new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

When Neural Collapse Fails to Route: Routing Drift in Continual Learning

Progressive neural-collapse classifiers can learn strong task-local decision boundaries while failing the global Class-IL decision. We identify the failure as routing drift: under an expanding equiangular tight frame (ETF) classifier, a held-out sample can remain separable within its true task block, yet receive its largest global score from another block. This produces high Task-IL accuracy but low Class-IL accuracy, and small replay buffers can mask the problem because stored samples are optimized repeatedly and often remain well routed. We formalize route accuracy directly from the global class argmax and use it to separate within-task discrimination from cross-task score comparability. This decomposition suggests a classifier-level correction: preserve the global ETF frame, but add class-local reliability evidence when transported class measures deviate from the neural-collapse ideal. We develop Reliability-Calibrated Routing (RCR), a lightweight post-hoc classifier that composes standardized ETF alignment with radial plausibility around transported, NC-shrunk class representatives. Across three datasets and two fixed replay-buffer budgets, this NC-consistent correction gives the best Class-IL FAA on five of six settings and reduces Class-IL forgetting on all six. The largest gains occur in harder routing regimes: up to +6.75 FAA over the reported reference, and up to +8.03 FAA and +8.62 final route accuracy in paired evaluations, while preserving Task-IL performance. These results position routing drift as a measurable failure mode of ETF-based continual learning and show that reliability-calibrated class evidence can repair part of the lost global routing without retraining the representation. Code and evaluation artifacts are available at https://towzeur.github.io/RCR/.

  • 1 authors
·
Nov 16

SHERL: Synthesizing High Accuracy and Efficient Memory for Resource-Limited Transfer Learning

Parameter-efficient transfer learning (PETL) has emerged as a flourishing research field for adapting large pre-trained models to downstream tasks, greatly reducing trainable parameters while grappling with memory challenges during fine-tuning. To address it, memory-efficient series (METL) avoid backpropagating gradients through the large backbone. However, they compromise by exclusively relying on frozen intermediate outputs and limiting the exhaustive exploration of prior knowledge from pre-trained models. Moreover, the dependency and redundancy between cross-layer features are frequently overlooked, thereby submerging more discriminative representations and causing an inherent performance gap (vs. conventional PETL methods). Hence, we propose an innovative METL strategy called SHERL for resource-limited scenarios to decouple the entire adaptation into two successive and complementary processes. In the early route, intermediate outputs are consolidated via an anti-redundancy operation, enhancing their compatibility for subsequent interactions; thereby in the late route, utilizing minimal late pre-trained layers could alleviate the peak demand on memory overhead and regulate these fairly flexible features into more adaptive and powerful representations for new domains. Extensive ablations on vision-and-language and language-only tasks show that SHERL combines the strengths of both parameter and memory-efficient techniques, performing on-par or better across diverse architectures with lower memory during fine-tuning. Our code is publicly available at: https://github.com/Paranioar/SHERL.

  • 7 authors
·
Jul 10, 2024 2

CogniRoute: Learning to Route Social Evidence in Omni-Modal Models

Omni-modal models can ingest video, audio, and text, but unified access to multiple modalities does not guarantee that a model uses the right evidence. This gap is especially pronounced in social video question answering, where the answer may hinge on a gesture, vocal tone, temporal cue, or mismatch between what is said and what is visually expressed. We introduce CogniRoute, a schema-guided Mixture-of-Experts framework for social omni reasoning. CogniRoute uses a training-only cognitive schema that factorizes each example by cross-modal relation, reasoning demand, and temporal scope, and aligns global routing signatures with this structure during supervised fine-tuning. We further introduce route-aware reinforcement learning, which jointly optimizes token generation and expert allocation using rewards for answer correctness, modality-consistent reasoning, and cognitive temporal grounding. To support training and evaluation, we construct OmniSocialBench, a diagnostic social video QA resource with 118K structured training examples, grounded reasoning traces, schema labels, temporal evidence spans, and a manually verified evaluation split. CogniRoute achieves 59.38\% average accuracy on OmniSocialBench, improving over the strongest proprietary baseline by 15.33 percentage points and the strongest open-source omni baseline by 26.77 points, with the largest gains on questions requiring audio-visual coordination, conflict resolution, and temporally grounded social inference.

Lightning Weave: Improving the Accuracy-Efficiency Frontier of Reasoning Models through Capability Composition

A core goal of efficient reasoning is to improve the accuracy-efficiency frontier. However, jointly improving reasoning accuracy and inference efficiency can be challenging, as the two objectives can favor different reasoning behaviors. Independently post-trained models already offer distinct strengths in accuracy and efficiency. We introduce Lightning Weave, a post-training framework that extracts and composes these independently learned capabilities in a single student through on-policy distillation. Each acquired capability is represented by the policy shift from the model before post-training to the resulting specialist. Lightning Weave combines aligned log-ratio shifts at shared student token states and uses Tilted-Target DOPD to convert the cached signals into a stable learning target. Each anchor pair scores the cached trajectories once, enabling subsequent student training without serving multiple live anchor models concurrently. Across diverse student models and benchmarks in mathematics and code, Lightning Weave substantially improves upon the base students and achieves a state-of-the-art accuracy-efficiency frontier. On Qwen3.5-4B, it raises HMMT 2025 accuracy from 59.2% to 64.0% with 10.7% fewer response tokens, and LiveCodeBench v5 accuracy from 41.7% to 54.2% with 9.6% fewer response tokens. Adjusting the relative strengths of the anchor signals yields a strong empirical accuracy-efficiency Pareto frontier. These results establish Lightning Weave as a new practical route to efficient reasoning through capability composition. Code will be released soon.

  • 3 authors
·
Sep 12 2

S2HAND: Accuracy-Preservation Trade-Offs for Hand Specialization in Whole-Body Pose Models

Unified whole-body pose estimators jointly predict body, face, and hand landmarks, but often degrade on small, blurred, or occluded hands. Attaching a standalone hand specialist introduces extra detection overhead, coordinate alignment, and wrist-stitching artifacts. We introduce S2HAND, a hand-specialized Sapiens2-5B framework that preserves the native 308-keypoint output interface. Specifically, S2HAND-MT adapts a lightweight 0.87M-parameter pose branch to route 40 finger heatmaps while strictly preserving the shared Transformer, auxiliary task heads, and the other 268 body, foot, and face heatmaps. S2HAND-Pose further fine-tunes three Fisher-selected Transformer blocks (267.13M parameters), trading exact preservation for stronger hand recovery: it lifts macro AUC from 57.83% to 65.73% across HInt TEST, COCO WholeBody VAL, and FreiHAND EVAL, and surpasses HInt-adapted Hand5/HRNet and stitched Hand5 systems on all five Native Pipeline benchmarks. On COCO, S2HAND-Pose improves hand AP by 12.89 points and body-plus-foot AP by 0.19 points. Across a 512-image multi-task audit, it maintains 99.60% foreground segmentation agreement with the public checkpoint, with quantified normal and pointmap drift. Its 2D coordinates also lower 3D mesh error in frozen Pose2Mesh transfer, while our optional TailGuard re-cropping module cuts S2HAND-MT's severe failure rate on NewDays from 13.45% to 10.43%. S2HAND thus resolves the whole-body hand bottleneck with either exact non-hand preservation (MT) or empirically audited trade-offs (Pose).

  • 3 authors
·
Nov 6

Route-and-Reason: Scaling Large Language Model Reasoning with Reinforced Model Router

Chain-of-thought has been proven essential for enhancing the complex reasoning abilities of Large Language Models (LLMs), but it also leads to high computational costs. Recent advances have explored the method to route queries among multiple models and proved it as a promising approach. However, previous works directly operate at the task level, i.e., assigning user queries to suitable LLMs, which does not allow hybrid LLMs to truly collaborate on finer-grained sub-tasks. Collaboration at the level of intermediate reasoning steps (thoughts) could enable more efficient coordination, but it also poses significant challenges for router scheduling, placing immense demands on the quality of task decomposition and the precision of the router. To address this, we propose R2-Reasoner, a novel framework centered around a Reinforced Model Router designed to efficiently scale LLM reasoning. This router orchestrates collaboration across nine heterogeneous models, whose parameter scales range from less than 1B to hundreds of billions, by first breaking down a complex query into subtasks with a decomposer, and then assigning each subtask to the optimal model with a subtask allocator, balancing performance with cost. Training this router involves a two-stage alternating process for the decomposer and the allocator, integrating supervised fine-tuning with reinforcement learning to enable effective self-supervised refinement. Extensive experiments across six challenging reasoning benchmarks demonstrate that R2-Reasoner reduces API costs by 84.46% compared with state-of-the-art baselines while maintaining competitive reasoning accuracy. Our framework paves the way for the development of more scalable and efficient reasoning systems. Our code is open-source at https://anonymous.4open.science/r/R2_Reasoner.

  • 5 authors
·
Dec 3, 2025

Learning to Route Queries Across Knowledge Bases for Step-wise Retrieval-Augmented Reasoning

Multimodal Retrieval-Augmented Generation (MRAG) has shown promise in mitigating hallucinations in Multimodal Large Language Models (MLLMs) by incorporating external knowledge during generation. Existing MRAG methods typically adopt a static retrieval pipeline that fetches relevant information from multiple Knowledge Bases (KBs), followed by a refinement step. However, these approaches overlook the reasoning and planning capabilities of MLLMs to dynamically determine how to interact with different KBs during the reasoning process. To address this limitation, we propose R1-Router, a novel MRAG framework that learns to decide when and where to retrieve knowledge based on the evolving reasoning state. Specifically, R1-Router can generate follow-up queries according to the current reasoning step, routing these intermediate queries to the most suitable KB, and integrating external knowledge into a coherent reasoning trajectory to answer the original query. Furthermore, we introduce Step-wise Group Relative Policy Optimization (Step-GRPO), a tailored reinforcement learning algorithm that assigns step-specific rewards to optimize the reasoning behavior of MLLMs. Experimental results on various open-domain QA benchmarks across multiple modalities demonstrate that R1-Router outperforms baseline models by over 7%. Further analysis shows that R1-Router can adaptively and effectively leverage diverse KBs, reducing unnecessary retrievals and improving both efficiency and accuracy.

  • 11 authors
·
May 28, 2025

A Probabilistic Digital Twin of UK En Route Airspace for Training and Evaluating AI Agents for Air Traffic Control

This paper presents the first probabilistic Digital Twin of operational en route airspace, developed for the London Area Control Centre. The Digital Twin is intended to support the development and rigorous human-in-the-loop evaluation of AI agents for Air Traffic Control (ATC), providing a virtual representation of real-world airspace that enables safe exploration of higher levels of ATC automation. This paper makes three significant contributions: firstly, we demonstrate how historical and live operational data may be combined with a probabilistic, physics-informed machine learning model of aircraft performance to reproduce real-world traffic scenarios, while accurately reflecting the level of uncertainty inherent in ATC. Secondly, we develop a structured assurance case, following the Trustworthy and Ethical Assurance framework, to provide quantitative evidence for the Digital Twin's accuracy and fidelity. This is crucial to building trust in this novel technology within this safety-critical domain. Thirdly, we describe how the Digital Twin forms a unified environment for agent testing and evaluation. This includes fast-time execution (up to x200 real-time), a standardised Python-based ``gym'' interface that supports a range of AI agent designs, and a suite of quantitative metrics for assessing performance. Crucially, the framework facilitates competency-based assessment of AI agents by qualified Air Traffic Control Officers through a Human Machine Interface. We also outline further applications and future extensions of the Digital Twin architecture.

  • 14 authors
·
Jan 5

CANTraj: Recovering Vehicle Trajectories from CAN Signals in Naturalistic Driving

Open driving releases and usage-based insurance programs often claim to prevent privacy breaches by omitting GPS records when sharing or collecting vehicle data. However, removing GPS coordinates from driving logs does not erase the location information carried by vehicle signals. While prior route-inference attacks have demonstrated that speed, steering, and driving events can be matched to road networks to reconstruct trajectories, existing studies rely on inconsistent prior assumptions and evaluation metrics and are tested only on small, restricted datasets, making their results difficult to compare and their real-world effectiveness uncertain. We release CANTraj, a naturalistic driving dataset pairing decoded CAN events with time-aligned GNSS trajectories (3,940 drives, 454 drivers), and CANTraj-Bench for evaluating trajectory recovery (3,675 drives, 431 drivers, 1,380 hours, 85,919 km). On 776 evaluation drives from 94 unseen drivers, we compare six re-implemented attacks and benchmark baselines under explicit information-access protocols, paired comparisons, and metrics incorporating failures. Experiments show that combining steering signals with road-network constraints yields the largest gain: With a known start and heading, adding steering to speed raises the online map filter's five-minute route recovery from 56% to 87%, with a median average displacement error of 43 m versus 921 m for map-free dead reckoning. Offline beam search recovers 88% of test routes with the heading and 81% without it. Because methods fail on different windows, we also evaluate an LLM harness that selects among candidate routes on 659 five-minute windows; its best configuration recovers 79% of routes on test and 83% on few-shot, outperforming the best baseline on test and matching it on few-shot. Data and code at huggingface.co/datasets/HenryYHW/CANTraj and github.com/WangYuHang-cmd/GPS--CAN.

MOTIF-Lab MOTIF-LAB
·
Nov 12 2

The Right Memory in the Wrong Context: Verifying Retrieval Admissibility in Long-Term Agent Memory

Long-term-memory agents can retrieve relevant information that is inadmissible for the current request because it belongs to another principal, violates policy, or reflects an incompatible lifecycle state. Recall and final-answer accuracy do not reveal this: a route can appear safe by missing required evidence, while a correct answer may follow inadmissible prompt exposure. We introduce a retrieval-admissibility verification framework that assigns each memory-query pair one of three statuses (admissible, inadmissible, or unresolved), compares routes at matched required-evidence recall with bounds for unresolved cases, and tracks memory IDs through prompt exposure while linking exposure to target-level disclosure. We evaluate its stages on separate, non-pooled populations. A post-hoc top-20 reanalysis of frozen rankings from two public long-term-memory benchmarks, RHELM and MemOps, covers 3,767 queries. All released anchors lie within trusted query namespaces; with within-namespace scores unchanged, off-namespace filtering cannot lower their ranks. Top-20 anchor recall increases from 0.432 to 0.533, 80% recall feasibility from 0.237 to 0.311, and exact similarity evaluations decrease by 98.3%. In a frozen 72-case development diagnostic, a released-metadata reference preserves required evidence, whereas neither text-only verifier detects violations under the 1% required-anchor false-denial limit. Across 1,523 paired benchmark-native cases, namespace routing is associated with judged-accuracy gains of 0.053-0.068 across three readers; recall also changes, so this comparison is observational. In 16 controlled exposure scenarios, only one of four reader-specific 95% confidence intervals excludes zero for relevant-inadmissible literal disclosure (+0.156, 95% CI [0.031, 0.312]). Results motivate separate verification of candidate support, admissibility, prompt exposure, and answer disclosure.

  • 5 authors
·
Oct 4

When Does Multi-Agent RL Improve LLM Workflows? Workflow, Scale, and Policy-Sharing Tradeoffs

Multi-agent LLM workflows route inference through specialized roles to lift end-task accuracy, but jointly training those roles with reinforcement learning is unstable in ways that are poorly understood. We study when end-to-end RL training of multi-agent LLM workflows improves over their base models, comparing Shared-Policy training, where all roles update one policy, with Isolated-Policy training, where each role has its own parameters. Our experimental matrix spans Eval-Opt, Voting, and Orch-Workers workflows, math and code tasks, and three model scales (0.6B, 1.7B, 4B). We find that multi-agent RL usually improves over base models, but gains depend jointly on workflow, task, and scale, not on policy sharing alone. Isolated-Policy tends to reach higher peak accuracy yet more often falls off a terminal accuracy cliff, while Shared-Policy training does not eliminate failure; it redistributes failure into qualitatively different patterns. We then explain the strongest of these patterns through role-level gradient dynamics induced by workflow topology and policy routing: under Isolated-Policy, parallel same-role agents on shared prompts amplify per-role gradients and drive terminal degradation in Voting and Orch-Workers workflows; under Shared-Policy, asymmetric per-step gradient mass causes the shared policy to be captured by the dominant role, producing different failure signatures by task and workflow. Together, the empirical map and its underlying mechanisms show that policy sharing routes training pressure through different channels rather than offering uniform stability, making it a design choice with workflow- and task-conditional tradeoffs.

DriveDNA: A Large-Scale Multimodal Naturalistic Driving Dataset and Benchmark for Driving Style Identification

Driving style captures stable, driver-specific patterns in how a vehicle is driven. In naturalistic data, however, this signal is hard to isolate because drivers are observed in different vehicles, on different roads, and under different conditions, so models may mistake vehicle- or situation-specific regularities for driver-specific style. We introduce DriveDNA, a large-scale naturalistic dataset and benchmark for personalized driving-style modeling, comprising 4,121 drives from 465 drivers across 115 vehicle models and totaling 975 hours of human-controlled driving at 10 Hz with forward video, collected from community drivers in everyday use. DriveDNA defines driving style as a consistent, driver-specific behavioral pattern in how a vehicle moves under similar conditions. The benchmark evaluates this signal through three core tasks: few-shot driver re-identification, personalized behavior prediction, and condition-matched comparison, and provides behavioral annotations plus 276,248 rule-generated maneuver events across six classes with large-scale human auditing. We evaluate baselines spanning classical descriptors, supervised and self-supervised time-series encoders, multimodal fusion, probabilistic prediction, and zero-shot foundation models under a fixed multi-seed protocol. Learned representations substantially outperform classical descriptors on unseen drivers (AUROC .935 vs. .707) and retain driver-specific information under matched driving conditions, while descriptor performance approaches chance. Video-only models achieve comparable re-identification accuracy but exhibit severe route leakage, showing that strong recognition may arise from contextual shortcuts rather than driving behavior. These findings show that reliable driving-style evaluation must assess both the behavioral value of learned representations and their robustness to vehicle, drive, and condition confounds.

MOTIF-Lab MOTIF-LAB
·
Jul 25 2

Ventor-QTest: Threat-Model-Driven Verification of Vendor-Hosted LLM APIs

As large language models become increasingly widespread, third-party providers that deploy open-weight models have become an important part of the ecosystem. Auditing the quality of their inference APIs is therefore an open problem. We formalize hosted model routing as a stochastic process and propose \textbf{Ventor-QTest}, a composite black-box audit that requires no probability information from the target API. Its repeated-request component sends each frozen constrained context to the target multiple times, reconstructs a categorical output distribution from the returned text counts, and reports average fidelity loss (AFL) as a null-bias-corrected, within-window mean coarsened-KL statistic. Its long-sequence component uses independent runs to report extreme fidelity loss (EFL) through the empirical upper tail of a run-level reference-centered-surprisal statistic. Across three logprob-capable route conditions, AFL shows strong linear descriptive agreement with a logprob-derived coarsened-KL comparator. Across seven route snapshots, 20-run sequence probes reveal route-specific EFL variation. AFL and EFL have little detectable route-level association with GPQA-Diamond accuracy. In contrast, pronounced EFL coincides with a decline in Terminal-Bench pass rate as task exposure increases. This pattern may arise because correctness in long-horizon tasks is more sensitive to extreme fidelity loss. These results motivate reporting AFL and EFL jointly, particularly when auditing long-horizon agentic tasks. The open-source implementation is available at https://github.com/Tencent/AI-Infra-Guard/tree/main/services/api_checker/ventor_qtest.

tencent Tencent
·
Aug 16 2

Adaptive Vision-Language Model Routing for Computer Use Agents

Computer Use Agents (CUAs) translate natural-language instructions into Graphical User Interface (GUI) actions such as clicks, keystrokes, and scrolls by relying on a Vision-Language Model (VLM) to interpret screenshots and predict grounded tool calls. However, grounding accuracy varies dramatically across VLMs, while current CUA systems typically route every action to a single fixed model regardless of difficulty. We propose Adaptive VLM Routing (AVR), a framework that inserts a lightweight semantic routing layer between the CUA orchestrator and a pool of VLMs. For each tool call, AVR estimates action difficulty from multimodal embeddings, probes a small VLM to measure confidence, and routes the action to the cheapest model whose predicted accuracy satisfies a target reliability threshold. For warm agents with memory of prior UI interactions, retrieved context further narrows the capability gap between small and large models, allowing many actions to be handled without escalation. We formalize routing as a cost--accuracy trade-off, derive a threshold-based policy for model selection, and evaluate AVR using ScreenSpot-Pro grounding data together with the OpenClaw agent routing benchmark. Across these settings, AVR projects inference cost reductions of up to 78\% while staying within 2 percentage points of an all-large-model baseline. When combined with the Visual Confused Deputy guardrail, AVR also escalates high-risk actions directly to the strongest available model, unifying efficiency and safety within a single routing framework. Materials are also provided Model, benchmark, and code: https://github.com/vllm-project/semantic-router.

  • 6 authors
·
Mar 12

Adding Temperature to the Adiabatic Connection: Hybrid Functionals for Static and Dynamic Correlation

Capturing static and dynamic electron correlation simultaneously at manageable computational cost remains a key challenge in electronic structure theory. Motivated by the recurring role of effective temperature in self-consistent field methods we extend the adiabatic connection mechanism from density functional theory to include a temperature dimension. This gives rise to thermally enhanced hybrid functionals, in which static correlation is captured via fractional occupations generated by an effective "correlation temperature" within thermal Hartree-Fock, while dynamic correlation is described by established density functional approximations. The framework formally unifies information-density matrix functional theory (i-DMFT) and thermally-assisted-occupation (TAO-)DFT as special cases, clarifying their theoretical basis and the respective prescriptions for the temperature parameter. We assess the performance of several thermally enhanced hybrids for different cases where i-DMFT was previously shown to fail. Furthermore, we discuss and test different schemes for determining the correlation temperature and investigate the accuracy of different such choices for a benchmark set derived from biphenyl. The results help to clarify the achievable balance of accuracy, generality, and efficiency, establishing thermally enhanced hybrids as a systematic route toward low-cost treatment of both correlation types.

  • 4 authors
·
Oct 14

Learning to Reason with Compressed Context: Ground-Truth-Free Adaptation of OmniLLMs via Self-Distillation

Omni-modal large language models (OmniLLMs) enable unified audio-video understanding, but their long multimodal token sequences make deployment computationally expensive. Token compression reduces this cost, yet aggressive compression often lowers accuracy. Existing works predominantly focus on designing better compression mechanisms; however, adapting the underlying language model to reason effectively over the remaining compressed context remains under-explored. To address this, we propose CAFD (Compressed-Context Adaptation via Full-Context Distillation), a ground-truth-free self-distillation framework that adapts OmniLLMs to fixed compression pipelines without requiring reference answers, rationales, or correctness rewards. CAFD leverages the full-token view of the same multimodal sample as a source of privileged information: a full-context self-teacher provides soft target supervision to a compressed-context student along the student's on-policy trajectory. Evaluated on Qwen2.5-Omni-7B across five audio-video benchmarks, five compression pipelines, and five deployment budgets, CAFD demonstrates consistent gains, improving 120 out of 125 conditions with an average accuracy boost of 1.44 points and recovering 26.9% of the accuracy gap on average. These results demonstrate that the proposed ground-truth-free adaptation offers an effective and practical route to improving the accuracy-efficiency trade-off in deployed OmniLLMs.

  • 10 authors
·
Sep 30

DMAIC-Bench: From Self-Reflection to Self-Restraint for Agents in Multi-Stage Analytical Tasks

Multi-stage analytical tasks require LLM agents to use intermediate evidence to decide whether to continue, redirect or stop. Self-reflection, in which an agent critiques its output, is widely studied, yet a critique does not show whether evidence changed the next action. We call that capability self-restraint. Existing agent benchmarks largely measure task completion or output quality and leave it untested. DMAIC-Bench evaluates it with 97 seeded tasks across 15 industrial cases in four sectors, built around Lean Six Sigma's explicit statistical prerequisites. Paired counterfactual variants require opposite actions at the same workflow position, distinguishing warranted restraint from indiscriminate stopping. We assess execution traces with a private scorer and final claims through independent expert review. Across 13 models from six providers, execution-level routing accuracy averages 92% on matched GO decisions and 19% on NO-GO decisions, counting any forbidden downstream computation as a route error. Execution traces show agents reporting correct diagnostics before performing analyses that those results disallow. Separately, blinded expert review of the 11 audited agents estimates that reports act on invalid evidence at 47% of reached NO-GO decisions, with an interval from 31% to 61%. Explicit stopping permission helps some models without consistently restoring correct decisions at both GO and NO-GO forks. Sixteen life-sciences tasks in bulk ribonucleic acid sequencing (RNA-seq) and case-control genome-wide association studies (GWAS) show that the same framework can evaluate evidence-dependent decisions beyond industrial workflows. Project code and data are available at: https://github.com/psptpx/DMAIC-Bench-public.

  • 5 authors
·
Oct 23

IntTravel: A Real-World Dataset and Generative Framework for Integrated Multi-Task Travel Recommendation

Next Point of Interest (POI) recommendation is essential for modern mobility and location-based services. To provide a smooth user experience, models must understand several components of a journey holistically: "when to depart", "how to travel", "where to go", and "what needs arise via the route". However, current research is limited by fragmented datasets that focus merely on next POI recommendation ("where to go"), neglecting the departure time, travel mode, and situational requirements along the journey. Furthermore, the limited scale of these datasets impedes accurate evaluation of performance. To bridge this gap, we introduce IntTravel, the first large-scale public dataset for integrated travel recommendation, including 4.1 billion interactions from 163 million users with 7.3 million POIs. Built upon this dataset, we introduce an end-to-end, decoder-only generative framework for multi-task recommendation. It incorporates information preservation, selection, and factorization to balance task collaboration with specialized differentiation, yielding substantial performance gains. The framework's generalizability is highlighted by its state-of-the-art performance across both IntTravel dataset and an additional non-travel benchmark. IntTravel has been successfully deployed on Amap serving hundreds of millions of users, leading to a 1.09% increase in CTR. IntTravel is available at https://github.com/AMAP-ML/IntTravel.

  • 7 authors
·
Feb 12

Towards Full Candidate Interaction: A Comprehensive Comparison Network for Better Route Recommendation

Route Recommendation (RR) is a core task in route planning within online navigation applications, aiming to recommend the optimal route among candidate routes to users. Industrially, RR adopts the two-stage recall-and-rank framework instead of traditional route planning algorithms primarily for computational efficiency. However, RR fundamentally differs from traditional recommendation systems that follow this paradigm. First, a primary challenge is that route items cannot be assigned unique identifiers. Additionally, RR fundamentally differs from traditional recommendation systems in its approach to feature interaction. These differences render conventional recommendation approaches inadequate for route recommendation scenarios, necessitating specialized methods that can effectively handle route-specific challenges. To address these challenges, we propose a novel method called Comprehensive Comparison Network (CCN) for route recommendation. CCN constructs comparative features by comparing non-overlapping segments between route pairs, enabling difference learning without the infinite scalability issues of ID embeddings. Furthermore, CCN employs a specially designed Comprehensive Comparison Block (CCB) that differs from previous item attention methods to achieve effective cross-interaction between routes using comparison-level features. Moreover, we develop an interpretable Pair Scoring Network (PSN) for route recommendation and introduce a more comprehensive route recommendation dataset to advance research in this field. Experimental results demonstrate the effectiveness of our method, and CCN has been successfully deployed in AMAP for over a year, demonstrating its value in route recommendation.

  • 6 authors
·
Feb 2

GenMRP: A Generative Multi-Route Planning Framework for Efficient and Personalized Real-Time Industrial Navigation

Existing industrial-scale navigation applications contend with massive road networks, typically employing two main categories of approaches for route planning. The first relies on precomputed road costs for optimal routing and heuristic algorithms for generating alternatives, while the second, generative methods, has recently gained significant attention. However, the former struggles with personalization and route diversity, while the latter fails to meet the efficiency requirements of large-scale real-time scenarios. To address these limitations, we propose GenMRP, a generative framework for multi-route planning. To ensure generation efficiency, GenMRP first introduces a skeleton-to-capillary approach that dynamically constructs a relevant sub-network significantly smaller than the full road network. Within this sub-network, routes are generated iteratively. The first iteration identifies the optimal route, while the subsequent ones generate alternatives that balance quality and diversity using the newly proposed correctional boosting approach. Each iteration incorporates road features, user historical sequences, and previously generated routes into a Link Cost Model to update road costs, followed by route generation using the Dijkstra algorithm. Extensive experiments show that GenMRP achieves state-of-the-art performance with high efficiency in both offline and online environments. To facilitate further research, we have publicly released the training and evaluation dataset. GenMRP has been fully deployed in a real-world navigation app, demonstrating its effectiveness and benefits.

  • 9 authors
·
Feb 3

SCASRec: A Self-Correcting and Auto-Stopping Model for Generative Route List Recommendation

Route recommendation systems commonly adopt a multi-stage pipeline involving fine-ranking and re-ranking to produce high-quality ordered recommendations. However, this paradigm faces three critical limitations. First, there is a misalignment between offline training objectives and online metrics. Offline gains do not necessarily translate to online improvements. Actual performance must be validated through A/B testing, which may potentially compromise the user experience. Second, redundancy elimination relies on rigid, handcrafted rules that lack adaptability to the high variance in user intent and the unstructured complexity of real-world scenarios. Third, the strict separation between fine-ranking and re-ranking stages leads to sub-optimal performance. Since each module is optimized in isolation, the fine-ranking stage remains oblivious to the list-level objectives (e.g., diversity) targeted by the re-ranker, thereby preventing the system from achieving a jointly optimized global optimum. To overcome these intertwined challenges, we propose SCASRec (Self-Correcting and Auto-Stopping Recommendation), a unified generative framework that integrates ranking and redundancy elimination into a single end-to-end process. SCASRec introduces a stepwise corrective reward (SCR) to guide list-wise refinement by focusing on hard samples, and employs a learnable End-of-Recommendation (EOR) token to terminate generation adaptively when no further improvement is expected. Experiments on two large-scale, open-sourced route recommendation datasets demonstrate that SCASRec establishes an SOTA in offline and online settings. SCASRec has been fully deployed in a real-world navigation app, demonstrating its effectiveness.

  • 8 authors
·
May 7

Propagating Elevation-Map Uncertainty Through the Contact Maximum in Closed Form

Risk-aware planners score paths on uncertain elevation maps using the path cost's mean and standard deviation. Modeling rigid contact, however, requires computing a maximum over several uncertain cells. First-order propagation loses accuracy here by differentiating at only a single cell, while Monte Carlo sampling requires a full path evaluation per draw. We compute the moments of that contact maximum in closed form using Clark's pairwise recursion. By tracking each contact's covariance against the shared map cells, we propagate the smooth remainder using exact Gaussian quadratic-form identities. A contest-depth calibration, fitted once on two design traverses, closes the aggregate standard-deviation shortfall that remains. On 317 held-out rover path segments, scored against a Monte Carlo reference from the same belief, every pre-registered criterion was met. The corrected Clark fold cuts the median error of the mean from linearization's 2.3% to 0.19% and attains the lowest error in the conditional value at risk (CVaR) at the 90% level of every method tested. A benchmark plan costs just 5.5 microseconds on a GPU. These accuracy gains concentrate at contested contacts. While they seldom change which path is chosen on this terrain, the fold still selects the reference-best path in 98% of decisions against linearization's 93 to 96%. On a second dataset the mean transfers, though the risk number does not.

  • 2 authors
·
Oct 4

TrajPrism: A Multi-Task Benchmark for Language-Grounded Urban Trajectory Understanding

Urban mobility is naturally expressed both as trajectories in space and as natural-language descriptions of travel intent, constraints, and preferences. However, prior work rarely evaluates these two modalities together on the same real-world trajectories: trajectory modeling often stays geometry-centric, while language-centric mobility benchmarks frequently target route planning and tool use rather than fine-grained, verifiable alignment between text and the underlying route. We introduce TrajPrism, a multi-task benchmark for language-trajectory alignment that unifies (i) instruction-conditioned trajectory generation, (ii) language-driven semantic trajectory retrieval, and (iii) trajectory captioning, together with an evaluation protocol that measures trajectory fidelity, retrieval quality, and language groundedness. We construct TrajPrism by pairing real urban trajectories with judge-filtered language annotations generated under a four-dimensional travel-intent taxonomy. The benchmark contains 300K selected trajectories across Porto, San Francisco, and Beijing, yielding 2.1M task instances from three instruction variants, three retrieval queries, and one caption per trajectory. We further develop proof-of-concept models for each task: TrajAnchor for instruction-conditioned trajectory generation, TrajFuse for semantic trajectory retrieval, and TrajRap for trajectory captioning. These models instantiate the proposed tasks and show that geometry-only trajectory baselines leave a large gap on our protocol, especially where language is part of the input-output interface. We release TrajPrism with code and a reproducible annotation pipeline that is designed to be portable across cities, given compatible trajectory inputs and map resources.

  • 9 authors
·
May 10

An RTK-SLAM Dataset for Absolute Accuracy Evaluation in GNSS-Degraded Environments

RTK-SLAM systems integrate simultaneous localization and mapping (SLAM) with real-time kinematic (RTK) GNSS positioning, promising both relative consistency and globally referenced coordinates for efficient georeferenced surveying. A critical and underappreciated issue is that the standard evaluation metric, Absolute Trajectory Error (ATE), first fits an optimal rigid-body transformation between the estimated trajectory and reference before computing errors. This so-called SE(3) alignment absorbs global drift and systematic errors, making trajectories appear more accurate than they are in practice, and is unsuitable for evaluating the global accuracy of RTK-SLAM. We present a geodetically referenced dataset and evaluation methodology that expose this gap. A key design principle is that the RTK receiver is used solely as a system input, while ground truth is established independently via a geodetic total station. This separation is absent from all existing datasets, where GNSS typically serves as (part of) the ground truth. The dataset is collected with a handheld RTK-SLAM device, comprising two scenes. We evaluate LiDAR-inertial, visual-inertial, and LiDAR-visual-inertial RTK-SLAM systems alongside standalone RTK, reporting direct global accuracy and SE(3)-aligned relative accuracy to make the gap explicit. Results show that SE(3) alignment can underestimate absolute positioning error by up to 76\%. RTK-SLAM achieves centimeter-level absolute accuracy in open-sky conditions and maintains decimeter-level global accuracy indoors, where standalone RTK degrades to tens of meters. The dataset, calibration files, and evaluation scripts are publicly available at https://rtk-slam-dataset.github.io/.

  • 5 authors
·
Apr 7

The Path Matters: Evaluating Small Language Models Beyond Answer Accuracy in KGQA

Small language models (SLMs) are increasingly paired with knowledge graphs (KGs), yet end-to-end KG question answering conflates graph access, search, navigation, reasoning, and answer generation. This coupling makes it difficult both to determine whether an SLM can faithfully execute the reasoning path implied by a question and to attribute failures to navigation rather than to other stages of the pipeline. We isolate this capability by employing the THESEUS navigation and traceability framework and using frozen, off-the-shelf SLMs as local action policies. At each hop, the environment exposes the legal outgoing graph actions, and the model selects one executable graph action and decides whether to stop, without task-specific parameter updates, model-controlled beam search, or free-form answer generation. This controlled setting allows us to evaluate terminal-answer accuracy with Hits@1 together with path fidelity, using Path Edit Distance (PED) as the primary trajectory metric. Across the Kinship and MQuAKE-ST KGQAs, similarly sized local models differ substantially in answer accuracy and path fidelity, with the two metrics sometimes favoring different models. This model-dependent behavior also extends to prompting, as a single demonstrated trajectory can improve or degrade navigation depending on the model. These results motivate evaluating SLM graph reasoning beyond endpoint accuracy alone.

RetrievalRouter: Joint Modality and Architecture Selection for Document Retrieval

Document retrieval increasingly supports high-stakes information access in finance, healthcare, and law. Modern retrieval pipelines vary both in modality (text or multimodal) and in retrieval architecture (dense or late-interaction). These choices impose a hard compromise: the most effective pipelines are too slow and expensive to run at scale, while the fastest fail to retrieve evidence from complex documents. Practitioners must therefore choose between missed evidence and unusable latency, with no principled basis for adapting that choice at the query level. We show that this compromise is unnecessary. Not every query requires the same pipeline. Across benchmarks spanning financial and scientific corpora, no static pipeline dominates. We introduce RetrievalRouter, a lightweight query-aware router that learns, from the query text alone, which retrieval pipeline best fits each query. A single tunable parameter exposes the full accuracy-latency frontier, and for every static baseline, RetrievalRouter offers an operating point that is simultaneously more accurate and faster. Against the best static baseline, RetrievalRouter is 2.5% more accurate and 12.4 times faster. Furthermore, compared with prior adaptive strategy selection methods, RetrievalRouter achieves significantly higher nDCG@5 across accuracy-oriented settings, while matching or numerically outperforming them on both nDCG@5 and latency in latency-oriented settings. Our code and data are available at https://github.com/emrekuruu/retrieval-router.

  • 4 authors
·
Aug 25 2

SeLMRoute: Probabilistic Semantic Evidence for Large Language Model Routing

Large language model (LLM) routing aims to select the most suitable model for each incoming query. Most existing routers learn this decision directly from query embeddings, model representations, preference data, or clusters of similar examples. Such approaches can be effective, yet the representation used for routing rarely states what a query actually requires. We introduce SeLMRoute, a routing framework that separates the extraction of candidate-independent semantic evidence from the learning of candidate performance and the application of deployment objectives. A decision model first evaluates a set of interpretable questions about the query, such as its reasoning requirements and use of external knowledge, with each judgment retained as a probability distribution. The resulting probabilistic semantic state is used by a lightweight supervised router to estimate candidate model performance. Routing objectives are applied after performance estimation, which allows the same semantic state to support performance-oriented and cost-aware decisions. On the LLMRouterBench (15 datasets, 20 candidate models, 11,481 queries), SeLMRoute achieves an average accuracy of 72.08% pm 0.45, while grouped five-fold out-of-fold evaluation reaches 72.64%, compared with 69.23% for the strongest fixed candidate. The representation achieves the highest mean performance among the evaluated semantic, dense, lexical, and domain-level representations. In a separate 13-model performance-cost setting, SeLMRoute improves performance in all five grouped splits, with a mean PerfGain of 2.66%. Our code is available at https://github.com/Indigma-Innovations/SeLMRoute.

APE: An Open and Shared Annotated Dataset for Learning Urban Pedestrian Path Networks

Inferring the full transportation network, including sidewalks and cycleways, is crucial for many automated systems, including autonomous driving, multi-modal navigation, trip planning, mobility simulations, and freight management. Many transportation decisions can be informed based on an accurate pedestrian network, its interactions, and connectivity with the road networks of other modes of travel. A connected pedestrian path network is vital to transportation activities, as sidewalks and crossings connect pedestrians to other modes of transportation. However, information about these paths' location and connectivity is often missing or inaccurate in city planning systems and wayfinding applications, causing severe information gaps and errors for planners and pedestrians. This work begins to address this problem at scale by introducing a novel dataset of aerial satellite imagery, street map imagery, and rasterized annotations of sidewalks, crossings, and corner bulbs in urban cities. The dataset spans 2,700 km^2 land area, covering select regions from 6 different cities. It can be used for various learning tasks related to segmenting and understanding pedestrian environments. We also present an end-to-end process for inferring a connected pedestrian path network map using street network information and our proposed dataset. The process features the use of a multi-input segmentation network trained on our dataset to predict important classes in the pedestrian environment and then generate a connected pedestrian path network. Our results demonstrate that the dataset is sufficiently large to train common segmentation models yielding accurate, robust pedestrian path networks.

  • 4 authors
·
Mar 3, 2023

Making Agents More Consistent: Skills Should Form Habits for Repeat Tasks

On repeated work, agents are inconsistent. We ran 42 tasks three times each and found that, depending on the model, 38% to 74% returned answers that did not agree. Consistency is what a buyer, an auditor, or a regulator requires, and agents do not have it. They are wasteful too: 95.3% to 97.2% of what an agent generates goes to re-deriving a plan the system already knows. We propose skill habit formation. An agent mines its own execution history for candidate skills, deterministic variants that compete against the incumbent rather than replacing it. A candidate declares the region of input space it claims, so the common case runs as a script and the rest falls through to reasoning. Four gates of ascending cost admit candidates; the central one tests a candidate's execution trace against a retained reference, within a tolerance measured from that reference's own run-to-run variability. On text-to-SQL, three of four reasoning arms reproduced their own output on 11 to 13 of 42 repeated questions and the fourth on 26 of 42, while a habit-formed variant reproduced on all 456 dispatches we repeated and was non-inferior to every arm it replaced (p<0.0001). It also used 14% to 56% fewer tokens, turning net positive after 7 to 53 reuses. We measured what this costs in accuracy. The guard admitted work it should have deferred on 2.6% of natural paraphrases and 26% of inputs near its boundary, and 11 of 13 such failures were invisible to the trace-conformance gate at any threshold. Deterministic errors repeat exactly: a bad habit is as reliable as a good one, and that is the price of the property that makes the system auditable. Separating routing from parameter extraction raised end-to-end accuracy from 0.888 to 0.952 at 43% of the cost.

  • 2 authors
·
Sep 20

Unify Change Point Detection and Segment Classification in a Regression Task for Transportation Mode Identification

Identifying travelers' transportation modes is important in transportation science and location-based services. It's appealing for researchers to leverage GPS trajectory data to infer transportation modes with the popularity of GPS-enabled devices, e.g., smart phones. Existing studies frame this problem as classification task. The dominant two-stage studies divide the trip into single-one mode segments first and then categorize these segments. The over segmentation strategy and inevitable error propagation bring difficulties to classification stage and make optimizing the whole system hard. The recent one-stage works throw out trajectory segmentation entirely to avoid these by directly conducting point-wise classification for the trip, whereas leaving predictions dis-continuous. To solve above-mentioned problems, inspired by YOLO and SSD in object detection, we propose to reframe change point detection and segment classification as a unified regression task instead of the existing classification task. We directly regress coordinates of change points and classify associated segments. In this way, our method divides the trip into segments under a supervised manner and leverage more contextual information, obtaining predictions with high accuracy and continuity. Two frameworks, TrajYOLO and TrajSSD, are proposed to solve the regression task and various feature extraction backbones are exploited. Exhaustive experiments on GeoLife dataset show that the proposed method has competitive overall identification accuracy of 0.853 when distinguishing five modes: walk, bike, bus, car, train. As for change point detection, our method increases precision at the cost of drop in recall. All codes are available at https://github.com/RadetzkyLi/TrajYOLO-SSD.

  • 2 authors
·
Dec 7, 2023

GPT-6-Astra Lights Up Embodied Navigation: Evaluation in Zero-Shot Vision-and-Language Navigation in Continuous Environments

We investigate whether GPT-6-Astra, a general-purpose foundation model, can navigate unfamiliar environments using its own perception, reasoning, and decision-making capabilities. Our evaluation focuses on zero-shot vision-and-language navigation in continuous environments (VLN-CE) through a minimal interface in the Codex harness, aiming to unleash GPT-6-Astra's full potential for navigation. Using monocular RGB, GPT-6-Astra decides when to observe, how to move, and when to stop, without navigation-specific fine-tuning, a trained waypoint predictor, or a pre-built scene map. Our evaluation yields four key findings and implications. First, GPT-6-Astra achieves strong zero-shot navigation performance using only monocular RGB observations. On R2R-CE-100, GPT-6-Astra (ultra reasoning) achieves a success rate of 81.3%, exceeding the strongest reported zero-shot and even train-based success rates by 15.3 and 9.2 percentage points, respectively. Second, GPT-6-Astra exhibits promising capabilities in interpreting multi-stage instructions, understanding the environment, and adjusting routes. Third, execution and goal-verification failures persist even with ultra reasoning. Fourth, these results motivate combining general-purpose model capabilities with navigation-specific expertise. Based on these findings, future VLN research should investigate which aspects of instruction interpretation, spatial understanding, and navigation decision-making general-purpose models can handle directly, and where navigation-specific learning can extend their capabilities. This includes exploring how spatial representations, navigation experience, and learned control skills can improve progress tracking, error recovery, and goal verification while preserving the flexibility to adjust routes.

  • 4 authors
·
Sep 24

Routing Drift Alone Does Not Diagnose Failure in Merged MoE LLMs

Model merging efficiently combines specialized large language models (LLMs) without joint retraining, but can substantially alter expert routing in Mixture-of-Experts (MoE) models. Such routing drift is often interpreted as routing failure, raising a fundamental question that remains unclear: does routing drift after MoE merging actually indicate routing failure, and what evidence should justify repair? We investigate these questions across DeepSeekMoE, OLMoE, and Qwen3-MoE proposing a routing analysis toolkit for controlled counterfactual interventions and token-level analysis. By crossing source and merged router inputs and parameters, we attribute most expert reassignments to input shifts rather than parameter changes at the same layer. However, source-relative routing differences poorly predict next-token likelihood gains from source-route restoration, and different expert selections can produce directionally similar mixture outputs. We therefore operationalize routing failure as task loss recoverable under a specified routing intervention, with non-routing parameters fixed. These tests detect recoverable loss under deliberate router corruption, whereas source-route restoration does not establish reliable task benefits in the evaluated merged models. Motivated by these, we propose Selective Router Repair (SRR) as a case study, and find that source-specialist token-likelihood advantages do not reliably identify beneficial local corrections. Together, these findings show that routing drift alone is insufficient evidence of routing failure: source-informed corrections must be judged by their task-level intervention effects. The analysis toolkit and SRR code are released.

Safety-Flag: A Unified Benchmark for the Reliability and Calibration of LLM Content Moderators

Large language models are increasingly used for content moderation, but most evaluations still report aggregate accuracy on individual benchmarks. We introduce Safety-Flag, which places seven widely used safety benchmarks (BeaverTails, XSTest, Ethics, WildGuard, Aegis, ToxiChat, and ToxiGen) into a single balanced flag / do-not-flag protocol. We release item-level decisions and confidence scores for six general-purpose LLMs and four dedicated guards, together with three reference models, evaluated on the same items. Safety-Flag measures three dimensions of moderator reliability: error direction, probability calibration, and confidence-based error ranking for human review. They often disagree. Aggregate accuracy does not reveal error direction: one model flags 85% of benign content, whereas another misses 54% of harmful content. All six general-purpose models are overconfident; fitting one temperature per model reduces calibration error by 2.8--6.0times without changing predicted labels or confidence ordering. Confidence-based abstention lowers selective risk for every model, although the gains depend on how well confidence ranks errors. Dedicated guards produce fewer false alarms and are better calibrated, but several have higher miss rates outside their documented coverage. We release the benchmark, fixed item lists, evaluation code, per-item model outputs, and leaderboard at: https://github.com/yibo-hu-lab/safety-flag-benchmark.

  • 1 authors
·
Aug 5

NeSy-Route: A Neuro-Symbolic Benchmark for Constrained Route Planning in Remote Sensing

Remote sensing underpins crucial applications such as disaster relief and ecological field surveys, where systems must understand complex scenes and constraints and make reliable decisions. Current remote-sensing benchmarks mainly focus on evaluating perception and reasoning capabilities of multimodal large language models (MLLMs). They fail to assess planning capability, stemming either from the difficulty of curating and validating planning tasks at scale or from evaluation protocols that are inaccurate and inadequate. To address these limitations, we introduce NeSy-Route, a large-scale neuro-symbolic benchmark for constrained route planning in remote sensing. Within this benchmark, we introduce an automated data-generation framework that integrates high-fidelity semantic masks with heuristic search to produce diverse route-planning tasks with provably optimal solutions. This allows NeSy-Route to comprehensively evaluate planning across 10,821 route-planning samples, nearly 10 times larger than the largest prior benchmark. Furthermore, a three-level hierarchical neuro-symbolic evaluation protocol is developed to enable accurate assessment and support fine-grained analysis on perception, reasoning, and planning simultaneously. Our comprehensive evaluation of various state-of-the-art MLLMs demonstrates that existing MLLMs show significant deficiencies in perception and planning capabilities. We hope NeSy-Route can support further research and development of more powerful MLLMs for remote sensing.

  • 6 authors
·
Mar 16

The Router Within: Eliciting Native Skill Routing from a Frozen LLM

Skills extend an LLM agent beyond its parametric knowledge, and the gain they promise rests on picking the right one. Deployed harnesses route by preloading every skill's metadata into the context, which disperses the agent's attention and caps the library size. Retrieval pipelines move the selection out of the context, but also out of the agent's capability. We show that the frozen agent LLM already carries the routing signal in its own forward passes, and that two linear maps suffice to read it out with no skill text in the context. Gavel (Glance And Verdict from a frozen LLM) reads it in two steps. A glance projects the task's and each skill's mid-layer states through the two maps, the only parameters trained, and scores the full library against compact per-skill banks that one forward pass builds at installation. A verdict then resumes the shortlisted skills' forward passes and reads the model's own likelihood and yes/no judgment, fused with the glance as a product of experts. Trained once, Gavel transfers zero-shot to three public benchmarks and SkillTraj, our new benchmark of 372 simulated agent trajectories. On Qwen3-32B it outperforms progressive disclosure and retrieve-and-rerank pipelines that add 1.2B to 16B external parameters, by up to 13.4 points on written tasks and up to 21.9 when the need for a skill arises mid-rollout. Routing accuracy improves as the backbone does, and in a bash-agent harness the same 32B triggers the correct skill on Skill-Use more often than far larger frontier models running in Codex.

Enhancing Worldwide Image Geolocation by Ensembling Satellite-Based Ground-Level Attribute Predictors

Geolocating images of a ground-level scene entails estimating the location on Earth where the picture was taken, in absence of GPS or other location metadata. Typically, methods are evaluated by measuring the Great Circle Distance (GCD) between a predicted location and ground truth. However, this measurement is limited because it only evaluates a single point, not estimates of regions or score heatmaps. This is especially important in applications to rural, wilderness and under-sampled areas, where finding the exact location may not be possible, and when used in aggregate systems that progressively narrow down locations. In this paper, we introduce a novel metric, Recall vs Area (RvA), which measures the accuracy of estimated distributions of locations. RvA treats image geolocation results similarly to document retrieval, measuring recall as a function of area: For a ranked list of (possibly non-contiguous) predicted regions, we measure the accumulated area required for the region to contain the ground truth coordinate. This produces a curve similar to a precision-recall curve, where "precision" is replaced by square kilometers area, allowing evaluation of performance for different downstream search area budgets. Following directly from this view of the problem, we then examine a simple ensembling approach to global-scale image geolocation, which incorporates information from multiple sources to help address domain shift, and can readily incorporate multiple models, attribute predictors, and data sources. We study its effectiveness by combining the geolocation models GeoEstimation and the current SOTA GeoCLIP, with attribute predictors based on ORNL LandScan and ESA-CCI Land Cover. We find significant improvements in image geolocation for areas that are under-represented in the training set, particularly non-urban areas, on both Im2GPS3k and Street View images.

  • 3 authors
·
Jul 18, 2024

Ultra-Fusion: A Resilient Tightly-Coupled Multi-Sensor Fusion SLAM Framework under Sensor Degradation and Spatiotemporal Perturbation for Intelligent Transportation Systems

Reliable localization is essential for intelligent transportation systems (ITS), including autonomous vehicles, quadruped last-mile carriers, and infrastructure-inspection unmanned aerial vehicles (UAVs). Although tightly-coupled multi-sensor fusion improves accuracy in favorable conditions, deployed systems remain vulnerable to sensor degradation -- poor illumination, LiDAR degeneracy, wheel slippage, and GNSS outage -- and to spatiotemporal calibration errors. These failures are common in urban canyons, tunnels, and high-speed corridors, where localization drift can degrade route tracking, tunnel passage continuity, and local map alignment. This paper presents Ultra-Fusion, a tightly-coupled multi-sensor localization framework based on a unified sliding-window estimator. Asynchronous measurements are timestamp-ordered and converted into optional factors within one optimization window, supporting WIO, VIO, LIO, and LVIO with optional wheel and GNSS augmentation. Observability-aware initialization selects the bootstrap mode, factor-wise reliability scheduling gates degraded measurements, and online LiDAR--IMU spatiotemporal calibration refines temporal offsets and rotational extrinsics during operation. We extend the M3DGR benchmark with simulation trajectories and evaluate more than 60 open-source SLAM systems on M3DGR, M2DGR-Plus, KAIST, GrandTour, and MARS-LVIG. The results show competitive accuracy across wheeled, legged, and aerial platforms under long-duration and high-speed operation, degradation, and calibration perturbation, improving localization availability for road-level autonomy, campus and warehouse mobility, and low-altitude aerial inspection. To benefit the industrial and academic community, we will release source code and datasets upon paper acceptance.

  • 6 authors
·
Jun 18

MobilityBench: A Benchmark for Evaluating Route-Planning Agents in Real-World Mobility Scenarios

Route-planning agents powered by large language models (LLMs) have emerged as a promising paradigm for supporting everyday human mobility through natural language interaction and tool-mediated decision making. However, systematic evaluation in real-world mobility settings is hindered by diverse routing demands, non-deterministic mapping services, and limited reproducibility. In this study, we introduce MobilityBench, a scalable benchmark for evaluating LLM-based route-planning agents in real-world mobility scenarios. MobilityBench is constructed from large-scale, anonymized real user queries collected from Amap and covers a broad spectrum of route-planning intents across multiple cities worldwide. To enable reproducible, end-to-end evaluation, we design a deterministic API-replay sandbox that eliminates environmental variance from live services. We further propose a multi-dimensional evaluation protocol centered on outcome validity, complemented by assessments of instruction understanding, planning, tool use, and efficiency. Using MobilityBench, we evaluate multiple LLM-based route-planning agents across diverse real-world mobility scenarios and provide an in-depth analysis of their behaviors and performance. Our findings reveal that current models perform competently on Basic information retrieval and Route Planning tasks, yet struggle considerably with Preference-Constrained Route Planning, underscoring significant room for improvement in personalized mobility applications. We publicly release the benchmark data, evaluation toolkit, and documentation at https://github.com/AMAP-ML/MobilityBench .

AGI-LAB-HF AGI Lab
·
Feb 26 4

RouteWeaver: Weaving Mode Selection and Execution into Unified LLM Routing

LLM routing dynamically selects and coordinates heterogeneous language models across diverse tasks. However, existing approaches are largely built around a predefined execution paradigm, such as single-round, multi-round, or agentic routing, which fixes how model calls are organized and limits adaptation to different query needs. We propose RouteWeaver, a unified routing framework that integrates these routing modes within a single LLM policy, jointly learning which mode to use and how to select models within that mode. To jointly optimize mode selection and within-mode execution, we develop COMET-GRPO (COordinated Mode-Execution Training), which decouples the trajectory-level advantage into separate signals for mode selection and within-mode execution, enabling more targeted credit assignment to each decision level. We further introduce progressive exploration, which gradually shifts training from externally assigned modes to autonomous selection, so that the router first learns how to execute each mode before deciding when to use it. We evaluate RouteWeaver across mathematics, coding, knowledge, logical reasoning, and factual recall. RouteWeaver achieves an average accuracy of 61.4%, an 11.03% relative improvement over the strongest baseline, and outperforms all compared baselines in each of the five domains. Ablations show that both COMET-GRPO and progressive exploration are important for adaptive routing; without progressive exploration, the routing policy collapses entirely to single-round execution.

Confident or Seek Stronger: Exploring Uncertainty-Based On-device LLM Routing From Benchmarking to Generalization

Large language models (LLMs) are increasingly deployed and democratized on edge devices. To improve the efficiency of on-device deployment, small language models (SLMs) are often adopted due to their efficient decoding latency and reduced energy consumption. However, these SLMs often generate inaccurate responses when handling complex queries. One promising solution is uncertainty-based SLM routing, offloading high-stakes queries to stronger LLMs when resulting in low-confidence responses on SLM. This follows the principle of "If you lack confidence, seek stronger support" to enhance reliability. Relying on more powerful LLMs is yet effective but increases invocation costs. Therefore, striking a routing balance between efficiency and efficacy remains a critical challenge. Additionally, efficiently generalizing the routing strategy to new datasets remains under-explored. In this paper, we conduct a comprehensive investigation into benchmarking and generalization of uncertainty-driven routing strategies from SLMs to LLMs over 1500+ settings. Our findings highlight: First, uncertainty-correctness alignment in different uncertainty quantification (UQ) methods significantly impacts routing performance. Second, uncertainty distributions depend more on both the specific SLM and the chosen UQ method, rather than downstream data. Building on the insight, we propose a calibration data construction instruction pipeline and open-source a constructed hold-out set to enhance routing generalization on new downstream scenarios. The experimental results indicate calibration data effectively bootstraps routing performance without any new data.

  • 9 authors
·
Feb 5, 2025

GreenServ: Energy-Efficient Context-Aware Dynamic Routing for Multi-Model LLM Inference

Large language models (LLMs) demonstrate remarkable capabilities, but their broad deployment is limited by significant computational resource demands, particularly energy consumption during inference. Static, one-model-fits-all inference strategies are often inefficient, as they do not exploit the diverse range of available models or adapt to varying query requirements. This paper presents GreenServ, a dynamic, context-aware routing framework that optimizes the trade-off between inference accuracy and energy efficiency. GreenServ extracts lightweight contextual features from each query, including task type, semantic cluster, and text complexity, and routes queries to the most suitable model from a heterogeneous pool, based on observed accuracy and energy usage. We employ a multi-armed bandit approach to learn adaptive routing policies online. This approach operates under partial feedback, eliminates the need for extensive offline calibration, and streamlines the integration of new models into the inference pipeline. We evaluated GreenServ across five benchmark tasks and a pool of 16 contemporary open-access LLMs. Experimental results show that GreenServ consistently outperforms static (single-model) and random baselines. In particular, compared to random routing, GreenServ achieved a 22% increase in accuracy while reducing cumulative energy consumption by 31%. Finally, we evaluated GreenServ with RouterBench, achieving an average accuracy of 71.7% with a peak accuracy of 75.7%. All artifacts are open-source and available here: https://github.com/TZData1/llm-inference-router{GitHub}

  • 6 authors
·
Feb 26

False Floors: LLM Safety Routing Evaluations Break Under Distribution Shift

Safety routers send each request to one of several models and are judged against the best single model. A major routing benchmark picks that comparator on the evaluation data. In the benchmark's own setting this is harmless, but under distribution shift it is not. On HELM Safety the selection cost is 0.003-0.030 of harm under random splits and 0.045-0.113 under held-out categories, comparable to the whole deficit attributed to routing, with its direction holding under either published judge alone. It rises seven- to ninefold on AgentDojo when suites are held out. Across seven safety corpora chosen by rules fixed in advance, three meet a registered interval test and four beat a later permutation null, and three of the four interval misses are corpora where some models have zero observed harm. Prior work proves the direction of this bias. We size it on harm and accuracy, show that it is larger under the held-out splits we measure, and bound it by optimism plus a shift-dependent regret. Scored honestly under shift, routing buys little on these benchmarks. In most pool cells the nested router serves the honest baseline's model, and on the nearly saturated AgentDojo corpus a perfect pre-dispatch router is worth at most two points of harm. We also find a model's expressed recognition of a late injection steerable. On held-out reruns an attacker who knows which model it faces lowers GPT-5.4's judged recognition by 19.6 points, confirmed by an independent label. In an offline counterfactual composition into a controller, the same attack raises or lowers estimated harm depending on the fallback model. Safety routing should be evaluated under shift, against a baseline chosen without the test labels, and recognition-based defences should be scored on harm against an attacker who chooses what the model sees.

  • 2 authors
·
Sep 30

Same Simulation, Different Evidence: Where Retrieved Tool Output Costs LLM Agents Accuracy

LLM agents that compute the right answer can still answer wrongly. Agent harnesses increasingly keep long tool outputs out of the context window, saving them to files that the agent searches or reads on demand. We ask where this costs accuracy with a real scientific tool: PHREEQC, a widely used geochemistry simulator from the USGS, whose reports reach 846.8k characters and whose determinism lets every printed value be traced. Agents use it to answer 158 execution-verified multiple-choice items. When agents read the simulator's report through a section index rather than in context, GPT-5.1 and GPT-5.2 lose 11.3 and 7.9 points of accuracy, while Claude Opus 4.6 and Claude Sonnet 4.6 show no detectable cost. Re-running all 11,007 logged simulator calls shows that both GPT models compute the keyed value about as often as before; what changes is the evidence they answer from. Under retrieval they often skip the report, answer from their own higher-precision output files, and misround to a neighboring option, a failure we call evidence substitution. With the simulation held fixed, retrieval still costs GPT-5.2 9.4 points. For GPT-5.4, more frequent correct simulations mask an evidence-use loss of about ten points, leaving a net change indistinguishable from zero. Naming the authoritative output raises accuracy by 6.3-7.9 points over plain retrieval for the three GPT models; for GPT-5.1 and GPT-5.2, inlining outputs that fit works as well, while asking for correct rounding does not. Context-management choices in agent harnesses should be judged by where accuracy is lost, not only by final accuracy.

ucriverside UC Riverside
·
Oct 18 2

Pretrain Once, Route Anywhere: Towards a Foundation Model for LLM Routing

Large language model (LLM) routing aims to assign each query to the most suitable model from a heterogeneous candidate pool, improving the quality--efficiency trade-off of LLM inference. Existing routers are typically learned through local fitting: a router is optimized for a particular query workload and candidate pool, and often requires additional supervision or retraining as the routing environment changes. We ask whether LLM routing can instead be approached from a foundation-model perspective, learning a reusable routing capability that generalizes across tasks, candidate models, and deployment conditions. To this end, we introduce RouteFM, which learns to characterize anonymous candidate models from behavioral context and infer their target-specific capabilities, rather than binding routing decisions to fixed model identities or a single environment. Through episodic pretraining across heterogeneous routing environments, this capability can be reused by a frozen router and adapted to new environments through context alone. Experiments demonstrate transfer across changes in domains, modalities, candidate pools, and context budgets, with the largest gains when behavioral evidence is limited. On MMR-Bench, which is excluded from pretraining, RouteFM outperforms the strongest baseline by 2.23 quality points with only eight observations per candidate. These results support moving LLM routing from repeated local fitting toward a pretrain once, route anywhere paradigm. Our code is publicly available at https://github.com/LAMDA-Model-Reuse/RouteFM.

RouteJudge: An Open Platform for Reproducible and Preference-Aware LLM Routing

We present RouteJudge, an online pairwise preference evaluation framework for LLM routing systems, with a public platform available at https://routejudge.cn. Different from model-level response evaluation, RouteJudge focuses on router-level decision quality. For each user query, multiple routing strategies independently recommend candidate models under the same model pool and budget constraints. The selected model responses are then presented to users through anonymous pairwise comparisons, and the resulting user preferences are attributed back to the routing strategies behind the compared responses. Each evaluation record stores the query, routing decisions, model responses, preference labels, cost, latency, and task metadata, enabling preference-aware, cost-aware, and task-conditioned analysis of LLM routers. To support the continuous expansion of routing methods in RouteJudge, we further release ORBIT (Optimal Routing and Budgeted Inference Toolbox), a modular and extensible toolbox that standardizes the end-to-end workflow of LLM routing. ORBIT provides unified interfaces for benchmark loading, query representation, router implementation, budget-aware evaluation, and method comparison, allowing researchers to develop and evaluate routing algorithms under consistent protocols. It also serves as the submission and integration layer for RouteJudge: researchers can implement routing methods within ORBIT, validate them on existing routing benchmarks, and submit compatible routers for online preference-based evaluation. The code of ORBIT is available at https://github.com/LAMDA-Model-Reuse/ORBIT.

  • 3 authors
·
Jun 18

Online Navigation Refinement: Achieving Lane-Level Guidance by Associating Standard-Definition and Online Perception Maps

Lane-level navigation is critical for geographic information systems and navigation-based tasks, offering finer-grained guidance than road-level navigation by standard definition (SD) maps. However, it currently relies on expansive global HD maps that cannot adapt to dynamic road conditions. Recently, online perception (OP) maps have become research hotspots, providing real-time geometry as an alternative, but lack the global topology needed for navigation. To address these issues, Online Navigation Refinement (ONR), a new mission is introduced that refines SD-map-based road-level routes into accurate lane-level navigation by associating SD maps with OP maps. The map-to-map association to handle many-to-one lane-to-road mappings under two key challenges: (1) no public dataset provides lane-to-road correspondences; (2) severe misalignment from spatial fluctuations, semantic disparities, and OP map noise invalidates traditional map matching. For these challenges, We contribute: (1) Online map association dataset (OMA), the first ONR benchmark with 30K scenarios and 2.6M annotated lane vectors; (2) MAT, a transformer with path-aware attention to aligns topology despite spatial fluctuations and semantic disparities and spatial attention for integrates noisy OP features via global context; and (3) NR P-R, a metric evaluating geometric and semantic alignment. Experiments show that MAT outperforms existing methods at 34 ms latency, enabling low-cost and up-to-date lane-level navigation.

  • 10 authors
·
Jul 10, 2025

Fact-Checking with Large Language Models via Probabilistic Certainty and Consistency

Large language models (LLMs) are increasingly used in applications requiring factual accuracy, yet their outputs often contain hallucinated responses. While fact-checking can mitigate these errors, existing methods typically retrieve external evidence indiscriminately, overlooking the model's internal knowledge and potentially introducing irrelevant noise. Moreover, current systems lack targeted mechanisms to resolve specific uncertainties in the model's reasoning. Inspired by how humans fact-check, we argue that LLMs should adaptively decide whether to rely on internal knowledge or initiate retrieval based on their confidence in a given claim. We introduce Probabilistic Certainty and Consistency (PCC), a framework that estimates factual confidence by jointly modeling an LLM's probabilistic certainty and reasoning consistency. These confidence signals enable an adaptive verification strategy: the model answers directly when confident, triggers targeted retrieval when uncertain or inconsistent, and escalates to deep search when ambiguity is high. Our confidence-guided routing mechanism ensures that retrieval is invoked only when necessary, improving both efficiency and reliability. Extensive experiments across three challenging benchmarks show that PCC achieves better uncertainty quantification than verbalized confidence and consistently outperforms strong LLM-based fact-checking baselines. Furthermore, we demonstrate that PCC generalizes well across various LLMs.

  • 5 authors
·
Jan 5

LLMAP: LLM-Assisted Multi-Objective Route Planning with User Preferences

The rise of large language models (LLMs) has made natural language-driven route planning an emerging research area that encompasses rich user objectives. Current research exhibits two distinct approaches: direct route planning using LLM-as-Agent and graph-based searching strategies. However, LLMs in the former approach struggle to handle extensive map data, while the latter shows limited capability in understanding natural language preferences. Additionally, a more critical challenge arises from the highly heterogeneous and unpredictable spatio-temporal distribution of users across the globe. In this paper, we introduce a novel LLM-Assisted route Planning (LLMAP) system that employs an LLM-as-Parser to comprehend natural language, identify tasks, and extract user preferences and recognize task dependencies, coupled with a Multi-Step Graph construction with iterative Search (MSGS) algorithm as the underlying solver for optimal route finding. Our multi-objective optimization approach adaptively tunes objective weights to maximize points of interest (POI) quality and task completion rate while minimizing route distance, subject to three key constraints: user time limits, POI opening hours, and task dependencies. We conduct extensive experiments using 1,000 routing prompts sampled with varying complexity across 14 countries and 27 cities worldwide. The results demonstrate that our approach achieves superior performance with guarantees across multiple constraints.

  • 4 authors
·
Sep 13, 2025

System X: An LLM Decision Model That Replies from Its Own KV Cache

Decision models return probabilities over supplied options, but a deployed agent may also need to reply in words. The present study introduces System X, a large language model (LLM) decision model that adds a text-reply option to the LLM-as-Jev readout. When this option wins, or confidence is low, the same model continues from the decision's key-value (KV) cache, avoiding a repeated prompt prefill. Qwen3-0.6B has been fine-tuned with LoRA on Reason-9k and Bitext reply rows. JevBench accuracy shows no statistically significant change (55.4% to 54.5%, p=0.87), while expected calibration error falls from 0.292 to 0.169. Held-out Bitext routing accuracy reaches 98.3%. Cache reuse saves 15-37% of latency on an Apple M4 Pro, with token-identical replies in the FP32 demonstration cases. Scoring options on copies of the prompt cache matches full-sequence scoring to within 1.4e-6 in probability. Adding dialogue, industry and complaint data (System X+) improves support-task results but lowers IFEval accuracy from 55.5% to 45.0%. System X v4 uses Qwen3-1.7B, rebalanced data and teacher-rewritten reply targets. Against its base LLM, JevBench accuracy rises from 55.0% to 61.0% (p=0.04), with no statistically significant IFEval change (p=0.71). A matched latency test on unadapted Qwen3-1.7B saves 17-39%. One LLM judge prefers v4 replies to an unadapted 1.7B second call (31 to 11 pairs, p=0.003); the other's preference is not significant. These reply comparisons also differ in prompts and generation limits. State conflicts and unsupported reply details remain failure modes. Further studies with several seeds, human raters and real support data are recommended.

  • 3 authors
·
Oct 17

Leveraging Driver Field-of-View for Multimodal Ego-Trajectory Prediction

Understanding drivers' decision-making is crucial for road safety. Although predicting the ego-vehicle's path is valuable for driver-assistance systems, existing methods mainly focus on external factors like other vehicles' motions, often neglecting the driver's attention and intent. To address this gap, we infer the ego-trajectory by integrating the driver's gaze and the surrounding scene. We introduce RouteFormer, a novel multimodal ego-trajectory prediction network combining GPS data, environmental context, and the driver's field-of-view, comprising first-person video and gaze fixations. We also present the Path Complexity Index (PCI), a new metric for trajectory complexity that enables a more nuanced evaluation of challenging scenarios. To tackle data scarcity and enhance diversity, we introduce GEM, a comprehensive dataset of urban driving scenarios enriched with synchronized driver field-of-view and gaze data. Extensive evaluations on GEM and DR(eye)VE demonstrate that RouteFormer significantly outperforms state-of-the-art methods, achieving notable improvements in prediction accuracy across diverse conditions. Ablation studies reveal that incorporating driver field-of-view data yields significantly better average displacement error, especially in challenging scenarios with high PCI scores, underscoring the importance of modeling driver attention. All data and code are available at https://meakbiyik.github.io/routeformer.

  • 8 authors
·
Dec 13, 2023

Handoff Curves: Initial Selection, Later Handoff, and Supervision Targets in Multi-turn LLM Routing

We study how initial model selection, later handoff, and training targets affect success and cost in LLM tasks that span multiple turns. We compare several router architectures using handoff curves, which record task success and cost as the handoff step changes. Our dataset contains 34,204 complete executions of three Qwen models across BFCL, MultiWOZ, and τ-retail, providing offline supervision for routing decisions. In our primary comparison, with Qwen3.5 35B-A3B as the starting model, allowing a later handoff does not establish an improvement in utility over initial selection on BFCL or MultiWOZ, and increases cost on BFCL across a range of cost weights. Changing the supervision targets improves router performance on both our dataset and TwinRouterBench. On our dataset, replacing noisy training success curves with monotone fits raises success by 0.2 to 4.1 percentage points at the same cost across the reported operating points. On TwinRouterBench, we construct targets that describe the model capability needed for the remaining work and difficult steps ahead. Compared with training on the benchmark's per-step labels, these targets raise trajectory pass scores by 7.8 percentage points and cost savings by 6.3 percentage points on the full static bank. A live deployment of the router trained with these targets resolves 79 of 100 instances at a router cost of 0.59 US dollars per instance.

  • 3 authors
·
Oct 10

ScoutRoute: Efficient Mixture-of-Experts Routing Using Internal Language Model Signals

Efficient expert routing is a fundamental challenge in Mixture-of-Experts (MoE) systems, particularly for heterogeneous collections of independently trained Large Language Mod els (LLMs). Existing routing approaches typically rely on jointly trained gating networks, prompt-based predictors, or computationally expensive multi-model inference, limiting their flexibility and efficiency. This paper presents ScoutRoute, a lightweight post-hoc routing framework that predicts expert competence using internal language model signals extracted from a single forward pass through an inexpensive scout model. Hidden-state representations are used to estimate cross-model competence through lightweight logistic probes, while logit-derived confidence measures are incorporated within a domain-aware routing strategy for efficient expert selec tion without modifying the underlying language models. ScoutRoute isevaluatedon fiveopen-weightlanguagemodels across fourbenchmark datasets covering mathematical reasoning, code generation, commonsense reasoning, and multidis ciplinary knowledge. Experimental results show that ScoutRoute consistently outperforms individual routing signals while requiring only a single scout-model inference. The proposed competence probes also achieve superior calibration compared with conventional confidence measures, demonstrating that internal language model representations provide transferable information for accurate and efficient expert routing across heterogeneous language models

  • 2 authors
·
Oct 15

NavMapFusion: Diffusion-based Fusion of Navigation Maps for Online Vectorized HD Map Construction

Accurate environmental representations are essential for autonomous driving, providing the foundation for safe and efficient navigation. Traditionally, high-definition (HD) maps are providing this representation of the static road infrastructure to the autonomous system a priori. However, because the real world is constantly changing, such maps must be constructed online from on-board sensor data. Navigation-grade standard-definition (SD) maps are widely available, but their resolution is insufficient for direct deployment. Instead, they can be used as coarse prior to guide the online map construction process. We propose NavMapFusion, a diffusion-based framework that performs iterative denoising conditioned on high-fidelity sensor data and on low-fidelity navigation maps. This paper strives to answer: (1) How can coarse, potentially outdated navigation maps guide online map construction? (2) What advantages do diffusion models offer for map fusion? We demonstrate that diffusion-based map construction provides a robust framework for map fusion. Our key insight is that discrepancies between the prior map and online perception naturally correspond to noise within the diffusion process; consistent regions reinforce the map construction, whereas outdated segments are suppressed. On the nuScenes benchmark, NavMapFusion conditioned on coarse road lines from OpenStreetMap data reaches a 21.4% relative improvement on 100 m, and even stronger improvements on larger perception ranges, while maintaining real-time capabilities. By fusing low-fidelity priors with high-fidelity sensor data, the proposed method generates accurate and up-to-date environment representations, guiding towards safer and more reliable autonomous driving. The code is available at https://github.com/tmonnin/navmapfusion

  • 4 authors
·
Dec 2, 2025

Evaluating Commercial AI Chatbots as News Intermediaries

AI chatbots are rapidly shaping how people encounter the news, yet no prior study has systematically measured how accurately these systems, with their proprietary search integrations and retrieval-synthesis pipelines, handle emerging facts across languages and regions. We present a 14-day (February 9-22, 2026) evaluation of six AI chatbots (Gemini 3 Flash and Pro, Grok 4, Claude 4.5 Sonnet, GPT-5 and GPT-4o mini) on 2,100 factual questions derived from same-day BBC News reporting across six regional services (US & Canada, Arabic, Afrique, Hindi, Russian, Turkish). The best systems achieve over 90% multiple-choice accuracy on questions about events reported hours earlier. The same systems, however, lose 11-13% under free-response evaluation, and 16-17% across the cohort. We further characterize three failure patterns. First, every model achieves its lowest accuracy on Hindi (79% vs. 89-91% elsewhere) and citations indicate an Anglophone retrieval bias (e.g., models answering Hindi queries cite English Wikipedia more than any Hindi outlet). Second, retrieval, not reasoning, failures drive over 70% of all errors. When models retrieve a correct source, they often extract the correct answer; the problem is to land on the right source in the first place. Third, models achieving 88-96% accuracy on well-formed questions drop to 19-70% when questions contain subtle false premises, with the most vulnerable model accepting fabricated facts 64% of the time. We also identify a detection-accuracy paradox: the best false-premise detector ranks second in adversarial accuracy (abstention rate), while a weaker detector ranks first, showing that premise detection and answer recovery are partially independent capabilities. Overall, these suggest that high accuracy can mask systematic regional inequity, near-total dependence on retrieval infrastructure, and vulnerability to imperfect queries real users pose.

  • 8 authors
·
May 20

EgoPathBench: Evaluating Zero-Shot Egocentric Waypoint Decision-Making in Vision-Language Models

Zero-shot waypoint navigation requires vision-language models to select, from the current first-person observation, a sequence of spatial actions that is feasible for the agent and reaches the goal, placing joint demands on the integrated spatial intelligence of today's foundation VLMs. Existing spatial-intelligence benchmarks primarily evaluate isolated judgments of relations, directions, or targets and therefore do not directly measure the integrated navigation ability required to combine target recognition, action-consequence assessment, distance estimation, and path planning. To fill this evaluation gap, we introduce EgoPathBench, a dataset and five-task benchmark for first-person waypoint decision-making. Each question presents an egocentric RGB image, a natural-language goal, and numbered visible waypoints; a model returns traversable candidates or an ordered route. Predictions are evaluated for candidate feasibility, adjacent-edge legality, and goal arrival under point-agent or embodied geometry. EgoPathBench contains 31,852 training, 1,345 validation, and 1,111 benchmark questions and retains at least one geometrically verified reference route for every route question. Across nine VLMs, the highest EgoPath Score is only 28.3. The top-ranked model reaches 35.9% success on Point Path, but only 2.9% and 4.0% on Embodied Path and Intent Path, respectively, showing that current models remain limited in forming complete, goal-consistent routes under embodiment constraints. Beyond the evaluation data, we release the corresponding training resource. Fine-tuning Qwen 3.5 4B on the released training split raises its EgoPath Score from 3.9 to 38.9 and improves all four reported evaluations across three external spatial benchmarks, with gains of 1.4--9.6 points.

  • 3 authors
·
Sep 14

When Does Combining Language Models Help? A Co-Failure Ceiling on Routing, Voting, and Mixture-of-Agents Across 67 Frontier Models

Multi-model LLM systems such as routing, voting, cascades, fusion, and mixture-of-agents are used to beat single-model accuracy. We show that their gain is capped by a quantity the field rarely reports. For any policy whose output is one member model answer, accuracy cannot exceed one minus beta, where beta is the rate at which every model is wrong on the same query. In contrast, the usual diagnostic, average pairwise error correlation rho, cannot identify beta: error laws with identical marginals and pairwise correlations can have different all-wrong rates. A Clopper-Pearson bound on beta gives a finite-sample certificate on the largest gain any router, vote, or cascade could deliver before training a router. Across 67 models from 21 providers, a tetrachoric-calibrated single-factor model still underprices the all-wrong tail: on open-ended mathematics, observed beta is 0.052 versus 0.023 under the full 67-model Gaussian copula, about 2.5 times underpricing, with 90 percent CI 1.7 to 3.4 and k equals 17. The effect recurs on execution-graded code, where beta is 0.079. Re-asking the same GPQA-Diamond questions in free-response rather than multiple-choice form reopens the tail, with beta 0.127 and a five-judge panel with kappa 0.73 to 0.92, locating co-failure in answer format rather than subject. At matched quality, low-rho heterogeneous ensembles beat high-rho Self-MoA, but on checkable tasks in our pool, combining models rarely beats the single best model without a strong query-level routing signal. Gains come from models failing on different questions, not from adding more models.

Kaikaku Kaikaku
·
Jun 24 3

Advance Real-time Detection of Traffic Incidents in Highways using Vehicle Trajectory Data

A significant number of traffic crashes are secondary crashes that occur because of an earlier incident on the road. Thus, early detection of traffic incidents is crucial for road users from safety perspectives with a potential to reduce the risk of secondary crashes. The wide availability of GPS devices now-a-days gives an opportunity of tracking and recording vehicle trajectories. The objective of this study is to use vehicle trajectory data for advance real-time detection of traffic incidents on highways using machine learning-based algorithms. The study uses three days of unevenly sequenced vehicle trajectory data and traffic incident data on I-10, one of the most crash-prone highways in Louisiana. Vehicle trajectories are converted to trajectories based on virtual detector locations to maintain spatial uniformity as well as to generate historical traffic data for machine learning algorithms. Trips matched with traffic incidents on the way are separated and along with other trips with similar spatial attributes are used to build a database for modeling. Multiple machine learning algorithms such as Logistic Regression, Random Forest, Extreme Gradient Boost, and Artificial Neural Network models are used to detect a trajectory that is likely to face an incident in the downstream road section. Results suggest that the Random Forest model achieves the best performance for predicting an incident with reasonable recall value and discrimination capability.

  • 2 authors
·
Aug 14, 2024

CleanMAP: Distilling Multimodal LLMs for Confidence-Driven Crowdsourced HD Map Updates

The rapid growth of intelligent connected vehicles (ICVs) and integrated vehicle-road-cloud systems has increased the demand for accurate, real-time HD map updates. However, ensuring map reliability remains challenging due to inconsistencies in crowdsourced data, which suffer from motion blur, lighting variations, adverse weather, and lane marking degradation. This paper introduces CleanMAP, a Multimodal Large Language Model (MLLM)-based distillation framework designed to filter and refine crowdsourced data for high-confidence HD map updates. CleanMAP leverages an MLLM-driven lane visibility scoring model that systematically quantifies key visual parameters, assigning confidence scores (0-10) based on their impact on lane detection. A novel dynamic piecewise confidence-scoring function adapts scores based on lane visibility, ensuring strong alignment with human evaluations while effectively filtering unreliable data. To further optimize map accuracy, a confidence-driven local map fusion strategy ranks and selects the top-k highest-scoring local maps within an optimal confidence range (best score minus 10%), striking a balance between data quality and quantity. Experimental evaluations on a real-world autonomous vehicle dataset validate CleanMAP's effectiveness, demonstrating that fusing the top three local maps achieves the lowest mean map update error of 0.28m, outperforming the baseline (0.37m) and meeting stringent accuracy thresholds (<= 0.32m). Further validation with real-vehicle data confirms 84.88% alignment with human evaluators, reinforcing the model's robustness and reliability. This work establishes CleanMAP as a scalable and deployable solution for crowdsourced HD map updates, ensuring more precise and reliable autonomous navigation. The code will be available at https://Ankit-Zefan.github.io/CleanMap/

  • 8 authors
·
Apr 14, 2025

DecisionPivot: A Diagnostic Benchmark for Decision Models in LLM Systems

Decision models support routing, guardrails, and output verification in LLM systems. However, item accuracy alone cannot establish whether models make correct decisions across controlled variations or assign reliable confidence to their predictions. We introduce DecisionPivot, a diagnostic benchmark comprising 48 tasks and 40,033 items across seven decision roles. Its core track contains 7,800 items from 13 generated task families, organized into contrast groups with computed answers verified by independently implemented solvers. The complementary reference track contains 32,233 items from 35 public test sets, preserving their original evaluation metrics. We evaluate 40 decision models and 14 general models using documented, model-specific protocols, assessing item and contrast-group accuracy, probability ordering, calibration, and empirical selective coverage. Our results reveal substantial differences obscured by aggregate scores: two 27B models separated by only 2.6 points on the reference track achieve contrast-group accuracies of 70.1% and 44.2%. Across 2,400 binary contrast pairs, Perplexity Decider correctly ranks the positive member above the negative member in 92.3% of pairs but answers both members correctly in only 74.1%, exposing a gap between probability ordering and decision correctness. Models with similar item accuracy also differ in the reliability of their high-confidence predictions. On a separate 1,296-item subset, GLM-5.3 achieves 93.5\% contrast-group accuracy at a higher reasoning setting, compared with 81.5% at its lowest effort. By linking errors to pivotal details and difficulty levels, DecisionPivot provides fine-grained diagnostics of decision failures that aggregate evaluation alone cannot reveal.

startlux-models StartLux
·
Oct 19 3

Mobility Anomaly Generation using LLM-Driven Behavior with Kinematic Constraints

Although the study of human trajectory anomalies is critical for advancing spatial data mining, empirical research remains severely hindered by a pervasive lack of ground-truth datasets. Despite the availability of several real-world and simulated human trajectory collections, these datasets exclusively capture normal mobility patterns and lack annotated anomalies. This specific scarcity is fundamentally driven by the inherent statistical rarity of anomalous events, precluding the feasibility of conventional observational methods. Compounding this challenge, the systematic acquisition of large-scale mobility data is strictly bottlenecked by prohibitive costs and stringent privacy regulations. To overcome these fundamental limitations and establish a reliable human trajectory anomalies dataset with annotated ground truth, we introduce a novel, end-to-end generative framework designed to synthesize realistic trajectory anomalies at scale. Our architecture bridges the gap between purely synthetic mobility data and complex real-world physical constraints by operating directly on baseline simulated trajectories. We employ Large Language Model (LLM) agents to systematically inject semantically meaningful behavioral anomalies such as irregular out-of-distribution check-ins and skipped routine visits. To ensure rigorous spatial validity, the system leverages map-constrained routing reconstruction to recalculate the physical transitions between these LLM agent-modified staypoints. Moreover, to narrow the simulation-to-reality gap, we augment the resulting trajectories with a context-aware spatial noise model, parameterized by environmental and location-specific variables, to accurately emulate heterogeneous GPS sensor degradation.

  • 3 authors
·
Jun 8

TwinRouterBench: Fast Static and Live Dynamic Evaluation for Realistic Agentic LLM Routing

LLM routing matters most in long-horizon applications such as coding agents, deep research systems, and computer-use agents, where a single user request triggers many model calls. Routing each call to the cheapest sufficient model can cut costs without sacrificing quality, yet existing router benchmarks evaluate routers only on one-shot prompts. They never expose the router-visible prefix at an intermediate agent step, never test whether a cheaper replacement preserves downstream task success, and often rely on online LLM judges at evaluation time. We introduce TwinRouterBench, a step-level routing benchmark with two tracks. The static track provides 970 router-visible prefixes from 520 instances across SWE-bench, BFCL, mtRAG, QMSum, and PinchBench, each paired with an execution-verified target tier estimated under a released downgrade-and-cascade protocol; scoring is deterministic arithmetic over tier labels, trajectory membership, and token costs, with no online evaluator-side LLM judge. The dynamic track supplies a harness that runs routers on the full 500-case SWE-bench Verified suite; in this paper we report a 100-case held-out evaluation disjoint from the static SWE supervision split. At each LLM call the router selects a concrete model from a locked pool, and success is measured by official task resolution and realized API spend. The two tracks support fast offline iteration followed by end-to-end validation under live agent execution. Code and data are available at https://github.com/CommonstackAI/TwinRouterBench.

  • 17 authors
·
May 13

SCOPE-Router: Cost-Aware Open-Set VLM Routing for Execution-Oriented Tasks

Model routing aims to select the most suitable model from a candidate pool for each query, balancing quality and cost. Existing VLM routing research is limited to traditional VQA evaluation, lacks systematic calibration optimization for open-set scenarios, and employs training objectives that dilute multi-positive signals via softmax normalization without incorporating cost. We address these limitations with three contributions: (1)VLM-ExecRouterBench, the first execution-oriented VLM routing benchmark covering Code, Agentic, and Search domains with 11 candidate models spanning nearly two orders of magnitude in pricing; (2)SCOPE-Router, a dual-tower router that matches queries to model behavior profiles constructed via hybrid calibration (random/diagnostic/diversity sampling), enabling new models to join routing without retraining; (3)CRM+RCCR, an architecture-agnostic cost-aware objective that encodes cost preference into continuous relevance targets through per-pair independent scoring, eliminating multi-positive dilution while regularizing queries with similar routing preferences to be closer in the routing space. Empirically, SCOPE-Router achieves the best Rank Score on all three benchmarks, surpassing the runner-up by 1.84 points under OOD settings and by 6.75 points under doubly OOD open-set evaluation. When applied to four diverse routers, CRM+RCCR improves Rank Score by 1.25--6.21 points.

  • 17 authors
·
Aug 11