Daily Papers

In this work, we study the performance of sub-gradient method (SubGM) on a natural nonconvex and nonsmooth formulation of low-rank matrix recovery with ell_1-loss, where the goal is to recover a low-rank matrix from a limited number of measurements, a subset of which may be grossly corrupted with noise. We study a scenario where the rank of the true solution is unknown and over-estimated instead. The over-estimation of the rank gives rise to an over-parameterized model in which there are more degrees of freedom than needed. Such over-parameterization may lead to overfitting, or adversely affect the performance of the algorithm. We prove that a simple SubGM with small initialization is agnostic to both over-parameterization and noise in the measurements. In particular, we show that small initialization nullifies the effect of over-parameterization on the performance of SubGM, leading to an exponential improvement in its convergence rate. Moreover, we provide the first unifying framework for analyzing the behavior of SubGM under both outlier and Gaussian noise models, showing that SubGM converges to the true solution, even under arbitrarily large and arbitrarily dense noise values, and--perhaps surprisingly--even if the globally optimal solutions do not correspond to the ground truth. At the core of our results is a robust variant of restricted isometry property, called Sign-RIP, which controls the deviation of the sub-differential of the ell_1-loss from that of an ideal, expected loss. As a byproduct of our results, we consider a subclass of robust low-rank matrix recovery with Gaussian measurements, and show that the number of required samples to guarantee the global convergence of SubGM is independent of the over-parameterized rank.

This paper is devoted to uniform versions of the Hanson-Wright inequality for a random vector with independent centered α-subexponential entries, 0<αle 1. Our method relies upon a novel decoupling inequality and a comparison of weak and strong moments. As an application, we use the derived inequality to prove the restricted isometry property of partial random circulant matrices generated by standard α-subexponential random vectors, 0<αle 1.

The fundamental units of internal representations in large language models (LLMs) remain undefined, limiting further understanding of their mechanisms. Neurons or features are often regarded as such units, yet neurons suffer from polysemy, while features face concerns of unreliable reconstruction and instability. To address this issue, we propose the Atoms Theory, which defines such units as atoms. We introduce the atomic inner product (AIP) to correct representation shifting, formally define atoms, and prove the conditions that atoms satisfy the Restricted Isometry Property (RIP), ensuring stable sparse representations over atom set and linking to compressed sensing. Under stronger conditions, we further establish the uniqueness and exact ell_1 recoverability of the sparse representations, and provide guarantees that single-layer sparse autoencoders (SAEs) with threshold activations can reliably identify the atoms. To validate the Atoms Theory, we train threshold-activated SAEs on Gemma2-2B, Gemma2-9B, and Llama3.1-8B, achieving 99.9% sparse reconstruction across layers on average, and more than 99.8% of atoms satisfy the uniqueness condition, compared to 0.5% for neurons and 68.2% for features, showing that atoms more faithfully capture intrinsic representations of LLMs. Scaling experiments further reveal the link between SAEs size and recovery capacity. Overall, this work systematically introduces and validates Atoms Theory of LLMs, providing a theoretical framework for understanding internal representations and a foundation for mechanistic interpretability. Code available at https://github.com/ChenhuiHu/towards_atoms.

Mathematical programming formulations are routinely modified through algebraic reformulations, perturbations of constraint functions, and the addition or removal of constraints. Some of these modifications preserve the feasible set, whereas others reflect newly imposed modeling requirements and therefore change the optimization problem itself. This paper develops a metric framework for quantifying the robustness of formulation-dependent properties. Formulations are modeled as typed collections of constraint functions. Within each fixed typed-cardinality class, their distance is defined by optimally matching constraints of the same type and measuring the resulting discrepancies in a norm on the underlying function space. As a concrete demonstration of the framework, we study the Linear Independence Constraint Qualification (LICQ). We introduce the pointwise LICQ radius, defined as the distance from a feasible formulation to the set of formulations that remain feasible at a prescribed point but fail LICQ there. Under suitable assumptions, we derive an explicit formula for this radius and characterize the effect of adding a single equality or inequality constraint.

Let λ_{mathbb K}(m) denote the maximal absolute projection constant among m-dimensional Banach spaces over mathbb K=mathbb R or mathbb C. Its exact value is known only in a few cases, and determining it remains a challenging problem. In this note, we investigate several structured vector configurations that naturally arise in this context. We first recall the connection between maximal projection constants and tight frames, then consider biangular tight frames, and show that their relative and quasimaximal projection constants coincide. A particularly interesting example is provided by the midpoints of the edges of a regular simplex, which yield natural lower bounds for λ_{mathbb R}(m). Numerical evidence suggests that these bounds may be sharp in dimensions 6 and 8. We also discuss weighted spherical (2,2)-designs with a small number of vectors and their connection with maximal projection constants. Examples in dimensions 4 and 5 indicate that the sign patterns of their Gram matrices may play an important role. These observations lead us to formulate several conjectures concerning maximal absolute projection constants and the vector configurations associated with them.

To generalise evolution families we consider systems of contractions {varphi(u, v)}_{(u, v) in E} defined on the edges of a graph G = (Ω, E). In this setup the Markov property, or divisibility, can be modelled via varphi(u, v)varphi(v, w) = varphi(u, w) for edges (u, v), (v, w), (u, w) in E. We obtain results in three settings: 1) contractive Banach space operators; 2) positive unital maps on C^{ast}-algebras; and 3) CPTP-maps on trace class operators on a Hilbert space. In the discrete setting, we are able to dilate possibly indivisible families of contractions to divisible families of operators with 'nice' properties (viz. surjective isometries resp. C^{ast}-algebraic automorphisms resp. unitary representations). In the special case of linearly ordered graphs equipped with the order topology, we establish sufficient conditions for strongly continuous dilations of possibly indivisible families in the Banach space and C^{ast}-algebra contexts. To achieve these results we work with string-rewriting systems, and make use of and extend dilation theorems of Stroescu [44], Kraus [23, 24], and vom Ende--Dirr [50].

Invariance and equivariance to geometrical transformations have proven to be very useful inductive biases when training (convolutional) neural network models, especially in the low-data regime. Much work has focused on the case where the symmetry group employed is compact or abelian, or both. Recent work has explored enlarging the class of transformations used to the case of Lie groups, principally through the use of their Lie algebra, as well as the group exponential and logarithm maps. The applicability of such methods to larger transformation groups is limited by the fact that depending on the group of interest G, the exponential map may not be surjective. Further limitations are encountered when G is neither compact nor abelian. Using the structure and geometry of Lie groups and their homogeneous spaces, we present a framework by which it is possible to work with such groups primarily focusing on the Lie groups G = GL^{+}(n, R) and G = SL(n, R), as well as their representation as affine transformations R^{n} rtimes G. Invariant integration as well as a global parametrization is realized by decomposing the `larger` groups into subgroups and submanifolds which can be handled individually. Under this framework, we show how convolution kernels can be parametrized to build models equivariant with respect to affine transformations. We evaluate the robustness and out-of-distribution generalisation capability of our model on the standard affine-invariant benchmark classification task, where we outperform all previous equivariant models as well as all Capsule Network proposals.

We characterise sets of points of exceptional Lie incidence geometries, that is, the natural geometries arising from spherical buildings of exceptional types F_4, E_6, E_7, E_8 and G_2, that form a line using the opposition relation. With that, we obtain a classification of so-called ``geometric lines'' in many of these geometries. Furthermore, our results lead to a characterisation of geometric lines in finite exceptional Lie incidence geometries as minimal blocking sets, that is, point sets of the size of a line admitting no object opposite to all of their members, in most cases, and we classify all exceptions. As a further consequence, we obtain a characterisation of automorphisms of exceptional spherical buildings as certain opposition preserving maps.

Data augmentation is critical to the empirical success of modern self-supervised representation learning, such as contrastive learning and masked language modeling. However, a theoretical understanding of the exact role of augmentation remains limited. Recent work has built the connection between self-supervised learning and the approximation of the top eigenspace of a graph Laplacian operator, suggesting that learning a linear probe atop such representation can be connected to RKHS regression. Building on this insight, this work delves into a statistical analysis of augmentation-based pretraining. Starting from the isometry property, a geometric characterization of the target function given by the augmentation, we disentangle the effects of the model and the augmentation, and prove two generalization bounds that are free of model complexity. Our first bound works for an arbitrary encoder, where the prediction error is decomposed as the sum of an estimation error incurred by fitting a linear probe with RKHS regression, and an approximation error entailed by RKHS approximation. Our second bound specifically addresses the case where the encoder is near-optimal, that is it approximates the top-d eigenspace of the RKHS induced by the augmentation. A key ingredient in our analysis is the augmentation complexity, which we use to quantitatively compare different augmentations and analyze their impact on downstream performance.

We present a computational framework that transforms single images into 3D physical objects. The visual geometry of a physical object in an image is determined by three orthogonal attributes: mechanical properties, external forces, and rest-shape geometry. Existing single-view 3D reconstruction methods often overlook this underlying composition, presuming rigidity or neglecting external forces. Consequently, the reconstructed objects fail to withstand real-world physical forces, resulting in instability or undesirable deformation -- diverging from their intended designs as depicted in the image. Our optimization framework addresses this by embedding physical compatibility into the reconstruction process. We explicitly decompose the three physical attributes and link them through static equilibrium, which serves as a hard constraint, ensuring that the optimized physical shapes exhibit desired physical behaviors. Evaluations on a dataset collected from Objaverse demonstrate that our framework consistently enhances the physical realism of 3D models over existing methods. The utility of our framework extends to practical applications in dynamic simulations and 3D printing, where adherence to physical compatibility is paramount.

Given a set of dissimilarity measurements amongst data points, determining what metric representation is most "consistent" with the input measurements or the metric that best captures the relevant geometric features of the data is a key step in many machine learning algorithms. Existing methods are restricted to specific kinds of metrics or small problem sizes because of the large number of metric constraints in such problems. In this paper, we provide an active set algorithm, Project and Forget, that uses Bregman projections, to solve metric constrained problems with many (possibly exponentially) inequality constraints. We provide a theoretical analysis of Project and Forget and prove that our algorithm converges to the global optimal solution and that the L_2 distance of the current iterate to the optimal solution decays asymptotically at an exponential rate. We demonstrate that using our method we can solve large problem instances of three types of metric constrained problems: general weight correlation clustering, metric nearness, and metric learning; in each case, out-performing the state of the art methods with respect to CPU times and problem sizes.

Conformal symmetries, i.e.\ coordinate transformations that preserve angles, play a key role in many fields, including physics, mathematics, computer vision and (geometric) machine learning. Here we build a neural network that is equivariant under general conformal transformations. To achieve this, we lift data from flat Euclidean space to Anti de Sitter (AdS) space. This allows us to exploit a known correspondence between conformal transformations of flat space and isometric transformations on the AdS space. We then build upon the fact that such isometric transformations have been extensively studied on general geometries in the geometric deep learning literature. We employ message-passing layers conditioned on the proper distance, yielding a computationally efficient framework. We validate our model on tasks from computer vision and statistical physics, demonstrating strong performance, improved generalization capacities, and the ability to extract conformal data such as scaling dimensions from the trained network.

PGD adversarial training, the standard robustness method, can reduce Jacobian Frobenius norm yet worsen clean-input geometry (e.g., TDI 1.336 vs. ERM 1.093). We show this is not an implementation artifact but a theorem-level consequence of supervised learning. We prove that any encoder minimizing supervised loss must retain non-zero sensitivity along directions correlated with training labels, including directions that are nuisance at test time. This holds across proper scoring rules, architectures, and dataset sizes. We call this the geometric blind spot of supervised learning. This theorem unifies four empirical phenomena often treated separately: non-robust features, texture bias, corruption fragility, and the robustness-accuracy tradeoff. It also explains why suppressing sensitivity in one adversarial direction can redistribute sensitivity elsewhere. We introduce Trajectory Deviation Index (TDI), a diagnostic of geometric isotropy. Unlike CKA, intrinsic dimension, or Jacobian Frobenius norm alone, TDI captures the failure mode above. In our experiments, PGD attains low Frobenius norm but high TDI, while PMH attains the lowest TDI with one additional training term and no architectural changes. Across seven tasks, BERT/SST-2, and ImageNet ViT-B/16 (backbone family underlying CLIP/DINO/SAM), the blind spot is measurable and repairable. It appears at foundation-model scale, worsens with model scale and task-specific fine-tuning, and is substantially reduced by PMH. PMH also leads on non-Gaussian corruption types (blur/brightness/contrast) without corruption-specific training.

Differential geometric approaches to the analysis and processing of data in the form of symmetric positive definite (SPD) matrices have had notable successful applications to numerous fields including computer vision, medical imaging, and machine learning. The dominant geometric paradigm for such applications has consisted of a few Riemannian geometries associated with spectral computations that are costly at high scale and in high dimensions. We present a route to a scalable geometric framework for the analysis and processing of SPD-valued data based on the efficient computation of extreme generalized eigenvalues through the Hilbert and Thompson geometries of the semidefinite cone. We explore a particular geodesic space structure based on Thompson geometry in detail and establish several properties associated with this structure. Furthermore, we define a novel iterative mean of SPD matrices based on this geometry and prove its existence and uniqueness for a given finite collection of points. Finally, we state and prove a number of desirable properties that are satisfied by this mean.

A classical problem in convex and discrete geometry asks for the convex polyhedron of greatest volume whose vertices are chosen from the unit sphere S^2. For a prescribed number N of vertices, the problem is known only in a small number of cases. In this paper we resolve the next outstanding case, N=9. We prove that every convex polyhedron with at most nine vertices on S^2 has volume at most 32sqrt{3-3}, with equality, up to rotation, precisely for a triaugmented triangular prism of an explicitly determined shape. The proof combines combinatorial and geometric reductions with sharp volume estimates. By a theorem of Berman and Hanes (Mathematische Annalen, 1970), a volume maximizer must be simplicial, reducing the 2,606 combinatorial types of 9-vertex polyhedra to 50. We prove that a maximizer cannot have a trivalent vertex, leaving only five combinatorial types, which are treated using geometric and combinatorial arguments. In particular, we determine the exact maximizer within the triaugmented triangular prism class, and characterize the equality case.

It has been conjectured that the operator norm of the Lyapunov operator induced by the Frobenius norm is always attained at a symmetric matrix. The conjecture is known to hold for all matrices of order at most five. We give an integer matrix of order seven for which the skew-symmetric restricted norm is strictly larger than the symmetric restricted norm. A rational separator and exact-arithmetic certificates establish the strict inequality without relying on floating-point computations. A direct-sum construction yields counterexamples in every order n geq 7; the case n = 6 remains open.

We introduce a novel method for solving density-based topology optimization problems: Sigmoidal Mirror descent with a Projected Latent variable (SiMPL). The SiMPL method (pronounced as ``the simple method'') optimizes a design using only first-order derivative information of the objective function. The bound constraints on the density field are enforced with the help of the (negative) Fermi--Dirac entropy, which is also used to define a non-symmetric distance function called a Bregman divergence on the set of admissible designs. This Bregman divergence leads to a simple update rule that is further simplified with the help of a so-called latent variable. Because the SiMPL method involves discretizing the latent variable, it produces a sequence of pointwise-feasible iterates, even when high-order finite elements are used in the discretization. Numerical experiments demonstrate that the method outperforms other popular first-order optimization algorithms. To outline the general applicability of the technique, we include examples with (self-load) compliance minimization and compliant mechanism optimization problems.

Machine-learning generative methods for material design are constructed by representing a given chemical structure, either a solid or a molecule, over appropriate atomic features, generally called structural descriptors. These must be fully descriptive of the system, must facilitate the training process and must be invertible, so that one can extract the atomic configurations corresponding to the output of the model. In general, this last requirement is not automatically satisfied by the most efficient structural descriptors, namely the representation is not directly invertible. Such drawback severely limits our freedom of choice in selecting the most appropriate descriptors for the problem, and thus our flexibility to construct generative models. In this work, we present a general optimization method capable of inverting any local many-body descriptor of the chemical environment, back to a cartesian representation. The algorithm is then implemented together with the bispectrum representation of the local structure and demonstrated for a number of molecules. The scheme presented here, thus, represents a general approach to the inversion of structural descriptors, enabling the construction of efficient structural generative models.

Magnitude of a finite metric space and the related notion of magnitude functions on metric spaces is an active area of research in algebraic topology. Magnitude originally arose in the context of biology, where it represents the number of effective species in an environment; when applied to a one-parameter family of metric spaces tX with scale parameter t, the magnitude captures much of the underlying geometry of the space. Prior work has mostly focussed on properties of magnitude in a global sense; in this paper we restrict the sets to finite subsets of Euclidean space and investigate its individual components. We give an explicit formula for the corrected inclusion-exclusion principle, and define a quantity associated with each point, called the moment which gives an intrinsic ordering to the points. We exploit this in order to form an algorithm which approximates the convex hull.

Recent studies suggest that diffusion models can recover geometric structure in the data manifolds they are trained on, yet the supporting evidence has so far come mostly from natural-image data, where the underlying geometry itself is unknown. We study this question in a setting where the geometry is analytically tractable: constrained inverse kinematics (IK). Each task-space constraint defines a configuration-space manifold with known intrinsic dimension, giving direct ground truth for evaluating the geometry learned by the model. For each of the 6-DoF UR5 and 7-DoF Franka, we train a single conditional diffusion model across seven constraint families, spanning solution manifolds from discrete IK branches to self-motion manifolds. Our empirical results reveal that the intrinsic dimension recovered from the model's score function matches the analytical degrees of freedom of the corresponding constraint manifold across both robots. Moreover, linear interpolation in the latent space leads to generated solutions that remain close to the appropriate constraint manifold, indicating that the learned representation further captures geometric structure of the constraint family beyond intrinsic dimension alone. Constrained IK therefore offers a controlled setting for studying the intrinsic geometry learned by diffusion models.

The Distance Geometry Problem (DGP) seeks to find positions for a set of points in geometric space when some distances between pairs of these points are known. The so-called discretization assumptions allow to discretize the search space of DGP instances. In this paper, we study the Discretizable Molecular Distance Geometry Problem whose feasible solutions provide a discretization scheme for the DGP. We propose the first constraint programming formulations as well as a set of checks for proving infeasibility, domain reduction techniques, symmetry breaking constraints and valid inequalities. Our computational results indicate that our formulations outperform the state-of-the-art integer programming formulations, both for feasible and infeasible instances.

For any integer d geq 2 and prime power q, we construct unexpectedly large induced matchings in the point-line incidence graph of F_{q}^{d} by leveraging a new connection with the Furstenberg-Sárközy problem from arithmetic combinatorics. In particular, we significantly improve the previously well-known baselines when q is prime, showing that F_{q}^{2} contains matchings of size q^{1.233} and F_{q}^{d} contains matchings of size q^{d-o_{d}(1)}. These results and their proofs have several applications. First, we also obtain new constructions for finite field Nikodym sets in dimension d geq 2, improving recent results of Tao by polynomial factors. For example, when q is prime, we show the existence of Nikodym sets in F_q^d of size q^d - q^{d - o_d(1)}. Second, we construct a new minimal blocking set in PG(2,q), solving a longstanding problem in finite geometry. Third, we obtain new constructions for the minimal distance problem (in R^{2} and also in higher dimensions), improving a recent result of Logunov-Zakharov. We also obtain analogous results for general finite fields with large characteristics. In particular, in one of our constructions we introduce a new special set of points inside the norm hypersurface in F_{q}^{d}, which directly generalizes the classical Hermitian unital and which may be of independent interest for applications.

Isogenies occur throughout the theory of elliptic curves. Recently, the cryptographic protocols based on isogenies are considered as candidates of quantum-resistant cryptographic protocols. Given two elliptic curves E_1, E_2 defined over a finite field k with the same trace, there is a nonconstant isogeny beta from E_2 to E_1 defined over k. This study gives out the index of Hom_{it k}(it E_{rm 1},E_{rm 2})beta as a left ideal in End_{it k}(it E_{rm 2}) and figures out the correspondence between isogenies and kernel ideals. In addition, some results about the non-trivial minimal degree of isogenies between the two elliptic curves are also provided.

Given two homogeneous spaces of the form G_1/K and G_2/K, where G_1 and G_2 are compact simple Lie groups, we study the existence problem for G_1xG_2-invariant Einstein metrics on the homogeneous space M=G_1xG_2/K. For the large subclass C of spaces having three pairwise inequivalent isotropy irreducible summands (12 infinite families and 70 sporadic examples), we obtain that existence is equivalent to the existence of a real root for certain quartic polynomial depending on the dimensions and two Killing constants, which allows a full classification and the possibility to weigh the existence and non-existence pieces of C.

This is the second paper devoted to the numerical version of Signature-inverse Theorem in terms of the underlying joint invariants. Signature Theorem and its Inverse guarantee any application of differential invariant signature curves to the invariant recognition of visual objects. We first show the invalidity of Curvature-inverse and Signature inverse theorems, meaning non-congruent meshes may have the same joint invariant numerical curvature or signature. Then by classifying three and five point ordinary meshes respectively in the Euclidean and affine cases, we look for conditions in terms of the associated joint invariant signatures which make these theorems correct. Additionally, we bring forward The Host Theorem to provide a simpler version of Signature-inverse Theorem for closed ordinary meshes.

Sparse-view computed tomography (CT) reduces radiation dose and acquisition time and may mitigate motion artifacts. However, angular undersampling provides insufficient information to determine the image uniquely and stably. Limited-angle CT, arising from restricted angular coverage, produces strongly directional information loss associated with the missing angular range. In both settings, image directions may be strongly observed, weakly constrained, or unobservable, leading to severe ill-posedness and reconstruction ambiguity. Existing diffusion-based approaches incorporate measurement information through likelihood guidance, data-consistency operations, or range-null-space corrections. However, they do not generally use the continuously varying measurement sensitivity of the acquisition to jointly shape both reconstruction updates and stochastic exploration. We propose a geometry-aware diffusion-guided stochastic reconstruction framework for sparse-view and limited-angle CT. Its central component is a regularized noise-weighted pullback metric constructed from the CT forward operator and measurement-noise covariance. This metric continuously adapts both the measurement-aware update and stochastic exploration according to directional measurement sensitivity, suppressing changes along strongly constrained directions while permitting greater exploration along weakly constrained and unobservable directions. We complement this geometry-aware update with a regularized data-consistency correction and approximately null-space-restricted stochastic perturbations, implemented matrix-free using forward and backprojection operations together with conjugate-gradient solves. Experiments on sparse-view, noisy, and limited-angle CT demonstrate competitive reconstruction quality, strong measurement consistency, and spatially resolved empirical uncertainty estimates.

We consider four dimensional CHL models with sixteen spacetime supersymmetries obtained from orbifolds of type IIA superstring on K3 x T^2 by a Z_N symmetry acting (possibly) non-geometrically on K3. We show that most of these models (in particular, for geometric symmetries) are self-dual under a weak-strong duality acting on the heterotic axio-dilaton modulus S by a "Fricke involution" S --> -1/NS. This is a novel symmetry of CHL models that lies outside of the standard SL(2,Z)-symmetry of the parent theory, heterotic strings on T^6. For self-dual models this implies that the lattice of purely electric charges is N-modular, i.e. isometric to its dual up to a rescaling of its quadratic form by N. We verify this prediction by determining the lattices of electric and magnetic charges in all relevant examples. We also calculate certain BPS-saturated couplings and verify that they are invariant under the Fricke S-duality. For CHL models that are not self-dual, the strong coupling limit is dual to type IIA compactified on T^6/Z_N, for some Z_N-symmetry preserving half of the spacetime supersymmetries.

In deep metric learning, the Triplet Loss has emerged as a popular method to learn many computer vision and natural language processing tasks such as facial recognition, object detection, and visual-semantic embeddings. One issue that plagues the Triplet Loss is network collapse, an undesirable phenomenon where the network projects the embeddings of all data onto a single point. Researchers predominately solve this problem by using triplet mining strategies. While hard negative mining is the most effective of these strategies, existing formulations lack strong theoretical justification for their empirical success. In this paper, we utilize the mathematical theory of isometric approximation to show an equivalence between the Triplet Loss sampled by hard negative mining and an optimization problem that minimizes a Hausdorff-like distance between the neural network and its ideal counterpart function. This provides the theoretical justifications for hard negative mining's empirical efficacy. In addition, our novel application of the isometric approximation theorem provides the groundwork for future forms of hard negative mining that avoid network collapse. Our theory can also be extended to analyze other Euclidean space-based metric learning methods like Ladder Loss or Contrastive Learning.

For non-rigid objects, predicting the 3D shape from 2D keypoint observations is ill-posed due to occlusions, and the need to disentangle changes in viewpoint and changes in shape. This challenge has often been addressed by embedding low-rank constraints into specialized models. These models can be hard to train, as they depend on finding a canonical way of aligning observations, before they can learn detailed geometry. These constraints have limited the reconstruction quality. We show that generic, high capacity models, trained with an unsupervised loss, allow for more accurate predicted shapes. In particular, applying low-rank constraints to localized subsets of the full shape allows the high capacity to be suitably constrained. We reduce the state-of-the-art reconstruction error on the S-Up3D dataset by over 70%.

Critical Lagrange multipliers are known to be responsible for the potentially slow convergence of Newton-type methods, and noncriticality of a given multiplier has been tied to an error bound which estimates the distance of a primal-dual pair associated with a perturbed problem to the primal solution and the multiplier set of the unperturbed one, and is decisive for a local convergence analysis. We investigate this relation in an abstract setting where merely a set-valued mapping assigning primal-dual pairs to a parameter is available, and characterize the error bound of interest in terms of noncriticality of the underlying multiplier and two calmness-type properties of the associated multiplier mapping, one of which is a novel weak inner calmness in the fuzzy sense. No structural assumptions on the underlying problem are needed for that, and the two calmness-type conditions are not only sufficient but also necessary. Afterwards, we specify these findings for composite optimization problems. Whenever the subdifferential of the outer function is a polyhedral mapping, both conditions hold automatically, which explains the equivalence of noncriticality and the error bound observed in the polyhedral setting. Whenever the outer function is C^2-decomposable, they are secured by calmness of a restricted multiplier mapping together with a closedness condition, which recovers and extends the known characterization for C^2-cone reducible constraint systems.

Given a finite poset mathcal P, the hypercube-height, denoted by h^*(mathcal P), is defined to be the largest h such that, for any natural number n, the subsets of [n] of size less than h do not contain an induced copy of mathcal P. The hypercube-width, denoted by w^*(mathcal P), is the smallest w such that the subsets of [w] of size at most h^*(mathcal P) contain an induced copy of mathcal P. In other words, h^*(mathcal P) asks how `low' can a poset be embedded, and w^*(mathcal P) asks for the first hypercube in which such an `optimal' embedding occurs. These notions were introduced by Bastide, Groenland, Ivan and Johnston in connection to upper bounds for the poset saturation numbers. While it is not hard to see that h^*(mathcal P)leq |mathcal P|-1 (and this bound can be tight), the hypercube-width has proved to be much more elusive. It was shown by the authors mentioned above that w^*(mathcal P)leq|mathcal P|^2/4, but they conjectured that in fact w^*(mathcal P)leq |mathcal P| for any finite poset mathcal P. In this paper we prove this conjecture. The proof uses Hall's theorem for bipartite graphs as a precision tool for modifing an existing copy of our poset.

We explicitly construct a pair of immersed tori in three dimensional Euclidean space that are related by a mean curvature preserving isometry. These Bonnet pair tori are the first examples of compact Bonnet pairs. This resolves a longstanding open problem on whether the metric and mean curvature function determine a unique smooth compact immersion. Moreover, we prove these isometric tori are real analytic. This resolves a second longstanding open problem on whether real analyticity of the metric already determines a unique compact immersion. Our construction uses the relationship between Bonnet pairs and isothermic surfaces. The Bonnet pair tori arise as conformal transformations of an isothermic torus with one family of planar curvature lines. We classify such isothermic tori in our companion paper (arXiv:2312.14956). The above approach stems from computational investigations of a 5x7 quad decomposition of a torus using a discrete differential geometric analog of isothermic surfaces and Bonnet pairs.

We investigate the first-order differential calculus over extended metric-topological measure spaces. The latter are quartets mathbb X=(X,τ,{sf d},mathfrak m), given by an extended metric space (X,{sf d}) together with a weaker topology τ (satisfying suitable compatibility conditions) and a finite Radon measure mathfrak m on (X,τ). The class of extended metric-topological measure spaces encompasses all metric measure spaces and many infinite-dimensional metric-measure structures, such as abstract Wiener spaces. In this framework, we study the following classes of objects: - The Banach algebra {rm Lip}_b(X,τ,{sf d}) of bounded τ-continuous {sf d}-Lipschitz functions on X. - Several notions of Lipschitz derivations on X, defined in duality with {rm Lip}_b(X,τ,{sf d}). - The metric Sobolev space W^{1,p}(mathbb X), defined in duality with Lipschitz derivations on X. Inter alia, we generalise both Weaver's and Di Marino's theories of Lipschitz derivations to the extended setting, and we discuss their connections. We also introduce a Sobolev space W^{1,p}(mathbb X) via an integration-by-parts formula, along the lines of Di Marino's notion of Sobolev space, and we prove its equivalence with other approaches, studied in the extended setting by Ambrosio, Erbar and Savaré. En route, we obtain some results of independent interest, among which are: - A Lipschitz-constant-preserving extension result for τ-continuous {sf d}-Lipschitz functions. - A novel and rather robust strategy for proving the equivalence of Sobolev-type spaces defined via an integration-by-parts formula and those obtained with a relaxation procedure. - A new description of an isometric predual of the metric Sobolev space W^{1,p}(mathbb X).

Model attribution is a critical component of deep neural networks (DNNs) for its interpretability to complex models. Recent studies bring up attention to the security of attribution methods as they are vulnerable to attribution attacks that generate similar images with dramatically different attributions. Existing works have been investigating empirically improving the robustness of DNNs against those attacks; however, none of them explicitly quantifies the actual deviations of attributions. In this work, for the first time, a constrained optimization problem is formulated to derive an upper bound that measures the largest dissimilarity of attributions after the samples are perturbed by any noises within a certain region while the classification results remain the same. Based on the formulation, different practical approaches are introduced to bound the attributions above using Euclidean distance and cosine similarity under both ell_2 and ell_infty-norm perturbations constraints. The bounds developed by our theoretical study are validated on various datasets and two different types of attacks (PGD attack and IFIA attribution attack). Over 10 million attacks in the experiments indicate that the proposed upper bounds effectively quantify the robustness of models based on the worst-case attribution dissimilarities.

Emerging from low-level vision theory, steerable filters found their counterpart in prior work on steerable convolutional neural networks equivariant to rigid transformations. In our work, we propose a steerable feed-forward learning-based approach that consists of neurons with spherical decision surfaces and operates on point clouds. Such spherical neurons are obtained by conformal embedding of Euclidean space and have recently been revisited in the context of learning representations of point sets. Focusing on 3D geometry, we exploit the isometry property of spherical neurons and derive a 3D steerability constraint. After training spherical neurons to classify point clouds in a canonical orientation, we use a tetrahedron basis to quadruplicate the neurons and construct rotation-equivariant spherical filter banks. We then apply the derived constraint to interpolate the filter bank outputs and, thus, obtain a rotation-invariant network. Finally, we use a synthetic point set and real-world 3D skeleton data to verify our theoretical findings. The code is available at https://github.com/pavlo-melnyk/steerable-3d-neurons.

We generalize quasi-arithmetic means beyond scalars by considering the gradient map of a Legendre type real-valued function. The gradient map of a Legendre type function is proven strictly comonotone with a global inverse. It thus yields a generalization of strictly mononotone and differentiable functions generating scalar quasi-arithmetic means. Furthermore, the Legendre transformation gives rise to pairs of dual quasi-arithmetic averages via the convex duality. We study the invariance and equivariance properties under affine transformations of quasi-arithmetic averages via the lens of dually flat spaces of information geometry. We show how these quasi-arithmetic averages are used to express points on dual geodesics and sided barycenters in the dual affine coordinate systems. We then consider quasi-arithmetic mixtures and describe several parametric and non-parametric statistical models which are closed under the quasi-arithmetic mixture operation.

Let V be a highest weight module over a Kac-Moody algebra g, and let conv V denote the convex hull of its weights. We determine the combinatorial isomorphism type of conv V, i.e. we completely classify the faces and their inclusions. In the special case where g is semisimple, this brings closure to a question studied by Cellini-Marietti [IMRN 2015] for the adjoint representation, and by Khare [J. Algebra 2016; Trans. Amer. Math. Soc. 2017] for most modules. The determination of faces of finite-dimensional modules up to the Weyl group action and some of their inclusions also appears in previous work of Satake [Ann. of Math. 1960], Borel-Tits [IHES Publ. Math. 1965], Vinberg [Izv. Akad. Nauk 1990], and Casselman [Austral. Math. Soc. 1997]. For any subset of the simple roots, we introduce a remarkable convex cone which we call the universal Weyl polyhedron, which controls the convex hulls of all modules parabolically induced from the corresponding Levi factor. Namely, the combinatorial isomorphism type of the cone stores the classification of faces for all such highest weight modules, as well as how faces degenerate as the highest weight gets increasingly singular. To our knowledge, this cone is new in finite and infinite type. We further answer a question of Michel Brion, by showing that the localization of conv V along a face is always the convex hull of the weights of a parabolically induced module. Finally, as we determine the inclusion relations between faces representation-theoretically from the set of weights, without recourse to convexity, we answer a similar question for highest weight modules over symmetrizable quantum groups.

The shadow of an abstract simplicial complex K with vertices in R^N is a subset of R^N defined as the union of the convex hulls of simplices of K. The Vietoris--Rips complex of a metric space (S,d) at scale β is an abstract simplicial complex whose each k-simplex corresponds to (k+1) points of S within diameter β. In case Ssubsetmathbb R^2 and d(a,b)=|a-b| the standard Euclidean metric, the natural shadow projection of the Vietoris--Rips complex is already proved by Chambers et al. to induce isomorphisms on π_0 and π_1. We extend the result beyond the standard Euclidean distance on Ssubsetmathbb R^N to a family of path-based metrics, d^varepsilon_{S}. From the pairwise Euclidean distances of points in S, we introduce a family (parametrized by varepsilon) of path-based Vietoris--Rips complexes R^varepsilon_β(S) for a scale β>0. If SsubsetR^2 is Hausdorff-close to a planar Euclidean graph G, we provide quantitative bounds on scales β,varepsilon for the shadow projection map of the Vietoris--Rips complex of (S,d^varepsilon_S) at scale β to induce π_1-isomorphism. This paper first studies the homotopy-type recovery of Gsubsetmathbb R^N using the abstract Vietoris--Rips complex of a Hausdorff-close sample S under the d^varepsilon_S metric. Then, our result on the π_1-isomorphism induced by the shadow projection lends itself to providing also a geometrically close embedding for the reconstruction. Based on the length of the shortest loop and large-scale distortion of the embedding of G, we quantify the choice of a suitable sample density varepsilon and a scale β at which the shadow of R^varepsilon_β(S) is homotopy-equivalent and Hausdorff-close to G.

We rigorously state the connection between the EHZ-capacity of convex Lagrangian products Ktimes TsubsetR^ntimesR^n and the minimal length of closed (K,T)-Minkowski billiard trajectories. This connection was made explicit for the first time by Artstein-Avidan and Ostrover under the assumption of smoothness and strict convexity of both K and T. We prove this connection in its full generality, i.e., without requiring any conditions on the convex bodies K and T. This prepares the computation of the EHZ-capacity of convex Lagrangian products of two convex polytopes by using discrete computational methods.

Generating novel crystalline materials has the potential to lead to advancements in fields such as electronics, energy storage, and catalysis. The defining characteristic of crystals is their symmetry, which plays a central role in determining their physical properties. However, existing crystal generation methods either fail to generate materials that display the symmetries of real-world crystals, or simply replicate the symmetry information from examples in a database. To address this limitation, we propose SymmCD, a novel diffusion-based generative model that explicitly incorporates crystallographic symmetry into the generative process. We decompose crystals into two components and learn their joint distribution through diffusion: 1) the asymmetric unit, the smallest subset of the crystal which can generate the whole crystal through symmetry transformations, and; 2) the symmetry transformations needed to be applied to each atom in the asymmetric unit. We also use a novel and interpretable representation for these transformations, enabling generalization across different crystallographic symmetry groups. We showcase the competitive performance of SymmCD on a subset of the Materials Project, obtaining diverse and valid crystals with realistic symmetries and predicted properties.

In this paper we show that bisymmetry, which is an algebraic property, has a regularity improving feature. More precisely, we prove that every bisymmetric, partially strictly monotonic, reflexive and symmetric function F:I^2to I is continuous. As a consequence, we obtain a finer characterization of quasi-arithmetic means than the classical results of Aczél, Kolmogoroff, Nagumo and de Finetti.

We study a class of Z^{d}-substitutive subshifts, including a large family of constant-length substitutions, and homomorphisms between them, i.e., factors modulo isomorphisms of Z^{d}. We prove that any measurable factor map and even any homomorphism associated to a matrix commuting with the expansion matrix, induces a continuous one. We also get strong restrictions on the normalizer group, proving that any endomorphism is invertible, the normalizer group is virtually generated by the shift action and the quotient of the normalizer group by the automorphisms is restricted by the digit tile of the substitution.

Why does the low dimensionality of representations, typically dapprox 1000, not prevent modern embedding-based retrieval models from scaling to billions, or even trillions, of data points? To answer this question, we study maximal-margin embeddings in the following retrieval model, classically studied in communication complexity [PS86] and more recently in embedding-based retrieval [WBNL26]. Let Ain {0,1}^{Ntimes n} be a matrix indicating whether each of N queries is relevant to each of n documents. We are interested in the largest margin m>0, denoted by m^{rd}(d, A), for which there exist unit norm embeddings of the queries and documents {U_j}_{j = 1}^N, {V_i}_{i = 1}^n with the following property. langle U_j, V_irangle ge m whenever A_{ji} = 1 and langle U_j, V_irangle le -m otherwise. A large margin is a key proxy for representation quality: it controls both robustness to perturbations and compositional generalization across queries. Our main theorem establishes that the best possible margin without a restriction on the dimension, m^{rd}(+infty, A), can be nearly achieved in dimension d = O(m^{rd}(+infty, A)^{-2}log n) which improves a theorem of [BDES02]. Together with a matching lower bound in Theorem 1.5, we conclude that when Ain {0,1}^{n{k}times n} is the matrix containing all possible k-sparse rows once, dimension d = O(klog (n/k)) is necessary and sufficient for the maximal possible margin m^{rd}(+infty, A) = Θ(k^{-1/2}) in this setting. This fully resolves the setup of [WBNL26]. We also give several constructions for large margins when d = o(klog (n/k)). Finally, we empirically test the InfoNCE and sigmoid losses for producing large margin embeddings and demonstrate a clear advantage of the sigmoid loss.

We study Forman--Ricci and effective resistance curvatures on the skeleta of convex polytopes. Our guiding questions are: how frequently do polytopal graphs exhibit everywhere positive curvature, and what structural constraints does positivity impose? For Forman--Ricci curvature we derive an exact identity for the average edge curvature in terms of flag f-numbers and establish the existence of infinite families of Forman--Ricci-positive polytopes in every fixed dimension dge 6. We prove finiteness results in low dimension: there are only finitely many Forman--Ricci-positive 3- and 4-polytopes; for d=5 we show finiteness in the simplicial case, and conjecture its extension to 5-polytopes more generally. For the resistance curvature κ(v) we establish the existence of infinite families for all dge 3, and we provide a quantitative lower bound for κ(v) in a simple 3-polytope in terms of the lengths of the three 2-faces incident to v. This bound leads to constructions of non-vertex-transitive, resistance-positive 3-polytopes via Δ-operations, and a degree-based obstruction showing that if each neighbor of v has degree at most d_v-2, then κ(v)le 0. Our results suggest that positive curvature on polytopal skeletons is rare and constrained.

The latent space of diffusion model mostly still remains unexplored, despite its great success and potential in the field of generative modeling. In fact, the latent space of existing diffusion models are entangled, with a distorted mapping from its latent space to image space. To tackle this problem, we present Isometric Diffusion, equipping a diffusion model with a geometric regularizer to guide the model to learn a geometrically sound latent space of the training data manifold. This approach allows diffusion models to learn a more disentangled latent space, which enables smoother interpolation, more accurate inversion, and more precise control over attributes directly in the latent space. Our extensive experiments consisting of image interpolations, image inversions, and linear editing show the effectiveness of our method.

In machine learning, there is a long history of trying to build neural networks that can learn from fewer example data by baking in strong geometric priors. However, it is not always clear a priori what geometric constraints are appropriate for a given task. Here, we explore the possibility that one can uncover useful geometric inductive biases by studying how training molds the Riemannian geometry induced by unconstrained neural network feature maps. We first show that at infinite width, neural networks with random parameters induce highly symmetric metrics on input space. This symmetry is broken by feature learning: networks trained to perform classification tasks learn to magnify local areas along decision boundaries. This holds in deep networks trained on high-dimensional image classification tasks, and even in self-supervised representation learning. These results begin to elucidate how training shapes the geometry induced by unconstrained neural network feature maps, laying the groundwork for an understanding of this richly nonlinear form of feature learning.

We analyse the boundary behaviour of the gradient of the torsion function w_Om in convex domains OmsubsetR^d. We prove that its L^infty-norm is attained at a boundary point and establish the stability of this norm under general (convex) perturbations. For problems of the form $sup{|nabla w_{Om}|_infty: Om subset R^d,open, bounded and convex, G(Om)=m}, where G is either volume or perimeter, we show the existence of maximisers which are C^1-smooth, rotationally symmetric about an axis and contain a (d-1)$- dimensional ball (of estimated size) in their boundary. Other constraints, whether geometric (such as diameter or circumradius) or variational (such as torsion or first Dirichlet eigenvalue), are also briefly discussed, and some of their characteristic behaviours are highlighted.

In statistics, independent, identically distributed random samples do not carry a natural ordering, and their statistics are typically invariant with respect to permutations of their order. Thus, an n-sample in a space M can be considered as an element of the quotient space of M^n modulo the permutation group. The present paper takes this definition of sample space and the related concept of orbit types as a starting point for developing a geometric perspective on statistics. We aim at deriving a general mathematical setting for studying the behavior of empirical and population means in spaces ranging from smooth Riemannian manifolds to general stratified spaces. We fully describe the orbifold and path-metric structure of the sample space when M is a manifold or path-metric space, respectively. These results are non-trivial even when M is Euclidean. We show that the infinite sample space exists in a Gromov-Hausdorff type sense and coincides with the Wasserstein space of probability distributions on M. We exhibit Fr\'echet means and k-means as metric projections onto 1-skeleta or k-skeleta in Wasserstein space, and we define a new and more general notion of polymeans. This geometric characterization via metric projections applies equally to sample and population means, and we use it to establish asymptotic properties of polymeans such as consistency and asymptotic normality.

We study a variant of the equidistribution of mass conjecture on the sphere posed by Böcherer, Sarnak, and Schulze-Pillot: quantum unique ergodicity in shrinking sets. Conditionally on the generalized Lindelöf hypothesis, we show that quantum unique ergodicity holds on every shrinking spherical cap whose radius is considerably larger than the Planck scale, and that it holds on almost every shrinking spherical cap whose radius is larger than the Planck scale. Additionally, conditionally on GLH, we provide explicit upper bounds for the 1-Wasserstein distance and the spherical cap discrepancy between the involved measures.

Let 1 le k le n, and let v_1,ldots,v_k be integral vectors in Z^n. We consider the wedge map α_{n,k} : (Z^n)^k /SL_k(Z) rightarrow wedge^k(Z^n), (v_1,ldots,v_k) rightarrow v_1 wedge cdots wedge v_k . In his Disquisitiones, Gauss proved that α_{n,2} is injective when restricted to a primitive system of vectors when defining his composition law for binary quadratic forms. He also gave an algorithm for inverting α_{3,2} in a different context on the representation of integers by ternary quadratic forms. We give here an explicit algorithm for inverting α_{n,2}, and observe via Bhargava's composition law for Z^2 otimes Z^2 otimes Z^2 cube that inverting α_{4,2} is the main algorithmic step in Gauss's composition law for binary quadratic forms. This places Gauss's composition as a special case of the geometric problem of inverting a wedge map which may be of independent interests. We also show that a given symmetric positive definite matrix A induces a natural metric on the integral Grassmannian G_{n,k}(Z) so that the map X rightarrow X^TAX becomes norm preserving.

Firm characteristics are commonly represented as fixed vectors, even though evidence about firms' operations arrives as heterogeneous collections of articles reports. We study how distances between distributions of firm characteristics restrict systematic covariance. For given latent exposure laws, quadratic Wasserstein geometry yields sharp covariance endpoints over admissible couplings. Under a common randomized bi-Lipschitz characteristic-to-exposure map, bounded risk-coordinate slack, and a maintained return-covariance bridge, characteristic-side distance yields a conditional interval for the covariance ceiling. Greater separation then leaves less scope for aligned systematic exposures when these assumptions are tight, while a non-negative transport excess term records the gap between realized and maximum-covariance arrangements. The resulting envelope is scenario analysis rather than an expected-return, no-arbitrage, or identified structural model. Empirically, we proxy characteristic distributions with encoder-only language-model embeddings of financial news articles, disclosures, and analyst reports for Nasdaq firms over 2018-2022. In a dyadic regression with symmetric firm effects, greater pairwise article-embedding W2 distance is associated with weaker return co-movement: the coefficient is 1.920, with 95% interval [1.412, 2.468]. The estimate retains the same sign when returns are measured in a later window, although the feature construction is not point-in-time and the evidence remains reduced form.

This paper develops a hierarchical clustering algorithm for weighted projective spaces P_{q}, utilizing a Finsler metric d_F([z], [w]) and its rational analogue d_{F,Q}([z], [w]) to define distances that preserve the non-Euclidean geometry of these quotient manifolds. Defined via geodesic integrals of a scaling invariant Finsler norm weighted by the grades q = (q_0, q_1, dots, q_n), these metrics satisfy true metric properties including the triangle inequality, overcoming the limitations of the non-metric dissimilarity measure from prior work.

Unrestricted adversarial attacks aim to fool computer vision models without being constrained by ell_p-norm bounds to remain imperceptible to humans, for example, by changing an object's color. This allows attackers to circumvent traditional, norm-bounded defense strategies such as adversarial training or certified defense strategies. However, due to their unrestricted nature, there are also no guarantees of norm-based imperceptibility, necessitating human evaluations to verify just how authentic these adversarial examples look. While some related work assesses this vital quality of adversarial attacks, none provide statistically significant insights. This issue necessitates a unified framework that supports and streamlines such an assessment for evaluating and comparing unrestricted attacks. To close this gap, we introduce SCOOTER - an open-source, statistically powered framework for evaluating unrestricted adversarial examples. Our contributions are: (i) best-practice guidelines for crowd-study power, compensation, and Likert equivalence bounds to measure imperceptibility; (ii) the first large-scale human vs. model comparison across 346 human participants showing that three color-space attacks and three diffusion-based attacks fail to produce imperceptible images. Furthermore, we found that GPT-4o can serve as a preliminary test for imperceptibility, but it only consistently detects adversarial examples for four out of six tested attacks; (iii) open-source software tools, including a browser-based task template to collect annotations and analysis scripts in Python and R; (iv) an ImageNet-derived benchmark dataset containing 3K real images, 7K adversarial examples, and over 34K human ratings. Our findings demonstrate that automated vision systems do not align with human perception, reinforcing the need for a ground-truth SCOOTER benchmark.

Given a semisimple complex linear algebraic group G and a lower ideal I in positive roots of G, three objects arise: the ideal arrangement A_I, the regular nilpotent Hessenberg variety Hess(N,I), and the regular semisimple Hessenberg variety Hess(S,I). We show that a certain graded ring derived from the logarithmic derivation module of A_I is isomorphic to H^*(Hess(N,I)) and H^*(Hess(S,I))^W, the invariants in H^*(Hess(S,I)) under an action of the Weyl group W of G. This isomorphism is shown for general Lie type, and generalizes Borel's celebrated theorem showing that the coinvariant algebra of W is isomorphic to the cohomology ring of the flag variety G/B. This surprising connection between Hessenberg varieties and hyperplane arrangements enables us to produce a number of interesting consequences. For instance, the surjectivity of the restriction map H^*(G/B)to H^*(Hess(N,I)) announced by Dale Peterson and an affirmative answer to a conjecture of Sommers-Tymoczko are immediate consequences. We also give an explicit ring presentation of H^*(Hess(N,I)) in types B, C, and G. Such a presentation was already known in type A or when Hess(N,I) is the Peterson variety. Moreover, we find the volume polynomial of Hess(N,I) and see that the hard Lefschetz property and the Hodge-Riemann relations hold for Hess(N,I), despite the fact that it is a singular variety in general.

Leggett and Garg derived inequalities that probe the boundaries of classical and quantum physics by putting limits on the properties that classical objects can have. Historically, it has been suggested that Leggett-Garg inequalities are easily violated by quantum systems undergoing sequences of strong measurements, casting doubt on whether quantum mechanics correctly describes macroscopic objects. Here I show that Leggett-Garg inequalities cannot be violated by any projective measurement. The perceived violation of the inequalities found previously can be traced back to an inappropriate assumption of non-invasive measurability. Surprisingly, weak projective measurements cannot violate the Leggett-Garg inequalities either because even though the quantum system itself is not fully projected via weak measurements, the measurement devices are.

Let T be a rooted and weighted tree, where the weight of any node is equal to the sum of the weights of its children. The popular Treemap algorithm visualizes such a tree as a hierarchical partition of a square into rectangles, where the area of the rectangle corresponding to any node in T is equal to the weight of that node. The aspect ratio of the rectangles in such a rectangular partition necessarily depends on the weights and can become arbitrarily high. We introduce a new hierarchical partition scheme, called a polygonal partition, which uses convex polygons rather than just rectangles. We present two methods for constructing polygonal partitions, both having guarantees on the worst-case aspect ratio of the constructed polygons; in particular, both methods guarantee a bound on the aspect ratio that is independent of the weights of the nodes. We also consider rectangular partitions with slack, where the areas of the rectangles may differ slightly from the weights of the corresponding nodes. We show that this makes it possible to obtain partitions with constant aspect ratio. This result generalizes to hyper-rectangular partitions in R^d. We use these partitions with slack for embedding ultrametrics into d-dimensional Euclidean space: we give a rm polylog(Delta)-approximation algorithm for embedding n-point ultrametrics into R^d with minimum distortion, where Delta denotes the spread of the metric, i.e., the ratio between the largest and the smallest distance between two points. The previously best-known approximation ratio for this problem was polynomial in n. This is the first algorithm for embedding a non-trivial family of weighted-graph metrics into a space of constant dimension that achieves polylogarithmic approximation ratio.

We present a constructive lower bound of Ω(1/varepsilon) for Frank-Wolfe (FW) when both the objective and the constraint set are smooth and strongly convex, showing that the known uniform O(1/varepsilon) guarantees in this regime are tight. It is known that under additional assumptions on the position of the optimizer, FW can converge linearly. However, it remained unclear whether strong convexity of the set can yield rates uniformly faster than O(1/varepsilon), i.e., irrespective of the position of the optimizer. To investigate this question, we focus on a simple yet representative problem class: minimizing a strongly convex quadratic over the Euclidean unit ball, with the optimizer on the boundary. We analyze the dynamics of FW for this problem in detail and develop a novel computational approach to construct worst-case FW trajectories, which is of independent interest. Guided by these constructions, we develop an analytical proof establishing the lower bound.

A new information theoretic condition is presented for reconstructing a discrete random variable X based on the knowledge of a set of discrete functions of X. The reconstruction condition is derived from Shannon's 1953 lattice theory with two entropic metrics of Shannon and Rajski. Because such a theoretical material is relatively unknown and appears quite dispersed in different references, we first provide a synthetic description (with complete proofs) of its concepts, such as total, common and complementary informations. Definitions and properties of the two entropic metrics are also fully detailed and shown compatible with the lattice structure. A new geometric interpretation of such a lattice structure is then investigated that leads to a necessary (and sometimes sufficient) condition for reconstructing the discrete random variable X given a set { X_1,ldots,X_{n} } of elements in the lattice generated by X. Finally, this condition is illustrated in five specific examples of perfect reconstruction problems: reconstruction of a symmetric random variable from the knowledge of its sign and absolute value, reconstruction of a word from a set of linear combinations, reconstruction of an integer from its prime signature (fundamental theorem of arithmetic) and from its remainders modulo a set of coprime integers (Chinese remainder theorem), and reconstruction of the sorting permutation of a list from a minimal set of pairwise comparisons.

Moment restrictions and their conditional counterparts emerge in many areas of machine learning and statistics ranging from causal inference to reinforcement learning. Estimators for these tasks, generally called methods of moments, include the prominent generalized method of moments (GMM) which has recently gained attention in causal inference. GMM is a special case of the broader family of empirical likelihood estimators which are based on approximating a population distribution by means of minimizing a varphi-divergence to an empirical distribution. However, the use of varphi-divergences effectively limits the candidate distributions to reweightings of the data samples. We lift this long-standing limitation and provide a method of moments that goes beyond data reweighting. This is achieved by defining an empirical likelihood estimator based on maximum mean discrepancy which we term the kernel method of moments (KMM). We provide a variant of our estimator for conditional moment restrictions and show that it is asymptotically first-order optimal for such problems. Finally, we show that our method achieves competitive performance on several conditional moment restriction tasks.

This article presents a Monte Carlo study on bond percolation in distorted square and triangular lattices. The distorted lattices are generated by dislocating the sites from their regular positions. The amount and direction of the dislocations are random, but can be tuned by the distortion parameter α. Once the sites are dislocated, the bond lengths δ between the nearest neighbors change. A bond can only be occupied if its bond length is less than a threshold value called the connection threshold d. It is observed that when the connection threshold is greater than the lattice constant (assumed to be 1), the bond percolation threshold p_b always increases with distortion. For dle 1, no spanning configuration is found for the square lattice when the lattice is distorted, even very slightly. On the other hand, the triangular lattice not only spans for dle 1, it also shows a decreasing trend for p_b in the low-α range. These variation patterns have been linked with the average coordination numbers of the distorted lattices. A critical value d_c for the connection threshold has been defined as the value of d below which no spanning configuration can be found even after occupying all the bonds satisfying the connection criterion δle d. The behavior of d_c(α) is markedly different for the two lattices.

We study combinatorial Banach spaces, i.e. Banach spaces induced by families of finite sets, of uncountable density. We prove some general theorems, for example we characterize when such spaces contain isomorphic copies of long c_0 and long ell_1. We discuss the existence of Banach spaces which are (complementedly) universal in the category of Banach spaces with unconditional basis of fixed cardinality. We present some examples, in particular we show that the Banach spaces generated by Suslin trees do not contain uncountable equilateral sets.

A popular way to approximate the Koopman operator's action on a finite-dimensional subspace of functions is via orthogonal projections. The quality of the projected model directly depends on the selected subspace, specifically on how close it is to being invariant under the Koopman operator. The notion of invariance proximity provides a tight upper bound on the worst-case relative prediction error of the finite-dimensional model. However, its direct calculation is computationally challenging. This paper leverages the geometric structure behind the definition of invariance proximity to provide a closed-form expression in terms of Jordan principal angles on general inner product spaces. Unveiling this connection allows us to exploit specific isomorphisms to circumvent the computational challenges associated with spaces of functions and enables the use of existing efficient numerical routines to compute invariance proximity.

We present a faster algorithm to generate a warm start for sampling an arbitrary logconcave density specified by an evaluation oracle, leading to the first sub-cubic sampling algorithms for inputs in (near-)isotropic position. A long line of prior work incurred a warm-start penalty of at least linear in the dimension, hitting a cubic barrier, even for the special case of uniform sampling from convex bodies. Our improvement relies on two key ingredients of independent interest. (1) We show how to sample given a warm start in weaker notions of distance, in particular q-R\'enyi divergence for q=mathcal{O}(1), whereas previous analyses required stringent infty-R\'enyi divergence (with the exception of Hit-and-Run, whose known mixing time is higher). This marks the first improvement in the required warmness since Lov\'asz and Simonovits (1991). (2) We refine and generalize the log-Sobolev inequality of Lee and Vempala (2018), originally established for isotropic logconcave distributions in terms of the diameter of the support, to logconcave distributions in terms of a geometric average of the support diameter and the largest eigenvalue of the covariance matrix.

The recent success of distributed word representations has led to an increased interest in analyzing the properties of their spatial distribution. Several studies have suggested that contextualized word embedding models do not isotropically project tokens into vector space. However, current methods designed to measure isotropy, such as average random cosine similarity and the partition score, have not been thoroughly analyzed and are not appropriate for measuring isotropy. We propose IsoScore: a novel tool that quantifies the degree to which a point cloud uniformly utilizes the ambient vector space. Using rigorously designed tests, we demonstrate that IsoScore is the only tool available in the literature that accurately measures how uniformly distributed variance is across dimensions in vector space. Additionally, we use IsoScore to challenge a number of recent conclusions in the NLP literature that have been derived using brittle metrics of isotropy. We caution future studies from using existing tools to measure isotropy in contextualized embedding space as resulting conclusions will be misleading or altogether inaccurate.

Finite unions of convex sets are a central object of study in discrete and computational geometry. In this paper we initiate a systematic study of complements of such unions -- i.e., sets of the form S=R^d setminus (cup_{i=1}^n K_i), where K_i are convex sets. In the first part of the paper we study isolated points in S, whose number is related to the Betti numbers of cup_{i=1}^n K_i and to its non-convexity properties. We obtain upper bounds on the number of such points, which are sharp for n=3 and significantly improve previous bounds of Lawrence and Morris (2009) for all n ll 2^d{d}. In the second part of the paper we study coverings of S by well-behaved sets. We show that S can be covered by at most g(d,n) flats of different dimensions, in such a way that each x in S is covered by a flat whose dimension equals the `local dimension' of S in the neighborhood of x. Furthermore, we determine the structure of a minimum cover that satisfies this property. Then, we study quantitative aspects of this minimum cover and obtain sharp upper bounds on its size in various settings.

The Weak Gravity Conjecture has recently been re-formulated in terms of a particle with non-negative self-binding energy. Because of the dual conformal field theory (CFT) formulation in the anti-de Sitter space the conformal dimension Delta (Q) of the lowest-dimension operator with charge Q under some global U(1) symmetry must be a convex function of Q. This property has been conjectured to hold for any (unitary) conformal field theory and generalized to larger global symmetry groups. Here we refine and further test the convex charge conjecture via semiclassical computations for fixed charge sectors of different theories in different dimensions. We analyze the convexity properties of the leading and next-to-leading order terms stemming from the semiclassical computation, de facto, extending previous tests beyond the leading perturbative contributions and to arbitrary charges. In particular, the leading contribution is sufficient to test convexity in the semiclassical computations. We also consider intriguing cases in which the models feature a transition from real to complex conformal dimensions either as a function of the charge or number of matter fields. As a relevant example of the first kind, we investigate the O(N) model in 4+epsilon dimensions. As an example of the second type we consider the U(N)times U(M) model in 4-epsilon dimensions. Both models display a rich dynamics where, by changing the number of matter fields and/or charge, one can achieve dramatically different physical regimes. We discover that whenever a complex conformal dimension appears, the real part satisfies the convexity property.

Deep networks often suffer from vanishing or exploding gradients due to inefficient signal propagation, leading to long training times or convergence difficulties. Various architecture designs, sophisticated residual-style networks, and initialization schemes have been shown to improve deep signal propagation. Recently, Pennington et al. used free probability theory to show that dynamical isometry plays an integral role in efficient deep learning. We show that the simplest architecture change of gating each residual connection using a single zero-initialized parameter satisfies initial dynamical isometry and outperforms more complex approaches. Although much simpler than its predecessors, this gate enables training thousands of fully connected layers with fast convergence and better test performance for ResNets trained on CIFAR-10. We apply this technique to language modeling and find that we can easily train 120-layer Transformers. When applied to 12 layer Transformers, it converges 56% faster on enwiki8.

We study the robust interpolation problem of arbitrary data distributions supported on a bounded space and propose a two-fold law of robustness. Robust interpolation refers to the problem of interpolating n noisy training data points in R^d by a Lipschitz function. Although this problem has been well understood when the samples are drawn from an isoperimetry distribution, much remains unknown concerning its performance under generic or even the worst-case distributions. We prove a Lipschitzness lower bound Omega(n/p) of the interpolating neural network with p parameters on arbitrary data distributions. With this result, we validate the law of robustness conjecture in prior work by Bubeck, Li, and Nagaraj on two-layer neural networks with polynomial weights. We then extend our result to arbitrary interpolating approximators and prove a Lipschitzness lower bound Omega(n^{1/d}) for robust interpolation. Our results demonstrate a two-fold law of robustness: i) we show the potential benefit of overparametrization for smooth data interpolation when n=poly(d), and ii) we disprove the potential existence of an O(1)-Lipschitz robust interpolating function when n=exp(omega(d)).

We establish explicit means via which natural dilations of completely positive (CP) maps can be constructed à la Kraus's IInd representation theorem. To obtain this, we rely on the Choi-Jamiołkowski correspondence and develop a Cholesky algorithm for bi-partite systems. This enables a canonical construction of adjoint actions which recover the behaviour of the original CP-maps. Our results hold under separability assumptions and the requirement that the maps are completely bounded and preserve the subideal of finite rank operators.

Real-world phenomena do not generate arbitrary variability: their signals concentrate on compact, low-variability subsets of functional space, enabling rapid generalization from few examples. A small child can recognize a dog after extremely limited exposure because the perceptual manifold of "dog" is compact, structured, and low-dimensional. We formalize this principle through a deterministic functional-topological framework in which the set of valid realizations produced by a physical process forms a compact subset of a Banach space, endowed with stable invariants, a finite Hausdorff radius, and an induced continuous perceptual functional. This geometry provides explicit limits on knowledge, conditions for identifiability, and guarantees for generalization from sparse evidence -- properties fundamental to both natural and artificial intelligence. Across electromechanical, electrochemical, and physiological domains, we show that real-world processes consistently generate compact perceptual manifolds with the same geometric characteristics. Their boundaries can be discovered in a fully self-supervised manner as the empirical radius saturates with increasing sampling, even when the governing equations are unknown. These results demonstrate that deterministic functional topology offers a unified mathematical foundation for perception, representation, and world-model construction. It provides a geometric explanation for why biological learners and self-supervised AI systems can generalize from few observations, and establishes compact perceptual manifolds as a fundamental building block for future AI architectures. Finally, this work unifies biological perception and modern self-supervised models under a single geometric principle: both derive their generalization ability from the compactness and invariants of real-world perceptual manifolds.

A recurring challenge in self-supervised learning is preventing representation collapse. Existing solutions typically rely on global regularization, such as maximizing distances, decorrelating dimensions or enforcing certain distributions. We instead reinterpret representation learning as a discrete packing problem, where preserving information simplifies to maintaining injectivity. We operationalize this in Hypersolid, a method using short-range hard-ball repulsion to prevent local collisions. This constraint results in a high-separation geometric regime that preserves augmentation diversity, excelling on fine-grained and low-resolution classification tasks.

We study the relation between equal-weight circle quadrature, Gauss--Chebyshev quadrature, and planar Minkowski reconstruction. The regular N-point grid is an mathbb S^1-design of strength N-1; a half-step rotation of the 2M-point grid projects to the classical M-point Gauss--Chebyshev rule. A common family of quadrature-error functionals gives exact identities for integration error, mixed-area error, and support-function error. For Nge3, the centered Minkowski polygon P_N with perimeter 2π has the exact Hausdorff distance from the unit disk B^2 \[ d_H(P_N,B^2)=1-\fracπ{N}\cot\fracπ{N} =π^2{3N^2}+O(N^{-4}). \] With Steiner centering, we obtain d_H(K_μ,K_ν)leπW_1(μ,ν) for balanced, nondegenerate probability measures, where W_1 uses geodesic distance. Its exponent is sharp even for smooth positive densities near the uniform measure. The identity W_1(ν_N,σ)=π/(2N) yields a general O(N^{-1}) bound for the regular grid. The sharper O(N^{-2}) rate follows from the sparse discrepancy spectrum and the inverse multiplier (1-k^2)^{-1}. Finally, a perturbation estimate gives sufficient conditions for preserving the quadratic rate and its leading constant.

We present, for the first time, a novel theoretical approach to address the problem of correspondence free multivector cloud registration in conformal geometric algebra. Such formalism achieves several favorable properties. Primarily, it forms an orthogonal automorphism that extends beyond the typical vector space to the entire conformal geometric algebra while respecting the multivector grading. Concretely, the registration can be viewed as an orthogonal transformation (\it i.e., scale, translation, rotation) belonging to SO(4,1) - group of special orthogonal transformations in conformal geometric algebra. We will show that such formalism is able to: (i) perform the registration without directly accessing the input multivectors. Instead, we use primitives or geometric objects provided by the conformal model - the multivectors, (ii) the geometric objects are obtained by solving a multilinear eigenvalue problem to find sets of eigenmultivectors. In this way, we can explicitly avoid solving the correspondences in the registration process. Most importantly, this offers rotation and translation equivariant properties between the input multivectors and the eigenmultivectors. Experimental evaluation is conducted in datasets commonly used in point cloud registration, to testify the usefulness of the approach with emphasis to ambiguities arising from high levels of noise. The code is available at https://github.com/Numerical-Geometric-Algebra/RegistrationGA . This work was submitted to the International Journal of Computer Vision and is currently under review.

In this paper, we deduce a Bochner-type identity for compact gradient Einstein-type manifolds with boundary. As consequence, we are able to show a rigidity result for Einstein-type manifolds assuming the parallel Ricci curvature condition. Moreover, we provide a condition on the norm of the gradient of the potential function in order to classify such structures.

We study the task of agnostically learning halfspaces under the Gaussian distribution. Specifically, given labeled examples (x,y) from an unknown distribution on R^n times { pm 1}, whose marginal distribution on x is the standard Gaussian and the labels y can be arbitrary, the goal is to output a hypothesis with 0-1 loss OPT+epsilon, where OPT is the 0-1 loss of the best-fitting halfspace. We prove a near-optimal computational hardness result for this task, under the widely believed sub-exponential time hardness of the Learning with Errors (LWE) problem. Prior hardness results are either qualitatively suboptimal or apply to restricted families of algorithms. Our techniques extend to yield near-optimal lower bounds for related problems, including ReLU regression.

We present a generalization of the proximal operator defined through a convex combination of convex objectives, where the coefficients are updated in a minimax fashion. We prove that this new operator is Bregman firmly nonexpansive with respect to a Bregman divergence that combines Euclidean and information geometries.

Treemaps are a popular technique to visualize hierarchical data. The input is a weighted tree tree where the weight of each node is the sum of the weights of its children. A treemap for tree is a hierarchical partition of a rectangle into simply connected regions, usually rectangles. Each region represents a node of tree and its area is proportional to the weight of the corresponding node. An important quality criterion for treemaps is the aspect ratio of its regions. One cannot bound the aspect ratio if the regions are restricted to be rectangles. In contrast, polygonal partitions, that use convex polygons, have bounded aspect ratio. We are the first to obtain convex partitions with optimal aspect ratio O(depth(tree)). However, depth(tree) still depends on the input tree. Hence we introduce a new type of treemaps, namely orthoconvex treemaps, where regions representing leaves are rectangles, L-, and S-shapes, and regions representing internal nodes are orthoconvex polygons. We prove that any input tree, irrespective of the weights of the nodes and the depth of the tree, admits an orthoconvex treemap of constant aspect ratio. We also obtain several specialized results for single-level treemaps, that is, treemaps where the input tree has depth~1.

The Shadowing Principle of Manin has proved a valuable tool for addressing questions of quantitative topology raised by Gromov in the late 1900s. The principle informally provides a way for bounded algebraic maps between differential graded algebras to be translated into nearby genuine maps between their geometric realizations. We extend this principle to finite towers of principal K(G,n) fibrations, and in particular apply this construction to nilpotent spaces. As a specific application of the extended principle, we provide upper bounds on the asymptotic behavior of volumes of nullhomotopies of Lipschitz maps into nilpotent spaces. We further refine these bounds in the case when c = 1 to nearly meet those of the simply connected setting. We similarly refine these bounds in the event the target space is coformal, and demonstrate that the bounds in this setting are nearly sharp.

This paper investigates the generalization of Principal Component Analysis (PCA) to Riemannian manifolds. We first propose a new and general type of family of subspaces in manifolds that we call barycentric subspaces. They are implicitly defined as the locus of points which are weighted means of k+1 reference points. As this definition relies on points and not on tangent vectors, it can also be extended to geodesic spaces which are not Riemannian. For instance, in stratified spaces, it naturally allows principal subspaces that span several strata, which is impossible in previous generalizations of PCA. We show that barycentric subspaces locally define a submanifold of dimension k which generalizes geodesic subspaces.Second, we rephrase PCA in Euclidean spaces as an optimization on flags of linear subspaces (a hierarchy of properly embedded linear subspaces of increasing dimension). We show that the Euclidean PCA minimizes the Accumulated Unexplained Variances by all the subspaces of the flag (AUV). Barycentric subspaces are naturally nested, allowing the construction of hierarchically nested subspaces. Optimizing the AUV criterion to optimally approximate data points with flags of affine spans in Riemannian manifolds lead to a particularly appealing generalization of PCA on manifolds called Barycentric Subspaces Analysis (BSA).

Consider a standard graded artinian k-algebra B and an extension of B by a new variable, A=Botimes_k k[x]/(x^d) for some dgeq 1. We will show how maximal rank properties for powers of a general linear form on A can be determined by maximal rank properties for different powers of general linear forms on B. This is then used to study Lefschetz properties of algebras that can be obtained via such extensions. In particular, it allows for a new proof that monomial complete intersections have the strong Lefschetz property over a field of characteristic zero. Moreover, it gives a recursive formula for the determinants that show up in that case. Finally, for algebras over a field of characteristic zero, we give a classification for what properties B must have for all extensions Botimes_k k[x]/(x^d) to have the weak or the strong Lefschetz property.

Many geometric learning problems require invariants on heterogeneous product spaces, i.e., products of distinct spaces carrying different group actions, where standard techniques do not directly apply. We show that, when a group G acts transitively on a space M, any G-invariant function on a product space X times M can be reduced to an invariant of the isotropy subgroup H of M acting on X alone. Our approach establishes an explicit orbit equivalence (X times M)/G cong X/H, yielding a principled reduction that preserves expressivity. We apply this characterization to Equivariant Neural Fields, extending them to arbitrary group actions and homogeneous conditioning spaces, and thereby removing the major structural constraints imposed by existing methods.

For a parametric model of distributions, the closest distribution in the model to the true distribution located outside the model is considered. Measuring the closeness between two distributions with the Kullback-Leibler (K-L) divergence, the closest distribution is called the "information projection." The estimation risk of the maximum likelihood estimator (MLE) is defined as the expectation of K-L divergence between the information projection and the predictive distribution with plugged-in MLE. Here, the asymptotic expansion of the risk is derived up to n^{-2}-order, and the sufficient condition on the risk for the Bayes error rate between the true distribution and the information projection to be lower than a specified value is investigated. Combining these results, the "p-n criterion" is proposed, which determines whether the MLE is sufficiently close to the information projection for the given model and sample. In particular, the criterion for an exponential family model is relatively simple and can be used for a complex model with no explicit form of normalizing constant. This criterion can constitute a solution to the sample size or model acceptance problem. Use of the p-n criteria is demonstrated for two practical datasets. The relationship between the results and information criteria is also studied.

Strategies for the generation of periodic discrete structures with identical two-point correlation are developed. Starting from a pair of root structures, which are not related by translation, phase inversion or axis reflections, child structures of arbitrary resolution (i.e., pixel or voxel numbers) and number of phases (i.e., material phases/species) can be generated by means of trivial embedding based phase extension, application of kernels and/or phase coalescence, such that the generated structures inherit the two-point-correlation equivalence. Proofs of the inheritance property are provided by means of the Discrete Fourier Transform theory. A Python 3 implementation of the results is offered by the authors through the Github repository https://github.com/DataAnalyticsEngineering/EQ2PC in order to make the provided results reproducible and useful for all interested readers. Examples for the generation of structures are demonstrated, together with applications in the homogenization theory of periodic media.

The recursive-line and signed Zarankiewicz numbers maximize the number of squares in augmentations of a maximum C_4-free base, subject to two sufficient irreducibility criteria. The count includes one square per base cell and one per selected pair of unused cells. We compare these parameters with the second-order number, which uses irreducibility itself. Every maximum mtimes n base admits a recursive-line augmentation with at least mn/2-Cmax(m,n) squares, for an absolute constant C. Combining this bound with a two-column extension of known fixed-width families, we show that all three parameters are asymptotically equivalent, uniformly as the larger dimension tends to infinity. For individual displays, a transfer graph shows that once the signed closure identifies every selected pair, the signed criterion is equivalent to irreducibility. We determine the second-order number for every six-column rectangle and give eventual exact formulas for all three numbers at widths seven, nine and eleven. We also prove signed and recursive-line equality at 8times7 and, together with earlier values, whenever the shorter side is at most six, except possibly at 14times4. The exact-value results are computer-assisted, using exhaustive enumeration, checked propositional refutations and symbolic certificates with a proved lifting argument for arbitrary lengths.

A lattice quantizer approximates an arbitrary real-valued source vector with a vector taken from a specific discrete lattice. The quantization error is the difference between the source vector and the lattice vector. In a classic 1996 paper, Zamir and Feder show that the globally optimal lattice quantizer (which minimizes the mean square error) has white quantization error: for a uniformly distributed source, the covariance of the error is the identity matrix, multiplied by a positive real factor. We generalize the theorem, showing that the same property holds (i) for any lattice whose mean square error cannot be decreased by a small perturbation of the generator matrix, and (ii) for an optimal product of lattices that are themselves locally optimal in the sense of (i). We derive an upper bound on the normalized second moment (NSM) of the optimal lattice in any dimension, by proving that any lower- or upper-triangular modification to the generator matrix of a product lattice reduces the NSM. Using these tools and employing the best currently known lattice quantizers to build product lattices, we construct improved lattice quantizers in dimensions 13 to 15, 17 to 23, and 25 to 48. In some dimensions, these are the first reported lattices with normalized second moments below the best known upper bound.

The expressivity of Graph Neural Networks (GNNs) is dependent on the aggregation functions they employ. Theoretical works have pointed towards Sum aggregation GNNs subsuming every other GNNs, while certain practical works have observed a clear advantage to using Mean and Max. An examination of the theoretical guarantee identifies two caveats. First, it is size-restricted, that is, the power of every specific GNN is limited to graphs of a specific size. Successfully processing larger graphs may require an other GNN, and so on. Second, it concerns the power to distinguish non-isomorphic graphs, not the power to approximate general functions on graphs, and the former does not necessarily imply the latter. It is desired that a GNN's usability will not be limited to graphs of any specific size. Therefore, we explore the realm of unrestricted-size expressivity. We prove that basic functions, which can be computed exactly by Mean or Max GNNs, are inapproximable by any Sum GNN. We prove that under certain restrictions, every Mean or Max GNN can be approximated by a Sum GNN, but even there, a combination of (Sum, [Mean/Max]) is more expressive than Sum alone. Lastly, we prove further expressivity limitations for GNNs with a broad class of aggregations.

We study Krasner quotient hyperfields arising from finite fields, F_q/G_r, where G_rle F_q^times has index r. Building on the structure theorem of Baker--Jin, we determine the characteristic and C-characteristic of all sufficiently large such quotients: they depend only on the parity of r and, when r is even, on the residue class of q modulo 2r. In particular, the two Baker--Jin stable classes for even r are separated by characteristic 2 versus 3, while the C-characteristic is always 1. We complement this structural result with a computational laboratory: sharp Weil thresholds for Baker--Jin large-q isomorphism, empirical minimal stabilization bounds N_r^{emp}, complete finite-field quotient atlases for hyperfield orders nle 7, and comparisons with the enumerations of Ameri--Eyvazi--Hošková-Mayerová (orders le 6) and Massouros--Massouros (order 7). Among other findings, exactly 15 isomorphism types of order 7 arise as finite-field quotients, out of 277 hyperfields of that order -- a concrete data point toward the Baker--Jin rarity conjecture for quotients. All algorithms and tables are available in an open-source package suitable for independent verification and arXiv ancillary material.

Inverse inequalities are essential for controlling derivative growth and ensuring stable sampling in kernel approximation. Existing whole-space and single-scale estimates provide an established analytical basis, but their extension to multiscale analytic spaces on finite intervals requires uniform control of boundary effects and cross-scale cancellation. This paper establishes unweighted interval \(L^2\) inverse inequalities for spaces generated by primitives of kernels with positive exponential spectra. By retaining exterior diagonal energy and controlling off-diagonal interactions through one-sided estimates with endpoint-distance weights, we derive uniform coefficient bounds for normalized high derivatives. A synthesis-operator perturbation argument extends these bounds to positive spectral mixtures, while adjacent-derivative comparison and interval interpolation yield an inverse bound of order \(h_*^{-1}\), where \(h_*\) is the smallest scale. Under geometric scale separation and within-scale centre separation, the constant is independent of the number of scales and centres and their distances from the endpoints, allowing endpoint centres and coincident centres across scales. The coefficient lower bound approaches the optimal limit \(1/2\). Two-centre constructions establish the sharpness of the scale exponent for every fixed kernel in the class and, for a single exponential spectrum, a sharp deficit of order \(q^{-1/2}\) from \(1/2\) for the best uniform coefficient lower bound, where \(q\) is the derivative order. Numerical illustrations for Cauchy and logistic kernels demonstrate coefficient stability in several multiscale configurations. These results extend interval inverse estimates to multiscale analytic kernel spaces with endpoint centres and provide quantitative conditions for deterministic sampling stability.

Model dimension (d_{model}) is a fundamental hyperparameter in transformer language models, yet its role in setting the geometric limits of feature representation remains under-explored. Grounded in the Linear Representation and Superposition Hypotheses - which propose that models encode features as near-orthogonal directions in latent space - we develop a framework for estimating how many such directions a model can support. We first establish the embedding matrix as a measurable proxy for near-orthogonality constraints across the latent space: the boundary between meaningful token relationships and incidental similarity in the pairwise cosine similarity distribution gives a concrete estimate of the model's accepted deviation varepsilon from perfect orthogonality. Applying this metric across dozens of open-source models reveals two classes: models with high varepsilon whose embeddings lack near-orthogonal structure, and models with low varepsilon that maintain it. We then show that the standard Johnson-Lindenstrauss lemma greatly underestimates the packing efficiency of trained representations, and derive an adjusted capacity formula in which the number of near-orthogonal directions depends on the ratio of vectors to dimensions (k/d) rather than the raw count - a single modification that cuts prediction error by two orders of magnitude with no extra parameters. Combining these results, we define representational capacity as an upper bound on the number of distinguishable directions available for features and embeddings in a model's latent space. Capacity is exponentially sensitive to varepsilon, and larger models favor tighter orthogonality constraints over maximizing raw capacity - a pattern compatible with several explanations (a stability-capacity trade-off, a ceiling on usable concepts, or confounds with model scale) that we leave to future work.

An important feature of many real world facility location problems are capacity limits on the facilities. We show here how capacity constraints make it harder to design strategy proof mechanisms for facility location, but counter-intuitively can improve the guarantees on how well we can approximate the optimal solution.

We study a variant of quantum hypothesis testing wherein an additional 'inconclusive' measurement outcome is added, allowing one to abstain from attempting to discriminate the hypotheses. The error probabilities are then conditioned on a successful attempt, with inconclusive trials disregarded. We completely characterise this task in both the single-shot and asymptotic regimes, providing exact formulas for the optimal error probabilities. In particular, we prove that the asymptotic error exponent of discriminating any two quantum states ρ and σ is given by the Hilbert projective metric D_{max}(ρ|σ) + D_{max}(σ| ρ) in asymmetric hypothesis testing, and by the Thompson metric max { D_{max}(ρ|σ), D_{max}(σ| ρ) } in symmetric hypothesis testing. This endows these two quantities with fundamental operational interpretations in quantum state discrimination. Our findings extend to composite hypothesis testing, where we show that the asymmetric error exponent with respect to any convex set of density matrices is given by a regularisation of the Hilbert projective metric. We apply our results also to quantum channels, showing that no advantage is gained by employing adaptive or even more general discrimination schemes over parallel ones, in both the asymmetric and symmetric settings. Our state discrimination results make use of no properties specific to quantum mechanics and are also valid in general probabilistic theories.

Differential privacy (DP)'s effect in medical imaging is typically evaluated only through end-to-end performance, leaving the mechanism of privacy-induced utility loss unclear. We introduce Differential Privacy Representation Geometry for Medical Imaging (DP-RGMI), a framework that interprets DP as a structured transformation of representation space and decomposes performance degradation into encoder geometry and task-head utilization. Geometry is quantified by representation displacement from initialization and spectral effective dimension, while utilization is measured as the gap between linear-probe and end-to-end utility. Across over 594,000 images from four chest X-ray datasets and multiple pretrained initializations, we show that DP is consistently associated with a utilization gap even when linear separability is largely preserved. At the same time, displacement and spectral dimension exhibit non-monotonic, initialization- and dataset-dependent reshaping, indicating that DP alters representation anisotropy rather than uniformly collapsing features. Correlation analysis reveals that the association between end-to-end performance and utilization is robust across datasets but can vary by initialization, while geometric quantities capture additional prior- and dataset-conditioned variation. These findings position DP-RGMI as a reproducible framework for diagnosing privacy-induced failure modes and informing privacy model selection.

With the widespread adoption of machine learning systems, the need to curtail their behavior has become increasingly apparent. This is evidenced by recent advancements towards developing models that satisfy robustness, safety, and fairness requirements. These requirements can be imposed (with generalization guarantees) by formulating constrained learning problems that can then be tackled by dual ascent algorithms. Yet, though these algorithms converge in objective value, even in non-convex settings, they cannot guarantee that their outcome is feasible. Doing so requires randomizing over all iterates, which is impractical in virtually any modern applications. Still, final iterates have been observed to perform well in practice. In this work, we address this gap between theory and practice by characterizing the constraint violation of Lagrangian minimizers associated with optimal dual variables, despite lack of convexity. To do this, we leverage the fact that non-convex, finite-dimensional constrained learning problems can be seen as parametrizations of convex, functional problems. Our results show that rich parametrizations effectively mitigate the issue of feasibility in dual methods, shedding light on prior empirical successes of dual learning. We illustrate our findings in fair learning tasks.

For w in the symmetric group, we provide an exact formula for the smallest positive power q^{h(w)} appearing in the Kazhdan-Lusztig polynomial P_{e,w}(q). We also provide a tight upper bound on h(w) in simply-laced types, resolving a conjecture of Billey-Postnikov from 2002.

We present a new proof of the necessary and sufficient condition for the existence of a triangle that is simultaneously inscribed in a circle and circumscribed about a central conic (an ellipse or a hyperbola). In the limiting case where the foci of the conic coincide, the condition reduces to the classical Chapple-Euler relation. We also prove that the sum of the squared sides lengths of a Poncelet triangle is invariant over a family of Poncelet triangles inscribed in a circle and circumscribed about a central conic if and only if the circle is centered either at the center of the conic or at one of the foci of the conic, among several other properties of such triangles that we derive.

Neural multivariate regression underpins a wide range of domains such as control, robotics, and finance, yet the geometry of its learned representations remains poorly characterized. While neural collapse has been shown to benefit generalization in classification, we find that analogous collapse in regression consistently degrades performance. To explain this contrast, we analyze models through the lens of intrinsic dimension. Across control tasks and synthetic datasets, we estimate the intrinsic dimension of last-layer features (ID_H) and compare it with that of the regression targets (ID_Y). Collapsed models exhibit ID_H < ID_Y, leading to over-compression and poor generalization, whereas non-collapsed models typically maintain ID_H > ID_Y. For the non-collapsed models, performance with respect to ID_H depends on the data quantity and noise levels. From these observations, we identify two regimes (over-compressed and under-compressed) that determine when expanding or reducing feature dimensionality improves performance. Our results provide new geometric insights into neural regression and suggest practical strategies for enhancing generalization.

The Leggett-Garg inequalities probe the classical-quantum boundary by putting limits on the sum of pairwise correlation functions between classical measurement devices that consecutively measured the same quantum system. The apparent violation of these inequalities by standard quantum measurements has cast doubt on quantum mechanics' ability to consistently describe classical objects. Recent work has concluded that these inequalities cannot be violated by either strong or weak projective measurements [1]. Here I consider an entropic version of the Leggett-Garg inequalities that are different from the standard inequalities yet similar in form, and can be defined without reference to any particular observable. I find that the entropic inequalities also cannot be be violated by strong quantum measurements. The entropic inequalities can be extended to describe weak quantum measurements, and I show that these weak entropic Leggett-Garg inequalities cannot be violated either even though the quantum system remains unprojected, because the inequalities describe the classical measurement devices, not the quantum system. I conclude that quantum mechanics adequately describes classical devices, and that we should be careful not to assume that the classical devices accurately describe the quantum system.

Machine-learning datasets labelled "4D" universally denote three spatial dimensions plus time. We introduce HyperShadow, the first public benchmark in which the fourth, fifth, and sixth dimensions are spatial: the task is to decide whether a 3D point cloud is a native three-dimensional shape or the projection, the "shadow", of a rigid object living in R^N (N = 4-6). We show this task is fundamentally distinct from intrinsic-dimension estimation: a shadow is still at-most-3-dimensional data, and standard estimators (TwoNN, Levina-Bickel MLE) reach only 71-73% accuracy. Detection instead requires projection signatures, density folds, filled volumes with characteristic radial profiles, and topology changes, which a 190k-parameter point network recovers at 96.6% accuracy across four corruption tiers, generalizing at 79-91% to object families never seen in training. On a temporal track of rigidly rotating objects we introduce a zero-parameter rigidity witness: the residual of the optimal rigid 3D alignment (Kabsch) between consecutive frames, which must vanish for any rigid 3D motion but cannot vanish for the shadow of a rigid rotation in R^N. This single interpretable statistic separates the classes at AUROC 0.982. All data are generated reproducibly from seeds; the dataset, models, and code are released publicly. HyperShadow makes no claim about physical reality; it is a controlled instrument for studying which observable statistics can certify incompatibility with a purely three-dimensional explanation.

Machine learning for point clouds has been attracting much attention, with many applications in various fields, such as shape recognition and material science. For enhancing the accuracy of such machine learning methods, it is often effective to incorporate global topological features, which are typically extracted by persistent homology. In the calculation of persistent homology for a point cloud, we choose a filtration for the point cloud, an increasing sequence of spaces. Since the performance of machine learning methods combined with persistent homology is highly affected by the choice of a filtration, we need to tune it depending on data and tasks. In this paper, we propose a framework that learns a filtration adaptively with the use of neural networks. In order to make the resulting persistent homology isometry-invariant, we develop a neural network architecture with such invariance. Additionally, we show a theoretical result on a finite-dimensional approximation of filtration functions, which justifies the proposed network architecture. Experimental results demonstrated the efficacy of our framework in several classification tasks.

A collection of robust Mahalanobis distances for multivariate outlier detection is proposed, based on the notion of shrinkage. Robust intensity and scaling factors are optimally estimated to define the shrinkage. Some properties are investigated, such as affine equivariance and breakdown value. The performance of the proposal is illustrated through the comparison to other techniques from the literature, in a simulation study and with a real dataset. The behavior when the underlying distribution is heavy-tailed or skewed, shows the appropriateness of the method when we deviate from the common assumption of normality. The resulting high correct detection rates and low false detection rates in the vast majority of cases, as well as the significantly smaller computation time shows the advantages of our proposal.

Training large-scale neural networks requires solving nonconvex optimization where the choice of optimizer fundamentally determines both convergence behavior and computational efficiency. While adaptive methods like Adam have long dominated practice, the recently proposed Muon optimizer achieves superior performance through orthogonalized momentum updates that enforce isotropic geometry with uniform singular values. However, this strict isotropy discards potentially valuable curvature information encoded in gradient spectra, motivating optimization methods that balance geometric structure with adaptivity. We introduce FISMO (Fisher-Structured Momentum-Orthogonalized) optimizer, which generalizes isotropic updates to incorporate anisotropic curvature information through Fisher information geometry. By reformulating the optimizer update as a trust-region problem constrained by a Kronecker-factored Fisher metric, FISMO achieves structured preconditioning that adapts to local loss landscape geometry while maintaining computational tractability. We establish convergence guarantees for FISMO in stochastic nonconvex settings, proving an O(1/T) rate for the expected squared gradient norm with explicit characterization of variance reduction through mini-batching. Empirical evaluation on image classification and language modeling benchmarks demonstrates that FISMO achieves superior training efficiency and final performance compared to established baselines.

Reconstructing articulated objects with multiple movable parts is essential for understanding object structure and enabling physical interaction. However, this reconstruction task poses significant challenges due to the entanglement of geometry, appearance, and motion parameters during optimization. Existing methods rely primarily on photometric supervision, which commonly fails to disentangle these interdependent components, resulting in poor part decomposition with blurred boundaries and geometric artifacts. To address this limitation, we introduce StructureGS, a reconstruction framework for articulated objects that integrates structure-aware guidance into 3D Gaussian Splatting. Our approach leverages oriented bounding boxes of object parts to enforce two key structural properties: spatial coherence, which constrains each part's geometry to remain compact and spatially coherent within its designated region, and structural connectivity, which enforces physically plausible contact relationships between adjacent parts. These properties are realized through structure-aware losses that inject explicit structural constraints into the optimization process. Extensive experiments demonstrate that our method achieves state-of-the-art performance in articulated object reconstruction, producing high-quality results with well-defined part geometries.

We generalise a technique of Bhat and Skeide (2015) to interpolate commuting families {S_{i}}_{i in I} of contractions on a Hilbert space H, to commuting families {T_{i}}_{i in I} of contractive C_{0}-semigroups on L^{2}(prod_{i in I}T) otimes H. As an excursus, we provide applications of the interpolations to time-discretisation and the embedding problem. Applied to Parrott's construction (1970), we then demonstrate for d in N with d geq 3 the existence of commuting families {T_{i}}_{i=1}^{d} of contractive C_{0}-semigroups which admit no simultaneous unitary dilation. As an application of these counter-examples, we obtain the residuality wrt. the topology of uniform wot-convergence on compact subsets of R_{geq 0}^{d} of non-unitarily dilatable and non-unitarily approximable d-parameter contractive C_{0}-semigroups on separable infinite-dimensional Hilbert spaces for each d geq 3. Similar results are also developed for d-tuples of commuting contractions. And by building on the counter-examples of Varopoulos--Kaijser (1973--74), a 0--1-result is obtained for the von Neumann inequality. Finally, we discuss applications to rigidity as well as the embedding problem, viz. that `typical' pairs of commuting operators can be simultaneously embedded into commuting pairs of C_{0}-semigroups, which extends results of Eisner (2009--10).

We present anyakrakusuma, an open-source Python library that solves the discrete static Schrödinger bridge problem, the entropically regularized counterpart of optimal transport, through a log-domain Sinkhorn--Knopp iteration and reconstructs the entropic interpolation between two empirical point clouds. The solver is paired with a diagnostic pipeline that characterizes the optimal coupling and the intermediate distributions through information-theoretic and geometric measures. We exercise the library on four idealized planar cases spanning a circle-to-circle dilation, a spiral-to-mixture fragmentation, a rigid reorientation of two moons, and a Lissajous-to-trefoil deformation. The log-domain formulation is necessary rather than merely convenient at the parameters studied, where the cost-to-regularization ratio reaches four hundred and the Gibbs kernel underflows double precision across most of its range; the iteration nonetheless attains a marginal residual of 10^{-9} and unit marginal fidelity in every case. Residual histories decay geometrically over approximately eight decades at per-iteration contraction factors between 0.966 and 0.976, which are local rates near the fixed point that lie many orders of magnitude below the worst-case Hilbert-metric bound. The covariance analysis recovers an imposed ninety-degree reorientation to within 0.07^circ, roughly forty times smaller than its uncertainty, across a masked interval of near-isotropy on which the principal axis is unobservable. The diagnostics are reported with explicit attention to the regimes in which each is well defined, including the differential entropy, which is meaningful only on the open interpolation interval. The presented cases are constructed rather than measured; quantitative application to empirical point clouds requires further study.

Construction of ambiguity set in robust optimization relies on the choice of divergences between probability distributions. In distribution learning, choosing appropriate probability distributions based on observed data is critical for approximating the true distribution. To improve the performance of machine learning models, there has recently been interest in designing objective functions based on Lp-Wasserstein distance rather than the classical Kullback-Leibler (KL) divergence. In this paper, we derive concentration and asymptotic results using Bregman divergence. We propose a novel asymmetric statistical divergence called Wasserstein-Bregman divergence as a generalization of L2-Wasserstein distance. We discuss how these results can be applied to the construction of ambiguity set in robust optimization.

We propose a novel mixed-integer programming (MIP) formulation for generating precise sparse correspondences for highly non-rigid shapes. To this end, we introduce a projected Laplace-Beltrami operator (PLBO) which combines intrinsic and extrinsic geometric information to measure the deformation quality induced by predicted correspondences. We integrate the PLBO, together with an orientation-aware regulariser, into a novel MIP formulation that can be solved to global optimality for many practical problems. In contrast to previous methods, our approach is provably invariant to rigid transformations and global scaling, initialisation-free, has optimality guarantees, and scales to high resolution meshes with (empirically observed) linear time. We show state-of-the-art results for sparse non-rigid matching on several challenging 3D datasets, including data with inconsistent meshing, as well as applications in mesh-to-point-cloud matching.

This thesis is divided into three parts. The first part deals with cylindric plane partitions. The second with lambda-determinants and the third with commutators in semi-circular systems. For more detailed abstract please see inside. Cylindric plane partitions may be thought of as a natural generalization of reverse plane partitions. A generating series for the enumeration of cylindric plane partitions was recently given by Borodin. The first result of section one is a new bijective proof of Borodin's identity which makes use of Fomin's growth diagram framework for generalized RSK correspondences. The second result is a (q,t)-analog of Borodin's identity which extends previous work by Okada in the reverse plane partition case. The third result is an explicit combinatorial interpretation of the Macdonald weight occurring in the (q,t)-analog using the non-intersecting lattice path model for cylindric plane partitions. Alternating sign matrices were discovered by Robbins and Rumsey whilst studying λ-determinants. In the second part of this thesis we prove a multi-parameter generalization of the λ-determinant, generalizing a recent result by di Francesco. Like the original λ-determinant, our formula exhibits the Laurent phenomenon. Semicircular systems were first introduced by Voiculescu as a part of his study of von Neumann algebras. In the third part of this thesis we study certain commutator subalgebras of the semicircular system. We find a projection matrix with an interesting self-similar structure. Making use of our projection formula we given an alternative, elementary proof that the semicircular system is a factor.

3D point clouds play a pivotal role in outdoor scene perception, especially in the context of autonomous driving. Recent advancements in 3D LiDAR segmentation often focus intensely on the spatial positioning and distribution of points for accurate segmentation. However, these methods, while robust in variable conditions, encounter challenges due to sole reliance on coordinates and point intensity, leading to poor isometric invariance and suboptimal segmentation. To tackle this challenge, our work introduces Range-Aware Pointwise Distance Distribution (RAPiD) features and the associated RAPiD-Seg architecture. Our RAPiD features exhibit rigid transformation invariance and effectively adapt to variations in point density, with a design focus on capturing the localized geometry of neighboring structures. They utilize inherent LiDAR isotropic radiation and semantic categorization for enhanced local representation and computational efficiency, while incorporating a 4D distance metric that integrates geometric and surface material reflectivity for improved semantic segmentation. To effectively embed high-dimensional RAPiD features, we propose a double-nested autoencoder structure with a novel class-aware embedding objective to encode high-dimensional features into manageable voxel-wise embeddings. Additionally, we propose RAPiD-Seg which incorporates a channel-wise attention fusion and two effective RAPiD-Seg variants, further optimizing the embedding for enhanced performance and generalization. Our method outperforms contemporary LiDAR segmentation work in terms of mIoU on SemanticKITTI (76.1) and nuScenes (83.6) datasets.

This paper has two aims, first one is to introduce special kind of proximal contractions guaranteeing a finite number of best proximity points, and second one is to derive best proximity point results for perimetric contractions. To meet these two aims, we introduce two new proximal contractions: perimetric proximal contractions of the first and the second kind, and derive best proximity point results for these mappings. We establish that for these particular mappings, best proximity points are not necessarily unique; however, we provide an upper bound, proving that at most two such points can exist. To establish the validity of our results, we provide illustrative examples demonstrating that these newly defined mappings can possess unique or exactly two best proximity points.

We prove a single-logarithm bound for the eigenvalues in the plunge region of Fourier concentration operators, removing the extra logarithmic factor in the Kulikov--Dam Larsen bound for two general admissible sets throughout each fixed exponential window. For bounded spatial and frequency sets A,BsubsetR^d of positive measure with finite upper codimension-one Minkowski boundary content, the number Λ_varepsilon(cA,B) of eigenvalues in (varepsilon,1-varepsilon) satisfies Λ_varepsilon(cA,B)le C(d,A,B,β)c^{d-1}D(1+log_+(c/D)), where D=log(1/(varepsilon(1-varepsilon))), for every fixed β>0, cge2, 0<varepsilon<1/2, and Dleβc, with log_+t=max(0,log t). The argument uses positive band-limited smoothing and requires no symmetry, convexity, or connectedness. In dimension two, the corresponding exponential-window estimate has a constant uniform in the window parameter. We also determine the optimal coordinate-Lipschitz constant d-1 for recursive decompositions of balls and standard simplices in every dimension, and obtain box-frequency estimates with explicit geometric constants. For C^1 convex bodies in three dimensions, the optimal infimum of recursive coordinate slopes is 2. Uniform real-order Bessel estimates give independent disk and ball bounds at every spectral threshold, including an explicit deep-tail term. For smooth strictly convex planar frequency bodies with positive curvature, we prove correlation estimates for aligned Gaussian packets at arbitrary relative scales and quantitative lower bounds on the cost of estimating spatial blocks separately. Together these results connect the global spectral bound with sharp geometric constructions and the cancellation retained by grouping boundary interactions.

Randomized Smoothing (RS) has been proven a promising method for endowing an arbitrary image classifier with certified robustness. However, the substantial uncertainty inherent in the high-dimensional isotropic Gaussian noise imposes the curse of dimensionality on RS. Specifically, the upper bound of {ell_2} certified robustness radius provided by RS exhibits a diminishing trend with the expansion of the input dimension d, proportionally decreasing at a rate of 1/d. This paper explores the feasibility of providing {ell_2} certified robustness for high-dimensional input through the utilization of dual smoothing in the lower-dimensional space. The proposed Dual Randomized Smoothing (DRS) down-samples the input image into two sub-images and smooths the two sub-images in lower dimensions. Theoretically, we prove that DRS guarantees a tight {ell_2} certified robustness radius for the original input and reveal that DRS attains a superior upper bound on the {ell_2} robustness radius, which decreases proportionally at a rate of (1/sqrt m + 1/sqrt n ) with m+n=d. Extensive experiments demonstrate the generalizability and effectiveness of DRS, which exhibits a notable capability to integrate with established methodologies, yielding substantial improvements in both accuracy and {ell_2} certified robustness baselines of RS on the CIFAR-10 and ImageNet datasets. Code is available at https://github.com/xiasong0501/DRS.

We study single-error detection and correction for analog codes over R. The key performance measures are the parameters Γ_1(C) and Γ_2(C), which quantify, respectively, the minimum separation required between large outlying errors that must be detected or located and the magnitude of tolerable perturbations. First, we prove that every real linear [n,k] code C satisfies \[ Γ_1(C)\ge 2\left\lceiln{n-k}\right\rceil. \] Moreover, when k=n-2, we prove that every real linear [n,n-2] code C satisfies \[ Γ_2(C)\ge 1{\sin^2(π/2n)}. \] Together, these two lower bounds settle all four open problems of Roth concerning the optimality of single-error-detecting and single-error-correcting analog codes. The proof of the first bound is based on a double-induction argument, while the proof of the second combines a zonotope-based geometric characterization of Γ_2(C) with a cyclic sine-product inequality. In addition, we construct analog codes with higher fixed redundancy and show that, for every fixed rge 2, there exists a class of linear [n,ge n-r] codes over R such that \[ Γ_2(C)\le O\left(n^{1+1{r-1}}\right). \] This gives a new upper bound in the fixed-redundancy regime, which was not covered by previously known constructions.

A significant gap exists between theory and practice in deep learning. Generalization and approximation error bounds are often derived for simplified models or are too loose to be informative. Many rely on the manifold hypothesis and on geometric regularity such as intrinsic dimension, curvature, and reach. Progress requires insight into data-manifold geometry and suitable benchmarks, yet existing options are polarized: analytic manifolds with known geometry but limited applicability, or real-world datasets where geometry is only coarsely estimable. We introduce a benchmarking framework for studying data geometry. We repurpose and extend dSprites and COIL-20 with additional transformation dimensions and dense, axis-aligned sampling, and pair them with finite-difference estimators that recover curvature, reach, and volume at near-ground-truth accuracy in a regime where general-purpose estimators are unreliable or difficult to deploy. The framework is intended as a controlled testbed, useful as a calibration environment for geometric estimators and a sandbox for probing theoretical assumptions. To illustrate its use, we present two application studies, namely assessing the scaling behavior of the bounds of Genovese et al. and Fefferman et al., and tracking the layer-wise geometry of a β-VAE, highlighting the behavior of current bounds and the value of controlled benchmarks for guiding and validating future theory. A reference implementation is available at https://github.com/koulakis/manifold-microscope.

Developing equivariant neural networks for the E(3) group plays an important role in modeling 3D data across real-world applications. Enforcing this equivariance primarily involves the tensor products of irreducible representations (irreps). However, the computational complexity of such operations increases significantly as higher-order tensors are used. In this work, we propose a systematic approach to substantially accelerate the computation of the tensor products of irreps. We mathematically connect the commonly used Clebsch-Gordan coefficients to the Gaunt coefficients, which are integrals of products of three spherical harmonics. Through Gaunt coefficients, the tensor product of irreps becomes equivalent to the multiplication between spherical functions represented by spherical harmonics. This perspective further allows us to change the basis for the equivariant operations from spherical harmonics to a 2D Fourier basis. Consequently, the multiplication between spherical functions represented by a 2D Fourier basis can be efficiently computed via the convolution theorem and Fast Fourier Transforms. This transformation reduces the complexity of full tensor products of irreps from O(L^6) to O(L^3), where L is the max degree of irreps. Leveraging this approach, we introduce the Gaunt Tensor Product, which serves as a new method to construct efficient equivariant operations across different model architectures. Our experiments on the Open Catalyst Project and 3BPA datasets demonstrate both the increased efficiency and improved performance of our approach.

Recent advances in synthetic methods enable designing subunits that self-assemble into structures with well-defined sizes and architectures, but yields are frequently suppressed by the formation of off-target metastable structures. Increasing the complexity (number of distinct inter-subunit interaction types) can inhibit off-target structures, but leads to slower kinetics and higher synthesis costs. Here, we use icosahedral shells formed of programmable triangular subunits as a model system, and identify design principles that produce the highest target yield at the lowest complexity. We use a symmetry-based construction to create a range of design complexities, starting from the maximal symmetry Caspar-Klug assembly up to the fully addressable, zero-symmetry assembly. Kinetic Monte Carlo simulations reveal that the most prominent defects leading to off-target assemblies are a class of disclinations. We derive symmetry-based rules for identifying the optimal (lowest-complexity, highest-symmetry) design that inhibits these disclinations, leading to robust, high-fidelity assembly of targets with arbitrarily large sizes. Optimal complexity varies non-monotonically with target size, with `magic' sizes appearing for high-symmetry designs in which symmetry axes do not intersect vertices of the triangular net. The optimal designs at magic sizes require 12 times fewer inequivalent interaction-types than the (minimal symmetry) fully addressable construction.

Affine correspondences have received significant attention due to their benefits in tasks like image matching and pose estimation. Existing methods for extracting affine correspondences still have many limitations in terms of performance; thus, exploring a new paradigm is crucial. In this paper, we present a new pipeline designed for extracting accurate affine correspondences by integrating dense matching and geometric constraints. Specifically, a novel extraction framework is introduced, with the aid of dense matching and a novel keypoint scale and orientation estimator. For this purpose, we propose loss functions based on geometric constraints, which can effectively improve accuracy by supervising neural networks to learn feature geometry. The experimental show that the accuracy and robustness of our method outperform the existing ones in image matching tasks. To further demonstrate the effectiveness of the proposed method, we applied it to relative pose estimation. Affine correspondences extracted by our method lead to more accurate poses than the baselines on a range of real-world datasets. The code is available at https://github.com/stilcrad/DenseAffine.

Under ZF, we show that the statement that every subset of every R-vector space has a maximal convex subset is equivalent to the Axiom of Choice. We also study the strength of the same statement restricted to some specific R-vector spaces. In particular, we show that the statement for R^2 is equivalent to the Axiom of Countable Choice for reals, whereas the statement for R^3 is equivalent to the Axiom of Uniformization. We discuss the statement for some spaces of higher dimensions as well.

The honeycomb and Kelvin problems ask how space can be partitioned into cells of equal volume with the least surface area. We resolve this question in four dimensions for convex bodies that tile space by translations, showing that the regular 24-cell uniquely minimizes surface area at fixed volume. We develop a framework combining an exact deficit identity, valid in every dimension, with a descent argument. As a consequence, the regular 24-cell also minimizes surface area among such tiles containing a fixed ball.

We study quantum state tomography when the unknown state lies in a trace-distance ball of radius R around a known reference state ρ. For arbitrary collective measurements, we determine the minimax expected risk and confidence radius up to universal constants, uniformly over the dimension, center spectrum, radius, and sample size. Write Γ=d(Trsqrtρ)^2+d^2R. For dge2, 0<Rle1, and nge1 copies, the expected risk is Θ(min{R,Γ/n}). At failure probability 0<δle1/3, the minimax confidence radius is \[ Θ\!\left(\min\left\{R,\frac{Γ+\log(1/δ){n}}\right\}\right). \] For varepsilonle c_0R with a universal c_0>0, the copy complexity is Θ((Γ+log(1/δ))/varepsilon^2). For the lower bound we use a weighted trace-norm witness to retain all spectral scales in a square-root perturbation family. For the upper bound, we give a direct spectral and concentration analysis of a modified existing purification-based procedure.

Machine learning models have recently found tremendous success in data-driven control systems. However, standard learning models often suffer from an accuracy-robustness trade-off, which is a limitation that must be overcome in the control of safety-critical systems that require both high performance and rigorous robustness guarantees. In this work, we build upon the recent "locally biased smoothing" method to develop classifiers that simultaneously inherit high accuracy from standard models and high robustness from robust models. Specifically, we extend locally biased smoothing to the multi-class setting, and then overcome its performance bottleneck by generalizing the formulation to "mix" the outputs of a standard neural network and a robust neural network. We prove that when the robustness of the robust base model is certifiable, within a closed-form ell_p radius, no alteration or attack on an input can result in misclassification of the mixed classifier; the proposed model inherits the certified robustness. Moreover, we use numerical experiments on the CIFAR-10 benchmark dataset to verify that the mixed model noticeably improves the accuracy-robustness trade-off.