify the growing historical context as a common source of both problems and introduce DLite, a history-free speculative decoding framework for agentic AI. DLite directly reuses contextual hidden states from the target model and performs local speculative prediction without explicitly maintaining the historical context, transforming an increasingly complex modeling problem into local simple prediction problem. A lightweight sequential head further restores intra-block causal dependencies with low overhead. To effectively train this heterogeneous history-free architecture, we introduce a tailored two-stage training strategy. Experiments on general-purpose, long-context and agentic workloads show that DLite achieves 2-6 acceptance length and outperforms the state-of-the-art speculative decoding method, DSpark, up to 70%.

Standard autoregressive language models generate text sequentially, but revision requires referring back to tokens in the input context or those already generated. Causal Edit Serialization (CES) is introduced as a framework for expressing such revisions within the same causal token stream. Special pointer tokens are paired with predicted source addresses, allowing insertion, deletion, replacement, copying and movement to be localized explicitly. A lightweight localization head and dual-index rotary position encoding support both address prediction and conditioning on previously emitted pointers, while retaining a standard causal attention mask. A pretraining procedure combines ordinary language modeling with serialized repairs derived from random corruptions, model-generated edits and repeated text. Across model scales and editing baselines, CES models demonstrate complete applied edits with modestly higher clean-text bits per byte than clean autoregressive models. Supervised and reinforcement-learning post-training provide a grammatical-error-correction proof of concept, producing more beneficial than harmful changes under reference-blind model judging. Correct repair programs also improve subsequent text prediction while the original context and its cached states are retained. CES provides a common interface for generation and localized revision, with potential extensions to iterative refinement and additional pointer-addressed transformations.

Most robot policies, whether trained by imitation learning (IL) or reinforcement learning (RL), map observations to action values at discrete control steps and leave the continuity of physical motion to be learned implicitly. We propose ODE policy, which learns the dynamics of the action rather than the action itself. A neural ordinary differential equation (ODE) learns the vector field of the action by matching the integrated actions to the targets over short action chunks in IL and single control steps in RL. A lightweight diversity head captures multi-modal behavior by randomizing the direction of the field. At deployment, each action is integrated from the previous one, so the executed trajectory is continuous by construction. We evaluate it as a visuomotor policy, as the action head of vision-language-action (VLA) and world action models (WAMs), and as the actor of model-based RL against 14 baselines on unimanual, bimanual, dexterous, locomotion, and loco-manipulation tasks. In IL, against flow matching, it reaches 5.9times the success, 5.4times the generalization, and 3.9times the mode balance after one epoch, and generates actions 10.8times faster. It mostly moves more smoothly than human demonstrations. On 14 real-world tasks across single-arm, dual-arm, dexterous, and humanoid robots, it achieves the highest success rate. In RL, it further speeds up SuperMimic for humanoid motion tracking and smooths its actions. Efficient in learning, data, parameters, and execution, ODE policy offers a promising path to scaling robot learning.

Vision-Language Models (VLMs) excel at 2D tasks such as grounding and captioning, yet remain limited in 3D understanding. A key limitation is their text-only supervision paradigm, which under-constrains fine-grained visual perception and prevents the recovery of dense geometry. Prior methods either distill geometry from external vision models, introducing error accumulation, or enable direct prediction with inefficient per-pixel query or coarse token-level outputs. In this paper, we propose DepthVLM, a simple yet effective framework that transforms a single VLM into a native dense geometry predictor while preserving its multimodal capability. By attaching a lightweight depth head to the LLM backbone and training under a unified vision-text supervision paradigm with a two-stage schedule, DepthVLM generates full-resolution depth maps alongside language outputs in a single forward pass. We further introduce a unified indoor-outdoor metric depth benchmark in a VLM-compatible format. Experiments show that DepthVLM significantly outperforms existing VLMs with higher inference efficiency, surpasses leading pure vision models, and improves complex 3D spatial reasoning, moving toward a truly unified foundation model. All code and checkpoints will be publicly released.

Video diffusion transformers have achieved state-of-the-art visual quality, but their high inference cost remains a major bottleneck for real-time applications. Recent distillation frameworks produce autoregressive video diffusion models with reduced latency, yet these models still use a fixed number of denoising steps per frame, wasting computation on predictable frames and under-refining challenging ones. We present DSA, a confidence-guided adaptive computation framework for AR video diffusion. DSA introduces a lightweight confidence head, trained jointly with the generator under a distribution-matching distillation objective, to estimate per-frame denoising reliability. At inference, this confidence signal dynamically adjusts the number of diffusion steps: simple frames terminate early for speed, while complex frames receive additional refinement. Our method requires no extra video data, no heuristics, and little architectural modification. Experiments show that DSA achieves real-time autoregressive video generation, reaching 22.63 FPS with sub-second latency on H100 GPUs, while maintaining competitive or superior VBench quality compared to recent autoregressive and bidirectional video diffusion models. Our results demonstrate that confidence-guided adaptive sampling provides an effective and practical path toward interactive video generation.

Despite strong zero-shot performance, SAM is unreliable under domain shift due to Mask-level Confidence Confusion (MCC), where a single IoU-based mask score fails to reflect pixel-wise reliability near boundaries. Motivated by the contrast between texture-biased shortcuts in neural networks and shape-centric processing in human vision, we model out-of-domain variation as appearance shifts and non-rigid deformations that jointly stress calibration. We propose Segment Anything with Robust Uncertainty-Accuracy Correlation (RUAC) for robust pixel-wise uncertainty estimation under appearance and deformation shifts. RUAC adds a lightweight uncertainty head, trains it with a collaborative style-deformation attack that jointly perturbs texture and geometry, and applies Uncertainty-Accuracy Alignment to ensure uncertainty consistently highlights erroneous pixels even under adversarial perturbations. Across 23 zero-shot domains, RUAC improves segmentation quality and yields more faithful uncertainty with stronger uncertainty-accuracy correlation. Project page: https://hongyouzhou.github.io/ruac/.

Locating a specific object instance in a cluttered scene using a single reference image and a short description, and reporting when that instance is absent, large vision-language models usually address this task. We ask whether the same capability is available far more cheaply, from representations already learned by a world-model pretraining objective. We present WALDO, a one-shot exemplar- and language-conditioned detection head with 3.4M trainable parameters that reads frozen V-JEPA 2.1 features to jointly predict object localization and target presence, with no gradient on the backbone. Because exemplar-conditioned supervision is scarce, we synthesize training episodes from instance annotations, mining exemplars from ground-truth boxes and constructing absence cases that exclude the referenced instance while leaving same-category distractors in view. This is easy to get wrong: in the obvious implementation, crop size alone predicts the label, and a head trained on it reaches 0.9998 absence AUROC without ever consulting the exemplar, and we report the negative controls that close the shortcut. On 35 held-out cluttered scenes, WALDO achieves a 0.461 catalogue AP@50, compared to 0.306 for a prompted Grounding DINO baseline under an identical scorer. Substituting DINOv3 for V-JEPA under a matched 576-token grid drops within-category absence AUROC from 0.880 to 0.726 and instance AP@50 from 0.201 to 0.141, isolating the pretraining objective rather than input resolution as the source of the gain. Instance-level Success@1, however, reaches only 0.190 against a 0.190 category-chance floor: world-model features transfer to localization precision and absence detection but not to instance identity.

Vision transformers (ViT) usually extract features via forwarding all the tokens in the self-attention layers from top to toe. In this paper, we introduce dynamic token-pass vision transformers (DoViT) for semantic segmentation, which can adaptively reduce the inference cost for images with different complexity. DoViT gradually stops partial easy tokens from self-attention calculation and keeps the hard tokens forwarding until meeting the stopping criteria. We employ lightweight auxiliary heads to make the token-pass decision and divide the tokens into keeping/stopping parts. With a token separate calculation, the self-attention layers are speeded up with sparse tokens and still work friendly with hardware. A token reconstruction module is built to collect and reset the grouped tokens to their original position in the sequence, which is necessary to predict correct semantic masks. We conduct extensive experiments on two common semantic segmentation tasks, and demonstrate that our method greatly reduces about 40% sim 60% FLOPs and the drop of mIoU is within 0.8% for various segmentation transformers. The throughput and inference speed of ViT-L/B are increased to more than 2times on Cityscapes.

Diffusion transformers have demonstrated remarkable generative capabilities, yet the rich perceptual representations computed across their denoising trajectory are discarded once the content is rendered. We present MMDiff, a framework that transforms a frozen diffusion transformer into a multi-modal generative system that jointly produces images alongside any combination of dense perceptual modalities using lightweight decoder heads. Our central finding is that perceptual information is temporally distributed along the denoising trajectory, and that multi-timestep feature fusion with spatially varying aggregation weights is essential, improving semantic segmentation results by up to 28.7% mIoU over single-timestep extraction. We further adopt concept-driven attention extraction for interpretable spatial guidance, and show that frozen diffusion features are competitive with and complementary to state-of-the-art encoders such as DINOv3. By training only lightweight decoder heads on a frozen backbone, we achieve strong performance in semantic segmentation, salient object detection, and depth estimation, and demonstrate that this framework enables effective synthetic data generation at scale.

Pixel-space diffusion models aim to learn an end-to-end generator directly over raw pixels. This is challenging because a single model must capture both global structure and local texture in the same high-dimensional space. While recent work improves pixel diffusion through alternative prediction targets, training objectives, and architectures, these advances typically require training a new model from scratch. We show there is a cheaper, complementary strategy: a frozen, pretrained pixel diffusion model can guide itself. Our key observation is that intermediate layers of a pretrained pixel diffusion transformer can be decoded into coarse predictions that capture the main low-frequency structure, while the final layers progressively refine local, high-frequency details. We therefore attach a lightweight prediction head to an intermediate layer, keep the backbone frozen, and use the discrepancy between the intermediate and final predictions as a self-guidance direction during sampling. To train this head, we further find that real images are not necessary. Instead, model-generated samples suffice and even outperform real images for training the head, especially in enhancing the high-frequency components that pixel diffusion tends to underfit. Across multiple pixel diffusion models on ImageNet, our Synthetic Self-Guidance (SSG) consistently improves generation while adapter training requires less than 1% of full-model training compute: it reduces FID by over 50% across the evaluated JiT variants without classifier-free guidance (CFG) and further improves strong baselines with CFG, e.g., JiT-H/16 from 1.86 to 1.67 and PixelREPA-H/16 from 1.81 to 1.59. Our code is available at https://github.com/zfu006/SSG.

In this paper, we introduce an improved approach of speculative decoding aimed at enhancing the efficiency of serving large language models. Our method capitalizes on the strengths of two established techniques: the classic two-model speculative decoding approach, and the more recent single-model approach, Medusa. Drawing inspiration from Medusa, our approach adopts a single-model strategy for speculative decoding. However, our method distinguishes itself by employing a single, lightweight draft head with a recurrent dependency design, akin in essence to the small, draft model uses in classic speculative decoding, but without the complexities of the full transformer architecture. And because of the recurrent dependency, we can use beam search to swiftly filter out undesired candidates with the draft head. The outcome is a method that combines the simplicity of single-model design and avoids the need to create a data-dependent tree attention structure only for inference in Medusa. We empirically demonstrate the effectiveness of the proposed method on several popular open source language models, along with a comprehensive analysis of the trade-offs involved in adopting this approach.

Reasoning and agentic workloads increasingly demand efficient long-context inference. Yet full-attention decoding reads the growing history at every step, although the benefit of global access varies across prediction positions. We find that, before global attention is computed for the current step, the decoding states available after local computation in frozen pretrained models already contain information predictive of its benefit over local attention. Building on this finding, we introduce On-Demand Attention (ODA), a local-first decoding method: after local computation, a lightweight recall head decides whether to recompute the current step with global attention. ODA trains only the recall head with modest data and compute budgets, leaving pretrained weights unchanged and retaining the complete historical KV cache so that information skipped at one step remains available for later access. Experiments across model scales and families, including hybrid attention backbones, show that ODA recovers most of the performance lost under local attention while substantially reducing the frequency of global attention. Controlled long-context measurements in vLLM further show that GPU-side conditional execution translates fewer global reads into practical decoding speedups over full attention. These findings show that pretrained decoding states can support both token prediction and decisions about accessing distant information, allowing models to allocate global computation as needed during decoding.

Brain MRI underpins a wide range of neuroscientific and clinical applications, yet most learning-based methods remain task-specific and require substantial labeled data. Here we show that a single self-supervised representation can generalize across heterogeneous brain MRI endpoints. We trained BrainDINO, a self-distilled foundation model, on approximately 6.6 million unlabeled axial slices from 20 datasets encompassing broad variation in population, disease, and acquisition setting. Using a frozen encoder with lightweight task heads, BrainDINO supported transfer across tumor segmentation, neurodegenerative and neurodevelopmental conditions classification, brain age estimation, post-stroke temporal prediction, molecular status prediction, MRI sequence classification, and survival modeling. Across tasks and supervision regimes, BrainDINO consistently equaled or exceeded natural-image and MRI-specific self-supervised baselines, with particularly strong advantages under label scarcity. Representation analyses further showed anatomically organized and pathology-sensitive feature structure in the absence of task-specific supervision. Our findings indicate that large-scale slice-wise self-supervised learning can yield a unified brain MRI representation that supports diverse neuroimaging tasks without volumetric pretraining or full-network fine-tuning, establishing a scalable foundation for robust and data-efficient brain imaging analysis.

Accurately recovering the full 9-DoF pose of unseen instances within specific categories from a single RGB image remains a core challenge for robotics and automation. Most existing solutions still rely on pseudo-depth, CAD models, or multi-stage cascades that separate 2D detection from pose estimation. Motivated by the need for a simpler, RGB-only alternative that learns directly at the category level, we revisit a longstanding question: Can object detection and 9-DoF pose estimation be unified with high performance, without any additional data? We show that they can with our method, YOPO, a single-stage, query-based framework that treats category-level 9-DoF estimation as a natural extension of 2D detection. YOPO augments a transformer detector with a lightweight pose head, a bounding-box-conditioned translation module, and a 6D-aware Hungarian matching cost. The model is trained end-to-end only with RGB images and category-level pose labels. Despite its minimalist design, YOPO sets a new state of the art on three benchmarks. On the REAL275 dataset, it achieves 79.6% IoU_{50} and 54.1% under the 10^circ10{cm} metric, surpassing prior RGB-only methods and closing much of the gap to RGB-D systems. The code, models, and additional qualitative results can be found on our project.

Object detectors achieve strong performance under nominal imaging conditions but can fail silently when exposed to blur, noise, compression, adverse weather, or resolution changes. In safety-critical settings, it is therefore insufficient to produce predictions without assessing whether the input remains within the detector's nominal operating regime. We refer to this capability as self-aware object detection. We introduce a degradation-aware self-awareness framework based on degradation manifolds, which explicitly structure a detector's feature space according to image degradation rather than semantic content. Our method augments a standard detection backbone with a lightweight embedding head trained via multi-layer contrastive learning. Images sharing the same degradation composition are pulled together, while differing degradation configurations are pushed apart, yielding a geometrically organized representation that captures degradation type and severity without requiring degradation labels or explicit density modeling. To anchor the learned geometry, we estimate a pristine prototype from clean training embeddings, defining a nominal operating point in representation space. Self-awareness emerges as geometric deviation from this reference, providing an intrinsic, image-level signal of degradation-induced shift that is independent of detection confidence. Extensive experiments on synthetic corruption benchmarks, cross-dataset zero-shot transfer, and natural weather-induced distribution shifts demonstrate strong pristine-degraded separability, consistent behavior across multiple detector architectures, and robust generalization under semantic shift. These results suggest that degradation-aware representation geometry provides a practical and detector-agnostic foundation.

Transformer-based real-time object detectors achieve strong accuracy-latency trade-offs, and D-FINE is among the top-performing recent architectures. However, real-time instance segmentation with transformers is still less common. We present D-FINE-seg, an instance segmentation extension of D-FINE that adds: a lightweight mask head, segmentation-aware training, including box cropped BCE and dice mask losses, auxiliary and denoising mask supervision, and adapted Hungarian matching cost. On the TACO dataset, D-FINE-seg improves F1-score over Ultralytics YOLO26 under a unified TensorRT FP16 end-to-end benchmarking protocol, while maintaining competitive latency. Second contribution is an end-to-end pipeline for training, exporting, and optimized inference across ONNX, TensorRT, OpenVINO for both object detection and instance segmentation tasks. This framework is released as open-source under the Apache-2.0 license. GitHub repository - https://github.com/ArgoHA/D-FINE-seg.

Sound source distance estimation (SDE) is a critical capability in human-robot interaction. An inappropriate interaction distance not only reduces the reliability of speech acquisition and understanding, but also compromises the naturalness and comfort of the interaction. Most existing SDE methods rely on microphone arrays, however, multi-microphone systems typically require careful hardware synchronization, geometric calibration, and additional space and computational resources, which limits applicability to size-constrained and computability-limited embodied platforms. To alleviate these issues, we propose Fast-SDE, a lightweight single-microphone SDE framework that is suited for deployment on robot platforms with limited computational resources and strict size constraints. Specifically, Fast-SDE employs a subband-based backbone that decomposes the frequency axis into multiple subbands, rather than processing the entire spectrum with a wide full-band backbone. A shared subband encoder then maps each subband to a compact latent representation and learns the relationship between acoustic structure and time-frequency patterns. Finally, a lightweight regression head converts the fused subband representations into the estimated distance. Extensive simulation and real-world experiments demonstrate the merits of the proposed method. To benefit the broader research community, we have open-sourced our code at https://github.com/JiangWAV/FAST-SDE.

Imitation learning for robotic grasping is often plagued by the multimodal problem: when a scene contains multiple valid targets, demonstrations of grasping different objects create conflicting training signals. Standard imitation learning policies fail by averaging these distinct actions into a single, invalid action. In this paper, we introduce SAM2Grasp, a novel framework that resolves this issue by reformulating the task as a uni-modal, prompt-conditioned prediction problem. Our method leverages the frozen SAM2 model to use its powerful visual temporal tracking capability and introduces a lightweight, trainable action head that operates in parallel with its native segmentation head. This design allows for training only the small action head on pre-computed temporal-visual features from SAM2. During inference, an initial prompt, such as a bounding box provided by an upstream object detection model, designates the specific object to be grasped. This prompt conditions the action head to predict a unique, unambiguous grasp trajectory for that object alone. In all subsequent video frames, SAM2's built-in temporal tracking capability automatically maintains stable tracking of the selected object, enabling our model to continuously predict the grasp trajectory from the video stream without further external guidance. This temporal-prompted approach effectively eliminates ambiguity from the visuomotor policy. We demonstrate through extensive experiments that SAM2Grasp achieves state-of-the-art performance in cluttered, multi-object grasping tasks.

Reasoning-enabled language model agents can incur substantial computation before acting, although the reasoning needed varies across decisions. Existing stopping signals, such as confidence and intermediate-answer stability, can vary in effectiveness across reasoning models; signals obtained from hidden states or token probabilities also require internal access that may be unavailable or impractical. We introduce StreamStop, which learns model-specific stopping policies offline from prefix-level action agreement. A frozen prefix reader encodes available reasoning text for a lightweight stop head, allowing stopping without access to the reasoning model's internal signals. We construct and publicly release a dataset of agent reasoning trajectories with prefix-level action annotations. These annotations compare each prefix action with the full-reasoning reference action, enabling offline comparison of stopping rules and exact expected-return optimization of a discounted action-agreement objective. Conditioning the head on the discount factor allows the agreement-token trade-off to be adjusted at inference without retraining. In closed-loop evaluations on WebShop and ScienceWorld, StreamStop achieves higher observed success than most validation-selected fixed-budget settings while using fewer reasoning tokens than Full thinking. On WebShop with Qwen3.8-27B, it uses 42% fewer reasoning tokens per episode with similar observed task success.

Multimodal Large Language Models (MLLMs) have recently achieved remarkable success in visual-language understanding, demonstrating superior high-level semantic alignment within their vision encoders. An important question thus arises: Can these encoders serve as versatile vision backbones, capable of reliably performing classic vision-centric tasks as well? To address the question, we make the following contributions: (i) we identify that the vision encoders within MLLMs exhibit deficiencies in their dense feature representations, as evidenced by their suboptimal performance on dense prediction tasks (e.g., semantic segmentation, depth estimation); (ii) we propose VersaViT, a well-rounded vision transformer that instantiates a novel multi-task framework for collaborative post-training. This framework facilitates the optimization of the vision backbone via lightweight task heads with multi-granularity supervision; (iii) extensive experiments across various downstream tasks demonstrate the effectiveness of our method, yielding a versatile vision backbone suited for both language-mediated reasoning and pixel-level understanding.

Reinforcement Learning with Verifiable Rewards (RLVR) has significantly advanced the reasoning capabilities of Large Language Models (LLMs). However, methods such as GRPO and DAPO suffer from substantial computational cost, since they rely on sampling many rollouts for each prompt. Moreover, in RLVR the relative advantage is often sparse: many samples become nearly all-correct or all-incorrect, yielding low within-group reward variance and thus weak learning signals. In this paper, we introduce arrol (Accelerating RLVR via online Rollout Pruning), an online rollout pruning method that prunes rollouts during generation while explicitly steering the surviving ones more correctness-balanced to enhance learning signals. Specifically, arrol trains a lightweight quality head on-the-fly to predict the success probability of partial rollouts and uses it to make early pruning decisions. The learned quality head can further weigh candidates to improve inference accuracy during test-time scaling. To improve efficiency, we present a system design that prunes rollouts inside the inference engine and re-batches the remaining ones for log-probability computation and policy updates. Across GRPO and DAPO on Qwen-3 and LLaMA-3.2 models (1B-8B), arrol improves average accuracy by +2.30 to +2.99 while achieving up to 1.7x training speedup, and yielding up to +8.33 additional gains in average accuracy in test-time scaling. The code is available at https://github.com/Hsu1023/ARRoL.

Reliable uncertainty estimation is critical for medical image segmentation, where automated contours feed downstream quantification and clinical decision support. Many strong uncertainty methods require repeated inference, while efficient single-forward-pass alternatives often provide weaker failure ranking or rely on restrictive feature-space assumptions. We present SegWithU, a post-hoc framework that augments a frozen pretrained segmentation backbone with a lightweight uncertainty head. SegWithU taps intermediate backbone features and models uncertainty as perturbation energy in a compact probe space using rank-1 posterior probes. It produces two voxel-wise uncertainty maps: a calibration-oriented map for probability tempering and a ranking-oriented map for error detection and selective prediction. Across ACDC, BraTS2024, and LiTS, SegWithU is the strongest and most consistent single-forward-pass baseline, achieving AUROC/AURC of 0.9838/2.4885, 0.9946/0.2660, and 0.9925/0.8193, respectively, while preserving segmentation quality. These results suggest that perturbation-based uncertainty modeling is an effective and practical route to reliability-aware medical segmentation. Source code is available at https://github.com/ProjectNeura/SegWithU.

Self-supervised learning (SSL) has proven vital for advancing research in natural language processing (NLP) and computer vision (CV). The paradigm pretrains a shared model on large volumes of unlabeled data and achieves state-of-the-art (SOTA) for various tasks with minimal adaptation. However, the speech processing community lacks a similar setup to systematically explore the paradigm. To bridge this gap, we introduce Speech processing Universal PERformance Benchmark (SUPERB). SUPERB is a leaderboard to benchmark the performance of a shared model across a wide range of speech processing tasks with minimal architecture changes and labeled data. Among multiple usages of the shared model, we especially focus on extracting the representation learned from SSL due to its preferable re-usability. We present a simple framework to solve SUPERB tasks by learning task-specialized lightweight prediction heads on top of the frozen shared model. Our results demonstrate that the framework is promising as SSL representations show competitive generalizability and accessibility across SUPERB tasks. We release SUPERB as a challenge with a leaderboard and a benchmark toolkit to fuel the research in representation learning and general speech processing.

Speculative decoding (SPD) aims to accelerate the auto-regressive token generation process of a target Large Language Model (LLM). Some approaches employ a draft model with multiple heads to predict a sequence of future tokens, where each head handles a token in the sequence. The target LLM verifies the predicted sequence and accepts aligned tokens, enabling efficient multi-token generation. However, existing methods assume that all tokens within a sequence are equally important, employing identical head structures and relying on a single-generation paradigm, either serial or parallel. To this end, we theoretically demonstrate that initial tokens in the draft sequence are more important than later ones. Building on this insight, we propose Gumiho, a hybrid model combining serial and parallel heads. Specifically, given the critical importance of early tokens, we employ a sophisticated Transformer architecture for the early draft heads in a serial configuration to improve accuracy. For later tokens, we utilize multiple lightweight MLP heads operating in parallel to enhance efficiency. By allocating more advanced model structures and longer running times to the early heads, Gumiho achieves improved overall performance. The experimental results demonstrate that our method outperforms existing approaches, fully validating its effectiveness.

LiDAR point clouds are fundamental to various applications, yet the extreme sparsity of high-precision geometric details hinders efficient context modeling, thereby limiting the compression speed and performance of existing methods. To address this challenge, we propose a compact representation for efficient predictive lossless coding. Our framework comprises two lightweight modules. First, the Geometry Re-Densification Module iteratively densifies encoded sparse geometry, extracts features at a dense scale, and then sparsifies the features for predictive coding. This module avoids costly computation on highly sparse details while maintaining a lightweight prediction head. Second, the Cross-scale Feature Propagation Module leverages occupancy cues from multiple resolution levels to guide hierarchical feature propagation, enabling information sharing across scales and reducing redundant feature extraction. Additionally, we introduce an integer-only inference pipeline to enable bit-exact cross-platform consistency, which avoids the entropy-coding collapse observed in existing neural compression methods and further accelerates coding. Experiments demonstrate competitive compression performance at real-time speed. Code will be released upon acceptance. Code is available at https://github.com/pengpeng-yu/FastPCC.

The transformer model has gained widespread adoption in computer vision tasks in recent times. However, due to the quadratic time and memory complexity of self-attention, which is proportional to the number of input tokens, most existing Vision Transformers (ViTs) encounter challenges in achieving efficient performance in practical industrial deployment scenarios, such as TensorRT and CoreML, where traditional CNNs excel. Although some recent attempts have been made to design CNN-Transformer hybrid architectures to tackle this problem, their overall performance has not met expectations. To tackle these challenges, we propose an efficient hybrid ViT architecture named FMViT. This approach enhances the model's expressive power by blending high-frequency features and low-frequency features with varying frequencies, enabling it to capture both local and global information effectively. Additionally, we introduce deploy-friendly mechanisms such as Convolutional Multigroup Reparameterization (gMLP), Lightweight Multi-head Self-Attention (RLMHSA), and Convolutional Fusion Block (CFB) to further improve the model's performance and reduce computational overhead. Our experiments demonstrate that FMViT surpasses existing CNNs, ViTs, and CNNTransformer hybrid architectures in terms of latency/accuracy trade-offs for various vision tasks. On the TensorRT platform, FMViT outperforms Resnet101 by 2.5% (83.3% vs. 80.8%) in top-1 accuracy on the ImageNet dataset while maintaining similar inference latency. Moreover, FMViT achieves comparable performance with EfficientNet-B5, but with a 43% improvement in inference speed. On CoreML, FMViT outperforms MobileOne by 2.6% in top-1 accuracy on the ImageNet dataset, with inference latency comparable to MobileOne (78.5% vs. 75.9%). Our code can be found at https://github.com/tany0699/FMViT.

Unified Multimodal Models (UMMs) have demonstrated remarkable performance in text-to-image generation (T2I) and editing (TI2I), whether instantiated as assembled unified frameworks which couple powerful vision-language model (VLM) with diffusion-based generator, or as naive Unified Multimodal Models with an early fusion of understanding and generation modalities. We contend that in current unified frameworks, the crucial capability of multimodal generative reasoning which encompasses instruction understanding, grounding, and image referring for identity preservation and faithful reconstruction, is intrinsically entangled with high-fidelity synthesis. In this work, we introduce Query-Kontext, a novel approach that bridges the VLM and diffusion model via a multimodal ``kontext'' composed of semantic cues and coarse-grained image conditions encoded from multimodal inputs. This design delegates the complex ability of multimodal generative reasoning to powerful VLM while reserving diffusion model's role for high-quality visual synthesis. To achieve this, we propose a three-stage progressive training strategy. First, we connect the VLM to a lightweight diffusion head via multimodal kontext tokens to unleash the VLM's generative reasoning ability. Second, we scale this head to a large, pre-trained diffusion model to enhance visual detail and realism. Finally, we introduce a low-level image encoder to improve image fidelity and perform instruction tuning on downstream tasks. Furthermore, we build a comprehensive data pipeline integrating real, synthetic, and open-source datasets, covering diverse multimodal reference-to-image scenarios, including image generation, instruction-driven editing, customized generation, and multi-subject composition. Experiments show that our approach matches strong unified baselines and even outperforms task-specific state-of-the-art methods in several cases.

In this paper, we point out that the objective of the retrieval algorithms is to align with the LLM, which is similar to the objective of knowledge distillation in LLMs. We analyze the similarity in information focus between the distilled language model(DLM) and the original LLM from the perspective of information theory, and thus propose a novel paradigm that leverages a DLM as the retrieval algorithm. Based on the insight, we present SpeContext, an algorithm and system co-design for long-context reasoning. (1) At the algorithm level, SpeContext proposes lightweight retrieval head based on the head-level attention weights of DLM, achieving > 90% parameters reduction by pruning the redundancy. (2) At the system level, SpeContext designs an asynchronous prefetch dataflow via the elastic loading strategy, effectively overlapping KV cache retrieval with the LLM computation. (3) At the compilation level, SpeContext constructs the theoretical memory model and implements an adaptive memory management system to achieve acceleration by maximizing GPU memory utilization. We deploy and evaluate SpeContext in two resourceconstrained environments, cloud and edge. Extensive experiments show that, compared with the Huggingface framework, SpeContext achieves up to 24.89x throughput improvement in cloud and 10.06x speedup in edge with negligible accuracy loss, pushing the Pareto frontier of accuracy and throughput.

Recent Omni-multimodal Large Language Models show promise in unified audio, vision, and text modeling. However, streaming audio-video understanding remains challenging, as existing approaches suffer from disjointed capabilities: they typically exhibit incomplete modality support or lack autonomous proactive monitoring. To address this, we present ROMA, a real-time omni-multimodal assistant for unified reactive and proactive interaction. ROMA processes continuous inputs as synchronized multimodal units, aligning dense audio with discrete video frames to handle granularity mismatches. For online decision-making, we introduce a lightweight speak head that decouples response initiation from generation to ensure precise triggering without task conflict. We train ROMA with a curated streaming dataset and a two-stage curriculum that progressively optimizes for streaming format adaptation and proactive responsiveness. To standardize the fragmented evaluation landscape, we reorganize diverse benchmarks into a unified suite covering both proactive (alert, narration) and reactive (QA) settings. Extensive experiments across 12 benchmarks demonstrate ROMA achieves state-of-the-art performance on proactive tasks while competitive in reactive settings, validating its robustness in unified real-time omni-multimodal understanding.

Can representations learned for image generation also support the evaluation of generated images? We study text-to-image reward prediction as a downstream task of generative representation learning. To this end, we introduce DiT-Reward, which converts a pretrained text-to-image Diffusion Transformer into a reward model by processing near-clean image latents and aggregating text-conditioned image representations across transformer layers. Under the same training data mixture as HPSv3, DiT-Reward outperforms HPSv3 on all four evaluated preference benchmarks, reaching 85.6% on HPDv2 and 77.6% on HPDv3. When the generative backbone is frozen, a lightweight learned head can still extract meaningful preference predictions from its representations. Probing across depth further reveals that downstream reward performance is strongest in the middle-to-late layers and benefits from combining representations across different stages. We also observe consistent positive scaling with generative backbone capacity. Finally, when used to optimize Stable Diffusion 3.5 Large with Flow-GRPO, DiT-Reward outperforms HPSv3 along the matched training trajectory, with particularly clear gains in realism. Direct latent scoring also achieves a 1.65x inference speedup over HPSv3 with comparable peak memory. These results show that pretrained generative DiTs provide transferable representations for reward modeling and policy optimization.

Effective robotic manipulation relies on a precise understanding of 3D scene geometry, and one of the most straightforward ways to acquire such geometry is through multi-view observations. Motivated by this, we present GP3 -- a 3D geometry-aware robotic manipulation policy that leverages multi-view input. GP3 employs a spatial encoder to infer dense spatial features from RGB observations, which enable the estimation of depth and camera parameters, leading to a compact yet expressive 3D scene representation tailored for manipulation. This representation is fused with language instructions and translated into continuous actions via a lightweight policy head. Comprehensive experiments demonstrate that GP3 consistently outperforms state-of-the-art methods on simulated benchmarks. Furthermore, GP3 transfers effectively to real-world robots without depth sensors or pre-mapped environments, requiring only minimal fine-tuning. These results highlight GP3 as a practical, sensor-agnostic solution for geometry-aware robotic manipulation.

Speech Emotion Recognition (SER) in low-resource languages remains a challenging problem due to limited labeled data. In this work, we study the use of Whisper for Persian SER with a particular focus on representation dimensionality reduction and language-specific model adaptation. We propose a SER framework in which frame-level embeddings extracted from the Whisper encoder are reduced in dimensionality using PCA, eliminating the need for learned projection layers and substantially reducing the number of trainable parameters. The reduced representations are aggregated using an attention-based pooling mechanism and classified with a lightweight prediction head. In addition, we investigate whether fine-tuning Whisper on a Persian automatic speech recognition (ASR) task improves downstream SER performance. Experiments conducted on the ShEMO dataset under a speaker-independent evaluation protocol show that PCA-based dimensionality reduction consistently improves emotion recognition performance while reducing training latency and memory usage. ASR fine-tuning yields only modest gains for SER, suggesting limited transfer from language adaptation to emotion-related representations under the evaluated conditions. These findings provide practical insights into the efficient use of large pretrained speech models for emotion recognition in low-resource languages.

Unified vision-language frameworks have greatly advanced in recent years, most of which adopt an encoder-decoder architecture to unify image-text tasks as sequence-to-sequence generation. However, existing video-language (VidL) models still require task-specific designs in model architecture and training objectives for each task. In this work, we explore a unified VidL framework LAVENDER, where Masked Language Modeling (MLM) is used as the common interface for all pre-training and downstream tasks. Such unification leads to a simplified model architecture, where only a lightweight MLM head, instead of a decoder with much more parameters, is needed on top of the multimodal encoder. Surprisingly, experimental results show that this unified framework achieves competitive performance on 14 VidL benchmarks, covering video question answering, text-to-video retrieval and video captioning. Extensive analyses further demonstrate the advantage of LAVENDER over existing VidL methods in: (i) supporting all downstream tasks with just a single set of parameter values when multi-task finetuned; (ii) few-shot generalization on various downstream tasks; and (iii) enabling zero-shot evaluation on video question answering tasks. Code is available at https://github.com/microsoft/LAVENDER.

This paper introduces FaceLiVT, a lightweight yet powerful face recognition model that integrates a hybrid Convolution Neural Network (CNN)-Transformer architecture with an innovative and lightweight Multi-Head Linear Attention (MHLA) mechanism. By combining MHLA alongside a reparameterized token mixer, FaceLiVT effectively reduces computational complexity while preserving competitive accuracy. Extensive evaluations on challenging benchmarks; including LFW, CFP-FP, AgeDB-30, IJB-B, and IJB-C; highlight its superior performance compared to state-of-the-art lightweight models. MHLA notably improves inference speed, allowing FaceLiVT to deliver high accuracy with lower latency on mobile devices. Specifically, FaceLiVT is 8.6 faster than EdgeFace, a recent hybrid CNN-Transformer model optimized for edge devices, and 21.2 faster than a pure ViT-Based model. With its balanced design, FaceLiVT offers an efficient and practical solution for real-time face recognition on resource-constrained platforms.

Vision-Language-Action (VLA) models have emerged as a promising paradigm for general-purpose robotic manipulation, leveraging large-scale pre-training to achieve strong performance. The field has rapidly evolved with additional spatial priors and diverse architectural innovations. However, these advancements are often accompanied by varying training recipes and implementation details, which can make it challenging to disentangle the precise source of empirical gains. In this work, we introduce SimVLA, a streamlined baseline designed to establish a transparent reference point for VLA research. By strictly decoupling perception from control, using a standard vision-language backbone and a lightweight action head, and standardizing critical training dynamics, we demonstrate that a minimal design can achieve state-of-the-art performance. Despite having only 0.5B parameters, SimVLA outperforms multi-billion-parameter models on standard simulation benchmarks without robot pretraining. SimVLA also reaches on-par real-robot performance compared to pi0.5. Our results establish SimVLA as a robust, reproducible baseline that enables clear attribution of empirical gains to future architectural innovations. Website: https://frontierrobo.github.io/SimVLA

Large-scale autoregressive models have demonstrated remarkable capabilities in image generation. However, their sequential raster-scan decoding relies on strictly next-token prediction, making inference prohibitively expensive. Existing acceleration methods typically either introduce entirely new generation paradigms that necessitate costly pre-training from scratch, or enable parallel generation at the expense of a training-inference gap or altered prediction objectives. In this paper, we introduce FlashAR, a lightweight post-training adaptation framework that efficiently adapts a pre-trained raster-scan autoregressive model into a highly parallel generator based on two-way next-token prediction. Our key insight is that effective adaptation should minimize modifications to the pre-trained model's original training objective to preserve its learned prior. Accordingly, we retain the original AR head as a horizontal head for row-wise prediction and introduce a complementary, lightweight vertical head for column-wise prediction. To facilitate efficient adaptation, we branch the vertical head from an intermediate layer rather than the final layer, bypassing the inherent horizontal head bias. Moreover, since horizontal and vertical predictions capture complementary dependencies whose relative importance varies across target positions, we employ a learnable fusion gate to dynamically combine the two predictions at each position. To further reduce adaptation cost, we propose a two-stage adaptation pipeline: the vertical head is first initialized through adaptation from the pre-trained autoregressive model before jointly fine-tuned with backbone to adapt to the new decoding paradigm. Extensive experiments on LlamaGen and Emu3.5 show that FlashAR achieves up to a 22.9x speedup for 512x512 image generation through a lightweight post-training with merely 0.05% of the original training data.

Large language models solve complex problems by generating lengthy chains of explicit reasoning tokens. While effective, this makes reasoning expensive, length-sensitive, and constrained to (discrete) natural language. While latent reasoning offers a continuous alternative, determining useful structures for intermediate latent states is an open challenge. In this paper, we formulate latent reasoning as a geometric path-approximation problem within the model's pretrained token-embedding space. We introduce Geometric Latent Reasoning (GLR), which uses a lightweight transition head to predict iterative direction updates in embedding space. Using textual chain-of-thought traces as anchors, GLR learns to approximate discrete reasoning trajectories while permitting continuous deviations from exact token embeddings. Evaluations on mathematical reasoning benchmarks using Qwen3 models reveal an emergent phenomenon: geometric latent reasoning induces substantially shorter generations without an explicit length objective. By replacing early explicit reasoning with continuous latent steps, models often reach correct answers using substantially fewer total generation steps. These findings suggest that continuous trajectories act as compact intermediate reasoning states, exposing a new tradeoff between latent computation budget, output length, and accuracy.

Long chain-of-thought reasoning has made autoregressive decoding the dominant inference cost of modern large language models. Existing methods target either the input side (latent compression) or the output side (speculative decoding and multi-token prediction, MTP), but the two lines of work have been pursued independently. Moreover, output-side methods must incur an expensive verifier pass to validate the unreliable draft tokens predicted by MTP. To address these issues, we propose Pair-In, Pair-Out (PIPO), which unifies both sides by viewing a latent compressor and an MTP head as mirror-image operations: the compressor folds two input tokens into one latent representation, while the MTP head unfolds one hidden state into one additional output token. To remove the verifier cost without sacrificing reliability, PIPO trains a lightweight confidence head that decides whether draft tokens should be accepted. We observe that On-Policy Distillation (OPD) naturally matches the rejection-sampling criterion of speculative decoding, so the confidence head can be trained alongside OPD with negligible extra cost. Experiments on AIME 2025, GPQA-Diamond, LiveCodeBench v6, and LongBench v2 with Qwen3.5-4B and 9B backbones show that PIPO improves pass@4 over regular decoding by up to +7.15 points, while delivering up to 2.64times first-token-latency and 2.07times per-token-latency speedups. Project Page: GitHub.com/RedAI-Infra/PIPO.

Autoregressive decoding relies on the KV cache, whose memory footprint grows linearly with context length and caps batch size and throughput. Existing post-training methods exploit redundancy across tokens, layers, and feature dimensions, or lower numerical precision. We identify a complementary axis: within each attention head, values are largely predictable from their corresponding keys. We exploit this with value cache amortisation, which fits a lightweight per-head predictor at test time and stores residuals only for the tokens it reconstructs worst, giving 4times near-lossless value compression. The predictor can be initialised by meta-learning for substantially reduced prefill overhead, or fitted from scratch in settings that allow a one-off cost, such as multi-query inference. We pair value amortisation with cross-layer low-rank key compression to produce LowRAM, an asymmetric compression pipeline that stays close to lossless across three model families. By reconstructing only a selected subset of KV pairs at each decoding step, LowRAM can keep decoding overhead minimal and achieve up to 5times higher peak decode throughput at 4times compression. LowRAM further composes with quantisation and eviction, reaching 26.9times compression at 94.5% of baseline performance on long contexts. These results show that treating keys and values as structurally distinct enables efficient, aggressive, and composable KV cache compression.

A unified video and action model holds significant promise for robotics, where videos provide rich scene information for action prediction, and actions provide dynamics information for video prediction. However, effectively combining video generation and action prediction remains challenging, and current video generation-based methods struggle to match the performance of direct policy learning in action accuracy and inference speed. To bridge this gap, we introduce the Unified Video Action model (UVA), which jointly optimizes video and action predictions to achieve both high accuracy and efficient action inference. The key lies in learning a joint video-action latent representation and decoupling video-action decoding. The joint latent representation bridges the visual and action domains, effectively modeling the relationship between video and action sequences. Meanwhile, the decoupled decoding, powered by two lightweight diffusion heads, enables high-speed action inference by bypassing video generation during inference. Such a unified framework further enables versatile functionality through masked input training. By selectively masking actions or videos, a single model can tackle diverse tasks beyond policy learning, such as forward and inverse dynamics modeling and video generation. Via an extensive set of experiments, we demonstrate that UVA can serve as a general-purpose solution for a wide range of robotics tasks, such as policy learning, forward/inverse dynamics and video observation prediction, without compromising performance compared to methods tailored for specific applications. Results are best viewed on https://unified-video-action-model.github.io/.

We investigate how looped transformers encode human preference, training lightweight evaluator heads on frozen Ouro-2.6B loop-iteration states on Anthropic HH-RLHF. v2: an erratum is prepended; the original manuscript is unchanged. A post-publication audit found the three headline results inflated by two independent evaluation errors. The 95.2% pairwise evaluator accuracy is a canonical-ordering artifact: the data were correctly split, but the evaluator learned to prefer the first-presented argument; its strict antisymmetrized accuracy on the full 8,552-pair test set is 63.9%. The 84.5% pairwise probe and the below-chance 21.75% pointwise probe were source-item leaks (orientation rows and pair partners crossing the train/test split); corrected pair-disjoint values are 56.5% and 54.2% -- above chance, so the "inverted polarity" finding is withdrawn. The central finding survives at much smaller magnitude: preference is decoded more accurately relationally than pointwise (paired +2.3 points, 95% CI [+1.3, +3.3]), and the antisymmetrized evaluator still beats the linear probe, but no corrected readout rivals end-to-end reward models. The methodological findings stand (constant-output degeneracy, flip test, swap-protocol metric deflation), with one correction: antisymmetrized accuracy, not antisymmetry correlation, certifies relational discrimination. The two errors are mutually invisible -- a split audit cannot see an ordering prior, antisymmetrization cannot see a leak -- so both checks are required. Full audit in the follow-up work (Kirin, 2026, in preparation).

Multimodal Large Language Models (MLLMs) have made significant progress in bridging visual perception with high-level textual reasoning. However, they face a fundamental contradiction: while excelling at complex semantic understanding, these models often fail at basic visual tasks that require precise detail perception. This deficiency primarily stems from the prevalent architectural reliance on a single vision encoder optimized for high-level semantic alignment, which inherently sacrifices the ability to capture fine-grained visual information. To address this issue, we introduce Fusion to Enhance (FtZ), a novel vision tower framework. FtZ moves beyond the single-encoder design by innovatively composing a semantically powerful anchor encoder with a perception-rich augmenting encoder via a lightweight Multi-Head Cross-Attention mechanism. Experimental results demonstrate that on several challenging benchmarks demanding fine-grained visual understanding, such as TextVQA, POPE, MMMU, MME and MM-Vet, our FtZ model significantly outperforms baselines that use only a single encoder or existing feature fusion methods. This work proves that composing heterogeneous expert encoders is an efficient and effective path to overcoming the visual perception bottleneck in current MLLMs, offering a new design paradigm for building next-generation AI systems with stronger perceptual capabilities.

We present IronLLM-0.6B, a 654M-parameter language model designed for efficient on-device inference. IronLLM-0.6B combines a hybrid attention architecture with X-MTP, a lightweight shared-KV multi-token prediction design that eliminates per-depth KV-cache replay and employs a lightweight verification head for rollback-free drafting, achieving a 1.48x decoding speedup. The model is pretrained on approximately 6.2 trillion tokens using a quality-oriented data pipeline and is further post-trained with Multi-Domain On-Policy Distillation to integrate capabilities from domain-specialized teachers. To better meet the low-latency requirements of on-device scenarios, IronLLM-0.6B adopts an Instruct-Only design. Evaluations show that IronLLM-0.6B achieves competitive performance relative to larger models such as Qwen3.5-0.8B and MiniCPM5-1B, while producing more concise responses on many tasks. We further present IronLLM-0.6B-Light, which replaces RMSNorm with Dynamic Tanh and simplifies several computationally expensive components to improve inference and quantization efficiency. Together, the IronLLM models provide an effective performance-efficiency trade-off for resource-constrained deployment.

Autoregressive models have demonstrated remarkable success in sequential data generation, particularly in NLP, but their extension to continuous-domain image generation presents significant challenges. Recent work, the masked autoregressive model (MAR), bypasses quantization by modeling per-token distributions in continuous spaces using a diffusion head but suffers from slow inference due to the high computational cost of the iterative denoising process. To address this, we propose the Fast AutoRegressive model (FAR), a novel framework that replaces MAR's diffusion head with a lightweight shortcut head, enabling efficient few-step sampling while preserving autoregressive principles. Additionally, FAR seamlessly integrates with causal Transformers, extending them from discrete to continuous token generation without requiring architectural modifications. Experiments demonstrate that FAR achieves 2.3times faster inference than MAR while maintaining competitive FID and IS scores. This work establishes the first efficient autoregressive paradigm for high-fidelity continuous-space image generation, bridging the critical gap between quality and scalability in visual autoregressive modeling.

Recent progress in Multimodal Large Language Models (MLLMs) has unlocked powerful cross-modal reasoning abilities, but also raised new safety concerns, particularly when faced with adversarial multimodal inputs. To improve the safety of MLLMs during inference, we introduce a modular and adaptive inference-time intervention technology, AutoSteer, without requiring any fine-tuning of the underlying model. AutoSteer incorporates three core components: (1) a novel Safety Awareness Score (SAS) that automatically identifies the most safety-relevant distinctions among the model's internal layers; (2) an adaptive safety prober trained to estimate the likelihood of toxic outputs from intermediate representations; and (3) a lightweight Refusal Head that selectively intervenes to modulate generation when safety risks are detected. Experiments on LLaVA-OV and Chameleon across diverse safety-critical benchmarks demonstrate that AutoSteer significantly reduces the Attack Success Rate (ASR) for textual, visual, and cross-modal threats, while maintaining general abilities. These findings position AutoSteer as a practical, interpretable, and effective framework for safer deployment of multimodal AI systems.

Existing text-driven motion generation methods often treat synthesis as a bidirectional mapping between language and motion, but remain limited in capturing the causal logic of action execution and the human intentions that drive behavior. The absence of visual grounding further restricts precision and personalization, as language alone cannot specify fine-grained spatiotemporal details. We propose MoGIC, a unified framework that integrates intention modeling and visual priors into multimodal motion synthesis. By jointly optimizing multimodal-conditioned motion generation and intention prediction, MoGIC uncovers latent human goals, leverages visual priors to enhance generation, and exhibits versatile multimodal generative capability. We further introduce a mixture-of-attention mechanism with adaptive scope to enable effective local alignment between conditional tokens and motion subsequences. To support this paradigm, we curate Mo440H, a 440-hour benchmark from 21 high-quality motion datasets. Experiments show that after finetuning, MoGIC reduces FID by 38.6\% on HumanML3D and 34.6\% on Mo440H, surpasses LLM-based methods in motion captioning with a lightweight text head, and further enables intention prediction and vision-conditioned generation, advancing controllable motion synthesis and intention understanding. The code is available at https://github.com/JunyuShi02/MoGIC

Vision-language-action (VLA) models unify perception, language, and control for embodied agents but face significant challenges in practical deployment due to rapidly increasing compute and memory demands, especially as models scale to longer horizons and larger backbones. To address these bottlenecks, we introduce QuantVLA, a training-free post-training quantization (PTQ) framework that, to our knowledge, is the first PTQ approach for VLA systems and the first to successfully quantize a diffusion transformer (DiT) action head. QuantVLA incorporates three scale-calibrated components: (1) a selective quantization layout that integerizes all linear layers in both the language backbone and the DiT while keeping attention projections in floating point to preserve the original operator schedule; (2) attention temperature matching, a lightweight per-head scaling mechanism that stabilizes attention logits and is folded into the dequantization scales at inference; and (3) output head balancing, a per-layer residual interface calibration that mitigates post-projection energy drift. The framework requires no additional training, uses only a small unlabeled calibration buffer, and supports integer kernels for low-bit weights and activations while leaving the architecture unchanged. Across representative VLA models on LIBERO, QuantVLA exceeds the task success rates of full-precision baselines, achieves about 70% relative memory savings on the quantized components, and delivers a 1.22x speedup in end-to-end inference latency, providing a practical pathway toward scalable low-bit embodied intelligence under strict compute, memory, and power constraints.

Speculative decoding accelerates LLM inference by drafting multiple tokens and verifying them in parallel with the target model. However, its practical speedup is constrained by the trade-off between draft quality and drafting cost: autoregressive drafters model causal dependencies among draft tokens but incur sequential overhead, while parallel drafters reduce drafting cost but weaken intra-block dependency modeling. In this paper, we propose Domino, a speculative decoding framework that decouples causal dependency modeling from expensive autoregressive draft execution. Domino first uses a parallel draft backbone to produce preliminary draft distributions for the entire block, and then applies a lightweight Domino head to refine them with prefix-dependent causal information. To stabilize teacher-forced causal encoding, we further introduce a base-anchored training curriculum that first strengthens the parallel backbone and then gradually shifts optimization toward the causally corrected final distribution. Experiments on Qwen3 models show that Domino achieves up to \(5.49\times\) end-to-end speedup under the Transformers backend and up to \(5.8\times\) throughput speedup under SGLang serving.

Autoregressive language models generate text one token at a time, yet natural language is inherently structured in multi-token units, including phrases, n-grams, and collocations that carry meaning jointly. This one-token bottleneck limits both the expressiveness of the model during pre-training and its throughput at inference time. Existing remedies such as speculative decoding or diffusion-based language models either leave the underlying bottleneck intact or sacrifice the causal structure essential to language modeling. We propose BitLM, a language model that represents each token as a fixed-length binary code and employs a lightweight diffusion head to denoise multiple tokens in parallel within each block. Crucially, BitLM preserves left-to-right causal attention across blocks while making joint lexical decisions within each block, combining the reliability of autoregressive modeling with the parallelism of iterative refinement. By replacing the large-vocabulary softmax with bitwise denoising, BitLM reframes token generation as iterative commitment in a compact binary space, enabling more efficient pre-training and substantially faster inference without altering the causal foundation that makes language models effective. Our results demonstrate that the one-token-at-a-time paradigm is not a fundamental requirement but an interface choice, and that changing it can yield a stronger and faster language model. We hope BitLM points toward a promising direction for next-generation language model architectures.

Closed-loop driving simulators typically populate their environments with non-ego traffic agents that behave largely the same way, produced either by rule-based traffic managers or by learned models trained toward a single behavioral mode. Recent work introduces style variation through post-hoc labels on observational data or LLM-inferred reward weights, but these signals act as proxies for what a style should reward rather than demonstrations of humans explicitly asked to drive in that style. We introduce PersonaDrive, a pipeline that conditions a vision-language-action (VLA) driving agent on retrieved demonstrations from a style-instructed human driving dataset, in which participants drive CARLA leaderboard routes under aggressive, neutral, and conservative instructions on a driver-in-the-loop rig. The pipeline has three stages: (i) offline triplet mining over per-style human driving data using a combined image-text similarity score; (ii) training a lightweight retrieval head that fuses frozen visual features with a small control encoder over per-style databases; and (iii) fine-tuning a single VLA backbone to treat retrieved context points as in-context behavioral demonstrations during waypoint prediction. At inference, the same backbone is conditioned on any style by swapping which per-style database the retrieval head queries, so selecting a style requires no per-style retraining while enabling human-style, style-diverse non-ego agents for closed-loop simulation. On Bench2Drive, PersonaDrive (no style) improves the driving score by 4.6% over SimLingo and 2.5% over HiP-AD, and under style conditioning attains the highest driving score in every style within a roughly 2% band (its weakest style surpassing the strongest baseline, DMW, by 5.4%), while average speed and acceleration rise by 18% and 25% from the conservative to the aggressive instruction.

Confidence estimation for Vision-Language-Action (VLA) models is essential for robots to perform manipulation tasks in the open world, providing crucial signals for risk-sensitive decision-making and failure anticipation. Existing confidence estimation methods typically rely on ensemble-based paradigms or action-token probabilities to predict the likelihood of task success. However, they still encounter challenges in computational efficiency and cross-architecture generalizability. These methods usually require repeated sampling, leading to inference inefficiency, and are restricted to VLA models with discrete action outputs, making them difficult to apply to continuous action spaces. To address this issue, we propose VLAConf, a one-class discriminative confidence framework. By leveraging frozen pretrained VLA internal representations, VLAConf directly estimates step-wise anomaly scores in a single forward pass using a lightweight confidence head, thereby eliminating the overhead of exhaustive resampling. We additionally use step-conditioned modeling to encode rollout-phase information along the manipulation trajectory. Experiments on the LIBERO benchmark demonstrate that VLAConf significantly improves the quality of the confidence signal constructed for post-hoc calibration, outperforming existing baselines by a large margin in inference efficiency. The effectiveness of VLAConf is further validated in real-robot experiments. To access the source code and supplementary videos, visit https://sites.google.com/view/vlaconf.

The growing size of Large Language Models (LLMs) makes efficient inference challenging, primarily due to the memory demands of the autoregressive Key-Value (KV) cache. Existing eviction or compression methods reduce cost but rely on heuristics, such as recency or past attention scores, which serve only as indirect proxies for a token's future utility and introduce computational overhead. We reframe KV cache eviction as a reinforcement learning (RL) problem: learning to rank tokens by their predicted usefulness for future decoding. To this end, we introduce KV Policy (KVP), a framework of lightweight per-head RL agents trained on pre-computed generation traces using only key and value vectors. Each agent learns a specialized eviction policy guided by a holistic reward, derived from future utility, that evaluates the quality of the ranking across all cache budgets, requiring no modifications to the underlying LLM or additional inference. Evaluated across two model families on the long-context benchmark RULER (up to 128K tokens) and the multi-turn dialogue benchmark OASST2-4k, KVP significantly outperforms strong baselines. Zero-shot tests on standard downstream tasks (BoolQ, LongBench passage retrieval, GovReport) further show that KVP generalizes beyond its training distribution and to considerably longer sequence lengths. These results demonstrate that learning to predict future token utility is a powerful and scalable paradigm for adaptive KV cache management.

Active perception is essential for robotic manipulation when fixed viewpoints leave task-relevant information occluded or unobserved. However, enabling vision-language-action (VLA) models to reason across changing viewpoints and actively acquire informative observations remains challenging. We present ActiveScale, a framework that advances active perception through coordinated model, data, and hardware designs. Our model augments a VLA with historical video observations and explicit camera-pose supervision, using per-frame pose tokens and a lightweight prediction head to associate observations across viewpoints and support a coherent understanding of the scene. To learn from the camera motion naturally present in human activity, we introduce a scalable human--robot mid-training recipe using 1000 hours of egocentric and robotic data, adapting the model to temporal inputs and pose supervision. We further introduce Active-perception Mobile-manipulation Platform (AMP), a robotic platform that supports active perception and mobile manipulation through single-operator teleoperation, enabling scalable collection of demonstrations that coordinate viewpoint changes and manipulation. Experiments demonstrate improved success rates on active-perception tasks, while ablation studies validate the contributions of camera-pose-aware modeling and egocentric mid-training. Together, these components provide an integrated foundation for studying and developing active perception in robotic manipulation.

Reliable contact-rich manipulation requires detecting execution deviations early enough for corrective action. Yet most monitoring methods are reactive, identifying anomalies only after they become observable. Anticipating such anomalies is challenging because visual observations only partially reveal physical interaction, while planned actions describe intended motion rather than their actual physical consequences. We address this problem with MAIA, a multimodal framework for anomaly anticipation. Its vision-action-force world model learns nominal interaction dynamics and predicts the visual and force responses of planned actions, while a lightweight anomaly head predicts impending interaction anomalies. To enable systematic evaluation, we introduce CRIA, a real-world multimodal dataset of 2,852 trajectories spanning 18 contact-rich manipulation tasks, with frame-level annotations of anomaly onset and evolution. Experiments on both seen and novel tasks show that MAIA achieves more accurate anomaly discrimination than representative baselines while providing earlier warnings, with bACC scores of 0.765 and 0.710 and median anticipation lead times of 28.0 and 25.1 steps, respectively. Moreover, using these predictions for anomaly-aware action selection improves end-to-end task success from 52.6% to 61.5% without retraining the underlying manipulation policy. These results highlight the value of modeling future physical consequences for proactive anomaly anticipation.

We present DFormer, a novel RGB-D pretraining framework to learn transferable representations for RGB-D segmentation tasks. DFormer has two new key innovations: 1) Unlike previous works that encode RGB-D information with RGB pretrained backbone, we pretrain the backbone using image-depth pairs from ImageNet-1K, and hence the DFormer is endowed with the capacity to encode RGB-D representations; 2) DFormer comprises a sequence of RGB-D blocks, which are tailored for encoding both RGB and depth information through a novel building block design. DFormer avoids the mismatched encoding of the 3D geometry relationships in depth maps by RGB pretrained backbones, which widely lies in existing methods but has not been resolved. We finetune the pretrained DFormer on two popular RGB-D tasks, i.e., RGB-D semantic segmentation and RGB-D salient object detection, with a lightweight decoder head. Experimental results show that our DFormer achieves new state-of-the-art performance on these two tasks with less than half of the computational cost of the current best methods on two RGB-D semantic segmentation datasets and five RGB-D salient object detection datasets. Our code is available at: https://github.com/VCIP-RGBD/DFormer.

Face forgery detection encompasses multiple critical tasks, including identifying forged images and videos and localizing manipulated regions and temporal segments. Current approaches typically employ task-specific models with independent architectures, leading to computational redundancy and ignoring potential correlations across related tasks. We introduce OmniFD, a unified framework that jointly addresses four core face forgery detection tasks within a single model, i.e., image and video classification, spatial localization, and temporal localization. Our architecture consists of three principal components: (1) a shared Swin Transformer encoder that extracts unified 4D spatiotemporal representations from both images and video inputs, (2) a cross-task interaction module with learnable queries that dynamically captures inter-task dependencies through attention-based reasoning, and (3) lightweight decoding heads that transform refined representations into corresponding predictions for all FFD tasks. Extensive experiments demonstrate OmniFD's advantage over task-specific models. Its unified design leverages multi-task learning to capture generalized representations across tasks, especially enabling fine-grained knowledge transfer that facilitates other tasks. For example, video classification accuracy improves by 4.63% when image data are incorporated. Furthermore, by unifying images, videos and the four tasks within one framework, OmniFD achieves superior performance across diverse benchmarks with high efficiency and scalability, e.g., reducing 63% model parameters and 50% training time. It establishes a practical and generalizable solution for comprehensive face forgery detection in real-world applications. The source code is made available at https://github.com/haotianll/OmniFD.

Distributional metrics such as Fréchet Audio Distance cannot score individual music clips and correlate poorly with human judgments, while the only per-sample learned metric achieving high human correlation is closed-source. We introduce MUQ-EVAL, an open-source per-sample quality metric for AIgenerated music built by training lightweight prediction heads on frozen MuQ-310M features using MusicEval, a dataset of generated clips from 31 text-to-music systems with expert quality ratings. Our simplest model, frozen features with attention pooling and a two-layer MLP, achieves system-level SRCC = 0.957 and utterance-level SRCC = 0.838 with human mean opinion scores. A systematic ablation over training objectives and adaptation strategies shows that no addition meaningfully improves the frozen baseline, indicating that frozen MuQ representations already capture quality-relevant information. Encoder choice is the dominant design factor, outweighing all architectural and training decisions. LoRA-adapted models trained on as few as 150 clips already achieve usable correlation, enabling personalized quality evaluators from individual listener annotations. A controlled degradation analysis reveals selective sensitivity to signal-level artifacts but insensitivity to musical-structural distortions. Our metric, MUQ-EVAL, is fully open-source, outperforms existing open per-sample metrics, and runs in real time on a single consumer GPU. Code, model weights, and evaluation scripts are available at https://github.com/dgtql/MuQ-Eval.

Modern text-to-image diffusion models encode rich visual priors, but expose them only through one-way text-conditioned generation. Existing unified vision--language models derived from them recover bidirectional capability through large-scale joint pretraining or substantial retraining of the text pathway, discarding the strong image prior the text-to-image backbone already encodes. We introduce FullFlow, a parameter-efficient recipe that upgrades a pretrained rectified-flow text-to-image model into a bidirectional vision--language generator by training only LoRA adapters and lightweight text heads. FullFlow keeps images in their native continuous flow and adds a discrete insertion process for text. Separate image and text timesteps turn inference into trajectory selection in a two-dimensional generative space, enabling textrightarrowimage, imagerightarrowtext, joint sampling, and partial-text prediction with a single backbone. On Stable Diffusion 3 (SD3) under an identical trainable-parameter count and matched LoRA rank, FullFlow improves textrightarrowimage FID from 62.7 to 31.6 and imagerightarrowtext CIDEr from 2.0 to 99.4 over a LoRA equivalent following the previous SOTA formulation (Dual Diffusion) at matched wall-clock training time, while reducing peak VRAM from {sim}84\,GB to {sim}38\,GB and raising throughput by {sim}8times on two RTX A5000 GPUs in under 24 hours, training only {sim}5% of the backbone parameters. The same recipe transfers to FLUX.1-dev and supports downstream VQA through partial-text generation. These results show that strong bidirectional vision--language capability can be unlocked from pretrained text-to-image flow models without full multimodal pretraining.

Evaluating the physical consistency of generated videos remains a fundamental challenge. Existing approaches rely on off-the-shelf vision-language models, which can often be myopic to physical dynamics, or fine-tuned evaluators trained on human annotations, which overfit to dataset-specific cues and fail to generalize. A key challenge is that existing supervision sources provide either relative ordering or absolute scores, but not both reliably and consistently across varied settings. To this end, we introduce PhyProbe, an evaluator that extracts features from a frozen pretrained spatio-temporal encoder and maps them to a scalar physical consistency violation score via a lightweight scoring head. PhyProbe is trained through a unified objective combining pairwise ranking, regression on noisy scalar annotations, and anchor-based calibration over a curated set of heterogeneous supervision sources. Experiments show that PhyProbe outperforms prior methods on most pairwise benchmarks spanning real-generated and generated-generated pairs under varying correspondence, with the largest gains in no-correspondence and generated-generated settings where existing fine-tuned evaluators degrade sharply. PhyProbe achieves strong correlation with human judgments, with close agreement between rank-based and linear metrics, indicating that scores are both well ordered and anchored to a stable [0, 1] scale. Further, despite being trained on supervision indicative of physical consistency, without explicit general-preference labels, PhyProbe also performs competitively on human preference benchmarks: consistent with the observation that physics violations are entangled with broader quality degradations.

World Action Models (WAMs) jointly predict future video and generate actions, yet remain sensitive to task-irrelevant visual perturbations, i.e., changes in visual appearance that should not affect robot behavior. We identify a gap in conventional WAM training: video prediction encourages representations to preserve appearance information, while action generation does not explicitly enforce invariance to task-irrelevant appearance. Data augmentation exposes WAMs to such perturbations but does not require perturbed and nominal observations to produce consistent action representations, and alignment with external pretrained features does not guarantee the desired invariance. To address this gap, we propose PICA-WAM, a self-supervised training framework that casts perturbation invariance as an auxiliary cross-appearance self-alignment task for WAMs. An exponential-moving-average (EMA) teacher processes the nominal observation to provide a deeper-layer target, while the online WAM processes a perturbed observation and aligns its shallower-layer action representation to this target through a lightweight projection head. Across four strong WAMs evaluated on RoboTwin 2.0, LIBERO-Plus, EBench, and a real robot, PICA-WAM consistently improves robustness under visual perturbations, preserves nominal performance in simulation, and raises the real robot success rate. PICA-WAM further reduces the sensitivity of video features to task-irrelevant appearance and its propagation into actions, as shown by paired layer-wise diagnostics. Code: https://github.com/YudeZou/PICA-WAM-release

Removing objects from videos remains difficult in the presence of real-world imperfections such as shadows, abrupt motion, and defective masks. Existing diffusion-based video inpainting models often struggle to maintain temporal stability and visual consistency under these challenges. We propose Stable Video Object Removal (SVOR), a robust framework that achieves shadow-free, flicker-free, and mask-defect-tolerant removal through three key designs: (1) Mask Union for Stable Erasure (MUSE), a windowed union strategy applied during temporal mask downsampling to preserve all target regions observed within each window, effectively handling abrupt motion and reducing missed removals; (2) Denoising-Aware Segmentation (DA-Seg), a lightweight segmentation head on a decoupled side branch equipped with Denoising-Aware AdaLN and trained with mask degradation to provide an internal diffusion-aware localization prior without affecting content generation; and (3) Curriculum Two-Stage Training: where Stage I performs self-supervised pretraining on unpaired real-background videos with online random masks to learn realistic background and temporal priors, and Stage II refines on synthetic pairs using mask degradation and side-effect-weighted losses, jointly removing objects and their associated shadows/reflections while improving cross-domain robustness. Extensive experiments show that SVOR attains new state-of-the-art results across multiple datasets and degraded-mask benchmarks, advancing video object removal from ideal settings toward real-world applications.

Satellite Earth-observation (EO) time series in the optical and microwave ranges of the electromagnetic spectrum are often irregular due to orbital patterns and cloud obstruction. Compositing addresses these issues but loses information with respect to vegetation phenology, which is critical for many downstream tasks. Instead, we present TESSERA, a pixel-wise foundation model for multi-modal (Sentinel-1/2) EO time series that learns robust, label-efficient embeddings. During model training, TESSERA uses Barlow Twins and sparse random temporal sampling to enforce invariance to the selection of valid observations. We employ two key regularizers: global shuffling to decorrelate spatial neighborhoods and mix-based regulation to improve invariance under extreme sparsity. We find that for diverse classification, segmentation, and regression tasks, TESSERA embeddings deliver state-of-the-art accuracy with high label efficiency, often requiring only a small task head and minimal computation. To democratize access, adhere to FAIR - principles, and simplify use, we release global, annual, 10m, pixel-wise int8 embeddings together with open weights/code and lightweight adaptation heads, thus providing practical tooling for large-scale retrieval and inference at planetary scale. All code and data are available at: https://github.com/ucam-eo/tessera.

Large-scale vision language pre-training has recently shown promise for no-reference image-quality assessment (NR-IQA), yet the relative merits of modern Vision Transformer foundations remain poorly understood. In this work, we present the first systematic evaluation of six prominent pretrained backbones, CLIP, SigLIP2, DINOv2, DINOv3, Perception, and ResNet, for the task of No-Reference Image Quality Assessment (NR-IQA), each finetuned using an identical lightweight MLP head. Our study uncovers two previously overlooked factors: (1) SigLIP2 consistently achieves strong performance; and (2) the choice of activation function plays a surprisingly crucial role, particularly for enhancing the generalization ability of image quality assessment models. Notably, we find that simple sigmoid activations outperform commonly used ReLU and GELU on several benchmarks. Motivated by this finding, we introduce a learnable activation selection mechanism that adaptively determines the nonlinearity for each channel, eliminating the need for manual activation design, and achieving new state-of-the-art SRCC on CLIVE, KADID10K, and AGIQA3K. Extensive ablations confirm the benefits across architectures and regimes, establishing strong, resource-efficient NR-IQA baselines.

Safety heads are lightweight classifiers attached to pretrained language models for flagging harmful inputs before generation. Their empirical detection performance has been studied, but their formal robustness properties remain largely unexplored. We ask when a State Space Model (SSM)-based safety head can be certified to produce the same prediction for all inputs within a bounded embedding-space perturbation. We prove that the answer turns on a single condition: the l_infty norm of the state transition matrix must satisfy A_infty<1 (the contraction condition), which enables exact interval bound propagation (IBP) certification for linear time-invariant classifiers. When the contraction condition holds, the reachable output interval has bounded steady-state width and examples can be certified as robustly classified. When it fails, the interval grows exponentially with sequence length and certification is impossible at any practical perturbation radius. We enforce contraction with a hinge penalty and show on toxic comment data that certified fraction improves from 41\% to 59\%, with a sharp empirical phase transition at A_infty=1 matching the theory. Applying a contraction-regularized S4 head to jailbreak detection on JailbreakBench, we achieve a zero-shot transfer to AdvBench (DR=0.994) and HarmBench (DR=0.988). A logistic regression on mean-pooled Mamba-130M embeddings matches or exceeds the S4 head on every detection metric, confirming that harmful intent is already linearly separable in the embedding space. The S4 safety head's contribution is not superior discrimination but the formal certification that no probe-based approach provides.

Joint audio-video generation models have shown that unified generation yields stronger cross-modal coherence than cascaded approaches. However, existing models couple modalities throughout denoising via pervasive attention, treating high-level semantics and low-level details in a fully entangled manner. This is suboptimal for talking head synthesis: while audio and facial motion are semantically correlated, their low-level realizations (acoustic signals and visual textures) follow distinct rendering processes. Enforcing joint modeling across all levels causes unnecessary entanglement and reduces efficiency. We propose Talker-T2AV, an autoregressive diffusion framework where high-level cross-modal modeling occurs in a shared backbone, while low-level refinement uses modality-specific decoders. A shared autoregressive language model jointly reasons over audio and video in a unified patch-level token space. Two lightweight diffusion transformer heads decode the hidden states into frame-level audio and video latents. Experiments on talking portrait benchmarks show Talker-T2AV outperforms dual-branch baselines in lip-sync accuracy, video quality, and audio quality, achieving stronger cross-modal consistency than cascaded pipelines.

Real-world robotic manipulation in homes and factories demands reliability, efficiency, and robustness that approach or surpass skilled human operators. We present RL-100, a real-world reinforcement learning training framework built on diffusion visuomotor policies trained bu supervised learning. RL-100 introduces a three-stage pipeline. First, imitation learning leverages human priors. Second, iterative offline reinforcement learning uses an Offline Policy Evaluation procedure, abbreviated OPE, to gate PPO-style updates that are applied in the denoising process for conservative and reliable improvement. Third, online reinforcement learning eliminates residual failure modes. An additional lightweight consistency distillation head compresses the multi-step sampling process in diffusion into a single-step policy, enabling high-frequency control with an order-of-magnitude reduction in latency while preserving task performance. The framework is task-, embodiment-, and representation-agnostic and supports both 3D point clouds and 2D RGB inputs, a variety of robot platforms, and both single-step and action-chunk policies. We evaluate RL-100 on seven real-robot tasks spanning dynamic rigid-body control, such as Push-T and Agile Bowling, fluids and granular pouring, deformable cloth folding, precise dexterous unscrewing, and multi-stage orange juicing. RL-100 attains 100\% success across evaluated trials for a total of 900 out of 900 episodes, including up to 250 out of 250 consecutive trials on one task. The method achieves near-human teleoperation or better time efficiency and demonstrates multi-hour robustness with uninterrupted operation lasting up to two hours.

Interactive image segmentation enables annotators to efficiently perform pixel-level annotation for segmentation tasks. However, the existing interactive segmentation pipeline suffers from inefficient computations of interactive models because of the following two issues. First, annotators' later click is based on models' feedback of annotators' former click. This serial interaction is unable to utilize model's parallelism capabilities. Second, in each interaction step, the model handles the invariant image along with the sparse variable clicks, resulting in a process that's highly repetitive and redundant. For efficient computations, we propose a method named InterFormer that follows a new pipeline to address these issues. InterFormer extracts and preprocesses the computationally time-consuming part i.e. image processing from the existing process. Specifically, InterFormer employs a large vision transformer (ViT) on high-performance devices to preprocess images in parallel, and then uses a lightweight module called interactive multi-head self attention (I-MSA) for interactive segmentation. Furthermore, the I-MSA module's deployment on low-power devices extends the practical application of interactive segmentation. The I-MSA module utilizes the preprocessed features to efficiently response to the annotator inputs in real-time. The experiments on several datasets demonstrate the effectiveness of InterFormer, which outperforms previous interactive segmentation models in terms of computational efficiency and segmentation quality, achieve real-time high-quality interactive segmentation on CPU-only devices. The code is available at https://github.com/YouHuang67/InterFormer.

Video generation is pivotal to digital media creation, and recent advances in autoregressive video generation have markedly enhanced the efficiency of real-time video synthesis. However, existing approaches generally rely on heuristic KV Cache policies, which ignore differences in token importance in long-term video generation. This leads to the loss of critical spatiotemporal information and the accumulation of redundant, invalid cache, thereby degrading video generation quality and efficiency. To address this limitation, we first observe that token contributions to video generation are highly time-heterogeneous and accordingly propose a novel Past- and Future-Informed KV Cache Policy (PaFu-KV). Specifically, PaFu-KV introduces a lightweight Salience Estimation Head distilled from a bidirectional teacher to estimate salience scores, allowing the KV cache to retain informative tokens while discarding less relevant ones. This policy yields a better quality-efficiency trade-off by shrinking KV cache capacity and reducing memory footprint at inference time. Extensive experiments on benchmarks demonstrate that our method preserves high-fidelity video generation quality while enables accelerated inference, thereby enabling more efficient long-horizon video generation. Our code will be released upon paper acceptance.

We present a discriminative multimodal reward model that scores all candidate responses in a single forward pass. Conventional discriminative reward models evaluate each response independently, requiring multiple forward passes, one for each potential response. Our approach concatenates multiple responses with separator tokens and applies cross-entropy over their scalar scores, enabling direct comparative reasoning and efficient N-way preference learning. The multi-response design also yields up to Ntimes wall-clock speedup and FLOPs reduction over conventional single-response scoring. To enable N-way reward evaluation beyond existing pairwise benchmarks, we construct two new benchmarks: (1) MR^2Bench-Image contains human-annotated rankings over responses from 8 diverse models; (2) MR^2Bench-Video is a large-scale video-based reward benchmark derived from 94K crowdsourced pairwise human judgments over video question-answering spanning 19 models, denoised via preference graph ensemble. Both benchmarks provide 4-response evaluation variants sampled from the full rankings. Built on a 4B vision-language backbone with LoRA fine-tuning and a lightweight MLP value head, our model achieves state-of-the-art results on six multimodal reward benchmarks, including MR^2Bench-Image, MR^2Bench-Video, and four other existing benchmarks. Our model outperforms existing larger generative and discriminative reward models. We further demonstrate that our reward model, when used in reinforcement learning with GRPO, produces improved policy models that maintain performance across standard multimodal benchmarks while substantially improving open-ended generation quality, outperforming a single-response discriminative reward model (RM) baseline by a large margin in both training stability and open-ended generation quality.

While large vision-language-action (VLA) models and generative world models (WM) have advanced long-horizon embodied intelligence, their practical deployment remains challenged by uncertainty in learning-based action generation. Low-quality actions may cause physical failures during execution or lead to misleading world-model rollouts with redundant rendering costs. To address this issue, we propose Pre-VLA, a unified runtime verification architecture that performs preemptive action validity assessment before physical execution or world-model imagination. Pre-VLA leverages an efficient multimodal backbone with modality-aware pooling and a lightweight dual-branch head to predict both safety confidence and critic-derived advantage scores for candidate action chunks. To handle severe class imbalance and unstable boundary decisions, we train Pre-VLA with a multi-task objective combining Focal classification, advantage regression, and soft-threshold calibration. During deployment, a dual-mode preemptive resampling scheduler filters low-quality actions and triggers adaptive resampling under a limited computation budget. Experiments on the LIBERO benchmark show that Pre-VLA improves the average closed-loop success rate across four suites from 30.79\% to 37.62\% over RynnVLA-002, reduces task execution steps, achieves 183.9 ms average forward verification time per action chunk, and mitigates error accumulation in world-model rollouts.

Pre-trained diffusion models provide rich multi-scale latent features and are emerging as powerful vision backbones. While recent works such as Marigold~ke2024repurposing and Lotus~he2024lotus adapt diffusion priors for dense prediction with strong cross-domain generalization, their potential for structured outputs (e.g., human pose estimation) remains underexplored. In this paper, we propose SDPose, a fine-tuning framework built upon Stable Diffusion to fully exploit pre-trained diffusion priors for human pose estimation. First, rather than modifying cross-attention modules or introducing learnable embeddings, we directly predict keypoint heatmaps in the SD U-Net's image latent space to preserve the original generative priors. Second, we map these latent features into keypoint heatmaps through a lightweight convolutional pose head, which avoids disrupting the pre-trained backbone. Finally, to prevent overfitting and enhance out-of-distribution robustness, we incorporate an auxiliary RGB reconstruction branch that preserves domain-transferable generative semantics. To evaluate robustness under domain shift, we further construct COCO-OOD, a style-transferred variant of COCO with preserved annotations. With just one-fifth of the training schedule used by Sapiens on COCO, SDPose attains parity with Sapiens-1B/2B on the COCO validation set and establishes a new state of the art on the cross-domain benchmarks HumanArt and COCO-OOD. Furthermore, we showcase SDPose as a zero-shot pose annotator for downstream controllable generation tasks, including ControlNet-based image synthesis and video generation, where it delivers qualitatively superior pose guidance.

In this paper, we propose GTA-VLA(Guide, Think, Act), an interactive Vision-Language-Action (VLA) framework that enables spatially steerable embodied reasoning by allowing users to guide robot policies with explicit visual cues. Existing VLA models learn a direct "Sense-to-Act" mapping from multimodal observations to robot actions. While effective within the training distribution, such tightly coupled policies are brittle under out-of-domain (OOD) shifts and difficult to correct when failures occur. Although recent embodied Chain-of-Thought (CoT) approaches expose intermediate reasoning, they still lack a mechanism for incorporating human spatial guidance, limiting their ability to resolve visual ambiguities or recover from mistakes. To address this gap, our framework allows users to optionally guide the policy with spatial priors, such as affordance points, boxes, and traces, which the subsequent reasoning process can directly condition on. Based on these inputs, the model generates a unified spatial-visual Chain-of-Thought that integrates external guidance with internal task planning, aligning human visual intent with autonomous decision-making. For practical deployment, we further couple the reasoning module with a lightweight reactive action head for efficient action execution. Extensive experiments demonstrate the effectiveness of our approach. On the in-domain SimplerEnv WidowX benchmark, our framework achieves a state-of-the-art 81.2% success rate. Under OOD visual shifts and spatial ambiguities, a single visual interaction substantially improves task success over existing methods, highlighting the value of interactive reasoning for failure recovery in embodied control. Details of the project can be found here: https://signalispupupu.github.io/GTA-VLA_ProjPage/

Retrieval-Augmented Generation (RAG) has become a standard approach for enhancing large language models (LLMs) with external knowledge, mitigating hallucinations, and improving factuality. However, existing systems rely on generating natural language queries at each hop and maintaining a strict architectural separation between retriever and generator, preventing them from leveraging the full representational capacity of the LLM. We propose LAnR (Latent Abstraction for RAG), a unified framework in which a single LLM jointly performs encoding, retrieval, and generation entirely within its own latent space. Rather than generating textual queries, LAnR produces dense retrieval vectors from the hidden states of a designated [PRED] token and uses them to match against encoded document representations from the same model. Furthermore, LAnR adaptively decides when sufficient evidence has been retrieved using a lightweight MLP control head over those same hidden states, eliminating both the separate retriever and explicit token-level stopping reasoning. This design is motivated by our empirical observation that answer token entropy reliably signals retrieval sufficiency. Extensive experiments on six QA benchmarks spanning single-hop and multi-hop settings demonstrate that LAnR outperforms existing RAG methods, while achieving improved inference efficiency through reduced number of retrieval calls and tighter model integration.

Recent 3D geometric foundation models, such as VGGT, provide robust feed-forward 3D reconstruction by directly predicting camera poses and 3D scene points from input images. However, their results remain inaccurate, and scaling them to long sequences or large unordered image sets typically requires chunk-wise processing, which can introduce drift and inconsistency. We present Glob3R, a global SfM-style reconstruction built on 3D foundation models. Our key idea is to explicitly optimize feed-forward geometric predictions. To this end, we augment a frozen Pi3X backbone with a lightweight dense matching head that predicts image warps between selected reference frames and neighboring views. These dense warps are converted into sparse but reliable multi-view feature tracks, which provide correspondence constraints for global optimization. We further introduce a keyframe-based sliding-window association strategy that propagates tracks and relative poses across overlapping windows, enabling scalable reconstruction. Finally, we perform global motion averaging and bundle adjustment to refine camera poses, reduce scale inconsistencies, and recover dense scene geometry. Extensive experiments on indoor, outdoor, large-scale driving, and unordered SfM benchmarks demonstrate that Glob3R achieves robust and accurate reconstruction. It consistently improves over feed-forward foundation-model baselines and recent scalable reconstruction methods, while being more robust than classical SfM pipelines. The refined poses also lead to higher-quality neural rendering, validating the benefit of combining foundation-model priors with global geometric optimization. Project page: https://junyuandeng.github.io/Glob3r

Deep learning methods for pathology are constrained by the limited availability and high cost of large-scale pixel-level annotations. Synthetic data can alleviate this limitation, but existing pipelines often lack reliable quality control and remain weakly connected to downstream analysis. To address these issues, we propose a three-stage framework that integrates automated data screening, generative representation learning, and efficient adaptation to downstream tasks. First, we develop a pathology agent system to assess image quality and filter samples, resulting in TCGA-200K, a dataset containing 217,030 pathology patches selected from the public TCGA repository. Second, we train a generative model on the screened data. In addition to image synthesis, its backbone learns structural and semantic representations that can be transferred to downstream tasks. Third, we adapt the pretrained generative backbone to semantic segmentation using a lightweight task-specific head. We further introduce PathSeg-380K, a semantic segmentation dataset with expert annotations for approximately 380,000 cells across 12 cell types. Experiments on multiple pathology datasets show that the proposed framework achieves state-of-the-art segmentation performance. Our code is publicly available at https://github.com/script-Yang/Agent-GenPath.

Recently, 3D Gaussian Splatting, as a novel 3D representation, has garnered attention for its fast rendering speed and high rendering quality. However, this comes with high memory consumption, e.g., a well-trained Gaussian field may utilize three million Gaussian primitives and over 700 MB of memory. We credit this high memory footprint to the lack of consideration for the relationship between primitives. In this paper, we propose a memory-efficient Gaussian field named SUNDAE with spectral pruning and neural compensation. On one hand, we construct a graph on the set of Gaussian primitives to model their relationship and design a spectral down-sampling module to prune out primitives while preserving desired signals. On the other hand, to compensate for the quality loss of pruning Gaussians, we exploit a lightweight neural network head to mix splatted features, which effectively compensates for quality losses while capturing the relationship between primitives in its weights. We demonstrate the performance of SUNDAE with extensive results. For example, SUNDAE can achieve 26.80 PSNR at 145 FPS using 104 MB memory while the vanilla Gaussian splatting algorithm achieves 25.60 PSNR at 160 FPS using 523 MB memory, on the Mip-NeRF360 dataset. Codes are publicly available at https://runyiyang.github.io/projects/SUNDAE/.

Diffusion models face a fundamental trade-off between generation quality and computational efficiency. Latent Diffusion Models (LDMs) offer an efficient solution but suffer from potential information loss and non-end-to-end training. In contrast, existing pixel space models bypass VAEs but are computationally prohibitive for high-resolution synthesis. To resolve this dilemma, we propose DiP, an efficient pixel space diffusion framework. DiP decouples generation into a global and a local stage: a Diffusion Transformer (DiT) backbone operates on large patches for efficient global structure construction, while a co-trained lightweight Patch Detailer Head leverages contextual features to restore fine-grained local details. This synergistic design achieves computational efficiency comparable to LDMs without relying on a VAE. DiP is accomplished with up to 10times faster inference speeds than previous method while increasing the total number of parameters by only 0.3%, and achieves an 1.79 FID score on ImageNet 256times256.

Recent progress in large models has led to significant advances in unified multimodal generation and understanding. However, the development of models that unify motion-language generation and understanding remains largely underexplored. Existing approaches often fine-tune large language models (LLMs) on paired motion-text data, which can result in catastrophic forgetting of linguistic capabilities due to the limited scale of available text-motion pairs. Furthermore, prior methods typically convert motion into discrete representations via quantization to integrate with language models, introducing substantial jitter artifacts from discrete tokenization. To address these challenges, we propose LLaMo, a unified framework that extends pretrained LLMs through a modality-specific Mixture-of-Transformers (MoT) architecture. This design inherently preserves the language understanding of the base model while enabling scalable multimodal adaptation. We encode human motion into a causal continuous latent space and maintain the next-token prediction paradigm in the decoder-only backbone through a lightweight flow-matching head, allowing for streaming motion generation in real-time (>30 FPS). Leveraging the comprehensive language understanding of pretrained LLMs and large-scale motion-text pretraining, our experiments demonstrate that LLaMo achieves high-fidelity text-to-motion generation and motion-to-text captioning in general settings, especially zero-shot motion generation, marking a significant step towards a general unified motion-language large model.

Generative video models now synthesize footage nearly indistinguishable from reality. Their promise as interactive tools hinges on fine-grained control of how objects and the camera move over time, yet each existing approach captures only part of this: camera-parameter methods steer the viewpoint but cannot move objects, 2D-trajectory methods act in the image plane and ignore depth and occlusion, and recent 3D methods add geometry but run only offline at a fixed length. In particular, none combines 3D-consistent control of both camera and objects with real-time, streaming generation. Here we show that camera motion, object trajectories, and depth can be unified into a single 3D point-track representation, from which one model performs joint camera and object control, depth editing, and motion transfer in a single forward pass. To learn this interface at scale, we mine in-the-wild video for 3D motion supervision, yielding OpenVidHD-Motion3D, and encode it with a lightweight Geometric Motion Head that plugs into a pretrained video diffusion model. Because this encoder is temporally separable, we distill the model into a causal streaming student that generates arbitrarily long video in four denoising steps at memory independent of length. This unified design surpasses prior camera-only, 2D, and offline-3D methods in motion-control precision while covering modalities they address only in isolation. 4DStreamCtrl runs at 20 FPS on a single high-end GPU for 480p video and stays temporally coherent over hundreds of frames, enabling, to our knowledge, interactive 4D-controllable streaming generation for the first time. More broadly, grounding generation in explicit 3D geometry with efficient causal inference points toward interactive world models with closed-loop spatiotemporal control, from controllable simulators to real-time visual imagination for embodied agents.

Learning generalizable vision-language-action (VLA) models from large-scale human videos is promising but challenging due to cross-embodiment discrepancies in both visual observations and executable actions. While latent action models reduce the action execution gap by learning action abstractions, they still rely on visual features. Thus, misaligned human and robot visual representations can lead to inconsistencies in policy inputs and induce domain-dependent latent actions, hindering effective co-training with human videos. To address this, we propose HARP, a human-robot aligned representation learning framework for more effective VLA pretraining from human videos. Specifically, HARP uses limited paired human-robot demonstrations as cross-embodiment bridges and abundant unpaired human and robot videos as a scalable dynamics supervision data source. It trains a robot-adapted visual encoder and a latent action model with manipulation-centric auxiliary cues and a source-relative pair-discriminative alignment loss, which adapts robot representations toward human semantics while preserving pair-level discrimination. The learned aligned vision encoder and latent action model provide a unified vision and action representation for VLA-style policy learning, where human and robot videos provide vision-language-to-latent-action supervision and a lightweight robot action head grounds latent actions into executable commands. Experiments on feature visualization, simulation, and realworld manipulation show improved human-robot alignment and downstream policy performance, achieving 4.481 average length on CALVIN ABCrightarrowD and a 7.1\% realworld success rate gain over the strongest baseline.

Learned-memory methods store information in an explicit table and consume it through a separate reader, allowing addressing, storage, and reading to be modified independently. We study whether useful memory can also be generated rather than only retrieved. MemoryAthena uses three pathways: direct Engram retrieval (E), generation from retrieved Engram cues (GE), and generation from causal backbone states without consulting the memory table (GH). Generated memory is conditionally useful: it can complement E in one context but interfere with it in another. MemoryAthena therefore treats E as an anchor and learns when a generated representation should intervene. With the backbone, memory, generators, and readers frozen, a lightweight causal routing head is trained from counterfactual future-token likelihood advantages of GE and GH relative to E. At inference time, an admitted candidate modifies the E residual through bounded interpolation, while rejection recovers the direct pathway exactly. On question answering, MemoryAthena raises the five-task average from 37.65 to 39.28 over the direct pathway of the same checkpoint, while the six-task general-NLP average increases from 76.73 to 79.13. The complete memory-side system contains approximately 201M parameters, excluding the frozen backbone. Further analyses show complementary strengths among E, GE, and GH across tasks and inputs. These results support generated memory as a selective correction to direct retrieval and highlight routing when, which, and how strongly to intervene as the central challenge.

The joint-embedding predictive architecture (JEPA) recently has shown impressive results in extracting visual representations from unlabeled imagery under a masking strategy. However, we reveal its disadvantages, notably its insufficient understanding of local semantics. This deficiency originates from masked modeling in the embedding space, resulting in a reduction of discriminative power and can even lead to the neglect of critical local semantics. To bridge this gap, we introduce DMT-JEPA, a novel masked modeling objective rooted in JEPA, specifically designed to generate discriminative latent targets from neighboring information. Our key idea is simple: we consider a set of semantically similar neighboring patches as a target of a masked patch. To be specific, the proposed DMT-JEPA (a) computes feature similarities between each masked patch and its corresponding neighboring patches to select patches having semantically meaningful relations, and (b) employs lightweight cross-attention heads to aggregate features of neighboring patches as the masked targets. Consequently, DMT-JEPA demonstrates strong discriminative power, offering benefits across a diverse spectrum of downstream tasks. Through extensive experiments, we demonstrate our effectiveness across various visual benchmarks, including ImageNet-1K image classification, ADE20K semantic segmentation, and COCO object detection tasks. Code is available at: https://github.com/DMTJEPA/DMTJEPA.

Financial transaction fraud prevention faces challenges such as complex relationship structures, concealed behavioral patterns, and dynamically changing data distribution. Discrimination models relying solely on independent sample features are insufficient to fully characterize the risks of group collaboration and chain transfers within transaction networks. This paper proposes a graph neural network representation learning and risk discrimination framework for financial transaction fraud prevention. It integrates transaction records and identity information into node attributes and constructs a transaction graph based on shared attributes and interaction consistency to explicitly model inter-transaction relationships. In model design, a multi-layer message passing mechanism is employed to aggregate neighborhood information, learn node embedding representations containing structural context semantics, and output transaction-level fraud probability and risk scores through a lightweight risk discrimination head. A weighted supervision objective is introduced to mitigate training bias caused by class imbalance, and structural consistency regularization constraints are combined to suppress the impact of noisy edges on representation drift, thereby improving the stability and usability of risk characterization. Experiments are conducted on a publicly available financial transaction dataset, comparing various methods in the same direction and comprehensively evaluating them under a unified evaluation protocol. The results show that the proposed method outperforms other methods in risk ranking and probability calibration quality, validating the effectiveness of graph structure modeling and representation learning collaboration in financial transaction fraud prevention.

Recent 3D foundation models provide powerful feature representations for point cloud learning by controlling spatial granularity. However, relying on a fixed spatial granularity severely limits generalization in applications like plant phenotyping, where organ morphology and size vary substantially across species and growth stages. To address this, we propose AGS-PlantSeg, a few-shot 3D plant organ segmentation method that leverages the frozen Utonia (arXiv:2603.03283) foundation model combined with Adaptive Granularity Selection. By dynamically selecting the best granularity levels for each specific plant model, our method extracts optimized geometric features for a lightweight MLP segmentation head. Extensive experiments across PLANesT-3D (arXiv:2407.21150), Pheno4D , and Crops3D demonstrate that AGS-PlantSeg significantly improves cross-species generalization, achieving 88.9% average mIoU performance and outperforming fixed-granularity baselines by 2.5 mIoU points. Despite requiring minimal annotated data, our approach is highly competitive with fully supervised, plant-specific architectures.

With the emergence of service robots and surveillance cameras, dynamic face recognition (DFR) in wild has received much attention in recent years. Face detection and head pose estimation are two important steps for DFR. Very often, the pose is estimated after the face detection. However, such sequential computations lead to higher latency. In this paper, we propose a low latency and lightweight network for simultaneous face detection, landmark localization and head pose estimation. Inspired by the observation that it is more challenging to locate the facial landmarks for faces with large angles, a pose loss is proposed to constrain the learning. Moreover, we also propose an uncertainty multi-task loss to learn the weights of individual tasks automatically. Another challenge is that robots often use low computational units like ARM based computing core and we often need to use lightweight networks instead of the heavy ones, which lead to performance drop especially for small and hard faces. In this paper, we propose online feedback sampling to augment the training samples across different scales, which increases the diversity of training data automatically. Through validation in commonly used WIDER FACE, AFLW and AFLW2000 datasets, the results show that the proposed method achieves the state-of-the-art performance in low computational resources. The code and data will be available at https://github.com/lyp-deeplearning/MOS-Multi-Task-Face-Detect.

We present a lightweight and affordable motion capture method based on two smartwatches and a head-mounted camera. In contrast to the existing approaches that use six or more expert-level IMU devices, our approach is much more cost-effective and convenient. Our method can make wearable motion capture accessible to everyone everywhere, enabling 3D full-body motion capture in diverse environments. As a key idea to overcome the extreme sparsity and ambiguities of sensor inputs, we integrate 6D head poses obtained from the head-mounted cameras for motion estimation. To enable capture in expansive indoor and outdoor scenes, we propose an algorithm to track and update floor level changes to define head poses, coupled with a multi-stage Transformer-based regression module. We also introduce novel strategies leveraging visual cues of egocentric images to further enhance the motion capture quality while reducing ambiguities. We demonstrate the performance of our method on various challenging scenarios, including complex outdoor environments and everyday motions including object interactions and social interactions among multiple individuals.

Transformers rely on explicit positional encoding to model structure in data. While Rotary Position Embedding (RoPE) excels in 1D domains, its application to image generation reveals significant limitations such as fine-grained spatial relation modeling, color cues, and object counting. This paper identifies key limitations of standard multi-dimensional RoPE-rigid frequency allocation, axis-wise independence, and uniform head treatment-in capturing the complex structural biases required for fine-grained image generation. We propose HARoPE, a head-wise adaptive extension that inserts a learnable linear transformation parameterized via singular value decomposition (SVD) before the rotary mapping. This lightweight modification enables dynamic frequency reallocation, semantic alignment of rotary planes, and head-specific positional receptive fields while rigorously preserving RoPE's relative-position property. Extensive experiments on class-conditional ImageNet and text-to-image generation (Flux and MMDiT) demonstrate that HARoPE consistently improves performance over strong RoPE baselines and other extensions. The method serves as an effective drop-in replacement, offering a principled and adaptable solution for enhancing positional awareness in transformer-based image generative models.

Vision-Language-Action (VLA) models leverage large-scale vision-language pretraining for flexible robot manipulation, yet at test time they remain brittle to changed object positions and to familiar scenes paired with different instructions. A growing family of methods addresses this brittleness by supplying the policy with grounding signals, such as 2D pixel coordinates for object localization and placement. However, we find that how the grounding signal is represented and injected matters more than the signal itself. In this work, we propose a lightweight module that represents the grounding signal in 3D and injects the resulting embedding directly into the action head. The module is a two-layer MLP and requires no changes to the VLA backbone or pretraining pipeline, yet it yields substantially larger gains than language- or visual-prompting alternatives. On LIBERO-PRO, our method improves the average success rate of GR00T-N1.6 from 31.2 to 77.5 under task perturbation and from 28.1 to 60.2 under position perturbation. Comparable gains are also achieved for π_{0.5}, demonstrating that the mechanism is backbone-agnostic across VLAs with diffusion-based action heads. We further validate the practical applicability with real-world experiments. Together, these results support our central finding: lifting adequate 2D grounding into 3D and injecting it into the action head enables spatial and instance-level task generalization in VLAs.

Recent advances in learned control, large-scale simulation, and generative models have accelerated progress toward general-purpose robotic controllers, yet the field still lacks platforms suitable for safe, expressive, long-term deployment in human environments. Most existing humanoids are either closed industrial systems or academic prototypes that are difficult to deploy and operate around people, limiting progress in robotics. We introduce Sprout, a developer platform designed to address these limitations through an emphasis on safety, expressivity, and developer accessibility. Sprout adopts a lightweight form factor with compliant control, limited joint torques, and soft exteriors to support safe operation in shared human spaces. The platform integrates whole-body control, manipulation with integrated grippers, and virtual-reality-based teleoperation within a unified hardware-software stack. An expressive head further enables social interaction -- a domain that remains underexplored on most utilitarian humanoids. By lowering physical and technical barriers to deployment, Sprout expands access to capable humanoid platforms and provides a practical basis for developing embodied intelligence in real human environments.

Accurate detection and classification of nuclei in histopathology images are critical for diagnostic and research applications. We present KongNet, a multi-headed deep learning architecture featuring a shared encoder and parallel, cell-type-specialised decoders. Through multi-task learning, each decoder jointly predicts nuclei centroids, segmentation masks, and contours, aided by Spatial and Channel Squeeze-and-Excitation (SCSE) attention modules and a composite loss function. We validate KongNet in three Grand Challenges. The proposed model achieved first place on track 1 and second place on track 2 during the MONKEY Challenge. Its lightweight variant (KongNet-Det) secured first place in the 2025 MIDOG Challenge. KongNet pre-trained on the MONKEY dataset and fine-tuned on the PUMA dataset ranked among the top three in the PUMA Challenge without further optimisation. Furthermore, KongNet established state-of-the-art performance on the publicly available PanNuke and CoNIC datasets. Our results demonstrate that the specialised multi-decoder design is highly effective for nuclei detection and classification across diverse tissue and stain types. The pre-trained model weights along with the inference code have been publicly released to support future research.

We propose FlashAvatar, a novel and lightweight 3D animatable avatar representation that could reconstruct a digital avatar from a short monocular video sequence in minutes and render high-fidelity photo-realistic images at 300FPS on a consumer-grade GPU. To achieve this, we maintain a uniform 3D Gaussian field embedded in the surface of a parametric face model and learn extra spatial offset to model non-surface regions and subtle facial details. While full use of geometric priors can capture high-frequency facial details and preserve exaggerated expressions, proper initialization can help reduce the number of Gaussians, thus enabling super-fast rendering speed. Extensive experimental results demonstrate that FlashAvatar outperforms existing works regarding visual quality and personalized details and is almost an order of magnitude faster in rendering speed. Project page: https://ustc3dv.github.io/FlashAvatar/

Video temporal grounding (VTG) is typically tackled with dataset-specific models that transfer poorly across domains and query styles. Recent efforts to overcome this limitation have adapted large multimodal language models (MLLMs) to VTG, but their high compute cost and limited video context still hinder long-video grounding. We instead scale unified supervision while keeping the model lightweight. We present UniversalVTG, a single VTG model trained with large-scale cross-dataset pretraining. An offline Query Unifier canonicalizes heterogeneous query formats into a shared declarative space, reducing linguistic mismatch and preventing the negative transfer observed under naïve joint training. Combined with an efficient grounding head, UniversalVTG scales to long, untrimmed videos. Across diverse benchmarks-GoalStep-StepGrounding, Ego4D-NLQ, TACoS, Charades-STA, and ActivityNet-Captions-one UniversalVTG checkpoint achieves state-of-the-art performance versus dedicated VTG models. Moreover, despite being >100times smaller than recent MLLM-based approaches, UniversalVTG matches or exceeds their accuracy on multiple benchmarks, offering a practical alternative to parameter-heavy MLLMs.

Reward models (RMs) are a core component in the post-training of large language models (LLMs), serving as proxies for human preference evaluation and guiding model alignment. However, training reliable RMs under limited resources remains challenging due to the reliance on large-scale preference annotations and the high cost of fine-tuning LLMs. To address this, we propose SparseRM, which leverages Sparse Autoencoder (SAE) to extract preference-relevant information encoded in model representations, enabling the construction of a lightweight and interpretable reward model. SparseRM first employs SAE to decompose LLM representations into interpretable directions that capture preference-relevant features. The representations are then projected onto these directions to compute alignment scores, which quantify the strength of each preference feature in the representations. A simple reward head aggregates these scores to predict preference scores. Experiments on three preference modeling tasks show that SparseRM achieves superior performance over most mainstream RMs while using less than 1% of trainable parameters. Moreover, it integrates seamlessly into downstream alignment pipelines, highlighting its potential for efficient alignment.