new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Aug 6

Group Marching Tree: Sampling-Based Approximately Optimal Motion Planning on GPUs

This paper presents a novel approach, named the Group Marching Tree (GMT*) algorithm, to planning on GPUs at rates amenable to application within control loops, allowing planning in real-world settings via repeated computation of near-optimal plans. GMT*, like the Fast Marching Tree (FMT) algorithm, explores the state space with a "lazy" dynamic programming recursion on a set of samples to grow a tree of near-optimal paths. GMT*, however, alters the approach of FMT with approximate dynamic programming by expanding, in parallel, the group of all active samples with cost below an increasing threshold, rather than only the minimum cost sample. This group approximation enables low-level parallelism over the sample set and removes the need for sequential data structures, while the "lazy" collision checking limits thread divergence---all contributing to a very efficient GPU implementation. While this approach incurs some suboptimality, we prove that GMT* remains asymptotically optimal up to a constant multiplicative factor. We show solutions for complex planning problems under differential constraints can be found in ~10 ms on a desktop GPU and ~30 ms on an embedded GPU, representing a significant speed up over the state of the art, with only small losses in performance. Finally, we present a scenario demonstrating the efficacy of planning within the control loop (~100 Hz) towards operating in dynamic, uncertain settings.

  • 3 authors
·
May 4, 2017

Optimizing Operation Recipes with Reinforcement Learning for Safe and Interpretable Control of Chemical Processes

Optimal operation of chemical processes is vital for energy, resource, and cost savings in chemical engineering. The problem of optimal operation can be tackled with reinforcement learning, but traditional reinforcement learning methods face challenges due to hard constraints related to quality and safety that must be strictly satisfied, and the large amount of required training data. Chemical processes often cannot provide sufficient experimental data, and while detailed dynamic models can be an alternative, their complexity makes it computationally intractable to generate the needed data. Optimal control methods, such as model predictive control, also struggle with the complexity of the underlying dynamic models. Consequently, many chemical processes rely on manually defined operation recipes combined with simple linear controllers, leading to suboptimal performance and limited flexibility. In this work, we propose a novel approach that leverages expert knowledge embedded in operation recipes. By using reinforcement learning to optimize the parameters of these recipes and their underlying linear controllers, we achieve an optimized operation recipe. This method requires significantly less data, handles constraints more effectively, and is more interpretable than traditional reinforcement learning methods due to the structured nature of the recipes. We demonstrate the potential of our approach through simulation results of an industrial batch polymerization reactor, showing that it can approach the performance of optimal controllers while addressing the limitations of existing methods.

  • 2 authors
·
Nov 20, 2025

Solving the optimal stopping problem with reinforcement learning: an application in financial option exercise

The optimal stopping problem is a category of decision problems with a specific constrained configuration. It is relevant to various real-world applications such as finance and management. To solve the optimal stopping problem, state-of-the-art algorithms in dynamic programming, such as the least-squares Monte Carlo (LSMC), are employed. This type of algorithm relies on path simulations using only the last price of the underlying asset as a state representation. Also, the LSMC was thinking for option valuation where risk-neutral probabilities can be employed to account for uncertainty. However, the general optimal stopping problem goals may not fit the requirements of the LSMC showing auto-correlated prices. We employ a data-driven method that uses Monte Carlo simulation to train and test artificial neural networks (ANN) to solve the optimal stopping problem. Using ANN to solve decision problems is not entirely new. We propose a different architecture that uses convolutional neural networks (CNN) to deal with the dimensionality problem that arises when we transform the whole history of prices into a Markovian state. We present experiments that indicate that our proposed architecture improves results over the previous implementations under specific simulated time series function sets. Lastly, we employ our proposed method to compare the optimal exercise of the financial options problem with the LSMC algorithm. Our experiments show that our method can capture more accurate exercise opportunities when compared to the LSMC. We have outstandingly higher (above 974\% improvement) expected payoff from these exercise policies under the many Monte Carlo simulations that used the real-world return database on the out-of-sample (test) data.

  • 3 authors
·
Jul 21, 2022

Graph Learning-based Fleet Scheduling for Urban Air Mobility under Operational Constraints, Varying Demand & Uncertainties

This paper develops a graph reinforcement learning approach to online planning of the schedule and destinations of electric aircraft that comprise an urban air mobility (UAM) fleet operating across multiple vertiports. This fleet scheduling problem is formulated to consider time-varying demand, constraints related to vertiport capacity, aircraft capacity and airspace safety guidelines, uncertainties related to take-off delay, weather-induced route closures, and unanticipated aircraft downtime. Collectively, such a formulation presents greater complexity, and potentially increased realism, than in existing UAM fleet planning implementations. To address these complexities, a new policy architecture is constructed, primary components of which include: graph capsule conv-nets for encoding vertiport and aircraft-fleet states both abstracted as graphs; transformer layers encoding time series information on demand and passenger fare; and a Multi-head Attention-based decoder that uses the encoded information to compute the probability of selecting each available destination for an aircraft. Trained with Proximal Policy Optimization, this policy architecture shows significantly better performance in terms of daily averaged profits on unseen test scenarios involving 8 vertiports and 40 aircraft, when compared to a random baseline and genetic algorithm-derived optimal solutions, while being nearly 1000 times faster in execution than the latter.

  • 3 authors
·
Jan 9, 2024

ORMind: A Cognitive-Inspired End-to-End Reasoning Framework for Operations Research

Operations research (OR) is widely deployed to solve critical decision-making problems with complex objectives and constraints, impacting manufacturing, logistics, finance, and healthcare outcomes. While Large Language Models (LLMs) have shown promising results in various domains, their practical application in industry-relevant operations research (OR) problems presents significant challenges and opportunities. Preliminary industrial applications of LLMs for operations research face two critical deployment challenges: 1) Self-correction focuses on code syntax rather than mathematical accuracy, causing costly errors; 2) Complex expert selection creates unpredictable workflows that reduce transparency and increase maintenance costs, making them impractical for time-sensitive business applications. To address these business limitations, we introduce ORMind, a cognitive-inspired framework that enhances optimization through counterfactual reasoning. Our approach emulates human cognition, implementing an end-to-end workflow that systematically transforms requirements into mathematical models and executable solver code. It is currently being tested internally in Lenovo's AI Assistant, with plans to enhance optimization capabilities for both business and consumer customers. Experiments demonstrate that ORMind outperforms existing methods, achieving a 9.5\% improvement on the NL4Opt dataset and a 14.6\% improvement on the ComplexOR dataset.

  • 7 authors
·
Jun 2, 2025

A Reinforcement Learning Method for Environments with Stochastic Variables: Post-Decision Proximal Policy Optimization with Dual Critic Networks

This paper presents Post-Decision Proximal Policy Optimization (PDPPO), a novel variation of the leading deep reinforcement learning method, Proximal Policy Optimization (PPO). The PDPPO state transition process is divided into two steps: a deterministic step resulting in the post-decision state and a stochastic step leading to the next state. Our approach incorporates post-decision states and dual critics to reduce the problem's dimensionality and enhance the accuracy of value function estimation. Lot-sizing is a mixed integer programming problem for which we exemplify such dynamics. The objective of lot-sizing is to optimize production, delivery fulfillment, and inventory levels in uncertain demand and cost parameters. This paper evaluates the performance of PDPPO across various environments and configurations. Notably, PDPPO with a dual critic architecture achieves nearly double the maximum reward of vanilla PPO in specific scenarios, requiring fewer episode iterations and demonstrating faster and more consistent learning across different initializations. On average, PDPPO outperforms PPO in environments with a stochastic component in the state transition. These results support the benefits of using a post-decision state. Integrating this post-decision state in the value function approximation leads to more informed and efficient learning in high-dimensional and stochastic environments.

  • 5 authors
·
Apr 7, 2025

OTC: Optimal Tool Calls via Reinforcement Learning

Tool-integrated reasoning (TIR) augments large language models (LLMs) with the ability to invoke external tools, such as search engines and code interpreters, to solve tasks beyond the capabilities of language-only reasoning. While reinforcement learning (RL) has shown promise in improving TIR by optimizing final answer correctness, existing approaches often overlook the efficiency and cost associated with tool usage. This can lead to suboptimal behavior, including excessive tool calls that increase computational and financial overhead, or insufficient tool use that compromises answer quality. In this work, we propose Optimal Tool Call-controlled Policy Optimization (OTC-PO), a simple yet effective RL-based framework that encourages models to produce accurate answers with minimal tool calls. Our method introduces a tool-integrated reward that jointly considers correctness and tool efficiency, promoting high tool productivity. We instantiate this framework within both Proximal Policy Optimization (PPO) and Group Relative Preference Optimization (GRPO), resulting in OTC-PPO and OTC-GRPO. Experiments with Qwen-2.5 and Qwen-Math across multiple QA benchmarks show that our approach reduces tool calls by up to 73.1\% and improves tool productivity by up to 229.4\%, while maintaining comparable answer accuracy. To the best of our knowledge, this is the first RL-based framework that explicitly optimizes tool-use efficiency in TIR.

  • 10 authors
·
Apr 21, 2025 2

gym-invmgmt: An Open Benchmarking Framework for Inventory Management Methods

Inventory-policy comparisons are often difficult to interpret because performance depends on the evaluation contract as much as on the policy itself. Differences in topology, demand regime, information access, feasibility constraints, shortage treatment, and Key Performance Indicator (KPI) definitions can change method rankings. We present gym-invmgmt, a Gymnasium-compatible extension of the OR-Gym inventory-management lineage for auditable cross-paradigm evaluation. The benchmark evaluates optimization, heuristic, and learned controllers under a shared CoreEnv transition, reward, action-bound, and KPI contract, while varying stress conditions through a 22-scenario core grid plus four supplemental MARL-mode rows. Within these released scenarios, informed stochastic programming provides the strongest non-oracle reference, reflecting the value of scenario hedging under forecast access, but at substantially higher online computational cost. Among learned controllers, the Proximal Policy Optimization Transformer variant (PPO-Transformer) achieves the strongest learned-policy quality at fast inference, while Residual Reinforcement Learning (Residual RL) provides competitive hybrid performance. The graph neural network variant (PPO-GNN) is highly competitive on the default divergent topology but less robust on the serial topology. Imitation learning performs well in stationary regimes but degrades under demand shift, and the bounded Large Language Model (LLM) policy-parameter baseline is best interpreted as a diagnostic controller rather than an autonomous inventory optimizer. Overall, the benchmark identifies scenario-conditioned leaders while showing that performance depends jointly on information access, demand shift, topology, and policy representation.

  • 2 authors
·
May 11

V_0: A Generalist Value Model for Any Policy at State Zero

Policy gradient methods rely on a baseline to measure the relative advantage of an action, ensuring the model reinforces behaviors that outperform its current average capability. In the training of Large Language Models (LLMs) using Actor-Critic methods (e.g., PPO), this baseline is typically estimated by a Value Model (Critic) often as large as the policy model itself. However, as the policy continuously evolves, the value model requires expensive, synchronous incremental training to accurately track the shifting capabilities of the policy. To avoid this overhead, Group Relative Policy Optimization (GRPO) eliminates the coupled value model by using the average reward of a group of rollouts as the baseline; yet, this approach necessitates extensive sampling to maintain estimation stability. In this paper, we propose V_0, a Generalist Value Model capable of estimating the expected performance of any model on unseen prompts without requiring parameter updates. We reframe value estimation by treating the policy's dynamic capability as an explicit context input; specifically, we leverage a history of instruction-performance pairs to dynamically profile the model, departing from the traditional paradigm that relies on parameter fitting to perceive capability shifts. Focusing on value estimation at State Zero (i.e., the initial prompt, hence V_0), our model serves as a critical resource scheduler. During GRPO training, V_0 predicts success rates prior to rollout, allowing for efficient sampling budget allocation; during deployment, it functions as a router, dispatching instructions to the most cost-effective and suitable model. Empirical results demonstrate that V_0 significantly outperforms heuristic budget allocation and achieves a Pareto-optimal trade-off between performance and cost in LLM routing tasks.

  • 9 authors
·
Feb 3

Automated Optimization Modeling through Expert-Guided Large Language Model Reasoning

Optimization Modeling (OM) is essential for solving complex decision-making problems. However, the process remains time-consuming and error-prone, heavily relying on domain experts. While Large Language Models (LLMs) show promise in addressing these challenges through their natural language understanding and reasoning capabilities, current approaches face three critical limitations: high benchmark labeling error rates reaching up to 42%, narrow evaluation scope that only considers optimal values, and computational inefficiency due to heavy reliance on multi-agent systems or model fine-tuning. In this work, we first enhance existing datasets through systematic error correction and more comprehensive annotation. Additionally, we introduce LogiOR, a new optimization modeling benchmark from the logistics domain, containing more complex problems with standardized annotations. Furthermore, we present ORThought, a novel framework that leverages expert-level optimization modeling principles through chain-of-thought reasoning to automate the OM process. Through extensive empirical evaluation, we demonstrate that ORThought outperforms existing approaches, including multi-agent frameworks, with particularly significant advantages on complex optimization problems. Finally, we provide a systematic analysis of our method, identifying critical success factors and failure modes, providing valuable insights for future research on LLM-based optimization modeling.

  • 5 authors
·
Aug 20, 2025

Knapsack RL: Unlocking Exploration of LLMs via Optimizing Budget Allocation

Large Language Models (LLMs) can self-improve through reinforcement learning, where they generate trajectories to explore and discover better solutions. However, this exploration process is computationally expensive, often forcing current methods to assign limited exploration budgets to each task. This uniform allocation creates problematic edge cases: easy tasks consistently succeed while difficult tasks consistently fail, both producing zero gradients during training updates for the widely used Group Relative Policy Optimization (GRPO). We address this problem from the lens of exploration budget allocation. Viewing each task's exploration as an "item" with a distinct "value" and "cost", we establish a connection to the classical knapsack problem. This formulation allows us to derive an optimal assignment rule that adaptively distributes resources based on the model's current learning status. When applied to GRPO, our method increases the effective ratio of non-zero policy gradients by 20-40% during training. Acting as a computational "free lunch", our approach could reallocate exploration budgets from tasks where learning is saturated to those where it is most impactful. This enables significantly larger budgets (e.g., 93 rollouts) for especially challenging problems, which would be computationally prohibitive under a uniform allocation. These improvements translate to meaningful gains on mathematical reasoning benchmarks, with average improvements of 2-4 points and peak gains of 9 points on specific tasks. Notably, achieving comparable performance with traditional homogeneous allocation would require about 2x the computational resources.

ByteDance-Seed ByteDance Seed
·
Sep 30, 2025 2

Online Flow Time Minimization with Gradually Revealed Jobs

We consider the problem of online preemptive scheduling on a single machine to minimize the total flow time. In clairvoyant scheduling, where job processing times are revealed upon arrival, the Shortest Remaining Processing Time (SRPT) algorithm is optimal. In practice, however, exact processing times are often unknown. At the opposite extreme, non-clairvoyant scheduling, in which processing times are revealed only upon completion, suffers from strong lower bounds on the competitive ratio. This motivates the study of intermediate information models. We introduce a new model in which processing times are revealed gradually during execution. Each job consists of a sequence of operations, and the processing time of an operation becomes known only after the preceding one completes. This models many scheduling scenarios that arise in computing systems. Our main result is a deterministic O(m^2)-competitive algorithm, where m is the maximum number of operations per job. More specifically, we prove a refined competitive ratio in O(m_1 cdot m_2), where m_1 and m_2 are instance-dependent parameters describing the operation size structure. Our algorithm and analysis build on recent advancements in robust flow time minimization (SODA '26), where jobs arrive with estimated sizes. However, in our setting we have no bounded estimate on a job's processing time. Thus, we design a highly adaptive algorithm that gradually explores a job's operations while working on them, and groups them into virtual chunks whose size can be well-estimated. This is a crucial ingredient of our result and requires a much more careful analysis compared to the robust setting. We also provide lower bounds showing that our bounds are essentially best possible. For the special case of scheduling with uniform obligatory tests, we show that SRPT at the operation level is 2-competitive, which is best possible.

  • 4 authors
·
Feb 13

β-OPSD: Deriving with Policy Optimization, Training with Self-Distillation

On-policy self-distillation (OPSD) is a promising approach to improve reasoning language models, but it remains brittle in practice: making it work reliably often requires substantial engineering effort. We identify a structural source of this difficulty: vanilla OPSD is precisely the β=1 member of a broader policy-optimization family, where β weights the KL penalty anchoring the student to a reference policy. This equivalence turns β from an implicit value fixed at one into a controllable regularization parameter, yielding a more general formulation that trades off proximity to a reference policy against privileged teacher guidance. We introduce β-OPSD and derive its optimal policy as a geometric interpolation between the reference policy and the privileged teacher. Directly optimizing this objective with reinforcement learning, however, would be costly and high-variance. Rather than optimize the RL objective directly, we turn its closed-form solution into a distillation target. Each value of β selects a target along the reference-to-teacher path, which we implement efficiently by mixing their token-level logits. In this way, inexpensive distillation approximates the solution of expensive policy optimization. Return-to-go credit assignment further aligns token updates with the sequence-level objective while retaining the simplicity of OPSD. Experiments on mathematical reasoning benchmarks show that β-OPSD consistently outperforms vanilla OPSD, improving optimization stability and downstream reasoning performance. Our results provide a principled route from self-distillation to policy optimization and back without sacrificing the efficiency that makes OPSD practical.

Density-Driven Optimal Control for Non-Uniform Area Coverage in Decentralized Multi-Agent Systems Using Optimal Transport

This paper addresses the fundamental problem of non-uniform area coverage in multi-agent systems, where different regions require varying levels of attention due to mission-dependent priorities. Existing uniform coverage strategies are insufficient for realistic applications, and many non-uniform approaches either lack optimality guarantees or fail to incorporate crucial real-world constraints such as agent dynamics, limited operation time, the number of agents, and decentralized execution. To resolve these limitations, we propose a novel framework called Density-Driven Optimal Control (D2OC). The central idea of D2OC is the integration of optimal transport theory with multi-agent coverage control, enabling each agent to continuously adjust its trajectory to match a mission-specific reference density map. The proposed formulation establishes optimality by solving a constrained optimization problem that explicitly incorporates physical and operational constraints. The resulting control input is analytically derived from the Lagrangian of the objective function, yielding closed-form optimal solutions for linear systems and a generalizable structure for nonlinear systems. Furthermore, a decentralized data-sharing mechanism is developed to coordinate agents without reliance on global information. Comprehensive simulation studies demonstrate that D2OC achieves significantly improved non-uniform area coverage performance compared to existing methods, while maintaining scalability and decentralized implementability.

  • 2 authors
·
Nov 16, 2025 1

Pretty darn good control: when are approximate solutions better than approximate models

Existing methods for optimal control struggle to deal with the complexity commonly encountered in real-world systems, including dimensionality, process error, model bias and data heterogeneity. Instead of tackling these system complexities directly, researchers have typically sought to simplify models to fit optimal control methods. But when is the optimal solution to an approximate, stylized model better than an approximate solution to a more accurate model? While this question has largely gone unanswered owing to the difficulty of finding even approximate solutions for complex models, recent algorithmic and computational advances in deep reinforcement learning (DRL) might finally allow us to address these questions. DRL methods have to date been applied primarily in the context of games or robotic mechanics, which operate under precisely known rules. Here, we demonstrate the ability for DRL algorithms using deep neural networks to successfully approximate solutions (the "policy function" or control rule) in a non-linear three-variable model for a fishery without knowing or ever attempting to infer a model for the process itself. We find that the reinforcement learning agent discovers an effective simplification of the problem to obtain an interpretable control rule. We show that the policy obtained with DRL is both more profitable and more sustainable than any constant mortality policy -- the standard family of policies considered in fishery management.

  • 5 authors
·
Aug 25, 2023

The Best of Many Worlds: Dual Mirror Descent for Online Allocation Problems

Online allocation problems with resource constraints are central problems in revenue management and online advertising. In these problems, requests arrive sequentially during a finite horizon and, for each request, a decision maker needs to choose an action that consumes a certain amount of resources and generates reward. The objective is to maximize cumulative rewards subject to a constraint on the total consumption of resources. In this paper, we consider a data-driven setting in which the reward and resource consumption of each request are generated using an input model that is unknown to the decision maker. We design a general class of algorithms that attain good performance in various input models without knowing which type of input they are facing. In particular, our algorithms are asymptotically optimal under independent and identically distributed inputs as well as various non-stationary stochastic input models, and they attain an asymptotically optimal fixed competitive ratio when the input is adversarial. Our algorithms operate in the Lagrangian dual space: they maintain a dual multiplier for each resource that is updated using online mirror descent. By choosing the reference function accordingly, we recover the dual sub-gradient descent and dual multiplicative weights update algorithm. The resulting algorithms are simple, fast, and do not require convexity in the revenue function, consumption function and action space, in contrast to existing methods for online allocation problems. We discuss applications to network revenue management, online bidding in repeated auctions with budget constraints, online proportional matching with high entropy, and personalized assortment optimization with limited inventory.

  • 3 authors
·
Nov 4, 2021

When Does q-error Predict Plan Regret? Three Regimes of Cardinality-Estimation Error

Cardinality-estimation (CE) research ranks estimators by q-error, yet it is well known that q-error is an imperfect proxy for query-plan quality. We give a measurement-driven account of when it is a good proxy and when it is not, and why. Modeling plan selection as an argmin over a piecewise-linear cost landscape, we find that plan regret (the cost of the chosen plan relative to the optimal, under true cardinalities) is governed by plan-cost geometry in a regime-dependent way. (i) For small errors, a true-point condition number kappa predicts regret and out-predicts q-error; its predictive power decays to zero as error grows, as a local linearization must. (ii) For large errors -- where deployed learned estimators operate -- an estimator-independent average-case sub-optimality measure ACS-infinity predicts which queries are regret-prone (Spearman rho ~ 0.54 on STATS-CEB), while q-error is nearly uninformative at the query level (rho ~ 0.05). (iii) The worst case is Haritsa's maximum sub-optimality (MSO). The three are one cost-ratio spectrum under three weightings. We prove a limit law ACS-infinity = sum_k r_k pi_k with cardinality-independent combinatorial weights, and validate every claim on STATS-CEB and JOB-light with four released estimators under pre-registered decision rules, and confirm on real PostgreSQL runtime that ACS-infinity predicts regret where q-error does not. The contribution is conceptual and empirical -- an average-case companion to worst-case robust query optimization, and a characterization of when an accuracy metric tracks plan quality -- rather than a new estimator. Code and the full pre-registration are public.

  • 2 authors
·
Jun 13

Refining Graphical Neural Network Predictions Using Flow Matching for Optimal Power Flow with Constraint-Satisfaction Guarantee

The DC Optimal Power Flow (DC-OPF) problem is fundamental to power system operations, requiring rapid solutions for real-time grid management. While traditional optimization solvers provide optimal solutions, their computational cost becomes prohibitive for large-scale systems requiring frequent recalculations. Machine learning approaches offer promise for acceleration but often struggle with constraint satisfaction and cost optimality. We present a novel two-stage learning framework that combines physics-informed Graph Neural Networks (GNNs) with Continuous Flow Matching (CFM) for solving DC-OPF problems. Our approach embeds fundamental physical principles--including economic dispatch optimality conditions, Kirchhoff's laws, and Karush-Kuhn-Tucker (KKT) complementarity conditions--directly into the training objectives. The first stage trains a GNN to produce feasible initial solutions by learning from physics-informed losses that encode power system constraints. The second stage employs CFM, a simulation-free continuous normalizing flow technique, to refine these solutions toward optimality through learned vector field regression. Evaluated on the IEEE 30-bus system across five load scenarios ranging from 70\% to 130\% nominal load, our method achieves near-optimal solutions with cost gaps below 0.1\% for nominal loads and below 3\% for extreme conditions, while maintaining 100\% feasibility. Our framework bridges the gap between fast but approximate neural network predictions and optimal but slow numerical solvers, offering a practical solution for modern power systems with high renewable penetration requiring frequent dispatch updates.

  • 1 authors
·
Dec 11, 2025

Stochastic-Robust Planning of Networked Hydrogen-Electrical Microgrids: A Study on Induced Refueling Demand

Hydrogen-electrical microgrids are increasingly assuming an important role on the pathway toward decarbonization of energy and transportation systems. This paper studies networked hydrogen-electrical microgrids planning (NHEMP), considering a critical but often-overlooked issue, i.e., the demand-inducing effect (DIE) associated with infrastructure development decisions. Specifically, higher refueling capacities will attract more refueling demand of hydrogen-powered vehicles (HVs). To capture such interactions between investment decisions and induced refueling demand, we introduce a decision-dependent uncertainty (DDU) set and build a trilevel stochastic-robust formulation. The upper-level determines optimal investment strategies for hydrogen-electrical microgrids, the lower-level optimizes the risk-aware operation schedules across a series of stochastic scenarios, and, for each scenario, the middle-level identifies the "worst" situation of refueling demand within an individual DDU set to ensure economic feasibility. Then, an adaptive and exact decomposition algorithm, based on Parametric Column-and-Constraint Generation (PC&CG), is customized and developed to address the computational challenge and to quantitatively analyze the impact of DIE. Case studies on an IEEE exemplary system validate the effectiveness of the proposed NHEMP model and the PC&CG algorithm. It is worth highlighting that DIE can make an important contribution to the economic benefits of NHEMP, yet its significance will gradually decrease when the main bottleneck transits to other system restrictions.

  • 6 authors
·
Mar 31, 2024

Offline Guarded Safe Reinforcement Learning for Medical Treatment Optimization Strategies

When applying offline reinforcement learning (RL) in healthcare scenarios, the out-of-distribution (OOD) issues pose significant risks, as inappropriate generalization beyond clinical expertise can result in potentially harmful recommendations. While existing methods like conservative Q-learning (CQL) attempt to address the OOD issue, their effectiveness is limited by only constraining action selection by suppressing uncertain actions. This action-only regularization imitates clinician actions that prioritize short-term rewards, but it fails to regulate downstream state trajectories, thereby limiting the discovery of improved long-term treatment strategies. To safely improve policy beyond clinician recommendations while ensuring that state-action trajectories remain in-distribution, we propose Offline Guarded Safe Reinforcement Learning (OGSRL), a theoretically grounded model-based offline RL framework. OGSRL introduces a novel dual constraint mechanism for improving policy with reliability and safety. First, the OOD guardian is established to specify clinically validated regions for safe policy exploration. By constraining optimization within these regions, it enables the reliable exploration of treatment strategies that outperform clinician behavior by leveraging the full patient state history, without drifting into unsupported state-action trajectories. Second, we introduce a safety cost constraint that encodes medical knowledge about physiological safety boundaries, providing domain-specific safeguards even in areas where training data might contain potentially unsafe interventions. Notably, we provide theoretical guarantees on safety and near-optimality: policies that satisfy these constraints remain in safe and reliable regions and achieve performance close to the best possible policy supported by the data.

  • 6 authors
·
May 22, 2025

Memory as a Wasting Asset: Pricing Flash Endurance for Embodied Agents, and the Limits of Doing So

A robot's flash endurance is a non-renewable stock: every persisted write spends one of a few thousand program/erase cycles and never refills, yet no fielded robot memory system prices which memories are worth an erase cycle. We treat embodied memory as depreciating capital and price that stock with a single endurance shadow price η, which makes cost-minimizing placement across a RAM / on-board NVM / cloud hierarchy a threshold in a wear-augmented per-byte index. The index is cost-optimal whatever the sign of the value-write association χ; only when χ> 0 does the optimum turn non-monotone, sending a robot's most valuable memories off its flash. The pivot is thus empirical, and we measure χ on real robot logs at a pre-specified gate: its sign is a property of the deployment regime -- positive on recurrent long-horizon manipulation (hatχ approx +1.0 times 10^{-3}, replicated at full power), null on a shorter-horizon suite, and negative on non-recurrent teleoperation. Two boundaries scope the result. The endurance budget is dormant on premium 3,000-P/E TLC at datasheet prices and binding on the commodity QLC/eMMC (sim1,000 P/E) that cheaper edge robots run. And where it binds, a learned wear-aware controller only ties price-based routing on task value, because realized value is tier-invariant across RAM, NVM, and cloud: the rent governs device lifetime and cost, not task performance. Whether wear-aware placement improves task value remains open -- χ is measured against a value proxy, and the non-monotone optimum, while proven, is not yet observed in data.

  • 1 authors
·
Jun 15

Informed RRT*: Optimal Sampling-based Path Planning Focused via Direct Sampling of an Admissible Ellipsoidal Heuristic

Rapidly-exploring random trees (RRTs) are popular in motion planning because they find solutions efficiently to single-query problems. Optimal RRTs (RRT*s) extend RRTs to the problem of finding the optimal solution, but in doing so asymptotically find the optimal path from the initial state to every state in the planning domain. This behaviour is not only inefficient but also inconsistent with their single-query nature. For problems seeking to minimize path length, the subset of states that can improve a solution can be described by a prolate hyperspheroid. We show that unless this subset is sampled directly, the probability of improving a solution becomes arbitrarily small in large worlds or high state dimensions. In this paper, we present an exact method to focus the search by directly sampling this subset. The advantages of the presented sampling technique are demonstrated with a new algorithm, Informed RRT*. This method retains the same probabilistic guarantees on completeness and optimality as RRT* while improving the convergence rate and final solution quality. We present the algorithm as a simple modification to RRT* that could be further extended by more advanced path-planning algorithms. We show experimentally that it outperforms RRT* in rate of convergence, final solution cost, and ability to find difficult passages while demonstrating less dependence on the state dimension and range of the planning problem.

  • 3 authors
·
Nov 27, 2014

A Tale of Two Problems: Multi-Task Bilevel Learning Meets Equality Constrained Multi-Objective Optimization

In recent years, bilevel optimization (BLO) has attracted significant attention for its broad applications in machine learning. However, most existing works on BLO remain confined to the single-task setting and rely on the lower-level strong convexity assumption, which significantly restricts their applicability to modern machine learning problems of growing complexity. In this paper, we make the first attempt to extend BLO to the multi-task setting under a relaxed lower-level general convexity (LLGC) assumption. To this end, we reformulate the multi-task bilevel learning (MTBL) problem with LLGC into an equality constrained multi-objective optimization (ECMO) problem. However, ECMO itself is a new problem that has not yet been studied in the literature. To address this gap, we first establish a new Karush-Kuhn-Tucker (KKT)-based Pareto stationarity as the convergence criterion for ECMO algorithm design. Based on this foundation, we propose a weighted Chebyshev (WC)-penalty algorithm that achieves a finite-time convergence rate of O(ST^{-1{2}) to KKT-based Pareto stationarity in both deterministic and stochastic settings, where S denotes the number of objectives, and T is the total iterations. Moreover, by varying the preference vector over the S-dimensional simplex, our WC-penalty method systematically explores the Pareto front. Finally, solutions to the ECMO problem translate directly into solutions for the original MTBL problem, thereby closing the loop between these two foundational optimization frameworks.

  • 6 authors
·
May 13

Provably Data-driven Lagrangian Relaxation for Mixed Integer Linear Programming

Lagrangian Relaxation (LR) is a powerful technique for solving large-scale Mixed Integer Linear Programming (MILP), particularly those with decomposable structures, such as vehicle routing or unit commitment problems. By relaxing the coupling constraints, LR enables parallel subproblem solving and often yields tighter dual bounds than standard linear programming relaxations, which is crucial for efficient branch-and-bound pruning. While recent empirical work has shown promising results using machine learning to predict these multipliers, a theoretical understanding of such methods remains an open question. In this work, we bridge this gap by analyzing the problem of learning LR through the lens of Data-driven Algorithm Design, i.e., a statistical learning problem over a distribution of problem instances. Our contributions are as follows: first, we derive a generalization bound of O(s^{1.5}/N) for the learned multipliers, where s is the number of coupling constraints and N is the sample size. Second, we provide a minimax lower-bound of Ω(s/N), proving that a linear dependency is unavoidable. Third, we constructively close this theoretical gap by proving that Stochastic Gradient Ascent (SGA) with averaging achieves the minimax optimal rate Θ(s/N). Finally, we extend our framework to the learning-to-warm-start setting, proving that it achieves a fast, minimax-optimal rate of Θ(s/N) and establishing a theoretical advantage over direct multiplier prediction.

  • 3 authors
·
May 24

Constraint-Aware Execution Planning for Hybrid Space-Ground Compute Workloads

Low Earth orbit (LEO) satellites increasingly carry compute hardware capable of on-board processing, yet each satellite generates roughly two orders of magnitude more data than it can downlink per orbit. This mismatch forces operators to decide, for every workload, which computation runs on-board and which runs on the ground, how intermediate data crosses the space-ground boundary through narrow contact windows, and how to maintain delivery guarantees over noisy channels. We present Constraint-Aware Execution (CAE), a planning system that takes a satellite identifier, a workload expressed as a directed acyclic graph of processing steps, and a set of orbital and resource constraints, and produces a deterministic, physically grounded execution plan. CAE operates in four phases: (1) orbital environment construction via SGP4 propagation with eclipse detection and ground station pass prediction, (2) compute placement using a cost model that compares on-board resource consumption against transfer overhead, (3) transfer insertion with adaptive forward error correction and security overhead modeling, and (4) greedy first-fit scheduling into orbital windows under power, thermal, compute, and communication constraints. We evaluate CAE against five representative workload patterns across satellites in distinct orbital regimes and demonstrate that the system produces feasible plans in under two seconds, correctly exploits onboard data reduction to minimize transfer volume, and adapts FEC and multi-pass allocation to varying channel conditions. CAE is deployed as a production API computing plans for any cataloged satellite using live two-line element data.

  • 1 authors
·
Mar 3

APEX: An Extensible and Dynamism-Aware Simulator for Automated Parallel Execution in LLM Serving

Efficiently serving Large Language Models (LLMs) requires selecting an optimal parallel execution plan, balancing computation, memory, and communication overhead. However, determining the best strategy is challenging due to varying parallelism techniques (data, pipeline, tensor) and workload characteristics (e.g., compute-intensive tasks with long prompts vs. memory-intensive tasks with long generation). We propose APEX, an LLM serving system simulator that efficiently identifies optimal parallel execution plans by considering key factors of LLM serving systems, such as memory usage, batching behavior, etc. APEX performs dynamism-aware simulation to model iteration-level batching, and leverages LLMs' repetitive structure to reduce design space, scaling efficiently to trillion-scale models. APEX abstracts the key components of LLM serving systems, including the model, batching module, quantization formats, and device clusters, enabling the simulator to be general and extensible. Simulating on a CPU, APEX evaluates execution plans for various device clusters, covering diverse LLMs and workloads. APEX finds plans up to 3.37x faster than heuristics, and also plans that reduce energy consumption by up to 45% compared to latency-optimal plans. APEX performs comprehensive evaluations, reporting key system metrics like time per output token and time to first token, which can help service providers meet SLOs. APEX identifies an optimal plan within 15 minutes on a CPU, making it 71x faster and 1234x more cost-effective than cloud-based GPU deployment. APEX can be accessed at https://github.com/microsoft/apex_plus

  • 4 authors
·
Nov 26, 2024

Operational Control of a Multi-energy District Heating System: Comparison of Model-Predictive Control and Rule-Based Control

This study focuses on operational control strategies for a multi-energy District Heating Network (DHN). Two control strategies are investigated and compared: (i) a reactive rule-based control (RBC) and (ii) a model predictive control (MPC). For the purpose of the study a small scale district heating network is modelled using Modelica. The production plant combines a heat pump, a gas boiler and a thermal solar field on the production side with a storage tank for flexibility purposes. On the consumption side, the virtual buildings are aggregated into a single consumer. We use our co-simulation and control platform, called Pegase, to implement the studied strategies. For both strategies the goal is to meet the consumers' demand while satisfying technical constraints. In addition MPC has the objective to minimize the operational costs, taking into account variable electricity prices and availability of solar thermal resource. Different scenarios are also defined and compared to study the effect of the heat plant sizing and forecasting error. The operational cost is reduced when switching from RBC to a MPC. As can be expected, MPC is more efficient when dealing with variable energy costs, intermittent solar energy and storage capabilities. This study also demonstrates how our tools enable an easy coupling of Modelica-based simulation with various control strategies. It especially supports the implementation and validation of complex MPC strategies in an efficient way, and yearly simulations are performed within 20 minutes.

  • 4 authors
·
Jun 17, 2025

Bandits with Knapsacks

Multi-armed bandit problems are the predominant theoretical model of exploration-exploitation tradeoffs in learning, and they have countless applications ranging from medical trials, to communication networks, to Web search and advertising. In many of these application domains the learner may be constrained by one or more supply (or budget) limits, in addition to the customary limitation on the time horizon. The literature lacks a general model encompassing these sorts of problems. We introduce such a model, called "bandits with knapsacks", that combines aspects of stochastic integer programming with online learning. A distinctive feature of our problem, in comparison to the existing regret-minimization literature, is that the optimal policy for a given latent distribution may significantly outperform the policy that plays the optimal fixed arm. Consequently, achieving sublinear regret in the bandits-with-knapsacks problem is significantly more challenging than in conventional bandit problems. We present two algorithms whose reward is close to the information-theoretic optimum: one is based on a novel "balanced exploration" paradigm, while the other is a primal-dual algorithm that uses multiplicative updates. Further, we prove that the regret achieved by both algorithms is optimal up to polylogarithmic factors. We illustrate the generality of the problem by presenting applications in a number of different domains including electronic commerce, routing, and scheduling. As one example of a concrete application, we consider the problem of dynamic posted pricing with limited supply and obtain the first algorithm whose regret, with respect to the optimal dynamic policy, is sublinear in the supply.

  • 3 authors
·
Sep 4, 2017

Truncated Proximal Policy Optimization

Recently, test-time scaling Large Language Models (LLMs) have demonstrated exceptional reasoning capabilities across scientific and professional tasks by generating long chains-of-thought (CoT). As a crucial component for developing these reasoning models, reinforcement learning (RL), exemplified by Proximal Policy Optimization (PPO) and its variants, allows models to learn through trial and error. However, PPO can be time-consuming due to its inherent on-policy nature, which is further exacerbated by increasing response lengths. In this work, we propose Truncated Proximal Policy Optimization (T-PPO), a novel extension to PPO that improves training efficiency by streamlining policy update and length-restricted response generation. T-PPO mitigates the issue of low hardware utilization, an inherent drawback of fully synchronized long-generation procedures, where resources often sit idle during the waiting periods for complete rollouts. Our contributions are two-folds. First, we propose Extended Generalized Advantage Estimation (EGAE) for advantage estimation derived from incomplete responses while maintaining the integrity of policy learning. Second, we devise a computationally optimized mechanism that allows for the independent optimization of the policy and value models. By selectively filtering prompt and truncated tokens, this mechanism reduces redundant computations and accelerates the training process without sacrificing convergence performance. We demonstrate the effectiveness and efficacy of T-PPO on AIME 2024 with a 32B base model. The experimental results show that T-PPO improves the training efficiency of reasoning LLMs by up to 2.5x and outperforms its existing competitors.

  • 23 authors
·
Jun 17, 2025 2

JADE: Bridging the Strategic-Operational Gap in Dynamic Agentic RAG

The evolution of Retrieval-Augmented Generation (RAG) has shifted from static retrieval pipelines to dynamic, agentic workflows where a central planner orchestrates multi-turn reasoning. However, existing paradigms face a critical dichotomy: they either optimize modules jointly within rigid, fixed-graph architectures, or empower dynamic planning while treating executors as frozen, black-box tools. We identify that this decoupled optimization creates a ``strategic-operational mismatch,'' where sophisticated planning strategies fail to materialize due to unadapted local executors, often leading to negative performance gains despite increased system complexity. In this paper, we propose JADE (Joint Agentic Dynamic Execution), a unified framework for the joint optimization of planning and execution within dynamic, multi-turn workflows. By modeling the system as a cooperative multi-agent team unified under a single shared backbone, JADE enables end-to-end learning driven by outcome-based rewards. This approach facilitates co-adaptation: the planner learns to operate within the capability boundaries of the executors, while the executors evolve to align with high-level strategic intent. Empirical results demonstrate that JADE transforms disjoint modules into a synergistic system, yielding remarkable performance improvements via joint optimization and enabling a flexible balance between efficiency and effectiveness through dynamic workflow orchestration.

  • 11 authors
·
Jan 28

LLM+P: Empowering Large Language Models with Optimal Planning Proficiency

Large language models (LLMs) have demonstrated remarkable zero-shot generalization abilities: state-of-the-art chatbots can provide plausible answers to many common questions that arise in daily life. However, so far, LLMs cannot reliably solve long-horizon planning problems. By contrast, classical planners, once a problem is given in a formatted way, can use efficient search algorithms to quickly identify correct, or even optimal, plans. In an effort to get the best of both worlds, this paper introduces LLM+P, the first framework that incorporates the strengths of classical planners into LLMs. LLM+P takes in a natural language description of a planning problem, then returns a correct (or optimal) plan for solving that problem in natural language. LLM+P does so by first converting the language description into a file written in the planning domain definition language (PDDL), then leveraging classical planners to quickly find a solution, and then translating the found solution back into natural language. Along with LLM+P, we define a diverse set of different benchmark problems taken from common planning scenarios. Via a comprehensive set of experiments on these benchmark problems, we find that LLM+P is able to provide optimal solutions for most problems, while LLMs fail to provide even feasible plans for most problems.\footnote{The code and results are publicly available at https://github.com/Cranial-XIX/llm-pddl.git.

  • 7 authors
·
Apr 22, 2023 2

The Role of Vertex Consistency in Sampling-based Algorithms for Optimal Motion Planning

Motion planning problems have been studied by both the robotics and the controls research communities for a long time, and many algorithms have been developed for their solution. Among them, incremental sampling-based motion planning algorithms, such as the Rapidly-exploring Random Trees (RRTs), and the Probabilistic Road Maps (PRMs) have become very popular recently, owing to their implementation simplicity and their advantages in handling high-dimensional problems. Although these algorithms work very well in practice, the quality of the computed solution is often not good, i.e., the solution can be far from the optimal one. A recent variation of RRT, namely the RRT* algorithm, bypasses this drawback of the traditional RRT algorithm, by ensuring asymptotic optimality as the number of samples tends to infinity. Nonetheless, the convergence rate to the optimal solution may still be slow. This paper presents a new incremental sampling-based motion planning algorithm based on Rapidly-exploring Random Graphs (RRG), denoted RRT# (RRT "sharp") which also guarantees asymptotic optimality but, in addition, it also ensures that the constructed spanning tree of the geometric graph is consistent after each iteration. In consistent trees, the vertices which have the potential to be part of the optimal solution have the minimum cost-come-value. This implies that the best possible solution is readily computed if there are some vertices in the current graph that are already in the goal region. Numerical results compare with the RRT* algorithm.

  • 2 authors
·
Apr 28, 2012

ToMPO: Training LLM Strategic Decision Making from a Multi-Agent Perspective

Large Language Models (LLMs) have been used to make decisions in complex scenarios, where they need models to think deeply, reason logically, and decide wisely. Many existing studies focus solely on multi-round conversations in social tasks or simulated environments, neglecting the various types of decisions and their interdependence. Current reinforcement learning methods struggle to consider the strategies of others during training. To address these issues, we first define a strategic decision-making problem that includes two types of decisions and their temporal dependencies. Furthermore, we propose **T**heory **o**f **M**ind **P**olicy **O**ptimization **(ToMPO)** algorithm to optimize the perception of other individual strategies and the game situation trends. Compared to the Group Relative Policy Optimization (GRPO) algorithm, ToMPO enhances the LLM's strategic decision-making mainly by: 1) generating rollouts based on reasoning the strategies of other individuals, 2) estimating advantages at both the graph-level and sample-level, and 3) balancing global and partial rewards. The ToMPO algorithm outperforms the GRPO method by 35% in terms of model output compliance and cooperative outcomes. Additionally, when compared to models with parameter sizes 100 times larger, it shows an 18% improvement. This demonstrates the effectiveness of the ToMPO algorithm in enhancing the model's strategic decision-making capabilities.

  • 5 authors
·
Sep 24, 2025

A Provably Efficient Sample Collection Strategy for Reinforcement Learning

One of the challenges in online reinforcement learning (RL) is that the agent needs to trade off the exploration of the environment and the exploitation of the samples to optimize its behavior. Whether we optimize for regret, sample complexity, state-space coverage or model estimation, we need to strike a different exploration-exploitation trade-off. In this paper, we propose to tackle the exploration-exploitation problem following a decoupled approach composed of: 1) An "objective-specific" algorithm that (adaptively) prescribes how many samples to collect at which states, as if it has access to a generative model (i.e., a simulator of the environment); 2) An "objective-agnostic" sample collection exploration strategy responsible for generating the prescribed samples as fast as possible. Building on recent methods for exploration in the stochastic shortest path problem, we first provide an algorithm that, given as input the number of samples b(s,a) needed in each state-action pair, requires O(B D + D^{3/2} S^2 A) time steps to collect the B=sum_{s,a} b(s,a) desired samples, in any unknown communicating MDP with S states, A actions and diameter D. Then we show how this general-purpose exploration algorithm can be paired with "objective-specific" strategies that prescribe the sample requirements to tackle a variety of settings -- e.g., model estimation, sparse reward discovery, goal-free cost-free exploration in communicating MDPs -- for which we obtain improved or novel sample complexity guarantees.

  • 4 authors
·
Jul 13, 2020

Distribution-Centric Policy Optimization Dominates Exploration-Exploitation Trade-off

The exploration-exploitation (EE) trade-off is a central challenge in reinforcement learning (RL) for large language models (LLMs). With Group Relative Policy Optimization (GRPO), training tends to be exploitation driven: entropy decreases monotonically, samples convergence, and exploration fades. Most existing fixes are sample-centric: they seek or bonus rare samples, assuming exploration comes from novel trajectories and tokens. These heuristics depend on the "luck" of informative samples, lack principled control of the policy, and often yield limited or inconsistent gains. In this work, we are the first to introduce a distribution-centric perspective for RL, in which exploration is always guided by a "better" target distribution, and reveal that a policy's ability to resist entropy collapse is governed by the distribution itself rather than individual samples. Building on this insight, we propose Distribution-Centric Policy Optimization (DCPO), which reformulates entropy regulation as distribution-level regularization. DCPO achieves controllable entropy fully on-policy without sampling from external distributions, enabling efficient exploration while maintaining training stability. Across multiple models and seven benchmarks, DCPO improves over GRPO by about 20\% on average. Overall, DCPO replaces sample-level heuristics with distribution-level principles, offering a theoretically grounded and flexible framework for controllable exploration and a stronger EE trade-off. The code is available in https://github.com/597358816/DCPO.

  • 7 authors
·
Jan 19

Real-Time Bidding by Reinforcement Learning in Display Advertising

The majority of online display ads are served through real-time bidding (RTB) --- each ad display impression is auctioned off in real-time when it is just being generated from a user visit. To place an ad automatically and optimally, it is critical for advertisers to devise a learning algorithm to cleverly bid an ad impression in real-time. Most previous works consider the bid decision as a static optimization problem of either treating the value of each impression independently or setting a bid price to each segment of ad volume. However, the bidding for a given ad campaign would repeatedly happen during its life span before the budget runs out. As such, each bid is strategically correlated by the constrained budget and the overall effectiveness of the campaign (e.g., the rewards from generated clicks), which is only observed after the campaign has completed. Thus, it is of great interest to devise an optimal bidding strategy sequentially so that the campaign budget can be dynamically allocated across all the available impressions on the basis of both the immediate and future rewards. In this paper, we formulate the bid decision process as a reinforcement learning problem, where the state space is represented by the auction information and the campaign's real-time parameters, while an action is the bid price to set. By modeling the state transition via auction competition, we build a Markov Decision Process framework for learning the optimal bidding policy to optimize the advertising performance in the dynamic real-time bidding environment. Furthermore, the scalability problem from the large real-world auction volume and campaign budget is well handled by state value approximation using neural networks.

  • 7 authors
·
Jan 10, 2017

Cooperative Multi-UAV Coverage Mission Planning Platform for Remote Sensing Applications

This paper proposes a novel mission planning platform, capable of efficiently deploying a team of UAVs to cover complex-shaped areas, in various remote sensing applications. Under the hood lies a novel optimization scheme for grid-based methods, utilizing Simulated Annealing algorithm, that significantly increases the achieved percentage of coverage and improves the qualitative features of the generated paths. Extensive simulated evaluation in comparison with a state-of-the-art alternative methodology, for coverage path planning (CPP) operations, establishes the performance gains in terms of achieved coverage and overall duration of the generated missions. On top of that, DARP algorithm is employed to allocate sub-tasks to each member of the swarm, taking into account each UAV's sensing and operational capabilities, their initial positions and any no-fly-zones possibly defined inside the operational area. This feature is of paramount importance in real-life applications, as it has the potential to achieve tremendous performance improvements in terms of time demanded to complete a mission, while at the same time it unlocks a wide new range of applications, that was previously not feasible due to the limited battery life of UAVs. In order to investigate the actual efficiency gains that are introduced by the multi-UAV utilization, a simulated study is performed as well. All of these capabilities are packed inside an end-to-end platform that eases the utilization of UAVs' swarms in remote sensing applications. Its versatility is demonstrated via two different real-life applications: (i) a photogrametry for precision agriculture and (ii) an indicative search and rescue for first responders missions, that were performed utilizing a swarm of commercial UAVs. The source code can be found at: https://github.com/savvas-ap/mCPP-optimized-DARP

  • 4 authors
·
Jan 18, 2022

Transcendental Idealism of Planner: Evaluating Perception from Planning Perspective for Autonomous Driving

Evaluating the performance of perception modules in autonomous driving is one of the most critical tasks in developing the complex intelligent system. While module-level unit test metrics adopted from traditional computer vision tasks are feasible to some extent, it remains far less explored to measure the impact of perceptual noise on the driving quality of autonomous vehicles in a consistent and holistic manner. In this work, we propose a principled framework that provides a coherent and systematic understanding of the impact an error in the perception module imposes on an autonomous agent's planning that actually controls the vehicle. Specifically, the planning process is formulated as expected utility maximisation, where all input signals from upstream modules jointly provide a world state description, and the planner strives for the optimal action by maximising the expected utility determined by both world states and actions. We show that, under practical conditions, the objective function can be represented as an inner product between the world state description and the utility function in a Hilbert space. This geometric interpretation enables a novel way to analyse the impact of noise in world state estimation on planning and leads to a universal metric for evaluating perception. The whole framework resembles the idea of transcendental idealism in the classical philosophical literature, which gives the name to our approach.

  • 2 authors
·
Jun 12, 2023

Planning Anything with Rigor: General-Purpose Zero-Shot Planning with LLM-based Formalized Programming

While large language models (LLMs) have recently demonstrated strong potential in solving planning problems, there is a trade-off between flexibility and complexity. LLMs, as zero-shot planners themselves, are still not capable of directly generating valid plans for complex planning problems such as multi-constraint or long-horizon tasks. On the other hand, many frameworks aiming to solve complex planning problems often rely on task-specific preparatory efforts, such as task-specific in-context examples and pre-defined critics/verifiers, which limits their cross-task generalization capability. In this paper, we tackle these challenges by observing that the core of many planning problems lies in optimization problems: searching for the optimal solution (best plan) with goals subject to constraints (preconditions and effects of decisions). With LLMs' commonsense, reasoning, and programming capabilities, this opens up the possibilities of a universal LLM-based approach to planning problems. Inspired by this observation, we propose LLMFP, a general-purpose framework that leverages LLMs to capture key information from planning problems and formally formulate and solve them as optimization problems from scratch, with no task-specific examples needed. We apply LLMFP to 9 planning problems, ranging from multi-constraint decision making to multi-step planning problems, and demonstrate that LLMFP achieves on average 83.7% and 86.8% optimal rate across 9 tasks for GPT-4o and Claude 3.5 Sonnet, significantly outperforming the best baseline (direct planning with OpenAI o1-preview) with 37.6% and 40.7% improvements. We also validate components of LLMFP with ablation experiments and analyzed the underlying success and failure reasons.

  • 3 authors
·
Oct 15, 2024

Wing Optimisation for a tractor propeller driven Micro Aerial Vehicle

This paper describes an investigation of the possible benefits from wing optimisation in improving the performance of Micro Air Vehicles (MAVs). As an example we study the Avion (3.64 kg mass, 1.60 m span), being designed at the CSIR National Aerospace Laboratories (NAL), Bengaluru. The optimisation is first carried out using the methodology described by Rakshith et al. (using an in\textendash house software PROWING), developed for large transport aircraft, with certain modifications to adapt the code to the special features of the MAV. The chief among such features is the use of low Reynolds number aerofoils with significantly different aerodynamic characteristics on a small MAV. These characteristics are taken from test data when available, and/or estimated by the XFOIL code of Drela. A total of 8 optimisation cases are studied for the purpose, leading to 6 different options for new wing planforms (and associated twist distributions along the wing span) with an improved performance. It is found that the improvements in drag coefficient using the PROWING code are about 5%. However, by allowing the operating lift coefficient C_L to float within a specified range, drag bucket characteristics of the Eppler E423 aerofoil used on Avion can be exploited to improve the endurance, which is a major performance parameter for Avion. Thus, compared to the control wing W_0 (with operating point at C_L =0.7) used in the preliminary design, permitting a variation of C_L over a range of pm 10% is shown to enhance the endurance of wing W_4 by 18.6%, and of wing W_{6} with a permitted C_L range of pm 50% by 39.2%. Apart from the philosophy of seeking optimal operating conditions for a given configuration, the advantages of optimising design parameters such as washout of a simple wing proposed in the preliminary design stage, is also demonstrated.

  • 2 authors
·
Sep 18, 2024

Efficiently Training Deep-Learning Parametric Policies using Lagrangian Duality

Constrained Markov Decision Processes (CMDPs) are critical in many high-stakes applications, where decisions must optimize cumulative rewards while strictly adhering to complex nonlinear constraints. In domains such as power systems, finance, supply chains, and precision robotics, violating these constraints can result in significant financial or societal costs. Existing Reinforcement Learning (RL) methods often struggle with sample efficiency and effectiveness in finding feasible policies for highly and strictly constrained CMDPs, limiting their applicability in these environments. Stochastic dual dynamic programming is often used in practice on convex relaxations of the original problem, but they also encounter computational challenges and loss of optimality. This paper introduces a novel approach, Two-Stage Deep Decision Rules (TS-DDR), to efficiently train parametric actor policies using Lagrangian Duality. TS-DDR is a self-supervised learning algorithm that trains general decision rules (parametric policies) using stochastic gradient descent (SGD); its forward passes solve {\em deterministic} optimization problems to find feasible policies, and its backward passes leverage duality theory to train the parametric policy with closed-form gradients. TS-DDR inherits the flexibility and computational performance of deep learning methodologies to solve CMDP problems. Applied to the Long-Term Hydrothermal Dispatch (LTHD) problem using actual power system data from Bolivia, TS-DDR is shown to enhance solution quality and to reduce computation times by several orders of magnitude when compared to current state-of-the-art methods.

  • 4 authors
·
May 23, 2024