Daily Papers

Embodied Internet of Things (IoT) systems are promoting the adoption of task-oriented semantic communication (SemCom), in which the trustworthy task decisions require both semantic information reliability and source legitimacy. However, existing trustworthy designs in SemCom mainly focus on semantic content recovery and protection, with limited attention to source legitimacy. Motivated by this limitation, this paper establishes a new information exploitation paradigm for integrated SemCom-identity protection to address active source impersonation and passive identity inference by treating each SemCom signal as an inherent carrier of both task-relevant semantic information and transmitter physical identity information. We first examine these two information resources and then analyze their integration feasibility at the observation, processing, and decision levels. To exploit these resources for trustworthy decision making, we further develop a dual-branch identity protection mechanism under different operating modes. In the authentication mode, semantic recovery and physical-layer source verification are performed in parallel using the same received observation. In the concealment mode, identity exposure is suppressed while semantic recovery quality is maintained to support anonymous sensing reports. The resulting outputs are jointly interpreted to support task decisions under mode-specific identity protection requirements. Finally, two representative case studies on active source impersonation and passive identity inference are presented to evaluate the proposed framework.

The rapid evolution of wireless communication systems has created complex electromagnetic environments where multiple cellular standards (2G/3G/4G/5G) coexist, necessitating advanced signal source separation techniques. We present RFSS (RF Signal Source Separation), a comprehensive open-source dataset containing 52,847 realistic multi-standard RF signal samples with complete 3GPP standards compliance. Our framework generates authentic baseband signals for GSM, UMTS, LTE, and 5G NR with advanced channel modeling including multipath fading, MIMO processing up to 8 by 8 antennas, and realistic interference scenarios. Experimental validation demonstrates superior performance of CNN-LSTM architectures achieving 26.7 dB SINR improvement in source separation tasks, significantly outperforming traditional ICA (15.2 dB) and NMF (18.3 dB) approaches. The RFSS dataset enables reproducible research in RF source separation, cognitive radio, and machine learning applications while maintaining complete open-source accessibility

Intent-based network management automates 6G service lifecycles, but existing fulfilment and assurance approaches require traffic inspection, per-flow tracking, or vendor-internal telemetry. These requirements conflict with privacy constraints in multi-tenant networks and vendor opacity in O-RAN deployments. We present an architecture that provisions resources from declared intent categories without traffic inspection and verifies fulfilment using only cell-level standardised PM counters at the O1 interface. A data-processing inequality bounds resource-allocation leakage about traffic content by log_2 K bits for K categories. Intent-traffic unlinkability and node-opaque verification hold by construction. If verification requires at least q cells per category among M cells, the ceiling becomes log_2 lfloor M/q rfloor bits. This bound covers the category/resource channel, not total inference from PM counters. When individual records add state-independent noise to the category aggregate, the category-mean verifier is at least as powerful as any per-agent verifier. We map the architecture to the 3GPP intent lifecycle and O-RAN Non-RT RIC. On production PM data from four operator networks, the category-mean score has higher AUC on three networks and comparable AUC on the fourth under category-wide replacement, while per-cell screening suits sparse faults. These injection-based experiments do not establish the theorem's observation premise. Within-period cell co-movement limits a category mean to the evidence of 6 to 14 independent cells, and category-level verifiers need per-category calibration.

The coexistence of heterogeneous cellular standards (2G-5G) in shared spectrum demands sophisticated RF source separation techniques, yet no public dataset exists for data-driven research on this problem. We present RFSS (RF Signal Source Separation), an open-source dataset of 100,000 multi-source RF signal samples generated with full 3GPP standards compliance. The dataset covers GSM (TS 45.004), UMTS (TS 25.211), LTE (TS 36.211), and 5G NR (TS 38.211), with 2-4 simultaneous sources per sample plus 4,000 single-source reference samples, at 30.72 MHz sample rate. Each sample passes through independent 3GPP TDL multipath fading channels and realistic hardware impairments: carrier frequency offset, I/Q imbalance, phase noise, DC offset, and PA nonlinearity (Rapp model). Two mixing modes are provided: co-channel (all sources at baseband) and adjacent-channel (each source frequency-shifted to its standard-specific carrier). The dataset totals 103 GB in HDF5 format with a 70/15/15 train/validation/test split. We benchmark five methods: FastICA, Frobenius-norm NMF, Conv-TasNet, DPRNN, and a CNN-LSTM baseline, evaluated using permutation-invariant SI-SINR (PI-SI-SINR). Conv-TasNet achieves -21.18 dB PI-SI-SINR on 2-source mixtures versus -34.91 dB for ICA, a 13.7 dB improvement. On co-channel mixtures, Conv-TasNet reaches -12.34 dB versus -28.04 dB for ICA and -16.19 dB for NMF. The dataset and evaluation code are publicly released at submission time.

Deep joint source-channel coding (DeepJSCC) transmits data end-to-end over wireless channels using a neural encoder-decoder, but reconstruction quality can degrade sharply under adversarial perturbations and channel disturbances; no method formally bounds this degradation for DeepJSCC. We present the first bound-propagation framework for verifying DeepJSCC's decoder, bounding worst-case reconstruction error over a given wireless channel's noise region. Current deep neural network (DNN) verifiers do not support three DeepJSCC decoder components: parametric rectified linear activations (PReLU), transposed convolutions, and Rayleigh fading. We extend state-of-the-art techniques for optimization of linear relaxation in DNN verification for PReLU, replace the transposed convolution with its restricted upsample-then-convolution form, and formulate Rayleigh fading as a structural perturbation prepended directly into the decoder, thereby reducing the dimensionality of the verification problem. We also instantiate Lipschitz-regularized global robustness training, denoted GloRo, improving global robustness and enabling tight certification of DeepJSCC models for the first time. On DeepJSCC model for image transmission, this global robustness training procedure combined with structural encoding lowers the median certified bound by up to 41% and certifies about ten times more safe cases (192 against 19) than GloRo with interval encoding at a 10-degree error in channel estimation. Over-the-air validation with an orthogonal frequency-division multiplexing (OFDM) implementation on software-defined radio devices confirm the certificate holds on real hardware, with a worst observed error on radio link at 0.082 against a certified bound of 0.128.

Diagnosing 802.11 packet captures requires expert protocol knowledge, is slow, inconsistent across engineers, and unscalable. LLM-based approaches sound plausible but fabricate protocol events absent from captures (especially truncated traces), produce uncalibrated confidence scores, and suffer evaluation bias when golden references are co-produced by the model under test. We introduce PROBE (Protocol Reasoning Over evidence-Based Ensembles), a multi-stage pipeline addressing all three failures. It integrates (i) deterministic PCAP-to-text normalization with frame-level verifiability, (ii) multi-run, multi-candidate ensembles with optional cross-model second opinion and progressive obfuscation, (iii) a verdict-aware evidence framework treating absence of failure evidence as contributing evidence, and (iv) a fully deterministic composite reliability score from evidence validity, run-to-run stability, and cross-model agreement without LLM self-assessment. On 87 enterprise Wi-Fi captures (104 capture-reviewer pairs), single-pass LLM analysis raises weighted evidence F1 from 0.871 (expert baseline) to 0.912 but misses critical frames in 35% of cases. Naive ensemble voting drops below baseline (0.842) as majority voting amplifies conservative verdicts: 50% of confirmed failures are misclassified as 'no issue' or 'insufficient evidence.' Adding evidence-grounded reconciliation achieves 0.957 F1, a 96% auto-accept rate, and a worst-case floor above 0.70. LLM self-reported confidence clusters at 0.95 regardless of difficulty (71% report exactly 0.95), confirming it is uninformative. We also introduce a model-agnostic evaluation framework using per-field assertion matching, eliminating circular bias from model-co-produced golden references.

Process attestation systems verify that a continuous physical process, such as human authorship, actually occurred, rather than merely checking system state. These systems face a fundamental dependability challenge: the evidence collection infrastructure must remain available and tamper-resistant even when the attesting party controls the platform. Trusted Execution Environments (TEEs) provide hardware-enforced isolation that can address this challenge, but their integration with continuous process attestation introduces novel resilience requirements not addressed by existing frameworks. We present the first architecture for continuous process attestation evidence collection inside TEEs, providing hardware-backed tamper resistance against trust-inverted adversaries with graduated input assurance from software-channel integrity (Tier 1) through hardware-bound input (Tier 3). We develop a Markov-chain dependability model quantifying Evidence Chain Availability (ECA), Mean Time Between Evidence Gaps (MTBEG), and Recovery Time Objectives (RTO). We introduce a resilient evidence chain protocol maintaining chain integrity across TEE crashes, network partitions, and enclave migration. Our security analysis derives formal bounds under combined threat models including trust inversion and TEE side channels, parameterized by a conjectural side-channel leakage bound esc that requires empirical validation. Evaluation on Intel SGX demonstrates under 25% per-checkpoint CPU overhead (<0.3% of the 30 s checkpoint interval), >99.5% Evidence Chain Availability (ECA) (the fraction of session time with active evidence collection) in Monte Carlo simulation under Poisson failure models, and sealed-state recovery under 200 ms.

This paper explores the use of generative models to synthesize high-quality, site-specific multiple-input multiple-output (MIMO) channel data, addressing the high cost of the extensive measurement campaigns required to acquire real-world data for AI-native wireless networks. Two location-conditioned generative paradigms are compared: a conditional denoising diffusion implicit model (cDDIM), and a conditional flow matching model (cFMM). Both these models generate MIMO channel matrices conditioned on user coordinates, to preserve the spatial structure of the deployment site. The approaches are evaluated across three dimensions: statistical fidelity (including beam consistency and effective rank), generation efficiency, and utility in downstream tasks such as channel-state information compression and beam alignment. Results across diverse propagation scenarios (28 GHz and 3.5 GHz, both line-of-sight and non-line-of-sight) demonstrate that both models accurately capture site-specific characteristics, even when trained on scarce ground-truth data. Notably, cFMM achieves a quality comparable to cDDIM with roughly an order of magnitude less inference time. Augmenting scarce site-specific datasets with these synthetic channels yields hefty performance gains in downstream physical layer tasks compared to using scarce data alone or stochastic channels.

Understanding the wireless spectrum is a fundamen- tal requirement for intelligent communication systems, however, interpreting spectrograms requires extracting multiple physical attributes and reasoning about signal structure, which is a capability that is not achieved by traditional ML approaches. Recent advances in vision-language models (VLMs) demonstrated the possibility of learning such interpretation capabilities directly from data. This paper investigates whether VLMs can learn this capability from synthetic data alone, and more importantly, whether such learned representations generalize to real over-the- air RF environments. To address this question, we introduce RF-Analyzer, an SDR-to-AI analysis platform that integrates live spectrum captures associated with the corresponding VLM- based interpretation, enabling direct evaluation of VLMs outputs on live over-the-air signals. Using this platform, we assess a model trained exclusively on synthetic spectrogram data with general-purpose baselines. To enable systematic analysis, we establish a benchmark framework comprising three metrics, Physical Attribute Extraction Score (PAES), Prompt Leakage Rate (PLR), and hallucination count, to assess signal understanding and grounding. The obtained results demonstrate that VLMs trained on synthetic spectrogram data can generalize to real RF environments, particularly for extracting physical signal attributes such as spectral occupancy, temporal behavior, and SNR. This indicates that synthetic data is sufficient for learning transferable representations of RF signal structure. However, this generalization is limited due to the fact that synthetic training does not provide reliable semantic grounding without contextual priors. In particular, generalization breaks under conditions that are not covered in the synthetic distribution, particularly low-SNR regimes

Cellular networks are critical infrastructure supporting billions of worldwide users and safety- and mission-critical services. Vulnerabilities in cellular networks can therefore cause service disruption, privacy breaches, and broad societal harm, motivating growing efforts to analyze 3GPP specifications that define required device and operator behavior. While large language models (LLMs) have demonstrated the capability for reading technical documents, cellular specifications impose unique challenges: faithful interpretation of normative language, reasoning across cross-referenced clauses, and verifiable conclusions grounded in multimodal evidence such as tables and figures. To address these challenges, we propose CellSpecSec-ARI, a unified Adapt-Retrieve-Integrate framework for systematic understanding and standard-driven security analysis of 3GPP specifications; CellularSpecSec-Bench, a staged benchmark, containing newly constructed high-quality datasets with expert-verified and corrected subsets from prior open-source resources. Together, they establish an accessible and reproducible foundation for quantifying progress in specification understanding and security reasoning in the cellular network security domain.

The expansion of the low-altitude economy has underscored the significance of Low-Altitude Network Coverage (LANC) prediction for designing aerial corridors. While accurate LANC forecasting hinges on the antenna beam patterns of Base Stations (BSs), these patterns are typically proprietary and not readily accessible. Operational parameters of BSs, which inherently contain beam information, offer an opportunity for data-driven low-altitude coverage prediction. However, collecting extensive low-altitude road test data is cost-prohibitive, often yielding only sparse samples per BS. This scarcity results in two primary challenges: imbalanced feature sampling due to limited variability in high-dimensional operational parameters against the backdrop of substantial changes in low-dimensional sampling locations, and diminished generalizability stemming from insufficient data samples. To overcome these obstacles, we introduce a dual strategy comprising expert knowledge-based feature compression and disentangled representation learning. The former reduces feature space complexity by leveraging communications expertise, while the latter enhances model generalizability through the integration of propagation models and distinct subnetworks that capture and aggregate the semantic representations of latent features. Experimental evaluation confirms the efficacy of our framework, yielding a 7% reduction in error compared to the best baseline algorithm. Real-network validations further attest to its reliability, achieving practical prediction accuracy with MAE errors at the 5dB level.

SiFo, a wireless foundation model-based framework, is proposed for low-overhead site-specific channel state information (CSI) feedback. In 3GPP NR, Type-II feedback provides an expressive codebook-based CSI representation, but it requires substantial reference-signal overhead, UE-side search, and feedback. Learning-based site-specific feedback can reduce these online costs while retaining high-quality subspace representation by exploiting deployment-dependent propagation structure. However, existing site-specific designs typically train a dedicated neural network for each new site, which limits scalability when the number of deployments is large. SiFo addresses this scalability issue by pretraining a CSI feedback model across source sites and adapting it to a target site through lightweight calibration. A small set of target-site users reports low-dimensional reference signal received power (RSRP) fingerprints, and their full-CSI-based subspace labels are stored as calibration memory. During online operation, a served user is matched to calibrated users through the same SSB probing and RSRP reporting procedure, so nearby calibration samples provide site-specific subspace guidance without updating model parameters. SiFo therefore transfers common propagation knowledge while retaining local adaptation. Numerical results across ten city scenarios demonstrate that SiFo (i) achieves higher CSI-capture efficiency than separately trained site-specific learning baselines under the same target-site labeled budget, (ii) approaches the high-overhead 3GPP NR Type-II feedback reference using only RSRP measurements collected during online SSB probing, and (iii) converts the high CSI-capture efficiency and low overhead into effective spectral efficiency improvement under limited target-site data.

As demand for LLM inference grows, it is becoming increasingly important that providers and their customers can verify that inference processes are performed correctly, without errors or tampering. However, re-running the same inference process twice often leads to different results due to benign numerical noise, making it difficult to distinguish legitimate variation from actual problems. To address this problem, we introduce Token-DiFR (Token-Divergence-From-Reference), a method for verifying inference outputs by comparing generated tokens against predictions made by a trusted reference implementation conditioned on the same random seed. Sampling seed synchronization tightly constrains valid outputs, leaving providers minimal room to deviate from correct inference, which allows output tokens themselves to serve as auditable evidence of correctness at zero additional cost to the provider. Token-DiFR reliably identifies sampling errors, simulated bugs, and model quantization, detecting 4-bit quantization with AUC > 0.999 within 300 output tokens. For applications requiring sample-efficient forward-pass verification, we additionally introduce Activation-DiFR, a scheme that uses random orthogonal projections to compress activations into compact fingerprints for subsequent verification. Activation-DiFR detects 4-bit quantization with AUC > 0.999 using just 2 output tokens, while reducing communication overhead by 25-75% relative to existing methods. We release an open-source integration with vLLM to accelerate practical deployment of verifiable inference.

This paper presents a groundbreaking self-improving interference management framework tailored for wireless communications, integrating deep learning with uncertainty quantification to enhance overall system performance. Our approach addresses the computational challenges inherent in traditional optimization-based algorithms by harnessing deep learning models to predict optimal interference management solutions. A significant breakthrough of our framework is its acknowledgment of the limitations inherent in data-driven models, particularly in scenarios not adequately represented by the training dataset. To overcome these challenges, we propose a method for uncertainty quantification, accompanied by a qualifying criterion, to assess the trustworthiness of model predictions. This framework strategically alternates between model-generated solutions and traditional algorithms, guided by a criterion that assesses the prediction credibility based on quantified uncertainties. Experimental results validate the framework's efficacy, demonstrating its superiority over traditional deep learning models, notably in scenarios underrepresented in the training dataset. This work marks a pioneering endeavor in harnessing self-improving deep learning for interference management, through the lens of uncertainty quantification.

Speech deepfake source verification systems aims to determine whether two synthetic speech utterances originate from the same source generator, often assuming that the resulting source embeddings are independent of speaker traits. However, this assumption remains unverified. In this paper, we first investigate the impact of speaker factors on source verification. We propose a speaker-disentangled metric learning (SDML) framework incorporating two novel loss functions. The first leverages Chebyshev polynomial to mitigate gradient instability during disentanglement optimization. The second projects source and speaker embeddings into hyperbolic space, leveraging Riemannian metric distances to reduce speaker information and learn more discriminative source features. Experimental results on MLAAD benchmark, evaluated under four newly proposed protocols designed for source-speaker disentanglement scenarios, demonstrate the effectiveness of SDML framework. The code, evaluation protocols and demo website are available at https://github.com/xxuan-acoustics/RiemannSD-Net.

Recently, researchers have shown that the beamforming feedback angles (BFAs) used for Wi-Fi multiple-input multiple-output (MIMO) operations can be effectively leveraged as a proxy of the channel frequency response (CFR) for different purposes. Examples are passive human activity recognition and device fingerprinting. However, even though the BFAs report frames are sent in clear text, there is not yet a unified open-source tool to extract and decode the BFAs from the frames. To fill this gap, we developed Wi-BFI, the first tool that allows retrieving Wi-Fi BFAs and reconstructing the beamforming feedback information (BFI) - a compressed representation of the CFR - from the BFAs frames captured over the air. The tool supports BFAs extraction within both IEEE 802.11ac and 802.11ax networks operating on radio channels with 160/80/40/20 MHz bandwidth. Both multi-user and single-user MIMO feedback can be decoded through Wi-BFI. The tool supports real-time and offline extraction and storage of BFAs and BFI. The real-time mode also includes a visual representation of the channel state that continuously updates based on the collected data. Wi-BFI code is open source and the tool is also available as a pip package.

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat, as they compromise the robustness of accurate positioning. The detection of anomalies within frequency snapshots is crucial to counteract these interferences effectively. A critical preliminary countermeasure involves the reliable classification of interferences and the characterization and localization of jamming devices. This paper introduces an extensive dataset comprising snapshots obtained from a low-frequency antenna that capture various generated interferences within a large-scale environment, including controlled multipath effects. Our objective is to assess the resilience of machine learning (ML) models against environmental changes, such as multipath effects, variations in interference attributes, such as interference class, bandwidth, and signal power, the accuracy of jamming device localization, and the constraints imposed by snapshot input lengths. Furthermore, we evaluate the performance of a diverse set of 129 distinct vision encoder models across all tasks. By analyzing the aleatoric and epistemic uncertainties, we demonstrate the adaptability of our model in generalizing across diverse facets, thus establishing its suitability for real-world applications. Dataset: https://gitlab.cc-asp.fraunhofer.de/darcy_gnss/controlled_low_frequency

In the rapidly evolving landscape of 5G technology, the adoption of cloud-based infrastructure for the deployment of 5G services has become increasingly common. Using a service-based architecture, critical 5G components, such as the Access and Mobility Management Function (AMF), Session Management Function (SMF), and User Plane Function (UPF), now run as containerized pods on Kubernetes clusters. Although this approach improves scalability, flexibility, and resilience, it also introduces new security challenges, particularly to ensure the integrity and trustworthiness of these components. Current 5G security specifications (for example, 3GPP TS 33.501) focus on communication security and assume that network functions remain trustworthy after authentication, consequently lacking mechanisms to continuously validate the integrity of NVFs at runtime. To close this gap, and to align with Zero Trust principles of 'never trust, always verify', we present a TPM 2.0-based continuous remote attestation solution for core 5G components deployed on Kubernetes. Our approach uses the Linux Integrity Measurement Architecture (IMA) and a Trusted Platform Module (TPM) to provide hardware-based runtime validation. We integrate the open-source Keylime framework with a custom IMA template that isolates pod-level measurements, allowing per-pod integrity verification. A prototype on a k3s cluster (consisting of 1 master, 2 worker nodes) was implemented to attest to core functions, including AMF, SMF and UPF. The experimental results show that the system detects unauthorized modifications in real time, labels each pod's trust state, and generates detailed audit logs. This work provides hardware-based continuous attestation for cloud native and edge deployments, strengthening the resilience of 5G as critical infrastructure in multi-vendor and mission-critical scenarios of 5G.

Retrieval-augmented generation (RAG) is increasingly deployed in enterprise search and document-centric assistants, where responses must be grounded in long and complex source materials. In practice, verifying that generated answers faithfully reflect retrieved documents is difficult: large language models can check long contexts but are too slow and costly for interactive services, while lightweight classifiers operate within strict context limits and frequently miss evidence outside truncated passages. We present the design of a real-time verification component integrated into a production RAG pipeline that enables full-document grounding under latency constraints. The system processes documents up to 32K tokens and employs adaptive inference strategies to balance response time and verification coverage across workloads. We describe the architectural decisions, operational trade-offs, and evaluation methodology used to deploy the verifier, and show that full-context verification substantially improves detection of unsupported responses compared with truncated validation. Our experience highlights when long-context verification is necessary, why chunk-based checking often fails in real documents, and how latency budgets shape model design. These findings provide practical guidance for practitioners building reliable large-scale retrieval-augmented applications. (Model, benchmark, and code: https://huggingface.co/llm-semantic-router)

Mixture-of-Experts (MoE) language models produce routing information during inference that may be logged or exposed for monitoring, debugging, load analysis, and safety auditing. Unlike ordinary model outputs, this telemetry reveals a view of the model's internal computation, raising a privacy question: can it reveal whether an example was used to fine-tune the deployed model? We introduce a router-augmented membership inference attack that combines conventional output-side signals with aggregated routing features and applies a membership classifier learned from independently fine-tuned shadow models to the target model. Across three MoE architectures and three data domains, router telemetry consistently improves membership inference over a strong output-signal ensemble, increasing TPR at 1\% FPR by 2.7--9.4 percentage points across all nine settings. The leakage persists across full fine-tuning, frozen-router training, LoRA, and instruction tuning, and remains observable with only discrete expert selections, restricted telemetry, or a single shadow model. Mechanistic analysis further shows that the leakage does not require router-specific memorization: fine-tuning introduces membership information into hidden representations, while the router exposes a projection of this signal even when its parameters are frozen. Perturbing the telemetry reduces this additional leakage only as its fidelity degrades. Our results show that router telemetry can turn an operational signal into an additional privacy surface for fine-tuned MoE models.

The automatic classification of applications and services is an invaluable feature for new generation mobile networks. Here, we propose and validate algorithms to perform this task, at runtime, from the raw physical channel of an operative mobile network, without having to decode and/or decrypt the transmitted flows. Towards this, we decode Downlink Control Information (DCI) messages carried within the LTE Physical Downlink Control CHannel (PDCCH). DCI messages are sent by the radio cell in clear text and, in this paper, are utilized to classify the applications and services executed at the connected mobile terminals. Two datasets are collected through a large measurement campaign: one labeled, used to train the classification algorithms, and one unlabeled, collected from four radio cells in the metropolitan area of Barcelona, in Spain. Among other approaches, our Convolutional Neural Network (CNN) classifier provides the highest classification accuracy of 99%. The CNN classifier is then augmented with the capability of rejecting sessions whose patterns do not conform to those learned during the training phase, and is subsequently utilized to attain a fine grained decomposition of the traffic for the four monitored radio cells, in an online and unsupervised fashion.

The introduction of fifth-generation (5G) radio technology has revolutionized communications, bringing unprecedented automation, capacity, connectivity, and ultra-fast, reliable communications. However, this technological leap comes with a substantial increase in energy consumption, presenting a significant challenge. To improve the energy efficiency of 5G networks, it is imperative to develop sophisticated models that accurately reflect the influence of base station (BS) attributes and operational conditions on energy usage.Importantly, addressing the complexity and interdependencies of these diverse features is particularly challenging, both in terms of data processing and model architecture design. This paper proposes a novel 5G base stations energy consumption modelling method by learning from a real-world dataset used in the ITU 5G Base Station Energy Consumption Modelling Challenge in which our model ranked second. Unlike existing methods that omit the Base Station Identifier (BSID) information and thus fail to capture the unique energy fingerprint in different base stations, we incorporate the BSID into the input features and encoding it with an embedding layer for precise representation. Additionally, we introduce a novel masked training method alongside an attention mechanism to further boost the model's generalization capabilities and accuracy. After evaluation, our method demonstrates significant improvements over existing models, reducing Mean Absolute Percentage Error (MAPE) from 12.75% to 4.98%, leading to a performance gain of more than 60%.

The proliferation of generative AI poses challenges for information integrity assurance, requiring systems that connect model governance with end-user verification. We present Origin Lens, a privacy-first mobile framework that targets visual disinformation through a layered verification architecture. Unlike server-side detection systems, Origin Lens performs cryptographic image provenance verification and AI detection locally on the device via a Rust/Flutter hybrid architecture. Our system integrates multiple signals - including cryptographic provenance, generative model fingerprints, and optional retrieval-augmented verification - to provide users with graded confidence indicators at the point of consumption. We discuss the framework's alignment with regulatory requirements (EU AI Act, DSA) and its role in verification infrastructure that complements platform-level mechanisms.

The classification of fifth-generation New-Radio (5G-NR) mobile network traffic is an emerging topic in the field of telecommunications. It can be utilized for quality of service (QoS) management and dynamic resource allocation. However, traditional approaches such as Deep Packet Inspection (DPI) can not be directly applied to encrypted data flows. Therefore, new real-time encrypted traffic classification algorithms need to be investigated to handle dynamic transmission. In this study, we examine the real-time encrypted 5G Non-Standalone (NSA) application-level traffic classification using physical channel records. Due to the vastness of their features, decision-tree-based gradient boosting algorithms are a viable approach for classification. We generate a noise-limited 5G NSA trace dataset with traffic from multiple applications. We develop a new pipeline to convert sequences of physical channel records into numerical vectors. A set of machine learning models are tested, and we propose our solution based on Light Gradient Boosting Machine (LGBM) due to its advantages in fast parallel training and low computational burden in practical scenarios. Our experiments demonstrate that our algorithm can achieve 95% accuracy on the classification task with a state-of-the-art response time as quick as 10ms.

AI compute verification is one of the first tangible and tractable points for international policy aimed at AI governance. Determining whether frontier labs, or any operator, comply with agreements requires the regulating authority to discern how their compute is used. The elementary building block of AI compute is the GPU, and any activity it executes leaves a physical trace. Here, we show that an external observer can identify the class of the workload running on an NVIDIA H200 from its power draw. Unlike on-chip NVML telemetry, which can be spoofed or replayed, such a physical channel can in principle be observed independently of operator cooperation. We recorded 930 five-second traces at sim 10 MHz, covering seventeen open LLM families and twenty-five non-AI workloads. Over this corpus we separate training from inference and from non-AI computation with an accuracy of 97% and a macro-averaged F1 score of 0.955, evaluated on model families unseen during training. AI workload spectral content predominantly lies below sim 20kHz and training is particularly recognizable through the memory-bound optimizer update. The GPU operator is then treated as adversarial and able to reshape the physical computation itself. Four evasion strategies are tested to disguise training as inference, producing an additional 680 adversarial traces. A detector hardened against evasion strategies, with the tested strategy held out, catches training geq 99% of the time for three of the four strategies. The fourth, diluted low-rank adaptation (LoRA), is detected 48--88% of the time with a hardened classifier, rising to geq 98% with an additional rescue rule. While these attacks are not a comprehensive evaluation against adversarial behaviour, they offer initial insights beyond genuine activities and a dataset for developing and testing stronger evasion mechanisms.

Large language models (LLMs) have made misinformation inexpensive to produce but not to verify, creating a growing asymmetry in the information ecosystem. Under tight time, labor, and budget constraints, media organizations, platforms, and fact-checkers rely on screening to prioritize which content to verify. We introduce VEX-Bench, a unified benchmark for evaluating the verification complexity of LLM-generated misinformation, as perceived during screening, across models and generation methods. Verification complexity is assessed along multiple dimensions derived from journalistic and fact-checking practices, capturing checkability, harm potential, source credibility signals, imposter legitimacy, and expected verification effort. We define the VEX score as an integrated measure combining elicitation yield and verification complexity to quantify how generated content consumes limited verification capacity. We construct a benchmark spanning two misinformation categories, 6 high-stakes domains, and 60 real-world topics, and evaluate 7 frontier LLMs and 7 generation methods, yielding 5{,}880 articles. We employ an LLM-as-judge for scalable evaluation and validate it using content-analysis methodology, including ordinal Krippendorff α for inter-annotator reliability, complemented by fact-checking agents for verification. Our findings show that no single method dominates all dimensions, underscoring the need for multi-dimensional evaluation. LLMs can generate high-VEX misinformation at 3times to 169times lower cost than agent-based verification. Such content is often prioritized during screening, consuming scarce verification resources and introducing a systematic risk of misallocation in resource-constrained verification systems. The code is publicly available in our https://github.com/HanxunH/VEX-Bench{GitHub repository}.

The growth of IoT devices in shared environments has outpaced our ability to identify them, posing urgent risks to privacy, safety, and accountability. This challenge is especially pronounced in open-world environments, where network traffic metadata is often sparse, noisy, or adversarial. To address this problem, we introduce a semantic inference pipeline that reframes device identification as a language modeling task over real-world network metadata. As this approach depends on reliable supervision, we first construct high-fidelity vendor labels for the IoT Inspector dataset, the largest real-world corpus of its kind, using an ensemble of large language models guided by mutual-information and entropy-based stability scores. We then instruction-tune a quantized LLaMA 3.1 8B model on this dataset using curriculum learning to support generalization under sparsity and long-tail vendor distributions. Our model achieves 98.69% top-1 and 90.73% macro accuracy across 2,015 vendors, while remaining robust to missing fields, protocol drift, and adversarial manipulation. We also evaluate the model on an independent IoT testbed dataset, assess explanation quality, and conduct adversarial tests to probe robustness under spoofed and obfuscated input. These results position instruction-tuned LLMs as a scalable, interpretable foundation for trustworthy device identification at scale.

Wireless sensing approaches promise to transform smart infrastructures into privacy-preserving motion detectors, yet commercial adoption remains limited. A common assumption may explain this gap: that denser sensor deployments yield better accuracy. We tested this assumption with a 12-day naturalistic study using a 9-node ESP32-C3 mesh (72 sensing links) in a residential environment. Our results show that a single well-placed link outperformed the full 72-link mesh (AUC 0.541 vs. 0.489, Cohen's d=0.86). Even a random link selection matched optimized selection (p=0.35). The benefit comes from avoiding multi-link fusion, not from choosing the right link. We attribute this to a "dilution effect": links whose Fresnel zones miss activity regions contribute noise that overwhelms signal from informative links. In our deployment, strategic link placement mattered 2.7times more than classifier choice. We release 312 hours of labeled CSI data, firmware, and analysis code to enable validation across diverse environments.

IoT (Internet of Things) refers to the network of interconnected physical devices, vehicles, home appliances, and other items embedded with sensors, software, and connectivity, enabling them to collect and exchange data. IoT Forensics is collecting and analyzing digital evidence from IoT devices to investigate cybercrimes, security breaches, and other malicious activities that may have taken place on these connected devices. In particular, EM-SCA has become an essential tool for IoT forensics due to its ability to reveal confidential information about the internal workings of IoT devices without interfering these devices or wiretapping their networks. However, the accuracy and reliability of EM-SCA results can be limited by device variability, environmental factors, and data collection and processing methods. Besides, there is very few research on these limitations that affects significantly the accuracy of EM-SCA approaches for the crossed-IoT device portability as well as limited research on the possible solutions to address such challenge. Therefore, this empirical study examines the impact of device variability on the accuracy and reliability of EM-SCA approaches, in particular machine-learning (ML) based approaches for EM-SCA. We firstly presents the background, basic concepts and techniques used to evaluate the limitations of current EM-SCA approaches and datasets. Our study then addresses one of the most important limitation, which is caused by the multi-core architecture of the processors (SoC). We present an approach to collect the EM-SCA datasets and demonstrate the feasibility of using transfer learning to obtain more meaningful and reliable results from EM-SCA in IoT forensics of crossed-IoT devices. Our study moreover contributes a new dataset for using deep learning models in analysing Electromagnetic Side-Channel data with regards to the cross-device portability matter.

Speech language models (speech LLMs) can generate plausible outputs from audio that contains no usable speech evidence. We study this failure as a pre-generation support-estimation problem and present SURE-Voice, a training-free front end that decides whether an audio prompt contains intelligible speech evidence before calling a speech LLM. We build SURE-Challenge with a 640-example SURE-Core split and a 1,920-example SURE-Extended split derived from 120 LibriSpeech source utterances. Using one fixed operating point, an energy screen plus Whisper token confidence raises unsupported accuracy on the held-out Extended test from 0.000--0.133 to 0.919 for six non-degenerate speech LLM backbones, while supported accuracy remains 0.919--0.970 and downstream calls fall from 480 to 287. A 500-clip ESC-50 sanity set shows the same pattern on real environmental audio, with vocal non-speech as a residual failure mode. An overlap diagnostic shows that source attribution remains separate from speech-evidence filtering. The evidence supports a controlled benchmark baseline and a deployment-oriented analysis; it does not establish universal robustness to semantic answerability, gain variation or natural conversations.

Radio Frequency Fingerprinting Identification (RFFI) is a lightweight physical layer identity authentication technique. It identifies the radio-frequency device by analyzing the signal feature differences caused by the inevitable minor hardware impairments. However, existing RFFI methods based on closed-set recognition struggle to detect unknown unauthorized devices in open environments. Moreover, the feature interference among legitimate devices can further compromise identification accuracy. In this paper, we propose a joint radio frequency fingerprint prediction and siamese comparison (JRFFP-SC) framework for open set recognition. Specifically, we first employ a radio frequency fingerprint prediction network to predict the most probable category result. Then a detailed comparison among the test sample's features with registered samples is performed in a siamese network. The proposed JRFFP-SC framework eliminates inter-class interference and effectively addresses the challenges associated with open set identification. The simulation results show that our proposed JRFFP-SC framework can achieve excellent rogue device detection and generalization capability for classifying devices.

Verification of an identity based on the human face radar signature in mmwave is studied. The chipset for 802.11ad/y networking that is cable of operating in a radar mode is used. A dataset with faces of 200 different persons was collected for the testing. Our preliminary study shows promising results for the application of autoencoder for the setup at hand.

This paper addresses the remote verification of the authenticity of Optically Variable Devices (commonly known as holograms) on identity documents. Typically placed over the cardholder's photo, these devices provide strong and easily verifiable security for human inspection but pose challenges for automated verification. Existing approaches easily cover static frauds (e.g. paper photocopy) and can be evaluated for such, but their capacity to detect real, dynamic fraud cases (e.g. handcrafted hologram) has not been evaluated to date because of the lack of public datasets. Furthermore, they are usually trained to detect known attack types, and few of them can generalize to new, unseen attacks. This work features three contributions to address these limitations: 1) a new public dataset, MIDV-DynAttack, which extends the existing MIDV-Holo dataset with realistic, static and dynamic attacks against identity document specimens, tripling the number of attack samples compared to the original dataset, 2) a novel verification method which can assess the authenticity of a specific hologram thanks to the analysis of its dynamic behavior and appearance, can be trained without dynamic attack samples, and exhibits new state-of-the-art performance, 3) a benchmark of existing approaches which follows a clear evaluation protocol and emphasizes the inability of other approaches to deal with dynamic attacks, as well as new challenging attacks to deal with. Code and dataset are publicly available at https://github.com/EPITAResearchLab/pouliquen.25.icdar.

The widespread adoption of deep neural networks (DNNs) requires efficient techniques for verifying their safety. DNN verifiers are complex tools, which might contain bugs that could compromise their soundness and undermine the reliability of the verification process. This concern can be mitigated using proofs: artifacts that are checkable by an external and reliable proof checker, and which attest to the correctness of the verification process. However, such proofs tend to be extremely large, limiting their use in many scenarios. In this work, we address this problem by minimizing proofs of unsatisfiability produced by DNN verifiers. We present algorithms that remove facts which were learned during the verification process, but which are unnecessary for the proof itself. Conceptually, our method analyzes the dependencies among facts used to deduce UNSAT, and removes facts that did not contribute. We then further minimize the proof by eliminating remaining unnecessary dependencies, using two alternative procedures. We implemented our algorithms on top of a proof producing DNN verifier, and evaluated them across several benchmarks. Our results show that our best-performing algorithm reduces proof size by 37%-82% and proof checking time by 30%-88%, while introducing a runtime overhead of 7%-20% to the verification process itself.

Electromagnetic (EM) side-channel analysis traditionally assumes a stationary, close-proximity probe - a threat model that underestimates aerial adversaries. TriSweep is a simulation framework that designs and evaluates a four-drone swarm architecture for autonomous standoff EM-SCA of embedded microcontrollers at 0.25-1.5 m. Three spatially specialized collector drones - Anchor (full-spectrum), Mask Probe (mask-register loading leakage), and Cipher Probe (masked SubBytes output leakage) - feed a stationary Accumulator drone that performs coherent combining (+4.8 dB SNR gain) and second-order mask cancellation via a centered product of the two spatially separated leakage streams. Evaluated against three real ANSSI ASCAD datasets (ATmega8515 masked AES-128 and 50/100-sample desynchronized variants), the framework achieves a simulated key rank of 18 +/- 1.7 (five-seed) at 0.25 m on the primary masked dataset. Profiling-trace cross-correlation alignment reduces single-drone rank from 89 to 21 on the 100-sample-jitter variant, demonstrating compensation for drone hover vibration. A two-channel CNN in the Accumulator converges to a loss of 0.454 (vs. random baseline 5.545) and improves rank on desynchronized datasets. No physical hardware has been fabricated; prototype construction is the planned next step.

The risks of frontier AI may require international cooperation, which in turn may require verification: checking that all parties follow agreed-on rules. For instance, states might need to verify that powerful AI models are widely deployed only after their risks to international security have been evaluated and deemed manageable. However, research on AI verification could benefit from greater clarity and detail. To address this, this report provides an in-depth overview of AI verification, intended for both policy professionals and technical researchers. We present novel conceptual frameworks, detailed implementation options, and key R&D challenges. These draw on existing literature, expert interviews, and original analysis, all within the scope of confidentially overseeing AI development and deployment that uses thousands of high-end AI chips. We find that states could eventually verify compliance by using six largely independent verification approaches with substantial redundancy: (1) built-in security features in AI chips; (2-3) separate monitoring devices attached to AI chips; and (4-6) personnel-based mechanisms, such as whistleblower programs. While promising, these approaches require guardrails to protect against abuse and power concentration, and many of these technologies have yet to be built or stress-tested. To enable states to confidently verify compliance with rules on large-scale AI development and deployment, the R&D challenges we list need significant progress.

This paper presents a fully automated, data-driven framework for the large-scale deployment of reconfigurable intelligent surfaces (RISs) in cellular networks. Leveraging physically consistent ray tracing and empirical data from a commercial deployment in the UK, the proposed method jointly optimizes RIS placement, orientation, configuration, and base station beamforming in dense urban environments across frequency bands (corresponding to 4G, 5G, and a hypothetical 6G system). Candidate RIS locations are identified via reflection- and scattering-based heuristics using calibrated electromagnetic models within the Sionna Ray Tracing (RT) engine. Outage users are clustered to reduce deployment complexity, and the tradeoff between coverage gains and infrastructure cost is systematically evaluated. It is shown that achieving meaningful coverage improvement in urban areas requires a dense deployment of large-aperture RIS units, raising questions about cost-effectiveness. To facilitate reproducibility and future research, the complete simulation framework and RIS deployment algorithms are provided as open-source software.

Automatic speaker verification (ASV) is one of the most natural and convenient means of biometric person recognition. Unfortunately, just like all other biometric systems, ASV is vulnerable to spoofing, also referred to as "presentation attacks." These vulnerabilities are generally unacceptable and call for spoofing countermeasures or "presentation attack detection" systems. In addition to impersonation, ASV systems are vulnerable to replay, speech synthesis, and voice conversion attacks. The ASVspoof 2019 edition is the first to consider all three spoofing attack types within a single challenge. While they originate from the same source database and same underlying protocol, they are explored in two specific use case scenarios. Spoofing attacks within a logical access (LA) scenario are generated with the latest speech synthesis and voice conversion technologies, including state-of-the-art neural acoustic and waveform model techniques. Replay spoofing attacks within a physical access (PA) scenario are generated through carefully controlled simulations that support much more revealing analysis than possible previously. Also new to the 2019 edition is the use of the tandem detection cost function metric, which reflects the impact of spoofing and countermeasures on the reliability of a fixed ASV system. This paper describes the database design, protocol, spoofing attack implementations, and baseline ASV and countermeasure results. It also describes a human assessment on spoofed data in logical access. It was demonstrated that the spoofing data in the ASVspoof 2019 database have varied degrees of perceived quality and similarity to the target speakers, including spoofed data that cannot be differentiated from bona-fide utterances even by human subjects.

Recent progress in generative AI has made it increasingly easy to create natural-sounding deepfake speech from just a few seconds of audio. While these tools support helpful applications, they also raise serious concerns by making it possible to generate convincing fake speech in many languages. Current research has largely focused on detecting fake speech, but little attention has been given to tracing the source models used to generate it. This paper introduces the first benchmark for multilingual speech deepfake source tracing, covering both mono- and cross-lingual scenarios. We comparatively investigate DSP- and SSL-based modeling; examine how SSL representations fine-tuned on different languages impact cross-lingual generalization performance; and evaluate generalization to unseen languages and speakers. Our findings offer the first comprehensive insights into the challenges of identifying speech generation models when training and inference languages differ. The dataset, protocol and code are available at https://github.com/xuanxixi/Multilingual-Source-Tracing.

In parallel to the cyber attack that manipulates the reference points of distributed energy resources (DERs) by maliciously accessing the remote monitoring and control system, the vulnerability of voltage/current sensors to electromagnetic interference (EMI) in the physical domain has been widely discussed. Existing research efforts against sensor spoofing attacks can be classified into physical prevention and cyber detection/mitigation. These defence methods each have strengths and weaknesses in balancing cost, security, and performance in a single DER, yet systematic research on their multi-layer efficient coordination across DERs remains limited. Towards this end, this paper proposes a hierarchical framework to detect and mitigate sensor spoofing attacks in networked microgrids (NMGs) via {multi-layer cyber-physical coordination}. It requires only to deploy physical prevention technologies at critical points, i.e., the local points of common coupling (PCC) of MGs, such that cyber detection/mitigation algorithms can be adopted based on the secured sensor readings to counter sensor spoofing attacks in DERs. The framework employs an MG-DER coordinated proactive detection scheme to strategically trigger parameter perturbations, under which the intelligent sensor spoofing attacks can be {effectively} disclosed. Afterwards, mitigation schemes based on MG-DER coordination are activated to recursively and accurately estimate sensor biases. Experiments on a cyber-physical DC NMG testbed confirm the framework's effectiveness across diverse attack scenarios.

Factual hallucination remains a central challenge for large language models (LLMs). Existing mitigation approaches primarily rely on either external post-hoc verification or mapping uncertainty directly to abstention during fine-tuning, often resulting in overly conservative behavior. We propose VeriFY, a training-time framework that teaches LLMs to reason about factual uncertainty through consistency-based self-verification. VeriFY augments training with structured verification traces that guide the model to produce an initial answer, generate and answer a probing verification query, issue a consistency judgment, and then decide whether to answer or abstain. To address the risk of reinforcing hallucinated content when training on augmented traces, we introduce a stage-level loss masking approach that excludes hallucinated answer stages from the training objective while preserving supervision over verification behavior. Across multiple model families and scales, VeriFY reduces factual hallucination rates by 9.7 to 53.3 percent, with only modest reductions in recall (0.4 to 5.7 percent), and generalizes across datasets when trained on a single source. The source code, training data, and trained model checkpoints will be released upon acceptance.

The forthcoming era of massive drone delivery deployment in urban environments raises a need to develop reliable control and monitoring systems. While active solutions, i.e., wireless sharing of a real-time location between air traffic participants and control units, are of use, developing additional security layers is appealing. Among various surveillance systems, radars offer distinct advantages by operating effectively in harsh weather conditions and providing high-resolution reliable detection over extended ranges. However, contrary to traditional airborne targets, small drones and copters pose a significant problem for radar systems due to their relatively small radar cross-sections. Here, we propose an efficient approach to label drones by attaching passive resonant scatterers to their rotor blades. While blades themselves generate micro-Doppler rotor-specific signatures, those are typically hard to capture at large distances owing to small signal-to-noise ratios in radar echoes. Furthermore, drones from the same vendor are indistinguishable by their micro-Doppler signatures. Here we demonstrate that equipping the blades with multiple resonant scatterers not only extends the drone detection range but also assigns it a unique micro-Doppler encoded identifier. By extrapolating the results of our laboratory and outdoor experiments to real high-grade radar surveillance systems, we estimate that the clear-sky identification range for a small drone is approximately 3-5 kilometers, whereas it would be barely detectable at 1000 meters if not labeled. This performance places the proposed passive system on par with its active counterparts, offering the clear benefits of reliability and resistance to jamming.

Passive space-borne radiometers operating in the 1400-1427 MHz protected frequency band face radio frequency interference (RFI) from terrestrial sources. With the growth of wireless devices and the appearance of new technologies, the possibility of sharing this spectrum with other technologies would introduce more RFI to these radiometers. This band could be an ideal mid-band frequency for 5G and Beyond, as it offers high capacity and good coverage. Current RFI detection and mitigation techniques at SMAP (Soil Moisture Active Passive) depend on correctly detecting and discarding or filtering the contaminated data leading to the loss of valuable information, especially in severe RFI cases. In this paper, we propose an autoencoder-based RFI mitigation method to remove the dominant RFI caused by potential coexistent terrestrial users (i.e., 5G base station) from the received contaminated signal at the passive receiver side, potentially preserving valuable information and preventing the contaminated data from being discarded.

Radio frequency (RF) signal mapping, which is the process of analyzing and predicting the RF signal strength and distribution across specific areas, is crucial for cellular network planning and deployment. Traditional approaches to RF signal mapping rely on statistical models constructed based on measurement data, which offer low complexity but often lack accuracy, or ray tracing tools, which provide enhanced precision for the target area but suffer from increased computational complexity. Recently, machine learning (ML) has emerged as a data-driven method for modeling RF signal propagation, which leverages models trained on synthetic datasets to perform RF signal mapping in "unseen" areas. In this paper, we present Geo2SigMap, an ML-based framework for efficient and high-fidelity RF signal mapping using geographic databases. First, we develop an automated framework that seamlessly integrates three open-source tools: OpenStreetMap (geographic databases), Blender (computer graphics), and Sionna (ray tracing), enabling the efficient generation of large-scale 3D building maps and ray tracing models. Second, we propose a cascaded U-Net model, which is pre-trained on synthetic datasets and employed to generate detailed RF signal maps, leveraging environmental information and sparse measurement data. Finally, we evaluate the performance of Geo2SigMap via a real-world measurement campaign, where three types of user equipment (UE) collect over 45,000 data points related to cellular information from six LTE cells operating in the citizens broadband radio service (CBRS) band. Our results show that Geo2SigMap achieves an average root-mean-square-error (RMSE) of 6.04 dB for predicting the reference signal received power (RSRP) at the UE, representing an average RMSE improvement of 3.59 dB compared to existing methods.

Full-wave electromagnetic (EM) simulation enables accurate patch-antenna analysis but is computationally expensive for large-scale forward prediction and inverse design. We present a mesh-native, physics-augmented graph-learning framework that treats radiation-pattern prediction as signal reconstruction on an irregular surface mesh. For the forward problem, a GPS graph transformer is trained with Physics-Augmented Intermediate Supervision (PAIS), an auxiliary node-level objective that predicts complex surface currents, the physical intermediate linking geometry to radiation. PAIS improves multiple GNN backbones at no inference-time cost, while shuffled-current and non-physical controls show the gain comes from physical correspondence. Direction-conditioned decoding and a differentiable radiation-integral consistency loss further exploit this structure. On an 80,000-sample CST benchmark, GPS+PAIS reaches MSE 0.17 / PSNR 19.67, generalizes to a PCA split, and transfers zero-shot to canonical patches. For inverse design, surrogate-filtered diffusion beats nearest-neighbor retrieval by 32% relative MSE.

As a promising non-password authentication technology, radio frequency (RF) fingerprinting can greatly improve wireless security. Recent work has shown that RF fingerprinting based on deep learning can significantly outperform conventional approaches. The superiority, however, is mainly attributed to supervised learning using a large amount of labeled data, and it significantly degrades if only limited labeled data is available, making many existing algorithms lack practicability. Considering that it is often easier to obtain enough unlabeled data in practice with minimal resources, we leverage deep semi-supervised learning for RF fingerprinting, which largely relies on a composite data augmentation scheme designed for radio signals, combined with two popular techniques: consistency-based regularization and pseudo-labeling. Experimental results on both simulated and real-world datasets demonstrate that our proposed method for semi-supervised RF fingerprinting is far superior to other competing ones, and it can achieve remarkable performance almost close to that of fully supervised learning with a very limited number of examples.

Tool-using LLM agents increasingly use the Model Context Protocol (MCP) to answer from heterogeneous evidence sources, including search, APIs, databases, clinical records, and formulary tools. Standard factuality metrics usually test whether an answer is supported by pooled evidence, missing a provenance-sensitive failure mode: a claim may be supported somewhere while being attributed to the wrong source. We call this cross-source conflation. We introduce ProvenanceGuard, a source-aware verifier for MCP-grounded answers. It consumes captured MCP traces with stable tool IDs, source IDs, and raw outputs; decomposes answers into atomic claims; routes claims to source-specific evidence; checks support with NLI and a token-alignment proxy; compares stated attribution with the routed source; and returns per-claim verdicts plus an answer-level allow/block decision. Blocked answers can be repaired with retrieval-augmented answer revision and re-verified. We evaluate on 281 medical-domain MCP-agent traces. A 266-trace adjudicated subset yields 2,325 LLM-assisted claim labels split by trace; 361 held-out labels are human-verified. On the 40-trace held-out split, ProvenanceGuard achieves block F1 0.802 and source accuracy 0.858 over 260 source-eligible claims, outperforming source-blind baselines that do not emit claim-to-source IDs. On a harder multi-source benchmark it reaches block F1 0.846, while source-plus-relation accuracy drops to 0.229, showing that exact source ownership remains difficult with semantically close sources. Repair-and-reverify resolves all blocked answers in the full trace set, often via conservative fallback. In 50 controlled clinical conflation probes, ProvenanceGuard detects all injected attribution swaps with no retained wrong attribution. These results show that source attribution is an independent axis for factuality verification in MCP-based agents.

We present a systems-security case study of a two-node split-LLM training system whose privacy evaluation passed while leaving an observable channel untested. The Trusted Local Node (TLN) sends protected activations to the Untrusted Cloud Node (UCN), the UCN returns its output, and TLN, holding the private loss, returns the output gradient. The frame the UCN receives mixes real rows with decoys, and the loss ignores the decoys. Their gradients are exactly zero, so the pattern of zeros reveals which rows were real. We measure it with a protocol fixed in advance: a leak injected at known strength to prove the instrument can see one, a shuffled-label control to prove it does not report absent leaks, and a threshold set before the runs. Across nine seeds, the zeros identified the real rows on every frame, 4,096 of 4,096 per run. An attack on the frame contents recovered about one extra token per hundred over a constant-guess baseline (+0.65 to +1.50 percentage points); the shuffled controls recovered nothing. A second set of runs repeated this on a configuration that keeps model quality within budget, so the finding is not confined to a setting nobody would deploy. On both datasets, every such run passed the forward-channel privacy check and the quality check, yet failed that same check once the returned gradient was included. Clipping and noising each row of the gradient closed the leak for about 0.01 nats of held-out cross-entropy. The system is not thereby safe: five classes of attack, including those accumulating observations across training steps, were never measured.

The proliferation of Large Language Models (LLMs) accessed via black-box APIs introduces a significant trust challenge: users pay for services based on advertised model capabilities (e.g., size, performance), but providers may covertly substitute the specified model with a cheaper, lower-quality alternative to reduce operational costs. This lack of transparency undermines fairness, erodes trust, and complicates reliable benchmarking. Detecting such substitutions is difficult due to the black-box nature, typically limiting interaction to input-output queries. This paper formalizes the problem of model substitution detection in LLM APIs. We systematically evaluate existing verification techniques, including output-based statistical tests, benchmark evaluations, and log probability analysis, under various realistic attack scenarios like model quantization, randomized substitution, and benchmark evasion. Our findings reveal the limitations of methods relying solely on text outputs, especially against subtle or adaptive attacks. While log probability analysis offers stronger guarantees when available, its accessibility is often limited. We conclude by discussing the potential of hardware-based solutions like Trusted Execution Environments (TEEs) as a pathway towards provable model integrity, highlighting the trade-offs between security, performance, and provider adoption. Code is available at https://github.com/sunblaze-ucb/llm-api-audit

Offline retrieval-augmented generation (RAG) on edge devices is updated through signed knowledge packs that carry text and precomputed embedding vectors. A signature proves who published a pack, not that its vectors encode its text. We study this text-vector integrity gap. A verifier that recomputes vectors and accepts them within a cosine tolerance concedes a predictable share of queries to an attacker who controls the vectors: the hijack rate equals the distribution of angular retrieval margins at the tolerance (the margin law). Margins are small in five corpora and two embedding models, so an idealised tolerance at the level of floating-point noise leaves up to 5.5% of queries exposed (at most 1.2% in any corpus once exact duplicate documents are excluded), and a threshold calibrated from our CPU INT8-FP32 comparison of a small embedding model (at the empirical 0.1% quantile of honest cosines) leaves 98-100% exposed; on a Raspberry Pi 5 running a local language model, such an attack lowers correct answers from 0.75 to 0.39. Integrity audits of compressed vector stores fare no better: on a FAISS product-quantisation index over 57,638 documents, tampered vectors that all pass the audit put the attacker's document first for 25% of targets. Verifying quantisation codes instead, with ambiguity decided by the verifier, a calibrated guard band and canonicalisation, accepted every honest vector in our samples on three platforms and left the publisher no choice. We also show that common floating-point and dynamic-INT8 inference pipelines are not bit-reproducible across batch sizes or architectures, and report pre-registered negative results on abstention, context pruning and semantic screening. We release code and data.

Generative AI and large language models (LLMs) are moving into the Internet of Things, yet most deployments assume cloud connectivity, and many IoT settings have intermittent, restricted, or no connectivity. We propose a connectivity-regime framework (C0-C4), a taxonomy of inference-time trust mechanisms, and signed, versioned knowledge packs as the update channel for disconnected regimes, and evaluate them on a Raspberry Pi 5 running fully local retrieval-augmented generation under network isolation, with three Qwen2.5 model sizes, three context sizes, and 300 SQuAD 2.0 questions. An empirically calibrated retrieval-score gate detects knowledge gaps almost perfectly (AUROC 0.97) but in-topic unanswerable questions poorly (0.68). A deterministic output validator converts malformed outputs into explicit abstentions with no observed loss of correct answers, while the NLI-based verifier we tested adds little; for the 7B model, 96% of substantive answers to unanswerable-labelled questions match normalized spans of the retrieved passages. A 3B model achieves the same gold-answer containment rate as a 7B model at less than half the latency and estimated energy, although the 7B model far more often exceeds a token-F1 threshold of 0.5; five retrieved passages lower correctness from 75% to 52% compared with three. Verifying a signed pack takes about 4.5 ms versus about 29 min for embedding its passages on the device; signature and hash checks alone accept six of nine tested update attacks that layered verification rejects. Yet a validly signed poisoned pack passes every pack check: on 30 previously correct questions, correct answers drop to zero and 14 return the injected answer. None of the mechanisms we evaluated establishes the truth of the evidence. We release code and data.

ASVspoof 2021 is the forth edition in the series of bi-annual challenges which aim to promote the study of spoofing and the design of countermeasures to protect automatic speaker verification systems from manipulation. In addition to a continued focus upon logical and physical access tasks in which there are a number of advances compared to previous editions, ASVspoof 2021 introduces a new task involving deepfake speech detection. This paper describes all three tasks, the new databases for each of them, the evaluation metrics, four challenge baselines, the evaluation platform and a summary of challenge results. Despite the introduction of channel and compression variability which compound the difficulty, results for the logical access and deepfake tasks are close to those from previous ASVspoof editions. Results for the physical access task show the difficulty in detecting attacks in real, variable physical spaces. With ASVspoof 2021 being the first edition for which participants were not provided with any matched training or development data and with this reflecting real conditions in which the nature of spoofed and deepfake speech can never be predicated with confidence, the results are extremely encouraging and demonstrate the substantial progress made in the field in recent years.

Unmanned aerial vehicles (UAVs) are cyber-physical systems whose attack surface spans networked avionics and on-board sensor fusion: a compromised GPS or battery module can mimic a benign mission segment and evade naive anomaly detectors. We present a leakage-free evaluation of quantum machine learning for UAV anomaly detection on the multi-sensor TLM:UAV benchmark. Three contributions support the study. (i) A group-aware temporal protocol (B2) partitions the dataset into ten contiguous TimeUS blocks and evaluates over ten seeds, eliminating the inflation produced by random stratified splits that mix neighbouring samples. (ii) A three-mode feature audit (full/loose/strict) quantifies how much accuracy stems from instantaneous physical signals versus contextual proxies (cumulative energy, battery state, GPS trajectory). (iii) A hybrid XGBoost + Data Reuploading (DRU) classifier is benchmarked against five paired non-linear controls (raw, PCA, polynomial-2, random-RBF, and an untrained DRU map) under identical budgets. The standalone DRU does not consistently match the strongest classical baseline across seeds; however, the trained-DRU hybrid is the only model whose mean F1 macro shifts upward from full to strict (+0.05), a directional signal that the per-seed standard deviations prevent from being interpreted as a statistically established difference. The trained-DRU hybrid also records the lowest mean false-alarm rate under proxy-free evaluation, subject to the inter-seed variance reported. We frame this as an incremental, reproducible quantum-enhanced hybrid benefit, and provide an open Qiskit 2.x implementation as a benchmark for cybersecurity analytics in NISQ-era aerospace systems.

The security context used in 5G authentication is generated during the Authentication and Key Agreement (AKA) procedure and stored in both the user equipment (UE) and the network sides for the subsequent fast registration procedure. Given its importance, it is imperative to formally analyze the security mechanism of the security context. The security context in the UE can be stored in the Universal Subscriber Identity Module (USIM) card or in the baseband chip. In this work, we present a comprehensive and formal verification of the fast registration procedure based on the security context under the two scenarios in ProVerif. Our analysis identifies two vulnerabilities, including one that has not been reported before. Specifically, the security context stored in the USIM card can be read illegally, and the validity checking mechanism of the security context in the baseband chip can be bypassed. Moreover, these vulnerabilities also apply to 4G networks. As a consequence, an attacker can exploit these vulnerabilities to register to the network with the victim's identity and then launch other attacks, including one-tap authentication bypass leading to privacy disclosure, location spoofing, etc. To ensure that these attacks are indeed realizable in practice, we have responsibly confirmed them through experimentation in three operators. Our analysis reveals that these vulnerabilities stem from design flaws of the standard and unsafe practices by operators. We finally propose several potential countermeasures to prevent these attacks. We have reported our findings to the GSMA and received a coordinated vulnerability disclosure (CVD) number CVD-2022-0057.

Human verification under adversarial information flow operates as a cost-bounded decision procedure constrained by working memory limits and cognitive biases. We introduce the Verification Cost Asymmetry (VCA) coefficient, formalizing it as the ratio of expected verification work between populations under identical claim distributions. Drawing on probabilistically checkable proofs (PCP) and parameterized complexity theory, we construct dissemination protocols that reduce verification for trusted audiences to constant human effort while imposing superlinear costs on adversarial populations lacking cryptographic infrastructure. We prove theoretical guarantees for this asymmetry, validate the framework through controlled user studies measuring verification effort with and without spot-checkable provenance, and demonstrate practical encoding of real-world information campaigns. The results establish complexity-theoretic foundations for engineering democratic advantage in cognitive warfare, with immediate applications to content authentication, platform governance, and information operations doctrine.

Can humans tell whether a news article was written by a person or a large language model (LLM)? We investigate this question using JudgeGPT, a study platform that independently measures source attribution (human vs. machine) and authenticity judgment (legitimate vs. fake) on continuous scales. From 2,318 judgments collected from 1,054 participants across content generated by six LLMs, we report five findings: (1) participants cannot reliably distinguish machine-generated from human-written text (p > .05, Welch's t-test); (2) this inability holds across all tested models, including open-weight models with as few as 7B parameters; (3) self-reported domain expertise predicts judgment accuracy (r = .35, p < .001) whereas political orientation does not (r = -.10, n.s.); (4) clustering reveals distinct response strategies ("Skeptics" vs. "Believers"); and (5) accuracy degrades after approximately 30 sequential evaluations due to cognitive fatigue. The answer, in short, is no: humans cannot reliably tell. These results indicate that user-side detection is not a viable defense and motivate system-level countermeasures such as cryptographic content provenance.

This paper introduces RawBoost, a data boosting and augmentation method for the design of more reliable spoofing detection solutions which operate directly upon raw waveform inputs. While RawBoost requires no additional data sources, e.g. noise recordings or impulse responses and is data, application and model agnostic, it is designed for telephony scenarios. Based upon the combination of linear and non-linear convolutive noise, impulsive signal-dependent additive noise and stationary signal-independent additive noise, RawBoost models nuisance variability stemming from, e.g., encoding, transmission, microphones and amplifiers, and both linear and non-linear distortion. Experiments performed using the ASVspoof 2021 logical access database show that RawBoost improves the performance of a state-of-the-art raw end-to-end baseline system by 27% relative and is only outperformed by solutions that either depend on external data or that require additional intervention at the model level.

Large audio-language models have shown promise for anti-fraud detection by directly processing speech and reasoning over fraud-related evidence. Their deployment, however, requires predictions to follow a predefined label space and a structured decision protocol consisting of service-scenario identification, fraud detection, and conditional fraud-type classification. Existing fine-tuning and prompt-based approaches typically encode task knowledge, constraints, and decision rules into model parameters or manually maintained prompts, making them difficult to adapt as fraud patterns and labeling policies evolve. To this end, we propose FRAUDSkill, a structured frozen-weight adaptation framework that leaves the underlying audio-language model unchanged while optimizing an external layer of skill programs, route-specific policies, and decision rules. We further combine structured output control with validation-guided multi-path inference to ensure protocol-compliant predictions. On the TeleAntiFraud benchmark, FRAUDSkill achieves 73.50% Macro-F1, outperforming the shared frozen-model baseline by 31.96% while reducing invalid outputs to 1.94%. Extensive experiments demonstrate that external skill optimization provides an effective and adaptable solution for structured audio anti-fraud detection without modifying the underlying model. The source code is available at https://anonymous.4open.science/r/FRAUDSKILL-114514.

We consider low-latency image transmission over a noisy wireless channel when correlated side information is present only at the receiver side (the Wyner-Ziv scenario). In particular, we are interested in developing practical schemes using a data-driven joint source-channel coding (JSCC) approach, which has been previously shown to outperform conventional separation-based approaches in the practical finite blocklength regimes, and to provide graceful degradation with channel quality. We propose a novel neural network architecture that incorporates the decoder-only side information at multiple stages at the receiver side. Our results demonstrate that the proposed method succeeds in integrating the side information, yielding improved performance at all channel noise levels in terms of the various distortion criteria considered here, especially at low channel signal-to-noise ratios (SNRs) and small bandwidth ratios (BRs). We also provide the source code of the proposed method to enable further research and reproducibility of the results.

Multimodal Large Language Models have demonstrated powerful cross-modal understanding and reasoning capabilities in general domains. However, in the electromagnetic (EM) domain, they still face challenges such as data scarcity and insufficient integration of domain knowledge. This paper proposes PReD, the first foundation model for the EM domain that covers the intelligent closed-loop of "perception, recognition, decision-making." We constructed a high-quality multitask EM dataset, PReD-1.3M, and an evaluation benchmark, PReD-Bench. The dataset encompasses multi-perspective representations such as raw time-domain waveform, frequency-domain spectrograms, and constellation diagrams, covering typical features of communication and radar signals. It supports a range of core tasks, including signal detection, modulation recognition, parameter estimation, protocol recognition, radio frequency fingerprint recognition, and anti-jamming decision-making. PReD adopts a multi-stage training strategy that unifies multiple tasks for EM signals. It achieves closed-loop optimization from end-to-end signal understanding to language-driven reasoning and decision-making, significantly enhancing EM domain expertise while maintaining general multimodal capabilities. Experimental results show that PReD achieves state-of-the-art performance on PReD-Bench constructed from both open-source and self-collected signal datasets. These results collectively validate the feasibility and potential of vision-aligned foundation models in advancing the understanding and reasoning of EM signals.

Deep learning (DL) applied to a device's radio-frequency fingerprint~(RFF) has attracted significant attention in physical-layer authentication due to its extraordinary classification performance. Conventional DL-RFF techniques are trained by adopting maximum likelihood estimation~(MLE). Although their discriminability has recently been extended to unknown devices in open-set scenarios, they still tend to overfit the channel statistics embedded in the training dataset. This restricts their practical applications as it is challenging to collect sufficient training data capturing the characteristics of all possible wireless channel environments. To address this challenge, we propose a DL framework of disentangled representation~(DR) learning that first learns to factor the signals into a device-relevant component and a device-irrelevant component via adversarial learning. Then, it shuffles these two parts within a dataset for implicit data augmentation, which imposes a strong regularization on RFF extractor learning to avoid the possible overfitting of device-irrelevant channel statistics, without collecting additional data from unknown channels. Experiments validate that the proposed approach, referred to as DR-based RFF, outperforms conventional methods in terms of generalizability to unknown devices even under unknown complicated propagation environments, e.g., dispersive multipath fading channels, even though all the training data are collected in a simple environment with dominated direct line-of-sight~(LoS) propagation paths.

Post-training quantization is often treated as a semantically neutral optimization for edge deployment of Large Language Models. When a full-precision source checkpoint is evaluated and quantization is applied downstream without equivalent re-evaluation, this workflow creates a structural validation--deployment gap: because quantization is a many-to-one mapping over parameter space, source-precision certification does not guarantee behavioral equivalence in the deployed configuration. We formalize this gap through Quantization Behavioral Equivalence Classes (QBECs) and prove that QBEC membership does not imply behavioral equivalence, providing a theoretical basis for quantization-triggered backdoor attacks. Building on a three-stage adversarial fine-tuning framework, we embed latent malicious payloads into models that satisfy the source-precision checks used in our evaluation, yet activate targeted adversarial behavior upon INT8 or 4-bit compression. We evaluate this threat in two operationally motivated scenarios, tactical machine translation and political content analysis, extending prior work from decoder-only causal LMs to multilingual encoder-decoder sequence-to-sequence models. Results show that backdoored translation models move from zero measured friend--foe corruption at repaired FP16 to up to 85.02% inversion after quantization, and that a paired stance classifier measures an ideological shift of up to ΔBias=0.33 upon compression. A cross-quantizer transferability analysis further shows that attack persistence varies across quantization schemes and model architectures, rather than being determined by nominal bit-width alone. These findings demonstrate that source-precision auditing alone does not rule out quantization-triggered behavior and that the final deployed configuration must be included in behavioral certification for trustworthy edge AI.

Radio-frequency coverage maps (RF maps) are extensively utilized in wireless networks for capacity planning, placement of access points and base stations, localization, and coverage estimation. Conducting site surveys to obtain RF maps is labor-intensive and sometimes not feasible. In this paper, we propose radio-frequency adversarial deep-learning inference for automated network coverage estimation (RADIANCE), a generative adversarial network (GAN) based approach for synthesizing RF maps in indoor scenarios. RADIANCE utilizes a semantic map, a high-level representation of the indoor environment to encode spatial relationships and attributes of objects within the environment and guide the RF map generation process. We introduce a new gradient-based loss function that computes the magnitude and direction of change in received signal strength (RSS) values from a point within the environment. RADIANCE incorporates this loss function along with the antenna pattern to capture signal propagation within a given indoor configuration and generate new patterns under new configuration, antenna (beam) pattern, and center frequency. Extensive simulations are conducted to compare RADIANCE with ray-tracing simulations of RF maps. Our results show that RADIANCE achieves a mean average error (MAE) of 0.09, root-mean-squared error (RMSE) of 0.29, peak signal-to-noise ratio (PSNR) of 10.78, and multi-scale structural similarity index (MS-SSIM) of 0.80.

Digital signatures prove key possession, not authorship. An author who generates text with AI, constructs intermediate document states post-hoc, and signs each hash produces a signature chain indistinguishable from genuine composition. We address this gap between cryptographic integrity and process provenance. We introduce proof-of-process, a primitive category for evidence that a physical process, not merely a signing key, produced a digital artifact. Our construction, the jitter seal, injects imperceptible microsecond delays derived via HMAC from a session secret, keystroke ordinal, and cumulative document hash. Valid evidence requires that real keystrokes produced the document through those intermediate states. We propose the Adversarial Collapse Principle as an evaluation criterion: evidence systems should be judged by whether disputing them requires a conjunction of specific, testable allegations against components with independent trust assumptions. We present Witnessd, an architecture combining jitter seals with Verifiable Delay Functions, external timestamp anchors, dual-source keystroke validation, and optional hardware attestation. Each layer forces allegations at different capability levels; disputing authentic evidence requires coordinated claims across independent trust boundaries. The system does not prevent forgery: a kernel-level adversary can defeat it, and typing AI-generated content produces valid evidence. The contribution is converting vague doubt into falsifiable allegations. We evaluate across 31,000 verification trials with deterministic rejection of invalid proofs.

Sixth generation (6G) systems require environment-aware communication, driven by native artificial intelligence (AI) and integrated sensing and communication (ISAC). Radio maps (RMs), providing spatially continuous channel information, are key enablers. However, generating high-fidelity RM ground truth via electromagnetic (EM) simulations is computationally intensive, motivating machine learning (ML)-based RM construction. The effectiveness of these data-driven methods depends on large-scale, high-quality training data. Current public datasets often focus on single-input single-output (SISO) and limited information, such as path loss, which is insufficient for advanced multi-input multi-output (MIMO) systems requiring detailed channel state information (CSI). To address this gap, this paper presents UrbanMIMOMap, a novel large-scale urban MIMO CSI dataset generated using high-precision ray tracing. UrbanMIMOMap offers comprehensive complex CSI matrices across a dense spatial grid, going beyond traditional path loss data. This rich CSI is vital for constructing high-fidelity RMs and serves as a fundamental resource for data-driven RM generation, including deep learning. We demonstrate the dataset's utility through baseline performance evaluations of representative ML methods for RM construction. This work provides a crucial dataset and reference for research in high-precision RM generation, MIMO spatial performance, and ML for 6G environment awareness. The code and data for this work are available at: https://github.com/UNIC-Lab/UrbanMIMOMap.

Machine learning-based intrusion detection systems (IDS) are critical for securing Industrial Internet of Things (IIoT) environments. Most adversarial research against them perturbs the feature vector or the traffic that produces it, and depends on gradient access, repeated model queries, or a learned model of benign traffic. A smaller line of work reshapes packet timing without querying the detector, but makes malicious traffic mimic a learned model of benign timing. Across these approaches, one assumption of industrial monitoring pipelines has received little attention: temporal synchronization. An IDS reconstructs operational state by aggregating telemetry into sliding or tumbling windows, so its view depends not only on what is observed but on when each observation falls relative to a window boundary. We introduce the Phantom State Attack (PSA), which exploits that dependence under a passive, zero-query threat model. Rather than modifying packets, perturbing features, querying the classifier, or fitting any model of benign traffic, PSA injects bounded timing drift calibrated to the attack flow's own inter-arrival variability, moving observations across the nearest window boundary by the minimal shift needed. The IDS then reconstructs a phantom state that diverges from the true process state. We evaluate PSA on ToN-IoT and CIC IIoT 2025 (DataSense), against Random Forest, MLP and XGBoost, measuring detection degradation, synchronization distortion, stealth, and attacker cost. PSA degrades detection on flows carrying enough packets for window-boundary redistribution, and leaves others almost unchanged, so its effect is conditional. A query-based baseline reaches higher raw success but needs many queries per window, while PSA needs none. The results identify temporal aggregation as an attack surface reachable under weaker assumptions than prior evasion techniques.

Telecom fraud scripts evolve rapidly and are often designed to resemble routine service conversations, creating two key requirements for audio-based telecom-fraud evaluation. First, benchmarks must incorporate newly observed scam patterns without overwriting previously established test sets. Second, they must distinguish fraud from lawful, near-domain calls rather than relying on topic-separated negative examples. We present TeleAntiFraud 2.0, constructed with our Mixed-Tree Anti-Fraud Generation Pipeline and evaluated under a monthly frozen evaluation protocol. The pipeline transforms online fraud-case abstracts into profile-grounded scenarios, expands them through mixed-tree generation, realizes fraud and non-fraud dialogue paths under shared contexts, renders validated dialogues as role-matched speech, and freezes the resulting audio, labels, prompts, manifests, and provenance records for each monthly evaluation set. Each frozen set contains 900 Chinese calls, comprising 600 fraud and 300 near-domain non-fraud cases. Controlled text experiments show that three classifiers achieve perfect macro-averaged F1 (Macro-F1) when evaluated against unrelated or ordinary negatives, but drop to 0.65-0.68 with near-domain sibling negatives. Full-set audio and automatic-speech-recognition plus large-language-model (ASR+LLM) evaluations further reveal class-prior shortcuts, prediction collapse, and snapshot sensitivity. Together, these findings establish near-domain construction and collapse-aware reporting as core requirements for evaluating audio-based telecom-fraud models under realistic confusable conditions. The accompanying research artifact includes the construction code, evaluation scripts, manifests, and documentation. Our dataset and code are available at https://anonymous.4open.science/r/TeleAntiFraud-2_0-EEB2/.

This paper investigates the radioactivity of LLM-generated texts, i.e. whether it is possible to detect that such input was used as training data. Conventional methods like membership inference can carry out this detection with some level of accuracy. We show that watermarked training data leaves traces easier to detect and much more reliable than membership inference. We link the contamination level to the watermark robustness, its proportion in the training set, and the fine-tuning process. We notably demonstrate that training on watermarked synthetic instructions can be detected with high confidence (p-value < 1e-5) even when as little as 5% of training text is watermarked. Thus, LLM watermarking, originally designed for detecting machine-generated text, gives the ability to easily identify if the outputs of a watermarked LLM were used to fine-tune another LLM.

Artificial Intelligence has become a double edged sword in modern society being both a boon and a bane. While it empowers individuals it also enables malicious actors to perpetrate scams such as fraudulent phone calls and user impersonations. This growing threat necessitates a robust system to protect individuals In this paper we introduce a novel real time fraud detection mechanism using Retrieval Augmented Generation technology to address this challenge on two fronts. First our system incorporates a continuously updating policy checking feature that transcribes phone calls in real time and uses RAG based models to verify that the caller is not soliciting private information thus ensuring transparency and the authenticity of the conversation. Second we implement a real time user impersonation check with a two step verification process to confirm the callers identity ensuring accountability. A key innovation of our system is the ability to update policies without retraining the entire model enhancing its adaptability. We validated our RAG based approach using synthetic call recordings achieving an accuracy of 97.98 percent and an F1score of 97.44 percent with 100 calls outperforming state of the art methods. This robust and flexible fraud detection system is well suited for real world deployment.

Retrieval-augmented generation (RAG) grounds answers in retrieved passages, yet relevance does not guarantee sufficiency: a topical passage may still fail to justify the answer. We study evidence sufficiency verification for selective RAG answering, in which a verifier receives a question, a candidate answer, and retrieved evidence and decides whether the evidence supports, refutes, or is insufficient for the answer, answering only when support is established. We present SURE-RAG, an aggregation protocol that treats evidence sufficiency as a set-level property: missing hops and unresolved conflicts cannot be detected by scoring passages independently. A shared claim-evidence verifier produces a local relation distribution for each (claim, passage) pair, which SURE-RAG aggregates into four interpretable answer-level feature blocks (coverage, relation strength, uncertainty, and retrieval), producing a three-way decision and an auditable selective score. We evaluate on HotpotQA-RAG v3, a controlled multi-hop benchmark, under an artifact-aware protocol (shortcut baselines, counterfactual swaps, no-oracle checks, and GPT-4o audits). Calibrated SURE-RAG attains 0.9075 Macro-F1 (raw 0.8951 +/- 0.0069), well above DeBERTa mean-pooling (0.6516) and a GPT-4o judge (0.7284), and on par with a strong concat cross-encoder (0.8888 +/- 0.0109) while remaining fully auditable. At 30% coverage, risk falls from 0.2588 to 0.1642, a 37% relative reduction. As a boundary-mapping experiment, we contrast SURE-RAG with GPT-4o on HaluBench unsafe detection: the ranking reverses (0.3343 vs. 0.7389 unsafe-F1), indicating that controlled sufficiency verification and natural hallucination detection are distinct problems.

Side-channel evaluators routinely inspect leakage tests while acquisition is still running, and extend or stop the campaign based on what they see. Fixed-horizon screening such as the Welch t-test with threshold |t|>4.5 gives no error guarantee for this monitored decision rule. We study anytime-valid leakage detection based on testing by betting: SKIT-type swap-pair e-processes whose false-alarm probability is controlled uniformly over time under an explicit conditional symmetry null. In matched comparisons that share the frozen witness, rows and payoff, first-crossing detection needed 1.68-2.00times the traces of a fixed-horizon randomization test at 80% detection on synthetic streams, and 1.68-2.38times on degraded recordings from an open ML-KEM electromagnetic dataset with the primary Ridge witness at α=0.05. With the same primary witness and level, on undegraded reference and pqm4 recordings the monitored procedure stopped early: its median stopping point was 62-72 and 146-316 evaluation traces, i.e. 2-8% of a conservative 4096-trace budget. Under exact designed nulls on the recorded backgrounds, repeated-look |t|>4.5 screening over all 13000-20000 samples raised a false alarm in 2.7-12.9% of replicates, against 0.0-4.7% for terminal-only screening and no rejection by a sample-wise e-Bonferroni process, which in a prespecified follow-up detected natural-label associations in 4 of 4 backgrounds after 840-3288 traces. All recordings come from one device, and natural-label results are descriptive; we state the assumptions each claim requires.

Artefacts that differentiate spoofed from bona-fide utterances can reside in spectral or temporal domains. Their reliable detection usually depends upon computationally demanding ensemble systems where each subsystem is tuned to some specific artefacts. We seek to develop an efficient, single system that can detect a broad range of different spoofing attacks without score-level ensembles. We propose a novel heterogeneous stacking graph attention layer which models artefacts spanning heterogeneous temporal and spectral domains with a heterogeneous attention mechanism and a stack node. With a new max graph operation that involves a competitive mechanism and an extended readout scheme, our approach, named AASIST, outperforms the current state-of-the-art by 20% relative. Even a lightweight variant, AASIST-L, with only 85K parameters, outperforms all competing systems.

The rapid advancement of generative models, facilitating the creation of hyper-realistic images from textual descriptions, has concurrently escalated critical societal concerns such as misinformation. Traditional fake detection mechanisms, although providing some mitigation, fall short in attributing responsibility for the malicious use of synthetic images. This paper introduces a novel approach to model fingerprinting that assigns responsibility for the generated images, thereby serving as a potential countermeasure to model misuse. Our method modifies generative models based on each user's unique digital fingerprint, imprinting a unique identifier onto the resultant content that can be traced back to the user. This approach, incorporating fine-tuning into Text-to-Image (T2I) tasks using the Stable Diffusion Model, demonstrates near-perfect attribution accuracy with a minimal impact on output quality. We rigorously scrutinize our method's secrecy under two distinct scenarios: one where a malicious user attempts to detect the fingerprint, and another where a user possesses a comprehensive understanding of our method. We also evaluate the robustness of our approach against various image post-processing manipulations typically executed by end-users. Through extensive evaluation of the Stable Diffusion models, our method presents a promising and novel avenue for accountable model distribution and responsible use.

The received in-phase and quadrature (I/Q) baseband signals inherently encode physical-layer and channel characteristics of wireless links. Learning robust and transferable representations directly from such raw signals, however, remains challenging due to heterogeneous communication systems, diverse propagation environments, and limited labeled data. To address this, we present LWM-Spectro, a transformer-based foundation model pretrained on large-scale I/Q data represented as time-frequency spectrograms. The model leverages self-supervised masked modeling, contrastive learning, and a mixture-of-experts (MoE) architecture to learn general-purpose wireless representations. These representations transfer effectively to downstream tasks such as modulation classification and joint SNR/mobility recognition, even with minimal supervision. Across tasks, LWM-Spectro consistently outperforms state-of-the-art deep learning baselines in both few-shot and data-rich regimes, providing a unified foundation for wireless learning.

Large language models (LLMs) and multimodal models have become powerful general-purpose reasoning systems. However, radio-frequency (RF) signals, which underpin wireless systems, are still not natively supported by these models. Existing LLM-based approaches for telecom focus mainly on text and structured data, while conventional RF deep-learning models are built separately for specific signal-processing tasks, highlighting a clear gap between RF perception and high-level reasoning. To bridge this gap, we introduce RF-GPT, a radio-frequency language model (RFLM) that utilizes the visual encoders of multimodal LLMs to process and understand RF spectrograms. In this framework, complex in-phase/quadrature (IQ) waveforms are mapped to time-frequency spectrograms and then passed to pretrained visual encoders. The resulting representations are injected as RF tokens into a decoder-only LLM, which generates RF-grounded answers, explanations, and structured outputs. To train RF-GPT, we perform supervised instruction fine-tuning of a pretrained multimodal LLM using a fully synthetic RF corpus. Standards-compliant waveform generators produce wideband scenes for six wireless technologies, from which we derive time-frequency spectrograms, exact configuration metadata, and dense captions. A text-only LLM then converts these captions into RF-grounded instruction-answer pairs, yielding roughly 12,000 RF scenes and 0.625 million instruction examples without any manual labeling. Across benchmarks for wideband modulation classification, overlap analysis, wireless-technology recognition, WLAN user counting, and 5G NR information extraction, RF-GPT achieves strong multi-task performance, whereas general-purpose VLMs with no RF grounding largely fail.

Long-form factuality verification is commonly implemented as a static decompose-search-verify pipeline, with separately prompted modules processing claims and invoking external search. Treating claims independently makes LLM and search calls scale with claim count and causes repeated searches for overlapping evidence about related claims. We introduce EAVer, an End-to-end Agentic Verifier that learns to control the complete response-level verification workflow as a unified policy. EAVer groups semantically related claims, routes each group to direct verification or targeted search based on confidence, and keeps evidence returned by search in compact in-context memos for cross-claim reuse. To train this policy, we develop a privileged-teacher synthesis pipeline that converts gold claim annotations into executable multi-turn tool-interaction trajectories with live search rather than post-hoc rationales. Structural, label-alignment, tool-use, search-budget, and leakage checks yield 1,447 quality-controlled trajectories. We further construct 794 bidirectional same-trajectory preference pairs that keep claim grouping, search, and evidence fixed, enabling decision-focused Direct Preference Optimization (DPO) over factuality-decision tokens. The results with Qwen3-8B show that EAVer outperforms the strongest search-based baseline on each benchmark by 2.88 Macro-F1 points on VeriFastScore and 4.73 points on the out-of-distribution FaStFact-Bench, while using about 80% fewer searches than the most search-efficient baseline. Moreover, EAVer consistently improves performance across models ranging from 4B to 32B parameters, demonstrating its strong generalizability.

As more devices connect to the internet, it becomes crucial to address their limitations and basic security needs. While much research focuses on utilizing ML and DL to tackle security challenges, there is often a tendency to overlook the practicality and feasibility of implementing these methods in real-time settings. This oversight stems from the constrained processing power and memory of certain devices (IoT devices), as well as concerns about the generalizability of these approaches. Focusing on the detection of DNS-tunneling attacks in a router as a case study, we present an end-to-end process designed to effectively address these challenges. The process spans from developing a lightweight DNS-tunneling detection model to integrating it into a resource-constrained device for real-time detection. Through our experiments, we demonstrate that utilizing stateless features for training the ML model, along with features chosen to be independent of the network configuration, leads to highly accurate results. The deployment of this carefully crafted model, optimized for embedded devices across diverse environments, resulted in high DNS-tunneling attack detection with minimal latency. With this work, we aim to encourage solutions that strike a balance between theoretical advancements and the practical applicability of ML approaches in the ever-evolving landscape of device security.

Retrieval-enhanced methods have become a primary approach in fact verification (FV); it requires reasoning over multiple retrieved pieces of evidence to verify the integrity of a claim. To retrieve evidence, existing work often employs off-the-shelf retrieval models whose design is based on the probability ranking principle. We argue that, rather than relevance, for FV we need to focus on the utility that a claim verifier derives from the retrieved evidence. We introduce the feedback-based evidence retriever(FER) that optimizes the evidence retrieval process by incorporating feedback from the claim verifier. As a feedback signal we use the divergence in utility between how effectively the verifier utilizes the retrieved evidence and the ground-truth evidence to produce the final claim label. Empirical studies demonstrate the superiority of FER over prevailing baselines.

The goal of L-step speculative decoding is to accelerate autoregressive decoding of a target model by using a cheaper draft model to generate a candidate path of L tokens. Based on a verification algorithm involving target and draft model probabilities, a prefix of the candidate sequence is accepted, and an additional correction token is sampled from a residual distribution to ensure that the final output adheres to the target distribution. While standard speculative decoding uses a verification algorithm which is independent at each token on the path, a recent extension called block verification uses a joint condition involving all sampled on-path probabilities. Block verification (BV) was shown to be optimal over all verification algorithms which use only on-path probabilities, improving on standard speculative decoding. In this work, we first show that block verification is optimal even over verification algorithms that use off-path probabilities, by constructing an information-agnostic linear program (LP). Further, we can extend our LP to the setting where the draft model samples multiple candidate paths, and use it to construct a natural class of multi-path block verification generalizations. While computing the optimal algorithm in this class is not tractable, by considering a stricter class of greedy algorithms, we can formulate an efficient method called greedy multi-path block verification (GBV). Empirically, GBV can improve block efficiency by over 30% and reduce decoding walltimes by over 15% relative to BV. On Llama-3 70B, GBV can improve the end-to-end decoding throughput over SOTA multi-path verification methods by more than 15%.

Fake base stations (FBSes) pose a significant security threat by impersonating legitimate base stations (BSes). Though efforts have been made to defeat this threat, up to this day, the presence of FBSes and the multi-step attacks (MSAs) stemming from them can lead to unauthorized surveillance, interception of sensitive information, and disruption of network services. Therefore, detecting these malicious entities is crucial to ensure the security and reliability of cellular networks. Traditional detection methods often rely on additional hardware, rules, signal scanning, changing protocol specifications, or cryptographic mechanisms that have limitations and incur huge infrastructure costs. In this paper, we develop FBSDetector-an effective and efficient detection solution that can reliably detect FBSes and MSAs from layer-3 network traces using machine learning (ML) at the user equipment (UE) side. To develop FBSDetector, we create FBSAD and MSAD, the first-ever high-quality and large-scale datasets incorporating instances of FBSes and 21 MSAs. These datasets capture the network traces in different real-world cellular network scenarios (including mobility and different attacker capabilities) incorporating legitimate BSes and FBSes. Our novel ML framework, specifically designed to detect FBSes in a multi-level approach for packet classification using stateful LSTM with attention and trace level classification and MSAs using graph learning, can effectively detect FBSes with an accuracy of 96% and a false positive rate of 2.96%, and recognize MSAs with an accuracy of 86% and a false positive rate of 3.28%. We deploy FBSDetector as a real-world solution to protect end-users through a mobile app and validate it in real-world environments. Compared to the existing heuristic-based solutions that fail to detect FBSes, FBSDetector can detect FBSes in the wild in real-time.

Modern retrieval-augmented generation (RAG) systems convert sensitive content into high-dimensional embeddings and store them in vector databases that treat the resulting numerical artifacts as opaque. Major vector-store products do not provide native controls for embedding integrity, ingestion-time distributional anomaly detection, or cryptographic provenance attestation. We show this opens a class of steganographic exfiltration attacks: an attacker with write access to the ingestion pipeline can hide payload data inside embeddings using simple post-embedding perturbations (noise injection, rotation, scaling, offset, fragmentation, and combinations thereof) while preserving the surface-level retrieval behavior the RAG system exposes to legitimate users. We evaluate these techniques across a synthetic-PII corpus on text-embedding-3-large, four locally hosted open embedding models, a cross-corpus replication on BEIR NFCorpus and a Quora subset (over 26,000 chunks combined), seven vector-store configurations, an adaptive-attacker variant of the detector evaluation, and a paraphrased-query retrieval benchmark. Distribution-shifting perturbations are often caught by simple anomaly detectors; small-angle orthogonal rotation defeats distribution-based detection across every (model, corpus) pair tested. A disjoint-Givens rotation encoder gives a closed-form per-vector capacity ceiling of floor(d/2) * b bits, but real embedding manifolds impose a capacity-detectability trade-off, and the retrieval-preserving operating point sits well below it. We propose VectorPin, a cryptographic provenance protocol that pins each embedding to its source content and producing model via an Ed25519 signature over a canonical byte representation. Any post-embedding modification breaks signature verification. Embedding-level integrity is a deployable, standardizable control that closes this attack class.

Device recognition is vital for security in wireless communication systems, particularly for applications like access control. Radio Frequency Fingerprint Identification (RFFI) offers a non-cryptographic solution by exploiting hardware-induced signal distortions. This paper proposes HyDRA, a Hybrid Dual-mode RF Architecture that integrates an optimized Variational Mode Decomposition (VMD) with a novel architecture based on the fusion of Convolutional Neural Networks (CNNs), Transformers, and Mamba components, designed to support both closed-set and open-set classification tasks. The optimized VMD enhances preprocessing efficiency and classification accuracy by fixing center frequencies and using closed-form solutions. HyDRA employs the Transformer Dynamic Sequence Encoder (TDSE) for global dependency modeling and the Mamba Linear Flow Encoder (MLFE) for linear-complexity processing, adapting to varying conditions. Evaluation on public datasets demonstrates state-of-the-art (SOTA) accuracy in closed-set scenarios and robust performance in our proposed open-set classification method, effectively identifying unauthorized devices. Deployed on NVIDIA Jetson Xavier NX, HyDRA achieves millisecond-level inference speed with low power consumption, providing a practical solution for real-time wireless authentication in real-world environments. The source code is published on https://github.com/Crazy-Bull/HyDRA.

Deep learning shows promising performance in wireless sensing. However, deep wireless sensing (DWS) heavily relies on large datasets. Unfortunately, building comprehensive datasets for DWS is difficult and costly, because wireless data depends on environmental factors and cannot be labeled offline. Despite recent advances in few-shot/cross-domain learning, DWS is still facing data scarcity issues. In this paper, we investigate a distinct perspective of radio data augmentation (RDA) for WiFi sensing and present a data-space solution. Our key insight is that wireless signals inherently exhibit data diversity, contributing more information to be extracted for DWS. We present RFBoost, a simple and effective RDA framework encompassing novel physical data augmentation techniques. We implement RFBoost as a plug-and-play module integrated with existing deep models and evaluate it on multiple datasets. Experimental results demonstrate that RFBoost achieves remarkable average accuracy improvements of 5.4% on existing models without additional data collection or model modifications, and the best-boosted performance outperforms 11 state-of-the-art baseline models without RDA. RFBoost pioneers the study of RDA, an important yet currently underexplored building block for DWS, which we expect to become a standard DWS component of WiFi sensing and beyond. RFBoost is released at https://github.com/aiot-lab/RFBoost.

Fact verification aims to automatically probe the veracity of a claim based on several pieces of evidence. Existing works are always engaging in the accuracy improvement, let alone the explainability, a critical capability of fact verification system. Constructing an explainable fact verification system in a complex multi-hop scenario is consistently impeded by the absence of a relevant high-quality dataset. Previous dataset either suffer from excessive simplification or fail to incorporate essential considerations for explainability. To address this, we present EX-FEVER, a pioneering dataset for multi-hop explainable fact verification. With over 60,000 claims involving 2-hop and 3-hop reasoning, each is created by summarizing and modifying information from hyperlinked Wikipedia documents. Each instance is accompanied by a veracity label and an explanation that outlines the reasoning path supporting the veracity classification. Additionally, we demonstrate a novel baseline system on our EX-FEVER dataset, showcasing document retrieval, explanation generation, and claim verification and observe that existing fact verification models trained on previous datasets struggle to perform well on our dataset. Furthermore, we highlight the potential of utilizing Large Language Models in the fact verification task. We hope our dataset could make a significant contribution by providing ample opportunities to explore the integration of natural language explanations in the domain of fact verification.

We give an overview of recent developments in the modeling of radiowave propagation, based on machine learning algorithms. We identify the input and output specification and the architecture of the model as the main challenges associated with machine learning-driven propagation models. Relevant papers are discussed and categorized based on their approach to each of these challenges. Emphasis is given on presenting the prospects and open problems in this promising and rapidly evolving area.

Natural language messages often contain quasi-identifiers that are weak in isolation but can jointly reveal an individual's private attributes. We call such a jointly revealing set of cues a quasi-evidence group. Existing privacy benchmarks focus on explicit identifiers, attribute inference, or task-driven disclosures, leaving inference from quasi-evidence groups largely unmeasured. In practice, whether exposing such a quasi-evidence group violates privacy also depends on sender-specified disclosure policies. We introduce QuasiLeak-Bench, a benchmark for policy-conditioned quasi-evidence group recovery, which evaluates whether detectors recover complete quasi-evidence groups and flag the disclosures the given policy prohibits. To obtain reliable ground truth at scale, a reverse-construction pipeline first selects weak quasi-identifiers, composes them into quasi-evidence groups verified to jointly reveal a target attribute, and generates documents around this evidence, followed by automated quality control. Experiments show that existing privacy detectors transfer poorly to QuasiLeak-Bench, and locally deployable LLM-based detectors fall far behind proprietary models, mainly because they miss most quasi-evidence groups altogether. However, a 4B model fine-tuned on our training split surpasses the strongest prompted model on held-out documents, showing that the task is learnable.

It is important that consumers and regulators can verify the provenance of large neural models to evaluate their capabilities and risks. We introduce the concept of a "Proof-of-Training-Data": any protocol that allows a model trainer to convince a Verifier of the training data that produced a set of model weights. Such protocols could verify the amount and kind of data and compute used to train the model, including whether it was trained on specific harmful or beneficial data sources. We explore efficient verification strategies for Proof-of-Training-Data that are compatible with most current large-model training procedures. These include a method for the model-trainer to verifiably pre-commit to a random seed used in training, and a method that exploits models' tendency to temporarily overfit to training data in order to detect whether a given data-point was included in training. We show experimentally that our verification procedures can catch a wide variety of attacks, including all known attacks from the Proof-of-Learning literature.

With the growing complexity and dynamics of the mobile communication networks, accurately predicting key system parameters, such as channel state information (CSI), user location, and network traffic, has become essential for a wide range of physical (PHY)-layer and medium access control (MAC)-layer tasks. Although traditional deep learning (DL)-based methods have been widely applied to such prediction tasks, they often struggle to generalize across different scenarios and tasks. In response, we propose a unified foundation model for multi-task prediction in wireless networks that supports diverse prediction intervals. The proposed model enforces univariate decomposition to unify heterogeneous tasks, encodes granularity for interval awareness, and uses a causal Transformer backbone for accurate predictions. Additionally, we introduce a patch masking strategy during training to support arbitrary input lengths. After trained on large-scale datasets, the proposed foundation model demonstrates strong generalization to unseen scenarios and achieves zero-shot performance on new tasks that surpass traditional full-shot baselines.

Fact verification is essential for ensuring the reliability of LLM applications. In this study, we evaluate 12 pre-trained LLMs and one specialized fact-verifier, including frontier LLMs and open-weight reasoning LLMs, using a collection of examples from 14 fact-checking benchmarks. We share three findings intended to guide future development of more robust fact verifiers. First, we highlight the importance of addressing annotation errors and ambiguity in datasets, demonstrating that approximately 16\% of ambiguous or incorrectly labeled data substantially influences model rankings. Neglecting this issue may result in misleading conclusions during comparative evaluations, and we suggest using a systematic pipeline utilizing LLM-as-a-judge to help identify these issues at scale. Second, we discover that frontier LLMs with few-shot in-context examples, often overlooked in previous works, achieve top-tier performance. We therefore recommend future studies include comparisons with these simple yet highly effective baselines. Lastly, despite their effectiveness, frontier LLMs incur substantial costs, motivating the development of small, fine-tuned fact verifiers. We show that these small models still have room for improvement, particularly on instances that require complex reasoning. Encouragingly, we demonstrate that augmenting training with synthetic multi-hop reasoning data significantly enhances their capabilities in such instances. We release our code, model, and dataset at https://github.com/just1nseo/verifying-the-verifiers

Deepfakes generated by modern generative models pose a serious threat to information integrity, digital identity, and public trust. Existing detection methods are largely reactive, attempting to identify manipulations after they occur and often failing to generalize across evolving generation techniques. This motivates the need for proactive mechanisms that secure media authenticity at the time of creation. In this work, we introduce SAiW, a Source-Attributed Invisible watermarking Framework for proactive deepfake defense and media provenance verification. Unlike conventional watermarking methods that treat watermark payloads as generic signals, SAiW formulates watermark embedding as a source-conditioned representation learning problem, where watermark identity encodes the originating source and modulates the embedding process to produce discriminative and traceable signatures. The framework integrates feature-wise linear modulation to inject source identity into the embedding network, enabling scalable multi-source watermark generation. A perceptual guidance module derived from human visual system priors ensures that watermark perturbations remain visually imperceptible while maintaining robustness. In addition, a dual-purpose forensic decoder simultaneously reconstructs the embedded watermark and performs source attribution, providing both automated verification and interpretable forensic evidence. Extensive experiments across multiple deepfake datasets demonstrate that SAiW achieves high perceptual quality while maintaining strong robustness against compression, filtering, noise, geometric transformations, and adversarial perturbations. By binding digital media to its origin through invisible yet verifiable markers, SAiW enables reliable authentication and source attribution, providing a scalable foundation for proactive deepfake defense and trustworthy media provenance.

Access to frontier large language models (LLMs), such as GPT-5 and Gemini-2.5, is often hindered by high pricing, payment barriers, and regional restrictions. These limitations drive the proliferation of shadow APIs, third-party services that claim to provide access to official model services without regional limitations via indirect access. Despite their widespread use, it remains unclear whether shadow APIs deliver outputs consistent with those of the official APIs, raising concerns about the reliability of downstream applications and the validity of research findings that depend on them. In this paper, we present the first systematic audit between official LLM APIs and corresponding shadow APIs. We first identify 17 shadow APIs that have been utilized in 187 academic papers, with the most popular one reaching 5,966 citations and 58,639 GitHub stars by December 6, 2025. Through multidimensional auditing of three representative shadow APIs across utility, safety, and model verification, we uncover both indirect and direct evidence of deception practices in shadow APIs. Specifically, we reveal performance divergence reaching up to 47.21%, significant unpredictability in safety behaviors, and identity verification failures in 45.83% of fingerprint tests. These deceptive practices critically undermine the reproducibility and validity of scientific research, harm the interests of shadow API users, and damage the reputation of official model providers.

Visual fluency in generated video does not imply physical reliability, and a scalar quality score alone is incapable of indicating the obligation a clip violates or the moment it fails. We present VeriPhy, an auditable physical-verification system in which a text-only planner compiles the prompt into typed physical obligations and a statically validated execution plan before any frame is observed. During execution, observations gate and scope only declared calls to frozen low-level experts (e.g., segmentation and tracking, counting, eleven typed physical measurements over the resulting tracks, depth, OCR, and audio-event detection). Each action returns a provenance-carrying evidence record whose payload, when usable, is either a typed measurement or an explicitly tagged learned state. Typed resolvers and fixed composition map usable records to a three-valued state (supported, contradicted, or unknown, surfaced as plausible, implausible, or abstain) with full provenance, so that every verdict is traceable to the evidence that produced it. We anchor evaluation in a 1,500-clip corpus of human-annotated flaw records that localize real generation failures in prompt reference, space, and time. On a 149-clip core carrying 304 such records, VeriPhy accounts for 228, against 164 for a published question-decomposition evaluator given the same clips and the same claims. Recall alone does not separate it from prompting the same backbone monolithically, which reaches 222; what separates them is that each decision retains its evidence record and provenance, making the traces auditable one verdict at a time and usable as the interface through which a critic verdict could be written back into generation.

The open radio access network (O-RAN), with its disaggregated and open architecture, is poised to meet the demands of the next generation of wireless communication. However, to unlock the full potentials of O-RAN, real-time network modeling and optimization are essential. A promising solution for such requirement is the use of network digital twin (NDT). NDT provides a comprehensive view of a network, covering both physical and logical components, including infrastructure, protocols, and algorithms. NDT, as a real-time virtual representation of O-RAN facilitates a variety of operations, such as emulations, test, optimization, monitoring, and analysis of a new configuration in a risk-free environment, without requiring them to be implemented in real network. Such capability enables the vendors and network operators for a faster adoption of new solutions with frequent updates, while ensuring the resiliency of the existing services via planning ahead under various "what-if" scenarios. In this paper, we first describe what exactly NDT means in the context of O-RAN, as well as its key enablers. We then describe the NDT application within the O-RAN in both prior and post-deployment. Finally, we provide two practical uses cases, namely network energy efficiency and traffic steering, where the NDT can be leveraged effectively.

Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative model consists of a two-stage structure that first predicts the state of each link (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder that generates the path losses, delays, and angles of arrival and departure for all its propagation paths. Importantly, minimal prior assumptions are made, enabling the model to capture complex relationships within the data. The methodology is demonstrated for 28GHz air-to-ground channels in an urban environment, with training datasets produced by means of ray tracing.

Reference-free faithfulness metrics verify each atomic claim a model makes against ground truth, and are increasingly used to evaluate grounded generation. We show they share a blind spot: they measure only precision -- are the stated claims supported? -- and therefore reward abstention, since a model can score near-perfect faithfulness by saying almost nothing. We make this measurable using Formula 1 telemetry, a domain where strategic ground truth is derived deterministically and, crucially, completely: for each decision we know the full set of facts that mattered. This completeness -- absent in open-domain faithfulness benchmarks -- lets us measure recall (coverage of the relevant facts) exactly, alongside precision. On a multilingual (EN/ES/PT) benchmark of 7,253 decision instances spanning 150 races, the most precise frontier model covers under half of the relevant facts and ranks last by F1, so requiring coverage reorders the systems; the same effect reappears in a second complete-oracle domain (NOAA weather forecasts). A prompt ablation shows the low coverage is not an under-prompting artifact: explicitly asking models to be thorough does not close the gap. We pair faithfulness with coverage into a single score, validate the metric (controlled perturbation; agreement across a model-free regex extractor and a cross-family LLM extractor, system-level Spearman 1.0), and give a verifier-guided generation method that improves precision and recall without references. We release the benchmark, structured annotations, metric, baselines, and an interactive demo.

Speaker verification systems achieve high accuracy but provide little account of the acoustic evidence behind their judgments. Making these systems inspectable requires exposing interpretable evidence while retaining the richer information on which their decisions depend. We present CoLMbo-SV, a speaker language model that combines strong speaker discrimination with structured, acoustically grounded comparison reports. By connecting a pretrained speaker encoder to a language model and supplying explicit acoustic measurements, CoLMbo-SV makes voice comparisons inspectable without restricting verification to the evidence verbalized in its reports. We additionally introduce VoxReason, paired recordings with measured acoustic properties and comparison reports filtered through numerical and qualitative checks, providing supervision for this combined capability. We also develop an evaluation framework that separates what acoustic information a speaker representation encodes, what influences the verification score, and what the generated report discusses. On VoxCeleb1-O, CoLMbo-SV achieves 0.99\% EER, reducing verification error by approximately 80\% relative to the strongest audio-language baseline fine-tuned on VoxReason, while attaining a numerical-grounding score of 0.82. Our analysis further demonstrates that acoustic correctness and decision relevance are distinct properties of an explanation, exposing a gap that numerical-grounding metrics miss. Together, these contributions substantially advance audio-language speaker verification, bring its accuracy toward that of dedicated speaker encoders while adding checkable acoustic reporting, and establish an empirical framework for connecting natural-language explanations to the decisions they explain.

Massive multiple-input multiple-output (MIMO) communication systems have a huge potential both in terms of data rate and energy efficiency, although channel estimation becomes challenging for a large number of antennas. Using a physical model allows to ease the problem by injecting a priori information based on the physics of propagation. However, such a model rests on simplifying assumptions and requires to know precisely the configuration of the system, which is unrealistic in practice.In this paper we present mpNet, an unfolded neural network specifically designed for massive MIMO channel estimation. It is trained online in an unsupervised way. Moreover, mpNet is computationally efficient and automatically adapts its depth to the signal-to-noise ratio (SNR). The method we propose adds flexibility to physical channel models by allowing a base station (BS) to automatically correct its channel estimation algorithm based on incoming data, without the need for a separate offline training phase.It is applied to realistic millimeter wave channels and shows great performance, achieving a channel estimation error almost as low as one would get with a perfectly calibrated system. It also allows incident detection and automatic correction, making the BS resilient and able to automatically adapt to changes in its environment.

Recent advances in speech spoofing necessitate stronger verification mechanisms in neural speech codecs to ensure authenticity. Current methods embed numerical watermarks before compression and extract them from reconstructed speech for verification, but face limitations such as separate training processes for the watermark and codec, and insufficient cross-modal information integration, leading to reduced watermark imperceptibility, extraction accuracy, and capacity. To address these issues, we propose WMCodec, the first neural speech codec to jointly train compression-reconstruction and watermark embedding-extraction in an end-to-end manner, optimizing both imperceptibility and extractability of the watermark. Furthermore, We design an iterative Attention Imprint Unit (AIU) for deeper feature integration of watermark and speech, reducing the impact of quantization noise on the watermark. Experimental results show WMCodec outperforms AudioSeal with Encodec in most quality metrics for watermark imperceptibility and consistently exceeds both AudioSeal with Encodec and reinforced TraceableSpeech in extraction accuracy of watermark. At bandwidth of 6 kbps with a watermark capacity of 16 bps, WMCodec maintains over 99% extraction accuracy under common attacks, demonstrating strong robustness.

Accurate, low-latency channel modeling is essential for real-time wireless network simulation and digital-twin applications. Traditional modeling methods like ray tracing are however computationally demanding and unsuited to model dynamic conditions. In this paper, we propose AIRMap, a deep-learning framework for ultra-fast radio-map estimation, along with an automated pipeline for creating the largest radio-map dataset to date. AIRMap uses a single-input U-Net autoencoder that processes only a 2D elevation map of terrain and building heights. Trained on 1.2M Boston-area samples and validated across four distinct urban and rural environments with varying terrain and building density, AIRMap predicts path gain with under 4 dB RMSE in 4 ms per inference on an NVIDIA L40S-over 100x faster than GPU-accelerated ray tracing based radio maps. A lightweight calibration using just 20% of field measurements reduces the median error to approximately 5%, significantly outperforming traditional simulators, which exceed 50% error. Integration into the Colosseum emulator and the Sionna SYS platform demonstrate near-zero error in spectral efficiency and block-error rate compared to measurement-based channels. These findings validate AIRMap's potential for scalable, accurate, and real-time radio map estimation in wireless digital twins.

Active Motor Noise Cancellation (AMNC) ships in commercial fused deposition modeling (FDM) 3D printers as a hardware countermeasure against acoustic side-channel attacks that target intellectual property (IP). We present the first empirical evaluation of a deployed AMNC countermeasure, using a public dataset of synchronized acoustic and vibration recordings from two AMNC-equipped Bambu Lab printers across 12 object classes. AMNC fully neutralizes the acoustic channel: classification accuracy is indistinguishable from the 8.33% random baseline. The vibration channel, which AMNC does not target, still leaks. With summary statistics the leak is coarse and amplitude-driven (vibration accuracy approximately 31% pooled, 36-47% within-printer), while the waveform shape carries essentially nothing (frequency-only features at chance). A full-sequence temporal model that ingests the ordered evolution of the print raises accuracy to approximately 61%, and an order-shuffling control (approximately 33%) shows that a substantial component is genuinely sequential and tied to print progression. The leak is device-specific: a classifier trained on one printer transfers near chance to the other. We conclude that AMNC is an acoustic-only defense: vibration remains a partial, geometry-correlated side channel it does not address, but one that does not, on this dataset, support full geometric reconstruction; reconstruction-grade attacks would require the magnetic or power channels AMNC also leaves untouched. We release all code.

Recent advances in generative audio models have enabled high-fidelity environmental sound synthesis, raising serious concerns for audio security. The ESDD 2026 Challenge therefore addresses environmental sound deepfake detection under unseen generators (Track 1) and black-box low-resource detection (Track 2) conditions. We propose EnvSSLAM-FFN, which integrates a frozen SSLAM self-supervised encoder with a lightweight FFN back-end. To effectively capture spoofing artifacts under severe data imbalance, we fuse intermediate SSLAM representations from layers 4-9 and adopt a class-weighted training objective. Experimental results show that the proposed system consistently outperforms the official baselines on both tracks, achieving Test Equal Error Rates (EERs) of 1.20% and 1.05%, respectively.

A speech deepfake detector estimates whether a recording is synthetic, but a forensic analyst also asks which system produced it, whether recordings share a source, and what evidence supports each conclusion. We present VeriSpoof, an audio language model that unifies five tasks with shared weights: deepfake detection, generator attribution (generator, acoustic model and vocoder), recording-condition analysis, synthesized-span localisation, and source verification. Each decision is supported by grounded rationales whose statements can be independently verified. Answers are scored by sentence likelihood, allowing detection and source verification to be thresholded without separate heads. Rationale statements can be checked against waveform measurements, span labels, or generator metadata. Counterfactual examples train decisions to follow the stated evidence. Across the 14 Speech-DF-Arena test sets, VeriSpoof-Plus achieves 2.14% pooled EER, ranking third of 28 systems and first among open-weight systems. VeriSpoof-Base, trained only on official training splits of eight corpora, achieves 4.43% EER, less than half that of the next open-weight detector. With the same weights, VeriSpoof-Plus verifies whether recordings from generators unseen in training share a source at 6.2% EER. Controlled studies show that the audio representation governs detection, the LLM governs recording comparison, and source supervision is necessary for neural-codec fakes. Statement-checkable rationales catch partial fakes missed by one-step answers (99.6% vs. 78.4% on PartialEdit) and determine decisions under edits unseen in training (99.5%). Training updates only 29.7M of 2.85B parameters, fitting a single 24 GB GPU with gradient checkpointing. We release both models, inference code, a demo, and VeriSpoof-Bench, the evaluation suite covering these questions.

The increasing integration of AI agents into cyber-physical systems (CPS) introduces new security risks that extend beyond traditional cyber or physical threat models. Recent advances in generative AI enable deepfake and semantic manipulation attacks that can compromise agent perception, reasoning, and interaction with the physical environment, while emerging protocols such as the Model Context Protocol (MCP) further expand the attack surface through dynamic tool use and cross-domain context sharing. This survey provides a comprehensive review of security threats targeting AI agents in CPS, with a particular focus on environmental interactions, deepfake-driven attacks, and MCP-mediated vulnerabilities. We organize the literature using the SENTINEL framework, a lifecycle-aware methodology that integrates threat characterization, feasibility analysis under CPS constraints, defense selection, and continuous validation. Through an end-to-end case study grounded in a real-world smart grid deployment, we quantitatively illustrate how timing, noise, and false-positive costs constrain deployable defenses, and why detection mechanisms alone are insufficient as decision authorities in safety-critical CPS. The survey highlights the role of provenance- and physics-grounded trust mechanisms and defense-in-depth architectures, and outlines open challenges toward trustworthy AI-enabled CPS.

Existing speech anti-spoofing benchmarks rely on a narrow set of public models, creating a substantial gap from real-world scenarios in which commercial systems employ diverse, often proprietary APIs. To address this issue, we introduce MultiAPI Spoof, a multi-API audio anti-spoofing dataset comprising about 230 hours of synthetic speech generated by 30 distinct APIs, including commercial services, open-source models, and online platforms. Furthermore, we propose Nes2Net-LA, a local-attention enhanced variant of Nes2Net that improves local context modeling and fine-grained spoofing feature extraction. Based on this dataset, we also define the API tracing task, enabling fine-grained attribution of spoofed audio to its generation source. Experiments show that Nes2Net-LA achieves state-of-the-art performance and offers superior robustness, particularly under diverse and unseen spoofing conditions. Code https://github.com/XuepingZhang/MultiAPI-Spoof and dataset https://xuepingzhang.github.io/MultiAPI-Spoof-Dataset/ have been released.

Large language model safeguards decide whether to answer before seeing how an answer will be used. This creates a basic problem for dual-use tasks: the same answer can help an authorized professional or an attacker, while an attacker can imitate a benign request and interaction history. We separate the capability released by the model from the evidence available about downstream use. When that evidence is copyable, we derive the exact worst-case floor on attacker assistance while preserving useful answers. The result yields a safety trilemma: Useful Capability, Reliable Safety, and Open Access cannot coexist. We then show how a trusted credential can complement existing safeguards by adding hard-to-copy information that predicts actual downstream use, and identify the stronger condition needed to eliminate the floor. Evidence from dual-use evaluations, adaptive attacks, and deployed trusted-access programs supports the practical relevance of these conditions.

Generic time-series foundation models transfer poorly to wireless network telemetry whose signals are bursty, zero-inflated, and coupled across protocol layers. We present APEX, a network-native, decoder-only transformer for forecasting enterprise AP telemetry, and evaluate it on DHCP degradation as a representative network task. APEX is pre-trained on 10-channel multivariate telemetry from ~4,500 production wireless networks (~100K AP time series, 34 metrics per AP), and is available as APEX-Large (269M, cloud) and APEX-Edge (10.5M, edge). On a 192-step (4-day) DHCP degradation benchmark, APEX-Large reduces MAE by 18% over the strongest foundation-model baseline (Toto) and 38% over SARIMA, with anomaly-detection F1 = 0.93, while APEX-Edge enables sub-second, privacy-preserving inference on AP-class edge hardware. These results suggest network-native pre-training is a practical foundation for proactive wireless operations.

Directional multi-transmitter localization from sparse received-power observations is difficult because the receiver observes only the source-unresolved aggregate field: multiple directional sources superpose, building blockage fragments their visible regions, and stronger sources can mask weaker ones. We present SymNetPro, which retains the dual-task radio-map reconstruction and localization backbone of SymNet and adds two targeted components. First, a sparse line-of-sight (LOS)-aware attention bias injects obstruction-aware spatial relations into selected token interactions. Second, transmitter-drop augmentation recomposes training scenes after removing one sample-supported transmitter, exposing the model to controlled source-cardinality variation. Experiments on directional ray-traced urban environments show substantially lower OSPA than representative localization baselines under extreme sparse sampling, with consistent gains under measurement noise and increasing transmitter count. A transmitter-specific evidence analysis further shows that remaining misses concentrate in regimes where the target contributes little distinguishable power to the aggregate observation.

Radio frequency fingerprint identification (RFFI) is an emerging device authentication technique that relies on intrinsic hardware characteristics of wireless devices. We designed an RFFI scheme for Long Range (LoRa) systems based on spectrogram and convolutional neural network (CNN). Specifically, we used spectrogram to represent the fine-grained time-frequency characteristics of LoRa signals. In addition, we revealed that the instantaneous carrier frequency offset (CFO) is drifting, which will result in misclassification and significantly compromise the system stability; we demonstrated CFO compensation is an effective mitigation. Finally, we designed a hybrid classifier that can adjust CNN outputs with the estimated CFO. The mean value of CFO remains relatively stable, hence it can be used to rule out CNN predictions whose estimated CFO falls out of the range. We performed experiments in real wireless environments using 20 LoRa devices under test (DUTs) and a Universal Software Radio Peripheral (USRP) N210 receiver. By comparing with the IQ-based and FFT-based RFFI schemes, our spectrogram-based scheme can reach the best classification accuracy, i.e., 97.61% for 20 LoRa DUTs.

We contribute the largest publicly available dataset of naturally occurring factual claims for the purpose of automatic claim verification. It is collected from 26 fact checking websites in English, paired with textual sources and rich metadata, and labelled for veracity by human expert journalists. We present an in-depth analysis of the dataset, highlighting characteristics and challenges. Further, we present results for automatic veracity prediction, both with established baselines and with a novel method for joint ranking of evidence pages and predicting veracity that outperforms all baselines. Significant performance increases are achieved by encoding evidence, and by modelling metadata. Our best-performing model achieves a Macro F1 of 49.2%, showing that this is a challenging testbed for claim veracity prediction.

Verifying the authenticity of satellite imagery has become increasingly critical given advances in generative artificial intelligence. Highly realistic synthetic imagery produced for malicious purposes (deepfakes) can have major consequences in the remote sensing domain, where this data is a fundamental source of information for science applications, planning, logistics, and monitoring. The remote sensing community lacks high-quality, fine-grained manipulation datasets suitable for training and evaluating detection and image forensics algorithms. Existing datasets are lacking and those that do exist either provide no ground truth masks for evaluating manipulation localization, or consist of entire images generated by GANs or diffusion models, which are inadequate for measuring localization performance. To address this gap, we describe a preliminary dataset construction process and prototype benchmark dataset for satellite image manipulation detection and localization. The dataset contains 60 images total, with 30 images carefully manipulated using three manipulation types including copy-paste splicing and diffusion model inpainting, and 30 authentic images. Each image is accompanied by a ground-truth mask and acquisition metadata, enabling both pixel-level localization metrics, image metadata studies, and analyses of how manipulation detection performance relates to image collection parameters. We describe the dataset construction process and present this initial release to support further research in image forensics and geospatial deepfake detection. The prototype dataset can be downloaded at https://huggingface.co/datasets/geodf/fmow-fake-small.

Although Maxwell discovered the physical laws of electromagnetic waves 160 years ago, how to precisely model the propagation of an RF signal in an electrically large and complex environment remains a long-standing problem. The difficulty is in the complex interactions between the RF signal and the obstacles (e.g., reflection, diffraction, etc.). Inspired by the great success of using a neural network to describe the optical field in computer vision, we propose a neural radio-frequency radiance field, NeRF^2, which represents a continuous volumetric scene function that makes sense of an RF signal's propagation. Particularly, after training with a few signal measurements, NeRF^2 can tell how/what signal is received at any position when it knows the position of a transmitter. As a physical-layer neural network, NeRF^2 can take advantage of the learned statistic model plus the physical model of ray tracing to generate a synthetic dataset that meets the training demands of application-layer artificial neural networks (ANNs). Thus, we can boost the performance of ANNs by the proposed turbo-learning, which mixes the true and synthetic datasets to intensify the training. Our experiment results show that turbo-learning can enhance performance with an approximate 50% increase. We also demonstrate the power of NeRF^2 in the field of indoor localization and 5G MIMO.

Model extraction is a growing concern for the security of AI systems. For deep neural network models, the architecture is the most important information an adversary aims to recover. Being a sequence of repeated computation blocks, neural network models deployed on edge-devices will generate distinctive side-channel leakages. The latter can be exploited to extract critical information when targeted platforms are physically accessible. By combining theoretical knowledge about deep learning practices and analysis of a widespread implementation library (ARM CMSIS-NN), our purpose is to answer this critical question: how far can we extract architecture information by simply examining an EM side-channel trace? For the first time, we propose an extraction methodology for traditional MLP and CNN models running on a high-end 32-bit microcontroller (Cortex-M7) that relies only on simple pattern recognition analysis. Despite few challenging cases, we claim that, contrary to parameters extraction, the complexity of the attack is relatively low and we highlight the urgent need for practicable protections that could fit the strong memory and latency requirements of such platforms.

The convergence of Information Technology and Operational Technology has exposed Industrial Control Systems (ICS) to multi-stage cyberattacks that traverse software, network, and physical process layers simultaneously. Although Provenance-based Intrusion Detection Systems (PIDS) are effective in Information Technology (IT) environments, their applicability to Industrial Cyber-Physical Systems (CPS) remains largely unexplored because of the absence of datasets that jointly capture host-level causal behavior, industrial network semantics, and physical process state. To address this gap, we design an open-source, Hardware-in-the-Loop (HIL) CPS testbed that replicates an industrial chemical reactor control architecture across the Purdue model layers. Using this testbed, we propose ProvICS, a multimodal provenance dataset purpose-built for CPS intrusion detection, which synchronously captures four streams: whole-system provenance graphs from the supervisory host and the resource-constrained PLC, decoded Modbus deep-packet inspection records, and physical process telemetry. The collection comprises a 48-hour benign phase and a 22-hour attack phase across four campaigns covering 20 ICS ATT&CK techniques over 32 attack events, ranging from reconnaissance to physical process manipulation. Comparative analysis shows that ProvICS is among the few existing ICS/CPS benchmarks with multi-host kernel-level provenance, real PLC hardware-in-the-loop execution, decoded Modbus traffic, physical process-state measurements, and auxiliary raw PCAP traces in a time-synchronized collection. Baseline detection further confirms that cross-modal fusion can detect all 32 labeled attack events (F1 = 0.913, false-positive rate (FPR) = 1.40%), demonstrating the dataset's ability to expose complementary attack signals across modalities and addressing a gap not covered by prior benchmarks.

A key research area in deepfake speech detection is source tracing - determining the origin of synthesised utterances. The approaches may involve identifying the acoustic model (AM), vocoder model (VM), or other generation-specific parameters. However, progress is limited by the lack of a dedicated, systematically curated dataset. To address this, we introduce STOPA, a systematically varied and metadata-rich dataset for deepfake speech source tracing, covering 8 AMs, 6 VMs, and diverse parameter settings across 700k samples from 13 distinct synthesisers. Unlike existing datasets, which often feature limited variation or sparse metadata, STOPA provides a systematically controlled framework covering a broader range of generative factors, such as the choice of the vocoder model, acoustic model, or pretrained weights, ensuring higher attribution reliability. This control improves attribution accuracy, aiding forensic analysis, deepfake detection, and generative model transparency.

Graph-based learning has emerged as a transformative approach for modeling complex relationships across diverse domains, yet its potential in wireless security remains largely unexplored. In this work, we introduce the first application of graph-based learning for jamming source localization, addressing the imminent threat of jamming attacks in wireless networks. Unlike geometric optimization techniques that struggle under environmental uncertainties and dense interference, we reformulate localization as an inductive graph regression task. Our approach integrates structured node representations that encode local and global signal aggregation, ensuring spatial coherence and adaptive signal fusion. To enhance robustness, we incorporate an attention-based graph neural network that adaptively refines neighborhood influence and introduces a confidence-guided estimation mechanism that dynamically balances learned predictions with domain-informed priors. We evaluate our approach under complex radio frequency environments with varying sampling densities and signal propagation conditions, conducting comprehensive ablation studies on graph construction, feature selection, and pooling strategies. Results demonstrate that our novel graph-based learning framework significantly outperforms established localization baselines, particularly in challenging scenarios with sparse and obfuscated signal information. Code is available at [https://github.com/daniaherzalla/gnn-jamming-source-localization](https://github.com/daniaherzalla/gnn-jamming-source-localization).

Foundation models succeed when they learn in the native structure of a modality, whether morphology-respecting tokens in language or pixels in vision. Wireless packet traces deserve the same treatment: meaning emerges from layered headers, typed fields, timing gaps, and cross-packet state machines, not flat strings. We present Plume (Protocol Language Understanding Model for Exchanges), a compact 140M-parameter foundation model for 802.11 traces that learns from structured PDML dissections. A protocol-aware tokenizer splits along the dissector field tree, emits gap tokens for timing, and normalizes identifiers, yielding 6.2x shorter sequences than BPE with higher per token information density. Trained on a curated corpus, Plume achieves 74-97% next-packet token accuracy across five real-world failure categories and AUROC >= 0.99 for zero-shot anomaly detection. On the same prediction task, frontier LLMs (Claude Opus 4.6, GPT-5.4) score comparably despite receiving identical protocol context, yet Plume does so with > 600x fewer parameters, fitting on a single GPU at effectively zero marginal cost vs. cloud API pricing, enabling on-prem, privacy-preserving root cause analysis.

Generative models can synthesize highly realistic content, so-called deepfakes, that are already being misused at scale to undermine digital media authenticity. Current deepfake detection methods are unreliable for two reasons: (i) distinguishing inauthentic content post-hoc is often impossible (e.g., with memorized samples), leading to an unbounded false positive rate (FPR); and (ii) detection lacks robustness, as adversaries can adapt to known detectors with near-perfect accuracy using minimal computational resources. To address these limitations, we propose a resynthesis framework to determine if a sample is authentic or if its authenticity can be plausibly denied. We make two key contributions focusing on the high-precision, low-recall setting against efficient (i.e., compute-restricted) adversaries. First, we demonstrate that our calibrated resynthesis method is the most reliable approach for verifying authentic samples while maintaining controllable, low FPRs. Second, we show that our method achieves adversarial robustness against efficient adversaries, whereas prior methods are easily evaded under identical compute budgets. Our approach supports multiple modalities and leverages state-of-the-art inversion techniques.

In mobile telecommunications, alarms act as early warning signals. They are triggered when a cell, the basic unit of radio coverage, shuts down or behaves abnormally. This signals a degradation in service quality, which directly affects the customer experience. To fix the issue, operators rely on preset thresholds to decide when an engineer should be sent out. In practice, these thresholds are set manually and remain fixed regardless of the time of day, traffic levels, or overall network conditions. This often leads to serious faults slipping through during busy hours, while minor issues can cause unnecessary callouts when the network is quiet. This paper presents a machine learning framework that automatically predicts four alarm thresholds, audit window duration, inactive time limit, total fluctuation count, and per hour fluctuation limit, from live network behavior. Since no ground truth labels exist for thresholds, we introduce a percentile guided label derivation strategy and evaluate four models on an anonymized dataset of 10,648 cells across three vendors and nine regions from a real 4G network, comprising a Gradient Boosted Trees baseline, a CNN-BiLSTM with attention, the proposed PCTN, and an iTransformer. PCTN performs the best overall with respect to three of the four targets, outperforming a state-of-the-art iTransformer while using 83 percent fewer parameters. Its mixed output heads and dynamic alpha mechanism produce thresholds that are both accurate and interpretable, allowing operators to inspect and adjust the learned policy without retraining. All comparisons are statistically significant at p < 0.001. The framework undergoes daily retraining using new data, which enables the thresholds to constantly adjust to changes in the network.

Environment-aware 6G wireless networks demand the deep integration of multimodal and wireless data. However, most existing datasets are confined to 2D terrestrial far-field scenarios, lacking the 3D spatial context and near-field characteristics crucial for low-altitude extremely large-scale multiple-input multiple-output (XL-MIMO) systems. To bridge this gap, this letter introduces Multimodal-NF, a large-scale dataset and specialized generation framework. Operating in the upper midband, it synchronizes high-fidelity near-field channel state information (CSI) and precise wireless labels (e.g., Top-5 beam indices, LoS/NLoS) with comprehensive sensory modalities (RGB images, LiDAR point clouds, and GPS). Crucially, these multimodal priors provide spatial semantics that help reduce the near-field search space and thereby lower the overhead of wireless sensing and communication tasks. Finally, we validate the dataset through representative case studies, demonstrating its utility and effectiveness. The open-source generator and dataset are available at https://lmyxxn.github.io/6GXLMIMODatasets/.

In this article, physical layer security (PLS) in an intelligent reflecting surface (IRS) assisted multiple-input multiple-output multiple antenna eavesdropper (MIMOME) system is studied. In particular, we consider a practical scenario without instantaneous channel state information (CSI) of the eavesdropper and assume that the eavesdropping channel is a Rayleigh channel. To reduce the complexity of currently available IRS-assisted PLS schemes, we propose a low-complexity deep learning (DL) based approach to design transmitter beamforming and IRS jointly, where the precoding vector and phase shift matrix are designed to minimize the secrecy outage probability. Simulation results demonstrate that the proposed DL-based approach can achieve a similar performance of that with conventional alternating optimization (AO) algorithms for a significant reduction in the computational complexity.