Daily Papers

Despite rapid progress in quantum optimization, broad real-hardware benchmarks comparing multiple algorithmic families across diverse combinatorial problems under a common protocol remain limited. We benchmark gate-based quantum optimization on four NP-hard problems: multi-dimensional knapsack (MDKP), maximum independent set (MIS), quadratic assignment (QAP), and market-share (MSP). We study VQE, CVaR-VQE, standard, multi-angle, and warm-start QAOA, together with qubit-efficient PCE and QRAO, on IBM Heron r1/r2 processors using resilience-level-2 mitigation. To our knowledge, this includes the first real-hardware QRAO results and the first multi-problem PCE hardware benchmark. Across 247 method-instance combinations, we report transpiled circuit size, hardware outcomes, and an independent-error gate-count fidelity proxy, F_{est}. For MDKP and MIS, an empirical operating point near F_{est}approx 0.1, corresponding to about 770 two-qubit gates at the median Heron-r2 CZ error rate, marks the onset of noise-dominated execution. QAP exposes a separate bottleneck: dense one-hot encodings and an exponentially sparse feasible manifold, with feasible fraction 10!/2^{100} at n=10; no tested hardware method produces a feasible assignment. Compiled QAOA-family circuits are generally noise dominated, and a matched uniform-random control shows that most feasible low-fidelity outcomes fall within the random range, apart from one finite-sample MIS warm-start exception. A SWAP-aware, fractional-gate, Nighthawk-topology compilation counterfactual reduces two-qubit counts but leaves all circuits below F_{est}=10^{-3}. These conclusions apply to the tested implementations rather than QAOA in general. Qubit-efficient methods extend runnable instance sizes, but only within the empirical fidelity budget.

Constraint handling remains a key bottleneck in quantum combinatorial optimization. While slack-variable-based encodings are straightforward, they significantly increase qubit counts and circuit depth, challenging the scalability of quantum solvers. In this work, we investigate a suite of Lagrangian-based optimization techniques including dual ascent, bundle methods, cutting plane approaches, and augmented Lagrangian formulations for solving constrained combinatorial problems on quantum simulators and hardware. Our framework is applied to three representative NP-hard problems: the Travelling Salesman Problem (TSP), the Multi-Dimensional Knapsack Problem (MDKP), and the Maximum Independent Set (MIS). We demonstrate that MDKP and TSP, with their inequality-based or degree-constrained structures, allow for slack-free reformulations, leading to significant qubit savings without compromising performance. In contrast, MIS does not inherently benefit from slack elimination but still gains in feasibility and objective quality from principled Lagrangian updates. We benchmark these methods across classically hard instances, analyzing trade-offs in qubit usage, feasibility, and optimality gaps. Our results highlight the flexibility of Lagrangian formulations as a scalable alternative to naive QUBO penalization, even when qubit savings are not always achievable. This work provides practical insights for deploying constraint-aware quantum optimization pipelines, with applications in logistics, network design, and resource allocation.

Efficiently compiling quantum operations remains a major bottleneck in scaling quantum computing. Today's state-of-the-art methods achieve low compilation error by combining search algorithms with gradient-based parameter optimization, but they incur long runtimes and require multiple calls to quantum hardware or expensive classical simulations, making their scaling prohibitive. Recently, machine-learning models have emerged as an alternative, though they are currently restricted to discrete gate sets. Here, we introduce a multimodal denoising diffusion model that simultaneously generates a circuit's structure and its continuous parameters for compiling a target unitary. It leverages two independent diffusion processes, one for discrete gate selection and one for parameter prediction. We benchmark the model over different experiments, analyzing the method's accuracy across varying qubit counts, circuit depths, and proportions of parameterized gates. Finally, by exploiting its rapid circuit generation, we create large datasets of circuits for particular operations and use these to extract valuable heuristics that can help us discover new insights into quantum circuit synthesis.

Long short-term memory (LSTM) is a kind of recurrent neural networks (RNN) for sequence and temporal dependency data modeling and its effectiveness has been extensively established. In this work, we propose a hybrid quantum-classical model of LSTM, which we dub QLSTM. We demonstrate that the proposed model successfully learns several kinds of temporal data. In particular, we show that for certain testing cases, this quantum version of LSTM converges faster, or equivalently, reaches a better accuracy, than its classical counterpart. Due to the variational nature of our approach, the requirements on qubit counts and circuit depth are eased, and our work thus paves the way toward implementing machine learning algorithms for sequence modeling on noisy intermediate-scale quantum (NISQ) devices.

A range of quantum algorithms, especially those leveraging variational parameterization and circuit-based optimization, are being studied as alternatives for solving classically intractable combinatorial optimization problems (COPs). However, their applicability is limited by hardware constraints, including shallow circuit depth, limited qubit counts, and noise. To mitigate these issues, we propose a hybrid classical--quantum framework based on graph shrinking to reduce the number of variables and constraints in QUBO formulations of COPs, while preserving problem structure. Our approach introduces three key ideas: (i) constraint-aware shrinking that prevents merges that will likely violate problem-specific feasibility constraints, (ii) a verification-and-repair pipeline to correct infeasible solutions post-optimization, and (iii) adaptive strategies for recalculating correlations and controlling the graph shrinking process. We apply our approach to three standard benchmark problems: Multidimensional Knapsack (MDKP), Maximum Independent Set (MIS), and the Quadratic Assignment Problem (QAP). Empirical results show that our approach improves solution feasibility, reduces repair complexity, and enhances quantum optimization quality on hardware-limited instances. These findings demonstrate a scalable pathway for applying near-term quantum algorithms to classically challenging constrained optimization problems.

As quantum hardware scales toward fault tolerant operation, the demand for correct quantum error correction (QEC) circuits far outpaces manual design capacity. AI agents offer a promising path to automating this synthesis, yet no benchmark exists to measure their progress on the specialized task of generating QEC circuits. We introduce StabilizerBench, a benchmark suite of 192 stabilizer codes spanning 12 families, 4-196 qubits, and distances 2-21, organized into three tasks of increasing difficulty: state preparation circuit generation, circuit optimization under semantic constraints, and fault tolerant circuit synthesis. Although motivated by QEC, stabilizer circuits exercise core competencies required for general quantum programming, including gate decomposition, qubit routing, and semantic preserving transformations, while admitting efficient verification via the Gottesman Knill theorem, enabling the benchmark to scale to large codes without the exponential cost of full unitary comparison. We define a unified generator weighted scoring system with two tiers: a capability score measuring breadth of success and a quality score capturing circuit merit. We also introduce continuous fault tolerance and optimization metrics that grade error resilience and circuit improvements beyond binary pass or fail. Following the design of classical benchmarks such as SWE-bench, StabilizerBench specifies inputs, verification oracles, and scoring but leaves prompts and agent strategies open. We evaluate three frontier AI agents and find the benchmark discriminates across models and tasks with substantial headroom for improvement.

Concatenating quantum error correction codes scales error correction capability by driving logical error rates down double-exponentially across levels. However, the noise structure shifts under concatenation, making it hard to choose an optimal code sequence. We automate this choice by estimating the effective noise channel after each level and selecting the next code accordingly. In particular, we use learning-based methods to tailor small, non-additive encoders when the noise exhibits sufficient structure, then switch to standard codes once the noise is nearly uniform. In simulations, this level-wise adaptation achieves a target logical error rate with far fewer qubits than concatenating stabilizer codes alone--reducing qubit counts by up to two orders of magnitude for strongly structured noise. Therefore, this hybrid, learning-based strategy offers a promising tool for early fault-tolerant quantum computing.

We present a deterministic framework for preparing an arbitrary three-qubit pure state. To leverage entanglement structure in the state-preparation task, we classify three-qubit pure states into five types with respect to a 1|2 bipartition. Given a target state specified by its amplitudes, we provide concrete criteria and concurrence-based tests that determine its type. For each type, we derive an explicit circuit template composed of elementary single-qubit rotations and CNOT gates, with gate parameters determined systematically from the Schmidt decomposition. The full construction is described step by step from the target amplitudes, with no procedural ambiguity. As an application, we further group frequently encountered three-qubit pure states in quantum information into four classes and provide an explicit circuit for each class. Compared with prior approaches, our circuits are designed for practical use: they admit a direct algorithmic instantiation, use only CNOT gates between adjacent qubits, and for certain classes achieve smaller gate counts and circuit depth.

We present an experimental implementation of the multiplayer Quantum Volunteer's Dilemma on noisy intermediate-scale quantum (NISQ) hardware, executed on the ibm_kingston backend via Qiskit Runtime. The game is evaluated for N = 2 to 9 players under four transpiler optimization levels, with 20 independent repetitions per configuration and 2048 shots per circuit, including post-processing readout error correction via mthree. Target-state fidelity decays with system size but remains above 70% (corrected) through N = 9. With readout correction, the global average payoff reproduces the quantum theoretical benchmark exactly for N <= 6 and exceeds the classical Nash equilibrium across the full tested range. Optimization level 2 is selected as the reference configuration after gate count analysis reveals that levels 2 and 3 produce identical transpiled circuits, with level 2 achieving superior fidelity stability. A Hamming distance analysis of raw measurement counts shows that single-qubit errors dominate at small N, with multi-qubit contributions growing beyond N = 6. A calibration-based digital twin captures global payoff trends but exhibits a linear fidelity decay profile that diverges from the hardware behavior at large N, exposing the limits of first-order independent per-qubit noise models. These results demonstrate that aggregate quantum advantage in multiplayer games is robust to NISQ noise conditions across the full tested range, while the practical observability of state-level advantage is constrained to N <= 8 under post-processed readout correction.

Local Friendliness (LF) inequalities follow from seemingly reasonable assumptions about reality: (i) ``absoluteness of observed events'' (e.g., every observed event happens for all observers) and (ii) ``local agency'' (e.g., free choices can be made uncorrelated with other events outside their future light cone). Extended Wigner's Friend Scenario (EWFS) thought experiments show that textbook quantum mechanics violates these inequalities. Thus, experimental evidence of these violations would make these two assumptions incompatible. In [Nature Physics 16, 1199 (2020)], the authors experimentally implemented an EWFS, using a photonic qubit to play the role of each of the ``friends'' and measured violations of LF. One may question whether a photonic qubit is a physical system that counts as an ``observer'' and thereby question whether the experiment's outcome is significant. Intending to measure increasingly meaningful violations, we propose using a statistical measure called the ``branch factor'' to quantify the ``observerness'' of the system. We then encode the EWFS as a quantum circuit such that the components of the circuit that define the friend are quantum systems of increasing branch factor. We run this circuit on quantum simulators and hardware devices, observing LF violations as the system sizes scale. As errors in quantum computers reduce the significance of the violations, better quantum computers can produce better violations. Our results extend the state of the art in proof-of-concept experimental violations from branch factor 0.0 to branch factor 16.0. This is an initial result in an experimental program for measuring LF violations at increasingly meaningful branch factors using increasingly more powerful quantum processors and networks. We introduce this program as a fundamental science application for near-term and developing quantum technology.

We present quantum circuits to implement an exhaustive key search for the Advanced Encryption Standard (AES) and analyze the quantum resources required to carry out such an attack. We consider the overall circuit size, the number of qubits, and the circuit depth as measures for the cost of the presented quantum algorithms. Throughout, we focus on Clifford+T gates as the underlying fault-tolerant logical quantum gate set. In particular, for all three variants of AES (key size 128, 192, and 256 bit) that are standardized in FIPS-PUB 197, we establish precise bounds for the number of qubits and the number of elementary logical quantum gates that are needed to implement Grover's quantum algorithm to extract the key from a small number of AES plaintext-ciphertext pairs.

Binary classical information is routinely encoded in the two metastable states of a dynamical system. Since these states may exhibit macroscopic lifetimes, the encoded information inherits a strong protection against bit-flips. A recent qubit - the cat-qubit - is encoded in the manifold of metastable states of a quantum dynamical system, thereby acquiring bit-flip protection. An outstanding challenge is to gain quantum control over such a system without breaking its protection. If this challenge is met, significant shortcuts in hardware overhead are forecast for quantum computing. In this experiment, we implement a cat-qubit with bit-flip times exceeding ten seconds. This is a four order of magnitude improvement over previous cat-qubit implementations, and six orders of magnitude enhancement over the single photon lifetime that compose this dynamical qubit. This was achieved by introducing a quantum tomography protocol that does not break bit-flip protection. We prepare and image quantum superposition states, and measure phase-flip times above 490 nanoseconds. Most importantly, we control the phase of these superpositions while maintaining the bit-flip time above ten seconds. This work demonstrates quantum operations that preserve macroscopic bit-flip times, a necessary step to scale these dynamical qubits into fully protected hardware-efficient architectures.

scqubits is an open-source Python package for simulating and analyzing superconducting circuits. It provides convenient routines to obtain energy spectra of common superconducting qubits, such as the transmon, fluxonium, flux, cos(2ϕ) and the 0-π qubit. scqubits also features a number of options for visualizing the computed spectral data, including plots of energy levels as a function of external parameters, display of matrix elements of various operators as well as means to easily plot qubit wavefunctions. Many of these tools are not limited to single qubits, but extend to composite Hilbert spaces consisting of coupled superconducting qubits and harmonic (or weakly anharmonic) modes. The library provides an extensive suite of methods for estimating qubit coherence times due to a variety of commonly considered noise channels. While all functionality of scqubits can be accessed programatically, the package also implements GUI-like widgets that, with a few clicks can help users both create relevant Python objects, as well as explore their properties through various plots. When applicable, the library harnesses the computing power of multiple cores via multiprocessing. scqubits further exposes a direct interface to the Quantum Toolbox in Python (QuTiP) package, allowing the user to efficiently leverage QuTiP's proven capabilities for simulating time evolution.

We report on Quantinuum Helios, a 98-qubit trapped-ion quantum processor based on the quantum charge-coupled device (QCCD) architecture. Helios features ^{137}Ba^{+} hyperfine qubits, all-to-all connectivity enabled by a rotatable ion storage ring connecting two quantum operation regions by a junction, speed improvements from parallelized operations, and a new software stack with real-time compilation of dynamic programs. Averaged over all operational zones in the system, we achieve average infidelities of 2.5(1)times10^{-5} for single-qubit gates, 7.9(2)times10^{-4} for two-qubit gates, and 4.8(6)times10^{-4} for state preparation and measurement, none of which are fundamentally limited and likely able to be improved. These component infidelities are predictive of system-level performance in both random Clifford circuits and random circuit sampling, the latter demonstrating that Helios operates well beyond the reach of classical simulation and establishes a new frontier of fidelity and complexity for quantum computers.

The surface code family is a promising approach to implementing fault-tolerant quantum computations. Universal fault-tolerance requires error-corrected non-Clifford operations, in addition to Clifford gates, and for the former, it is imperative to experimentally demonstrate additional resources known as magic states. Another challenge is to efficiently embed surface codes into quantum hardware with connectivity constraints. This work simultaneously addresses both challenges by employing a qubit-efficient rotated heavy-hexagonal surface code for IBM quantum processors (ibm\_fez) and implementing the magic state injection protocol. Our work reports error thresholds for both logical bit- and phase-flip errors, of approx0.37% and approx0.31%, respectively, which are higher than the threshold values previously reported with traditional embedding. The post-selection-based preparation of logical magic states |H_Lrangle and |T_Lrangle achieve fidelities of 0.8806pm0.0002 and 0.8665pm0.0003, respectively, which are both above the magic state distillation threshold. Additionally, we report the minimum fidelity among injected arbitrary single logical qubit states as 0.8356pm0.0003. Our work demonstrates the potential for realising non-Clifford logical gates by producing high-fidelity logical magic states on IBM quantum devices.

This article provides an introduction to surface code quantum computing. We first estimate the size and speed of a surface code quantum computer. We then introduce the concept of the stabilizer, using two qubits, and extend this concept to stabilizers acting on a two-dimensional array of physical qubits, on which we implement the surface code. We next describe how logical qubits are formed in the surface code array and give numerical estimates of their fault-tolerance. We outline how logical qubits are physically moved on the array, how qubit braid transformations are constructed, and how a braid between two logical qubits is equivalent to a controlled-NOT. We then describe the single-qubit Hadamard, S and T operators, completing the set of required gates for a universal quantum computer. We conclude by briefly discussing physical implementations of the surface code. We include a number of appendices in which we provide supplementary information to the main text.

We propose and experimentally demonstrate sequential quantum computing (SQC), a paradigm that utilizes multiple homogeneous or heterogeneous quantum processors in hybrid classical-quantum workflows. In this manner, we are able to overcome the limitations of each type of quantum computer by combining their complementary strengths. Current quantum devices, including analog quantum annealers and digital quantum processors, offer distinct advantages, yet face significant practical constraints when individually used. SQC addresses this by efficient inter-processor transfer of information through bias fields. Consequently, measurement outcomes from one quantum processor are encoded in the initial-state preparation of the subsequent quantum computer. We experimentally validate SQC by solving a combinatorial optimization problem with interactions up to three-body terms. A D-Wave quantum annealer utilizing 678 qubits approximately solves the problem, and an IBM's 156-qubit digital quantum processor subsequently refines the obtained solutions. This is possible via the digital introduction of non-stoquastic counterdiabatic terms unavailable to the analog quantum annealer. The experiment shows a substantial reduction in computational resources and improvement in the quality of the solution compared to the standalone operations of the individual quantum processors. These results highlight SQC as a powerful and versatile approach for addressing complex combinatorial optimization problems, with potential applications in quantum simulation of many-body systems, quantum chemistry, among others.

We introduce a quantum neural network, QNN, that can represent labeled data, classical or quantum, and be trained by supervised learning. The quantum circuit consists of a sequence of parameter dependent unitary transformations which acts on an input quantum state. For binary classification a single Pauli operator is measured on a designated readout qubit. The measured output is the quantum neural network's predictor of the binary label of the input state. First we look at classifying classical data sets which consist of n-bit strings with binary labels. The input quantum state is an n-bit computational basis state corresponding to a sample string. We show how to design a circuit made from two qubit unitaries that can correctly represent the label of any Boolean function of n bits. For certain label functions the circuit is exponentially long. We introduce parameter dependent unitaries that can be adapted by supervised learning of labeled data. We study an example of real world data consisting of downsampled images of handwritten digits each of which has been labeled as one of two distinct digits. We show through classical simulation that parameters can be found that allow the QNN to learn to correctly distinguish the two data sets. We then discuss presenting the data as quantum superpositions of computational basis states corresponding to different label values. Here we show through simulation that learning is possible. We consider using our QNN to learn the label of a general quantum state. By example we show that this can be done. Our work is exploratory and relies on the classical simulation of small quantum systems. The QNN proposed here was designed with near-term quantum processors in mind. Therefore it will be possible to run this QNN on a near term gate model quantum computer where its power can be explored beyond what can be explored with simulation.

Classical self-supervised networks suffer from convergence problems and reduced segmentation accuracy due to forceful termination. Qubits or bi-level quantum bits often describe quantum neural network models. In this article, a novel self-supervised shallow learning network model exploiting the sophisticated three-level qutrit-inspired quantum information system referred to as Quantum Fully Self-Supervised Neural Network (QFS-Net) is presented for automated segmentation of brain MR images. The QFS-Net model comprises a trinity of a layered structure of qutrits inter-connected through parametric Hadamard gates using an 8-connected second-order neighborhood-based topology. The non-linear transformation of the qutrit states allows the underlying quantum neural network model to encode the quantum states, thereby enabling a faster self-organized counter-propagation of these states between the layers without supervision. The suggested QFS-Net model is tailored and extensively validated on Cancer Imaging Archive (TCIA) data set collected from Nature repository and also compared with state of the art supervised (U-Net and URes-Net architectures) and the self-supervised QIS-Net model. Results shed promising segmented outcome in detecting tumors in terms of dice similarity and accuracy with minimum human intervention and computational resources.

Qiskit is an open-source quantum computing framework that allows users to design, simulate, and run quantum circuits on real quantum hardware. We explore post-training techniques for LLMs to assist in writing Qiskit code. We introduce quantum verification as an effective method for ensuring code quality and executability on quantum hardware. To support this, we developed a synthetic data pipeline that generates quantum problem-unit test pairs and used it to create preference data for aligning LLMs with DPO. Additionally, we trained models using GRPO, leveraging quantum-verifiable rewards provided by the quantum hardware. Our best-performing model, combining DPO and GRPO, surpasses the strongest open-source baselines on the challenging Qiskit-HumanEval-hard benchmark.

Quantum Computing is a new and exciting field at the intersection of mathematics, computer science and physics. It concerns a utilization of quantum mechanics to improve the efficiency of computation. Here we present a gentle introduction to some of the ideas in quantum computing. The paper begins by motivating the central ideas of quantum mechanics and quantum computation with simple toy models. From there we move on to a formal presentation of the small fraction of (finite dimensional) quantum mechanics that we will need for basic quantum computation. Central notions of quantum architecture (qubits and quantum gates) are described. The paper ends with a presentation of one of the simplest quantum algorithms: Deutsch's algorithm. Our presentation demands neither advanced mathematics nor advanced physics.

Recently, Hastings & Haah introduced a quantum memory defined on the honeycomb lattice. Remarkably, this honeycomb code assembles weight-six parity checks using only two-local measurements. The sparse connectivity and two-local measurements are desirable features for certain hardware, while the weight-six parity checks enable robust performance in the circuit model. In this work, we quantify the robustness of logical qubits preserved by the honeycomb code using a correlated minimum-weight perfect-matching decoder. Using Monte Carlo sampling, we estimate the honeycomb code's threshold in different error models, and project how efficiently it can reach the "teraquop regime" where trillions of quantum logical operations can be executed reliably. We perform the same estimates for the rotated surface code, and find a threshold of 0.2%-0.3% for the honeycomb code compared to a threshold of 0.5%-0.7% for the surface code in a controlled-not circuit model. In a circuit model with native two-body measurements, the honeycomb code achieves a threshold of 1.5% < p <2.0%, where p is the collective error rate of the two-body measurement gate - including both measurement and correlated data depolarization error processes. With such gates at a physical error rate of 10^{-3}, we project that the honeycomb code can reach the teraquop regime with only 600 physical qubits.

Unitary t-designs are some of the most versatile tools in quantum information theory. Their applications range from randomized benchmarking and shadow tomography, to more fundamental ones such as emulating quantum chaos and establishing exponential separations between classical and quantum query complexity. While unitary designs originating from a group structure, such as the Clifford group, have proven to be incredibly useful for qubit systems, unfortunately, this is no longer true for qudits. In fact, the classification of finite-group representations rules out the existence of unitary 2-designs for arbitrary qudit dimensions. This severely limits the applicability of standard quantum information primitives when it comes to qudit systems. We overcome these limitations with a three-fold contribution. First, we introduce a general technique to construct families of weighted state t-designs in arbitrary qudit dimensions. These weighted state-designs generalize classical shadow tomography protocol from qubits to qudits. Second, we introduce a Clifford character RB that allows us to benchmark the qudit Clifford group in any dimension, including non-prime-power dimensions. And third, we establish bounds on the quantum circuit complexity of generating approximate unitary-designs from native gates in existing quantum hardware such as high-spin and cavity-QED qudits. Our work further highlights the analogy between spin and optical coherent states by proving that spin-GKP codewords form a state 2-design while spin coherent states do not; in direct analogy with the optical case. This work is structured as a pedagogical and self-contained introduction to unitary designs and their applications to qudit systems.

Accurate determination of qubit parameters is critical for the successful implementation of quantum information and computation applications. In solid state systems, the parameters of individual qubits vary across the entire system, requiring time consuming measurements and manual fitting processes for characterization. Recent developed superconducting qubits, such as fluxonium or 0-pi qubits, offer improved fidelity operations but exhibit a more complex physical and spectral structure, complicating parameter extraction. In this work, we propose a machine learning (ML)based methodology for the automatic and accurate characterization of fluxonium qubit parameters. Our approach utilized the energy spectrum calculated by a model Hamiltonian with various magnetic fields, as training data for the ML model. The output consists of the essential fluxonium qubit energy parameters, EJ, EC, and EL in Hamiltonian. The ML model achieves remarkable accuracy (with an average accuracy 95.6%) as an initial guess, enabling the development of an automatic fitting procedure for direct application to realistic experimental data. Moreover, we demonstrate that similar accuracy can be retrieved even when the input experimental spectrum is noisy or incomplete, highlighting the model robustness. These results suggest that our automated characterization method, based on a transfer learning approach, provides a reliable framework for future extensions to other superconducting qubits or different solid-state systems. Ultimately, we believe this methodology paves the way for the construction of large-scale quantum processors.

Tianyan Quantum Cloud Platform offers cloud services demonstrating quantum advantage capabilities with a Zuchongzhi 3.0-like superconducting quantum processor. This cloud-accessible superconducting quantum prototype, named Tianyan-287, features 105 qubits and achieves high operational fidelities, with single-qubit gates, two-qubit gates, and readout fidelity at 99.90%, 99.56%, 98.7%, respectively. For a specific benchmark task involving random circuit sampling on a 74-qubit system over 24 cycles, the platform completes one million samples in just 18.4 minutes. In contrast, state-of-the-art classical supercomputers would require approximately 16,000 years to complete the equivalent calculation. To facilitate this, the platform provides access via Cqlib, an open-source SDK designed for working with quantum systems at the level of extended quantum circuits, operators, and primitives. The cloud service aims to democratize access to high-performance quantum hardware, enabling the community to validate and explore practical quantum advantages.

As the field of quantum computing grows, novel algorithms which take advantage of quantum phenomena need to be developed. As we are currently in the NISQ (noisy intermediate scale quantum) era, quantum algorithm researchers cannot reliably test their algorithms on real quantum hardware, which is still too limited. Instead, quantum computing simulators on classical computing systems are used. In the quantum circuit model, quantum bits (qubits) are operated on by quantum gates. A quantum circuit is a sequence of such quantum gates operating on some number of qubits. A quantum gate applied to a qubit can be controlled by other qubits in the circuit. This applies the gate only to the states which satisfy the required control qubit state. We particularly target FPGAs as our main simulation platform, as these offer potential energy savings when compared to running simulations on CPUs/GPUs. In this work, we present a memory access pattern to optimise the number of iterations that need to be scheduled to execute a quantum gate such that only the iterations which access the required pairs (determined according to the control qubits imposed on the gate) are scheduled. We show that this approach results in a significant reduction in the time required to simulate a gate for each added control qubit. We also show that this approach benefits the simulation time on FPGAs more than CPUs and GPUs and allows to outperform both CPU and GPU platforms in terms of energy efficiency, which is the main factor for scalability of the simulations.

QSE is emerging as a critical discipline to make quantum computing accessible to a broader developer community; however, most quantum development environments still require developers to engage with low-level details across the software stack - including problem encoding, circuit construction, algorithm configuration, hardware selection, and result interpretation - making them difficult for classical software engineers to use. To bridge this gap, we present C2|Q>, a hardware-agnostic quantum software development framework that translates specific types of classical specifications into quantum-executable programs while preserving methodological rigor. The framework applies modular SE principles by classifying the workflow into three core modules: an encoder that classifies problems, produces Quantum-Compatible Formats, and constructs quantum circuits, a deployment module that generates circuits and recommends hardware based on fidelity, runtime, and cost, and a decoder that interprets quantum outputs into classical solutions. In evaluation, the encoder module achieved a 93.8% completion rate, the hardware recommendation module consistently selected the appropriate quantum devices for workloads scaling up to 56 qubits. End-to-end experiments on 434 Python programs and 100 JSON problem instances show that the full C2|Q> workflow executes reliably on simulators and can be deployed successfully on representative real quantum hardware, with empirical runs limited to small- and medium-sized instances consistent with current NISQ capabilities. These results indicate that C2|Q> lowers the entry barrier to quantum software development by providing a reproducible, extensible toolchain that connects classical specifications to quantum execution. The open-source implementation of C2|Q> is available at https://github.com/C2-Q/C2Q and as a Python package at https://pypi.org/project/c2q-framework/.

We study the prepare-and-measure scenario in which Alice transmits a quantum system to Bob, who then performs a quantum measurement. The quantum state of the system is unknown to Bob, and the measurement is unknown to Alice. It has recently been shown that shared randomness and two bits of classical communication are necessary and sufficient to simulate the transmission of a qubit. We show that the communication cost can be reduced to an average of 1.89 bits. We then study restricted sets of state preparations: First, for a restriction to real-valued qubit states, if the communication of a classical trit is sufficient, we show that the corresponding protocol must have a convoluted form. We then reduce the smallest qubit scenario requiring two bits of classical communication to only 6 state preparations and 5 measurements. For a qutrit, it is not known whether the communication cost is finite; we identify a scenario that requires at least 5 classical messages, already for the simulation of the real qutrit. Finally, we develop a method for restricted sets of states, that allows us to lower bound the classical communication cost based solely on the set of quantum states.

Genuine quantum-mechanical effects are readily observable in modern optomechanical systems comprising bosonic ("classical") optical resonators. Here we describe unique features and advantages of optical two-level systems, or qubits, for optomechanics. The qubit state can be coherently controlled using both phonons and resonant or detuned photons. We experimentally demonstrate this using charge-controlled InAs quantum dots (QDs) in surface-acoustic-wave resonators. Time-correlated single-photon counting measurements reveal the control of QD population dynamics using engineered optical pulses and mechanical motion. As a first example, at moderate acoustic drive strengths, we demonstrate the potential of this technique to maximize fidelity in quantum microwave-to-optical transduction. Specifically, we tailor the scheme so that mechanically assisted photon scattering is enhanced over the direct detuned photon scattering from the QD. Spectral analysis reveals distinct scattering channels related to Rayleigh scattering and luminescence in our pulsed excitation measurements which lead to time-dependent scattering spectra. Quantum-mechanical calculations show good agreement with our experimental results, together providing a comprehensive description of excitation, scattering and emission in a coupled QD-phonon optomechanical system.

This whitepaper seeks to elucidate implications that the capabilities of developing quantum architectures have on blockchain vulnerabilities and mitigation strategies. First, we provide new resource estimates for breaking the 256-bit Elliptic Curve Discrete Logarithm Problem, the core of modern blockchain cryptography. We demonstrate that Shor's algorithm for this problem can execute with either <1200 logical qubits and <90 million Toffoli gates or <1450 logical qubits and <70 million Toffoli gates. In the interest of responsible disclosure, we use a zero-knowledge proof to validate these results without disclosing attack vectors. On superconducting architectures with 1e-3 physical error rates and planar connectivity, those circuits can execute in minutes using fewer than half a million physical qubits. We introduce a critical distinction between fast-clock (such as superconducting and photonic) and slow-clock (such as neutral atom and ion trap) architectures. Our analysis reveals that the first fast-clock CRQCs would enable on-spend attacks on public mempool transactions of some cryptocurrencies. We survey major cryptocurrency vulnerabilities through this lens, identifying systemic risks associated with advanced features in some blockchains such as smart contracts, Proof-of-Stake consensus, and Data Availability Sampling, as well as the enduring concern of abandoned assets. We argue that technical solutions would benefit from accompanying public policy and discuss various frameworks of digital salvage to regulate the recovery or destruction of dormant assets while preventing adversarial seizure. We also discuss implications for other digital assets and tokenization as well as challenges and successful examples of the ongoing transition to Post-Quantum Cryptography (PQC). Finally, we urge all vulnerable cryptocurrency communities to join the ongoing migration to PQC without delay.

We implement and benchmark on IBM Quantum hardware the circuit family proposed by Violaris for estimating operational inter-branch communication witnesses, defined as correlations in classical measurement records produced by compiled Wigner's-friend-style circuits. We realize a five-qubit instance of the protocol as an inter-register message-transfer pattern within a single circuit, rather than physical signaling, and evaluate its behavior under realistic device noise and compilation constraints. The circuit encodes branch-conditioned evolution of an observer subsystem whose dynamics depend on a control qubit, followed by a controlled transfer operation that probes correlations between conditional measurement contexts. Executing on the ibm_fez backend with 20000 shots, we observe population-based visibility of 0.877, coherence witnesses of 0.840 and -0.811 along orthogonal axes, and a phase-sensitive magnitude of approximately 1.17. While the visibility metric is insensitive to some classes of dephasing, the coherence witnesses provide complementary sensitivity to off-diagonal noise. This work does not test or discriminate among interpretations of quantum mechanics. Instead, it provides a reproducible operational constraint pipeline for evaluating detectability of non-ideal channels relative to calibrated device noise.

We introduce an optical tweezer platform for assembling and individually manipulating a two-dimensional register of nuclear spin qubits. Each nuclear spin qubit is encoded in the ground ^{1}S_{0} manifold of ^{87}Sr and is individually manipulated by site-selective addressing beams. We observe that spin relaxation is negligible after 5 seconds, indicating that T_1gg5 s. Furthermore, utilizing simultaneous manipulation of subsets of qubits, we demonstrate significant phase coherence over the entire register, estimating T_2^star = left(21pm7right) s and measuring T_2^echo=left(42pm6right) s.

We review thirteen generative systems and five supporting datasets for quantum circuit and quantum code generation, identified through a structured scoping review of Hugging Face, arXiv, and provenance tracing (January-February 2026). We organize the field along two axes: artifact type (Qiskit code, OpenQASM programs, circuit graphs); crossed with training regime (supervised fine-tuning, verifier-in-the-loop RL, diffusion/graph generation, agentic optimization); and systematically apply a three-layer evaluation framework covering syntactic validity, semantic correctness, and hardware executability. The central finding is that while all reviewed systems address syntax and most address semantics to some degree, none reports end-to-end evaluation on quantum hardware (Layer 3b), leaving a significant gap between generated circuits and practical deployment. Scope note: quantum code refers throughout to quantum program artifacts (QASM, Qiskit); we do not cover generation of quantum error-correcting codes (QEC).

The encoding of qubits in semiconductor spin carriers has been recognised as a promising approach to a commercial quantum computer that can be lithographically produced and integrated at scale. However, the operation of the large number of qubits required for advantageous quantum applications will produce a thermal load exceeding the available cooling power of cryostats at millikelvin temperatures. As the scale-up accelerates, it becomes imperative to establish fault-tolerant operation above 1 kelvin, where the cooling power is orders of magnitude higher. Here, we tune up and operate spin qubits in silicon above 1 kelvin, with fidelities in the range required for fault-tolerant operation at such temperatures. We design an algorithmic initialisation protocol to prepare a pure two-qubit state even when the thermal energy is substantially above the qubit energies, and incorporate radio-frequency readout to achieve fidelities up to 99.34 per cent for both readout and initialisation. Importantly, we demonstrate a single-qubit Clifford gate fidelity of 99.85 per cent, and a two-qubit gate fidelity of 98.92 per cent. These advances overcome the fundamental limitation that the thermal energy must be well below the qubit energies for high-fidelity operation to be possible, surmounting a major obstacle in the pathway to scalable and fault-tolerant quantum computation.

Quantum Computing has been evolving in the last years. Although nowadays quantum algorithms performance has shown superior to their classical counterparts, quantum decoherence and additional auxiliary qubits needed for error tolerance routines have been huge barriers for quantum algorithms efficient use. These restrictions lead us to search for ways to minimize algorithms costs, i.e the number of quantum logical gates and the depth of the circuit. For this, quantum circuit synthesis and quantum circuit optimization techniques are explored. We studied the viability of using Projective Simulation, a reinforcement learning technique, to tackle the problem of quantum circuit synthesis for noise quantum computers with limited number of qubits. The agent had the task of creating quantum circuits up to 5 qubits to generate GHZ states in the IBM Tenerife (IBM QX4) quantum processor. Our simulations demonstrated that the agent had a good performance but its capacity for learning new circuits decreased as the number of qubits increased.

We introduce AQCtensor, a novel algorithm to produce short-depth quantum circuits from Matrix Product States (MPS). Our approach is specifically tailored to the preparation of quantum states generated from the time evolution of quantum many-body Hamiltonians. This tailored approach has two clear advantages over previous algorithms that were designed to map a generic MPS to a quantum circuit. First, we optimize all parameters of a parametric circuit at once using Approximate Quantum Compiling (AQC) - this is to be contrasted with other approaches based on locally optimizing a subset of circuit parameters and "sweeping" across the system. We introduce an optimization scheme to avoid the so-called ``orthogonality catastrophe" - i.e. the fact that the fidelity of two arbitrary quantum states decays exponentially with the number of qubits - that would otherwise render a global optimization of the circuit impractical. Second, the depth of our parametric circuit is constant in the number of qubits for a fixed simulation time and fixed error tolerance. This is to be contrasted with the linear circuit Ansatz used in generic algorithms whose depth scales linearly in the number of qubits. For simulation problems on 100 qubits, we show that AQCtensor thus achieves at least an order of magnitude reduction in the depth of the resulting optimized circuit, as compared with the best generic MPS to quantum circuit algorithms. We demonstrate our approach on simulation problems on Heisenberg-like Hamiltonians on up to 100 qubits and find optimized quantum circuits that have significantly reduced depth as compared to standard Trotterized circuits.

In image processing, the amount of data to be processed grows rapidly, in particular when imaging methods yield images of more than two dimensions or time series of images. Thus, efficient processing is a challenge, as data sizes may push even supercomputers to their limits. Quantum image processing promises to encode images with logarithmically less qubits than classical pixels in the image. In theory, this is a huge progress, but so far not many experiments have been conducted in practice, in particular on real backends. Often, the precise conversion of classical data to quantum states, the exact implementation, and the interpretation of the measurements in the classical context are challenging. We investigate these practical questions in this paper. In particular, we study the feasibility of the Flexible Representation of Quantum Images (FRQI). Furthermore, we check experimentally what is the limit in the current noisy intermediate-scale quantum era, i.e. up to which image size an image can be encoded, both on simulators and on real backends. Finally, we propose a method for simplifying the circuits needed for the FRQI. With our alteration, the number of gates needed, especially of the error-prone controlled-NOT gates, can be reduced. As a consequence, the size of manageable images increases.

Understanding Quantum Technologies 2025 is the 8th update of a free open science ebook that provides a 360 degrees overview of quantum technologies from science and technology to geopolitical and societal issues. It covers quantum physics history, quantum physics 101, gate-based quantum computing, quantum computing engineering (including quantum error corrections, quantum computing energetics and a new subsection of the effects of the Lieb-Robinson limit), quantum computing hardware (all qubit types, including quantum annealing and quantum simulation paradigms, history, science, research, implementation and vendors scientific and engineering approaches and roadmaps), quantum enabling technologies (cryogenics, control electronics, photonics, components fabs and manufacturing process, raw materials), unconventional computing (potential alternatives to quantum and classical computing), quantum computing algorithms, software development tools, resource estimate and benchmark tools, use case and case studies analysis methodologies, application use cases per market, quantum communications and cryptography (including QKD, PQC and QPU interconnect technologies), quantum sensing, quantum technologies around the world, quantum technologies societal impact and even quantum fake sciences. The main audience are computer science engineers, developers and IT specialists as well as quantum scientists and students who want to acquire a global view of how quantum technologies work, and particularly quantum computing. This version is an update to the 2024, 2023, 2022, and 2021 editions published respectively in October 2024, 2023, 2022 and 2021. An update log is provided at the end of the book.

Quantum Zeno Effect (QZE) has been one of the most interesting phenomena in quantum mechanics ever since its discovery in 1977 by Misra and Sudarshan [J. Math. Phys. 18, 756 (1977)]. There have been many attempts for experimental realization of the same. Here, we present the first ever simulation of QZE on IBM quantum experience platform. We simulate a two-level system for Rabi-driven oscillation and then disturb the time evolution by intermediate repetitive measurements using quantum gates to increase the survival probability of the qubit in the initial state. The circuits are designed along with the added intermediate measurements and executed on IBM quantum simulator, and the outcomes are shown to be consistent with the predictions. The increasing survival probability with the number of intermediate measurements demonstrates QZE. Furthermore, some alternative explanations for the obtained results are provided which leads to some ambiguity in giving the exact reasoning for the observed outcomes.

The advent of quantum computing poses a profound threat to traditional cryptographic systems, exposing vulnerabilities that compromise the security of digital communication channels reliant on RSA, ECC, and similar classical encryption methods. Quantum algorithms, notably Shor's algorithm, exploit the inherent computational power of quantum computers to efficiently solve mathematical problems underlying these cryptographic schemes. In response, post-quantum cryptography (PQC) emerged as a critical field aimed at developing resilient cryptographic algorithms impervious to quantum attacks. This paper delineates the vulnerabilities of classical cryptographic systems to quantum attacks, elucidates the principles of quantum computing, and introduces various PQC algorithms such as lattice-based cryptography, code-based cryptography, hash-based cryptography, and multivariate polynomial cryptography. Highlighting the importance of PQC in securing digital communication amidst quantum computing advancements, this research underscores its pivotal role in safeguarding data integrity, confidentiality, and authenticity in the face of emerging quantum threats.

Quantum technology has the potential to revolutionize how we acquire and process experimental data to learn about the physical world. An experimental setup that transduces data from a physical system to a stable quantum memory, and processes that data using a quantum computer, could have significant advantages over conventional experiments in which the physical system is measured and the outcomes are processed using a classical computer. We prove that, in various tasks, quantum machines can learn from exponentially fewer experiments than those required in conventional experiments. The exponential advantage holds in predicting properties of physical systems, performing quantum principal component analysis on noisy states, and learning approximate models of physical dynamics. In some tasks, the quantum processing needed to achieve the exponential advantage can be modest; for example, one can simultaneously learn about many noncommuting observables by processing only two copies of the system. Conducting experiments with up to 40 superconducting qubits and 1300 quantum gates, we demonstrate that a substantial quantum advantage can be realized using today's relatively noisy quantum processors. Our results highlight how quantum technology can enable powerful new strategies to learn about nature.

We describe Qiskit, a software development kit for quantum information science. We discuss the key design decisions that have shaped its development, and examine the software architecture and its core components. We demonstrate an end-to-end workflow for solving a problem in condensed matter physics on a quantum computer that serves to highlight some of Qiskit's capabilities, for example the representation and optimization of circuits at various abstraction levels, its scalability and retargetability to new gates, and the use of quantum-classical computations via dynamic circuits. Lastly, we discuss some of the ecosystem of tools and plugins that extend Qiskit for various tasks, and the future ahead.

Benchmarking models via classical simulations is one of the main ways to judge ideas in quantum machine learning before noise-free hardware is available. However, the huge impact of the experimental design on the results, the small scales within reach today, as well as narratives influenced by the commercialisation of quantum technologies make it difficult to gain robust insights. To facilitate better decision-making we develop an open-source package based on the PennyLane software framework and use it to conduct a large-scale study that systematically tests 12 popular quantum machine learning models on 6 binary classification tasks used to create 160 individual datasets. We find that overall, out-of-the-box classical machine learning models outperform the quantum classifiers. Moreover, removing entanglement from a quantum model often results in as good or better performance, suggesting that "quantumness" may not be the crucial ingredient for the small learning tasks considered here. Our benchmarks also unlock investigations beyond simplistic leaderboard comparisons, and we identify five important questions for quantum model design that follow from our results.

The many-body nature of nuclear physics problems poses significant computational challenges. These challenges become even more pronounced when studying the resonance states of nuclear systems, which are governed by the non-Hermitian Hamiltonian. Quantum computing, particularly for quantum many-body systems, offers a promising alternative, especially within the constraints of current noisy intermediate-scale quantum (NISQ) devices. This work aims to simulate nuclear resonances using quantum algorithms by developing a variational framework compatible with non-Hermitian Hamiltonians and implementing it fully on a quantum simulator. We employ the complex scaling technique to extract resonance positions classically and adapt it for quantum simulations using a two-step algorithm. First, we transform the non-Hermitian Hamiltonian into a Hermitian form by using the energy variance as a cost function within a variational framework. Second, we perform theta-trajectory calculations to determine optimal resonance positions in the complex energy plane. To address resource constraints on NISQ devices, we utilize Gray Code (GC) encoding to reduce qubit requirements. We first validate our approach using a schematic potential model that mimics a nuclear potential, successfully reproducing known resonance energies with high fidelity. We then extend the method to a more realistic alpha-alpha nuclear potential and compute the resonance energies with a basis size of 16, using only four qubits. This study demonstrates, for the first time, that the complete theta-trajectory method can be implemented on a quantum computer without relying on any classical input beyond the Hamiltonian. The results establish a scalable and efficient quantum framework for simulating resonance phenomena in nuclear systems. This work represents a significant step toward quantum simulations of open quantum systems.

Quantum simulation of many-body systems in materials science and chemistry are promising application areas for quantum computers. However, the limited scale and coherence of near-term quantum processors pose a significant obstacle to realizing this potential. Here, we theoretically outline how a single-circuit quantum electrodynamics (cQED) device, consisting of a transmon qubit coupled to a long-lived cavity mode, can be used to simulate the ground state of a highly-entangled quantum many-body spin chain. We exploit recently developed methods for implementing quantum operations to sequentially build up a matrix product state (MPS) representation of a many-body state. This approach re-uses the transmon qubit to read out the state of each spin in the chain and exploits the large state space of the cavity as a quantum memory encoding inter-site correlations and entanglement. We show, through simulation, that analog (pulse-level) control schemes can accurately prepare a known MPS representation of a quantum critical spin chain in significantly less time than digital (gate-based) methods, thereby reducing the exposure to decoherence. We then explore this analog-control approach for the variational preparation of an unknown ground state. We demonstrate that the large state space of the cavity can be used to replace multiple qubits in a qubit-only architecture, and could therefore simplify the design of quantum processors for materials simulation. We explore the practical limitations of realistic noise and decoherence and discuss avenues for scaling this approach to more complex problems that challenge classical computational methods.

This concept paper aims to provide a brief outline of quantum computers, explore existing methods of quantum image classification techniques, so focusing on remote sensing applications, and discuss the bottlenecks of performing these algorithms on currently available open source platforms. Initial results demonstrate feasibility. Next steps include expanding the size of the quantum hidden layer and increasing the variety of output image options.

Implementing quantum game theory on real hardware is challenging due to noise, decoherence, and limited qubit connectivity, yet such demonstrations are essential to validate theoretical predictions. We present one of the first full experimental realizations of the Battle of the Sexes game under the Eisert-Wilkens-Lewenstein (EWL) framework on IBM Quantum's ibm sherbrooke superconducting processor. Four quantum strategies (I, H, R(pi/4), R(pi)) were evaluated across 31 entanglement values gamma in [0, pi] using 2048 shots per configuration, enabling a direct comparison between analytical predictions and hardware execution. To mitigate noise and variability, we introduce a Guided Circuit Mapping (GCM) method that dynamically selects qubit pairs and optimizes routing based on real-time topology and calibration data. The analytical model forecasts up to 108% payoff improvement over the classical equilibrium, and despite hardware-induced deviations, experimental results with GCM preserve the expected payoff trends within 3.5%-12% relative error. These findings show that quantum advantages in strategic coordination can persist under realistic NISQ conditions, providing a pathway toward practical applications of quantum game theory in multi-agent, economic, and distributed decision-making systems.

We present a tool QSeqSim, a Qiskit-integrated symbolic backend that fills the current gap of having no Qiskit-native support for simulating while-loop quantum programs and their induced sequential quantum circuits. QSeqSim takes Qiskit QuantumCircuit objects, translates them into OpenQASM 3 code, and organises the resulting program into a combination of combinational, dynamic, and sequential circuits, thereby assigning while-loops a precise sequential circuit semantics with explicit internal and external qubits. Building on this semantics, QSeqSim adopts a Binary Decision Diagram (BDD)-based symbolic representation and integrates weighted model counting to compute measurement probabilities efficiently by exploiting sharing in structured and sparse BDDs. On top of this Boolean backbone, it introduces dedicated symbolic operators for state composition and state retention, thereby enabling efficient symbolic execution of sequential quantum circuits. Our experiments demonstrate that QSeqSim scales to substantial while-induced sequential circuits; in particular, in the quantum random walk benchmark we successfully simulate circuits with over 1000 qubits for more than 10 loop iterations. QSeqSim is available at https://github.com/Veri-Q/QSeqSim.

In this work, we provide an overview of circuits for quantum computing. We introduce gates used in quantum computation and then present resource cost measurements used to evaluate circuits made from these gates. We then illustrate how the gates shown are then combined into quantum circuits for basic arithmetic functions. Architectures for addition, subtraction, multiplication, and division are shown. We demonstrate how to calculate the resource costs of quantum circuits. We conclude this overview with by illustrating an application of the elementary quantum circuits for the image rotation operation.

Error correction allows a quantum computer to preserve states long beyond the decoherence time of its physical qubits. Key to any scheme of error correction is the decoding algorithm, which estimates the error state of qubits from the results of syndrome measurements. The leading proposal for quantum error correction, the surface code, has fast and accurate decoders, but several recently proposed quantum low-density parity check (qLDPC) codes allow more logical information to be encoded in significantly fewer physical qubits. The state-of-the-art decoder for general qLDPC codes, BP-OSD, has a cheap Belief Propagation stage, followed by linear algebra and search stages which can each be slow in practice. We introduce the Ambiguity Clustering decoder (AC) which, after the Belief Propagation stage, divides the measurement data into clusters that can be decoded independently. We benchmark AC on the recently proposed bivariate bicycle qLDPC codes and find that, with 0.3% circuit-level depolarising noise, AC is up to 27x faster than BP-OSD with matched accuracy. Our implementation of AC decodes the 144-qubit Gross code in 135us per round of syndrome extraction on an M2 CPU, already fast enough to keep up with neutral atom and trapped ion systems.

Image classification, a pivotal task in multiple industries, faces computational challenges due to the burgeoning volume of visual data. This research addresses these challenges by introducing two quantum machine learning models that leverage the principles of quantum mechanics for effective computations. Our first model, a hybrid quantum neural network with parallel quantum circuits, enables the execution of computations even in the noisy intermediate-scale quantum era, where circuits with a large number of qubits are currently infeasible. This model demonstrated a record-breaking classification accuracy of 99.21% on the full MNIST dataset, surpassing the performance of known quantum-classical models, while having eight times fewer parameters than its classical counterpart. Also, the results of testing this hybrid model on a Medical MNIST (classification accuracy over 99%), and on CIFAR-10 (classification accuracy over 82%), can serve as evidence of the generalizability of the model and highlights the efficiency of quantum layers in distinguishing common features of input data. Our second model introduces a hybrid quantum neural network with a Quanvolutional layer, reducing image resolution via a convolution process. The model matches the performance of its classical counterpart, having four times fewer trainable parameters, and outperforms a classical model with equal weight parameters. These models represent advancements in quantum machine learning research and illuminate the path towards more accurate image classification systems.

Code Large Language Models (Code LLMs) have emerged as powerful tools, revolutionizing the software development landscape by automating the coding process and reducing time and effort required to build applications. This paper focuses on training Code LLMs to specialize in the field of quantum computing. We begin by discussing the unique needs of quantum computing programming, which differ significantly from classical programming approaches or languages. A Code LLM specializing in quantum computing requires a foundational understanding of quantum computing and quantum information theory. However, the scarcity of available quantum code examples and the rapidly evolving field, which necessitates continuous dataset updates, present significant challenges. Moreover, we discuss our work on training Code LLMs to produce high-quality quantum code using the Qiskit library. This work includes an examination of the various aspects of the LLMs used for training and the specific training conditions, as well as the results obtained with our current models. To evaluate our models, we have developed a custom benchmark, similar to HumanEval, which includes a set of tests specifically designed for the field of quantum computing programming using Qiskit. Our findings indicate that our model outperforms existing state-of-the-art models in quantum computing tasks. We also provide examples of code suggestions, comparing our model to other relevant code LLMs. Finally, we introduce a discussion on the potential benefits of Code LLMs for quantum computing computational scientists, researchers, and practitioners. We also explore various features and future work that could be relevant in this context.

We introduce a technique that uses gauge fixing to significantly improve the quantum error correcting performance of subsystem codes. By changing the order in which check operators are measured, valuable additional information can be gained, and we introduce a new method for decoding which uses this information to improve performance. Applied to the subsystem toric code with three-qubit check operators, we increase the threshold under circuit-level depolarising noise from 0.67% to 0.81%. The threshold increases further under a circuit-level noise model with small finite bias, up to 2.22% for infinite bias. Furthermore, we construct families of finite-rate subsystem LDPC codes with three-qubit check operators and optimal-depth parity-check measurement schedules. To the best of our knowledge, these finite-rate subsystem codes outperform all known codes at circuit-level depolarising error rates as high as 0.2%, where they have a qubit overhead that is 4.3times lower than the most efficient version of the surface code and 5.1times lower than the subsystem toric code. Their threshold and pseudo-threshold exceeds 0.42% for circuit-level depolarising noise, increasing to 2.4% under infinite bias using gauge fixing.

Standing as one of the most significant barriers to reaching quantum advantage, state-preparation fidelities on noisy intermediate-scale quantum processors suffer from quantum-gate errors, which accumulate over time. A potential remedy is pulse-based state preparation. We numerically investigate the minimal evolution times (METs) attainable by optimizing (microwave and exchange) pulses on silicon hardware. We investigate two state preparation tasks. First, we consider the preparation of molecular ground states and find the METs for H_2, HeH^+, and LiH to be 2.4 ns, 4.4 ns, and 27.2 ns, respectively. Second, we consider transitions between arbitrary states and find the METs for transitions between arbitrary four-qubit states to be below 50 ns. For comparison, connecting arbitrary two-qubit states via one- and two-qubit gates on the same silicon processor requires approximately 200 ns. This comparison indicates that pulse-based state preparation is likely to utilize the coherence times of silicon hardware more efficiently than gate-based state preparation. Finally, we quantify the effect of silicon device parameters on the MET. We show that increasing the maximal exchange amplitude from 10 MHz to 1 GHz accelerates the METs, e.g., for H_2 from 84.3 ns to 2.4 ns. This demonstrates the importance of fast exchange. We also show that increasing the maximal amplitude of the microwave drive from 884 kHz to 56.6 MHz shortens state transitions, e.g., for two-qubit states from 1000 ns to 25 ns. Our results bound both the state-preparation times for general quantum algorithms and the execution times of variational quantum algorithms with silicon spin qubits.

Quantum error correction provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. In this work, we present two surface code memories operating below this threshold: a distance-7 code and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ = 2.14 pm 0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% pm 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit's lifetime by a factor of 2.4 pm 0.3. We maintain below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. To probe the limits of our error-correction performance, we run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3 times 10^9 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.

Quantum error mitigation (QEM) is critical in reducing the impact of noise in the pre-fault-tolerant era, and is expected to complement error correction in fault-tolerant quantum computing (FTQC). In this paper, we propose a novel QEM approach, Q-Cluster, that uses unsupervised learning (clustering) to reshape the measured bit-string distribution. Our approach starts with a simplified bit-flip noise model. It first performs clustering on noisy measurement results, i.e., bit-strings, based on the Hamming distance. The centroid of each cluster is calculated using a qubit-wise majority vote. Next, the noisy distribution is adjusted with the clustering outcomes and the bit-flip error rates using Bayesian inference. Our simulation results show that Q-Cluster can mitigate high noise rates (up to 40% per qubit) with the simple bit-flip noise model. However, real quantum computers do not fit such a simple noise model. To address the problem, we (a) apply Pauli twirling to tailor the complex noise channels to Pauli errors, and (b) employ a machine learning model, ExtraTrees regressor, to estimate an effective bit-flip error rate using a feature vector consisting of machine calibration data (gate & measurement error rates), circuit features (number of qubits, numbers of different types of gates, etc.) and the shape of the noisy distribution (entropy). Our experimental results show that our proposed Q-Cluster scheme improves the fidelity by a factor of 1.46x, on average, compared to the unmitigated output distribution, for a set of low-entropy benchmarks on five different IBM quantum machines. Our approach outperforms the state-of-art QEM approaches M3 [24], Hammer [35], and QBEEP [33] by 1.29x, 1.47x, and 2.65x, respectively.

Many hybrid quantum-classical algorithms for the application of ground state energy estimation in quantum chemistry involve estimating the expectation value of a molecular Hamiltonian with respect to a quantum state through measurements on a quantum device. To guide the selection of measurement methods designed for this observable estimation problem, we propose a benchmark called CSHOREBench (Common States and Hamiltonians for ObseRvable Estimation Benchmark) that assesses the performance of these methods against a set of common molecular Hamiltonians and common states encountered during the runtime of hybrid quantum-classical algorithms. In CSHOREBench, we account for resource utilization of a quantum computer through measurements of a prepared state, and a classical computer through computational runtime spent in proposing measurements and classical post-processing of acquired measurement outcomes. We apply CSHOREBench considering a variety of measurement methods on Hamiltonians of size up to 16 qubits. Our discussion is aided by using the framework of decision diagrams which provides an efficient data structure for various randomized methods and illustrate how to derandomize distributions on decision diagrams. In numerical simulations, we find that the methods of decision diagrams and derandomization are the most preferable. In experiments on IBM quantum devices against small molecules, we observe that decision diagrams reduces the number of measurements made by classical shadows by more than 80%, that made by locally biased classical shadows by around 57%, and consistently require fewer quantum measurements along with lower classical computational runtime than derandomization. Furthermore, CSHOREBench is empirically efficient to run when considering states of random quantum ansatz with fixed depth.

Complementary metal-oxide semiconductor (CMOS) technology has radically reshaped the world by taking humanity to the digital age. Cramming more transistors into the same physical space has enabled an exponential increase in computational performance, a strategy that has been recently hampered by the increasing complexity and cost of miniaturization. To continue achieving significant gains in computing performance, new computing paradigms, such as quantum computing, must be developed. However, finding the optimal physical system to process quantum information, and scale it up to the large number of qubits necessary to build a general-purpose quantum computer, remains a significant challenge. Recent breakthroughs in nanodevice engineering have shown that qubits can now be manufactured in a similar fashion to silicon field-effect transistors, opening an opportunity to leverage the know-how of the CMOS industry to address the scaling challenge. In this article, we focus on the analysis of the scaling prospects of quantum computing systems based on CMOS technology.

We identify five selected open problems in the theory of quantum information, which are rather simple to formulate, were well-studied in the literature, but are technically not easy. As these problems enjoy diverse mathematical connections, they offer a huge breakthrough potential. The first four concern existence of certain objects relevant for quantum information, namely a family of symmetric informationally complete generalized measurements in an infinite sequence of dimensions, mutually unbiased bases in dimension six, absolutely maximally entangled states for four subsystems with six levels each and bound entangled states with negative partial transpose. The fifth problem requires checking whether a certain state of a two-ququart system is 2-copy distillable. An award for solving each of them is announced.

Large Language Models (LLMs) are increasingly used for code generation, yet quantum code generation is still evaluated mostly within single frameworks, making it difficult to separate quantum reasoning from framework familiarity. We introduce QuanBench+, a unified benchmark spanning Qiskit, PennyLane, and Cirq, with 42 aligned tasks covering quantum algorithms, gate decomposition, and state preparation. We evaluate models with executable functional tests, report Pass@1 and Pass@5, and use KL-divergence-based acceptance for probabilistic outputs. We additionally study Pass@1 after feedback-based repair, where a model may revise code after a runtime error or wrong answer. Across frameworks, the strongest one-shot scores reach 59.5% in Qiskit, 54.8% in Cirq, and 42.9% in PennyLane; with feedback-based repair, the best scores rise to 83.3%, 76.2%, and 66.7%, respectively. These results show clear progress, but also that reliable multi-framework quantum code generation remains unsolved and still depends strongly on framework-specific knowledge.

Quantum computing promises to enhance machine learning and artificial intelligence. Different quantum algorithms have been proposed to improve a wide spectrum of machine learning tasks. Yet, recent theoretical works show that, similar to traditional classifiers based on deep classical neural networks, quantum classifiers would suffer from the vulnerability problem: adding tiny carefully-crafted perturbations to the legitimate original data samples would facilitate incorrect predictions at a notably high confidence level. This will pose serious problems for future quantum machine learning applications in safety and security-critical scenarios. Here, we report the first experimental demonstration of quantum adversarial learning with programmable superconducting qubits. We train quantum classifiers, which are built upon variational quantum circuits consisting of ten transmon qubits featuring average lifetimes of 150 mus, and average fidelities of simultaneous single- and two-qubit gates above 99.94% and 99.4% respectively, with both real-life images (e.g., medical magnetic resonance imaging scans) and quantum data. We demonstrate that these well-trained classifiers (with testing accuracy up to 99%) can be practically deceived by small adversarial perturbations, whereas an adversarial training process would significantly enhance their robustness to such perturbations. Our results reveal experimentally a crucial vulnerability aspect of quantum learning systems under adversarial scenarios and demonstrate an effective defense strategy against adversarial attacks, which provide a valuable guide for quantum artificial intelligence applications with both near-term and future quantum devices.

Quantum cryptography is arguably the fastest growing area in quantum information science. Novel theoretical protocols are designed on a regular basis, security proofs are constantly improving, and experiments are gradually moving from proof-of-principle lab demonstrations to in-field implementations and technological prototypes. In this review, we provide both a general introduction and a state of the art description of the recent advances in the field, both theoretically and experimentally. We start by reviewing protocols of quantum key distribution based on discrete variable systems. Next we consider aspects of device independence, satellite challenges, and high rate protocols based on continuous variable systems. We will then discuss the ultimate limits of point-to-point private communications and how quantum repeaters and networks may overcome these restrictions. Finally, we will discuss some aspects of quantum cryptography beyond standard quantum key distribution, including quantum data locking and quantum digital signatures.

Classical information encoded in composite quantum states can be completely hidden from the reduced subsystems and may be found only in the correlations. Can the same be true for quantum information? If quantum information is hidden from subsystems and spread over quantum correlation, we call it as masking of quantum information. We show that while this may still be true for some restricted sets of non-orthogonal quantum states, it is not possible for arbitrary quantum states. This result suggests that quantum qubit commitment -- a stronger version of the quantum bit commitment is not possible in general. Our findings may have potential applications in secret sharing and future quantum communication protocols.

Quantum algorithms, represented as quantum circuits, can be used as benchmarks for assessing the performance of quantum systems. Existing datasets, widely utilized in the field, suffer from limitations in size and versatility, leading researchers to employ randomly generated circuits. Random circuits are, however, not representative benchmarks as they lack the inherent properties of real quantum algorithms for which the quantum systems are manufactured. This shortage of `useful' quantum benchmarks poses a challenge to advancing the development and comparison of quantum compilers and hardware. This research aims to enhance the existing quantum circuit datasets by generating what we refer to as `realistic-looking' circuits by employing the Transformer machine learning architecture. For this purpose, we introduce KetGPT, a tool that generates synthetic circuits in OpenQASM language, whose structure is based on quantum circuits derived from existing quantum algorithms and follows the typical patterns of human-written algorithm-based code (e.g., order of gates and qubits). Our three-fold verification process, involving manual inspection and Qiskit framework execution, transformer-based classification, and structural analysis, demonstrates the efficacy of KetGPT in producing large amounts of additional circuits that closely align with algorithm-based structures. Beyond benchmarking, we envision KetGPT contributing substantially to AI-driven quantum compilers and systems.

The use of quantum computing for machine learning is among the most exciting prospective applications of quantum technologies. However, machine learning tasks where data is provided can be considerably different than commonly studied computational tasks. In this work, we show that some problems that are classically hard to compute can be easily predicted by classical machines learning from data. Using rigorous prediction error bounds as a foundation, we develop a methodology for assessing potential quantum advantage in learning tasks. The bounds are tight asymptotically and empirically predictive for a wide range of learning models. These constructions explain numerical results showing that with the help of data, classical machine learning models can be competitive with quantum models even if they are tailored to quantum problems. We then propose a projected quantum model that provides a simple and rigorous quantum speed-up for a learning problem in the fault-tolerant regime. For near-term implementations, we demonstrate a significant prediction advantage over some classical models on engineered data sets designed to demonstrate a maximal quantum advantage in one of the largest numerical tests for gate-based quantum machine learning to date, up to 30 qubits.

Classical supply chain risk models treat node failures as statistically independent events, systematically underestimating cascade probabilities when supplier dependencies are strongly correlated. At n=40 nodes, the full correlated failure distribution requires O(2^n) classical samples, a regime where exact simulation demands 17.6 TB of memory and over 369,000 hours of computation on a standard workstation. We present QR-SPPS (Quantum-Native Retail Shock Propagation and Policy Stress Simulator), a three-algorithm quantum pipeline implemented using the Qiskit framework with the Aer statevector_simulator backend. First, a 40-node, 4-tier retail supply network is encoded as a 40-qubit Ising Hamiltonian using OpenFermion QubitOperator, where ZZ coupling terms encode correlated cascade probabilities structurally absent from classical Monte Carlo. Second, a hardware-efficient VQE circuit finds the ground-state stress distribution with zero error, detecting entangled cascade failures in 14/40 nodes with max|ΔP|=0.637 versus classical Monte Carlo. Third, we introduce the first application of ADAPT-VQE gradient screening to counterfactual macroeconomic policy evaluation: six crisis interventions are ranked in O(1) Qiskit operator evaluations per policy, a 287x speedup over sequential VQE re-optimisation. Fourth, Density-of-States QPE (DOS-QPE) reconstructs the full eigenspectrum via 32-step Trotter evolution and introduces a novel mapping of the Boltzmann catastrophe probability P_cat(T) to VIX-equivalent market volatility temperature, enabling direct integration into regulatory Value-at-Risk frameworks. Qiskit Aer scaling benchmarks confirm exponential classical intractability at 40 qubits.

We introduce qclab++, a light-weight, fully-templated C++ package for GPU-accelerated quantum circuit simulations. The code offers a high degree of portability as it has no external dependencies and the GPU kernels are generated through OpenMP offloading. qclab++ is designed for performance and numerical stability through highly optimized gate simulation algorithms for 1-qubit, controlled 1-qubit, and 2-qubit gates. Furthermore, we also introduce qclab, a quantum circuit toolbox for Matlab with a syntax that mimics qclab++. This provides users the flexibility and ease of use of a scripting language like Matlab for studying their quantum algorithms, while offering high-performance GPU acceleration when required. As such, the qclab++ library offers a unique combination of features. We compare the CPU simulator in qclab++ with the GPU kernels generated by OpenMP and observe a speedup of over 40times. Furthermore, we also compare qclab++ to other circuit simulation packages, such as cirq-qsim and qibo, in a series of benchmarks conducted on NERSC's Perlmutter system and illustrate its competitiveness.

QDNA-ID is a trust-chain framework that links physical quantum behavior to digitally verified records. The system first executes standard quantum circuits with random shot patterns across different devices to generate entropy profiles and measurement data that reveal device-specific behavior. A Bell or CHSH test is then used to confirm that correlations originate from genuine non classical processes rather than classical simulation. The verified outcomes are converted into statistical fingerprints using entropy, divergence, and bias features to characterize each device. These features and metadata for device, session, and random seed parameters are digitally signed and time stamped to ensure integrity and traceability. Authenticated artifacts are stored in a hierarchical index for reproducible retrieval and long term auditing. A visualization and analytics interface monitors drift, policy enforcement, and device behavior logs. A machine learning engine tracks entropy drift, detects anomalies, and classifies devices based on evolving patterns. An external verification API supports independent recomputation of hashes, signatures, and CHSH evidence. QDNA-ID operates as a continuous feedback loop that maintains a persistent chain of trust for quantum computing environments.

With rapid progress across platforms for quantum systems, the problem of many-body quantum state reconstruction for noisy quantum states becomes an important challenge. Recent works found promise in recasting the problem of quantum state reconstruction to learning the probability distribution of quantum state measurement vectors using generative neural network models. Here we propose the "Attention-based Quantum Tomography" (AQT), a quantum state reconstruction using an attention mechanism-based generative network that learns the mixed state density matrix of a noisy quantum state. The AQT is based on the model proposed in "Attention is all you need" by Vishwani et al (2017) that is designed to learn long-range correlations in natural language sentences and thereby outperform previous natural language processing models. We demonstrate not only that AQT outperforms earlier neural-network-based quantum state reconstruction on identical tasks but that AQT can accurately reconstruct the density matrix associated with a noisy quantum state experimentally realized in an IBMQ quantum computer. We speculate the success of the AQT stems from its ability to model quantum entanglement across the entire quantum system much as the attention model for natural language processing captures the correlations among words in a sentence.

Transformers have gained popularity in machine learning due to their application in the field of natural language processing. They manipulate and process text efficiently, capturing long-range dependencies among data and performing the next word prediction. On the other hand, gate-based quantum computing is based on controlling the register of qubits in the quantum hardware by applying a sequence of gates, a process which can be interpreted as a low level text programming language. We develop a transformer model capable of transpiling quantum circuits from the qasm standard to other sets of gates native suited for a specific target quantum hardware, in our case the set for the trapped-ion quantum computers of IonQ. The feasibility of a translation up to five qubits is demonstrated with a percentage of correctly transpiled target circuits equal or superior to 99.98%. Regardless the depth of the register and the number of gates applied, we prove that the complexity of the transformer model scales, in the worst case scenario, with a polynomial trend by increasing the depth of the register and the length of the circuit, allowing models with a higher number of parameters to be efficiently trained on HPC infrastructures.

We introduce a semidefinite programming algorithm to find the minimal quantum Fisher information compatible with an arbitrary dataset of mean values. This certification task allows one to quantify the resource content of a quantum system for metrology applications without complete knowledge of the quantum state. We implement the algorithm to study quantum spin ensembles. We first focus on Dicke states, where our findings challenge and complement previous results in the literature. We then investigate states generated during the one-axis twisting dynamics, where in particular we find that the metrological power of the so-called multi-headed cat states can be certified using simple collective spin observables, such as fourth-order moments for small systems, and parity measurements for arbitrary system sizes.

We present a reproducible, parameter-driven software workflow for optimizing approximate mutually unbiased basis (AMUB) configurations in arbitrary dimensions d using a Lie-algebra unitary parameterization. The workflow is designed for portable execution across CPU, Apple MPS, CUDA-capable GPU, and HPC backends, using a Taylor-series matrix exponential layer as an accelerator compatibility pathway. As a dimension-six case study, we optimize unanchored configurations across 100 random seeds for basis counts n = 3, 4, 5, 6 in complex128 and complex64 arithmetic. The workflow recovers exact three-basis configurations, identifies a recurrent four-basis partial-exact hub-and-triangle structure, and finds no near-exact pairs for n = 5 or n = 6 in the reported campaigns under the primary tolerance. As a hardware-execution check, we embed the representative d = 6, n = 4 transition unitaries into three-qubit 8x8 unitaries and execute the resulting circuits on the 156-qubit Heron processor ibm-marrakesh using subspace post-selection. The measured QPU pairwise losses are dominated by a hardware and compilation noise floor of approximately 0.02-0.08, associated with compiled circuits averaging 37 native CZ gates, which obscures the distinction between classically near-exact and defective pairs. The results provide a reproducible computational framework for exploring AMUB landscapes, together with an initial assessment of the challenges involved in executing optimized dimension-six unitaries on current quantum hardware.

The realization of scalable fault-tolerant quantum computing is expected to hinge on quantum error-correcting codes. In the quest for more efficient quantum fault tolerance, a critical code parameter is the weight of measurements that extract information about errors to enable error correction: as higher measurement weights require higher implementation costs and introduce more errors, it is important in code design to optimize measurement weight. This underlies the surging interest in quantum low-density parity-check (qLDPC) codes, the study of which has primarily focused on the asymptotic (large-code-limit) properties. In this work, we introduce a versatile and computationally efficient approach to stabilizer code weight reduction based on reinforcement learning (RL), which produces new low-weight codes that substantially outperform the state of the art in practically relevant parameter regimes, extending significantly beyond previously accessible small distances. For example, our approach demonstrates savings in physical qubit overhead compared to existing results by 1 to 2 orders of magnitude for weight 6 codes and brings the overhead into a feasible range for near-future experiments. We also investigate the interplay between code parameters using our RL framework, offering new insights into the potential efficiency and power of practically viable coding strategies. Overall, our results demonstrate how RL can effectively advance the crucial yet challenging problem of quantum code discovery and thereby facilitate a faster path to the practical implementation of fault-tolerant quantum technologies.

In the rapidly evolving field of quantum computing, optimizing quantum circuits for specific tasks is crucial for enhancing performance and efficiency. More recently, quantum sensing has become a distinct and rapidly growing branch of research within the area of quantum science and technology. The field is expected to provide new opportunities, especially regarding high sensitivity and precision. Entanglement is one of the key factors in achieving high sensitivity and measurement precision [3]. This paper presents a novel approach utilizing quantum machine learning techniques to optimize entanglement distribution in quantum sensor circuits. By leveraging reinforcement learning within a quantum environment, we aim to optimize the entanglement layout to maximize Quantum Fisher Information (QFI) and entanglement entropy, which are key indicators of a quantum system's sensitivity and coherence, while minimizing circuit depth and gate counts. Our implementation, based on Qiskit, integrates noise models and error mitigation strategies to simulate realistic quantum environments. The results demonstrate significant improvements in circuit performance and sensitivity, highlighting the potential of machine learning in quantum circuit optimization by measuring high QFI and entropy in the range of 0.84-1.0 with depth and gate count reduction by 20-86%.

Near-term quantum workloads are shaped by coupled compilation and execution choices: qubit layout, routing, basis translation, gate suppression, measurement mitigation, shot budget, and artifact reproducibility. This paper analyzes QBalance, a Python workflow library for dataset-level selection among quantum compilation, noise-suppression, and error-mitigation strategies built on the Qiskit ecosystem. The contribution is formulated as a finite multi-objective strategy-selection problem over circuits, backends, and transformation policies. The manuscript derives the implemented weighted objective, non-dominated selection rule, survival-product error proxy, Bayesian linear candidate-ordering surrogate, and distributional diagnostics. It also positions the system relative to established work on Qiskit pass-manager compilation, SABRE-style routing, randomized compiling, dynamical decoupling, zero-noise extrapolation, matrix-free measurement mitigation, circuit cutting, and Thompson sampling. The analysis shows that QBalance provides a reproducible orchestration and artifact model for quantum workflow studies. It also establishes precise limitations: the current bandit mechanism orders candidates but does not reduce the number of candidate evaluations, the custom layout heuristic is greedy and only partially topology-aware, the implemented ZNE helper is parity-centered, and the cutting integration is a hook rather than a full reconstruction pipeline.

This paper envisions a quantum database (Qute) that treats quantum computation as a first-class execution option. Unlike prior simulation-based methods that either run quantum algorithms on classical machines or adapt existing databases for quantum simulation, Qute instead (i) compiles an extended form of SQL into gate-efficient quantum circuits, (ii) employs a hybrid optimizer to dynamically select between quantum and classical execution plans, (iii) introduces selective quantum indexing, and (iv) designs fidelity-preserving storage to mitigate current qubit constraints. We also present a three-stage evolution roadmap toward quantum-native database. Finally, by deploying Qute on a real quantum processor (origin_wukong), we show that it outperforms a classical baseline at scale, and we release an open-source prototype at https://github.com/weAIDB/Qute.

To realize the full potential of quantum computers, we must mitigate qubit errors by developing noise-aware algorithms, compilers, and architectures. Thus, simulating quantum programs on high-performance computing (HPC) systems with different noise models is a de facto tool researchers use. Unfortunately, noisy simulators iteratively execute a similar circuit for thousands of trials, thereby incurring significant performance overheads. To address this, we propose a noisy simulation technique called Tree-Based Quantum Circuit Simulation (TQSim). TQSim exploits the reusability of intermediate results during the noisy simulation, reducing computation. TQSim dynamically partitions a circuit into several subcircuits. It then reuses the intermediate results from these subcircuits during computation. Compared to a noisy Qulacs-based baseline simulator, TQSim achieves a speedup of up to 3.89x for noisy simulations. TQSim is designed to be efficient with multi-node setups while also maintaining tight fidelity bounds.

We provide evidence of quantum kernel advantage under noiseless simulation in binary insurance classification on MIMIC-CXR chest radiographs using quantum support vector machines (QSVM) with frozen embeddings from three medical foundation models (MedSigLIP-448, RAD-DINO, ViT-patch32). We propose a two-tier fair comparison framework in which both classifiers receive identical PCA-q features. At Tier 1 (untuned QSVM vs. untuned linear SVM, C = 1 both sides), QSVM wins minority-class F1 in all 18 tested configurations (17 at p < 0.001, 1 at p < 0.01). The classical linear kernel collapses to majority-class prediction on 90-100% of seeds at every qubit count, while QSVM maintains non-trivial recall. At q = 11 (MedSigLIP-448 plateau center), QSVM achieves mean F1 = 0.343 vs. classical F1 = 0.050 (F1 gain = +0.293, p < 0.001) without hyperparameter tuning. Under Tier 2 (untuned QSVM vs. C-tuned RBF SVM), QSVM wins all seven tested configurations (mean gain +0.068, max +0.112). Eigenspectrum analysis reveals quantum kernel effective rank reaches 69.80 at q = 11, far exceeding linear kernel rank, while classical collapse remains C-invariant. A full qubit sweep reveals architecture-dependent concentration onset across models. Code: https://github.com/sebasmos/qml-medimage

In this research, we explore the integration of quantum computing with classical machine learning for image classification tasks, specifically focusing on the MNIST dataset. We propose a hybrid quantum-classical approach that leverages the strengths of both paradigms. The process begins with preprocessing the MNIST dataset, normalizing the pixel values, and reshaping the images into vectors. An autoencoder compresses these 784-dimensional vectors into a 64-dimensional latent space, effectively reducing the data's dimensionality while preserving essential features. These compressed features are then processed using a quantum circuit implemented on a 5-qubit system. The quantum circuit applies rotation gates based on the feature values, followed by Hadamard and CNOT gates to entangle the qubits, and measurements are taken to generate quantum outcomes. These outcomes serve as input for a classical neural network designed to classify the MNIST digits. The classical neural network comprises multiple dense layers with batch normalization and dropout to enhance generalization and performance. We evaluate the performance of this hybrid model and compare it with a purely classical approach. The experimental results indicate that while the hybrid model demonstrates the feasibility of integrating quantum computing with classical techniques, the accuracy of the final model, trained on quantum outcomes, is currently lower than the classical model trained on compressed features. This research highlights the potential of quantum computing in machine learning, though further optimization and advanced quantum algorithms are necessary to achieve superior performance.

We present BenchRL-QAS, a unified benchmarking framework for reinforcement learning (RL) in quantum architecture search (QAS) across a spectrum of variational quantum algorithm tasks on 2- to 8-qubit systems. Our study systematically evaluates 9 different RL agents, including both value-based and policy-gradient methods, on quantum problems such as variational eigensolver, quantum state diagonalization, variational quantum classification (VQC), and state preparation, under both noiseless and noisy execution settings. To ensure fair comparison, we propose a weighted ranking metric that integrates accuracy, circuit depth, gate count, and training time. Results demonstrate that no single RL method dominates universally, the performance dependents on task type, qubit count, and noise conditions providing strong evidence of no free lunch principle in RL-QAS. As a byproduct we observe that a carefully chosen RL algorithm in RL-based VQC outperforms baseline VQCs. BenchRL-QAS establishes the most extensive benchmark for RL-based QAS to date, codes and experimental made publicly available for reproducibility and future advances.

In this paper, we propose the Quantum Data Center (QDC), an architecture combining Quantum Random Access Memory (QRAM) and quantum networks. We give a precise definition of QDC, and discuss its possible realizations and extensions. We discuss applications of QDC in quantum computation, quantum communication, and quantum sensing, with a primary focus on QDC for T-gate resources, QDC for multi-party private quantum communication, and QDC for distributed sensing through data compression. We show that QDC will provide efficient, private, and fast services as a future version of data centers.

Demonstrating the practical utility of Noisy Intermediate-Scale Quantum (NISQ) hardware for recurrent tasks in Computer-Aided Drug Discovery is of paramount importance. We tackle this challenge by performing three-dimensional protein pockets hydration-site prediction on a quantum computer. Formulating the water placement problem as a Quadratic Unconstrained Binary Optimization (QUBO), we use a hybrid approach coupling a classical three-dimensional reference-interaction site model (3D-RISM) to an efficient quantum optimization solver, to run various hardware experiments up to 123 qubits. Matching the precision of classical approaches, our results reproduced experimental predictions on real-life protein-ligand complexes. Furthermore, through a detailed resource estimation analysis, we show that accuracy can be systematically improved with increasing number of qubits, indicating that full quantum utility is in reach. Finally, we provide evidence that advantageous situations could be found for systems where classical optimization struggles to provide optimal solutions. The method has potential for assisting simulations of protein-ligand complexes for drug lead optimization and setup of docking calculations.

Lattice surgery with two-dimensional quantum error correcting codes is among the leading schemes for fault-tolerant quantum computation, motivated by superconducting hardware architectures. In conventional lattice surgery compilation schemes, logical circuits are compiled following a place-and-route paradigm, where logical qubits remain statically fixed in space throughout the computation. In this work, we introduce a paradigm shift by exploiting movable logical qubits via teleportation during the logical lattice surgery CNOT gate. Focusing on lattice surgery with the color code, we propose a proof-of-concept compilation scheme that leverages this capability. Numerical simulations show that the proposed approach can substantially reduce the routed circuit depth compared to standard place-and-route compilation techniques. Our results demonstrate that optimizations based on movable logical qubits are not limited to architectures with physically movable qubits, such as neutral atoms or trapped ions - they are also readily applicable to superconducting quantum hardware. An open-source implementation of our method is available on GitHub https://github.com/munich-quantum-toolkit/qecc.

We present an end-to-end and practical randomness amplification and privatisation protocol based on Bell tests. This allows the building of device-independent random number generators which output (near-)perfectly unbiased and private numbers, even if using an uncharacterised quantum device potentially built by an adversary. Our generation rates are linear in the repetition rate of the quantum device and the classical randomness post-processing has quasi-linear complexity - making it efficient on a standard personal laptop. The statistical analysis is also tailored for real-world quantum devices. Our protocol is then showcased on several different quantum computers. Although not purposely built for the task, we show that quantum computers can run faithful Bell tests by adding minimal assumptions. In this semi-device-independent manner, our protocol generates (near-)perfectly unbiased and private random numbers on today's quantum computers.

The ambition of harnessing the quantum for computation is at odds with the fundamental phenomenon of decoherence. The purpose of quantum error correction (QEC) is to counteract the natural tendency of a complex system to decohere. This cooperative process, which requires participation of multiple quantum and classical components, creates a special type of dissipation that removes the entropy caused by the errors faster than the rate at which these errors corrupt the stored quantum information. Previous experimental attempts to engineer such a process faced an excessive generation of errors that overwhelmed the error-correcting capability of the process itself. Whether it is practically possible to utilize QEC for extending quantum coherence thus remains an open question. We answer it by demonstrating a fully stabilized and error-corrected logical qubit whose quantum coherence is significantly longer than that of all the imperfect quantum components involved in the QEC process, beating the best of them with a coherence gain of G = 2.27 pm 0.07. We achieve this performance by combining innovations in several domains including the fabrication of superconducting quantum circuits and model-free reinforcement learning.

Quantum devices capable of breaking the public-key cryptosystems that Bitcoin relies on to secure its transactions are expected with reasonable probability within a decade. Quantum attacks would put at risk the entire Bitcoin network, which has an estimated value of around 500 billion USD. To prevent this threat, a proactive approach is critical. The only known way to prevent any such attack is to upgrade the currently used public-key cryptosystems, namely ECDSA, with so-called post-quantum cryptosystems which have no known vulnerabilities to quantum attacks. In this paper, we analyse the technical cost of such an upgrade. We calculate a non-tight lower bound on the cumulative downtime required for the above transition to be 1827.96 hours, or 76.16 days. We also demonstrate that the transition needs to be fully completed before the availability of ECDSA-256 breaking quantum devices, in order to ensure Bitcoin's ongoing security. The conclusion is that the Bitcoin upgrade to quantum-safe protocols needs to be started as soon as possible in order to guarantee its ongoing operations.

We report genuine-un-compiled, textbook-faithful-quantum cryptanalysis of symmetric-cipher structures executed on real IBM quantum hardware (ibm\_kingston, Heron generation). Using Simon's algorithm we recover the hidden period of the Even-Mansour cipher up to security parameter N = 10 on real hardware, beyond the largest previously reported real-hardware key recovery of N = 4, and we cleanly recover the periods of a 3-round Feistel (DES-family) construction at block sizes 6 and 8; a 21-qubit block-10 instance is verified in simulation and submitted to hardware. We further provide a breadth-first benchmark of five genuine quantum attacks spanning four symmetric-cipher design paradigms -- Bernstein-Vazirani (linear structure, single query), Grover (SPN key search, quadratic), and Simon (Even-Mansour, CBC-MAC forgery, and Feistel; exponential-to-polynomial in query complexity) -- validated to the classical-simulation ceiling of 25 qubits. We are deliberately explicit about scope: these attacks target reduced or structured constructions in the Q2 (quantum-query) model, asymptotically follow the birthday bound and therefore do not constitute quantum advantage over classical collision-finding, do not break full AES/RSA or 16-round DES, and rely on error mitigation rather than fault-tolerant error correction. Our contribution is the real-hardware demonstration at record structure sizes, the breadth of genuine algorithmic coverage across four paradigms, and an honest, reproducible benchmark with public artifacts.

Broadly applicable quantum advantage, particularly in classical data processing and machine learning, has been a fundamental open problem. In this work, we prove that a small quantum computer of polylogarithmic size can perform large-scale classification and dimension reduction on massive classical data by processing samples on the fly, whereas any classical machine achieving the same prediction performance requires exponentially larger size. Furthermore, classical machines that are exponentially larger yet below the required size need superpolynomially more samples and time. We validate these quantum advantages in real-world applications, including single-cell RNA sequencing and movie review sentiment analysis, demonstrating four to six orders of magnitude reduction in size with fewer than 60 logical qubits. These quantum advantages are enabled by quantum oracle sketching, an algorithm for accessing the classical world in quantum superposition using only random classical data samples. Combined with classical shadows, our algorithm circumvents the data loading and readout bottleneck to construct succinct classical models from massive classical data, a task provably impossible for any classical machine that is not exponentially larger than the quantum machine. These quantum advantages persist even when classical machines are granted unlimited time or if BPP=BQP, and rely only on the correctness of quantum mechanics. Together, our results establish machine learning on classical data as a broad and natural domain of quantum advantage and a fundamental test of quantum mechanics at the complexity frontier.

We present and experimentally realize a quantum algorithm for efficiently solving the following problem: given an Ntimes N matrix M, an N-dimensional vector emph{b}, and an initial vector emph{x}(0), obtain a target vector emph{x}(t) as a function of time t according to the constraint demph{x}(t)/dt=Memph{x}(t)+emph{b}. We show that our algorithm exhibits an exponential speedup over its classical counterpart in certain circumstances. In addition, we demonstrate our quantum algorithm for a 4times4 linear differential equation using a 4-qubit nuclear magnetic resonance quantum information processor. Our algorithm provides a key technique for solving many important problems which rely on the solutions to linear differential equations.

We introduce fusion-based quantum computing (FBQC) - a model of universal quantum computation in which entangling measurements, called fusions, are performed on the qubits of small constant-sized entangled resource states. We introduce a stabilizer formalism for analyzing fault tolerance and computation in these schemes. This framework naturally captures the error structure that arises in certain physical systems for quantum computing, such as photonics. FBQC can offer significant architectural simplifications, enabling hardware made up of many identical modules, requiring an extremely low depth of operations on each physical qubit and reducing classical processing requirements. We present two pedagogical examples of fault-tolerant schemes constructed in this framework and numerically evaluate their threshold under a hardware agnostic fusion error model including both erasure and Pauli error. We also study an error model of linear optical quantum computing with probabilistic fusion and photon loss. In FBQC the non-determinism of fusion is directly dealt with by the quantum error correction protocol, along with other errors. We find that tailoring the fault-tolerance framework to the physical system allows the scheme to have a higher threshold than schemes reported in literature. We present a ballistic scheme which can tolerate a 10.4% probability of suffering photon loss in each fusion.

Quantum systems of infinite dimension, such as bosonic oscillators, provide vast resources for quantum sensing. Yet, a general theory on how to manipulate such bosonic modes for sensing beyond parameter estimation is unknown. We present a general algorithmic framework, quantum signal processing interferometry (QSPI), for quantum sensing at the fundamental limits of quantum mechanics by generalizing Ramsey-type interferometry. Our QSPI sensing protocol relies on performing nonlinear polynomial transformations on the oscillator's quadrature operators by generalizing quantum signal processing (QSP) from qubits to hybrid qubit-oscillator systems. We use our QSPI sensing framework to make efficient binary decisions on a displacement channel in the single-shot limit. Theoretical analysis suggests the sensing accuracy, given a single-shot qubit measurement, scales inversely with the sensing time or circuit depth of the algorithm. We further concatenate a series of such binary decisions to perform parameter estimation in a bit-by-bit fashion. Numerical simulations are performed to support these statements. Our QSPI protocol offers a unified framework for quantum sensing using continuous-variable bosonic systems beyond parameter estimation and establishes a promising avenue toward efficient and scalable quantum control and quantum sensing schemes beyond the NISQ era.

We present a polynomial-time classical algorithm for estimating expectation values of arbitrary observables on typical quantum circuits under any incoherent local noise, including non-unital or dephasing. Although previous research demonstrated that some carefully designed quantum circuits affected by non-unital noise cannot be efficiently simulated, we show that this does not apply to average-case circuits, as these can be efficiently simulated using Pauli-path methods. Specifically, we prove that, with high probability over the circuit gates choice, Pauli propagation algorithms with tailored truncation strategies achieve an inversely polynomially small simulation error. This result holds for arbitrary circuit topologies and for any local noise, under the assumption that the distribution of each circuit layer is invariant under single-qubit random gates. Under the same minimal assumptions, we also prove that most noisy circuits can be truncated to an effective logarithmic depth for the task of {estimating} expectation values of observables, thus generalizing prior results to a significantly broader class of circuit ensembles. We further numerically validate our algorithm with simulations on a 6times6 lattice of qubits under the effects of amplitude damping and dephasing noise, as well as real-time dynamics on an 11times11 lattice of qubits affected by amplitude damping.

The emergence of quantum computing poses significant risks to the security of modern communication networks as it breaks today's public-key cryptographic algorithms. Quantum Key Distribution (QKD) offers a promising solution by harnessing the principles of quantum mechanics to establish secure keys. However, practical QKD implementations remain vulnerable to hardware imperfections and advanced attacks such as Photon Number Splitting and Trojan-Horse attacks. In this work, we investigate the potential of quantum machine learning (QML) to detect QKD attacks. In particular, we propose a Hybrid Quantum Long Short-Term Memory (QLSTM) model to improve detection performance. By combining quantum-enhanced learning with classical deep learning, the model captures temporal patterns in QKD data, improving detection accuracy. To evaluate the proposed model, we introduce a QKD dataset that simulates typical operations along with multiple attack scenarios, including Intercept-and-Resend, Photon-Number Splitting, Trojan-Horse, Detector Blinding, and Combined attacks. The dataset includes Quantum Bit Error Rate (QBER), signal and decoy loss rates, and time-based metrics. Our results demonstrate the promising performance of the quantum machine learning approach compared to classical models. The proposed Hybrid QLSTM achieved an accuracy of 94.7% after 50 training epochs. The evaluation is conducted on a semi-realistic, simulation-generated decoy-state BB84 dataset, and the reported performance should be interpreted as a proof-of-concept rather than a final assessment on field-deployed QKD systems.

Quantum programs are typically developed using quantum Software Development Kits (SDKs). The rapid advancement of quantum computing necessitates new tools to streamline this development process, and one such tool could be Generative Artificial intelligence (GenAI). In this study, we introduce and use the Qiskit HumanEval dataset, a hand-curated collection of tasks designed to benchmark the ability of Large Language Models (LLMs) to produce quantum code using Qiskit - a quantum SDK. This dataset consists of more than 100 quantum computing tasks, each accompanied by a prompt, a canonical solution, a comprehensive test case, and a difficulty scale to evaluate the correctness of the generated solutions. We systematically assess the performance of a set of LLMs against the Qiskit HumanEval dataset's tasks and focus on the models ability in producing executable quantum code. Our findings not only demonstrate the feasibility of using LLMs for generating quantum code but also establish a new benchmark for ongoing advancements in the field and encourage further exploration and development of GenAI-driven tools for quantum code generation.

Medical images are characterized by intricate and complex features, requiring interpretation by physicians with medical knowledge and experience. Classical neural networks can reduce the workload of physicians, but can only handle these complex features to a limited extent. Theoretically, quantum computing can explore a broader parameter space with fewer parameters, but it is currently limited by the constraints of quantum hardware.Considering these factors, we propose a distributed hybrid quantum convolutional neural network based on quantum circuit splitting. This model leverages the advantages of quantum computing to effectively capture the complex features of medical images, enabling efficient classification even in resource-constrained environments. Our model employs a quantum convolutional neural network (QCNN) to extract high-dimensional features from medical images, thereby enhancing the model's expressive capability.By integrating distributed techniques based on quantum circuit splitting, the 8-qubit QCNN can be reconstructed using only 5 qubits.Experimental results demonstrate that our model achieves strong performance across 3 datasets for both binary and multiclass classification tasks. Furthermore, compared to recent technologies, our model achieves superior performance with fewer parameters, and experimental results validate the effectiveness of our model.

Quantum computing is powerful because unitary operators describing the time-evolution of a quantum system have exponential size in terms of the number of qubits present in the system. We develop a new "Singular value transformation" algorithm capable of harnessing this exponential advantage, that can apply polynomial transformations to the singular values of a block of a unitary, generalizing the optimal Hamiltonian simulation results of Low and Chuang. The proposed quantum circuits have a very simple structure, often give rise to optimal algorithms and have appealing constant factors, while usually only use a constant number of ancilla qubits. We show that singular value transformation leads to novel algorithms. We give an efficient solution to a certain "non-commutative" measurement problem and propose a new method for singular value estimation. We also show how to exponentially improve the complexity of implementing fractional queries to unitaries with a gapped spectrum. Finally, as a quantum machine learning application we show how to efficiently implement principal component regression. "Singular value transformation" is conceptually simple and efficient, and leads to a unified framework of quantum algorithms incorporating a variety of quantum speed-ups. We illustrate this by showing how it generalizes a number of prominent quantum algorithms, including: optimal Hamiltonian simulation, implementing the Moore-Penrose pseudoinverse with exponential precision, fixed-point amplitude amplification, robust oblivious amplitude amplification, fast QMA amplification, fast quantum OR lemma, certain quantum walk results and several quantum machine learning algorithms. In order to exploit the strengths of the presented method it is useful to know its limitations too, therefore we also prove a lower bound on the efficiency of singular value transformation, which often gives optimal bounds.

Neutral atoms are a promising platform for quantum science, enabling advances in areas ranging from quantum simulations and computation to metrology, atomic clocks and quantum networking. While atom losses typically limit these systems to a pulsed mode, continuous operation could substantially enhance cycle rates, remove bottlenecks in metrology, and enable deep-circuit quantum evolution through quantum error correction. Here we demonstrate an experimental architecture for high-rate reloading and continuous operation of a large-scale atom-array system while realizing coherent storage and manipulation of quantum information. Our approach utilizes a series of two optical lattice conveyor belts to transport atom reservoirs into the science region, where atoms are repeatedly extracted into optical tweezers without affecting the coherence of qubits stored nearby. Using a reloading rate of 300,000 atoms in tweezers per second, we create over 30,000 initialized qubits per second, which we leverage to assemble and maintain an array of over 3,000 atoms for more than 2 hours. Furthermore, we demonstrate persistent refilling of the array with atomic qubits in either a spin-polarized or a coherent superposition state while preserving the quantum state of stored qubits. Our results pave the way for the realization of large-scale continuously operated atomic clocks, sensors, and fault-tolerant quantum computers.

Video understanding requires models to continuously track and update world state during playback. While existing benchmarks have advanced video understanding evaluation across multiple dimensions, the observation of how models maintain world state remains insufficient. We propose VCBench, a streaming counting benchmark that repositions counting as a minimal probe for diagnosing world state maintenance capability. We decompose this capability into object counting and event counting, forming 8 fine-grained subcategories. Object counting covers tracking currently visible objects and cumulative unique identities, while event counting covers detecting instantaneous actions and tracking complete activity cycles. VCBench contains 406 videos with frame-by-frame annotations of 10,071 event occurrence moments and object state change moments, generating 1,000 streaming QA pairs with 4,576 query points along timelines. By observing state maintenance trajectories through streaming multi-point queries, we design three complementary metrics to diagnose numerical precision, trajectory consistency, and temporal awareness. Evaluation on mainstream video-language models shows that current models still exhibit significant deficiencies in spatial-temporal state maintenance, particularly struggling with tasks like periodic event counting. VCBench provides a diagnostic framework for measuring and improving state maintenance in video understanding systems. Our code and data are available at https://github.com/buaaplay/VCBench.

Quantum processors may enhance machine learning by mapping high-dimensional data onto quantum systems for processing. Conventional feature maps, for encoding data onto a quantum circuit are currently impractical, as the number of entangling gates scales quadratically with the dimension of the dataset and the number of qubits. In this work, we introduce a quantum feature map designed to handle high-dimensional data with a significantly reduced number of qubits and entangling operations. Our approach preserves essential data characteristics while promoting computational efficiency, as evidenced by extensive experiments on benchmark datasets that demonstrate a marked improvement in both accuracy and resource utilization when using our feature map as a kernel for characterization, as compared to state-of-the-art quantum feature maps. Our noisy simulation results, combined with lower resource requirements, highlight our map's ability to function within the constraints of noisy intermediate-scale quantum devices. Through numerical simulations and small-scale implementation on a superconducting circuit quantum computing platform, we demonstrate that our scheme performs on par or better than a set of classical algorithms for classification. While quantum kernels are typically stymied by exponential concentration, our approach is affected with a slower rate with respect to both the number of qubits and features, which allows practical applications to remain within reach. Our findings herald a promising avenue for the practical implementation of quantum machine learning algorithms on near future quantum computing platforms.

Quantum computing offers new ways to explore the theory of computation via the laws of quantum mechanics. Due to the rising demand for quantum computing resources, there is growing interest in developing cloud-based quantum resource sharing platforms that enable researchers to test and execute their algorithms on real quantum hardware. These cloud-based systems face a fundamental challenge in efficiently allocating quantum hardware resources to fulfill the growing computational demand of modern Internet of Things (IoT) applications. So far, attempts have been made in order to make efficient resource allocation, ranging from heuristic-based solutions to machine learning. In this work, we employ quantum reinforcement learning based on parameterized quantum circuits to address the resource allocation problem to support large IoT networks. We propose a python-based toolkit called QAISim for the simulation and modeling of Quantum Artificial Intelligence (QAI) models for designing resource management policies in quantum cloud environments. We have simulated policy gradient and Deep Q-Learning algorithms for reinforcement learning. QAISim exhibits a substantial reduction in model complexity compared to its classical counterparts with fewer trainable variables.

Quantum algorithms are usually described as monolithic circuits, becoming large at modest input size. Near-term quantum architectures can only manage a small number of qubits. We develop an automated method to distribute quantum circuits over multiple agents, minimising quantum communication between them. We reduce the problem to hypergraph partitioning and then solve it with state-of-the-art optimisers. This makes our approach useful in practice, unlike previous methods. Our implementation is evaluated on five quantum circuits of practical relevance.

We demonstrate a coherent spin shuttle through a GaAs/AlGaAs quadruple-quantum-dot array. Starting with two electrons in a spin-singlet state in the first dot, we shuttle one electron over to either the second, third or fourth dot. We observe that the separated spin-singlet evolves periodically into the m=0 spin-triplet and back before it dephases due to nuclear spin noise. We attribute the time evolution to differences in the local Zeeman splitting between the respective dots. With the help of numerical simulations, we analyse and discuss the visibility of the singlet-triplet oscillations and connect it to the requirements for coherent spin shuttling in terms of the inter-dot tunnel coupling strength and rise time of the pulses. The distribution of entangled spin pairs through tunnel coupled structures may be of great utility for connecting distant qubit registers on a chip.

The intrinsic probabilistic nature of quantum systems makes error correction or mitigation indispensable for quantum computation. While current error-correcting strategies focus on correcting errors in quantum states or quantum gates, these fine-grained error-correction methods can incur significant overhead for quantum algorithms of increasing complexity. We present a first step in achieving error correction at the level of quantum algorithms by combining a unified perspective on modern quantum algorithms via quantum signal processing (QSP). An error model of under- or over-rotation of the signal processing operator parameterized by epsilon < 1 is introduced. It is shown that while Pauli Z-errors are not recoverable without additional resources, Pauli X and Y errors can be arbitrarily suppressed by coherently appending a noisy `recovery QSP.' Furthermore, it is found that a recovery QSP of length O(2^k c^{k^2} d) is sufficient to correct any length-d QSP with c unique phases to k^{th}-order in error epsilon. Allowing an additional assumption, a lower bound of Omega(cd) is shown, which is tight for k = 1, on the length of the recovery sequence. Our algorithmic-level error correction method is applied to Grover's fixed-point search algorithm as a demonstration.

Self-Attention Mechanism (SAM) excels at distilling important information from the interior of data to improve the computational efficiency of models. Nevertheless, many Quantum Machine Learning (QML) models lack the ability to distinguish the intrinsic connections of information like SAM, which limits their effectiveness on massive high-dimensional quantum data. To tackle the above issue, a Quantum Kernel Self-Attention Mechanism (QKSAM) is introduced to combine the data representation merit of Quantum Kernel Methods (QKM) with the efficient information extraction capability of SAM. Further, a Quantum Kernel Self-Attention Network (QKSAN) framework is proposed based on QKSAM, which ingeniously incorporates the Deferred Measurement Principle (DMP) and conditional measurement techniques to release half of quantum resources by mid-circuit measurement, thereby bolstering both feasibility and adaptability. Simultaneously, the Quantum Kernel Self-Attention Score (QKSAS) with an exponentially large characterization space is spawned to accommodate more information and determine the measurement conditions. Eventually, four QKSAN sub-models are deployed on PennyLane and IBM Qiskit platforms to perform binary classification on MNIST and Fashion MNIST, where the QKSAS tests and correlation assessments between noise immunity and learning ability are executed on the best-performing sub-model. The paramount experimental finding is that a potential learning advantage is revealed in partial QKSAN subclasses that acquire an impressive more than 98.05% high accuracy with very few parameters that are much less in aggregate than classical machine learning models. Predictably, QKSAN lays the foundation for future quantum computers to perform machine learning on massive amounts of data while driving advances in areas such as quantum computer vision.

Quantum networks are complex systems formed by the interaction among quantum processors through quantum channels. Analogous to classical computer networks, quantum networks allow for the distribution of quantum computation among quantum computers. In this work, we describe a quantum walk protocol to perform distributed quantum computing in a quantum network. The protocol uses a quantum walk as a quantum control signal to perform distributed quantum operations. We consider a generalization of the discrete-time coined quantum walk model that accounts for the interaction between a quantum walker system in the network graph with quantum registers inside the network nodes. The protocol logically captures distributed quantum computing, abstracting hardware implementation and the transmission of quantum information through channels. Control signal transmission is mapped to the propagation of the walker system across the network, while interactions between the control layer and the quantum registers are embedded into the application of coin operators. We demonstrate how to use the quantum walker system to perform a distributed CNOT operation, which shows the universality of the protocol for distributed quantum computing. Furthermore, we apply the protocol to the task of entanglement distribution in a quantum network.

Recent advances in quantum information science enabled the development of quantum communication network prototypes and created an opportunity to study full-stack quantum network architectures. This work develops SeQUeNCe, a comprehensive, customizable quantum network simulator. Our simulator consists of five modules: Hardware models, Entanglement Management protocols, Resource Management, Network Management, and Application. This framework is suitable for simulation of quantum network prototypes that capture the breadth of current and future hardware technologies and protocols. We implement a comprehensive suite of network protocols and demonstrate the use of SeQUeNCe by simulating a photonic quantum network with nine routers equipped with quantum memories. The simulation capabilities are illustrated in three use cases. We show the dependence of quantum network throughput on several key hardware parameters and study the impact of classical control message latency. We also investigate quantum memory usage efficiency in routers and demonstrate that redistributing memory according to anticipated load increases network capacity by 69.1% and throughput by 6.8%. We design SeQUeNCe to enable comparisons of alternative quantum network technologies, experiment planning, and validation and to aid with new protocol design. We are releasing SeQUeNCe as an open source tool and aim to generate community interest in extending it.

The field of quantum algorithms aims to find ways to speed up the solution of computational problems by using a quantum computer. A key milestone in this field will be when a universal quantum computer performs a computational task that is beyond the capability of any classical computer, an event known as quantum supremacy. This would be easier to achieve experimentally than full-scale quantum computing, but involves new theoretical challenges. Here we present the leading proposals to achieve quantum supremacy, and discuss how we can reliably compare the power of a classical computer to the power of a quantum computer.

We present an algorithmic framework for quantum-inspired classical algorithms on close-to-low-rank matrices, generalizing the series of results started by Tang's breakthrough quantum-inspired algorithm for recommendation systems [STOC'19]. Motivated by quantum linear algebra algorithms and the quantum singular value transformation (SVT) framework of Gilyén, Su, Low, and Wiebe [STOC'19], we develop classical algorithms for SVT that run in time independent of input dimension, under suitable quantum-inspired sampling assumptions. Our results give compelling evidence that in the corresponding QRAM data structure input model, quantum SVT does not yield exponential quantum speedups. Since the quantum SVT framework generalizes essentially all known techniques for quantum linear algebra, our results, combined with sampling lemmas from previous work, suffice to generalize all recent results about dequantizing quantum machine learning algorithms. In particular, our classical SVT framework recovers and often improves the dequantization results on recommendation systems, principal component analysis, supervised clustering, support vector machines, low-rank regression, and semidefinite program solving. We also give additional dequantization results on low-rank Hamiltonian simulation and discriminant analysis. Our improvements come from identifying the key feature of the quantum-inspired input model that is at the core of all prior quantum-inspired results: ell^2-norm sampling can approximate matrix products in time independent of their dimension. We reduce all our main results to this fact, making our exposition concise, self-contained, and intuitive.

This article aims to investigate how circuit-based hybrid Quantum Convolutional Neural Networks (QCNNs) can be successfully employed as image classifiers in the context of remote sensing. The hybrid QCNNs enrich the classical architecture of CNNs by introducing a quantum layer within a standard neural network. The novel QCNN proposed in this work is applied to the Land Use and Land Cover (LULC) classification, chosen as an Earth Observation (EO) use case, and tested on the EuroSAT dataset used as reference benchmark. The results of the multiclass classification prove the effectiveness of the presented approach, by demonstrating that the QCNN performances are higher than the classical counterparts. Moreover, investigation of various quantum circuits shows that the ones exploiting quantum entanglement achieve the best classification scores. This study underlines the potentialities of applying quantum computing to an EO case study and provides the theoretical and experimental background for futures investigations.

We adapt Microsoft's QuantumKatas -- a well-established quantum computing curriculum -- from Q# to Qiskit, the most widely-adopted quantum computing framework, and package it with an evaluation framework for systematic LLM assessment. The resulting benchmark comprises 350 tasks across 26 categories, spanning fundamental gates through advanced algorithms (Grover's, Simon's, Deutsch-Jozsa), error correction, key distribution, and quantum games. Each task includes a natural language prompt, canonical solution, and deterministic test verification via classical circuit simulation. By building on the QuantumKatas' proven pedagogical design rather than creating tasks from scratch, we inherit a principled difficulty progression and comprehensive concept coverage while contributing the framework adaptation, evaluation infrastructure, and empirical analysis. We evaluate 16 LLMs across 7 prompting configurations -- a total of 39,200 model runs -- to demonstrate the benchmark's utility. Three key findings emerge: (1) the benchmark effectively differentiates model capabilities, with best-configuration pass rates ranging from 32.3% to 83.1% and a 26.1 pp average gap between frontier and open-source models; (2) models perform well at implementing known algorithms (SimonsAlgorithm 82.1%, BasicGates 81.6%) but struggle with problem encoding (SolveSATWithGrover 34.4%, DistinguishUnitaries 40.0%); and (3) chain-of-thought prompting shows a modestly bimodal effect -- it is the best strategy for three models (two of them explicitly reasoning-tuned per vendor documentation) but degrades performance for the rest, leaving it mid-pack in aggregate (56.3% mean) behind few-shot-5 (57.8%). We release the benchmark, evaluation framework, and baseline results to support research on LLM capabilities in quantum computing.

Hypergraph partitioning is a central component of distributed quantum computing (DQC) compilers. However, due to the limited size of available quantum benchmark suites, many partitioning studies rely on random quantum circuits as evaluation workloads. In this work, we investigate whether such benchmarking practices provide a faithful assessment of partitioner performance. We evaluate a diverse set of state-of-the-art hypergraph partitioning strategies across three circuit origins: real algorithmic circuits, structured generated circuits, and fully random circuits. Our results show that random circuits significantly distort partitioning evaluation. They inflate cut costs, alter scaling trends across QPU counts and circuit sizes, and change the relative ranking of partitioning strategies. In contrast, structured generated circuits exhibit substantially lower distortion, more closely approximating real workload behaviour in cost, scaling, and strategy rankings. These findings demonstrate that benchmark selection directly influences methodological conclusions in DQC research and that random circuits may provide misleading guidance for compiler design.

Finite quantum-logical constructions can appear classical or nonclassical depending on which structure is retained. We distinguish incidence tests based on valuations, colorings, and partition representations; simplex-embedding tests for specified prepare-and-measure fragments; and operator-functional tests imposing spectral and product rules. We show that the collective GHZ joint measurement is a single Boolean context and becomes nonclassical only when a common assignment of local factors, together with product preservation, is required. For selected labelled ray fragments, we compute state-depolarizing thresholds for a restricted projector-cone factorization and for a specified vector-generated operational closure, separating exact primal--dual certificates from numerical estimates. These values are properties of the stated fragments and noise model, not invariants of the underlying hypergraphs or a universal ordering of contextuality.

Quantum computing has the potential to revolutionize multiple fields by solving complex problems that can not be solved in reasonable time with current classical computers. Nevertheless, the development of quantum computers is still in its early stages and the available systems have still very limited resources. As such, currently, the most practical way to develop and test quantum algorithms is to use classical simulators of quantum computers. In addition, the development of new quantum computers and their components also depends on simulations. Given the characteristics of a quantum computer, their simulation is a very demanding application in terms of both computation and memory. As such, simulations do not scale well in current classical systems. Thus different optimization and approximation techniques need to be applied at different levels. This review provides an overview of the components of a quantum computer, the levels at which these components and the whole quantum computer can be simulated, and an in-depth analysis of different state-of-the-art acceleration approaches. Besides the optimizations that can be performed at the algorithmic level, this review presents the most promising hardware-aware optimizations and future directions that can be explored for improving the performance and scalability of the simulations.

Migrating quantum algorithms across evolving frameworks introduces subtle behavioral changes that affect accuracy and reproducibility. This paper reports our experience converting the Quantum Approximate Optimization Algorithm (QAOA) from Qiskit Algorithms with Qiskit 1.x (v1 primitives) to a custom implementation using Qiskit 2.x (v2 primitives). Despite identical circuits, optimizers, and Hamiltonians, the new version produced drastically different results. A systematic analysis revealed the root cause: the sampling budget -- the number of circuit executions (shots) per iteration. The library's implicit use of unlimited shots yielded dense probability distributions, whereas the v2 default of 10 000 shots captured only 23% of the state space. Increasing shots to 250 000 restored library-level accuracy. This study highlights how hidden parameters at the quantum-classical interaction level can dominate hybrid algorithm performance and provides actionable recommendations for developers and framework designers to ensure reproducible results in quantum software migration.

The recent development of quantum computing, which uses entanglement, superposition, and other quantum fundamental concepts, can provide substantial processing advantages over traditional computing. These quantum features help solve many complex problems that cannot be solved otherwise with conventional computing methods. These problems include modeling quantum mechanics, logistics, chemical-based advances, drug design, statistical science, sustainable energy, banking, reliable communication, and quantum chemical engineering. The last few years have witnessed remarkable progress in quantum software and algorithm creation and quantum hardware research, which has significantly advanced the prospect of realizing quantum computers. It would be helpful to have comprehensive literature research on this area to grasp the current status and find outstanding problems that require considerable attention from the research community working in the quantum computing industry. To better understand quantum computing, this paper examines the foundations and vision based on current research in this area. We discuss cutting-edge developments in quantum computer hardware advancement and subsequent advances in quantum cryptography, quantum software, and high-scalability quantum computers. Many potential challenges and exciting new trends for quantum technology research and development are highlighted in this paper for a broader debate.

Artificial neural networks are the heart of machine learning algorithms and artificial intelligence protocols. Historically, the simplest implementation of an artificial neuron traces back to the classical Rosenblatt's `perceptron', but its long term practical applications may be hindered by the fast scaling up of computational complexity, especially relevant for the training of multilayered perceptron networks. Here we introduce a quantum information-based algorithm implementing the quantum computer version of a perceptron, which shows exponential advantage in encoding resources over alternative realizations. We experimentally test a few qubits version of this model on an actual small-scale quantum processor, which gives remarkably good answers against the expected results. We show that this quantum model of a perceptron can be used as an elementary nonlinear classifier of simple patterns, as a first step towards practical training of artificial quantum neural networks to be efficiently implemented on near-term quantum processing hardware.

This paper presents ``Stim", a fast simulator for quantum stabilizer circuits. The paper explains how Stim works and compares it to existing tools. With no foreknowledge, Stim can analyze a distance 100 surface code circuit (20 thousand qubits, 8 million gates, 1 million measurements) in 15 seconds and then begin sampling full circuit shots at a rate of 1 kHz. Stim uses a stabilizer tableau representation, similar to Aaronson and Gottesman's CHP simulator, but with three main improvements. First, Stim improves the asymptotic complexity of deterministic measurement from quadratic to linear by tracking the {\em inverse} of the circuit's stabilizer tableau. Second, Stim improves the constant factors of the algorithm by using a cache-friendly data layout and 256 bit wide SIMD instructions. Third, Stim only uses expensive stabilizer tableau simulation to create an initial reference sample. Further samples are collected in bulk by using that sample as a reference for batches of Pauli frames propagating through the circuit.

Quantum machine learning implemented by variational quantum circuits (VQCs) is considered a promising concept for the noisy intermediate-scale quantum computing era. Focusing on applications in quantum reinforcement learning, we propose a specific action decoding procedure for a quantum policy gradient approach. We introduce a novel quality measure that enables us to optimize the classical post-processing required for action selection, inspired by local and global quantum measurements. The resulting algorithm demonstrates a significant performance improvement in several benchmark environments. With this technique, we successfully execute a full training routine on a 5-qubit hardware device. Our method introduces only negligible classical overhead and has the potential to improve VQC-based algorithms beyond the field of quantum reinforcement learning.

Previous theoretical and experimental research has shown that current NISQ devices constitute powerful platforms for analogue quantum simulation. With the exquisite level of control offered by state-of-the-art quantum computers, we show that one can go further and implement a wide class of Floquet Hamiltonians, or timedependent Hamiltonians in general. We then implement a single-qubit version of these models in the IBM Quantum Experience and experimentally realize a temporal version of the Bernevig-Hughes-Zhang Chern insulator. From our data we can infer the presence of a topological transition, thus realizing an earlier proposal of topological frequency conversion by Martin, Refael, and Halperin. Our study highlights promises and limitations when studying many-body systems through multi-frequency driving of quantum computers.

While recent breakthroughs have proven the ability of noisy intermediate-scale quantum (NISQ) devices to achieve quantum advantage in classically-intractable sampling tasks, the use of these devices for solving more practically relevant computational problems remains a challenge. Proposals for attaining practical quantum advantage typically involve parametrized quantum circuits (PQCs), whose parameters can be optimized to find solutions to diverse problems throughout quantum simulation and machine learning. However, training PQCs for real-world problems remains a significant practical challenge, largely due to the phenomenon of barren plateaus in the optimization landscapes of randomly-initialized quantum circuits. In this work, we introduce a scalable procedure for harnessing classical computing resources to provide pre-optimized initializations for PQCs, which we show significantly improves the trainability and performance of PQCs on a variety of problems. Given a specific optimization task, this method first utilizes tensor network (TN) simulations to identify a promising quantum state, which is then converted into gate parameters of a PQC by means of a high-performance decomposition procedure. We show that this learned initialization avoids barren plateaus, and effectively translates increases in classical resources to enhanced performance and speed in training quantum circuits. By demonstrating a means of boosting limited quantum resources using classical computers, our approach illustrates the promise of this synergy between quantum and quantum-inspired models in quantum computing, and opens up new avenues to harness the power of modern quantum hardware for realizing practical quantum advantage.