Daily Papers

Real-time streaming joint audio-video generation for character animation requires a generator to speak the requested transcript, maintain visual identity across chunks, and run within a strict playback budget. These requirements are difficult to satisfy simultaneously: chunk-wise autoregressive generation can accumulate transcript-audio misalignment and visual drift, while the few-step distillation needed for low latency often degrades spatial diversity and temporal quality. We present StreamChar, a streaming framework that separates long-horizon orchestration from short-window audio-video denoising. An LLM-based orchestrator uses the transcript and historical context to produce frame-aligned audio conditions, and a joint audio-video DiT performs local bidirectional denoising with reference and motion-frame conditioning. For efficient deployment, we use a two-stage distillation pipeline that first compresses the sampler and then fine-tunes the student under online chunk rollouts. A progress-aware pointer aligns partial transcripts with generated audio during rollout training, and a sink-chunk memory provides a persistent visual anchor for reducing long-horizon drift. Experiments on short-clip and long-horizon protocols show that StreamChar runs in real time on a single H100 GPU and provides a favorable system-level trade-off among transcript fidelity, audio-visual synchronization, visual quality, and streaming stability compared with recent joint and audio-driven baselines.

Large Language Model (LLM) agents commonly condition actions on full action-observation histories, which introduce task-irrelevant information that easily leads to redundant actions and higher inference cost. We propose Progress-Aware Belief Update (PABU), a belief-state framework that compactly represents an agent's state by explicitly modeling task progress and selectively retaining past actions and observations. At each step, the agent predicts its relative progress since the previous round and decides whether the newly encountered interaction should be stored, conditioning future decisions only on the retained subset. Across eight environments in the AgentGym benchmark, and using identical training trajectories, PABU achieves an 81.0% task completion rate, outperforming previous State of the art (SoTA) models with full-history belief by 23.9%. Additionally, PABU's progress-oriented action selection improves efficiency, reducing the average number of interaction steps to 9.5, corresponding to a 26.9% reduction. Ablation studies show that both explicit progress prediction and selective retention are necessary for robust belief learning and performance gains.

This paper provides a novel approach to reconciling complex low-level memory model features, such as pointer--integer casts, with desired refinements that are needed to justify the correctness of program transformations. The idea is to use a "two-phased" memory model, one with and unbounded memory and corresponding unbounded integer type, and one with a finite memory; the connection between the two levels is made explicit by our notion of refinement that handles out-of-memory behaviors. This approach allows for more optimizations to be performed and establishes a clear boundary between the idealized semantics of a program and the implementation of that program on finite hardware. To demonstrate the utility of this idea in practice, we instantiate the two-phase memory model in the context of Zakowski et al.'s VIR semantics, yielding infinite and finite memory models of LLVM IR, including low-level features like undef and bitcast. Both the infinite and finite models, which act as specifications, can provably be refined to executable reference interpreters. The semantics justify optimizations, such as dead-alloca-elimination, that were previously impossible or difficult to prove correct.

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

Pharo offers a sophisticated completion engine based on semantic heuristics, which coordinates specific fetchers within a lazy architecture. These heuristics can be recomposed to support various activities (e.g., live programming or history usage navigation). While this system is powerful, it does not account for the repository structure when suggesting global names such as class names, class variables, or global variables. As a result, it does not prioritize classes within the same package or project, treating all global names equally. In this paper, we present a new heuristic that addresses this limitation. Our approach searches variable names in a structured manner: it begins with the package of the requesting class, then expands to other packages within the same repository, and finally considers the global namespace. We describe the logic behind this heuristic and evaluate it against the default semantic heuristic and one that directly queries the global namespace. Preliminary results indicate that the Mean Reciprocal Rank (MRR) improves, confirming that package-awareness completions deliver more accurate and relevant suggestions than the previous flat global approach.

The growing demand for efficient Large Language Model (LLM) inference requires a holistic optimization on algorithms, systems, and hardware. However, very few works have fundamentally changed the generation pattern: each token needs one forward pass and one KV cache. This can be sub-optimal because we found that LLMs are extremely capable of self-identifying the exact dose of information that a single KV cache can store, and many tokens can be generated confidently without global context. Based on this insight, we introduce HAMburger, a Hierarchically Auto-regressive Model that redefines resource allocation in LLMs by moving beyond uniform computation and storage per token during inference. Stacking a compositional embedder and a micro-step decoder in between a base LLM, HAMburger smashes multiple tokens into a single KV and generates several tokens per step. Additionally, HAMburger functions as a speculative decoding framework where it can blindly trust self-drafted tokens. As a result, HAMburger shifts the growth of KV cache and forward FLOPs from linear to sub-linear with respect to output length, and adjusts its inference speed based on query perplexity and output structure. Extensive evaluations show that HAMburger reduces the KV cache computation by up to 2times and achieves up to 2times TPS, while maintaining quality in both short- and long-context tasks. Our method explores an extremely challenging inference regime that requires both computation- and memory-efficiency with a hardware-agnostic design.

We introduce a new neural architecture to learn the conditional probability of an output sequence with elements that are discrete tokens corresponding to positions in an input sequence. Such problems cannot be trivially addressed by existent approaches such as sequence-to-sequence and Neural Turing Machines, because the number of target classes in each step of the output depends on the length of the input, which is variable. Problems such as sorting variable sized sequences, and various combinatorial optimization problems belong to this class. Our model solves the problem of variable size output dictionaries using a recently proposed mechanism of neural attention. It differs from the previous attention attempts in that, instead of using attention to blend hidden units of an encoder to a context vector at each decoder step, it uses attention as a pointer to select a member of the input sequence as the output. We call this architecture a Pointer Net (Ptr-Net). We show Ptr-Nets can be used to learn approximate solutions to three challenging geometric problems -- finding planar convex hulls, computing Delaunay triangulations, and the planar Travelling Salesman Problem -- using training examples alone. Ptr-Nets not only improve over sequence-to-sequence with input attention, but also allow us to generalize to variable size output dictionaries. We show that the learnt models generalize beyond the maximum lengths they were trained on. We hope our results on these tasks will encourage a broader exploration of neural learning for discrete problems.

In this paper, we aim to do code completion based on implementing a Neural Network from Li et. al.. Our contribution is that we use an encoding that is in-between character and word encoding called Byte Pair Encoding (BPE). We use this on the source code files treating them as natural text without first going through the abstract syntax tree (AST). We have implemented two models: an attention-enhanced LSTM and a pointer network, where the pointer network was originally introduced to solve out of vocabulary problems. We are interested to see if BPE can replace the need for the pointer network for code completion.

The popularity of the Rust language continues to explode; yet, many critical codebases remain authored in C, and cannot be realistically rewritten by hand. Automatically translating C to Rust is thus an appealing course of action. Several works have gone down this path, handling an ever-increasing subset of C through a variety of Rust features, such as unsafe. While the prospect of automation is appealing, producing code that relies on unsafe negates the memory safety guarantees offered by Rust, and therefore the main advantages of porting existing codebases to memory-safe languages. We instead explore a different path, and explore what it would take to translate C to safe Rust; that is, to produce code that is trivially memory safe, because it abides by Rust's type system without caveats. Our work sports several original contributions: a type-directed translation from (a subset of) C to safe Rust; a novel static analysis based on "split trees" that allows expressing C's pointer arithmetic using Rust's slices and splitting operations; an analysis that infers exactly which borrows need to be mutable; and a compilation strategy for C's struct types that is compatible with Rust's distinction between non-owned and owned allocations. We apply our methodology to existing formally verified C codebases: the HACL* cryptographic library, and binary parsers and serializers from EverParse, and show that the subset of C we support is sufficient to translate both applications to safe Rust. Our evaluation shows that for the few places that do violate Rust's aliasing discipline, automated, surgical rewrites suffice; and that the few strategic copies we insert have a negligible performance impact. Of particular note, the application of our approach to HACL* results in a 80,000 line verified cryptographic library, written in pure Rust, that implements all modern algorithms - the first of its kind.

Looped architectures provide an inductive bias toward learning step-by-step procedures for tasks that require compositional reasoning. The number of effective layers reached by looping determines the quality of the solution these models find. Like deep architectures, looped architectures are prone to a signal propagation problem induced by depth as the halting decision is postponed. In this paper, we address this signal propagation issue using pre-norm layers and residual scaling. Building on these architectural modifications, we propose FPRM, a Transformer-based Fixed-Point Reasoning Model that uses fixed-point convergence as an end-to-end halting mechanism in a looped architecture. We show that fixed-point halting allows FPRM to adapt its compute to task difficulty. FPRM is effective on common reasoning benchmarks, namely Sudoku, Maze, state-tracking, and ARC-AGI.

Automatic program repair seeks to generate correct code from buggy programs, with most approaches searching the correct program in a discrete, symbolic space of source code tokens. This symbolic search is fundamentally limited by its inability to directly reason about program behavior. We introduce Gradient-Based Program Repair (GBPR), a new paradigm that reframes program repair as continuous optimization in a differentiable numerical program space. Our core insight is to compile symbolic programs into differentiable numerical representations, enabling search in the numerical program space directly guided by program behavior. To evaluate GBPR, we present RaspBugs, a new benchmark of 1,466 buggy symbolic RASP programs and their respective numerical representations. Our experiments demonstrate that GBPR can effectively repair buggy symbolic programs by gradient-based optimization in the numerical program space, with convincing repair trajectories. To our knowledge, we are the first to state program repair as continuous optimization in a numerical program space. Our work establishes a new direction for program repair research, bridging two rich worlds: continuous optimization and program behavior.

Recent advances in large language models (LLMs) and vision-language models (VLMs) have enabled increasingly capable digital agents for computer use. However, real-world tasks are often long-horizon and involve evolving contexts containing accumulated observations, intermediate edits, failed attempts, and partially completed executions. Existing agents typically operate over raw interaction history, making task progress difficult to interpret, verify, and recover, which ultimately limits reliable long-horizon execution. In this paper, we argue that addressing this challenge requires explicitly structuring both the agent's state and workflow around a unified causal representation of task progress. We present StructAgent, a state-centered framework that introduces a unified state for maintaining compact, verifiable task progress and a structured workflow that regulates progress through verifier-backed state transitions. Building on this design, StructAgent further enables explicit progress checkpointing, evidence-driven task completion, targeted failure recovery, and tool-supported execution, while ensuring that all progress updates remain grounded in verification. Extensive experiments demonstrate that StructAgent consistently improves a wide range of LLM and VLM backbones on long-horizon computer-use tasks. On OSWorld-Verified, it improves Qwen3.5-9B from 27.0\% to 46.9\% success rate and Qwen3.5-27B from 31.6\% to 62.2\%, while achieving a new open-source state of the art of 78.9\% with MiniMax-M3. Moreover, the same framework generalizes beyond desktop environments to Minecraft, demonstrating the generality of our design.

Vision-Language Navigation requires agents to act coherently over long horizons by understanding not only local visual context but also how far they have advanced within a multi-step instruction. However, recent Vision-Language-Action models focus on direct action prediction and earlier progress methods predict numeric achievements; both overlook the monotonic co-progression property of the observation and instruction sequences. Building on this insight, Progress-Think introduces semantic progress reasoning, predicting instruction-style progress from visual observations to enable more accurate navigation. To achieve this without expensive annotations, we propose a three-stage framework. In the initial stage, Self-Aligned Progress Pretraining bootstraps a reasoning module via a novel differentiable alignment between visual history and instruction prefixes. Then, Progress-Guided Policy Pretraining injects learned progress states into the navigation context, guiding the policy toward consistent actions. Finally, Progress-Policy Co-Finetuning jointly optimizes both modules with tailored progress-aware reinforcement objectives. Experiments on R2R-CE and RxR-CE show state-of-the-art success and efficiency, demonstrating that semantic progress yields a more consistent representation of navigation advancement.

Large language models (LLMs) use function calls to interface with external tools and data source. However, the current approach to LLM function calling is inherently synchronous, where each call blocks LLM inference, limiting LLM operation and concurrent function execution. In this work, we propose AsyncLM, a system for asynchronous LLM function calling. AsyncLM improves LLM's operational efficiency by enabling LLMs to generate and execute function calls concurrently. Instead of waiting for each call's completion, AsyncLM introduces an interrupt mechanism to asynchronously notify the LLM in-flight when function calls return. We design an in-context protocol for function calls and interrupts, provide fine-tuning strategy to adapt LLMs to the interrupt semantics, and implement these mechanisms efficiently on LLM inference process. We demonstrate that AsyncLM can reduce end-to-end task completion latency from 1.6x-5.4x compared to synchronous function calling on a set of benchmark tasks in the Berkeley function calling leaderboard (BFCL). Furthermore, we discuss how interrupt mechanisms can be extended to enable novel human-LLM or LLM-LLM interactions.

Large Language Model (LLM) inference requires substantial computational resources, yet CPU-based inference remains essential for democratizing AI due to the widespread availability of CPUs compared to specialized accelerators. However, efficient LLM inference on CPUs faces two fundamental challenges: (1) existing CPU architectures struggle with low-precision arithmetic required by quantized models, where optimal bit precision varies across models and layers; and (2) the memory-bound nature of the token generation phase creates severe performance bottlenecks. To address these challenges, we propose SAIL (SRAM-Accelerated Inference of LLMs), a CPU-based inference solution that efficiently supports arbitrary bit precisions with minimal overhead. SAIL integrates three key innovations: First, we introduce Batched LUT-based General Matrix-Vector Multiplication (LUT-GEMV) with SRAM-based processing-in-memory, enabling high data reuse through lookup tables and reducing memory movement. Second, our Pattern-Aware LUT optimization identifies and exploits redundancy in input activation patterns, reducing computation cycles by 13.8\%. Third, we develop an in-memory type conversion algorithm that leverages PIM's parallelism for efficient de-/quantization operations, alleviating pressure on CPU's vector units. Our architecture requires only 2\% hardware overhead and a single new instruction, while maintaining dual functionality as both compute and storage units. Experimental evaluations using a modified gem5 simulator demonstrate that SAIL achieves up to 10.7x speedup and 19.9x higher tokens per dollar compared to ARM Neoverse-N1 CPU baselines, and up to 7.04x better cost efficiency than NVIDIA V100 GPUs, establishing a practical path for efficient CPU-based LLM inference.

LLM-based Triton kernel generation has attracted significant interest, yet a fundamental empirical question remains unanswered: where does this capability break down, and why? We present KernelBench-X, a benchmark designed to answer this question through category-aware evaluation of correctness and hardware efficiency across 176 tasks in 15 categories. Our systematic comparison of five representative methods yields three main findings. First, task structure determines correctness more than method design. Category explains nearly three times more variance in semantic correctness than method (9.4% vs 3.3% explained deviance), and 72% of Fusion tasks fail across all five methods while Math tasks are solved consistently. Second, iterative refinement improves correctness, but not performance. Across GEAK iterations, compile rate rises from 52.3% to 68.8% while average speedup declines from 1.58times to 1.44times; newly rescued kernels consistently underperform persistently correct ones (1.16times vs 1.58times speedup in round~0to1). Third, correctness does not imply efficiency. 46.6% of correct kernels are slower than the PyTorch eager baseline, and cross-hardware speedup variance reaches 21.4times. Besides, quantization remains completely unsolved (0/30 successes) despite non-trivial compilation rates, revealing systematic misunderstanding of numerical computation contracts rather than surface-level syntax errors. These findings suggest that future progress depends on handling global coordination, explicitly modeling numerical precision, and incorporating hardware efficiency into generation. The code is available at https://github.com/BonnieW05/KernelBenchX

Skiplists are widely used for in-memory indexing in many key-value stores, such as RocksDB and LevelDB, due to their ease of implementation and simple concurrency control mechanisms. However, traditional skiplists suffer from poor cache locality, as they store only a single element per node, leaving performance on the table. Minimizing last-level cache misses is key to maximizing in-memory index performance, making high cache locality essential. In this paper, we present a practical concurrent B-skiplist that enhances cache locality and performance while preserving the simplicity of traditional skiplist structures and concurrency control schemes. Our key contributions include a top-down, single-pass insertion algorithm for B-skiplists and a corresponding simple and efficient top-down concurrency control scheme. On 128 threads, the proposed concurrent B-skiplist achieves between 2x-9x higher throughput compared to state-of-the-art concurrent skiplist implementations, including Facebook's concurrent skiplist from Folly and the Java ConcurrentSkipListMap. Furthermore, we find that the B-skiplist achieves competitive (0.9x-1.7x) throughput on point workloads compared to state-of-the-art cache-optimized tree-based indices (e.g., Masstree). For a more complete picture of the performance, we also measure the latency of skiplist and tree-based indices and find that the B-skiplist achieves between 3.5x-103x lower 99% latency compared to other concurrent skiplists and between 0.85x-64x lower 99% latency compared to tree-based indices on point workloads with inserts.

On the way to Exascale, programmers face the increasing challenge of having to support multiple hardware architectures from the same code base. At the same time, portability of code and performance are increasingly difficult to achieve as hardware architectures are becoming more and more diverse. Today's heterogeneous systems often include two or more completely distinct and incompatible hardware execution models, such as GPGPU's, SIMD vector units, and general purpose cores which conventionally have to be programmed using separate tool chains representing non-overlapping programming models. The recent revival of interest in the industry and the wider community for the C++ language has spurred a remarkable amount of standardization proposals and technical specifications in the arena of concurrency and parallelism. This recently includes an increasing amount of discussion around the need for a uniform, higher-level abstraction and programming model for parallelism in the C++ standard targeting heterogeneous and distributed computing. Such an abstraction should perfectly blend with existing, already standardized language and library features, but should also be generic enough to support future hardware developments. In this paper, we present the results from developing such a higher-level programming abstraction for parallelism in C++ which aims at enabling code and performance portability over a wide range of architectures and for various types of parallelism. We present and compare performance data obtained from running the well-known STREAM benchmark ported to our higher level C++ abstraction with the corresponding results from running it natively. We show that our abstractions enable performance at least as good as the comparable base-line benchmarks while providing a uniform programming API on all compared target architectures.

Production-grade LLM systems require robust adherence to dozens or even hundreds of instructions simultaneously. However, the instruction-following capabilities of LLMs at high instruction densities have not yet been characterized, as existing benchmarks only evaluate models on tasks with a single or few instructions. We introduce IFScale, a simple benchmark of 500 keyword-inclusion instructions for a business report writing task to measure how instruction-following performance degrades as instruction density increases. We evaluate 20 state-of-the-art models across seven major providers and find that even the best frontier models only achieve 68% accuracy at the max density of 500 instructions. Our analysis reveals model size and reasoning capability to correlate with 3 distinct performance degradation patterns, bias towards earlier instructions, and distinct categories of instruction-following errors. Our insights can help inform design of instruction-dense prompts in real-world applications and highlight important performance-latency tradeoffs. We open-source the benchmark and all results for further analysis at https://distylai.github.io/IFScale.

We present a very simple algorithm for attention that requires O(1) memory with respect to sequence length and an extension to self-attention that requires O(log n) memory. This is in contrast with the frequently stated belief that self-attention requires O(n^2) memory. While the time complexity is still O(n^2), device memory rather than compute capability is often the limiting factor on modern accelerators. Thus, reducing the memory requirements of attention allows processing of longer sequences than might otherwise be feasible. We provide a practical implementation for accelerators that requires O(n) memory, is numerically stable, and is within a few percent of the runtime of the standard implementation of attention. We also demonstrate how to differentiate the function while remaining memory-efficient. For sequence length 16384, the memory overhead of self-attention is reduced by 59X for inference and by 32X for differentiation.

Programmable switches are driving a massive increase in fine-grained measurements. This puts significant pressure on telemetry collectors that have to process reports from many switches. Past research acknowledged this problem by either improving collectors' stack performance or by limiting the amount of data sent from switches. In this paper, we take a different and radical approach: switches are responsible for directly inserting queryable telemetry data into the collectors' memory, bypassing their CPU, and thereby improving their collection scalability. We propose to use a method we call direct telemetry access, where switches jointly write telemetry reports directly into the same collector's memory region, without coordination. Our solution, DART, is probabilistic, trading memory redundancy and query success probability for CPU resources at collectors. We prototype DART using commodity hardware such as P4 switches and RDMA NICs and show that we get high query success rates with a reasonable memory overhead. For example, we can collect INT path tracing information on a fat tree topology without a collector's CPU involvement while achieving 99.9\% query success probability and using just 300 bytes per flow.

Dynamic sparse attention (DSA) accelerates long-context LLM decoding by attending to only the top-K KV blocks relevant to each query, but it introduces a serialized selection-to-attention dependency that emerges as a new latency bottleneck. We present PRR, a speculate-reuse-repair runtime that exploits temporal locality in DSA selections to predict likely blocks, speculate the attention over them while selection is in flight, and incrementally repair missed blocks once the true selected set is known. PRR uses a lightweight EMA-based predictor, a profiling-guided speculation budget that keeps speculative work off the critical path, and a FlashAttention-based repair kernel that folds missed blocks into the partial attention state using online-softmax statistics. Across long-context benchmarks and representative DSA methods, PRR reduces per-token decoding latency by up to 40% while preserving downstream task accuracy. Github: https://github.com/Tianyu9748/Incremental_FlashAttention

Hardware prefetching is critical to fill the performance gap between CPU speeds and slower memory accesses. With multicore architectures becoming commonplace, traditional prefetchers are severely challenged. Independent core operation creates significant redundancy (up to 20% of prefetch requests are duplicates), causing unnecessary memory bus traffic and wasted bandwidth. Furthermore, cutting-edge prefetchers such as Pythia suffer from about a 10% performance loss when scaling from a single-core to a four-core system. To solve these problems, we propose CRL-Pythia, a coordinated reinforcement learning based prefetcher specifically designed for multicore systems. In this work, CRL-Pythia addresses these issues by enabling cross-core sharing of information and cooperative prefetching decisions, which greatly reduces redundant prefetch requests and improves learning convergence across cores. Our experiments demonstrate that CRL-Pythia outperforms single Pythia configurations in all cases, with approximately 12% IPC (instructions per cycle) improvement for bandwidth-constrained workloads, while imposing moderate hardware overhead. Our sensitivity analyses also verify its robustness and scalability, thereby making CRL-Pythia a practical and efficient solution to contemporary multicore systems.

Over the last three decades, innovations in the memory subsystem were primarily targeted at overcoming the data movement bottleneck. In this paper, we focus on a specific market trend in memory technology: 3D-stacked memory and caches. We investigate the impact of extending the on-chip memory capabilities in future HPC-focused processors, particularly by 3D-stacked SRAM. First, we propose a method oblivious to the memory subsystem to gauge the upper-bound in performance improvements when data movement costs are eliminated. Then, using the gem5 simulator, we model two variants of LARC, a processor fabricated in 1.5 nm and enriched with high-capacity 3D-stacked cache. With a volume of experiments involving a board set of proxy-applications and benchmarks, we aim to reveal where HPC CPU performance could be circa 2028, and conclude an average boost of 9.77x for cache-sensitive HPC applications, on a per-chip basis. Additionally, we exhaustively document our methodological exploration to motivate HPC centers to drive their own technological agenda through enhanced co-design.

Address translation is a performance bottleneck in data-intensive workloads due to large datasets and irregular access patterns that lead to frequent high-latency page table walks (PTWs). PTWs can be reduced by using (i) large hardware TLBs or (ii) large software-managed TLBs. Unfortunately, both solutions have significant drawbacks: increased access latency, power and area (for hardware TLBs), and costly memory accesses, the need for large contiguous memory blocks, and complex OS modifications (for software-managed TLBs). We present Victima, a new software-transparent mechanism that drastically increases the translation reach of the processor by leveraging the underutilized resources of the cache hierarchy. The key idea of Victima is to repurpose L2 cache blocks to store clusters of TLB entries, thereby providing an additional low-latency and high-capacity component that backs up the last-level TLB and thus reduces PTWs. Victima has two main components. First, a PTW cost predictor (PTW-CP) identifies costly-to-translate addresses based on the frequency and cost of the PTWs they lead to. Second, a TLB-aware cache replacement policy prioritizes keeping TLB entries in the cache hierarchy by considering (i) the translation pressure (e.g., last-level TLB miss rate) and (ii) the reuse characteristics of the TLB entries. Our evaluation results show that in native (virtualized) execution environments Victima improves average end-to-end application performance by 7.4% (28.7%) over the baseline four-level radix-tree-based page table design and by 6.2% (20.1%) over a state-of-the-art software-managed TLB, across 11 diverse data-intensive workloads. Victima (i) is effective in both native and virtualized environments, (ii) is completely transparent to application and system software, and (iii) incurs very small area and power overheads on a modern high-end CPU.

We study the design decisions of publicly available instruction tuning methods, and break down the development of Flan 2022 (Chung et al., 2022). Through careful ablation studies on the Flan Collection of tasks and methods, we tease apart the effect of design decisions which enable Flan-T5 to outperform prior work by 3-17%+ across evaluation settings. We find task balancing and enrichment techniques are overlooked but critical to effective instruction tuning, and in particular, training with mixed prompt settings (zero-shot, few-shot, and chain-of-thought) actually yields stronger (2%+) performance in all settings. In further experiments, we show Flan-T5 requires less finetuning to converge higher and faster than T5 on single downstream tasks, motivating instruction-tuned models as more computationally-efficient starting checkpoints for new tasks. Finally, to accelerate research on instruction tuning, we make the Flan 2022 collection of datasets, templates, and methods publicly available at https://github.com/google-research/FLAN/tree/main/flan/v2.

The quadratic computational complexity of the standard attention mechanism constitutes a fundamental bottleneck for large language models in long-context inference. While existing KV cache compression methods alleviate memory pressure, they often sacrifice generation quality and fail to address the high overhead of floating-point arithmetic. This paper introduces DASH-KV, an innovative acceleration framework that reformulates attention as approximate nearest-neighbor search via asymmetric deep hashing. Under this paradigm, we design an asymmetric encoding architecture that differentially maps queries and keys to account for their distinctions in precision and reuse characteristics. To balance efficiency and accuracy, we further introduce a dynamic mixed-precision mechanism that adaptively retains full-precision computation for critical tokens. Extensive experiments on LongBench demonstrate that DASH-KV significantly outperforms state-of-the-art baseline methods while matching the performance of full attention, all while reducing inference complexity from O(N^2) to linear O(N). The code is available at https://github.com/Zhihan-Zh/DASH-KV

As Rust gains traction for developing safer systems software, a reality check for the microcontroller hardware segment becomes necessary. How ready is the Rust ecosystem for this segment? Can Rust compete with C in practice? This paper reports on an IoT industrial case study that contributes to answering these questions. Two teams concurrently developing the same functionality (one in C, one in Rust) are analyzed over a period of several months. A comparative analysis of their approaches, results, and iterative efforts is provided. The analysis and measurements on hardware indicate no strong reason to prefer C over Rust for microcontroller firmware on the basis of memory footprint or execution speed. Furthermore, Ariel OS is shown to provide an efficient and portable system runtime in Rust whose footprint is smaller than that of the state-of-the-art bare-metal C stack traditionally used in this context. It is concluded that Rust is a sound choice today for firmware development in this domain.

Computer-use agents provide a promising path toward general software automation because they can interact directly with arbitrary graphical user interfaces instead of relying on brittle, application-specific integrations. Despite recent advances in benchmark performance, strong computer-use agents remain expensive and slow in practice, since most systems invoke large multimodal models at nearly every interaction step. We argue that this uniform allocation of compute is fundamentally inefficient for long-horizon GUI tasks. Such trajectories are highly heterogeneous: many steps are routine and can be handled reliably by smaller, cheaper policies, while errors tend to concentrate at a relatively small number of high-risk moments. Across computer-use benchmarks, these failures repeatedly take two forms: progress stalls, where the agent loops, repeats ineffective actions, or fails to make meaningful progress, and silent semantic drift, where the agent continues taking locally plausible actions after already deviating from the user's true goal. To address this inefficiency, we propose an event-driven, step-level cascade for computer-use agents that runs a small policy by default and escalates to a stronger model only when lightweight learned monitors detect elevated risk. Our framework combines two complementary signals: a Stuck Monitor that detects degraded progress from recent reasoning-action history and triggers recovery, and a Milestone Monitor that identifies semantically meaningful checkpoints where sparse verification is most informative for catching drift. This design turns always-on frontier-model inference into adaptive, on-demand compute allocation over the course of an evolving interaction. The framework is modular and deployment-oriented: it can be layered on top of existing computer-use agents without changing the underlying agent architecture or retraining the large model.

The waning of Moore's Law has shifted the focus of the tech industry towards alternative methods for continued performance gains. While optimizing compilers are a standard tool to help increase program efficiency, programmers continue to shoulder much responsibility in crafting and refactoring code with better performance characteristics. In this paper, we investigate the ability of large language models (LLMs) to suggest functionally correct, performance improving code edits. We hypothesize that language models can suggest such edits in ways that would be impractical for static analysis alone. We investigate these questions by curating a large-scale dataset of Performance-Improving Edits, PIE. PIE contains trajectories of programs, where a programmer begins with an initial, slower version and iteratively makes changes to improve the program's performance. We use PIE to evaluate and improve the capacity of large language models. Specifically, use examples from PIE to fine-tune multiple variants of CODEGEN, a billion-scale Transformer-decoder model. Additionally, we use examples from PIE to prompt OpenAI's CODEX using a few-shot prompting. By leveraging PIE, we find that both CODEX and CODEGEN can generate performance-improving edits, with speedups of more than 2.5x for over 25% of the programs, for C++ and Python, even after the C++ programs were compiled using the O3 optimization level. Crucially, we show that PIE allows CODEGEN, an open-sourced and 10x smaller model than CODEX, to match the performance of CODEX on this challenging task. Overall, this work opens new doors for creating systems and methods that can help programmers write efficient code.

Estimating task progress requires reasoning over long-horizon dynamics rather than recognizing static visual content. While modern Vision-Language Models (VLMs) excel at describing what is visible, it remains unclear whether they can infer how far a task has progressed from partial observations. To this end, we introduce Progress-Bench, a benchmark for systematically evaluating progress reasoning in VLMs. Beyond benchmarking, we further explore a human-inspired two-stage progress reasoning paradigm through both training-free prompting and training-based approach based on curated dataset ProgressLM-45K. Experiments on 14 VLMs show that most models are not yet ready for task progress estimation, exhibiting sensitivity to demonstration modality and viewpoint changes, as well as poor handling of unanswerable cases. While training-free prompting that enforces structured progress reasoning yields limited and model-dependent gains, the training-based ProgressLM-3B achieves consistent improvements even at a small model scale, despite being trained on a task set fully disjoint from the evaluation tasks. Further analyses reveal characteristic error patterns and clarify when and why progress reasoning succeeds or fails.

Large-scale pre-trained language models, such as BERT and GPT-2, have achieved excellent performance in language representation learning and free-form text generation. However, these models cannot be directly employed to generate text under specified lexical constraints. To address this challenge, we present POINTER (PrOgressive INsertion-based TransformER), a simple yet novel insertion-based approach for hard-constrained text generation. The proposed method operates by progressively inserting new tokens between existing tokens in a parallel manner. This procedure is recursively applied until a sequence is completed. The resulting coarse-to-fine hierarchy makes the generation process intuitive and interpretable. We pre-train our model with the proposed progressive insertion-based objective on a 12GB Wikipedia dataset, and fine-tune it on downstream hard-constrained generation tasks. Non-autoregressive decoding yields an empirically logarithmic time complexity during inference time. Experimental results on both News and Yelp datasets demonstrate that POINTER achieves state-of-the-art performance on constrained text generation. We released the pre-trained models and the source code to facilitate future research (https://github.com/dreasysnail/POINTER).

Despite the effort in vulnerability detection over the last two decades, memory safety vulnerabilities continue to be a critical problem. Recent reports suggest that the key solution is to migrate to memory-safe languages. To this end, C-to-Rust transpilation becomes popular to resolve memory-safety issues in C programs. Recent works propose C-to-Rust transpilation frameworks; however, a comprehensive evaluation dataset is missing. Although one solution is to put together a large enough dataset, this increases the analysis time in automated frameworks as well as in manual efforts for some cases. In this work, we build a method to select functions from a large set to construct a minimized yet representative dataset to evaluate the C-to-Rust transpilation. We propose C2RUST-BENCH that contains 2,905 functions, which are representative of C-to-Rust transpilation, selected from 15,503 functions of real-world programs.

Speculative Decoding (SD) accelerates low-concurrency LLM inference by employing a draft-then-verify paradigm. However, mainstream methods typically rely on multi-token prediction, which introduces escalating prediction difficulty and serial drafting latency. To address these, we propose Speculative Pipeline Decoding (SPD), a groundbreaking framework that unlocks the true potential of pipeline parallelism. By partitioning the target LLM into n pipeline stages, SPD allows LLM to process n tokens in parallel to accelerate decoding. To continuous fill the pipeline in single sequence decoding, a speculation module aggregates intermediate features across different pipeline depths to predict the next token, executing strictly in parallel with the target model's pipeline step, to realize bounded difficulty, higher acceptance rates, and zero latency bubbles. Our experiments demonstrate that SPD achieves a significantly higher theoretical speedup compared to mainstream baselines, offering a highly scalable solution for LLM decoding acceleration. Our code is available at https://github.com/yuyijiong/speculative_pipeline_decoding

Pipeline parallelism (PP) is widely used for training large language models (LLMs), yet its scalability is often constrained by high activation memory consumption as the number of in-flight microbatches grows with the degree of PP. In this paper, we focus on addressing this challenge by leveraging the under-explored memory offload strategy in PP. With empirical study, we discover that in the majority of standard configurations, at least half, and potentially all, of the activations can be offloaded with negligible overhead. In the cases where full overload is not possible, we introduce a novel selective offload strategy that decreases peak activation memory in a better-than-linear manner. Furthermore, we integrate memory offload with other techniques to jointly consider overall throughput and memory limitation. Our experiments proves that the per-device activation memory effectively reduces with the total number of stages, making PP a stronger alternative than TP, offering up to a 19\% acceleration with even lower memory consumption. The implementation is open-sourced at https://github.com/sail-sg/zero-bubble-pipeline-parallelism{this url}.

Data movement between the CPU and main memory is a first-order obstacle against improving performance, scalability, and energy efficiency in modern systems. Computer systems employ a range of techniques to reduce overheads tied to data movement, spanning from traditional mechanisms (e.g., deep multi-level cache hierarchies, aggressive hardware prefetchers) to emerging techniques such as Near-Data Processing (NDP), where some computation is moved close to memory. Our goal is to methodically identify potential sources of data movement over a broad set of applications and to comprehensively compare traditional compute-centric data movement mitigation techniques to more memory-centric techniques, thereby developing a rigorous understanding of the best techniques to mitigate each source of data movement. With this goal in mind, we perform the first large-scale characterization of a wide variety of applications, across a wide range of application domains, to identify fundamental program properties that lead to data movement to/from main memory. We develop the first systematic methodology to classify applications based on the sources contributing to data movement bottlenecks. From our large-scale characterization of 77K functions across 345 applications, we select 144 functions to form the first open-source benchmark suite (DAMOV) for main memory data movement studies. We select a diverse range of functions that (1) represent different types of data movement bottlenecks, and (2) come from a wide range of application domains. Using NDP as a case study, we identify new insights about the different data movement bottlenecks and use these insights to determine the most suitable data movement mitigation mechanism for a particular application. We open-source DAMOV and the complete source code for our new characterization methodology at https://github.com/CMU-SAFARI/DAMOV.

Long-context inference in decoder-only language models is costly because long prompts are processed during Prefill, cached at every layer, and repeatedly attended to during autoregressive Decode. We introduce Shallow Prefill, dEEp Decode (SPEED), a phase-asymmetric KV-visibility policy that materializes non-anchor prompt-token KV states only in lower layers while keeping Decode-phase tokens full-depth. Unlike previous approaches that make upper-layer prompt KV states cheaper to store or construct, SPEED removes prefill tokens from the upper-layer Decode visibility set altogether. With a minimal BoS anchor, this simple change preserves broad benchmark quality while reducing long-context cost. In a controlled Llama-3.1-8B instruction-tuning study, SPEED using only 75\% of layers for prefill tokens reaches 51.2 average score on OLMES-style benchmarks, compared with 51.4 for the full-depth baseline, while improving TTFT by 33\%, TPOT by 22\%, and reducing active KV memory by 25.0\% at 128K context. Layer-wise diagnostics suggest that this cutoff retains the main prompt-selection and representation-stabilization regions of the full-depth model. These results show that long-context prompt tokens need not always persist as full-depth KV-cache objects when Decode-phase tokens remain full-depth.

Pipeline parallelism is essential for training large neural networks, but existing schedules trade off throughput, memory, and optimization consistency. Synchronous pipelines preserve forward/backward weight consistency but suffer from bubbles; asynchronous pipelines remove bubbles but introduce weight-version mismatch, typically requiring weight stashing, prediction, or correction mechanisms. We introduce PACI (Pipeline Asynchronous training with Controlled Inconsistency), a bubble-free asynchronous pipeline method that bounds forward/backward version drift without weight stashing, prediction, additional parameter copies, or global synchronization. The key idea is to use local gradient accumulation as a version-control mechanism: by slowing parameter-version evolution relative to pipeline delay, PACI limits the number of optimizer updates crossed by any micro-batch while preserving steady-state utilization. In GPT-style language-model pretraining, PACI matches the stability and final perplexity of synchronous 1F1B-flush, retains the same peak memory footprint, achieves fully utilized pipeline throughput, and improves training time-to-accuracy by up to 1.69times over the fastest flush baseline. These results show that forward/backward inconsistency need not be eliminated: when explicitly bounded, it can be safely traded for substantial efficiency gains.

Modern AI systems rely on vector embeddings stored and searched using floating-point arithmetic. While effective for approximate similarity search, this design introduces fundamental non-determinism: identical models, inputs, and code can produce different memory states and retrieval results across hardware architectures (e.g., x86 vs. ARM). This prevents replayability and safe deployment, leading to silent data divergence that prevents post-hoc verification and compromises audit trails in regulated sectors. We present Valori, a deterministic AI memory substrate that replaces floating-point memory operations with fixed-point arithmetic (Q16.16) and models memory as a replayable state machine. Valori guarantees bit-identical memory states, snapshots, and search results across platforms. We demonstrate that non-determinism arises before indexing or retrieval and show how Valori enforces determinism at the memory boundary. Our results suggest that deterministic memory is a necessary primitive for trustworthy AI systems. The reference implementation is open-source and available at https://github.com/varshith-Git/Valori-Kernel (archived at https://zenodo.org/records/18022660).

Large language models rely heavily on prompts to specify tasks, recall knowledge and guide reasoning. However, this reliance is inefficient as prompts must be re-read at each step, scale poorly across tasks, and lack mechanisms for modular reuse. We introduce TokMem, a tokenized procedural memory that stores recurring procedures as compact, trainable embeddings. Each memory token encodes both an address to a procedure and a control signal that steers generation, enabling targeted behavior with constant-size overhead. To support continual adaptation, TokMem keeps the backbone model frozen, allowing new procedures to be added without interfering with existing ones. We evaluate TokMem on 1,000 tasks for atomic recall, and on function-calling tasks for compositional recall, where it consistently outperforms retrieval-augmented generation while avoiding repeated context overhead, and fine-tuning with far fewer parameters. These results establish TokMem as a scalable and modular alternative to prompt engineering and fine-tuning, offering an explicit procedural memory for LLMs.

Long-horizon robotic manipulation requires dense feedback that reflects how a task advances through its procedural stages, not merely whether the final outcome is successful. Existing reward models often rely on trajectory-level success labels or time-based interpolation, which can conflate elapsed time with true task progress and therefore fail to capture unfinished steps, stagnation, and failure states. We present ProcVLM, a progress-aware vision-language model that learns procedure-grounded progress as a dense reward signal for manipulation. Rather than deriving progress from terminal outcomes or temporal proxies, ProcVLM grounds progress estimation in procedural structure and intra-stage visual change, and further adopts a reasoning-before-estimation paradigm that infers the remaining atomic actions before estimating task progress. Specifically, we construct this supervision by synthesizing frame-level subtask-semantic annotations, assigning progress budgets according to subtask structure, and distributing each budget based on intra-subtask visual change. To train ProcVLM at scale, we build a standardized procedural supervision synthesis pipeline and construct ProcCorpus-60M from 30 embodied datasets with 60M annotated frames, from which we derive ProcVQA for procedure-aware pretraining, with progress estimation as the central task alongside action segmentation and future planning. Experiments on ProcVQA and reward-model benchmarks show that ProcVLM improves embodied procedural reasoning and yields more discriminative trajectory-internal progress estimates than representative baselines, supporting its use as a dense reward model for downstream reward-guided policy optimization. Project page: https://procvlm.github.io/

Memory is essential for enabling large language models to support long-horizon reasoning, yet existing memory systems remain unreliable and difficult to debug. Tracing memory's dynamic evolution is crucial to understand how information is synthesized, propagated, or corrupted over time. In this work, we study the new problem of error tracing and attribution in LLM memory systems. We propose a novel framework that transforms memory pipelines into executable memory evolution graphs, enabling fine-grained tracing of operational information flow. We then construct MemTraceBench, a benchmark collected from representative memory systems such as Long-Context, RAG, Mem0, and EverMemOS, to systematically study memory failure modes. We further introduce an automatic attribution method that iteratively traces operation subgraphs to pinpoint the root cause of any failed case. Our analysis reveals that memory failures are systematic, stemming from operation-level issues like information loss and retrieval misalignment. Crucially, we leverage these fine-grained attribution signals to guide downstream prompt optimization, establishing a closed-loop system that automatically corrects faults and boosts end-task performance by up to 7.62%. Code will be released at https://github.com/zjunlp/MemTrace.

The growing demand for efficient long-sequence modeling on edge devices has propelled widespread adoption of State Space Models (SSMs) like Mamba, due to their superior computational efficiency and scalability. As its autoregressive generation process remains memory-bound, speculative decoding has been proposed that incorporates draft model generation and target model verification. However, directly applying speculative decoding to SSMs faces three key challenges: (1) hidden state backtracking difficulties, (2) tree-based parallel verification incompatibility, and (3) hardware workload mismatch. To address these challenges, we propose SpecMamba, the first FPGA-based accelerator for Mamba with speculative decoding, which features system, algorithm, and hardware co-design. At the system level, we present a memory-aware hybrid backtracking strategy to coordinate both models. At the algorithm level, we propose first-in-first-out (FIFO)-based tree verification with tiling to minimize memory access. At the hardware level, we customize a dataflow that computes linear layers in parallel and SSM layers in series to enable maximal overlapping. Implemented on AMD FPGA platforms (VHK158 and VCK190), SpecMamba achieves a 2.27x speedup over GPU baselines and a 2.85x improvement compared to prior FPGA solutions, while demonstrating 5.41x and 1.26x higher energy efficiency, respectively.

Migrating existing C programs into Rust is increasingly desired, as Rust offers superior memory safety while maintaining C's high performance. However, vastly different features between C and Rust--e.g., distinct definitions and usages of pointers and references--pose significant challenges beyond mere syntactic translation. Existing automated translation tools, such as C2Rust, may rely too much on syntactic, template-based translation and generate unsafe Rust code that is hard for human developers to read, maintain, or even compile. More semantic-aware translation that produces safer, idiomatic, and runnable Rust code is much needed. This paper introduces a novel dependency-guided and large language model (LLM)-based C-to-Rust translation approach, RustMap, based on three key ideas: (1) Utilize LLM capabilities to produce idiomatic Rust code from given small pieces of C code, (2) Mitigate LLM limitations in handling large codebases by breaking project-scale C programs into smaller units for translation according to their usage dependencies and composing them into a runnable Rust program, and (3) Enhance the correctness of the translated Rust program by using test cases to check input/output equivalence, isolate faulty code when execution states deviate, and iteratively refine the translation using feedback from compilation and test errors. We empirically evaluate RustMap on 126 real-world programs, including 125 from Rosetta Code and a 7000+ line bzip2 implementation using GPT-4o as the LLM. RustMap shows promising results, guiding GPT-4o to produce idiomatic, readable, and functional Rust code with significantly less unsafe code than other tools, and revealing non-trivial translation patterns reusable for future research.

Pretrained code language models have enabled great progress towards program synthesis. However, common approaches only consider in-file local context and thus miss information and constraints imposed by other parts of the codebase and its external dependencies. Existing code completion benchmarks also lack such context. To resolve these restrictions we curate a new dataset of permissively licensed Python packages that includes full projects and their dependencies and provide tools to extract non-local information with the help of program analyzers. We then focus on the task of function call argument completion which requires predicting the arguments to function calls. We show that existing code completion models do not yield good results on our completion task. To better solve this task, we query a program analyzer for information relevant to a given function call, and consider ways to provide the analyzer results to different code completion models during inference and training. Our experiments show that providing access to the function implementation and function usages greatly improves the argument completion performance. Our ablation study provides further insights on how different types of information available from the program analyzer and different ways of incorporating the information affect the model performance.

In LLM inference, the same prompt may yield different outputs across different runs. At the system level, this non-determinism arises from floating-point non-associativity combined with dynamic batching and GPU kernels whose reduction orders vary with batch size. A straightforward way to eliminate non-determinism is to disable dynamic batching during inference, but doing so severely degrades throughput. Another approach is to make kernels batch-invariant; however, this tightly couples determinism to kernel design, requiring new implementations. This coupling also imposes fixed runtime overheads, regardless of how much of the workload actually requires determinism. Inspired by ideas from speculative decoding, we present LLM-42, a scheduling-based approach to enable determinism in LLM inference. Our key observation is that if a sequence is in a consistent state, the next emitted token is likely to be consistent even with dynamic batching. Moreover, most GPU kernels use shape-consistent reductions. Leveraging these insights, LLM-42 decodes tokens using a non-deterministic fast path and enforces determinism via a lightweight verify-rollback loop. The verifier replays candidate tokens under a fixed-shape reduction schedule, commits those that are guaranteed to be consistent across runs, and rolls back those violating determinism. LLM-42 mostly re-uses existing kernels unchanged and incurs overhead only in proportion to the traffic that requires determinism.

Large Language Models (LLMs) have demonstrated strong capabilities across various domains, with recent advancements in challenging reasoning tasks such as mathematics and programming. However, solving reasoning tasks often requires long decoding chains (of thoughts), which incur O(N) time and memory consumption, where N is the chain length. To mitigate O(N) time and memory consumption, existing sparsity-based algorithms propose retaining only the most critical token's intermediate data (i.e., key-value cache) and discarding the rest. However, these existing algorithms struggle with the ``impossible trinity'' of accuracy, time, and memory. For example, the state-of-the-art algorithm, Quest, achieves high accuracy with O(L) time but O(N) memory (L is the cache budget, L ll N). To address this issue, in this paper, we identify a new attention pattern during the decode stage of reasoning tasks, where milestone tokens (analogous to lemmas in mathematical proofs) emerge, are utilized, and then become unimportant afterward. Based on this pattern, we propose a new algorithm named RaaS that identifies and retains milestone tokens only until they are no longer needed, achieving high accuracy with O(L) time and O(L) memory complexity.

Efficient long-context LLM deployment is stalled by a dichotomy between amortized compression, which struggles with out-of-distribution generalization, and Test-Time Training, which incurs prohibitive synthetic data costs and requires modifying model weights, creating stateful parameters that complicate concurrent serving. We propose Latent Context Compilation, a framework that fundamentally shifts context processing from adaptation to compilation. By utilizing a disposable LoRA module as a compiler, we distill long contexts into compact buffer tokens -- stateless, portable memory artifacts that are plug-and-play compatible with frozen base models. Crucially, we introduce a self-aligned optimization strategy that eliminates the need for synthetic context-relevant QA pairs. By regularizing context reconstruction task with context-agnostic random queries, we force compressed tokens to reside within the model's existing instruction-following manifold. Experiments with Llama-3.1-8B demonstrate that Latent Context Compilation preserves fine-grained details and reasoning capabilities where prior methods falter, effectively decoupling memory density from model parameters even at a 16x compression ratio.

Autoregressive decoding remains a primary bottleneck in large language model (LLM) serving, motivating speculative decoding methods that reduce expensive teacher-model invocations by verifying multiple candidate tokens per step. Tree-structured speculation further increases parallelism, but is often brittle when ported across heterogeneous backends and accelerator stacks, where attention masking, KV-cache layouts, and indexing semantics are not interchangeable. We present EAGLE-Pangu, a reproducible system that ports EAGLE-3-style tree speculative decoding to a Pangu teacher backend on Ascend NPUs. EAGLE-Pangu contributes (i) an explicit branch/commit cache manager built on the Cache API, (ii) accelerator-safe tree tensorization that removes undefined negative indices by construction and validates structural invariants, and (iii) a fused-kernel-compatible teacher verification path with a debuggable eager fallback. On 240 turns from MT-Bench and HumanEval-style prompts, EAGLE-Pangu improves end-to-end decoding throughput by 1.27x on average, up to 2.46x at p99, over teacher-only greedy decoding in the fused-kernel performance path. We also provide a fused-kernel-free reference path with structured traces and invariant checks to support reproducible debugging and ablation across execution modes and tree budgets.

Long-context inference for Large Language Models (LLMs) is heavily limited by high computational demands. While several existing methods optimize attention computation, they still process the full set of hidden states at each layer, limiting overall efficiency. In this work, we propose SlimInfer, an innovative framework that aims to accelerate inference by directly pruning less critical prompt tokens during the forward pass. Our key insight is an information diffusion phenomenon: As information from critical tokens propagates through layers, it becomes distributed across the entire sequence. This diffusion process suggests that LLMs can maintain their semantic integrity when excessive tokens, even including these critical ones, are pruned in hidden states. Motivated by this, SlimInfer introduces a dynamic fine-grained pruning mechanism that accurately removes redundant tokens of hidden state at intermediate layers. This layer-wise pruning naturally enables an asynchronous KV cache manager that prefetches required token blocks without complex predictors, reducing both memory usage and I/O costs. Extensive experiments show that SlimInfer can achieve up to 2.53times time-to-first-token (TTFT) speedup and 1.88times end-to-end latency reduction for LLaMA3.1-8B-Instruct on a single RTX 4090, without sacrificing performance on LongBench. Our code will be released upon acceptance.

Intermediate Representations (IRs) play a critical role in compiler design and program analysis, yet their comprehension by Large Language Models (LLMs) remains underexplored. In this paper, we present an explorative empirical study evaluating the capabilities of six state-of-the-art LLMs: GPT-4, GPT-3, DeepSeek, Gemma 2, Llama 3, and Code Llama, in understanding IRs. Specifically, we assess model performance across four core tasks: control flow graph reconstruction, decompilation, code summarization, and execution reasoning. While LLMs exhibit competence in parsing IR syntax and identifying high-level structures, they consistently struggle with instruction-level reasoning, especially in control flow reasoning, loop handling, and dynamic execution. Common failure modes include misinterpreting branching instructions, omitting critical operations, and relying on heuristic reasoning rather than precise instruction-level logic. Our findings highlight the need for IR-specific enhancements in LLM design. We recommend fine-tuning on structured IR datasets and integrating control-flow-sensitive architectures to improve model effectiveness. All experimental data and source code are publicly available at

While Transformers and other sequence-parallelizable neural network architectures seem like the current state of the art in sequence modeling, they specifically lack state-tracking capabilities. These are important for time-series tasks and logical reasoning. Traditional RNNs like LSTMs and GRUs, as well as modern variants like sLSTM do have these capabilities at the cost of strictly sequential processing. While this is often seen as a strong limitation, we show how fast these networks can get with our hardware-optimization FlashRNN in Triton and CUDA, optimizing kernels to the register level on modern GPUs. We extend traditional RNNs with a parallelization variant that processes multiple RNNs of smaller hidden state in parallel, similar to the head-wise processing in Transformers. To enable flexibility on different GPU variants, we introduce a new optimization framework for hardware-internal cache sizes, memory and compute handling. It models the hardware in a setting using polyhedral-like constraints, including the notion of divisibility. This speeds up the solution process in our ConstrINT library for general integer constraint satisfaction problems (integer CSPs). We show that our kernels can achieve 50x speed-ups over a vanilla PyTorch implementation and allow 40x larger hidden sizes compared to our Triton implementation. Our open-source kernels and the optimization library are released here to boost research in the direction of state-tracking enabled RNNs and sequence modeling: https://github.com/NX-AI/flashrnn

Inference of Large Language Models (LLMs) across computer clusters has become a focal point of research in recent times, with many acceleration techniques taking inspiration from CPU speculative execution. These techniques reduce bottlenecks associated with memory bandwidth, but also increase end-to-end latency per inference run, requiring high speculation acceptance rates to improve performance. Combined with a variable rate of acceptance across tasks, speculative inference techniques can result in reduced performance. Additionally, pipeline-parallel designs require many user requests to maintain maximum utilization. As a remedy, we propose PipeInfer, a pipelined speculative acceleration technique to reduce inter-token latency and improve system utilization for single-request scenarios while also improving tolerance to low speculation acceptance rates and low-bandwidth interconnects. PipeInfer exhibits up to a 2.15times improvement in generation speed over standard speculative inference. PipeInfer achieves its improvement through Continuous Asynchronous Speculation and Early Inference Cancellation, the former improving latency and generation speed by running single-token inference simultaneously with several speculative runs, while the latter improves speed and latency by skipping the computation of invalidated runs, even in the middle of inference.

The Key-Value (KV) cache is crucial for efficient Large Language Models (LLMs) inference, but excessively long contexts drastically increase KV cache memory footprint. Existing KV cache compression methods typically rely on input-side attention patterns within a prompt observation window to estimate token importance during the prefill stage. They fail to preserve critical tokens for future generation since these assessments are not derived from the decoding process. Intuitively, an effective observation window should mirror the decoding-stage queries to accurately reflect which tokens the generation process will attend to. However, ground-truth decoding queries are inherently unavailable during inference. For constructing pseudo queries to approximate them, we find that positional information plays a more critical role than semantic content. Motivated by this insight, we propose decoding-aligned KV cache compression via position-aware pseudo queries (DapQ), a novel and lightweight eviction framework that leverages position-aware pseudo queries to simulate the output tokens, thereby establishing an effective observation window for importance assessment. It aligns closely with the actual generation context and enables precise token eviction. Extensive evaluations across multiple benchmarks and LLMs demonstrate that DapQ achieves superior performance, particularly under strict memory constraints (e.g., up to nearly lossless performance 99.5% on NIAH with 3% KV cache budgets).

We present egglog, a fixpoint reasoning system that unifies Datalog and equality saturation (EqSat). Like Datalog, it supports efficient incremental execution, cooperating analyses, and lattice-based reasoning. Like EqSat, it supports term rewriting, efficient congruence closure, and extraction of optimized terms. We identify two recent applications--a unification-based pointer analysis in Datalog and an EqSat-based floating-point term rewriter--that have been hampered by features missing from Datalog but found in EqSat or vice-versa. We evaluate egglog by reimplementing those projects in egglog. The resulting systems in egglog are faster, simpler, and fix bugs found in the original systems.

Code completion has become a central task, gaining significant attention with the rise of large language model (LLM)-based tools in software engineering. Although recent advances have greatly improved LLMs' code completion abilities, evaluation methods have not advanced equally. Most current benchmarks focus solely on functional correctness of code completions based on given context, overlooking models' ability to follow user instructions during completion-a common scenario in LLM-assisted programming. To address this limitation, we present the first instruction-guided code completion benchmark, Controllable Code Completion Benchmark (C3-Bench), comprising 2,195 carefully designed completion tasks. Through comprehensive evaluation of over 40 mainstream LLMs across C3-Bench and conventional benchmarks, we reveal substantial gaps in instruction-following capabilities between open-source and advanced proprietary models during code completion tasks. Moreover, we develop a straightforward data synthesis pipeline that leverages Qwen2.5-Coder to generate high-quality instruction-completion pairs for supervised fine-tuning (SFT). The resulting model, Qwen2.5-Coder-C3, achieves state-of-the-art performance on C3-Bench. Our findings provide valuable insights for enhancing LLMs' code completion and instruction-following capabilities, establishing new directions for future research in code LLMs. To facilitate reproducibility and foster further research in code LLMs, we open-source all code, datasets, and models.

This paper presents a program logic for reasoning about multithreaded Java-like programs with dynamic thread creation, thread joining and reentrant object monitors. The logic is based on concurrent separation logic. It is the first detailed adaptation of concurrent separation logic to a multithreaded Java-like language. The program logic associates a unique static access permission with each heap location, ensuring exclusive write accesses and ruling out data races. Concurrent reads are supported through fractional permissions. Permissions can be transferred between threads upon thread starting, thread joining, initial monitor entrancies and final monitor exits. In order to distinguish between initial monitor entrancies and monitor reentrancies, auxiliary variables keep track of multisets of currently held monitors. Data abstraction and behavioral subtyping are facilitated through abstract predicates, which are also used to represent monitor invariants, preconditions for thread starting and postconditions for thread joining. Value-parametrized types allow to conveniently capture common strong global invariants, like static object ownership relations. The program logic is presented for a model language with Java-like classes and interfaces, the soundness of the program logic is proven, and a number of illustrative examples are presented.

To mitigate the Memory Wall bottleneck encountered by Large Language Models (LLMs) during inference on NPU hardware, and addressing the scarcity of native support for mainstream speculative decoding algorithms on domestic infrastructure, this study presents an end-to-end speculative inference acceleration scheme for OpenPangu-7B.

KV cache compression promises increased throughput and efficiency with negligible loss in performance. While the gains in throughput are indisputable and recent literature has indeed shown minimal degradation on particular benchmarks, in general the consequences of compression in realistic scenarios such as multi-instruction prompting have been insufficiently studied. In this paper, we identify several pitfalls practitioners should be aware of when deploying KV cache compressed LLMs. Importantly, we show that certain instructions degrade much more rapidly with compression, effectively causing them to be completely ignored by the LLM. As a practical example of that, we highlight system prompt leakage as a case study, empirically showing the impact of compression on leakage and general instruction following. We show several factors that play a role in prompt leakage: compression method, instruction order, and KV eviction bias. We then propose simple changes to KV cache eviction policies that can reduce the impact of these factors and improve the overall performance in multi-instruction tasks.

Semantic caching cuts LLM inference costs by serving a cached response to semantically similar queries. Standard practice evaluates these systems using PR-AUC, a metric that only measures how well scores rank and ignores whether they are usable at a fixed threshold. We show this mismatch leads to systematically poor deployment choices, as models with the highest PR-AUC are often the worst in operation. We introduce Precision-Cache Hit Ratio (P-CHR) AUC, a cache-aware metric that measures precision across cache utilization levels, and Calibration Retention Rate (CRR), which captures how much offline ranking quality survives at deployment. We decompose the operational gap between offline and deployed quality into a recoverable calibration component and an irreducible structural component fixed by the dataset's positive rate. Our experiments show that the calibration gap is governed by the training objective rather than data scale, and post-hoc calibration only partially closes it. Ultimately, model selection for semantic caching is a calibration problem, not a ranking one, and measuring it is the first step to closing the gap.

Scaling language models to long contexts is often bottlenecked by the size of the key-value (KV) cache. In deployed settings, long contexts are typically managed through compaction in token space via summarization. However, summarization can be highly lossy, substantially harming downstream performance. Recent work on Cartridges has shown that it is possible to train highly compact KV caches in latent space that closely match full-context performance, but at the cost of slow and expensive end-to-end optimization. This work describes an approach for fast context compaction in latent space through Attention Matching, which constructs compact keys and values to reproduce attention outputs and preserve attention mass at a per-KV-head level. We show that this formulation naturally decomposes into simple subproblems, some of which admit efficient closed-form solutions. Within this framework, we develop a family of methods that significantly push the Pareto frontier of compaction time versus quality, achieving up to 50x compaction in seconds on some datasets with little quality loss.

We introduce a new heuristic decoder, Relay-BP, targeting real-time quantum circuit decoding for large-scale quantum computers. Relay-BP achieves high accuracy across circuit-noise decoding problems: significantly outperforming BP+OSD+CS-10 for bivariate-bicycle codes and comparable to min-weight-matching for surface codes. As a lightweight message-passing decoder, Relay-BP is inherently parallel, enabling rapid low-footprint decoding with FPGA or ASIC real-time implementations, similar to standard BP. A core aspect of our decoder is its enhancement of the standard BP algorithm by incorporating disordered memory strengths. This dampens oscillations and breaks symmetries that trap traditional BP algorithms. By dynamically adjusting memory strengths in a relay approach, Relay-BP can consecutively encounter multiple valid corrections to improve decoding accuracy. We observe that a problem-dependent distribution of memory strengths that includes negative values is indispensable for good performance.

Long-context LLM inference is bottlenecked by the quadratic attention complexity and linear KV cache growth. Prior approaches mitigate this via post-hoc selection or eviction but overlook the root inefficiency: indiscriminate writing to memory. In this paper, we formalize KV cache management as a causal system of three primitives: KV Admission, Selection, and Eviction. We instantiate KV Admission via Write-Gated KV (WG-KV), a lightweight mechanism that learns to predict token utility before cache entry. By filtering out low-utility states early to maintain a compact global cache alongside a sliding local cache, WG-KV reduces memory usage by 46-68% and delivers 3.03-3.70x prefill and 1.85-2.56x decode speedups on Llama and Qwen models, while maintaining compatibility with FlashAttention and Paged-KV systems. These results demonstrate that learning what to write is a principled and practical recipe for efficient long-context inference. Code is available at https://github.com/EMCLab-Sinica/WG-KV.

In the training of large language models, momentum is widely used and often demonstrated to achieve significant acceleration. However, storing momentum typically presents memory challenges. In this paper, we propose AdaPM, an adaptive training strategy that leverages partial momentum to implement a memory-efficient optimizer. To this end, AdaPM utilizes a non-uniform momentum design: for most blocks, full momentum is not necessary to preserve the performance of the optimization. In the momentum design of AdaPM, to mitigate the bias and performance loss caused by partial momentum, we enhance the partial momentum by a bias correction technique. Empirically, we verify that our approach reduces memory by over 90% in momentum while maintaining both efficiency and performance for pretraining various language models ranging from 60M to 1.5B, as well as for supervised fine-tuning and RLHF. AdaPM can further reduce memory by up to 95% in optimizer states by combining the memory-efficient technique on the second-order statistic, saving over 30% GPU hours for pretraining GPT-2 1.5B.

Large Language Models (LLMs) are fundamentally constrained by the quadratic computational cost of self-attention and the "Lost in the Middle" phenomenon, where reasoning capabilities degrade as context windows expand. Existing solutions, primarily "Flat RAG" architectures relying on vector databases, treat memory as an unstructured bag of embeddings, failing to capture the hierarchical and temporal structure of long-horizon interactions. This paper presents Aeon, a Neuro-Symbolic Cognitive Operating System that redefines memory as a managed OS resource. Aeon structures memory into a Memory Palace (a spatial index implemented via Atlas, a SIMD-accelerated Page-Clustered Vector Index) and a Trace (a neuro-symbolic episodic graph). This architecture introduces three advances: (1) Symmetric INT8 Scalar Quantization, achieving 3.1x spatial compression and 5.6x math acceleration via NEON SDOT intrinsics; (2) a decoupled Write-Ahead Log (WAL) ensuring crash-recoverability with statistically negligible overhead (<1%); and (3) a Sidecar Blob Arena eliminating the prior 440-character text ceiling via an append-only mmap-backed blob file with generational garbage collection. The Semantic Lookaside Buffer (SLB) exploits conversational locality to achieve sub-5us retrieval latencies, with INT8 vectors dequantized to FP32 on cache insertion to preserve L1-resident lookup performance. Benchmarks on Apple M4 Max demonstrate that the combined architecture achieves 4.70ns INT8 dot product latency, 3.09us tree traversal at 100K nodes (3.4x over FP32), and P99 read latency of 750ns under hostile 16-thread contention via epoch-based reclamation.

Linear attention has recently gained significant attention for long-context inference due to its constant decoding cost with respect to context length. However, existing serving systems typically serve linear attention by recurrently computing and updating a large linear attention state in every decoding step. Since the state is much larger than the per-token key and value, recurrent decoding incurs substantial memory access and becomes inefficient for serving linear attention. In this paper, we propose KVBuffer, an IO-aware serving mechanism for linear attention. By buffering recent keys and values, KVBuffer enables serving systems to compute linear attention outputs in more flexible and memory-efficient ways. For decoding, KVBuffer enables chunkwise computation, which reduces average memory access and decoding latency by deferring state updates and applying them in batch. For speculative decoding, KVBuffer verifies draft tokens in parallel and avoids storing temporary states. For short contexts, KVBuffer computes attention outputs directly from buffered keys and values, without creating or updating the linear attention state. We implement KVBuffer in SGLang for Qwen3-Next. Our evaluations show that KVBuffer can reduce linear attention decoding latency by up to 45.17% and increase the maximum number of serving requests by 5x for speculative decoding when verifying four draft tokens.

With the growing demand for applying large language models to downstream tasks, improving model alignment performance and efficiency has become crucial. Such a process involves selecting informative instructions from a candidate pool. However, due to the complexity of instruction set distributions, the key factors driving the performance of aligned models remain unclear. As a result, current instruction set refinement methods fail to improve performance as the instruction pool expands continuously. To address this issue, we first investigate the key factors that influence the relationship between instruction dataset distribution and aligned model performance. Based on these insights, we propose a novel instruction data selection method. We identify that the depth of instructions and the coverage of the semantic space are the crucial factors determining downstream performance, which could explain over 70\% of the model loss on the development set. We then design an instruction selection algorithm to simultaneously maximize the depth and semantic coverage of the selected instructions. Experimental results demonstrate that, compared to state-of-the-art baseline methods, it can sustainably improve model performance at a faster pace and thus achieve ``Accelerated Scaling''.

Transformer models serve as the backbone of many state-ofthe-art language models, and most use the scaled dot-product attention (SDPA) mechanism to capture relationships between tokens. However, the straightforward implementation of SDPA has quadratic compute and memory complexity with respect to the sequence length. On processor architectures such as GPUs and TPUs, there is a robust body of prior work. However, little work has been performed on non-processor architectures.In this work, we show how the architecture and execution model of Streaming Dataflow Accelerators can help tackle this challenge. We first define abstract hardware that adopts a streaming execution model, and we implement a cycle-accurate simulator of the abstract hardware using the Dataflow Abstract Machine simulation framework. Second, we implement the naive SDPA algorithm on this abstract hardware and show it requires linear (O(N)) intermediate memory. Third, we then modify the naive algorithm, taking inspiration from prior processor-oriented works, by reordering the multiplication and division operations. Finally, we map the modified algorithm to abstract hardware, and confirm that the implementation computes SDPA at full throughput while only using a constant amount (O(1)) of intermediate memory.

As the demand for long-context large language models (LLMs) increases, models with context windows of up to 128K or 1M tokens are becoming increasingly prevalent. However, long-context LLM inference is challenging since the inference speed decreases significantly as the sequence length grows. This slowdown is primarily caused by loading a large KV cache during self-attention. Previous works have shown that a small portion of critical tokens will dominate the attention outcomes. However, we observe the criticality of a token highly depends on the query. To this end, we propose Quest, a query-aware KV cache selection algorithm. Quest keeps track of the minimal and maximal Key values in KV cache pages and estimates the criticality of a given page using Query vectors. By only loading the Top-K critical KV cache pages for attention, Quest significantly speeds up self-attention without sacrificing accuracy. We show that Quest can achieve up to 2.23x self-attention speedup, which reduces inference latency by 7.03x while performing well on tasks with long dependencies with negligible accuracy loss. Code is available at http://github.com/mit-han-lab/Quest .

Large language models (LLMs) have grown beyond the memory capacity of single GPU devices, necessitating quantization techniques for practical deployment. While NF4 (4-bit NormalFloat) quantization enables 4times memory reduction, inference on current NVIDIA GPUs (e.g., Ampere A100) requires expensive dequantization back to FP16 format, creating a critical performance bottleneck. This paper presents a lightweight shared memory optimization that addresses this gap through principled memory hierarchy exploitation while maintaining full ecosystem compatibility. We compare our technique against the open-source BitsAndBytes implementation, achieving 2.0--2.2times kernel speedup across three models (Gemma 27B, Qwen3 32B, and Llama3.3 70B) and up to 1.54times end-to-end improvement by leveraging the 12--15times latency advantage of shared memory over global memory access. Our optimization reduces instruction counts through simplified indexing logic while using only 64 bytes of shared memory per thread block, demonstrating that lightweight optimizations can deliver substantial performance gains with minimal engineering effort. This work provides a plug-and-play solution for the HuggingFace ecosystem that democratizes access to advanced models on existing GPU infrastructure.

Memory is a fundamental component for enabling long-context LLM agents, supporting persistent state across interactions through a continuous serve-and-update lifecycle. Despite substantial prior work, existing systems suffer from significant maintenance overhead due to two key limitations: coarse-grained state management and inherently sequential update pipelines. In particular, updates are often tightly coupled with LLM inference and require full-state rewrites, leading to poor scalability and growing latency as memory accumulates. To address these challenges, we present MemForest, a memory framework that reformulates agent memory as a write-efficient temporal data management problem. MemForest breaks the sequential bottleneck via parallel chunk extraction, decoupling memory construction into concurrent, independent operations. To further eliminate coarse-grained maintenance, we introduce MemTree, a hierarchical temporal index that organizes memory as time-ordered trees rather than flat global summaries. This design replaces full-state rewrites with localized per-node updates, reducing maintenance cost to the affected tree paths while naturally preserving temporally evolving states. We evaluate MemForest on two long-context memory benchmarks, LongMemEval-S and LoCoMo. On LongMemEval-S, MemForest achieves the best overall performance among stateful baselines, reaching 79.8% pass@1 accuracy while sustaining a memory construction throughput approximately 6x higher than state-of-the-art approaches including EverMemOS.

Test-time scaling (TTS) boosts LLM reasoning via long chain-of-thought (CoT), but the linear KV-cache growth amplifies the memory-bound bottleneck of LLM decoding. Query-aware page-level sparse decoding can achieve state-of-the-art performance under constrained FLOPs budgets, but is limited by both sequential-dependent page filtering and coarse-grained token selection, hampering serving efficiency and model performance on TTS tasks under high concurrency and long CoT scenarios (consuming even higher runtime than the forward pipeline itself). In this paper, we first find that the current-step query state can be accurately approximated in a unified manner from a short window of recent queries, enabling training-free query-aware sparsity without waiting in the decoding loop. We propose AsyncSpade, an asynchronous framework for efficient TTS built on two core components: (1) a novel light-weight temporal-regressive module that predicts the next-token query state; (2) an asynchronous and disaggregated framework that decouples the KV cache filtering from the auto-regressive decoding loop, overlapping the token-level KV selection with the forward inference computation through asynchronism. To our knowledge, AsyncSpade is the first to eliminate the sequential dependence without sacrificing model performance. We validate the effectiveness of AsyncSpade on common LLM serving setups with an A100 node, where AsyncSpade fully overlaps KV-cache operations with the inference pipeline, achieving theoretical optimal time-per-output-token (TPOT). Specifically, AsyncSpade delivers over 20% reduction on TPOT compared to SoTA baseline (i.e. Quest) and at least 50% TPOT reduction compared to full attention on Qwen3-8B and Qwen3-32B models, while matching or surpassing their accuracy on various TTS benchmarks (AIME-24/25, GPQA-Diamond, MATH-500).

We introduce self-invoking code generation, a new task designed to evaluate the progressive reasoning and problem-solving capabilities of LLMs. In this task, models are presented with a base problem and a related, more complex problem. They must solve the base problem and then utilize its solution to address the more complex one. This work features three key contributions. First, we propose a general recipe for generating more challenging versions of existing benchmarks, resulting in three new benchmarks: HumanEval Pro, MBPP Pro, and BigCodeBench-Lite Pro, specifically designed to assess LLMs on self-invoking code generation. Second, from the analysis of experimental results over twenty LLMs on our benchmarks, we have two important observations: (i) Most LLMs excel in traditional code generation benchmarks like HumanEval and MBPP, but their performance declines on self-invoking tasks. For example, o1-mini achieves 96.2% pass@1 on HumanEval but only 76.2% on HumanEval Pro. (ii) On self-invoking code generation task, the instruction-tuned models demonstrate only marginal improvements compared to the base models. Third, we disclose the types of failure modes that exist in our evaluation results. All these results underscore the need for further advancements in self-invoking code generation tasks and provide a new direction for future research on enhancing LLMs' code reasoning capabilities.

Large Language Models (LLMs) have shown remarkable results on various complex reasoning benchmarks. The reasoning capabilities of LLMs enable them to execute function calls, using user-provided functions to overcome their inherent limitations, such as knowledge cutoffs, poor arithmetic skills, or lack of access to private data. This development has expanded LLMs' scope to include multi-function calling, where LLMs are equipped with a variety of functions and select the proper functions based on the context. Multi-function calling abilities of LLMs have catalyzed LLM-based software development, allowing them to tackle more complex problems. However, current methods for multi-function calling often require sequential reasoning and acting for each function which can result in high latency, cost, and sometimes inaccurate behavior. To address this, we introduce LLMCompiler, which executes functions in parallel to efficiently orchestrate multi-function calling. Drawing from the principles of classical compilers, LLMCompiler streamlines parallel function calling with three components: (i) an LLM Planner, formulating execution strategies and dependencies; (ii) a Task Fetching Unit, dispatching function calling tasks; and (iii) an Executor, executing these tasks in parallel. LLMCompiler automatically computes an optimized orchestration for the function calls and can be used with open-source models such as LLaMA-2. We have benchmarked LLMCompiler on a range of tasks including cases with non-trivial inter-dependency between function calls, as well as cases that require dynamic replanning based on intermediate results. We observe consistent latency speedup of up to 3.7x, cost savings of up to 6.7x, and accuracy improvement of up to ~9% as compared to ReAct. Additionally, LLMCompiler achieves up to 1.35x latency gain over OpenAI's recent parallel function calling, while achieving similar accuracy.

Automated Program Repair (APR) is a task to automatically generate patches for the buggy code. However, most research focuses on generating correct patches while ignoring the consistency between the fixed code and the original buggy code. How to conduct adaptive bug fixing and generate patches with minimal modifications have seldom been investigated. To bridge this gap, we first introduce a novel task, namely AdaPR (Adaptive Program Repair). We then propose a two-stage approach AdaPatcher (Adaptive Patch Generator) to enhance program repair while maintaining the consistency. In the first stage, we utilize a Bug Locator with self-debug learning to accurately pinpoint bug locations. In the second stage, we train a Program Modifier to ensure consistency between the post-modified fixed code and the pre-modified buggy code. The Program Modifier is enhanced with a location-aware repair learning strategy to generate patches based on identified buggy lines, a hybrid training strategy for selective reference and an adaptive preference learning to prioritize fewer changes. The experimental results show that our approach outperforms a set of baselines by a large margin, validating the effectiveness of our two-stage framework for the newly proposed AdaPR task.

Large Language Models (LLMs) can enhance reasoning capabilities through test-time scaling by generating multiple traces. However, the combination of lengthy reasoning traces with multiple sampling introduces substantial computation and high end-to-end latency. Prior work on accelerating this process has relied on similarity-based or confidence-based pruning, but these signals do not reliably indicate trace quality. To address these limitations, we propose STEP: Step-level Trace Evaluation and Pruning, a novel pruning framework that evaluates reasoning steps using hidden states and dynamically prunes unpromising traces during generation. We train a lightweight step scorer to estimate trace quality, and design a GPU memory-aware pruning strategy that triggers pruning as the GPU memory is saturated by KV cache to reduce end-to-end latency. Experiments across challenging reasoning benchmarks demonstrate that STEP reduces end-to-end inference latency by 45%-70% on average compared to self-consistency while also improving reasoning accuracy. Our code is released at: https://github.com/Supercomputing-System-AI-Lab/STEP

Semantic top-K selection with cross-encoder rerankers underpins of on-device AI services, such as retrieval-augmented generation, agent memory, and personalized recommendation. However, its latency and memory demands dominate end-to-end budgets on edge hardware. Revisiting the objective of top-K selection, we reveal that only relative rankings matter, not exact per-candidate scores. We further observe sequence-level sparsity: relative rankings stabilize early in intermediate layers, allowing pruning opportunities prior to completing full inference. Building on this insight, we propose monolithic forwarding and develop a training-free inference system, GRATING. By maintaining a global view of all candidates, it reduces latency through progressive cluster pruning. It also bounds peak memory usage by strategically overlapping I/O with computation via dual-layer sliding window and chunked execution. We evaluate GRATING against state-of-the-art baselines on rerankers from 0.6B to 8B parameters across Apple M2 and RTX 5070. GRATING consistently reduces latency by up to 89.0% and peak memory by up to 94.9% in microbenchmarks, without any loss in precision. Across three real-world on-device AI applications, GRATING lowers latency by 11.6%-51.0% and peak memory by 18.6%-77.8%, demonstrating substantial improvements in efficiency and deployability.

Large Language Models (LLMs) have demonstrated exceptional performance across diverse domains but are increasingly constrained by high inference latency. Early Exit has emerged as a promising solution to accelerate inference by dynamically bypassing redundant layers. However, in decoder-only architectures, the efficiency of Early Exit is severely bottlenecked by the KV Cache Absence problem, where skipped layers fail to provide the necessary historical states for subsequent tokens. Existing solutions, such as recomputation or masking, either introduce significant latency overhead or incur severe precision loss, failing to bridge the gap between theoretical layer reduction and practical wall-clock speedup. In this paper, we propose River-LLM, a training-free framework that enables seamless token-level Early Exit. River-LLM introduces a lightweight KV-Shared Exit River that allows the backbone's missing KV cache to be naturally generated and preserved during the exit process, eliminating the need for costly recovery operations. Furthermore, we utilize state transition similarity within decoder blocks to predict cumulative KV errors and guide precise exit decisions. Extensive experiments on mathematical reasoning and code generation tasks demonstrate that River-LLM achieves 1.71 to 2.16 times of practical speedup while maintaining high generation quality.

In this paper, we offer a guide for researchers on evaluating reasoning in language models, building the case that reasoning should be assessed through evidence of adaptive, multi-step search rather than final-answer accuracy alone. Under an evaluation-oriented definition, reasoning requires selecting intermediate steps and halting according to input-dependent conditions, which we formalize as a search-like procedure. We show that single forward passes in scalable architectures are structurally limited in their ability to realize such variable-depth computation, motivating intermediate decoding and externalized reasoning traces as appropriate evaluation interfaces. Central to our argument is that final-answer accuracy alone is an insufficient measure of reasoning, because it provides little ability to diagnose or debug the underlying processes that produce individual solutions in frontier models. We therefore argue for a shift toward process-based evaluation, in which reasoning is assessed through the faithfulness and validity of intermediate reasoning traces as first-class evaluation targets.

Real-world applications require the classification model to adapt to new classes without forgetting old ones. Correspondingly, Class-Incremental Learning (CIL) aims to train a model with limited memory size to meet this requirement. Typical CIL methods tend to save representative exemplars from former classes to resist forgetting, while recent works find that storing models from history can substantially boost the performance. However, the stored models are not counted into the memory budget, which implicitly results in unfair comparisons. We find that when counting the model size into the total budget and comparing methods with aligned memory size, saving models do not consistently work, especially for the case with limited memory budgets. As a result, we need to holistically evaluate different CIL methods at different memory scales and simultaneously consider accuracy and memory size for measurement. On the other hand, we dive deeply into the construction of the memory buffer for memory efficiency. By analyzing the effect of different layers in the network, we find that shallow and deep layers have different characteristics in CIL. Motivated by this, we propose a simple yet effective baseline, denoted as MEMO for Memory-efficient Expandable MOdel. MEMO extends specialized layers based on the shared generalized representations, efficiently extracting diverse representations with modest cost and maintaining representative exemplars. Extensive experiments on benchmark datasets validate MEMO's competitive performance. Code is available at: https://github.com/wangkiw/ICLR23-MEMO

Finding the optimal pass sequence of compilation can lead to a significant reduction in program size and/or improvement in program efficiency. Prior works on compilation pass ordering have two major drawbacks. They either require an excessive budget (in terms of compilation steps) at compile time or fail to generalize to unseen programs. In this paper, for code-size reduction tasks, we propose a novel pipeline to find program-dependent pass sequences within 45 compilation calls. It first identifies a coreset of 50 pass sequences via greedy optimization of a submodular function, and then learns a policy with Graph Neural Network (GNN) to pick the optimal sequence by predicting the normalized values of the pass sequences in the coreset. Despite its simplicity, our pipeline outperforms the default -Oz flag by an average of 4.7% over a large collection (4683) of unseen code repositories from diverse domains across 14 datasets. In comparison, previous approaches like reinforcement learning on the raw pass sequence space may take days to train due to sparse reward, and may not generalize well in held-out ones from different domains. Our results demonstrate that existing human-designed compiler flags can be improved with a simple yet effective technique that transforms the raw action space into a small one with denser rewards.

Efficient use of GPU memory is essential for high throughput LLM inference. Prior systems reserved memory for the KV-cache ahead-of-time, resulting in wasted capacity due to internal fragmentation. Inspired by OS-based virtual memory systems, vLLM proposed PagedAttention to enable dynamic memory allocation for KV-cache. This approach eliminates fragmentation, enabling high-throughput LLM serving with larger batch sizes. However, to be able to allocate physical memory dynamically, PagedAttention changes the layout of KV-cache from contiguous virtual memory to non-contiguous virtual memory. This change requires attention kernels to be rewritten to support paging, and serving framework to implement a memory manager. Thus, the PagedAttention model leads to software complexity, portability issues, redundancy and inefficiency. In this paper, we propose vAttention for dynamic KV-cache memory management. In contrast to PagedAttention, vAttention retains KV-cache in contiguous virtual memory and leverages low-level system support for demand paging, that already exists, to enable on-demand physical memory allocation. Thus, vAttention unburdens the attention kernel developer from having to explicitly support paging and avoids re-implementation of memory management in the serving framework. We show that vAttention enables seamless dynamic memory management for unchanged implementations of various attention kernels. vAttention also generates tokens up to 1.97x faster than vLLM, while processing input prompts up to 3.92x and 1.45x faster than the PagedAttention variants of FlashAttention and FlashInfer.

Token-level code completion is one of the most critical features in modern Integrated Development Environments (IDEs). It assists developers by suggesting relevant identifiers and APIs during coding. While completions are typically derived from static analysis, their usefulness depends heavily on how they are ranked, as correct predictions buried deep in the list are rarely seen by users. Most current systems rely on hand-crafted heuristics or lightweight machine learning models trained on user logs, which can be further improved to capture context information and generalize across projects and coding styles. In this work, we propose a new scoring approach to ranking static completions using language models in a lightweight and model-agnostic way. Our method organizes all valid completions into a prefix tree and performs a single greedy decoding pass to collect token-level scores across the tree. This enables a precise token-aware ranking without needing beam search, prompt engineering, or model adaptations. The approach is fast, architecture-agnostic, and compatible with already deployed models for code completion. These findings highlight a practical and effective pathway for integrating language models into already existing tools within IDEs, and ultimately providing smarter and more responsive developer assistance.

High-Level Synthesis leverages loop unrolling and array partitioning, but scheduling concurrent accesses is challenging when indices contain non-affine arithmetic. Conventional polyhedral frameworks systematically over-approximate these non-linear transformations, forcing conservative serialization that degrades performance. To minimize this bottleneck, we present a spatial verification framework operating at the LLVM Intermediate Representation (IR) level. By extracting flat arithmetic expressions from "getelementptr" instructions, it models memory banks as polymorphic spatial predicates to handle non-affine terms. Structural safety is enforced via a Conflict-Free Unrolling condition using Separation Logic's separating conjunction; concurrent operations targeting the same bank trigger an automatic spatial contradiction. This disjointness requirement is reduced to a matrix of pairwise inequalities over immutable Static Single Assignment (SSA) variables for a Satisfiability Modulo Theories (SMT) oracle. To guarantee safety against undecidable non-linear arithmetic, we implement a deterministic sequential fallback. Finally, a theorem of soundness bridges algebraic SMT verification with Register Transfer Level trace safety, ensuring physical hardware immune to structural memory collisions.

Pre-routing timing prediction has been recently studied for evaluating the quality of a candidate cell placement in chip design. It involves directly estimating the timing metrics for both pin-level (slack, slew) and edge-level (net delay, cell delay), without time-consuming routing. However, it often suffers from signal decay and error accumulation due to the long timing paths in large-scale industrial circuits. To address these challenges, we propose a two-stage approach. First, we propose global circuit training to pre-train a graph auto-encoder that learns the global graph embedding from circuit netlist. Second, we use a novel node updating scheme for message passing on GCN, following the topological sorting sequence of the learned graph embedding and circuit graph. This scheme residually models the local time delay between two adjacent pins in the updating sequence, and extracts the lookup table information inside each cell via a new attention mechanism. To handle large-scale circuits efficiently, we introduce an order preserving partition scheme that reduces memory consumption while maintaining the topological dependencies. Experiments on 21 real world circuits achieve a new SOTA R2 of 0.93 for slack prediction, which is significantly surpasses 0.59 by previous SOTA method. Code will be available at: https://github.com/Thinklab-SJTU/EDA-AI.

Rewriting C code in Rust provides stronger memory safety, yet migrating large codebases such as the 32-million-line Linux kernel remains challenging. While rule-based translators (e.g., C2Rust) provide accurate yet largely unsafe Rust programs, recent Large Language Model (LLM) approaches produce more idiomatic, safe Rust programs but frequently exhibit "laziness", omitting significant portions of the target code. To address the issue, in this paper, we present LLMigrate, an LLM-based C-to-Rust translation tool that splits modules into discrete functions, translating them individually, and then reintegrating them. LLMigrate uses static analysis to retain necessary context, pairs GPT-4o (a state-of-the-art LLM) with compiler-driven translation and program-repair techniques for complex core functions, and leverages call-graph-guided translation to ensure consistent interfaces. Evaluations on three representative Linux kernel modules (math, sort, and ramfs) show that LLMigrate requires modifying less than 15\% of the target code, significantly outperforming a pure GPT-4o-based migration.

The KV cache is a dominant memory bottleneck for LLM inference. While 4-bit KV quantization preserves accuracy, 2-bit often degrades it, especially on long-context reasoning. We close this gap via an algorithm-system co-design for mixed-precision KV caching: Kitty. On the algorithm side, extensive experiments show that Dynamic Channel-wise Precision Boost -- which ranks Key-cache channels by sensitivity and keeps only a small fraction at higher precision -- maintains near-zero loss in accuracy drop while approaching 2-bit memory. The main challenge is handling dynamic 4-bit channel boosts while keeping the page layout coalesced and the dequantization uniform, with no scattered reads or hard-coded masks. Kitty addresses these issues by decompose each mixed-precision Key page into two tensors with unified 2-bit precision. Based on this, Kitty provides a page-centric KV layout, Triton-compatible page dequantization kernels, and a lightweight runtime pipeline that preserves coalescing and avoids divergence. Across seven tasks and two model families (Qwen3, LLaMA3), Kitty cuts KV memory by nearly 8x with negligible accuracy loss, enabling up to 8x larger batches and 2.1x-4.1x higher throughput under the same memory budget. We release the full implementation of Kitty at https://github.com/Summer-Summer/Kitty.

Translating software written in legacy languages to modern languages, such as C to Rust, has significant benefits in improving memory safety while maintaining high performance. However, manual translation is cumbersome, error-prone, and produces unidiomatic code. Large language models (LLMs) have demonstrated promise in producing idiomatic translations, but offer no correctness guarantees as they lack the ability to capture all the semantics differences between the source and target languages. To resolve this issue, we propose SACTOR, an LLM-driven C-to-Rust zero-shot translation tool using a two-step translation methodology: an "unidiomatic" step to translate C into Rust while preserving semantics, and an "idiomatic" step to refine the code to follow Rust's semantic standards. SACTOR utilizes information provided by static analysis of the source C program to address challenges such as pointer semantics and dependency resolution. To validate the correctness of the translated result from each step, we use end-to-end testing via the foreign function interface to embed our translated code segment into the original code. We evaluate the translation of 200 programs from two datasets and two case studies, comparing the performance of GPT-4o, Claude 3.5 Sonnet, Gemini 2.0 Flash, Llama 3.3 70B and DeepSeek-R1 in SACTOR. Our results demonstrate that SACTOR achieves high correctness and improved idiomaticity, with the best-performing model (DeepSeek-R1) reaching 93% and (GPT-4o, Claude 3.5, DeepSeek-R1) reaching 84% correctness (on each dataset, respectively), while producing more natural and Rust-compliant translations compared to existing methods.

Delta-rule linear attention improves recurrent memory updates by correcting what is already stored at the current write address before writing new content. However, the active correction is still anchored to that same write address. As a result, stale information stored at a different address cannot be actively removed before new content is written elsewhere. We propose Erase-then-Delta Attention (EDA), a memory update rule that decouples where to erase from where to write. The key insight is that recurrent memory models should not only correct the current write, but also selectively suppress outdated memory at an independently chosen address. Concretely, our method first applies a targeted erase step along a learned erase direction, and then performs the standard delta-style corrective write along the current write direction. This preserves the corrective behavior of delta-rule updates while expanding their memory-management capacity. Language-model pretraining experiments across dense 2.5B and MoE 25B-A2.8B model families show that EDA performs best in both settings. The gain persists after 80B-token long-context midtraining of the MoE models, where EDA also performs best in long-context evaluations from 4k to 128k contexts. A compact update analysis and memory-state probes suggest why: EDA keeps the delta-rule corrective write intact while allocating an additional cleanup path most strongly when passive decay is weak. These results suggest that recurrent memory models should decide not only what to write, but also what stale information to erase and where.

While enabling large language models to implement function calling (known as APIs) can greatly enhance the performance of LLMs, function calling is still a challenging task due to the complicated relations between different APIs, especially in a context-learning setting without fine-tuning. This paper proposes a simple yet controllable target-driven approach called Reverse Chain to empower LLMs with capabilities to use external APIs with only prompts. Given that most open-source LLMs have limited tool-use or tool-plan capabilities, LLMs in Reverse Chain are only employed to implement simple tasks, e.g., API selection and argument completion, and a generic rule is employed to implement a controllable multiple functions calling. In this generic rule, after selecting a final API to handle a given task via LLMs, we first ask LLMs to fill the required arguments from user query and context. Some missing arguments could be further completed by letting LLMs select another API based on API description before asking user. This process continues until a given task is completed. Extensive numerical experiments indicate an impressive capability of Reverse Chain on implementing multiple function calling. Interestingly enough, the experiments also reveal that tool-use capabilities of the existing LLMs, e.g., ChatGPT, can be greatly improved via Reverse Chain.

Training-free acceleration has emerged as an advanced research area in video generation based on diffusion models. The redundancy of latents in diffusion model inference provides a natural entry point for acceleration. In this paper, we decompose the inference process into the encoding, denoising, and decoding stages, and observe that cache-based acceleration methods often lead to substantial memory surges in the latter two stages. To address this problem, we analyze the characteristics of inference across different stages and propose stage-specific strategies for reducing memory consumption: 1) Asynchronous Cache Swapping. 2) Feature chunk. 3) Slicing latents to decode. At the same time, we ensure that the time overhead introduced by these three strategies remains lower than the acceleration gains themselves. Compared with the baseline, our approach achieves faster inference speed and lower memory usage, while maintaining quality degradation within an acceptable range. The Code is available at https://github.com/NKUShaw/LightCache .

The Key-Value (KV) cache of Large Language Models (LLMs) is prefix-based, making it highly inefficient for processing contexts retrieved in arbitrary order. Position-Independent Caching (PIC) has been proposed to enable KV reuse without positional constraints; however, existing approaches often incur substantial accuracy degradation, limiting their practical adoption. To address this issue, we propose native PIC by reintroducing the encoder to prevalent decoder-only LLMs and explicitly training it to support PIC. We further develop COMB, a PIC-aware caching system that integrates seamlessly with existing inference frameworks. Experimental results show that COMB reduces Time-to-First-Token (TTFT) by 51-94% and increases throughput by 3times with comparable accuracy. Furthermore, the quality improvement when using DeepSeek-V2-Lite-Chat demonstrates the applicability of COMB to other types of decoder-only LLMs. Our code is available at https://github.com/shijuzhao/Comb.

Continual Instruction Tuning (CIT) is adopted to continually instruct Large Models to follow human intent data by data. It is observed that existing gradient update would heavily destroy the performance on previous datasets during CIT process. Instead, Exponential Moving Average (EMA), owns the ability to trace previous parameters, which can aid in decreasing forgetting. Nonetheless, its stable balance weight fails to deal with the ever-changing datasets, leading to the out-of-balance between plasticity and stability. In this paper, we propose a general continual instruction tuning framework to address the challenge. Starting from the trade-off prerequisite and EMA update, we propose the plasticity and stability ideal condition. Based on Taylor expansion in the loss function, we find the optimal balance weight can be automatically determined by the gradients and learned parameters. Therefore, we propose a stable-plasticity balanced coefficient to avoid knowledge interference. Based on the semantic similarity of the instructions, we can determine whether to retrain or expand the training parameters and allocate the most suitable parameters for the testing instances. Extensive experiments across multiple continual instruction tuning benchmarks demonstrate that our approach not only enhances anti-forgetting capabilities but also significantly improves overall continual tuning performance. Our code is available at https://github.com/JingyangQiao/CoIN.

Semi-Markov Conditional Random Fields (semi-CRFs) assign labels to segments of a sequence rather than to individual positions, enabling exact inference over segment-level features and principled uncertainty estimates at their boundaries. However, existing implementations must materialize a large edge potential tensor whose size grows with sequence length, maximum segment length, and label count, becoming prohibitive for speech-scale state spaces and intractable at genomic scales where sequences can exceed 100,000 positions. This memory bottleneck has limited the adoption of exact segment-level inference for long sequences and large label sets. We identify that the core inefficiency is materializing edge potentials that can instead be evaluated on-the-fly from a compact prefix-sum array, and make several improvements. First, replacing the stored edge tensor with prefix-sum lookup reduces the memory footprint by a factor proportional to the product of segment length and label count. Second, a streaming forward-backward pass with checkpoint-boundary normalization keeps working memory sublinear in sequence length while preserving exact gradients. Third, zero-centered cumulative scores control numerical drift and induce an adaptive duration prior under label imbalance. We integrate these ideas into Flash-SemiCRF, a fused Triton kernel that enables exact semi-CRF inference on previously intractable problem sizes. Available at https://github.com/biobenkj/flash-semicrf.

Large Language Models (LLMs) unlocked new possibilities in automated code writing, becoming the backbone of most code completion tools. While LLMs excel in mainstream languages, they often lack support for the so-called low-resource languages where training data is scarce. As a result, these languages lag behind in the quality of code completion tooling available to their communities. A concrete example is Pharo, a Smalltalk-inspired language whose IDE currently offers only single-token completion. In this work, we report on our experience bringing LLM-based code completion to Pharo. First, we describe an end-to-end pipeline that combines Pharo-specific data curation, continued pre-training and fine-tuning of open code LLMs. Second, we introduce a set of Pharo code completion benchmarks designed to evaluate whether models (i) learn Pharo's syntax and (ii) accurately complete masked Pharo code from real-world GitHub repositories. Third, we show empirically that Pharo-specialized models substantially outperform their original base checkpoints and also exceed the accuracy of substantially larger code LLMs on Pharo completion. Overall, our case study demonstrates the feasibility of bringing strong LLM-based code completion to low-resource programming languages, with models small enough to provide ``real-time'' in-IDE support.

Unlike code completion, debugging requires localizing faults and applying targeted edits. We observe that frontier LLMs often regenerate correct but over-edited solutions during debugging. To evaluate how far LLMs are from precise debugging, we introduce the Precise Debugging Benchmark (PDB) framework, which automatically converts any coding dataset into a debugging benchmark with precision-aware evaluation. PDB generates buggy programs by synthesizing verified atomic bugs and composing them into multi-bug programs. We define two novel metrics, edit-level precision and bug-level recall, which measures how many necessary edits are made and how many bugs are resolved. We release two evaluation benchmarks: PDB-Single-Hard on single-line bugs, and PDB-Multi on multi-line bugs. Experiments show that frontier models, such as GPT-5.1-Codex and DeepSeek-V3.2-Thinking, achieve unit-test pass rates above 76% but exhibit precision below 45%, even when explicitly instructed to perform minimal debugging. Finally, we show that iterative and agentic debugging strategies do not substantially improve precision or recall, highlighting the need to rethink post-training pipelines for coding models.

We introduce "pointer-guided segment ordering" (SO), a novel pre-training technique aimed at enhancing the contextual understanding of paragraph-level text representations in large language models. Our methodology leverages a self-attention-driven pointer network to restore the original sequence of shuffled text segments, addressing the challenge of capturing the structural coherence and contextual dependencies within documents. This pre-training approach is complemented by a fine-tuning methodology that incorporates dynamic sampling, augmenting the diversity of training instances and improving sample efficiency for various downstream applications. We evaluate our method on a diverse set of datasets, demonstrating its efficacy in tasks requiring sequential text classification across scientific literature and financial reporting domains. Our experiments show that pointer-guided pre-training significantly enhances the model's ability to understand complex document structures, leading to state-of-the-art performance in downstream classification tasks.

Recent progress in LLM reasoning has increasingly shifted from single-pass generation to explicit search over intermediate reasoning states. Tree-of-Thoughts (ToT) organizes inference to tree-structured search with branching and backtracking, but it substantially amplifies the Key--Value (KV) cache: retaining KV states for a frontier of partial trajectories quickly becomes a memory bottleneck that limits throughput and constrains search depth and width under fixed hardware budgets. We address this challenge by observing that KV reuse in ToT-style inference is governed by search dynamics: near-term decoding depends primarily on the active branch and its ancestors, whereas inactive subtrees have low short-term reuse probability yet must remain recoverable for backtracking. Motivated by this, we propose ArborKV, a structure-aware eviction framework that couples a lightweight value estimator with a tree-aware allocation policy, and performs purely token-extractive eviction with lazy rehydration to support revisits. Experiments on ToT-style reasoning benchmarks show that ArborKV achieves up to ~4x peak KV-memory reduction while preserving near-full-retention accuracy, enabling larger search configurations under fixed device budgets that would otherwise run out of memory.

Large Language Models (LLMs) have the potential to automate reward engineering by leveraging their broad domain knowledge across various tasks. However, they often need many iterations of trial-and-error to generate effective reward functions. This process is costly because evaluating every sampled reward function requires completing the full policy optimization process for each function. In this paper, we introduce an LLM-driven reward generation framework that is able to produce state-of-the-art policies on the challenging Bi-DexHands benchmark with 20x fewer reward function samples than the prior state-of-the-art work. Our key insight is that we reduce the problem of generating task-specific rewards to the problem of coarsely estimating task progress. Our two-step solution leverages the task domain knowledge and the code synthesis abilities of LLMs to author progress functions that estimate task progress from a given state. Then, we use this notion of progress to discretize states, and generate count-based intrinsic rewards using the low-dimensional state space. We show that the combination of LLM-generated progress functions and count-based intrinsic rewards is essential for our performance gains, while alternatives such as generic hash-based counts or using progress directly as a reward function fall short.

High throughput serving of large language models (LLMs) requires batching sufficiently many requests at a time. However, existing systems struggle because the key-value cache (KV cache) memory for each request is huge and grows and shrinks dynamically. When managed inefficiently, this memory can be significantly wasted by fragmentation and redundant duplication, limiting the batch size. To address this problem, we propose PagedAttention, an attention algorithm inspired by the classical virtual memory and paging techniques in operating systems. On top of it, we build vLLM, an LLM serving system that achieves (1) near-zero waste in KV cache memory and (2) flexible sharing of KV cache within and across requests to further reduce memory usage. Our evaluations show that vLLM improves the throughput of popular LLMs by 2-4times with the same level of latency compared to the state-of-the-art systems, such as FasterTransformer and Orca. The improvement is more pronounced with longer sequences, larger models, and more complex decoding algorithms. vLLM's source code is publicly available at https://github.com/vllm-project/vllm

This paper presents a novel framework for automated code generation and debugging, designed to improve accuracy, efficiency, and scalability in software development. The proposed system integrates three core components LangGraph, GLM4 Flash, and ChromaDB within a four step iterative workflow to deliver robust performance and seamless functionality. LangGraph serves as a graph-based library for orchestrating tasks, providing precise control and execution while maintaining a unified state object for dynamic updates and consistency. It supports multi-agent, hierarchical, and sequential processes, making it highly adaptable to complex software engineering workflows. GLM4 Flash, a large language model, leverages its advanced capabilities in natural language understanding, contextual reasoning, and multilingual support to generate accurate code snippets based on user prompts. ChromaDB acts as a vector database for semantic search and contextual memory storage, enabling the identification of patterns and the generation of context-aware bug fixes based on historical data. The system operates through a structured four-step process: (1) Code Generation, which translates natural language descriptions into executable code; (2) Code Execution, which validates the code by identifying runtime errors and inconsistencies; (3) Code Repair, which iteratively refines buggy code using ChromaDB's memory capabilities and LangGraph's state tracking; and (4) Code Update, which ensures the code meets functional and performance requirements through iterative modifications.

Languages with rich static semantics, such as Rust, provide stronger guarantees for AI-generated code, but their strictness makes generation more difficult. Off-the-shelf compilers can provide useful feedback post-generation, but does not guide intermediate generation steps, such as those during autoregressive LLM decoding. Constrained decoding intervenes earlier by rejecting invalid tokens during sampling, but requires white-box model access and costly reimplementation for semantic constraints.We introduce generative compilation, the first approach to obtaining compiler feedback on partial programs during generation. The core technical device is a sealor: a lightweight, mostly syntax-guided transformation that converts partial programs into complete ones that standard compilers can diagnose. It is designed such that possible-to-complete partial programs are never rejected, while preserving enough code context to catch genuine dead ends early. We construct such a sealor on a core Rust-like calculus and prove that it satisfies these properties, all mechanized in Lean. We extend it to the first partial-program checker for real Rust. We evaluate our method on challenging repository-level Rust coding tasks, across both frontier black-box and open-weight models. We show that generative compilation reduces non-compiling outputs and improves functional correctness, relative to standard post-generation feedback. It does so by detecting a broad range of errors close to their source and early during generation, thereby reducing errors cascades and enabling focused diagnostics. More broadly, generative compilation is a step toward making compilers a first-class citizen of AI-assisted programming active during generation, rather than a separate post-generation check.

Modern GPUs feature specialized hardware units that enable high-performance, asynchronous dataflow execution. However, the conventional SIMT programming model is fundamentally misaligned with this task-parallel hardware, creating a significant programmability gap. While hardware-level warp specialization is the key to unlocking peak performance, it forces developers to manually orchestrate complex, low-level communication and software pipelines--a process that is labor-intensive, error-prone, and unsustainable. To address this challenge, we present Tawa, an automated compiler that systematically generates high-performance, warp-specialized code from a high-level, tile-based program. Central to our approach is a novel IR abstraction, asynchronous references (aref), which expresses warp-level communication without exposing low-level hardware details. Using this abstraction, Tawa automatically partitions programs into producer-consumer roles and manages the intricate dataflow pipeline, relieving developers of invasive kernel rewriting. Evaluation on NVIDIA H100 GPUs across representative LLM kernels shows that Tawa delivers high hardware utilization, achieving up to 1.1times speedup over highly optimized cuBLAS GEMM kernels. For attention workloads, Tawa attains 1.2times speedup over Triton and matches the performance of the hand-optimized CUTLASS C++ FlashAttention-3 kernel with far less programming effort.

Global placement is a critical step with high computational complexity in VLSI physical design. Modern analytical placers formulate the placement problem as a nonlinear optimization, where initialization strongly affects both convergence behavior and final placement quality. However, existing initialization methods exhibit a trade-off: area-aware initializers account for cell areas but are computationally expensive and can dominate total runtime, while fast point-based initializers ignore cell area, leading to a modeling gap that impairs convergence and solution quality. We propose a lightweight co-optimization framework that bridges this initialization gap through two strategies. First, an area-hint refinement initializer incorporates heuristic cell area information into a signed graph signal by augmenting the netlist graph with virtual nodes and negative-weight edges, yielding an area-aware and spectrally smooth placement initialization. Second, a macro-schedule placement procedure progressively restores area constraints, enabling a smooth transition from the refined initializer to the full area-aware objective and producing high-quality placement results. We evaluate the framework on macro-heavy ISPD2005 academic benchmarks and two real-world industrial designs across two technology nodes (12 cases in total). Experimental results show that our method consistently improves half-perimeter wirelength (HPWL) over point-based initializers in 11 out of 12 cases, achieving up to 2.2% HPWL reduction, while running approximately 100 times faster than the state-of-the-art area-aware initializer.

The deployment of Large Language Models (LLMs) on edge devices is fundamentally constrained by the "Memory Wall" the bottleneck where data movement latency outstrips arithmetic throughput. Standard inference runtimes often incur significant overhead through high-level abstractions, dynamic dispatch, and unaligned memory access patterns. In this work, we present a novel "Virtual Tensor Core" architecture implemented in software, optimized specifically for ARM64 microarchitectures (Apple Silicon). By bypassing standard library containers in favor of direct memory mapping (mmap) and implementing hand-tuned NEON SIMD kernels, we achieve a form of "Software-Defined Direct Memory Access (DMA)." Our proposed Tensor Virtualization Layout (TVL) guarantees 100% cache line utilization for weight matrices, while our zero-copy loader eliminates initialization latency. Experimental results on a 110M parameter model demonstrate a stable throughput of >60 tokens/second on M2 hardware. While proprietary hardware accelerators (e.g., Apple AMX) can achieve higher peak throughput, our architecture provides a fully open, portable, and deterministic reference implementation for studying the memory bottleneck on general-purpose ARM silicon, meeting the 200ms psycholinguistic latency threshold without opaque dependencies.

The transition from x86 to ARM architecture is becoming increasingly common across various domains, primarily driven by ARM's energy efficiency and improved performance across traditional sectors. However, this ISA shift poses significant challenges, mainly due to the extensive legacy ecosystem of x86 software and lack of portability across proprietary ecosystems and software stacks. This paper introduces CRT, a lightweight LLM-based transpiler that automatically converts x86 assembly to ARM assembly. Our approach bridges the fundamental architectural gap between x86's CISC-based and ARM's RISC-based computing paradigms while preserving program semantics and optimizing performance. We evaluate CRT on diverse real-world applications, achieving 79.25% translation accuracy from x86 to ARMv5 on our comprehensive test suite, and an 88.68% accuracy from x86 to RISC-V. In practical deployments on Apple M2 hardware (ARMv8), our transpiled code achieves 1.73times speedup compared to Apple's Rosetta 2 virtualization engine, while delivering 2.41times memory efficiency and 1.47times better energy consumption. Through testing and analysis, we show that CRT successfully navigates the CISC/RISC divide and generates correctly executable RISC code despite machine ``language'' barriers. We release our code, models, training datasets, and benchmarks at: https://ahmedheakl.github.io/asm2asm/.

The quadratic complexity of the attention mechanism and the substantial memory footprint of the Key-Value (KV) cache present severe computational and memory challenges for Large Language Models (LLMs) processing long contexts. Existing retrieval-based methods often compromise semantic integrity through fixed-size chunking and suffer from inefficient linear scanning. In this paper, we propose LycheeCluster, a novel method for efficient KV cache management. LycheeCluster preserves local semantic coherence via boundary-aware chunking and constructs a recursive hierarchical index rooted in the triangle inequality. This design transforms cache retrieval from a linear scan into a theoretically bounded, logarithmic-time pruning process, while a lazy update strategy supports efficient streaming generation. Experiments demonstrate that LycheeCluster achieves up to a 3.6x end-to-end inference speedup with negligible degradation in model performance, outperforming state-of-the-art KV cache management methods (e.g., Quest, ClusterKV). We will release our code and kernels after publication.

Recent advances in 1-bit Large Language Models (LLMs), such as BitNet and BitNet b1.58, present a promising approach to enhancing the efficiency of LLMs in terms of speed and energy consumption. These developments also enable local LLM deployment across a broad range of devices. In this work, we introduce bitnet.cpp, a tailored software stack designed to unlock the full potential of 1-bit LLMs. Specifically, we develop a set of kernels to support fast and lossless inference of ternary BitNet b1.58 LLMs on CPUs. Extensive experiments demonstrate that bitnet.cpp achieves significant speedups, ranging from 2.37x to 6.17x on x86 CPUs and from 1.37x to 5.07x on ARM CPUs, across various model sizes. The code is available at https://github.com/microsoft/BitNet.

Many-Shot In-Context Learning (ICL) has emerged as a promising paradigm, leveraging extensive examples to unlock the reasoning potential of Large Language Models (LLMs). However, existing methods typically rely on a predetermined, fixed number of shots. This static approach often fails to adapt to the varying difficulty of different queries, leading to either insufficient context or interference from noise. Furthermore, the prohibitive computational and memory costs of long contexts severely limit Many-Shot's feasibility. To address the above limitations, we propose AdapShot, which dynamically optimizes shot counts and leverages KV cache reuse for efficient inference. Specifically, we design a probe-based evaluation mechanism that utilizes output entropy to determine the optimal number of shots. To bypass the redundant prefilling computation during both the probing and inference phases, we incorporate a semantics-aware KV cache reuse strategy. Within this reuse strategy, to address positional encoding incompatibilities, we introduce a decoupling and re-encoding method that enables the flexible reordering of cached key-value pairs. Extensive experiments demonstrate that AdapShot achieves an average performance gain of around 10% and a 4.64x speedup compared to state-of-the-art DBSA.

Mixture-of-Experts (MoE) architectures in large language models (LLMs) deliver exceptional performance and reduced inference costs compared to dense LLMs. However, their large parameter counts result in prohibitive memory requirements, limiting practical deployment. While existing pruning methods primarily focus on expert-level pruning, this coarse granularity often leads to substantial accuracy degradation. In this work, we introduce HEAPr, a novel pruning algorithm that decomposes experts into smaller, indivisible atomic experts, enabling more precise and flexible atomic expert pruning. To measure the importance of each atomic expert, we leverage second-order information based on principles similar to Optimal Brain Surgeon (OBS) theory. To address the computational and storage challenges posed by second-order information, HEAPr exploits the inherent properties of atomic experts to transform the second-order information from expert parameters into that of atomic expert parameters, and further simplifies it to the second-order information of atomic expert outputs. This approach reduces the space complexity from O(d^4), where d is the model's dimensionality, to O(d^2). HEAPr requires only two forward passes and one backward pass on a small calibration set to compute the importance of atomic experts. Extensive experiments on MoE models, including DeepSeek MoE and Qwen MoE family, demonstrate that HEAPr outperforms existing expert-level pruning methods across a wide range of compression ratios and benchmarks. Specifically, HEAPr achieves nearly lossless compression at compression ratios of 20% ~ 25% in most models, while also reducing FLOPs nearly by 20%. The code can be found at https://github.com/LLIKKE/HEAPr{https://github.com/LLIKKE/HEAPr}.

Large language models (LLMs), as epitomized by models like ChatGPT, have revolutionized the field of natural language processing (NLP). Along with this trend, code-based large language models such as StarCoder, WizardCoder, and CodeLlama have emerged, trained extensively on vast repositories of code data. Yet, inherent in their design, these models primarily focus on generative tasks like code generation, code completion, and comment generation, and general support for multiple programming languages. While the generic abilities of code LLMs are useful for many programmers, the area of high-performance computing (HPC) has a narrower set of requirements that make a smaller and more domain-specific LM a smarter choice. This paper introduces OMPGPT, a novel model meticulously designed to harness the inherent strengths of language models for OpenMP pragma generation. Furthermore, we adopt and adapt prompt engineering techniques from the NLP domain to create chain-of-OMP, an innovative strategy designed to enhance OMPGPT's effectiveness. Our extensive evaluations demonstrate that OMPGPT outperforms existing large language models specialized in OpenMP tasks and maintains a notably smaller size, aligning it more closely with the typical hardware constraints of HPC environments. We consider our contribution as a pivotal bridge, connecting the advantage of language models with the specific demands of HPC tasks. The success of OMPGPT lays a solid foundation, suggesting its potential applicability and adaptability to a wider range of HPC tasks, thereby opening new avenues in the field of computational efficiency and effectiveness.

Fault-tolerant quantum computing is essential for realizing the substantial computational speedups that quantum computing can bring, but it requires real-time error decoding with high performance. Speculative window decoding improves performance by reducing the time spent waiting for dependencies from prior decoding windows. However, speculative decoders have only been evaluated under the regime of superconducting qubits with fast gate speeds, surface codes, and matching decoders. Since different quantum technologies can have slower gate speeds, we evaluate the performance of speculative decoding under slow gate speeds. We also examine its sensitivity to speculation accuracy, decoder latency, processor count, and workload parallelism, which can vary across different quantum error correction codes, decoders, and hardware platforms. This work presents design principles for identifying when speculative decoding yields the greatest performance improvements. It also reveals the conditions under which non-speculative decoders outperform speculative decoders.

Current LLM-based coding agents follow a serial execution paradigm: the model first generates the complete code, then invokes an interpreter to execute it. This sequential workflow leaves the executor idle during generation and the generator idle during execution, resulting in unnecessary end-to-end latency. We observe that, unlike human developers, LLMs produce code tokens sequentially without revision, making it possible to execute code as it is being generated. We formalize this parallel execution paradigm, modeling it as a three-stage pipeline of generation, detection, and execution, and derive closed-form latency bounds that characterize its speedup potential and operating regimes. We then present Eager, a concrete implementation featuring AST-based chunking, dynamic batching with gated execution, and early error interruption. We evaluate Eager across four benchmarks, seven LLMs, and three execution environments. Results show that Eager reduces the non-overlapped execution latency by up to 99.9% and the end-to-end latency by up to 55% across seven LLMs and four benchmarks.

Conventional transformer inference engines are request-driven, paying an O(n) prefill cost on every query. In streaming workloads, where data arrives continuously and queries probe an ever-growing context, this cost is prohibitive. We introduce a data-driven computational model centred on stateful sessions: a persistent KV cache advanced incrementally as new data arrives, so prefill is moved off the critical path and query latency becomes O(|q|), independent of accumulated context size. Building on this, Flash Queries reclaim idle GPU cycles between data arrivals to pre-evaluate registered questions and return cached answers before the user asks, a pattern that is structurally impossible in stateless engines because they discard intermediate state between requests. A multi-tenant continuous-batching scheduler with cell-budget admission and prefix-aware grouped prefill lets dozens of stateful sessions coexist on a single GPU while preserving full quadratic self-attention. On streaming market-data benchmarks the reference implementation achieves up to 5.9x speedup over conventional inference engines (vLLM, SGLang, TensorRT-LLM, llama.cpp), holding query latency constant as accumulated context grows.

Modern large-scale LLM pretraining benefits from utilizing Pipeline Parallelism; however, synchronous implementations leave GPUs idle during pipeline bubbles, wasting computational resources. Asynchronous Pipeline Parallelism eliminates these bubbles, maximizing throughput at the cost of gradient staleness. Among asynchronous schedules, PipeDream-2BW is particularly appealing: unlike the original PipeDream schedule, it ensures a constant one-step gradient delay regardless of pipeline depth. However, its adoption remains limited due to the common belief that optimizing under staleness is fundamentally unstable. In this work, we challenge this assumption, demonstrating that degradation under one-step delay depends strongly on optimizer choice rather than being an intrinsic limitation. We provide the first comprehensive empirical analysis showing that while AdamW, the predominant optimizer at the time when PipeDream-2BW was introduced, indeed suffers from severe degradation, recent methods like Muon exhibit strong robustness under a one-step delay. We introduce an optimizer-agnostic Error Feedback-inspired correction to further mitigate delay effects. We provide supporting theoretical analysis demonstrating convergence for Muon with and without this correction. Extensive evaluation on models up to 10B parameters confirms that our strategies bridge the performance gap with synchronous training, highlighting the practical potential of asynchronous pipeline parallelism at scale.

While Mixture-of-Experts (MoE) scales capacity via conditional computation, Transformers lack a native primitive for knowledge lookup, forcing them to inefficiently simulate retrieval through computation. To address this, we introduce conditional memory as a complementary sparsity axis, instantiated via Engram, a module that modernizes classic N-gram embedding for O(1) lookup. By formulating the Sparsity Allocation problem, we uncover a U-shaped scaling law that optimizes the trade-off between neural computation (MoE) and static memory (Engram). Guided by this law, we scale Engram to 27B parameters, achieving superior performance over a strictly iso-parameter and iso-FLOPs MoE baseline. Most notably, while the memory module is expected to aid knowledge retrieval (e.g., MMLU +3.4; CMMLU +4.0), we observe even larger gains in general reasoning (e.g., BBH +5.0; ARC-Challenge +3.7) and code/math domains~(HumanEval +3.0; MATH +2.4). Mechanistic analyses reveal that Engram relieves the backbone's early layers from static reconstruction, effectively deepening the network for complex reasoning. Furthermore, by delegating local dependencies to lookups, it frees up attention capacity for global context, substantially boosting long-context retrieval (e.g., Multi-Query NIAH: 84.2 to 97.0). Finally, Engram establishes infrastructure-aware efficiency: its deterministic addressing enables runtime prefetching from host memory, incurring negligible overhead. We envision conditional memory as an indispensable modeling primitive for next-generation sparse models.

In the field of instruction-following large vision-language models (LVLMs), the efficient deployment of these models faces challenges, notably due to the high memory demands of their key-value (KV) caches. Conventional cache management strategies for LLMs focus on cache eviction, which often fails to address the specific needs of multimodal instruction-following models. Recognizing this gap, in this paper, we introduce Elastic Cache, a novel approach that benefits from applying distinct acceleration methods for instruction encoding and output generation stages. We investigate the metrics of importance in different stages and propose an importance-driven cache merging strategy to prune redundancy caches. Instead of discarding less important caches, our strategy identifies important key/value vectors as anchor points. Surrounding less important caches are then merged with these anchors, enhancing the preservation of contextual information in the KV caches while yielding an arbitrary acceleration ratio. For instruction encoding, we utilize the frequency to evaluate the importance of caches. Regarding output generation, we prioritize tokens based on their distance with an offset, by which both the initial and most recent tokens are retained. Results on a range of LVLMs demonstrate that Elastic Cache not only boosts efficiency but also notably outperforms existing pruning methods in language generation across various tasks. Code is available at https://github.com/liuzuyan/ElasticCache

Streaming video understanding (SVU) must answer queries that arrive asynchronously while visual tokens stream continuously under strict GPU-memory and query-time latency budgets. A key challenge is delayed query: decisive cues may appear briefly, yet many subsequent updates occur before the query arrives, increasing the risk that those cues are evicted or diluted under bounded memory. We propose ProtoKV, a constant-footprint SVU memory that represents far history as a fixed-capacity summary state rather than retaining token instances. ProtoKV keeps an exact near-window KV cache and aggregates older content into a semantic-spatial prototype bank with residual statistics. At query time, each prototype is exposed through a bounded pseudo-token interface that is drop-in compatible with standard attention. Under matched budgets and comparable query-time cost, ProtoKV improves accuracy by up to 12.5 points over token-retention baselines on SVU benchmarks in the long-delay regime, with gains that grow as query delay increases.

Large language models (LLMs) have achieved remarkable performance across a wide range of tasks, but their inference efficiency remains a critical bottleneck due to rapidly growing parameters. Recent advances in dynamic computation allocation address this challenge by exploiting the highly uneven contributions of different tokens and layers, enabling selective execution that significantly reduces redundant computation while preserving model accuracy. However, existing hardware platforms and accelerators are primarily optimized for uniform, static execution, limiting their ability to efficiently support such dynamic inference patterns. In this work, we propose SkipOPU, an FPGA-based overlay processor that dynamically allocates computation across tokens and layers with high flexibility through a lightweight routing mechanism. First, we decouple reduction operations from element-wise computation in nonlinear modules and perform reductions incrementally, which enables both stages to be fused with adjacent linear operations (router or matrix multiplication) for effective latency hiding. Second, motivated by asymmetric sensitivity to numerical precision between activation and weight, we design a PE array that efficiently supports float-fixed hybrid execution. A novel DSP overpacking technique is introduced to maximize hardware utilization while minimizing resource overhead. Finally, we develop a proactive on-chip KV history buffer that exploits cross-layer KV invariance of pruned tokens, eliminating irregular HBM accesses during decoding and supplementing off-chip bandwidth through high-locality on-chip reuse. Experimental results demonstrate that SkipOPU on an AMD U280 FPGA outperforms GPU and other FPGA-based accelerators by 1.23x-3.83x in bandwidth efficiency for LLMs inference with dynamic computation allocation and can reduce up to 25.4% KV storage overhead across varying sequence lengths.

Real-time execution is essential for cyber-physical systems such as robots. These systems operate in dynamic real-world environments where even small delays can undermine responsiveness and compromise performance. Asynchronous inference has recently emerged as a system-level paradigm for real-time robot manipulation, enabling the next action chunk to be predicted while the current one is being executed. While this approach achieves real-time responsiveness, naive integration often results in execution failure. Previous methods attributed this failure to inter-chunk discontinuity and developed test-time algorithms to smooth chunk boundaries. In contrast, we identify another critical yet overlooked factor: intra-chunk inconsistency, where the robot's executed action chunk partially misaligns with its current perception. To address this, we propose REMAC, which learns corrective adjustments on the pretrained policy through masked action chunking, enabling the policy to remain resilient under mismatches between intended actions and actual execution during asynchronous inference. In addition, we introduce a prefix-preserved sampling procedure to reinforce inter-chunk continuity. Overall, our method delivers more reliable policies without incurring additional latency. Extensive experiments in both simulation and real-world settings demonstrate that our method enables faster task execution, maintains robustness across varying delays, and consistently achieves higher completion rates.