Daily Papers

Manipulation failures can leave scenes in states from which a task policy cannot recover. Learning corrective behaviors requires scalable failure exploration and physical grounding. We present Recova, an agent-guided framework that jointly develops task execution and recovery in a reconstructed digital twin, then verifies and refines both through real-world experience. In the twin, the agent diagnoses failures, tests corrective programs, and collects successful task and recovery rollouts for separate policies. During deployment, it monitors progress, invokes a learned or programmatic recovery, verifies scene restoration, and resumes execution. When no suitable recovery is available, a human demonstration resolves the failure and enters the learning loop, allowing the system to expand its recovery capabilities. Physical rollouts and human demonstrations are routed to the corresponding policy for DAgger training. Across six LIBERO-Pro settings and four MolmoSpaces categories, Recova achieves 78.8% and 64.9% mean success, compared with 71.7% and 38.0% for the strongest baselines. With parallel collection across four real-robot workstations, DAgger fine-tuning raises mean success from 23.8% to 77.5%, and recovery skills further raise it to 87.5%. Over four collection rounds on one task, observed human intervention falls from 87.5% to 0%. Together, these results show how agent-guided recovery turns failures into reusable capabilities, improving robustness while progressively reducing human intervention. Project page: https://www.liuisabella.com/Recova

World models for deformable objects should recover not only geometry and appearance, but also underlying physical dynamics, interaction grounding, and material behavior. Learning such a model from real videos is challenging because deformable linear, planar, and volumetric objects evolve under high-dimensional deformation, noisy interactions, and complex material response. The model must therefore infer a physical state from visual observations, roll it forward under new interactions, and render the resulting dynamics with high visual fidelity. We present DeformMaster, a video-derived interactive physics--neural world model that turns real interaction videos into an online interactive model of deformable objects within a unified dynamics-and-appearance framework. DeformMaster preserves structured physical rollout while using a neural residual to compensate for unmodeled effects, grounds sparse hand motion as distributed compliant actuator for hand--continuum interaction, represents material response with spatially varying constitutive experts, and drives high-fidelity 4D appearance from the predicted physical evolution. Experiments on real-world deformable-object sequences demonstrate DeformMaster's ability to roll out future dynamics and render dynamic appearance, outperforming state-of-the-art baselines while supporting novel action rollout, material-parameter variation, and dynamic novel-view synthesis.

World Action Models (WAMs) typically represent the world through latent embeddings from pretrained video models, which entangle heterogeneous aspects of the world, from how it looks (e.g., texture and color) to how it is physically configured (e.g., occupancy and pose). This raises an underexplored question: what should constitute the state of a WAM? We argue that the world state should separate how the world appears from how the world evolves under action: the former captures semantic context, while the latter is governed by physical state. To this end, we propose PrismWAM, which decouples physics from semantics while jointly modeling state and action. PrismWAM factorizes an embodied task into a Semantic PlanningrightarrowPhysical RolloutrightarrowExecutable Action pipeline: given only the initial RGB observation, semantic planning learns to predict the final goal image, while physical rollout predicts the fine-grained evolution toward this goal in depth space; executable actions are then generated from the depth rollout. Without any embodied action pretraining or additional data augmentation, PrismWAM achieves strong manipulation performance in both simulation and the real world. Notably, PrismWAM even surpasses a broad range of models with large-scale embodied action pretraining (e.g., OpenWAM-α). More broadly, we reframe World Action Models from modeling how the world looks to how it responds to action, paving the way for action-centric world models grounded in occupancy, flow, tactile sensing, proprioception, and beyond.

World Action Models (WAMs) have recently emerged as a promising paradigm for robotic manipulation by jointly predicting future visual observations and future actions. However, current WAMs typically execute a fixed number of predicted actions after each model inference, leaving the robot blind to whether the imagined future remains consistent with the actual physical rollout. In this work, we formulate adaptive WAM execution as a future-reality verification problem: the robot should execute longer when the WAM-predicted future remains reliable, and replan earlier when reality deviates from imagination. To this end, we propose Future Forward Dynamics Causal Attention (FFDC), a lightweight verifier that jointly reasons over predicted future actions, predicted visual dynamics, real observations, and language instructions to estimate whether the remaining action rollout can still be trusted. FFDC enables adaptive action chunk sizes as an emergent consequence of prediction-observation consistency, preserving the efficiency of long-horizon execution while restoring responsiveness in contact-rich or difficult phases. We further introduce Mixture-of-Horizon Training to improve long-horizon trajectory coverage for adaptive execution. Experiments on the RoboTwin benchmark and in the real world demonstrate that our method achieves a strong robustness-efficiency trade-off: on RoboTwin, it reduces WAM forward passes by 69.10% and execution time by 34.02%, while improving success rate by 2.54% over the short-chunk baseline; in real-world experiments, it improves success rate by 35%.

Interactive world simulators can provide scalable environments for robot planning, policy training, and evaluation by predicting action consequences while reducing reliance on repeated physical rollouts. To serve these applications, they must generate future image sequences that respond faithfully to robot actions and preserve the dynamics of robot-object interactions over long horizons. However, existing world models typically predict the entire next latent state and often fail to capture subtle changes induced by robot actions. Such omissions can produce physically implausible outcomes, including object interpenetration and excessive deformation. To address this limitation, we propose DeltaWorld, a physically consistent interactive world simulator for robotic manipulation. Our method introduces the Delta Latent Transition Model (Delta-LTM), which predicts action-induced latent feature changes and adds them to the current latent state to obtain the next state, rather than predicting the next latent state directly. To mitigate object interpenetration and excessive deformation in predicted future frames, Interaction-aware Latent Alignment is introduced to construct counterfactual interaction regions and supervise interaction-related latent changes. DeltaWorld is evaluated on the IWS manipulation benchmark and a self-collected cross-robot dataset covering multiple robot embodiments and manipulation tasks. On the cross-robot dataset, DeltaWorld reduces FVD by 46.6% and LPIPS by 31.1% relative to the IWS baseline. These results highlight the potential of DeltaWorld for long-horizon action-conditioned video prediction in robotic manipulation.

Humans learn by observing, interacting with environments, and internalizing physics and causality. Here, we aim to ask whether an agent can similarly acquire human-like reasoning from interaction and keep improving with more experience. We study this in a Game-to-Unseen (G2U) setting, curating 1,000+ heterogeneous games with diverse physical and causal mechanisms, and evaluate at three human-like levels: Survival, Curiosity, Utility, from primitive intuition to goal-driven reasoning. Our analysis reveals complementary failures: VLM/VLA agents reason but lack look-ahead in interactive settings, while world models imagine but imitate visual patterns rather than analyze physics and causality. We therefore propose IPR (Interactive Physical Reasoner), using world-model rollouts to score and reinforce a VLM's policy, and introduce PhysCode, a physics-centric action code aligning semantic intent with dynamics to provide a shared action space for prediction and reasoning. Pretrained on 1,000+ games, our IPR performs robustly on three levels, matches GPT-5 overall, and surpasses it on Curiosity. We find that performance improves with more training games and interaction steps, and that the model also zero-shot transfers to unseen games. These results support physics-centric interaction as a path to steadily improving physical reasoning.

Predictive Physical AI systems output state rollouts, action chunks, and latent plans, yet a low root-mean-square error (RMSE) does not imply that a particular proposal is physically executable. We formulate physical admissibility as a prediction-control interface: before execution, a decoded proposal is treated as candidate dynamics and evaluated using kinematic, dynamic, and direct-to-composed horizon conditions. Passing is not a certificate of task success; rejection identifies violation of the specified physical envelope and gives a component-level reason. On Hugging Face LeRobot PushT, controlled falsification shows that one-step prediction-RMSE and standardized dynamics residuals reach area under the receiver operating characteristic curve (AUC) 0.982 and 0.972, kinematic-only conditions reach AUC 0.592, and the full gate reaches AUC 0.957 with condition-level attribution. In replay-based intervention experiments, residual-based filters and the full physical-admissibility gate prevent 87-$89% of invalid proposals while preserving mean progress near 0.998.

Long-horizon physical-world agents must reason over distant goals while grounding decisions in reliable closed-loop behavior. Today's foundation models split these capabilities: vision-language models (VLMs) infer missing information and adapt high-level plans but remain brittle and inefficient at repeated navigation grounding, while navigation foundation models (NFMs) robustly execute semantic goals but operate as bounded episodes without persistent task-level reasoning. We introduce NavMCP, an agentic scaffolding framework that couples a VLM reasoning agent with an NFM executor for long-horizon exploration. The VLM decides what evidence to seek, where to search, and when to stop, while the NFM grounds each semantic sub-goal into closed-loop navigation. Three channels structure their collaboration: intent translates evidence needs into navigation calls, observation converts rollouts into source-grounded trajectory evidence, and memory accumulates findings, negative evidence, and unresolved goals across calls. This design turns isolated navigation rollouts into persistent embodied interaction without retraining either model. On Embodied Question Answering, NavMCP achieves state-of-the-art results on HM-EQA, MT-HM3D, and EXPRESS-Bench. Under matched agent and executor backbones, it outperforms an episodic interface by 14.9 percentage points on HM-EQA. On a Unitree Go2, NavMCP reaches 78.3% success, with its margin over the strongest baseline growing from 10 to 45 points as the task horizon increases. These results demonstrate the potential of scaffolding complementary foundation models into long-horizon physical-world agents.

Vision-language models can coordinate long-horizon robot manipulation, yet successful task reasoning still depends on whether local physical interactions produce the intended effects. We study how repeated interaction can improve this capability without updating the base model. We introduce RoboHarn-Evo, a dual-loop harness that evolves Hierarchical Physical Knowledge (HPK) from physical experience. HPK couples two levels of reusable knowledge: Task Knowledge captures which subtask should be executed and when it is complete, while Action Knowledge captures object-relative geometric strategies and their physical effects. During execution, the agent retrieves knowledge at the corresponding decision level and grounds it in the current scene under the task goal. Across episodes, physical feedback is used to revise historical knowledge, update its applicability, and organize reusable entries for subsequent retrieval. Experiments on RMBench show that HPK improves average success by up to 24.2 percentage points across different agent models. With 80 interaction rollouts, held-out success rises from 48.3% to 75.0% for GPT-5.5 and from 70.0% to 88.3% for GPT-6. RoboHarn-Evo also resolves over 83% of historical knowledge errors while retaining 95.8% of valid knowledge, and transfers zero-shot from RMBench to RoboDojo with gains of 35.0 and 25.0 percentage points. These results demonstrate that physical interaction can be accumulated into reusable knowledge for improving subsequent manipulation.

Long-horizon failure in world models is conventionally attributed to compounding error, a generic framing that does not distinguish what kind of error compounds. We propose a kinematic-vs-dynamic reframing: world models tend to imagine kinematically rather than dynamically. We operationalize this as the imagined Kinematic-Consistency Error, a per-step diagnostic that measures how far a rollout departs from a closed-form kinematic null, paired with a perturbation protocol that tests whether iKCE responds when physical conditions cross a regime boundary. We instantiate the diagnostic on a released DreamerV3 checkpoint trained on DMC walker-walk, where imagined iKCE runs roughly two orders of magnitude above that of matched real-physics rollouts. Across a friction sweep that crosses the gait-collapse boundary, the model's iKCE stays statistically flat even as the trained policy's reward collapses through the same range, providing the kinematic-not-dynamic signature. The diagnostic distinguishes kinematic from dynamic imagination at horizons longer than the embodiment's gait period.

Video-based interactive world models aim to enable real-time, user-controllable environments. Yet most existing systems are trained and rolled out at a fixed temporal rate, limiting both runtime-rate adaptation and physical-horizon coverage -- a limitation we term temporal-rate coupling. Specifically, when runtime generation throughput differs from the learned temporal rate, the generated world evolves unintentionally more slowly or quickly. Moreover, using a single temporal rate imposes an inherent trade-off between temporal granularity and physical horizon: higher rates capture finer motion but cover a shorter duration under a fixed context window. To address both limitations, we introduce Rate-Adaptive Rollout (RAR), a framework that enables interactive world models to roll out at controllable temporal rates. At its core, Stride-RoPE aligns latent frames sampled at different rates on a shared physical-time coordinate, enabling consistent multi-rate rollout, unseen-rate generalization, and online rate switching without discarding history. Meanwhile, RAR uses multi-stride video sampling to enable joint learning of fine-grained dynamics and long-horizon evolution. Across action- and camera-controlled environments, RAR achieves temporally consistent multi-rate rollout and online rate switching while preserving high-rate generation quality and extending physical horizons under matched training budgets. RAR also transfers to pretrained world models while preserving perceptual quality.

Embodied imitation learning is constrained by the scarcity of diverse, long-horizon robotic manipulation data. Existing video generation models for this domain are limited to synthesizing short clips of simple actions and often rely on manually defined trajectories. To this end, we introduce MIND-V, a hierarchical framework designed to synthesize physically plausible and logically coherent videos of long-horizon robotic manipulation. Inspired by cognitive science, MIND-V bridges high-level reasoning with pixel-level synthesis through three core components: a Semantic Reasoning Hub (SRH) that leverages a pre-trained vision-language model for task planning; a Behavioral Semantic Bridge (BSB) that translates abstract instructions into domain-invariant representations; and a Motor Video Generator (MVG) for conditional video rendering. MIND-V employs Staged Visual Future Rollouts, a test-time optimization strategy to enhance long-horizon robustness. To align the generated videos with physical laws, we introduce a GRPO reinforcement learning post-training phase guided by a novel Physical Foresight Coherence (PFC) reward. PFC leverages the V-JEPA world model to enforce physical plausibility by aligning the predicted and actual dynamic evolutions in the feature space. MIND-V demonstrates state-of-the-art performance in long-horizon robotic manipulation video generation, establishing a scalable and controllable paradigm for embodied data synthesis.

While large vision-language-action (VLA) models and generative world models (WM) have advanced long-horizon embodied intelligence, their practical deployment remains challenged by uncertainty in learning-based action generation. Low-quality actions may cause physical failures during execution or lead to misleading world-model rollouts with redundant rendering costs. To address this issue, we propose Pre-VLA, a unified runtime verification architecture that performs preemptive action validity assessment before physical execution or world-model imagination. Pre-VLA leverages an efficient multimodal backbone with modality-aware pooling and a lightweight dual-branch head to predict both safety confidence and critic-derived advantage scores for candidate action chunks. To handle severe class imbalance and unstable boundary decisions, we train Pre-VLA with a multi-task objective combining Focal classification, advantage regression, and soft-threshold calibration. During deployment, a dual-mode preemptive resampling scheduler filters low-quality actions and triggers adaptive resampling under a limited computation budget. Experiments on the LIBERO benchmark show that Pre-VLA improves the average closed-loop success rate across four suites from 30.79\% to 37.62\% over RynnVLA-002, reduces task execution steps, achieves 183.9 ms average forward verification time per action chunk, and mitigates error accumulation in world-model rollouts.

Action-conditioned world models are a key component of embodied AI, serving as scalable policy evaluators that reduce reliance on expensive real-world rollouts. To accurately capture diverse action-induced dynamics, such models should satisfy three key objectives-Physical Plausibility (P), Action Adherence (A), and Visual Fidelity (V), collectively referred to as PAV-while remaining robust to both in-distribution (ID) expert demonstrations and out-of-distribution (OOD) actions. However, existing methods primarily rely on ID action-video pairs and pixel-level reconstruction losses, which do not explicitly optimize PAV objectives and generalize poorly beyond expert data. To address this, we propose PAVXploreRL, a reinforcement learning framework built on a pretrained latent world model that explicitly optimizes PAV objectives through reward-driven training. To improve action generalization, our method jointly leverages ID trajectories and noise-driven OOD action exploration, without paired video supervision. Experiments show that PAVXploreRL consistently outperforms pretrained baselines, achieving a 5.6% average gain across benchmarks and producing higher-quality PAV properties. As a policy evaluator, it also yields more reliable performance estimates and reduces the overestimation bias of prior expert-only world models such as Ctrl-World. Code: https://github.com/Social-AI-Studio/PAVXploreRL

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

Open-vocabulary long-horizon manipulation requires robots to reason over flexible instructions and complex multi-object scenes while adaptively planning, executing, monitoring, and recovering from failures. We address these demands with a closed agent loop in which a VLM orchestrates heterogeneous robot capabilities as interruptible tools. Unlike in virtual AI agents, the timing of decisions, actions and tool calls is important in a physical world that does not pause for reasoning. We refer to this setting as Physical Orchestration, and propose VoLoAgent, a VLM that plans, monitors, and recovers by treating a VLA/WAM as an interruptible tool it steers mid-rollout alongside vision models and action primitives. To evaluate these long-horizon capabilities, we introduce RoboVoLo, a high-fidelity benchmark for open-vocabulary long-horizon manipulation across common sense, memory/state tracking, complex references, and world knowledge, with both task-level success and failure-mode diagnostics. Experiments show VoLoAgent substantially outperforms single VLA/VLM or tool-based systems, with validation on real-robot experiments. Project page: https://chicychen.github.io/VoLo/

World models are transitioning from passive visual generators to foundational, operational infrastructure for Physical AI: they must natively acquire world knowledge from heterogeneous experience, maintain persistent states over long horizons, and execute efficiently within real deployment constraints. We introduce Kairos, a native world model stack designed around these requirements. (1) Kairos learns the world by pioneering a Native Pre-training Paradigm governed by a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into a progressive developmental pathway. (2) Kairos maintains the world by unified world understanding, generation, and prediction within a Native Unified Architecture equipped with Hybrid Linear Temporal Attention, where sliding-window attention captures local dynamics, dilated sliding windows capture mid-range dependencies, and gated linear attention maintains persistent global memory. We establish formal theoretical bounds demonstrating that this temporal factorization strictly limits error accumulation, mathematically guaranteeing state propagation across extended horizons. (3) Kairos runs the world by incorporating a Deployment-Aware System Co-Design to support low-latency rollout generation on server and consumer-grade hardware for real-world observation-action-feedback loops. Experiments on embodied world-model, long-horizon, and action-policy benchmarks show that Kairos achieves top level performance while offering a strong efficiency-capability trade-off. Together, these results position Kairos as a cohesive operational foundation for future self-evolving physical intelligence.

Embodied agents are increasingly used to close the gap left by end-to-end policy models. Yet the agentic path has not realized closed-loop learning in physical execution: existing harnesses remain largely open-loop, following fixed skills during rollout and reflecting only after an episode completes. Such post-hoc reflection cannot govern execution as it unfolds, because physical interaction requires decisions to track rapidly changing robot-environment states at a frequency beyond today's large agentic models. We present Zetta, a closed-loop embodied harness that evolves code-based runtime critics and recovery skills online while keeping the base policy frozen. Through three timescale-separated loops, Zetta provides action-frequency governance, rollout-level critic-recovery proposal, and validation-gated skill updates. Together with Z-Infra, a rollout infrastructure decoupling agent logic from heterogeneous execution resources, Zetta achieves state-of-the-art success on LIBERO-Pro and RoboCasa under our current rollout budget, reaching 90.8% and 93.6%, with an 11.1x inference speedup; success continues to scale with self-exploration experience; learned skills transfer zero-shot, and clear robotic "Aha Moments" emerge. These results show that closed-loop harness self-evolution opens a scaling path for reliable physical intelligence.

Machine learning approaches to spatiotemporal physical systems have primarily focused on next-frame prediction, with the goal of learning an accurate emulator for the system's evolution in time. However, these emulators are computationally expensive to train and are subject to performance pitfalls, such as compounding errors during autoregressive rollout. In this work, we take a different perspective and look at scientific tasks further downstream of predicting the next frame, such as estimation of a system's governing physical parameters. Accuracy on these tasks offers a uniquely quantifiable glimpse into the physical relevance of the representations of these models. We evaluate the effectiveness of general-purpose self-supervised methods in learning physics-grounded representations that are useful for downstream scientific tasks. Surprisingly, we find that not all methods designed for physical modeling outperform generic self-supervised learning methods on these tasks, and methods that learn in the latent space (e.g., joint embedding predictive architectures, or JEPAs) outperform those optimizing pixel-level prediction objectives. Code is available at https://github.com/helenqu/physical-representation-learning.

Recent visual generators produce high-fidelity images yet often violate physical consistency under ego-motion, limiting their use for spatial reasoning and embodied planning. Existing benchmarks largely focus on isolated images or single-step quality, leaving this challenge underexplored. We introduce EgoGenEval, a geometry-grounded, pose-free benchmark designed to evaluate the physical consistency of visual generators under ego-motion, and organize our study into two parts. (1) EgoGenEval contains 1,400 cases and 2,360 target views spanning single-step and multi-step ego-motion. It separately measures Camera Motion Grounding (CMG) and Scene State Preservation (SSP), with both metrics validated against blinded human judgments. Evaluating 16 pose-free generators together with two pose-conditioned references reveals that current models struggle to execute camera motion while maintaining scene state, and that no system performs well on both axes at once. (2) To examine whether benchmark-derived data can improve these capabilities, we build EgoGen-Train from the same geometry-grounded pipeline and run controlled SFT studies. These show that pairwise supervision does not reliably improve camera-motion grounding and scene-state preservation together: even at the full training pool and the longest budget, scene preservation gains a fraction of what camera motion does. This points to the pairwise teacher-forced objective itself as the binding constraint, motivating a trajectory-centric paradigm that couples self-conditioned rollouts with explicit pose and visibility supervision.

Modeling physical dynamics, including how objects move, interact, and change state, is central to video world models for embodied AI. We present StrucPhysVideo, a family of video world models that bridges physics-focused data curation with language- and action-conditioned prediction of scene evolution. Our data pipeline combines motion-aware video segmentation, quality and content filtering, and physical relevance verification with structured annotations of objects, materials, and temporally localized interactions. By disentangling camera motion from object behavior and explicitly describing contact, deformation, and state transitions, the pipeline provides supervision grounded in observable physical events. Building on these data, we introduce StrucPhysVideo-TI2V, a sparse Mixture-of-Experts (MoE) text-image-to-video model trained with a curriculum that progressively emphasizes physical dynamics while retaining general-domain video data. StrucPhysVideo-TI2V achieves state-of-the-art performance on Physics-IQ Verified, scoring 45.5% and outperforming Cosmos3-Super-Image2Video by 2.8 percentage points. Caption ablations across backbones further demonstrate the effectiveness of physics-focused supervision. We further extend StrucPhysVideo-TI2V to StrucPhysVideo-IA2V, an interactive image-action-to-video world model that predicts visual outcomes from robot end-effector commands. Action conditioning, causal autoregressive generation, and few-step distillation enable incremental robot rollouts with only four denoising steps. Together, StrucPhysVideo advances physical dynamics modeling from image- and language-conditioned video prediction toward action-driven interaction.

Learned simulators for deformable linear objects (DLOs) such as cables have to predict the motion of cables they were not trained on and stay stable over long rollouts. Most of their error occurs where the cable touches itself or the floor. Attention over all pairs of cable segments can represent contact between parts of the cable that are far apart along its length, but attention has no notion of geometry. A cable has two pairwise distances, which agree only while it is straight: the arc-length distance along the cable, which governs elastic forces, and the Euclidean distance in space, which governs contact. We add a physical attention bias, an additive term on the attention logits with a learned rate, and ask which distance it should use. We compare no bias, each distance alone, and both distances on disjoint sets of heads, keeping the rest of the model and the training protocol fixed. A physical bias improves prediction on unseen cables. The gain is largest when attention is the only mechanism that connects distant segments: there, the arc-length bias reduces prediction error by 15% and more than halves the drift in segment length. The Euclidean bias alone stays close to unbiased attention, while assigning both distances across heads is best or near-best on every metric we report. Code and per-run records: https://github.com/avihaig/dlogps.

When adapting Vision Language Action (VLA) models to downstream tasks, multiple rounds of post-training are often required to progressively address policy weaknesses. In this report, we focus on maximizing human efficiency during this iterative process, measured by policy improvement and task throughput per unit of human labor and time. We propose HELP, a Human-Efficient Large-scale robot Post-training pipeline in which two specialized operators supervise twelve robots concurrently. A trained Teleoperator provides high-value remote interventions and recovery demonstrations, while a Floor Operator monitors the robot fleet, triggers takeovers, and performs physical resets. This role specialization improves human efficiency by reducing task switching, lowering operator training costs, and expanding robot interaction coverage. Beyond increasing rollout volume, concurrent supervision also broadens the range of policy behaviors observed by the human team, making recurring failure modes easier to identify and enabling more targeted takeovers, resets, and recovery demonstrations. To efficiently utilize the large and mixed-quality rollout data, HELP incorporates \vlac, an automatic rollout segmentation critic specifically designed for this setting. It separates autonomous trajectories into progress-making, idle, failure-inducing, and recovery segments. Useful rollout segments are retained and combined with Human-in-the-Loop data for the next post-training round. Across four real-world manipulation tasks, HELP achieves 80\%--95\% success rates and improves task throughput by 1.7times--4.2times over the base model. Under matched HITL recovery budgets, VLAC-CUT further amplifies throughput gains by 1.20times--3.43times and success-rate gains by 1.50times--3.00times over HITL-only updates.

A world model is an AI system that simulates how an environment evolves under actions, enabling planning through imagined futures rather than reactive perception. Current world models, however, suffer from visual conflation: the mistaken assumption that high-fidelity video generation implies an understanding of physical and causal dynamics. We show that while modern models excel at predicting pixels, they frequently violate invariant constraints, fail under intervention, and break down in safety-critical decision-making. This survey argues that visual realism is an unreliable proxy for world understanding. Instead, effective world models must encode causal structure, respect domain-specific constraints, and remain stable over long horizons. We propose a reframing of world models as actionable simulators rather than visual engines, emphasizing structured 4D interfaces, constraint-aware dynamics, and closed-loop evaluation. Using medical decision-making as an epistemic stress test, where trial-and-error is impossible and errors are irreversible, we demonstrate that a world model's value is determined not by how realistic its rollouts appear, but by its ability to support counterfactual reasoning, intervention planning, and robust long-horizon foresight.

Autoregressive models accumulate error over long rollouts, yet at deployment there is no ground truth to measure it against. We train a single conditional latent diffusion model that steps a dynamical system forward or backward in time via a direction flag, and show that this bidirectionality supplies a measurement-free test-time error signal: rolling forward i steps and then backward i steps must return the model to its start, so the round-trip discrepancy C_i is a self-supervised proxy for the unobservable rollout error: no ensembles, no held-out data, no governing equations, for one extra rollout. We validate on compressible magnetohydrodynamics (MHD), an astrophysical turbulent radiative mixing layer, and natural face videos (CelebV-HQ). On held-out MHD trajectories, C_i ranks rollout error (Spearman 0.91-0.98 at fixed depth; 0.69 pm 0.16 within trajectories), and a simple calibrator fit on training rollouts predicts its magnitude to within 1.14times (68%) and 1.29times (95%) with near-nominal coverage - one nat beyond a depth-only predictor, transferring to all six decoded physical fields. The same signal flags the out-of-distribution Orszag-Tang vortex (AUROC 0.98; 1.0 by depth 10) exactly where sampling-dispersion baselines invert, and it cuts incurred error by 15% at 80% coverage - three times the depth-only baseline. Bidirectional training comes at negative cost, beating direction specialists in both directions, and the backward direction doubles as a fast inverse solver. On LE-PDE-UQ's turbulent Navier-Stokes benchmark, a single bidirectional model reaches accuracy within 1.3times of their ten-model ensemble at a tenth of the training cost, with the best training-free pixel-level calibration. Round-trip consistency turns reversibility into a practical trust signal for generative models.

Embodied AI is moving from isolated perception or action modules toward physical agents that understand, plan under goals, act through robot bodies, monitor progress, and improve from experience. Existing systems address this loop only in parts: end-to-end policies generate actions but often lack spatial reasoning, planning, and execution assessment, while robot-agent systems orchestrate tools or specialists but do not learn a shared representation. This fragmentation limits general Physical Agentic AI. We present ACE-Brain-0.5, a unified embodied foundation model that organizes robot intelligence into five coupled functions: spatial perception, decision making, embodied interaction, self-monitoring, and self-improvement. Built on ACE-Brain-0, which established spatial intelligence as a shared scaffold across robot platforms, ACE-Brain-0.5 extends an understanding-centric model into a closed-loop foundation model. A single 8B backbone instantiates the first four functions: grounding objects and affordances, reasoning over 3D and egocentric spatial relations, decomposing instructions into subgoals, generating navigation and manipulation actions, and estimating progress for verification and recovery. To unify these capabilities without cross-task interference, we introduce SSR+, which extends Scaffold-Specialize-Reconcile with a Reactivate stage after task-vector merging. The fifth function, self-improvement, is realized by a companion framework that updates external execution state, including task schemas, spatial memory, and failure-recovery cases, from rollouts. Across fifteen benchmarks, ACE-Brain-0.5 improves over ACE-Brain-0 on 14 of 18 spatial perception and grounding benchmarks, achieves competitive navigation and manipulation performance, and provides strong progress estimation in ID and OOD settings. Together, these results mark an early step toward general Physical Agentic AI.

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill times constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL_f-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

Satellite agents for on-orbit navigation tasks need to predict collision risks using limited onboard observations. However, conventional planners often rely on predefined maps and fixed environmental assumptions, limiting their adaptability in dynamic on-orbit scenarios. In this paper, we propose Orbit-Planner, a two-stage latent world model for on-orbit obstacle avoidance. Orbit-Planner learns action-conditioned spacecraft dynamics to perform future-state rollouts in latent space, and introduces a Physics Probe to decode physical state changes from imagined latent trajectories. Experiments demonstrate that Orbit-Planner can perform long-horizon latent rollouts and recover physical states from imagined trajectories. In closed-loop obstacle-avoidance navigation in Isaac Sim, it attains a success rate of 91.7%. Code is available at https://github.com/ZhijianLi2003/Orbit_Planner.

Accurately anticipating how complex, diverse scenes will evolve requires models that represent uncertainty, simulate along extended interaction chains, and efficiently explore many plausible futures. Yet most existing approaches rely on dense video or latent-space prediction, expending substantial capacity on dense appearance rather than on the underlying sparse trajectories of points in the scene. This makes large-scale exploration of future hypotheses costly and limits performance when long-horizon, multi-modal motion is essential. We address this by formulating the prediction of open-set future scene dynamics as step-wise inference over sparse point trajectories. Our autoregressive diffusion model advances these trajectories through short, locally predictable transitions, explicitly modeling the growth of uncertainty over time. This dynamics-centric representation enables fast rollout of thousands of diverse futures from a single image, optionally guided by initial constraints on motion, while maintaining physical plausibility and long-range coherence. We further introduce OWM, a benchmark for open-set motion prediction based on diverse in-the-wild videos, to evaluate accuracy and variability of predicted trajectory distributions under real-world uncertainty. Our method matches or surpasses dense simulators in predictive accuracy while achieving orders-of-magnitude higher sampling speed, making open-set future prediction both scalable and practical. Project page: http://compvis.github.io/myriad.

Video-based world models generate visually plausible rollouts, but since they infer dynamics in latent states, they enforce no explicit physical constraints: contacts drift, shapes distort, and motion loses consistency. We present ChronoAgentic, a multi-agent framework that instead constructs the world as executable simulation code. The plan agent converts the natural-language prompt into a structured scene plan that the user can inspect and approve. The code agent implements the plan as an executable PyChrono program, grounded in a curated skill library, a generative 3D asset pipeline, and retrieval over the simulator source. After execution, the visual-analysis agent describes the rendered rollout, while deterministic physics checks scan the simulated trajectories for anomalies. The review agent evaluates this execution evidence, and the code agent iteratively repairs the program until it satisfies the plan objectives and physical constraints. On a suite of 80 demos selected from the PhyWorldBench benchmark, ChronoAgentic satisfies the benchmark's full correctness criterion--semantic adherence and physical correctness judged jointly---on 82.5% of demos, against 52.5% for the strongest of ten text-to-video models, scored under the same criterion on their officially released benchmark videos. The same construction loop extends to interactive use, including a live ROS driving environment in a generated city. The project page is available at https://uwsbel.github.io/chrono-agentic-website/.

Recently, video-based world models that learn to simulate the dynamics have gained increasing attention in robot learning. However, current approaches primarily emphasize visual generative quality while overlooking physical fidelity, dynamic consistency, and task logic, especially for contact-rich manipulation tasks, which limits their applicability to downstream tasks. To this end, we introduce ReWorld, a framework aimed to employ reinforcement learning to align the video-based embodied world models with physical realism, task completion capability, embodiment plausibility and visual quality. Specifically, we first construct a large-scale (~235K) video preference dataset and employ it to train a hierarchical reward model designed to capture multi-dimensional reward consistent with human preferences. We further propose a practical alignment algorithm that post-trains flow-based world models using this reward through a computationally efficient PPO-style algorithm. Comprehensive experiments and theoretical analysis demonstrate that ReWorld significantly improves the physical fidelity, logical coherence, embodiment and visual quality of generated rollouts, outperforming previous methods.

We introduce WorldOracle, a benchmark specifically designed to evaluate action-conditioned world models (ACWMs) against paired real-world executions. Given the same initial observation and low-level action sequence, WorldOracle asks whether a predicted rollout reproduces what happens in the real world, including physical consequences and task-state transitions. We evaluate models along four complementary dimensions: physical state correctness, interaction spatial alignment, key interaction area fidelity, and multi-view action coherence. To support this evaluation, we curate real-world training and evaluation suites that cover different interaction dynamics and embodiments. The evaluation suite contains long, multi-segment episodes with both successful and failed executions, enabling evaluation across varied action outcomes and behavior distributions. Experiments on seven representative ACWMs reveal distinct model strengths and failure modes. WorldOracle provides a systematic foundation for measuring and advancing action-conditioned world modeling for manipulation. We will release the datasets, evaluation code, and leaderboard.

Despite the sustained scaling on model capacity and data acquisition, Vision-Language-Action (VLA) models remain brittle in contact-rich and dynamic manipulation tasks, where minor execution deviations can compound into failures. While reinforcement learning (RL) offers a principled path to robustness, on-policy RL in the physical world is constrained by safety risk, hardware cost, and environment reset. To bridge this gap, we present RISE, a scalable framework of robotic reinforcement learning via imagination. At its core is a Compositional World Model that (i) predicts multi-view future via a controllable dynamics model, and (ii) evaluates imagined outcomes with a progress value model, producing informative advantages for the policy improvement. Such compositional design allows state and value to be tailored by best-suited yet distinct architectures and objectives. These components are integrated into a closed-loop self-improving pipeline that continuously generates imaginary rollouts, estimates advantages, and updates the policy in imaginary space without costly physical interaction. Across three challenging real-world tasks, RISE yields significant improvement over prior art, with more than +35% absolute performance increase in dynamic brick sorting, +45% for backpack packing, and +35% for box closing, respectively.

Text-conditioned motion generation is a promising interface for programming humanoid robots, yet current generators are often trained on human motion datasets retargeted to robot morphologies. Although such data provides rich semantic and kinematic priors, it fails to capture the nuances of whole-body tracking controllers, including balance, contact dynamics, actuation limits, and controller-specific failure modes. As a result, generated motions can be semantically plausible but difficult or impossible for the robot to execute. We introduce TEXEDO, a test-time scaling framework for humanoid motion generation that improves motion quality without requiring a stronger underlying generator. Given a text prompt, TEXEDO samples multiple candidate motions from a pretrained text-conditioned generator and selects the best motion that is both executable and task-aligned. The reward model combines a dynamic feasibility verifier, distilled from whole-body tracking rollouts to predict physical executability, with a semantic alignment verifier that measures text-motion alignment in a learned co-embedding space. Our pipeline treats dynamic feasibility as a hard constraint and semantic alignment as the selection objective within the feasible set. Through large-scale simulation studies and real-world deployment on a Unitree G1 humanoid robot, we show that TEXEDO consistently improves both tracking fidelity and text alignment. These results demonstrate that grounded verification is an effective path toward deployable language-guided humanoid motion generation. Project website: https://jianuocao.github.io/TEXEDO/

Graphical user interface (GUI) agents build on vision-language models to complete user tasks end-to-end in real applications through interface actions such as tapping, swiping, text entry, and navigation. However, existing GUI agents are trained and evaluated largely on offline trajectories, simulated environments, and standardized benchmarks. These differ substantially from real applications in interface layout, interaction logic, and abnormal-state distribution, and cannot faithfully characterize execution stability in real-world use, where account states, permission dialogs, payment authentication, and risk control continually reshape the state distribution and open a persistent gap between benchmark scores and real usability. To close this gap, we propose Xiaomi-GUI-0, a native multimodal GUI agent for real mobile environments, trained and evaluated within a real-device closed loop. At its core is a real-device-dominant hybrid infrastructure, where physical devices are the primary execution environment and sandboxes provide auxiliary support, so that data collection, training, rollout, and evaluation share an execution distribution close to real deployment. We construct multi-source training data spanning high-frequency head tasks, high-generalization data for long-tail intents, and capability-enhancement data for reflection and memory, and introduce an error-driven data flywheel that turns failure trajectories into corrected actions, reflective explanations, and recovery demonstrations. The model is trained through a progressive three-stage pipeline of supervised fine-tuning, step-level reinforcement learning, and agentic reinforcement learning. Evaluated on public benchmarks and our in-house RealMobile, Xiaomi-GUI-0 achieves 72.0% success on RealMobile and 78.9% on AndroidWorld, while substantially improving execution stability and abnormal-state recognition in real-world tasks.

Recent video generation models are increasingly framed as world models. Many physical processes can unfold in more than one valid way. Therefore, a world model should reproduce not only a plausible trajectory, but also the distribution of possible behaviors under the same initial observation and action. We call this distribution-level requirement probabilistic alignment. However, existing evaluations largely assess individual-video plausibility and do not test whether repeated generations recover the correct distribution. This raises a central question: how far are current video generators from probabilistically aligned world modeling? To answer it, we formalize probabilistic alignment as a distributional criterion for world models and introduce PAWBench, a benchmark for evaluating video generators as stochastic samplers of world dynamics. We further introduce PAWEval, an outcome-level protocol that converts repeated video rollouts into empirical distributions over possible physical behaviors. Across 50 scenarios and eleven current systems, no model consistently matches the reference probabilities while recovering the range of valid behaviors. Having established this gap, we test whether language prompts, initial noise sampling, or model training can reshape the model's predictive distribution. We believe our work can serve as a foundation for future efforts to move towards probabilistically aligned world modeling.

We introduce multi-task Visuo-Tactile World Models (VT-WM), which capture the physics of contact through touch reasoning. By complementing vision with tactile sensing, VT-WM better understands robot-object interactions in contact-rich tasks, avoiding common failure modes of vision-only models under occlusion or ambiguous contact states, such as objects disappearing, teleporting, or moving in ways that violate basic physics. Trained across a set of contact-rich manipulation tasks, VT-WM improves physical fidelity in imagination, achieving 33% better performance at maintaining object permanence and 29% better compliance with the laws of motion in autoregressive rollouts. Moreover, experiments show that grounding in contact dynamics also translates to planning. In zero-shot real-robot experiments, VT-WM achieves up to 35% higher success rates, with the largest gains in multi-step, contact-rich tasks. Finally, VT-WM demonstrates significant downstream versatility, effectively adapting its learned contact dynamics to a novel task and achieving reliable planning success with only a limited set of demonstrations.

Evaluating world models requires assessing both the quality of the worlds they generate and their consistency and responsiveness under exploration, interaction, and modification. We introduce HappyWorld-Bench, a comprehensive benchmark that evaluates whether generated worlds remain reliable as agents interact with them. Our design is built on a hierarchical capability framework of six world capabilities (W1-W6), from generative construction to unified world modeling, instantiated across three independent evaluation tracks: video world models, spatial world models, and embodied world models. HappyWorld-Bench comprises 1,138 video prompts, 300 spatial scenes, and 254 embodied test cases. Across all three tracks, we build and operate HappyWorld-Arena to organize human A/B comparisons and derive model-level Elo ratings, which complement newly designed automated metrics that capture behavioral correctness. We evaluate 14 video world models, 9 spatial systems, and 8 embodied candidates under this unified framework. Results reveal remaining reliability gaps across all three tracks: video models exhibit reduced consistency during extended rollouts and revisits, spatial models achieve at best 70.14% placement accuracy and 73.33% edit execution, and embodied models struggle to preserve state across multi-step actions and respond precisely to altered action conditions and physical rules. These findings highlight the need to evaluate world models not only by visual quality, but also by state consistency and the correctness of their responses to actions and interventions.

Foundation models have revolutionized natural language processing through a ``train once, deploy anywhere'' paradigm, where a single pre-trained model adapts to countless downstream tasks without retraining. Access to a Physics Foundation Model (PFM) would be transformative -- democratizing access to high-fidelity simulations, accelerating scientific discovery, and eliminating the need for specialized solver development. Yet current physics-aware machine learning approaches remain fundamentally limited to single, narrow domains and require retraining for each new system. We present the General Physics Transformer (GPhyT), trained on 1.8 TB of diverse simulation data, that demonstrates foundation model capabilities are achievable for physics. Our key insight is that transformers can learn to infer governing dynamics from context, enabling a single model to simulate fluid-solid interactions, shock waves, thermal convection, and multi-phase dynamics without being told the underlying equations. GPhyT achieves three critical breakthroughs: (1) superior performance across multiple physics domains, outperforming specialized architectures by up to 29x, (2) zero-shot generalization to entirely unseen physical systems through in-context learning, and (3) stable long-term predictions through 50-timestep rollouts. By establishing that a single model can learn generalizable physical principles from data alone, this work opens the path toward a universal PFM that could transform computational science and engineering.

Generalist robot policies increasingly benefit from large-scale pretraining, but offline data alone is insufficient for robust real-world deployment. Deployed robots encounter distribution shifts, long-tail failures, task variations, and human correction opportunities that fixed demonstration datasets cannot fully capture. We present Learning While Deploying (LWD), a fleet-scale offline-to-online reinforcement learning framework for continual post-training of generalist Vision-Language-Action (VLA) policies. Starting from a pretrained VLA policy, LWD closes the loop between deployment, shared physical experience, policy improvement, and redeployment by using autonomous rollouts and human interventions collected across a robot fleet. To stabilize learning from heterogeneous, sparse-reward fleet data, LWD combines Distributional Implicit Value Learning (DIVL) for robust value estimation with Q-learning via Adjoint Matching (QAM) for policy extraction in flow-based VLA action generators. We validate LWD on a fleet of 16 dual-arm robots across eight real-world manipulation tasks, including semantic grocery restocking and 3--5 minute long-horizon tasks. A single generalist policy improves as fleet experience accumulates, reaching an average success rate of 95%, with the largest gains on long-horizon tasks.

Generalist robot intelligence is often framed as a policy-scaling problem: collect more robot demonstrations, train larger Vision-Language-Action (VLA) models, and expect broader generalisation. In this position paper, we argue that this framing is incomplete. The central bottleneck is not only policy learning, but the absence of mechanisms that convert the world's abundant unstructured behavioural data into grounded robot supervision. Human motion, internet video, simulation rollouts, and interactive demonstrations contain rich information about tasks, goals, contacts, failures, and physical constraints, yet most of this information is not directly usable by robot policies because it lacks embodiment-specific action labels, task semantics, and reward structure. We identify four missing components for the next generation of robotics: data interfaces for autolabelling unstructured behaviour, embodiment interfaces for retargeting human motion to robot actions, world-model interfaces for physics-grounded 3D reasoning, and reward interfaces for inferring task progress and success from video and language. We survey recent progress in robot foundation models, cross-embodiment datasets, learning from video, world models, and reward modelling, and propose a research agenda for building robotics systems that can learn not only from robot demonstrations, but from the broader physical world.

Deformable object manipulation poses challenges beyond task completion: successful execution must also maintain safe physical interaction, holding the object stably without slip or drop while avoiding excessive deformation. However, existing manipulation benchmarks are predominantly success-oriented and rarely evaluate whether a policy remains physically safe throughout execution. We present SoftVTBench, a safety-aware visuo-tactile benchmark for physically constrained deformable object manipulation. Built in Isaac Sim with finite-element-simulated deformable objects, SoftVTBench provides multi-view RGB observations, RGB tactile sensing with marker motion, proprioception, and language instructions, and defines four matched task suites over object type (deformable vs. rigid) and variation axis (object vs. spatial). It separately reports Goal Success and Safety Success; the latter additionally requires no drop and peak deformation below a calibrated object-specific threshold, measured from policy-hidden privileged Finite Element Method (FEM) states. We implement pi0.5-based baselines under this protocol. Experiments show that success-only evaluation substantially overstates policy performance, as a large fraction of goal-completing rollouts still violate physical safety. Furthermore, incorporating tactile sensing improves Safety Success (e.g., from 21.4% to 35.6% on object-centric deformable tasks) and reduces object deformation during execution, while maintaining comparable Goal Success. SoftVTBench provides a reproducible benchmark for studying visuo-tactile deformable manipulation under physical interaction constraints.

Achieving dexterous robotic manipulation in the real world heavily relies on human supervision and algorithm engineering, which becomes a central bottleneck in the pursuit of general physical intelligence. Although emerging coding agents can generate code to automate algorithm search, their successes remain largely confined in digital environments. We conjecture that the missing abstraction to automate robotics research is a repeatable feedback loop for real-world policy improvement: reset the scene, execute a policy, verify the outcome, and refine the next iteration. To bridge this gap, we introduce ENPIRE, a harness framework for coding agents that instantiates this physical feedback routine with four core modules: an Environment module (EN) for automatic reset and verification, a Policy Improvement module (PI) that launches policy refinement, a Rollout module (R) to evaluate policies with one or multiple physical robots operating in parallel, and an Evolution module (E) in which coding agents analyze logs, consult literature, improve training infrastructure and algorithm code to address failure modes. This closed-loop system transforms real-world manipulation learning into a controllable optimization procedure, minimizing human effort while allowing fair ablations across training recipe and agent variants. Powered by ENPIRE, frontier coding agents can autonomously train a policy to achieve a 99% success rate on challenging, dexterous manipulation tasks, such as organizing a pin box, fastening a zip tie, and tool use, a process that further accelerates when we dispatch an agent team on a robot fleet. Our results suggest a practical and scalable path toward deploying coding agents to autonomously advancing robotics in the physical world.

Advances in generative models have improved video fidelity, enabling long-horizon generation, interactive world modeling, and evolving visual environments. Autoregressive (AR) video generation extends visual sequences through causal rollouts. However, a fundamental bottleneck emerges: as the generated sequence expands, practical models must operate under strictly bounded context windows, storage, and computational limits. Consequently, critical historical information, e.g., entity identities, dynamic states, and intervention-induced causal changes, often leaves the active context long before its relevance diminishes. Overcoming this limitation and maintaining temporal persistence constitutes a fundamental memory problem. We present a systematic and comprehensive review of memory mechanisms in AR video generation. We formulate memory operationally as persistent historical information maintained across outer AR steps, capable of influencing future generation even after the originating evidence is no longer locally accessible. Building upon this unified framework, we organize the literature through five complementary perspectives: (I) Forms, the representational carriers of history; (II) Functions, the specific semantic and physical information requiring preservation; (III) Operations, the lifecycle of writing, reading, updating, managing, and integrating memory; (IV) Learning, the optimization of memory behaviors under closed-loop rollouts; and (V) Evaluation, the paradigms for diagnosing genuine memory capabilities. We conclude by synthesizing open challenges, including composable and resource-aware memory architectures, trustworthy state updating, self-rollout learning, and standardized evaluation. By bridging representations, mechanisms, and learning paradigms, this paper establishes a structured foundation for developing reliable, memory-conditioned video generation systems.

We introduce ROLL, an efficient, scalable, and user-friendly library designed for Reinforcement Learning Optimization for Large-scale Learning. ROLL caters to three primary user groups: tech pioneers aiming for cost-effective, fault-tolerant large-scale training, developers requiring flexible control over training workflows, and researchers seeking agile experimentation. ROLL is built upon several key modules to serve these user groups effectively. First, a single-controller architecture combined with an abstraction of the parallel worker simplifies the development of the training pipeline. Second, the parallel strategy and data transfer modules enable efficient and scalable training. Third, the rollout scheduler offers fine-grained management of each sample's lifecycle during the rollout stage. Fourth, the environment worker and reward worker support rapid and flexible experimentation with agentic RL algorithms and reward designs. Finally, AutoDeviceMapping allows users to assign resources to different models flexibly across various stages.

Spatial augmented reality (SAR) augments physical environments with projected content, but most systems assume that the projector pose, target region, or motion path has been fixed or specified. We instead make projected light an embodied action: given a language instruction and current visual observations, a system must decide how to move and where and at what scale to place the projection. We introduce LICOA to realize this capability. Its differential-drive chassis provides room-scale approach and repositioning, while a steerable mirror with two degrees of freedom (2DoF) and projection scale provide rapid local control of the beam. A shared interface maps synchronized external and onboard RGB cameras with robot control state to physical optical actions across pretrained action models. Because instruction-conditioned optical action lacks dedicated training data and a common evaluation protocol, we construct a matched simulation embodiment and a corpus with 150 tasks and 7,500 rendered episodes, then evaluate models trained only on this corpus in previously unseen real-world environments. Across 480 complete closed-loop real-world execution trials (rollouts) on 12 tasks, the best adapted action model achieves a 57.50% success rate and 40.64% success weighted by path length, compared with 8.33% and 5.15% for the same architecture trained from scratch. A further 150 real-world ablation rollouts support the need for both camera views and coordinated control of the chassis and mirror. These results establish a physical platform, shared perception and optical action interface, corpus, and real-world evaluation protocol for treating projected light as an embodied action.

Rollout generation is a major bottleneck in Reinforcement Learning (RL) for Mixture-of-Experts (MoE) Large Language Models, motivating low-precision rollout acceleration such as FP8. As an emerging low-precision format, NVFP4 combines fine-grained scaling for accuracy preservation with native W4A4 FP4 GEMMs for higher throughput than FP8. However, we find that directly applying NVFP4 to MoE RL rollout is impractical. NVFP4 rollout with BF16 training collapses after roughly 150 steps, accompanied by rapidly growing rollout-trainer log-probability gaps. Through training-inference error analysis and controlled ablations, we identify activation error, rather than weight error, as the dominant source of FP4 RL instability: weights can be synchronized and aligned by a shared quantization-dequantization path, whereas activations are recomputed online and error is amplified by the coarse E2M1 grid. Therefore, to stabilize NVFP4 RL for MoE, we propose QUantization-error Alignment across Dual Sides (QUADS). On the trainer side, we introduce Asymmetric Quantization-Aware Training fake-quantizing weights while keeping activations unquantized for better alignment. On the rollout side, Residual Activation Compensation corrects high-error activation channels while preserving native W4A4 GEMMs. In our MoE RL experiments on several benchmarks, QUADS achieves BF16-level accuracy, improves average pass@1 by 21.49 points over naive NVFP4 RL, and delivers ~16% higher rollout throughput than FP8.

The goal of this paper is to improve the performance and reliability of vision-language-action (VLA) models through iterative online interaction. Since collecting policy rollouts in the real world is expensive, we investigate whether a learned simulator-specifically, an action-conditioned video generation model-can be used to generate additional rollout data. Unfortunately, existing world models lack the physical fidelity necessary for policy improvement: they are predominantly trained on demonstration datasets that lack coverage of many different physical interactions (particularly failure cases) and struggle to accurately model small yet critical physical details in contact-rich object manipulation. We propose a simple iterative improvement algorithm that uses real-world roll-out data to improve the fidelity of the world model, which can then, in turn, be used to generate supplemental synthetic data for improving the VLA model. In our experiments on a real robot, we use this approach to improve the performance of a state-of-the-art VLA model on multiple downstream tasks. We achieve a 39.2% absolute success rate improvement over the base policy and 11.6% improvement from training with the generated synthetic rollouts. Videos can be found at this anonymous website: https://sites.google.com/view/vla-w

Recent reinforcement learning methods for diffusion large language models (dLLMs) commonly rely on on-policy rollouts generated by the target dLLM itself. When successful on-policy rollouts are scarce, however, on-policy training may receive little positive reward and make only limited progress. To mitigate this problem, we explore incorporating higher-reward rollouts generated by a stronger external policy alongside on-policy rollouts from the target dLLM. However, directly incorporating these external rollouts introduces two practical challenges: differences in rollout length and instability when jointly processing rewards from on-policy and external rollouts. To address these challenges, we propose External Rollout Integration with Length Control and Source-Specific Processing (ERILS), which controls external-rollout length and processes the rewards of on-policy and external rollouts separately. Experiments on Sudoku, Countdown, and MATH500 under zero-shot evaluation show that ERILS improves multi-sample performance across all three tasks, with the largest gains on Sudoku. On Sudoku, ERILS achieves 98.4% best-of-4 completion accuracy, compared with 40.3% for the strongest baseline. ERILS also maintains approximately 90% deterministic single-completion accuracy on Sudoku across generation lengths of 128, 256, and 512 tokens. Our component analysis further shows that length-controlled external rollouts are more effective than uncontrolled external rollouts, and that source-specific reward processing avoids the training collapse observed with joint reward processing. These results show that rollout construction and reward processing are important design dimensions when integrating external rollouts into dLLM reinforcement learning.

Reinforcement learning with verifiable rewards (RLVR) via Group-Relative Policy Optimization (GRPO) is widely used for multi-turn VLM agent training, yet it suffers from zero-gradient silence on uniform failures and coarse episode-level credit assignment. While On-Policy Distillation (OPD) and On-Policy Self-Distillation (OPSD) mitigate sparse rewards using hindsight information, their underlying mechanisms remain poorly understood. Through controlled counterfactual rollback probes across five multi-turn VLM agent benchmarks, we reveal that performance gains in OPSD/OPD are largely driven by physical state rollback at the pivot step, defined as the first unrecoverable action without remaining step budget. However, physical state rollbacks are computationally prohibitive and infeasible in real-world environments. To bridge this gap, we present Pivot-Aware Internalized Visual On-Policy Training (PIVOT), an RL framework that internalizes pivot localization and state restoration directly into token-level parameter updates, eliminating environment rollbacks during RL training and additional skill hints at test time. PIVOT unifies three functional roles within a single architecture: a failure Analyzer non-invasively localizes the pivot step and diagnoses failure modes from visual trajectory collages and action logs; a detached Teacher re-scores failed tokens under this privileged diagnostic context; and a Student optimizes joint GRPO and confidence-gated OPD objectives. At test time, both Teacher and Analyzer branches are stripped. Evaluated on five multi-turn VLM agent tasks across cognitive grid puzzles, 3D embodied control and navigation, and generative reasoning, PIVOT achieves 0.90 overall accuracy on Qwen2.5-VL-3B (+8% over SFT+GRPO baseline and +5% over previous SOTA) and scales to 0.92 on Qwen3-VL-2B (+12% over SFT+GRPO baseline).

Multi-turn LLM agents are increasingly important for solving complex, interactive tasks, and reinforcement learning (RL) is a key ingredient for improving their long-horizon behavior. However, RL training requires generating large numbers of sandboxed rollout trajectories, and existing infrastructures often couple rollout orchestration with the training loop, making systems hard to migrate and maintain. Under the rollout-as-a-service philosophy, we present ProRL Agent , a scalable infrastructure that serves the full agentic rollout lifecycle through an API service. ProRL Agent also provides standardized and extensible sandbox environments that support diverse agentic tasks in rootless HPC settings. We validate ProRL Agent through RL training on software engineering, math, STEM, and coding tasks. ProRL Agent is open-sourced and integrated as part of NVIDIA NeMo Gym.

Reinforcement-Learning-based post-training has recently emerged as a promising paradigm for aligning text-to-image diffusion models with human preferences. In recent studies, increasing the rollout group size yields pronounced performance improvements, indicating substantial room for further alignment gains. However, scaling rollouts on large-scale foundational diffusion models (e.g., FLUX.1-12B) imposes a heavy computational burden. To alleviate this bottleneck, we explore the integration of FP4 quantization into Diffusion RL rollouts. Yet, we identify that naive quantized pipelines inherently introduce risks of performance degradation. To overcome this dilemma between efficiency and training integrity, we propose Sol-RL (Speed-of-light RL), a novel FP4-empowered Two-stage Reinforcement Learning framework. First, we utilize high-throughput NVFP4 rollouts to generate a massive candidate pool and extract a highly contrastive subset. Second, we regenerate these selected samples in BF16 precision and optimize the policy exclusively on them. By decoupling candidate exploration from policy optimization, Sol-RL integrates the algorithmic mechanisms of rollout scaling with the system-level throughput gains of NVFP4. This synergistic algorithm-hardware design effectively accelerates the rollout phase while reserving high-fidelity samples for optimization. We empirically demonstrate that our framework maintains the training integrity of BF16 precision pipeline while fully exploiting the throughput gains enabled by FP4 arithmetic. Extensive experiments across SANA, FLUX.1, and SD3.5-L substantiate that our approach delivers superior alignment performance across multiple metrics while accelerating training convergence by up to 4.64times, unlocking the power of massive rollout scaling at a fraction of the cost.

We present WebGym, the largest-to-date open-source environment for training realistic visual web agents. Real websites are non-stationary and diverse, making artificial or small-scale task sets insufficient for robust policy learning. WebGym contains nearly 300,000 tasks with rubric-based evaluations across diverse, real-world websites and difficulty levels. We train agents with a simple reinforcement learning (RL) recipe, which trains on the agent's own interaction traces (rollouts), using task rewards as feedback to guide learning. To enable scaling RL, we speed up sampling of trajectories in WebGym by developing a high-throughput asynchronous rollout system, designed specifically for web agents. Our system achieves a 4-5x rollout speedup compared to naive implementations. Second, we scale the task set breadth, depth, and size, which results in continued performance improvement. Fine-tuning a strong base vision-language model, Qwen-3-VL-8B-Instruct, on WebGym results in an improvement in success rate on an out-of-distribution test set from 26.2% to 42.9%, significantly outperforming agents based on proprietary models such as GPT-4o and GPT-5-Thinking that achieve 27.1% and 29.8%, respectively. This improvement is substantial because our test set consists only of tasks on websites never seen during training, unlike many other prior works on training visual web agents.

Mobile GUI agents are shifting from multi-module frameworks to native models trained end-to-end, yet industrial deployment faces three persistent gaps. Sandbox training produces a distribution mismatch with production environments; expensive real-device failures remain underutilized; and fixed benchmarks saturate, losing the power to guide iteration. We present BlueLM-GUI, a 35B-A3B mobile GUI agent built as a real-device-centric flywheel that closes these gaps through three principles. Every Sample Matters: a dual-track pipeline with Heterogeneous Triple-System Consensus evaluation and an Error Correction \& Derivation Module salvages every trajectory into usable supervision. Every Rollout Is Real: a three-stage recipe---continual pre-training, supervised fine-tuning, and agentic reinforcement learning on hundreds of real phones---grounds every rollout in real production environments, so the capability the model learns transfers directly to deployment. Every Query Evolves: a quota-driven benchmark methodology with three orthogonal axes enables precise attribution and allows the benchmark to be systematically upgraded as the model improves. BlueLM-GUI achieves 87.4 on MobileGUI-VBench, surpassing the best closed-source model by 5.1 points, and 84.9 on AndroidWorld, the best result among open-source models and competitive with closed-source models. These results demonstrate that grounding model training and iterative improvement in both real devices and the three Every principles yields strong, robust, and transferable mobile GUI capability.

Reinforcement learning (RL) has become a central post-training tool for improving the reasoning abilities of large language models (LLMs). In these systems, the rollout, the trajectory sampled from a prompt to termination, including intermediate reasoning steps and optional tool or environment interactions, determines the data the optimizer learns from, yet rollout design is often underreported. This survey provides an optimizer-agnostic view of rollout strategies for RL-based post-training of reasoning LLMs. We formalize rollout pipelines with unified notation and introduce Generate-Filter-Control-Replay (GFCR), a lifecycle taxonomy that decomposes rollout pipelines into four modular stages: Generate proposes candidate trajectories and topologies; Filter constructs intermediate signals via verifiers, judges, critics; Control allocates compute and makes continuation/branching/stopping decisions under budgets; and Replay retains and reuses artifacts across rollouts without weight updates, including self-evolving curricula that autonomously generate new training tasks. We complement GFCR with a criterion taxonomy of reliability, coverage, and cost sensitivity that characterizes rollout trade-offs. Using this framework, we synthesize methods spanning RL with verifiable rewards, process supervision, judge-based gating, guided and tree/segment rollouts, adaptive compute allocation, early-exit and partial rollouts, throughput optimization, and replay/recomposition for self-improvement. We ground the framework with case studies in math, code/SQL, multimodal reasoning, tool-using agents, and agentic skill benchmarks that evaluate skill induction, reuse, and cross-task transfer. Finally, we provide a diagnostic index that maps common rollout pathologies to GFCR modules and mitigation levers, alongside open challenges for building reproducible, compute-efficient, and trustworthy rollout pipelines.

Reinforcement learning (RL) has emerged as a standard post-training paradigm for shaping large language models (LLMs) into capable agents. In agentic RL, the rollout stage generates trajectories while invoking tools, producing long-tailed and non-stationary workloads that expose two fundamental challenges in resource management. First, due to the long-tail distribution, a small fraction of trajectories dominates rollout makespan. Second, rollout and training are subject to cross-stage imbalance, as they exhibit strong asymmetry in compute patterns, memory demands, and sensitivity to sequence length. Compounding this asymmetry, the sequence length distribution drifts continuously as the policy evolves, rendering any static resource split progressively suboptimal. We present Libra, a resource management system to address both challenges via two core mechanisms. The first is a global resource planner that jointly optimizes GPU allocation across rollout and training clusters. It leverages an elastic hybrid pool to enable lightweight, non-blocking worker reallocation between stages. The second is a causality-driven multi-level feedback queue (C-MLFQ) scheduler, which routes requests to heterogeneous rollout buckets based on causal signals derived from tool-return outcomes, rather than relying on fragile length predictions. Evaluated on 48 A800 GPUs, Libra achieves up to 3.0x higher throughput and converges up to 2.5x faster in reward compared to the baselines.

Synthesizing physics-grounded 3D assets is a critical bottleneck for interactive virtual worlds and embodied AI. Existing methods predominantly focus on static geometry, overlooking the functional properties essential for interaction. We propose that interactive asset generation must be rooted in functional logic and hierarchical physics. To bridge this gap, we introduce PhysForge, a decoupled two-stage framework supported by PhysDB, a large-scale dataset of 150,000 assets with four-tier physical annotations. First, a VLM acts as a "physical architect" to plan a "Hierarchical Physical Blueprint" defining material, functional, and kinematic constraints. Second, a physics-grounded diffusion model realizes this blueprint by synthesizing high-fidelity geometry alongside precise kinematic parameters via a novel KineVoxel Injection (KVI) mechanism. Experiments demonstrate that PhysForge produces functionally plausible, simulation-ready assets, providing a robust data engine for interactive 3D content and embodied agents.

Long-horizon agents must coordinate reasoning, tool use, and environment feedback over extended interactions. Learning from sparse outcome rewards requires weighting trajectories of different lengths and updating the policy while rollouts are still being collected. We examine a single-rollout asynchronous recipe combining Muon, token-averaged loss, truncated importance sampling, and auxiliary length and tool-error penalties. Single-rollout sampling allows asynchronous learning without waiting for multiple trajectories for the same issue. We study optimizer choices and recipe components for repository-level issue resolution across two model families. The evaluated training runs show higher training success with the full recipe than with the baselines.

Despite algorithm-level innovations for multi-agent reinforcement learning (MARL), the underlying networked infrastructure for large-scale MARL training remains underexplored. Existing training frameworks primarily optimize for single-agent scenarios and fail to address the unique system-level challenges of MARL, including rollout-training synchronization barriers, rollout load imbalance, and training resource underutilization. To bridge this gap, we propose FlexMARL, the first end-to-end training framework that holistically optimizes rollout, training, and their orchestration for large-scale LLM-based MARL. Specifically, FlexMARL introduces the joint orchestrator to manage data flow under the rollout-training disaggregated architecture. Building upon the experience store, a novel micro-batch driven asynchronous pipeline eliminates the synchronization barriers while providing strong consistency guarantees. Rollout engine adopts a parallel sampling scheme combined with hierarchical load balancing, which adapts to skewed inter/intra-agent request patterns. Training engine achieves on-demand hardware binding through agent-centric resource allocation. The training states of different agents are swapped via unified and location-agnostic communication. Empirical results on a large-scale production cluster demonstrate that FlexMARL achieves up to 7.3x speedup and improves hardware utilization by up to 5.6x compared to existing frameworks.