Daily Papers

Hallucinations, outputs that sound plausible but are factually incorrect, remain an open challenge for deployed LLMs. In code generation, models frequently hallucinate non-existent software packages, recommending imports and installation commands for fictional libraries. This creates a critical supply-chain vulnerability: an attacker can proactively register such packages on public registries with malicious payloads that are subsequently installed and executed by developers or autonomous agents, a class of package confusion attack known as slopsquatting. Once a model is deployed, mitigating this failure mode is difficult: full retraining is costly, and existing approaches either cause severe degradation of model utility or rely on a pre-specified forget-set, an assumption that does not apply to the unbounded space of hallucinations. To address this problem, we present Adaptive Unlearning (AU), a post-deployment framework that surgically suppresses hallucinations while preserving general model utility. AU introduces a hybrid token-level objective that simultaneously reinforces valid outputs and suppresses hallucinated ones. Combined with an adaptive discovery loop that continuously surfaces new hallucination-inducing contexts without human supervision, AU enables generalization to unseen prompts and hallucinations. We demonstrate that AU reduces package hallucination rates by 81%, corresponding to a substantial reduction in slopsquatting attack surface, while maintaining performance on standard coding benchmarks. Our analysis shows that distributional changes are concentrated on package-related generations, leaving general coding behavior largely unaffected and confirming that AU's effect is isolated to the targeted distribution. AU operates entirely on model-generated data, requires no human annotation, and generalizes across domains.

Large Language Models (LLMs) are increasingly used in healthcare, yet ensuring their safety and trustworthiness remains a barrier to deployment. Conversational medical assistants must avoid unsafe compliance without over-refusing benign queries. We present an iterative post-deployment alignment framework that applies Kahneman-Tversky Optimization (KTO) and Direct Preference Optimization (DPO) to refine models against domain-specific safety signals. Using the CARES-18K benchmark for adversarial robustness, we evaluate four LLMs (Llama-3B/8B, Meditron-8B, Mistral-7B) across multiple cycles. Our results show up to 42% improvement in safety-related metrics for harmful query detection, alongside interesting trade-offs against erroneous refusals, thereby exposing architecture-dependent calibration biases. We also perform ablation studies to identify when self-evaluation is reliable and when external or finetuned judges are necessary to maximize performance gains. Our findings underscore the importance of adopting best practices that balance patient safety, user trust, and clinical utility in the design of conversational medical assistants.

Medical agent systems are increasingly expected to support interactive clinical decision making rather than only static question answering. In such settings, effective agents must reuse prior experience across evolving cases, yet existing memory mechanisms often retain raw historical traces that are redundant, noisy, and difficult to govern. More importantly, they rarely distinguish which memories are truly useful for future reasoning. This limits their ability to accumulate compact and reliable experience for long-horizon clinical reasoning. To close this gap, we propose SkeMex, a post-deployment self-evolution framework that improves medical agents through a skill-based memory without updating model weights. SkeMex distills informative interaction trajectories into structured skills that encode reusable procedural knowledge, and organizes them into a multi-branch repository spanning general, task-specific, and action-level experience. To determine which memories should be reused and retained, SkeMex estimates context-dependent utility from environment feedback and uses it to guide value-aware retrieval and repository governance. A closed-loop ``Read--Write--Assess--Govern" lifecycle further supports continual evolution by writing new skills, updating utilities, promoting useful memories, and removing harmful entries. Experiments across diverse clinical tasks show that SkeMex consistently outperforms representative memory-based agents in both offline and online settings. It also generalizes across model backbones and supports transferable skill memory. All data and code will be released publicly.

Steering intermediate representations has emerged as a powerful strategy for controlling generative models, particularly in post-deployment alignment and safety settings. However, despite its empirical success, it currently lacks a comprehensive theoretical framework. In this paper, we bridge this gap by formalizing the theory of concept steering. First, we establish a link between steering and affine concept erasure, proving that the standard approach for removing unwanted behaviors is a special case of LEACE (a closed-form method for affine erasure). Next, we formulate a principled theoretical framework for concept switching, LEACE-Switch, and characterize the assumptions under which it provides an optimal affine solution. Building on this analysis, we then introduce MidSteer (Minimal Disturbance concept Steering), a more general affine framework for concept manipulation that relaxes these assumptions and enables directed, minimal-disturbance transformations. We demonstrate that MidSteer performs favorably across a range of tasks, modalities, and architectures, including vision diffusion models and large language models.

With the growing adoption of Large Language Models (LLMs) in automating complex, multi-agent workflows, organizations face mounting risks from errors, emergent behaviors, and systemic failures that current evaluation methods fail to capture. We present AgentCompass, the first evaluation framework designed specifically for post-deployment monitoring and debugging of agentic workflows. AgentCompass models the reasoning process of expert debuggers through a structured, multi-stage analytical pipeline: error identification and categorization, thematic clustering, quantitative scoring, and strategic summarization. The framework is further enhanced with a dual memory system-episodic and semantic-that enables continual learning across executions. Through collaborations with design partners, we demonstrate the framework's practical utility on real-world deployments, before establishing its efficacy against the publicly available TRAIL benchmark. AgentCompass achieves state-of-the-art results on key metrics, while uncovering critical issues missed in human annotations, underscoring its role as a robust, developer-centric tool for reliable monitoring and improvement of agentic systems in production.

This report examines the fine-tuning of Large Language Models (LLMs), integrating theoretical insights with practical applications. It outlines the historical evolution of LLMs from traditional Natural Language Processing (NLP) models to their pivotal role in AI. A comparison of fine-tuning methodologies, including supervised, unsupervised, and instruction-based approaches, highlights their applicability to different tasks. The report introduces a structured seven-stage pipeline for fine-tuning LLMs, spanning data preparation, model initialization, hyperparameter tuning, and model deployment. Emphasis is placed on managing imbalanced datasets and optimization techniques. Parameter-efficient methods like Low-Rank Adaptation (LoRA) and Half Fine-Tuning are explored for balancing computational efficiency with performance. Advanced techniques such as memory fine-tuning, Mixture of Experts (MoE), and Mixture of Agents (MoA) are discussed for leveraging specialized networks and multi-agent collaboration. The report also examines novel approaches like Proximal Policy Optimization (PPO) and Direct Preference Optimization (DPO), which align LLMs with human preferences, alongside pruning and routing optimizations to improve efficiency. Further sections cover validation frameworks, post-deployment monitoring, and inference optimization, with attention to deploying LLMs on distributed and cloud-based platforms. Emerging areas such as multimodal LLMs, fine-tuning for audio and speech, and challenges related to scalability, privacy, and accountability are also addressed. This report offers actionable insights for researchers and practitioners navigating LLM fine-tuning in an evolving landscape.

Vision-Language-Action (VLA) models exhibit remarkable action generation for embodied intelligence, but their heavy compute make deployment on edge platforms impractical. Aggressive, sub-4-bit weight quantization is the natural solution, yet existing post-training quantization (PTQ) methods suffer severe performance degradation in this regime. To address this, we introduce ActQuant, an action-guided mixed-precision PTQ framework that operates in two stages: (1) an inter-tensor bit allocator that assigns each weight matrix a single bit-width based on how much it contributes to predicting the agent's actions; (2) an intra-tensor scale optimizer tunes per-block quantization scales using action-aware curvature, so that dynamic range is concentrated on the weights most influential for control. To deliver the on-device benefits of our aggressive quantization, we further introduce OmniModel.cpp, an agentic conversion pipeline that ports architectures into a native C/C++ runtime with efficient low-bit kernels. We evaluate ActQuant both in simulation and on a real-world 6-DoF UR3 arm, with all models deployed through OmniModel.cpp. On the LIBERO benchmark, ActQuant is the only method that operates at or below 3 bits-per-weight, retaining 95.0% on OpenVLA-OFT and 94.8% on π_{0.5}. Pushed further, ActQuant reaches 2.5 bpw at 90.1% on OpenVLA-OFT, compressing the backbone from 14.3 GB to 2.7 GB (5.3times). On the physical UR3 arm, π_{0.5} quantized with ActQuant retains the baseline's success rate while reducing the memory footprint by 2.5times.

Huawei's openPangu-Embedded-1B and openPangu-Embedded-7B are variants of the openPangu large language model, designed for efficient deployment on Ascend NPUs. The 7B variant supports three distinct Chain-of-Thought (CoT) reasoning paradigms, namely slow_think, auto_think, and no_think, while the 1B variant operates exclusively in the no_think mode, which employs condensed reasoning for higher efficiency. Although CoT reasoning enhances capability, the generation of extended reasoning traces introduces substantial memory and latency overheads, posing challenges for practical deployment on Ascend NPUs. This paper addresses these computational constraints by leveraging low-bit quantization, which transforms FP16 computations into more efficient integer arithmetic. We introduce a unified low-bit inference framework, supporting INT8 (W8A8) and W4A8 quantization, specifically optimized for openPangu-Embedded models on the Atlas A2. Our comprehensive evaluation on code generation benchmarks (HumanEval and MBPP) demonstrates the efficacy of this approach. INT8 quantization consistently preserves over 90\% of the FP16 baseline accuracy and achieves a 1.5x prefill speedup on the Atlas A2. Furthermore, W4A8 quantization significantly reduces memory consumption, albeit with a moderate trade-off in accuracy. These findings collectively indicate that low-bit quantization effectively facilitates efficient CoT reasoning on Ascend NPUs, maintaining high model fidelity.

State Space Models (SSMs) are emerging as a compelling alternative to Transformers because of their consistent memory usage and high performance. Despite this, scaling up SSMs on cloud services or limited-resource devices is challenging due to their storage requirements and computational power. To overcome this, quantizing SSMs with low bit-width data formats can reduce model size and benefit from hardware acceleration. As SSMs are prone to quantization-induced errors, recent efforts have focused on optimizing a particular model or bit-width for efficiency without sacrificing performance. However, distinct bit-width configurations are essential for different scenarios, like W4A8 for boosting large-batch decoding speed, and W4A16 for enhancing generation speed in short prompt applications for a single user. To this end, we present Quamba2, compatible with W8A8, W4A8, and W4A16 for both Mamba1 and Mamba2 backbones, addressing the growing demand for SSM deployment on various platforms. Based on the channel order preserving and activation persistence of SSMs, we propose an offline approach to quantize inputs of a linear recurrence in 8-bit by sorting and clustering for input x, combined with a per-state-group quantization for input-dependent parameters B and C. To ensure compute-invariance in the SSM output, we rearrange weights offline according to the clustering sequence. The experiments show that Quamba2-8B outperforms several state-of-the-art SSM quantization methods and delivers 1.3times and 3times speed-ups in the pre-filling and generation stages, respectively, while offering 4times memory reduction with only a 1.6% average accuracy drop. The evaluation on MMLU shows the generalizability and robustness of our framework. The code and quantized models will be released at: https://github.com/enyac-group/Quamba.

While large-scale video diffusion models have demonstrated impressive capabilities in generating high-resolution and semantically rich content, a significant gap remains between their pretraining performance and real-world deployment requirements due to critical issues such as prompt sensitivity, temporal inconsistency, and prohibitive inference costs. To bridge this gap, we propose a comprehensive post-training framework that systematically aligns pretrained models with user intentions through four synergistic stages: we first employ Supervised Fine-Tuning (SFT) to transform the base model into a stable instruction-following policy, followed by a Reinforcement Learning from Human Feedback (RLHF) stage that utilizes a novel Group Relative Policy Optimization (GRPO) method tailored for video diffusion to enhance perceptual quality and temporal coherence; subsequently, we integrate Prompt Enhancement via a specialized language model to refine user inputs, and finally address system efficiency through Inference Optimization. Together, these components provide a systematic approach to improving visual quality, temporal coherence, and instruction following, while preserving the controllability learned during pretraining. The result is a practical blueprint for building scalable post-training pipelines that are stable, adaptable, and effective in real-world deployment. Extensive experiments demonstrate that this unified pipeline effectively mitigates common artifacts and significantly improves controllability and visual aesthetics while adhering to strict sampling cost constraints.

Low-resource deployment constraints have made model quantization essential for deploying neural networks while preserving performance. Meanwhile, model merging has become an increasingly practical low-resource strategy for integrating multiple task- or domain-specialized experts into a single model without joint training or multi-model serving. Together, quantization and model merging enable an efficient low-resource deployment pipeline by integrating multiple experts into one low-bit model. We formulate this setting as Post-Merge Quantization (PMQ). We show that directly applying post-training quantization (PTQ) to a merged model is unreliable because two distinct deviations are coupled: the quantization deviation introduced by low-bit reconstruction and the expert-relative merging deviation inherited from model merging. To mitigate these deviations, we propose E-PMQ, an expert-guided PMQ framework that uses source expert weights to provide expert- guided output targets during layer-wise calibration, together with merged-weight anchoring to stabilize the calibration and preserve the integrated behavior of the merged model. On CLIP-ViT-B/32 eight-task merging, E-PMQ improves 4-bit GPTQ from 65.0% to 73.6% under Task Arithmetic and from 69.1% to 74.8% under TIES-Merging. On harder settings, E-PMQ improves GPTQ from 34.8% to 76.7% on 20-task CLIP-ViT-L/14 and from 78.26% to 83.34% on FLAN-T5- base GLUE. These results demonstrate that E-PMQ enables effective post-merge quantization and low-bit deployment.

Post-Training Quantization (PTQ) is a critical strategy for efficient Large Language Models (LLMs) deployment. However, existing scaling laws primarily focus on general performance, overlooking crucial fine-grained factors and how quantization differentially impacts diverse knowledge capabilities. To address this, we establish Task-Stratified Knowledge Scaling Laws. By stratifying capabilities into memorization, application, and reasoning, we develop a framework that unifies model size, bit-width, and fine-grained factors: group size and calibration set size. Validated on 293 diverse PTQ configurations, our framework demonstrates strong fit and cross-architecture consistency. It reveals distinct sensitivities across knowledge capabilities: reasoning is precision-critical, application is scale-responsive, and memorization is calibration-sensitive. We highlight that in low-bit scenarios, optimizing these fine-grained factors is essential for preventing performance collapse. These findings provide an empirically-backed foundation for designing knowledge-aware quantization strategies.

Vision-language-action (VLA) models unify perception, language, and control for embodied agents but face significant challenges in practical deployment due to rapidly increasing compute and memory demands, especially as models scale to longer horizons and larger backbones. To address these bottlenecks, we introduce QuantVLA, a training-free post-training quantization (PTQ) framework that, to our knowledge, is the first PTQ approach for VLA systems and the first to successfully quantize a diffusion transformer (DiT) action head. QuantVLA incorporates three scale-calibrated components: (1) a selective quantization layout that integerizes all linear layers in both the language backbone and the DiT while keeping attention projections in floating point to preserve the original operator schedule; (2) attention temperature matching, a lightweight per-head scaling mechanism that stabilizes attention logits and is folded into the dequantization scales at inference; and (3) output head balancing, a per-layer residual interface calibration that mitigates post-projection energy drift. The framework requires no additional training, uses only a small unlabeled calibration buffer, and supports integer kernels for low-bit weights and activations while leaving the architecture unchanged. Across representative VLA models on LIBERO, QuantVLA exceeds the task success rates of full-precision baselines, achieves about 70% relative memory savings on the quantized components, and delivers a 1.22x speedup in end-to-end inference latency, providing a practical pathway toward scalable low-bit embodied intelligence under strict compute, memory, and power constraints.

Post-training quantization (PTQ) of large language models (LLMs) to extremely low bit-widths remains challenging due to the fundamental trade-off between computational efficiency and model expressiveness. While existing ultra-low-bit PTQ methods rely on binary approximations or complex compensation mechanisms, they suffer from either limited representational capacity or computational overhead that undermines their efficiency gains. We introduce PTQ to Trit-Planes (PTQTP), the first ternary-weight PTQ framework that decomposes weight matrices into structured ternary {-1, 0, 1} trit-planes using 2x1.58-bit representation. PTQTP achieves multiplication-free inference, identical to 1-bit quantization, while maintaining superior expressiveness through its novel structured decomposition. Our approach provides: (1) a theoretically grounded progressive approximation algorithm ensuring global weight consistency; (2) model-agnostic deployment across diverse modern LLMs without architectural modifications; and (3) uniform ternary operations that eliminate the need for mixed-precision or compensation schemes. Comprehensive experiments across LLaMA3.x and Qwen3 model families (0.6B-70B parameters) demonstrate that PTQTP significantly outperforms existing low-bit PTQ methods, achieving 82.4% mathematical reasoning retention versus 0% for competing approaches. PTQTP approaches and sometimes surpasses 1.58-bit quantization-aware training performance while requiring only single-hour quantization compared to 10-14 GPU days for training-based methods. These results establish PTQTP as a practical solution for efficient LLM deployment in resource-constrained environments.

Large language models with billions of parameters are often over-provisioned: many layers contribute little unique information yet dominate the memory and energy footprint during inference. We present LieQ, a metric-driven post-training quantization framework that addresses the critical challenge of maintaining accuracy in sub-7B models under extreme low-bit compression. Our method introduces three complementary layer-wise diagnostics-Perplexity Drop, Representational Compactness, and Top-k Energy Gain -that reveal a canonical division of labour across layers, enabling automatic bit-width allocation without gradient updates. Unlike existing approaches that suffer severe accuracy degradation at 2-3 bits precision, LieQ achieves state-of-the-art compression-accuracy trade-offs: on Qwen3-4B, it recovers 95.9% of FP16 baseline performance at 2.05-bit quantization, outperforming GPTQ by 19.7% and AWQ by 18.1% on average across seven zero-shot reasoning tasks. Applied to LLaMA3.2-3B, LieQ maintains 98.2% of baseline accuracy at 2.07-bit precision while enabling 4x memory reduction, establishing new paradigms for deploying small language models on resource-constrained edge devices.

Recently, considerable efforts have been directed towards compressing Large Language Models (LLMs), which showcase groundbreaking capabilities across diverse applications but entail significant deployment costs due to their large sizes. Meanwhile, much less attention has been given to mitigating the costs associated with deploying multiple LLMs of varying sizes despite its practical significance. Thus, this paper introduces any-precision LLM, extending the concept of any-precision DNN to LLMs. Addressing challenges in any-precision LLM, we propose a lightweight method for any-precision quantization of LLMs, leveraging a post-training quantization framework, and develop a specialized software engine for its efficient serving. As a result, our solution significantly reduces the high costs of deploying multiple, different-sized LLMs by overlaying LLMs quantized to varying bit-widths, such as 3, 4, ..., n bits, into a memory footprint comparable to a single n-bit LLM. All the supported LLMs with varying bit-widths demonstrate state-of-the-art model quality and inference throughput, proving itself to be a compelling option for deployment of multiple, different-sized LLMs. The source code will be publicly available soon.

Deploying large language model (LLM) models on mobile platforms faces significant challenges due to the limited memory and shared computational resources of the device. Resource availability may be an issue as it is directly impacted by the current device workload, adding to the uncertainty of model deployment. We introduce UniQL, a unified post-training quantization and low-rank compression framework with on-device configurable pruning rates for edge LLMs. UniQL is a general framework that integrates quantization and low-rank compression for Transformers, State Space Models (SSMs), and hybrid models to support diverse edge applications. In our proposed joint framework, we introduce an efficient structured weight-sorting method that speeds up computation by 20x, quantization-aware singular value decomposition (SVD) to minimize quantization errors, state-aware weight sorting for SSMs, and a fused rotary positional embedding (RoPE) kernel for pruned models. Our framework performs weight-sorting, fine-tuning, and quantization in the cloud in a single-pass workflow, while enabling on-device configurable pruning rates up to 35%. Our experiments show that quantized and pruned models achieve a memory reduction of 4x-5.7x and a token-throughput improvement of 2.7x-3.4x, maintaining accuracy within 5% of the original models at 15% pruning across Transformers (Llama3 and Qwen2.5), SSMs (Mamba2), and hybrid models (Nemotron-H and Bamba-v2). The code and quantized models are available at: https://github.com/enyac-group/UniQL.

Reasoning-focused LLMs improve answer quality by generating longer reasoning traces, but the additional tokens dramatically increase serving cost, motivating inference optimization. We extend and apply Puzzle, a post-training neural architecture search (NAS) framework, to gpt-oss-120B to produce gpt-oss-puzzle-88B, a deployment-optimized derivative. Our approach combines heterogeneous MoE expert pruning, selective replacement of full-context attention with window attention, FP8 KV-cache quantization with calibrated scales, and post-training reinforcement learning to recover accuracy, while maintaining low generation length. In terms of per-token speeds, on an 8XH100 node we achieve 1.63X and 1.22X throughput speedups in long-context and short-context settings, respectively. gpt-oss-puzzle-88B also delivers throughput speedups of 2.82X on a single NVIDIA H100 GPU. However, because token counts can change with reasoning effort and model variants, per-token throughput (tok/s) and latency (ms/token) do not necessarily lead to end-to-end speedups: a 2X throughput gain is erased if traces grow 2X. Conversely, throughput gains can be spent on more reasoning tokens to improve accuracy; we therefore advocate request-level efficiency metrics that normalize throughput by tokens generated and trace an accuracy--speed frontier across reasoning efforts. We show that gpt-oss-puzzle-88B improves over gpt-oss-120B along the entire frontier, delivering up to 1.29X higher request-level efficiency. Across various benchmarks, gpt-oss-puzzle-88B matches or slightly exceeds the parent on suite-average accuracy across reasoning efforts, with retention ranging from 100.8% (high) to 108.2% (low), showing that post-training architecture search can substantially reduce inference costs without sacrificing quality.

In this work, we introduce HoloBrain-0, a comprehensive Vision-Language-Action (VLA) framework that bridges the gap between foundation model research and reliable real-world robot deployment. The core of our system is a novel VLA architecture that explicitly incorporates robot embodiment priors, including multi-view camera parameters and kinematic descriptions (URDF), to enhance 3D spatial reasoning and support diverse embodiments. We validate this design through a scalable ``pre-train then post-train" paradigm, achieving state-of-the-art results on simulation benchmarks such as RoboTwin 2.0, LIBERO, and GenieSim, as well as strong results on challenging long-horizon real-world manipulation tasks. Notably, our efficient 0.2B-parameter variant rivals significantly larger baselines, enabling low-latency on-device deployment. To further accelerate research and practical adoption, we fully open-source the entire HoloBrain ecosystem, which includes: (1) powerful pre-trained VLA foundations; (2) post-trained checkpoints for multiple simulation suites and real-world tasks; and (3) RoboOrchard, a full-stack VLA infrastructure for data curation, model training and deployment. Together with standardized data collection protocols, this release provides the community with a complete, reproducible path toward high-performance robotic manipulation.

Training modern LLMs is extremely resource intensive, and customizing them for various deployment scenarios characterized by limited compute and memory resources through repeated training is impractical. In this paper, we introduce Flextron, a network architecture and post-training model optimization framework supporting flexible model deployment. The Flextron architecture utilizes a nested elastic structure to rapidly adapt to specific user-defined latency and accuracy targets during inference with no additional fine-tuning required. It is also input-adaptive, and can automatically route tokens through its sub-networks for improved performance and efficiency. We present a sample-efficient training method and associated routing algorithms for systematically transforming an existing trained LLM into a Flextron model. We evaluate Flextron on the GPT-3 and LLama-2 family of LLMs, and demonstrate superior performance over multiple end-to-end trained variants and other state-of-the-art elastic networks, all with a single pretraining run that consumes a mere 7.63% tokens compared to original pretraining.

Large language models (LLMs) frequently produce false refusals, declining benign requests that contain terms resembling unsafe queries. We address this challenge by introducing two comprehensive benchmarks: the Exaggerated Safety Benchmark (XSB) for single-turn prompts, annotated with "Focus" keywords that identify refusal-inducing triggers, and the Multi-turn Scenario-based Exaggerated Safety Benchmark (MS-XSB), which systematically evaluates refusal calibration in realistic, context-rich dialog settings. Our benchmarks reveal that exaggerated refusals persist across diverse recent LLMs and are especially pronounced in complex, multi-turn scenarios. To mitigate these failures, we leverage post-hoc explanation methods to identify refusal triggers and deploy three lightweight, model-agnostic approaches, ignore-word instructions, prompt rephrasing, and attention steering, at inference time, all without retraining or parameter access. Experiments on four instruction-tuned Llama models demonstrate that these strategies substantially improve compliance on safe prompts while maintaining robust safety protections. Our findings establish a reproducible framework for diagnosing and mitigating exaggerated refusals, highlighting practical pathways to safer and more helpful LLM deployments.

The ``You Only Look Once'' (YOLO) framework has long served as a standard for real-time object detection, though traditional iterations have utilized Non-Maximum Suppression (NMS) post-processing, which introduces specific latency and hyperparameter variables. This paper presents a comprehensive architectural analysis of YOLO26, a model that shifts toward a native end-to-end learning strategy by eliminating NMS. This study examines the core mechanisms driving this framework: the MuSGD optimizer for backbone stabilization, Small-Target-Aware Label Assignment (STAL), and ProgLoss for dynamic supervision. To contextualize its performance, this article reviews exhaustive benchmark data from the COCO val2017 leaderboard. This evaluation provides an objective comparison of YOLO26 across various model scales (Nano to Extra-Large) against both prior CNN lineages and contemporary Transformer-based architectures (e.g., RT-DETR, DEIM, RF-DETR), detailing the observed speed-accuracy trade-offs and parameter requirements without asserting a singular optimal model. Additionally, the analysis covers the framework's unified multi-task capabilities, including the YOLOE-26 open-vocabulary module for promptable detection. Ultimately, this paper serves to document how decoupling representation learning from heuristic post-processing impacts the "Export Gap" and deterministic latency in modern edge-based computer vision deployments.

Java remains central to enterprise software, and many applications outlive their original architecture. Migrating them across frameworks is a behavior-preserving refactoring spanning build configuration, dependency injection, persistence, request handling, and deployment. Existing software-engineering benchmarks cover bug fixing, feature implementation, and language or version modernization, but leave cross-framework refactoring largely unmeasured. We introduce ScarfBench, a benchmark for behavior-preserving cross-framework refactoring of enterprise Java applications. It is built from expert-written implementation triples across Spring, Jakarta EE, and Quarkus: 34 applications (29 focused single-layer, 5 whole) yielding 102 variants (~151K lines across 1946 source and test files) and 204 directed refactoring tasks. Each task gives an agent a working source application and a target framework; the agent must synthesize a target implementation preserving the source behavior. Correctness is evaluated by an application-specific executable oracle: the candidate must compile, deploy in a containerized target runtime, and pass behavioral tests over the application's observable interface. We evaluate five state-of-the-art coding agents on ScarfBench. The strongest achieves only 15.3% aggregate test pass on focused-layer migrations and 12.2% on whole applications, and only one of the 204 tasks yields a fully behaviorally equivalent target. Difficulty is asymmetric across framework directions and architectural layers: Spring<->Quarkus is the most tractable pair, and Jakarta-targeted migrations are hardest. From LLM-as-a-judge and expert adjudication of failed-task traces, we derive a taxonomy of recurring failure categories spanning build, deploy, and test stages. We release the benchmark, harness, and agent traces at https://scarfbench.info.

Higher Degree by Research (HDR) candidates increasingly depend on cloud-provisioned virtual machines and local GPU hardware for their computational experiments, yet a persistent and under-addressed gap exists between having compute resources and using them productively. Cloud and infrastructure teams can provision virtual machines, but the path from a raw VM to a reproducible, GPU-ready research environment remains a significant barrier for researchers who are domain experts, not systems engineers. We identify this gap as a missing adapter layer between cloud provisioning and interactive research work. We present a lightweight, open-source solution built on k3s and Coder that implements this adapter layer and is already in active use in our research workspace environment. Our CI/CD pipeline connects GitHub directly to the local cluster, deploying research projects in under five minutes. We define a concrete metrics framework for evaluating this layer -- covering deployment latency, environment reproducibility, onboarding friction, and resource utilisation -- and establish baselines against which improvements can be measured.

Infrastructure-as-Code (IaC) generation holds significant promise for automating cloud infrastructure provisioning. Recent advances in Large Language Models (LLMs) present a promising opportunity to democratize IaC development by generating deployable infrastructure templates from natural language descriptions. However, current evaluation focuses on syntactic correctness while ignoring deployability, the critical measure of the utility of IaC configuration files. Six state-of-the-art LLMs performed poorly on deployability, achieving only 20.8sim30.2% deployment success rate on the first attempt. In this paper, we construct DPIaC-Eval, the first deployability-centric IaC template benchmark consisting of 153 real-world scenarios cross 58 unique services. Also, we propose an LLM-based deployability-centric framework, dubbed IaCGen, that uses iterative feedback mechanism encompassing format verification, syntax checking, and live deployment stages, thereby closely mirroring the real DevOps workflows. Results show that IaCGen can make 54.6sim91.6% generated IaC templates from all evaluated models deployable in the first 10 iterations. Additionally, human-in-the-loop feedback that provide direct guidance for the deployability errors, can further boost the performance to over 90% passItr@25 on all evaluated LLMs. Furthermore, we explore the trustworthiness of the generated IaC templates on user intent alignment and security compliance. The poor performance (25.2% user requirement coverage and 8.4% security compliance rate) indicates a critical need for continued research in this domain.

The United States Department of Defense (DOD) looks to accelerate the development and deployment of AI capabilities across a wide spectrum of defense applications to maintain strategic advantages. However, many common features of AI algorithms that make them powerful, such as capacity for learning, large-scale data ingestion, and problem-solving, raise new technical, security, and ethical challenges. These challenges may hinder adoption due to uncertainty in development, testing, assurance, processes, and requirements. Trustworthiness through assurance is essential to achieve the expected value from AI. This paper proposes a claims-based framework for risk management and assurance of AI systems that addresses the competing needs for faster deployment, successful adoption, and rigorous evaluation. This framework supports programs across all acquisition pathways provide grounds for sufficient confidence that an AI-enabled system (AIES) meets its intended mission goals without introducing unacceptable risks throughout its lifecycle. The paper's contributions are a framework process for AI assurance, a set of relevant definitions to enable constructive conversations on the topic of AI assurance, and a discussion of important considerations in AI assurance. The framework aims to provide the DOD a robust yet efficient mechanism for swiftly fielding effective AI capabilities without overlooking critical risks or undermining stakeholder trust.

The Model Context Protocol (MCP) has rapidly established itself as a standard interface for enabling LLM-based agents to interact with external tools and services. As MCP servers are increasingly entrusted with security-sensitive operations, understanding their real-world risks has become critical. In practice, due to the absence of large-scale runtime MCP servers, such understanding largely relies on security scanners applied to a small number of cases, yet the reliability of these assessments remains unclear. In this study, we revisit how MCP security is measured. We present MCPZoo, the largest collection of MCP servers for dynamic analysis to date. MCPZoo is constructed through a multi-agent framework for transforming in-the-wild static repositories into dynamic services. The framework emulates how human experts build, diagnose, and iteratively repair deployment and runtime defects by combining environment inference with feedback-driven refinement. To ensure practical interactivity at runtime, the servers are validated via real protocol interactions. As a result, MCPZoo contains 64,611 unique MCP servers (113,927 in total), with more than 37,288 supporting dynamic analysis. Leveraging MCPZoo, we conduct the first ecosystem-scale measurement of MCP servers and the scanners that analyze them. While existing scanners report that 96.89% of servers are risky, we find that these signals are unreliable. In particular, manual validation shows that less than 50% of sampled alerts are true positives, and scanner outputs exhibit clear inconsistency across scanners. Overall, MCPZoo enables large-scale, reproducible measurement of MCP server security and exposes limitations of current scanning practices. We further release a public query interface to support practical risk assessment of MCP servers.

Post-training, which elicits a pretrained Base model into the corresponding Instruct model, is widely considered to be superficial. In this work, we first reinforce this hypothesis by providing novel quantitative evidence from the weight level that the effective rank (eRank) remains negligibly changed. However, this superficiality also suffers a critical trade-off, improving the exploitation capabilities at the cost of limiting its exploration. To tackle this issue, we propose Timber, a simple yet effective training-free method that enhances the exploration capability of the Instruct model while preserving its exploitation. The key insight is to partially revert Instruct towards the paired Base model by subtle yet targeted refinement of the weight deltas. Extensive experiments on Llama and Qwen series demonstrate that Timber consistently improves vanilla Instruct models, particularly on Pass@k performance. Our findings offer new insights into the post-training stage at the weight level and practical strategies to refine the Instruct model without training.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

Post-training has become a primary driver of recent progress in large reasoning models, and reasoning data are often the key variable determining whether this stage succeeds. Work on post-training reasoning data has grown rapidly, yet this literature remains scattered across dataset papers, reinforcement-learning recipes, reward-model studies, benchmarks, and frontier system reports. This paper is the first primer to synthesize over 150 key public studies and system reports on post-training reasoning data. We organize the field around four questions: what data objects exist, what makes them useful, how they are constructed, and how they scale. Together, this organization provides an attribution framework for future reasoning-data releases and post-training recipes.

Foundation models are transitioning from offline predictors to deployed systems expected to operate over long time horizons. In real deployments, objectives are not fixed: domains drift, user preferences evolve, and new tasks appear after the model has shipped. This elevates continual learning and instant personalization from optional features to core architectural requirements. Yet most adaptation pipelines still follow a static weight paradigm: after training (or after any adaptation step), inference executes a single parameter vector regardless of user intent, domain, or instance-specific constraints. This treats the trained or adapted model as a single point in parameter space. In heterogeneous and continually evolving regimes, distinct objectives can induce separated feasible regions over parameters, forcing any single shared update into compromise, interference, or overspecialization. As a result, continual learning and personalization are often implemented as repeated overwriting of shared weights, risking degradation of previously learned behaviors. We propose HY-WU (Weight Unleashing), a memory-first adaptation framework that shifts adaptation pressure away from overwriting a single shared parameter point. HY-WU implements functional (operator-level) memory as a neural module: a generator that synthesizes weight updates on-the-fly from the instance condition, yielding instance-specific operators without test-time optimization.

Benchmarks increasingly guide deployment, procurement and scientific screening, yet a score supports only the response it records, not necessarily the deployment action. We introduce deployment-complete benchmarking, which tests whether benchmark evidence determines a deployment action. A benchmark is complete for a claim exactly when the action is constant on each evidence fiber; mixed fibers expose missing deployment information, and completion curves quantify the evidence required to resolve ambiguity. In controlled response spaces, benchmark-channel conformal coverage of 94.98% transferred poorly to an unmeasured deployment channel (10.07%), whereas response-rank intervals achieved 94.91% coverage; even zero benchmark error certified only 45.4% of candidates at the largest residual size. Public audits revealed incompleteness, including 97.9% mixed Tox21 fibers and zero median certifiable fraction in main Matbench and JARVIS audits. In held-out replays, certify-then-acquire reduced false decisions from 1.19% to 0.027% in Tox21 and from 20.3% to 0.128% in JARVIS, while changing model choice and identifying deployment-relevant probes. Deployment-ready benchmarks should report evidence, supported actions, ambiguity and completion cost rather than scores alone.

Trustworthy deployment of LLM-based agents in software systems requires evaluating how they perform on application-specific workflows, with enough granularity to localize where they succeed and fail. Yet existing agent evaluation mechanisms are limited: benchmarks have low construct validity for application-specific workflows and environments, and replica evaluation environments are expensive and prone to drift. We propose Copy-on-Write (CoW) Scoring, a framework that evaluates agent operations directly within application environments using a PostgreSQL-level Copy-on-Write mechanism to isolate agent writes. CoW Scoring produces session- and operation-level scores that highlight where agents' database write operations succeed and fail in a given application environment, enabling inexpensive evaluation and iteration on agent harnesses and tool surfaces. We demonstrate the framework on Plane, an open-source project-management platform, where analysis surfaced specific issues in the tool surface, and corresponding fixes produced measurable improvements on affected models. Python library: https://github.com/trail-ml/agent-cow-python

Catalyzed by the popularity of blockchain technology, there has recently been a renewed interest in the design, implementation and evaluation of decentralized systems. Most of these systems are intended to be deployed at scale and in heterogeneous environments with real users and unpredictable workloads. Nevertheless, most research in this field evaluates such systems in controlled environments that poorly reflect the complex conditions of real-world environments. In this work, we argue that deployment is crucial to understanding decentralized mechanisms in a real-world environment and an enabler to building more robust and sustainable systems. We highlight the merits of deployment by comparing this approach with other experimental setups and show how our lab applied a deployment-first methodology. We then outline how we use Tribler, our peer-to-peer file-sharing application, to deploy and monitor decentralized mechanisms at scale. We illustrate the application of our methodology by describing a deployment trial in experimental tokenomics. Finally, we summarize four lessons learned from multiple deployment trials where we applied our methodology.

Checkpointing to preserve training states is crucial during the development of Large Foundation Models (LFMs), for training resumption upon various failures or changes in GPU resources and parallelism configurations. In addition, saved checkpoints are dispatched to evaluation tasks or transferred across different training stages (e.g., from pre-training to post-training). All these scenarios require resharding distributed checkpoints from one parallelism to another. In production environments, different LFMs are trained with various frameworks and storage backends, depending on model sizes and training scales. A high-performance checkpointing system is needed to enable efficient checkpoint management at scale throughout the lifecycle of LFM development. We introduce ByteCheckpoint, an industrial-grade checkpointing system for large-scale LFM training. ByteCheckpoint features: a parallelism-agnostic checkpoint representation that enables efficient load-time checkpoint resharding; a generic checkpoint saving/loading workflow to accommodate multiple training frameworks and support different storage backends; full-stack optimizations to ensure high I/O efficiency and scalability; a suite of monitoring tools to streamline large-scale performance analysis and bottleneck detection. Compared to existing open-source checkpointing systems [52, 58], ByteCheckpoint significantly reduces runtime checkpoint stalls, achieving an average reduction of 54.20x. For saving and loading times, ByteCheckpoint achieves improvements of up to 9.96x and 8.80x, respectively.

Foundation models have transformed automated code generation, yet autonomous software-engineering agents remain unreliable in realistic development settings. The dominant explanation locates this gap in model capability. We propose a different locus: software-engineering capability emerges from a model-harness-environment system, in which a runtime substrate -- the harness -- mediates how a foundation-model agent observes a project, acts on it, receives feedback, and establishes that a change is complete. We formalize this substrate as an AI Harness Engineering and identify eleven component responsibilities: task specification, context selection, tool access, project memory, task state, observability, failure attribution, verification, permissions, entropy auditing, and intervention recording. We operationalize the harness through a four-level ladder (H0-H3) that progressively exposes runtime support to the agent, and we propose a trace-based evaluation protocol that converts each agent run into an auditable episode package. Applied to a controlled validation task, the framework yields episode packages whose evidence structure varies systematically with harness level: lower levels produce only a final patch, higher levels produce reproduction logs, failure attributions, deterministic requirement checks, and structured verification reports. The framework reframes the central question of autonomous software engineering from whether a foundation model can produce a patch to whether the model-harness-environment system can produce a verifiably correct, attributed, and maintainable change. We outline a research program for the runtime systems that foundation-model software agents will require.

Recent years have witnessed a rapid development of mobile GUI agents powered by large language models (LLMs), which can autonomously execute diverse device-control tasks based on natural language instructions. The increasing accuracy of these agents on standard benchmarks has raised expectations for large-scale real-world deployment, and there are already several commercial agents released and used by early adopters. However, are we really ready for GUI agents integrated into our daily devices as system building blocks? We argue that an important pre-deployment validation is missing to examine whether the agents can maintain their performance under real-world threats. Specifically, unlike existing common benchmarks that are based on simple static app contents (they have to do so to ensure environment consistency between different tests), real-world apps are filled with contents from untrustworthy third parties, such as advertisement emails, user-generated posts and medias, etc. ... To this end, we introduce a scalable app content instrumentation framework to enable flexible and targeted content modifications within existing applications. Leveraging this framework, we create a test suite comprising both a dynamic task execution environment and a static dataset of challenging GUI states. The dynamic environment encompasses 122 reproducible tasks, and the static dataset consists of over 3,000 scenarios constructed from commercial apps. We perform experiments on both open-source and commercial GUI agents. Our findings reveal that all examined agents can be significantly degraded due to third-party contents, with an average misleading rate of 42.0% and 36.1% in dynamic and static environments respectively. The framework and benchmark has been released at https://agenthazard.github.io.

Although Foundation Models (FMs), such as GPT-4, are increasingly used in domains like finance and software engineering, reliance on textual interfaces limits these models' real-world interaction. To address this, FM providers introduced tool calling-triggering a proliferation of frameworks with distinct tool interfaces. In late 2024, Anthropic introduced the Model Context Protocol (MCP) to standardize this tool ecosystem, which has become the de facto standard with over eight million weekly SDK downloads. Despite its adoption, MCP's AI-driven, non-deterministic control flow introduces new risks to sustainability, security, and maintainability, warranting closer examination. Towards this end, we present the first large-scale empirical study of MCP servers. Using state-of-the-art health metrics and a hybrid analysis pipeline, combining a general-purpose static analysis tool with an MCP-specific scanner, we evaluate 1,899 open-source MCP servers to assess their health, security, and maintainability. Despite MCP servers demonstrating strong health metrics, we identify eight distinct vulnerabilities - only three overlapping with traditional software vulnerabilities. Additionally, 7.2% of servers contain general vulnerabilities and 5.5% exhibit MCP-specific tool poisoning. Regarding maintainability, while 66% exhibit code smells, 14.4% contain nine bug patterns overlapping with traditional open-source software projects. These findings highlight the need for MCP-specific vulnerability detection techniques while reaffirming the value of traditional analysis and refactoring practices.

Systems based on Large Language Models (LLMs) have become formidable tools for automating research and software production. However, their governance remains a challenge when technical requirements demand absolute consistency, auditability, and predictable control over cost and latency. Recent literature highlights two phenomena that aggravate this scenario: the stochastic variance inherent in the model's judgment (often treated as "systemic noise") and the substantial degradation of context utilization in long inputs, with critical losses when decisive information is diluted in the middle of the prompt. This article proposes PARCER as an engineering response to these limitations. The framework acts as a declarative "operational contract" in YAML, transforming unstructured interactions into versioned and executable artifacts. PARCER imposes strict governance structured into seven operational phases, introducing decision hygiene practices inspired by legal judgments to mitigate noise, adaptive token budgeting, formalized recovery routes (fallbacks) for context preservation, and systemic observability via OpenTelemetry. The objective of this work is to present the conceptual and technical architecture of PARCER, positioning it as a necessary transition from simple "prompt engineering" to "context engineering with governable governance".

Security is becoming a pivotal point in cloud platforms. Several divisions, such as business organisations, health care, government, etc., have experienced cyber-attacks on their infrastructures. This research focuses on security issues within Continuous Integration and Deployment (CI/CD) pipelines in a cloud platform as a reaction to recent cyber breaches. This research proposes a blockchain-based solution to enhance CI/CD pipeline security. This research aims to develop a framework that leverages blockchain's distributed ledger technology and tamper-resistant features to improve CI/CD pipeline security. The goal is to emphasise secure software deployment by integrating threat modelling frameworks and adherence to coding standards. It also aims to employ tools to automate security testing to detect publicly disclosed vulnerabilities and flaws, such as an outdated version of Java Spring Framework, a JavaScript library from an unverified source, or a database library that allows SQL injection attacks in the deployed software through the framework.

Foundation model development attracts a rapidly expanding body of contributors, scientists, and applications. To help shape responsible development practices, we introduce the Foundation Model Development Cheatsheet: a growing collection of 250+ tools and resources spanning text, vision, and speech modalities. We draw on a large body of prior work to survey resources (e.g. software, documentation, frameworks, guides, and practical tools) that support informed data selection, processing, and understanding, precise and limitation-aware artifact documentation, efficient model training, advance awareness of the environmental impact from training, careful model evaluation of capabilities, risks, and claims, as well as responsible model release, licensing and deployment practices. We hope this curated collection of resources helps guide more responsible development. The process of curating this list, enabled us to review the AI development ecosystem, revealing what tools are critically missing, misused, or over-used in existing practices. We find that (i) tools for data sourcing, model evaluation, and monitoring are critically under-serving ethical and real-world needs, (ii) evaluations for model safety, capabilities, and environmental impact all lack reproducibility and transparency, (iii) text and particularly English-centric analyses continue to dominate over multilingual and multi-modal analyses, and (iv) evaluation of systems, rather than just models, is needed so that capabilities and impact are assessed in context.

This study examined code issue detection and revision automation by integrating Large Language Models (LLMs) such as OpenAI's GPT-3.5 Turbo and GPT-4o into software development workflows. A static code analysis framework detects issues such as bugs, vulnerabilities, and code smells within a large-scale software project. Detailed information on each issue was extracted and organized to facilitate automated code revision using LLMs. An iterative prompt engineering process is applied to ensure that prompts are structured to produce accurate and organized outputs aligned with the project requirements. Retrieval-augmented generation (RAG) is implemented to enhance the relevance and precision of the revisions, enabling LLM to access and integrate real-time external knowledge. The issue of LLM hallucinations - where the model generates plausible but incorrect outputs - is addressed by a custom-built "Code Comparison App," which identifies and corrects erroneous changes before applying them to the codebase. Subsequent scans using the static code analysis framework revealed a significant reduction in code issues, demonstrating the effectiveness of combining LLMs, static analysis, and RAG to improve code quality, streamline the software development process, and reduce time and resource expenditure.

Retrieval Augmented Generation (RAG) has emerged as a standard paradigm for enhancing the factual accuracy and contextual relevance of Large Language Models (LLMs) by integrating retrieval mechanisms. However, existing evaluation frameworks fail to provide a holistic black-box approach to assessing RAG systems, especially in real-world deployment scenarios. To address this gap, we introduce SCARF (System for Comprehensive Assessment of RAG Frameworks), a modular and flexible evaluation framework designed to benchmark deployed RAG applications systematically. SCARF provides an end-to-end, black-box evaluation methodology, enabling a limited-effort comparison across diverse RAG frameworks. Our framework supports multiple deployment configurations and facilitates automated testing across vector databases and LLM serving strategies, producing a detailed performance report. Moreover, SCARF integrates practical considerations such as response coherence, providing a scalable and adaptable solution for researchers and industry professionals evaluating RAG applications. Using the REST APIs interface, we demonstrate how SCARF can be applied to real-world scenarios, showcasing its flexibility in assessing different RAG frameworks and configurations. SCARF is available at GitHub repository.

Retrieval-augmented generation (RAG) systems are gaining traction in enterprise settings, yet stringent data protection regulations prevent many organizations from using cloud-based services, necessitating on-premises deployments. While existing blueprints and reference architectures focus on cloud deployments and lack enterprise-grade components, comprehensive on-premises implementation frameworks remain scarce. This paper aims to address this gap by presenting a comprehensive AI engineering blueprint for scalable on-premises enterprise RAG solutions. It is designed to address common challenges and streamline the integration of RAG into existing enterprise infrastructure. The blueprint provides: (1) an end-to-end reference architecture described using the 4+1 view model, (2) a reference application for on-premises deployment, and (3) best practices for tooling, development, and CI/CD pipelines, all publicly available on GitHub. Ongoing case studies and expert interviews with industry partners will assess its practical benefits.

Reinforcement learning (RL) has become a central post-training tool for improving the reasoning abilities of large language models (LLMs). In these systems, the rollout, the trajectory sampled from a prompt to termination, including intermediate reasoning steps and optional tool or environment interactions, determines the data the optimizer learns from, yet rollout design is often underreported. This survey provides an optimizer-agnostic view of rollout strategies for RL-based post-training of reasoning LLMs. We formalize rollout pipelines with unified notation and introduce Generate-Filter-Control-Replay (GFCR), a lifecycle taxonomy that decomposes rollout pipelines into four modular stages: Generate proposes candidate trajectories and topologies; Filter constructs intermediate signals via verifiers, judges, critics; Control allocates compute and makes continuation/branching/stopping decisions under budgets; and Replay retains and reuses artifacts across rollouts without weight updates, including self-evolving curricula that autonomously generate new training tasks. We complement GFCR with a criterion taxonomy of reliability, coverage, and cost sensitivity that characterizes rollout trade-offs. Using this framework, we synthesize methods spanning RL with verifiable rewards, process supervision, judge-based gating, guided and tree/segment rollouts, adaptive compute allocation, early-exit and partial rollouts, throughput optimization, and replay/recomposition for self-improvement. We ground the framework with case studies in math, code/SQL, multimodal reasoning, tool-using agents, and agentic skill benchmarks that evaluate skill induction, reuse, and cross-task transfer. Finally, we provide a diagnostic index that maps common rollout pathologies to GFCR modules and mitigation levers, alongside open challenges for building reproducible, compute-efficient, and trustworthy rollout pipelines.

Graphical user interface (GUI) agents can substantially improve productivity by automating frequently executed long-latency tasks on mobile devices. However, existing evaluation benchmarks are still constrained to limited applications, simple tasks, and coarse-grained metrics. To address this, we introduce AndroidLens, a challenging evaluation framework for mobile GUI agents, comprising 571 long-latency tasks in both Chinese and English environments, each requiring an average of more than 26 steps to complete. The framework features: (1) tasks derived from real-world user scenarios across 38 domains, covering complex types such as multi-constraint, multi-goal, and domain-specific tasks; (2) static evaluation that preserves real-world anomalies and allows multiple valid paths to reduce bias; and (3) dynamic evaluation that employs a milestone-based scheme for fine-grained progress measurement via Average Task Progress (ATP). Our evaluation indicates that even the best models reach only a 12.7% task success rate and 50.47% ATP. We also underscore key challenges in real-world environments, including environmental anomalies, adaptive exploration, and long-term memory retention.

Interactive agent benchmarks face a tension between scalable construction and realistic workflow evaluation. Hand-authored tasks are expensive to extend and revise, while static prompt evaluation misses failures that only appear when agents operate over persistent state. Existing interactive benchmarks have advanced agent evaluation significantly, but most initialize tasks from clean state and do not systematically test how agents handle pre-existing partial, stale, or conflicting artifacts. We present ClawForge, a generator-backed benchmark framework for executable command-line workflows under state conflict. The framework compiles scenario templates, grounded slots, initialized state, reference trajectories, and validators into reproducible task specifications, and evaluates agents step by step over persistent workflow surfaces using normalized end state and observable side effects rather than exact trajectory matching. We instantiate this framework as the ClawForge-Bench (17 scenarios, 6 ability categories). Results across seven frontier models show that the best model reaches only 45.3% strict accuracy, wrong-state replacement remains below 17\% for all models, and the widest model separation (17% to 90%) is driven by whether agents inspect existing state before acting. Partial-credit and step-efficiency analyses further reveal that many failures are near-miss closures rather than early breakdowns, and that models exhibit qualitatively different failure styles under state conflict.

Building systems that are good for society in the face of complex societal effects requires a dynamic approach. Recent approaches to machine learning (ML) documentation have demonstrated the promise of discursive frameworks for deliberation about these complexities. However, these developments have been grounded in a static ML paradigm, leaving the role of feedback and post-deployment performance unexamined. Meanwhile, recent work in reinforcement learning has shown that the effects of feedback and optimization objectives on system behavior can be wide-ranging and unpredictable. In this paper we sketch a framework for documenting deployed and iteratively updated learning systems, which we call Reward Reports. Taking inspiration from various contributions to the technical literature on reinforcement learning, we outline Reward Reports as living documents that track updates to design choices and assumptions behind what a particular automated system is optimizing for. They are intended to track dynamic phenomena arising from system deployment, rather than merely static properties of models or data. After presenting the elements of a Reward Report, we discuss a concrete example: Meta's BlenderBot 3 chatbot. Several others for game-playing (DeepMind's MuZero), content recommendation (MovieLens), and traffic control (Project Flow) are included in the appendix.

We present Springdrift, a persistent runtime for long-lived LLM agents. The system integrates an auditable execution substrate (append-only memory, supervised processes, git-backed recovery), a case-based reasoning memory layer with hybrid retrieval (evaluated against a dense cosine baseline), a deterministic normative calculus for safety gating with auditable axiom trails, and continuous ambient self-perception via a structured self-state representation (the sensorium) injected each cycle without tool calls. These properties support behaviours difficult to achieve in session-bounded systems: cross-session task continuity, cross-channel context maintenance, end-to-end forensic reconstruction of decisions, and self-diagnostic behaviour. We report on a single-instance deployment over 23 days (19 operating days), during which the agent diagnosed its own infrastructure bugs, classified failure modes, identified an architectural vulnerability, and maintained context across email and web channels -- without explicit instruction. We introduce the term Artificial Retainer for this category: a non-human system with persistent memory, defined authority, domain-specific autonomy, and forensic accountability in an ongoing relationship with a specific principal -- distinguished from software assistants and autonomous agents, drawing on professional retainer relationships and the bounded autonomy of trained working animals. This is a technical report on a systems design and deployment case study, not a benchmark-driven evaluation. Evidence is from a single instance with a single operator, presented as illustration of what these architectural properties can support in practice. Implemented in approximately Gleam on Erlang/OTP. Code, artefacts, and redacted operational logs will be available at https://github.com/seamus-brady/springdrift upon publication.

We present Spacerini, a modular framework for seamless building and deployment of interactive search applications, designed to facilitate the qualitative analysis of large scale research datasets. Spacerini integrates features from both the Pyserini toolkit and the Hugging Face ecosystem to ease the indexing text collections and deploy them as search engines for ad-hoc exploration and to make the retrieval of relevant data points quick and efficient. The user-friendly interface enables searching through massive datasets in a no-code fashion, making Spacerini broadly accessible to anyone looking to qualitatively audit their text collections. This is useful both to IR~researchers aiming to demonstrate the capabilities of their indexes in a simple and interactive way, and to NLP~researchers looking to better understand and audit the failure modes of large language models. The framework is open source and available on GitHub: https://github.com/castorini/hf-spacerini, and includes utilities to load, pre-process, index, and deploy local and web search applications. A portfolio of applications created with Spacerini for a multitude of use cases can be found by visiting https://hf.co/spacerini.

Neural Radiance Fields (NeRF) are a rapidly growing area of research with wide-ranging applications in computer vision, graphics, robotics, and more. In order to streamline the development and deployment of NeRF research, we propose a modular PyTorch framework, Nerfstudio. Our framework includes plug-and-play components for implementing NeRF-based methods, which make it easy for researchers and practitioners to incorporate NeRF into their projects. Additionally, the modular design enables support for extensive real-time visualization tools, streamlined pipelines for importing captured in-the-wild data, and tools for exporting to video, point cloud and mesh representations. The modularity of Nerfstudio enables the development of Nerfacto, our method that combines components from recent papers to achieve a balance between speed and quality, while also remaining flexible to future modifications. To promote community-driven development, all associated code and data are made publicly available with open-source licensing at https://nerf.studio.

We develop and counterfactually evaluate a resolution-aware risk-design framework (PIRAP) for perpetual futures whose underlying tracks a single binary prediction-market probability through resolution. The framework specifies six components: an index estimator combining mid-price, depth-weighted mid, and time-decayed VWAP; jump-aware tiered margin sized against bounded-event terminal-collapse magnitude; leverage compression schedule contracting toward resolution; resolution-aware funding rule with boundary-aware correction; a multi-stage halt protocol; and an eligibility framework. Two formal non-portability propositions establish that standard basis-only funding paired with continuous-vol static margin fails on bounded-event underlyings. Empirical evaluation uses Polymarket's PMXT v2 archive for 2026-04-21 to 2026-04-27 (13,298-market analysis sample passing adequacy gates from 61,087 ingested; 13,115 resolved within the empirical window for E3). E1 evaluates two pre-registered stylized facts; E2 conducts counterfactual replay across three engine configurations; E3 isolates the resolution-zone protocol's contribution. Results are mixed. Five pre-registered floors: stylized-fact floors (boundary depth asymmetry, terminal-jump magnitude) PASS; welfare-side directional floors (final-hour liquidation -6%, drawdown -5.1% pooled, median PnL +14%) two FAIL one PASS; E3 mechanic floors (final-hour liquidation -80% by halt construction PASS; bad-debt frequency +2.4% FAIL). Three of five materiality floors fail: the framework as specified does not validate deployment, but the empirical record establishes a halt-versus-margin scope distinction (halt addresses execution-channel risk; terminal-jump bad-debt remains margin-side) and documents a pre-emption trade-off constraining the dynamic-margin component. The paper concludes with structural recommendations and explicit non-deployable status.

The emergent phenomena of large foundation models have revolutionized natural language processing. However, evaluating these models presents significant challenges due to their size, capabilities, and deployment across diverse applications. Existing literature often focuses on individual aspects, such as benchmark performance or specific tasks, but fails to provide a cohesive process that integrates the nuances of diverse use cases with broader ethical and operational considerations. This work focuses on three key aspects: (1) Formalizing the Evaluation Process by providing a structured framework tailored to specific use-case contexts, (2) Offering Actionable Tools and Frameworks such as checklists and templates to ensure thorough, reproducible, and practical evaluations, and (3) Surveying Recent Work with a targeted review of advancements in LLM evaluation, emphasizing real-world applications.

Progress in software-engineering agents is increasingly constrained by the scarcity of executable, scalable, and realistic data for training and evaluation. This scarcity stems from three fundamental challenges in existing pipelines: environments are brittle and difficult to reproduce across languages; synthesizing realistic, system-level bugs at scale is computationally expensive; and existing data predominantly consists of short-horizon repairs, failing to capture long-horizon competencies like architectural consistency. We introduce SWE-Hub, an end-to-end system that operationalizes the data factory abstraction by unifying environment automation, scalable synthesis, and diverse task generation into a coherent production stack. At its foundation, the Env Agent establishes a shared execution substrate by automatically converting raw repository snapshots into reproducible, multi-language container environments with standardized interfaces. Built upon this substrate, SWE-Scale engine addresses the need for high-throughput generation, combining cross-language code analysis with cluster-scale validation to synthesize massive volumes of localized bug-fix instances. Bug Agent generates high-fidelity repair tasks by synthesizing system-level regressions involving cross-module dependencies, paired with user-like issue reports that describe observable symptoms rather than root causes. Finally, SWE-Architect expands the task scope from repair to creation by translating natural-language requirements into repository-scale build-a-repo tasks. By integrating these components, SWE-Hub establishes a unified production pipeline capable of continuously delivering executable tasks across the entire software engineering lifecycle.

Modern software systems are guided by hierarchical architectural concepts -- software architectures, reference architectures, and architectural frameworks -- each operating at a distinct level of abstraction. These artifacts promote reuse, scalability, and consistency, but also embed tradeoffs that shape critical quality attributes such as modifiability, performance, and security. Existing evaluation methods, such as the Architecture Tradeoff Analysis Method (ATAM), focus on system-specific architectures and are not designed to address the broader generality and variability of higher-level architectural forms. To close this gap, we introduce the Architecture Tradeoff and Risk Analysis Framework (ATRAF) -- a unified, scenario-driven framework for evaluating tradeoffs and risks across architectural levels. ATRAF encompasses three methods: the Architecture Tradeoff and Risk Analysis Method (ATRAM), extending ATAM with enhanced risk identification for concrete systems; the Reference Architecture Tradeoff and Risk Analysis Method (RATRAM), adapting ATRAM to the evaluation of domain-level reference architectures; and the Architectural Framework Tradeoff and Risk Analysis Method (AFTRAM), supporting the evaluation of architectural frameworks that guide entire system families. All three methods follow an iterative spiral process that enables the identification of sensitivities, tradeoffs, and risks while supporting continuous refinement of architectural artifacts. We demonstrate ATRAF through progressively abstracted examples derived from the Remote Temperature Sensor (RTS) case, originally introduced in the ATAM literature. ATRAF equips architects, reference modelers, and framework designers with a practical, systematic approach for analyzing design alternatives and managing quality attribute tradeoffs early in the lifecycle and across all levels of architectural abstraction.

Software modernisation through the migration from monolithic architectures to microservices has become increasingly critical, yet identifying effective service boundaries remains a complex and unresolved challenge. Although numerous automated microservice decomposition frameworks have been proposed, their evaluation is often fragmented due to inconsistent benchmark systems, incompatible metrics, and limited reproducibility, thus hindering objective comparison. This work presents a unified comparative evaluation of state-of-the-art microservice decomposition approaches spanning static, dynamic, and hybrid techniques. Using a consistent metric computation pipeline, we assess the decomposition quality across widely used benchmark systems (JPetStore, AcmeAir, DayTrader, and Plants) using Structural Modularity (SM), Interface Number(IFN), Inter-partition Communication (ICP), Non-Extreme Distribution (NED), and related indicators. Our analysis combines results reported in prior studies with experimentally reproduced outputs from available replication packages. Findings indicate that the hierarchical clustering-based methods, particularly HDBScan, produce the most consistently balanced decompositions across benchmarks, achieving strong modularity while minimizing communication and interface overhead.

We present RepoST, a scalable method to construct environments that provide execution feedback for repository-level code generation for both training and evaluation. Unlike existing works that aim to build entire repositories for execution, which is challenging for both human and LLMs, we provide execution feedback with sandbox testing, which isolates a given target function and its dependencies to a separate script for testing. Sandbox testing reduces the complexity of external dependencies and enables constructing environments at a large scale. We use our method to construct RepoST-Train, a large-scale train set with 7,415 functions from 832 repositories. Training with the execution feedback provided by RepoST-Train leads to a performance gain of 5.5% Pass@1 on HumanEval and 3.5% Pass@1 on RepoEval. We also build an evaluation dataset, RepoST-Eval, and benchmark 12 code generation models.

Foundation models are routinely fine-tuned for use in particular domains, yet safety assessments are typically conducted only on base models, implicitly assuming that safety properties persist through downstream adaptation. We test this assumption by analyzing the safety behavior of 100 models, including widely deployed fine-tunes in the medical and legal domains as well as controlled adaptations of open foundation models alongside their bases. Across general-purpose and domain-specific safety benchmarks, we find that benign fine-tuning induces large, heterogeneous, and often contradictory changes in measured safety: models frequently improve on some instruments while degrading on others, with substantial disagreement across evaluations. These results show that safety behavior is not stable under ordinary downstream adaptation, raising critical questions about governance and deployment practices centered on base-model evaluations. Without explicit re-evaluation of fine-tuned models in deployment-relevant contexts, such approaches fall short of adequately managing downstream risk, overlooking practical sources of harm -- failures that are especially consequential in high-stakes settings and challenge current accountability paradigms.

Software testing has progressed toward intelligent automation, yet current AI-based test generators still suffer from static, single-shot outputs that frequently produce invalid, redundant, or non-executable tests due to the lack of execution aware feedback. This paper introduces an agentic multi-model testing framework a closed-loop, self-correcting system in which a Test Generation Agent, an Execution and Analysis Agent, and a Review and Optimization Agent collaboratively generate, execute, analyze, and refine tests until convergence. By using sandboxed execution, detailed failure reporting, and iterative regeneration or patching of failing tests, the framework autonomously improves test quality and expands coverage. Integrated into a CI/CD-compatible pipeline, it leverages reinforcement signals from coverage metrics and execution outcomes to guide refinement. Empirical evaluations on microservice based applications show up to a 60% reduction in invalid tests, 30% coverage improvement, and significantly reduced human effort compared to single-model baselines demonstrating that multi-agent, feedback-driven loops can evolve software testing into an autonomous, continuously learning quality assurance ecosystem for self-healing, high-reliability codebases.

The landscape of software development has witnessed a paradigm shift with the advent of AI-powered assistants, exemplified by GitHub Copilot. However, existing solutions are not leveraging all the potential capabilities available in an IDE such as building, testing, executing code, git operations, etc. Therefore, they are constrained by their limited capabilities, primarily focusing on suggesting code snippets and file manipulation within a chat-based interface. To fill this gap, we present AutoDev, a fully automated AI-driven software development framework, designed for autonomous planning and execution of intricate software engineering tasks. AutoDev enables users to define complex software engineering objectives, which are assigned to AutoDev's autonomous AI Agents to achieve. These AI agents can perform diverse operations on a codebase, including file editing, retrieval, build processes, execution, testing, and git operations. They also have access to files, compiler output, build and testing logs, static analysis tools, and more. This enables the AI Agents to execute tasks in a fully automated manner with a comprehensive understanding of the contextual information required. Furthermore, AutoDev establishes a secure development environment by confining all operations within Docker containers. This framework incorporates guardrails to ensure user privacy and file security, allowing users to define specific permitted or restricted commands and operations within AutoDev. In our evaluation, we tested AutoDev on the HumanEval dataset, obtaining promising results with 91.5% and 87.8% of Pass@1 for code generation and test generation respectively, demonstrating its effectiveness in automating software engineering tasks while maintaining a secure and user-controlled development environment.

Despite the huge success of Large Language Models (LLMs) in coding assistants like GitHub Copilot, these models struggle to understand the context present in the repository (e.g., imports, parent classes, files with similar names, etc.), thereby producing inaccurate code completions. This effect is more pronounced when using these assistants for repositories that the model has not seen during training, such as proprietary software or work-in-progress code projects. Recent work has shown the promise of using context from the repository during inference. In this work, we extend this idea and propose RepoFusion, a framework to train models to incorporate relevant repository context. Experiments on single-line code completion show that our models trained with repository context significantly outperform much larger code models as CodeGen-16B-multi (sim73times larger) and closely match the performance of the sim 70times larger StarCoderBase model that was trained with the Fill-in-the-Middle objective. We find these results to be a novel and compelling demonstration of the gains that training with repository context can bring. We carry out extensive ablation studies to investigate the impact of design choices such as context type, number of contexts, context length, and initialization within our framework. Lastly, we release Stack-Repo, a dataset of 200 Java repositories with permissive licenses and near-deduplicated files that are augmented with three types of repository contexts. Additionally, we are making available the code and trained checkpoints for our work. Our released resources can be found at https://huggingface.co/RepoFusion.

AI agents have become surprisingly proficient at software engineering over the past year, largely due to improvements in reasoning capabilities. This raises a deeper question: can these systems extend their capabilities to automate AI research itself? In this paper, we explore post-training, the critical phase that turns base LLMs into useful assistants. We introduce PostTrainBench to benchmark how well LLM agents can perform post-training autonomously under bounded compute constraints (10 hours on one H100 GPU). We ask frontier agents (e.g., Claude Code with Opus 4.6) to optimize the performance of a base LLM on a particular benchmark (e.g., Qwen3-4B on AIME). Importantly, we do not provide any predefined strategies to the agents and instead give them full autonomy to find necessary information on the web, run experiments, and curate data. We find that frontier agents make substantial progress but generally lag behind instruction-tuned LLMs from leading providers: 23.2% for the best agent vs. 51.1% for official instruction-tuned models. However, agents can exceed instruction-tuned models in targeted scenarios: GPT-5.1 Codex Max achieves 89% on BFCL with Gemma-3-4B vs. 67% for the official model. We also observe several failure modes worth flagging. Agents sometimes engage in reward hacking: training on the test set, downloading existing instruction-tuned checkpoints instead of training their own, and using API keys they find to generate synthetic data without authorization. These behaviors are concerning and highlight the importance of careful sandboxing as these systems become more capable. Overall, we hope PostTrainBench will be useful for tracking progress in AI R&D automation and for studying the risks that come with it. Website and code are available at https://posttrainbench.com/.

AI agents are increasingly deployed on complex, domain-specific workflows -- navigating enterprise web applications that require dozens of clicks and form fills, orchestrating multi-step research pipelines that span search, extraction, and synthesis, automating code review across unfamiliar repositories, and handling customer escalations that demand nuanced domain knowledge. Each new task domain requires painstaking, expert-driven harness engineering: designing the prompts, tools, orchestration logic, and evaluation criteria that make a foundation model effective. We present a two-level framework that automates this process. At the first level, the Harness Evolution Loop optimizes a worker agent's harness H for a single task: a Worker Agent W_{H} executes the task, an Evaluator Agent V adversarially diagnoses failures and scores performance, and an Evolution Agent E modifies the harness based on the full history of prior attempts. At the second level, the Meta-Evolution Loop optimizes the evolution protocol Λ= (W_{H}, H^{(0)}, V, E) itself across diverse tasks, learning a protocol Λ^{(text{best)} that enables rapid harness convergence on any new task -- so that adapting an agent to a novel domain requires no human harness engineering at all.} We formalize the correspondence to meta-learning and present both algorithms. The framework shifts manual harness engineering into automated harness engineering, and takes one step further -- automating the design of the automation itself.

Foundation models (FM), such as large language models (LLMs), which are large-scale machine learning (ML) models, have demonstrated remarkable adaptability in various downstream software engineering (SE) tasks, such as code completion, code understanding, and software development. As a result, FM leaderboards, especially those hosted on cloud platforms, have become essential tools for SE teams to compare and select the best third-party FMs for their specific products and purposes. However, the lack of standardized guidelines for FM evaluation and comparison threatens the transparency of FM leaderboards and limits stakeholders' ability to perform effective FM selection. As a first step towards addressing this challenge, our research focuses on understanding how these FM leaderboards operate in real-world scenarios ("leaderboard operations") and identifying potential leaderboard pitfalls and areas for improvement ("leaderboard smells"). In this regard, we perform a multivocal literature review to collect up to 721 FM leaderboards, after which we examine their documentation and engage in direct communication with leaderboard operators to understand their workflow patterns. Using card sorting and negotiated agreement, we identify 5 unique workflow patterns and develop a domain model that outlines the essential components and their interaction within FM leaderboards. We then identify 8 unique types of leaderboard smells in LBOps. By mitigating these smells, SE teams can improve transparency, accountability, and collaboration in current LBOps practices, fostering a more robust and responsible ecosystem for FM comparison and selection.

We present app.build (https://github.com/appdotbuild/agent/), an open-source framework that improves LLM-based application generation through systematic validation and structured environments. Our approach combines multi-layered validation pipelines, stack-specific orchestration, and model-agnostic architecture, implemented across three reference stacks. Through evaluation on 30 generation tasks, we demonstrate that comprehensive validation achieves 73.3% viability rate with 30% reaching perfect quality scores, while open-weights models achieve 80.8% of closed-model performance when provided structured environments. The open-source framework has been adopted by the community, with over 3,000 applications generated to date. This work demonstrates that scaling reliable AI agents requires scaling environments, not just models -- providing empirical insights and complete reference implementations for production-oriented agent systems.

This paper presents a fully automated, data-driven framework for the large-scale deployment of reconfigurable intelligent surfaces (RISs) in cellular networks. Leveraging physically consistent ray tracing and empirical data from a commercial deployment in the UK, the proposed method jointly optimizes RIS placement, orientation, configuration, and base station beamforming in dense urban environments across frequency bands (corresponding to 4G, 5G, and a hypothetical 6G system). Candidate RIS locations are identified via reflection- and scattering-based heuristics using calibrated electromagnetic models within the Sionna Ray Tracing (RT) engine. Outage users are clustered to reduce deployment complexity, and the tradeoff between coverage gains and infrastructure cost is systematically evaluated. It is shown that achieving meaningful coverage improvement in urban areas requires a dense deployment of large-aperture RIS units, raising questions about cost-effectiveness. To facilitate reproducibility and future research, the complete simulation framework and RIS deployment algorithms are provided as open-source software.

Scripting interfaces enable users to automate tasks and customize software workflows, but creating scripts traditionally requires programming expertise and familiarity with specific APIs, posing barriers for many users. While Large Language Models (LLMs) can generate code from natural language queries, runtime code generation is severely limited due to unverified code, security risks, longer response times, and higher computational costs. To bridge the gap, we propose an offline simulation framework to curate a software-specific skillset, a collection of verified scripts, by exploiting LLMs and publicly available scripting guides. Our framework comprises two components: (1) task creation, using top-down functionality guidance and bottom-up API synergy exploration to generate helpful tasks; and (2) skill generation with trials, refining and validating scripts based on execution feedback. To efficiently navigate the extensive API landscape, we introduce a Graph Neural Network (GNN)-based link prediction model to capture API synergy, enabling the generation of skills involving underutilized APIs and expanding the skillset's diversity. Experiments with Adobe Illustrator demonstrate that our framework significantly improves automation success rates, reduces response time, and saves runtime token costs compared to traditional runtime code generation. This is the first attempt to use software scripting interfaces as a testbed for LLM-based systems, highlighting the advantages of leveraging execution feedback in a controlled environment and offering valuable insights into aligning AI capabilities with user needs in specialized software domains.

Is natural-language-driven earth observation data analysis now feasible with the assistance of Large Language Models (LLMs)? For open science in service of public interest, feasibility requires reliably high accuracy, interactive latencies, low (sustainable) costs, open LLMs, and openly maintainable software -- hence, the challenge. What are the techniques and programming system requirements necessary for satisfying these constraints, and what is the corresponding development and maintenance burden in practice? This study lays the groundwork for exploring these questions, introducing an impactful earth science use-case, and providing a software framework with evaluation data and metrics, along with initial results from employing model scaling, prompt-optimization, and inference-time scaling optimization techniques. While we attain high accuracy (near 100%) across 10 of 11 metrics, the analysis further considers cost (token-spend), latency, and maintainability across this space of techniques. Finally, we enumerate opportunities for further research, general programming and evaluation framework development, and ongoing work for a comprehensive, deployable solution. This is a call for collaboration and contribution.

Large Language Models (LLMs) and code agents in software development are rapidly evolving from generating isolated code snippets to producing full-fledged software applications with graphical interfaces, interactive logic, and dynamic behaviors. However, current benchmarks fall short in evaluating such production-ready software, as they often rely on static checks or binary pass/fail scripts, failing to capture the interactive behaviors and runtime dynamics that define real-world usability - qualities that only emerge when an application is actively used. This is the blind spot of current evaluation: you don't know if an app works until you click through it, interact with it, and observe how it responds. To bridge this gap, we introduce RealDevWorld, a novel evaluation framework for automated end-to-end assessment of LLMs' ability to generate production-ready repositories from scratch. It features two key components: (1) RealDevBench, a diverse collection of 194 open-ended software engineering tasks across multiple domains, incorporating multimodal elements to reflect real-world complexity; and (2) AppEvalPilot, a new agent-as-a-judge evaluation system that simulates realistic, GUI-based user interactions to automatically and holistically assess software functional correctness, visual fidelity, and runtime behavior. The framework delivers fine-grained, task-specific diagnostic feedback, supporting nuanced evaluation beyond simple success/failure judgments. Empirical results show that RealDevWorld delivers effective, automatic, and human-aligned evaluations, achieving an accuracy of 0.92 and a correlation of 0.85 with expert human assessments, while significantly reducing the reliance on manual review. This enables scalable, human-aligned assessment of production-level software generated by LLMs. Our code is available on GitHub.

Foundation models are powerful technologies: how they are released publicly directly shapes their societal impact. In this position paper, we focus on open foundation models, defined here as those with broadly available model weights (e.g. Llama 2, Stable Diffusion XL). We identify five distinctive properties (e.g. greater customizability, poor monitoring) of open foundation models that lead to both their benefits and risks. Open foundation models present significant benefits, with some caveats, that span innovation, competition, the distribution of decision-making power, and transparency. To understand their risks of misuse, we design a risk assessment framework for analyzing their marginal risk. Across several misuse vectors (e.g. cyberattacks, bioweapons), we find that current research is insufficient to effectively characterize the marginal risk of open foundation models relative to pre-existing technologies. The framework helps explain why the marginal risk is low in some cases, clarifies disagreements about misuse risks by revealing that past work has focused on different subsets of the framework with different assumptions, and articulates a way forward for more constructive debate. Overall, our work helps support a more grounded assessment of the societal impact of open foundation models by outlining what research is needed to empirically validate their theoretical benefits and risks.

As large language models (LLMs) become increasingly capable, it is prudent to assess whether safety measures remain effective even if LLMs intentionally try to bypass them. Previous work introduced control evaluations, an adversarial framework for testing deployment strategies of untrusted models (i.e., models which might be trying to bypass safety measures). While prior work treats a single failure as unacceptable, we perform control evaluations in a "distributed threat setting" -- a setting where no single action is catastrophic and no single action provides overwhelming evidence of misalignment. We approach this problem with a two-level deployment framework that uses an adaptive macro-protocol to choose between micro-protocols. Micro-protocols operate on a single task, using a less capable, but extensively tested (trusted) model to harness and monitor the untrusted model. Meanwhile, the macro-protocol maintains an adaptive credence on the untrusted model's alignment based on its past actions, using it to pick between safer and riskier micro-protocols. We evaluate our method in a code generation testbed where a red team attempts to generate subtly backdoored code with an LLM whose deployment is safeguarded by a blue team. We plot Pareto frontiers of safety (# of non-backdoored solutions) and usefulness (# of correct solutions). At a given level of usefulness, our adaptive deployment strategy reduces the number of backdoors by 80% compared to non-adaptive baselines.

We deployed an LLM agent with ReAct reasoning and full data access. It executed flawlessly, yet when asked "Why is completion rate 80%?", it returned metrics instead of causal explanation. The agent knew how to reason but we had not specified what to reason about. This reflects a gap: runtime reasoning frameworks (ReAct, Chain-of-Thought) have transformed LLM agents, but design-time specification--determining what domain knowledge agents need--remains under-explored. We propose 4D-ARE (4-Dimensional Attribution-Driven Agent Requirements Engineering), a preliminary methodology for specifying attribution-driven agents. The core insight: decision-makers seek attribution, not answers. Attribution concerns organize into four dimensions (Results -> Process -> Support -> Long-term), motivated by Pearl's causal hierarchy. The framework operationalizes through five layers producing artifacts that compile directly to system prompts. We demonstrate the methodology through an industrial pilot deployment in financial services. 4D-ARE addresses what agents should reason about, complementing runtime frameworks that address how. We hypothesize systematic specification amplifies the power of these foundational advances. This paper presents a methodological proposal with preliminary industrial validation; rigorous empirical evaluation is planned for future work.

Front-end development accumulates change after change at the repository level, weaving complex cross-file dependencies that current LLM coding agents tuned for single-shot tasks cannot reliably track across multiple iterations, leading to functional regressions and code that resists maintenance. We argue the missing piece is design knowledge: architectural principles, module responsibilities, and structural constraints that developers lean on to keep code readable, maintainable, and evolvable as a system scales. To operationalize this, we propose WebDesignIter, a framework built around a persistent knowledge graph (WebAppArchKG) that fuses repository structure with design knowledge and keeps both in sync across development cycles. WebDesignIter works in two stages: design-informed planning pulls historical context and architectural overviews from WebAppArchKG to produce an implementation plan with corresponding test scripts, and design-aware generation executes that plan through targeted diff-based patches, validated by sandbox execution and automatic syntax repair. On Web-Bench, WebDesignIter delivers an average Pass@2 gain of 9.55 percentage points across nine foundation models over existing baselines. More importantly, WebDesignIter outperforms every general-purpose coding agent Claude Code, OpenHands, SWE-Agent, Codex CLI on every model configuration, posting the highest Pass@1 and Pass@2 while consuming 2530 fewer input tokens. Ablation singles out design knowledge as the most impactful component: stripping it drops Pass@1 by 11.40 percentage points, a degradation far larger than removing code-graph retrieval, patch-based generation, or sandbox verification, confirming that design knowledge provides a fundamentally more efficient and reliable path to repository-level code generation.

Background. The rapid and growing popularity of machine learning (ML) applications has led to an increasing interest in MLOps, that is, the practice of continuous integration and deployment (CI/CD) of ML-enabled systems. Aims. Since changes may affect not only the code but also the ML model parameters and the data themselves, the automation of traditional CI/CD needs to be extended to manage model retraining in production. Method. In this paper, we present an initial investigation of the MLOps practices implemented in a set of ML-enabled systems retrieved from GitHub, focusing on GitHub Actions and CML, two solutions to automate the development workflow. Results. Our preliminary results suggest that the adoption of MLOps workflows in open-source GitHub projects is currently rather limited. Conclusions. Issues are also identified, which can guide future research work.

Recent advances in Large Language Models (LLMs) have enabled researchers to focus on practical repository-level tasks in software engineering domain. In this work, we consider a cornerstone task for automating work with software repositories-environment setup, i.e., a task of configuring a repository-specific development environment on a system. Existing studies on environment setup introduce innovative agentic strategies, but their evaluation is often based on small datasets that may not capture the full range of configuration challenges encountered in practice. To address this gap, we introduce a comprehensive environment setup benchmark EnvBench. It encompasses 329 Python and 665 JVM-based (Java, Kotlin) repositories, with a focus on repositories that present genuine configuration challenges, excluding projects that can be fully configured by simple deterministic scripts. To enable further benchmark extension and usage for model tuning, we implement two automatic metrics: a static analysis check for missing imports in Python and a compilation check for JVM languages. We demonstrate the applicability of our benchmark by evaluating three environment setup approaches, including a simple zero-shot baseline and two agentic workflows, that we test with two powerful LLM backbones, GPT-4o and GPT-4o-mini. The best approach manages to successfully configure 6.69% repositories for Python and 29.47% repositories for JVM, suggesting that EnvBench remains challenging for current approaches. Our benchmark suite is publicly available at https://github.com/JetBrains-Research/EnvBench. The dataset and experiment trajectories are available at https://jb.gg/envbench.

Continual Learning is an important and challenging problem in machine learning, where models must adapt to a continuous stream of new data without forgetting previously acquired knowledge. While existing frameworks are built on PyTorch, the rising popularity of JAX might lead to divergent codebases, ultimately hindering reproducibility and progress. To address this problem, we introduce SequeL, a flexible and extensible library for Continual Learning that supports both PyTorch and JAX frameworks. SequeL provides a unified interface for a wide range of Continual Learning algorithms, including regularization-based approaches, replay-based approaches, and hybrid approaches. The library is designed towards modularity and simplicity, making the API suitable for both researchers and practitioners. We release SequeL\url{https://github.com/nik-dim/sequel} as an open-source library, enabling researchers and developers to easily experiment and extend the library for their own purposes.

The maintenance risks of open source software (OSS) projects pose significant threats to the quality, security, and resilience of modern software supply chains. While prior research has proposed diverse approaches for predicting OSS maintenance risk -- leveraging signals ranging from surface features (e.g., stars, commits) to social network analyses and behavioral patterns -- existing methods often suffer from ambiguous operational definitions, limited interpretability, and datasets of insufficient scale or generalizability. In this work, we introduce ``maintenance cessation'', grounded in both explicit archival status and rigorous semantic analysis of project documentation. Building on this foundation, we curate a large-scale, longitudinal dataset of 115,466 GitHub repositories -- encompassing 57,733 confirmed cessation events -- complemented by comprehensive, timeline-based behavioral features. We propose an integrated, multi-perspective feature framework for predicting maintenance cessation, systematically combining user-centric features, maintainer-centric features and project evolution features. AFT survival analysis demonstrates a high C-index (0.846), substantially outperforming models relying only on surface features. Feature ablation and SHAP analysis further confirm the effectiveness and interpretability of our approach. Finally, we demonstrate real-world applicability by deploying a GBSA classifier in the openEuler ecosystem for proactive package risk screening. Our work establishes a scalable, interpretable foundation for maintenance-risk prediction, enabling reproducible risk management across large-scale open source ecosystems.

We present a novel framework for Industry 5.0 that simplifies the deployment of AI models on edge devices in various industrial settings. The design reduces latency and avoids external data transfer by enabling local inference and real-time processing. Our implementation is agent-based, which means that individual agents, whether human, algorithmic, or collaborative, are responsible for well-defined tasks, enabling flexibility and simplifying integration. Moreover, our framework supports modular integration and maintains low resource requirements. Preliminary evaluations concerning the food industry in real scenarios indicate improved deployment time and system adaptability performance. The source code is publicly available at https://github.com/AI-REDGIO-5-0/ci-component.

Context: Automated code generation using Foundation Models (FMs) offers promising solutions for enhancing software development efficiency. However, challenges remain in ensuring domain specificity, cost-effectiveness, and security - especially when relying on third-party APIs. This paper introduces CodeLSI, a framework that combines low-rank optimization and domain-specific instruction tuning to address these challenges. Objectives: The aim of this study is to develop and evaluate CodeLSI, a novel approach for generating high-quality code tailored to specific domains, using FMs fine-tuned on company infrastructure without dependence on external APIs. Methods: CodeLSI applies low-rank adaptation techniques to reduce the computational cost of model pre-training and fine-tuning. Domain-specific instruction tuning is employed to align code generation with organizational needs. We implemented and tested the framework on real-world JavaScript coding tasks using datasets drawn from internal software projects. Results: Experimental evaluations show that CodeLSI produces high-quality, context aware code. It outperforms baseline models in terms of relevance, accuracy, and domain fit. The use of low-rank optimization significantly reduced resource requirements, enabling scalable training on company-owned infrastructure. Conclusion: CodeLSI demonstrates that combining low-rank optimization with domain specific tuning can enhance the practicality and performance of FMs for automated code generation. This approach provides a secure, cost-efficient alternative to commercial API based solutions and supports faster, more targeted innovation in software development.

The transition to hydrogen powered transportation requires regionally tailored yet scalable infrastructure planning. This study presents the first Texas specific, multi-period mixed integer optimization model for hydrogen transportation from 2025 to 2050, addressing challenges in infrastructure phasing, asset coordination, and multimodal logistics. The framework introduces three innovations: (1) phased deployment with delayed investment constraints, (2) dynamic modeling of fleet aging and replacement, and (3) a clustering-based hub structure enabling adaptive two-stage hydrogen delivery. Simulations show pipeline deployment supports up to 94.8% of hydrogen flow by 2050 under high demand, reducing transport costs by 23% compared to vehicle-based systems. However, one-year construction delays reduce pipeline coverage by over 60%, shifting reliance to costlier road transport. While the study focuses on Texas, its modular design and adaptable inputs apply to other regions. It provides a tool for policy makers and stakeholders to manage hydrogen transitions under logistical and economic constraints.

Most safety testing efforts for large language models (LLMs) today focus on evaluating foundation models. However, there is a growing need to evaluate safety at the application level, as components such as system prompts, retrieval pipelines, and guardrails introduce additional factors that significantly influence the overall safety of LLM applications. In this paper, we introduce a practical framework for evaluating application-level safety in LLM systems, validated through real-world deployment across multiple use cases within our organization. The framework consists of two parts: (1) principles for developing customized safety risk taxonomies, and (2) practices for evaluating safety risks in LLM applications. We illustrate how the proposed framework was applied in our internal pilot, providing a reference point for organizations seeking to scale their safety testing efforts. This work aims to bridge the gap between theoretical concepts in AI safety and the operational realities of safeguarding LLM applications in practice, offering actionable guidance for safe and scalable deployment.

Coordinating workflows across heterogeneous control systems remains a central challenge in safety-critical environments such as scientific facilities, industrial plants, and energy infrastructures. Language-model-driven agents offer a natural interface for these tasks, but existing approaches often lack scalability, reliability, and human oversight. We introduce the Alpha Berkeley Framework, a production-ready architecture for scalable agentic systems that integrate conversational context with robust tool orchestration. The framework features dynamic capability classification to select only relevant tools per task, a plan-first orchestration model that generates execution plans with explicit dependencies and optional human approval, context-aware task extraction that combines dialogue history with external memory and domain resources, and production-ready execution environments with checkpointing, artifact management, and modular deployment. We demonstrate its versatility through two case studies: a tutorial-style wind farm monitoring example and a deployment at the Advanced Light Source particle accelerator. These results establish Alpha Berkeley as a reliable and transparent framework for agentic systems in high-stakes domains.

Open-Source Software (OSS) vulnerabilities bring great challenges to the software security and pose potential risks to our society. Enormous efforts have been devoted into automated vulnerability detection, among which deep learning (DL)-based approaches have proven to be the most effective. However, the current labeled data present the following limitations: (1) Tangled Patches: Developers may submit code changes unrelated to vulnerability fixes within patches, leading to tangled patches. (2) Lacking Inter-procedural Vulnerabilities: The existing vulnerability datasets typically contain function-level and file-level vulnerabilities, ignoring the relations between functions, thus rendering the approaches unable to detect the inter-procedural vulnerabilities. (3) Outdated Patches: The existing datasets usually contain outdated patches, which may bias the model during training. To address the above limitations, in this paper, we propose an automated data collection framework and construct the first repository-level high-quality vulnerability dataset named ReposVul. The proposed framework mainly contains three modules: (1) A vulnerability untangling module, aiming at distinguishing vulnerability-fixing related code changes from tangled patches, in which the Large Language Models (LLMs) and static analysis tools are jointly employed. (2) A multi-granularity dependency extraction module, aiming at capturing the inter-procedural call relationships of vulnerabilities, in which we construct multiple-granularity information for each vulnerability patch, including repository-level, file-level, function-level, and line-level. (3) A trace-based filtering module, aiming at filtering the outdated patches, which leverages the file path trace-based filter and commit time trace-based filter to construct an up-to-date dataset.

The rapid proliferation of LLM agent frameworks has forced developers to choose between vendor lock-in through provider-specific SDKs and complex multi-package ecosystems that obscure control flow and hinder reproducibility. Integrating tool calling across multiple LLM providers remains a core engineering challenge due to fragmented APIs, incompatible message formats, and inconsistent streaming and tool-calling behavior, making it difficult to build portable, reliable agent systems. We introduce Orchestral, a lightweight Python framework that provides a unified, type-safe interface for building LLM agents across major providers while preserving the simplicity required for scientific computing and production deployment. Orchestral defines a single universal representation for messages, tools, and LLM usage that operates seamlessly across providers, eliminating manual format translation and reducing framework-induced complexity. Automatic tool schema generation from Python type hints removes the need for handwritten descriptors while maintaining type safety across provider boundaries. A synchronous execution model with streaming support enables deterministic behavior, straightforward debugging, and real-time interaction without introducing server dependencies. The framework's modular architecture cleanly separates provider integration, tool execution, conversation orchestration, and user-facing interfaces, enabling extensibility without architectural entanglement. Orchestral supports advanced agent capabilities found in larger frameworks, including rich tool calling, context compaction, workspace sandboxing, user approval workflows, sub-agents, memory management, and MCP integration.

The pervasive role played by software in virtually all industries has fostered ever-increasing development of applied research in software engineering. In this chapter, we contribute our experience in using the V-Model as a framework for teaching how to conduct applied research in empirical software engineering. The foundational idea of using the V-Model is presented, and guidance for using it to frame the research is provided. Furthermore, we show how the framework has been instantiated throughout nearly two decades of PhD theses done at the University of Kaiserslautern (RPTU Kaiserslautern) in partnership with Fraunhofer IESE, including the most frequent usage patterns, how the different empirical methods fit into the framework, and the lessons we have learned from this experience.

The rapid growth in the use of Large Language Models (LLMs) and AI Agents as part of software development and deployment is revolutionizing the information technology landscape. While code generation receives significant attention, a higher-impact application lies in using AI agents for operational resilience of cloud services, which currently require significant human effort and domain knowledge. There is a growing interest in AI for IT Operations (AIOps) which aims to automate complex operational tasks, like fault localization and root cause analysis, thereby reducing human intervention and customer impact. However, achieving the vision of autonomous and self-healing clouds though AIOps is hampered by the lack of standardized frameworks for building, evaluating, and improving AIOps agents. This vision paper lays the groundwork for such a framework by first framing the requirements and then discussing design decisions that satisfy them. We also propose AIOpsLab, a prototype implementation leveraging agent-cloud-interface that orchestrates an application, injects real-time faults using chaos engineering, and interfaces with an agent to localize and resolve the faults. We report promising results and lay the groundwork to build a modular and robust framework for building, evaluating, and improving agents for autonomous clouds.

The post-training phase of large language models is essential for enhancing capabilities such as instruction-following, reasoning, and alignment with human preferences. However, it demands extensive high-quality data and poses risks like overfitting, alongside significant computational costs due to repeated post-training and evaluation after each base model update. This paper introduces ParamΔ, a novel method that streamlines post-training by transferring knowledge from an existing post-trained model to a newly updated base model with ZERO additional training. By computing the difference between post-trained model weights (Θ_post) and base model weights (Θ_base), and adding this to the updated base model (Θ'_base), we define ParamΔ Model as: Θ_{ParamΔ} = Θ_post - Θ_base + Θ'_base. This approach surprisingly equips the new base model with post-trained capabilities, achieving performance comparable to direct post-training. We did analysis on LLama3, Llama3.1, Qwen, and DeepSeek-distilled models. Results indicate ParamΔ Model effectively replicates traditional post-training. For example, the ParamΔ Model obtained from 70B Llama3-inst, Llama3-base, Llama3.1-base models attains approximately 95\% of Llama3.1-inst model's performance on average. ParamΔ brings a new perspective on how to fully leverage models in the open-weight community, where checkpoints for base and instruct models are readily available and frequently updated, by providing a cost-free framework to accelerate the iterative cycle of model development.

Foundation models are moving from response generation into operational roles. They plan across steps, call tools, request human input, coordinate with other agents, and increasingly carry responsibility for work that affects customers, claims, code, contracts, and clinical decisions. Production deployments are no longer one human supervising one model. They are multi-human, multi-agent collaborations that cross teams, time zones, and trust boundaries. The technical surface for this collaboration remains weakly specified. When an agent drafts a response and a human edits it before it ships, the moment of human judgement is the most valuable signal in the system. In current practice it is recorded, if at all, in application code, chat threads, ticket comments, and tribal memory. Two protocol standards address adjacent concerns: MCP standardises agent access to tools and data, and A2A standardises agent-to-agent interoperability. Neither defines the shared workspace in which humans and agents perform accountable work together. This paper presents CHAP, the Collaborative Human-Agent Protocol. Under CHAP, the override that used to vanish into a chat thread becomes a structured event carrying a diff, a rationale, and a content hash. The handoff between shifts becomes a portable envelope rather than a pinned message. The human approval of an agent's draft becomes a non-repudiable signed decision that can be replayed years later. The protocol achieves this through a small Core (workspaces, participants, tasks, artefacts, and an append-only evidence log) together with composable profiles that add review, modes, routing, deliberation, handoff, identity, signatures, and transparency-backed audit as deployments require them. Specification, reference implementation, conformance suite, and worked examples are available at: https://github.com/BrightbeamAI/chap

Modern software systems like the Linux kernel are among the world's largest and most intricate codebases, continually evolving with new features and increasing complexity. Understanding these systems poses significant challenges due to their scale and the unstructured nature of development artifacts such as commits and mailing list discussions. We introduce Code-Survey, the first LLM-driven methodology designed to systematically explore and analyze large-scale codebases. The central principle behind Code-Survey is to treat LLMs as human participants, acknowledging that software development is also a social activity and thereby enabling the application of established social science techniques. By carefully designing surveys, Code-Survey transforms unstructured data, such as commits, emails, into organized, structured, and analyzable datasets. This enables quantitative analysis of complex software evolution and uncovers valuable insights related to design, implementation, maintenance, reliability, and security. To demonstrate the effectiveness of Code-Survey, we apply it to the Linux kernel's eBPF subsystem. We construct the Linux-bpf dataset, comprising over 670 features and 16,000 commits from the Linux community. Our quantitative analysis uncovers important insights into the evolution of eBPF, such as development patterns, feature interdependencies, and areas requiring attention for reliability and security. The insights have been initially validated by eBPF experts. Furthermore, Code-Survey can be directly applied to other subsystems within Linux and to other large-scale software projects. By providing a versatile tool for systematic analysis, Code-Survey facilitates a deeper understanding of complex software systems, enabling improvements across a variety of domains and supporting a wide range of empirical studies. The code and dataset is open-sourced.

As frontier language models advance, policymakers and model developers need methods for assessing whether model access materially increases a non-expert actor's ability to plan high-consequence Chemical, Biological, Radiological, or Nuclear (CBRN) misuse relative to public tools alone. Existing CBRN evaluations differ in non-expert definitions, threat scope, baselines, scoring rubrics, and decision rules, making results difficult to compare across studies. We introduce a Threshold Exceedance Criteria (TEC) framework that decomposes an uplift study into independently executable components: determining non-expert participant eligibility, defining the CBRN threat scope for the study, and statistically estimating material uplift. We then operationalize the TEC framework in a large-scale empirical study using a design that determines two forms of uplift: generative (where a model assists plan creation from scratch) and revisionist (where a model assists refinement of an existing plan). The study produced attack plans across the CBRN domains, which we evaluated through subject-matter-expert review to estimate generative and revisionist uplift. Applying the framework, our empirical study revealed domain heterogeneity: under this controlled pre-release evaluation, model-assisted plans sometimes received expert-equivalent instructional ratings, but confirmed material uplift was limited to the radiological domain. These findings informed mitigation and deployment-governance decisions rather than characterizing deployed model behavior. We conclude with methodological lessons for future CBRN uplift evaluations, emphasizing prespecified criteria, explicit baselines, separation of generative and revisionist estimates, and careful distinction between preliminary screening signals and confirmed risk determinations.

Code completion has become an essential tool for daily software development. Existing evaluation benchmarks often employ static methods that do not fully capture the dynamic nature of real-world coding environments and face significant challenges, including limited context length, reliance on superficial evaluation metrics, and potential overfitting to training datasets. In this work, we introduce a novel framework for enhancing code completion in software development through the creation of a repository-level benchmark ExecRepoBench and the instruction corpora Repo-Instruct, aim at improving the functionality of open-source large language models (LLMs) in real-world coding scenarios that involve complex interdependencies across multiple files. ExecRepoBench includes 1.2K samples from active Python repositories. Plus, we present a multi-level grammar-based completion methodology conditioned on the abstract syntax tree to mask code fragments at various logical units (e.g. statements, expressions, and functions). Then, we fine-tune the open-source LLM with 7B parameters on Repo-Instruct to produce a strong code completion baseline model Qwen2.5-Coder-Instruct-C based on the open-source model. Qwen2.5-Coder-Instruct-C is rigorously evaluated against existing benchmarks, including MultiPL-E and ExecRepoBench, which consistently outperforms prior baselines across all programming languages. The deployment of can be used as a high-performance, local service for programming development\url{https://execrepobench.github.io/}.

AI for IT Operations (AIOps) aims to automate complex operational tasks, such as fault localization and root cause analysis, to reduce human workload and minimize customer impact. While traditional DevOps tools and AIOps algorithms often focus on addressing isolated operational tasks, recent advances in Large Language Models (LLMs) and AI agents are revolutionizing AIOps by enabling end-to-end and multitask automation. This paper envisions a future where AI agents autonomously manage operational tasks throughout the entire incident lifecycle, leading to self-healing cloud systems, a paradigm we term AgentOps. Realizing this vision requires a comprehensive framework to guide the design, development, and evaluation of these agents. To this end, we present AIOPSLAB, a framework that not only deploys microservice cloud environments, injects faults, generates workloads, and exports telemetry data but also orchestrates these components and provides interfaces for interacting with and evaluating agents. We discuss the key requirements for such a holistic framework and demonstrate how AIOPSLAB can facilitate the evaluation of next-generation AIOps agents. Through evaluations of state-of-the-art LLM agents within the benchmark created by AIOPSLAB, we provide insights into their capabilities and limitations in handling complex operational tasks in cloud environments.

Self-improving autonomous agents are moving from research prototypes to deployed systems. The primary goal is controllable evolution, or adaptation, from experience with minimal or even no human input. This survey frames modern self-improving agents as adaptive systems that convert experience into accumulated capability gains. We offer a system-level framework that represents a modern agent as a configuration coupling a foundation model with an operational scaffold of prompts, memory, tools, and control logic. Within this framework, self-improvement is formalized as a self-induced update operator that obtains and commits updates to model parameters or scaffold components. We organize prior work by update target and by the signals that drive change, then review applications and discuss evaluation, before closing with open problems and future directions. For convenience, we track technical updates on https://github.com/selfimproving-agent/awesome-Self-Improving-Agents.

Continual post-training (CPT) is a popular and effective technique for adapting foundation models like multimodal large language models to specific and ever-evolving downstream tasks. While existing research has primarily concentrated on methods like data replay, model expansion, or parameter regularization, the fundamental role of the learning paradigm within CPT remains largely unexplored. This paper presents a comparative analysis of two core post-training paradigms: supervised fine-tuning (SFT) and reinforcement fine-tuning (RFT), investigating their respective impacts on knowledge retention during CPT. Our experiments are conducted on a benchmark comprising seven diverse multimodal tasks, utilizing Qwen2.5-VL-7B-Instruct as the base model for continual post-training. The investigation yields two significant findings: (1) When continuously learning on downstream tasks, SFT leads to catastrophic forgetting of previously learned tasks. In contrast, RFT inherently preserves prior knowledge and achieve performance comparable to multi-task training. (2) RFT successfully protects and even enhances the model's general knowledge on standard benchmarks (e.g., MMMU and MMLU-Pro). Conversely, SFT degrades general model capabilities severely. Further analysis shows that explicit mechanisms, such as KL penalty and chain-of-thought reasoning, are not the primary factors. Instead, we find that the implicit regularization inherent to RFT is a key factor in mitigating forgetting. Finally, we propose a rollout-based instance filtering algorithm to improve the stability and efficiency of RFT. Our comprehensive study demonstrates the superiority of RFT as a robust paradigm for continual post-training.

Large Language Models(LLMs) have dramatically revolutionized the field of Natural Language Processing(NLP), offering remarkable capabilities that have garnered widespread usage. However, existing interaction paradigms between LLMs and users are constrained by either inflexibility, limitations in customization, or a lack of persistent learning. This inflexibility is particularly evident as users, especially those without programming skills, have restricted avenues to enhance or personalize the model. Existing frameworks further complicate the model training and deployment process due to their computational inefficiencies and lack of user-friendly interfaces. To overcome these challenges, this paper introduces a novel interaction paradigm-'Online Training using External Interactions'-that merges the benefits of persistent, real-time model updates with the flexibility for individual customization through external interactions such as AI agents or online/offline knowledge bases.

This position paper argues that the machine learning community should prioritize early-stage quality assurance in annotation pipelines over the prevailing practice of late-stage validation. Data quality bottlenecks increasingly limit foundation model improvement, yet quality assurance research focuses almost exclusively on validation methods rather than validation timing. When validation occurs, not merely what methods are employed, fundamentally determines both error rates and annotation costs. This temporal neglect is puzzling given the well-established "shift-left" principle from software engineering, where empirical studies demonstrate 4--100x cost multipliers for defects detected in later stages (Boehm, 1981; Shull et al., 2002). Annotation pipelines exhibit analogous dynamics: errors caught before annotation begins cost a fraction of those discovered after review cycles complete. We propose a taxonomy of three QA trigger points, namely pre-annotation (T0), post-annotation (T1), and post-review (T2), that decompose annotation workflows into discrete validation opportunities. A parametric error-propagation model formalizes when timing affects final error rates versus only economics, making timing a measurable design variable rather than a configuration afterthought. A survey of 47 recent papers reveals that only 4% report when validation occurs, a striking gap given timing's demonstrated impact in adjacent fields. Without explicit attention to QA timing, the community risks optimizing validation methods while ignoring the structural variable that may matter most. Acting on this position requires three steps: researchers should report QA timing configurations alongside validation methods; annotation platforms should expose timing as a first-class parameter; and the community should run controlled experiments that measure stage-specific detection rates directly.

We present JAttack, a framework that enables template-based testing for compilers. Using JAttack, a developer writes a template program that describes a set of programs to be generated and given as test inputs to a compiler. Such a framework enables developers to incorporate their domain knowledge on testing compilers, giving a basic program structure that allows for exploring complex programs that can trigger sophisticated compiler optimizations. A developer writes a template program in the host language (Java) that contains holes to be filled by JAttack. Each hole, written using a domain-specific language, constructs a node within an extended abstract syntax tree (eAST). An eAST node defines the search space for the hole, i.e., a set of expressions and values. JAttack generates programs by executing templates and filling each hole by randomly choosing expressions and values (available within the search space defined by the hole). Additionally, we introduce several optimizations to reduce JAttack's generation cost. While JAttack could be used to test various compiler features, we demonstrate its capabilities in helping test just-in-time (JIT) Java compilers, whose optimizations occur at runtime after a sufficient number of executions. Using JAttack, we have found six critical bugs that were confirmed by Oracle developers. Four of them were previously unknown, including two unknown CVEs (Common Vulnerabilities and Exposures). JAttack shows the power of combining developers' domain knowledge (via templates) with random testing to detect bugs in JIT compilers.

The advancement of Large Language Model (LLM)-powered agents has enabled automated task processing through reasoning and tool invocation capabilities. However, existing frameworks often operate under the idealized assumption that tool executions are invariably successful, relying solely on textual descriptions that fail to distinguish precise performance boundaries and cannot adapt to iterative tool updates. This gap introduces uncertainty in planning and execution, particularly in domains like visual content generation (AIGC), where nuanced tool performance significantly impacts outcomes. To address this, we propose PerfGuard, a performance-aware agent framework for visual content generation that systematically models tool performance boundaries and integrates them into task planning and scheduling. Our framework introduces three core mechanisms: (1) Performance-Aware Selection Modeling (PASM), which replaces generic tool descriptions with a multi-dimensional scoring system based on fine-grained performance evaluations; (2) Adaptive Preference Update (APU), which dynamically optimizes tool selection by comparing theoretical rankings with actual execution rankings; and (3) Capability-Aligned Planning Optimization (CAPO), which guides the planner to generate subtasks aligned with performance-aware strategies. Experimental comparisons against state-of-the-art methods demonstrate PerfGuard's advantages in tool selection accuracy, execution reliability, and alignment with user intent, validating its robustness and practical utility for complex AIGC tasks. The project code is available at https://github.com/FelixChan9527/PerfGuard.

Proactive interventions by LLM critic models are often assumed to improve reliability, yet their effects at deployment time are poorly understood. We show that a binary LLM critic with strong offline accuracy (AUROC 0.94) can nevertheless cause severe performance degradation, inducing a 26 percentage point (pp) collapse on one model while affecting another by near zero pp. This variability demonstrates that LLM critic accuracy alone is insufficient to determine whether intervention is safe. We identify a disruption-recovery tradeoff: interventions may recover failing trajectories but also disrupt trajectories that would have succeeded. Based on this insight, we propose a pre-deployment test that uses a small pilot of 50 tasks to estimate whether intervention is likely to help or harm, without requiring full deployment. Across benchmarks, the test correctly anticipates outcomes: intervention degrades performance on high-success tasks (0 to -26 pp), while yielding a modest improvement on the high-failure ALFWorld benchmark (+2.8 pp, p=0.014). The primary value of our framework is therefore identifying when not to intervene, preventing severe regressions before deployment.

Deploying foundation models in embodied edge systems is fundamentally a systems problem, not just a problem of model compression. Real-time control must operate within strict size, weight, and power constraints, where memory traffic, compute latency, timing variability, and safety margins interact directly. The Deployment Gauntlet organizes these constraints into eight coupled barriers that determine whether embodied foundation models can run reliably in practice. Across representative edge workloads, autoregressive Vision-Language-Action policies are constrained primarily by memory bandwidth, whereas diffusion-based controllers are limited more by compute latency and sustained execution cost. Reliable deployment therefore depends on system-level co-design across memory, scheduling, communication, and model architecture, including decompositions that separate fast control from slower semantic reasoning.

We introduce LiteWebAgent, an open-source suite for VLM-based web agent applications. Our framework addresses a critical gap in the web agent ecosystem with a production-ready solution that combines minimal serverless backend configuration, intuitive user and browser interfaces, and extensible research capabilities in agent planning, memory, and tree search. For the core LiteWebAgent agent framework, we implemented a simple yet effective baseline using recursive function calling, providing with decoupled action generation and action grounding. In addition, we integrate advanced research components such as agent planning, agent workflow memory, and tree search in a modular and extensible manner. We then integrate the LiteWebAgent agent framework with frontend and backend as deployed systems in two formats: (1) a production Vercel-based web application, which provides users with an agent-controlled remote browser, (2) a Chrome extension leveraging LiteWebAgent's API to control an existing Chrome browser via CDP (Chrome DevTools Protocol). The LiteWebAgent framework is available at https://github.com/PathOnAI/LiteWebAgent, with deployed frontend at https://lite-web-agent.vercel.app/.

Software testing is a critical aspect of software development, yet generating test cases remains a routine task for engineers. This paper presents a benchmark, CLOVER, to evaluate models' capabilities in generating and completing test cases under specific conditions. Spanning from simple assertion completions to writing test cases that cover specific code blocks across multiple files, these tasks are based on 12 python repositories, analyzing 845 problems with context lengths ranging from 4k to 128k tokens. Utilizing code testing frameworks, we propose a method to construct retrieval contexts using coverage information. While models exhibit comparable performance with short contexts, notable differences emerge with 16k contexts. Notably, models like GPT-4o and Claude 3.5 can effectively leverage relevant snippets; however, all models score below 35\% on the complex Task III, even with the oracle context provided, underscoring the benchmark's significance and the potential for model improvement. The benchmark is containerized for code execution across tasks, and we will release the code, data, and construction methodologies.

Building deployment-ready LLM agents requires complex orchestration of tools, data sources, and control flow logic, yet existing systems tightly couple agent logic to specific programming languages and deployment models. We present a declarative system that separates agent workflow specification from implementation, enabling the same pipeline definition to execute across multiple backend languages (Java, Python, Go) and deployment environments (cloud-native, on-premises). Our key insight is that most agent workflows consist of common patterns -- data serialization, filtering, RAG retrieval, API orchestration -- that can be expressed through a unified DSL rather than imperative code. This approach transforms agent development from application programming to configuration, where adding new tools or fine-tuning agent behaviors requires only pipeline specification changes, not code deployment. Our system natively supports A/B testing of agent strategies, allowing multiple pipeline variants to run on the same backend infrastructure with automatic metric collection and comparison. We evaluate our approach on real-world e-commerce workflows at PayPal, processing millions of daily interactions. Our results demonstrate 60% reduction in development time, and 3x improvement in deployment velocity compared to imperative implementations. The language's declarative approach enables non-engineers to modify agent behaviors safely, while maintaining sub-100ms orchestration overhead. We show that complex workflows involving product search, personalization, and cart management can be expressed in under 50 lines of DSL compared to 500+ lines of imperative code.

While knowledge distillation (transfer) has been attracting attentions from the research community, the recent development in the fields has heightened the need for reproducible studies and highly generalized frameworks to lower barriers to such high-quality, reproducible deep learning research. Several researchers voluntarily published frameworks used in their knowledge distillation studies to help other interested researchers reproduce their original work. Such frameworks, however, are usually neither well generalized nor maintained, thus researchers are still required to write a lot of code to refactor/build on the frameworks for introducing new methods, models, datasets and designing experiments. In this paper, we present our developed open-source framework built on PyTorch and dedicated for knowledge distillation studies. The framework is designed to enable users to design experiments by declarative PyYAML configuration files, and helps researchers complete the recently proposed ML Code Completeness Checklist. Using the developed framework, we demonstrate its various efficient training strategies, and implement a variety of knowledge distillation methods. We also reproduce some of their original experimental results on the ImageNet and COCO datasets presented at major machine learning conferences such as ICLR, NeurIPS, CVPR and ECCV, including recent state-of-the-art methods. All the source code, configurations, log files and trained model weights are publicly available at https://github.com/yoshitomo-matsubara/torchdistill .

Modern web dashboards and enterprise applications increasingly rely on complex, distributed microservices architectures. While these architectures offer scalability, they introduce significant challenges in debugging and observability. When failures occur, they often manifest as opaque error messages to the end-user such as Something went wrong. This masks the underlying root cause which may reside in browser side exceptions, API contract violations, or server side logic failures. Existing monitoring tools capture these events in isolation but fail to correlate them effectively or provide intelligible explanations to non technical users. This paper proposes a novel system for Automated Multi Source Debugging and Natural Language Error Explanation. The proposed framework automatically collects and correlates error data from disparate sources such as browser, API, server logs and validates API contracts in real time, and utilizes Large Language Models to generate natural language explanations. This approach significantly reduces Mean Time to Resolution for support engineers and improves the user experience by transforming cryptic error codes into actionable insights.

The emergence of "vibe coding" platforms, where users describe applications in natural language and AI agents autonomously generate full-stack software, has created a need for rigorous evaluation beyond code-level benchmarks. In order to assess them as virtual software development agencies on understanding business requirements, making architectural decisions, writing production code, handling iterative modifications, and maintaining business readiness, we introduce SWE-WebDev Bench, a 68-metric evaluation framework spanning 25 primary and 43 diagnostic metrics across seven groups, organized along three dimensions: Interaction Mode (App Creation Request (ACR) vs. App Modification Request (AMR)), Agency Angle (Product Manager (PM), Engineering, Ops), and Complexity Tier (T4 multi-role SaaS, T5 AI-native). Our evaluation (six platforms, three domains, 18 evaluation cells) reveals four recurring shortcomings in the current generation of AI app builders: (1) A specification bottleneck, where platforms compress rich business requirements into oversimplified technical plans, (2) A pervasive frontend-backend decoupling, where visually polished UIs mask absent or broken backend infrastructure, (3) A steep production-readiness cliff, where no platform scores above 60% on engineering quality and post-generation human effort varies substantially across platforms and (4) Widespread security and infrastructure failures, with no platform exceeding 65% Security Score against a 90% target and concurrency handling as low as 6%. These observations are descriptive of our sample and require larger-scale replication to establish generality. We release SWE-WebDev Bench as a community benchmark to enable such replication and help platform builders identify and address these gaps. Code and benchmark resources are available at: https://github.com/snowmountainAi/webdevbench and https://webdevbench.com/.

The rise of AI coding assistants has reignited interest in an old idea: what if specifications-not code-were the primary artifact of software development? Spec-driven development (SDD) inverts the traditional workflow by treating specifications as the source of truth and code as a generated or verified secondary artifact. This paper provides practitioners with a comprehensive guide to SDD, covering its principles, workflow patterns, and supporting tools. We present three levels of specification rigor-spec-first, spec-anchored, and spec-as-source-with clear guidance on when each applies. Through analysis of tools ranging from Behavior-Driven Development frameworks to modern AI-assisted toolkits like GitHub Spec Kit, we demonstrate how the spec-first philosophy maps to real implementations. We present case studies from API development, enterprise systems, and embedded software, illustrating how different domains apply SDD. We conclude with a decision framework helping practitioners determine when SDD provides value and when simpler approaches suffice.

Generative AI release decisions determine whether system components are made available, but release does not address many other elements that change how users and stakeholders are able to engage with a system. Beyond release, access to system components informs potential risks and benefits. Access refers to practical needs, infrastructurally, technically, and societally, in order to use available components in some way. We deconstruct access along three axes: resourcing, technical usability, and utility. Within each category, a set of variables per system component clarify tradeoffs. For example, resourcing requires access to computing infrastructure to serve model weights. We also compare the accessibility of four high performance language models, two open-weight and two closed-weight, showing similar considerations for all based instead on access variables. Access variables set the foundation for being able to scale or increase access to users; we examine the scale of access and how scale affects ability to manage and intervene on risks. This framework better encompasses the landscape and risk-benefit tradeoffs of system releases to inform system release decisions, research, and policy.

With the rapid development of large language models (LLMs), distributed training and inference frameworks like DeepSpeed have become essential for scaling model training and inference across multiple GPUs or nodes. However, the increasing complexity of these frameworks brings non-trivial software bugs, which may degrade training performance, cause unexpected failures, and result in significant resource waste. Understanding framework bugs' characteristics is fundamental for quality assurance, allowing the design of more effective debugging and repair methods. Thus, our paper conducts the first large-scale empirical analysis of 308 fixed bugs across three popular distributed training/inference frameworks: DeepSpeed, Megatron-LM, and Colossal-AI. We examine bug symptoms, root causes, bug identification and fixing efforts, and common low-effort fixing strategies. Additionally, the distributed nature of these frameworks introduces unique bug root causes, such as allocation strategy error and distributed communication error. Diagnosing and fixing complex bugs remains challenging due to factors like the disconnect between symptoms and root causes, high bug reproduction costs, and low-level or cross-component interactions. Interestingly, we observe that 48% of bug fixes require minimal code changes (<=10 LOC) and follow simple strategies such as conditional logic optimization, parameter handling enhancement, or version compatibility handling, indicating potential for automation. Based on these insights, we offer several implications for improving the reliability of both distributed training and inference frameworks and their dependent LLM projects, while also identifying opportunities to leverage LLM-based tools for automated debugging and repair.

This study presents a hybrid framework for predicting movie success. The framework integrates multi-task learning (MTL), GPT-based sentiment analysis, and Susceptible-Infected-Recovered (SIR) propagation modeling. The study examines limitations in existing approaches. It models static production attributes, information dissemination, and audience sentiment at the same time. The framework uses 5,840 films from 2004 to 2024 and approximate 300,000 user reviews. It shows predictive performance with classification accuracy of 0.964 and regression metrics of MAE 0.388. Ablation analysis indicates component interactions. Selective feature combinations perform better than the comprehensive model. This result questions assumptions about feature integration. The model shows virality patterns between successful and unsuccessful films. Innovations include epidemiological modeling for information diffusion, multidimensional sentiment features from GPT-based analysis, and a shared representation architecture that optimizes multiple success metrics. The framework provides applications in the film production lifecycle. It also contributes to understanding how audience engagement leads to commercial outcomes.

Coding agents can generate web applications from natural-language descriptions, yet a recent benchmark study shows that generated applications fail to meet functional requirements in over 70% of cases. The core difficulty is that web correctness cannot be assessed from source files or terminal output: the application must be deployed, exercised through simulated browser interactions, and failures must be translated into actionable repair signals -- steps that current agents cannot perform without human mediation. We present TDDev, a framework that automates this closed loop through three stages: (1) converting high-level requirements into structured acceptance tests before any code is written, (2) deploying the application and validating it through browser-based interaction simulation, and (3) translating browser-observed failures into structured repair reports for the coding agent. Enabled by TDDev, we conduct the first controlled empirical study of Test-driven development (TDD) strategies for web application generation, comparing four development protocols across two coding agents, two backbone models, and two benchmarks. TDD infrastructure consistently improves generation quality by 34--48 percentage points over a no-TDD baseline. The central finding is that the optimal protocol depends on the model's generation style: models that build applications holistically benefit most from agentic enforcement, while models that extend code conservatively benefit from incremental enforcement. Mismatching protocol to generation style eliminates the TDD benefit entirely while multiplying token cost up to 25-fold. A user study confirms that TDDev reduces manual developer intervention to zero, shifting the workload from continuous prompt engineering to autonomous, feedback-driven refinement.

ECG foundation models are increasingly popular due to their adaptability across various tasks. However, their clinical applicability is often limited by performance gaps compared to task-specific models, even after pre-training on large ECG datasets and fine-tuning on target data. This limitation is likely due to the lack of an effective post-training strategy. In this paper, we propose a simple yet effective post-training approach to enhance ECG foundation models. We evaluate it on a publicly available Transformer-based foundation model. Experiments across multiple ECG tasks show that our method consistently outperforms baseline fine-tuning. On the PTB-XL benchmarks, it improves macro AUROC by 0.7%-8.9% and macro AUPRC by 23.3%-77.9%, also outperforming several recent state-of-the-art approaches, including task-specific and advanced architectures. Further analyses demonstrate improved training dynamics and data efficiency, with only 30% of the training data outperforming the baseline trained on the full dataset. Ablation studies highlight the importance of stochastic depth and preview linear probing. These findings underscore the potential of post-training strategies to improve ECG foundation models, and we hope this work will contribute to the continued development of foundation models in the ECG domain.

Post-training (via supervised fine-tuning) improves instruction-following, but often induces semantic mode collapse by biasing models toward low-entropy fine-tuning data at the expense of the high-entropy pretraining distribution. Crucially, we find this trade-off worsens with scale. To close this semantic diversity gap, we propose annotation-anchored training, a principled method that enables models to adopt the preference-following behaviors of post-training without sacrificing the inherent diversity of pretraining. Our approach is simple: we pretrain on documents paired with semantic annotations, inducing a rich annotation distribution that reflects the full breadth of pretraining data, and we preserve this distribution during post-training. This lets us sample diverse annotations at inference time and use them as anchors to guide generation, effectively transferring pretraining's semantic richness into post-trained models. We find that models trained with annotation-anchored training can attain 6 times less diversity collapse than models trained with SFT, and improve with scale.

This paper introduces the open-source dataset WanJuanSiLu, designed to provide high-quality training corpora for low-resource languages, thereby advancing the research and development of multilingual models. To achieve this, we have developed a systematic data processing framework tailored for low-resource languages. This framework encompasses key stages such as data extraction, corpus cleaning, content deduplication, security filtering, quality evaluation, and theme classification. Through the implementation of this framework, we have significantly improved both the quality and security of the dataset, while maintaining its linguistic diversity. As of now, data for all five languages have been fully open-sourced. The dataset can be accessed at https://opendatalab.com/applyMultilingualCorpus, and GitHub repository is available at https://github.com/opendatalab/WanJuan3.0

Software architecture research relies on key architectural artifacts -- Software Architectures, Reference Architectures, and Architectural Frameworks -- that underpin the design and analysis of complex systems. Evaluating these artifacts is essential to assess tradeoffs and risks affecting quality attributes such as performance, modifiability, and security. Although methodologies like the Architecture Tradeoff Analysis Method (ATAM) support software architecture evaluation, their industrial focus misaligns with the IMRaD (Introduction, Methods, Results, Discussion) format prevalent in academic research, impeding transparency and reproducibility. Our prior work introduced the Architecture Tradeoff and Risk Analysis Framework (ATRAF), extending ATAM through three methods -- ATRAM, RATRAM, and AFTRAM, addressing all abstraction levels, using a unified, iterative four-phase spiral model. These phases -- Scenario and Requirements Gathering, Architectural Views and Scenario Realization, Attribute-Specific Analyses, and Sensitivity, Tradeoff, and Risk Analysis -- ensure traceability and coherence. This paper presents the ATRAF-driven IMRaD Methodology, a concise method to align ATRAF's phases with IMRaD sections. This methodology enhances the rigor, transparency, and accessibility of software architecture research, enabling systematic reporting of complex evaluations.

Foundation model (FM)-based AI agents are rapidly gaining adoption across diverse domains, but their inherent non-determinism and non-reproducibility pose testing and quality assurance challenges. While recent benchmarks provide task-level evaluations, there is limited understanding of how developers verify the internal correctness of these agents during development. To address this gap, we conduct the first large-scale empirical study of testing practices in the AI agent ecosystem, analyzing 39 open-source agent frameworks and 439 agentic applications. We identify ten distinct testing patterns and find that novel, agent-specific methods like DeepEval are seldom used (around 1%), while traditional patterns like negative and membership testing are widely adapted to manage FM uncertainty. By mapping these patterns to canonical architectural components of agent frameworks and agentic applications, we uncover a fundamental inversion of testing effort: deterministic components like Resource Artifacts (tools) and Coordination Artifacts (workflows) consume over 70% of testing effort, while the FM-based Plan Body receives less than 5%. Crucially, this reveals a critical blind spot, as the Trigger component (prompts) remains neglected, appearing in around 1% of all tests. Our findings offer the first empirical testing baseline in FM-based agent frameworks and agentic applications, revealing a rational but incomplete adaptation to non-determinism. To address it, framework developers should improve support for novel testing methods, application developers must adopt prompt regression testing, and researchers should explore barriers to adoption. Strengthening these practices is vital for building more robust and dependable AI agents.

Domain-adaptive post-training of large language models (LLMs) has emerged as a promising approach for specialized domains such as medicine and finance. However, significant challenges remain in identifying optimal adaptation criteria and training strategies across varying data and model configurations. To address these challenges, we introduce FINDAP, a systematic and fine-grained investigation into domain-adaptive post-training of LLMs for the finance domain. Our approach begins by identifying the core capabilities required for the target domain and designing a comprehensive evaluation suite aligned with these needs. We then analyze the effectiveness of key post-training stages, including continual pretraining, instruction tuning, and preference alignment. Building on these insights, we propose an effective training recipe centered on a novel preference data distillation method, which leverages process signals from a generative reward model. The resulting model, Llama-Fin, achieves state-of-the-art performance across a wide range of financial tasks. Our analysis also highlights how each post-training stage contributes to distinct capabilities, uncovering specific challenges and effective solutions, providing valuable insights for domain adaptation of LLMs. Project page: https://github.com/SalesforceAIResearch/FinDap

Executable software engineering data is valuable for training SWE agents, but scaling it remains difficult for two reasons: only a small fraction of real repository changes yield verifiable, high-signal task instances, and naively building repository-specific environments quickly becomes the dominant systems cost. We present SWE-Next, an execution-grounded framework for scalable SWE task and trajectory collection. On the data side, SWE-Next mines real merged pull requests, executes candidate base/merged commit pairs, and retains only those that produce strict test improvements without regressions, yielding self-verifying instances. It also applies strict submission gating so that collected trajectories remain evidence-driven rather than speculative. On the systems side, SWE-Next introduces reusable repo-quarter profiles, which reuse the same environment across nearby commits in time while keeping each task run separate and reproducible. Using only 30 hours and 639GB of environment storage, SWE-Next processes 3,971 seed repositories and 102,582 candidate commit pairs mined from real merged PRs to construct a dataset of 2,308 self-verifying instances. Experiments show that SWE-Next improves downstream pass@1 with fewer or comparable training trajectories, indicating that its gains come not from a stronger trajectory generator, but from higher-signal execution-grounded supervision and more efficient data collection.

The automation of scientific discovery represents a critical milestone in Artificial Intelligence (AI) research. However, existing agentic systems for science suffer from two fundamental limitations: rigid, pre-programmed workflows that cannot adapt to intermediate findings, and inadequate context management that hinders long-horizon research. We present freephdlabor, an open-source multiagent framework featuring fully dynamic workflows determined by real-time agent reasoning and a \textit{modular architecture} enabling seamless customization -- users can modify, add, or remove agents to address domain-specific requirements. The framework provides comprehensive infrastructure including automatic context compaction, workspace-based communication to prevent information degradation, memory persistence across sessions, and non-blocking human intervention mechanisms. These features collectively transform automated research from isolated, single-run attempts into continual research programs that build systematically on prior explorations and incorporate human feedback. By providing both the architectural principles and practical implementation for building customizable co-scientist systems, this work aims to facilitate broader adoption of automated research across scientific domains, enabling practitioners to deploy interactive multiagent systems that autonomously conduct end-to-end research -- from ideation through experimentation to publication-ready manuscripts.

The rapid deployment of AI agents in commercial settings has outpaced the development of evaluation methodologies that reflect production realities. Existing benchmarks measure agent capabilities through retrospectively curated tasks with well-specified requirements and deterministic metrics -- conditions that diverge fundamentally from production environments where requirements contain implicit constraints, inputs are heterogeneous multi-modal documents with information fragmented across sources, tasks demand undeclared domain expertise, outputs are long-horizon professional deliverables, and success is judged by domain experts whose standards evolve over time. We present AlphaEval, a production-grounded benchmark of 94 tasks sourced from seven companies deploying AI agents in their core business, spanning six O*NET (Occupational Information Network) domains. Unlike model-centric benchmarks, AlphaEval evaluates complete agent products -- Claude Code, Codex, etc. -- as commercial systems, capturing performance variations invisible to model-level evaluation. Our evaluation framework covers multiple paradigms (LLM-as-a-Judge, reference-driven metrics, formal verification, rubric-based assessment, automated UI testing, etc.), with individual domains composing multiple paradigms. Beyond the benchmark itself, we contribute a requirement-to-benchmark construction framework -- a systematic methodology that transforms authentic production requirements into executable evaluation tasks in minimal time. This framework standardizes the entire pipeline from requirement to evaluation, providing a reproducible, modular process that any organization can adopt to construct production-grounded benchmarks for their own domains.