Daily Papers

Retrieval-augmented generation commonly serves separate models for reranking and answering, duplicating model residency and passage processing. We introduce Glance, which equips the generator with a lightweight decision adapter and pointer head to score candidate passages from a shared prefill. Short relevance probes branch from the cached context, producing one score per passage without separately prefilling each query-passage pair. A single resident 9B backbone supports generation, general decisions and reranking, with approximately 0.1 GiB of additional memory per decision skill. After 39 minutes of MS MARCO fine-tuning, Glance achieves nDCG@10 of 0.741 on SciFact and 0.345 on NFCorpus, compared with 0.721 and 0.326 for bge-reranker-v2-m3. On 300 HotpotQA questions, its selected context improves answer F1 by 0.045 over cross-encoder-selected context under the same base generator (paired bootstrap 95% CI [0.014, 0.076]). In a scaling study, reranking quality keeps rising up to 200 candidates (43k tokens) scored from one shared prefill, where it exceeds the cross-encoder by 0.058 nDCG@10, and a probe-only activated adapter lets generation continue from the original passage cache. These initial results demonstrate generator-based reranking with one resident backbone; evaluation currently covers two retrieval datasets, one QA dataset and one backbone family.

A common small-model deployment runs one shared backbone with several LoRA specialists that answer over the same context. Serving them naively re-prefills that shared context once per specialist. We study a narrow, practical question: for already-trained standard LoRA adapters -- not adapters retrained for cache compatibility -- how much task quality is preserved if the backbone's prefill KV cache is computed once and reused across specialists, and what does that buy in serving cost? On a Qwen3-1.7B backbone with two adapters (extractive QA on HotpotQA, arithmetic reasoning on GSM8K), we sweep the boundary at which the specialist takes over from the reused base cache and measure paired quality differences and serving cost. Full-prefix reuse had the lowest prefill cost and a small quality difference on held-out GSM8K (Delta = -4.6 EM at a 160-token budget; -3.0 at 320 tokens; -0.8 under a second training seed -- all favoring native, only the first excluding zero, and the magnitude not consistent). Partial recomputation provided no demonstrated advantage. Neither quality equivalence nor a general boundary-selection rule is established. We also report a closed-form ridge KV translator that did not beat direct reuse, and specialist-dependence contrasts whose intervals all include zero. The measured serving benefit is warm-cache time-to-first-token, which grows with context (~16x at 8K); two-branch peak memory was only 12% lower and, on inspection, the prefix was never physically shared across branches -- this implementation reuses KV values but copies their storage, so shared-cache memory savings are not achieved.

Recent multi-agent LLM systems increasingly combine heterogeneous models for specialized agent roles. However, text-based communication requires each receiver to prefill shared context already processed by the sender. Reusing the sender's key-value (KV) cache avoids this redundancy, but prefill-free transfer across model families must handle differences in tokenization, model depth, and KV representations. To address these issues, we propose HeteroFold, a prefill-free cross-family KV cache transfer method that keeps both the sender and receiver frozen. HeteroFold aligns model structures, maps the sender cache into the receiver space, and calibrates it to preserve receiver behavior. Across six transfer directions, HeteroFold achieves the best cache-transfer performance on all four long-context benchmarks and most short-context settings. It also matches text-based communication on the multi-agent benchmark. At 32K context length, Llama-3.1-8BrightarrowMinistral-3-14B transfer is 10.7times faster than Native Prefill and 1.18--1.47times faster than the state-of-the-art prefill-free baselines, Dense Latent and KV Ridge. These results show that HeteroFold enables efficient cross-family KV reuse without receiver prefill.

Embodied AI agents increasingly require parallel execution of multiple tasks, such as manipulation, conversation, and memory construction, from shared observations under distinct time constraints. Recent Mixture-of-Transformers (MoT) Vision-Language-Action Models (VLAs) architecturally support such heterogeneous outputs, yet existing inference systems fail to achieve efficient multi-task parallelism for on-device deployment because of redundant computation and resource contention. We identify isolated KV cache management as the root cause. To address this, we propose unified KV cache management, an inference design that treats the KV cache as a first-class shared resource across tasks and over time. This abstraction enables two key optimizations: cross-task KV sharing eliminates redundant prefill of shared observations, while cross-frame continuous batching decouples variable-length language decoding from fixed-rate action generation across control cycles. We implement this design for π_{0.5}, a popular MoT VLA, and evaluate it on both NVIDIA GeForce RTX 4090 and Jetson AGX Thor, two representative platforms for on-device VLA inference. OxyGen achieves up to 3.7times speedup over isolated execution, delivering over 200 tokens/s language throughput and 70 Hz action frequency simultaneously without degrading action quality, and we further validate the gains on a real humanoid robot with on-board Jetson AGX Thor.

Sharing context between LLMs in a multi-model system requires the receiving model to prefill the shared prefix because KV caches are model-specific. Recent closed-form cross-model KV transfer, hereafter Full-Head Mapping, avoids this replay by fitting a training-free affine mapper from source to target caches. However, its full-head design maps each target KV head from every source KV head in the selected layers, making transfer quality sensitive to architectural differences and causing mapper storage and application cost to grow with layer support. To this end, we introduce CacheBridge, which co-designs architecture-indexed mapper support, attention-aligned calibration, and bounded mapper construction while retaining a closed-form affine interface for online deployment. CacheBridge restricts each target head to a matched source head, weights reconstruction errors by causal attention sensitivity, and uses a fused GPU kernel to construct weighted sufficient statistics without materializing full observation tensors. Across three transfer directions, CacheBridge recovers the two Ministral 3 transfer directions where Full-Head Mapping loses substantial accuracy while preserving 99.83\% mean target retention on Qwen3. On Qwen3 14Bto32B, it reduces mapper storage by 8times, accelerates application by up to 3.0times, matches \fullhead with one tenth of the calibration data, and reduces 500-sequence construction from 92.63 to 8.63 seconds (10.7times).

Long-horizon manipulation is partially observable: the information needed to choose the next action may appear only in observations from minutes earlier. Existing memory mechanisms: retrieval banks, learned compressors, recurrent states must decide what to keep from the past before knowing what a future decision will require. This was motivated by the assumption that minute-scale history is too large to process directly, which modern VLM backbones no longer make true. In this work, we introduce SimpleMemVLA, a VLA without a dedicated memory module. It keeps the sampled history intact and passes it to the backbone in the timestamped video format the backbone was pretrained to process; the hidden states of a generated sub-task then form the only channel from history to a standard flow-matching action head. Since consecutive decisions share most of their history, prefilling the shared prefix during action execution keeps latency close to a single-frame VLA. SimpleMemVLA sets a new state of the art on four memory benchmarks without cost on general-purpose control. Holding the backbone and training setup fixed, it outperforms retrieval, compression and recurrent-state mechanisms by a wide margin, and causal interventions confirm that the policy genuinely reads its history. Code available at https://github.com/wadeKeith/SimpleMemVLA

Large language models represent context with a key-value (KV) cache. Caches are model-specific: for the same text, models with different architectures or weights produce incompatible representations. This makes it costly to switch models over a shared context: although the context has already been processed by one model, the incoming model must process it again to build its own cache. We introduce KV-Lingo, a method for translating the KV cache of a source model into one that can be read by a target model. KV-Lingo consists of a collection of linear maps, typically one per layer of the target model, that are applied independently on all tokens' key and value representations. We train these maps using distillation, minimising the divergence between the target model's predictions from its native cache and those from the translated cache. We consider several model pairs spanning multiple sizes and architectures, training one translator per pair on a generic text corpus. The resulting translators preserve strong downstream performance in both small-to-large and large-to-small transfers. Since a switch then costs a linear map and a single decoding step instead of a prefill, replacing re-prefill with cache translation reduces the time to first token after a model switch by 9.6x already on a 64-token prompt for Qwen models on an Apple M3 Ultra, and by up to 29x at 32k context length on an H100. These gains make KV-Lingo particularly useful for dynamic model routing: a context can be processed by one model and handed off to another only when needed, without re-prefilling the shared prefix. We finally show that KV-Lingo can be used for seamless model switching, staying close to re-prefill across repeated switches in our multi-turn evaluations.

Prefill and decode reward different approaches to quantization: low-precision arithmetic accelerates prompt processing, while compact weights reduce memory traffic during generation. We propose "disaggregated quantization" (DQ), which specializes computation formats, weights and storage placement to both of these phases. On Qwen 3 and Gemma 3, removing activation quantization specifically on decode improves accuracy on decode-heavy tasks without increasing inference cost. Training separate compute-native prefill weights accelerates prompt processing relative to weight-only inference while matching or exceeding its accuracy at 2-3-bit decode on both decode-heavy and prefill-heavy tasks. With released Qwen3.8-27B GGUF decoders, training an NVFP4 prefiller improves 1-bit accuracy by 32.5 points on MMLU-Pro and 35.3 on MMMU-Pro without modifying the decode checkpoint. To accommodate the additional checkpoint on a single device, offloaded disaggregated prefill (ODP) streams its weights from SSD, amortizing loading over prompt length. On the same 27B model, ODP delivers a 1.78x time-to-first-token speedup over the weight-only baseline at 8K prompt length in llama.cpp. We evaluate accuracy under disaggregated serving in vLLM and further validate shared-weight format disaggregation through post-training quantization on models up to 2.8T parameters.

Existing routers rely on semantic query features or handcrafted features, which often fail to capture model-specific failures or intrinsic task difficulty. We instead route using internal LLM activations, specifically the residual stream. Our key idea, Encoder-Target Decoupling, separates the model that produces the predictive signal (the Encoder) from the model whose correctness is being estimated (the Target), allowing open-weight encoders to predict the performance of closed-source target models. We evaluate layerwise geometric probes, finding that Fisher Separability (J) effectively identifies informative layers, supported by Effective Dimensionality (d_{eff}) diagnostics. We then utilize a SharedTrunkNet, a joint multi-output MLP that predicts simultaneous correctness probabilities across candidate models using concatenated prefill features. In our experiments, SharedTrunkNet consistently outperforms semantic baselines. At its best, SharedTrunkNet closes 45.58% of the gap between the strongest standalone model and the oracle while achieving 74.31% cost savings relative to the most expensive model. These results demonstrate that prefill activations provide a robust routing signal, establishing activation-based routing as a high-performance alternative to purely semantic selection.

Large language models (LLMs) handle many tasks with one set of parameters, but under KV-cached inference it is unclear what task-general structure, if any, is used at decode time rather than during prefill. We propose DecodeShare, a protocol that identifies a low-dimensional subspace consistently shared across tasks in decode-time hidden states, and then tests its causal role by removing that subspace only during decoding. In our experiments, disturbing the discovered shared subspace degrades decision performance far more than disturbing either a prefill-derived or random subspace under the same intervention budget. We further show this decode-shared subspace has practical consequences for activation steering: common steering directions can overlap the task-general decode channel. Projecting out this shared subspace directly separates the functional roles of the two components, while evaluating steering vectors at decode-time yields more reliable signal for downstream deployment than prefill-based proxies. Despite its compactness, the shared subspace can serve as a high-leverage causal channel at decode time. Code is available at: https://github.com/Zishan-Shao/decodeshare.git.

Mixture-of-Experts (MoE) models scale capacity for strong quality while keeping per-token compute bounded through sparse expert activation. Yet low-latency MoE serving is increasingly challenging, because it spans two inference phases with fundamentally different bottlenecks: prefill is dominated by token-wise expert computation, whereas decode is constrained by memory traffic from the batch-wise activated expert set. However, existing training-free acceleration methods optimize only a single resource proxy, either the experts each token executes or the experts a batch activates, and either discard the excluded experts' contribution or leave it only implicitly approximated. In this paper, we propose ExFold, a unified training-free expert-folding framework for jointly accelerating MoE prefill and decode. ExFold casts both prefill and decode as one budgeted output-approximation problem: execute only a phase-specific constrained expert set while projecting the contribution of budget-excluded experts onto retained experts using calibrated scalar projectors. Motivated by the observation that many expert outputs are directionally aligned but differ in magnitude, ExFold calibrates a pairwise scalar-projector matrix on unlabeled data and uses it at inference time to fold excluded expert contributions into retained experts. Under this view, prefill acceleration becomes token-level Top-K folding, and decode acceleration becomes batch-level expert-pool folding. The two phases differ only in how retained experts are selected, while excluded contributions are recovered by one shared folding mechanism. We implement ExFold as a plug-and-play plugin in vLLM, with a lightweight expert-folding CUDA kernel, delivering up to 1.41x TTFT and 2.45x TPOT speedups while retaining about 99% of the original average quality.

Prompt-specialized multi-agent systems enable multiple agents to share a model while performing complementary roles to solve complex tasks. However, agent-specific prefixes change the KV cache generated for the same shared context, causing each agent to repeatedly prefill the growing context and construct a separate cache with high computation and memory overhead. Selective recomputation reduces this redundancy but still retains substantial model execution, while existing delta correction methods either support only recurring context relations or maintain memory-intensive online correction states for dynamically changing context. For first seen shared context, these methods also construct a reference cache outside the agent workflow, and an approximate correction at the first agent affects the outputs passed to subsequent agents. We present KVCMAS, an online KV cache correction framework that represents cross-agent cache deviations using compact low-rank states and seamlessly chains corrections along the agent workflow without an additional reference prefill. This design supports dynamically changing shared context while preserving an exact first-agent cache. Across multiple language and vision-language workloads, KVCMAS matches or improves the accuracy of prior KV cache sharing methods while achieving the lowest TTFT under highly concurrent serving. Under controlled serving traces, it provides a 2.0x TTFT speedup over inference without KV cache sharing and reduces peak GPU memory by up to 3.7x relative to a prior KV cache correction method. These results establish KVCMAS as an accurate and scalable KV cache sharing approach for prompt-specialized multi-agent serving.

Reusing the attention KV cache across requests is a standard way to cut prefill cost in long-context LLM serving, and production systems increasingly back the per-engine cache with a remote tier shared by every engine. We study such a tier in a disaggregated deployment of GLM-5.3, an FP8 mixture-of-experts model with multi-head latent attention (MLA), on 8xB300 nodes running prefill context parallelism (PCP8). Enabling the remote tier (LMCache with a Valkey store) left median time-to-first-token unchanged but raised the 16k-token p99 from 3.96 s to 17.3 s. Replaying a production request stream on an isolated engine, we find that a remote hit took 0.88 s against 0.31 s to recompute the prompt, and that synchronous loading turned a hit-heavy stream into an unstable queue: p99 83.32 s with the GPUs 7% busy. A two-term cost model explains both: a hit pays off only if the tier delivers more than B* = sR (2.53 GB/s for this model and GPU), and a fixed per-hit engine cost (T0 ~ 0.33 s) means that hits on prompts shorter than about 17k tokens cannot beat recompute at any bandwidth. Guided by the model, we (i) shard the MLA KV store across PCP ranks, with a proof that the existing minimum-over-ranks lookup returns the longest cached prefix and a load protocol that can never desynchronize collectives; (ii) partition the remote tier by rank, one server instance per rank with no coordination, which raises GET bandwidth 6.3x to 10.76 GB/s; (iii) add asynchronous loading to the sharded store; and (iv) fix three client bugs that caused unbounded stalls. On the hit-heavy stream, with 98.5% of prompt tokens served from the remote tier, p99 falls from 83.32 s to 0.67 s. The sharded store raises prefill throughput by 14%, and by 34% together with an upstream kernel fix. All changes are submitted upstream to LMCache.

Long-context prefill remains expensive because full/GQA layers still score the historical sequence, even in hybrid models with local, sparse, linear, or recurrent components. We study how much dense attention is needed to preserve task-level behavior under explicit support granularity and top-k budgets. We introduce an attention-mass top-k oracle for existing GQA checkpoints: for each layer and query position, it computes dense attention, selects head-averaged token support, and recomputes attention only on that support. The oracle is a diagnostic reference, not a deployable accelerator, and separates sparse-budget feasibility from indexer error and runtime realization effects. On Qwen-family retrieval-heavy evaluations, the longest per-query oracle rows stay within 1 point of dense, and a Qwen3.5-9B RULER-style sweep from 4K to 100K stays within 0.48 points. Guided by the oracle, we derive a head-collapsed auxiliary indexer trained by KL distillation from dense attention-mass distributions while keeping the backbone frozen. With separately distilled Qwen3.5-0.8B and Qwen3.5-9B indexers, the reported 16K/32K validation macro gaps are +2.04 and +1.13 points, treated as quality preservation rather than improvement; fused selection-block-shared support can introduce a larger realization gap. Preliminary single-card TTFT measurements show distilled-indexer sparse serving speedups of 1.71x for Qwen3.5-0.8B on NPU and 1.93x for Qwen3.5-9B on GPU against its dense FlashAttention-2 baseline. Additional random-init stress rows reach 3.44x, indicating sparse-runtime headroom but not validated output quality. This first release separates oracle feasibility, distilled-indexer quality, and runtime headroom, leaving a fully matched quality-latency frontier to future work.

LLM serving systems are provisioned for peak load to meet strict latency targets, leaving substantial GPU compute idle whenever traffic falls below peak. We present DeltaServe, a host-agnostic co-serving design that converts this idle inference capacity into LoRA fine-tuning throughput while preserving inference service-level objectives (SLOs). DeltaServe integrates with existing inference engines through a compact hook interface that requires only multi-LoRA batching support. It exploits the shared execution structure of inference prefill and LoRA fine-tuning forward passes, and uses an SLO-aware scheduler to admit and execute fine-tuning only when sufficient inference headroom is available. The scheduler is driven by a CUDA-graph-aware latency model calibrated offline and refined online. We integrate DeltaServe with vLLM, SGLang, and S-LoRA. On a production trace from Company X, DeltaServe on vLLM delivers 2.9x higher fine-tuning throughput than LLMStation at 100% inference SLO compliance, versus 85% for LLMStation. It also achieves 39% higher fine-tuning throughput than a baseline running vLLM+torchtune, using no additional hardware and maintaining full SLO compliance.

Two widely adopted techniques for LLM inference serving systems today are hybrid batching and disaggregated serving. A hybrid batch combines prefill and decode tokens of different requests in the same batch to improve resource utilization and throughput at the cost of increased latency per token. In contrast, disaggregated serving decouples compute-bound prefill and bandwidth-bound decode phases to optimize for service level objectives (SLOs) at the cost of resource under-utilization and KV-cache transfer overheads. To address the limitations of these techniques, we propose RAPID-Serve: a technique to concurrently execute prefill and decode on the same GPU(s) to meet latency SLOs while maintaining high throughput and efficient resource utilization. Furthermore, we propose Adaptive Resource Management for runtime compute resource allocation, optionally leveraging CU masking (a fine-grained Compute Unit partitioning feature on AMD InstinctTM GPUs). RAPID-Serve provides up to 4.1x (average 1.7x) unconstrained throughput improvement and 32x and higher (average 4.9x) throughput improvement under SLO constraints, showing it as an effective strategy compared to the state-of-the-art approaches, particularly in resource-constrained environments.

Multi-agent LLM systems routinely generate multiple candidate responses that are aggregated by an LLM judge. To reduce the dominant prefill cost in such pipelines, recent work advocates KV cache reuse across partially shared contexts and reports substantial speedups for generation agents. In this work, we show that these efficiency gains do not transfer uniformly to judge-centric inference. Across GSM8K, MMLU, and HumanEval, we find that reuse strategies that are effective for execution agents can severely perturb judge behavior: end-task accuracy may appear stable, yet the judge's selection becomes highly inconsistent with dense prefill. We quantify this risk using Judge Consistency Rate (JCR) and provide diagnostics showing that reuse systematically weakens cross-candidate attention, especially for later candidate blocks. Our ablation further demonstrates that explicit cross-candidate interaction is crucial for preserving dense-prefill decisions. Overall, our results identify a previously overlooked failure mode of KV cache reuse and highlight judge-centric inference as a distinct regime that demands dedicated, risk-aware system design.

Nanbeige4.2-3B is a 3B-parameter agentic model built around a Looped Transformer (LT) that reuses one stack of layers for a second forward pass, adding effective depth without additional parameters. Evaluated on Apple Silicon (MPS), we identify five independent bugs which prevent the released checkpoint from running via Hugging Face transformers out of the box (including a silently-zeroed RoPE buffer and calls to removed transformers cache APIs). Furthermore, we show that fixing these bugs is still not sufficient for agentic tasks, due to the LT's layer-reuse strategy (which effectively doubles peak attention memory) used to achieve parameter efficiency. We thus introduce a chunked-prefill strategy which alleviates the incurred memory-capacity penalty, extending allowable context width by 2.7 times on 32~GiB shared memory. However, even with the reduced memory overhead, we show that patches are required to render Nanbeige4.2-3B usable; resolving both system prompt and MPS-native memory bugs finally allows reliable evaluation on standard MCP and tool-calling benchmarks. On a subset of MCPMark, the debugged model completes up to 30\% of real agentic tasks (up from the original's 0\%), while, on BFCL, it is near-perfect at single tool calls (yet fails the majority of multi-tool tests). We release the patched checkpoint, system prompt optimizer, and evaluation harnesses at https://github.com/johnhalloran321/Nanbeige4.2-3B-mps-fix.

Multi-LoRA agent systems enable efficient role specialization by sharing a common backbone model. However, each agent repeatedly processes the growing shared trajectory and constructs its own KV cache, introducing substantial memory and computation redundancy in long-horizon tasks. Existing KV cache sharing methods reduce this repeated prefill, but they either require additional training or architectural constraints or retain substantial model computation. Moreover, direct cache reuse causes the current agent to rely on cache states generated by the previous agent's adapter, weakening the role-specific behavior encoded by its own LoRA. We present PReCache, a training-free KV cache sharing framework with two designs, namely PreLRShared and ReBaseShared, that share the base cache computed using the pretrained weights and precompute a compact agent-specific low-rank (LR) cache. To remove repeated prefill, PreLRShared precomputes each agent's LR cache when the shared context is first processed, allowing the current agent to use its own LR cache without reprocessing context processed by previous agents. To improve sharing accuracy, ReBaseShared reconstructs the shared base cache from adapter-free hidden states, reducing the remaining error caused by the previous agent's adapted representation. To minimize its reconstruction cost, we propose two inference schemes tailored to single-stream inference and concurrent serving, performing the same reconstruction after each agent's turn or alongside its execution, respectively. Across multiple models and agent benchmarks, PreLRShared achieves up to a 3.1x TTFT speedup and a 2.3x improvement in per-request throughput over inference without KV cache sharing. ReBaseShared best preserves accuracy overall among the evaluated cache-sharing methods, with an average drop of only 1.1 points relative to inference without cache sharing.

Sparse long-context inference requires efficient token retrieval in both prefill and decode. Existing methods often use different retrieval strategies for the two stages, preventing one retrieval representation from being reused throughout inference. We propose Self-Indexing Attention, a training-free framework built on a shared transform-domain sign-magnitude representation. The key signs provide a reusable token-level index for grouped prefill selection and decode retrieval, while the same representation remains compatible with external KV-cache compression without separate indexer metadata. This 1-bit index enables efficient retrieval through bitwise operations widely supported by modern accelerators. At 5% attention density, Self-Indexing Attention remains close to dense attention on LongBench and RULER and achieves up to 6.1x prefill and 10.3x decode attention-operator speedups. Experiments with TurboQuant and DeepSeekV4-Flash further demonstrate compatibility with low-bit KV-cache compression and pretrained sparse-attention indexers.

Large Language Models (LLMs) are increasingly deployed in both latency-sensitive online services and cost-sensitive offline workloads. Co-locating these workloads on shared serving instances can improve resource utilization, but directly applying this approach to Prefill/Decode (P/D) disaggregated systems introduces severe load imbalance, as fluctuating request mixes alter the intrinsic P/D ratio. Existing dynamic adjustment techniques cannot keep up with the bursty traffic patterns of online services. We propose a latency-constraint disaggregated architecture, which separates cluster resources into latency-strict and latency-relaxed pools based on task latency requirements. This design enables flexible placement of offline decode tasks, mitigating P/D imbalance while preserving online performance. To fully exploit this flexibility, we propose (1) a bottleneck-based scheduler guided by a Roofline-based performance model for performance bottleneck based scheduling, and (2) a fast preemption mechanism that strictly enforces Service Level Objectives (SLOs) for online requests. Experiments on real-world traces show that compared to existing offline system approaches, our method improves offline throughput by up to 3x, while maintaining online request SLOs.

Edge LLM deployment is shaped by more than model size and precision: inference backend, hardware platform, memory traffic, and power management all affect latency and efficiency. We present Hydra, a common-schema, phase-aware workload characterization framework for LLM inference on edge SoCs. Hydra instruments HuggingFace Transformers and llama.cpp with a shared per-prompt timing schema and fuses those records with hardware telemetry, enabling a multi-dimensional characterization of performance, system-resource utilization, and efficiency across prefill and decode phases. Using Hydra, we evaluate three consecutive edge System-on-Chip (SoC) generations (AGX Xavier, AGX Orin, and AGX Thor), 13 instruction-tuned LLMs from seven families, five execution formats, and consider input/output-length sensitivity. The resulting artifact contains roughly 107K per-prompt records and is publicly released with Hydra. Our analysis shows that aggregate latency alone hides key deployment effects: backend structure changes where latency is introduced, quantization reduces memory traffic and energy but does not predict power monotonically, and SoC generation changes how utilization and efficiency should be interpreted. By connecting phase-level timing with system-resource utilization and efficiency metrics, Hydra enables reproducible, phase-aware characterization of edge LLM inference. Hydra's source code and the collected per-prompt trace corpus are available open-source at: https://github.com/amirtaherin/hydra

The increasing complexity of AI tasks has shifted the paradigm from monolithic models toward multi-agent large language model (LLM) systems. However, these collaborative architectures introduce a critical bottleneck: redundant prefill computation for shared content generated by previous agents, which significantly increases KV cache memory usage and time-to-first-token (TTFT). While various KV cache methods have been proposed to mitigate prefill redundancy, they either fail to maintain accuracy on agent-generated outputs or exhibit low reuse rates due to rigid constraints. We present RelayCaching, a training-free inference method that directly reuses decoding phase KV caches from previous agents in subsequent prefill phases. Our key insight is that KV caches for identical content are highly consistent across phases, while prefix-induced deviations are sparse and localized within a limited range of layers and token positions. By selectively recomputing KV caches at these positions, RelayCaching preserves model accuracy with minimal overhead, yielding a superior accuracy-efficiency trade-off over existing methods. Experiments on diverse collaborative LLM tasks spanning mathematical reasoning, general knowledge, and code generation demonstrate that RelayCaching achieves over 80% KV cache reuse, reduces TTFT by up to 4.7times compared to the standard pipeline, all with negligible accuracy degradation.

Multimodal agents commonly generate free-form reasoning before each action. For small models, limited model capacity can result in lengthy reasoning that provides little useful guidance for action generation while incurring substantial inference cost. To address this challenge, we introduce Selection-based Structured Reasoning (SSR), a framework that reformulates reasoning as selection instead of open-ended generation. SSR represents recurring high-level reasoning as pre-specified, reusable natural-language candidates. At each turn, the model selects from these reasoning candidates based on their likelihoods given the current context, without requiring an auxiliary task head. Using pre-specified reasoning traces enables parallel scoring, where teacher-forced prefilling computes token likelihoods concurrently within and across candidates using a shared context KV cache. We evaluate SSR on seven multimodal search benchmarks using 2B and 4B models. Across multiple reinforcement learning objectives and supervised fine-tuning, SSR delivers significant efficiency gains without sacrificing task performance. SSR achieves an average success rate competitive with leading search agents of the same scale, while reducing per-turn reasoning latency by over 90% and total per-question model inference latency by 28-54%. Project page: https://zfy0314.github.io/ssr-webpage/.

During inference for transformer-based large language models (LLM), prefilling is the computation of the key-value (KV) cache for input tokens in the prompt prior to autoregressive generation. For longer input prompt lengths, prefilling will incur a significant overhead on decoding time. In this work, we highlight the following pitfall of prefilling: for batches containing high-varying prompt lengths, significant computation is wasted by the standard practice of padding sequences to the maximum length. As LLMs increasingly support longer context lengths, potentially up to 10 million tokens, variations in prompt lengths within a batch become more pronounced. To address this, we propose Prepacking, a simple yet effective method to optimize prefilling computation. To avoid redundant computation on pad tokens, prepacking combines prompts of varying lengths into a sequence and packs multiple sequences into a compact batch using a bin-packing algorithm. It then modifies the attention mask and positional encoding to compute multiple prefilled KV-caches for multiple prompts within a single sequence. On standard curated dataset containing prompts with varying lengths, we obtain a significant speed and memory efficiency improvements as compared to the default padding-based prefilling computation within Huggingface across a range of base model configurations and inference serving scenarios.

Large language models (LLMs) excel across diverse tasks but face significant deployment challenges due to high inference costs. LLM inference comprises prefill (compute-bound) and decode (memory-bound) stages, with decode dominating latency particularly for long sequences. Current decoder-only models handle both stages uniformly, despite their distinct computational profiles. We propose OverFill, which decouples these stages to optimize accuracy-efficiency tradeoffs. OverFill begins with a full model for prefill, processing system and user inputs in parallel. It then switches to a dense pruned model, while generating tokens sequentially. Leveraging more compute during prefill, OverFill improves generation quality with minimal latency overhead. Our 3B-to-1B OverFill configuration outperforms 1B pruned models by 83.2%, while the 8B-to-3B configuration improves over 3B pruned models by 79.2% on average across standard benchmarks. OverFill matches the performance of same-sized models trained from scratch, while using significantly less training data. Our code is available at https://github.com/friendshipkim/overfill.

Large language model (LLM) agents serving different users often solve related tasks, yet separate user histories can leave reusable experience inaccessible to other agents. Pooling memories expands access but risks transferring preferences that conflict with the receiving user's requirements. We introduce ShareMem, a memory architecture that shares reusable experience while grounding its application in the receiving user's own preferences. Shared experiences indicate how to act and which preferences to consult; the receiving user's memory supplies their concrete values. Two-stage consolidation refines experience locally before integrating accepted edits into a shared pool. During execution, scope-first retrieval jointly selects local and shared experiences under a common entry budget, while a user-bound channel supports initial and agent-initiated preference retrieval. We evaluate ShareMem across web navigation (Mind2Web), online personalized interaction (VitaBench~2.0), and multi-session coding (MemoryCode) with four backbone models. It improves step success, average task success, and dialogue-macro coding scores, respectively, over matched user-local memory across all four models. Ablations favor two-stage consolidation for smaller shared pools, lower induction token usage, and better downstream performance, and support complementarity between experience guidance and active preference retrieval. Further analyses show that sharing helps most when relevant local experience is scarce, while source quality and cross-user preference interference limit useful transfer.

Large Language Models (LLMs) suffer from huge number of parameters, which restricts their deployment on edge devices. Weight sharing is one promising solution that encourages weight reuse, effectively reducing memory usage with less performance drop. However, current weight sharing techniques primarily focus on small-scale models like BERT and employ coarse-grained sharing rules, e.g., layer-wise. This becomes limiting given the prevalence of LLMs and sharing an entire layer or block obviously diminishes the flexibility of weight sharing. In this paper, we present a perspective on $textbf{head-wise shareable attention for large language models}. We further propose two memory-efficient methods that share parameters across attention heads, with a specific focus on LLMs. Both of them use the same dynamic strategy to select the shared weight matrices. The first method directly reuses the pre-trained weights without retraining, denoted as DirectShare. The second method first post-trains with constraint on weight matrix similarity and then shares, denoted as PostShare$. Experimental results reveal our head-wise shared models still maintain satisfactory capabilities, demonstrating the feasibility of fine-grained weight sharing applied to LLMs.

Parameter-shared pre-trained language models (PLMs) have emerged as a successful approach in resource-constrained environments, enabling substantial reductions in model storage and memory costs without significant performance compromise. However, it is important to note that parameter sharing does not alleviate computational burdens associated with inference, thus impeding its practicality in situations characterized by limited stringent latency requirements or computational resources. Building upon neural ordinary differential equations (ODEs), we introduce a straightforward technique to enhance the inference efficiency of parameter-shared PLMs. Additionally, we propose a simple pre-training technique that leads to fully or partially shared models capable of achieving even greater inference acceleration. The experimental results demonstrate the effectiveness of our methods on both autoregressive and autoencoding PLMs, providing novel insights into more efficient utilization of parameter-shared models in resource-constrained settings.

Prefill-decode (PD) disaggregation has become the standard architecture for large-scale LLM serving, but in practice its deployment boundary is still determined by KVCache transfer. In conventional dense-attention models, prefill generates huge KVCache traffics that keep prefill and decode tightly coupled within a single high-bandwidth network domain, limiting heterogeneous deployment and resource elasticity. Recent hybrid-attention architectures substantially reduce KVCache size, making cross-cluster KVCache transport increasingly plausible. However, smaller KVCache alone does not make heterogeneous cross-datacenter PD serving practical: real workloads remain bursty, request lengths are highly skewed, prefix caches are unevenly distributed, and inter-cluster bandwidth fluctuates. A naive design that fully externalizes prefill can therefore still suffer from congestion, unstable queueing, and poor utilization. We present Prefill-as-a-Service (PrfaaS), a cross-datacenter serving architecture that selectively offloads long-context prefill to standalone, compute-dense prefill clusters and transfers the resulting KVCache over commodity Ethernet to local PD clusters for decode. Rather than treating reduced KVCache as sufficient, PrfaaS combines model-side KV efficiency with system-side selective offloading, bandwidth-aware scheduling, and cache-aware request placement. This design removes the requirement that heterogeneous accelerators share the same low-latency RDMA fabric, enabling independent scaling of prefill and decode capacity across loosely coupled clusters. In a case study using an internal 1T-parameter hybrid model, a PrfaaS-augmented heterogeneous deployment achieves 54% higher serving throughput and 64% lower P90 TTFT than a homogeneous PD baseline, with approximately 15% throughput gain at equal cost, while consuming only modest cross-datacenter bandwidth.

Many LLM tasks are performed in large batches or even offline, and the performance indictor for which is throughput. These tasks usually show the characteristic of prefix sharing, where different prompt input can partially show the common prefix. However, the existing LLM inference engines tend to optimize the streaming requests and show limitations of supporting the large batched tasks with the prefix sharing characteristic. The existing solutions use the LRU-based cache to reuse the KV context of common prefix. The KV context that is about to be reused may prematurely be evicted with the implicit cache management. Even if not evicted, the lifetime of the shared KV context is extended since requests sharing the same context are not scheduled together, resulting in larger memory usage. These streaming oriented systems schedule the requests in the first-come-first-serve or similar order. As a result, the requests with larger ratio of decoding steps may be scheduled too late to be able to mix with the prefill chunks to increase the hardware utilization. Besides, the token and request number based batching can limit the size of token-batch, which keeps the GPU from saturating for the iterations dominated by decoding tokens. We propose BatchLLM to address the above problems. BatchLLM explicitly identifies the common prefixes globally. The requests sharing the same prefix will be scheduled together to reuse the KV context the best, which also shrinks the lifetime of common KV memory. BatchLLM reorders the requests and schedules the requests with larger ratio of decoding first to better mix the decoding tokens with the latter prefill chunks and applies memory-centric token batching to enlarge the token-batch sizes, which helps to increase the GPU utilization. Extensive evaluation shows that BatchLLM outperforms vLLM by 1.1x to 2x on a set of microbenchmarks and two typical industry workloads.

Large Multimodal Models (LMMs) extend Large Language Models (LLMs) by handling diverse inputs such as images, audio, and video, but at the cost of adding a multimodal encoding stage that increases both computational and memory overhead. This step negatively affects key Service Level Objectives (SLOs), such as time to first token (TTFT) and time per output token (TPOT). We introduce Encode-Prefill-Decode (EPD) Disaggregation, a novel framework that separates the encoding, prefill, and decode stages onto dedicated resources. Unlike current systems, which bundle encoding and prefill together, our approach decouples these steps, unlocking new opportunities and optimizations. These include a mechanism to cache multimedia tokens for efficient transfer, a novel way to parallelize the encoding load within a request, a module for optimal resource allocation for disaggregated serving, and a novel role-switching method to handle changing workload characteristics. Experimental evaluations with popular LMMs show substantial gains in memory efficiency (up to 15x lower peak memory utilization), batch sizes (up to 22x larger), 10x more images per request, and 2.2x larger KV caches. Furthermore, it leads to significant improvements in SLO attainment (up to 90-100% improvement) and TTFT (up to 71% reduction), compared to systems that do not disaggregate. The code is available at https://github.com/vbdi/epdserve.

Prompt length is a major bottleneck in agentic large language model (LLM) workloads, where repeated inference steps and multi-call loops incur substantial prefill cost. Recent work on speculative prefill demonstrates that attention-based token importance estimation can enable training-free prompt compression, but this assumes the existence of a draft model that shares the same tokenizer as the target model. In practice, however, agentic pipelines frequently employ models without any smaller in-family draft model. In this work, we study cross-family speculative prefill, where a lightweight draft model from one model family is used to perform prompt compression for a target model from a different family. Using the same speculative prefill mechanism as prior work, we evaluate a range of cross-family draft-target combinations, including Qwen, LLaMA, and DeepSeek models. Across a broad diversity of tasks, we find that attention-based token importance estimation transfers reliably across different model families despite differences in model architectures and tokenizers between draft and target models. Cross-model prompt compression largely retains 90~100% of full-prompt baseline performance and, in some cases, slightly improves accuracy due to denoising effects, while delivering substantial reductions in time to first token (TTFT). These results suggest that speculative prefill depends mainly on task priors and semantic structure, thus serving as a generalizable prompt compression primitive. We discuss the implications of our findings for agentic systems, where repeated long-context inference and heterogeneous model stacks make cross-model prompt compression both necessary and practical.

The limited context window of contemporary large language models (LLMs) remains a huge barrier to their broader application across various domains. While continual pre-training on long-context data is a straightforward and effective solution, it incurs substantial costs in terms of data acquisition and computational resources. To alleviate this issue, we propose SharedLLM, a novel approach grounded in the design philosophy of multi-grained context compression and query-aware information retrieval. SharedLLM is composed of two short-context LLMs such as LLaMA-2, termed upper model and lower model. The lower model functions as a compressor while the upper model acts as a decoder. The upper model receives compressed, multi-grained context information from the lower model and performs context-aware modeling on the running text. Information transfer between the compressor and decoder occurs only at the lowest layers to refrain from long forward paths in the lower model and redundant cross-attention modules in the upper model. Based on this architecture, we introduce a specialized tree-style data structure to efficiently encode, store and retrieve multi-grained contextual information for text chunks. This structure, combined with a search algorithm, enables rapid encoding and retrieval of relevant information from various levels of the tree based on the input query. This entire process, wherein the sender and receiver are derived from the same LLM layer, is referred to as self-injection.

This study introduces an approach to optimize Parameter Efficient Fine Tuning (PEFT) for Pretrained Language Models (PLMs) by implementing a Shared Low Rank Adaptation (ShareLoRA). By strategically deploying ShareLoRA across different layers and adapting it for the Query, Key, and Value components of self-attention layers, we achieve a substantial reduction in the number of training parameters and memory usage. Importantly, ShareLoRA not only maintains model performance but also exhibits robustness in both classification and generation tasks across a variety of models, including RoBERTa, GPT-2, LLaMA and LLaMA2. It demonstrates superior transfer learning capabilities compared to standard LoRA applications and mitigates overfitting by sharing weights across layers. Our findings affirm that ShareLoRA effectively boosts parameter efficiency while ensuring scalable and high-quality performance across different language model architectures.

As large language models (LLMs) continue to advance rapidly, they are becoming increasingly capable while simultaneously demanding ever-longer context lengths. To improve the inference efficiency of long-context processing, several novel low-complexity hybrid architectures have recently been proposed, effectively alleviating the computational burden of long-context inference. However, existing research on long-context prefill acceleration remains predominantly focused on sparse attention mechanisms, which achieve their maximum speedup only on full-attention models. When transferred to emerging architectures--such as linear/full attention hybrids or sliding window/full attention hybrids--these prefill acceleration approaches suffer significant performance degradation. Furthermore, such methods are generally incompatible with continuous batching, making them difficult to integrate into modern inference engines such as vLLM. To this end, we propose UniPrefill, a prefill acceleration framework applicable to virtually any model architecture, which directly accelerates the model's computation at the token level. We further implement UniPrefill as a continuous batching operator and extend vLLM's scheduling strategy to natively support prefill-decode co-processing and tensor parallel for UniPrefill, enabling its seamless integration into vLLM. UniPrefill achieves up to 2.1x speedup in Time-To-First-Token (TTFT), with the acceleration becoming increasingly pronounced as the number of concurrent requests grows.

LAPS identifies and disaggregates requests with different prompt lengths in LLM serving to reduce TTFT latency. While recent systems have decoupled the prefill and decode stages to improve throughput, they still rely on unified scheduling policies that fail to adapt to heterogeneous workload characteristics. We observe that prompt-length variations lead to distinct performance bottlenecks, motivating an adaptive scheduling strategy. LAPS disaggregates multi-turn long-prefill requests from short-prefill ones and introduces a length-aware smart batching mechanism for short-prefill workloads. It adopts a dual-queue design that supports temporal disaggregation on a single prefill instance or spatial disaggregation across multiple instances. For short-prefill batches, a batch waiting window and CUDA Graph-based clustering mitigate interference from heterogeneous computation, reducing batching delay and lowering average latency. In real multi-turn workloads, LAPS reduces prefill latency by over 30\% compared to vanilla SGLang under prefill-decode disaggregation, and further decreases SLO violations by 28\% in multi-instance deployments with vanilla data-parallel configuration. Compared to the SGLang router with load balancing, it further lowers SLO violations by 12\% in multi-GPU settings. Under high concurrency and mixed-request scenarios, LAPS improves request throughput by 35\% serving Qwen2.5-32B model for prefill instance, demonstrating its effectiveness in optimizing heterogeneous LLM serving workloads.

Every recurrence of a looped language model adds cost in training, decoding, prefill, and reinforcement learning (RL). The closer recurrent states get to fixed points, the less the path to them matters. This enables truncated backpropagation in training; terminal key-value (KV) sharing for decoding with almost no loss in accuracy; a distilled student that prefills up to 1.79x faster; and RL updates that compute gradients from saved rollout states, 2x faster than backpropagating through the replayed trajectory. We therefore improve the two components of training that shape these fixed points: the depth prior and input injection. Fixed-depth training breaks KV sharing, and Huginn's broad depth prior supports sharing but dilutes supervision at the target depth more than sharing requires; we learn the prior from prediction feedback, with an entropy term that keeps it broad. Existing injection schemes let the state's component along the input amplify or cancel the injection; we remove this component with orthogonal injection. From 100M to 1.6B parameters, the learned prior and orthogonal injection lower perplexity at every scale relative to Huginn's prior and existing injection schemes, respectively. At 1.6B, the learned prior with a 3x smaller KV cache matches the downstream average of fixed-depth training with the full cache.

Serving disaggregated large language models (LLMs) over tens of thousands of xPU devices (GPUs or NPUs) with reliable performance faces multiple challenges. 1) Ignoring the diversity (various prefixes and tidal requests), treating all the prompts in a mixed pool is inadequate. To facilitate the similarity per scenario and minimize the inner mismatch on P/D (prefill and decoding) processing, fine-grained organization is required, dynamically adjusting P/D ratios for better performance. 2) Due to inaccurate estimation on workload (queue status or maintained connections), the global scheduler easily incurs unnecessary timeouts in prefill. 3) Block-fixed device-to-device (D2D) KVCache transfer over cluster-level RDMA (remote direct memory access) fails to achieve desired D2D utilization as expected. To overcome previous problems, this paper proposes an end-to-end system P/D-Serve, complying with the paradigm of MLOps (machine learning operations), which models end-to-end (E2E) P/D performance and enables: 1) fine-grained P/D organization, mapping the service with RoCE (RDMA over converged ethernet) as needed, to facilitate similar processing and dynamic adjustments on P/D ratios; 2) on-demand forwarding upon rejections for idle prefill, decoupling the scheduler from regular inaccurate reports and local queues, to avoid timeouts in prefill; and 3) efficient KVCache transfer via optimized D2D access. P/D-Serve is implemented upon Ascend and MindSpore, has been deployed over tens of thousands of NPUs for more than eight months in commercial use, and further achieves 60\%, 42\% and 46\% improvements on E2E throughput, time-to-first-token (TTFT) SLO (service level objective) and D2D transfer time. As the E2E system with optimizations, P/D-Serve achieves 6.7x increase on throughput, compared with aggregated LLMs.

Multi-agent LLM systems split work across models, so answering often requires knowledge that sits in another agent's context: a Sharer has encoded information that a Receiver needs to complete its task. They usually communicate by exchanging text, which puts autoregressive decoding on the critical path and reduces the exchange to a discrete message written without sight of the receiver's state. Recent latent protocols instead translate the sharer's key-value (KV) cache into the receiver's: C2C supports heterogeneous models but requires both to read the same input, while LCF-X removes this shared-context requirement through position-free sharer-cache pooling. Three restrictions remain: LCF-X compresses the sharer alone, supplies the same layer-local summary to every receiver position with no joint cross-layer memory to retrieve from, and assumes matched layer count and KV geometry. We introduce XKV, which lifts all three: learned-query attention pools both caches; self-attention over receiver-aligned layer tokens, with a learned layer map reconciling different depths, mixes the pooled summaries into a compact joint memory; and a shared position decoder lets every raw receiver cache position retrieve its own per-head-gated residual in the receiver's native KV geometry. Both models stay frozen and may differ in family, depth, KV-head count, head dimension, and tokenizer; only the translator is trained. Across 45 dataset-model-pair settings (six heterogeneous and three same-model ordered pairings, five datasets), XKV attains the highest macro score and best average rank, improving on LCF-X on every dataset (by 4.6 exact-match and 4.2 F1 points on ROPES) and surpassing text communication on four of the five, while training 76% fewer parameters and translating a cache pair 10.3x faster (5.8 vs. 59.9 ms); end to end, XKV is 26% faster than LCF-X and 6.8x faster than text communication.

Large Language Model (LLM) inference consists of two distinct phases - prefill phase which processes the input prompt and decode phase which generates output tokens autoregressively. While the prefill phase effectively saturates GPU compute at small batch sizes, the decode phase results in low compute utilization as it generates one token at a time per request. The varying prefill and decode times also lead to imbalance across micro-batches when using pipeline parallelism, resulting in further inefficiency due to bubbles. We present SARATHI to address these challenges. SARATHI employs chunked-prefills, which splits a prefill request into equal sized chunks, and decode-maximal batching, which constructs a batch using a single prefill chunk and populates the remaining slots with decodes. During inference, the prefill chunk saturates GPU compute, while the decode requests 'piggyback' and cost up to an order of magnitude less compared to a decode-only batch. Chunked-prefills allows constructing multiple decode-maximal batches from a single prefill request, maximizing coverage of decodes that can piggyback. Furthermore, the uniform compute design of these batches ameliorates the imbalance between micro-batches, significantly reducing pipeline bubbles. Our techniques yield significant improvements in inference performance across models and hardware. For the LLaMA-13B model on A6000 GPU, SARATHI improves decode throughput by up to 10x, and accelerates end-to-end throughput by up to 1.33x. For LLaMa-33B on A100 GPU, we achieve 1.25x higher end-to-end-throughput and up to 4.25x higher decode throughput. When used with pipeline parallelism on GPT-3, SARATHI reduces bubbles by 6.29x, resulting in an end-to-end throughput improvement of 1.91x.

Large language model agents solve tasks through long sequences of tool calls, and the prevailing design has a single strong model generate every step, although many steps are routine enough for a much smaller model. Existing ways of sharing this work keep the strong model as the generator: routers and collaborative agents decide which model handles each query or step, and speculative methods check a small model's drafts one step at a time, usually against the strong model's own action. We introduce SpecAgent, a collaboration protocol that turns the strong model from the author of each step into a reviewer of steps drafted by a weak model. The weak model executes read-only tool calls as it drafts, so that every step is grounded in real observations, and holds the first action that would modify the environment. The strong model then verifies the drafted segment in a single prefill pass, commits the longest prefix it judges semantically valid, and repairs the first rejected step. Because verification replaces autoregressive decoding with parallel prefill, the strong model decodes only short verdicts and occasional repairs rather than every step. On τ^2-Bench, SpecAgent comes within one point of the strong model's success rate while roughly halving memory traffic and wall time, and on AutomationBench and VitaBench it recovers 44-75% of the quality gap while lowering both. In an edge-cloud deployment on MCP-Atlas with three cloud models, it closes 53-75% of the weak-strong quality gap while the strong model generates at most half as many tokens. These results suggest that a strong model need not author every step of an agent: reviewing grounded drafts retains most of its quality while cutting both latency and memory traffic.

As large language models (LLMs) grow in size, traditional full fine-tuning becomes increasingly impractical due to its high computational and storage costs. Although popular parameter-efficient fine-tuning methods, such as LoRA, have significantly reduced the number of tunable parameters, there is still room for further optimization. In this work, we propose ASLoRA, a cross-layer parameter-sharing strategy combining global sharing with partial adaptive sharing. Specifically, we share the low-rank matrix A across all layers and adaptively merge matrix B during training. This sharing mechanism not only mitigates overfitting effectively but also captures inter-layer dependencies, significantly enhancing the model's representational capability. We conduct extensive experiments on various NLP tasks, showing that ASLoRA outperforms LoRA while using less than 25% of the parameters, highlighting its flexibility and superior parameter efficiency. Furthermore, in-depth analyses of the adaptive sharing strategy confirm its significant advantages in enhancing both model flexibility and task adaptability.

Vision-Language Models require efficient adaptation to continually emerging downstream tasks. While Parameter-Efficient Fine-Tuning mitigates catastrophic forgetting, assigning isolated modules per task leads to parameter explosion. Conversely, recent similarity-driven sharing mechanisms falsely equate superficial visual similarity with underlying alignment consistency. This fundamental mismatch triggers severe negative transfer between visually similar but logically distinct tasks and fails to exploit alignment reuse across visually diverse ones. We argue thatalignment sharing is fundamentally a geometric problem of overlapping optimization trajectories within shared low-rank subspaces. Grounded in this insight, we propose iGSP, a novel framework that achieves efficient adaptation via implicit gradient subspace projection. Leveraging the early convergence of MoE routers to establish the subspace basis, iGSP bifurcates the adaptation process into two phases. First, the Subspace Identification phase introduces candidate experts via basis pre-expansion, applies a novel subspace-constrained regularization to implicitly project new task gradients onto the historical subspace, and precisely prunes redundant dimensions by treating routing probabilities as gradient flow indicators, ultimately to maximize knowledge reuse. Second, the Orthogonal Subspace Fine-Tuning phase fixes this structural basis and removes the regularization to rapidly fit the task-specific residual loss. Extensive experiments on the MTIL benchmark demonstrate that iGSP achieves state-of-the-art accuracy while significantly improving training efficiency, reducing the average trainable parameters by 42.7\% compared to current SOTA methods, and decreasing the final total parameters by 86.9\% relative to counterparts. The source code is available at https://github.com/GeoX-Lab/iGSP.

The growing demand for large language models (LLMs) requires serving systems to handle many concurrent requests with diverse service level objectives (SLOs). This exacerbates head-of-line (HoL) blocking during the compute-intensive prefill phase, where long-running requests monopolize resources and delay higher-priority ones, leading to widespread time-to-first-token (TTFT) SLO violations. While chunked prefill enables interruptibility, it introduces an inherent trade-off between responsiveness and throughput: reducing chunk size improves response latency but degrades computational efficiency, whereas increasing chunk size maximizes throughput but exacerbates blocking. This necessitates an adaptive preemption mechanism. However, dynamically balancing execution granularity against scheduling overheads remains a key challenge. In this paper, we propose FlowPrefill, a TTFT-goodput-optimized serving system that resolves this conflict by decoupling preemption granularity from scheduling frequency. To achieve adaptive prefill scheduling, FlowPrefill introduces two key innovations: 1) Operator-Level Preemption, which leverages operator boundaries to enable fine-grained execution interruption without the efficiency loss associated with fixed small chunking; and 2) Event-Driven Scheduling, which triggers scheduling decisions only upon request arrival or completion events, thereby supporting efficient preemption responsiveness while minimizing control-plane overhead. Evaluation on real-world production traces shows that FlowPrefill improves maximum goodput by up to 5.6times compared to state-of-the-art systems while satisfying heterogeneous SLOs.

Large language models (LLMs) encounter computational challenges during long-sequence inference, especially in the attention pre-filling phase, where the complexity grows quadratically with the prompt length. Previous efforts to mitigate these challenges have relied on fixed sparse attention patterns or identifying sparse attention patterns based on limited cases. However, these methods lacked the flexibility to efficiently adapt to varying input demands. In this paper, we introduce FlexPrefill, a Flexible sparse Pre-filling mechanism that dynamically adjusts sparse attention patterns and computational budget in real-time to meet the specific requirements of each input and attention head. The flexibility of our method is demonstrated through two key innovations: 1) Query-Aware Sparse Pattern Determination: By measuring Jensen-Shannon divergence, this component adaptively switches between query-specific diverse attention patterns and predefined attention patterns. 2) Cumulative-Attention Based Index Selection: This component dynamically selects query-key indexes to be computed based on different attention patterns, ensuring the sum of attention scores meets a predefined threshold. FlexPrefill adaptively optimizes the sparse pattern and sparse ratio of each attention head based on the prompt, enhancing efficiency in long-sequence inference tasks. Experimental results show significant improvements in both speed and accuracy over prior methods, providing a more flexible and efficient solution for LLM inference.

Adapting large pretrained models to new tasks efficiently and continually is crucial for real-world deployment but remains challenging due to catastrophic forgetting and the high cost of retraining. While parameter-efficient tuning methods like low rank adaptation (LoRA) reduce computational demands, they lack mechanisms for strict continual learning and knowledge integration, without relying on data replay, or multiple adapters. We propose Share, a novel approach to parameter efficient continual finetuning that learns and dynamically updates a single, shared low-rank subspace, enabling seamless adaptation across multiple tasks and modalities. Share constructs a foundational subspace that extracts core knowledge from past tasks and incrementally integrates new information by identifying essential subspace directions. Knowledge from each new task is incorporated into this evolving subspace, facilitating forward knowledge transfer, while minimizing catastrophic interference. This approach achieves up to 100x parameter reduction and 281x memory savings over traditional LoRA methods, maintaining performance comparable to jointly trained models. A single Share model can replace hundreds of task-specific LoRA adapters, supporting scalable, asynchronous continual learning. Experiments across image classification, natural language understanding, 3D pose estimation, and text-to-image generation validate its effectiveness, making Share a practical and scalable solution for lifelong learning in large-scale AI systems.

Non-prefix KV cache reuse is a promising approach for improving inference efficiency in multi-agent systems as agents share the same context blocks. However, when agents have conflicting tasks, directly reusing non-prefix KV caches across agents can severely degrade model performance, causing up to a 90% drop. Existing remedies, including selective recomputation and offset-based calibration, recover a limited fraction of this loss. We argue that the problem lies not only in contaminated KV representations but also in the agent's difficulty interpreting reused context under its own instructions. To this end, we introduce LatentRemedy, which uses a few task-conditioned latent tokens to help the target agent leverage reused context without recomputing the shared block. Specifically, we use an MLP to map the last hidden state of the target prefix into a small number of latent tokens, which are placed after the reused KV block to interact with the shared context. To guide subsequent predictions toward the target task, we train the MLP through full-prefill distillation. Experiments show that LatentRemedy consistently outperforms existing reuse baselines on conflicting tasks while maintaining TTFT close to direct reuse as cache size grows. Code and data are available at https://github.com/chenzhwsysu57/kvreuse.

We release Super Apriel, a 15B-parameter supernet in which every decoder layer provides four trained mixer choices -- Full Attention (FA), Sliding Window Attention (SWA), Kimi Delta Attention (KDA), and Gated DeltaNet (GDN). A placement selects one mixer per layer; placements can be switched between requests at serving time without reloading weights, enabling multiple speed presets from a single checkpoint. The shared checkpoint also enables speculative decoding without a separate draft model. The all-FA preset matches the Apriel 1.6 teacher on all reported benchmarks; recommended hybrid presets span 2.9times to 10.7times decode throughput at 96% to 77% quality retention, with throughput advantages that compound at longer context lengths. With four mixer types across 48 layers, the configuration space is vast. A surrogate that predicts placement quality from the per-layer mixer assignment makes the speed-quality landscape tractable and identifies the best tradeoffs at each speed level. We investigate whether the best configurations at each speed level can be identified early in training or only after convergence. Rankings stabilize quickly at 0.5B scale, but the most efficient configurations exhibit higher instability at 15B, cautioning against extrapolation from smaller models. Super Apriel is trained by stochastic distillation from a frozen Apriel 1.6 teacher, followed by supervised fine-tuning. We release the supernet weights, Fast-LLM training code, vLLM serving code, and a placement optimization toolkit.

The demand for deploying large language models(LLMs) on mobile devices continues to increase, driven by escalating data security concerns and cloud costs. However, network bandwidth and memory limitations pose challenges for deploying billion-level models on mobile devices. In this study, we investigate the outputs of different layers across various scales of LLMs and found that the outputs of most layers exhibit significant similarity. Moreover, this similarity becomes more pronounced as the model size increases, indicating substantial redundancy in the depth direction of the LLMs. Based on this observation, we propose an efficient model volume compression strategy, termed FoldGPT, which combines block removal and block parameter sharing.This strategy consists of three parts: (1) Based on the learnable gating parameters, we determine the block importance ranking while modeling the coupling effect between blocks. Then we delete some redundant layers based on the given removal rate. (2) For the retained blocks, we apply a specially designed group parameter sharing strategy, where blocks within the same group share identical weights, significantly compressing the number of parameters and slightly reducing latency overhead. (3) After sharing these Blocks, we "cure" the mismatch caused by sparsity with a minor amount of fine-tuning and introduce a tail-layer distillation strategy to improve the performance. Experiments demonstrate that FoldGPT outperforms previous state-of-the-art(SOTA) methods in efficient model compression, demonstrating the feasibility of achieving model lightweighting through straightforward block removal and parameter sharing.

DistServe improves the performance of large language models (LLMs) serving by disaggregating the prefill and decoding computation. Existing LLM serving systems colocate the two phases and batch the computation of prefill and decoding across all users and requests. We find that this strategy not only leads to strong prefill-decoding interferences but also couples the resource allocation and parallelism plans for both phases. LLM applications often emphasize individual latency for each phase: time to first token (TTFT) for the prefill phase and time per output token (TPOT) of each request for the decoding phase. In the presence of stringent latency requirements, existing systems have to prioritize one latency over the other, or over-provision compute resources to meet both. DistServe assigns prefill and decoding computation to different GPUs, hence eliminating prefill-decoding interferences. Given the application's TTFT and TPOT requirements, DistServe co-optimizes the resource allocation and parallelism strategy tailored for each phase. DistServe also places the two phases according to the serving cluster's bandwidth to minimize the communication caused by disaggregation. As a result, DistServe significantly improves LLM serving performance in terms of the maximum rate that can be served within both TTFT and TPOT constraints on each GPU. Our evaluations show that on various popular LLMs, applications, and latency requirements, DistServe can serve 4.48x more requests or 10.2x tighter SLO, compared to state-of-the-art systems, while staying within latency constraints for > 90% of requests.

Large language models (LLMs) often incorporate multiple text chunks in their inputs to provide the necessary contexts. To speed up the prefill of the long LLM inputs, one can pre-compute the KV cache of a text and re-use the KV cache when the context is reused as the prefix of another LLM input. However, the reused text chunks are not always the input prefix, and when they are not, their precomputed KV caches cannot be directly used since they ignore the text's cross-attention with the preceding text in the LLM input. Thus, the benefits of reusing KV caches remain largely unrealized. This paper tackles just one question: when an LLM input contains multiple text chunks, how to quickly combine their precomputed KV caches in order to achieve the same generation quality as the expensive full prefill (i.e., without reusing KV cache)? We present CacheBlend, a scheme that reuses the pre-computed KV caches, regardless prefix or not, and selectively recomputes the KV values of a small subset of tokens to partially update each reused KV cache. In the meantime,the small extra delay for recomputing some tokens can be pipelined with the retrieval of KV caches within the same job,allowing CacheBlend to store KV caches in slower devices with more storage capacity while retrieving them without increasing the inference delay. By comparing CacheBlend with the state-of-the-art KV cache reusing schemes on three open-source LLMs of various sizes and four popular benchmark datasets of different tasks, we show that CacheBlend reduces time-to-first-token (TTFT) by 2.2-3.3X and increases the inference throughput by 2.8-5X, compared with full KV recompute, without compromising generation quality or incurring more storage cost.

Chunked prefill has become a widely adopted serving strategy for long-context large language models, but efficient attention computation in this regime remains challenging. Existing sparse attention methods are primarily designed for one-shot prefill and do not translate efficiently to chunked prefill: block-sparse kernels lose efficiency when the query length is limited by the chunk size, while fine-grained pattern search becomes costly when repeated over the accumulated KV cache at every chunk. QUOKA, a recent method that directly targets chunked prefill, avoids sparse-kernel overhead but relies on query-subsampled, token-level KV selection, which can miss query-specific KV entries and introduce explicit KV-copy overhead. To address these limitations, we propose CompactAttention, a chunked-prefill attention mechanism based on Block-Union KV Selection. CompactAttention treats 2D block-sparse masks as KV-selection signals rather than direct sparse-kernel execution plans, and converts them into GQA-aware per-group KV block tables through Q-block union and intra-group union. This construction produces the minimal block tables that preserve all KV blocks selected by the input masks under paged execution constraints, enabling selected KV blocks to be accessed in place without explicit KV compaction. On LLaMA-3.1-8B-Instruct, CompactAttention maintains accuracy close to dense attention on the RULER benchmark while delivering up to 2.72times attention speedup at 128K context length under chunked prefill.

Large Language Models (LLMs) and Vision-Language Models (VLMs) have demonstrated remarkable capabilities. However, their deployment is hindered by significant computational costs. Existing structured pruning methods, while hardware-efficient, often suffer from significant accuracy degradation. In this paper, we argue that this failure stems from a stage-agnostic pruning approach that overlooks the asymmetric roles between the prefill and decode stages. By introducing a virtual gate mechanism, our importance analysis reveals that deep layers are critical for next-token prediction (decode) but largely redundant for context encoding (prefill). Leveraging this insight, we propose Prefill-Only Pruning (POP), a stage-aware inference strategy that safely omits deep layers during the computationally intensive prefill stage while retaining the full model for the sensitive decode stage. To enable the transition between stages, we introduce independent Key-Value (KV) projections to maintain cache integrity, and a boundary handling strategy to ensure the accuracy of the first generated token. Extensive experiments on Llama-3.1, Qwen3-VL, and Gemma-3 across diverse modalities demonstrate that POP achieves up to 1.37times speedup in prefill latency with minimal performance loss, effectively overcoming the accuracy-efficiency trade-off limitations of existing structured pruning methods.

Transformers have become the standard solution for various AI tasks, with the query, key, and value (QKV) attention formulation playing a central role. However, the individual contribution of these three projections and the impact of omitting some remain poorly understood. We systematically evaluate three projection sharing constraints: a) Q-K=V (shared key-value), b) Q=K-V (shared query-key), and c) Q=K=V (single projection). The last two variants produce symmetric attention maps; to address this, we also explore asymmetric attention via 2D positional encodings. Through experiments spanning synthetic tasks, vision (MNIST, CIFAR, TinyImageNet, anomaly), and language modeling (300M and 1.2B parameter models on 10B tokens), we discovered that our transformers perform on par or occasionally better than the QKV transformer. In language modeling, Q-K=V projection sharing achieves 50% KV cache reduction with only 3.1% perplexity degradation. Crucially, projection sharing is complementary to head sharing (GQA/MQA): combining Q-K=V with GQA-4 yields 87.5% cache reduction, while Q-K=V + MQA achieves 96.9%, enabling practical on-device inference. We show that Q-K=V preserves quality because keys and values can occupy similar representational spaces and attention operates in a low-rank regime, whereas Q=K-V breaks attention directionality. Our results systematically characterize projection sharing as an underexplored instance of weight tying in attention, with direct, quantifiable inference memory benefits, particularly valuable for edge deployment. The code is publicly available at https://github.com/Brainchip-Inc/Do-Transformers-Need-3-Projections

The limited context window of contemporary large language models (LLMs) remains a primary bottleneck for their broader application across diverse domains. Although continual pre-training on long-context data offers a straightforward solution, it incurs prohibitive data acquisition and computational costs. To address this challenge, we propose~\modelname, a novel framework based on multi-grained context compression and query-aware information acquisition. SharedLLM comprises two stacked short-context LLMs: a lower model serving as a compressor and an upper model acting as a decoder. The lower model compresses long inputs into compact, multi-grained representations, which are then forwarded to the upper model for context-aware processing. To maximize efficiency, this information transfer occurs exclusively at the lowest layers, bypassing lengthy forward passes and redundant cross-attention operations. This entire process, wherein the upper and lower models are derived from the same underlying LLM layers, is termed~self-injection. To support this architecture, a specialized tree-based data structure enables the efficient encoding and query-aware retrieval of contextual information. Despite being trained on sequences of only 8K tokens, \modelname~effectively generalizes to inputs exceeding 128K tokens. Across a comprehensive suite of long-context modeling and understanding benchmarks, \modelname~achieves performance superior or comparable to strong baselines, striking an optimal balance between efficiency and accuracy. Furthermore, these design choices allow \modelname~to substantially reduce the memory footprint and yield notable inference speedups (2times over streaming and 3times over encoder-decoder architectures).

While large language models (LLMs) excel at handling long-context sequences, they require substantial prefill computation and key-value (KV) cache, which can heavily burden computational efficiency and memory usage in both prefill and decoding stages. Recent works that compress KV caches with prefill acceleration reduce this cost but inadvertently tie the prefill compute reduction to the decoding KV budget. This coupling arises from overlooking the layer-dependent variation of critical context, often leading to accuracy degradation. To address this issue, we introduce FastKV, a KV cache compression framework designed to reduce latency in both prefill and decoding by leveraging the stabilization of token importance in later layers. FastKV performs full-context computation until a Token-Selective Propagation (TSP) layer, which forwards only the most informative tokens to subsequent layers. From these propagated tokens, FastKV independently selects salient KV entries for caching, thereby decoupling KV budget from the prefill compute reduction based on the TSP decision. This independent control of the TSP rate and KV retention rate enables flexible optimization of efficiency and accuracy. Experimental results show that FastKV achieves speedups of up to 1.82times in prefill and 2.87times in decoding compared to the full-context baseline, while matching the accuracy of the baselines that only accelerate the decoding stage. Our code is available at https://github.com/dongwonjo/FastKV.

Large Language Model (LLM) inference in production must meet stringent service-level objectives for both time-to-first-token (TTFT) and time-between-token (TBT) while maximizing throughput under fixed compute, memory, and interconnect budgets. Modern serving systems adopt stall-free scheduling techniques such as chunked prefill, which splits long prompt processing along the token dimension and interleaves prefill with ongoing decode iterations. While effective at stabilizing TBT, chunked prefill incurs substantial overhead in Mixture-of-Experts (MoE) models: redundant expert weight loads increase memory traffic by up to 39% and inflate energy consumption. We propose layered prefill, a new scheduling paradigm that treats transformer layer groups as the primary scheduling unit. By vertically partitioning the model into contiguous layer groups and interleaving prefill and decode across the groups, layered prefill sustains stall-free decoding while eliminating chunk-induced MoE weight reloads. It reduces off-chip bandwidth demand, lowering TTFT by up to 70%, End-to-End latency by 41% and per-token energy by up to 22%. Evaluations show that layered prefill consistently improves the TTFT--TBT Pareto frontier over chunked prefill, reducing expert-load traffic and energy cost while maintaining stall-free decoding. Overall, shifting the scheduling axis from tokens to layers unlocks a new operating regime for high-efficiency, energy-aware LLM serving in co-located environments.

JEV models make multimodal decisions by directly scoring candidates. Although the common context is encoded once, candidate evaluation can still repeat matching token histories, duplicate inference states, and execute the full backbone. In this paper, we study these sources of redundancy and present FastJEV for compact candidate evaluation. We jointly organize history reuse and state storage, since sharing computation requires preserving states for later branches. We first introduce shared context anchoring to reuse recurrent initial states and omit unused final recurrent caches. We extend this reuse through candidate prefix sharing, retaining the intermediate states needed by subsequent branches. To further reduce the depth of these paths, we apply decision guided pruning based on relative score changes measured on a small unlabeled set. Our method retains full context encoding and all candidates without additional training. We evaluate FastJEV across three OmniJev model sizes on five public benchmarks and reconstructed LIBERO-10 offline questions. At the selected pruning budgets, the complete method reduces candidate depth by 43.75% to 45.83%, while retaining 93.66% to 97.52% of the original task scores on average across the six evaluation sets. Through controlled experiments, we show how candidate overlap and branching structure affect the execution cost of history reuse. In our implementation, candidate prefix sharing can reduce repeated computation while increasing latency. These findings motivate designing sharing granularity and execution schedules together for efficient JEV inference.

Real-world users often exhibit highly heterogeneous preferences over multiple objectives for LLM responses. A lightweight aligner can tailor these responses to individual preferences, but scarce user-specific feedback makes personalized training difficult. Learning shared initializations across users can support few-shot adaptation. However, heterogeneous preferences and competing objectives cause gradient conflicts across users and within each user, hindering effective initialization learning. This raises a central question: how can we collaboratively learn aligner initializations that support few-shot adaptation to diverse user preferences? To answer this question, we propose Approximate Pareto Optimality (APO). We first group users whose updates are compatible, so that their information can be combined with less interference. Within each group, we combine gradient descent with controlled ascent to coordinate competing objectives and move towards preference-specific points on the Pareto front. This produces an initialization that is close to the optima of the users in the group. We then iteratively refine it using updates from few-shot local adaptation, making it more effective for personalization. Furthermore, we establish conditional suboptimality bounds for a one-local-step collaborative update and characterize how initialization error affects subsequent stochastic adaptation. Experiments on Fed-ChatbotPA and UltraFeedback show consistent improvements over existing methods using only 20 local examples.

As large language models (LLMs) continue to scale, the memory footprint of key-value (KV) caches during inference has become a significant bottleneck. Existing approaches primarily focus on compressing KV caches within a single prompt or reusing shared prefixes or frequently ocurred text segments across prompts. However, such strategies are limited in scenarios where prompts are semantically similar but lexically different, which frequently occurs in tasks such as multi-document summarization and conversational agents. We propose SemShareKV, a KV cache sharing and compression framework that accelerates LLM inference by reusing KVCache in semantically similar prompts. Instead of relying on exact token matches, SemShareKV applies fuzzy token matching using locality-sensitive hashing (LSH) on token embeddings and incorporates Rotary Position Embedding (RoPE) to better preserve positional information. By selectively reusing relevant key-value pairs from a reference prompt's cache, SemShareKV reduces redundant computation while maintaining output quality. Experiments on diverse summarization datasets show up to 6.25times speedup and 42\% lower GPU memory usage with 5k tokens input, with negligible quality degradation. These results highlight the potential of semantic-aware cache sharing for efficient LLM inference.

Long-context modeling is a pivotal capability for Large Language Models, yet the quadratic complexity of attention remains a critical bottleneck, particularly during the compute-intensive prefilling phase. While various sparse attention mechanisms have been explored, they typically suffer from either significant search latency or insufficient sparsity. In this paper, we propose FlashPrefill, a framework enabling ultra-fast prefilling via instantaneous pattern discovery and thresholding. FlashPrefill leverages a fast block-searching technique to simultaneously locate dynamic vertical, slash, and block-sparse attention patterns. Crucially, it introduces a dynamic thresholding mechanism that bypasses the prohibitive overhead of sorting or accumulating attention scores while effectively eliminating the long-tail distribution to enhance sparsity. Extensive evaluations demonstrate that FlashPrefill achieves a substantial leap in efficiency, delivering an unprecedented 27.78x speedup on 256K sequences. Notably, unlike existing methods that incur efficiency degradation on shorter contexts, FlashPrefill maintains a 1.71x speedup even at a 4K context length, demonstrating its robustness and practical utility across varying sequence scales.

The burgeoning presence of multimodal content-sharing platforms propels the development of personalized recommender systems. Previous works usually suffer from data sparsity and cold-start problems, and may fail to adequately explore semantic user-product associations from multimodal data. To address these issues, we propose a novel Multi-Modal Hypergraph Contrastive Learning (MMHCL) framework for user recommendation. For a comprehensive information exploration from user-product relations, we construct two hypergraphs, i.e. a user-to-user (u2u) hypergraph and an item-to-item (i2i) hypergraph, to mine shared preferences among users and intricate multimodal semantic resemblance among items, respectively. This process yields denser second-order semantics that are fused with first-order user-item interaction as complementary to alleviate the data sparsity issue. Then, we design a contrastive feature enhancement paradigm by applying synergistic contrastive learning. By maximizing/minimizing the mutual information between second-order (e.g. shared preference pattern for users) and first-order (information of selected items for users) embeddings of the same/different users and items, the feature distinguishability can be effectively enhanced. Compared with using sparse primary user-item interaction only, our MMHCL obtains denser second-order hypergraphs and excavates more abundant shared attributes to explore the user-product associations, which to a certain extent alleviates the problems of data sparsity and cold-start. Extensive experiments have comprehensively demonstrated the effectiveness of our method. Our code is publicly available at: https://github.com/Xu107/MMHCL.

While Parameter-Efficient Fine-Tuning (PEFT) has substantially reduced the hardware cost of adapting Large Language Models (LLMs) by decreasing the number of trainable parameters, recent studies have sought to further improve PEFT through parameter sharing. However, these approaches either employ uniform parameter sharing across layers, which can delay convergence, or rely on dynamic masking strategies, which add computational overhead. The potential of sharing patterns inspired by the inherent hierarchical structure of Transformer architectures remains unexplored in PEFT. To address this gap, we introduce SAPE (Sandwich Adapters for Parameter Efficiency), a PEFT framework based on a sandwich-style hard weight-sharing topology. SAPE routes intermediate Transformer layers through balanced shared group adapters while strictly isolating the input embedding and final projection boundary transformations to prevent gradient interference. This design significantly reduces memory consumption while eliminating the computational overhead associated with dynamic parameter-sharing methods. Extensive evaluations across encoder-only and causal decoder architectures demonstrate that SAPE achieves state-of-the-art performance in low-parameter regimes. On natural language understanding, SAPE outperforms proPETL on RoBERTa-large while utilizing only 10% of the baseline's parameter budget. On natural language generation and world knowledge reasoning with LLaMA-3.2 (3B) under a strict ~0.6M parameter constraint, SAPE outperforms AdaLoRA, yielding absolute improvements of +4.85% on GSM8K and +3.11% on CommonsenseQA. Furthermore, through comprehensive topological ablations, we formalize an inherent capacity trade-off: while hard parameter sharing strongly regularizes semantic generalization, it slightly smooths the sharp layer-wise transformations required for rigid multi-step arithmetic reasoning.

Scaling language models unlocks impressive capabilities, but the accompanying computational and memory demands make both training and deployment expensive. Existing efficiency efforts typically target either parameter sharing or adaptive computation, leaving open the question of how to attain both simultaneously. We introduce Mixture-of-Recursions (MoR), a unified framework that combines the two axes of efficiency inside a single Recursive Transformer. MoR reuses a shared stack of layers across recursion steps to achieve parameter efficiency, while lightweight routers enable adaptive token-level thinking by dynamically assigning different recursion depths to individual tokens. This allows MoR to focus quadratic attention computation only among tokens still active at a given recursion depth, further improving memory access efficiency by selectively caching only their key-value pairs. Beyond these core mechanisms, we also propose a KV sharing variant that reuses KV pairs from the first recursion, specifically designed to decrease prefill latency and memory footprint. Across model scales ranging from 135M to 1.7B parameters, MoR forms a new Pareto frontier: at equal training FLOPs and smaller model sizes, it significantly lowers validation perplexity and improves few-shot accuracy, while delivering higher throughput compared with vanilla and existing recursive baselines. These gains demonstrate that MoR is an effective path towards large-model quality without incurring large-model cost.

Mid-prefill pruning can reduce the sequence processed by deeper transformer layers, but attention concentration alone does not certify that discarded context is dispensable. We formulate EntroPrefill as a Renyi-guided proposal mechanism coupled to explicit constraints on discarded attention mass. Sink-isolated, regularized head pooling respects grouped-query attention while exposing a quantitative trade-off between specialization and worst-head coverage. We derive a mixture-to-head deletion envelope, a computable upper bound on feasible token removal, and a finite-sample observer guarantee that remains valid when the pruning layer is selected adaptively. We then establish a conditional transformer perturbation bound with explicit sufficient Lipschitz constants and a first-token decision-margin corollary. A counterexample shows why shallow observations alone cannot imply an unconditional future-output guarantee. The systems analysis distinguishes query-head unions, physical page allocation, and KV-transfer payload, and gives an arithmetic break-even condition for pruning. This manuscript is theoretical in scope: it defines the procedure, its assumptions, and its formal limits, but does not report measured acceleration or task-accuracy preservation. Experiments are reserved for subsequent validation of the assumptions, approximation tightness, and end-to-end resource trade-offs.

Latent communication passes internal states between language models instead of decoded text, but higher receiver accuracy does not show that the receiver used the message content. Across five method-dataset pairs, replacing each message with one from an unrelated question changes accuracy by at most 0.60 points, even when communication adds 15.44 points over the receiver alone. Thus the interface can supply the gain while making the sharer dispensable. Draft-KV instead sends the key-value states formed while the sharer drafts an answer to the current question. Linear projections place these states in a side memory read through a gated attention branch, and progressive training moves from message reconstruction to answer supervision under a guard on harm from mismatched messages. Both models remain frozen and the interface trains 1.05M parameters, 348x fewer than C2C. With a Qwen3-8B sharer, a frozen Qwen2.5-0.5B-Instruct receiver reaches 78.04% on MMLU-Redux, versus 37.45% alone and 36.40% with reassigned messages. At fixed interface size, scaling the sharer from 0.6B to 8B raises accuracy from 46.11% to 78.04%; communication also transfers to held-out tasks and can exceed both models when each holds different evidence.

Each LLM serving request goes through two phases. The first is prefill which processes the entire input prompt to produce one output token and the second is decode which generates the rest of output tokens, one-at-a-time. Prefill iterations have high latency but saturate GPU compute due to parallel processing of the input prompt. In contrast, decode iterations have low latency but also low compute utilization because a decode iteration processes only a single token per request. This makes batching highly effective for decodes and consequently for overall throughput. However, batching multiple requests leads to an interleaving of prefill and decode iterations which makes it challenging to achieve both high throughput and low latency. We introduce an efficient LLM inference scheduler Sarathi-Serve inspired by the techniques we originally proposed for optimizing throughput in Sarathi. Sarathi-Serve leverages chunked-prefills from Sarathi to create stall-free schedules that can add new requests in a batch without pausing ongoing decodes. Stall-free scheduling unlocks the opportunity to improve throughput with large batch sizes while minimizing the effect of batching on latency. Our evaluation shows that Sarathi-Serve improves serving throughput within desired latency SLOs of Mistral-7B by up to 2.6x on a single A100 GPU and up to 6.9x for Falcon-180B on 8 A100 GPUs over Orca and vLLM.

Multi-agent large language model (LLM) systems are increasingly adopted for complex language processing tasks that require communication and coordination among agents. However, these systems often suffer substantial overhead from repeated reprocessing of overlapping contexts across agents. In typical pipelines, once an agent receives a message from its predecessor, the full context-including prior turns-must be reprocessed from scratch, leading to inefficient processing. While key-value (KV) caching is an effective solution for avoiding redundant computation in single-agent settings where prefixes remain unchanged, it cannot be directly reused in multi-agent scenarios due to diverging prefixes introduced by agent-specific context extensions. We identify that the core challenge lies in the offset variance of KV-caches across agents. To address this, we propose KVCOMM, a training-free framework that enables efficient prefilling in multi-agent inference by reusing KV-caches and aligning cache offsets of overlapping contexts under diverse prefix contexts. KVCOMM estimates and adjusts KV-caches for shared content by referencing a pool of cached examples-termed anchors-that store observed cache deviations under varying prefixes. The anchor pool is maintained and updated online, allowing dynamic adaptation to distinct user requests and context structures. KVCOMM achieves over 70% reuse rate across diverse multi-agent workloads, including retrieval-augmented generation, math reasoning, and collaborative coding tasks, all without quality degradation. Particularly, when each fully-connected agent receives 1K input tokens with 512 prefix tokens and 512 output tokens under a five-agent setting, KVCOMM achieves up to 7.8x speedup compared to the standard prefill pipeline, reducing TTFT from ~430 ms to ~55 ms.

We address the challenge of efficient auto-regressive generation in sequence prediction models by introducing FutureFill - a method for fast generation that applies to any sequence prediction algorithm based on convolutional operators. Our approach reduces the generation time requirement from quadratic to quasilinear relative to the context length. Additionally, FutureFill requires a prefill cache sized only by the number of tokens generated, which is smaller than the cache requirements for standard convolutional and attention-based models. We validate our theoretical findings with experimental evidence demonstrating correctness and efficiency gains in a synthetic generation task.

Reinforcement mid-training lets language models learn internal thoughts from unlabeled text, but efficient token-level credit assignment remains challenging. Existing group-relative methods require costly repeated generation. Learned critics offer single-rollout feedback, but accurate return prediction alone does not ensure reliable policy updates. Our analysis shows how training--inference mismatch and PPO clipping prevent a common offset in advantage estimates from cancelling out, introducing additional update drift. We propose , a twin-critic method that calibrates token-level advantages from a single generated trajectory. After warmup and held-out qualification, the critics provide two advantage estimates, combined using action-dependent weights learned through a conditional-moment saddle-point objective. This objective brings the average advantage at each prefix toward zero, while a signal-retention constraint prevents the correction from erasing the learning signal. Sharing information across text positions avoids repeated sampling of each prefix. Theoretically, we characterize optimal mixing under the signal-retention constraint and establish an upper bound on residual mean-induced drift. Experiments show that, compared with the state-of-the-art critic-free method, improves mean benchmark performance by 7.8\% and reduces mean training-step time by up to 63.4\%.

As large language models (LLMs) are increasingly deployed with highly heterogeneous workloads, chunked-prefill execution has emerged as a mainstream serving architecture. Balancing scheduling fairness and latency stability in such environments is critical; otherwise, severe head-of-line blocking and request starvation will degrade user experience. However, existing systems rely on rigid First-Come, First-Served (FCFS) policies and static token budgets, leading to fairness degradation and unpredictable latency jitter. To address these issues, we propose a fairness-aware and latency-controllable scheduling framework for chunked-prefill LLM engines. Specifically, we design a lightweight aging-based scheduling policy that dynamically calculates priorities using accumulated waiting time and remaining prefill work. Furthermore, we develop Latency-Prediction-Based Request Scheduling (LPRS) and Active Prefill Control (APC) to replace static budgets with target-time constraints and actively regulate prefill concurrency. We evaluated our scheduling framework on NVIDIA GPUs and Ascend accelerators using real-world workloads. Results show the aging policy reduces mean end-to-end latency by over 10\% compared to FCFS. Moreover, LPRS and APC significantly reduce P99 tail latency and suppress prefill fragmentation, confirming that the structural prefill control and the temporal latency constraints are fundamentally complementary. All codes have been released in Github.

In multi-agent systems utilizing Large Language Models (LLMs), communication between agents traditionally relies on natural language. This communication often includes the full context of the query so far, which can introduce significant prefill-phase latency, especially with long contexts. We introduce DroidSpeak, a novel framework to target this cross-LLM communication by leveraging the reuse of intermediate data, such as input embeddings (E-cache) and key-value caches (KV-cache). We efficiently bypass the need to reprocess entire contexts for fine-tuned versions of the same foundational model. This approach allows faster context integration while maintaining the quality of task performance. Experimental evaluations demonstrate DroidSpeak's ability to significantly accelerate inter-agent communication, achieving up to a 2.78x speedup in prefill latency with negligible loss in accuracy. Our findings underscore the potential to create more efficient and scalable multi-agent systems.

Key-Value (KV) cache remains a major bottleneck for deploying Large Language Models (LLMs) in long-generation tasks. Prior work often applies uniform compression across both prefill and decoding caches, but compressing the prefill cache degrades performance by corrupting critical context. While preserving the prefill cache is essential, decoding-phase compression remains underexplored, with existing methods relying on rigid recency windows or instantaneous attention. Our analysis of attention dynamics reveals strong temporal patterns: critical tokens receive sustained attention over long horizons, while local reasoning involves short-lived bursts. Static heuristics fail to capture this behavior, leading to premature eviction of important tokens or retention of stale ones. We propose Moment-KV, a decoding-time KV cache compression method based on momentum-driven temporal attention aggregation. Our method models token importance as a continuously evolving state, where attention is aggregated with decay, capturing both long-term influence and recent relevance. Experiments show that Moment-KV significantly improves generation fidelity in long-generation tasks (2.3-3.2 %) while maintaining decoding latency.

Dense retrieval powers retrieval-augmented generation, semantic search, and question answering, yet the theoretical basis for choosing between shared and dual query-document projections remains unclear. We introduce a bias-variance theory for low-rank bilinear scoring. Shared projections induce positive-semidefinite operators, whereas dual projections realize arbitrary low-rank operators. We derive their exact approximation gap and prove a local Gaussian boundary: dual has lower risk exactly when squared directional signal exceeds the estimation cost of its additional degrees of freedom. This boundary motivates the Cross-fitted Asymmetry Risk Selector (CARS), which estimates reproducible directional signal from training pairs; its Gaussian counterpart admits exact selection-power and regret formulas. Guided by the theory, we run retrieval experiments across multiple datasets and embedding models. The mean Dual-minus-Shared NDCG@10 advantage more than doubles as query rotation increases from 0 degrees to 90 degrees. In the rank-sample-size grids, Shared wins 13 of 16 cells at n=32, whereas Dual wins all 32 cells at n=1024 and n=2048. Consistent with this shift, all 168 comparable operator-risk curves move toward Dual as training data grow. Compared to the two fixed-geometry baselines, CARS reduces held-out regret by 49-96% and achieves 90.1% mean geometry-selection accuracy.

Existing training-free approaches for GUI grounding often rely on multiple inference runs, such as iterative cropping or candidate aggregation, to identify target elements. Despite this additional computation, each forward pass still independently interprets the instruction and parses the visual layout, without enabling progressive interaction among visual tokens. In this paper, we study what happens during GUI grounding in Vision-Language Models (VLMs) and identify a previously overlooked bottleneck. We show that grounding follows a two-stage paradigm: the prefill stage determines candidate UI elements, while the decoding stage subsequently refines the final coordinates. This asymmetry establishes prefill as the critical step, as errors in candidate selection cannot be effectively corrected during decoding. Based on this observation, we propose Re-Prefill, a training-free method that revisits inference by introducing an attention-guided second prefill stage to refine target selection. Specifically, visual tokens that consistently receive high attention from the query position, i.e., the final token, across layers are extracted as a preliminary target hypothesis and appended to the input, together with the instruction hidden states, enabling the model to deeply re-think its decision before coordinate generation. Experiments across four VLMs and five benchmarks, including ScreenSpot-Pro, ScreenSpot-V2, OSWorld-G, UI-Vision, and MMBench-GUI, demonstrate consistent improvements without additional training, with gains of up to 4.3% on ScreenSpot-Pro. Code will be available at https://github.com/linjiaping1/Re-Prefill.

Autoregressive language models are least accurate at the beginning of a sequence, where little context forces reliance on a generic pretraining prior. We show that this cold-start penalty is domain dependent and reduce it with a domain-conditional position offset: a single learned vector added to the embedding activation at the first sequence positions while all model weights remain frozen. The offset trains in minutes on roughly one hundred documents, switches between domains without added sequence state, and has no measurable latency overhead. Across eight Mamba, GPT-NeoX, and Llama models spanning 410M to 8B parameters, it reduces held-out in-domain perplexity by up to 27%; the effect persists at 70B, and one position captures most of the benefit. A matched, converged direct logit-bias correction reaches at most only 7.9% and leaves later-token loss unchanged, showing that the offset propagates through model state rather than merely recalibrating the output prior. A tuned LoRA reaches lower perplexity but uses two to three orders of magnitude more parameters and an active low-rank weight path, while soft prompts add sequence positions. With wrong-domain controls, offsets improve retrieval reranking and domain classification when decisions depend on early in-domain tokens, For the few-shot reasoning whose signal occurs later, the results maintains unchanged. Position-aware prefill application also help generation tasks, whereas naive application at every cached decoding step causes repetition. The offset is therefore not the strongest adapter, but a lightweight, hot switchable tool for short in-domain scoring and calibration.

Long-context prefill in large language models (LLMs) incurs substantial computation and memory traffic because dense self-attention computes quadratic query-key scores. Existing methods either use a uniform low-precision path or select token interactions, leaving spatial precision routing over hardware-aligned score tiles outside fused dense attention. We introduce TileMix, a tile-centric precision-routing kernel that makes numerical precision an executable spatial decision over score-tile groups within fused dense attention. TileMix partitions the attention matrix into hardware-aligned score tiles, packs routing decisions into compact bitmasks, and dispatches each tile group through FP16 or INT8 score computation while both paths update a shared online-softmax state. Scalable precision grouping lets each routing bit govern multiple adjacent key tiles, preserving hardware-aligned compute tiles and compact metadata at long contexts. By routing all legal tile groups, TileMix preserves dense token connectivity, requires no training, and supports grouped-query attention, variable-length batches, and INT8 key/value caches. Across LongEval, LV-Eval, and A100 prefill benchmarks on LLaMA, Qwen, and Vicuna, TileMix recovers long-context quality lost under uniform INT8 and improves prefill throughput over FP16, yielding a controllable accuracy-efficiency frontier across model families. The implementation is available at https://github.com/HanzhiZhang-Ulrica/TileMix.

Language model training in distributed settings is limited by the communication cost of gradient exchanges. In this short note, we extend recent work from Malladi et al. (2023), using shared randomness to perform distributed fine-tuning with low bandwidth. The method is a natural decentralized extension of memory-efficient Simultaneous Perturbation Stochastic Approximation (SPSA). Each iteration, each machine seeds a Random Number Generator (RNG) to perform local reproducible perturbations on model weights and calculate and exchange scalar projected gradients, which are then used to update each model. By using a (machine, sample) identifier as the random seed, each model can regenerate one another's perturbations. As machines only exchange single-byte projected gradients, this is highly communication efficient. There are also potential privacy benefits, as projected gradients may be calculated on different training data, and models never access the other's data. Our approach not only drastically reduces communication bandwidth requirements but also accommodates dynamic addition or removal of machines during the training process and retains the memory-efficient and inference-only advantages of recent work. We perform proof-of-concept experiments to demonstrate the potential usefulness of this method, building off of rich literature on distributed optimization and memory-efficient training.

We present context parallelism for long-context large language model inference, which achieves near-linear scaling for long-context prefill latency with up to 128 H100 GPUs across 16 nodes. Particularly, our method achieves 1M context prefill with Llama3 405B model in 77s (93% parallelization efficiency, 63% FLOPS utilization) and 128K context prefill in 3.8s. We develop two lossless exact ring attention variants: pass-KV and pass-Q to cover a wide range of use cases with the state-of-the-art performance: full prefill, persistent KV prefill and decode. Benchmarks on H100 GPU hosts inter-connected with RDMA and TCP both show similar scalability for long-context prefill, demonstrating that our method scales well using common commercial data center with medium-to-low inter-host bandwidth.

As large language models serve ever more requests, cumulative inference cost is growing relative to the one-time cost of training. In typical serving, prompt prefill runs in parallel and is compute-bound, whereas autoregressive decode is sequential and memory-traffic-bound. Conventional width or depth scaling raises both costs together, since every added layer is evaluated in both phases and enlarges the weights read at each decode step. We instead ask whether additional learned computation can be allocated to continuation prediction while preserving prompt-wide primary computation and a single KV cache. We realize this with the Decode-Branch Transformer. Its primary path alone processes the prompt and writes the KV cache; the decode branch is omitted during prefill and activated only from the final prompt position onward, adding continuation computation without writing state or affecting the primary path. The paths share attention, MLP, and output matrices, using separate token embeddings with lightweight coupling. Grouped decode reuses loaded weight tiles and the primary KV cache across both paths, so the added arithmetic does not proportionally increase dominant memory traffic or decode latency. Across matched-token comparisons, Decode-Branch achieves lower validation loss across architectures and data settings. In MoE models, the primary and branch expert fan-outs become independent knobs for trading prompt cost, decode cost, and predictive quality. We study two expert-allocation regimes, holding prefill or decode computation fixed, and expose a prefill-decode-quality trade-off enabled by phase-specific expert allocation.

The rapid scaling of large language models necessitates more lightweight finetuning methods to reduce the explosive GPU memory overhead when numerous customized models are served simultaneously. Targeting more parameter-efficient low-rank adaptation (LoRA), parameter sharing presents a promising solution. Empirically, our research into high-level sharing principles highlights the indispensable role of differentiation in reversing the detrimental effects of pure sharing. Guided by this finding, we propose Mixture of Shards (MoS), incorporating both inter-layer and intra-layer sharing schemes, and integrating four nearly cost-free differentiation strategies, namely subset selection, pair dissociation, vector sharding, and shard privatization. Briefly, it selects a designated number of shards from global pools with a Mixture-of-Experts (MoE)-like routing mechanism before sequentially concatenating them to low-rank matrices. Hence, it retains all the advantages of LoRA while offering enhanced parameter efficiency, and effectively circumvents the drawbacks of peer parameter-sharing methods. Our empirical experiments demonstrate approximately 8x parameter savings in a standard LoRA setting. The ablation study confirms the significance of each component. Our insights into parameter sharing and MoS method may illuminate future developments of more parameter-efficient finetuning methods.

Recent work on speech representation models jointly pre-trained with text has demonstrated the potential of improving speech representations by encoding speech and text in a shared space. In this paper, we leverage such shared representations to address the persistent challenge of limited data availability in spoken language understanding tasks. By employing a pre-trained speech-text model, we find that models fine-tuned on text can be effectively transferred to speech testing data. With as little as 1 hour of labeled speech data, our proposed approach achieves comparable performance on spoken language understanding tasks (specifically, sentiment analysis and named entity recognition) when compared to previous methods using speech-only pre-trained models fine-tuned on 10 times more data. Beyond the proof-of-concept study, we also analyze the latent representations. We find that the bottom layers of speech-text models are largely task-agnostic and align speech and text representations into a shared space, while the top layers are more task-specific.

Monolithic serving with chunked prefill improves GPU utilization by batching prefill and decode together, but suffers from fine-grained phase interference. Engine-level prefill-decode (PD) disaggregation avoids interference but incurs higher hardware and coordination overhead. Prior intra-GPU disaggregation approaches multiplex prefill and decode within a single GPU, using SLO-based tuning guided by heuristics from offline profiling or reactive feedback loops. However, these methods respond reactively to performance issues rather than anticipating them, limiting adaptability under dynamic workloads. We ask: can we achieve proactive intra-GPU disaggregation that adapts effectively to dynamic workloads? The key challenge lies in managing the conflicting resource demands of prefill and decode under varying conditions. We first show that GPU resources exhibit diminishing returns -- beyond a saturation point, more allocation yields minimal latency benefit. Second, we observe that memory bandwidth contention becomes a critical bottleneck. These insights motivate a design that dynamically partitions GPU resources across prefill and decode phases, while jointly considering compute capacity, memory footprint, and bandwidth contention. Evaluated on diverse LLMs and workloads, our system Nexus achieves up to 2.2x higher throughput, 20x lower TTFT, and 2.5x lower TBT than vLLM; outperforms SGLang by up to 2x; and matches or exceeds disaggregated vLLM.

Large Language Models (LLMs) are increasingly used as chatbots, yet their ability to personalize responses to user preferences remains limited. We introduce PrefEval, a benchmark for evaluating LLMs' ability to infer, memorize and adhere to user preferences in a long-context conversational setting. PrefEval comprises 3,000 manually curated user preference and query pairs spanning 20 topics. PrefEval contains user personalization or preference information in both explicit and implicit forms, and evaluates LLM performance using a generation and a classification task. With PrefEval, we evaluated the aforementioned preference following capabilities of 10 open-source and proprietary LLMs in multi-session conversations with varying context lengths up to 100k tokens. We benchmark with various prompting, iterative feedback, and retrieval-augmented generation methods. Our benchmarking effort reveals that state-of-the-art LLMs face significant challenges in proactively following users' preferences during conversations. In particular, in zero-shot settings, preference following accuracy falls below 10% at merely 10 turns (~3k tokens) across most evaluated models. Even with advanced prompting and retrieval methods, preference following still deteriorates in long-context conversations. Furthermore, we show that fine-tuning on PrefEval significantly improves performance. We believe PrefEval serves as a valuable resource for measuring, understanding, and enhancing LLMs' preference following abilities, paving the way for personalized conversational agents. Our code and dataset are available at https://prefeval.github.io/.

How fast does a language model degrade when trained on its own outputs? Theory traces it to gradually accumulating errors, while experiments report repeated phrases within ten generations. Under a fixed sampling seed in vLLM, the fast loss of lexical diversity comes from the sampler. When vLLM serves a batch from one seeded sampling configuration, every request receives the same random draws, and a fixed seed replays them every generation. Fine-tuning raises the tokens that won, and the replayed draws let them win by more. Sharing across requests and replay across generations matter only together. Remove either one, by changing the shared seed every generation or by giving each request its own seed that repeats every generation, and the unique-4-gram fraction of two StableLM checkpoints stays near its starting value of about 0.98 through generation 3. Keep both, and the replayed shared seed takes seven checkpoints from five families to between 0.045 and 0.38 by then. Three generations of replay write the favoured phrases into the weights: decoded with one seed per request, the generation-3 weights of the replayed StableLM-2-1.6B chain recover most of their diversity, yet the phrase that filled every sample under the shared seed still opens 46% of them. Without replay, five checkpoints drift slowly, consistent with the gradual accumulation that theory describes, and three turn incoherent though their diversity scores stay high. One peer-reviewed model-collapse pipeline that fine-tunes Gemma-2-27B samples identical prompts under one seeded configuration, and three quarters of the rows it released for one iteration repeat nearly as often as one such batch copies them. A seed per request restores the fresh sample that stability analyses assume.

For a long time, different recommendation tasks typically require designing task-specific architectures and training objectives. As a result, it is hard to transfer the learned knowledge and representations from one task to another, thus restricting the generalization ability of existing recommendation approaches, e.g., a sequential recommendation model can hardly be applied or transferred to a review generation method. To deal with such issues, considering that language can describe almost anything and language grounding is a powerful medium to represent various problems or tasks, we present a flexible and unified text-to-text paradigm called "Pretrain, Personalized Prompt, and Predict Paradigm" (P5) for recommendation, which unifies various recommendation tasks in a shared framework. In P5, all data such as user-item interactions, user descriptions, item metadata, and user reviews are converted to a common format -- natural language sequences. The rich information from natural language assists P5 to capture deeper semantics for personalization and recommendation. Specifically, P5 learns different tasks with the same language modeling objective during pretraining. Thus, it serves as the foundation model for various downstream recommendation tasks, allows easy integration with other modalities, and enables instruction-based recommendation based on prompts. P5 advances recommender systems from shallow model to deep model to big model, and will revolutionize the technical form of recommender systems towards universal recommendation engine. With adaptive personalized prompt for different users, P5 is able to make predictions in a zero-shot or few-shot manner and largely reduces the necessity for extensive fine-tuning. On several recommendation benchmarks, we conduct experiments to show the effectiveness of P5. We release the source code at https://github.com/jeykigung/P5.

The prefill stage of long-context Retrieval-Augmented Generation (RAG) is severely bottlenecked by computational overhead. To mitigate this, recent methods assemble pre-calculated KV caches of retrieved RAG documents (by a user query) and reprocess selected tokens to recover cross-attention between these pre-calculated KV caches. However, we identify a fundamental "crowding-out effect" in current token selection criteria: globally salient but user-query-irrelevant tokens saturate the limited recomputation budget, displacing the tokens truly essential for answering the user query and degrading inference accuracy. We propose ProphetKV, a user-query-driven KV Cache reuse method for RAG scenarios. ProphetKV dynamically prioritizes tokens based on their semantic relevance to the user query and employs a dual-stage recomputation pipeline to fuse layer-wise attention metrics into a high-utility set. By ensuring the recomputation budget is dedicated to bridging the informational gap between retrieved context and the user query, ProphetKV achieves high-fidelity attention recovery with minimal overhead. Our extensive evaluation results show that ProphetKV retains 96%-101% of full-prefill accuracy with only a 20% recomputation ratio, while achieving accuracy improvements of 8.8%-24.9% on RULER and 18.6%-50.9% on LongBench over the state-of-the-art approaches (e.g., CacheBlend, EPIC, and KVShare).

In prefill-decode (PD) disaggregated LLM serving, each request is assigned to a decode worker after prefill. Existing decode routers balance only load; for mixture-of-experts (MoE) models this is incomplete: equally loaded workers can differ in latency, since each decode step loads the weights of every distinct expert its batch activates. We present ELDR, an expert-locality-aware decode router for PD-disaggregated MoE serving. From a request's prefill expert activations, ELDR builds an expert signature predicting the experts it will activate during generation. Offline, balanced K-means partitions signature space across decode workers; online, locality-band routing sends each request to the least-loaded worker among those best matching its signature. A signature cache, co-indexed with the KV cache at KV-block granularity, keeps signatures exact under prefix caching. Implemented in vLLM and evaluated on deployments of up to 40 GPUs, ELDR reduces median TPOT by 5.9-13.9% over the strongest of four load-balancing baselines across three MoE models and two workloads, with model outputs unchanged.

This paper explores the image-sharing capability of Large Language Models (LLMs), such as InstructGPT, ChatGPT, and GPT-4, in a zero-shot setting, without the help of visual foundation models. Inspired by the two-stage process of image-sharing in human dialogues, we propose a two-stage framework that allows LLMs to predict potential image-sharing turns and generate related image descriptions using our effective restriction-based prompt template. With extensive experiments, we unlock the image-sharing capability of LLMs in zero-shot prompting, with GPT-4 achieving the best performance. Additionally, we uncover the emergent image-sharing ability in zero-shot prompting, demonstrating the effectiveness of restriction-based prompts in both stages of our framework. Based on this framework, we augment the PhotoChat dataset with images generated by Stable Diffusion at predicted turns, namely PhotoChat++. To our knowledge, this is the first study to assess the image-sharing ability of LLMs in a zero-shot setting without visual foundation models. The source code and the dataset will be released after publication.

Adapting pre-trained models with broad capabilities has become standard practice for learning a wide range of downstream tasks. The typical approach of fine-tuning different models for each task is performant, but incurs a substantial memory cost. To efficiently learn multiple downstream tasks we introduce Task Adaptive Parameter Sharing (TAPS), a general method for tuning a base model to a new task by adaptively modifying a small, task-specific subset of layers. This enables multi-task learning while minimizing resources used and competition between tasks. TAPS solves a joint optimization problem which determines which layers to share with the base model and the value of the task-specific weights. Further, a sparsity penalty on the number of active layers encourages weight sharing with the base model. Compared to other methods, TAPS retains high accuracy on downstream tasks while introducing few task-specific parameters. Moreover, TAPS is agnostic to the model architecture and requires only minor changes to the training scheme. We evaluate our method on a suite of fine-tuning tasks and architectures (ResNet, DenseNet, ViT) and show that it achieves state-of-the-art performance while being simple to implement.

In the realm of large multi-modal models (LMMs), efficient modality alignment is crucial yet often constrained by the scarcity of high-quality image-text data. To address this bottleneck, we introduce the ShareGPT4V dataset, a pioneering large-scale resource featuring 1.2 million highly descriptive captions, which surpasses existing datasets in diversity and information content, covering world knowledge, object properties, spatial relationships, and aesthetic evaluations. Specifically, ShareGPT4V originates from a curated 100K high-quality captions collected from advanced GPT4-Vision and has been expanded to 1.2M with a superb caption model trained on this subset. ShareGPT4V first demonstrates its effectiveness for the Supervised Fine-Tuning (SFT) phase, by substituting an equivalent quantity of detailed captions in existing SFT datasets with a subset of our high-quality captions, significantly enhancing the LMMs like LLaVA-7B, LLaVA-1.5-13B, and Qwen-VL-Chat-7B on the MME and MMBench benchmarks, with respective gains of 222.8/22.0/22.3 and 2.7/1.3/1.5. We further incorporate ShareGPT4V data into both the pre-training and SFT phases, obtaining ShareGPT4V-7B, a superior LMM based on a simple architecture that has remarkable performance across a majority of the multi-modal benchmarks. This project is available at https://ShareGPT4V.github.io to serve as a pivotal resource for advancing the LMMs community.

Recently, sharing key-value (KV) cache across layers has been found effective in efficient inference of large language models (LLMs). To systematically investigate different techniques of cross-layer KV sharing, we propose a unified framework that covers several recent methods and their novel variants. We conduct comprehensive experiments on all the configurations of the framework, evaluating their generation throughput and performance in language modeling and downstream tasks. We find that when reducing the size of the KV cache by 2x, most configurations can achieve competitive performance to and higher throughput than standard transformers, but when further reducing the size of the KV cache, pairing queries of all layers with KVs of upper layers can better maintain performance, although it also introduces additional training cost and prefilling latency. We hope that this work will help users choose the appropriate approach according to their requirements and facilitate research on the acceleration of LLM inference.

Speculative decoding is critical for accelerating LLM inference. However, the speedup is fragile: drafters are typically trained against a narrow distribution for a single target model, and their acceptance rate collapses under workload shifts. This is a striking inversion of modern LLM development, where target models are valued precisely for the broad generalization they acquire through large-scale pretraining. We argue that the natural remedy, pretraining, has been hard to apply to drafters because existing recipes are target-specific: the drafter consumes the target's hidden states and is distilled on the target's logits, so pretraining must be repeated for each target. We introduce Osprey, which instead bootstraps drafters from off-the-shelf pretrained small language models, treating broad pretraining as a reusable, target-agnostic asset and reducing per-target work to a lightweight adaptation step. Realizing this requires overcoming two challenges: small LMs are far deeper than a latency-bound drafter can afford, and their pretrained computation must remain intact while the drafter learns to ingest target hidden states and emit tokens in the target's vocabulary. Osprey addresses both by pruning to a shallow backbone, restoring its language-modeling capability with target-agnostic next-token pretraining, and adapting it to each target through vocabulary alignment, zero-initialized QKV expansion, and distillation from the target model's output distribution. Empirically, a single pretrained Osprey backbone transfers across targets and improves mean acceptance length by 16.1% for Qwen3-8B, 21.2% for Llama-3.3-70B-Instruct, and 22.7% for the 229B MiniMax-M2.5 (with 17.5% higher tokens per second), with the largest gains on out-of-domain and multilingual data. Our code is available at https://github.com/LeanModels/Osprey.

The current modus operandi in NLP involves downloading and fine-tuning pre-trained models consisting of millions or billions of parameters. Storing and sharing such large trained models is expensive, slow, and time-consuming, which impedes progress towards more general and versatile NLP methods that learn from and for many tasks. Adapters -- small learnt bottleneck layers inserted within each layer of a pre-trained model -- ameliorate this issue by avoiding full fine-tuning of the entire model. However, sharing and integrating adapter layers is not straightforward. We propose AdapterHub, a framework that allows dynamic "stitching-in" of pre-trained adapters for different tasks and languages. The framework, built on top of the popular HuggingFace Transformers library, enables extremely easy and quick adaptations of state-of-the-art pre-trained models (e.g., BERT, RoBERTa, XLM-R) across tasks and languages. Downloading, sharing, and training adapters is as seamless as possible using minimal changes to the training scripts and a specialized infrastructure. Our framework enables scalable and easy access to sharing of task-specific models, particularly in low-resource scenarios. AdapterHub includes all recent adapter architectures and can be found at https://AdapterHub.ml.

We present a novel method for Efficient training with Progressive Activation Sharing (EPAS). This method bridges progressive training paradigm with the phenomenon of redundant QK (or KV ) activations across deeper layers of transformers. EPAS gradually grows a sharing region during training by switching decoder layers to activation sharing mode. This results in throughput increase due to reduced compute. To utilize deeper layer redundancy, the sharing region starts from the deep end of the model and grows towards the shallow end. The EPAS trained models allow for variable region lengths of activation sharing for different compute budgets during inference. Empirical evaluations with QK activation sharing in LLaMA models ranging from 125M to 7B parameters show up to an 11.1% improvement in training throughput and up to a 29% improvement in inference throughput while maintaining similar loss curve to the baseline models. Furthermore, applying EPAS in continual pretraining to transform TinyLLaMA into an attention-sharing model yields up to a 10% improvement in average accuracy over state-of-the-art methods, emphasizing the significance of progressive training in cross layer activation sharing models.

Production deployments often swap between different-sized models in a family for cost-quality cascading, mid-conversation switching, and routing, and each swap forces the receiver to repay the prefill from scratch. We propose cross-model KV cache transfer, where the receiver reuses the source's KV cache, skipping prefill. We find that cross-model KV has substantial linear structure across matched-KV pairs, where source and target share KV head count and per-head dimension. On Qwen3 14B->32B, one source layer explains 56% of variance in the target's keys and 32% in values, rising to 79% and 65% with multiple source layers. Building on this, we design a closed-form ridge mapper that operates per head and proceeds in three steps. First, for each target layer we select the top-k most predictive source layers and concatenate their KV as input. Second, we strip RoPE from the keys before mapping, so the fit is position-free and reusable across context lengths. Third, we fit ridge regression on a small calibration set of 500 FineWeb-Edu sequences of 1,024 tokens each. Surprisingly, across six pairs in three families, this linear mapper retains 73-98% of the receiver's standalone-prefill accuracy on four pairs, while two degrade sharply. A nonlinear MLP recovers up to +37 pp HellaSwag retention on the failures. The mapper runs 2.7-25x faster than re-prefill and remains stable across multi-turn handoff, making cross-model KV cache transfer practical.

Speculative decoding accelerates inference by using a lightweight draft model to generate candidate tokens in parallel, and are then verified by the target model, enabling lossless acceleration. Recently, diffusion-based speculative decoding further improves parallelism by generating multiple tokens per forward pass via block-level diffusion, achieving state-of-the-art (SOTA) performance. However, existing methods adopt a fixed inference block size and assume a uniform optimal decoding strategy across all inputs. In this paper, we show that this assumption is suboptimal, as the optimal block size varies across samples and plays a critical role in speculative decoding performance. Moreover, these values exhibit a clear local structure, concentrating around the training block size, which reduces the problem to a low-dimensional and structured decision space. Based on these insights, we propose BlockPilot, a sample-adaptive policy that predicts the optimal block size from the prefilling representation. Specifically, we formulate block size selection as a lightweight policy learning problem and propose an instance-adaptive decision mechanism that predicts the optimal block size based on the representation of the prefilling stage. The prediction is performed only once after prefilling, allowing for seamless integration. Extensive experiments demonstrate that our method is plug-and-play, introduces minimal overhead, and consistently improves efficiency, achieving an acceptance length of 5.92 and a 4.20times speedup on Qwen3-4B under temperature T=1.

Retrieval-augmented generation (RAG) improves large language model (LLM) answer quality by grounding generation in external evidence, but processing retrieved contexts makes the prefill stage a dominant serving cost. RAG cache fusion reduces this cost by reusing precomputed key-value (KV) caches for retrieved chunks and selectively recomputing tokens under the current prompt. Existing selectors, however, face a dilemma between quality and efficiency: fast query-agnostic or final-layer query-to-context selectors can miss request-relevant evidence, whereas full-view query-aware selectors require broad context and layer visibility before recomputation and therefore stall the layer-wise cache-fusion pipeline. We present QCFuse, a compressed-view query-aware selector for RAG cache fusion. QCFuse uses chunk-anchor query probing to condition user-query states on compact per-chunk anchors and critical-layer profiling to identify recomputation tokens without all-layer inspection. We implement QCFuse in SGLang and evaluate it on four open-weight LLMs across six datasets. QCFuse reaches full-prefill-level quality. At matched quality, QCFuse achieves an average prefill-time speedup of 1.7x over full prefill and 1.5x over ProphetKV, the strongest quality-preserving baseline.

Long-context Multimodal Large Language Models (MLLMs) demand substantial computational resources for inference as the growth of their multimodal Key-Value (KV) cache, in response to increasing input lengths, challenges memory and time efficiency. Unlike single-modality LLMs that manage only textual contexts, the KV cache of long-context MLLMs includes representations from multiple images with temporal and spatial relationships and related textual contexts. The predominance of image tokens means traditional optimizations for LLMs' KV caches are unsuitable for multimodal long-context settings, and no prior works have addressed this challenge. In this work, we introduce LOOK-M, a pioneering, fine-tuning-free approach that efficiently reduces the multimodal KV cache size while maintaining performance comparable to a full cache. We observe that during prompt prefill, the model prioritizes more textual attention over image features, and based on the multimodal interaction observation, a new proposed text-prior method is explored to compress the KV cache. Furthermore, to mitigate the degradation of image contextual information, we propose several compensatory strategies using KV pairs merging. LOOK-M demonstrates that with a significant reduction in KV Cache memory usage, such as reducing it by 80% in some cases, it not only achieves up to 1.5x faster decoding but also maintains or even enhances performance across a variety of long context multimodal tasks.

The quadratic complexity of self-attention during the prefill phase impedes long-context inference in large language models. Existing sparse attention methods face a trade-off among context adaptivity, sampling overhead, and fine-tuning costs. We propose VSPrefill, a mechanism requiring lightweight training that uses the vertical-slash structural pattern in attention distributions. Our compact VSIndexer module predicts context-aware importance scores for vertical columns and slash diagonals from key-value representations augmented with RoPE. This approach constructs sparse masks with linear complexity without modifying the backbone parameters. During inference, an adaptive cumulative-threshold strategy allocates sparsity budgets per layer, while a fused kernel executes attention with on-the-fly index merging. Evaluated on Qwen3-4B-Instruct and LLaMA-3.1-8B-Instruct across the LongBench and RULER benchmarks, VSPrefill preserves 98.35% of the full attention accuracy while delivering a 4.95x average speedup at a context length of 128k. These results establish a new Pareto frontier in the trade-off between accuracy and efficiency.

Conventional Sequential Recommender Systems (SRS) typically assign unique Hash IDs (HID) to construct item embeddings. These HID embeddings effectively learn collaborative information from historical user-item interactions, making them vulnerable to situations where most items are rarely consumed (the long-tail problem). Recent methods that incorporate auxiliary information often suffer from noisy collaborative sharing caused by co-occurrence signals or semantic homogeneity caused by flat dense embeddings. Semantic IDs (SIDs), with their capability of code sharing and multi-granular semantic modeling, provide a promising alternative. However, the collaborative overwhelming phenomenon hinders the further development of SID-based methods. The quantization mechanisms commonly compromise the uniqueness of identifiers required for modeling head items, creating a performance seesaw between head and tail items. To address this dilemma, we propose \name, a novel framework that harmonizes the SID and HID. Specifically, we devise a dual-branch modeling architecture that enables the model to capture both the multi-granular semantics within SID while preserving the unique collaborative identity of HID. Furthermore, we introduce a dual-level alignment strategy that bridges the two representations, facilitating knowledge transfer and supporting robust preference modeling. Extensive experiments on three real-world datasets show that \name~ effectively balances recommendation quality for both head and tail items while surpassing the existing baselines. The implementation code can be found onlinehttps://github.com/ziwliu8/H2Rec.

Shared memories between two individuals strengthen their bond and are crucial for facilitating their ongoing conversations. This study aims to make long-term dialogue more engaging by leveraging these shared memories. To this end, we introduce a new long-term dialogue dataset named SHARE, constructed from movie scripts, which are a rich source of shared memories among various relationships. Our dialogue dataset contains the summaries of persona information and events of two individuals, as explicitly revealed in their conversation, along with implicitly extractable shared memories. We also introduce EPISODE, a long-term dialogue framework based on SHARE that utilizes shared experiences between individuals. Through experiments using SHARE, we demonstrate that shared memories between two individuals make long-term dialogues more engaging and sustainable, and that EPISODE effectively manages shared memories during dialogue. Our new dataset is publicly available at https://anonymous.4open.science/r/SHARE-AA1E/SHARE.json.

Recent years have seen remarkable progress of text generation in different contexts, such as the most common setting of generating text from scratch, and the emerging paradigm of retrieval-and-rewriting. Text infilling, which fills missing text portions of a sentence or paragraph, is also of numerous use in real life, yet is under-explored. Previous work has focused on restricted settings by either assuming single word per missing portion or limiting to a single missing portion to the end of the text. This paper studies the general task of text infilling, where the input text can have an arbitrary number of portions to be filled, each of which may require an arbitrary unknown number of tokens. We study various approaches for the task, including a self-attention model with segment-aware position encoding and bidirectional context modeling. We create extensive supervised data by masking out text with varying strategies. Experiments show the self-attention model greatly outperforms others, creating a strong baseline for future research.

Diffusion large language models (dLLMs) re-encode the entire prefix at every denoising step, causing recomputation that scales quadratically with context length and becomes prohibitive for long-context scenarios. We propose Prefilling-dLLM, a training-free prefill-decode disaggregation framework for dLLMs that partitions the prefix into N chunks, caches their KV representations once, and selects the top-K most relevant chunks with intra-chunk token sparsity for decoding, showing that sparse prefilling can outperform dense attention while reducing per-step complexity from quadratic in the full sequence length to quadratic only in the decode length. On LongBench and InfiniteBench, Prefilling-dLLM achieves state-of-the-art quality among dLLM acceleration methods, and an attention kernel that parallelizes decoding over the non-contiguously cached chunk KV yields 9.1--28.0x speedup at 8K--32K contexts. We further show that beginning-of-sequence tokens prepended to each chunk act as periodic attention anchors that eliminate the lost-in-the-middle phenomenon. Code is available at https://github.com/menik1126/Prefilling-dLLM.

Large language model (LLM) agents repeatedly load reusable content, such as skills, documents, and memory entries, into the current context. Re-encoding this content for every request wastes computation. Position-independent caching (PIC) alleviates this by encoding each artifact independently and reusing its key-value (KV) states at arbitrary positions, but it incurs a quality loss relative to full-context prefill. Existing methods repair this loss by restoring global position IDs or recomputing selected tokens. In this work, we isolate the source of the loss, finding that the positional mismatch has minor effect, and independently cached artifacts retain faithful representations: reading a provided artifact stays largely accurate, and performance degrades only when the model must select among multiple artifacts. Moreover, replacing PIC's attention scores with full-prefill scores recovers performance with the cached KV unchanged, localizing the failure to the attention rather than KV recomputation. Motivated by this, we propose Attuner, a query-side adaptation method that learns to read a frozen artifact cache. Attuner inserts low-rank adapters into the query projections and is trained by distilling full-prefill distribution into the student. It trains fewer than 0.05\% of the model parameters and, at inference, requires neither cache recomputation nor a full-context reference. On Qwen3-4B and Qwen3-8B across seven benchmarks covering skills, documents, memory, and code, Attuner substantially outperforms prior PIC baselines in both in-domain and out-of-domain settings, matches full-context prefill quality while providing up to 3.73times speedup.

We present Key-Value Means ("KVM"), a novel block-recurrence for attention that can accommodate either fixed-size or growing state. Equipping a strong transformer baseline with fixed-size KVM attention layers yields a strong O(N) chunked RNN, while adding only an insignificant number of new parameters. We train a transformer with a growable KVM cache and show it performs competitively on long-context tests with only subquadratic prefill time and sublinear state growth. KVM is implementable with standard operations and without custom kernels, and supports chunk-wise parallelizable training and prefill. It provides many of the benefits of both traditional transformers (expandable context memory, chunk-wise parallelizable training and prefill) and linear RNNs in a single unified package. It can be used on every layer, saving KV-cache memory, and allowing a continuous range of choices of prefill time complexity between O(N) and O(N^2). It can also be implemented in a hybrid solution in tandem with LRNN layers in place of traditional attention, to supplement the LRNN with improved sublinear memory growth context length usage and long context decoding. We release our code at https://github.com/recursal/KVM-paper and trained models at https://huggingface.co/collections/recursal/key-value-means under the Apache 2.0 license.

Pre-trained Transformers (\eg BERT) have been commonly used in existing dense retrieval methods for parameter initialization, and recent studies are exploring more effective pre-training tasks for further improving the quality of dense vectors. Although various novel and effective tasks have been proposed, their different input formats and learning objectives make them hard to be integrated for jointly improving the model performance. In this work, we aim to unify a variety of pre-training tasks into the bottlenecked masked autoencoder manner, and integrate them into a multi-task pre-trained model, namely MASTER. Concretely, MASTER utilizes a shared-encoder multi-decoder architecture that can construct a representation bottleneck to compress the abundant semantic information across tasks into dense vectors. Based on it, we integrate three types of representative pre-training tasks: corrupted passages recovering, related passages recovering and PLMs outputs recovering, to characterize the inner-passage information, inter-passage relations and PLMs knowledge. Extensive experiments have shown that our approach outperforms competitive dense retrieval methods. Our code and data are publicly released in https://github.com/microsoft/SimXNS.

Key-Value (KV) cache has become a bottleneck of LLMs for long-context generation. Despite the numerous efforts in this area, the optimization for the decoding phase is generally ignored. However, we believe such optimization is crucial, especially for long-output generation tasks based on the following two observations: (i) Excessive compression during the prefill phase, which requires specific full context impairs the comprehension of the reasoning task; (ii) Deviation of heavy hitters occurs in the reasoning tasks with long outputs. Therefore, SCOPE, a simple yet efficient framework that separately performs KV cache optimization during the prefill and decoding phases, is introduced. Specifically, the KV cache during the prefill phase is preserved to maintain the essential information, while a novel strategy based on sliding is proposed to select essential heavy hitters for the decoding phase. Memory usage and memory transfer are further optimized using adaptive and discontinuous strategies. Extensive experiments on LongGenBench show the effectiveness and generalization of SCOPE and its compatibility as a plug-in to other prefill-only KV compression methods.

Deep convolutional neural networks (DCNNs) have become the state-of-the-art (SOTA) approach for many computer vision tasks: image classification, object detection, semantic segmentation, etc. However, most SOTA networks are too large for edge computing. Here, we suggest a simple way to reduce the number of trainable parameters and thus the memory footprint: sharing kernels between multiple convolutional layers. Kernel-sharing is only possible between ``isomorphic" layers, i.e.layers having the same kernel size, input and output channels. This is typically the case inside each stage of a DCNN. Our experiments on CIFAR-10 and CIFAR-100, using the ConvMixer and SE-ResNet architectures show that the number of parameters of these models can drastically be reduced with minimal cost on accuracy. The resulting networks are appealing for certain edge computing applications that are subject to severe memory constraints, and even more interesting if leveraging "frozen weights" hardware accelerators. Kernel-sharing is also an efficient regularization method, which can reduce overfitting. The codes are publicly available at https://github.com/AlirezaAzadbakht/kernel-sharing.

Looped Transformers apply the same layers several times per token, adding compute to improve quality without more parameters. Each recursion, however, writes its own key-value cache, so memory still grows with compute. Inference-time techniques can shrink this cache at a cost in quality. We pretrain looped language models to share memory: only the first recursion writes a cache, and later recursions read it while keeping a short window of their own. Surprisingly, we find that sharing memory does not cost quality and instead improves it. At 150M-1B parameters, our Looped Prediction Transformer (LPT) and its hybrid variant set a new quality-memory frontier for looped models: with five recursions, the hybrid lowers validation perplexity on FineWeb-Edu by 1.12-1.82 relative to a same-size standard Transformer while using 76-79% less context memory. Through an extensive analysis, we investigate why memory sharing helps. Shared and local memory develop different representations, and later recursions attend mostly to the shared memory, which also acts as a gradient highway to the first recursion.

Context retrieval systems for LLM inference face a critical challenge: high retrieval latency creates a fundamental tension between waiting for complete context (poor time-to-first-token) and proceeding without it (reduced quality). Streaming context incrementally--overlapping retrieval with inference--can mitigate this latency, but doing so with concurrent requests introduces new challenges: requests contend for GPU compute and memory, and scheduling must adapt to dynamic context arrivals. We present Stream2LLM, a streaming-aware LLM serving system for concurrent prefill-decode disaggregated deployments. Stream2LLM introduces adaptive scheduling and preemption for two distinct retrieval patterns: append-mode (progressive context accumulation) and update-mode (iterative refinement with cache invalidation). It decouples scheduling decisions from resource acquisition, enabling flexible preemption strategies guided by hardware-specific cost models, and uses longest common prefix matching to minimize redundant computation when input changes dynamically. To evaluate Stream2LLM, we collect two large-scale, real-world streaming workloads based on web crawling and approximate nearest neighbor search. Our evaluation demonstrates that streaming architecture delivers up to 11x TTFT improvements, with cost-aware scheduling providing critical benefits under memory pressure, all while maintaining throughput parity with non-streaming baselines. Code: https://github.com/rajveerb/stream2llm/tree/mlsys_artifact

Serving transformer language models with high throughput requires caching Key-Values (KVs) to avoid redundant computation during autoregressive generation. The memory footprint of KV caching is significant and heavily impacts serving costs. This work proposes to lessen these memory requirements. While recent work has largely addressed KV cache reduction via compression and eviction along the temporal axis, we argue that the depth dimension offers an orthogonal and robust avenue for optimization. Although prior research suggests that a full cache for every layer is redundant, implementing cross-layer cache sharing remains a practical challenge; existing methods typically suffer from reduced throughput or increased time-to-first-token. In this paper, we demonstrate that dropping a layer's cache offers efficient optimization without information loss. We propose a simple training approach: random cross-layer attention. During training, layers randomly choose to attend either to their own KV states or those of a preceding layer. This stochastic process adapts the model to be robust to various depth-wise cache sharing strategies, ensuring flexibility for unknown hardware constraints at deployment time. Our evaluations show that applying this scheme during pre-training or fine-tuning enables depth-wise cache sharing for various model families. Furthermore, for larger models in data-constrained settings, this approach is suggestive of a regularization-like effect, frequently preserving or improving performance while significantly reducing the cache's memory footprint.

Federated learning (FL) has emerged as a promising paradigm for enabling the collaborative training of models without centralized access to the raw data on local devices. In the typical FL paradigm (e.g., FedAvg), model weights are sent to and from the server each round to participating clients. Recently, the use of small pre-trained models has been shown to be effective in federated learning optimization and improving convergence. However, recent state-of-the-art pre-trained models are getting more capable but also have more parameters, known as the "Foundation Models." In conventional FL, sharing the enormous model weights can quickly put a massive communication burden on the system, especially if more capable models are employed. Can we find a solution to enable those strong and readily available pre-trained models in FL to achieve excellent performance while simultaneously reducing the communication burden? To this end, we investigate the use of parameter-efficient fine-tuning in federated learning and thus introduce a new framework: FedPEFT. Specifically, we systemically evaluate the performance of FedPEFT across a variety of client stability, data distribution, and differential privacy settings. By only locally tuning and globally sharing a small portion of the model weights, significant reductions in the total communication overhead can be achieved while maintaining competitive or even better performance in a wide range of federated learning scenarios, providing insight into a new paradigm for practical and effective federated systems.

Prefill-only decision models inspired by the Jev model score every candidate in a menu during a single forward pass and never decode, which makes one call one to two orders of magnitude cheaper than a same-scale generative language model. We show that this read-out structure comes with a testable property. When an intervention changes only the candidate menu and leaves the input text fixed, the post-intervention accuracy is already determined by the cached first-pass distribution. The estimator restricts the pass-1 probabilities to the menu, renormalizes, and reads off the argmax; it uses no labels and no second forward pass. Across seven model families, ten datasets and two task types, menu-only interventions are predicted to within 4.2 points, and for one family the prediction is exact. A probability-level variant of the same estimator errs by 21.0 points, so the property lives in the ranking rather than in the probabilities and is not recovered by calibration. Same-scale generative language models do not share the property. On those models the same estimator errs by 1.6 to 15.8 points and degrades as the model grows. The property turns inference-time compute into a decision that can be made before deployment. Uniform extra passes buy calibration but almost no accuracy; at matched cost a confidence cascade outperforms every scheme that re-asks the same model, and curating the menu beats enlarging the model, with a 0.8B model on a curated 5-candidate menu reaching 95.4% on CLINC150 against 80.0% for a 4B model on the full 150-label menu.Code and data are available at https://github.com/rlisml/jev-cascade.

We propose expanding the shared Transformer module to produce and initialize Transformers of varying depths, enabling adaptation to diverse resource constraints. Drawing an analogy to genetic expansibility, we term such module as learngene. To identify the expansion mechanism, we delve into the relationship between the layer's position and its corresponding weight value, and find that linear function appropriately approximates this relationship. Building on this insight, we present Transformer as Linear Expansion of learnGene (TLEG), a novel approach for flexibly producing and initializing Transformers of diverse depths. Specifically, to learn learngene, we firstly construct an auxiliary Transformer linearly expanded from learngene, after which we train it through employing soft distillation. Subsequently, we can produce and initialize Transformers of varying depths via linearly expanding the well-trained learngene, thereby supporting diverse downstream scenarios. Extensive experiments on ImageNet-1K demonstrate that TLEG achieves comparable or better performance in contrast to many individual models trained from scratch, while reducing around 2x training cost. When transferring to several downstream classification datasets, TLEG surpasses existing initialization methods by a large margin (e.g., +6.87% on iNat 2019 and +7.66% on CIFAR-100). Under the situation where we need to produce models of varying depths adapting for different resource constraints, TLEG achieves comparable results while reducing around 19x parameters stored to initialize these models and around 5x pre-training costs, in contrast to the pre-training and fine-tuning approach. When transferring a fixed set of parameters to initialize different models, TLEG presents better flexibility and competitive performance while reducing around 2.9x parameters stored to initialize, compared to the pre-training approach.

We introduce a decoder-decoder architecture, YOCO, for large language models, which only caches key-value pairs once. It consists of two components, i.e., a cross-decoder stacked upon a self-decoder. The self-decoder efficiently encodes global key-value (KV) caches that are reused by the cross-decoder via cross-attention. The overall model behaves like a decoder-only Transformer, although YOCO only caches once. The design substantially reduces GPU memory demands, yet retains global attention capability. Additionally, the computation flow enables prefilling to early exit without changing the final output, thereby significantly speeding up the prefill stage. Experimental results demonstrate that YOCO achieves favorable performance compared to Transformer in various settings of scaling up model size and number of training tokens. We also extend YOCO to 1M context length with near-perfect needle retrieval accuracy. The profiling results show that YOCO improves inference memory, prefill latency, and throughput by orders of magnitude across context lengths and model sizes. Code is available at https://aka.ms/YOCO.

We introduce xLLM, an intelligent and efficient Large Language Model (LLM) inference framework designed for high-performance, large-scale enterprise-grade serving, with deep optimizations for diverse AI accelerators. To address these challenges, xLLM builds a novel decoupled service-engine architecture. At the service layer, xLLM-Service features an intelligent scheduling module that efficiently processes multimodal requests and co-locates online and offline tasks through unified elastic scheduling to maximize cluster utilization. This module also relies on a workload-adaptive dynamic Prefill-Decode (PD) disaggregation policy and a novel Encode-Prefill-Decode (EPD) disaggregation policy designed for multimodal inputs. Furthermore, it incorporates a distributed architecture to provide global KV Cache management and robust fault-tolerant capabilities for high availability. At the engine layer, xLLM-Engine co-optimizes system and algorithm designs to fully saturate computing resources. This is achieved through comprehensive multi-layer execution pipeline optimizations, an adaptive graph mode and an xTensor memory management. xLLM-Engine also further integrates algorithmic enhancements such as optimized speculative decoding and dynamic EPLB, collectively serving to substantially boost throughput and inference efficiency. Extensive evaluations demonstrate that xLLM delivers significantly superior performance and resource efficiency. Under identical TPOT constraints, xLLM achieves throughput up to 1.7x that of MindIE and 2.2x that of vLLM-Ascend with Qwen-series models, while maintaining an average throughput of 1.7x that of MindIE with Deepseek-series models. xLLM framework is publicly available at https://github.com/jd-opensource/xllm and https://github.com/jd-opensource/xllm-service.

Adapter tuning, which updates only a few parameters, has become a mainstream method for fine-tuning pretrained language models to downstream tasks. However, it often yields subpar results in few-shot learning. AdapterFusion, which assembles pretrained adapters using composition layers tailored to specific tasks, is a possible solution but significantly increases trainable parameters and deployment costs. Despite this, our preliminary study reveals that even single adapters can outperform Adapterfusion in few-shot learning, urging us to propose \texttt{Merging Pretrained Adapters} (MerA) that efficiently incorporates pretrained adapters to a single model through model fusion. Extensive experiments on two PLMs demonstrate that MerA achieves substantial improvements compared to both single adapters and AdapterFusion. To further enhance the capacity of MerA, we also introduce a simple yet effective technique, referred to as the "same-track" setting, that merges adapters from the same track of pretraining tasks. With the implementation of the "same-track" setting, we observe even more impressive gains, surpassing the performance of both full fine-tuning and adapter tuning by a substantial margin, e.g., 3.5\% in MRPC and 5.0\% in MNLI.

Large language models have achieved notable success across various domains, yet efficient inference is still limited by the quadratic computation complexity of the attention mechanism. The inference consists of prefilling and decoding phases. Although several attempts have been made to accelerate decoding, the inefficiency of the prefilling phase, especially for long-context tasks, remains a challenge. In this paper, we observe a locality in query criticality during the prefilling phase of long-context processing: adjacent query tokens tend to focus on similar subsets of the past Key-Value (KV) cache. Based on this observation, we propose CritiPrefill, a criticality-based segment-wise prefilling method. This method partitions the input sequence's queries and KV cache into segments and blocks, utilizing a segment-wise algorithm to estimate the query criticality. By pruning non-critical computations between query segments and cache blocks in the self-attention mechanism, the prefilling process can be significantly accelerated. Extensive evaluations on multiple long-context datasets show up to 2.7x speedup on Llama3-8B and 3.0x speedup on Yi-9B for 128K context length on a single A100 GPU, with minimal quality degradation.