Daily Papers

Training humanoid whole-body vision-language-action (VLA) policies requires costly robot demonstrations with aligned robot-view observations and controller-compatible whole-body state-action labels. Egocentric human demonstrations offer scalable supervision but have misaligned views and sparse motion cues. Existing approaches either pretrain policies that still require robot data for adaptation or generate controller-specific commands that limit reuse. Conversion also requires robot-view observations aligned with the generated whole-body motion. We present KODA (Kinematics-Observation Data Alignment), which converts egocentric RGB demonstrations into whole-body VLA training data using a reusable canonical trajectory to guide robot-view synthesis and generate controller-specific whole-body state-action supervision. KODA first generates a simulator-checked whole-body trajectory using a sparse tracker with sampling-based command optimization. This generated trajectory directly determines the onboard camera poses used to synthesize corresponding robot-view observations. The motion, observations, and task instruction form a canonical record. For each deployment controller, KODA optimizes commands to track the stored motion and records the corresponding action labels and proprioceptive states. When switching controllers, KODA retains this canonical record and regenerates whole-body state-action supervision for co-training with matching robot demonstrations. We evaluate KODA on four Unitree G1 loco-manipulation tasks using two whole-body controllers, SONIC and HEFT. With robot data held fixed, macro-average success on conditions covered by human demonstrations but absent from robot data improves by 45.0 and 46.25 percentage points, respectively. Under both controllers, this metric shows an upward trend across the evaluated human-data budgets, suggesting potential for further scaling.

Command-line interfaces (CLIs) provide structured textual environments for system administration. Explorations have been performed using pre-trained language models (PLMs) to simulate these environments for safe interaction in high-risk environments. However, their use has been constrained to frozen, large parameter models like GPT. For smaller architectures to reach a similar level of believability, a rich dataset of CLI interactions is required. Existing public datasets focus on mapping natural-language tasks to commands, omitting crucial execution data such as exit codes, outputs, and environmental side effects, limiting their usability for behavioral modeling. We introduce a Shell Input -Output Environment (ShIOEnv), which casts command construction as a Markov Decision Process whose state is the partially built sequence and whose actions append arguments. After each action, ShIOEnv executes the candidate and returns its exit status, output, and progress toward a minimal-length behavioral objective. Due to the intractable nature of the combinatorial argument state-action space, we derive a context-free grammar from man pages to mask invalid arguments from being emitted. We explore random and proximal-policy optimization (PPO)-optimized sampling of unrestricted and grammar-masked action spaces to produce four exploration strategies. We observed that grammar masking and PPO significantly improve sample efficiency to produce a higher quality dataset (maximizing the number of arguments while minimizing redundancies). Policy-generated datasets of shell input-output behavior pairs are used to fine-tune CodeT5, where we observe 85% improvements in BLEU-4 when constraining the action space to grammar productions with an additional 26% improvement when applying PPO. The ShIOEnv environment and curated command behavior datasets are released for use in future research.

Test-time scaling improves the reasoning performance of large language models but incurs substantial cost in both total computation and latency. Existing adaptive sampling methods partially mitigate this issue by dynamically deciding when to stop sampling, yet they typically rely on heuristic rules or rely on distribution assumptions. In this work, we formulate adaptive sampling as a Markov decision process (MDP). We train a lightweight sampling controller with reinforcement learning (RL) to jointly balance answer correctness, latency, and computation cost. At each round, the controller decides to stop sampling or to acquire additional samples. Our method is lightweight which only relies on statistics of final answers, and can be trained and deployed on CPU. We further show that the resulting framework admits an interpretation as the Lagrangian relaxation of a constrained optimization problem with explicit budget constraints. Experiments against strong baselines such as ASC and ESC show that our method achieves improved trade-offs among answer correctness, sampling rounds, and total samples required.

Prompt optimization improves language models without updating their weights by searching for a better system prompt, but its effectiveness varies widely across tasks. We study what makes a task amenable to prompt optimization. We show that the reward variance across different system prompts can be decomposed into two components: variance among responses, which captures generation stochasticity, and variance among system prompts, which captures differences in system prompt quality. Prompt optimization succeeds when variance among system prompts is sufficiently large, but fails when variance among responses dominates the variance of the system prompts. Surprisingly, we further show that scaling to more user prompts can hurt optimization by reducing variance among system prompts, especially on heterogeneous datasets where different user prompts favor different system prompts. Motivated by this insight, we propose p1, a simple user prompt filtering method that selects a small subset of user prompts with high variance across candidate system prompts. This subset of user prompts allows one to distinguish a good system prompt from a bad one, making system optimization easier. Experiments on reasoning benchmarks show that p1 substantially improves prompt optimization over training on the full dataset and outperforms strong baselines such as GEPA. Notably, training on only two prompts from AIME 24 yields a system prompt that generalizes well to other reasoning benchmarks.

This paper provides a self-contained, from-scratch, exposition of key algorithms for instruction tuning of models: SFT, Rejection Sampling, REINFORCE, Trust Region Policy Optimization (TRPO), Proximal Policy Optimization (PPO), Group Relative Policy Optimization (GRPO), and Direct Preference Optimization (DPO). Explanations of these algorithms often assume prior knowledge, lack critical details, and/or are overly generalized and complex. Here, each method is discussed and developed step by step using simplified and explicit notation focused on LLMs, aiming to eliminate ambiguity and provide a clear and intuitive understanding of the concepts. By minimizing detours into the broader RL literature and connecting concepts to LLMs, we eliminate superfluous abstractions and reduce cognitive overhead. Following this exposition, we provide a literature review of new techniques and approaches beyond those detailed. Finally, new ideas for research and exploration in the form of GRAPE (Generalized Relative Advantage Policy Evolution) are presented.

Large Language Models (LLMs) have achieved significant advances in reasoning tasks. A key approach is tree-based search with verifiers, which expand candidate reasoning paths and use reward models to guide pruning and selection. Although effective in improving accuracy, these methods are not optimal in terms of efficiency: they perform simple decomposition on the reasoning process, but ignore the planning-execution nature of tasks such as math reasoning or code generation. This results in inefficient exploration of reasoning process. To address this, we propose a dual-phase test-time scaling framework that explicitly separates reasoning into planning and execution, and performs search over the two phases individually. Specifically, we decompose reasoning trajectories and develop reward models for each phase, enabling the search to explore and prune plans and executions separately. We further introduce a dynamic budget allocation mechanism that adaptively redistributes sampling effort based on reward feedback, allowing early stopping on confident steps and reallocation of computation to more challenging parts of the reasoning process. Experiments on both mathematical reasoning and code generation benchmarks demonstrate that our approach consistently improves accuracy while reducing redundant computation.

Sampling-based search, a simple paradigm for utilizing test-time compute, involves generating multiple candidate responses and selecting the best one -- typically by verifying each response for correctness. In this paper, we study the scaling trends governing sampling-based search. Among our findings is that simply scaling up a minimalist implementation that uses only random sampling and direct self-verification results in sustained performance improvements that, for example, elevate the Gemini v1.5 Pro model's reasoning capabilities past that of o1-Preview on popular benchmarks. We partially attribute the scalability of sampling-based search to a phenomenon of implicit scaling, where sampling a larger pool of responses in turn improves verification accuracy. We further identify two useful principles for improving self-verification capabilities with test-time compute: (1) comparing across responses provides helpful signals about the locations of errors and hallucinations, and (2) different model output styles are useful for different contexts -- chains of thought are useful for reasoning but harder to verify. We also find that, though accurate verification can be elicited, frontier models demonstrate remarkably weak out-of-box verification capabilities and introduce a benchmark to measure progress on these deficiencies.

Large language models show great potential in generating and optimizing code. Widely used sampling methods such as Nucleus Sampling increase the diversity of generation but often produce repeated samples for low temperatures and incoherent samples for high temperatures. Furthermore, the temperature coefficient has to be tuned for each task, limiting its usability. We present Priority Sampling, a simple and deterministic sampling technique that produces unique samples ordered by the model's confidence. Each new sample expands the unexpanded token with the highest probability in the augmented search tree. Additionally, Priority Sampling supports generation based on regular expression that provides a controllable and structured exploration process. Priority Sampling outperforms Nucleus Sampling for any number of samples, boosting the performance of the original model from 2.87% to 5% improvement over -Oz. Moreover, it outperforms the autotuner used for the generation of labels for the training of the original model in just 30 samples.

Sampling is ubiquitous in machine learning methodologies. Due to the growth of large datasets and model complexity, we want to learn and adapt the sampling process while training a representation. Towards achieving this grand goal, a variety of sampling techniques have been proposed. However, most of them either use a fixed sampling scheme or adjust the sampling scheme based on simple heuristics. They cannot choose the best sample for model training in different stages. Inspired by "Think, Fast and Slow" (System 1 and System 2) in cognitive science, we propose a reward-guided sampling strategy called Adaptive Sample with Reward (ASR) to tackle this challenge. To the best of our knowledge, this is the first work utilizing reinforcement learning (RL) to address the sampling problem in representation learning. Our approach optimally adjusts the sampling process to achieve optimal performance. We explore geographical relationships among samples by distance-based sampling to maximize overall cumulative reward. We apply ASR to the long-standing sampling problems in similarity-based loss functions. Empirical results in information retrieval and clustering demonstrate ASR's superb performance across different datasets. We also discuss an engrossing phenomenon which we name as "ASR gravity well" in experiments.

Data quality and diversity are key to the construction of effective instruction-tuning datasets. % With the increasing availability of open-source instruction-tuning datasets, it is advantageous to automatically select high-quality and diverse subsets from a vast amount of data. % Existing methods typically prioritize instance quality and use heuristic rules to maintain diversity. % However, this absence of a comprehensive view of the entire collection often leads to suboptimal results. % Moreover, heuristic rules generally focus on distance or clustering within the embedding space, which fails to accurately capture the intent of complex instructions in the semantic space. % To bridge this gap, we propose a unified method for quantifying the information content of datasets. This method models the semantic space by constructing a label graph and quantifies diversity based on the distribution of information within the graph. % Based on such a measurement, we further introduce an efficient sampling method that selects data samples iteratively to Maximize the Information Gain (MIG) in semantic space. % Experiments on various datasets and base models demonstrate that MIG consistently outperforms state-of-the-art methods. % Notably, the model fine-tuned with 5\% Tulu3 data sampled by MIG achieves comparable performance to the official SFT model trained on the full dataset, with improvements of +5.73\% on AlpacaEval and +6.89\% on Wildbench.

Optimization is ubiquitous. While derivative-based algorithms have been powerful tools for various problems, the absence of gradient imposes challenges on many real-world applications. In this work, we propose Optimization by PROmpting (OPRO), a simple and effective approach to leverage large language models (LLMs) as optimizers, where the optimization task is described in natural language. In each optimization step, the LLM generates new solutions from the prompt that contains previously generated solutions with their values, then the new solutions are evaluated and added to the prompt for the next optimization step. We first showcase OPRO on linear regression and traveling salesman problems, then move on to prompt optimization where the goal is to find instructions that maximize the task accuracy. With a variety of LLMs, we demonstrate that the best prompts optimized by OPRO outperform human-designed prompts by up to 8% on GSM8K, and by up to 50% on Big-Bench Hard tasks.

Sampling is a basic operation in many inference-time algorithms of large language models (LLMs). To scale up inference efficiently with a limited compute, it is crucial to find an optimal allocation for sample compute budgets: Which sampling configurations (model, temperature, language, etc.) do we use? How many samples do we generate in each configuration? We formulate these choices as a learning problem and propose OSCA, an algorithm that Optimizes Sample Compute Allocation by finding an optimal mix of different inference configurations. Our experiments show that with our learned mixed allocation, we can achieve accuracy better than the best single configuration with 128x less compute on code generation and 25x less compute on 4 reasoning tasks. OSCA is also shown to be effective in agentic workflows beyond single-turn tasks, achieving a better accuracy on SWE-Bench with 3x less compute than the default configuration. Our code and generations are released at https://github.com/LeiLiLab/OSCA.

Diverse outputs in text generation are necessary for effective exploration in complex reasoning tasks, such as code generation and mathematical problem solving. Such Pass@k problems benefit from distinct candidates covering the solution space. However, traditional sampling approaches often waste computational resources on repetitive failure modes. While Diffusion Language Models have emerged as a competitive alternative to the prevailing Autoregressive paradigm, they remain susceptible to this redundancy, with independent samples frequently collapsing into similar modes. To address this, we propose a training free, low cost intervention to enhance generative diversity in Diffusion Language Models. Our approach modifies intermediate samples in a batch sequentially, where each sample is repelled from the feature space of previous samples, actively penalising redundancy. Unlike prior methods that require retraining or beam search, our strategy incurs negligible computational overhead, while ensuring that each sample contributes a unique perspective to the batch. We evaluate our method on the HumanEval and GSM8K benchmarks using the LLaDA-8B-Instruct model. Our results demonstrate significantly improved diversity and Pass@k performance across various temperature settings. As a simple modification to the sampling process, our method offers an immediate, low-cost improvement for current and future Diffusion Language Models in tasks that benefit from diverse solution search. We make our code available at https://github.com/sean-lamont/odd.

The Bourne-Again Shell (Bash) command-line interface for Linux systems has complex syntax and requires extensive specialized knowledge. Using the natural language to Bash command (NL2SH) translation capabilities of large language models (LLMs) for command composition circumvents these issues. However, the NL2SH performance of LLMs is difficult to assess due to inaccurate test data and unreliable heuristics for determining the functional equivalence of Bash commands. We present a manually verified test dataset of 600 instruction-command pairs and a training dataset of 40,939 pairs, increasing the size of previous datasets by 441% and 135%, respectively. Further, we present a novel functional equivalence heuristic that combines command execution with LLM evaluation of command outputs. Our heuristic can determine the functional equivalence of two Bash commands with 95% confidence, a 16% increase over previous heuristics. Evaluation of popular LLMs using our test dataset and heuristic demonstrates that parsing, in-context learning, in-weight learning, and constrained decoding can improve NL2SH accuracy by up to 32%. Our findings emphasize the importance of dataset quality, execution-based evaluation and translation method for advancing NL2SH translation. Our code is available at https://github.com/westenfelder/NL2SH

Reinforcement learning with verifiable rewards, particularly Group Relative Policy Optimization (GRPO), has significantly advanced the reasoning capabilities of Large Language Models (LLMs). However, in complex tasks, GRPO frequently suffers from the ``zero-advantage problem'': when all sampled rollouts for a query fail, the relative advantage collapses to zero. Consequently, the model loses effective training signals for these questions, wasting the training data and computational budget. While simply increasing the sampling budget for these questions is a common remedy, the static sampling policy inherently constrains reasoning exploration, limiting the success rate. In this paper, we propose Lorem Perturbation for Exploration (LoPE), a simple yet effective training framework to break this exploration bottleneck. We posit that task-irrelevant prompt-space perturbations can shift the model's output distribution enough to unlock orthogonal reasoning pathways for hard questions. Specifically, LoPE prepends sequences stochastically assembled from Lorem Ipsum vocabulary (a pseudo-Latin placeholder text) to the prompts before resampling. Experiments across 1.7B, 4B, and 7B models demonstrate that LoPE significantly outperforms resampling with the original prompts. Further analysis reveals that other Latin-based random sequences with low perplexity are also effective perturbations. Our results establish LoPE as a strong baseline for broadening exploration in LLM reinforcement learning.

Inference-time scaling has emerged as a powerful technique for enhancing the reasoning performance of Large Language Models (LLMs). However, existing approaches often rely on heuristic strategies for parallel sampling, lacking a principled foundation. To address this gap, we propose a probabilistic framework that formalizes the optimality of inference-time scaling under the assumption that parallel samples are independently and identically distributed (i.i.d.), and where the Best-of-N selection strategy follows a probability distribution that can be estimated. Within this framework, we derive a theoretical lower bound on the required number of samples to achieve a target performance level, providing the first principled guidance for compute-efficient scaling. Leveraging this insight, we develop OptScale, a practical algorithm that dynamically determines the optimal number of sampled responses. OptScale employs a language model-based predictor to estimate probabilistic prior parameters, enabling the decision of the minimal number of samples needed that satisfy predefined performance thresholds and confidence levels. Extensive experiments on representative reasoning benchmarks (including MATH-500, GSM8K, AIME, and AMC) demonstrate that OptScale significantly reduces sampling overhead while remaining better or on par with state-of-the-art reasoning performance. Our work offers both a theoretical foundation and a practical solution for principled inference-time scaling, addressing a critical gap in the efficient deployment of LLMs for complex reasoning.

Reinforcement learning (RL) is a central approach for improving reasoning capabilities in large language models (LLMs), where training efficiency depends critically on how problems are sampled during optimization. Existing adaptive curriculum learning methods typically prioritize prompts of intermediate difficulty, treating problem selection as a standard bandit problem with independent arms and overlooking the structured, heterogeneous nature of the task space. In this work, we frame problem sampling as a manifold-structured bandit problem with endogenous non-stationarity: problems are related through the model's latent representation space, and sampling decisions can steer how learning signals evolve across that space. To operationalize this perspective, we introduce Bayesian Manifold Curriculum (BMC), a structure-aware framework that organizes problems into a hierarchical task tree and applies Bayesian learning to guide sampling. Empirically, we find that different sampling strategies induce non-trivial tradeoffs between productivity (learning signal), diversity (coverage of the task manifold), and utility (evaluation relevance). These results show that prioritizing difficulty alone is insufficient for strong downstream performance, highlighting the importance of incorporating structure and type-awareness into problem sampling.

Large Language Models (LLMs) have shown impressive capabilities in many scenarios, but their performance depends, in part, on the choice of prompt. Past research has focused on optimizing prompts specific to a task. However, much less attention has been given to optimizing the general instructions included in a prompt, known as a system prompt. To address this gap, we propose SPRIG, an edit-based genetic algorithm that iteratively constructs prompts from prespecified components to maximize the model's performance in general scenarios. We evaluate the performance of system prompts on a collection of 47 different types of tasks to ensure generalizability. Our study finds that a single optimized system prompt performs on par with task prompts optimized for each individual task. Moreover, combining system and task-level optimizations leads to further improvement, which showcases their complementary nature. Experiments also reveal that the optimized system prompts generalize effectively across model families, parameter sizes, and languages. This study provides insights into the role of system-level instructions in maximizing LLM potential.

Recent systems for optimizing prompts, programs, and ML workflows typically rely on explicit outer-loop controllers such as evolutionary search, bandits, or textual-gradient methods. We ask a fundamentally different question: how much of this search policy can be internalized by a single tool-using agent? We present ReASearch, a unified framework for reasoning-driven optimization in which the agent autonomously decides what to evaluate, how to diagnose failures, which edits to make, and when to verify or restart. Rather than serving only as a proposal generator guided by hand-designed heuristics, the agent actively analyzes outcomes, allocates budget, and refines its strategy over long horizons through persistent memory. With a shared agent loop and domain-specific tools, ReASearch instantiates the exact same scaffold to optimize prompts, programs, and ML workflows. Across 14 diverse tasks, it is competitive with and mostly better than specialized optimization systems, achieving gains of 2% to 40% over strong domain-specific baselines, and in some cases discovering solutions that improve on prior human best-known results. Crucially, we observe that complex search behaviors, which are typically implemented by explicit controllers, emerge naturally from the agent's reasoning process.

While increasing training compute has significantly improved the performance of large language models (LLMs), similar gains have not been observed when scaling inference compute. We hypothesize that the primary issue lies in the uniformity of LLM outputs, which leads to inefficient sampling as models repeatedly generate similar but inaccurate responses. Motivated by an intriguing relationship between solution accuracy and response diversity, we propose DivSampling -- a novel and versatile sampling technique designed to enhance the diversity of candidate solutions by introducing prompt perturbations.DivSampling incorporates two categories of perturbations: task-agnostic approaches, which are general and not tailored to any specific task, and task-specific approaches, which are customized based on task content. Our theoretical analysis demonstrates that, under mild assumptions, the error rates of responses generated from diverse prompts are significantly lower compared to those produced by stationary prompts. Comprehensive evaluations across various tasks -- including reasoning, mathematics, and code generation -- highlight the effectiveness of DivSampling in improving solution accuracy. This scalable and efficient approach offers a new perspective on optimizing test-time inference, addressing limitations in current sampling strategies.

Recent advancements in large language models (LLMs) have shifted focus toward scaling inference-time compute, improving performance without retraining the model. A common approach is to sample multiple outputs in parallel, and select one of these as the final output. However, work to date has focused on English and a handful of domains such as math and code. In contrast, we are most interested in techniques that generalize across open-ended tasks, formally verifiable tasks, and across languages. In this work, we study how to robustly scale inference-time compute for open-ended generative tasks in a multilingual, multi-task setting. Our findings show that both sampling strategy based on temperature variation and selection strategy must be adapted to account for diverse domains and varied language settings. We evaluate existing selection methods, revealing that strategies effective in English often fail to generalize across languages. We propose novel sampling and selection strategies specifically adapted for multilingual and multi-task inference scenarios, and show they yield notable gains across languages and tasks. In particular, our combined sampling and selection methods lead to an average +6.8 jump in win-rates for our 8B models on m-ArenaHard-v2.0 prompts, against proprietary models such as Gemini. At larger scale, Command-A (111B model) equipped with our methods, shows +9.0 improvement in win-rates on the same benchmark with just five samples against single-sample decoding, a substantial increase at minimal cost. Our results underscore the need for language- and task-aware approaches to inference-time compute, aiming to democratize performance improvements in underrepresented languages.

Large language models have demonstrated remarkable capabilities, but their performance is heavily reliant on effective prompt engineering. Automatic prompt optimization (APO) methods are designed to automate this and can be broadly categorized into those targeting instructions (instruction optimization, IO) vs. those targeting exemplars (exemplar selection, ES). Despite their shared objective, these have evolved rather independently, with IO recently receiving more research attention. This paper seeks to bridge this gap by comprehensively comparing the performance of representative IO and ES techniques, both isolation and combination, on a diverse set of challenging tasks. Our findings reveal that intelligently reusing model-generated input-output pairs obtained from evaluating prompts on the validation set as exemplars consistently improves performance over IO methods but is currently under-investigated. We also find that despite the recent focus on IO, how we select exemplars can outweigh how we optimize instructions, with ES strategies as simple as random search outperforming state-of-the-art IO methods with seed instructions without any optimization. Moreover, we observe synergy between ES and IO, with optimal combinations surpassing individual contributions. We conclude that studying exemplar selection as a standalone method and its optimal combination with instruction optimization remains a crucial aspect of APO and deserves greater consideration in future research, even in the era of highly capable instruction-following models.

Retrieval-augmented generation (RAG) enables large language models (LLMs) to produce evidence-based responses, and its performance hinges on the matching between the retriever and LLMs. Retriever optimization has emerged as an efficient alternative to fine-tuning LLMs. However, existing solutions suffer from objective mismatch between retriever optimization and the goal of RAG pipeline. Reinforcement learning (RL) provides a promising solution to address this limitation, yet applying RL to retriever optimization introduces two fundamental challenges: 1) the deterministic retrieval is incompatible with RL formulations, and 2) state aliasing arises from query-only retrieval in multi-hop reasoning. To address these challenges, we replace deterministic retrieval with stochastic sampling and formulate RAG as a Markov decision process, making retriever optimizable by RL. Further, we incorporate retrieval history into the state at each retrieval step to mitigate state aliasing. Extensive experiments across diverse RAG pipelines, datasets, and retriever scales demonstrate consistent improvements of our approach in RAG performance.

General-purpose open-domain dense retrieval systems are usually trained with a large, eclectic mix of corpora and search tasks. How should these diverse corpora and tasks be sampled for training? Conventional approaches sample them uniformly, proportional to their instance population sizes, or depend on human-level expert supervision. It is well known that the training data sampling strategy can greatly impact model performance. However, how to find the optimal strategy has not been adequately studied in the context of embedding models. We propose Inf-DDS, a novel reinforcement learning driven sampling framework that adaptively reweighs training datasets guided by influence-based reward signals and is much more lightweight with respect to GPU consumption. Our technique iteratively refines the sampling policy, prioritizing datasets that maximize model performance on a target development set. We evaluate the efficacy of our sampling strategy on a wide range of text retrieval tasks, demonstrating strong improvements in retrieval performance and better adaptation compared to existing gradient-based sampling methods, while also being 1.5x to 4x cheaper in GPU compute. Our sampling strategy achieves a 5.03 absolute NDCG@10 improvement while training a multilingual bge-m3 model and an absolute NDCG@10 improvement of 0.94 while training all-MiniLM-L6-v2, even when starting from expert-assigned weights on a large pool of training datasets.

Reinforcement Learning (RL) has shown remarkable success in enhancing the reasoning capabilities of Large Language Models (LLMs). Process-Supervised RL (PSRL) has emerged as a more effective paradigm compared to outcome-based RL. However, existing PSRL approaches suffer from limited exploration efficiency, both in terms of branching positions and sampling. In this paper, we introduce a novel PSRL framework (AttnRL), which enables efficient exploration for reasoning models. Motivated by preliminary observations that steps exhibiting high attention scores correlate with reasoning behaviors, we propose to branch from positions with high values. Furthermore, we develop an adaptive sampling strategy that accounts for problem difficulty and historical batch size, ensuring that the whole training batch maintains non-zero advantage values. To further improve sampling efficiency, we design a one-step off-policy training pipeline for PSRL. Extensive experiments on multiple challenging mathematical reasoning benchmarks demonstrate that our method consistently outperforms prior approaches in terms of performance and sampling and training efficiency.

Self-improvement methods enable large language models (LLMs) to generate solutions themselves and iteratively train on filtered, high-quality rationales. This process proves effective and reduces the reliance on human supervision in LLMs' reasoning, but the performance soon plateaus. We delve into the process and find that models tend to over-sample on easy queries and under-sample on queries they have yet to master. As iterations proceed, this imbalance in sampling is exacerbated, leading to a long-tail distribution where solutions to difficult queries almost diminish. This phenomenon limits the performance gain of self-improving models. A straightforward solution is brute-force sampling to balance the distribution, which significantly raises computational costs. In this paper, we introduce Guided Self-Improvement (GSI), a strategy aimed at improving the efficiency of sampling challenging heavy-tailed data. It leverages Socratic-style guidance signals to help LLM reasoning with complex queries, reducing the exploration effort and minimizing computational overhead. Experiments on four models across diverse mathematical tasks show that GSI strikes a balance between performance and efficiency, while also being effective on held-out tasks.

We propose an extension of Thompson sampling to optimization problems over function spaces where the objective is a known functional of an unknown operator's output. We assume that queries to the operator (such as running a high-fidelity simulator or physical experiment) are costly, while functional evaluations on the operator's output are inexpensive. Our algorithm employs a sample-then-optimize approach using neural operator surrogates. This strategy avoids explicit uncertainty quantification by treating trained neural operators as approximate samples from a Gaussian process (GP) posterior. We derive regret bounds and theoretical results connecting neural operators with GPs in infinite-dimensional settings. Experiments benchmark our method against other Bayesian optimization baselines on functional optimization tasks involving partial differential equations of physical systems, demonstrating better sample efficiency and significant performance gains.

Prompting techniques such as chain-of-thought have established themselves as a popular vehicle for improving the outputs of large language models (LLMs). For code generation, however, their exact mechanics and efficacy are under-explored. We thus investigate the effects of a wide range of prompting strategies with a focus on automatic re-prompting over multiple turns and computational requirements. After systematically decomposing reasoning, instruction, and execution feedback prompts, we conduct an extensive grid search on the competitive programming benchmarks CodeContests and TACO for multiple LLM families and sizes (Llama 3.0 and 3.1, 8B, 70B, 405B, and GPT-4o). Our study reveals strategies that consistently improve performance across all models with small and large sampling budgets. We then show how finetuning with such an optimal configuration allows models to internalize the induced reasoning process and obtain improvements in performance and scalability for multi-turn code generation.

Large language models (LLMs) are aligned with human preferences by reinforcement learning from human feedback (RLHF). Effective data sampling is crucial for RLHF, as it determines the efficiency of model training, ensuring that models learn from the informative samples. To achieve better data generation, we propose a new sampling method called Preference-Guided Reflective Sampling (PRS). PRS frames the response generation as an optimization process to the explicitly specified user preference described in natural language. It employs a tree-based generation framework to enable an efficient sampling process, which guides the direction of generation through preference and better explores the sampling space with adaptive self-refinement. Notably, PRS can align LLMs to diverse preferences. We study preference-controlled text generation for instruction following and keyword-focused document summarization. Our findings indicate that PRS, across different LLM policies, generates training data with much higher rewards than strong baselines. PRS also excels in post-RL training.

As agent capabilities advance, existing benchmarks, such as τ^2-Bench, are becoming increasingly saturated. Yet constructing new benchmark tasks remains complex, costly, and labor-intensive. Moreover, the standard approach, in which scenarios are first written in natural language and then mapped to tool sequences, captures only a narrow subset of the tool-use patterns agents exercise. In this paper, we address these problems by reversing the task construction process. We propose TASTE: Task Synthesis from Tool Sequence Evolution, an automatic method that generates challenging tasks with broader tool-use coverage. TASTE utilizes an Adaptive Contrastive n-gram model trained on LLM-judged validity signals. This enables sampling valid tool sequences that cover a vast range of tool combinations. TASTE then selects representative sequences from the pool via clustering, instantiates them into complete benchmark tasks, and refines them through iterative difficulty evolution. Using TASTE, we construct τ^c-Bench, a challenging extension of the three domains of τ^2-Bench. We evaluate 11 agent/user LLM pairs and find that models nearly saturating τ^2-Bench suffer severe performance drops on our tasks (e.g., Gemini-3-Flash falls from 0.82!-!0.94 to 0.28!-!0.61). Beyond increasing difficulty, our generated tasks more than double the number of unique tool combinations agents must execute. Our results suggest high scores on existing benchmarks often reflect saturation rather than robust task-solving ability. By automating the generation of difficult, high-coverage benchmarks, TASTE enables continuous, scalable evaluation of future agents.

Chain-of-thought (CoT) reasoning in large language models (LLMs) can be formalized as a latent variable problem, where the model needs to generate intermediate reasoning steps. While prior approaches such as iterative reward-ranked fine-tuning (RAFT) have relied on such formulations, they typically apply uniform inference budgets across prompts, which fails to account for variability in difficulty and convergence behavior. This work identifies the main bottleneck in CoT training as inefficient stochastic gradient estimation due to static sampling strategies. We propose GVM-RAFT, a prompt-specific Dynamic Sample Allocation Strategy designed to minimize stochastic gradient variance under a computational budget constraint. The method dynamically allocates computational resources by monitoring prompt acceptance rates and stochastic gradient norms, ensuring that the resulting gradient variance is minimized. Our theoretical analysis shows that the proposed dynamic sampling strategy leads to accelerated convergence guarantees under suitable conditions. Experiments on mathematical reasoning show that GVM-RAFT achieves a 2-4x speedup and considerable accuracy improvements over vanilla RAFT. The proposed dynamic sampling strategy is general and can be incorporated into other reinforcement learning algorithms, such as GRPO, leading to similar improvements in convergence and test accuracy. Our code is available at https://github.com/RLHFlow/GVM.

We present an approach called Q-probing to adapt a pre-trained language model to maximize a task-specific reward function. At a high level, Q-probing sits between heavier approaches such as finetuning and lighter approaches such as few shot prompting, but can also be combined with either. The idea is to learn a simple linear function on a model's embedding space that can be used to reweight candidate completions. We theoretically show that this sampling procedure is equivalent to a KL-constrained maximization of the Q-probe as the number of samples increases. To train the Q-probes we consider either reward modeling or a class of novel direct policy learning objectives based on importance weighted policy gradients. With this technique, we see gains in domains with ground-truth rewards (code generation) as well as implicit rewards defined by preference data, even outperforming finetuning in data-limited regimes. Moreover, a Q-probe can be trained on top of an API since it only assumes access to sampling and embeddings. Code: https://github.com/likenneth/q_probe .

Large Language Models (LLMs) have already been widely adopted for automated algorithm design, demonstrating strong abilities in generating and evolving algorithms across various fields. Existing work has largely focused on examining their effectiveness in solving specific problems, with search strategies primarily guided by adaptive prompt designs. In this paper, through investigating the token-wise attribution of the prompts to LLM-generated algorithmic codes, we show that providing high-quality algorithmic code examples can substantially improve the performance of the LLM-driven optimization. Building upon this insight, we propose leveraging prior benchmark algorithms to guide LLM-driven optimization and demonstrate superior performance on two black-box optimization benchmarks: the pseudo-Boolean optimization suite (pbo) and the black-box optimization suite (bbob). Our findings highlight the value of integrating benchmarking studies to enhance both efficiency and robustness of the LLM-driven black-box optimization methods.

Reinforcement learning is the method of choice to train models in sampling-based setups with binary outcome feedback, such as navigation, code generation, and mathematical problem solving. In such settings, models implicitly induce a likelihood over correct rollouts. However, we observe that reinforcement learning does not maximize this likelihood, and instead optimizes only a lower-order approximation. Inspired by this observation, we introduce Maximum Likelihood Reinforcement Learning (MaxRL), a sampling-based framework to approximate maximum likelihood using reinforcement learning techniques. MaxRL addresses the challenges of non-differentiable sampling by defining a compute-indexed family of sample-based objectives that interpolate between standard reinforcement learning and exact maximum likelihood as additional sampling compute is allocated. The resulting objectives admit a simple, unbiased policy-gradient estimator and converge to maximum likelihood optimization in the infinite-compute limit. Empirically, we show that MaxRL Pareto-dominates existing methods in all models and tasks we tested, achieving up to 20x test-time scaling efficiency gains compared to its GRPO-trained counterpart. We also observe MaxRL to scale better with additional data and compute. Our results suggest MaxRL is a promising framework for scaling RL training in correctness based settings.

Generations from large language models often fail to conform to desired constraints such as JSON schema. Existing locally constrained decoding (LCD) approaches enforce constraints by myopically masking out next tokens, resulting in biased sampling and degradation in performance. Recent work uses sequential Monte Carlo (SMC) methods to mitigate such biases, but designing effective proposal distributions or potential functions remains a key challenge. In this work, we propose a generic approach to construct proposals and potentials for SMC sampling from p_{lm}( cdot mid constraint). First, we show that constraints specified as finite automata can be tensorized for efficient execution on GPUs, which we use to construct globally constrained decoding (GCD) proposals. In addition, leveraging the fact that tensorized finite automata share the same circuit structure as hidden Markov models, we circuit-multiply them to obtain the probabilistic GCD (P-GCD) proposals encoding both logical and probabilistic information about the target distributions. We evaluate (P-)GCD on the tasks of function calling, keyword-based generation, and SQL generation. Experiments show that under the same SMC sampling setup, compared to LCD proposals, (P-)GCD converges faster to the target distribution with significantly fewer particles.

Large Language Models (LLMs) have shown remarkable capabilities, with optimizing their input prompts playing a pivotal role in maximizing their performance. However, while LLM prompts consist of both the task-agnostic system prompts and task-specific user prompts, existing work on prompt optimization has focused on user prompts specific to individual queries or tasks, and largely overlooked the system prompt that is, once optimized, applicable across different tasks and domains. Motivated by this, we introduce the novel problem of bilevel system prompt optimization, whose objective is to design system prompts that are robust to diverse user prompts and transferable to unseen tasks. To tackle this problem, we then propose a meta-learning framework, which meta-learns the system prompt by optimizing it over various user prompts across multiple datasets, while simultaneously updating the user prompts in an iterative manner to ensure synergy between them. We conduct experiments on 14 unseen datasets spanning 5 different domains, on which we show that our approach produces system prompts that generalize effectively to diverse user prompts. Also, our findings reveal that the optimized system prompt enables rapid adaptation even to unseen tasks, requiring fewer optimization steps for test-time user prompts while achieving improved performance.

Despite their ubiquity in language generation, it remains unknown why truncation sampling heuristics like nucleus sampling are so effective. We provide a theoretical explanation for the effectiveness of the truncation sampling by proving that truncation methods that discard tokens below some probability threshold (the most common type of truncation) can guarantee that all sampled tokens have nonzero true probability. However, thresholds are a coarse heuristic, and necessarily discard some tokens with nonzero true probability as well. In pursuit of a more precise sampling strategy, we show that we can leverage a known source of model errors, the softmax bottleneck, to prove that certain tokens have nonzero true probability, without relying on a threshold. Based on our findings, we develop an experimental truncation strategy and the present pilot studies demonstrating the promise of this type of algorithm. Our evaluations show that our method outperforms its threshold-based counterparts under automatic and human evaluation metrics for low-entropy (i.e., close to greedy) open-ended text generation. Our theoretical findings and pilot experiments provide both insight into why truncation sampling works, and make progress toward more expressive sampling algorithms that better surface the generative capabilities of large language models.

The integration of large language models (LLMs) into automated algorithm design has shown promising potential. A prevalent approach embeds LLMs within search routines to iteratively generate and refine candidate algorithms. However, most existing methods rely on off-the-shelf LLMs trained for general coding tasks, leaving a key question open: Do we need LLMs specifically tailored for algorithm design? If so, how can such LLMs be effectively obtained and how well can they generalize across different algorithm design tasks? In this paper, we take a preliminary step toward answering these questions by exploring fine-tuning of LLMs for algorithm design. We introduce a Diversity-Aware Rank-based (DAR) sampling strategy to balance training data diversity and quality, then we leverage direct preference optimization to efficiently align LLM outputs with task objectives. Our experiments are primarily conducted on Llama-3.2-1B-Instruct and Llama-3.1-8BInstruct across three distinct algorithm design tasks, with openPangu-Embedded models additionally included as auxiliary comparisons on the admissible set problem. Results suggest that fine-tuned LLMs can significantly outperform their off-the-shelf counterparts with the smaller Llama-3.2-1B-Instruct and match the larger Llama-3.1-8B-Instruct on the admissible set problem. Moreover, we observe promising generalization: LLMs fine-tuned on specific algorithm design tasks also improve performance on related tasks with varying settings. These findings highlight the value of task-specific adaptation for LLMs in algorithm design and open new avenues for future research. Our code is publicly available at https://github.com/RayZhhh/dpo-aad.

Prompt optimization (PO) offers a practical alternative to fine-tuning large language models (LLMs), enabling performance improvements without altering model weights. Existing methods typically rely on advanced, large-scale LLMs like GPT-4 to generate optimized prompts. However, due to limited downward compatibility, verbose, instruction-heavy prompts from advanced LLMs can overwhelm lightweight inference models and degrade response quality. In this work, we rethink prompt optimization through the lens of interpretable design. We first identify a set of model-agnostic prompt quality merits and empirically validate their effectiveness in enhancing prompt and response quality. We then introduce MePO, a merit-guided, lightweight, and locally deployable prompt optimizer trained on our preference dataset built from merit-aligned prompts generated by a lightweight LLM. Unlike prior work, MePO avoids online optimization reliance, reduces cost and privacy concerns, and, by learning clear, interpretable merits, generalizes effectively to both large-scale and lightweight inference models. Experiments demonstrate that MePO achieves better results across diverse tasks and model types, offering a scalable and robust solution for real-world deployment. Our model and dataset are available at: https://github.com/MidiyaZhu/MePO

Large language models (LLMs) have demonstrated strong capabilities in language understanding and reasoning, yet they remain limited when tackling real-world tasks that require up-to-date knowledge, precise operations, or specialized tool use. To address this, we propose Tool-R1, a reinforcement learning framework that enables LLMs to perform general, compositional, and multi-step tool use by generating executable Python code. Tool-R1 supports integration of user-defined tools and standard libraries, with variable sharing across steps to construct coherent workflows. An outcome-based reward function, combining LLM-based answer judgment and code execution success, guides policy optimization. To improve training efficiency, we maintain a dynamic sample queue to cache and reuse high-quality trajectories, reducing the overhead of costly online sampling. Experiments on the GAIA benchmark show that Tool-R1 substantially improves both accuracy and robustness, achieving about 10\% gain over strong baselines, with larger improvements on complex multi-step tasks. These results highlight the potential of Tool-R1 for enabling reliable and efficient tool-augmented reasoning in real-world applications. Our code will be available at https://github.com/YBYBZhang/Tool-R1.

LLMs are widely used for code generation and mathematical reasoning tasks where they are required to generate structured output. They either need to reason about code, generate code for a given specification, or reason using programs of thought. The typical approach to code generation is to prompt the model and generate samples until an appropriate program is obtained. Within this process, sampling n programs from the language model requires n GPU compute-intensive generations which becomes prohibitively expensive for larger values of n. In this work, we address this limitation by exposing the LLM's distribution within the generated programs themselves. We propose a novel test-time framework we dub probabilistic programs of thought to obtain more samples from the model with fewer LLM generations. Given a program generated by a model and the associated next-token probabilities, we build a probabilistic program that compactly represents exponentially many deterministic programs. Since performing probabilistic reasoning in this probabilistic program is much cheaper, our approach allows sampling new programs without any additional GPU compute and little CPU overhead. We instantiate our approach on benchmarks for code generation, code understanding and mathematical reasoning and report improvements in performance with fewer generations from the LLM.

Improving the alignment of language models with human preferences remains an active research challenge. Previous approaches have primarily utilized Reinforcement Learning from Human Feedback (RLHF) via online RL methods such as Proximal Policy Optimization (PPO). Recently, offline methods such as Sequence Likelihood Calibration (SLiC) and Direct Preference Optimization (DPO) have emerged as attractive alternatives, offering improvements in stability and scalability while maintaining competitive performance. SLiC refines its loss function using sequence pairs sampled from a supervised fine-tuned (SFT) policy, while DPO directly optimizes language models based on preference data, foregoing the need for a separate reward model. However, the maximum likelihood estimator (MLE) of the target optimal policy requires labeled preference pairs sampled from that policy. DPO's lack of a reward model constrains its ability to sample preference pairs from the optimal policy, and SLiC is restricted to sampling preference pairs only from the SFT policy. To address these limitations, we introduce a novel approach called Statistical Rejection Sampling Optimization (RSO) that aims to source preference data from the target optimal policy using rejection sampling, enabling a more accurate estimation of the optimal policy. We also propose a unified framework that enhances the loss functions used in both SLiC and DPO from a preference modeling standpoint. Through extensive experiments across three diverse tasks, we demonstrate that RSO consistently outperforms both SLiC and DPO on evaluations from both Large Language Model (LLM) and human raters.

The training of large language models (LLMs) is expensive. In this paper, we study data-efficient approaches for pre-training LLMs, i.e., techniques that aim to optimize the Pareto frontier of model quality and training resource/data consumption. We seek to understand the tradeoffs associated with data selection routines based on (i) expensive-to-compute data-quality estimates, and (ii) maximization of coverage and diversity-based measures in the feature space. Our first technique, Ask-LLM, leverages the zero-shot reasoning capabilities of instruction-tuned LLMs to directly assess the quality of a training example. To target coverage, we propose Density sampling, which models the data distribution to select a diverse sample. In our comparison of 19 samplers, involving hundreds of evaluation tasks and pre-training runs, we find that Ask-LLM and Density are the best methods in their respective categories. Coverage sampling can recover the performance of the full data, while models trained on Ask-LLM data consistently outperform full-data training -- even when we reject 90% of the original dataset, while converging up to 70% faster.

Mixture-of-Experts (MoE) models have shown remarkable capability in instruction tuning, especially when the number of tasks scales. However, previous methods simply merge all training tasks (e.g. creative writing, coding, and mathematics) and apply fixed sampling weights, without considering the importance of different tasks as the model training state changes. In this way, the most helpful data cannot be effectively distinguished, leading to suboptimal model performance. To reduce the potential redundancies of datasets, we make the first attempt and propose a novel dynamic data mixture for MoE instruction tuning. Specifically, inspired by MoE's token routing preference, we build dataset-level representations and then capture the subtle differences among datasets. Finally, we propose to dynamically adjust the sampling weight of datasets by their inter-redundancies, thus maximizing global performance under a limited training budget. The experimental results on two MoE models demonstrate the effectiveness of our approach on both downstream knowledge \& reasoning tasks and open-ended queries. Code and models are available at https://github.com/Spico197/MoE-SFT .

Recent advancements in aligning large language models via reinforcement learning have achieved remarkable gains in solving complex reasoning problems, but at the cost of expensive on-policy rollouts and limited exploration of diverse reasoning paths. In this work, we introduce TreePO, involving a self-guided rollout algorithm that views sequence generation as a tree-structured searching process. Composed of dynamic tree sampling policy and fixed-length segment decoding, TreePO leverages local uncertainty to warrant additional branches. By amortizing computation across common prefixes and pruning low-value paths early, TreePO essentially reduces the per-update compute burden while preserving or enhancing exploration diversity. Key contributions include: (1) a segment-wise sampling algorithm that alleviates the KV cache burden through contiguous segments and spawns new branches along with an early-stop mechanism; (2) a tree-based segment-level advantage estimation that considers both global and local proximal policy optimization. and (3) analysis on the effectiveness of probability and quality-driven dynamic divergence and fallback strategy. We empirically validate the performance gain of TreePO on a set reasoning benchmarks and the efficiency saving of GPU hours from 22\% up to 43\% of the sampling design for the trained models, meanwhile showing up to 40\% reduction at trajectory-level and 35\% at token-level sampling compute for the existing models. While offering a free lunch of inference efficiency, TreePO reveals a practical path toward scaling RL-based post-training with fewer samples and less compute. Home page locates at https://m-a-p.ai/TreePO.

Optimizing complex systems, ranging from LLM prompts to multi-turn agents, traditionally requires labor-intensive manual iteration. We formalize this challenge as a stochastic generative optimization problem where a generative language model acts as the optimizer, guided by numerical rewards and text feedback to discover the best system. We introduce Prioritized Optimization with Local Contextual Aggregation (POLCA), a scalable framework designed to handle stochasticity in optimization -- such as noisy feedback, sampling minibatches, and stochastic system behaviors -- while effectively managing the unconstrained expansion of solution space. POLCA maintains a priority queue to manage the exploration-exploitation tradeoff, systematically tracking candidate solutions and their evaluation histories. To enhance efficiency, we integrate an varepsilon-Net mechanism to maintain parameter diversity and an LLM Summarizer to perform meta-learning across historical trials. We theoretically prove that POLCA converges to near-optimal candidate solutions under stochasticity. We evaluate our framework on diverse benchmarks, including τ-bench, HotpotQA (agent optimization), VeriBench (code translation) and KernelBench (CUDA kernel generation). Experimental results demonstrate that POLCA achieves robust, sample and time-efficient performance, consistently outperforming state-of-the-art algorithms in both deterministic and stochastic problems. The codebase for this work is publicly available at https://github.com/rlx-lab/POLCA.

Large language models (LLMs), despite their impressive performance across a wide range of tasks, often struggle to balance two competing objectives in open-ended text generation: fostering diversity and creativity while preserving logical coherence. Existing truncated sampling techniques, including temperature scaling, top-\p (nucleus) sampling, and min-\p sampling, aim to manage this trade-off. However, they exhibit limitations, particularly in the effective incorporation of the confidence of the model into the corresponding sampling strategy. For example, min-\p sampling relies on a single top token as a heuristic for confidence, eventually underutilizing the information of the probability distribution. Toward effective incorporation of the confidence of the model, in this paper, we present **top-H** decoding. We first establish the theoretical foundation of the interplay between creativity and coherence in truncated sampling by formulating an **entropy-constrained minimum divergence** problem. We then prove this minimization problem to be equivalent to an **entropy-constrained mass maximization** (ECMM) problem, which is NP-hard. Finally, we present top-H decoding, a computationally efficient greedy algorithm to solve the ECMM problem. Extensive empirical evaluations demonstrate that top-H outperforms the state-of-the-art (SoTA) alternative of min-\p sampling by up to **25.63%** on creative writing benchmarks, while maintaining robustness on question-answering datasets such as GPQA, GSM8K, and MT-Bench. Additionally, an *LLM-as-judge* evaluation confirms that top-H indeed produces coherent outputs even at higher temperatures, where creativity is especially critical. In summary, top-H advances SoTA in open-ended text generation and can be *easily integrated* into creative writing applications. The code is available at https://github.com/ErfanBaghaei/Top-H-Decoding.

Reinforcement learning (RL) is essential for adaptive decision-making, e.g., robust Meta-RL and domain randomization (DR), and efficient post-training of large language models (LLMs), where tasks are commonly structured as Markov decision processes or prompts. A central bottleneck in all these settings is the cost of agent-environment interactions required for task selection and policy optimization. Model predictive task sampling (MPTS) has emerged as a promising approach to improve sample efficiency by querying informative tasks via a risk predictive model (RPM) trained on optimization history. However, existing RPMs suffer from two failure modes: (i) sparse optimization histories, which limit RPMs' generalization across the task space, and (ii) a one-step lag in risk approximation, which causes biased difficulty estimation as the policy evolves. This work formalizes these failure modes, derives lagged-risk decompositions that expose the resulting temporal bias, and recasts risk prediction as an in-context sequence modeling problem. The developed RPM integrates a one-step look-ahead mechanism with a temporal-weighted sliding window to mitigate data non-stationarity and scarcity, without requiring additional rollouts. Empirically, our approach yields more reliable difficulty estimates and consistent performance gains across robust Meta-RL, DR, and prompt curriculum RL post-training of LLMs.

Recent advancements in large language models have significantly improved their reasoning abilities, particularly through techniques involving search and backtracking. Backtracking naturally scales test-time compute by enabling sequential, linearized exploration via long chain-of-thought (CoT) generation. However, this is not the only strategy for scaling test-time compute: parallel sampling with best-of-n selection provides an alternative that generates diverse solutions simultaneously. Despite the growing adoption of sequential search, its advantages over parallel sampling--especially under a fixed compute budget remain poorly understood. In this paper, we systematically compare these two approaches on two challenging reasoning tasks: CountDown and Sudoku. Surprisingly, we find that sequential search underperforms parallel sampling on CountDown but outperforms it on Sudoku, suggesting that backtracking is not universally beneficial. We identify two factors that can cause backtracking to degrade performance: (1) training on fixed search traces can lock models into suboptimal strategies, and (2) explicit CoT supervision can discourage "implicit" (non-verbalized) reasoning. Extending our analysis to reinforcement learning (RL), we show that models with backtracking capabilities benefit significantly from RL fine-tuning, while models without backtracking see limited, mixed gains. Together, these findings challenge the assumption that backtracking universally enhances LLM reasoning, instead revealing a complex interaction between task structure, training data, model scale, and learning paradigm.

Large Language Models (LLMs) exhibit strong generalization capabilities to novel tasks when prompted with language instructions and in-context demos. Since this ability sensitively depends on the quality of prompts, various methods have been explored to automate the instruction design. While these methods demonstrated promising results, they also restricted the searched prompt to one instruction. Such simplification significantly limits their capacity, as a single demo-free instruction might not be able to cover the entire complex problem space of the targeted task. To alleviate this issue, we adopt the Mixture-of-Expert paradigm and divide the problem space into a set of sub-regions; Each sub-region is governed by a specialized expert, equipped with both an instruction and a set of demos. A two-phase process is developed to construct the specialized expert for each region: (1) demo assignment: Inspired by the theoretical connection between in-context learning and kernel regression, we group demos into experts based on their semantic similarity; (2) instruction assignment: A region-based joint search of an instruction per expert complements the demos assigned to it, yielding a synergistic effect. The resulting method, codenamed Mixture-of-Prompts (MoP), achieves an average win rate of 81% against prior arts across several major benchmarks.

Power-sharpened sampling is an inference-time alternative to reinforcement-learning (RL) post-training for enhancing reasoning in large language models (LLMs). High-probability sequences are amplified under the base model without parameter updates or external rewards, avoiding the costly optimization and jagged generalization of RL. However, this approach faces a fundamental exploration--exploitation trade-off, as % strong sharpening restricts exploration, trapping samplers in plausible but incorrect reasoning trajectories, whereas weak sharpening leaves the answer distribution diffuse. To resolve this trade-off, we introduce Parallel Power Tempering (PPT), instantiating power-sharpened LLM sampling via parallel tempering. Running multiple interacting replicas in parallel at different sharpening levels allows lower-power replicas to explore diverse reasoning trajectories and higher-power chains to further exploit higher-likelihood responses favored by the sharpened target. Specifically, we tailor to inference-time sampling by mitigating a truncation bias, identified in prior power samplers, and investigate effective swap strategies under finite memory and compute budgets. Extensive experimentation shows that substantially improves single-chain power-sharpened sampling and outperforms RL-post-trained models, producing higher-quality reasoning traces and even achieving performance comparable to frontier models.

Decoding methods for large language models often trade-off between diversity of outputs and parallelism of computation. Methods such as beam search and Gumbel top-k sampling can guarantee a different output for each element of the beam, but are not easy to parallelize. Alternatively, methods such as temperature sampling and its modifications (top-k sampling, nucleus sampling, typical decoding, and others), are embarrassingly parallel, but have no guarantees about duplicate samples. We present a framework for sampling according to an arithmetic code book implicitly defined by a large language model, compatible with common sampling variations, with provable beam diversity under certain conditions, as well as being embarrassingly parallel and providing unbiased and consistent expectations from the original model. We demonstrate the effectiveness of our approach on WMT machine translation, more than halving the standard deviation when estimating expected BLEU score reward, and closing the BLEU score gap between independent sampling and beam search by up to 63%.

Well-designed prompts are crucial for enhancing Large language models' (LLMs) reasoning capabilities while aligning their outputs with task requirements across diverse domains. However, manually designed prompts require expertise and iterative experimentation. While existing prompt optimization methods aim to automate this process, they rely heavily on external references such as ground truth or by humans, limiting their applicability in real-world scenarios where such data is unavailable or costly to obtain. To address this, we propose Self-Supervised Prompt Optimization (SPO), a cost-efficient framework that discovers effective prompts for both closed and open-ended tasks without requiring external reference. Motivated by the observations that prompt quality manifests directly in LLM outputs and LLMs can effectively assess adherence to task requirements, we derive evaluation and optimization signals purely from output comparisons. Specifically, SPO selects superior prompts through pairwise output comparisons evaluated by an LLM evaluator, followed by an LLM optimizer that aligns outputs with task requirements. Extensive experiments demonstrate that SPO outperforms state-of-the-art prompt optimization methods, achieving comparable or superior results with significantly lower costs (e.g., 1.1% to 5.6% of existing methods) and fewer samples (e.g., three samples). The code is available at https://github.com/geekan/MetaGPT.

Prompt engineering is very important to enhance the performance of large language models (LLMs). When dealing with complex issues, prompt engineers tend to distill multiple patterns from examples and inject relevant solutions to optimize the prompts, achieving satisfying results. However, existing automatic prompt optimization techniques are only limited to producing single flow instructions, struggling with handling diverse patterns. In this paper, we present AMPO, an automatic prompt optimization method that can iteratively develop a multi-branched prompt using failure cases as feedback. Our goal is to explore a novel way of structuring prompts with multi-branches to better handle multiple patterns in complex tasks, for which we introduce three modules: Pattern Recognition, Branch Adjustment, and Branch Pruning. In experiments across five tasks, AMPO consistently achieves the best results. Additionally, our approach demonstrates significant optimization efficiency due to our adoption of a minimal search strategy.

Reinforcement learning (RL) is emerging as a powerful paradigm for enabling large language models (LLMs) to perform complex reasoning tasks. Recent advances indicate that integrating RL with retrieval-augmented generation (RAG) allows LLMs to dynamically incorporate external knowledge, leading to more informed and robust decision making. However, we identify a critical challenge during policy-driven trajectory sampling: LLMs are frequently trapped in unproductive reasoning paths, which we refer to as "dead ends", committing to overconfident yet incorrect conclusions. This severely hampers exploration and undermines effective policy optimization. To address this challenge, we propose REX-RAG (Reasoning Exploration with Policy Correction in Retrieval-Augmented Generation), a novel framework that explores alternative reasoning paths while maintaining rigorous policy learning through principled distributional corrections. Our approach introduces two key innovations: (1) Mixed Sampling Strategy, which combines a novel probe sampling method with exploratory prompts to escape dead ends; and (2) Policy Correction Mechanism, which employs importance sampling to correct distribution shifts induced by mixed sampling, thereby mitigating gradient estimation bias. We evaluate it on seven question-answering benchmarks, and the experimental results show that REX-RAG achieves average performance gains of 5.1% on Qwen2.5-3B and 3.6% on Qwen2.5-7B over strong baselines, demonstrating competitive results across multiple datasets. The code is publicly available at https://github.com/MiliLab/REX-RAG.

We propose a novel approach to scaling LLM inference for code generation. We frame code generation as a black box optimization problem within the code space, and employ optimization-inspired techniques to enhance exploration. Specifically, we introduce Scattered Forest Search to enhance solution diversity while searching for solutions. Our theoretical analysis illustrates how these methods avoid local optima during optimization. Extensive experiments on HumanEval, MBPP, APPS, CodeContests, and Leetcode reveal significant performance improvements. For instance, our method achieves a pass@1 rate of 67.1% on HumanEval+ and 87.2% on HumanEval with GPT-3.5, marking improvements of 8.6% and 4.3% over the state-of-the-art, while also halving the iterations needed to find the correct solution. Furthermore, our method scales more efficiently than existing search techniques, including tree search, line search, and repeated sampling.

Large Language Models (LLMs) generate functionally correct solutions but often fall short in code efficiency, a critical bottleneck for real-world deployment. In this paper, we introduce a novel test-time iterative optimization framework to address this, employing a closed-loop system where LLMs iteratively refine code based on empirical performance feedback from an execution sandbox. We explore three training strategies: Supervised Fine-Tuning (SFT), Direct Preference Optimization (DPO), and Group Relative Policy Optimization~(GRPO). Experiments on our Venus dataset and the APPS benchmark show that SFT and DPO rapidly saturate in efficiency gains. In contrast, GRPO, using reinforcement learning (RL) with execution feedback, continuously optimizes code performance, significantly boosting both pass@1 (from 47% to 62%) and the likelihood of outperforming human submissions in efficiency (from 31% to 45%). Our work demonstrates effective test-time code efficiency improvement and critically reveals the power of RL in teaching LLMs to truly self-improve code efficiency.

Agentic applications based on large language models increasingly rely on multi-step interaction loops involving planning, action execution, and environment feedback. While such systems are now deployed at scale, improving them post-deployment remains challenging. Agent trajectories are voluminous and non-deterministic, and reviewing each one, whether through human review or auxiliary LLMs, is slow and cost-prohibitive. We propose a lightweight, signal-based framework for triaging agentic interaction trajectories. Our approach computes cheap, broadly applicable signals from live interactions and attaches them as structured attributes for trajectory triage, identifying interactions likely to be informative without affecting online agent behavior. We organize signals into a coarse-grained taxonomy spanning interaction (misalignment, stagnation, disengagement, satisfaction), execution (failure, loop), and environment (exhaustion), designed for computation without model calls. In a controlled annotation study on τ-bench, a widely used benchmark for tool-augmented agent evaluation, we show that signal-based sampling achieves an 82\% informativeness rate compared to 74\% for heuristic filtering and 54\% for random sampling, with a 1.52x efficiency gain per informative trajectory. The advantage is robust across reward strata and task domains, confirming that signals provide genuine per-trajectory informativeness gains rather than merely oversampling obvious failures. These results show that lightweight signals can serve as practical sampling infrastructure for agentic systems, and suggest a path toward preference data construction and post-deployment optimization.

While scaling laws guide compute allocation for LLM pre-training, analogous prescriptions for reinforcement learning (RL) post-training of large language models (LLMs) remain poorly understood. We study the compute-optimal allocation of sampling compute for on-policy RL methods in LLMs, framing scaling as a compute-constrained optimization over three resources: parallel rollouts per problem, number of problems per batch, and number of update steps. We find that the compute-optimal number of parallel rollouts per problem increases predictably with compute budget and then saturates. This trend holds across both easy and hard problems, though driven by different mechanisms: solution sharpening on easy problems and coverage expansion on hard problems. We further show that increasing the number of parallel rollouts mitigates interference across problems, while the number of problems per batch primarily affects training stability and can be chosen within a broad range. Validated across base models and data distributions, our results recast RL scaling laws as prescriptive allocation rules and provide practical guidance for compute-efficient LLM RL post-training.

We ask whether large language models (LLMs) can design effective algorithms for well-specified operations research (OR) problems. We study inventory control, queueing network control, and assortment optimization, using benchmark instances from recent papers in each area. We evaluate two levels of LLM use: at level 1, the model receives one problem instance and returns a solution for that instance; at level 2, it receives only the problem class description and broad parameter ranges, and returns an algorithm that maps instance parameters to solutions. Human input is minimal: we give one untuned prompt that describes the problem, and the model has access to a Python sandbox tool with a fixed compute budget. The strongest model we test, gpt-5.6-sol, matches or outperforms the best method reported in those papers on almost all evaluated instances. This holds even at level 2, where the returned algorithm is fixed before seeing the evaluation instances. Performance also improves sharply across models released less than eight months apart, suggesting that this capability is moving quickly. Thus, for the well-specified operations problems we study, a single untuned LLM query can already produce algorithms competitive with specialized methods. These results suggest that frontier LLMs can be a serious empirical baseline for algorithm design in well-specified OR problems.

Language Model Programs, i.e. sophisticated pipelines of modular language model (LM) calls, are increasingly advancing NLP tasks, but they require crafting prompts that are jointly effective for all modules. We study prompt optimization for LM programs, i.e. how to update these prompts to maximize a downstream metric without access to module-level labels or gradients. To make this tractable, we factorize our problem into optimizing the free-form instructions and few-shot demonstrations of every module and introduce several strategies to craft task-grounded instructions and navigate credit assignment across modules. Our strategies include (i) program- and data-aware techniques for proposing effective instructions, (ii) a stochastic mini-batch evaluation function for learning a surrogate model of our objective, and (iii) a meta-optimization procedure in which we refine how LMs construct proposals over time. Using these insights we develop MIPRO, a novel algorithm for optimizing LM programs. MIPRO outperforms baseline optimizers on five of seven diverse multi-stage LM programs using a best-in-class open-source model (Llama-3-8B), by as high as 13% accuracy. We have released our new optimizers and benchmark in DSPy at http://dspy.ai

Instruction tuning has emerged as a critical paradigm for improving the capabilities and alignment of large language models (LLMs). However, existing iterative model-aware data selection methods incur significant computational overhead, as they rely on repeatedly performing full-dataset model inference to estimate sample utility for subsequent training iterations, creating a fundamental efficiency bottleneck. In this paper, we propose LEAD, an efficient iterative data selection framework that accurately estimates sample utility entirely within the standard training loop, eliminating the need for costly additional model inference. At its core, LEAD introduces Instance-Level Dynamic Uncertainty (IDU), a theoretically grounded utility function combining instantaneous training loss, gradient-based approximation of loss changes, and exponential smoothing of historical loss signals. To further scale efficiently to large datasets, LEAD employs a two-stage, coarse-to-fine selection strategy, adaptively prioritizing informative clusters through a multi-armed bandit mechanism, followed by precise fine-grained selection of high-utility samples using IDU. Extensive experiments across four diverse benchmarks show that LEAD significantly outperforms state-of-the-art methods, improving average model performance by 6.1%-10.8% while using only 2.5% of the training data and reducing overall training time by 5-10x.

Instruction fine-tuning of large language models (LLMs) often involves selecting a subset of instruction training data from a large candidate pool, using a small query set from the target task. Despite growing interest, the literature on targeted instruction selection remains fragmented and opaque: methods vary widely in selection budgets, often omit zero-shot baselines, and frequently entangle the contributions of key components. As a result, practitioners lack actionable guidance on selecting instructions for their target tasks. In this work, we aim to bring clarity to this landscape by disentangling and systematically analyzing the two core ingredients: data representation and selection algorithms. Our framework enables controlled comparisons across models, tasks, and budgets. We find that only gradient-based data representations choose subsets whose similarity to the query consistently predicts performance across datasets and models. While no single method dominates, gradient-based representations paired with a greedy round-robin selection algorithm tend to perform best on average at low budgets, but these benefits diminish at larger budgets. Finally, we unify several existing selection algorithms as forms of approximate distance minimization between the selected subset and the query set, and support this view with new generalization bounds. More broadly, our findings provide critical insights and a foundation for more principled data selection in LLM fine-tuning. The code is available at https://github.com/dcml-lab/targeted-instruction-selection.

Agentic reinforcement learning has enabled large language models to perform complex multi-turn planning and tool use. However, learning in long-horizon settings remains challenging due to sparse, trajectory-level outcome rewards. While prior tree-based methods attempt to mitigate this issue, they often suffer from high variance and computational inefficiency. Through empirical analysis of search agents, We identify a common pattern: performance diverges mainly due to decisions near the tail. Motivated by this observation, we propose Branching Relative Policy Optimization (BranPO), a value-free method that provides step-level contrastive supervision without dense rewards. BranPO truncates trajectories near the tail and resamples alternative continuations to construct contrastive suffixes over shared prefixes, reducing credit ambiguity in long-horizon rollouts. To further boost efficiency and stabilize training, we introduce difficulty-aware branch sampling to adapt branching frequency across tasks, and redundant step masking to suppress uninformative actions. Extensive experiments on various question answering benchmarks demonstrate that BranPO consistently outperforms strong baselines, achieving significant accuracy gains on long-horizon tasks without increasing the overall training budget. Our code is available at https://github.com/YubaoZhao/BranPO{code}.

We propose ADAPT, a meta-learning algorithm that learns task sampling proportions under an explicit token budget for multi-task instruction tuning. Instead of fixing task weights by hand, maintains a continuous distribution over tasks and updates it via meta-gradients of a smooth worst-case validation objective, inducing an adaptive curriculum that allocates more tokens to useful tasks while avoiding collapse. We instantiate ADAPT on three sim1B-parameter open-weight LLMs (Gemma-3-1B, LLaMA-3.2-1B, Qwen-0.6B), training on 20 Natural Instructions task types under budgets of 1%, 5%, and 10% of the available supervised tokens, and compare against strong supervised fine-tuning baselines with uniform and size-proportional mixing. We conduct evaluations on 11 out-of-domain benchmarks spanning reasoning, reading comprehension, code generation, and instruction following, we find that ADAPT matches or slightly improves average downstream performance relative to the best static mixture, while using fewer effective training tokens and reallocating budget toward harder, benchmark-aligned tasks.

We present a new algorithm to optimize distributions defined implicitly by parameterized stochastic diffusions. Doing so allows us to modify the outcome distribution of sampling processes by optimizing over their parameters. We introduce a general framework for first-order optimization of these processes, that performs jointly, in a single loop, optimization and sampling steps. This approach is inspired by recent advances in bilevel optimization and automatic implicit differentiation, leveraging the point of view of sampling as optimization over the space of probability distributions. We provide theoretical guarantees on the performance of our method, as well as experimental results demonstrating its effectiveness in real-world settings.

We study the design of sample-efficient algorithms for reinforcement learning in the presence of rich, high-dimensional observations, formalized via the Block MDP problem. Existing algorithms suffer from either 1) computational intractability, 2) strong statistical assumptions that are not necessarily satisfied in practice, or 3) suboptimal sample complexity. We address these issues by providing the first computationally efficient algorithm that attains rate-optimal sample complexity with respect to the desired accuracy level, with minimal statistical assumptions. Our algorithm, MusIK, combines systematic exploration with representation learning based on multi-step inverse kinematics, a learning objective in which the aim is to predict the learner's own action from the current observation and observations in the (potentially distant) future. MusIK is simple and flexible, and can efficiently take advantage of general-purpose function approximation. Our analysis leverages several new techniques tailored to non-optimistic exploration algorithms, which we anticipate will find broader use.

While model serving has unlocked unprecedented capabilities, the high cost of serving large-scale models continues to be a significant barrier to widespread accessibility and rapid innovation. Compiler optimizations have long driven substantial performance improvements, but existing compilers struggle with neural workloads due to the exponentially large and highly interdependent space of possible transformations. Although existing stochastic search techniques can be effective, they are often sample-inefficient and fail to leverage the structural context underlying compilation decisions. We set out to investigate the research question of whether reasoning with large language models (LLMs), without any retraining, can leverage the context-aware decision space of compiler optimizations to significantly improve sample efficiency. To that end, we introduce a novel compilation framework (dubbed REASONING COMPILER) that formulates optimization as a sequential, context-aware decision process guided by a large language model and structured Monte Carlo tree search (MCTS). The LLM acts as a proposal mechanism, suggesting hardware-informed transformations that reflect the current program state and accumulated performance feedback. MCTS incorporates the LLM-generated proposals to balance exploration and exploitation, facilitating a structured, context-sensitive traversal of the expansive compiler optimization space. By achieving substantial speedups with markedly fewer samples than leading neural compilers, our approach demonstrates the potential of LLM-guided reasoning to transform the landscape of compiler optimization.

Code optimization is a daunting task that requires a significant level of expertise from experienced programmers. This level of expertise is not sufficient when compared to the rapid development of new hardware architectures. Towards advancing the whole code optimization process, recent approaches rely on machine learning and artificial intelligence techniques. This paper introduces a new framework to decrease the complexity of code optimization. The proposed framework builds on large language models (LLMs) and reinforcement learning (RL) and enables LLMs to receive feedback from their environment (i.e., unit tests) during the fine-tuning process. We compare our framework with existing state-of-the-art models and show that it is more efficient with respect to speed and computational usage, as a result of the decrement in training steps and its applicability to models with fewer parameters. Additionally, our framework reduces the possibility of logical and syntactical errors. Toward evaluating our approach, we run several experiments on the PIE dataset using a CodeT5 language model and RRHF, a new reinforcement learning algorithm. We adopt a variety of evaluation metrics with regards to optimization quality, and speedup. The evaluation results demonstrate that the proposed framework has similar results in comparison with existing models using shorter training times and smaller pre-trained models. In particular, we accomplish an increase of 5.6% and 2.2 over the baseline models concerning the %OP T and SP metrics.

Tool-integrated reasoning (TIR) augments large language models (LLMs) with the ability to invoke external tools, such as search engines and code interpreters, to solve tasks beyond the capabilities of language-only reasoning. While reinforcement learning (RL) has shown promise in improving TIR by optimizing final answer correctness, existing approaches often overlook the efficiency and cost associated with tool usage. This can lead to suboptimal behavior, including excessive tool calls that increase computational and financial overhead, or insufficient tool use that compromises answer quality. In this work, we propose Optimal Tool Call-controlled Policy Optimization (OTC-PO), a simple yet effective RL-based framework that encourages models to produce accurate answers with minimal tool calls. Our method introduces a tool-integrated reward that jointly considers correctness and tool efficiency, promoting high tool productivity. We instantiate this framework within both Proximal Policy Optimization (PPO) and Group Relative Preference Optimization (GRPO), resulting in OTC-PPO and OTC-GRPO. Experiments with Qwen-2.5 and Qwen-Math across multiple QA benchmarks show that our approach reduces tool calls by up to 73.1\% and improves tool productivity by up to 229.4\%, while maintaining comparable answer accuracy. To the best of our knowledge, this is the first RL-based framework that explicitly optimizes tool-use efficiency in TIR.

Command line interface (CLI) agents are emerging as a practical paradigm for agent-computer interaction over evolving filesystems, executable command line programs, and online execution feedback. Recent work has used reinforcement learning (RL) to learn these interaction abilities from verifiable task feedback, yet few methods exploit the native structured attributes of CLI actions as learning signals. Beyond this underused action structure, CLI learning also couples two bottlenecks for coding agents. First, the agent must identify task-relevant evidence in a large codebase from partial observations. Second, sparse terminal rewards must be assigned to the actions that shape a long multi-turn trajectory. We study these bottlenecks through shell-driven information extraction and file editing tasks. For selective observation, we introduce σ-Reveal, an inference-time mechanism that selects token-budgeted context for the same CLI. For credit assignment, we propose Action Advantage Assignment (A^3), a native agentic RL method that preserves the algorithmic complexity of standard agentic RL. A^3 constructs turn-level advantages from episode-level relative feedback, abstract syntax tree (AST) based action sub-chain residuals, and tree-level trajectory margins. To further evaluate this problem setting, we construct ShellOps, a verifiable dataset suite covering CLI tasks in repository environments.

We present evidence of substantial benefit from efficient exploration in gathering human feedback to improve large language models. In our experiments, an agent sequentially generates queries while fitting a reward model to the feedback received. Our best-performing agent generates queries using double Thompson sampling, with uncertainty represented by an epistemic neural network. Our results demonstrate that efficient exploration enables high levels of performance with far fewer queries. Further, both uncertainty estimation and the choice of exploration scheme play critical roles.

Enhancing the instruction-following ability of Large Language Models (LLMs) primarily demands substantial instruction-tuning datasets. However, the sheer volume of these imposes a considerable computational burden and annotation cost. To investigate a label-efficient instruction tuning method that allows the model itself to actively sample subsets that are equally or even more effective, we introduce a self-evolving mechanism DiverseEvol. In this process, a model iteratively augments its training subset to refine its own performance, without requiring any intervention from humans or more advanced LLMs. The key to our data sampling technique lies in the enhancement of diversity in the chosen subsets, as the model selects new data points most distinct from any existing ones according to its current embedding space. Extensive experiments across three datasets and benchmarks demonstrate the effectiveness of DiverseEvol. Our models, trained on less than 8% of the original dataset, maintain or improve performance compared with finetuning on full data. We also provide empirical evidence to analyze the importance of diversity in instruction data and the iterative scheme as opposed to one-time sampling. Our code is publicly available at https://github.com/OFA-Sys/DiverseEvol.git.

The performance of pre-trained masked diffusion models is often constrained by their sampling procedure, which makes decisions irreversible and struggles in low-step generation regimes. We introduce a novel sampling algorithm that works with pre-trained models and, after a lightweight fine-tuning of a single layer, significantly improves sample quality and efficiency. Our method reformulates the generation process using a star-shaped paradigm, which inherently allows for error correction. To make this process effective, we augment it with a learnable re-masking scheduler that intelligently identifies and revises likely errors. This approach yields a substantial quality boost, particularly when using a small number of sampling steps. We extensively ablate key components of our approach and show its usability in different scenarios. In comprehensive experiments on text, and code generation, our sampling algorithm outperforms or matches existing methods.

Training large language models to reason with search engines via reinforcement learning is hindered by a fundamental credit assignment problem: existing methods such as Search-R1 provide only a sparse outcome reward after an entire multi-step trajectory, making it infeasible to attribute success or failure to individual reasoning and retrieval decisions. Process-reward methods like StepSearch alleviate this by introducing step-level supervision, but rely on heuristic rewards such as TF-IDF overlap with gold documents, and still sample k complete trajectories per example, retaining high gradient variance. We propose SLATE, a framework built on two complementary ideas: (1) truncated step-level sampling, which generates k trajectories that share a common prefix and differ only at the next step, and (2) dense LLM-as-judge rewards, which replace heuristic scoring with a capable LLM evaluator that assesses the quality of each reasoning step, search query, and answer, providing richer and more reliable supervision. We theoretically prove that under the same dense reward structure, truncated sampling reduces the variance of advantage estimates by up to a factor of T compared to full-trajectory sampling for T-step trajectories, yielding lower-variance, better-targeted policy gradients. Experiments on seven QA benchmarks confirm that SLATE consistently outperforms both sparse-reward and process-reward baselines, with the largest gains on harder multi-hop tasks and smaller models.

Manipulating next-token probabilities during generation can bypass the safety alignment of large language models. Existing approaches, however, rely on access to model weights or numerical token probabilities and therefore do not apply to interfaces that return only sampled text. Reconstructing probabilities from sampled outputs offers a possible alternative, but finite sampling produces sparse and noisy estimates, while repeating this process at every generation step incurs substantial query costs. Our empirical observations suggest that large distributional changes along successful jailbreak trajectories are concentrated at a small subset of positions, motivating selective control. We introduce , a framework for jailbreaking through text-only continuation interfaces that permit repeated sampling and assistant-prefix continuation. Sample-Based Distribution Reconstruction combines sampled outputs with a prior over unobserved actions to obtain a usable control signal. Risk-Gated Residual Control uses the evolving response prefix to decide when to reconstruct and modify the distribution, concentrating sampling costs at selected positions. Speculative Multi-Token Execution further amortizes target calls by verifying and accepting draft prefixes that require no intervention. Across four target endpoints and three benchmarks, achieves the highest mean score most comparisons against baselines.

Reinforcement Learning (RL) enhances LLM reasoning, yet a paradox emerges as models scale: strong base models saturate standard benchmarks (e.g., MATH), yielding correct but homogeneous solutions. In such environments, the lack of failure cases causes the advantage signal in group-relative algorithms (e.g., GRPO) to vanish, driving policies into mode collapse. To address this, we propose Constrained Uniform Top-K Sampling (CUTS), a parameter-free decoding strategy enforcing structure-preserving exploration. Unlike standard sampling that follows model biases, CUTS flattens the local optimization landscape by sampling uniformly from constrained high-confidence candidates. We integrate this into Mixed-CUTS, a training framework synergizing exploitative and exploratory rollouts to amplify intra-group advantage variance. Experiments on Qwen3 models demonstrate that our approach prevents policy degeneration and significantly boosts out-of-domain generalization. Notably, Mixed-CUTS improves Pass@1 accuracy on the challenging AIME25 benchmark by up to 15.1% over standard GRPO, validating that maintaining diversity within the semantic manifold is critical for rigorous reasoning.

Policy optimization methods are powerful algorithms in Reinforcement Learning (RL) for their flexibility to deal with policy parameterization and ability to handle model misspecification. However, these methods usually suffer from slow convergence rates and poor sample complexity. Hence it is important to design provably sample efficient algorithms for policy optimization. Yet, recent advances for this problems have only been successful in tabular and linear setting, whose benign structures cannot be generalized to non-linearly parameterized policies. In this paper, we address this problem by leveraging recent advances in value-based algorithms, including bounded eluder-dimension and online sensitivity sampling, to design a low-switching sample-efficient policy optimization algorithm, LPO, with general non-linear function approximation. We show that, our algorithm obtains an varepsilon-optimal policy with only O(text{poly(d)}{varepsilon^3}) samples, where varepsilon is the suboptimality gap and d is a complexity measure of the function class approximating the policy. This drastically improves previously best-known sample bound for policy optimization algorithms, O(text{poly(d)}{varepsilon^8}). Moreover, we empirically test our theory with deep neural nets to show the benefits of the theoretical inspiration.

We study adaptive routing of prompts to large language model (LLM) experts to maximize response quality in an online setting with limited feedback. We formulate it as a bandit problem with K actions that represent experts and d features that encode prompts, over a horizon of T rounds. We propose algorithms that strategically select and observe rewards to minimize regret. In the full-information setting, we achieve a regret of O(d T / m), while in the bandit setting we achieve O(d T K / m), where m ll T is a budget on feedback. Our experiments show that we efficiently learn high-quality routing strategies across diverse LLMs from limited feedback.

We evaluate language models on their ability to explore interactive environments under a limited interaction budget. We introduce three parametric tasks with controllable exploration difficulty, spanning continuous and discrete environments. Across state-of-the-art models, we find systematic under-exploration and suboptimal solutions, with performance often significantly worse than simple explore--exploit heuristic baselines and scaling weakly as the budget increases. Finally, we study two lightweight interventions: splitting a fixed budget into parallel executions, which surprisingly improves performance despite a no-gain theoretical result for our tasks, and periodically summarizing the interaction history, which preserves key discoveries and further improves exploration.

Reinforcement learning applied to large language models (LLMs) for reasoning tasks is often bottlenecked by unstable gradient estimates due to fixed and uniform sampling of responses across prompts. Prior work such as GVM-RAFT addresses this by dynamically allocating inference budget per prompt to minimize stochastic gradient variance under a budget constraint. Inspired by this insight, we propose Reinforce-Ada, an adaptive sampling framework for online RL post-training of LLMs that continuously reallocates sampling effort to the prompts with the greatest uncertainty or learning potential. Unlike conventional two-stage allocation methods, Reinforce-Ada interleaves estimation and sampling in an online successive elimination process, and automatically stops sampling for a prompt once sufficient signal is collected. To stabilize updates, we form fixed-size groups with enforced reward diversity and compute advantage baselines using global statistics aggregated over the adaptive sampling phase. Empirical results across multiple model architectures and reasoning benchmarks show that Reinforce-Ada accelerates convergence and improves final performance compared to GRPO, especially when using the balanced sampling variant. Our work highlights the central role of variance-aware, adaptive data curation in enabling efficient and reliable reinforcement learning for reasoning-capable LLMs. Code is available at https://github.com/RLHFlow/Reinforce-Ada.

Rapidly-exploring random trees (RRTs) are popular in motion planning because they find solutions efficiently to single-query problems. Optimal RRTs (RRT*s) extend RRTs to the problem of finding the optimal solution, but in doing so asymptotically find the optimal path from the initial state to every state in the planning domain. This behaviour is not only inefficient but also inconsistent with their single-query nature. For problems seeking to minimize path length, the subset of states that can improve a solution can be described by a prolate hyperspheroid. We show that unless this subset is sampled directly, the probability of improving a solution becomes arbitrarily small in large worlds or high state dimensions. In this paper, we present an exact method to focus the search by directly sampling this subset. The advantages of the presented sampling technique are demonstrated with a new algorithm, Informed RRT*. This method retains the same probabilistic guarantees on completeness and optimality as RRT* while improving the convergence rate and final solution quality. We present the algorithm as a simple modification to RRT* that could be further extended by more advanced path-planning algorithms. We show experimentally that it outperforms RRT* in rate of convergence, final solution cost, and ability to find difficult passages while demonstrating less dependence on the state dimension and range of the planning problem.

Test-time scaling improves LLM reasoning by generating and aggregating multiple candidate answers, yet many pipelines use fixed per-query budgets that spend the same compute on easy and difficult prompts. These fixed budgets are also difficult to inspect because they do not explain why a given prompt receives a particular number of samples. We propose adaptive} test-time scaling with a lightweight fuzzy controller that maps interpretable signals, including estimated prompt complexity and model confidence, to a per-query sampling budget. The controller assigns fewer samples to easier or more confident prompts and more samples to harder or less certain prompts, making inference-time compute inspectable rather than fixed or opaque. We evaluate under a fair-alignment protocol with matched decoding settings and controlled answer selection, and compare against best-of-N, compute-aware scaling, and self-certainty-based baselines on question-answering and mathematical reasoning tasks. Across models and datasets, adaptive fuzzy control improves over several standard baselines and remains close to a selector-matched full-budget control while reducing the average number of samples. These findings suggest that interpretable adaptive sampling is a practical direction for more efficient test-time reasoning in large language models.

Modern optimization in experimental chemistry employs algorithmic search through black-box parameter spaces. Here we demonstrate that pre-trained knowledge in large language models (LLMs) fundamentally changes this paradigm. Using six fully enumerated categorical reaction datasets (768 - 5,684 experiments), we benchmark LLM-guided optimization (LLM-GO) against Bayesian optimization (BO) and random sampling. Frontier LLMs consistently match or exceed BO performance across five single-objective datasets, with advantages growing as parameter complexity increases and high-performing conditions become scarce (<5% of space). BO retains superiority only for explicit multi-objective trade-offs. To understand these contrasting behaviors, we introduce a topology-agnostic information theory framework quantifying sampling diversity throughout optimization campaigns. This analysis reveals that LLMs maintain systematically higher exploration entropy than BO across all datasets while achieving superior performance, with advantages most pronounced in solution-scarce parameter spaces where high-entropy exploration typically fails - suggesting that pre-trained domain knowledge enables more effective navigation of chemical parameter space rather than replacing structured exploration strategies. To enable transparent benchmarking and community validation, we release Iron Mind (https://gomes.andrew.cmu.edu/iron-mind), a no-code platform for side-by-side evaluation of human, algorithmic, and LLM optimization campaigns with public leaderboards and complete trajectories. Our findings establish that LLM-GO excels precisely where traditional methods struggle: complex categorical spaces requiring domain understanding rather than mathematical optimization.

LLM agents operating over massive, dynamic tool libraries rely on effective retrieval, yet standard single-shot dense retrievers struggle with complex requests. These failures primarily stem from the disconnect between abstract user goals and technical documentation, and the limited capacity of fixed-size embeddings to model combinatorial tool compositions. To address these challenges, we propose TOOLQP, a lightweight framework that models retrieval as iterative query planning. Instead of single-shot matching, TOOLQP decomposes instructions into sub-tasks and dynamically generates queries to interact with the retriever, effectively bridging the semantic gap by targeting the specific sub-tasks required for composition. We train TOOLQP using synthetic query trajectories followed by optimization via Reinforcement Learning with Verifiable Rewards (RLVR). Experiments demonstrate that TOOLQP achieves state-of-the-art performance, exhibiting superior zero-shot generalization, robustness across diverse retrievers, and significant improvements in downstream agentic execution.

The efficacy of large language models (LLMs) in understanding and generating natural language has aroused a wide interest in developing prompt-based methods to harness the power of black-box LLMs. Existing methodologies usually prioritize a global optimization for finding the global optimum, which however will perform poorly in certain tasks. This thus motivates us to re-think the necessity of finding a global optimum in prompt optimization. To answer this, we conduct a thorough empirical study on prompt optimization and draw two major insights. Contrasting with the rarity of global optimum, local optima are usually prevalent and well-performed, which can be more worthwhile for efficient prompt optimization (Insight I). The choice of the input domain, covering both the generation and the representation of prompts, affects the identification of well-performing local optima (Insight II). Inspired by these insights, we propose a novel algorithm, namely localized zeroth-order prompt optimization (ZOPO), which incorporates a Neural Tangent Kernel-based derived Gaussian process into standard zeroth-order optimization for an efficient search of well-performing local optima in prompt optimization. Remarkably, ZOPO outperforms existing baselines in terms of both the optimization performance and the query efficiency, which we demonstrate through extensive experiments.

Large language models (LLMs) deployed as agents solve user-specified tasks over multiple steps while keeping the required manual engagement to a minimum. Crucially, such LLMs need to ground their generations in any feedback obtained to reliably achieve desired outcomes. We propose an end-to-end reinforcement learning method for teaching models to leverage execution feedback in the realm of code synthesis, where state-of-the-art LLMs struggle to improve code iteratively compared to independent sampling. We benchmark on competitive programming tasks, where we achieve new start-of-the art results with both small (8B parameters) and large (70B) models while reducing the amount of samples required by an order of magnitude. Our analysis of inference-time behavior demonstrates that our method produces LLMs that effectively leverage automatic feedback over multiple steps.

Bayesian optimization provides sample-efficient global optimization for a broad range of applications, including automatic machine learning, engineering, physics, and experimental design. We introduce BoTorch, a modern programming framework for Bayesian optimization that combines Monte-Carlo (MC) acquisition functions, a novel sample average approximation optimization approach, auto-differentiation, and variance reduction techniques. BoTorch's modular design facilitates flexible specification and optimization of probabilistic models written in PyTorch, simplifying implementation of new acquisition functions. Our approach is backed by novel theoretical convergence results and made practical by a distinctive algorithmic foundation that leverages fast predictive distributions, hardware acceleration, and deterministic optimization. We also propose a novel "one-shot" formulation of the Knowledge Gradient, enabled by a combination of our theoretical and software contributions. In experiments, we demonstrate the improved sample efficiency of BoTorch relative to other popular libraries.

Current language models generate chain-of-thought traces by autoregressively sampling tokens from a finite vocabulary. While this discrete sampling has achieved remarkable success, conducting chain-of-thought with continuously-valued tokens (CoT2) offers a richer and more expressive alternative. Our work examines the benefits of CoT2 through logical reasoning tasks that inherently require search capabilities and provide optimization and exploration methods for CoT2. Theoretically, we show that CoT2 allows the model to track multiple traces in parallel and quantify its benefits for inference efficiency. Notably, one layer transformer equipped with CoT2 can provably solve the combinatorial "subset sum problem" given sufficient embedding dimension. These insights lead to a novel and effective supervision strategy where we match the softmax outputs to the empirical token distributions of a set of target traces. Complementing this, we introduce sampling strategies that unlock policy optimization and self-improvement for CoT2. Our first strategy samples and composes K discrete tokens at each decoding step to control the level of parallelism, and reduces to standard CoT when K=1. Our second strategy relies on continuous exploration over the probability simplex. Experiments confirm that policy optimization with CoT2 indeed improves the performance of the model beyond its initial discrete or continuous supervision.

Iterative data generation and model retraining are widely used to align large language models (LLMs). It typically involves a policy model to generate on-policy responses and a reward model to guide training data selection. Direct Preference Optimization (DPO) further enhances this process by constructing preference pairs of chosen and rejected responses. In this work, we aim to scale up the number of on-policy samples via repeated random sampling to improve alignment performance. Conventional practice selects the sample with the highest reward as chosen and the lowest as rejected for DPO. However, our experiments reveal that this strategy leads to a decline in performance as the sample size increases. To address this, we investigate preference data construction through the lens of underlying normal distribution of sample rewards. We categorize the reward space into seven representative points and systematically explore all 21 (C_7^2) pairwise combinations. Through evaluations on four models using AlpacaEval 2, we find that selecting the rejected response at reward position mu - 2sigma rather than the minimum reward, is crucial for optimal performance. We finally introduce a scalable preference data construction strategy that consistently enhances model performance as the sample scale increases.

Applying Reinforcement Learning (RL) to sequence generation models enables the direct optimization of long-term rewards (e.g., BLEU and human feedback), but typically requires large-scale sampling over a space of action sequences. This is a computational challenge as presented by the practice of sequence generation problems, such as machine translation, where we often deal with a large action space (e.g., a vocabulary) and a long action sequence (e.g., a translation). In this work, we introduce two-stage sampling and dynamic sampling approaches to improve the sampling efficiency during training sequence generation models via RL. We experiment with our approaches on the traditional sequence generation tasks, including machine translation and abstractive summarization. Furthermore, we evaluate our approaches in RL from human feedback (RLHF) through training a large language model using the reward model. Experimental results show that the efficient sampling-based RL, referred to as ESRL, can outperform all baselines in terms of both training efficiency and memory consumption. Notably, ESRL yields consistent performance gains over the strong REINFORCE, minimum risk training, and proximal policy optimization methods.

Test-Time Scaling (TTS) improves the reasoning performance of Large Language Models (LLMs) by allocating additional compute during inference. We conduct a structured survey of TTS methods and categorize them into sampling-based, search-based, and trajectory optimization strategies. We observe that reasoning-optimized models often produce less diverse outputs, which limits TTS effectiveness. To address this, we propose ADAPT (A Diversity Aware Prefix fine-Tuning), a lightweight method that applies prefix tuning with a diversity-focused data strategy. Experiments on mathematical reasoning tasks show that ADAPT reaches 80% accuracy using eight times less compute than strong baselines. Our findings highlight the essential role of generative diversity in maximizing TTS effectiveness.

Code efficiency is a fundamental aspect of software quality, yet how to harness large language models (LLMs) to optimize programs remains challenging. Prior approaches have sought for one-shot rewriting, retrieved exemplars, or prompt-based search, but they do not explicitly distill reusable optimization knowledge, which limits generalization beyond individual instances. In this paper, we present EffiSkill, a framework for code-efficiency optimization that builds a portable optimization toolbox for LLM-based agents. The key idea is to model recurring slow-to-fast transformations as reusable agent skills that capture both concrete transformation mechanisms and higher-level optimization strategies. EffiSkill adopts a two-stage design: Stage I mines Operator and Meta Skills from large-scale slow/fast program pairs to build a skill library; Stage II applies this library to unseen programs through execution-free diagnosis, skill retrieval, plan composition, and candidate generation, without runtime feedback. Results on EffiBench-X show that EffiSkill achieves higher optimization success rates, improving over the strongest baseline by 3.69 to 12.52 percentage points across model and language settings. These findings suggest that mechanism-level skill reuse provides a useful foundation for execution-free code optimization, and that the resulting skill library can serve as a reusable resource for broader agent workflows.

We study the potential of using large language models (LLMs) as an interactive optimizer for solving maximization problems in a text space using natural language and numerical feedback. Inspired by the classical optimization literature, we classify the natural language feedback into directional and non-directional, where the former is a generalization of the first-order feedback to the natural language space. We find that LLMs are especially capable of optimization when they are provided with {directional feedback}. Based on this insight, we design a new LLM-based optimizer that synthesizes directional feedback from the historical optimization trace to achieve reliable improvement over iterations. Empirically, we show our LLM-based optimizer is more stable and efficient in solving optimization problems, from maximizing mathematical functions to optimizing prompts for writing poems, compared with existing techniques.

We introduce Reprompting, an iterative sampling algorithm that searches for the Chain-of-Thought (CoT) recipes for a given task without human intervention. Through Gibbs sampling, we infer CoT recipes that work consistently well for a set of training samples. Our method iteratively samples new recipes using previously sampled solutions as parent prompts to solve other training problems. On five Big-Bench Hard tasks that require multi-step reasoning, Reprompting achieves consistently better performance than the zero-shot, few-shot, and human-written CoT baselines. Reprompting can also facilitate transfer of knowledge from a stronger model to a weaker model leading to substantially improved performance of the weaker model. Overall, Reprompting brings up to +17 point improvements over the previous state-of-the-art method that uses human-written CoT prompts.

Code generation with large language models has shown significant promise, especially when employing retrieval-augmented generation (RAG) with few-shot examples. However, selecting effective examples that enhance generation quality remains a challenging task, particularly when the target programming language (PL) is underrepresented. In this study, we present two key findings: (1) retrieving examples whose presented algorithmic plans can be referenced for generating the desired behavior significantly improves generation accuracy, and (2) converting code into pseudocode effectively captures such algorithmic plans, enhancing retrieval quality even when the source and the target PLs are different. Based on these findings, we propose Plan-as-query Example Retrieval for few-shot prompting in Code generation (PERC), a novel framework that utilizes algorithmic plans to identify and retrieve effective examples. We validate the effectiveness of PERC through extensive experiments on the CodeContests, HumanEval and MultiPL-E benchmarks: PERC consistently outperforms the state-of-the-art RAG methods in code generation, both when the source and target programming languages match or differ, highlighting its adaptability and robustness in diverse coding environments.

Large Language Models (LLMs) have achieved great success in many real-world applications, especially the one serving as the cognitive backbone of Multi-Agent Systems (MAS) to orchestrate complex workflows in practice. Since many deployment scenarios preclude MAS workflow modifications and its performance is highly sensitive to the input prompts, prompt optimization emerges as a more natural approach to improve its performance. However, real-world prompt optimization for MAS is impeded by three key challenges: (1) the need of sample efficiency due to prohibitive evaluation costs, (2) topology-induced coupling among prompts, and (3) the combinatorial explosion of the search space. To address these challenges, we introduce MASPOB (Multi-Agent System Prompt Optimization via Bandits), a novel sample-efficient framework based on bandits. By leveraging Upper Confidence Bound (UCB) to quantify uncertainty, the bandit framework balances exploration and exploitation, maximizing gains within a strictly limited budget. To handle topology-induced coupling, MASPOB integrates Graph Neural Networks (GNNs) to capture structural priors, learning topology-aware representations of prompt semantics. Furthermore, it employs coordinate ascent to decompose the optimization into univariate sub-problems, reducing search complexity from exponential to linear. Extensive experiments across diverse benchmarks demonstrate that MASPOB achieves state-of-the-art performance, consistently outperforming existing baselines.

The increasing complexity of machine learning models and the proliferation of diverse hardware architectures (CPUs, GPUs, accelerators) make achieving optimal performance a significant challenge. Heterogeneity in instruction sets, specialized kernel requirements for different data types and model features (e.g., sparsity, quantization), and architecture-specific optimizations complicate performance tuning. Manual optimization is resource-intensive, while existing automatic approaches often rely on complex hardware-specific heuristics and uninterpretable intermediate representations, hindering performance portability. We introduce PerfLLM, a novel automatic optimization methodology leveraging Large Language Models (LLMs) and Reinforcement Learning (RL). Central to this is PerfDojo, an environment framing optimization as an RL game using a human-readable, mathematically-inspired code representation that guarantees semantic validity through transformations. This allows effective optimization without prior hardware knowledge, facilitating both human analysis and RL agent training. We demonstrate PerfLLM's ability to achieve significant performance gains across diverse CPU (x86, Arm, RISC-V) and GPU architectures.

Speculative sampling (SpS) has been successful in accelerating the decoding throughput of auto-regressive large language models by leveraging smaller draft models. SpS strictly enforces the generated distribution to match that of the verifier LLM. This is unnecessarily restrictive as slight variations of the verifier's distribution, such as sampling with top-k or temperature, would also be acceptable. Typical acceptance sampling (TAS) alleviates this issue by accepting more tokens using entropy-based heuristics. However, this approach distorts the verifier distribution, potentially degrading output quality when the verifier encodes critical information. In this work, we formalize the speculative sampling algorithm through the lens of constrained optimization. Based on this formulation, we propose Cactus (constrained acceptance speculative sampling), a method that guarantees controlled divergence from the verifier distribution and increasing acceptance rates. Empirical results across a wide range of benchmarks confirm the effectiveness of our approach.

LLMs have demonstrated commendable performance across diverse domains. Nevertheless, formulating high-quality prompts to instruct LLMs proficiently poses a challenge for non-AI experts. Existing research in prompt engineering suggests somewhat scattered optimization principles and designs empirically dependent prompt optimizers. Unfortunately, these endeavors lack a structured design template, incurring high learning costs and resulting in low reusability. In addition, it is not conducive to the iterative updating of prompts. Inspired by structured reusable programming languages, we propose LangGPT, a dual-layer prompt design framework as the programming language for LLMs. LangGPT has an easy-to-learn normative structure and provides an extended structure for migration and reuse. Experiments illustrate that LangGPT significantly enhances the performance of LLMs. Moreover, the case study shows that LangGPT leads LLMs to generate higher-quality responses. Furthermore, we analyzed the ease of use and reusability of LangGPT through a user survey in our online community.

This paper studies close-loop task planning, which refers to the process of generating a sequence of skills (a plan) to accomplish a specific goal while adapting the plan based on real-time observations. Recently, prompting Large Language Models (LLMs) to generate actions iteratively has become a prevalent paradigm due to its superior performance and user-friendliness. However, this paradigm is plagued by two inefficiencies: high token consumption and redundant error correction, both of which hinder its scalability for large-scale testing and applications. To address these issues, we propose Tree-Planner, which reframes task planning with LLMs into three distinct phases: plan sampling, action tree construction, and grounded deciding. Tree-Planner starts by using an LLM to sample a set of potential plans before execution, followed by the aggregation of them to form an action tree. Finally, the LLM performs a top-down decision-making process on the tree, taking into account real-time environmental information. Experiments show that Tree-Planner achieves state-of-the-art performance while maintaining high efficiency. By decomposing LLM queries into a single plan-sampling call and multiple grounded-deciding calls, a considerable part of the prompt are less likely to be repeatedly consumed. As a result, token consumption is reduced by 92.2% compared to the previously best-performing model. Additionally, by enabling backtracking on the action tree as needed, the correction process becomes more flexible, leading to a 40.5% decrease in error corrections. Project page: https://tree-planner.github.io/

Among the most important properties of algorithms investigated in computer science are soundness, completeness, and complexity. These properties, however, are rarely analyzed for the vast collection of recently proposed methods for planning with large language models. In this work, we alleviate this gap. We analyse these properties of using LLMs for planning and highlight that recent trends abandon both soundness and completeness for the sake of inefficiency. We propose a significantly more efficient approach that can, at the same time, maintain both soundness and completeness. We exemplify on four representative search problems, comparing to the LLM-based solutions from the literature that attempt to solve these problems. We show that by using LLMs to produce the code for the search components we can solve the entire datasets with 100\% accuracy with only a few calls to the LLM. We argue for a responsible use of compute resources; urging research community to investigate sound and complete LLM-based approaches that uphold efficiency.

Instruction-based language modeling has received significant attention in pretrained language models. However, the efficiency of instruction engineering remains low and hinders the development of instruction studies. Recent studies have focused on automating instruction generation, but they primarily aim to improve performance without considering other crucial objectives that impact instruction quality, such as instruction length and perplexity. Therefore, we propose a novel approach (i.e., InstOptima) that treats instruction generation as an evolutionary multi-objective optimization problem. In contrast to text edition-based methods, our approach utilizes a large language model (LLM) to simulate instruction operators, including mutation and crossover. Furthermore, we introduce an objective-guided mechanism for these operators, allowing the LLM to comprehend the objectives and enhance the quality of the generated instructions. Experimental results demonstrate improved fine-tuning performance and the generation of a diverse set of high-quality instructions.

We introduce a novel framework that transforms the resource-intensive (adversarial) prompt optimization problem into an efficient, amortized inference task. Our core insight is that pretrained, non-autoregressive generative LLMs, such as Diffusion LLMs, which model the joint distribution over prompt-response pairs, can serve as powerful surrogates for prompt search. This approach enables the direct conditional generation of prompts, effectively replacing costly, per-instance discrete optimization with a small number of parallelizable samples. We provide a probabilistic analysis demonstrating that under mild fidelity assumptions, only a few conditional samples are required to recover high-reward (harmful) prompts. Empirically, we find that the generated prompts are low-perplexity, diverse jailbreaks that exhibit strong transferability to a wide range of black-box target models, including robustly trained and proprietary LLMs. Beyond adversarial prompting, our framework opens new directions for red teaming, automated prompt optimization, and leveraging emerging Flow- and Diffusion-based LLMs.

We present a novel approach for generating minority samples that live on low-density regions of a data manifold. Our framework is built upon diffusion models, leveraging the principle of guided sampling that incorporates an arbitrary energy-based guidance during inference time. The key defining feature of our sampler lies in its self-contained nature, \ie, implementable solely with a pretrained model. This distinguishes our sampler from existing techniques that require expensive additional components (like external classifiers) for minority generation. Specifically, we first estimate the likelihood of features within an intermediate latent sample by evaluating a reconstruction loss w.r.t. its posterior mean. The generation then proceeds with the minimization of the estimated likelihood, thereby encouraging the emergence of minority features in the latent samples of subsequent timesteps. To further improve the performance of our sampler, we provide several time-scheduling techniques that properly manage the influence of guidance over inference steps. Experiments on benchmark real datasets demonstrate that our approach can greatly improve the capability of creating realistic low-likelihood minority instances over the existing techniques without the reliance on costly additional elements. Code is available at https://github.com/soobin-um/sg-minority.

Large language models increasingly tackle hard reasoning problems by spending more test-time compute, yet the dominant strategy remains naive repeated sampling: draw many independent solutions and hope one is correct. Because such sampling explores only through local decoding noise, it tends to produce many near duplicate attempts rather than genuinely different ideas. We ask whether exploration can instead be steered at a semantic level, by first sampling problem specific concepts, hints, or strategies and then conditioning answer generation on them. We refine this into a simple, more exploratory procedure that emits many diverse concepts in a single trajectory, and evaluate it on hard problems where repeated sampling struggles. We then go a step further and make concept generation trainable: a small concept generator is optimized with reinforcement learning so that its concepts maximize the downstream success of a larger, frozen answer generator. On hard mathematical reasoning problems, the trained concept generator substantially improves the answer generator's pass@k over naive repeated sampling at the same answer generation allocation, surpasses concepts drawn from much larger untuned models, and transfers to answer generators it was never trained against, including a model from a different family. A small model can thus be trained into an effective, reusable search policy for a much larger one.

Prompt-based learning has been an effective paradigm for large pretrained language models (LLM), enabling few-shot or even zero-shot learning. Black-box prompt search has received growing interest recently for its distinctive properties of gradient-free optimization, proven particularly useful and powerful for model-as-a-service usage. However, the discrete nature and the complexity of combinatorial optimization hinder the efficiency of modern black-box approaches. Despite extensive research on search algorithms, the crucial aspect of search space design and optimization has been largely overlooked. In this paper, we first conduct a sensitivity analysis by prompting LLM, revealing that only a small number of tokens exert a disproportionate amount of influence on LLM predictions. Leveraging this insight, we propose the Clustering and Pruning for Efficient Black-box Prompt Search (ClaPS), a simple black-box search method that first clusters and prunes the search space to focus exclusively on influential prompt tokens. By employing even simple search methods within the pruned search space, ClaPS achieves state-of-the-art performance across various tasks and LLMs, surpassing the performance of complex approaches while significantly reducing search costs. Our findings underscore the critical role of search space design and optimization in enhancing both the usefulness and the efficiency of black-box prompt-based learning.

Prompt optimization offers a practical and broadly applicable alternative to fine-tuning for improving large language model (LLM) performance. However, existing methods often rely on costly output generation, self-critiquing abilities, or human-annotated preferences, which limit their scalability, especially for smaller or non-instruction-tuned models. We introduce PMPO (Probabilistic Metric Prompt Optimization), a unified framework that refines prompts using token-level cross-entropy loss as a direct, lightweight evaluation signal. PMPO identifies low-quality prompt segments by masking and measuring their impact on loss, then rewrites and selects improved variants by minimizing loss over positive and negative examples. Unlike prior methods, it requires no output sampling or human evaluation during optimization, relying only on forward passes and log-likelihoods. PMPO supports both supervised and preference-based tasks through a closely aligned loss-based evaluation strategy. Experiments show that PMPO consistently outperforms prior methods across model sizes and tasks: it achieves the highest average accuracy on BBH, performs strongly on GSM8K and AQUA-RAT, and improves AlpacaEval 2.0 win rates by over 19 points. These results highlight PMPO's effectiveness, efficiency, and broad applicability.

Global optimization of expensive, derivative-free black-box functions demands extreme sample efficiency and decision interpretability. While Large Language Models (LLMs) have shown broad capabilities, even state-of-the-art models remain limited in solving continuous black-box optimization tasks and struggle to maintain exploration-exploitation balance. We introduce GPTOpt, an optimization method that equips LLMs with continuous black-box optimization capabilities by fine-tuning Llama 3.1 8B on structured Bayesian optimization (BO) data, including surrogate model information. This provides an explainable framework calibrated to produce surrogate model outputs comparable to a Gaussian process, while keeping the advantages of flexible LLM-based optimization. On a variety of black-box optimization benchmarks, our model shows favorable performance compared to traditional optimizers and transformer-based alternatives, while providing important context and insight into the model's decisions.

We introduce FindStatBench, an execution benchmark for evaluating large language models on combinatorial code synthesis. Built from FindStat, it contains 2,329 tasks across 24 collections and 5.52M hidden instances, covering statistic synthesis, which maps objects to integers, and map synthesis, which maps objects to objects. Each task gives a mathematical description and at most five public input-output examples; a model must emit one Python solve function with no retrieval, tool use, execution feedback, voting, or reranking. Submissions are scored by exact sandboxed execution on held-out combinatorial objects. We evaluate eleven systems: four closed-source production models and seven open-weight models served through one inference provider. FindStatBench reveals three main patterns. First, the strongest open- and closed-source systems converge within 1 pp instance accuracy, and both an oracle over all systems and five-way sampling from one mid-tier model yield only limited task-accuracy gains. Second, examples can hurt: several classical bijections are solved perfectly with zero examples but fail under five-example prompts. Third, some failures reflect output-budget mechanics, as reasoning can exhaust the visible response before code is emitted. Overall, statistic synthesis is much easier than map synthesis, some collections remain near-zero, long prompts cause a sharp accuracy cliff, and exact symbolic rule induction remains brittle.

Large Language Models (LLMs) can perform various natural language processing tasks with suitable instruction prompts. However, designing effective prompts manually is challenging and time-consuming. Existing methods for automatic prompt optimization either lack flexibility or efficiency. In this paper, we propose an effective approach to automatically select the optimal prompt for a given input from a finite set of synthetic candidate prompts. Our approach consists of three steps: (1) clustering the training data and generating candidate prompts for each cluster using an LLM-based prompt generator; (2) synthesizing a dataset of input-prompt-output tuples for training a prompt evaluator to rank the prompts based on their relevance to the input; (3) using the prompt evaluator to select the best prompt for a new input at test time. Our approach balances prompt generality-specificity and eliminates the need for resource-intensive training and inference. It demonstrates competitive performance on zero-shot question-answering datasets: GSM8K, MultiArith, and AQuA.

Despite the rapid development of large language models (LLMs), a fundamental challenge persists: the lack of high-quality optimization modeling datasets hampers LLMs' robust modeling of practical optimization problems from natural language descriptions (NL). This data scarcity also contributes to the generalization difficulties experienced by learning-based methods. To address these challenges, we propose a scalable framework for synthesizing a high-quality dataset, named OptMATH. Starting from curated seed data with mathematical formulations (MF), this framework automatically generates problem data (PD) with controllable complexity. Then, a back-translation step is employed to obtain NL. To verify the correspondence between the NL and the PD, a forward modeling step followed by rejection sampling is used. The accepted pairs constitute the training part of OptMATH. Then a collection of rejected pairs is identified and further filtered. This collection serves as a new benchmark for optimization modeling, containing difficult instances whose lengths are much longer than these of NL4OPT and MAMO. Through extensive experiments, we demonstrate that models of various sizes (0.5B-32B parameters) trained on OptMATH achieve superior results on multiple modeling benchmarks, thereby validating the effectiveness and scalability of our approach. Our dataset is publicly available at https://github.com/AuroraLHL/OptMATH.

Tool-calling is a central component of modern large language model (LLM) agents, equipping them with skills beyond their parametric knowledge. This paper studies tool-calling along two complementary axes: effectiveness, i.e., how this capability is measured, and efficiency, i.e., how it is learned. On effectiveness, we systematically analyze tool-calling evaluation pipelines and show that results can be highly sensitive to seemingly minor, often undocumented implementation choices including the random seed, system prompt, multi-turn template construction, and how prior interaction/reasoning history is carried forward. These choices can lead to substantial differences in reported performance, especially in multi-turn settings where without rigorous standardization, leaderboard rankings are unreliable. On efficiency, we examine standard reinforcement learning (RL) for tool-calling and identify two sources of computational waste: (i) during rollouts, many prompts produce no learning signal, and (ii) during policy updates, optimization incurs high computational cost. Guided by these findings, we introduce two techniques that accelerate RL-based tool-calling training, achieving substantial wall-clock speedup without degrading performance.

In recent years, large language models (LLMs) have shown remarkable capabilities in various artificial intelligence problems. However, they fail to plan reliably, even when prompted with a detailed definition of the planning task. Attempts to improve their planning capabilities, such as chain-of-thought prompting, fine-tuning, and explicit "reasoning" still yield incorrect plans and usually fail to generalize to larger tasks. In this paper, we show how to use LLMs to generate correct plans, even for out-of-distribution tasks of increasing size. For a given planning domain, we ask an LLM to generate several domain-dependent heuristic functions in the form of Python code, evaluate them on a set of training tasks within a greedy best-first search, and choose the strongest one. The resulting LLM-generated heuristics solve many more unseen test tasks than state-of-the-art domain-independent heuristics for classical planning. They are even competitive with the strongest learning algorithm for domain-dependent planning. These findings are especially remarkable given that our proof-of-concept implementation is based on an unoptimized Python planner and the baselines all build upon highly optimized C++ code. In some domains, the LLM-generated heuristics expand fewer states than the baselines, revealing that they are not only efficiently computable, but sometimes even more informative than the state-of-the-art heuristics. Overall, our results show that sampling a set of planning heuristic function programs can significantly improve the planning capabilities of LLMs.

Finetuning large language models on instruction data is crucial for enhancing pre-trained knowledge and improving instruction-following capabilities. As instruction datasets proliferate, selecting optimal data for effective training becomes increasingly important. This work addresses the question: How can we determine the optimal subset of data for effective training? While existing research often emphasizes local criteria like instance quality for subset selection, we argue that a global approach focused on data diversity is more critical. Our method employs k-means clustering to ensure the selected subset effectively represents the full dataset. We propose an iterative refinement method inspired by active learning techniques to resample instances from clusters, reassessing each cluster's importance and sampling weight in every training iteration. This approach reduces the effect of outliers and automatically filters out clusters containing low-quality data. Through extensive evaluation across natural language reasoning, general world knowledge, code and math reasoning tasks, and by fine-tuning models from various families, we observe consistent improvements, achieving a 7% increase over random selection and a 3.8% improvement over state-of-the-art sampling methods. Our work highlights the significance of diversity-first sampling when finetuning LLMs to enhance performance across a broad array of evaluation tasks. Our code is available at https://github.com/for-ai/iterative-data-selection.

Batch Bayesian optimisation (BO) is a successful technique for the optimisation of expensive black-box functions. Asynchronous BO can reduce wallclock time by starting a new evaluation as soon as another finishes, thus maximising resource utilisation. To maximise resource allocation, we develop a novel asynchronous BO method, AEGiS (Asynchronous epsilon-Greedy Global Search) that combines greedy search, exploiting the surrogate's mean prediction, with Thompson sampling and random selection from the approximate Pareto set describing the trade-off between exploitation (surrogate mean prediction) and exploration (surrogate posterior variance). We demonstrate empirically the efficacy of AEGiS on synthetic benchmark problems, meta-surrogate hyperparameter tuning problems and real-world problems, showing that AEGiS generally outperforms existing methods for asynchronous BO. When a single worker is available performance is no worse than BO using expected improvement.

The integration of Reinforcement Learning (RL) into flow matching models for text-to-image (T2I) generation has driven substantial advances in generation quality. However, these gains often come at the cost of exhaustive exploration and inefficient sampling strategies due to slight variation in the sampling group. Building on this insight, we propose Dynamic-TreeRPO, which implements the sliding-window sampling strategy as a tree-structured search with dynamic noise intensities along depth. We perform GRPO-guided optimization and constrained Stochastic Differential Equation (SDE) sampling within this tree structure. By sharing prefix paths of the tree, our design effectively amortizes the computational overhead of trajectory search. With well-designed noise intensities for each tree layer, Dynamic-TreeRPO can enhance the variation of exploration without any extra computational cost. Furthermore, we seamlessly integrate Supervised Fine-Tuning (SFT) and RL paradigm within Dynamic-TreeRPO to construct our proposed LayerTuning-RL, reformulating the loss function of SFT as a dynamically weighted Progress Reward Model (PRM) rather than a separate pretraining method. By associating this weighted PRM with dynamic-adaptive clipping bounds, the disruption of exploration process in Dynamic-TreeRPO is avoided. Benefiting from the tree-structured sampling and the LayerTuning-RL paradigm, our model dynamically explores a diverse search space along effective directions. Compared to existing baselines, our approach demonstrates significant superiority in terms of semantic consistency, visual fidelity, and human preference alignment on established benchmarks, including HPS-v2.1, PickScore, and ImageReward. In particular, our model outperforms SoTA by 4.9%, 5.91%, and 8.66% on those benchmarks, respectively, while improving the training efficiency by nearly 50%.

Large language models (LLMs) have exhibited their problem-solving abilities in mathematical reasoning. Solving realistic optimization (OPT) problems in application scenarios requires advanced and applied mathematics ability. However, current OPT benchmarks that merely solve linear programming are far from complex realistic situations. In this work, we propose OptiBench, a benchmark for End-to-end optimization problem-solving with human-readable inputs and outputs. OptiBench contains rich optimization problems, including linear and nonlinear programming with or without tabular data, which can comprehensively evaluate LLMs' solving ability. In our benchmark, LLMs are required to call a code solver to provide precise numerical answers. Furthermore, to alleviate the data scarcity for optimization problems, and to bridge the gap between open-source LLMs on a small scale (e.g., Llama-3-8b) and closed-source LLMs (e.g., GPT-4), we further propose a data synthesis method namely ReSocratic. Unlike general data synthesis methods that proceed from questions to answers, \ReSocratic first incrementally synthesizes formatted optimization demonstration with mathematical formulations step by step and then back-translates the generated demonstrations into questions. Based on this, we synthesize the ReSocratic-29k dataset. We further conduct supervised fine-tuning with ReSocratic-29k on multiple open-source models. Experimental results show that ReSocratic-29k significantly improves the performance of open-source models.

Large Language Model (LLM) agents are increasingly deployed in environments that generate massive, dynamic contexts. However, a critical bottleneck remains: while agents have access to this context, their static prompts lack the mechanisms to manage it effectively, leading to recurring Corrective and Enhancement failures. To address this capability gap, we introduce SCOPE (Self-evolving Context Optimization via Prompt Evolution). SCOPE frames context management as an online optimization problem, synthesizing guidelines from execution traces to automatically evolve the agent's prompt. We propose a Dual-Stream mechanism that balances tactical specificity (resolving immediate errors) with strategic generality (evolving long-term principles). Furthermore, we introduce Perspective-Driven Exploration to maximize strategy coverage, increasing the likelihood that the agent has the correct strategy for any given task. Experiments on the HLE benchmark show that SCOPE improves task success rates from 14.23\% to 38.64\% without human intervention. We make our code publicly available at https://github.com/JarvisPei/SCOPE.

Model-based reinforcement learning methods often use learning only for the purpose of estimating an approximate dynamics model, offloading the rest of the decision-making work to classical trajectory optimizers. While conceptually simple, this combination has a number of empirical shortcomings, suggesting that learned models may not be well-suited to standard trajectory optimization. In this paper, we consider what it would look like to fold as much of the trajectory optimization pipeline as possible into the modeling problem, such that sampling from the model and planning with it become nearly identical. The core of our technical approach lies in a diffusion probabilistic model that plans by iteratively denoising trajectories. We show how classifier-guided sampling and image inpainting can be reinterpreted as coherent planning strategies, explore the unusual and useful properties of diffusion-based planning methods, and demonstrate the effectiveness of our framework in control settings that emphasize long-horizon decision-making and test-time flexibility.