Daily Papers

Two widely adopted techniques for LLM inference serving systems today are hybrid batching and disaggregated serving. A hybrid batch combines prefill and decode tokens of different requests in the same batch to improve resource utilization and throughput at the cost of increased latency per token. In contrast, disaggregated serving decouples compute-bound prefill and bandwidth-bound decode phases to optimize for service level objectives (SLOs) at the cost of resource under-utilization and KV-cache transfer overheads. To address the limitations of these techniques, we propose RAPID-Serve: a technique to concurrently execute prefill and decode on the same GPU(s) to meet latency SLOs while maintaining high throughput and efficient resource utilization. Furthermore, we propose Adaptive Resource Management for runtime compute resource allocation, optionally leveraging CU masking (a fine-grained Compute Unit partitioning feature on AMD InstinctTM GPUs). RAPID-Serve provides up to 4.1x (average 1.7x) unconstrained throughput improvement and 32x and higher (average 4.9x) throughput improvement under SLO constraints, showing it as an effective strategy compared to the state-of-the-art approaches, particularly in resource-constrained environments.

Frontier coding agents are increasingly framed as end-to-end automated researchers, and ML for science offers a demanding test of that promise: improving a scientific model often requires domain insight beyond routine ML engineering. We introduce Agent4Sci, a long-horizon testbed for measuring how far today's agents can improve the published best models on scientific ML benchmarks, spanning 20 benchmarks across 11 domains. Rather than ranking agents on a leaderboard, Agent4Sci asks what kinds of progress agents can make on these tasks under in-the-wild conditions, and where they fall short. Empirically, today's frontier agents advance the published best on every benchmark, with Claude Opus reaching 10.4% mean relative improvement and no run flagged for academic misconduct. These gains, however, come almost entirely from a bag of ML-engineering tricks rather than research-level insight. Trajectory analysis surfaces three recurring limitations in this setting: novelty miscalibration, resource under-utilization, and rapid collapse into local engineering sweeps. Lightweight plug-in skills for research ideation, experiment management, and scheduled checklists raise Claude Opus from 10.4% to 20.1% and Codex from 4.4% to 8.1%, while yielding more diverse, domain-relevant interventions. Agent4Sci gives the community a way to track and push frontier agents from ML engineering toward domain insight on real-world ML-for-science problems. Code and data are available on GitHub (https://github.com/maszhongming/agent4sci) and Hugging Face (https://huggingface.co/datasets/MingZhong/agent4sci).

Extending the context length (i.e., the maximum supported sequence length) of LLMs is of paramount significance. To facilitate long context training of LLMs, sequence parallelism has emerged as an essential technique, which scatters each input sequence across multiple devices and necessitates communication to process the sequence. In essence, existing sequence parallelism methods assume homogeneous sequence lengths (i.e., all input sequences are equal in length) and therefore leverages a single, static scattering strategy for all input sequences. However, in reality, the sequence lengths in LLM training corpora exhibit substantial variability, often following a long-tail distribution, which leads to workload heterogeneity. In this paper, we show that employing a single, static strategy results in inefficiency and resource under-utilization, highlighting the need for adaptive approaches to handle the heterogeneous workloads across sequences. To address this, we propose a heterogeneity-adaptive sequence parallelism method. For each training step, our approach captures the variability in sequence lengths and assigns the optimal combination of scattering strategies based on workload characteristics. We model this problem as a linear programming optimization and design an efficient and effective solver to find the optimal solution. Furthermore, we implement our method in a high-performance system that supports adaptive parallelization in distributed LLM training. Experimental results demonstrate that our system outperforms state-of-the-art training frameworks by up to 1.98x.

Mixture of Experts (MoE) LLMs, characterized by their sparse activation patterns, offer a promising approach to scaling language models while avoiding proportionally increasing the inference cost. However, their large parameter sizes present deployment challenges in resource-constrained environments with limited GPU memory capacity, as GPU memory is often insufficient to accommodate the full set of model weights. Consequently, typical deployments rely on CPU-GPU hybrid execution: the GPU handles compute-intensive GEMM operations, while the CPU processes the relatively lightweight attention mechanism. This setup introduces a key challenge: how to effectively optimize resource utilization across CPU and GPU? Prior work has designed system optimizations based on performance models with limited scope. Specifically, such models do not capture the complex interactions between hardware properties and system execution mechanisms. Therefore, previous approaches neither identify nor achieve the hardware limit. This paper presents MoE-Lens, a high-throughput MoE LLM inference system designed through holistic performance modeling for resource-constrained environments. Our performance model thoroughly analyzes various fundamental system components, including CPU memory capacity, GPU compute power, and workload characteristics, to understand the theoretical performance upper bound of MoE inference. Furthermore, it captures the system execution mechanisms to identify the key hardware bottlenecks and accurately predict the achievable throughput. Informed by our performance model, MoE-Lens introduces an inference system approaching hardware limits. Evaluated on diverse MoE models and datasets, MoE-Lens outperforms the state-of-the-art solution by 4.6x on average (up to 25.5x), with our theoretical model predicting performance with an average 94% accuracy.

Recently, great progress has been made in video generation technology, attracting the widespread attention of scholars. To apply this technology to downstream applications under resource-constrained conditions, researchers usually fine-tune the pre-trained models based on parameter-efficient tuning methods such as Adapter or Lora. Although these methods can transfer the knowledge from the source domain to the target domain, fewer training parameters lead to poor fitting ability, and the knowledge from the source domain may lead to the inference process deviating from the target domain. In this paper, we argue that under constrained resources, training a smaller video generation model from scratch using only million-level samples can outperform parameter-efficient tuning on larger models in downstream applications: the core lies in the effective utilization of data and curriculum strategy. Take animated sticker generation (ASG) as a case study, we first construct a discrete frame generation network for stickers with low frame rates, ensuring that its parameters meet the requirements of model training under constrained resources. In order to provide data support for models trained from scratch, we come up with a dual-mask based data utilization strategy, which manages to improve the availability and expand the diversity of limited data. To facilitate convergence under dual-mask situation, we propose a difficulty-adaptive curriculum learning method, which decomposes the sample entropy into static and adaptive components so as to obtain samples from easy to difficult. The experiment demonstrates that our resource-efficient dual-mask training framework is quantitatively and qualitatively superior to efficient-parameter tuning methods such as I2V-Adapter and SimDA, verifying the feasibility of our method on downstream tasks under constrained resources. Code will be available.

Large Reasoning Models (LRMs) employ reasoning to address complex tasks. Such explicit reasoning requires extended context lengths, resulting in substantially higher resource consumption. Prior work has shown that adversarially crafted inputs can trigger redundant reasoning processes, exposing LRMs to resource-exhaustion vulnerabilities. However, the reasoning process itself, especially its reflective component, has received limited attention, even though it can lead to over-reflection and consume excessive computing power. In this paper, we introduce Recursive Entropy to quantify the risk of resource consumption in reflection, thereby revealing the safety issues inherent in inference itself. Based on Recursive Entropy, we introduce RECUR, a resource exhaustion attack via Recursive Entropy guided Counterfactual Utilization and Reflection. It constructs counterfactual questions to verify the inherent flaws and risks of LRMs. Extensive experiments demonstrate that, under benign inference, recursive entropy exhibits a pronounced decreasing trend. RECUR disrupts this trend, increasing the output length by up to 11x and decreasing throughput by 90%. Our work provides a new perspective on robust reasoning.

The surging demand for cloud computing resources, driven by the rapid growth of sophisticated large-scale models and data centers, underscores the critical importance of efficient and adaptive resource allocation. As major tech enterprises deploy massive infrastructures with thousands of GPUs, existing cloud platforms still struggle with low resource utilization due to key challenges: capturing hierarchical indicator structures, modeling non-Gaussian distributions, and decision-making under uncertainty. To address these challenges, we propose HRAMONY, an adaptive Hierarchical Attention-based Resource Modeling and Decision-Making System. HARMONY combines hierarchical multi-indicator distribution forecasting and uncertainty-aware Bayesian decision-making. It introduces a novel hierarchical attention mechanism that comprehensively models complex inter-indicator dependencies, enabling accurate predictions that can adapt to evolving environment states. By transforming Gaussian projections into adaptive non-Gaussian distributions via Normalizing Flows. Crucially, HARMONY leverages the full predictive distributions in an adaptive Bayesian process, proactively incorporating uncertainties to optimize resource allocation while robustly meeting SLA constraints under varying conditions. Extensive evaluations across four large-scale cloud datasets demonstrate HARMONY's state-of-the-art performance, significantly outperforming nine established methods. A month-long real-world deployment validated HARMONY's substantial practical impact, realizing over 35,000 GPU hours in savings and translating to $100K+ in cost reduction, showcasing its remarkable economic value through adaptive, uncertainty-aware scaling. Our code is available at https://github.com/Floating-LY/HARMONY1.

We present Ring-1T, the first open-source, state-of-the-art thinking model with a trillion-scale parameter. It features 1 trillion total parameters and activates approximately 50 billion per token. Training such models at a trillion-parameter scale introduces unprecedented challenges, including train-inference misalignment, inefficiencies in rollout processing, and bottlenecks in the RL system. To address these, we pioneer three interconnected innovations: (1) IcePop stabilizes RL training via token-level discrepancy masking and clipping, resolving instability from training-inference mismatches; (2) C3PO++ improves resource utilization for long rollouts under a token budget by dynamically partitioning them, thereby obtaining high time efficiency; and (3) ASystem, a high-performance RL framework designed to overcome the systemic bottlenecks that impede trillion-parameter model training. Ring-1T delivers breakthrough results across critical benchmarks: 93.4 on AIME-2025, 86.72 on HMMT-2025, 2088 on CodeForces, and 55.94 on ARC-AGI-v1. Notably, it attains a silver medal-level result on the IMO-2025, underscoring its exceptional reasoning capabilities. By releasing the complete 1T parameter MoE model to the community, we provide the research community with direct access to cutting-edge reasoning capabilities. This contribution marks a significant milestone in democratizing large-scale reasoning intelligence and establishes a new baseline for open-source model performance.

Large Language Model (LLM)-driven Multi-Agent Systems (MAS) have demonstrated strong capability in complex reasoning and tool use, and heterogeneous agent pools further broaden the quality--cost trade-off space. Despite these advances, real-world deployment is often constrained by high inference cost, latency, and limited transparency, which hinders scalable and efficient routing. Existing routing strategies typically rely on expensive LLM-based selectors or static policies, and offer limited controllability for semantic-aware routing under dynamic loads and mixed intents, often resulting in unstable performance and inefficient resource utilization. To address these limitations, we propose AMRO-S, an efficient and interpretable routing framework for Multi-Agent Systems (MAS). AMRO-S models MAS routing as a semantic-conditioned path selection problem, enhancing routing performance through three key mechanisms: First, it leverages a supervised fine-tuned (SFT) small language model for intent inference, providing a low-overhead semantic interface for each query; second, it decomposes routing memory into task-specific pheromone specialists, reducing cross-task interference and optimizing path selection under mixed workloads; finally, it employs a quality-gated asynchronous update mechanism to decouple inference from learning, optimizing routing without increasing latency. Extensive experiments on five public benchmarks and high-concurrency stress tests demonstrate that AMRO-S consistently improves the quality--cost trade-off over strong routing baselines, while providing traceable routing evidence through structured pheromone patterns.

Agentic Reinforcement Learning (RL) enables Large Language Models (LLMs) to perform autonomous decision-making and long-term planning. Unlike standard LLM post-training, agentic RL workloads are highly heterogeneous, combining compute-intensive prefill phases, bandwidth-bound decoding, and stateful, CPU-heavy environment simulations. We argue that efficient agentic RL training requires disaggregated infrastructure to leverage specialized, best-fit hardware. However, naive disaggregation introduces substantial synchronization overhead and resource underutilization due to the complex dependencies between stages. We present RollArc, a distributed system designed to maximize throughput for multi-task agentic RL on disaggregated infrastructure. RollArc is built on three core principles: (1) hardware-affinity workload mapping, which routes compute-bound and bandwidth-bound tasks to bestfit GPU devices, (2) fine-grained asynchrony, which manages execution at the trajectory level to mitigate resource bubbles, and (3) statefulness-aware computation, which offloads stateless components (e.g., reward models) to serverless infrastructure for elastic scaling. Our results demonstrate that RollArc effectively improves training throughput and achieves 1.35-2.05\(\times\) end-to-end training time reduction compared to monolithic and synchronous baselines. We also evaluate RollArc by training a hundreds-of-billions-parameter MoE model for Qoder product on an Alibaba cluster with more than 3,000 GPUs, further demonstrating RollArc scalability and robustness. The code is available at https://github.com/alibaba/ROLL.

The number of processing elements (PEs) in a fixed-sized systolic accelerator is well matched for large and compute-bound DNNs; whereas, memory-bound DNNs suffer from PE underutilization and fail to achieve peak performance and energy efficiency. To mitigate this, specialized dataflow and/or micro-architectural techniques have been proposed. However, due to the longer development cycle and the rapid pace of evolution in the deep learning fields, these hardware-based solutions can be obsolete and ineffective in dealing with PE underutilization for state-of-the-art DNNs. In this work, we address the challenge of PE underutilization at the algorithm front and propose data reuse aware co-optimization (DRACO). This improves the PE utilization of memory-bound DNNs without any additional need for dataflow/micro-architecture modifications. Furthermore, unlike the previous co-optimization methods, DRACO not only maximizes performance and energy efficiency but also improves the predictive performance of DNNs. To the best of our knowledge, DRACO is the first work that resolves the resource underutilization challenge at the algorithm level and demonstrates a trade-off between computational efficiency, PE utilization, and predictive performance of DNN. Compared to the state-of-the-art row stationary dataflow, DRACO achieves 41.8% and 42.6% improvement in average PE utilization and inference latency (respectively) with negligible loss in predictive performance in MobileNetV1 on a 64times64 systolic array. DRACO provides seminal insights for utilization-aware DNN design methodologies that can fully leverage the computation power of systolic array-based hardware accelerators.

Large Language Model (LLM) inference on large-scale systems is expected to dominate future cloud infrastructures. Efficient LLM inference in cloud environments with numerous AI accelerators is challenging, necessitating extensive optimizations for optimal performance. Current systems batch prefill and decoding to boost throughput but encounter latency issues, while others disaggregate these phases, leading to resource underutilization. We propose AcceLLM, a novel method addressing latency and load balancing, inspired by the cache data management. It strategically utilizes redundant data to enhance inference via load balancing and optimal hardware use. Simulated evaluations on Nvidia H100 GPU and Huawei Ascend 910B2 show AcceLLM surpasses state-of-the-art systems up to 30% in latency and efficiency, handling diverse workloads effectively.

Despite algorithm-level innovations for multi-agent reinforcement learning (MARL), the underlying networked infrastructure for large-scale MARL training remains underexplored. Existing training frameworks primarily optimize for single-agent scenarios and fail to address the unique system-level challenges of MARL, including rollout-training synchronization barriers, rollout load imbalance, and training resource underutilization. To bridge this gap, we propose FlexMARL, the first end-to-end training framework that holistically optimizes rollout, training, and their orchestration for large-scale LLM-based MARL. Specifically, FlexMARL introduces the joint orchestrator to manage data flow under the rollout-training disaggregated architecture. Building upon the experience store, a novel micro-batch driven asynchronous pipeline eliminates the synchronization barriers while providing strong consistency guarantees. Rollout engine adopts a parallel sampling scheme combined with hierarchical load balancing, which adapts to skewed inter/intra-agent request patterns. Training engine achieves on-demand hardware binding through agent-centric resource allocation. The training states of different agents are swapped via unified and location-agnostic communication. Empirical results on a large-scale production cluster demonstrate that FlexMARL achieves up to 7.3x speedup and improves hardware utilization by up to 5.6x compared to existing frameworks.

Getting the most out of limited resources allows advances in natural language processing (NLP) research and practice while being conservative with resources. Those resources may be data, time, storage, or energy. Recent work in NLP has yielded interesting results from scaling; however, using only scale to improve results means that resource consumption also scales. That relationship motivates research into efficient methods that require less resources to achieve similar results. This survey relates and synthesises methods and findings in those efficiencies in NLP, aiming to guide new researchers in the field and inspire the development of new methods.

Machine learning (ML) model serving has become a dominant consumer of GPU infrastructure, yet capacity planning in these systems remains largely ad hoc. Under-provisioning leads to service-level objective (SLO) violations and production incidents, while over-provisioning results in substantial resource waste. This paper presents \sys, an industrial load testing framework for ML serving systems that systematically estimates serving capacity through an adaptive, feedback-driven search strategy. The approach leverages real-time performance signals, incorporating dampening, spike tolerance, and convergence detection to efficiently identify maximum sustainable throughput under SLO constraints. We evaluate \sys through a longitudinal analysis of 14 industrial case studies spanning four ML architecture classes: recommendation, ranking, vision, and NLP. This study demonstrates that systematic load testing leads to substantial improvements in GPU resource efficiency and operational reliability. Prior to adopting \sys, a significant fraction of model launches were under-provisioned, resulting in recurring incidents; these issues were substantially reduced after deployment. Our results show that ML-specific design decisions are critical to accurate capacity estimation: workload calibration using recorded traffic reduces estimation error from approximately 30\% to 2--6\%, while proper warmup handling yields a 22.2\% improvement in accuracy. Further analysis reveals key factors influencing prediction error, including model size and co-location effects. This paper distills six lessons and derive architectural guidelines for ML load testing, offering actionable insights for building reliable and efficient ML serving systems.

Scheduling precedence-constrained tasks under shared renewable resources is central to modern computing platforms. The Resource Investment Problem (RIP) models this setting by minimizing the cost of provisioned renewable resources under precedence and timing constraints. Exact mixed-integer programming and constraint programming become impractically slow on large instances, and dynamic updates require schedule revisions under tight latency budgets. We present iScheduler, a reinforcement-learning-driven iterative scheduling framework that formulates RIP solving as a Markov decision process over decomposed subproblems and constructs schedules through sequential process selection. The framework accelerates optimization and supports reconfiguration by reusing unchanged process schedules and rescheduling only affected processes. We also release L-RIPLIB, an industrial-scale benchmark derived from cloud-platform workloads with 1,000 instances of 2,500-10,000 tasks. Experiments show that iScheduler attains competitive resource costs while reducing time to feasibility by up to 43times against strong commercial baselines.

Every public LLM cost calculator we surveyed treats GPU utilization as a fixed input -- entered by the user, baked in as a preset, or silently assumed at 100% -- never measured against the operator's actual load. We show that this assumption is the dominant source of error: on identical H100 hardware, effective cost spans \0.21 to 15.25 per million output tokens, an underutilization penalty of 2.5-24x across low-to-moderate enterprise loads (1-10 rps) and up to 36.3x near idle -- driven by one operator-controlled variable, offered request rate lambda, which sets in-flight concurrency via Little's Law and which no open-source calculator exposes. Because calculators take utilization as a user-supplied input, any utilization-naive estimate understates true cost by exactly 1/U, systematically mispricing self-hosting -- most severely over-selling it for low-traffic workloads. We propose a measurement methodology that parameterizes the relationship as C_eff = f(H, M, Q, lambda, L), validate it with 42 benchmarks across dense, ultra-sparse MoE, and sparse MoE models, and release vllm-cost-meter, an open-source cost meter that attaches to a live vLLM server and reports real \$/M-tokens against the operator's own traffic. We further show that FP8 quantization benefits the MoE architectures we tested roughly 2.2-2.4x more than the dense model (+69 to +74% vs. +31% peak throughput; n=3, broader validation needed), and our data are consistent with active parameter count, not total model size, being a primary predictor of saturation economics. To rule out single-hardware confounding we repeat the core sweep on A100 80GB PCIe (56 runs): the load-driven spread reproduces at 7.0-11.4x, the active-parameters ordering survives at FP8, and the dense-FP8 advantage inverts on silicon without native FP8 tensor cores -- a hardware-conditional caveat the framework already accommodates.

Parameter-Efficient Fine-Tuning (PEFT) is widely applied as the backend of fine-tuning APIs for large language model (LLM) customization in datacenters. Service providers deploy separate instances for individual PEFT tasks, giving rise to prominent resource inefficiencies, including (1) GPU underutilization from small-scale, PEFT-native operators and (2) device stalls from communication delays and data dependencies in parallelized execution. To address these issues, this paper presents MuxTune, a fine-tuning system that enables resource-efficient concurrent execution of multiple PEFT tasks. The key idea is to multiplex the backbone across independent tasks in a spatial-temporal manner for improved utilization and reduced stalls. Building on flexible, modularized backbone sharing via unified PEFT representations, MuxTune proposes hierarchical co-scheduling scheme with task, operator, and data-level optimizations. Specifically, it fuses tasks through a hybrid of spatial and temporal multiplexing, and orchestrates multi-task operator execution in two-tiered hybrid parallelism. Additionally, MuxTune employs chunk-based data alignment to mitigate inter-task ineffective tokens. Experimental results demonstrate that MuxTune achieves up to 2.33times higher throughput and 5.29times memory reduction compared to three state-of-the-art baselines.

Energy is now a critical ML computing resource. While measuring energy consumption and observing trends is a valuable first step, accurately understanding and diagnosing why those differences occur is crucial for optimization. To that end, we begin by presenting a large-scale measurement study of inference time and energy across the generative AI landscape with 46 models, 7 tasks, and 1,858 different configurations on NVIDIA H100 and B200 GPUs. Our empirical findings span order-of-magnitude variations: LLM task type can lead to 25times energy differences, video generation sometimes consumes more than 100times the energy of images, and GPU utilization differences can result in 3--5times energy differences. Based on our observations, we present a framework for reasoning about the underlying mechanisms that govern time and energy consumption. The essence is that time and energy are determined by latent metrics like memory and utilization, which are in turn affected by various factors across the algorithm, software, and hardware layers. Our framework also extends directly to throughput per watt, a critical metric for power-constrained datacenters.

The burgeoning field of Large Language Models (LLMs), exemplified by sophisticated models like OpenAI's ChatGPT, represents a significant advancement in artificial intelligence. These models, however, bring forth substantial challenges in the high consumption of computational, memory, energy, and financial resources, especially in environments with limited resource capabilities. This survey aims to systematically address these challenges by reviewing a broad spectrum of techniques designed to enhance the resource efficiency of LLMs. We categorize methods based on their optimization focus: computational, memory, energy, financial, and network resources and their applicability across various stages of an LLM's lifecycle, including architecture design, pretraining, finetuning, and system design. Additionally, the survey introduces a nuanced categorization of resource efficiency techniques by their specific resource types, which uncovers the intricate relationships and mappings between various resources and corresponding optimization techniques. A standardized set of evaluation metrics and datasets is also presented to facilitate consistent and fair comparisons across different models and techniques. By offering a comprehensive overview of the current sota and identifying open research avenues, this survey serves as a foundational reference for researchers and practitioners, aiding them in developing more sustainable and efficient LLMs in a rapidly evolving landscape.

Modern applications increasingly rely on inference serving systems to provide low-latency insights with a diverse set of machine learning models. Existing systems often utilize resource elasticity to scale with demand. However, many applications cannot rely on hardware scaling when deployed at the edge or other resource-constrained environments. In this work, we propose a model selection and scheduling algorithm that implements accuracy scaling to increase efficiency for these more constrained deployments. We show that existing schedulers that make decisions using profiled model accuracy are biased toward the label distribution present in the test dataset. To address this problem, we propose using ML models -- which we call SneakPeek models -- to dynamically adjust estimates of model accuracy, based on the underlying data. Furthermore, we greedily incorporate inference batching into scheduling decisions to improve throughput and avoid the overhead of swapping models in and out of GPU memory. Our approach employs a new notion of request priority, which navigates the trade-off between attaining high accuracy and satisfying deadlines. Using data and models from three real-world applications, we show that our proposed approaches result in higher-utility schedules and higher accuracy inferences in these hardware-constrained environments.

Higher Degree by Research (HDR) candidates increasingly depend on cloud-provisioned virtual machines and local GPU hardware for their computational experiments, yet a persistent and under-addressed gap exists between having compute resources and using them productively. Cloud and infrastructure teams can provision virtual machines, but the path from a raw VM to a reproducible, GPU-ready research environment remains a significant barrier for researchers who are domain experts, not systems engineers. We identify this gap as a missing adapter layer between cloud provisioning and interactive research work. We present a lightweight, open-source solution built on k3s and Coder that implements this adapter layer and is already in active use in our research workspace environment. Our CI/CD pipeline connects GitHub directly to the local cluster, deploying research projects in under five minutes. We define a concrete metrics framework for evaluating this layer -- covering deployment latency, environment reproducibility, onboarding friction, and resource utilisation -- and establish baselines against which improvements can be measured.

Effective multi-user delay-constrained scheduling is crucial in various real-world applications, including embodied AI, instant messaging, live streaming, and data center management, where efficient resource allocation is required among users with diverse delay sensitivities. In these scenarios, schedulers must make real-time decisions to satisfy both delay and resource constraints without prior knowledge of system dynamics, which are often time-varying and challenging to estimate. {Current learning-based methods typically require online interactions with actual systems during the training stage. Therefore, these approaches are often difficult or impractical, as they can significantly degrade system performance and incur substantial service costs.} To address these challenges, we propose a novel offline reinforcement learning-based algorithm, named Scheduling By Offline Learning with Critic Guidance and Diffusion Model (SOCD), to learn efficient scheduling policies purely from pre-collected offline data. SOCD innovatively employs a diffusion policy, complemented by a sampling-free critic network for policy guidance. By integrating the Lagrangian multiplier optimization into the offline reinforcement learning, SOCD efficiently trains high-quality constraint-aware policies exclusively from available datasets, eliminating the need for online interactions with the system. Experimental results demonstrate that SOCD is resilient to various system dynamics, including partially observable and large-scale environments, and delivers superior performance compared to existing methods.

Data preprocessing pipelines, which includes data decoding, cleaning, and transforming, are a crucial component of Machine Learning (ML) training. Thy are computationally intensive and often become a major bottleneck, due to the increasing performance gap between the CPUs used for preprocessing and the GPUs used for model training. Recent studies show that a significant number of CPUs across several machines are required to achieve sufficient throughput to saturate the GPUs, leading to increased resource and energy consumption. When the pipeline involves vocabulary generation, the preprocessing performance scales poorly due to significant row-wise synchronization overhead between different CPU cores and servers. To address this limitation, in this paper we present the design of Piper, a hardware accelerator for tabular data preprocessing, prototype it on FPGAs, and demonstrate its potential for training pipelines of commercial recommender systems. Piper achieves 4.7 sim 71.3times speedup in latency over a 128-core CPU server and outperforms a data-center GPU by 4.8sim 20.3times when using binary input. The impressive performance showcases Piper's potential to increase the efficiency of data preprocessing pipelines and significantly reduce their resource consumption.

Many applications must provide low-latency LLM service to users or risk unacceptable user experience. However, over-provisioning resources to serve fluctuating request patterns is often prohibitively expensive. In this work, we present a best-effort serving system that employs deep reinforcement learning to adjust service quality based on the task distribution and system load. Our best-effort system can maintain availability with over 10x higher client request rates, serves above 96% of peak performance 4.1x more often, and serves above 98% of peak performance 2.3x more often than static serving on unpredictable workloads. Our learned router is robust to shifts in both the arrival and task distribution. Compared to static serving, learned best-effort serving allows for cost-efficient serving through increased hardware utility. Additionally, we argue that learned best-effort LLM serving is applicable in wide variety of settings and provides application developers great flexibility to meet their specific needs.

Large Language Models (LLM)-based systems, i.e. interconnected elements that include an LLM as a central component (e.g., conversational agents), are typically monolithic static architectures that rely on a single LLM for all user queries. However, they often require different preprocessing strategies, levels of reasoning, or knowledge. Generalist LLMs (i.e. GPT-4), trained on very large multi-topic corpora, can perform well in a variety of tasks. However, they require significant financial, energy, and hardware resources that may not be justified for basic tasks. This implies potentially investing in unnecessary costs for a given query. To overcome this problem, a routing mechanism routes user queries to the most suitable components, such as smaller LLMs or experts in specific topics. This approach may improve response quality while minimising costs. Routing can be expanded to other components of the conversational agent architecture, such as the selection of optimal embedding strategies. This paper explores key considerations for integrating routing into LLM-based systems, focusing on resource management, cost definition, and strategy selection. Our main contributions include a formalisation of the problem, a novel taxonomy of existing approaches emphasising relevance and resource efficiency, and a comparative analysis of these strategies in relation to industry practices. Finally, we identify critical challenges and directions for future research.