Daily Papers

Many log-analysis tasks involve choosing among known options, such as detecting anomalous sessions or identifying attack techniques, and benefit from calibrated probabilities. We present Lev-3B, an open 3B-parameter decision model built on Granite-4.1-3B-Base with a shared pointer readout, and study its training recipe. The recipe has two key parts. First, training follows a curriculum: the model learns bounded natural-language decisions, using no log data, before it sees any logs. Second, the log stage mixes the target tasks with general log data spanning 35 auxiliary tasks unrelated to either evaluation task. We evaluate one shared checkpoint on sources seen in training and on sources excluded from training, calibration and model selection. The two-stage recipe transfers substantially better than training on log data alone. Adding general log data improves performance on excluded sources. At a fraction of their serving cost, Lev-3B outperforms prompted frontier models on anomaly detection, including on an excluded logging system, but trails them on attack-technique classification. Its probabilities are well calibrated on familiar sources, but on the excluded logging system it confidently misses anomalies. We release the checkpoint, recipe, data manifests, and prediction-level artifacts.

This paper provides a novel approach to reconciling complex low-level memory model features, such as pointer--integer casts, with desired refinements that are needed to justify the correctness of program transformations. The idea is to use a "two-phased" memory model, one with and unbounded memory and corresponding unbounded integer type, and one with a finite memory; the connection between the two levels is made explicit by our notion of refinement that handles out-of-memory behaviors. This approach allows for more optimizations to be performed and establishes a clear boundary between the idealized semantics of a program and the implementation of that program on finite hardware. To demonstrate the utility of this idea in practice, we instantiate the two-phase memory model in the context of Zakowski et al.'s VIR semantics, yielding infinite and finite memory models of LLVM IR, including low-level features like undef and bitcast. Both the infinite and finite models, which act as specifications, can provably be refined to executable reference interpreters. The semantics justify optimizations, such as dead-alloca-elimination, that were previously impossible or difficult to prove correct.

This paper presents a program logic for reasoning about multithreaded Java-like programs with dynamic thread creation, thread joining and reentrant object monitors. The logic is based on concurrent separation logic. It is the first detailed adaptation of concurrent separation logic to a multithreaded Java-like language. The program logic associates a unique static access permission with each heap location, ensuring exclusive write accesses and ruling out data races. Concurrent reads are supported through fractional permissions. Permissions can be transferred between threads upon thread starting, thread joining, initial monitor entrancies and final monitor exits. In order to distinguish between initial monitor entrancies and monitor reentrancies, auxiliary variables keep track of multisets of currently held monitors. Data abstraction and behavioral subtyping are facilitated through abstract predicates, which are also used to represent monitor invariants, preconditions for thread starting and postconditions for thread joining. Value-parametrized types allow to conveniently capture common strong global invariants, like static object ownership relations. The program logic is presented for a model language with Java-like classes and interfaces, the soundness of the program logic is proven, and a number of illustrative examples are presented.

Many LLM tasks are performed in large batches or even offline, and the performance indictor for which is throughput. These tasks usually show the characteristic of prefix sharing, where different prompt input can partially show the common prefix. However, the existing LLM inference engines tend to optimize the streaming requests and show limitations of supporting the large batched tasks with the prefix sharing characteristic. The existing solutions use the LRU-based cache to reuse the KV context of common prefix. The KV context that is about to be reused may prematurely be evicted with the implicit cache management. Even if not evicted, the lifetime of the shared KV context is extended since requests sharing the same context are not scheduled together, resulting in larger memory usage. These streaming oriented systems schedule the requests in the first-come-first-serve or similar order. As a result, the requests with larger ratio of decoding steps may be scheduled too late to be able to mix with the prefill chunks to increase the hardware utilization. Besides, the token and request number based batching can limit the size of token-batch, which keeps the GPU from saturating for the iterations dominated by decoding tokens. We propose BatchLLM to address the above problems. BatchLLM explicitly identifies the common prefixes globally. The requests sharing the same prefix will be scheduled together to reuse the KV context the best, which also shrinks the lifetime of common KV memory. BatchLLM reorders the requests and schedules the requests with larger ratio of decoding first to better mix the decoding tokens with the latter prefill chunks and applies memory-centric token batching to enlarge the token-batch sizes, which helps to increase the GPU utilization. Extensive evaluation shows that BatchLLM outperforms vLLM by 1.1x to 2x on a set of microbenchmarks and two typical industry workloads.

Programmable switches are driving a massive increase in fine-grained measurements. This puts significant pressure on telemetry collectors that have to process reports from many switches. Past research acknowledged this problem by either improving collectors' stack performance or by limiting the amount of data sent from switches. In this paper, we take a different and radical approach: switches are responsible for directly inserting queryable telemetry data into the collectors' memory, bypassing their CPU, and thereby improving their collection scalability. We propose to use a method we call direct telemetry access, where switches jointly write telemetry reports directly into the same collector's memory region, without coordination. Our solution, DART, is probabilistic, trading memory redundancy and query success probability for CPU resources at collectors. We prototype DART using commodity hardware such as P4 switches and RDMA NICs and show that we get high query success rates with a reasonable memory overhead. For example, we can collect INT path tracing information on a fat tree topology without a collector's CPU involvement while achieving 99.9\% query success probability and using just 300 bytes per flow.

The popularity of the Rust language continues to explode; yet, many critical codebases remain authored in C, and cannot be realistically rewritten by hand. Automatically translating C to Rust is thus an appealing course of action. Several works have gone down this path, handling an ever-increasing subset of C through a variety of Rust features, such as unsafe. While the prospect of automation is appealing, producing code that relies on unsafe negates the memory safety guarantees offered by Rust, and therefore the main advantages of porting existing codebases to memory-safe languages. We instead explore a different path, and explore what it would take to translate C to safe Rust; that is, to produce code that is trivially memory safe, because it abides by Rust's type system without caveats. Our work sports several original contributions: a type-directed translation from (a subset of) C to safe Rust; a novel static analysis based on "split trees" that allows expressing C's pointer arithmetic using Rust's slices and splitting operations; an analysis that infers exactly which borrows need to be mutable; and a compilation strategy for C's struct types that is compatible with Rust's distinction between non-owned and owned allocations. We apply our methodology to existing formally verified C codebases: the HACL* cryptographic library, and binary parsers and serializers from EverParse, and show that the subset of C we support is sufficient to translate both applications to safe Rust. Our evaluation shows that for the few places that do violate Rust's aliasing discipline, automated, surgical rewrites suffice; and that the few strategic copies we insert have a negligible performance impact. Of particular note, the application of our approach to HACL* results in a 80,000 line verified cryptographic library, written in pure Rust, that implements all modern algorithms - the first of its kind.

Future collider experiments require unprecedented precision in measurements of Higgs, electroweak, and flavour observables, placing stringent demands on event reconstruction. The achievable precision on Higgs couplings scales directly with the resolution on visible final state particles and their invariant masses. Current particle flow algorithms rely on detector specific clustering, limiting flexibility during detector design. Here we present an end-to-end global event reconstruction approach that maps charged particle tracks and calorimeter and muon hits directly to particle level objects. The method combines geometric algebra transformer networks with object condensation based clustering, followed by dedicated networks for particle identification and energy regression. Our approach is benchmarked on fully simulated electron positron collisions at FCC-ee using the CLD detector concept. It outperforms the state-of-the-art rule-based algorithm by 10--20\% in relative reconstruction efficiency, achieves up to two orders of magnitude reduction in fake-particle rates for charged hadrons, and improves visible energy and invariant mass resolution by 22\%. By decoupling reconstruction performance from detector-specific tuning, this framework enables rapid iteration during the detector design phase of future collider experiments.

Language models hold latent quantities in a form they can report on, and more of a quantity is present in that form when the task requires reusing it flexibly. What causes a representation to enter that form is open, and the word workspace invites an admission story: a gate that decides what gets in. Testing it on open-weight models with Jacobian lenses, over a benchmark whose five arms share an identical context, we find no gate where it predicts one. Demand raises a concept's lens visibility beyond what applying an operator to a supplied value produces: +0.050 [+0.045, +0.057] in percentile rank on our primary checkpoint, positive on all four we measure, though that arm answers at ceiling and the accuracymatched contrast is stronger under that readout. At the same time one shared linear map decodes the variable from every arm, the control included, at 6.4-9.0x its selection-corrected floor. What produces the later readable form at the queried position is attention-mediated gathering inside a mid-depth window: separating patch depth from readout depth puts transport there at least 17x above anywhere shallower under non-saturating readouts, with no tested MLP output contributing positively inside it. Under the saturating percentile rank the same grid does not localise the window, which is a fact about that measure. An arm that needs the variable for nothing concentrates sevenfold less, so the window is demand-specific. That window has two measured edges, a survival failure below and destruction above, and it falls at the same fractional depth in a 64-layer hybrid and a 62-layer dense model from another family. We localise where the variable is installed and read, not the route from the passage, which transports nothing. But the readout is not a calibrated measure of use: three components move it to within 12% of one another and differ 7.4x in what they do to the answer.

Fault-tolerant quantum computing (FTQC) introduces substantial systems-level complexity through quantum error correction (QEC), making debugging FTQC programs challenging. Existing quantum debugging approaches primarily target logical-level circuits and do not naturally support debugging within realistic FTQC execution flows. We present SynDebug, the first systems-level debugging framework for FTQC programs. SynDebug introduces lightweight assertion-based debugging primitives that operate directly within encoded FTQC infrastructures while avoiding additional logical surface area and minimizing temporal overhead. We evaluate SynDebug across multiple QEC code families, code distances, and encoded workloads, including state preparation, entanglement validation, and Shor-style programs. Our results demonstrate that SynDebug enables practical FTQC debugging with an average 1.8% additional circuit depth overhead (0% in most cases) and no measurable increase in the logical error rate, showing that systems-level debugging for large-scale FTQC applications is both feasible and practical.

Large language models are trained with backpropagation, whose global gradient coordinates all layers but forces each to hold its activations and wait for the gradient to pass back through every deeper layer. Conventional local learning removes this update locking by training each module to predict the target through its own readout, but has not scaled to billion-parameter pretraining. We identify these private readouts as a key weakness, since they leave each module without information from deeper modules. We propose Shared-Output LOcal learning (SOLO), which replaces them with a shared, read-only copy of the final module's readout, the only one trained on the output of the whole network. Taken from the previous step, the copy transmits information from the final module without passing gradients between modules or reintroducing update locking. SOLO approaches backpropagation on Transformers of 340M to 2B parameters pretrained on 15B tokens, staying within one point in average zero-shot accuracy with a perplexity gap that narrows with scale. Readout ablations attribute SOLO's improvement over private readouts to sharing. Without update locking, each of p pipeline stages holds activations for O(1) micro-batches instead of O(p). The freed memory permits larger micro-batches, which reach up to 1.44x the best measured throughput of pipeline backpropagation on the same partition. To our knowledge, SOLO is the first local learning method to show such memory and throughput gains in billion-parameter language-model pretraining. Local learning thus becomes a practical alternative to backpropagation for large-scale pretraining.

We implement and benchmark on IBM Quantum hardware the circuit family proposed by Violaris for estimating operational inter-branch communication witnesses, defined as correlations in classical measurement records produced by compiled Wigner's-friend-style circuits. We realize a five-qubit instance of the protocol as an inter-register message-transfer pattern within a single circuit, rather than physical signaling, and evaluate its behavior under realistic device noise and compilation constraints. The circuit encodes branch-conditioned evolution of an observer subsystem whose dynamics depend on a control qubit, followed by a controlled transfer operation that probes correlations between conditional measurement contexts. Executing on the ibm_fez backend with 20000 shots, we observe population-based visibility of 0.877, coherence witnesses of 0.840 and -0.811 along orthogonal axes, and a phase-sensitive magnitude of approximately 1.17. While the visibility metric is insensitive to some classes of dephasing, the coherence witnesses provide complementary sensitivity to off-diagonal noise. This work does not test or discriminate among interpretations of quantum mechanics. Instead, it provides a reproducible operational constraint pipeline for evaluating detectability of non-ideal channels relative to calibrated device noise.

This paper presents ``Stim", a fast simulator for quantum stabilizer circuits. The paper explains how Stim works and compares it to existing tools. With no foreknowledge, Stim can analyze a distance 100 surface code circuit (20 thousand qubits, 8 million gates, 1 million measurements) in 15 seconds and then begin sampling full circuit shots at a rate of 1 kHz. Stim uses a stabilizer tableau representation, similar to Aaronson and Gottesman's CHP simulator, but with three main improvements. First, Stim improves the asymptotic complexity of deterministic measurement from quadratic to linear by tracking the {\em inverse} of the circuit's stabilizer tableau. Second, Stim improves the constant factors of the algorithm by using a cache-friendly data layout and 256 bit wide SIMD instructions. Third, Stim only uses expensive stabilizer tableau simulation to create an initial reference sample. Further samples are collected in bulk by using that sample as a reference for batches of Pauli frames propagating through the circuit.

Foundation models are increasingly being pursued in particle and nuclear physics, but existing approaches remain strongly tied to individual experiments through detector-specific architectures or pre-training objectives, limiting their reuse across sensing modalities. We show that a point cloud self-distillation framework yields a substantially more general sensor-level pre-training recipe. We show that the same refined architecture and objective can be independently pre-trained with minimal changes on three qualitatively different detector modalities: liquid argon time projection chamber (LArTPC), collider TPC, and water Cherenkov. Using 1,000 labeled images for downstream task adaptation, Panda V2 matches or exceeds specialized foundation-model baselines trained with orders of magnitude more supervision, matching state-of-the-art particle-clustering performance with 70x fewer labeled events on sPHENIX while substantially improving particle identification, and on LArTPC data matching Panda (arXiv:2512.01324) particle reconstruction with up to 1,000x fewer labels. Beyond reconstruction, simple linear probes reveal physically meaningful latent structure associated with particle causality and track curvature.

Self-attention gives LLMs fine-grained, query-dependent access to context, but dense token interactions incur quadratic prefill cost and a key--value cache growing with context length. Research thus spans explicit-memory compression, sparse access, recurrent state construction, structured state dynamics, and heterogeneous mechanism composition. This survey analyzes these developments as model-internal contextual memory. We introduce a five-dimensional lens---Memory Representation, Memory Update, Access, Readout, and Integration---describing what is represented, how it changes, what is query-eligible, how it is read, and how readouts form outputs. This lens compares overlapping research lines without imposing one computational model. We reconstruct mechanism-level developments and architectural adoption using 59 release-level records from 14 major model lineages and 11 high-performing open-weight endpoints. First, explicit-memory and recurrent-state methods retain distinct interfaces but increasingly control overlapping memory functions. Second, heterogeneous architectures increasingly coordinate across network depth: layer-wise composition distributes complementary memory processing across representational stages, while cross-layer reuse carries selected memory and routing artifacts forward. Depth thus becomes a dimension along which contextual memory is constructed and managed. Third, these developments motivate a stateful multidimensional memory-routing hypothesis: persistent memory is organized across temporal scope, network depth, substrate type, and representation granularity, while coordinated Sparse Write and Sparse Read determine what is maintained and what contributes to each query. Overall, efficient sequence architecture design increasingly concerns the organization, lifecycle, and selective use of contextual memory rather than an isolated Attention operator.

Looped Transformers apply the same layers several times per token, adding compute to improve quality without more parameters. Each recursion, however, writes its own key-value cache, so memory still grows with compute. Inference-time techniques can shrink this cache at a cost in quality. We pretrain looped language models to share memory: only the first recursion writes a cache, and later recursions read it while keeping a short window of their own. Surprisingly, we find that sharing memory does not cost quality and instead improves it. At 150M-1B parameters, our Looped Prediction Transformer (LPT) and its hybrid variant set a new quality-memory frontier for looped models: with five recursions, the hybrid lowers validation perplexity on FineWeb-Edu by 1.12-1.82 relative to a same-size standard Transformer while using 76-79% less context memory. Through an extensive analysis, we investigate why memory sharing helps. Shared and local memory develop different representations, and later recursions attend mostly to the shared memory, which also acts as a gradient highway to the first recursion.

Long-context LLMs have enabled numerous downstream applications but also introduced significant challenges related to computational and memory efficiency. To address these challenges, optimizations for long-context inference have been developed, centered around the KV cache. However, existing benchmarks often evaluate in single-request, neglecting the full lifecycle of the KV cache in real-world use. This oversight is particularly critical, as KV cache reuse has become widely adopted in LLMs inference frameworks, such as vLLM and SGLang, as well as by LLM providers, including OpenAI, Microsoft, Google, and Anthropic. To address this gap, we introduce SCBench(SharedContextBench), a comprehensive benchmark for evaluating long-context methods from a KV cachecentric perspective: 1) KV cache generation, 2) KV cache compression, 3) KV cache retrieval, 4) KV cache loading. Specifically, SCBench uses test examples with shared context, ranging 12 tasks with two shared context modes, covering four categories of long-context capabilities: string retrieval, semantic retrieval, global information, and multi-task. With it, we provide an extensive KV cache-centric analysis of eight categories long-context solutions, including Gated Linear RNNs, Mamba-Attention hybrids, and efficient methods such as sparse attention, KV cache dropping, quantization, retrieval, loading, and prompt compression. The evaluation is conducted on 8 long-context LLMs. Our findings show that sub-O(n) memory methods suffer in multi-turn scenarios, while sparse encoding with O(n) memory and sub-O(n^2) pre-filling computation perform robustly. Dynamic sparsity yields more expressive KV caches than static patterns, and layer-level sparsity in hybrid architectures reduces memory usage with strong performance. Additionally, we identify attention distribution shift issues in long-generation scenarios. https://aka.ms/SCBench.

KV cache compression promises increased throughput and efficiency with negligible loss in performance. While the gains in throughput are indisputable and recent literature has indeed shown minimal degradation on particular benchmarks, in general the consequences of compression in realistic scenarios such as multi-instruction prompting have been insufficiently studied. In this paper, we identify several pitfalls practitioners should be aware of when deploying KV cache compressed LLMs. Importantly, we show that certain instructions degrade much more rapidly with compression, effectively causing them to be completely ignored by the LLM. As a practical example of that, we highlight system prompt leakage as a case study, empirically showing the impact of compression on leakage and general instruction following. We show several factors that play a role in prompt leakage: compression method, instruction order, and KV eviction bias. We then propose simple changes to KV cache eviction policies that can reduce the impact of these factors and improve the overall performance in multi-instruction tasks.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

Multi-agent LLM systems share state through memory stores, vector indices, and tool registries. We model such sharing as long-running read-generate-write operations under deterministic-generation semantics -- the regime durable-execution engines enforce by deterministic replay -- and formalize four concurrency anomalies in TLA+: stale-generation, phantom-tool, causal-cascade, and tool-effect reordering, structural analogues of classical isolation anomalies, each with a TLC counter-example. The exclusion lattice over these anomalies is trivial; the contribution is the mechanically verified realizability and strict separation of one maximal chain within it, L_0 subsetneq cdots subsetneq L_4, to our knowledge the first machine-checked consistency hierarchy for such runtimes. A development of 274 Verus obligations (zero assume, zero admit; trust base: two structural axioms and a mutex correspondence) proves the detectors sound and complete against the specifications and each runtime its avoidance set. Three deployed Rust runtimes realize L0-L1 (pessimistic locking, serializable snapshot isolation, default-SI), each verified against stale-generation and refined to its state machine; L2-L4 are exec-mode-verified with dependency-free prevention twins (A3, A6, A2: 0/1000 versus 1000/1000), and L2 is run live across three model families (A3 prevented in all 120 retracted sessions). We reproduce a silent lost update in ByteDance's deer-flow, formalizing its fix as a verified L_0 to L_1 refinement, and exhibit tool-effect reordering in LangGraph's ToolNode on unmodified output, removed by an L3 commit-order sequencer. The verified detector, refinements, and realizability artifacts are the contribution; the phenomena and lattice are classical.

Single-photon detectors based on the superconducting transition-edge sensor are used in a number of visible to near-infrared applications, particularly for photon-number-resolving measurements in quantum information science. To be practical for large-scale spectroscopic imaging or photonic quantum computing applications, the size of visible to near-infrared transition-edge sensor arrays and their associated readouts must be increased from a few pixels to many thousands. In this manuscript, we introduce the kinetic inductance current sensor, a scalable readout technology that exploits the nonlinear kinetic inductance in a superconducting resonator to make sensitive current measurements. Kinetic inductance current sensors can replace superconducting quantum interference devices for many applications because of their ability to measure fast, high slew-rate signals, their compatibility with standard microwave frequency-division multiplexing techniques, and their relatively simple fabrication. Here, we demonstrate the readout of a visible to near-infrared transition-edge sensor using a kinetic inductance current sensor with 3.7 MHz of bandwidth. We measure a readout noise of 1.4 pA/text{Hz}, considerably below the detector noise at frequencies of interest, and an energy resolution of (0.137 pm 0.001) eV at 0.8 eV, comparable to resolutions observed with non-multiplexed superconducting quantum interference device readouts.

We introduce the Graph Machine (GM), an architecture that maintains an O(n)-sized state and accesses it through sparse, dynamic routing. Unlike methods with fixed-size states or sparse but static routing, GM preserves O(n) complexity in its sparse layers without restricting the potentially accessible state size to O(1). Instead, GM uses edges - pointer-like objects updated differentiably by a referral mechanism resembling pointer chasing. We replace 75% of the dense Transformer layers in Qwen3-0.6B with GM sparse layers and pretrain from scratch on 15.7B tokens. With only 2 of 4,096 tokens retrieved per KV head in each sparse layer, loss degrades only slightly; with 4, the best model marginally improves loss.

We describe the universal Monte-Carlo event generator WHIZARD. The program automatically computes complete tree-level matrix elements, integrates them over phase space, evaluates distributions of observables, and generates unweighted event samples that can be used directly in detector simulation. There is no principal limit on the process complexity; using current hardware, the program has successfully been applied to hard scattering processes with up to eight particles in the final state. Matrix elements are computed as helicity amplitudes, so spin and color correlations are retained. The Standard Model, the MSSM, and many alternative models such as Little Higgs, anomalous couplings, or effects of extra dimensions or noncommutative SM extensions have been implemented. Using standard interfaces to PDF, beamstrahlung, parton shower and hadronization programs, WHIZARD generates complete physical events and covers physics at hadron, lepton, and photon colliders.

Quantum computation is inherently hybrid, and fast classical manipulation of qubit operators is necessary to ensure scalability in quantum software. We introduce PauliEngine, a high-performance C++ framework that provides efficient primitives for Pauli string multiplication, commutators, symbolic phase tracking, and structural transformations. Built on a binary symplectic representation and optimized bit-wise operations, PauliEngine supports both numerical and symbolic coefficients and is accessible through a Python interface. Runtime benchmarks demonstrate substantial speedups over state-of-the-art implementations. PauliEngine provides a scalable backend for operator-based quantum software tools and simulations.

On the way to Exascale, programmers face the increasing challenge of having to support multiple hardware architectures from the same code base. At the same time, portability of code and performance are increasingly difficult to achieve as hardware architectures are becoming more and more diverse. Today's heterogeneous systems often include two or more completely distinct and incompatible hardware execution models, such as GPGPU's, SIMD vector units, and general purpose cores which conventionally have to be programmed using separate tool chains representing non-overlapping programming models. The recent revival of interest in the industry and the wider community for the C++ language has spurred a remarkable amount of standardization proposals and technical specifications in the arena of concurrency and parallelism. This recently includes an increasing amount of discussion around the need for a uniform, higher-level abstraction and programming model for parallelism in the C++ standard targeting heterogeneous and distributed computing. Such an abstraction should perfectly blend with existing, already standardized language and library features, but should also be generic enough to support future hardware developments. In this paper, we present the results from developing such a higher-level programming abstraction for parallelism in C++ which aims at enabling code and performance portability over a wide range of architectures and for various types of parallelism. We present and compare performance data obtained from running the well-known STREAM benchmark ported to our higher level C++ abstraction with the corresponding results from running it natively. We show that our abstractions enable performance at least as good as the comparable base-line benchmarks while providing a uniform programming API on all compared target architectures.

When does a language model acquire a capability? Developmental studies usually answer this by tracking when models start producing the correct token. But that prediction passes through the unembedding matrix, or readout, which is itself still being learned during pretraining. We show that a model's hidden states can encode task information before its own readout expresses it, so timelines read from outputs conflate what the model encodes with what its readout expresses. To track the readout directly, we introduce parameter-trajectory crosscoding, which fits one sparse dictionary to every token's readout row at every checkpoint. Unlike crosscoders on activations, it needs only checkpoint weights. We use it to locate a narrow early window, 0.4-1.1% of the way through Pythia's pretraining, in which the readout reorganizes and WordNet word categories become decodable from its rows. By then, linear probes on the hidden states already decode task information that the model's own outputs do not yet show. To test whether such gaps depend on how fast the readout learns, we pretrain small models from scratch that differ only in the readout's learning rate. We find that raising it makes the readout develop earlier and the gap close sooner, with little effect on final loss. Together, these results imply that early in training, where many developmental transitions are dated, a behavioral date can reflect when the readout learns to express task information and not when the model learns it.

Practical large language model (LLM) services may involve a long system prompt, which specifies the instructions, examples, and knowledge documents of the task and is reused across numerous requests. However, the long system prompt causes throughput/latency bottlenecks as the cost of generating the next token grows w.r.t. the sequence length. This paper aims to improve the efficiency of LLM services that involve long system prompts. Our key observation is that handling these system prompts requires heavily redundant memory accesses in existing causal attention computation algorithms. Specifically, for batched requests, the cached hidden states (i.e., key-value pairs) of system prompts are transferred from off-chip DRAM to on-chip SRAM multiple times, each corresponding to an individual request. To eliminate such a redundancy, we propose RelayAttention, an attention algorithm that allows reading these hidden states from DRAM exactly once for a batch of input tokens. RelayAttention is a free lunch: it maintains the generation quality while requiring no model retraining, as it is based on a mathematical reformulation of causal attention.

Speculative decoding accelerates LLM inference, but SOTA hidden-state-based drafters suffer from long-range decay: draft accuracy degrades as the speculative step increases. Existing work attributes this decay to train-inference mismatch and proposes test-time training (TTT) as a remedy, yet we observe that long-range decay persists even in TTT-trained drafters. We revisit long-range decay from the perspective of context information preservation. In hidden-state reuse, we argue the target hidden state acts as a biased context compression: it aggregates historical token information according to the attention query at the current position, yielding a compact representation optimized for immediate next-token prediction. This compression can suppress information less relevant to the current query but important for later speculative steps. In contrast, the target model's KV cache serves as an explicit context, retaining the complete set of token-wise KV representations. We therefore posit the KV-Reuse Hypothesis: allowing the draft model to reuse the target KV cache can provide richer signals for long-horizon drafting. To test this hypothesis, we introduce KVShot, a diagnostic framework that compares three reuse paradigms: hidden-only, KV-only, and hybrid. Extensive evaluations on Qwen3-8B show that KV-Reuse improves long-range acceptance, although end-to-end speedups remain marginal under current training pipelines. Our analysis identifies two key structural bottlenecks: shallow drafters struggle to estimate target queries accurately, and draft-side KV projections receive sparse gradient signals. These findings suggest that realizing the full potential of KV-aware decoding requires moving beyond TTT toward block-wise training paradigms. By exposing these bottlenecks, KVShot provides a foundational diagnostic testbed and a clear roadmap for designing next-generation inference architectures.

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

As spaceborne computing systems increasingly rely on neural network (NN) accelerators, the opacity of commercial, black-box architectures severely restricts the development of verifiable radiation mitigation strategies. Open-source, register-transfer level (RTL)-accessible accelerators resolve this limitation by enabling user-defined instrumentation, yet few have empirical radiation-response baselines. This work establishes a foundational system-level proton-irradiation baseline for an unmitigated open-source Tensil NN accelerator deployed on a Zynq UltraScale+ SoC executing ResNet-20 inference. Under 20 to 58 MeV proton irradiation, we delivered 4.29 times 10^{10} p/cm^{2} within monitored operational windows. Seven workload interruptions required two restarts of the notebook process, four reboots or board resets, and one power-cycle sequence. Two output-corruption events returned incorrect CIFAR-10 classes without loss of service. In the longer event, the accelerator returned a class absent from the ten-image CIFAR-10 pool for 39 consecutive inputs at normal cadence. The process remained alive, while the kernel log, limited memory test, and sampled power showed no anomaly. Observation of the stuck-class sequence ended with scheduled bitstream reconfiguration. All nine onsets occurred under the nominal 4 cm beam, which exposed the SoC, LPDDR4, and additional board circuitry; none occurred under the 2 cm SoC-centered field. This pattern shows a field association but does not establish LPDDR4 as the cause because field size was confounded with run order and dose. Linux-managed accelerators require end-to-end content checks and recovery that reaches the state in which corruption can persist. This baseline documents availability loss and silent output corruption, supporting future software hardening of COTS FPGA-SoCs for neural-network inference in space systems.

Hardware prefetching is critical to fill the performance gap between CPU speeds and slower memory accesses. With multicore architectures becoming commonplace, traditional prefetchers are severely challenged. Independent core operation creates significant redundancy (up to 20% of prefetch requests are duplicates), causing unnecessary memory bus traffic and wasted bandwidth. Furthermore, cutting-edge prefetchers such as Pythia suffer from about a 10% performance loss when scaling from a single-core to a four-core system. To solve these problems, we propose CRL-Pythia, a coordinated reinforcement learning based prefetcher specifically designed for multicore systems. In this work, CRL-Pythia addresses these issues by enabling cross-core sharing of information and cooperative prefetching decisions, which greatly reduces redundant prefetch requests and improves learning convergence across cores. Our experiments demonstrate that CRL-Pythia outperforms single Pythia configurations in all cases, with approximately 12% IPC (instructions per cycle) improvement for bandwidth-constrained workloads, while imposing moderate hardware overhead. Our sensitivity analyses also verify its robustness and scalability, thereby making CRL-Pythia a practical and efficient solution to contemporary multicore systems.

Many-Shot In-Context Learning (ICL) has emerged as a promising paradigm, leveraging extensive examples to unlock the reasoning potential of Large Language Models (LLMs). However, existing methods typically rely on a predetermined, fixed number of shots. This static approach often fails to adapt to the varying difficulty of different queries, leading to either insufficient context or interference from noise. Furthermore, the prohibitive computational and memory costs of long contexts severely limit Many-Shot's feasibility. To address the above limitations, we propose AdapShot, which dynamically optimizes shot counts and leverages KV cache reuse for efficient inference. Specifically, we design a probe-based evaluation mechanism that utilizes output entropy to determine the optimal number of shots. To bypass the redundant prefilling computation during both the probing and inference phases, we incorporate a semantics-aware KV cache reuse strategy. Within this reuse strategy, to address positional encoding incompatibilities, we introduce a decoupling and re-encoding method that enables the flexible reordering of cached key-value pairs. Extensive experiments demonstrate that AdapShot achieves an average performance gain of around 10% and a 4.64x speedup compared to state-of-the-art DBSA.

As large language models (LLMs) continue to scale, the memory footprint of key-value (KV) caches during inference has become a significant bottleneck. Existing approaches primarily focus on compressing KV caches within a single prompt or reusing shared prefixes or frequently ocurred text segments across prompts. However, such strategies are limited in scenarios where prompts are semantically similar but lexically different, which frequently occurs in tasks such as multi-document summarization and conversational agents. We propose SemShareKV, a KV cache sharing and compression framework that accelerates LLM inference by reusing KVCache in semantically similar prompts. Instead of relying on exact token matches, SemShareKV applies fuzzy token matching using locality-sensitive hashing (LSH) on token embeddings and incorporates Rotary Position Embedding (RoPE) to better preserve positional information. By selectively reusing relevant key-value pairs from a reference prompt's cache, SemShareKV reduces redundant computation while maintaining output quality. Experiments on diverse summarization datasets show up to 6.25times speedup and 42\% lower GPU memory usage with 5k tokens input, with negligible quality degradation. These results highlight the potential of semantic-aware cache sharing for efficient LLM inference.

Memory-Mediated Learning Architecture (MMLA) separates slow base parameters theta, a bounded numerical policy carrier Phi, and a bounded authoritative memory M. Predictive Dual-State Adaptation (PDSA) lets feedback update Phi while one problem remains active and lets a trusted lifecycle atomically commit one typed row or exact NULL. Later reasoning may read both states, but their writers, resets, rollback domains, and ledgers remain distinct. Realized futures supervise values only during training; deployment is causal and future-blind. We give conditional theory and falsifiable contracts for reasoning-time updates, completed-segment consolidation, predictive admission, authoritative memory, and dual-state attribution. Assumptions, counterexamples, capacity and cost ledgers, recovery duties, and identifying experiments are explicit; these are not implementation guarantees. Controlled studies show exact lifecycle execution on 300/300 held-out records for each of three seeds, calibrated retrieval gains over frozen-hidden dense and BM25 baselines, and exact typed anchor-filler transport on 240/240 held-out records per seed. These validate restricted components, not natural-language memory management or complete PDSA. Post-training studies retain positive and negative evidence. Later protocols obtain restricted readout progress, but a nine-trajectory comparison finds that matched latent readout, a full-width bridge, and bridge plus frozen text-teacher alignment all fail continuous-event qualification across both task families. A separately adapted text reference and restoration checks pass. At the September 13, 2026 evidence cutoff, no strict policy-only reasoning-time-training effect, predictive-admission oracle margin, learned future-blind admission policy, or policy-by-memory factorial advantage is established.

Structured spatial data require quantum encodings that preserve geometric relations, expose measurable observables, and remain implementable on finite-depth hardware. This work introduces a quantum representation and circuit architecture for rigid-body transformations and specializes it to Denavit--Hartenberg kinematics of serial open-chain manipulators. Each translational contribution is factorized into a classical metric magnitude and a signed unit direction encoded by a single-qubit Bloch vector, while parameterized rotations reproduce the ordered propagation of frame directions. A selector register prepares probabilities proportional to the contribution magnitudes, and the reduced state of a designated readout qubit encodes their normalized weighted sum. The retained classical scale then reconstructs the metric end-effector position. Two additional readout qubits encode terminal-frame axes, providing a compact and geometrically interpretable pose interface. At the ideal expectation-value level, measured Pauli observables reproduce the corresponding classical kinematic quantities. Alternative circuit architectures realize the same representation with different tradeoffs in qubit count, circuit depth, controlled operations, and measurement requirements. Validation on a serial manipulator yields numerically negligible position and orientation reconstruction errors under ideal simulation. Finite-shot simulations, noisy executions, transpilation analysis, and a hardware demonstration further characterize statistical error, noise sensitivity, and implementation overhead without asserting computational advantage.

Memory leaks remain prevalent in real-world C/C++ software. Static analyzers such as CodeQL provide scalable program analysis but frequently miss such bugs because they cannot recognize project-specific custom memory-management functions and lack path-sensitive control-flow modeling. We present MemHint, a neuro-symbolic pipeline that addresses both limitations by combining LLMs' semantic understanding of code with Z3-based symbolic reasoning. MemHint parses the target codebase and applies an LLM to classify each function as a memory allocator, deallocator, or neither, producing function summaries that record which argument or return value carries memory ownership, extending the analyzer's built-in knowledge beyond standard primitives such as malloc and free. A Z3-based validation step checks each summary against the function's control-flow graph, discarding those whose claimed memory operation is unreachable on any feasible path. The validated summaries are injected into CodeQL and Infer via their respective extension mechanisms. Z3 path feasibility filtering then eliminates warnings on infeasible paths, and a final LLM-based validation step confirms whether each remaining warning is a genuine bug. On eight real-world C/C++ projects totaling over 3.6M lines of code, MemHint detects 54 unique memory leaks (53 confirmed/fixed) at approximately $1.7 per detected bug, compared to 19 by vanilla CodeQL and 3 by vanilla Infer.

Large language model (LLM) agents serving different users often solve related tasks, yet separate user histories can leave reusable experience inaccessible to other agents. Pooling memories expands access but risks transferring preferences that conflict with the receiving user's requirements. We introduce ShareMem, a memory architecture that shares reusable experience while grounding its application in the receiving user's own preferences. Shared experiences indicate how to act and which preferences to consult; the receiving user's memory supplies their concrete values. Two-stage consolidation refines experience locally before integrating accepted edits into a shared pool. During execution, scope-first retrieval jointly selects local and shared experiences under a common entry budget, while a user-bound channel supports initial and agent-initiated preference retrieval. We evaluate ShareMem across web navigation (Mind2Web), online personalized interaction (VitaBench~2.0), and multi-session coding (MemoryCode) with four backbone models. It improves step success, average task success, and dialogue-macro coding scores, respectively, over matched user-local memory across all four models. Ablations favor two-stage consolidation for smaller shared pools, lower induction token usage, and better downstream performance, and support complementarity between experience guidance and active preference retrieval. Further analyses show that sharing helps most when relevant local experience is scarce, while source quality and cross-user preference interference limit useful transfer.

JEV models make multimodal decisions by directly scoring candidates. Although the common context is encoded once, candidate evaluation can still repeat matching token histories, duplicate inference states, and execute the full backbone. In this paper, we study these sources of redundancy and present FastJEV for compact candidate evaluation. We jointly organize history reuse and state storage, since sharing computation requires preserving states for later branches. We first introduce shared context anchoring to reuse recurrent initial states and omit unused final recurrent caches. We extend this reuse through candidate prefix sharing, retaining the intermediate states needed by subsequent branches. To further reduce the depth of these paths, we apply decision guided pruning based on relative score changes measured on a small unlabeled set. Our method retains full context encoding and all candidates without additional training. We evaluate FastJEV across three OmniJev model sizes on five public benchmarks and reconstructed LIBERO-10 offline questions. At the selected pruning budgets, the complete method reduces candidate depth by 43.75% to 45.83%, while retaining 93.66% to 97.52% of the original task scores on average across the six evaluation sets. Through controlled experiments, we show how candidate overlap and branching structure affect the execution cost of history reuse. In our implementation, candidate prefix sharing can reduce repeated computation while increasing latency. These findings motivate designing sharing granularity and execution schedules together for efficient JEV inference.

Conversational memory changes during use, so endpoint question answering alone cannot establish how a persistent state accumulates, ages, or incorporates revisions. We introduce LSREP, a Longitudinal State-Replay Evaluation Protocol combining ordered replay, explicit lifecycle schedules, repeated probes, evolving reference answers, and mechanism-fidelity checks. Its architectural case study is ICE v2, a local-first memory middleware with typed stores, retrieval fusion, and dynamic context budgets. The private, single-user instantiation contains 1,985 turns, 219 distinct probes, and 1,211 probe-checkpoint observations across 52 checkpoints. On three ordinary-density datasets, ICE v2 has a near-zero mean quality difference from vector-RAG while selecting 32% fewer fragments but using 6.6% more estimated prompt tokens. A fourth, dense dataset exposes catastrophic failures of the unbudgeted baseline. The fidelity audit limits attribution: procedural retrieval is defective, several mechanisms are unexercised, and graph utility is not established. In a complementary matched public diagnostic, ICE v2 loses decisively to pure vector-RAG on LongMemEval: 50.8% versus 72.8% in the evidence-only oracle and 43.0% versus 69.5% in full-S. Paired differences are -22.0 points (95% CI [-26.6, -17.4]) and -26.5 ([-31.3, -21.8]). Conservative abstention accompanies severe multi-session and temporal failures. ICE uses less context in this diagnostic, establishing a quality-cost trade-off rather than superior efficiency. Together, replay, fidelity auditing, and public endpoint testing expose distinct failure modes that neither architectural descriptions nor aggregate scores identify alone.

When agentic sessions run to a million tokens with many sessions resident at once, the KV cache and the index that ranks it live in host memory, and the scan that ranks all n keys for a top-k step becomes the traffic that bounds decoding. We present Fathom, a key scan in which each query decides how many bits of each key channel to read. The 4-bit K cache is stored channel-major as bit planes, so a prefix of t planes is exactly the channel's t-bit quantizer, and the query spends its bit budget by reverse water-filling over the variance-weighted importance of its channels. At one million tokens on Qwen3-8B a decode step is 1.67x faster in GPU time than with the 136-bit scans of Double Sparsity, Loki and SparQ r=32, and in the same GPU time as SparQ's 68-bit read (r=16) Fathom reads 18% fewer bytes with lower attention error on six of seven model and context settings. On RULER-style tasks every per-token scan matches exact top-k decoding, and on real coding-agent sessions Fathom reaches the step agreement of the most accurate 136-bit scan at 92 bits. The store is the 4-bit K copy a quantized serving stack already holds, and the method is not faster when the index is resident in GPU memory.

LLM agents need memory to act consistently over long interactions, yet many systems use additional LLM calls to operate that memory. Generating intermediate records and mediating their retrieval adds recurring token and time costs, while omitted or merged details can obscure the original evidence. We ask whether structured memory access requires generation at all. Zero-Mem introduces zero-token memory operations: no step outside final question answering invokes an LLM or consumes LLM input or output tokens; encoder computation is accounted for separately. Zero-Mem preserves original interaction traces as its source of record. It organizes the traces in two complementary ways. An entity--context graph exposes connections across interactions, while a temporal hierarchy preserves conversational locality and session state. For each query, Zero-Mem weighs the two views, retrieves from both, and follows their structure to recover supporting relations or surrounding context. Deterministic calibration first discards conflicting evidence and then keeps the reader's answer grounded in the retrieved traces. Only the final-QA reader invokes an LLM. Across long-memory and long-context question-answering benchmarks, Zero-Mem achieves competitive performance while eliminating LLM calls and LLM-token consumption from memory operations. With the same final-QA reader and context budget, it reduces memory-operation time cost by 57.6\% relative to the fastest compared baseline. Ablations support the contribution of the two views and their query-dependent coordination. Overall, the results show that structured agent memory need not generate an intermediate representation of the past. After peer review, the code and implementation details will be available at blue{https://github.com/TheMoon0815/Zero-mem}.

Code pre-trained models (CodePTMs) have recently demonstrated significant success in code intelligence. To interpret these models, some probing methods have been applied. However, these methods fail to consider the inherent characteristics of codes. In this paper, to address the problem, we propose a novel probing method CAT-probing to quantitatively interpret how CodePTMs attend code structure. We first denoise the input code sequences based on the token types pre-defined by the compilers to filter those tokens whose attention scores are too small. After that, we define a new metric CAT-score to measure the commonality between the token-level attention scores generated in CodePTMs and the pair-wise distances between corresponding AST nodes. The higher the CAT-score, the stronger the ability of CodePTMs to capture code structure. We conduct extensive experiments to integrate CAT-probing with representative CodePTMs for different programming languages. Experimental results show the effectiveness of CAT-probing in CodePTM interpretation. Our codes and data are publicly available at https://github.com/nchen909/CodeAttention.

We propose a stronger formulation of RL on top of RWKV-style recurrent sequence models, in which the fixed-size recurrent state is explicitly interpreted as a belief state rather than an opaque hidden vector. Instead of conditioning policy and value on a single summary h_t, we maintain a compact uncertainty-aware state b_t = (μ_t, Σ_t) derived from RWKV-style recurrent statistics and let control depend on both memory and uncertainty. This design targets a key weakness of plain fixed-state policies in partially observed settings: they may store evidence, but not necessarily confidence. We present the method, a theoretical program, and a pilot RL experiment with hidden episode-level observation noise together with a test-time noise sweep. The pilot shows that belief-state policies nearly match the best recurrent baseline overall while slightly improving return on the hardest in-distribution regime and under a held-out noise shift. Additional ablations show that this simple belief readout is currently stronger than two more structured extensions, namely gated memory control and privileged belief targets, underscoring the need for richer benchmarks.

We describe an analysis comparing the pp elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in pp collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of s = 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the pp cross section. The two data sets disagree at the 3.4σ level and thus provide evidence for the t-channel exchange of a colorless, C-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same C-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in pp scattering. The combined significance of these results is larger than 5σ and is interpreted as the first observation of the exchange of a colorless, C-odd gluonic compound.

Parallel coding agents can independently produce locally valid changes while still interfering at integration time, expanding beyond planned scope, or relying on premises invalidated by concurrent work. Existing responses emphasize communication, isolated workspaces, late merge-time repair, continuous supervision, or post-hoc runtime recovery. This paper presents Claim Plane, a model-agnostic coordination architecture that treats concurrent software change as a pre-write admission problem. Before implementation, each worker declares a versioned ChangeIntent containing an exact base commit, typed resources, dependencies, and operations marked as committed or contingent. A deterministic control plane atomically admits compatible intents, constrains same-file parallelism to declared regions, serializes unresolved overlap, tracks dependency invalidation, and fails closed on ambiguous authority. During execution, a contingent mutation does not reserve write ownership initially; the first attempted mutation triggers atomic scope promotion and re-admission against the current active set. Brokered execution binds capabilities to intent versions, leases, OS-level worktree locks, monotonic fencing tokens, and Git-tree provenance, while integration verifies immutable patches and evidence. A preliminary six-pair CooperBench mechanism check is reported only as feasibility evidence: static Claim Plane achieved 6/6 pair passes with full serialization, while dynamic scope retained parallel admission on half of the pairs, performed seven successful scope promotions, and failed closed on two undeclared mutations. The sample is intentionally too small for comparative claims. We argue that separating probabilistic planning from deterministic authority provides a foundation for a future learned semantic-dependency model and frontier-model escalation only on unresolved cases.

We present PEEK, a lightweight scheduling and eviction framework for both online (streaming) and offline (batch) LLM serving; this paper focuses on the online regime. PEEK maintains an incremental radix tree over the pending queue, exposing prefix-sharing clusters no existing engine surfaces. A low-overhead dual-walk matches the tree against the engine's prefix cache to yield longest-prefix-match for every waiting request; PEEK then admits cluster pioneers first so siblings inherit the freshly cached prefix, a co-designed eviction hook protects blocks ancestral to queued demand, and a multi-lane stride scheduler bounds starvation. On SGLang and vLLM across five workloads up to 4timesH100 (DP=2 over TP=2), PEEK delivers up to 3.0times/2.6times cache hit, 7.9times/7.1times TTFT, 6.7times/5.5times E2E, and 3.6times/4.5times throughput gains over each engine's strongest stock baseline (SGLang/vLLM), while matching baselines within noise on workloads with no exploitable prefix structure. Wins hold as KV-cache pressure and inference parallelism scale.

Conditional memory expands language-model capacity through selective lookup, but the full embedding table must remain available for every possible input. We introduce Conditional Program (CP), a compressed representation that reconstructs only the rows an input requests. CP represents each row by a short code and a local scale, with a reconstruction program shared across the table. We instantiate this representation with a Gaussian trellis, norm restoration and independently decodable row records. CP's two-bit code lowers output KL by 41--63\% relative to 2-bit round-to-nearest. Analysis across three trained n-gram memory families shows that Gaussian-like coordinate statistics coexist with learned relationships among rows; at matched storage budgets, the shared trellis outperforms the fitted codebooks and low-rank residual variants we test. For DeepSeek, it reduces table storage from 203GB to 51GB, leaving room for larger workloads when the table is kept on GPU.

Agentic LLM systems that generate code through multi-turn tool use face a fundamental context problem: each session starts from zero, discarding the configuration choices, domain constraints, data schemas, and tool-use patterns that made previous sessions productive. Naively persisting entire conversation histories is token-inefficient and counterproductive: irrelevant context degrades generation quality. We introduce shared selective persistent memory, an architecture that identifies and retains four categories of reusable context (task specifications, data schemas, tool configurations, and output constraints) while discarding session-specific reasoning traces. Crucially, this memory is shared: workspaces encapsulating selective memory can be transferred across users with role-based access control, enabling collaborative reuse without redundant specification. We implement it in a deployed collaborative workspace platform where LLM agents produce, edit, and maintain git-versioned artifacts (dashboards, reports, and data-driven documents) from heterogeneous sources (CSV, SQL, REST APIs, and MCP servers). A complementary zero-token data refresh mechanism decouples generated programs from runtime data, enabling artifact reuse without re-invocation. Across three enterprise scenarios, shared selective persistent memory achieves 96% task completion (vs. 79% without memory and 71% with full history). Zero-token refresh eliminates LLM re-invocation for recurring updates (14x task-time reduction), while summary-driven generation cuts per-invocation token cost by 97x versus raw data injection. A replication on four public datasets confirms generalizability, with zero-token refresh succeeding in 12/12 trials. Notably, naive full-history persistence actively degrades completion by biasing the agent with stale traces, while selective memory outperforms both extremes.

We introduce a new heuristic decoder, Relay-BP, targeting real-time quantum circuit decoding for large-scale quantum computers. Relay-BP achieves high accuracy across circuit-noise decoding problems: significantly outperforming BP+OSD+CS-10 for bivariate-bicycle codes and comparable to min-weight-matching for surface codes. As a lightweight message-passing decoder, Relay-BP is inherently parallel, enabling rapid low-footprint decoding with FPGA or ASIC real-time implementations, similar to standard BP. A core aspect of our decoder is its enhancement of the standard BP algorithm by incorporating disordered memory strengths. This dampens oscillations and breaks symmetries that trap traditional BP algorithms. By dynamically adjusting memory strengths in a relay approach, Relay-BP can consecutively encounter multiple valid corrections to improve decoding accuracy. We observe that a problem-dependent distribution of memory strengths that includes negative values is indispensable for good performance.

LLM agents today communicate via text, which incurs considerable latency and information loss due to the need to autoregressively decode the sharer model's state and encode at the receiver model. Recent work such as Cache-to-Cache (C2C; Fu et al., 2026) seeks to exchange KV caches by learning adapters that translate sharer KV matrices to the receiver model. However, the adapters are large and expensive to train, and translate individual tokens, which requires the target context to be identical. This is unsuitable for agent communication, where the LLMs have differing context. We introduce Latent Cache Flow (LCF). To address efficiency, we observe that keys and values can be jointly translated and compressed, reducing the adapter to about 4% of C2C's size. To address differing context, we design the adapter to transmit a summary of new information that the target model does not have. Our early experiments show that a pruned 13 MB LCF adapter can be more accurate than C2C at 956 MB in shared-context settings; for different contexts, LCF improves F1 by 7.5% and Exact Match by 23% while 8.5 times faster than text-based communication.

Liquid argon time projection chambers (LArTPCs) provide dense, high-fidelity 3D measurements of particle interactions and underpin current and future neutrino and rare-event experiments. Physics reconstruction typically relies on complex detector-specific pipelines that use tens of hand-engineered pattern recognition algorithms or cascades of task-specific neural networks that require extensive, labeled simulation that requires a careful, time-consuming calibration process. We introduce Panda, a model that learns reusable sensor-level representations directly from raw unlabeled LArTPC data. Panda couples a hierarchical sparse 3D encoder with a multi-view, prototype-based self-distillation objective. On a simulated dataset, Panda substantially improves label efficiency and reconstruction quality, beating the previous state-of-the-art semantic segmentation model with 1,000times fewer labels. We also show that a single set-prediction head 1/20th the size of the backbone with no physical priors trained on frozen outputs from Panda can result in particle identification that is comparable with state-of-the-art (SOTA) reconstruction tools. Full fine-tuning further improves performance across all tasks.

Hybrid language models like Jamba mix attention layers with State Space Models (SSMs), creating two memory cache types with opposite profiles: Key-Value (KV) caches grow linearly with sequence length, while SSM states stay fixed per layer. Current inference engines handle this poorly. Unified pools pad SSM states to attention page sizes, wasting up to 7.3x capacity. Static dual pools cannot adapt when prompt distributions shift between requests. We present Asymmetric Virtual Memory Paging (AVMP). The allocator separates the two cache types into physically distinct pools behind a unified virtual address space, and migrates capacity between pools when one runs out. Migration triggers only on allocation failure, keeping behavior deterministic. We evaluate AVMP across 270 synthetic cells plus 60 cells of ShareGPT trace replay on an RTX 3060 12GB. Out-of-Memory events drop 7.6% and request throughput improves 1.83x to 13.3x across synthetic workloads and 2.36x on ShareGPT. All gains hold under paired-bootstrap 95% confidence intervals. A phase-time breakdown reveals two distinct mechanisms: shorter OOM recovery on capacity-pressured workloads, and faster allocation calls on KV-heavy workloads. Implementation is pure Python; Triton integration is future work.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

Despite their strong performance on reasoning tasks, large reasoning models (LRMs) often suffer from overthinking, producing unnecessarily long outputs and incurring high end-to-end latency, a significant limitation to their real-world deployment. To address overthinking, early-exit mechanisms have been proposed to terminate reasoning before typical completion, showing that this approach can effectively shorten generation length with minimal impact on accuracy. However, their reliance on probing mechanisms introduces a detection overhead that limits their end-to-end latency gains and compromises their generalizability across diverse problems. Inspired by the use of hidden states in speculative decoding, we propose SpecExit, a novel framework that predicts both future tokens and an early-exit signal directly from a lightweight draft model without probing overhead. Our method offers significant improvements, reducing average generation length by 66\% and achieving a 2.5x speedup in end-to-end latency compared to the speculative decoding baseline, without compromising accuracy. Our method leverages the inherent signals from hidden states to provide effective early-exit signals, suggesting broader use of hidden states for efficient reasoning. Our code is available at https://github.com/Tencent/AngelSlim.

The limited context window of contemporary large language models (LLMs) remains a huge barrier to their broader application across various domains. While continual pre-training on long-context data is a straightforward and effective solution, it incurs substantial costs in terms of data acquisition and computational resources. To alleviate this issue, we propose SharedLLM, a novel approach grounded in the design philosophy of multi-grained context compression and query-aware information retrieval. SharedLLM is composed of two short-context LLMs such as LLaMA-2, termed upper model and lower model. The lower model functions as a compressor while the upper model acts as a decoder. The upper model receives compressed, multi-grained context information from the lower model and performs context-aware modeling on the running text. Information transfer between the compressor and decoder occurs only at the lowest layers to refrain from long forward paths in the lower model and redundant cross-attention modules in the upper model. Based on this architecture, we introduce a specialized tree-style data structure to efficiently encode, store and retrieve multi-grained contextual information for text chunks. This structure, combined with a search algorithm, enables rapid encoding and retrieval of relevant information from various levels of the tree based on the input query. This entire process, wherein the sender and receiver are derived from the same LLM layer, is referred to as self-injection.

Multi-agent LLM systems split work across models, so answering often requires knowledge that sits in another agent's context: a Sharer has encoded information that a Receiver needs to complete its task. They usually communicate by exchanging text, which puts autoregressive decoding on the critical path and reduces the exchange to a discrete message written without sight of the receiver's state. Recent latent protocols instead translate the sharer's key-value (KV) cache into the receiver's: C2C supports heterogeneous models but requires both to read the same input, while LCF-X removes this shared-context requirement through position-free sharer-cache pooling. Three restrictions remain: LCF-X compresses the sharer alone, supplies the same layer-local summary to every receiver position with no joint cross-layer memory to retrieve from, and assumes matched layer count and KV geometry. We introduce XKV, which lifts all three: learned-query attention pools both caches; self-attention over receiver-aligned layer tokens, with a learned layer map reconciling different depths, mixes the pooled summaries into a compact joint memory; and a shared position decoder lets every raw receiver cache position retrieve its own per-head-gated residual in the receiver's native KV geometry. Both models stay frozen and may differ in family, depth, KV-head count, head dimension, and tokenizer; only the translator is trained. Across 45 dataset-model-pair settings (six heterogeneous and three same-model ordered pairings, five datasets), XKV attains the highest macro score and best average rank, improving on LCF-X on every dataset (by 4.6 exact-match and 4.2 F1 points on ROPES) and surpassing text communication on four of the five, while training 76% fewer parameters and translating a cache pair 10.3x faster (5.8 vs. 59.9 ms); end to end, XKV is 26% faster than LCF-X and 6.8x faster than text communication.

Whether attention key value (KV) states computed for one prompt for a small LLM can be reused to accelerate inference on a new similar prompt, giving an increase to the space to its context memory using an approach called token recycling. Using a standard Hugging Face setup with DialoGPT-medium (a 345M parameter GPT-2 style decoder trained on 147M Reddit exchanges, 2005 to 2017) as the testbed, we build a cache of past activations and get entries by sentence embeddings, then reuse cached past key values when the cached prompt is an exact prefix of the new input. We compare recycled vs. baseline runs on latency and output fidelity, and log reuse depth in tokens. Reproducibility requires no model modifications, cached KVs are serialized to the CPU, reloaded, and supplied to the generate function to continue decoding from the cached prefix. In tests, we observe consistent speedups when prefix overlap exists, with no material degradation in output semantics, and when overlap is absent, behavior matches baseline.

Concurrent LLM agents sharing mutable natural-language state produce Structural Race Conditions (SRCs): write-write and cross-shard stale-read conflicts that silently corrupt agent output. Existing multi-agent frameworks (LangGraph, CrewAI, AutoGen) provide no write-ownership semantics over shared state. We present S-Bus, an HTTP middleware whose central mechanism is a server-side DeliveryLog: a per-agent log of HTTP GET operations that automatically reconstructs each agent's read set at commit time without agent SDK changes under HTTP/1.1. The consistency property the DeliveryLog provides -- Observable-Read Isolation (ORI), a partial causal consistency over the HTTP-observable projection of the read set -- prevents structural race conditions when agents collaborate via shared shards. Three contributions: (C1) The DeliveryLog mechanism for automatic HTTP-traffic-based read-set reconstruction, with three-tier mechanised evidence: ReadSetSoundness and ORICommitSafety machine-checked in TLAPS (modulo one retained typing axiom); exhaustive TLC at N=3 (20,763,484 distinct states, zero violations); Dafny discharges 9 inductive soundness lemmas. (C2) Empirical structural-conflict prevention parity against PostgreSQL 17 SERIALIZABLE and Redis 7 WATCH/MULTI on shared-shard contention sweeps with 427,308 active HTTP-409 conflicts: zero Type-I corruptions across all three backends. (C3) ORI's operating envelope is topology-conditional: semantically neutral in dedicated-shard workloads; harmful in single-shard collaborative writing because preservation propagates concurrent contradictions. Source code: https://github.com/sajjadanwar0/sbus

Key-Value (KV) cache has become a bottleneck of LLMs for long-context generation. Despite the numerous efforts in this area, the optimization for the decoding phase is generally ignored. However, we believe such optimization is crucial, especially for long-output generation tasks based on the following two observations: (i) Excessive compression during the prefill phase, which requires specific full context impairs the comprehension of the reasoning task; (ii) Deviation of heavy hitters occurs in the reasoning tasks with long outputs. Therefore, SCOPE, a simple yet efficient framework that separately performs KV cache optimization during the prefill and decoding phases, is introduced. Specifically, the KV cache during the prefill phase is preserved to maintain the essential information, while a novel strategy based on sliding is proposed to select essential heavy hitters for the decoding phase. Memory usage and memory transfer are further optimized using adaptive and discontinuous strategies. Extensive experiments on LongGenBench show the effectiveness and generalization of SCOPE and its compatibility as a plug-in to other prefill-only KV compression methods.

As fine-tuning becomes impractical at scale, probing is emerging as the preferred evaluation protocol. However, standard linear probing can understate the capability of models whose pre-training optimizes local representations rather than an explicit global representation. This motivates attentive probing, an alternative that uses attention to selectively aggregate patch-level features. Despite growing adoption, attentive probing is still underexplored: existing approaches are often over-parameterized and computationally inefficient. In this work, we revisit attentive probing through the lens of the accuracy vs. parameter-efficiency trade-off. We present the first comprehensive study of existing methods, analyzing their design choices and benchmarking their performance. Building on these insights, we propose efficient probing (EP), a lightweight yet effective multi-query cross-attention mechanism that eliminates redundant projections and reduces the number of trainable parameters. Across multiple benchmarks and pre-training paradigms, EP consistently outperforms linear probing and previous attentive probing methods, and remains effective when combined with parameter-efficient fine-tuning. Beyond evaluation, our analysis uncovers emerging properties of EP, including complementary attention maps, which open new directions for leveraging probing beyond protocol design. Project page: https://vrg.fel.cvut.cz/ep/.

As Rust gains traction for developing safer systems software, a reality check for the microcontroller hardware segment becomes necessary. How ready is the Rust ecosystem for this segment? Can Rust compete with C in practice? This paper reports on an IoT industrial case study that contributes to answering these questions. Two teams concurrently developing the same functionality (one in C, one in Rust) are analyzed over a period of several months. A comparative analysis of their approaches, results, and iterative efforts is provided. The analysis and measurements on hardware indicate no strong reason to prefer C over Rust for microcontroller firmware on the basis of memory footprint or execution speed. Furthermore, Ariel OS is shown to provide an efficient and portable system runtime in Rust whose footprint is smaller than that of the state-of-the-art bare-metal C stack traditionally used in this context. It is concluded that Rust is a sound choice today for firmware development in this domain.

Large language models (LLMs) handle many tasks with one set of parameters, but under KV-cached inference it is unclear what task-general structure, if any, is used at decode time rather than during prefill. We propose DecodeShare, a protocol that identifies a low-dimensional subspace consistently shared across tasks in decode-time hidden states, and then tests its causal role by removing that subspace only during decoding. In our experiments, disturbing the discovered shared subspace degrades decision performance far more than disturbing either a prefill-derived or random subspace under the same intervention budget. We further show this decode-shared subspace has practical consequences for activation steering: common steering directions can overlap the task-general decode channel. Projecting out this shared subspace directly separates the functional roles of the two components, while evaluating steering vectors at decode-time yields more reliable signal for downstream deployment than prefill-based proxies. Despite its compactness, the shared subspace can serve as a high-leverage causal channel at decode time. Code is available at: https://github.com/Zishan-Shao/decodeshare.git.

Jet taggers built on the Lund declustering tree encode QCD radiation structure in the inputs and process it with graph networks. We ask whether the tree itself can also constrain the computation, and what becomes accessible when it does. For this, we construct a novel quantum-inspired Tree Tensor Network (TTN), where a single tensor core is shared among the internal nodes of the Cambridge/Aachen declustering tree, employing Lund coordinates, and with no particle-identification or detector-level information. The construction is based on a strong prior on the radiation history rather than on the constituents, complementary to compact equivariant taggers. Because the same learned map acts identically at every node, the trained model can be evaluated on truncated trees and its latent space compared across recursions, and used to localise where on the Lund jet plane the Pythia and Herwig jet representations diverge, showing the regions of generator-dependent concentration. The χ=8 model has 4014 trainable parameters against approximately 391,000 for LundNet. We evaluate boosted top tagging and quark/gluon discrimination at particle level on Pythia and Herwig samples, in both native (PythiatoPythia) and transfer (PythiatoHerwig) configurations. Despite differing in capacity by two orders of magnitude, the TTN reaches native performance close to LundNet in quark/gluon discrimination, slightly underperforming in top tagging, with a similar Pythia-to-Herwig transfer behavior in both tasks. Finally, we show the behavior of the network as a function of the bond dimension, and as a function of the perturbative scale.

Rust supports type conversions and safe Rust guarantees the security of these conversions through robust static type checking and strict ownership guidelines. However, there are instances where programmers need to use unsafe Rust for certain type conversions, especially those involving pointers. Consequently, these conversions may cause severe memory corruption problems. Despite extensive research on type confusion bugs in C/C++, studies on type confusion bugs in Rust are still lacking. Also, due to Rust's new features in the type system, existing solutions in C/C++ cannot be directly applied to Rust. In this paper, we develop a static analysis tool called TYPEPULSE to detect three main categories of type confusion bugs in Rust including misalignment, inconsistent layout, and mismatched scope. TYPEPULSE first performs a type conversion analysis to collect and determine trait bounds for type pairs. Moreover, it performs a pointer alias analysis to resolve the alias relationship of pointers. Following the integration of information into the property graph, it constructs type patterns and detects each type of bug in various conversion scenarios. We run TYPEPULSE on the top 3,000 Rust packages and uncover 71 new type confusion bugs, exceeding the total number of type confusion bugs reported in RUSTSEC over the past five years. We have received 32 confirmations from developers, along with one CVE ID and six RUSTSEC IDs.

Repeatedly sampling short sequence windows from a human pangenome requires an access representation as well as compression. panvram stores each assembly as a reference-relative block archive and pools these archives on a GPU. For 558 haplotype assemblies, the default q4k representation occupies 16.642 GB of persistent pools including the decoded reference; a packed-reference, compact-directory representation occupies 11.634 GB. These quantities are not peak application memory. In the C1 experiment, default and fully compact forms delivered 743,271 and 736,762 windows/s; a separate public Colab run delivered 741,931 and 680,760 windows/s. All are batch API measurements and must not be pooled as repeated trials of an identical environment. Full-decoding checks compared reconstructed FASTA checksums with the manifest. On the CPU, the M6 shuffled-window workload at the same cohort cardinality reported 26 requests/s for AGC and 145,222 requests/s for refrel3 q4k. This comparison concerns one-thread requests of 4 KiB on the recorded warm-cache workload, not all genome-access patterns. AGC provides the smaller incremental archive: 5.40 MB/assembly versus 13.04 MB/assembly for refrel3 q16k, with different exclusions; the size pair is not the same refrel3 configuration as the q4k timing pair. We derive an expected-work expression for fixed independent granules and distinguish it from an empirical median-latency predictor. Cohort-scale counter and DRAM measurements motivate a locality hypothesis, but do not establish a causal per-miss latency or independently reproduce a model-failure verdict. The window-cost verdict at N=558 is published with its harness and raw timings.

Recent advances in 1-bit Large Language Models (LLMs), such as BitNet and BitNet b1.58, present a promising approach to enhancing the efficiency of LLMs in terms of speed and energy consumption. These developments also enable local LLM deployment across a broad range of devices. In this work, we introduce bitnet.cpp, a tailored software stack designed to unlock the full potential of 1-bit LLMs. Specifically, we develop a set of kernels to support fast and lossless inference of ternary BitNet b1.58 LLMs on CPUs. Extensive experiments demonstrate that bitnet.cpp achieves significant speedups, ranging from 2.37x to 6.17x on x86 CPUs and from 1.37x to 5.07x on ARM CPUs, across various model sizes. The code is available at https://github.com/microsoft/BitNet.

Accurate and efficient detector simulation is essential for modern collider experiments. To reduce the high computational cost, various fast machine learning surrogate models have been proposed. Traditional surrogate models for calorimeter shower modeling train separate networks for each particle species, limiting scalability and reuse. We introduce AllShowers, a unified generative model that simulates calorimeter showers across multiple particle types using a single generative model. AllShowers is a continuous normalizing flow model with a Transformer architecture, enabling it to generate complex spatial and energy correlations in variable-length point cloud representations of showers. Trained on a diverse dataset of simulated showers in the highly granular ILD detector, the model demonstrates the ability to generate realistic showers for electrons, photons, and charged and neutral hadrons across a wide range of incident energies and angles without retraining. In addition to unifying shower generation for multiple particle types, AllShowers surpasses the fidelity of previous single-particle-type models for hadronic showers. Key innovations include the use of a layer embedding, allowing the model to learn all relevant calorimeter layer properties; a custom attention masking scheme to reduce computational demands and introduce a helpful inductive bias; and a shower- and layer-wise optimal transport mapping to improve training convergence and sample quality. AllShowers marks a significant step towards a universal model for calorimeter shower simulations in collider experiments.

Fast, scalable decoding architectures that operate in a block-wise parallel fashion across space and time are essential for real-time fault-tolerant quantum computing. We introduce a scalable AI-based pre-decoder for the surface code that performs local, parallel error correction with low decoding runtimes, removing the majority of physical errors before passing residual syndromes to a downstream global decoder. This modular architecture is backend-agnostic and composes with arbitrary global decoding algorithms designed for surface codes, and our implementation is completely open source. Integrated with uncorrelated PyMatching, the pipeline achieves end-to-end decoding runtimes of order O(1 μs) per round at large code distances on NVIDIA GB300 GPUs while reducing logical error rates (LERs) relative to global decoding alone. In a block-wise parallel decoding scheme with access to multiple GPUs, the decoding runtime can be reduced to well below O(1 μs) per round. We observe further LER improvements by training a larger model, outperforming correlated PyMatching up to distance-13. We additionally introduce a noise-learning architecture that infers decoding weights directly from experimentally accessible syndrome statistics without requiring an explicit circuit-level noise model. We show that purely data-driven graph weight estimation can nearly match uncorrelated PyMatching and exceed correlated PyMatching in certain regimes, enabling highly-optimized decoding when hardware noise models are unknown or time-varying, as well as training pre-decoders with realistic noise models. Together, these results establish a practical, modular, and high-throughput decoding framework suitable for large-distance surface-code implementations.

Speculative decoding accelerates LLM inference by verifying multiple drafted tokens in parallel, allowing a single target forward pass to accept several tokens. By construction, verification computes representations for both accepted and rejected tokens. Yet, conventional drafters retain only the representations of accepted tokens, leaving the substantial verifier computation spent on rejected tokens effectively wasted. We find that these discarded hidden states generated during target forward retain useful information about future tokens that can improve subsequent drafts. However, realizing this opportunity poses two distinct challenges. At inference, recycling overhead can increase drafting latency, diminishing the speedup gained from increased acceptance length. During training, standard parallel drafter training does not produce inference-aligned rejected states, while obtaining them through sequential rollouts would sacrifice parallelism across training positions. We introduce Carryover Drafting, which addresses both challenges. Carryover recycles rejected target hidden states as temporary KV context, allowing the drafter to selectively attend to them. It reuses the drafter's existing interface and adds only a single learned embedding to distinguish rejected states from committed context. The additional KV context is replaced each drafting round, keeping its length bounded by one proposal block. We introduce parallel draft--verify--draft training that exposes the drafter to inference-aligned rejected states while preserving parallelism across training positions. Experiments with DFlash and a DSpark-derived semi-autoregressive drafter across two target models show that this simple Carryover mechanism improves average acceptance length by 6.5--14.7% and end-to-end vLLM speedup by 7.9--14.4% over the corresponding baselines, with speedup gains reaching 28.8% on translation.

Long-running LLM agents keep valuable state resident on GPUs: KV caches, request schedulers, communication state, and sometimes online adapters. Losing this state after a GPU or communicator failure can discard minutes to hours of work, yet existing recovery mechanisms either restart the whole serving stack or require application-specific checkpoint logic inside every attention and runtime component. This paper argues that fault tolerance for such workloads needs a GPU-resident execution context: checkpoint hooks must run at device synchronization points, observe binary kernels that frameworks and libraries actually execute, and recover without putting the host CPU on the critical path. We present Concordia, a runtime that uses a device-resident persistent kernel as the substrate for fault-tolerant LLM inference. Concordia interposes on GPU module loading and supports PTX- and SASS-level instrumentation, allowing checkpoint and pause hooks to be inserted below framework code and library boundaries. For each registered LLM state region, Concordia JIT-compiles a specialized delta-checkpoint handler -- for example, a KV-block scanner, adapter-page scanner, or recovery applier -- and hot-swaps it into the persistent kernel's operator table. The persistent kernel consumes a lock-free ring buffer of compute, checkpoint, append-log, and recovery tasks, so the same always-on executor triggers dirty-page detection, stages deltas, and appends committed records to a CPU-visible log in CXL memory or host DRAM.

Generalized code surgery is a versatile and low-overhead technique for performing fault-tolerant computation on quantum low-density parity-check (qLDPC) codes. In many settings, surgery exhibits practical space overheads, while its time overhead remains a bottleneck at O(d) syndrome rounds per operation. In this work, we construct surgery gadgets that perform parallel logical measurements on 2D hypergraph product codes in constant time overhead (O(1)) and near-constant space overhead (O(1)). The reduced time overhead is a result of amortization, as we show, following the formulation by Cowtan et al. (arXiv:2510.14895), that performing d surgery operations in O(d) time is fault tolerant. Our gadgets combine the strengths of different approaches to fault-tolerant logical operations: they partially retain the flexibility of surgery while achieving overheads comparable to transversal gates. Consequently, they are well-suited for near-term experimental realization and demonstrate new possibilities in the design of gadgets for fast logical computation.

Prompt-specialized multi-agent systems enable multiple agents to share a model while performing complementary roles to solve complex tasks. However, agent-specific prefixes change the KV cache generated for the same shared context, causing each agent to repeatedly prefill the growing context and construct a separate cache with high computation and memory overhead. Selective recomputation reduces this redundancy but still retains substantial model execution, while existing delta correction methods either support only recurring context relations or maintain memory-intensive online correction states for dynamically changing context. For first seen shared context, these methods also construct a reference cache outside the agent workflow, and an approximate correction at the first agent affects the outputs passed to subsequent agents. We present KVCMAS, an online KV cache correction framework that represents cross-agent cache deviations using compact low-rank states and seamlessly chains corrections along the agent workflow without an additional reference prefill. This design supports dynamically changing shared context while preserving an exact first-agent cache. Across multiple language and vision-language workloads, KVCMAS matches or improves the accuracy of prior KV cache sharing methods while achieving the lowest TTFT under highly concurrent serving. Under controlled serving traces, it provides a 2.0x TTFT speedup over inference without KV cache sharing and reduces peak GPU memory by up to 3.7x relative to a prior KV cache correction method. These results establish KVCMAS as an accurate and scalable KV cache sharing approach for prompt-specialized multi-agent serving.

Large language models (LLMs) have been widely applied but face challenges in efficient inference. While quantization methods reduce computational demands, ultra-low bit quantization with arbitrary precision is hindered by limited GPU Tensor Core support and inefficient memory management, leading to suboptimal acceleration. To address these challenges, we propose a comprehensive acceleration scheme for arbitrary precision LLMs. At its core, we introduce a novel bipolar-INT data format that facilitates parallel computing and supports symmetric quantization, effectively reducing data redundancy. Building on this, we implement an arbitrary precision matrix multiplication scheme that decomposes and recovers matrices at the bit level, enabling flexible precision while maximizing GPU Tensor Core utilization. Furthermore, we develop an efficient matrix preprocessing method that optimizes data layout for subsequent computations. Finally, we design a data recovery-oriented memory management system that strategically utilizes fast shared memory, significantly enhancing kernel execution speed and minimizing memory access latency. Experimental results demonstrate our approach's effectiveness, with up to 2.4\times speedup in matrix multiplication compared to NVIDIA's CUTLASS. When integrated into LLMs, we achieve up to 6.7\times inference acceleration. These improvements significantly enhance LLM inference efficiency, enabling broader and more responsive applications of LLMs.

Classical deep neural networks can learn rich multi-particle correlations in collider data, but their inductive biases are rarely anchored in physics structure. We propose quantum-informed neural networks (QINNs), a general framework that brings quantum information concepts and quantum observables into purely classical models. While the framework is broad, in this paper, we study one concrete realisation that encodes each particle as a qubit and uses the Quantum Fisher Information Matrix (QFIM) as a compact, basis-independent summary of particle correlations. Using jet tagging as a case study, QFIMs act as lightweight embeddings in graph neural networks, increasing model expressivity and plasticity. The QFIM reveals distinct patterns for QCD and hadronic top jets that align with physical expectations. Thus, QINNs offer a practical, interpretable, and scalable route to quantum-informed analyses, that is, tomography, of particle collisions, particularly by enhancing well-established deep learning approaches.

We review thirteen generative systems and five supporting datasets for quantum circuit and quantum code generation, identified through a structured scoping review of Hugging Face, arXiv, and provenance tracing (January-February 2026). We organize the field along two axes: artifact type (Qiskit code, OpenQASM programs, circuit graphs); crossed with training regime (supervised fine-tuning, verifier-in-the-loop RL, diffusion/graph generation, agentic optimization); and systematically apply a three-layer evaluation framework covering syntactic validity, semantic correctness, and hardware executability. The central finding is that while all reviewed systems address syntax and most address semantics to some degree, none reports end-to-end evaluation on quantum hardware (Layer 3b), leaving a significant gap between generated circuits and practical deployment. Scope note: quantum code refers throughout to quantum program artifacts (QASM, Qiskit); we do not cover generation of quantum error-correcting codes (QEC).

Capable open-weight models make local coding and reasoning attractive, but their context and execution state strain laptop memory. We present JustFit, an MLX-based inference runtime that combines KVExec for compressed KV execution, PhaseSwap for component residency, and StateTrans for state-preserving serving transitions. These mechanisms fuse reconstruction and coordinate just-in-time materialization and release, independently of model-weight quantization. In full-execution capacity tests on a 24 GiB M4 Pro MacBook running Qwen3.8-27B MXFP4, three independent runs complete 196,608 input and 16,384 output tokens, increasing completed single-request context from the mlx-vlm baseline's 30,720 positions to 212,992 (6.93x); a separate two-request run retains 229,376 positions in aggregate. In separate performance tests, a 32K-input, 64-output probe reaches 19.11 tokens/s, and a repeated 32K+6K workload has a median peak process footprint of 16,374 MiB. The integrated runtime answers 29 of 30 AIME 2026 problems correctly, showing how compact state and lifetime-aware execution expand local serving capacity while supporting extended generated reasoning.

LLM agents increasingly take on long-running tasks whose history grows far beyond a single model context window. Existing approaches compress earlier interactions or extract selected information into fixed memory representations, committing to what to preserve before future needs are known. We present Scroll, a context manager that treats each agent session as an executable Session Environment. The environment is backed by an append-only Event Log and a sandboxed, persistent Python kernel. The kernel maintains a typed namespace across model calls, allowing tool outputs, retrieved history, and derived state to be bound to variables rather than serialized into the prompt at each call. Model-written code searches, materializes, and transforms session state through exec; only explicitly printed projections enter the model's working view for the next call. Context management thus becomes a programming task that inherits the improving coding abilities of LLMs, while the Event Log preserves lossless historical ground truth. As the working view approaches its budget, stale spans are evicted but remain recoverable: an eviction index keeps compact landmarks tied to exact Event Log addresses, so that the agent navigates directly to evicted regions instead of searching the full log. With Qwen3.8-Max as the backbone, Scroll achieves 94.8% on LongMemEval_S; 73.1% on BEAM_10M, surpassing the best published memory system by 5.1 points; and 86.7% on LOCA_256K, exceeding the best published long-horizon agent by 37.4 points.

Large Language Models exhibit paradoxical fragility in fundamental arithmetic, implying a disconnect between internal computation and discrete output. By analyzing the residual stream geometry during multi-operand addition, we identify the Iso-Raw-Sum Trajectory (IRST), a geometric structure where representations are anchored by semantic digits and modulated by continuous carry fibers. We propose the Noisy Quantization Model to explain this geometry, framing arithmetic errors as Geometric Slippages caused by internal neural noise pushing a continuous, latent Carry Potential across quantization thresholds. This geometric framework further elucidates Probe Versatility, explaining how lightweight probes can disentangle coexisting latent signals (such as ground truth versus hallucination) from a single activation vector. Finally, we validate these insights through a geometric consistency check method that effectively detects and corrects these quantization failures during inference. Our code is available at https://github.com/RL-MIND/Shape-of-Addition.

Sparse matrices, more specifically SpGEMM kernels, are commonly found in a wide range of applications, spanning graph-based path-finding to machine learning algorithms (e.g., neural networks). A particular challenge in implementing SpGEMM kernels has been the pressure placed on DRAM memory. One approach to tackle this problem is to use an inner product method for the SpGEMM kernel implementation. While the inner product produces fewer intermediate results, it can end up saturating the memory bandwidth, given the high number of redundant fetches of the input matrix elements. Using an outer product-based SpGEMM kernel can reduce redundant fetches, but at the cost of increased overhead due to extra computation and memory accesses for producing/managing partial products. In this thesis, we introduce a novel SpGEMM kernel implementation based on the row-wise product approach. We leverage atomic instructions to merge intermediate partial products as they are generated. The use of atomic instructions eliminates the need to create partial product matrices. To evaluate our row-wise product approach, we map an optimized SpGEMM kernel to a custom accelerator designed to accelerate graph-based applications. The targeted accelerator is an experimental system named PIUMA, being developed by Intel. PIUMA provides several attractive features, including fast context switching, user-configurable caches, globally addressable memory, non-coherent caches, and asynchronous pipelines. We tailor our SpGEMM kernel to exploit many of the features of the PIUMA fabric. This thesis compares our SpGEMM implementation against prior solutions, all mapped to the PIUMA framework. We briefly describe some of the PIUMA architecture features and then delve into the details of our optimized SpGEMM kernel. Our SpGEMM kernel can achieve 9.4x speedup as compared to competing approaches.

This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy-loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described.

Migrating existing C programs into Rust is increasingly desired, as Rust offers superior memory safety while maintaining C's high performance. However, vastly different features between C and Rust--e.g., distinct definitions and usages of pointers and references--pose significant challenges beyond mere syntactic translation. Existing automated translation tools, such as C2Rust, may rely too much on syntactic, template-based translation and generate unsafe Rust code that is hard for human developers to read, maintain, or even compile. More semantic-aware translation that produces safer, idiomatic, and runnable Rust code is much needed. This paper introduces a novel dependency-guided and large language model (LLM)-based C-to-Rust translation approach, RustMap, based on three key ideas: (1) Utilize LLM capabilities to produce idiomatic Rust code from given small pieces of C code, (2) Mitigate LLM limitations in handling large codebases by breaking project-scale C programs into smaller units for translation according to their usage dependencies and composing them into a runnable Rust program, and (3) Enhance the correctness of the translated Rust program by using test cases to check input/output equivalence, isolate faulty code when execution states deviate, and iteratively refine the translation using feedback from compilation and test errors. We empirically evaluate RustMap on 126 real-world programs, including 125 from Rosetta Code and a 7000+ line bzip2 implementation using GPT-4o as the LLM. RustMap shows promising results, guiding GPT-4o to produce idiomatic, readable, and functional Rust code with significantly less unsafe code than other tools, and revealing non-trivial translation patterns reusable for future research.

Prompt caching in large language models (LLMs) results in data-dependent timing variations: cached prompts are processed faster than non-cached prompts. These timing differences introduce the risk of side-channel timing attacks. For example, if the cache is shared across users, an attacker could identify cached prompts from fast API response times to learn information about other users' prompts. Because prompt caching may cause privacy leakage, transparency around the caching policies of API providers is important. To this end, we develop and conduct statistical audits to detect prompt caching in real-world LLM API providers. We detect global cache sharing across users in seven API providers, including OpenAI, resulting in potential privacy leakage about users' prompts. Timing variations due to prompt caching can also result in leakage of information about model architecture. Namely, we find evidence that OpenAI's embedding model is a decoder-only Transformer, which was previously not publicly known.

Recent advances in language modeling have demonstrated the effectiveness of State Space Models (SSMs) for efficient sequence modeling. While hybrid architectures such as Samba and the decoder-decoder architecture, YOCO, have shown promising performance gains over Transformers, prior works have not investigated the efficiency potential of representation sharing between SSM layers. In this paper, we introduce the Gated Memory Unit (GMU), a simple yet effective mechanism for efficient memory sharing across layers. We apply it to create SambaY, a decoder-hybrid-decoder architecture that incorporates GMUs in the cross-decoder to share memory readout states from a Samba-based self-decoder. SambaY significantly enhances decoding efficiency, preserves linear pre-filling time complexity, and boosts long-context performance, all while eliminating the need for explicit positional encoding. Through extensive scaling experiments, we demonstrate that our model exhibits a significantly lower irreducible loss compared to a strong YOCO baseline, indicating superior performance scalability under large-scale compute regimes. Our largest model enhanced with Differential Attention, Phi4-mini-Flash-Reasoning, achieves significantly better performance than Phi4-mini-Reasoning on reasoning tasks such as Math500, AIME24/25, and GPQA Diamond without any reinforcement learning, while delivering up to 10x higher decoding throughput on 2K-length prompts with 32K generation length under the vLLM inference framework. We release our training codebase on open-source data at https://github.com/microsoft/ArchScale.

Multimodal agents repeatedly re-examine the same video frames, UI screenshots, and rendered artifacts as their context window slides and reasoning iterates, yet every look-back re-encodes from scratch, because prefix caches serve reuse only at a fixed leading position. We show this recompute is avoidable, and identify exactly what naive KV reuse loses: the cross-chunk conditioning a chunk absorbs from its neighbours. This loss is asymmetric. The direct readout of a cached chunk is recovered exactly and for free by the standard state-merge. What remains is a diffuse, low-rank residue concentrated in deep layers, invisible to single-hop retrieval but precisely what multi-hop reasoning binds on. Blind reuse therefore leaves single-hop recall intact while halving multi-hop accuracy; this is the failure mode prior position-independent caches, designed for single-context or single-image reuse, do not address. We repair it with a small, training-free low-rank conditioning patch stored alongside each position-free chunk. Reuse reduces to one operator across MLA, GQA, and MHA: exact RoPE re-rotation to any target position, plus the patch that restores cross-chunk binding. This makes three window operations cheap: reorder (one patch serves every ordering of a cached set), sliding-window survival (surviving chunks relocate via rotation only, zero re-encode), and recall (an evicted chunk is rehydrated by its patch, never re-encoded). A rank-m patch recovers full task accuracy on cross-chunk-binding benchmarks, MM-NIAH across two attention families and two-page doc-QA, at a fraction of the KV footprint, and reconstructs re-prefill KV to within bf16 rounding in a production SGLang kernel across six backbones. The conditioning signal is strongest in redundant vision and video streams, making our solution most impactful where multimodal agents spend their recompute budget.

The growing demand for efficient long-sequence modeling on edge devices has propelled widespread adoption of State Space Models (SSMs) like Mamba, due to their superior computational efficiency and scalability. As its autoregressive generation process remains memory-bound, speculative decoding has been proposed that incorporates draft model generation and target model verification. However, directly applying speculative decoding to SSMs faces three key challenges: (1) hidden state backtracking difficulties, (2) tree-based parallel verification incompatibility, and (3) hardware workload mismatch. To address these challenges, we propose SpecMamba, the first FPGA-based accelerator for Mamba with speculative decoding, which features system, algorithm, and hardware co-design. At the system level, we present a memory-aware hybrid backtracking strategy to coordinate both models. At the algorithm level, we propose first-in-first-out (FIFO)-based tree verification with tiling to minimize memory access. At the hardware level, we customize a dataflow that computes linear layers in parallel and SSM layers in series to enable maximal overlapping. Implemented on AMD FPGA platforms (VHK158 and VCK190), SpecMamba achieves a 2.27x speedup over GPU baselines and a 2.85x improvement compared to prior FPGA solutions, while demonstrating 5.41x and 1.26x higher energy efficiency, respectively.

The KV cache is a dominant memory bottleneck for LLM inference. While 4-bit KV quantization preserves accuracy, 2-bit often degrades it, especially on long-context reasoning. We close this gap via an algorithm-system co-design for mixed-precision KV caching: Kitty. On the algorithm side, extensive experiments show that Dynamic Channel-wise Precision Boost -- which ranks Key-cache channels by sensitivity and keeps only a small fraction at higher precision -- maintains near-zero loss in accuracy drop while approaching 2-bit memory. The main challenge is handling dynamic 4-bit channel boosts while keeping the page layout coalesced and the dequantization uniform, with no scattered reads or hard-coded masks. Kitty addresses these issues by decompose each mixed-precision Key page into two tensors with unified 2-bit precision. Based on this, Kitty provides a page-centric KV layout, Triton-compatible page dequantization kernels, and a lightweight runtime pipeline that preserves coalescing and avoids divergence. Across seven tasks and two model families (Qwen3, LLaMA3), Kitty cuts KV memory by nearly 8x with negligible accuracy loss, enabling up to 8x larger batches and 2.1x-4.1x higher throughput under the same memory budget. We release the full implementation of Kitty at https://github.com/Summer-Summer/Kitty.

Fault-tolerant quantum computing is essential for realizing the substantial computational speedups that quantum computing can bring, but it requires real-time error decoding with high performance. Speculative window decoding improves performance by reducing the time spent waiting for dependencies from prior decoding windows. However, speculative decoders have only been evaluated under the regime of superconducting qubits with fast gate speeds, surface codes, and matching decoders. Since different quantum technologies can have slower gate speeds, we evaluate the performance of speculative decoding under slow gate speeds. We also examine its sensitivity to speculation accuracy, decoder latency, processor count, and workload parallelism, which can vary across different quantum error correction codes, decoders, and hardware platforms. This work presents design principles for identifying when speculative decoding yields the greatest performance improvements. It also reveals the conditions under which non-speculative decoders outperform speculative decoders.

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

Diffusion Large Language Models (dLLMs) offer fast, parallel token generation, but their standalone use is plagued by an inherent efficiency-quality tradeoff. We show that, if carefully applied, the attributes of dLLMs can actually be a strength for drafters in speculative decoding with autoregressive (AR) verifiers. Our core insight is that dLLM's speed from parallel decoding drastically lowers the risk of costly rejections, providing a practical mechanism to effectively realize the (elusive) lengthy drafts that lead to large speedups with speculative decoding. We present FailFast, a dLLM-based speculative decoding framework that realizes this approach by dynamically adapting its speculation length. It "fails fast" by spending minimal compute in hard-to-speculate regions to shrink speculation latency and "wins big" by aggressively extending draft lengths in easier regions to reduce verification latency (in many cases, speculating and accepting 70 tokens at a time!). Without any fine-tuning, FailFast delivers lossless acceleration of AR LLMs and achieves up to 4.9times speedup over vanilla decoding, 1.7times over the best naive dLLM drafter, and 1.4times over EAGLE-3 across diverse models and workloads. We open-source FailFast at https://github.com/ruipeterpan/failfast.

Lookup-based memory has been a promising way to scale the parameters of large language models (LLMs). It retrieves learned representations of local token patterns, such as n-grams, instead of reconstructing them through successive layers of computation. However, existing designs such as Engram treat each retrieved embedding as a monolithic unit. Each embedding is stored in its own hashed slot and modulated by a single scalar gate. As a result, polysemous patterns cannot selectively read out the components of their memory that are relevant to the context. Moreover, parameters are shared only through hash collisions, which are largely unrelated to semantics. We propose FactorEngram, a factorized n-gram memory with basis-level contextual gating. FactorEngram retrieves sparsity-regularized coefficients over a dictionary of basis vectors shared across patterns, so related patterns can reuse common components. The same dictionary is also used for gating. The backbone hidden state is scored against each basis vector to gate the corresponding coefficient before reconstruction, which lets the context modulate each memory component individually. FactorEngram also covers both individual tokens and multi-token n-grams, and we systematically study where the memory branch should be inserted. On 340M- and 1B-parameter Transformer backbones, FactorEngram improves language modeling and downstream task performance. Ablation studies confirm the contribution of each component and identify insertion before the attention sublayer in the middle layers as an effective configuration.

Heap-based exploits that leverage memory management errors continue to pose a significant threat to application security. The root cause of these vulnerabilities are the memory management errors within the applications, however various hardened allocator designs have been proposed as mitigation. A common feature of these designs is the strategic decision to store heap metadata separately from the application data in use, thereby reducing the risk of metadata corruption leading to security breaches. Despite their potential benefits, hardened allocators have not been widely adopted in real-world applications. The primary barrier to their adoption is the performance overheads they introduce. These overheads can negatively impact the efficiency and speed of applications, which is a critical consideration for developers and system administrators. Having learned from previous implementations, we developed SJMalloc, a general-purpose, high-performance allocator that addresses these concerns. SJMalloc stores its metadata out-of-band, away from the application's data on the heap. This design choice not only enhances security but also improves performance. Across a variety of real-world workloads, SJMalloc demonstrates a ~6% performance improvement compared to GLibcs allocator, while using only ~5% more memory. Furthermore, SJMalloc successfully passes the generic elements of the GLibc malloc testsuite and can thus be used as a drop-in replacement for the standard allocator, offering an easy upgrade path for enhanced security and performance without requiring changes to existing applications.

Rapid advancement of machine learning solutions has often coincided with the production of a test public data set. Such datasets reduce the largest barrier to entry for tackling a problem -- procuring data -- while also providing a benchmark to compare different solutions. Furthermore, large datasets have been used to train high-performing feature finders which are then used in new approaches to problems beyond that initially defined. In order to encourage the rapid development in the analysis of data collected using liquid argon time projection chambers, a class of particle detectors used in high energy physics experiments, we have produced the PILArNet, first 2D and 3D open dataset to be used for a couple of key analysis tasks. The initial dataset presented in this paper contains 300,000 samples simulated and recorded in three different volume sizes. The dataset is stored efficiently in sparse 2D and 3D matrix format with auxiliary information about simulated particles in the volume, and is made available for public research use. In this paper we describe the dataset, tasks, and the method used to procure the sample.

Decoders for quantum error correction (QEC) experiments rely on detector error models (DEMs), which encode, for each error, its probability and the detectors and logical observables it flips. Here we show that estimating DEM event probabilities from experimental syndromes is feasible, avoids independent device benchmarking, and produces useful decoder priors for estimating and reducing decoded logical error probabilities. We evaluate our methods using open-source data from surface-code memory experiments performed on Google's Willow chip, and we carry out analogous surface-code experiments on IBM's ibm\_miami processor. Despite the different physical error scales of the Google and IBM devices, in both cases our estimated DEMs improve logical error probabilities relative to baseline device-informed DEMs, typically at the 5%-10% level and with larger gains in some IBM cases, without additional calibration circuits, decoder fine-tuning, or supervised fitting to logical outcomes.

Linear attention has recently gained significant attention for long-context inference due to its constant decoding cost with respect to context length. However, existing serving systems typically serve linear attention by recurrently computing and updating a large linear attention state in every decoding step. Since the state is much larger than the per-token key and value, recurrent decoding incurs substantial memory access and becomes inefficient for serving linear attention. In this paper, we propose KVBuffer, an IO-aware serving mechanism for linear attention. By buffering recent keys and values, KVBuffer enables serving systems to compute linear attention outputs in more flexible and memory-efficient ways. For decoding, KVBuffer enables chunkwise computation, which reduces average memory access and decoding latency by deferring state updates and applying them in batch. For speculative decoding, KVBuffer verifies draft tokens in parallel and avoids storing temporary states. For short contexts, KVBuffer computes attention outputs directly from buffered keys and values, without creating or updating the linear attention state. We implement KVBuffer in SGLang for Qwen3-Next. Our evaluations show that KVBuffer can reduce linear attention decoding latency by up to 45.17% and increase the maximum number of serving requests by 5x for speculative decoding when verifying four draft tokens.

Recent experimental results in B physics from Belle, BaBar and LHCb suggest new physics (NP) in the weak bto c charged-current and the bto s neutral-current processes. Here we focus on the charged-current case and specifically on the decay modes Bto D^{*+}ell^- barν with ell = e, μ, and τ. The world averages of the ratios R_D and R_D^{*} currently differ from the Standard Model (SM) by 3.4σ while ΔA_{FB} = A_{FB}(Bto D^{*} μν) - A_{FB} (Bto D^{*} e ν) is found to be 4.1σ away from the SM prediction in an analysis of 2019 Belle data. These intriguing results suggest an urgent need for improved simulation and analysis techniques in Bto D^{*+}ell^- barν decays. Here we describe a Monte Carlo Event-generator tool based on EVTGEN developed to allow simulation of the NP signatures in Bto D^*ell^- ν, which arise due to the interference between the SM and NP amplitudes. As a demonstration of the proposed approach, we exhibit some examples of NP couplings that are consistent with current data and could explain the ΔA_{FB} anomaly in Bto D^*ell^- ν while remaining consistent with other constraints. We show that the Δ-type observables such as ΔA_{FB} and ΔS_5 eliminate most QCD uncertainties from form factors and allow for clean measurements of NP. We introduce correlated observables that improve the sensitivity to NP. We discuss prospects for improved observables sensitive to NP couplings with the expected 50 ab^{-1} of Belle II data, which seems to be ideally suited for this class of measurements.

Existing routers rely on semantic query features or handcrafted features, which often fail to capture model-specific failures or intrinsic task difficulty. We instead route using internal LLM activations, specifically the residual stream. Our key idea, Encoder-Target Decoupling, separates the model that produces the predictive signal (the Encoder) from the model whose correctness is being estimated (the Target), allowing open-weight encoders to predict the performance of closed-source target models. We evaluate layerwise geometric probes, finding that Fisher Separability (J) effectively identifies informative layers, supported by Effective Dimensionality (d_{eff}) diagnostics. We then utilize a SharedTrunkNet, a joint multi-output MLP that predicts simultaneous correctness probabilities across candidate models using concatenated prefill features. In our experiments, SharedTrunkNet consistently outperforms semantic baselines. At its best, SharedTrunkNet closes 45.58% of the gap between the strongest standalone model and the oracle while achieving 74.31% cost savings relative to the most expensive model. These results demonstrate that prefill activations provide a robust routing signal, establishing activation-based routing as a high-performance alternative to purely semantic selection.

The large size of the KV cache has become a major bottleneck for serving LLMs with increasing context lengths. In response, many KV cache compression methods, such as token dropping and quantization, have been proposed. However, almost all of these methods are inherently lossy-despite minimal accuracy degradation for short outputs, their outputs increasingly diverge from full-KV-cache outputs as more tokens are decoded, which leads to catastrophic failures in code generation and tool calling. We present VeriCache, the first inference framework that ensures the same output as full-KV-cache decoding but largely preserves the high decoding throughput of a range of KV cache compression algorithms. VeriCache uses the compressed KV cache to draft tokens, then verifies them against the full KV cache. While it may seem like just speculative decoding, VeriCache requires addressing a key system challenge to work-keeping the full KV cache out of GPU memory and minimizing the overhead of swapping it in for verification. The insight is two-fold: (1) compressed-KV decoding can be parallelized with full-KV swap, because one is HBM-bandwidth-bound and the other is PCIe/network-bound, and (2) the compressed KV cache often produces output similar to the full KV cache, allowing a long drafting horizon to amortize each full-KV swap. VeriCache applies to both long-context decoding and remote prefix caching, supports a broad family of token-dropping and quantization methods through a uniform compressor interface, and composes with traditional speculative decoding. Experimental results show that VeriCache achieves up to 4X higher throughput than full-KV inference while producing identical outputs.

The transition from x86 to ARM architecture is becoming increasingly common across various domains, primarily driven by ARM's energy efficiency and improved performance across traditional sectors. However, this ISA shift poses significant challenges, mainly due to the extensive legacy ecosystem of x86 software and lack of portability across proprietary ecosystems and software stacks. This paper introduces CRT, a lightweight LLM-based transpiler that automatically converts x86 assembly to ARM assembly. Our approach bridges the fundamental architectural gap between x86's CISC-based and ARM's RISC-based computing paradigms while preserving program semantics and optimizing performance. We evaluate CRT on diverse real-world applications, achieving 79.25% translation accuracy from x86 to ARMv5 on our comprehensive test suite, and an 88.68% accuracy from x86 to RISC-V. In practical deployments on Apple M2 hardware (ARMv8), our transpiled code achieves 1.73times speedup compared to Apple's Rosetta 2 virtualization engine, while delivering 2.41times memory efficiency and 1.47times better energy consumption. Through testing and analysis, we show that CRT successfully navigates the CISC/RISC divide and generates correctly executable RISC code despite machine ``language'' barriers. We release our code, models, training datasets, and benchmarks at: https://ahmedheakl.github.io/asm2asm/.

Memory is essential for enabling large language models to support long-horizon reasoning, yet existing memory systems remain unreliable and difficult to debug. Tracing memory's dynamic evolution is crucial to understand how information is synthesized, propagated, or corrupted over time. In this work, we study the new problem of error tracing and attribution in LLM memory systems. We propose a novel framework that transforms memory pipelines into executable memory evolution graphs, enabling fine-grained tracing of operational information flow. We then construct MemTraceBench, a benchmark collected from representative memory systems such as Long-Context, RAG, Mem0, and EverMemOS, to systematically study memory failure modes. We further introduce an automatic attribution method that iteratively traces operation subgraphs to pinpoint the root cause of any failed case. Our analysis reveals that memory failures are systematic, stemming from operation-level issues like information loss and retrieval misalignment. Crucially, we leverage these fine-grained attribution signals to guide downstream prompt optimization, establishing a closed-loop system that automatically corrects faults and boosts end-task performance by up to 7.62%. Code will be released at https://github.com/zjunlp/MemTrace.

Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.

Deploying large language models in user-facing systems requires efficient output safety filtering. Existing approaches typically rely on a separate moderation model applied after generation, which doubles inference cost and only detects violations after generation completes. We observe that the signal needed for moderation is already present in the model hidden states. Based on this, we train lightweight token-level probes that operate directly on internal activations, producing per-token safety scores that can be aggregated for both offline evaluation and online intervention. The probe reuses activations from the generator and requires no additional forward pass, enabling sub millisecond per-token safety checks inside the decoding loop. A probe applied to a single mid layer recovers most decisions of a strong guard model, acting as a low cost surrogate optimized for latency rather than accuracy. In streaming settings, it can halt or modify unsafe outputs before they are fully generated, replacing end of sequence moderation with continuous token level monitoring. Compared to post hoc and streaming guard models, our method achieves orders of magnitude lower compute overhead with minimal latency cost. We also provide a practical deployment recipe, including layer selection, aggregation strategy, probing frequency, and triggering thresholds. Finally, we show that the probe linear component corresponds to a direction in residual space, enabling both detection and activation steering at negligible cost.

We study the prepare-and-measure scenario in which Alice transmits a quantum system to Bob, who then performs a quantum measurement. The quantum state of the system is unknown to Bob, and the measurement is unknown to Alice. It has recently been shown that shared randomness and two bits of classical communication are necessary and sufficient to simulate the transmission of a qubit. We show that the communication cost can be reduced to an average of 1.89 bits. We then study restricted sets of state preparations: First, for a restriction to real-valued qubit states, if the communication of a classical trit is sufficient, we show that the corresponding protocol must have a convoluted form. We then reduce the smallest qubit scenario requiring two bits of classical communication to only 6 state preparations and 5 measurements. For a qutrit, it is not known whether the communication cost is finite; we identify a scenario that requires at least 5 classical messages, already for the simulation of the real qutrit. Finally, we develop a method for restricted sets of states, that allows us to lower bound the classical communication cost based solely on the set of quantum states.

An open-source C++ framework for discovering fast matrix multiplication schemes using the flip graph approach is presented. The framework supports multiple coefficient rings -- binary (Z_2), modular ternary (Z_3) and integer ternary (Z_T = {-1,0,1}) -- and implements both fixed-dimension and meta-dimensional search operators. Using efficient bit-level encoding of coefficient vectors and OpenMP parallelism, the tools enable large-scale exploration on commodity hardware. The study covers 680 schemes ranging from (2 times 2 times 2) to (16 times 16 times 16), with 276 schemes now in Z_T coefficients and 117 in integer coefficients. With this framework, the multiplicative complexity (rank) is improved for 79 matrix multiplication schemes. Notably, a new 4 times 4 times 10 scheme requiring only 115 multiplications is discovered, achieving ωapprox 2.80478 and beating Strassen's exponent for this specific size. Additionally, 93 schemes are rediscovered in ternary coefficients that were previously known only over rationals or integers, and 68 schemes in integer coefficients that previously required fractions. All tools and discovered schemes are made publicly available to enable reproducible research.

We introduce a technique that uses gauge fixing to significantly improve the quantum error correcting performance of subsystem codes. By changing the order in which check operators are measured, valuable additional information can be gained, and we introduce a new method for decoding which uses this information to improve performance. Applied to the subsystem toric code with three-qubit check operators, we increase the threshold under circuit-level depolarising noise from 0.67% to 0.81%. The threshold increases further under a circuit-level noise model with small finite bias, up to 2.22% for infinite bias. Furthermore, we construct families of finite-rate subsystem LDPC codes with three-qubit check operators and optimal-depth parity-check measurement schedules. To the best of our knowledge, these finite-rate subsystem codes outperform all known codes at circuit-level depolarising error rates as high as 0.2%, where they have a qubit overhead that is 4.3times lower than the most efficient version of the surface code and 5.1times lower than the subsystem toric code. Their threshold and pseudo-threshold exceeds 0.42% for circuit-level depolarising noise, increasing to 2.4% under infinite bias using gauge fixing.

To mitigate the Memory Wall bottleneck encountered by Large Language Models (LLMs) during inference on NPU hardware, and addressing the scarcity of native support for mainstream speculative decoding algorithms on domestic infrastructure, this study presents an end-to-end speculative inference acceleration scheme for OpenPangu-7B.

As large language models gain widespread adoption, running them efficiently becomes crucial. Recent works on LLM inference use speculative decoding to achieve extreme speedups. However, most of these works implicitly design their algorithms for high-end datacenter hardware. In this work, we ask the opposite question: how fast can we run LLMs on consumer machines? Consumer GPUs can no longer fit the largest available models (50B+ parameters) and must offload them to RAM or SSD. When running with offloaded parameters, the inference engine can process batches of hundreds or thousands of tokens at the same time as just one token, making it a natural fit for speculative decoding. We propose SpecExec (Speculative Execution), a simple parallel decoding method that can generate up to 20 tokens per target model iteration for popular LLM families. It utilizes the high spikiness of the token probabilities distribution in modern LLMs and a high degree of alignment between model output probabilities. SpecExec takes the most probable tokens continuation from the draft model to build a "cache" tree for the target model, which then gets validated in a single pass. Using SpecExec, we demonstrate inference of 50B+ parameter LLMs on consumer GPUs with RAM offloading at 4-6 tokens per second with 4-bit quantization or 2-3 tokens per second with 16-bit weights.

Large Language Models (LLMs) offer powerful capabilities in code generation, natural language understanding, and domain-specific reasoning. Their application to quantum software development remains limited, in part because of the lack of high-quality datasets both for LLM training and as dependable knowledge sources. To bridge this gap, we introduce PennyLang, an off-the-shelf, high-quality dataset of 3,347 PennyLane-specific quantum code samples with contextual descriptions, curated from textbooks, official documentation, and open-source repositories. Our contributions are threefold: (1) the creation and open-source release of PennyLang, a purpose-built dataset for quantum programming with PennyLane; (2) a framework for automated quantum code dataset construction that systematizes curation, annotation, and formatting to maximize downstream LLM usability; and (3) a baseline evaluation of the dataset across multiple open-source and commercial models, including ablation studies, all conducted within a retrieval-augmented generation (RAG) pipeline. Using PennyLang with RAG substantially improves performance: for example, Qwen 7B's success rate rises from 8.7% without retrieval to 41.7% with full-context augmentation, and LLaMa 4 improves from 78.8% to 84.8%, while also reducing hallucinations and enhancing quantum code correctness. Moving beyond Qiskit-focused studies, we bring LLM-based tools and reproducible methods to PennyLane for advancing AI-assisted quantum development.

We introduce qclab++, a light-weight, fully-templated C++ package for GPU-accelerated quantum circuit simulations. The code offers a high degree of portability as it has no external dependencies and the GPU kernels are generated through OpenMP offloading. qclab++ is designed for performance and numerical stability through highly optimized gate simulation algorithms for 1-qubit, controlled 1-qubit, and 2-qubit gates. Furthermore, we also introduce qclab, a quantum circuit toolbox for Matlab with a syntax that mimics qclab++. This provides users the flexibility and ease of use of a scripting language like Matlab for studying their quantum algorithms, while offering high-performance GPU acceleration when required. As such, the qclab++ library offers a unique combination of features. We compare the CPU simulator in qclab++ with the GPU kernels generated by OpenMP and observe a speedup of over 40times. Furthermore, we also compare qclab++ to other circuit simulation packages, such as cirq-qsim and qibo, in a series of benchmarks conducted on NERSC's Perlmutter system and illustrate its competitiveness.

Despite the effort in vulnerability detection over the last two decades, memory safety vulnerabilities continue to be a critical problem. Recent reports suggest that the key solution is to migrate to memory-safe languages. To this end, C-to-Rust transpilation becomes popular to resolve memory-safety issues in C programs. Recent works propose C-to-Rust transpilation frameworks; however, a comprehensive evaluation dataset is missing. Although one solution is to put together a large enough dataset, this increases the analysis time in automated frameworks as well as in manual efforts for some cases. In this work, we build a method to select functions from a large set to construct a minimized yet representative dataset to evaluate the C-to-Rust transpilation. We propose C2RUST-BENCH that contains 2,905 functions, which are representative of C-to-Rust transpilation, selected from 15,503 functions of real-world programs.

Using the CLEO-c detector at the Cornell Electron Storage Ring, we have measured inclusive and exclusive cross sections for the production of D+, D0 and Ds+ mesons in e+e- annihilations at thirteen center-of-mass energies between 3.97 and 4.26 GeV. Exclusive cross sections are presented for final states consisting of two charm mesons (DD, D*D, D*D*, Ds+Ds-, Ds*+Ds-, and Ds*+Ds*-) and for processes in which the charm-meson pair is accompanied by a pion. No enhancement in any final state is observed at the energy of the Y(4260).

GUI agents must remember both useful experience from earlier tasks and unfinished progress in the current interaction. Latent memory offers a compact solution by compressing multimodal trajectories into a few continuous tokens. Existing methods, however, usually map each trajectory to one fixed memory block and train it mainly through next-action supervision. This creates three practical problems: important details may be lost during compression, the same memory block must serve different decision stages, and irrelevant retrieved trajectories may still mislead the agent. We introduce FocusMem, which separates these responsibilities within a compact latent-memory interface. A role-aware content basis encourages episodic memory to retain reusable experience and working memory to retain task progress. A state-conditioned readout generates a decision-specific view of the same stored evidence, while a lightweight trust gate can suppress memory blocks that appear irrelevant to the current step. All components are trained while the GUI policy remains frozen. Across five GUI-agent benchmarks, FocusMem consistently outperforms a fully matched action-only fixed-memory baseline and prior latent memory adaptations. Further analysis shows that semantic and functional supervision preserve complementary information, state-conditioned readout is more robust as surrounding trajectory context grows, and the trust gate reduces the harm caused by injected irrelevant episodic evidence. These results show that effective latent memory depends not only on compressing past interaction, but also on what is retained, what is exposed, and what is allowed.

We propose LGGPT, an LLM-based model tailored for unified layout generation. First, we propose Arbitrary Layout Instruction (ALI) and Universal Layout Response (ULR) as the uniform I/O template. ALI accommodates arbitrary layout generation task inputs across multiple layout domains, enabling LGGPT to unify both task-generic and domain-generic layout generation hitherto unexplored. Collectively, ALI and ULR boast a succinct structure that forgoes superfluous tokens typically found in existing HTML-based formats, facilitating efficient instruction tuning and boosting unified generation performance. In addition, we propose an Interval Quantization Encoding (IQE) strategy that compresses ALI into a more condensed structure. IQE precisely preserves valid layout clues while eliminating the less informative placeholders, facilitating LGGPT to capture complex and variable layout generation conditions during the unified training process. Experimental results demonstrate that LGGPT achieves superior or on par performance compared to existing methods. Notably, LGGPT strikes a prominent balance between proficiency and efficiency with a compact 1.5B parameter LLM, which beats prior 7B or 175B models even in the most extensive and challenging unified scenario. Furthermore, we underscore the necessity of employing LLMs for unified layout generation and suggest that 1.5B could be an optimal parameter size by comparing LLMs of varying scales. Code is available at https://github.com/NiceRingNode/LGGPT.

We present a data acquisition~(DAQ) software based on the MIDAS framework, specifically for gaseous detectors to support the detector deployments and applications. It implements a comprehensive suite of functions, including parameter configuration, data acquisition, decoding, and storage, alongside web-based operation and real-time monitoring capabilities. We establish a fully unified workflow spanning data acquisition to offline analysis, enabling real-time visualization of signal waveforms and energy spectra. The system has been successfully deployed in the PandaX-III experiment, which utilized a high-pressure gaseous detector to search for neutrinoless double beta decay. Its performance and stability have been validated through tests involving two distinct electronics setups and joint commissioning with the detector.

The study of CP violation in hyperon transitions has a long history. In the early 2000s the HyperCP experiment made a major effort to seek CP-odd signals in the decay sequence Xi^-toLambda pi^- and Lambdato ppi^-, which motivated more searches. Most recently the BESIII and LHCb Collaborations have acquired or improved the upper bounds on CP violation in a variety of hyperon nonleptonic processes, including Sigma^+to npi^+ and Sigma^+to ppi^0. These measurements have not reached the standard-model level yet, but have stimulated a renewed interest in CP-violating new physics in strange-quark decay beyond what is constrained by the parameters varepsilon and varepsilon^prime from the kaon sector. In this paper, after updating the standard-model expectations for CP-odd observables in the modes Sigma^pmto Npi, we revisit new-physics scenarios that could enhance the corresponding quantities in Lambdato Npi and XitoLambdapi and apply them to the Sigma^pm modes. We find that the CP asymmetries in the latter can be significantly increased over the standard-model expectations, at levels which may be tested in the ongoing BESIII experiment and in future endeavors such as PANDA and the Super Tau Charm Facility.

A long-horizon agent's trace outgrows both of its consumers: the human observer monitoring the run, and the agent itself, whose bounded context the trace must be folded back into. We present a live trace model, an append-only event ledger folded incrementally into typed run state and compiled into per-consumer views, and evaluate it for both consumers against deterministic ground truth. For the observer side, evaluated with an LLM reader as proxy, the compiled view answers monitoring questions using approximately 14x and 15x fewer input tokens (by reader) and at 5-7x lower cost than a budget-capped single-call reading of the raw trace, with higher accuracy (0.85-0.87 versus 0.48). Because the questions were co-designed with the view schema, we treat the token and cost reduction, conditional on schema coverage, as the transferable result. For the agent, on 120-link sequential-dependency tasks, mechanisms that maintain the task's running statistic in per-step state succeed where full-context prompting fails (30/30 versus 8/30 under a clean protocol, n=30, labeled descriptive owing to benchmark-system co-development); a prompt-level scratchpad matches the fold's accuracy at lower cost, and a two-arm decomposition attributes the fold's accuracy to its deterministic aggregate and its cost advantage to its compactness. The fold's remaining value over cheaper alternatives is deterministic auditability and serving the observer from the same state. We derive eleven candidate requirements for trace folding from observed failures and delimit them with an order-sensitive task family on which the fold ceases to help. Code, benchmarks, a regenerable synthetic corpus, and all workbench traces are released.

We introduce maximum likelihood fragment tomography (MLFT) as an improved circuit cutting technique for running clustered quantum circuits on quantum devices with a limited number of qubits. In addition to minimizing the classical computing overhead of circuit cutting methods, MLFT finds the most likely probability distribution for the output of a quantum circuit, given the measurement data obtained from the circuit's fragments. We demonstrate the benefits of MLFT for accurately estimating the output of a fragmented quantum circuit with numerical experiments on random unitary circuits. Finally, we show that circuit cutting can estimate the output of a clustered circuit with higher fidelity than full circuit execution, thereby motivating the use of circuit cutting as a standard tool for running clustered circuits on quantum hardware.

We propose and experimentally demonstrate sequential quantum computing (SQC), a paradigm that utilizes multiple homogeneous or heterogeneous quantum processors in hybrid classical-quantum workflows. In this manner, we are able to overcome the limitations of each type of quantum computer by combining their complementary strengths. Current quantum devices, including analog quantum annealers and digital quantum processors, offer distinct advantages, yet face significant practical constraints when individually used. SQC addresses this by efficient inter-processor transfer of information through bias fields. Consequently, measurement outcomes from one quantum processor are encoded in the initial-state preparation of the subsequent quantum computer. We experimentally validate SQC by solving a combinatorial optimization problem with interactions up to three-body terms. A D-Wave quantum annealer utilizing 678 qubits approximately solves the problem, and an IBM's 156-qubit digital quantum processor subsequently refines the obtained solutions. This is possible via the digital introduction of non-stoquastic counterdiabatic terms unavailable to the analog quantum annealer. The experiment shows a substantial reduction in computational resources and improvement in the quality of the solution compared to the standalone operations of the individual quantum processors. These results highlight SQC as a powerful and versatile approach for addressing complex combinatorial optimization problems, with potential applications in quantum simulation of many-body systems, quantum chemistry, among others.

Existing checkpointing approaches seem ill-suited for distributed training even though hardware limitations make model parallelism, i.e., sharding model state across multiple accelerators, a requirement for model scaling. Consolidating distributed model state into a single checkpoint unacceptably slows down training, and is impractical at extreme scales. Distributed checkpoints, in contrast, are tightly coupled to the model parallelism and hardware configurations of the training run, and thus unusable on different configurations. To address this problem, we propose Universal Checkpointing, a technique that enables efficient checkpoint creation while providing the flexibility of resuming on arbitrary parallelism strategy and hardware configurations. Universal Checkpointing unlocks unprecedented capabilities for large-scale training such as improved resilience to hardware failures through continued training on remaining healthy hardware, and reduced training time through opportunistic exploitation of elastic capacity. The key insight of Universal Checkpointing is the selection of the optimal representation in each phase of the checkpointing life cycle: distributed representation for saving, and consolidated representation for loading. This is achieved using two key mechanisms. First, the universal checkpoint format, which consists of a consolidated representation of each model parameter and metadata for mapping parameter fragments into training ranks of arbitrary model-parallelism configuration. Second, the universal checkpoint language, a simple but powerful specification language for converting distributed checkpoints into the universal checkpoint format. Our evaluation demonstrates the effectiveness and generality of Universal Checkpointing on state-of-the-art model architectures and a wide range of parallelism techniques.

Speculative decoding has emerged as a pivotal technique to accelerate LLM inference by employing a lightweight draft model to generate candidate tokens that are subsequently verified by the target model in parallel. However, while this paradigm successfully increases the arithmetic intensity of memory-bound inference, it causes significant compute inefficiency: the majority of draft tokens fail verification and are discarded, resulting in waste of computation. Motivated by the goal of recollecting this wasted computation, we propose a novel system that transforms discarded drafts into reusable tokens. Our key insight is to perform auto-regressive prediction at the hidden states level and postpone the integrating token information after the hidden states generation, so the draft hidden states are not contaminated by incorrect tokens, enabling hidden state reuse. To implement such a system, first we introduce a draft model architecture based on auto-regressive hidden states, which preserves richer semantics than token-based drafters to facilitate draft repurposing. Second, we design an efficient token information injection mechanism that leverages our specialized draft model to construct high-quality draft token trees and enables resampling tokens from verification failures. Third, we eliminate the overhead hidden in our design to further maximize hardware utilization. We conducted extensive evaluations against various baselines, demonstrating up to a 3.3x speedup against standard speculative decoding.

Recent attacks show that behavioural unlearning of large language models leaves internal traces recoverable by adversarial probes. We characterise where this retention lives and show it can be surgically removed without measurable capability cost. Our central protocol is a leave-one-out cross-sequence probe that tests whether a memorisation signature generalises across held-out sequences. The signature is real and consistent across scale: memorisation-specific gaps of +0.32, +0.19, +0.30 on Pythia-70M, GPT-2 medium, and Mistral-7B; on Pythia-70M, the random-initialisation control collapses to -0.04 at the deepest layer where the pretrained signature peaks. The probe direction is causally separable from recall -- projecting it out collapses the signature locally (+0.44 -> -0.19) while behavioural recall barely changes -- and a probe trained on naturally memorised content does not classify fine-tuning-injected secrets, marking two representationally distinct regimes. We then introduce probe-geometry alignment (PGA), a surgical erasure that aligns activations along the probe's live readout direction at each depth. PGA drives the cross-sequence probe below random chance at all four scales tested (toy depth-4: 0.17; Pythia-70M: 0.07; Mistral-7B: 0.45; GPT-2 medium: 0.06 via MD-PGA k=2) and remains robust to six adversarial probe variants. Against a re-fitting attacker who trains a fresh probe on PGA-treated activations, we extend PGA adversarially, defeating the re-fit probe at every memorisation-relevant depth while preserving five zero-shot capability benchmarks within 2.8 percentage points per task (mean Δacc = +0.2pp). The cross-sequence signature is a real, causally separable, regime-specific property of pretrained representations -- removable below chance with a single rank-one intervention per depth at no measurable capability cost.

Classical methods to simulate quantum systems are not only a key element of the physicist's toolkit for studying many-body models but are also increasingly important for verifying and challenging upcoming quantum computers. Pauli propagation has recently emerged as a promising new family of classical algorithms for simulating digital quantum systems. Here we provide a comprehensive account of Pauli propagation, tracing its algorithmic structure from its bit-level implementation and formulation as a tree-search problem, all the way to its high-level user applications for simulating quantum circuits and dynamics. Utilising these observations, we present PauliPropagation.jl, a Julia software package that can perform rapid Pauli propagation simulation straight out-of-the-box and can be used more generally as a building block for novel simulation algorithms.