Daily Papers

Inferring cellular dynamics from unpaired single-cell snapshots requires modeling both state transitions and population growth or death. Unbalanced dynamic optimal transport (UDOT) addresses this by penalizing growth along transport paths, making the choice of growth penalty a key way to encode biological priors on proliferation and apoptosis. However, existing UDOT solvers either rely on computationally expensive NeuralODE simulations or depend on analytical solutions of conditional paths, restricting their efficiency solely to quadratic penalties, i.e. Wasserstein-Fisher-Rao (WFR) geodesics. To enable an efficient UDOT solver for general growth penalties, we first show that concave growth penalties lead to degenerate solutions where growth and transport are separated. We then introduce Simulation-free Unbalanced Dynamic Optimal transport (SUDO), a simulation-free framework for UDOT with general non-quadratic convex growth penalties. SUDO learns the conditional paths and transport costs, solves the induced semi-coupling problem, and subsequently leverages unbalanced flow matching to achieve a simulation-free solution. On WFR benchmarks, SUDO matches the accuracy of efficient, analytical solution-driven algorithms while outperforming simulation-based methods in computational speed. Beyond WFR, SUDO supports asymmetric penalties that encode proliferation-dominant priors and produce more plausible trajectories and growth estimates on synthetic and single-cell datasets.

Inferring cellular trajectories from destructive snapshots is complicated by the challenges of stochasticity and non-conservative mass dynamics such as cell proliferation and apoptosis. Existing unbalanced Optimal Transport (OT) methods treat mass as a continuous fluid, performing inference at the population level. However, this macroscopic view often fails to capture the discrete, jump-like nature of birth-death events at single-cell resolution, which is essential for understanding lineage branching and fate decisions. We present Unbalanced Schrödinger Bridge (USB), a simulation-free framework for learning underlying dynamics that effectively integrates both stochastic and unbalanced effects which also models the discrete, jump-like birth-death dynamics at single-cell resolution. Theoretically, USB provides a tractable solution to the Branching Schrödinger Bridge (BSB) problem, offering a rigorous microscopic interpretation where individual cells undergo both Brownian motion and discrete birth-death jumps. Technically, the method implements an efficient solver by introducing a simulation-free training objective that effectively scales to high-dimensional omics data. Empirically, we demonstrate on both simulated and real-world datasets that USB not only achieves trajectory reconstruction performance better than or comparable to deterministic baselines but also uniquely enables realistic discrete simulation of birth-death dynamics at single-cell resolution.

While garments are essential for realistic digital humans, their topological variety makes them much harder to model than parametric bodies. Traditional tailoring relies on 2D sewing patterns, yet bridging these patterns to 3D geometry currently requires physical simulations. We present Stitched Embeddings, the first simulation-free framework to unify 3D garment reconstruction and sewing pattern inference within a single bidirectional latent space. By leveraging the geometric priors of a pretrained 3D foundation model, our approach overcomes the data scarcity typically associated with high-quality garment modeling. We propose to use the BoxMesh as a critical intermediate representation to align 2D panels into 3D configurations without the computational overhead of a simulator. This architecture achieves state-of-the-art accuracy in pattern reconstruction while significantly improving efficiency. Furthermore, our differentiable pipeline enables novel applications, including pattern recovery from meshes and 3D editing from 2D patterns. Finally, this work provides a scalable link between neural 3D vision and the physical garment manufacturing pipeline. Project Page: https://andreus00.github.io/stitchedembeddings

Unbalanced optimal transport (UOT) provides a principled framework for modeling single-cell transitions and birth-death dynamics, but its high computational cost limits scalability to large-scale datasets. Although single-cell data often contain hierarchical annotations and known transition priors, existing UOT approximations rarely exploit this multiscale structure or prior knowledge. We introduce Multiscale Supervised Unbalanced Optimal Transport Flow Matching (MUST-FM), a simulation-free framework that scales UOT by leveraging hierarchical data structure. MUST-FM further supports an optional supervised formulation that incorporates transition priors, such as cell lineages, to guide the learning of displacement fields and mass variations. Experiments show that MUST-FM reduces computational overhead while achieving robust and biologically meaningful trajectory inference, enabling dynamic modeling of atlas-scale single-cell datasets. The code is available at https://github.com/QiangweiPeng/MUST-FM.

Matching objectives underpin the success of modern generative models and rely on constructing conditional paths that transform a source distribution into a target distribution. Despite being a fundamental building block, conditional paths have been designed principally under the assumption of Euclidean geometry, resulting in straight interpolations. However, this can be particularly restrictive for tasks such as trajectory inference, where straight paths might lie outside the data manifold, thus failing to capture the underlying dynamics giving rise to the observed marginals. In this paper, we propose Metric Flow Matching (MFM), a novel simulation-free framework for conditional flow matching where interpolants are approximate geodesics learned by minimizing the kinetic energy of a data-induced Riemannian metric. This way, the generative model matches vector fields on the data manifold, which corresponds to lower uncertainty and more meaningful interpolations. We prescribe general metrics to instantiate MFM, independent of the task, and test it on a suite of challenging problems including LiDAR navigation, unpaired image translation, and modeling cellular dynamics. We observe that MFM outperforms the Euclidean baselines, particularly achieving SOTA on single-cell trajectory prediction.

Diffusion models have emerged as a promising alternative to autoregressive models in modeling discrete categorical data. Yet diffusion models that directly work on discrete data space do not fully exploit the power of iterative refinement, as the signals are lost during the transition between discrete states. Existing continuous diffusion models for discrete data have limited performance compared to discrete approaches, and the unclear link between them restricts the development of diffusion models for discrete data. In this work, we propose a continuous diffusion model for language modeling that incorporates the geometry of the underlying categorical distribution. We establish a connection between the discrete diffusion and continuous flow on the statistical manifold, and building on the analogy, we introduce a simple design for the diffusion process that generalizes previous discrete diffusion models. We further propose a simulation-free training framework based on radial symmetry and a simple technique to address the high dimensionality of the manifold. Comprehensive experiments on language modeling benchmarks and other modalities show that our method outperforms existing discrete diffusion models and approaches the performance of autoregressive models. Codes available at https://github.com/harryjo97/RDLM{https://github.com/harryjo97/RDLM}.

Deep generative models such as flow matching and diffusion models have shown potential for learning complex dynamical systems, but typically act as black boxes that neglect underlying physical structure, while physics-based models governed by partial differential equations are often incomplete due to missing source terms, or uncertain parametrisations. We present Climate Physics Dynamic Matching (ClimPhyDM), a variational simulation-free dynamics informed framework for weather forecasting that combines an advection-type physics prior with data-driven components in a variational framework. % to capture the stochasticity and multi-modality of unresolved atmospheric dynamics. On the ERA5 benchmark at hourly (42-hour) and monthly (5-month) resolutions, ClimPhyDM outperforms ClimODE, and GB-DM, keeping the lower error at extended horizon, indicating improved temporal stability and resistance to error accumulation, while its simulation-free paradigm also enables training on a single modest 12 GB consumer GPU.

Uncovering stochastic reaction networks from data is central to single-cell biology. Simulation-based inference has evolved into a flexible paradigm for this purpose, circumventing the computational intractability of the likelihood. Notably, approximate Bayesian computation performs this inference by carrying out extensive Gillespie simulations, usually at a high computational cost. Here, we propose a simulation-free approximate Bayesian computation (SFABC) framework that avoids both simulation and explicit likelihood solutions of the network dynamics. Instead, SFABC exploits the Chemical Master Equation to formulate a tractable convex optimization with ensuing constraints, which are then used to accept sampled parameters consistent with the observed data. The resulting posterior approximation comes with theoretical guarantees: it can be tightened systematically, and it provably converges to the exact Bayesian posterior distributions. Using synthetic benchmarks, we show that SFABC matches the accuracy of standard simulation-based algorithms at a substantially reduced computational cost. We then showcase the applicability of SFABC to experimental systems biology by analyzing gene transcription bursting kinetics from snapshot, time-resolved, and cell-cycle-resolved single-cell data.

Reward fine-tuning aims to update a pre-trained flow-based generative model to improve the downstream reward of its generated samples. Existing methods typically formulate this problem as sampling from a reward-tilted distribution, the solution to a KL-regularized reward-maximization problem. Here, we introduce an optimal transport regularizer built directly from the pre-trained drift. Unlike KL reward tilting, the resulting objective transports individual samples toward higher reward rather than reweighting the base distribution. We show that the resulting problem is equivalent to a deterministic optimal control problem on the flow. Given a pre-trained flow map, this equivalence yields a simulation-free reinforcement learning algorithm for fine-tuning generative flows. We call the resulting framework Wasserstein-Tilted Flow Maps (WTF), the first end-to-end fine-tuning recipe native to flow maps. The output is a fine-tuned flow map that retains strong reward-aligned performance at few-step inference budgets without post-hoc distillation. Experiments on ImageNet-256 and text-to-image show that WTF achieves higher reward with comparable or higher diversity than baselines, while requiring up to 280times less training compute. More broadly, we argue that accelerated samplers such as flow maps are essential infrastructure for efficient post-training, and that the dominant KL-regularized formulation is only one of many choices worth revisiting.

"Code-as-Policy" considers how executable code can complement data-intensive Vision-Language-Action (VLA) methods, yet their effectiveness as autonomous controllers for embodied manipulation remains underexplored. We present CaP-X, an open-access framework for systematically studying Code-as-Policy agents in robot manipulation. At its core is CaP-Gym, an interactive environment in which agents control robots by synthesizing and executing programs that compose perception and control primitives. Building on this foundation, CaP-Bench evaluates frontier language and vision-language models across varying levels of abstraction, interaction, and perceptual grounding. Across 12 models, CaP-Bench reveals a consistent trend: performance improves with human-crafted abstractions but degrades as these priors are removed, exposing a dependence on designer scaffolding. At the same time, we observe that this gap can be mitigated through scaling agentic test-time computation--through multi-turn interaction, structured execution feedback, visual differencing, automatic skill synthesis, and ensembled reasoning--substantially improves robustness even when agents operate over low-level primitives. These findings allow us to derive CaP-Agent0, a training-free framework that recovers human-level reliability on several manipulation tasks in simulation and on real embodiments. We further introduce CaP-RL, showing reinforcement learning with verifiable rewards improves success rates and transfers from sim2real with minimal gap. Together, CaP-X provides a principled, open-access platform for advancing embodied coding agents.

Understanding cellular trajectories via time-resolved single-cell transcriptomics is vital for studying development, regeneration, and disease. A key challenge is inferring continuous trajectories from discrete snapshots. Biological complexity stems from stochastic cell fate decisions, temporal proliferation changes, and spatial environmental influences. Current methods often use deterministic interpolations treating cells in isolation, failing to capture the probabilistic branching, population shifts, and niche-dependent signaling driving real biological processes. We introduce Manifold Interpolating Optimal-Transport Flow (MIOFlow) 2.0. This framework learns biologically informed cellular trajectories by integrating manifold learning, optimal transport, and neural differential equations. It models three core processes: (1) stochasticity and branching via Neural Stochastic Differential Equations; (2) non-conservative population changes using a learned growth-rate model initialized with unbalanced optimal transport; and (3) environmental influence through a joint latent space unifying gene expression with spatial features like local cell type composition and signaling. By operating in a PHATE-distance matching autoencoder latent space, MIOFlow 2.0 ensures trajectories respect the data's intrinsic geometry. Empirical comparisons show expressive trajectory learning via neural differential equations outperforms existing generative models, including simulation-free flow matching. Validated on synthetic datasets, embryoid body differentiation, and spatially resolved axolotl brain regeneration, MIOFlow 2.0 improves trajectory accuracy and reveals hidden drivers of cellular transitions, like specific signaling niches. MIOFlow 2.0 thus bridges single-cell and spatial transcriptomics to uncover tissue-scale trajectories.

Realistic environment replicas are increasingly valuable for training and evaluating LLM agents, yet the original systems may be inaccessible or impractical to reproduce. We explore agentic language world modeling: rather than rebuilding an executable environment, a world model agent serves as the environment for a task agent and supports faithful and stateful simulation. We instantiate this paradigm with Trace2Env, a learning-free framework for settings where the original system is unavailable but historical interaction traces remain accessible. Trace2Env reconstructs these traces into a reusable environment worldbook containing environment schemas, grounded evidence, and induced behavioral knowledge. At runtime, the world model agent actively consults the worldbook together with persistent episodic state to infer each action's observation and lasting state effects. Across nine environments, Trace2Env improves both next-observation fidelity and long-horizon interaction consistency over conventional prompt-based LWMs. In multi-turn interaction, task agent actions generated against Trace2Env remain valid more often when replayed in the real environment, indicating that its simulated dynamics better preserve the consequences of earlier actions across successive turns. These results establish agentic language world modeling as an alternative direction for building realistic environment replicas without reconstructing the original executable system.

Large language models (LLMs) are revolutionizing education, with LLM-based agents playing a key role in simulating student behavior. A major challenge in student simulation is modeling the diverse learning patterns of students at various cognitive levels. However, current LLMs, typically trained as ``helpful assistants'', target at generating perfect responses. As a result, they struggle to simulate students with diverse cognitive abilities, as they often produce overly advanced answers, missing the natural imperfections that characterize student learning and resulting in unrealistic simulations. To address this issue, we propose a training-free framework for student simulation. We begin by constructing a cognitive prototype for each student using a knowledge graph, which captures their understanding of concepts from past learning records. This prototype is then mapped to new tasks to predict student performance. Next, we simulate student solutions based on these predictions and iteratively refine them using a beam search method to better replicate realistic mistakes. To validate our approach, we construct the Student\_100 dataset, consisting of 100 students working on Python programming and 5,000 learning records. Experimental results show that our method consistently outperforms baseline models, achieving 100% improvement in simulation accuracy.

Conventional diffusion models typically relies on a fixed forward process, which implicitly defines complex marginal distributions over latent variables. This can often complicate the reverse process' task in learning generative trajectories, and results in costly inference for diffusion models. To address these limitations, we introduce Neural Flow Diffusion Models (NFDM), a novel framework that enhances diffusion models by supporting a broader range of forward processes beyond the fixed linear Gaussian. We also propose a novel parameterization technique for learning the forward process. Our framework provides an end-to-end, simulation-free optimization objective, effectively minimizing a variational upper bound on the negative log-likelihood. Experimental results demonstrate NFDM's strong performance, evidenced by state-of-the-art likelihood estimation. Furthermore, we investigate NFDM's capacity for learning generative dynamics with specific characteristics, such as deterministic straight lines trajectories. This exploration underscores NFDM's versatility and its potential for a wide range of applications.

Estimating physical properties for visual data is a crucial task in computer vision, graphics, and robotics, underpinning applications such as augmented reality, physical simulation, and robotic grasping. However, this area remains under-explored due to the inherent ambiguities in physical property estimation. To address these challenges, we introduce GaussianProperty, a training-free framework that assigns physical properties of materials to 3D Gaussians. Specifically, we integrate the segmentation capability of SAM with the recognition capability of GPT-4V(ision) to formulate a global-local physical property reasoning module for 2D images. Then we project the physical properties from multi-view 2D images to 3D Gaussians using a voting strategy. We demonstrate that 3D Gaussians with physical property annotations enable applications in physics-based dynamic simulation and robotic grasping. For physics-based dynamic simulation, we leverage the Material Point Method (MPM) for realistic dynamic simulation. For robot grasping, we develop a grasping force prediction strategy that estimates a safe force range required for object grasping based on the estimated physical properties. Extensive experiments on material segmentation, physics-based dynamic simulation, and robotic grasping validate the effectiveness of our proposed method, highlighting its crucial role in understanding physical properties from visual data. Online demo, code, more cases and annotated datasets are available on https://Gaussian-Property.github.io{this https URL}.

Reconstructing population dynamics is a central problem in the physical and data sciences. Often, the dynamics are modeled as a Wasserstein gradient flow (WGF): a curve of distributions driven by an energy functional. Though there are multiple mathematical characterizations of a WGF, the dominant algorithmic approach relies on the Jordan--Kinderlehrer--Otto (JKO) scheme. JKO-based methods are inflexible to time discretisation and require solving costly optimal transport problems. We take a residual approach, enforcing the continuity equations via a non-negative loss function whose minimum is the WGF. Combined with a data-fitting divergence, this gives a single global objective. This perspective unifies several existing methods and leads to a new particle-based method, stitching, that is simulation-free and robust to large gaps between observations. We demonstrate that the stitching method achieves state-of-the-art performance across trajectory inference benchmarks. For code see github.com/BasisResearch/wasserstein-residuals.

High-dimensional count data arise in applications such as single-cell RNA sequencing and neural spike trains, where mappings between distributions across successive batches or time points form critical components of data analysis. The recent success of diffusion- and flow-based deep generative models for images, video, and text motivates extending these ideas to count-valued settings, but many existing methods either treat each count as a categorical state or transform counts into a continuous space, neither of which is natural or efficient when the count range is large. We propose count-FM, a flow-matching framework for count data based on a continuous-time birth-death process with local unit jumps. Count-FM learns marginal transitions efficiently in count space through simulation-free training of conditional transition rates, allowing transport between arbitrary count-distributed source and target populations. In simulation, count-FM variants achieve strong sample quality while using substantially fewer parameters. We further apply count-FM to scRNA-seq and neural spike-train data for unconditional generation, transport, and conditional generation. Across these tasks, count-FM yields improved sample quality, greater modeling efficiency, and interpretable transport paths.

Recent advances in text-to-video generation have harnessed the power of diffusion models to create visually compelling content conditioned on text prompts. However, they usually encounter high computational costs and often struggle to produce videos with coherent physical motions. To tackle these issues, we propose GPT4Motion, a training-free framework that leverages the planning capability of large language models such as GPT, the physical simulation strength of Blender, and the excellent image generation ability of text-to-image diffusion models to enhance the quality of video synthesis. Specifically, GPT4Motion employs GPT-4 to generate a Blender script based on a user textual prompt, which commands Blender's built-in physics engine to craft fundamental scene components that encapsulate coherent physical motions across frames. Then these components are inputted into Stable Diffusion to generate a video aligned with the textual prompt. Experimental results on three basic physical motion scenarios, including rigid object drop and collision, cloth draping and swinging, and liquid flow, demonstrate that GPT4Motion can generate high-quality videos efficiently in maintaining motion coherency and entity consistency. GPT4Motion offers new insights in text-to-video research, enhancing its quality and broadening its horizon for future explorations.

In the age of AI-powered educational (AIED) innovation, evaluating the developmental consequences of novel designs before they are exposed to students has become both essential and challenging. Since such interventions may carry irreversible effects, it is critical to anticipate not only potential benefits but also possible harms. This study proposes a student development agent framework based on large language models (LLMs), designed to simulate how students with diverse characteristics may evolve under different educational settings without administering them to real students. By validating the approach through a case study on a multi-agent learning environment (MAIC), we demonstrate that the agent's predictions align with real student outcomes in non-cognitive developments. The results suggest that LLM-based simulations hold promise for evaluating AIED innovations efficiently and ethically. Future directions include enhancing profile structures, incorporating fine-tuned or small task-specific models, validating effects of empirical findings, interpreting simulated data and optimizing evaluation methods.

Faithfully reconstructing textured shapes and physical properties from videos presents an intriguing yet challenging problem. Significant efforts have been dedicated to advancing such a system identification problem in this area. Previous methods often rely on heavy optimization pipelines with a differentiable simulator and renderer to estimate physical parameters. However, these approaches frequently necessitate extensive hyperparameter tuning for each scene and involve a costly optimization process, which limits both their practicality and generalizability. In this work, we propose a novel framework, Vid2Sim, a generalizable video-based approach for recovering geometry and physical properties through a mesh-free reduced simulation based on Linear Blend Skinning (LBS), offering high computational efficiency and versatile representation capability. Specifically, Vid2Sim first reconstructs the observed configuration of the physical system from video using a feed-forward neural network trained to capture physical world knowledge. A lightweight optimization pipeline then refines the estimated appearance, geometry, and physical properties to closely align with video observations within just a few minutes. Additionally, after the reconstruction, Vid2Sim enables high-quality, mesh-free simulation with high efficiency. Extensive experiments demonstrate that our method achieves superior accuracy and efficiency in reconstructing geometry and physical properties from video data.

We present See, Point, Fly (SPF), a training-free aerial vision-and-language navigation (AVLN) framework built atop vision-language models (VLMs). SPF is capable of navigating to any goal based on any type of free-form instructions in any kind of environment. In contrast to existing VLM-based approaches that treat action prediction as a text generation task, our key insight is to consider action prediction for AVLN as a 2D spatial grounding task. SPF harnesses VLMs to decompose vague language instructions into iterative annotation of 2D waypoints on the input image. Along with the predicted traveling distance, SPF transforms predicted 2D waypoints into 3D displacement vectors as action commands for UAVs. Moreover, SPF also adaptively adjusts the traveling distance to facilitate more efficient navigation. Notably, SPF performs navigation in a closed-loop control manner, enabling UAVs to follow dynamic targets in dynamic environments. SPF sets a new state of the art in DRL simulation benchmark, outperforming the previous best method by an absolute margin of 63%. In extensive real-world evaluations, SPF outperforms strong baselines by a large margin. We also conduct comprehensive ablation studies to highlight the effectiveness of our design choice. Lastly, SPF shows remarkable generalization to different VLMs. Project page: https://spf-web.pages.dev

Reconstructing realistic, physically plausible garments from a single image remains a fundamental challenge. Template-free methods capture surface geometry but lack explicit sewing structure for simulation; while programmatic systems are simulation-ready but constrained by predefined templates. This reveals a fundamental representation gap between geometric reconstruction and structured garment construction. We present PatternGSL, a structured garment representation in the form of a template-free and learnable specification language that encodes complete sewing patterns, including panel boundaries, parameterized seams, and explicit stitch topology, in a compact and standardized form. PatternGSL preserves the physical rigor of pattern-based models while removing template dependence, elevating sewing structure as a first-class target for generative modeling. We further propose a vision-language framework that predicts PatternGSL specifications directly from a single image and decodes them into garments using lightweight deterministic validity handling, without optimization-based refinement or manual cleanup. In addition, we introduce PatternGSLData, the first large-scale image-to-GSL paired dataset comprising 300K samples with complete sewing pattern annotations, enabling supervised VLM training for structured garment reconstruction. Experiments demonstrate improved pattern accuracy over prior baselines, explicit sewing-structure recovery, reliable cloth simulation, and pattern-level editing through the same deterministic decoding pipeline. Code and data-processing scripts will be released at https://github.com/PatternGSL/PatternGSL.

Rapid progress in high-level task planning and code generation for open-world robot manipulation has been witnessed in Embodied AI. However, previous studies put much effort into general common sense reasoning and task planning capabilities of large-scale language or multi-modal models, relatively little effort on ensuring the deployability of generated code on real robots, and other fundamental components of autonomous robot systems including robot perception, motion planning, and control. To bridge this ``ideal-to-real'' gap, this paper presents RobotScript, a platform for 1) a deployable robot manipulation pipeline powered by code generation; and 2) a code generation benchmark for robot manipulation tasks in free-form natural language. The RobotScript platform addresses this gap by emphasizing the unified interface with both simulation and real robots, based on abstraction from the Robot Operating System (ROS), ensuring syntax compliance and simulation validation with Gazebo. We demonstrate the adaptability of our code generation framework across multiple robot embodiments, including the Franka and UR5 robot arms, and multiple grippers. Additionally, our benchmark assesses reasoning abilities for physical space and constraints, highlighting the differences between GPT-3.5, GPT-4, and Gemini in handling complex physical interactions. Finally, we present a thorough evaluation on the whole system, exploring how each module in the pipeline: code generation, perception, motion planning, and even object geometric properties, impact the overall performance of the system.

Controllable 3D human avatars have found widespread applications in 3D games, the metaverse, and AR/VR scenarios. The conventional approach to creating such a 3D avatar requires a lengthy, intricate pipeline encompassing appearance modeling, motion planning, rigging, and physical simulation. In this paper, we introduce UNICA (UNIfied neural Controllable Avatar), a skeleton-free generative model that unifies all avatar control components into a single neural framework. Given keyboard inputs akin to video game controls, UNICA generates the next frame of a 3D avatar's geometry through an action-conditioned diffusion model operating on 2D position maps. A point transformer then maps the resulting geometry to 3D Gaussian Splatting for high-fidelity free-view rendering. Our approach naturally captures hair and loose clothing dynamics without manually designed physical simulation, and supports extra-long autoregressive generation. To the best of our knowledge, UNICA is the first model to unify the workflow of "motion planning, rigging, physical simulation, and rendering". Code is released at https://github.com/zjh21/UNICA.

Learning control from action-free recordings is challenging because intervention effects are unobserved and policies may exploit errors in reconstructed dynamics. We present a hierarchical model-based reinforcement learning framework that uses shared structure across related systems to learn system-specific control policies from action-free recordings. A hierarchical dynamical system reconstruction model captures shared dynamics and individual variation through low-dimensional embeddings. These embeddings are then reused to parameterize shared policy and value networks, linking differences in reconstructed dynamics to differences in control. Policies are trained entirely via simulation under an explicit intervention model with additive latent perturbations. Piecewise-linear recurrent neural networks enable mechanistic analyses of the controlled dynamics, while decoder-based constraints make the immediate effects of interventions interpretable in observation space and permit interventions on one modality while protecting another from direct manipulation. On Lorenz-63 and double-pendulum systems, hierarchical policies improve transfer over independently trained policies. On Lorenz-63, they also achieve a higher mean reward than repeated planning with the same reconstructed models, perform comparably to methods trained with controlled interactions, and generalize to systems absent from policy training after embedding inference alone. Applications to neural-behavioral recordings demonstrate suppression of predicted movement under constrained neural perturbations. Together, these findings show how shared dynamical representations support transferable control and mechanistic hypothesis generation from action-free recordings.

Dataflow hardware designs enable efficient FPGA implementations via high-level synthesis (HLS), but correctly sizing first-in-first-out (FIFO) channel buffers remains challenging. FIFO sizes are user-defined and balance latency and area-undersized FIFOs cause stalls and potential deadlocks, while oversized ones waste memory. Determining optimal sizes is non-trivial: existing methods rely on restrictive assumptions, conservative over-allocation, or slow RTL simulations. We emphasize that runtime-based analyses (i.e., simulation) are the only reliable way to ensure deadlock-free FIFO optimization for data-dependent designs. We present FIFOAdvisor, a framework that automatically determines FIFO sizes in HLS designs. It leverages LightningSim, a 99.9\% cycle-accurate simulator supporting millisecond-scale incremental runs with new FIFO configurations. FIFO sizing is formulated as a dual-objective black-box optimization problem, and we explore heuristic and search-based methods to characterize the latency-resource trade-off. FIFOAdvisor also integrates with Stream-HLS, a framework for optimizing affine dataflow designs lowered from C++, MLIR, or PyTorch, enabling deeper optimization of FIFOs in these workloads. We evaluate FIFOAdvisor on Stream-HLS design benchmarks spanning linear algebra and deep learning workloads. Our results reveal Pareto-optimal latency-memory frontiers across optimization strategies. Compared to baseline designs, FIFOAdvisor achieves much lower memory usage with minimal delay overhead. Additionally, it delivers significant runtime speedups over traditional HLS/RTL co-simulation, making it practical for rapid design space exploration. We further demonstrate its capability on a complex accelerator with data-dependent control flow. Code and results: https://github.com/sharc-lab/fifo-advisor

Photorealistic 3D vehicle models with high controllability are essential for autonomous driving simulation and data augmentation. While handcrafted CAD models provide flexible controllability, free CAD libraries often lack the high-quality materials necessary for photorealistic rendering. Conversely, reconstructed 3D models offer high-fidelity rendering but lack controllability. In this work, we introduce UrbanCAD, a framework that pushes the frontier of the photorealism-controllability trade-off by generating highly controllable and photorealistic 3D vehicle digital twins from a single urban image and a collection of free 3D CAD models and handcrafted materials. These digital twins enable realistic 360-degree rendering, vehicle insertion, material transfer, relighting, and component manipulation such as opening doors and rolling down windows, supporting the construction of long-tail scenarios. To achieve this, we propose a novel pipeline that operates in a retrieval-optimization manner, adapting to observational data while preserving flexible controllability and fine-grained handcrafted details. Furthermore, given multi-view background perspective and fisheye images, we approximate environment lighting using fisheye images and reconstruct the background with 3DGS, enabling the photorealistic insertion of optimized CAD models into rendered novel view backgrounds. Experimental results demonstrate that UrbanCAD outperforms baselines based on reconstruction and retrieval in terms of photorealism. Additionally, we show that various perception models maintain their accuracy when evaluated on UrbanCAD with in-distribution configurations but degrade when applied to realistic out-of-distribution data generated by our method. This suggests that UrbanCAD is a significant advancement in creating photorealistic, safety-critical driving scenarios for downstream applications.

Free-flow road networks, such as suburban highways, are increasingly experiencing traffic congestion due to growing commuter inflow and limited infrastructure. Traditional control mechanisms, such as traffic signals or local heuristics, are ineffective or infeasible in these high-speed, signal-free environments. We introduce self-regulating cars, a reinforcement learning-based traffic control protocol that dynamically modulates vehicle speeds to optimize throughput and prevent congestion, without requiring new physical infrastructure. Our approach integrates classical traffic flow theory, gap acceptance models, and microscopic simulation into a physics-informed RL framework. By abstracting roads into super-segments, the agent captures emergent flow dynamics and learns robust speed modulation policies from instantaneous traffic observations. Evaluated in the high-fidelity PTV Vissim simulator on a real-world highway network, our method improves total throughput by 5%, reduces average delay by 13%, and decreases total stops by 3% compared to the no-control setting. It also achieves smoother, congestion-resistant flow while generalizing across varied traffic patterns, demonstrating its potential for scalable, ML-driven traffic management.

Despite the long history of electrochemistry, there is a lack of quantitative algorithms that rigorously correlate experiment with theory. Electrochemical modeling has had advanced across empirical, analytical, numerical, and data-driven paradigms. Data-driven machine learning and physics based electrochemical modeling, however, have not been explicitly linked. Here we introduce Differentiable Electrochemistry, a mew paradigm in electrochemical modeling that integrates thermodynamics, kinetics and mass transport with differentiable programming enabled by automatic differentiation. By making the entire electrochemical simulation end-to-end differentiable, this framework enables gradient-based optimization for mechanistic discovery from experimental and simulation data, achieving approximately one to two orders of improvement over gradient-free methods. We develop a rich repository of differentiable simulators across diverse mechanisms, and apply Differentiable Electrochemistry to bottleneck problems in kinetic analysis. Specifically, Differentiable Electrochemistry advances beyond Tafel and Nicholson method by removing several limitations including Tafel region selection, and identifies the electron transfer mechanism in Li metal electrodeposition/stripping by parameterizing the full Marcus-Hush-Chidsey formalism. In addition, Differentiable Electrochemistry interprets Operando X-ray measurements in concentrated electrolyte by coupling concentration and velocity theories. This framework resolves ambiguity when multiple electrochemical theories intertwine, and establishes a physics-consistent and data-efficient foundation for predictive electrochemical modeling.

We introduce PAT3D, the first physics-augmented text-to-3D scene generation framework that integrates vision-language models with physics-based simulation to produce physically plausible, simulation-ready, and intersection-free 3D scenes. Given a text prompt, PAT3D generates 3D objects, infers their spatial relations, and organizes them into a hierarchical scene tree, which is then converted into initial conditions for simulation. A differentiable rigid-body simulator ensures realistic object interactions under gravity, driving the scene toward static equilibrium without interpenetrations. To further enhance scene quality, we introduce a simulation-in-the-loop optimization procedure that guarantees physical stability and non-intersection, while improving semantic consistency with the input prompt. Experiments demonstrate that PAT3D substantially outperforms prior approaches in physical plausibility, semantic consistency, and visual quality. Beyond high-quality generation, PAT3D uniquely enables simulation-ready 3D scenes for downstream tasks such as scene editing and robotic manipulation. Code and data are available at: https://github.com/Simulation-Intelligence/PAT3D.

Existing approaches to persona simulation with Large Language Models (LLMs) mostly rely on shallow character descriptions that fail to sustain coherent character behavior across extended interactions. We introduce Deep Persona, a psychologically grounded, three-layered architecture that organizes personas into hierarchical levels of observable expression, latent beliefs, and core motivational drives, for constructing highly convincing role-playing agents. Governed by the principles of scripted determinism and bounded agency, the architecture restricts the model to a reactive engine guided by a structured internal script. We further propose a reference-free evaluation framework that benchmarks dialogue naturalness against empirical human distributions using established psychological clinical instruments and adversarial stress-tests. Empirical evaluation reveals that while LLMs achieve high pragmatic fluency, they exhibit systematic limitations in emotional expression and joint attention. In addition, we present a case study of two Deep Personas and evaluate them using the proposed framework, demonstrating that structured personas can produce interactions that more closely align with human conversational behavior.

We present PDE-Agents, a multi-agent ecosystem that automates the full lifecycle of partial differential equation (PDE) / finite element method (FEM) simulations through natural-language interaction. Three specialist large language model (LLM) agents (Simulation, Analytics, Database) are orchestrated via a LangGraph supervisor, with a local open-source LLM stack (Qwen3-Coder-Next, Llama 4 Scout) on dual NVIDIA RTX PRO 6000 GPUs. The architecture is model-agnostic, validated across two LLM generations. A GraphRAG knowledge base (Neo4j, 768-d vector embeddings) encodes curated material properties, known failure patterns, and prior run lineage. We report seven contributions: (i) a verification and validation (V&V) study confirming second-order spatial convergence (O(h^2)) on the heat-equation solver; (ii) a three-way ablation over 50 tasks with a frozen KG (KG On, KG Off, KG Smart), where KG Smart reaches 100% success and the highest output quality (physics 0.933 vs. 0.853 for KG Off; MPF 0.926 vs. 0.796); (iii) a novel-material experiment with three fictional materials known only to the KG, where KG Smart attains near-perfect material property fidelity (MPF = 1.00) versus 0.34 for the KG-free baseline; (iv) a failure analysis tracing KG On's three failures to budget exhaustion and timeout, establishing warm-start injection as the dominant reliability factor; (v) an adaptive framework selecting the optimal retrieval mode per task; (vi) production metrics from 1,369 runs (97.8% success, 57.6% first-try); and (vii) a 100-task KG growth experiment showing a difficulty-dependent gain, with hard-task MPF improving 8.8% while easy/novel tasks stay at ceiling. All code, models, and evaluation artifacts are released openly. Our findings show that integration pattern, not knowledge content, determines whether GraphRAG augmentation helps or hinders LLM agents.

Molecular dynamics (MD) simulations play a crucial role in scientific research. Yet their computational cost often limits the timescales and system sizes that can be explored. Most data-driven efforts have been focused on reducing the computational cost of accurate interatomic forces required for solving the equations of motion. Despite their success, however, these machine learning interatomic potentials (MLIPs) are still bound to small time-steps. In this work, we introduce TrajCast, a transferable and data-efficient framework based on autoregressive equivariant message passing networks that directly updates atomic positions and velocities lifting the constraints imposed by traditional numerical integration. We benchmark our framework across various systems, including a small molecule, crystalline material, and bulk liquid, demonstrating excellent agreement with reference MD simulations for structural, dynamical, and energetic properties. Depending on the system, TrajCast allows for forecast intervals up to 30times larger than traditional MD time-steps, generating over 15 ns of trajectory data per day for a solid with more than 4,000 atoms. By enabling efficient large-scale simulations over extended timescales, TrajCast can accelerate materials discovery and explore physical phenomena beyond the reach of traditional simulations and experiments. An open-source implementation of TrajCast is accessible under https://github.com/IBM/trajcast.

Accurate free-energy estimation is essential in molecular simulation, yet the periodic boundary conditions (PBC) commonly used in computer simulations have rarely been explicitly exploited. Equilibrium methods such as umbrella sampling, metadynamics, and adaptive biasing force require extensive sampling, while non-equilibrium pulling with Jarzynski's equality suffers from poor convergence due to exponential averaging. Here, we introduce a physics-informed, score-based diffusion framework: by mapping PBC simulations onto a Brownian particle in a periodic potential, we derive the Fokker-Planck steady-state score that directly encodes free-energy gradients. A neural network is trained on non-equilibrium trajectories to learn this score, providing a principled scheme to efficiently reconstruct the potential of mean force (PMF). On benchmark periodic potentials and small-molecule membrane permeation, our method is up to one order of magnitude more efficient than umbrella sampling.

Given an unconditional diffusion model and a predictor for a target property of interest (e.g., a classifier), the goal of training-free guidance is to generate samples with desirable target properties without additional training. Existing methods, though effective in various individual applications, often lack theoretical grounding and rigorous testing on extensive benchmarks. As a result, they could even fail on simple tasks, and applying them to a new problem becomes unavoidably difficult. This paper introduces a novel algorithmic framework encompassing existing methods as special cases, unifying the study of training-free guidance into the analysis of an algorithm-agnostic design space. Via theoretical and empirical investigation, we propose an efficient and effective hyper-parameter searching strategy that can be readily applied to any downstream task. We systematically benchmark across 7 diffusion models on 16 tasks with 40 targets, and improve performance by 8.5% on average. Our framework and benchmark offer a solid foundation for conditional generation in a training-free manner.

Model-free control strategies such as reinforcement learning have shown the ability to learn control strategies without requiring an accurate model or simulator of the world. While this is appealing due to the lack of modeling requirements, such methods can be sample inefficient, making them impractical in many real-world domains. On the other hand, model-based control techniques leveraging accurate simulators can circumvent these challenges and use a large amount of cheap simulation data to learn controllers that can effectively transfer to the real world. The challenge with such model-based techniques is the requirement for an extremely accurate simulation, requiring both the specification of appropriate simulation assets and physical parameters. This requires considerable human effort to design for every environment being considered. In this work, we propose a learning system that can leverage a small amount of real-world data to autonomously refine a simulation model and then plan an accurate control strategy that can be deployed in the real world. Our approach critically relies on utilizing an initial (possibly inaccurate) simulator to design effective exploration policies that, when deployed in the real world, collect high-quality data. We demonstrate the efficacy of this paradigm in identifying articulation, mass, and other physical parameters in several challenging robotic manipulation tasks, and illustrate that only a small amount of real-world data can allow for effective sim-to-real transfer. Project website at https://weirdlabuw.github.io/asid

Simulation-free methods for training continuous-time generative models construct probability paths that go between noise distributions and individual data samples. Recent works, such as Flow Matching, derived paths that are optimal for each data sample. However, these algorithms rely on independent data and noise samples, and do not exploit underlying structure in the data distribution for constructing probability paths. We propose Multisample Flow Matching, a more general framework that uses non-trivial couplings between data and noise samples while satisfying the correct marginal constraints. At very small overhead costs, this generalization allows us to (i) reduce gradient variance during training, (ii) obtain straighter flows for the learned vector field, which allows us to generate high-quality samples using fewer function evaluations, and (iii) obtain transport maps with lower cost in high dimensions, which has applications beyond generative modeling. Importantly, we do so in a completely simulation-free manner with a simple minimization objective. We show that our proposed methods improve sample consistency on downsampled ImageNet data sets, and lead to better low-cost sample generation.

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on 43--78% of contact frames, while kinematic and object-aware retargeting methods maintain contact on <10% and 22.5% of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

Automatic Pitch Correction (APC) enhances vocal recordings by aligning pitch deviations with the intended musical notes. However, existing APC systems either rely on reference pitches, which limits their practical applicability, or employ simple pitch estimation algorithms that often fail to preserve expressiveness and naturalness. We propose BERT-APC, a novel reference-free APC framework that corrects pitch errors while maintaining the natural expressiveness of vocal performances. In BERT-APC, a novel stationary pitch predictor first estimates the perceived pitch of each note from the detuned singing voice. A context-aware note pitch predictor estimates the intended pitch sequence by leveraging a music language model repurposed to incorporate musical context. Finally, a note-level correction algorithm fixes pitch errors while preserving intentional pitch deviations for emotional expression. In addition, we introduce a learnable data augmentation strategy that improves the robustness of the music language model by simulating realistic detuning patterns. Compared to two recent singing voice transcription models, BERT-APC demonstrated superior performance in note pitch prediction, outperforming the second-best model, ROSVOT, by 10.49%p on highly detuned samples in terms of the raw pitch accuracy. In the MOS test, BERT-APC achieved the highest score of 4.32 pm 0.15, which is significantly higher than those of the widely-used commercial APC tools, AutoTune (3.22 pm 0.18) and Melodyne (3.08 pm 0.18), while maintaining a comparable ability to preserve expressive nuances. To the best of our knowledge, this is the first APC model that leverages a music language model to achieve reference-free pitch correction with symbolic musical context. The corrected audio samples of BERT-APC are available online.

Recent advances in 3D content generation have amplified demand for dynamic models that are both visually realistic and physically consistent. However, state-of-the-art video diffusion models frequently produce implausible results such as momentum violations and object interpenetrations. Existing physics-aware approaches often rely on task-specific fine-tuning or supervised data, which limits their scalability and applicability. To address the challenge, we present PhyMAGIC, a training-free framework that generates physically consistent motion from a single image. PhyMAGIC integrates a pre-trained image-to-video diffusion model, confidence-guided reasoning via LLMs, and a differentiable physics simulator to produce 3D assets ready for downstream physical simulation without fine-tuning or manual supervision. By iteratively refining motion prompts using LLM-derived confidence scores and leveraging simulation feedback, PhyMAGIC steers generation toward physically consistent dynamics. Comprehensive experiments demonstrate that PhyMAGIC outperforms state-of-the-art video generators and physics-aware baselines, enhancing physical property inference and motion-text alignment while maintaining visual fidelity.

Classifier-Free Guidance (CFG) has been a default technique in various visual generative models, yet it requires inference from both conditional and unconditional models during sampling. We propose to build visual models that are free from guided sampling. The resulting algorithm, Guidance-Free Training (GFT), matches the performance of CFG while reducing sampling to a single model, halving the computational cost. Unlike previous distillation-based approaches that rely on pretrained CFG networks, GFT enables training directly from scratch. GFT is simple to implement. It retains the same maximum likelihood objective as CFG and differs mainly in the parameterization of conditional models. Implementing GFT requires only minimal modifications to existing codebases, as most design choices and hyperparameters are directly inherited from CFG. Our extensive experiments across five distinct visual models demonstrate the effectiveness and versatility of GFT. Across domains of diffusion, autoregressive, and masked-prediction modeling, GFT consistently achieves comparable or even lower FID scores, with similar diversity-fidelity trade-offs compared with CFG baselines, all while being guidance-free. Code will be available at https://github.com/thu-ml/GFT.

Classifier-free guidance is a key component for enhancing the performance of conditional generative models across diverse tasks. While it has previously demonstrated remarkable improvements for the sample quality, it has only been exclusively employed for diffusion models. In this paper, we integrate classifier-free guidance into Flow Matching (FM) models, an alternative simulation-free approach that trains Continuous Normalizing Flows (CNFs) based on regressing vector fields. We explore the usage of Guided Flows for a variety of downstream applications. We show that Guided Flows significantly improves the sample quality in conditional image generation and zero-shot text-to-speech synthesis, boasting state-of-the-art performance. Notably, we are the first to apply flow models for plan generation in the offline reinforcement learning setting, showcasing a 10x speedup in computation compared to diffusion models while maintaining comparable performance.

Neural surrogate models for Partial Differential Equations (PDEs) on unstructured 3D geometries are often limited by poor generalization and the high cost of generating large-scale training datasets. Consequently, pre-training on massive datasets of related PDE dynamics has emerged as a critical alternative to enhance the robustness and scalability of these models. However, this strategy is neither compute- nor data-efficient, as it relies on massive pre-computed data that is very costly to generate. In this work, we introduce a disk-data-free pre-training framework tailored to both steady-state and transient regimes. For steady-state problems, we propose a geometry-driven strategy that leverages intrinsic shape descriptors to learn representations of complex 3D domains. For transient problems, we introduce a physics-driven approach based on online generation of synthetic PDE data, enabling scalable pre-training without reliance on expensive datasets. Across multiple experiments, our approach achieves faster convergence, greater data efficiency, and higher accuracy during fine-tuning, particularly under realistic low-data regimes. This methodology provides a practical pathway toward data-efficient neural emulators for large-scale simulations.

We present the first unified, modular, open-source 3DGS-based simulation framework for Real2Sim2Real robot learning. It features a holistic Real2Sim pipeline that synthesizes hyper-realistic geometry and appearance of complex real-world scenarios, paving the way for analyzing and bridging the Sim2Real gap. Powered by Gaussian Splatting and MuJoCo, Discoverse enables massively parallel simulation of multiple sensor modalities and accurate physics, with inclusive supports for existing 3D assets, robot models, and ROS plugins, empowering large-scale robot learning and complex robotic benchmarks. Through extensive experiments on imitation learning, Discoverse demonstrates state-of-the-art zero-shot Sim2Real transfer performance compared to existing simulators. For code and demos: https://air-discoverse.github.io/.

Foundation models are emerging as a powerful paradigm for fMRI analysis, but current approaches face a dual bottleneck of data- and training-efficiency. Atlas-based methods aggregate voxel signals into fixed regions of interest, reducing data dimensionality but discarding fine-grained spatial details, and requiring extremely large cohorts to train effectively as general-purpose foundation models. Atlas-free methods, on the other hand, operate directly on voxel-level information - preserving spatial fidelity but are prohibitively memory- and compute-intensive, making large-scale pre-training infeasible. We introduce SLIM-Brain (Sample-efficient, Low-memory fMRI Foundation Model for Human Brain), a new atlas-free foundation model that simultaneously improves both data- and training-efficiency. SLIM-Brain adopts a two-stage adaptive design: (i) a lightweight temporal extractor captures global context across full sequences and ranks data windows by saliency, and (ii) a 4D hierarchical encoder (Hiera-JEPA) learns fine-grained voxel-level representations only from the top-k selected windows, while deleting about 70% masked patches. Extensive experiments across seven public benchmarks show that SLIM-Brain establishes new state-of-the-art performance on diverse tasks, while requiring only 4 thousand pre-training sessions and approximately 30% of GPU memory comparing to traditional voxel-level methods.

Tool-calling agents have become central to enterprise AI, yet training and evaluating them at scale remains severely constrained due to business and legal restrictions on enterprise systems, data, and database schemas. Tabular data synthesis offers a natural alternative, but its effectiveness is fundamentally limited by structural validity and schema availability, while procedure-based approaches yield the opposite weakness, typically lacking distributional fidelity without per-domain authoring. We introduce **Synthesis Through Simulation** (STS), a **schema--free** data synthesis paradigm in which an LLM agent generates data by executing operations against policy-enforcing APIs within simulated enterprise environments. Because data is generated through the same environment that defines what is valid, STS guarantees structural validity by construction while decoupling validity enforcement from distribution modeling, allowing each to be addressed independently. The **Generalist Populator** (GP), STS's domain-agnostic agent, addresses the remaining challenges of distributional fidelity and synthesis scalability: GP achieves **0.88** average marginal fidelity and **100\% constraint satisfaction** across all ten environments *without access to DB schemas*, while statistical synthesizers are inapplicable to seven due to necessary seed data requirements, and schema-privileged agents fail 82\% of trajectories on airline environment's tightly coupled workflows due to brittle task composition. We open-source the full framework, all ten environments, and generated datasets at https://github.com/SAP/synthesis-through-simulation.

Given an unconditional generative model and a predictor for a target property (e.g., a classifier), the goal of training-free guidance is to generate samples with desirable target properties without additional training. As a highly efficient technique for steering generative models toward flexible outcomes, training-free guidance has gained increasing attention in diffusion models. However, existing methods only handle data in continuous spaces, while many scientific applications involve both continuous and discrete data (referred to as multimodality). Another emerging trend is the growing use of the simple and general flow matching framework in building generative foundation models, where guided generation remains under-explored. To address this, we introduce TFG-Flow, a novel training-free guidance method for multimodal generative flow. TFG-Flow addresses the curse-of-dimensionality while maintaining the property of unbiased sampling in guiding discrete variables. We validate TFG-Flow on four molecular design tasks and show that TFG-Flow has great potential in drug design by generating molecules with desired properties.

Training sophisticated machine learning (ML) models requires large datasets that are difficult or expensive to collect for many applications. If prior knowledge about system dynamics is available, mechanistic representations can be used to supplement real-world data. We present SimbaML (Simulation-Based ML), an open-source tool that unifies realistic synthetic dataset generation from ordinary differential equation-based models and the direct analysis and inclusion in ML pipelines. SimbaML conveniently enables investigating transfer learning from synthetic to real-world data, data augmentation, identifying needs for data collection, and benchmarking physics-informed ML approaches. SimbaML is available from https://pypi.org/project/simba-ml/.

We present Muses, the first training-free method for fantastic 3D creature generation in a feed-forward paradigm. Previous methods, which rely on part-aware optimization, manual assembly, or 2D image generation, often produce unrealistic or incoherent 3D assets due to the challenges of intricate part-level manipulation and limited out-of-domain generation. In contrast, Muses leverages the 3D skeleton, a fundamental representation of biological forms, to explicitly and rationally compose diverse elements. This skeletal foundation formalizes 3D content creation as a structure-aware pipeline of design, composition, and generation. Muses begins by constructing a creatively composed 3D skeleton with coherent layout and scale through graph-constrained reasoning. This skeleton then guides a voxel-based assembly process within a structured latent space, integrating regions from different objects. Finally, image-guided appearance modeling under skeletal conditions is applied to generate a style-consistent and harmonious texture for the assembled shape. Extensive experiments establish Muses' state-of-the-art performance in terms of visual fidelity and alignment with textual descriptions, and potential on flexible 3D object editing. Project page: https://luhexiao.github.io/Muses.github.io/.

Articulated 3D objects are central to many applications in robotics, AR/VR, and animation. Recent approaches to modeling such objects either rely on optimization-based reconstruction pipelines that require dense-view supervision or on feed-forward generative models that produce coarse geometric approximations and often overlook surface texture. In contrast, open-world 3D generation of static objects has achieved remarkable success, especially with the advent of native 3D diffusion models such as Trellis. However, extending these methods to articulated objects by training native 3D diffusion models poses significant challenges. In this work, we present FreeArt3D, a training-free framework for articulated 3D object generation. Instead of training a new model on limited articulated data, FreeArt3D repurposes a pre-trained static 3D diffusion model (e.g., Trellis) as a powerful shape prior. It extends Score Distillation Sampling (SDS) into the 3D-to-4D domain by treating articulation as an additional generative dimension. Given a few images captured in different articulation states, FreeArt3D jointly optimizes the object's geometry, texture, and articulation parameters without requiring task-specific training or access to large-scale articulated datasets. Our method generates high-fidelity geometry and textures, accurately predicts underlying kinematic structures, and generalizes well across diverse object categories. Despite following a per-instance optimization paradigm, FreeArt3D completes in minutes and significantly outperforms prior state-of-the-art approaches in both quality and versatility.

LLM agents excel in compact environments requiring deep reasoning but remain brittle when operating in broader, more complex contexts that demand robustness across diverse tools and schemas. Building bespoke environments for training is heavy, brittle, and limits progress. In this paper, we demonstrate that LLMs can simulate realistic environment feedback without access to actual testbed data or APIs. Inspired by this capability, we propose two frameworks: Simia-SFT, a pipeline that synthesizes SFT data by amplifying small seed sets into diverse trajectories in an environment-agnostic manner, and Simia-RL, a framework that enables RL training without real environment implementations through LLM-simulated feedback. Fine-tuning open models yields consistent improvements across multiple benchmarks, surpassing GPT-4o and approaching o4-mini on tau^2-Bench. Together, Simia-SFT and Simia-RL enable scalable agent training without environment engineering, replacing heavy and brittle implementations with flexible LLM-based simulation.

Federated learning (FL) is an emerging machine learning (ML) training paradigm where clients own their data and collaborate to train a global model, without revealing any data to the server and other participants. Researchers commonly perform experiments in a simulation environment to quickly iterate on ideas. However, existing open-source tools do not offer the efficiency required to simulate FL on larger and more realistic FL datasets. We introduce pfl-research, a fast, modular, and easy-to-use Python framework for simulating FL. It supports TensorFlow, PyTorch, and non-neural network models, and is tightly integrated with state-of-the-art privacy algorithms. We study the speed of open-source FL frameworks and show that pfl-research is 7-72times faster than alternative open-source frameworks on common cross-device setups. Such speedup will significantly boost the productivity of the FL research community and enable testing hypotheses on realistic FL datasets that were previously too resource intensive. We release a suite of benchmarks that evaluates an algorithm's overall performance on a diverse set of realistic scenarios. The code is available on GitHub at https://github.com/apple/pfl-research.

We present Free4D, a novel tuning-free framework for 4D scene generation from a single image. Existing methods either focus on object-level generation, making scene-level generation infeasible, or rely on large-scale multi-view video datasets for expensive training, with limited generalization ability due to the scarcity of 4D scene data. In contrast, our key insight is to distill pre-trained foundation models for consistent 4D scene representation, which offers promising advantages such as efficiency and generalizability. 1) To achieve this, we first animate the input image using image-to-video diffusion models followed by 4D geometric structure initialization. 2) To turn this coarse structure into spatial-temporal consistent multiview videos, we design an adaptive guidance mechanism with a point-guided denoising strategy for spatial consistency and a novel latent replacement strategy for temporal coherence. 3) To lift these generated observations into consistent 4D representation, we propose a modulation-based refinement to mitigate inconsistencies while fully leveraging the generated information. The resulting 4D representation enables real-time, controllable rendering, marking a significant advancement in single-image-based 4D scene generation.

Autonomous 6G network management requires agents that can execute tools, observe the resulting state changes, and adapt their decisions accordingly. Existing benchmarks based on static questions or scripted episode replay, however, do not support such closed-loop interaction, limiting agents to passive evaluation without the ability to learn from environmental feedback. This paper presents 6GAgentGym to provide closed-loop capability. The framework provides an interactive environment with 42 typed tools whose effect classification distinguishes read-only observation from state-mutating configuration, backed by a learned Experiment Model calibrated on NS-3 simulation data. 6G-Forge bootstraps closed-loop training trajectories from NS-3 seeds via iterative Self-Instruct generation with execution verification against the Experiment Model. Supervised fine-tuning on the resulting corpus followed by reinforcement learning with online closed-loop interaction enables an 8B open-source model to achieve comparable overall success rate to GPT-5 on the accompanying 6GAgentBench, with stronger performance on long-horizon tasks. Together, these components provide a viable path toward autonomous, closed-loop network management.

High-fidelity simulation is essential for robotics research, enabling safe and efficient testing of perception, control, and navigation algorithms. However, achieving both photorealistic rendering and accurate physics modeling remains a challenge. This paper presents a novel simulation framework, the Unreal Robotics Lab (URL), that integrates the advanced rendering capabilities of the Unreal Engine with MuJoCo's high-precision physics simulation. Our approach enables realistic robotic perception while maintaining accurate physical interactions, facilitating benchmarking and dataset generation for vision-based robotics applications. The system supports complex environmental effects, such as smoke, fire, and water dynamics, which are critical to evaluating robotic performance under adverse conditions. We benchmark visual navigation and SLAM methods within our framework, demonstrating its utility for testing real-world robustness in controlled yet diverse scenarios. By bridging the gap between physics accuracy and photorealistic rendering, our framework provides a powerful tool for advancing robotics research and sim-to-real transfer. Our open-source framework is available at https://unrealroboticslab.github.io/.

Trainable layers such as convolutional building blocks are the standard network design choices by learning parameters to capture the global context through successive spatial operations. When designing an efficient network, trainable layers such as the depthwise convolution is the source of efficiency in the number of parameters and FLOPs, but there was little improvement to the model speed in practice. This paper argues that simple built-in parameter-free operations can be a favorable alternative to the efficient trainable layers replacing spatial operations in a network architecture. We aim to break the stereotype of organizing the spatial operations of building blocks into trainable layers. Extensive experimental analyses based on layer-level studies with fully-trained models and neural architecture searches are provided to investigate whether parameter-free operations such as the max-pool are functional. The studies eventually give us a simple yet effective idea for redesigning network architectures, where the parameter-free operations are heavily used as the main building block without sacrificing the model accuracy as much. Experimental results on the ImageNet dataset demonstrate that the network architectures with parameter-free operations could enjoy the advantages of further efficiency in terms of model speed, the number of the parameters, and FLOPs. Code and ImageNet pretrained models are available at https://github.com/naver-ai/PfLayer.

Human motion generation plays a vital role in applications such as digital humans and humanoid robot control. However, most existing approaches disregard physics constraints, leading to the frequent production of physically implausible motions with pronounced artifacts such as floating and foot sliding. In this paper, we propose Morph, a Motion-free physics optimization framework, comprising a Motion Generator and a Motion Physics Refinement module, for enhancing physical plausibility without relying on costly real-world motion data. Specifically, the Motion Generator is responsible for providing large-scale synthetic motion data, while the Motion Physics Refinement Module utilizes these synthetic data to train a motion imitator within a physics simulator, enforcing physical constraints to project the noisy motions into a physically-plausible space. These physically refined motions, in turn, are used to fine-tune the Motion Generator, further enhancing its capability. Experiments on both text-to-motion and music-to-dance generation tasks demonstrate that our framework achieves state-of-the-art motion generation quality while improving physical plausibility drastically.

Recent years have seen a surge in deep learning approaches to accelerate numerical solvers, which provide faithful but computationally intensive simulations of the physical world. These deep surrogates are generally trained in a supervised manner from limited amounts of data slowly generated by the same solver they intend to accelerate. We propose an open-source framework that enables the online training of these models from a large ensemble run of simulations. It leverages multiple levels of parallelism to generate rich datasets. The framework avoids I/O bottlenecks and storage issues by directly streaming the generated data. A training reservoir mitigates the inherent bias of streaming while maximizing GPU throughput. Experiment on training a fully connected network as a surrogate for the heat equation shows the proposed approach enables training on 8TB of data in 2 hours with an accuracy improved by 47% and a batch throughput multiplied by 13 compared to a traditional offline procedure.

Realistic video simulation has shown significant potential across diverse applications, from virtual reality to film production. This is particularly true for scenarios where capturing videos in real-world settings is either impractical or expensive. Existing approaches in video simulation often fail to accurately model the lighting environment, represent the object geometry, or achieve high levels of photorealism. In this paper, we propose Anything in Any Scene, a novel and generic framework for realistic video simulation that seamlessly inserts any object into an existing dynamic video with a strong emphasis on physical realism. Our proposed general framework encompasses three key processes: 1) integrating a realistic object into a given scene video with proper placement to ensure geometric realism; 2) estimating the sky and environmental lighting distribution and simulating realistic shadows to enhance the light realism; 3) employing a style transfer network that refines the final video output to maximize photorealism. We experimentally demonstrate that Anything in Any Scene framework produces simulated videos of great geometric realism, lighting realism, and photorealism. By significantly mitigating the challenges associated with video data generation, our framework offers an efficient and cost-effective solution for acquiring high-quality videos. Furthermore, its applications extend well beyond video data augmentation, showing promising potential in virtual reality, video editing, and various other video-centric applications. Please check our project website https://anythinginanyscene.github.io for access to our project code and more high-resolution video results.

While video generation models excel at producing high-quality monocular videos, generating 3D stereoscopic and spatial videos for immersive applications remains an underexplored challenge. We present a pose-free and training-free method that leverages an off-the-shelf monocular video generation model to produce immersive 3D videos. Our approach first warps the generated monocular video into pre-defined camera viewpoints using estimated depth information, then applies a novel frame matrix inpainting framework. This framework utilizes the original video generation model to synthesize missing content across different viewpoints and timestamps, ensuring spatial and temporal consistency without requiring additional model fine-tuning. Moreover, we develop a \dualupdate~scheme that further improves the quality of video inpainting by alleviating the negative effects propagated from disoccluded areas in the latent space. The resulting multi-view videos are then adapted into stereoscopic pairs or optimized into 4D Gaussians for spatial video synthesis. We validate the efficacy of our proposed method by conducting experiments on videos from various generative models, such as Sora, Lumiere, WALT, and Zeroscope. The experiments demonstrate that our method has a significant improvement over previous methods. Project page at: https://daipengwa.github.io/S-2VG_ProjectPage/

When the environment is partially observable (PO), a deep reinforcement learning (RL) agent must learn a suitable temporal representation of the entire history in addition to a strategy to control. This problem is not novel, and there have been model-free and model-based algorithms proposed for this problem. However, inspired by recent success in model-free image-based RL, we noticed the absence of a model-free baseline for history-based RL that (1) uses full history and (2) incorporates recent advances in off-policy continuous control. Therefore, we implement recurrent versions of DDPG, TD3, and SAC (RDPG, RTD3, and RSAC) in this work, evaluate them on short-term and long-term PO domains, and investigate key design choices. Our experiments show that RDPG and RTD3 can surprisingly fail on some domains and that RSAC is the most reliable, reaching near-optimal performance on nearly all domains. However, one task that requires systematic exploration still proved to be difficult, even for RSAC. These results show that model-free RL can learn good temporal representation using only reward signals; the primary difficulty seems to be computational cost and exploration. To facilitate future research, we have made our PyTorch implementation publicly available at https://github.com/zhihanyang2022/off-policy-continuous-control.

Recent research has been increasingly focusing on developing 3D world models that simulate complex real-world scenarios. World models have found broad applications across various domains, including embodied AI, autonomous driving, entertainment, etc. A more realistic simulation with accurate physics will effectively narrow the sim-to-real gap and allow us to gather rich information about the real world conveniently. While traditional manual modeling has enabled the creation of virtual 3D scenes, modern approaches have leveraged advanced machine learning algorithms for 3D world generation, with most recent advances focusing on generative methods that can create virtual worlds based on user instructions. This work explores such a research direction by proposing LatticeWorld, a simple yet effective 3D world generation framework that streamlines the industrial production pipeline of 3D environments. LatticeWorld leverages lightweight LLMs (LLaMA-2-7B) alongside the industry-grade rendering engine (e.g., Unreal Engine 5) to generate a dynamic environment. Our proposed framework accepts textual descriptions and visual instructions as multimodal inputs and creates large-scale 3D interactive worlds with dynamic agents, featuring competitive multi-agent interaction, high-fidelity physics simulation, and real-time rendering. We conduct comprehensive experiments to evaluate LatticeWorld, showing that it achieves superior accuracy in scene layout generation and visual fidelity. Moreover, LatticeWorld achieves over a 90times increase in industrial production efficiency while maintaining high creative quality compared with traditional manual production methods. Our demo video is available at https://youtu.be/8VWZXpERR18

Recent advances in interactive video generations have demonstrated diffusion model's potential as world models by capturing complex physical dynamics and interactive behaviors. However, existing interactive world models depend on bidirectional attention and lengthy inference steps, severely limiting real-time performance. Consequently, they are hard to simulate real-world dynamics, where outcomes must update instantaneously based on historical context and current actions. To address this, we present Matrix-Game 2.0, an interactive world model generates long videos on-the-fly via few-step auto-regressive diffusion. Our framework consists of three key components: (1) A scalable data production pipeline for Unreal Engine and GTA5 environments to effectively produce massive amounts (about 1200 hours) of video data with diverse interaction annotations; (2) An action injection module that enables frame-level mouse and keyboard inputs as interactive conditions; (3) A few-step distillation based on the casual architecture for real-time and streaming video generation. Matrix Game 2.0 can generate high-quality minute-level videos across diverse scenes at an ultra-fast speed of 25 FPS. We open-source our model weights and codebase to advance research in interactive world modeling.

Creating accurate, physical simulations directly from real-world robot motion holds great value for safe, scalable, and affordable robot learning, yet remains exceptionally challenging. Real robot data suffers from occlusions, noisy camera poses, dynamic scene elements, which hinder the creation of geometrically accurate and photorealistic digital twins of unseen objects. We introduce a novel real-to-sim framework tackling all these challenges at once. Our key insight is a hybrid scene representation merging the photorealistic rendering of 3D Gaussian Splatting with explicit object meshes suitable for physics simulation within a single representation. We propose an end-to-end optimization pipeline that leverages differentiable rendering and differentiable physics within MuJoCo to jointly refine all scene components - from object geometry and appearance to robot poses and physical parameters - directly from raw and imprecise robot trajectories. This unified optimization allows us to simultaneously achieve high-fidelity object mesh reconstruction, generate photorealistic novel views, and perform annotation-free robot pose calibration. We demonstrate the effectiveness of our approach both in simulation and on challenging real-world sequences using an ALOHA 2 bi-manual manipulator, enabling more practical and robust real-to-simulation pipelines.

Real-to-sim conversion for robotic interaction with objects remains labor-intensive because it requires more than visual reconstruction: a streamlined real2sim process must recover scene geometries and object states, infer physical parameters, and assemble actors, objects, cameras, poses, and trajectories into a runnable physical simulation. Today this process still depends on manual tuning of visual foundation models, mesh cleanup, coordinate-frame alignment, and brittle workflow glue across visual perception tools and simulators. We introduce Agentic Real2Sim, a framework for generalized physical world modeling with vision-language agents, converting a real-world recording of object-robot interaction into a simulatable episodic twin which preserves observations, geometries, robot interactions, and object states. We evaluate Agentic Real2Sim on rigid-object manipulation, deformable-object interaction, and humanoid motion scenes, spanning domains that are usually handled by separate Real2Sim pipelines, marking a first step toward scalable conversion. The framework's agentic decisions can be driven by an open-weight VLM backend at a small fraction of the cost of frontier models, while attaining comparable conversion success rate. We aim to use the resulting real-world-aligned twins for downstream robotics tasks, specifically policy learning and evaluation. The project site is available at https://agentic-real2sim.github.io/.

The spatiotemporal resolution of Partial Differential Equations (PDEs) plays important roles in the mathematical description of the world's physical phenomena. In general, scientists and engineers solve PDEs numerically by the use of computationally demanding solvers. Recently, deep learning algorithms have emerged as a viable alternative for obtaining fast solutions for PDEs. Models are usually trained on synthetic data generated by solvers, stored on disk and read back for training. This paper advocates that relying on a traditional static dataset to train these models does not allow the full benefit of the solver to be used as a data generator. It proposes an open source online training framework for deep surrogate models. The framework implements several levels of parallelism focused on simultaneously generating numerical simulations and training deep neural networks. This approach suppresses the I/O and storage bottleneck associated with disk-loaded datasets, and opens the way to training on significantly larger datasets. Experiments compare the offline and online training of four surrogate models, including state-of-the-art architectures. Results indicate that exposing deep surrogate models to more dataset diversity, up to hundreds of GB, can increase model generalization capabilities. Fully connected neural networks, Fourier Neural Operator (FNO), and Message Passing PDE Solver prediction accuracy is improved by 68%, 16% and 7%, respectively.

Data-free meta-learning (DFML) aims to enable efficient learning of new tasks by meta-learning from a collection of pre-trained models without access to the training data. Existing DFML work can only meta-learn from (i) white-box and (ii) small-scale pre-trained models (iii) with the same architecture, neglecting the more practical setting where the users only have inference access to the APIs with arbitrary model architectures and model scale inside. To solve this issue, we propose a Bi-level Data-free Meta Knowledge Distillation (BiDf-MKD) framework to transfer more general meta knowledge from a collection of black-box APIs to one single meta model. Specifically, by just querying APIs, we inverse each API to recover its training data via a zero-order gradient estimator and then perform meta-learning via a novel bi-level meta knowledge distillation structure, in which we design a boundary query set recovery technique to recover a more informative query set near the decision boundary. In addition, to encourage better generalization within the setting of limited API budgets, we propose task memory replay to diversify the underlying task distribution by covering more interpolated tasks. Extensive experiments in various real-world scenarios show the superior performance of our BiDf-MKD framework.

Recently, conditional diffusion models have gained popularity in numerous applications due to their exceptional generation ability. However, many existing methods are training-required. They need to train a time-dependent classifier or a condition-dependent score estimator, which increases the cost of constructing conditional diffusion models and is inconvenient to transfer across different conditions. Some current works aim to overcome this limitation by proposing training-free solutions, but most can only be applied to a specific category of tasks and not to more general conditions. In this work, we propose a training-Free conditional Diffusion Model (FreeDoM) used for various conditions. Specifically, we leverage off-the-shelf pre-trained networks, such as a face detection model, to construct time-independent energy functions, which guide the generation process without requiring training. Furthermore, because the construction of the energy function is very flexible and adaptable to various conditions, our proposed FreeDoM has a broader range of applications than existing training-free methods. FreeDoM is advantageous in its simplicity, effectiveness, and low cost. Experiments demonstrate that FreeDoM is effective for various conditions and suitable for diffusion models of diverse data domains, including image and latent code domains.

A common belief in model-free reinforcement learning is that methods based on random search in the parameter space of policies exhibit significantly worse sample complexity than those that explore the space of actions. We dispel such beliefs by introducing a random search method for training static, linear policies for continuous control problems, matching state-of-the-art sample efficiency on the benchmark MuJoCo locomotion tasks. Our method also finds a nearly optimal controller for a challenging instance of the Linear Quadratic Regulator, a classical problem in control theory, when the dynamics are not known. Computationally, our random search algorithm is at least 15 times more efficient than the fastest competing model-free methods on these benchmarks. We take advantage of this computational efficiency to evaluate the performance of our method over hundreds of random seeds and many different hyperparameter configurations for each benchmark task. Our simulations highlight a high variability in performance in these benchmark tasks, suggesting that commonly used estimations of sample efficiency do not adequately evaluate the performance of RL algorithms.

The scalability of robotic learning is fundamentally bottlenecked by the significant cost and labor of real-world data collection. While simulated data offers a scalable alternative, it often fails to generalize to the real world due to significant gaps in visual appearance, physical properties, and object interactions. To address this, we propose RoboSimGS, a novel Real2Sim2Real framework that converts multi-view real-world images into scalable, high-fidelity, and physically interactive simulation environments for robotic manipulation. Our approach reconstructs scenes using a hybrid representation: 3D Gaussian Splatting (3DGS) captures the photorealistic appearance of the environment, while mesh primitives for interactive objects ensure accurate physics simulation. Crucially, we pioneer the use of a Multi-modal Large Language Model (MLLM) to automate the creation of physically plausible, articulated assets. The MLLM analyzes visual data to infer not only physical properties (e.g., density, stiffness) but also complex kinematic structures (e.g., hinges, sliding rails) of objects. We demonstrate that policies trained entirely on data generated by RoboSimGS achieve successful zero-shot sim-to-real transfer across a diverse set of real-world manipulation tasks. Furthermore, data from RoboSimGS significantly enhances the performance and generalization capabilities of SOTA methods. Our results validate RoboSimGS as a powerful and scalable solution for bridging the sim-to-real gap.

The Polymorphic Combinatorial Framework (PCF) leverages Large Language Models (LLMs) and mathematical frameworks to guide the meta-prompt enabled design of solution spaces and adaptive AI agents for complex, dynamic environments. Unlike static agent architectures, PCF enables real-time parameter reconfiguration through mathematically-grounded combinatorial spaces, allowing agents to adapt their core behavioral traits dynamically. Grounded in combinatorial logic, topos theory, and rough fuzzy set theory, PCF defines a multidimensional SPARK parameter space (Skills, Personalities, Approaches, Resources, Knowledge) to capture agent behaviors. This paper demonstrates how LLMs can parameterize complex spaces and estimate likely parameter values/variabilities. Using PCF, we parameterized mock caf\'e domains (five levels of complexity), estimated variables/variabilities, and conducted over 1.25 million Monte Carlo simulations. The results revealed trends in agent adaptability and performance across the five complexity tiers, with diminishing returns at higher complexity levels highlighting thresholds for scalable designs. PCF enables the generation of optimized agent configurations for specific scenarios while maintaining logical consistency. This framework supports scalable, dynamic, explainable, and ethical AI applications in domains like customer service, healthcare, robotics, and collaborative systems, paving the way for adaptable and cooperative next-generation polymorphic agents.

Foundation models have achieved remarkable success across video, image, and language domains. By scaling up the number of parameters and training datasets, these models acquire generalizable world knowledge and often surpass task-specific approaches. However, such progress has yet to extend to the domain of physics simulation. A primary bottleneck is data scarcity: while millions of images, videos, and textual resources are readily available on the internet, the largest physics simulation datasets contain only tens of thousands of samples. This data limitation hinders the use of large models, as overfitting becomes a major concern. As a result, physics applications typically rely on small models, which struggle with long-range prediction due to limited context understanding. Additionally, unlike images, videos, or text-which typically exhibit fixed granularity-physics datasets often vary drastically in scale, amplifying the challenges of scaling up multitask training. We introduce PhysiX, the first large-scale foundation model for physics simulation. PhysiX is a 4.5B parameter autoregressive generative model. It uses a discrete tokenizer to encode physical processes at different scales into a sequence of discrete tokens, and employs an autoregressive next-token prediction objective to model such processes in the token space. To mitigate the rounding error in the discretization process, PhysiX incorporates a specialized refinement module. Through extensive experiments, we show that PhysiX effectively addresses the data bottleneck, outperforming task-specific baselines under comparable settings as well as the previous absolute state-of-the-art approaches on The Well benchmark. Our results indicate that knowledge learned from natural videos can be successfully transferred to physics simulation, and that joint training across diverse simulation tasks enables synergistic learning.

Realistic simulation of dynamic scenes requires accurately capturing diverse material properties and modeling complex object interactions grounded in physical principles. However, existing methods are constrained to basic material types with limited predictable parameters, making them insufficient to represent the complexity of real-world materials. We introduce a novel approach that leverages multi-modal foundation models and video diffusion to achieve enhanced 4D dynamic scene simulation. Our method utilizes multi-modal models to identify material types and initialize material parameters through image queries, while simultaneously inferring 3D Gaussian splats for detailed scene representation. We further refine these material parameters using video diffusion with a differentiable Material Point Method (MPM) and optical flow guidance rather than render loss or Score Distillation Sampling (SDS) loss. This integrated framework enables accurate prediction and realistic simulation of dynamic interactions in real-world scenarios, advancing both accuracy and flexibility in physics-based simulations.

Robust control policy learning for autonomous driving requires training environments to be both physically realistic and computationally scalable, properties that existing simulators provide only in isolation. We introduce Sim2Sim2Sim, a framework that bridges high-fidelity vehicle simulation and scalable reinforcement learning by distilling simulator dynamics into a highly parallelizable learned dynamics model. By training control policies purely within this distilled environment and deploying them back into the high-fidelity source simulator, we demonstrate more efficient policy optimization and reliable transfer under challenging dynamics. We further show that predictive accuracy alone does not fully characterize a learned dynamics model's suitability as a reinforcement learning training environment, which should also be assessed by the quality of the policies it enables.

Generative machine learning methods, such as diffusion models and flow matching, have shown great potential in modeling complex system behaviors and building efficient surrogate models. However, these methods typically learn the underlying physics implicitly from data. We propose Physics-Based Flow Matching (PBFM), a novel generative framework that explicitly embeds physical constraints, both PDE residuals and algebraic relations, into the flow matching objective. We also introduce temporal unrolling at training time that improves the accuracy of the final, noise-free sample prediction. Our method jointly minimizes the flow matching loss and the physics-based residual loss without requiring hyperparameter tuning of their relative weights. Additionally, we analyze the role of the minimum noise level, sigma_{min}, in the context of physical constraints and evaluate a stochastic sampling strategy that helps to reduce physical residuals. Through extensive benchmarks on three representative PDE problems, we show that our approach yields up to an 8times more accurate physical residuals compared to FM, while clearly outperforming existing algorithms in terms of distributional accuracy. PBFM thus provides a principled and efficient framework for surrogate modeling, uncertainty quantification, and accelerated simulation in physics and engineering applications.

Simulation plays a crucial role in the development of autonomous vehicles (AVs) due to the potential risks associated with real-world testing. Although significant progress has been made in the visual aspects of simulators, generating complex behavior among agents remains a formidable challenge. It is not only imperative to ensure realism in the scenarios generated but also essential to incorporate preferences and conditions to facilitate controllable generation for AV training and evaluation. Traditional methods, mainly relying on memorizing the distribution of training datasets, often fall short in generating unseen scenarios. Inspired by the success of retrieval augmented generation in large language models, we present RealGen, a novel retrieval-based in-context learning framework for traffic scenario generation. RealGen synthesizes new scenarios by combining behaviors from multiple retrieved examples in a gradient-free way, which may originate from templates or tagged scenarios. This in-context learning framework endows versatile generative capabilities, including the ability to edit scenarios, compose various behaviors, and produce critical scenarios. Evaluations show that RealGen offers considerable flexibility and controllability, marking a new direction in the field of controllable traffic scenario generation. Check our project website for more information: https://realgen.github.io.

Foundation models are typically trained in stages: pretraining, midtraining, supervised fine-tuning (SFT), and reinforcement learning (RL), with changes in both data and learning algorithms. We show that this algorithmic separation is not fundamental. By deriving suitable RL objectives as maximum-likelihood fitting to model-generated target distributions, we place all of these stages under a single likelihood-based training algorithm, unified training. This perspective turns the foundation-model training lifecycle into a problem of choosing which data to train on, in what proportions, and when, with conventional staged training as a special case. We instantiate this framework in a unified training system that mixes static data and RL generations within a single trainer. Across controlled and real-world experiments, unified training improves the accuracy-compute tradeoff and task coverage while preserving broader capabilities, and provides a stronger starting point for continual learning. This work lays the groundwork for a unified science of foundation-model training, connecting mathematical principles, training infrastructure, and the development of model capabilities.

We propose a new uncertainty estimator for gradient-free optimisation of black-box simulators using deep generative surrogate models. Optimisation of these simulators is especially challenging for stochastic simulators and higher dimensions. To address these issues, we utilise a deep generative surrogate approach to model the black box response for the entire parameter space. We then leverage this knowledge to estimate the proposed uncertainty based on the Wasserstein distance - the Wasserstein uncertainty. This approach is employed in a posterior agnostic gradient-free optimisation algorithm that minimises regret over the entire parameter space. A series of tests were conducted to demonstrate that our method is more robust to the shape of both the black box function and the stochastic response of the black box than state-of-the-art methods, such as efficient global optimisation with a deep Gaussian process surrogate.

Learning-based simulation of multi-object rigid-body dynamics remains difficult because contact is discontinuous and errors compound over long horizons. Most existing methods remain tied to mesh connectivity and vertex-level message passing, which limits their applicability to mesh-free inputs such as point clouds and leads to high computational cost. Efficiently modeling high-fidelity rigid-body dynamics from mesh-free representations, therefore, remains challenging. We introduce RigidFormer, an object-centric Transformer-based model that learns mesh-free rigid-body dynamics with controllable integration step sizes. RigidFormer reasons at the object level and advances each object through compact anchors; Anchor-Vertex Pooling enriches these anchors with local vertex features, retaining contact-relevant geometry without dense vertex-level interaction. We propose Anchor-based RoPE to inject anchor geometry into attention while respecting the unordered nature of objects and anchors: object-token processing is permutation-equivariant, and the mean-pooled anchor descriptor is invariant to anchor reindexing while preserving shape extent. RigidFormer further enforces rigidity by projecting updates onto the rigid-body manifold using differentiable Kabsch alignment. On standard benchmarks, RigidFormer outperforms or matches mesh-based baselines using point inputs, runs faster, generalizes to unseen point resolutions and across datasets, and scales to 200+ objects; we also show a preliminary extension to command-conditioned articulated bodies by treating body parts as interacting object-level components.

3D modeling is shifting from static visual representations toward physical, articulated assets that can be directly used in simulation and interaction. However, most existing 3D generation methods overlook key physical and articulation properties, thereby limiting their utility in embodied AI. To bridge this gap, we introduce PhysX-Anything, the first simulation-ready physical 3D generative framework that, given a single in-the-wild image, produces high-quality sim-ready 3D assets with explicit geometry, articulation, and physical attributes. Specifically, we propose the first VLM-based physical 3D generative model, along with a new 3D representation that efficiently tokenizes geometry. It reduces the number of tokens by 193x, enabling explicit geometry learning within standard VLM token budgets without introducing any special tokens during fine-tuning and significantly improving generative quality. In addition, to overcome the limited diversity of existing physical 3D datasets, we construct a new dataset, PhysX-Mobility, which expands the object categories in prior physical 3D datasets by over 2x and includes more than 2K common real-world objects with rich physical annotations. Extensive experiments on PhysX-Mobility and in-the-wild images demonstrate that PhysX-Anything delivers strong generative performance and robust generalization. Furthermore, simulation-based experiments in a MuJoCo-style environment validate that our sim-ready assets can be directly used for contact-rich robotic policy learning. We believe PhysX-Anything can substantially empower a broad range of downstream applications, especially in embodied AI and physics-based simulation.

Automating biological laboratories requires robots to perform dexterous tool interactions under realistic visual conditions while handling dynamic experimental phenomena, presenting significant challenges for robotic manipulation. To enable systematic evaluation under these conditions, we introduce DexBioLab, a simulation benchmark and framework for dexterous manipulation in realistic biological laboratory environments. DexBioLab comprises 14 tasks across 4 robot embodiments, spanning functional tool use, precision manipulation, language-conditioned visual grounding, and instrument operation. We introduce controllable dynamic experimental phenomena, including flames, vapor, and bubbles, to capture the evolving visual conditions of laboratory procedures. To further enhance environmental realism, we develop a hybrid rendering pipeline that integrates interactive simulated foreground objects with Gaussian-splatting backgrounds reconstructed from 6 real laboratory scenes. For efficient large-scale data generation and evaluation, we further build a parallel simulation framework on top of mjlab, proposing Parallel Finite-State Machine (PFSM) and integrating batched rendering with decoupled trajectory replay for demonstration generation and model-independent closed-loop policy evaluation. Our evaluation reveals substantial variation in policy performance across tasks, exposing distinct strengths and weaknesses of current manipulation policies. Real-world experiments further demonstrate a reduced sim-to-real gap, supporting the validity of AutoBio+ for realistic manipulation evaluation. Supplementary materials are available at https://cumulusalpha.github.io/DexBioLabWebPage.

Model-free reinforcement learning algorithms can compute policy gradients given sampled environment transitions, but require large amounts of data. In contrast, model-based methods can use the learned model to generate new data, but model errors and bias can render learning unstable or suboptimal. In this paper, we present a novel method that combines real-world data and a learned model in order to get the best of both worlds. The core idea is to exploit the real-world data for on-policy predictions and use the learned model only to generalize to different actions. Specifically, we use the data as time-dependent on-policy correction terms on top of a learned model, to retain the ability to generate data without accumulating errors over long prediction horizons. We motivate this method theoretically and show that it counteracts an error term for model-based policy improvement. Experiments on MuJoCo- and PyBullet-benchmarks show that our method can drastically improve existing model-based approaches without introducing additional tuning parameters.

Data-driven learning approaches for physics simulation, sometimes referred to as world models, have emerged as promising alternatives to traditional physics simulators due to their differentiable nature. Prior work has demonstrated impressive results in predicting the motions of rigid and non-rigid objects in complex scenes involving multiple interacting bodies. However, these models are typically trained in simulated environments because obtaining perfect state information such as complete scene point clouds and point correspondences over time is challenging in real-world settings. This reliance on synthetic data can limit their applicability when the sim-to-real gap is large. In this work, we aim to overcome these limitations by introducing a novel framework for training neural object dynamics models directly from unlabeled real-world videos. Specifically, we propose to learn a particle-based dynamics model compatible with a Gaussian splatting framework, which operates on dense particles derived from Gaussians (i.e., particles with scales and rotations) and predicts their position and rotation changes over time. The model is trained via rendering supervision, enabling learning from real-world videos without requiring particle-level labeled states. Our model operates directly on dense Gaussians without relying on heuristic subsampling anchor points. To enable this study, we also present a real-world dataset consisting of about 500 videos capturing diverse object interactions.

Consider learning a policy from example expert behavior, without interaction with the expert or access to reinforcement signal. One approach is to recover the expert's cost function with inverse reinforcement learning, then extract a policy from that cost function with reinforcement learning. This approach is indirect and can be slow. We propose a new general framework for directly extracting a policy from data, as if it were obtained by reinforcement learning following inverse reinforcement learning. We show that a certain instantiation of our framework draws an analogy between imitation learning and generative adversarial networks, from which we derive a model-free imitation learning algorithm that obtains significant performance gains over existing model-free methods in imitating complex behaviors in large, high-dimensional environments.

We introduce CADFS, a data-centric framework that enables large vision-language models to generate complex CAD design histories. Existing generative CAD systems are restricted to sketch-extrude operations due to simplified representations and limited datasets. We address this by introducing a FeatureScript-based representation and constructing a dataset of 450k real-world CAD models spanning 15 modeling operations. We obtain the dataset via a new pipeline that reconstructs clean, executable FeatureScript programs and provides multimodal annotations. Fine-tuning a VLM on this representation yields state-of-the-art results in text-conditioned CAD generation and image-based reconstruction, producing more accurate, diverse, and feature-rich designs than prior frameworks. Ablations show that each individual component of our framework, i.e., the FeatureScript representation, the extended operation set, and representation-aligned textual descriptions, significantly improves performance. Our framework substantially broadens the complexity and realism achievable in generative CAD. The CADFS framework and the new dataset are available at https://voyleg.github.io/cadfs/.

Symbolic world modeling requires inferring and representing an environment's transitional dynamics as an executable program. Prior work has focused on largely deterministic environments with abundant interaction data, simple mechanics, and human guidance. We address a more realistic and challenging setting, learning in a complex, stochastic environment where the agent has only "one life" to explore a hostile environment without human guidance. We introduce OneLife, a framework that models world dynamics through conditionally-activated programmatic laws within a probabilistic programming framework. Each law operates through a precondition-effect structure, activating in relevant world states. This creates a dynamic computation graph that routes inference and optimization only through relevant laws, avoiding scaling challenges when all laws contribute to predictions about a complex, hierarchical state, and enabling the learning of stochastic dynamics even with sparse rule activation. To evaluate our approach under these demanding constraints, we introduce a new evaluation protocol that measures (a) state ranking, the ability to distinguish plausible future states from implausible ones, and (b) state fidelity, the ability to generate future states that closely resemble reality. We develop and evaluate our framework on Crafter-OO, our reimplementation of the Crafter environment that exposes a structured, object-oriented symbolic state and a pure transition function that operates on that state alone. OneLife can successfully learn key environment dynamics from minimal, unguided interaction, outperforming a strong baseline on 16 out of 23 scenarios tested. We also test OneLife's planning ability, with simulated rollouts successfully identifying superior strategies. Our work establishes a foundation for autonomously constructing programmatic world models of unknown, complex environments.

Flow-based methods have achieved significant success in various generative modeling tasks, capturing nuanced details within complex data distributions. However, few existing works have exploited this unique capability to resolve fine-grained structural details beyond generation tasks. This paper presents a flow-inspired framework for representation learning. First, we demonstrate that a rectified flow trained using independent coupling is zero everywhere at t=0.5 if and only if the source and target distributions are identical. We term this property the zero-flow criterion. Second, we show that this criterion can certify conditional independence, thereby extracting sufficient information from the data. Third, we translate this criterion into a tractable, simulation-free loss function that enables learning amortized Markov blankets in graphical models and latent representations in self-supervised learning tasks. Experiments on both simulated and real-world datasets demonstrate the effectiveness of our approach. The code reproducing our experiments can be found at: https://github.com/probabilityFLOW/zfe.

Feed-forward 3D reconstruction models are efficient but rigid: once trained, they perform inference in a zero-shot manner and cannot adapt to the test scene. As a result, visually plausible reconstructions often contain errors, particularly under occlusions, specularities, and ambiguous cues. To address this, we introduce Free Geometry, a framework that enables feed-forward 3D reconstruction models to self-evolve at test time without any 3D ground truth. Our key insight is that, when the model receives more views, it produces more reliable and view-consistent reconstructions. Leveraging this property, given a testing sequence, we mask a subset of frames to construct a self-supervised task. Free Geometry enforces cross-view feature consistency between representations from full and partial observations, while maintaining the pairwise relations implied by the held-out frames. This self-supervision allows for fast recalibration via lightweight LoRA updates, taking less than 2 minutes per dataset on a single GPU. Our approach consistently improves state-of-the-art foundation models, including Depth Anything 3 and VGGT, across 4 benchmark datasets, yielding an average improvement of 3.73% in camera pose accuracy and 2.88% in point map prediction. Code is available at https://github.com/hiteacherIamhumble/Free-Geometry .

This work presents Fair4Free, a novel generative model to generate synthetic fair data using data-free distillation in the latent space. Fair4Free can work on the situation when the data is private or inaccessible. In our approach, we first train a teacher model to create fair representation and then distil the knowledge to a student model (using a smaller architecture). The process of distilling the student model is data-free, i.e. the student model does not have access to the training dataset while distilling. After the distillation, we use the distilled model to generate fair synthetic samples. Our extensive experiments show that our synthetic samples outperform state-of-the-art models in all three criteria (fairness, utility and synthetic quality) with a performance increase of 5% for fairness, 8% for utility and 12% in synthetic quality for both tabular and image datasets.

The increasing computational demands of foundation models have spurred research into low-precision training, with 4-bit floating-point (FP4) formats emerging as a frontier for maximizing hardware throughput. While numerous techniques have been proposed to stabilize FP4 training, they often present isolated solutions with varying, and not always clear, computational overheads. This paper aims to provide a unified view of the design space of FP4 training. We introduce a comprehensive, quantisation gradient-based framework for microscaling quantization that allows for a theoretical analysis of the computational costs associated with different stabilization methods on both the forward and backward passes. Using a simulator built on this framework, we conduct an extensive empirical study across a wide range of machine learning tasks, including regression, image classification, diffusion models, and language models. By systematically evaluating thousands of combinations of techniques, such as novel gradient approximations, rounding strategies, and scaling methods, we identify which configurations offer the most favourable performance-to-overhead trade-off. We find that the techniques enabling the best trade-off involve carefully combining Hadamard transformations, tensor scaling and stochastic rounding. We further find that using UE5M3 as a scaling factor potentially offers a good compromise between range and precision with manageable computational overhead.

Machine learning-based surrogate models have emerged as a powerful tool to accelerate simulation-driven scientific workflows. However, their widespread adoption is hindered by the lack of large-scale, diverse, and standardized datasets tailored to physics-based simulations. While existing initiatives provide valuable contributions, many are limited in scope-focusing on specific physics domains, relying on fragmented tooling, or adhering to overly simplistic datamodels that restrict generalization. To address these limitations, we introduce PLAID (Physics-Learning AI Datamodel), a flexible and extensible framework for representing and sharing datasets of physics simulations. PLAID defines a unified standard for describing simulation data and is accompanied by a library for creating, reading, and manipulating complex datasets across a wide range of physical use cases (gitlab.com/drti/plaid). We release six carefully crafted datasets under the PLAID standard, covering structural mechanics and computational fluid dynamics, and provide baseline benchmarks using representative learning methods. Benchmarking tools are made available on Hugging Face, enabling direct participation by the community and contribution to ongoing evaluation efforts (huggingface.co/PLAIDcompetitions).

The dynamics of cells, organisms, and fluids are often modeled as probability distributions evolving over time. Reconstructing and extrapolating this evolution from unpaired snapshots requires assumptions about the underlying process. Wasserstein gradient flows are a common choice, but they cannot describe conservative or periodic dynamics. Lagrangian mechanics in Wasserstein space covers both, but existing methods for learning it are simulation-based: they run a numerical solver at every training step, which makes training expensive. We propose Double-Stitch, a simulation-free method that learns these mechanics by penalizing the residual of the equation of motion along a learned population path. We derive this equation from a Clebsch variational principle that does not require gradient velocities, and show that the residual vanishes exactly when the equation holds. We test Double-Stitch on synthetic, single-cell and ocean vortex datasets and find that it matches or outperforms gradient-flow methods and simulation-based WLM on most tasks, while training 4-14 times faster than WLM. We provide a JAX implementation of Double-Stitch at https://github.com/BasisResearch/stitching.

Large language models store all learned knowledge in a single, fixed weight vector. Teaching a model new capabilities requires modifying those same weights, inevitably degrading previously acquired knowledge. This fundamental limitation, known as catastrophic forgetting, has resisted principled solutions for decades. Existing approaches treat weights as immutable artifacts that must be protected through techniques like regularization heuristics, replay buffers, or isolated adapter modules. The problem is none of these provide a structural guarantee against forgetting. In this work, we propose Non-Interfering Weight Fields (NIWF), a framework that replaces the fixed weight paradigm with a learned function that generates weight configurations on demand from a continuous capability coordinate space. After training on a task, we commit the occupied coordinate region by snapshotting the fields outputs on anchor points to enforce a functional lock during all future training. We validate NIWF on sequential instructionfollowing and code generation tasks using Mistral-7B, demonstrating zero forgetting on committed tasks with competitive perplexity on new tasks. The framework introduces the notion of software-like versioning for neural network intelligence, where capabilities can be committed, extended, composed, and rolled back without retraining.

In this work, we introduce ChemBFN, a language model that handles chemistry tasks based on Bayesian flow networks working on discrete data. A new accuracy schedule is proposed to improve the sampling quality by significantly reducing the reconstruction loss. We show evidence that our method is appropriate for generating molecules with satisfied diversity even when a smaller number of sampling steps is used. A classifier-free guidance method is adapted for conditional generation. It is also worthwhile to point out that after generative training, our model can be fine-tuned on regression and classification tasks with the state-of-the-art performance, which opens the gate of building all-in-one models in a single module style. Our model has been open sourced at https://github.com/Augus1999/bayesian-flow-network-for-chemistry.

Offline reinforcement learning aims to train agents from pre-collected datasets. However, this comes with the added challenge of estimating the value of behaviors not covered in the dataset. Model-based methods offer a potential solution by training an approximate dynamics model, which then allows collection of additional synthetic data via rollouts in this model. The prevailing theory treats this approach as online RL in an approximate dynamics model, and any remaining performance gap is therefore understood as being due to dynamics model errors. In this paper, we analyze this assumption and investigate how popular algorithms perform as the learned dynamics model is improved. In contrast to both intuition and theory, if the learned dynamics model is replaced by the true error-free dynamics, existing model-based methods completely fail. This reveals a key oversight: The theoretical foundations assume sampling of full horizon rollouts in the learned dynamics model; however, in practice, the number of model-rollout steps is aggressively reduced to prevent accumulating errors. We show that this truncation of rollouts results in a set of edge-of-reach states at which we are effectively ``bootstrapping from the void.'' This triggers pathological value overestimation and complete performance collapse. We term this the edge-of-reach problem. Based on this new insight, we fill important gaps in existing theory, and reveal how prior model-based methods are primarily addressing the edge-of-reach problem, rather than model-inaccuracy as claimed. Finally, we propose Reach-Aware Value Learning (RAVL), a simple and robust method that directly addresses the edge-of-reach problem and hence - unlike existing methods - does not fail as the dynamics model is improved. Code open-sourced at: github.com/anyasims/edge-of-reach.

Action-conditioned robot world models must respond precisely to robot trajectories while preserving realistic visual dynamics, yet learning both from heterogeneous robot videos remains challenging. Simulation offers structured motion supervision, but appearance differences hinder direct transfer, and inaccurate simulation predictions can misguide real-video generation. We present SimForcing, a simulation-guided framework that uses simulation both as a source of transferable motion knowledge and as a controllable reference for prediction. First, we transfer motion knowledge from a simulation teacher through latent-motion distillation, aligning temporal changes in latent space to internalize motion priors while mitigating the influence of appearance differences. Second, we introduce multi-block simulation conditioning with condition dropout to exploit predicted simulation trajectories without relying excessively on their accuracy. Our simulation-conditioning classifier-free guidance scheme unifies these two ideas by balancing predictions based on internalized motion knowledge with those additionally guided by simulation latents. The jointly trained student generates both simulation conditions and real-domain videos, requiring no additional world model at inference. On Bridge, SimForcing achieves the best PSNR, SSIM, LPIPS, and FVD among the compared methods without external embodied pretraining. Evaluation on InternData-A1 further supports its applicability across robot datasets. Moreover, using our trained world model to initialize a vision-language-action model improves LIBERO success, suggesting its utility for downstream policy learning. https://github.com/Wang-Xiaodong1899/SimForcing

While multi-view 3D reconstruction has shifted toward large-scale foundation models capable of inferring globally consistent geometry, their reliance on massive computational clusters for training has created a significant barrier to entry for most academic laboratories. To bridge this compute divide, we introduce Distill3R, a framework designed to distill the geometric reasoning of 3D foundation models into compact students fully trainable on a single workstation. Our methodology centers on two primary innovations: (1) an offline caching pipeline that decouples heavy teacher inference from the training loop through compressed supervision signals, and (2) a confidence-aware distillation loss that leverages teacher uncertainty to enable training on commodity hardware. We propose a 72M-parameter student model which achieves a 9x reduction in parameters and a 5x inference speedup compared to its 650M-parameter teacher. The student is fully trainable in under 3 days on a single workstation, whereas its teacher requires massive GPU clusters for up to a week. We demonstrate that the student preserves the structural consistency and qualitative geometric understanding required for functional 3D awareness. By providing a reproducible, single-workstation training recipe, Distill3R serves as an exploratory entry point for democratized 3D vision research and efficient edge deployment. This work is not intended to compete with state-of-the-art foundation models, but to provide an accessible research baseline for laboratories without access to large-scale compute to train and specialize models on their own domain-specific data at minimal cost.

Reinforcement learning is able to solve complex sequential decision-making tasks but is currently limited by sample efficiency and required computation. To improve sample efficiency, recent work focuses on model-based RL which interleaves model learning with planning. Recent methods further utilize policy learning, value estimation, and, self-supervised learning as auxiliary objectives. In this paper we show that, surprisingly, a simple representation learning approach relying only on a latent dynamics model trained by latent temporal consistency is sufficient for high-performance RL. This applies when using pure planning with a dynamics model conditioned on the representation, but, also when utilizing the representation as policy and value function features in model-free RL. In experiments, our approach learns an accurate dynamics model to solve challenging high-dimensional locomotion tasks with online planners while being 4.1 times faster to train compared to ensemble-based methods. With model-free RL without planning, especially on high-dimensional tasks, such as the DeepMind Control Suite Humanoid and Dog tasks, our approach outperforms model-free methods by a large margin and matches model-based methods' sample efficiency while training 2.4 times faster.

Web agents require massive trajectories to generalize, yet real-world training is constrained by network latency, rate limits, and safety risks. We introduce WebWorld series, the first open-web simulator trained at scale. While existing simulators are restricted to closed environments with thousands of trajectories, WebWorld leverages a scalable data pipeline to train on 1M+ open-web interactions, supporting reasoning, multi-format data, and long-horizon simulations of 30+ steps. For intrinsic evaluation, we introduce WebWorld-Bench with dual metrics spanning nine dimensions, where WebWorld achieves simulation performance comparable to Gemini-3-Pro. For extrinsic evaluation, Qwen3-14B trained on WebWorld-synthesized trajectories improves by +9.2\% on WebArena, reaching performance comparable to GPT-4o. WebWorld enables effective inference-time search, outperforming GPT-5 as a world model. Beyond web simulation, WebWorld exhibits cross-domain generalization to code, GUI, and game environments, providing a replicable recipe for world model construction.

We introduce REAL, a benchmark and framework for multi-turn agent evaluations on deterministic simulations of real-world websites. REAL comprises high-fidelity, deterministic replicas of 11 widely-used websites across domains such as e-commerce, travel, communication, and professional networking. We also release a benchmark consisting of 112 practical tasks that mirror everyday complex user interactions requiring both accurate information retrieval and state-changing actions. All interactions occur within this fully controlled setting, eliminating safety risks and enabling robust, reproducible evaluation of agent capability and reliability. Our novel evaluation framework combines programmatic checks of website state for action-based tasks with rubric-guided LLM-based judgments for information retrieval. The framework supports both open-source and proprietary agent systems through a flexible evaluation harness that accommodates black-box commands within browser environments, allowing research labs to test agentic systems without modification. Our empirical results show that frontier language models achieve at most a 41% success rate on REAL, highlighting critical gaps in autonomous web navigation and task completion capabilities. Our framework supports easy integration of new tasks, reproducible evaluation, and scalable post-training data generation, marking a significant step forward in evaluating and advancing agent capabilities.

While self-supervised pretraining has reduced vision systems' reliance on synthetic data, simulation remains an indispensable tool for closed-loop optimization and rigorous out-of-distribution (OOD) evaluation. However, modern simulation platforms often present steep technical barriers, requiring extensive expertise in computer graphics and game development. In this work, we present LychSim, a highly controllable and interactive simulation framework built upon Unreal Engine 5 to bridge this gap. LychSim is built around three key designs: (1) a streamlined Python API that abstracts away underlying engine complexities; (2) a procedural data pipeline capable of generating diverse, high-fidelity environments with varying out-of-distribution (OOD) visual challenges, paired with rich 2D and 3D ground truths; and (3) a native integration of the Model Context Protocol (MCP) that transforms the simulator into a dynamic, closed-loop playground for reasoning agentic LLMs. We further annotate scene-level procedural rules and object-level pose alignments to enable semantically aligned 3D ground truths and automated scene modification. We demonstrate LychSim's capability across multiple downstream applications, including serving as a synthetic data engine, powering reinforcement learning-based adversarial examiners, and facilitating interactive, language-driven scene layout generation. To benefit the broader vision community, LychSim will be made publicly available, including full source code and various data annotations.

Learning-based methods, particularly Reinforcement Learning (RL), hold great promise for streamlining deployment, enhancing performance, and achieving generalization in the control of autonomous multirotor aerial vehicles. Deep RL has been able to control complex systems with impressive fidelity and agility in simulation but the simulation-to-reality transfer often brings a hard-to-bridge reality gap. Moreover, RL is commonly plagued by prohibitively long training times. In this work, we propose a novel asymmetric actor-critic-based architecture coupled with a highly reliable RL-based training paradigm for end-to-end quadrotor control. We show how curriculum learning and a highly optimized simulator enhance sample complexity and lead to fast training times. To precisely discuss the challenges related to low-level/end-to-end multirotor control, we also introduce a taxonomy that classifies the existing levels of control abstractions as well as non-linearities and domain parameters. Our framework enables Simulation-to-Reality (Sim2Real) transfer for direct RPM control after only 18 seconds of training on a consumer-grade laptop as well as its deployment on microcontrollers to control a multirotor under real-time guarantees. Finally, our solution exhibits competitive performance in trajectory tracking, as demonstrated through various experimental comparisons with existing state-of-the-art control solutions using a real Crazyflie nano quadrotor. We open source the code including a very fast multirotor dynamics simulator that can simulate about 5 months of flight per second on a laptop GPU. The fast training times and deployment to a cheap, off-the-shelf quadrotor lower the barriers to entry and help democratize the research and development of these systems.

This paper presents a framework that leverages pre-trained foundation models for robotic manipulation without domain-specific training. The framework integrates off-the-shelf models, combining multimodal perception from foundation models with a general-purpose reasoning model capable of robust task sequencing. Scene graphs, dynamically maintained within the framework, provide spatial awareness and enable consistent reasoning about the environment. The framework is evaluated through a series of tabletop robotic manipulation experiments, and the results highlight its potential for building robotic manipulation systems directly on top of off-the-shelf foundation models.

Here we present a machine learning framework and model implementation that can learn to simulate a wide variety of challenging physical domains, involving fluids, rigid solids, and deformable materials interacting with one another. Our framework---which we term "Graph Network-based Simulators" (GNS)---represents the state of a physical system with particles, expressed as nodes in a graph, and computes dynamics via learned message-passing. Our results show that our model can generalize from single-timestep predictions with thousands of particles during training, to different initial conditions, thousands of timesteps, and at least an order of magnitude more particles at test time. Our model was robust to hyperparameter choices across various evaluation metrics: the main determinants of long-term performance were the number of message-passing steps, and mitigating the accumulation of error by corrupting the training data with noise. Our GNS framework advances the state-of-the-art in learned physical simulation, and holds promise for solving a wide range of complex forward and inverse problems.

Model-free reinforcement learning (RL) can be used to learn effective policies for complex tasks, such as Atari games, even from image observations. However, this typically requires very large amounts of interaction -- substantially more, in fact, than a human would need to learn the same games. How can people learn so quickly? Part of the answer may be that people can learn how the game works and predict which actions will lead to desirable outcomes. In this paper, we explore how video prediction models can similarly enable agents to solve Atari games with fewer interactions than model-free methods. We describe Simulated Policy Learning (SimPLe), a complete model-based deep RL algorithm based on video prediction models and present a comparison of several model architectures, including a novel architecture that yields the best results in our setting. Our experiments evaluate SimPLe on a range of Atari games in low data regime of 100k interactions between the agent and the environment, which corresponds to two hours of real-time play. In most games SimPLe outperforms state-of-the-art model-free algorithms, in some games by over an order of magnitude.

The analysis of parametric and non-parametric uncertainties of very large dynamical systems requires the construction of a stochastic model of said system. Linear approaches relying on random matrix theory and principal componant analysis can be used when systems undergo low-frequency vibrations. In the case of fast dynamics and wave propagation, we investigate a random generator of boundary conditions for fast submodels by using machine learning. We show that the use of non-linear techniques in machine learning and data-driven methods is highly relevant. Physics-informed neural networks is a possible choice for a data-driven method to replace linear modal analysis. An architecture that support a random component is necessary for the construction of the stochastic model of the physical system for non-parametric uncertainties, since the goal is to learn the underlying probabilistic distribution of uncertainty in the data. Generative Adversarial Networks (GANs) are suited for such applications, where the Wasserstein-GAN with gradient penalty variant offers improved convergence results for our problem. The objective of our approach is to train a GAN on data from a finite element method code (Fenics) so as to extract stochastic boundary conditions for faster finite element predictions on a submodel. The submodel and the training data have both the same geometrical support. It is a zone of interest for uncertainty quantification and relevant to engineering purposes. In the exploitation phase, the framework can be viewed as a randomized and parametrized simulation generator on the submodel, which can be used as a Monte Carlo estimator.

Model-Free Reinforcement Learning (RL) algorithms either learn how to map states to expected rewards or search for policies that can maximize a certain performance function. Model-Based algorithms instead, aim to learn an approximation of the underlying model of the RL environment and then use it in combination with planning algorithms. Upside-Down Reinforcement Learning (UDRL) is a novel learning paradigm that aims to learn how to predict actions from states and desired commands. This task is formulated as a Supervised Learning problem and has successfully been tackled by Neural Networks (NNs). In this paper, we investigate whether function approximation algorithms other than NNs can also be used within a UDRL framework. Our experiments, performed over several popular optimal control benchmarks, show that tree-based methods like Random Forests and Extremely Randomized Trees can perform just as well as NNs with the significant benefit of resulting in policies that are inherently more interpretable than NNs, therefore paving the way for more transparent, safe, and robust RL.

We present Fluid-Gen-Zero, a training-free framework for physics-aware fluid-object interaction video generation that decouples physical reasoning from appearance synthesis. Our key insight is to delegate motion dynamics to a physics simulator while preserving the appearance modeling capacity of pretrained video generators. We bridge these two domains through a two-level agentic workflow: generation-time planning, where a vision-language model (VLM) agent interprets intent and the simulation rollout to organize generation clips, and latent-space guidance, which injects simulation signals into denoising through region-aware latent wrapping. This plug-and-play design is compatible with current video foundation models. We further introduce a benchmark for fluid-object interaction video generation. Across Tora (CogVideoX-based), VACE and WanMove (Wan-based), Fluid-Gen-Zero consistently improves simulation alignment, reducing object trajectory error by 26.7%-81.5% and fluid fEPE (fluid flow endpoint error) by 67.9%-84.0%, while largely preserving perceptual quality. In a human preference study, raters favor Fluid-Gen-Zero in 55.1%-74.4% of same-backbone comparisons across three backbones, and in 90.4%-94.2% of comparisons against simulation-based methods. Code and data will be released upon acceptance.

Estimating the uncertainty of responses of Large Language Models~(LLMs) remains a critical challenge. While recent Bayesian methods have demonstrated effectiveness in quantifying uncertainty through low-rank weight updates, they typically require complex fine-tuning or post-training procedures. In this paper, we propose Training-Free Bayesianization~(TFB), a novel framework that transforms existing off-the-shelf trained LoRA adapters into Bayesian ones without additional training. TFB systematically searches for the maximally acceptable level of variance in the weight posterior, constrained within a family of low-rank isotropic Gaussian distributions. We theoretically demonstrate that under mild conditions, this search process is equivalent to variational inference for the weights. Through comprehensive experiments, we show that TFB achieves superior uncertainty estimation and generalization compared to existing methods while eliminating the need for complex training procedures. Code will be available at https://github.com/Wang-ML-Lab/bayesian-peft.

Scaling robotic foundation models requires diverse training data and reliable evaluation environments. Simulation offers a scalable solution, yet existing generation pipelines remain constrained by predefined assets and skills, a disconnect between scene generation and task generation, and limited support for complex embodiments and physics. We introduce EmbodiedSmith, a framework for scalable embodied data generation through recursive self-improvement (RSI). EmbodiedSmith unifies asset, scene, and task generation in a pipeline that supports autonomous creation and language-driven customization. Its core is an agentic refinement loop: scene generation anticipates downstream task requirements, while task generation guides targeted scene edits, allowing scenes and tasks to iteratively improve one another. This joint refinement improves task generation success, including for long-horizon tasks. The framework further supports mobile manipulators, humanoids, and dexterous hands, as well as interactions involving deformable objects and fluids, broadening the range of behaviors and physical phenomena represented in generated data. Together, these capabilities provide a flexible simulation engine for both robot pretraining and evaluation. Extensive experiments validate the quality, diversity, and generation efficiency of the resulting data, while downstream policy experiments demonstrate that increased data diversity improves generalization.

The rising computational and energy demands of deep neural networks (DNNs), driven largely by backpropagation (BP), challenge sustainable AI development. This paper rigorously investigates three BP-free training methods: the Forward-Forward (FF), Cascaded-Forward (CaFo), and Mono-Forward (MF) algorithms, tracing their progression from foundational concepts to a demonstrably superior solution. A robust comparative framework was established: each algorithm was implemented on its native architecture (MLPs for FF and MF, a CNN for CaFo) and benchmarked against an equivalent BP-trained model. Hyperparameters were optimized with Optuna, and consistent early stopping criteria were applied based on validation performance, ensuring all models were optimally tuned before comparison. Results show that MF not only competes with but consistently surpasses BP in classification accuracy on its native MLPs. Its superior generalization stems from converging to a more favorable minimum in the validation loss landscape, challenging the assumption that global optimization is required for state-of-the-art results. Measured at the hardware level using the NVIDIA Management Library (NVML) API, MF reduces energy consumption by up to 41% and shortens training time by up to 34%, translating to a measurably smaller carbon footprint as estimated by CodeCarbon. Beyond this primary result, we present a hardware-level analysis that explains the efficiency gains: exposing FF's architectural inefficiencies, validating MF's computationally lean design, and challenging the assumption that all BP-free methods are inherently more memory-efficient. By documenting the evolution from FF's conceptual groundwork to MF's synthesis of accuracy and sustainability, this work offers a clear, data-driven roadmap for future energy-efficient deep learning.

Simulation-ready physical 3D assets have emerged as a promising direction owing to their broad applicability in downstream tasks. However, most existing 3D generation methods either neglect physical properties or are limited to a single asset category, e.g., rigid, deformable, or articulated objects. To address these limitations, we introduce PhysX-Omni, a unified framework for simulation-ready physical 3D generation across diverse asset types. Specifically, we develop a novel and efficient geometry representation tailored for Vision-Language Models, which directly encodes high-resolution 3D structures without compression, significantly improving generation performance. In addition, we construct the first general simulation-ready 3D dataset, PhysXVerse, covering diverse indoor and outdoor categories. Furthermore, to comprehensively and flexibly evaluate both generative and understanding capabilities in the wild, we propose PhysX-Bench, which encompasses six key attributes: geometry, absolute scale, material, affordance, kinematics, and function description. Extensive experiments with conventional metrics and PhysX-Bench show that PhysX-Omni performs strongly in both generation and understanding. Moreover, additional studies further validate the potential of PhysX-Omni for applications in simulation-ready scene generation and robotic policy learning. We believe PhysX-Omni can significantly advance a wide range of downstream applications, particularly in embodied AI and physics-based simulation.

Foundation models have revolutionized natural language processing through a ``train once, deploy anywhere'' paradigm, where a single pre-trained model adapts to countless downstream tasks without retraining. Access to a Physics Foundation Model (PFM) would be transformative -- democratizing access to high-fidelity simulations, accelerating scientific discovery, and eliminating the need for specialized solver development. Yet current physics-aware machine learning approaches remain fundamentally limited to single, narrow domains and require retraining for each new system. We present the General Physics Transformer (GPhyT), trained on 1.8 TB of diverse simulation data, that demonstrates foundation model capabilities are achievable for physics. Our key insight is that transformers can learn to infer governing dynamics from context, enabling a single model to simulate fluid-solid interactions, shock waves, thermal convection, and multi-phase dynamics without being told the underlying equations. GPhyT achieves three critical breakthroughs: (1) superior performance across multiple physics domains, outperforming specialized architectures by up to 29x, (2) zero-shot generalization to entirely unseen physical systems through in-context learning, and (3) stable long-term predictions through 50-timestep rollouts. By establishing that a single model can learn generalizable physical principles from data alone, this work opens the path toward a universal PFM that could transform computational science and engineering.

While achieving exceptional generative quality, modern diffusion, flow, and other matching models suffer from slow inference, as they require many steps of iterative generation. Recent distillation methods address this by training efficient one-step generators under the guidance of a pre-trained teacher model. However, these methods are often constrained to only one specific framework, e.g., only to diffusion or only to flow models. Furthermore, these methods are naturally data-free, and to benefit from the usage of real data, it is required to use an additional complex adversarial training with an extra discriminator model. In this paper, we present RealUID, a universal distillation framework for all matching models that seamlessly incorporates real data into the distillation procedure without GANs. Our RealUID approach offers a simple theoretical foundation that covers previous distillation methods for Flow Matching and Diffusion models, and is also extended to their modifications, such as Bridge Matching and Stochastic Interpolants. The code can be found in https://github.com/David-cripto/RealUID.

Robot learning requires adaptation methods that improve reliably from limited, mixed-quality interaction data. This is especially challenging in long-horizon, contact-rich tasks, where end-to-end policy finetuning remains inefficient and brittle. World models offer a compelling alternative: by predicting the outcomes of candidate action sequences, they enable online planning through counterfactual reasoning. However, training action-conditioned robotic world models directly in the real world requires diverse data at impractical scale. We introduce Simulation Distillation (SimDist), a framework that uses physics simulators as a scalable source of action-conditioned robot experience. During pretraining, SimDist distills structural priors from the simulator into a world model that enables planning from raw real-world observations. During real-world adaptation, SimDist transfers the encoder, reward model, and value function learned in simulation, and updates only the latent dynamics model using real-world prediction losses. This reduces adaptation to supervised system identification while preserving dense, long-horizon planning signals for online improvement. Across contact-rich manipulation and quadruped locomotion tasks, SimDist rapidly improves with experience, while prior adaptation methods struggle to make progress or degrade during online finetuning. Project website and code: https://sim-dist.github.io

Reinforcement learning (RL) promises a framework for near-universal problem-solving. In practice however, RL algorithms are often tailored to specific benchmarks, relying on carefully tuned hyperparameters and algorithmic choices. Recently, powerful model-based RL methods have shown impressive general results across benchmarks but come at the cost of increased complexity and slow run times, limiting their broader applicability. In this paper, we attempt to find a unifying model-free deep RL algorithm that can address a diverse class of domains and problem settings. To achieve this, we leverage model-based representations that approximately linearize the value function, taking advantage of the denser task objectives used by model-based RL while avoiding the costs associated with planning or simulated trajectories. We evaluate our algorithm, MR.Q, on a variety of common RL benchmarks with a single set of hyperparameters and show a competitive performance against domain-specific and general baselines, providing a concrete step towards building general-purpose model-free deep RL algorithms.

Behavior Foundation Models (BFMs) enable scalable imitation learning (IL) by pretraining task-agnostic representations that can be rapidly adapted to new tasks. However, existing BFMs assume fixed environment dynamics, limiting their robustness under real-world shifts such as changes in friction, actuation, or sensor noise. We address this by formulating BFM task-inference as a robust minimax optimization problem, enabling adaptation to worst-case dynamics perturbations without modifying pretraining. To the best of our knowledge, this is the first BFM-based framework that achieves robustness to dynamics shifts while relying solely on offline data from a single nominal environment. Our approach significantly outperforms standard BFM and robust offline IL baselines under dynamics shifts. These results demonstrate that robust policy can be achieved entirely at task-inference time, improving the practicality of BFMs in dynamic settings.

The rapid development of large language model (LLM) evaluation methodologies and datasets has led to a profound challenge: integrating state-of-the-art evaluation techniques cost-effectively while ensuring reliability, reproducibility, and efficiency. Currently, there is a notable absence of a unified and adaptable framework that seamlessly integrates various evaluation approaches. Moreover, the reliability of evaluation findings is often questionable due to potential data contamination, with the evaluation efficiency commonly overlooked when facing the substantial costs associated with LLM inference. In response to these challenges, we introduce FreeEval, a modular and scalable framework crafted to enable trustworthy and efficient automatic evaluations of LLMs. Firstly, FreeEval's unified abstractions simplify the integration and improve the transparency of diverse evaluation methodologies, encompassing dynamic evaluation that demand sophisticated LLM interactions. Secondly, the framework integrates meta-evaluation techniques like human evaluation and data contamination detection, which, along with dynamic evaluation modules in the platform, enhance the fairness of the evaluation outcomes. Lastly, FreeEval is designed with a high-performance infrastructure, including distributed computation and caching strategies, enabling extensive evaluations across multi-node, multi-GPU clusters for open-source and proprietary LLMs.

As mathematical computing becomes more democratized in high-level languages, high-performance symbolic-numeric systems are necessary for domain scientists and engineers to get the best performance out of their machine without deep knowledge of code optimization. Naturally, users need different term types either to have different algebraic properties for them, or to use efficient data structures. To this end, we developed Symbolics.jl, an extendable symbolic system which uses dynamic multiple dispatch to change behavior depending on the domain needs. In this work we detail an underlying abstract term interface which allows for speed without sacrificing generality. We show that by formalizing a generic API on actions independent of implementation, we can retroactively add optimized data structures to our system without changing the pre-existing term rewriters. We showcase how this can be used to optimize term construction and give a 113x acceleration on general symbolic transformations. Further, we show that such a generic API allows for complementary term-rewriting implementations. We demonstrate the ability to swap between classical term-rewriting simplifiers and e-graph-based term-rewriting simplifiers. We showcase an e-graph ruleset which minimizes the number of CPU cycles during expression evaluation, and demonstrate how it simplifies a real-world reaction-network simulation to halve the runtime. Additionally, we show a reaction-diffusion partial differential equation solver which is able to be automatically converted into symbolic expressions via multiple dispatch tracing, which is subsequently accelerated and parallelized to give a 157x simulation speedup. Together, this presents Symbolics.jl as a next-generation symbolic-numeric computing environment geared towards modeling and simulation.

Discrete diffusion or flow models could enable faster and more controllable sequence generation than autoregressive models. We show that na\"ive linear flow matching on the simplex is insufficient toward this goal since it suffers from discontinuities in the training target and further pathologies. To overcome this, we develop Dirichlet flow matching on the simplex based on mixtures of Dirichlet distributions as probability paths. In this framework, we derive a connection between the mixtures' scores and the flow's vector field that allows for classifier and classifier-free guidance. Further, we provide distilled Dirichlet flow matching, which enables one-step sequence generation with minimal performance hits, resulting in O(L) speedups compared to autoregressive models. On complex DNA sequence generation tasks, we demonstrate superior performance compared to all baselines in distributional metrics and in achieving desired design targets for generated sequences. Finally, we show that our classifier-free guidance approach improves unconditional generation and is effective for generating DNA that satisfies design targets. Code is available at https://github.com/HannesStark/dirichlet-flow-matching.