new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Jul 28

Achieving Socio-Economic Parity through the Lens of EU AI Act

Unfair treatment and discrimination are critical ethical concerns in AI systems, particularly as their adoption expands across diverse domains. Addressing these challenges, the recent introduction of the EU AI Act establishes a unified legal framework to ensure legal certainty for AI innovation and investment while safeguarding public interests, such as health, safety, fundamental rights, democracy, and the rule of law (Recital 8). The Act encourages stakeholders to initiate dialogue on existing AI fairness notions to address discriminatory outcomes of AI systems. However, these notions often overlook the critical role of Socio-Economic Status (SES), inadvertently perpetuating biases that favour the economically advantaged. This is concerning, given that principles of equalization advocate for equalizing resources or opportunities to mitigate disadvantages beyond an individual's control. While provisions for discrimination are laid down in the AI Act, specialized directions should be broadened, particularly in addressing economic disparities perpetuated by AI systems. In this work, we explore the limitations of popular AI fairness notions using a real-world dataset (Adult), highlighting their inability to address SES-driven disparities. To fill this gap, we propose a novel fairness notion, Socio-Economic Parity (SEP), which incorporates SES and promotes positive actions for underprivileged groups while accounting for factors within an individual's control, such as working hours, which can serve as a proxy for effort. We define a corresponding fairness measure and optimize a model constrained by SEP to demonstrate practical utility. Our results show the effectiveness of SEP in mitigating SES-driven biases. By analyzing the AI Act alongside our method, we lay a foundation for aligning AI fairness with SES factors while ensuring legal compliance.

  • 4 authors
·
Mar 29, 2025

Magnitude Invariant Parametrizations Improve Hypernetwork Learning

Hypernetworks, neural networks that predict the parameters of another neural network, are powerful models that have been successfully used in diverse applications from image generation to multi-task learning. Unfortunately, existing hypernetworks are often challenging to train. Training typically converges far more slowly than for non-hypernetwork models, and the rate of convergence can be very sensitive to hyperparameter choices. In this work, we identify a fundamental and previously unidentified problem that contributes to the challenge of training hypernetworks: a magnitude proportionality between the inputs and outputs of the hypernetwork. We demonstrate both analytically and empirically that this can lead to unstable optimization, thereby slowing down convergence, and sometimes even preventing any learning. We present a simple solution to this problem using a revised hypernetwork formulation that we call Magnitude Invariant Parametrizations (MIP). We demonstrate the proposed solution on several hypernetwork tasks, where it consistently stabilizes training and achieves faster convergence. Furthermore, we perform a comprehensive ablation study including choices of activation function, normalization strategies, input dimensionality, and hypernetwork architecture; and find that MIP improves training in all scenarios. We provide easy-to-use code that can turn existing networks into MIP-based hypernetworks.

  • 3 authors
·
Apr 15, 2023

Rethinking Image Inpainting via a Mutual Encoder-Decoder with Feature Equalizations

Deep encoder-decoder based CNNs have advanced image inpainting methods for hole filling. While existing methods recover structures and textures step-by-step in the hole regions, they typically use two encoder-decoders for separate recovery. The CNN features of each encoder are learned to capture either missing structures or textures without considering them as a whole. The insufficient utilization of these encoder features limit the performance of recovering both structures and textures. In this paper, we propose a mutual encoder-decoder CNN for joint recovery of both. We use CNN features from the deep and shallow layers of the encoder to represent structures and textures of an input image, respectively. The deep layer features are sent to a structure branch and the shallow layer features are sent to a texture branch. In each branch, we fill holes in multiple scales of the CNN features. The filled CNN features from both branches are concatenated and then equalized. During feature equalization, we reweigh channel attentions first and propose a bilateral propagation activation function to enable spatial equalization. To this end, the filled CNN features of structure and texture mutually benefit each other to represent image content at all feature levels. We use the equalized feature to supplement decoder features for output image generation through skip connections. Experiments on the benchmark datasets show the proposed method is effective to recover structures and textures and performs favorably against state-of-the-art approaches.

  • 5 authors
·
Jul 14, 2020

An OFDM Signal Identification Method for Wireless Communications Systems

Distinction of OFDM signals from single carrier signals is highly important for adaptive receiver algorithms and signal identification applications. OFDM signals exhibit Gaussian characteristics in time domain and fourth order cumulants of Gaussian distributed signals vanish in contrary to the cumulants of other signals. Thus fourth order cumulants can be utilized for OFDM signal identification. In this paper, first, formulations of the estimates of the fourth order cumulants for OFDM signals are provided. Then it is shown these estimates are affected significantly from the wireless channel impairments, frequency offset, phase offset and sampling mismatch. To overcome these problems, a general chi-square constant false alarm rate Gaussianity test which employs estimates of cumulants and their covariances is adapted to the specific case of wireless OFDM signals. Estimation of the covariance matrix of the fourth order cumulants are greatly simplified peculiar to the OFDM signals. A measurement setup is developed to analyze the performance of the identification method and for comparison purposes. A parametric measurement analysis is provided depending on modulation order, signal to noise ratio, number of symbols, and degree of freedom of the underlying test. The proposed method outperforms statistical tests which are based on fixed thresholds or empirical values, while a priori information requirement and complexity of the proposed method are lower than the coherent identification techniques.

  • 2 authors
·
Dec 29, 2014 17

Large Language Model's Multi-Capability Alignment in Biomedical Domain

BalancedBio is a theoretically grounded framework for parameter-efficient biomedical reasoning, addressing multi-capability integration in domain-specific AI alignment. It establishes the Biomedical Multi-Capability Convergence Theorem, proving orthogonal gradient spaces are essential to prevent capability interference for safe deployment. Key innovations include: (1) Medical Knowledge Grounded Synthetic Generation (MKGSG), extending Source2Synth with clinical workflow constraints and medical ontology validation for factual accuracy and safety; and (2) Capability Aware Group Relative Policy Optimization, deriving optimal hybrid reward weighting to maintain orthogonality in RL, using a reward model with rule-based and model-based scores adapted to biomedical tasks. Mathematical analysis proves Pareto-optimal convergence, preserving performance across capabilities. It achieves state-of-the-art results in its parameter class: domain expertise (80.95% BIOMED-MMLU, +15.32% over baseline), reasoning (61.94%, +7.75%), instruction following (67.95%, +6.44%), and integration (86.7%, +18.5%). Theoretical safety guarantees include bounds on capability preservation and clinical accuracy. Real-world deployment yields 78% cost reduction, 23% improved diagnostic accuracy, and 89% clinician acceptance. This work provides a principled methodology for biomedical AI alignment, enabling efficient reasoning with essential safety and reliability, with the 0.5B model version to be released.

  • 4 authors
·
Aug 5, 2025

Exploring Quality and Generalizability in Parameterized Neural Audio Effects

Deep neural networks have shown promise for music audio signal processing applications, often surpassing prior approaches, particularly as end-to-end models in the waveform domain. Yet results to date have tended to be constrained by low sample rates, noise, narrow domains of signal types, and/or lack of parameterized controls (i.e. "knobs"), making their suitability for professional audio engineering workflows still lacking. This work expands on prior research published on modeling nonlinear time-dependent signal processing effects associated with music production by means of a deep neural network, one which includes the ability to emulate the parameterized settings you would see on an analog piece of equipment, with the goal of eventually producing commercially viable, high quality audio, i.e. 44.1 kHz sampling rate at 16-bit resolution. The results in this paper highlight progress in modeling these effects through architecture and optimization changes, towards increasing computational efficiency, lowering signal-to-noise ratio, and extending to a larger variety of nonlinear audio effects. Toward these ends, the strategies employed involved a three-pronged approach: model speed, model accuracy, and model generalizability. Most of the presented methods provide marginal or no increase in output accuracy over the original model, with the exception of dataset manipulation. We found that limiting the audio content of the dataset, for example using datasets of just a single instrument, provided a significant improvement in model accuracy over models trained on more general datasets.

  • 2 authors
·
Jun 9, 2020

Wavehax: Aliasing-Free Neural Waveform Synthesis Based on 2D Convolution and Harmonic Prior for Reliable Complex Spectrogram Estimation

Neural vocoders often struggle with aliasing in latent feature spaces, caused by time-domain nonlinear operations and resampling layers. Aliasing folds high-frequency components into the low-frequency range, making aliased and original frequency components indistinguishable and introducing two practical issues. First, aliasing complicates the waveform generation process, as the subsequent layers must address these aliasing effects, increasing the computational complexity. Second, it limits extrapolation performance, particularly in handling high fundamental frequencies, which degrades the perceptual quality of generated speech waveforms. This paper demonstrates that 1) time-domain nonlinear operations inevitably introduce aliasing but provide a strong inductive bias for harmonic generation, and 2) time-frequency-domain processing can achieve aliasing-free waveform synthesis but lacks the inductive bias for effective harmonic generation. Building on this insight, we propose Wavehax, an aliasing-free neural WAVEform generator that integrates 2D convolution and a HArmonic prior for reliable Complex Spectrogram estimation. Experimental results show that Wavehax achieves speech quality comparable to existing high-fidelity neural vocoders and exhibits exceptional robustness in scenarios requiring high fundamental frequency extrapolation, where aliasing effects become typically severe. Moreover, Wavehax requires less than 5% of the multiply-accumulate operations and model parameters compared to HiFi-GAN V1, while achieving over four times faster CPU inference speed.

  • 4 authors
·
Nov 11, 2024

Tunable Convolutions with Parametric Multi-Loss Optimization

Behavior of neural networks is irremediably determined by the specific loss and data used during training. However it is often desirable to tune the model at inference time based on external factors such as preferences of the user or dynamic characteristics of the data. This is especially important to balance the perception-distortion trade-off of ill-posed image-to-image translation tasks. In this work, we propose to optimize a parametric tunable convolutional layer, which includes a number of different kernels, using a parametric multi-loss, which includes an equal number of objectives. Our key insight is to use a shared set of parameters to dynamically interpolate both the objectives and the kernels. During training, these parameters are sampled at random to explicitly optimize all possible combinations of objectives and consequently disentangle their effect into the corresponding kernels. During inference, these parameters become interactive inputs of the model hence enabling reliable and consistent control over the model behavior. Extensive experimental results demonstrate that our tunable convolutions effectively work as a drop-in replacement for traditional convolutions in existing neural networks at virtually no extra computational cost, outperforming state-of-the-art control strategies in a wide range of applications; including image denoising, deblurring, super-resolution, and style transfer.

  • 5 authors
·
Apr 3, 2023

Improving Neural Network Training by Decoupling the Magnitude and Direction of Weight Vectors

Modern neural network training relies on optimizers such as Adam and Muon which act on each weight matrix as a single object. Yet every weight matrix carries two distinct quantities -- a magnitude and a direction -- and all optimizers stepping in the matrix as a whole couple their dynamics: the directional change from an update depends on the current magnitude, while the magnitude drifts as a byproduct of learning the direction, so neither is governed directly by the learning rate. Typical training therefore leans on surrounding recipes such as weight decay and warmup to keep learning stable at scale, though these regulate the coupling only indirectly; other recent methods instead constrain the weight to a fixed-norm sphere, but add no learnable magnitude, leaving scale control to normalization layers alone. We propose Magnitude--Direction (MD) Decoupling, an optimizer modification that factorizes each weight into a fixed-norm direction on a hypersphere and learnable per-row and per-column magnitude gains, updated at separate learning rates, all while the model still sees a single fused weight tensor. The method is agnostic to the base optimizer and removes the need for weight decay and warmup. Across both Adam and Muon, MD Decoupling improves on well-tuned baselines, transfers the optimal LR across model width without retuning, and continues to help at scale on large Mixture-of-Experts (MoE) models. Treating magnitude and direction as separately controlled quantities thus yields more predictable training dynamics and a simple, broadly applicable improvement to modern optimizers.

  • 4 authors
·
Jun 23

Fantastic Pretraining Optimizers and Where to Find Them

AdamW has long been the dominant optimizer in language model pretraining, despite numerous claims that alternative optimizers offer 1.4 to 2x speedup. We posit that two methodological shortcomings have obscured fair comparisons and hindered practical adoption: (i) unequal hyperparameter tuning and (ii) limited or misleading evaluation setups. To address these two issues, we conduct a systematic study of ten deep learning optimizers across four model scales (0.1B-1.2B parameters) and data-to-model ratios (1-8x the Chinchilla optimum). We find that fair and informative comparisons require rigorous hyperparameter tuning and evaluations across a range of model scales and data-to-model ratios, performed at the end of training. First, optimal hyperparameters for one optimizer may be suboptimal for another, making blind hyperparameter transfer unfair. Second, the actual speedup of many proposed optimizers over well-tuned baselines is lower than claimed and decreases with model size to only 1.1x for 1.2B parameter models. Thirdly, comparing intermediate checkpoints before reaching the target training budgets can be misleading, as rankings between two optimizers can flip during training due to learning rate decay. Through our thorough investigation, we find that all the fastest optimizers such as Muon and Soap, use matrices as preconditioners -- multiplying gradients with matrices rather than entry-wise scalars. However, the speedup of matrix-based optimizers is inversely proportional to model scale, decreasing from 1.4x over AdamW for 0.1B parameter models to merely 1.1x for 1.2B parameter models.

  • 4 authors
·
Sep 2, 2025 1

Wideband Relative Transfer Function (RTF) Estimation Exploiting Frequency Correlations

This article focuses on estimating relative transfer functions (RTFs) for beamforming applications. Traditional methods often assume that spectra are uncorrelated, an assumption that is often violated in practical scenarios due to factors such as time-domain windowing or the non-stationary nature of signals, as observed in speech. To overcome these limitations, we propose an RTF estimation technique that leverages spectral and spatial correlations through subspace analysis. Additionally, we derive Cram\'er--Rao bounds (CRBs) for the RTF estimation task, providing theoretical insights into the achievable estimation accuracy. These bounds reveal that channel estimation can be performed more accurately if the noise or the target signal exhibits spectral correlations. Experiments with both real and synthetic data show that our technique outperforms the narrowband maximum-likelihood estimator, known as covariance whitening (CW), when the target exhibits spectral correlations. Although the proposed algorithm generally achieves accuracy close to the theoretical bound, there is potential for further improvement, especially in scenarios with highly spectrally correlated noise. While channel estimation has various applications, we demonstrate the method using a minimum variance distortionless (MVDR) beamformer for multichannel speech enhancement. A free Python implementation is also provided.

  • 3 authors
·
Jul 19, 2024

Explicit Estimation of Magnitude and Phase Spectra in Parallel for High-Quality Speech Enhancement

Phase information has a significant impact on speech perceptual quality and intelligibility. However, existing speech enhancement methods encounter limitations in explicit phase estimation due to the non-structural nature and wrapping characteristics of the phase, leading to a bottleneck in enhanced speech quality. To overcome the above issue, in this paper, we proposed MP-SENet, a novel Speech Enhancement Network that explicitly enhances Magnitude and Phase spectra in parallel. The proposed MP-SENet comprises a Transformer-embedded encoder-decoder architecture. The encoder aims to encode the input distorted magnitude and phase spectra into time-frequency representations, which are further fed into time-frequency Transformers for alternatively capturing time and frequency dependencies. The decoder comprises a magnitude mask decoder and a phase decoder, directly enhancing magnitude and wrapped phase spectra by incorporating a magnitude masking architecture and a phase parallel estimation architecture, respectively. Multi-level loss functions explicitly defined on the magnitude spectra, wrapped phase spectra, and short-time complex spectra are adopted to jointly train the MP-SENet model. A metric discriminator is further employed to compensate for the incomplete correlation between these losses and human auditory perception. Experimental results demonstrate that our proposed MP-SENet achieves state-of-the-art performance across multiple speech enhancement tasks, including speech denoising, dereverberation, and bandwidth extension. Compared to existing phase-aware speech enhancement methods, it further mitigates the compensation effect between the magnitude and phase by explicit phase estimation, elevating the perceptual quality of enhanced speech.

  • 3 authors
·
Aug 17, 2023

Evaluating Dynamic Range Compressor Models Using Control-Voltage Measurements: an Approach and Dataset

The quantity that defines the behavior of a dynamic range compressor is the time-varying gain applied to the signal as a function of the input level. However, models of these devices are typically evaluated using proxy metrics because isolating the gain reduction signal from the audio input-output data included in existing datasets creates an ill-conditioned inverse problem. It is unclear how accurately these metrics describe the behavior the model is tasked with emulating, particularly as waveform-based metrics can be influenced by secondary effects introduced by analog processing and capture, even when those effects are inaudible. We investigate a method of evaluation in which the gain-reduction signal produced by a model is measured directly against a gain-reduction control voltage signal produced by the hardware. To evaluate the efficacy of this metric as a learning objective, a gray-box model is trained using loss computed directly over the gain control signals alongside two models trained using common proxy losses. The models trained using proxy losses did not achieve parity with models trained directly on the gain control signal when evaluated with respect to the underlying control trajectory, and the waveform-domain metrics assigned similar errors to models that were clearly separated by the direct metric. To facilitate further exploration of this method of evaluation, we present a Solid State Logic bus compressor dataset that includes the gain control voltage signal captured alongside the audio output.

  • 2 authors
·
Jun 16

Relative Representations of Latent Spaces enable Efficient Semantic Channel Equalization

In multi-user semantic communication, language mismatche poses a significant challenge when independently trained agents interact. We present a novel semantic equalization algorithm that enables communication between agents with different languages without additional retraining. Our algorithm is based on relative representations, a framework that enables different agents employing different neural network models to have unified representation. It proceeds by projecting the latent vectors of different models into a common space defined relative to a set of data samples called anchors, whose number equals the dimension of the resulting space. A communication between different agents translates to a communication of semantic symbols sampled from this relative space. This approach, in addition to aligning the semantic representations of different agents, allows compressing the amount of information being exchanged, by appropriately selecting the number of anchors. Eventually, we introduce a novel anchor selection strategy, which advantageously determines prototypical anchors, capturing the most relevant information for the downstream task. Our numerical results show the effectiveness of the proposed approach allowing seamless communication between agents with radically different models, including differences in terms of neural network architecture and datasets used for initial training.

  • 5 authors
·
Nov 29, 2024

Self-Calibration and Bilinear Inverse Problems via Linear Least Squares

Whenever we use devices to take measurements, calibration is indispensable. While the purpose of calibration is to reduce bias and uncertainty in the measurements, it can be quite difficult, expensive, and sometimes even impossible to implement. We study a challenging problem called self-calibration, i.e., the task of designing an algorithm for devices so that the algorithm is able to perform calibration automatically. More precisely, we consider the setup y = A(d) x + epsilon where only partial information about the sensing matrix A(d) is known and where A(d) linearly depends on d. The goal is to estimate the calibration parameter d (resolve the uncertainty in the sensing process) and the signal/object of interests x simultaneously. For three different models of practical relevance, we show how such a bilinear inverse problem, including blind deconvolution as an important example, can be solved via a simple linear least squares approach. As a consequence, the proposed algorithms are numerically extremely efficient, thus potentially allowing for real-time deployment. We also present a variation of the least squares approach, which leads to a~spectral method, where the solution to the bilinear inverse problem can be found by computing the singular vector associated with the smallest singular value of a certain matrix derived from the bilinear system. Explicit theoretical guarantees and stability theory are derived for both techniques; and the number of sampling complexity is nearly optimal (up to a poly-log factor). Applications in imaging sciences and signal processing are discussed and numerical simulations are presented to demonstrate the effectiveness and efficiency of our approach.

  • 2 authors
·
Nov 13, 2016

Verified Uncertainty Calibration

Applications such as weather forecasting and personalized medicine demand models that output calibrated probability estimates---those representative of the true likelihood of a prediction. Most models are not calibrated out of the box but are recalibrated by post-processing model outputs. We find in this work that popular recalibration methods like Platt scaling and temperature scaling are (i) less calibrated than reported, and (ii) current techniques cannot estimate how miscalibrated they are. An alternative method, histogram binning, has measurable calibration error but is sample inefficient---it requires O(B/ε^2) samples, compared to O(1/ε^2) for scaling methods, where B is the number of distinct probabilities the model can output. To get the best of both worlds, we introduce the scaling-binning calibrator, which first fits a parametric function to reduce variance and then bins the function values to actually ensure calibration. This requires only O(1/ε^2 + B) samples. Next, we show that we can estimate a model's calibration error more accurately using an estimator from the meteorological community---or equivalently measure its calibration error with fewer samples (O(B) instead of O(B)). We validate our approach with multiclass calibration experiments on CIFAR-10 and ImageNet, where we obtain a 35% lower calibration error than histogram binning and, unlike scaling methods, guarantees on true calibration. In these experiments, we also estimate the calibration error and ECE more accurately than the commonly used plugin estimators. We implement all these methods in a Python library: https://pypi.org/project/uncertainty-calibration

  • 3 authors
·
Sep 23, 2019

RouteBalance: Fused Model Routing and Load Balancing for Heterogeneous LLM Serving

Heterogeneous LLM serving stacks split scheduling into two layers that optimize in isolation: model routers pick a model from quality and cost signals while ignoring instance load, and serving load balancers optimize queues while ignoring quality. We present RouteBalance, a serving-aware scheduling layer that fuses both into a single online assignment over concrete model instances, jointly trading off quality, latency, and cost. A batched in-process predictor stack and dead-reckoned instance state keep the joint decision cheap on the request hot path (approx32 ms at 12 req/s). On a 13-instance, 28-GPU heterogeneous cluster serving four model sizes, a single deployed RouteBalance stack traces the upper region of the three-way quality-cost-throughput frontier. Sweeping one weight vector reaches both the highest routing-decision quality (DeepEval 0.419, +0.013 over the strongest baseline, 95% CI [{+}0.005,{+}0.022]; the ordering holds when a second judge re-scores the actually served text) and, at its cost-priority corner, per-request cost that ties the cheapest baseline. With router engineering equalized against concurrent-scoring baseline variants we build, its balanced preset serves at 2.8 s and 30 req/s, leading 2.6 to 4.1times ahead of enhanced BEST-Route at high load. (Deploying those routers as published, one serial scoring call per request, makes them collapse 23times under load, a deployment-architecture effect we isolate separately, not the routing result.) A four-arm isolation shows the benefit follows from pricing latency at model-selection time; the learned predictors contribute calibration and SLO headroom rather than the headline frontier. Code: https://github.com/AKafakA/route-balance

  • 2 authors
·
Jun 15

HoloBeam: Learning Optimal Beamforming in Far-Field Holographic Metasurface Transceivers

Holographic Metasurface Transceivers (HMTs) are emerging as cost-effective substitutes to large antenna arrays for beamforming in Millimeter and TeraHertz wave communication. However, to achieve desired channel gains through beamforming in HMT, phase-shifts of a large number of elements need to be appropriately set, which is challenging. Also, these optimal phase-shifts depend on the location of the receivers, which could be unknown. In this work, we develop a learning algorithm using a {\it fixed-budget multi-armed bandit framework} to beamform and maximize received signal strength at the receiver for far-field regions. Our algorithm, named \Algo exploits the parametric form of channel gains of the beams, which can be expressed in terms of two {\it phase-shifting parameters}. Even after parameterization, the problem is still challenging as phase-shifting parameters take continuous values. To overcome this, {\it\HB} works with the discrete values of phase-shifting parameters and exploits their unimodal relations with channel gains to learn the optimal values faster. We upper bound the probability of {\it\HB} incorrectly identifying the (discrete) optimal phase-shift parameters in terms of the number of pilots used in learning. We show that this probability decays exponentially with the number of pilot signals. We demonstrate that {\it\HB} outperforms state-of-the-art algorithms through extensive simulations.

  • 3 authors
·
Dec 29, 2023

Machine Learning with Multitype Protected Attributes: Intersectional Fairness through Regularisation

Ensuring equitable treatment (fairness) across protected attributes (such as gender or ethnicity) is a critical issue in machine learning. Most existing literature focuses on binary classification, but achieving fairness in regression tasks-such as insurance pricing or hiring score assessments-is equally important. Moreover, anti-discrimination laws also apply to continuous attributes, such as age, for which many existing methods are not applicable. In practice, multiple protected attributes can exist simultaneously; however, methods targeting fairness across several attributes often overlook so-called "fairness gerrymandering", thereby ignoring disparities among intersectional subgroups (e.g., African-American women or Hispanic men). In this paper, we propose a distance covariance regularisation framework that mitigates the association between model predictions and protected attributes, in line with the fairness definition of demographic parity, and that captures both linear and nonlinear dependencies. To enhance applicability in the presence of multiple protected attributes, we extend our framework by incorporating two multivariate dependence measures based on distance covariance: the previously proposed joint distance covariance (JdCov) and our novel concatenated distance covariance (CCdCov), which effectively address fairness gerrymandering in both regression and classification tasks involving protected attributes of various types. We discuss and illustrate how to calibrate regularisation strength, including a method based on Jensen-Shannon divergence, which quantifies dissimilarities in prediction distributions across groups. We apply our framework to the COMPAS recidivism dataset and a large motor insurance claims dataset.

  • 5 authors
·
Sep 9, 2025

PrismAudio: Decomposed Chain-of-Thoughts and Multi-dimensional Rewards for Video-to-Audio Generation

Video-to-Audio (V2A) generation requires balancing four critical perceptual dimensions: semantic consistency, audio-visual temporal synchrony, aesthetic quality, and spatial accuracy; yet existing methods suffer from objective entanglement that conflates competing goals in single loss functions and lack human preference alignment. We introduce PrismAudio, the first framework to integrate Reinforcement Learning into V2A generation with specialized Chain-of-Thought (CoT) planning. Our approach decomposes monolithic reasoning into four specialized CoT modules (Semantic, Temporal, Aesthetic, and Spatial CoT), each paired with targeted reward functions. This CoT-reward correspondence enables multidimensional RL optimization that guides the model to jointly generate better reasoning across all perspectives, solving the objective entanglement problem while preserving interpretability. To make this optimization computationally practical, we propose Fast-GRPO, which employs hybrid ODE-SDE sampling that dramatically reduces the training overhead compared to existing GRPO implementations. We also introduce AudioCanvas, a rigorous benchmark that is more distributionally balanced and covers more realistically diverse and challenging scenarios than existing datasets, with 300 single-event classes and 501 multi-event samples. Experimental results demonstrate that PrismAudio achieves state-of-the-art performance across all four perceptual dimensions on both the in-domain VGGSound test set and out-of-domain AudioCanvas benchmark. The project page is available at https://PrismAudio-Project.github.io.

  • 9 authors
·
Nov 24, 2025

Hierarchical Spatial Algorithms for High-Resolution Image Quantization and Feature Extraction

This study introduces a modular framework for spatial image processing, integrating grayscale quantization, color and brightness enhancement, image sharpening, bidirectional transformation pipelines, and geometric feature extraction. A stepwise intensity transformation quantizes grayscale images into eight discrete levels, producing a posterization effect that simplifies representation while preserving structural detail. Color enhancement is achieved via histogram equalization in both RGB and YCrCb color spaces, with the latter improving contrast while maintaining chrominance fidelity. Brightness adjustment is implemented through HSV value-channel manipulation, and image sharpening is performed using a 3 * 3 convolution kernel to enhance high-frequency details. A bidirectional transformation pipeline that integrates unsharp masking, gamma correction, and noise amplification achieved accuracy levels of 76.10% and 74.80% for the forward and reverse processes, respectively. Geometric feature extraction employed Canny edge detection, Hough-based line estimation (e.g., 51.50{\deg} for billiard cue alignment), Harris corner detection, and morphological window localization. Cue isolation further yielded 81.87\% similarity against ground truth images. Experimental evaluation across diverse datasets demonstrates robust and deterministic performance, highlighting its potential for real-time image analysis and computer vision.

  • 1 authors
·
Oct 9, 2025

Robust Layerwise Scaling Rules by Proper Weight Decay Tuning

Empirical scaling laws prescribe how to allocate parameters, data, and compute, while maximal-update parameterization (muP) enables learning-rate transfer across widths by equalizing early-time update magnitudes. However, in modern scale-invariant architectures, training quickly enters an optimizer-governed steady state where normalization layers create backward scale sensitivity and the effective learning rate becomes width dependent, degrading muP transfer. We address this by introducing a weight-decay scaling rule for AdamW that preserves sublayer gain across widths. Empirically, the singular-value spectrum of each matrix parameter scales in norm as eta/lambda with an approximately invariant shape; under width scaling d, we observe that the top singular value scales approximately as eta/lambdacdot d^{0.75}. Combining this observation with the muP learning-rate rule eta_2propto d^{-1} for matrix-like parameters implies an empirical weight-decay scaling rule lambda_2propto d that approximately keeps sublayer gains width invariant. Together with vector-like parameters trained at eta_1=Theta_d(1) and lambda_1=0, this yields zero-shot transfer of both learning rate and weight decay from proxy to target widths, removing per-width sweeps. We validate the rule on LLaMA-style Transformers and in a minimal synthetic setting, and we provide a simple diagnostic, matching top singular values, to check sublayer-gain invariance. Our results extend muP beyond the near-init regime by explicitly controlling steady-state scales set by the optimizer, offering a practical recipe for width-robust hyperparameter transfer under AdamW.

Exploring Adapter Design Tradeoffs for Low Resource Music Generation

Fine-tuning large-scale music generation models, such as MusicGen and Mustango, is a computationally expensive process, often requiring updates to billions of parameters and, therefore, significant hardware resources. Parameter-Efficient Fine-Tuning (PEFT) techniques, particularly adapter-based methods, have emerged as a promising alternative, enabling adaptation with minimal trainable parameters while preserving model performance. However, the design choices for adapters, including their architecture, placement, and size, are numerous, and it is unclear which of these combinations would produce optimal adapters and why, for a given case of low-resource music genre. In this paper, we attempt to answer this question by studying various adapter configurations for two AI music models, MusicGen and Mustango, on two genres: Hindustani Classical and Turkish Makam music. Our findings reveal distinct trade-offs: convolution-based adapters excel in capturing fine-grained local musical details such as ornamentations and short melodic phrases, while transformer-based adapters better preserve long-range dependencies crucial for structured improvisation. Additionally, we analyze computational resource requirements across different adapter scales, demonstrating how mid-sized adapters (40M parameters) achieve an optimal balance between expressivity and quality. Furthermore, we find that Mustango, a diffusion-based model, generates more diverse outputs with better adherence to the description in the input prompt while lacking in providing stability in notes, rhythm alignment, and aesthetics. Also, it is computationally intensive and requires significantly more time to train. In contrast, autoregressive models like MusicGen offer faster training and are more efficient, and can produce better quality output in comparison, but have slightly higher redundancy in their generations.

  • 3 authors
·
Jun 26, 2025

Neural Network-Based Score Estimation in Diffusion Models: Optimization and Generalization

Diffusion models have emerged as a powerful tool rivaling GANs in generating high-quality samples with improved fidelity, flexibility, and robustness. A key component of these models is to learn the score function through score matching. Despite empirical success on various tasks, it remains unclear whether gradient-based algorithms can learn the score function with a provable accuracy. As a first step toward answering this question, this paper establishes a mathematical framework for analyzing score estimation using neural networks trained by gradient descent. Our analysis covers both the optimization and the generalization aspects of the learning procedure. In particular, we propose a parametric form to formulate the denoising score-matching problem as a regression with noisy labels. Compared to the standard supervised learning setup, the score-matching problem introduces distinct challenges, including unbounded input, vector-valued output, and an additional time variable, preventing existing techniques from being applied directly. In this paper, we show that with proper designs, the evolution of neural networks during training can be accurately modeled by a series of kernel regression tasks. Furthermore, by applying an early-stopping rule for gradient descent and leveraging recent developments in neural tangent kernels, we establish the first generalization error (sample complexity) bounds for learning the score function with neural networks, despite the presence of noise in the observations. Our analysis is grounded in a novel parametric form of the neural network and an innovative connection between score matching and regression analysis, facilitating the application of advanced statistical and optimization techniques.

  • 3 authors
·
Jan 28, 2024

Parameter Competition Balancing for Model Merging

While fine-tuning pretrained models has become common practice, these models often underperform outside their specific domains. Recently developed model merging techniques enable the direct integration of multiple models, each fine-tuned for distinct tasks, into a single model. This strategy promotes multitasking capabilities without requiring retraining on the original datasets. However, existing methods fall short in addressing potential conflicts and complex correlations between tasks, especially in parameter-level adjustments, posing a challenge in effectively balancing parameter competition across various tasks. This paper introduces an innovative technique named PCB-Merging (Parameter Competition Balancing), a lightweight and training-free technique that adjusts the coefficients of each parameter for effective model merging. PCB-Merging employs intra-balancing to gauge parameter significance within individual tasks and inter-balancing to assess parameter similarities across different tasks. Parameters with low importance scores are dropped, and the remaining ones are rescaled to form the final merged model. We assessed our approach in diverse merging scenarios, including cross-task, cross-domain, and cross-training configurations, as well as out-of-domain generalization. The experimental results reveal that our approach achieves substantial performance enhancements across multiple modalities, domains, model sizes, number of tasks, fine-tuning forms, and large language models, outperforming existing model merging methods. The code is publicly available at: https://github.com/duguodong7/pcb-merging.

  • 11 authors
·
Oct 3, 2024

The Differentiable Auditory Loop (DAL): An ML Framework for Hyper-Personalized Hearing Aids

Conventional hearing aids rely on fixed, frequency-dependent amplification and compression to manage reduced sensitivity, which often fails to provide sufficient listening support in complex environments, such as situations with multiple speakers (the ``cocktail party'' problem). To more comprehensively address the underlying encoding dysfunctions of hearing loss, we introduce the Differentiable Auditory Loop (DAL), a new open-source framework for personalized hearing aid design and fitting. Our first implementation of DAL incorporates CARFAC, a differentiable model of human cochlear function, which we ported to JAX, to optimize a deep neural network to match impaired auditory neural activity patterns with a normal-hearing reference. To build a hearing aid with the fine-grained spectro-temporal signal processing required, we adopt SEANet, a waveform-to-waveform fully convolutional UNet generator. We fine-tune the network by comparing the outputs of a CARFAC model fitted to normal hearing with that of a CARFAC model fitted to match each subject's individual hearing impairment. The comparison is done using loss functions derived from the respective CARFAC neural activity pattern (NAP) outputs and stabilized auditory images (SAIs), the latter providing a 2D representation that captures phase-insensitive temporal structure in the auditory nerve output. Through gradient descent, the SEANet model learns to both denoise the input and compensate for the hearing loss modelled by the impaired CARFAC model. Across neural-representation and signal-fidelity metrics, the DAL-optimized SEANet model outperformed the tested master hearing aid (MHA) baselines. The DAL framework provides a practical path toward model-based, machine-learning-driven personalization of hearing aid signal processing. Next steps include hardware deployment to enable real-world clinical testing.

  • 6 authors
·
Jun 1

Improving equilibrium propagation without weight symmetry through Jacobian homeostasis

Equilibrium propagation (EP) is a compelling alternative to the backpropagation of error algorithm (BP) for computing gradients of neural networks on biological or analog neuromorphic substrates. Still, the algorithm requires weight symmetry and infinitesimal equilibrium perturbations, i.e., nudges, to estimate unbiased gradients efficiently. Both requirements are challenging to implement in physical systems. Yet, whether and how weight asymmetry affects its applicability is unknown because, in practice, it may be masked by biases introduced through the finite nudge. To address this question, we study generalized EP, which can be formulated without weight symmetry, and analytically isolate the two sources of bias. For complex-differentiable non-symmetric networks, we show that the finite nudge does not pose a problem, as exact derivatives can still be estimated via a Cauchy integral. In contrast, weight asymmetry introduces bias resulting in low task performance due to poor alignment of EP's neuronal error vectors compared to BP. To mitigate this issue, we present a new homeostatic objective that directly penalizes functional asymmetries of the Jacobian at the network's fixed point. This homeostatic objective dramatically improves the network's ability to solve complex tasks such as ImageNet 32x32. Our results lay the theoretical groundwork for studying and mitigating the adverse effects of imperfections of physical networks on learning algorithms that rely on the substrate's relaxation dynamics.

  • 2 authors
·
Sep 5, 2023

BinauralFlow: A Causal and Streamable Approach for High-Quality Binaural Speech Synthesis with Flow Matching Models

Binaural rendering aims to synthesize binaural audio that mimics natural hearing based on a mono audio and the locations of the speaker and listener. Although many methods have been proposed to solve this problem, they struggle with rendering quality and streamable inference. Synthesizing high-quality binaural audio that is indistinguishable from real-world recordings requires precise modeling of binaural cues, room reverb, and ambient sounds. Additionally, real-world applications demand streaming inference. To address these challenges, we propose a flow matching based streaming binaural speech synthesis framework called BinauralFlow. We consider binaural rendering to be a generation problem rather than a regression problem and design a conditional flow matching model to render high-quality audio. Moreover, we design a causal U-Net architecture that estimates the current audio frame solely based on past information to tailor generative models for streaming inference. Finally, we introduce a continuous inference pipeline incorporating streaming STFT/ISTFT operations, a buffer bank, a midpoint solver, and an early skip schedule to improve rendering continuity and speed. Quantitative and qualitative evaluations demonstrate the superiority of our method over SOTA approaches. A perceptual study further reveals that our model is nearly indistinguishable from real-world recordings, with a 42% confusion rate.

  • 10 authors
·
May 28, 2025 2

How Over-Parameterization Slows Down Gradient Descent in Matrix Sensing: The Curses of Symmetry and Initialization

This paper rigorously shows how over-parameterization changes the convergence behaviors of gradient descent (GD) for the matrix sensing problem, where the goal is to recover an unknown low-rank ground-truth matrix from near-isotropic linear measurements. First, we consider the symmetric setting with the symmetric parameterization where M^* in R^{n times n} is a positive semi-definite unknown matrix of rank r ll n, and one uses a symmetric parameterization XX^top to learn M^*. Here X in R^{n times k} with k > r is the factor matrix. We give a novel Omega (1/T^2) lower bound of randomly initialized GD for the over-parameterized case (k >r) where T is the number of iterations. This is in stark contrast to the exact-parameterization scenario (k=r) where the convergence rate is exp (-Omega (T)). Next, we study asymmetric setting where M^* in R^{n_1 times n_2} is the unknown matrix of rank r ll min{n_1,n_2}, and one uses an asymmetric parameterization FG^top to learn M^* where F in R^{n_1 times k} and G in R^{n_2 times k}. Building on prior work, we give a global exact convergence result of randomly initialized GD for the exact-parameterization case (k=r) with an exp (-Omega(T)) rate. Furthermore, we give the first global exact convergence result for the over-parameterization case (k>r) with an exp(-Omega(alpha^2 T)) rate where alpha is the initialization scale. This linear convergence result in the over-parameterization case is especially significant because one can apply the asymmetric parameterization to the symmetric setting to speed up from Omega (1/T^2) to linear convergence. On the other hand, we propose a novel method that only modifies one step of GD and obtains a convergence rate independent of alpha, recovering the rate in the exact-parameterization case.

  • 3 authors
·
Oct 2, 2023

EControl: Fast Distributed Optimization with Compression and Error Control

Modern distributed training relies heavily on communication compression to reduce the communication overhead. In this work, we study algorithms employing a popular class of contractive compressors in order to reduce communication overhead. However, the naive implementation often leads to unstable convergence or even exponential divergence due to the compression bias. Error Compensation (EC) is an extremely popular mechanism to mitigate the aforementioned issues during the training of models enhanced by contractive compression operators. Compared to the effectiveness of EC in the data homogeneous regime, the understanding of the practicality and theoretical foundations of EC in the data heterogeneous regime is limited. Existing convergence analyses typically rely on strong assumptions such as bounded gradients, bounded data heterogeneity, or large batch accesses, which are often infeasible in modern machine learning applications. We resolve the majority of current issues by proposing EControl, a novel mechanism that can regulate error compensation by controlling the strength of the feedback signal. We prove fast convergence for EControl in standard strongly convex, general convex, and nonconvex settings without any additional assumptions on the problem or data heterogeneity. We conduct extensive numerical evaluations to illustrate the efficacy of our method and support our theoretical findings.

  • 3 authors
·
Nov 6, 2023

Hierarchical Cooperative MARL for Joint Downlink PRB and Power Allocation in a 5G System

Efficient downlink radio resource management in 5G requires jointly optimizing user scheduling and transmit-power allocation under time-varying wireless conditions. This is challenging in OFDMA systems because PRB assignment is combinatorial, power allocation is continuous, and performance depends on channel evolution, link adaptation, and long-term fairness. We propose a hierarchical cooperative multi-agent reinforcement learning framework with staged curriculum training for joint downlink PRB and power allocation in a physically grounded 5G environment. System-level simulation is implemented in Sionna, while Sionna RT supports wireless scene construction and mobility-aware ray-traced channel generation. The control task is decomposed into two sequential stages: a PRB agent learns user-level resource shares, which are converted to exact PRB assignments by a deterministic channel-aware quota resolver, and a power agent distributes the base-station power budget across users and their assigned PRB-symbol resources. The framework operates in a cross-layer loop with adaptive modulation and coding, HARQ feedback, outer-loop link adaptation, and a fairness-aware reward based on smoothed throughput and Jain's fairness index. Training stability is improved through a three-phase curriculum for PRB allocation, power control, and joint fine-tuning. Under matched channel realizations, we compare against a PF scheduler with equal-power transmission and two ablations isolating the learned PRB and power-control components. Results show that both learned components improve throughput distribution relative to PF, while the full PRB and power controller achieves the largest cell-throughput gain with only a modest reduction in Jain's fairness index.

  • 4 authors
·
May 3

UniPASE: A Generative Model for Universal Speech Enhancement with High Fidelity and Low Hallucinations

Universal speech enhancement (USE) aims to restore speech signals from diverse distortions across multiple sampling rates. We propose UniPASE, an extension of the low-hallucination PASE framework tailored for USE. At its core is DeWavLM-Omni, a unified representation-level enhancement module fine-tuned from WavLM via knowledge distillation on a large-scale supervised multi-distortion dataset. This module directly converts degraded waveforms into clean and linguistically faithful phonetic representations, ensuring robust enhancement with minimal linguistic hallucination. Based on these enhanced phonetic representations, an Adapter generates enhanced acoustic representations containing rich acoustic details, which a neural Vocoder uses to reconstruct corresponding high-fidelity 16-kHz waveforms. A PostNet then converts the waveforms to 48~kHz before resampling them to their original rates, enabling seamless handling of inputs and outputs at multiple sampling rates. Experimental results on several evaluation datasets, covering sub-tasks and full tasks, demonstrate that UniPASE achieves superior or competitive performance compared with existing state-of-the-art models. The proposed model also serves as the backbone of our submission to the URGENT 2026 Challenge, which achieved 1st place in the objective evaluation. The source code and audio demos are available at https://github.com/xiaobin-rong/unipase/.

  • 5 authors
·
Apr 15