new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Aug 4

GroupMemBench: Benchmarking LLM Agent Memory in Multi-Party Conversations

Large Language Model (LLM) agents increasingly serve as personal assistants and workplace collaborators, where their utility depends on memory systems that extract, retrieve, and apply information across long-running conversations. However, both existing memory systems and benchmarks are built around the dyadic, single-user setup, even though real deployments routinely span groups and channels with multiple users interacting with the agent and with each other. This mismatch leaves three properties of group memory unmeasured: (i) group dynamics that go beyond concatenated one-on-one chats, (ii) speaker-grounded belief tracking, where the per-user memory modeling is needed, and (iii) audience-adapted language, where Theory-of-Mind shifts produce role-specific vocabulary. We introduce GroupMemBench, a benchmark that exposes all three. A graph-grounded synthesis pipeline produces multi-party conversations with controllable reply structure and conditions each message on per-user personas and target audiences. An adversarial query pipeline then binds every question to a specific asker across six categories, spanning multi-hop reasoning, knowledge update, term ambiguity, user-implicit reasoning, temporal reasoning, and abstention, and iteratively searches challenging, realistic queries that reflect comprehensive memory capability. Benchmarking leading memory systems exposes a sharp collapse: the strongest one reaches only 46.0% average accuracy, with knowledge update at 27.1% and term ambiguity at 37.7%, while a simple BM25 baseline matches or exceeds most agent memory systems. This indicates current memory ingestion erases the structural and lexical features group memory depends on, leaving multi-user memory far from solved.

  • 6 authors
·
May 15

TellWhisper: Tell Whisper Who Speaks When

Multi-speaker automatic speech recognition (MASR) aims to predict ''who spoke when and what'' from multi-speaker speech, a key technology for multi-party dialogue understanding. However, most existing approaches decouple temporal modeling and speaker modeling when addressing ''when'' and ''who'': some inject speaker cues before encoding (e.g., speaker masking), which can cause irreversible information loss; others fuse identity by mixing speaker posteriors after encoding, which may entangle acoustic content with speaker identity. This separation is brittle under rapid turn-taking and overlapping speech, often leading to degraded performance. To address these limitations, we propose TellWhisper, a unified framework that jointly models speaker identity and temporal within the speech encoder. Specifically, we design TS-RoPE, a time-speaker rotary positional encoding: time coordinates are derived from frame indices, while speaker coordinates are derived from speaker activity and pause cues. By applying region-specific rotation angles, the model explicitly captures per-speaker continuity, speaker-turn transitions, and state dynamics, enabling the attention mechanism to simultaneously attend to ''when'' and ''who''. Moreover, to estimate frame-level speaker activity, we develop Hyper-SD, which casts speaker classification in hyperbolic space to enhance inter-class separation and refine speaker-activity estimates. Extensive experiments demonstrate the effectiveness of the proposed approach.

  • 5 authors
·
Jan 7

Variational Hierarchical Dialog Autoencoder for Dialog State Tracking Data Augmentation

Recent works have shown that generative data augmentation, where synthetic samples generated from deep generative models complement the training dataset, benefit NLP tasks. In this work, we extend this approach to the task of dialog state tracking for goal-oriented dialogs. Due to the inherent hierarchical structure of goal-oriented dialogs over utterances and related annotations, the deep generative model must be capable of capturing the coherence among different hierarchies and types of dialog features. We propose the Variational Hierarchical Dialog Autoencoder (VHDA) for modeling the complete aspects of goal-oriented dialogs, including linguistic features and underlying structured annotations, namely speaker information, dialog acts, and goals. The proposed architecture is designed to model each aspect of goal-oriented dialogs using inter-connected latent variables and learns to generate coherent goal-oriented dialogs from the latent spaces. To overcome training issues that arise from training complex variational models, we propose appropriate training strategies. Experiments on various dialog datasets show that our model improves the downstream dialog trackers' robustness via generative data augmentation. We also discover additional benefits of our unified approach to modeling goal-oriented dialogs: dialog response generation and user simulation, where our model outperforms previous strong baselines.

  • 6 authors
·
Jan 23, 2020

USEF-TSE: Universal Speaker Embedding Free Target Speaker Extraction

Target speaker extraction aims to separate the voice of a specific speaker from mixed speech. Traditionally, this process has relied on extracting a speaker embedding from a reference speech, in which a speaker recognition model is required. However, identifying an appropriate speaker recognition model can be challenging, and using the target speaker embedding as reference information may not be optimal for target speaker extraction tasks. This paper introduces a Universal Speaker Embedding-Free Target Speaker Extraction (USEF-TSE) framework that operates without relying on speaker embeddings. USEF-TSE utilizes a multi-head cross-attention mechanism as a frame-level target speaker feature extractor. This innovative approach allows mainstream speaker extraction solutions to bypass the dependency on speaker recognition models and better leverage the information available in the enrollment speech, including speaker characteristics and contextual details. Additionally, USEF-TSE can seamlessly integrate with other time-domain or time-frequency domain speech separation models to achieve effective speaker extraction. Experimental results show that our proposed method achieves state-of-the-art (SOTA) performance in terms of Scale-Invariant Signal-to-Distortion Ratio (SI-SDR) on the WSJ0-2mix, WHAM!, and WHAMR! datasets, which are standard benchmarks for monaural anechoic, noisy and noisy-reverberant two-speaker speech separation and speaker extraction. The results on the LibriMix and the blind test set of the ICASSP 2023 DNS Challenge demonstrate that the model performs well on more diverse and out-of-domain data. For access to the source code, please visit: https://github.com/ZBang/USEF-TSE.

  • 2 authors
·
May 19, 2025

SpeakerLM: End-to-End Versatile Speaker Diarization and Recognition with Multimodal Large Language Models

The Speaker Diarization and Recognition (SDR) task aims to predict "who spoke when and what" within an audio clip, which is a crucial task in various real-world multi-speaker scenarios such as meeting transcription and dialogue systems. Existing SDR systems typically adopt a cascaded framework, combining multiple modules such as speaker diarization (SD) and automatic speech recognition (ASR). The cascaded systems suffer from several limitations, such as error propagation, difficulty in handling overlapping speech, and lack of joint optimization for exploring the synergy between SD and ASR tasks. To address these limitations, we introduce SpeakerLM, a unified multimodal large language model for SDR that jointly performs SD and ASR in an end-to-end manner. Moreover, to facilitate diverse real-world scenarios, we incorporate a flexible speaker registration mechanism into SpeakerLM, enabling SDR under different speaker registration settings. SpeakerLM is progressively developed with a multi-stage training strategy on large-scale real data. Extensive experiments show that SpeakerLM demonstrates strong data scaling capability and generalizability, outperforming state-of-the-art cascaded baselines on both in-domain and out-of-domain public SDR benchmarks. Furthermore, experimental results show that the proposed speaker registration mechanism effectively ensures robust SDR performance of SpeakerLM across diverse speaker registration conditions and varying numbers of registered speakers.

  • 9 authors
·
Aug 8, 2025

MixFormer: End-to-End Tracking with Iterative Mixed Attention

Tracking often uses a multi-stage pipeline of feature extraction, target information integration, and bounding box estimation. To simplify this pipeline and unify the process of feature extraction and target information integration, we present a compact tracking framework, termed as MixFormer, built upon transformers. Our core design is to utilize the flexibility of attention operations, and propose a Mixed Attention Module (MAM) for simultaneous feature extraction and target information integration. This synchronous modeling scheme allows to extract target-specific discriminative features and perform extensive communication between target and search area. Based on MAM, we build our MixFormer tracking framework simply by stacking multiple MAMs with progressive patch embedding and placing a localization head on top. In addition, to handle multiple target templates during online tracking, we devise an asymmetric attention scheme in MAM to reduce computational cost, and propose an effective score prediction module to select high-quality templates. Our MixFormer sets a new state-of-the-art performance on five tracking benchmarks, including LaSOT, TrackingNet, VOT2020, GOT-10k, and UAV123. In particular, our MixFormer-L achieves NP score of 79.9% on LaSOT, 88.9% on TrackingNet and EAO of 0.555 on VOT2020. We also perform in-depth ablation studies to demonstrate the effectiveness of simultaneous feature extraction and information integration. Code and trained models are publicly available at https://github.com/MCG-NJU/MixFormer.

  • 4 authors
·
Mar 21, 2022

Adapting General Disentanglement-Based Speaker Anonymization for Enhanced Emotion Preservation

A general disentanglement-based speaker anonymization system typically separates speech into content, speaker, and prosody features using individual encoders. This paper explores how to adapt such a system when a new speech attribute, for example, emotion, needs to be preserved to a greater extent. While existing systems are good at anonymizing speaker embeddings, they are not designed to preserve emotion. Two strategies for this are examined. First, we show that integrating emotion embeddings from a pre-trained emotion encoder can help preserve emotional cues, even though this approach slightly compromises privacy protection. Alternatively, we propose an emotion compensation strategy as a post-processing step applied to anonymized speaker embeddings. This conceals the original speaker's identity and reintroduces the emotional traits lost during speaker embedding anonymization. Specifically, we model the emotion attribute using support vector machines to learn separate boundaries for each emotion. During inference, the original speaker embedding is processed in two ways: one, by an emotion indicator to predict emotion and select the emotion-matched SVM accurately; and two, by a speaker anonymizer to conceal speaker characteristics. The anonymized speaker embedding is then modified along the corresponding SVM boundary towards an enhanced emotional direction to save the emotional cues. The proposed strategies are also expected to be useful for adapting a general disentanglement-based speaker anonymization system to preserve other target paralinguistic attributes, with potential for a range of downstream tasks.

  • 6 authors
·
Aug 12, 2024 1

Anonymizing Speech: Evaluating and Designing Speaker Anonymization Techniques

The growing use of voice user interfaces has led to a surge in the collection and storage of speech data. While data collection allows for the development of efficient tools powering most speech services, it also poses serious privacy issues for users as centralized storage makes private personal speech data vulnerable to cyber threats. With the increasing use of voice-based digital assistants like Amazon's Alexa, Google's Home, and Apple's Siri, and with the increasing ease with which personal speech data can be collected, the risk of malicious use of voice-cloning and speaker/gender/pathological/etc. recognition has increased. This thesis proposes solutions for anonymizing speech and evaluating the degree of the anonymization. In this work, anonymization refers to making personal speech data unlinkable to an identity while maintaining the usefulness (utility) of the speech signal (e.g., access to linguistic content). We start by identifying several challenges that evaluation protocols need to consider to evaluate the degree of privacy protection properly. We clarify how anonymization systems must be configured for evaluation purposes and highlight that many practical deployment configurations do not permit privacy evaluation. Furthermore, we study and examine the most common voice conversion-based anonymization system and identify its weak points before suggesting new methods to overcome some limitations. We isolate all components of the anonymization system to evaluate the degree of speaker PPI associated with each of them. Then, we propose several transformation methods for each component to reduce as much as possible speaker PPI while maintaining utility. We promote anonymization algorithms based on quantization-based transformation as an alternative to the most-used and well-known noise-based approach. Finally, we endeavor a new attack method to invert anonymization.

  • 1 authors
·
Aug 5, 2023

EgoAdapt: Enhancing Robustness in Egocentric Interactive Speaker Detection Under Missing Modalities

TTM (Talking to Me) task is a pivotal component in understanding human social interactions, aiming to determine who is engaged in conversation with the camera-wearer. Traditional models often face challenges in real-world scenarios due to missing visual data, neglecting the role of head orientation, and background noise. This study addresses these limitations by introducing EgoAdapt, an adaptive framework designed for robust egocentric "Talking to Me" speaker detection under missing modalities. Specifically, EgoAdapt incorporates three key modules: (1) a Visual Speaker Target Recognition (VSTR) module that captures head orientation as a non-verbal cue and lip movement as a verbal cue, allowing a comprehensive interpretation of both verbal and non-verbal signals to address TTM, setting it apart from tasks focused solely on detecting speaking status; (2) a Parallel Shared-weight Audio (PSA) encoder for enhanced audio feature extraction in noisy environments; and (3) a Visual Modality Missing Awareness (VMMA) module that estimates the presence or absence of each modality at each frame to adjust the system response dynamically.Comprehensive evaluations on the TTM benchmark of the Ego4D dataset demonstrate that EgoAdapt achieves a mean Average Precision (mAP) of 67.39% and an Accuracy (Acc) of 62.01%, significantly outperforming the state-of-the-art method by 4.96% in Accuracy and 1.56% in mAP.

  • 4 authors
·
Mar 17

PersonaGesture: Single-Reference Co-Speech Gesture Personalization for Unseen Speakers

We propose PersonaGesture, a diffusion-based pipeline for single-reference co-speech gesture personalization of unseen speakers. Given target speech and one motion clip from a new speaker, the model must synthesize gestures that follow the new utterance while retaining speaker-specific pose choices, without per-speaker optimization. This setting is useful for avatars and virtual agents, but it is hard because the reference mixes stable speaker habits with utterance-specific trajectories. PersonaGesture consists of two key components, Adaptive Style Infusion (ASI) and Implicit Distribution Rectification (IDR), to separate temporal identity evidence from residual statistic correction. A Style Perceiver first encodes the variable-length reference into compact speaker-memory tokens. ASI injects these tokens into denoising through zero-initialized residual cross-attention, enabling style evidence to affect motion formation without replacing the pretrained speech-to-motion prior. Building on this, IDR applies a length-aware diagonal affine map in latent space to correct residual channel-wise moments estimated from the same reference. Across BEAT2 and ZeroEGGS, we evaluate quantitative metrics, reference-identity controls, same-audio diagnostics, qualitative comparisons, and human preference. Experiments show that separating denoising-time speaker memory from conservative post-generation moment correction improves unseen-speaker personalization over collapsed style codes, full-reference attention, and one-clip finetuning. Project: https://xiangyue-zhang.github.io/PersonaGesture.

  • 9 authors
·
May 6

Selective Attention System (SAS): Device-Addressed Speech Detection for Real-Time On-Device Voice AI

We study device-addressed speech detection under pre-ASR edge deployment constraints, where systems must decide whether to forward audio before transcription under strict latency and compute limits. We show that, in multi-speaker environments with temporally ambiguous utterances, this task is more effectively modelled as a sequential routing problem over interaction history than as an utterance-local classification task. We formalize this as Sequential Device-Addressed Routing (SDAR) and present the Selective Attention System (SAS), an on-device implementation that instantiates this formulation. On a held-out 60-hour multi-speaker English test set, the primary audio-only configuration achieves F1=0.86 (precision=0.89, recall=0.83); with an optional camera, audio+video fusion raises F1 to 0.95 (precision=0.97, recall=0.93). Removing causal interaction history (Stage~3) reduced F1 from 0.95 to 0.57+/-0.03 in the audio+video configuration under our evaluation protocol. Among the tested components, this was the largest observed ablation effect, indicating that short-horizon interaction history carries substantial decision-relevant information in the evaluated setting. SAS runs fully on-device on ARM Cortex-A class hardware (<150 ms latency, <20 MB footprint). All results are from internal evaluation on a proprietary dataset evaluated primarily in English; a 5-hour evaluation subset may be shared for independent verification (Section 8.8).

  • 4 authors
·
Apr 8

Look Once to Hear: Target Speech Hearing with Noisy Examples

In crowded settings, the human brain can focus on speech from a target speaker, given prior knowledge of how they sound. We introduce a novel intelligent hearable system that achieves this capability, enabling target speech hearing to ignore all interfering speech and noise, but the target speaker. A naive approach is to require a clean speech example to enroll the target speaker. This is however not well aligned with the hearable application domain since obtaining a clean example is challenging in real world scenarios, creating a unique user interface problem. We present the first enrollment interface where the wearer looks at the target speaker for a few seconds to capture a single, short, highly noisy, binaural example of the target speaker. This noisy example is used for enrollment and subsequent speech extraction in the presence of interfering speakers and noise. Our system achieves a signal quality improvement of 7.01 dB using less than 5 seconds of noisy enrollment audio and can process 8 ms of audio chunks in 6.24 ms on an embedded CPU. Our user studies demonstrate generalization to real-world static and mobile speakers in previously unseen indoor and outdoor multipath environments. Finally, our enrollment interface for noisy examples does not cause performance degradation compared to clean examples, while being convenient and user-friendly. Taking a step back, this paper takes an important step towards enhancing the human auditory perception with artificial intelligence. We provide code and data at: https://github.com/vb000/LookOnceToHear.

  • 5 authors
·
May 10, 2024

RealMAN: A Real-Recorded and Annotated Microphone Array Dataset for Dynamic Speech Enhancement and Localization

The training of deep learning-based multichannel speech enhancement and source localization systems relies heavily on the simulation of room impulse response and multichannel diffuse noise, due to the lack of large-scale real-recorded datasets. However, the acoustic mismatch between simulated and real-world data could degrade the model performance when applying in real-world scenarios. To bridge this simulation-to-real gap, this paper presents a new relatively large-scale Real-recorded and annotated Microphone Array speech&Noise (RealMAN) dataset. The proposed dataset is valuable in two aspects: 1) benchmarking speech enhancement and localization algorithms in real scenarios; 2) offering a substantial amount of real-world training data for potentially improving the performance of real-world applications. Specifically, a 32-channel array with high-fidelity microphones is used for recording. A loudspeaker is used for playing source speech signals. A total of 83-hour speech signals (48 hours for static speaker and 35 hours for moving speaker) are recorded in 32 different scenes, and 144 hours of background noise are recorded in 31 different scenes. Both speech and noise recording scenes cover various common indoor, outdoor, semi-outdoor and transportation environments, which enables the training of general-purpose speech enhancement and source localization networks. To obtain the task-specific annotations, the azimuth angle of the loudspeaker is annotated with an omni-direction fisheye camera by automatically detecting the loudspeaker. The direct-path signal is set as the target clean speech for speech enhancement, which is obtained by filtering the source speech signal with an estimated direct-path propagation filter.

  • 10 authors
·
Jun 28, 2024

LoCoNet: Long-Short Context Network for Active Speaker Detection

Active Speaker Detection (ASD) aims to identify who is speaking in each frame of a video. ASD reasons from audio and visual information from two contexts: long-term intra-speaker context and short-term inter-speaker context. Long-term intra-speaker context models the temporal dependencies of the same speaker, while short-term inter-speaker context models the interactions of speakers in the same scene. These two contexts are complementary to each other and can help infer the active speaker. Motivated by these observations, we propose LoCoNet, a simple yet effective Long-Short Context Network that models the long-term intra-speaker context and short-term inter-speaker context. We use self-attention to model long-term intra-speaker context due to its effectiveness in modeling long-range dependencies, and convolutional blocks that capture local patterns to model short-term inter-speaker context. Extensive experiments show that LoCoNet achieves state-of-the-art performance on multiple datasets, achieving an mAP of 95.2%(+1.1%) on AVA-ActiveSpeaker, 68.1%(+22%) on Columbia dataset, 97.2%(+2.8%) on Talkies dataset and 59.7%(+8.0%) on Ego4D dataset. Moreover, in challenging cases where multiple speakers are present, or face of active speaker is much smaller than other faces in the same scene, LoCoNet outperforms previous state-of-the-art methods by 3.4% on the AVA-ActiveSpeaker dataset. The code will be released at https://github.com/SJTUwxz/LoCoNet_ASD.

  • 4 authors
·
Jan 19, 2023

Reference-Driven Multi-Speaker Audio Scene Generation from In-the-Wild Priors

Existing multi-speaker dialogue systems bind speakers to utterances through structured supervision: per-turn tags, multi-stream transcriptions, or learnable speaker embeddings. These systems operate within speech-only pipelines that produce clean vocal sequences without the ambient texture of real conversations. We take a different approach. Our method, ScenA, conditions a text-to-audio flow-matching foundation model, pretrained on large-scale in-the-wild data, directly on multiple reference voices and a free-form natural language prompt that describes an entire multi-speaker audio scene. Leveraging such a foundational model allows us to inherit its capacity for natural, non-studio audio: background noise, room acoustics, overlapping dialogue, and spontaneous paralinguistic events, while adding multi-speaker control without any per-turn structure. Concretely, reference latents are concatenated into the model's token sequence and distinguished by lightweight identity-aware positional encodings. However, we identify a critical obstacle to this approach: the Reference Shortcut. During training under standard noise schedules, the model can identify the matching reference by acoustic similarity to the noisy target, bypassing the text prompt entirely. We address this with a high-noise-biased timestep distribution that forces the model to rely on the text prompt for speaker assignment. We evaluate ScenA on the CoVoMix2-Dialogue benchmark, showing that it outperforms existing multi-speaker systems on speaker-binding metrics while generating rich conversational audio with overlapping speech, emotional vocalizations, and ambient sound. Our results demonstrate the advantage of using a general-purpose audio model conditioned on a free-form scene description, rather than passing structured dialog scripts through a speech-only pipeline.

  • 10 authors
·
Jun 16

Towards robust audio spoofing detection: a detailed comparison of traditional and learned features

Automatic speaker verification, like every other biometric system, is vulnerable to spoofing attacks. Using only a few minutes of recorded voice of a genuine client of a speaker verification system, attackers can develop a variety of spoofing attacks that might trick such systems. Detecting these attacks using the audio cues present in the recordings is an important challenge. Most existing spoofing detection systems depend on knowing the used spoofing technique. With this research, we aim at overcoming this limitation, by examining robust audio features, both traditional and those learned through an autoencoder, that are generalizable over different types of replay spoofing. Furthermore, we provide a detailed account of all the steps necessary in setting up state-of-the-art audio feature detection, pre-, and postprocessing, such that the (non-audio expert) machine learning researcher can implement such systems. Finally, we evaluate the performance of our robust replay speaker detection system with a wide variety and different combinations of both extracted and machine learned audio features on the `out in the wild' ASVspoof 2017 dataset. This dataset contains a variety of new spoofing configurations. Since our focus is on examining which features will ensure robustness, we base our system on a traditional Gaussian Mixture Model-Universal Background Model. We then systematically investigate the relative contribution of each feature set. The fused models, based on both the known audio features and the machine learned features respectively, have a comparable performance with an Equal Error Rate (EER) of 12. The final best performing model, which obtains an EER of 10.8, is a hybrid model that contains both known and machine learned features, thus revealing the importance of incorporating both types of features when developing a robust spoofing prediction model.

  • 5 authors
·
May 28, 2019

S-vectors and TESA: Speaker Embeddings and a Speaker Authenticator Based on Transformer Encoder

One of the most popular speaker embeddings is x-vectors, which are obtained from an architecture that gradually builds a larger temporal context with layers. In this paper, we propose to derive speaker embeddings from Transformer's encoder trained for speaker classification. Self-attention, on which Transformer's encoder is built, attends to all the features over the entire utterance and might be more suitable in capturing the speaker characteristics in an utterance. We refer to the speaker embeddings obtained from the proposed speaker classification model as s-vectors to emphasize that they are obtained from an architecture that heavily relies on self-attention. Through experiments, we demonstrate that s-vectors perform better than x-vectors. In addition to the s-vectors, we also propose a new architecture based on Transformer's encoder for speaker verification as a replacement for speaker verification based on conventional probabilistic linear discriminant analysis (PLDA). This architecture is inspired by the next sentence prediction task of bidirectional encoder representations from Transformers (BERT), and we feed the s-vectors of two utterances to verify whether they belong to the same speaker. We name this architecture the Transformer encoder speaker authenticator (TESA). Our experiments show that the performance of s-vectors with TESA is better than s-vectors with conventional PLDA-based speaker verification.

  • 3 authors
·
Dec 11, 2021

Count What You Want: Exemplar Identification and Few-shot Counting of Human Actions in the Wild

This paper addresses the task of counting human actions of interest using sensor data from wearable devices. We propose a novel exemplar-based framework, allowing users to provide exemplars of the actions they want to count by vocalizing predefined sounds ''one'', ''two'', and ''three''. Our method first localizes temporal positions of these utterances from the audio sequence. These positions serve as the basis for identifying exemplars representing the action class of interest. A similarity map is then computed between the exemplars and the entire sensor data sequence, which is further fed into a density estimation module to generate a sequence of estimated density values. Summing these density values provides the final count. To develop and evaluate our approach, we introduce a diverse and realistic dataset consisting of real-world data from 37 subjects and 50 action categories, encompassing both sensor and audio data. The experiments on this dataset demonstrate the viability of the proposed method in counting instances of actions from new classes and subjects that were not part of the training data. On average, the discrepancy between the predicted count and the ground truth value is 7.47, significantly lower than the errors of the frequency-based and transformer-based methods. Our project, code and dataset can be found at https://github.com/cvlab-stonybrook/ExRAC.

  • 5 authors
·
Dec 28, 2023

Transfer Learning from Speaker Verification to Multispeaker Text-To-Speech Synthesis

We describe a neural network-based system for text-to-speech (TTS) synthesis that is able to generate speech audio in the voice of many different speakers, including those unseen during training. Our system consists of three independently trained components: (1) a speaker encoder network, trained on a speaker verification task using an independent dataset of noisy speech from thousands of speakers without transcripts, to generate a fixed-dimensional embedding vector from seconds of reference speech from a target speaker; (2) a sequence-to-sequence synthesis network based on Tacotron 2, which generates a mel spectrogram from text, conditioned on the speaker embedding; (3) an auto-regressive WaveNet-based vocoder that converts the mel spectrogram into a sequence of time domain waveform samples. We demonstrate that the proposed model is able to transfer the knowledge of speaker variability learned by the discriminatively-trained speaker encoder to the new task, and is able to synthesize natural speech from speakers that were not seen during training. We quantify the importance of training the speaker encoder on a large and diverse speaker set in order to obtain the best generalization performance. Finally, we show that randomly sampled speaker embeddings can be used to synthesize speech in the voice of novel speakers dissimilar from those used in training, indicating that the model has learned a high quality speaker representation.

  • 11 authors
·
Jun 12, 2018

ID-LoRA: Identity-Driven Audio-Video Personalization with In-Context LoRA

Existing video personalization methods preserve visual likeness but treat video and audio separately. Without access to the visual scene, audio models cannot synchronize sounds with on-screen actions; and because classical voice-cloning models condition only on a reference recording, a text prompt cannot redirect speaking style or acoustic environment. We propose ID-LoRA (Identity-Driven In-Context LoRA), which jointly generates a subject's appearance and voice in a single model, letting a text prompt, a reference image, and a short audio clip govern both modalities together. ID-LoRA adapts the LTX-2 joint audio-video diffusion backbone via parameter-efficient In-Context LoRA and, to our knowledge, is the first method to personalize visual appearance and voice in a single generative pass. Two challenges arise. Reference and generation tokens share the same positional-encoding space, making them hard to distinguish; we address this with negative temporal positions, placing reference tokens in a disjoint RoPE region while preserving their internal temporal structure. Speaker characteristics also tend to be diluted during denoising; we introduce identity guidance, a classifier-free guidance variant that amplifies speaker-specific features by contrasting predictions with and without the reference signal. In human preference studies, ID-LoRA is preferred over Kling 2.6 Pro by 73% of annotators for voice similarity and 65% for speaking style. On cross-environment settings, speaker similarity improves by 24% over Kling, with the gap widening as conditions diverge. A preliminary user study further suggests that joint generation provides a useful inductive bias for physically grounded sound synthesis. ID-LoRA achieves these results with only ~3K training pairs on a single GPU. Code, models, and data will be released.