Daily Papers

Multi-LLM systems harness the complementary strengths of diverse Large Language Models, achieving performance and efficiency gains unattainable by a single model. In existing designs, LLMs communicate through text, forcing internal representations to be transformed into output token sequences. This process both loses rich semantic information and incurs token-by-token generation latency. Motivated by these limitations, we ask: Can LLMs communicate beyond text? Oracle experiments show that enriching the KV-Cache semantics can improve response quality without increasing cache size, supporting KV-Cache as an effective medium for inter-model communication. Thus, we propose Cache-to-Cache (C2C), a new paradigm for direct semantic communication between LLMs. C2C uses a neural network to project and fuse the source model's KV-cache with that of the target model to enable direct semantic transfer. A learnable gating mechanism selects the target layers that benefit from cache communication. Compared with text communication, C2C utilizes the deep, specialized semantics from both models, while avoiding explicit intermediate text generation. Experiments show that C2C achieves 8.5-10.5% higher average accuracy than individual models. It further outperforms the text communication paradigm by approximately 3.0-5.0%, while delivering an average 2.0x speedup in latency. Our code is available at https://github.com/thu-nics/C2C.

Long-context inference enhances the reasoning capability of Large Language Models (LLMs), but incurs significant computational overhead. Token-oriented methods, such as pruning and skipping, have shown great promise in reducing inference latency, yet still suffer from inherently insufficient structure optimization, outdated selection criteria, and redundancy interference, resulting in suboptimal speed-accuracy trade-off. To address these issues, we propose a novel training-free framework dubbed Self-Predictive Token Skipping (SPTS), for efficient long-context LLM inference. Specifically, motivated by probing the influence of target layers prior to skipping, we design two selective token skipping strategies for typical structures, including Partial Attention Probing (PAP) for multi-head attention and Low-rank Transformation Probing (LTP) for feed forward network. The former selects informative tokens via partial forward attention computation, while the latter constructs a low-rank proxy network to predict token transformations. In addition, a Multi-Stage Delayed Pruning (MSDP) strategy reallocates skipping budgets and progressively removes redundant tokens across layers. Extensive experiments display the effectiveness of our method, achieving up to 2.46times and 2.29times speedups for prefilling and end-to-end generation, respectively, while maintaining state-of-the-art accuracy. We will release the source code upon acceptance.

Recent advances in diffusion models have greatly improved image generation and editing, yet generating or reconstructing layered PSD files with transparent alpha channels remains highly challenging. We propose OmniPSD, a unified diffusion framework built upon the Flux ecosystem that enables both text-to-PSD generation and image-to-PSD decomposition through in-context learning. For text-to-PSD generation, OmniPSD arranges multiple target layers spatially into a single canvas and learns their compositional relationships through spatial attention, producing semantically coherent and hierarchically structured layers. For image-to-PSD decomposition, it performs iterative in-context editing, progressively extracting and erasing textual and foreground components to reconstruct editable PSD layers from a single flattened image. An RGBA-VAE is employed as an auxiliary representation module to preserve transparency without affecting structure learning. Extensive experiments on our new RGBA-layered dataset demonstrate that OmniPSD achieves high-fidelity generation, structural consistency, and transparency awareness, offering a new paradigm for layered design generation and decomposition with diffusion transformers.

Diffusion models have shown impressive results in generating high-quality conditional samples using guidance techniques such as Classifier-Free Guidance (CFG). However, existing methods often require additional training or neural function evaluations (NFEs), making them incompatible with guidance-distilled models. Also, they rely on heuristic approaches that need identifying target layers. In this work, we propose a novel and efficient method, termed PLADIS, which boosts pre-trained models (U-Net/Transformer) by leveraging sparse attention. Specifically, we extrapolate query-key correlations using softmax and its sparse counterpart in the cross-attention layer during inference, without requiring extra training or NFEs. By leveraging the noise robustness of sparse attention, our PLADIS unleashes the latent potential of text-to-image diffusion models, enabling them to excel in areas where they once struggled with newfound effectiveness. It integrates seamlessly with guidance techniques, including guidance-distilled models. Extensive experiments show notable improvements in text alignment and human preference, offering a highly efficient and universally applicable solution.

Block diffusion speculative decoding accelerates LLM inference by predicting all tokens within a block simultaneously for the target model to verify in parallel. Predicting an entire block at once requires a sufficiently capable draft model and effective utilization of the target model's internal knowledge. However, the state-of-the-art method DFlash constrains all draft layers to share a single fused representation derived from only a few target layers, limiting per-layer expressiveness and hindering further scaling of draft capacity. In this paper, we present \modelname, which flares out the narrow conditioning bottleneck of DFlash through a lightweight layer-wise fusion mechanism: each draft layer attends to its own learnable combination of a broad set of target layers at negligible overhead, simultaneously injecting richer target knowledge and providing every draft layer with a distinct input. This enhanced per-layer expressiveness enables scaling the draft model to deeper architectures with consistent gains. We further scale training data from 800K to 2.4M samples to fully exploit the enlarged capacity. On six benchmarks spanning mathematical reasoning, code generation, and conversation, \modelname attains average wall-clock speedups of 5.52x on Qwen3-4B, 5.46x on Qwen3-8B, and 3.91x on GPT-OSS-20B, improving over DFlash by roughly 11\%, 8\%, and 5\% respectively. Our code is available at https://github.com/Tencent/AngelSlim.

Large Language Models (LLMs) encode behaviors such as refusal within their activation space, yet identifying these behaviors remains a significant challenge. Existing methods often rely on predefined refusal templates detectable in output tokens or require manual analysis. We introduce COSMIC (Cosine Similarity Metrics for Inversion of Concepts), an automated framework for direction selection that identifies viable steering directions and target layers using cosine similarity - entirely independent of model outputs. COSMIC achieves steering performance comparable to prior methods without requiring assumptions about a model's refusal behavior, such as the presence of specific refusal tokens. It reliably identifies refusal directions in adversarial settings and weakly aligned models, and is capable of steering such models toward safer behavior with minimal increase in false refusals, demonstrating robustness across a wide range of alignment conditions.

Fine-tuning large pre-trained foundation models, such as the 175B GPT-3, has attracted more attention for downstream tasks recently. While parameter-efficient fine-tuning methods have been proposed and proven effective without retraining all model parameters, their performance is limited by the capacity of incremental modules, especially under constrained parameter budgets. \\ To overcome this challenge, we propose CapaBoost, a simple yet effective strategy that enhances model capacity by leveraging low-rank updates through parallel weight modules in target layers. By applying static random masks to the shared weight matrix, CapaBoost constructs a diverse set of weight matrices, effectively increasing the rank of incremental weights without adding parameters. Notably, our approach can be seamlessly integrated into various existing parameter-efficient fine-tuning methods. We extensively validate the efficacy of CapaBoost through experiments on diverse downstream tasks, including natural language understanding, question answering, and image classification. Our results demonstrate significant improvements over baselines, without incurring additional computation or storage costs. Our code is available at https://github.com/LINs-lab/CapaBoost.

The 8 bits quantization has been widely applied to accelerate network inference in various deep learning applications. There are two kinds of quantization methods, training-based quantization and post-training quantization. Training-based approach suffers from a cumbersome training process, while post-training quantization may lead to unacceptable accuracy drop. In this paper, we present an efficient and simple post-training method via scale optimization, named EasyQuant (EQ),that could obtain comparable accuracy with the training-based method.Specifically, we first alternately optimize scales of weights and activations for all layers target at convolutional outputs to further obtain the high quantization precision. Then, we lower down bit width to INT7 both for weights and activations, and adopt INT16 intermediate storage and integer Winograd convolution implementation to accelerate inference.Experimental results on various computer vision tasks show that EQ outperforms the TensorRT method and can achieve near INT8 accuracy in 7 bits width post-training.

Generative models have excelled in RGB synthesis, but real-world applications require RGBA manipulation. This has led to a fragmented landscape: specialized, single-task models handle alpha but lack versatility, while unified multi-task frameworks are confined to the RGB domain. To bridge this critical gap, we propose OmniAlpha, the first unified, multi-task generative framework for sequence-to-sequence RGBA image generation and editing. Its architecture features MSRoPE-BiL, a novel RoPE method with a bi-directionally extendable layer axis for its Diffusion Transformer (DiT) backbone, enabling the concurrent processing of multiple input and target RGBA layers. To power this framework, we introduce AlphaLayers, a new dataset of 1,000 high-quality, multi-layer triplets, built via a novel automated synthesis and filter pipeline. Jointly training OmniAlpha on this dataset across a comprehensive suite of 21 diverse tasks, extensive experiments demonstrate that our unified approach consistently outperforms strong, specialized baselines. Most notably, OmniAlpha achieves a dramatic 84.8% relative reduction in SAD for mask-free matting on AIM-500 and wins over 90% of human preferences in layer-conditioned completion. Our work proves that a unified, multi-task model can learn a superior shared representation for RGBA, paving the way for more powerful, layer-aware generative systems.

Large language models (LLMs) acquire a large amount of knowledge through pre-training on vast and diverse corpora. While this endows LLMs with strong capabilities in generation and reasoning, it amplifies risks associated with sensitive, copyrighted, or harmful content in training data. LLM unlearning, which aims to remove specific knowledge encoded within models, is a promising technique to reduce these risks. However, existing LLM unlearning methods often force LLMs to generate random or incoherent answers due to their inability to alter the encoded knowledge precisely. To achieve effective unlearning at the knowledge level of LLMs, we propose Knowledge Unlearning by Deviating representAtion (KUDA). We first utilize causal tracing to locate specific layers for target knowledge storage. We then design a new unlearning objective that induces the model's representations to deviate from its original position in the phase of knowledge removal, thus disrupting the ability to associate with the target knowledge. To resolve the optimization conflicts between forgetting and retention, we employ a relaxation null-space projection mechanism to mitigate the disruption to the representation space of retaining knowledge. Extensive experiments on representative benchmarks, WMDP and MUSE, demonstrate that KUDA outperforms most existing baselines by effectively balancing knowledge removal and model utility retention.

We introduce VLM-Lens, a toolkit designed to enable systematic benchmarking, analysis, and interpretation of vision-language models (VLMs) by supporting the extraction of intermediate outputs from any layer during the forward pass of open-source VLMs. VLM-Lens provides a unified, YAML-configurable interface that abstracts away model-specific complexities and supports user-friendly operation across diverse VLMs. It currently supports 16 state-of-the-art base VLMs and their over 30 variants, and is extensible to accommodate new models without changing the core logic. The toolkit integrates easily with various interpretability and analysis methods. We demonstrate its usage with two simple analytical experiments, revealing systematic differences in the hidden representations of VLMs across layers and target concepts. VLM-Lens is released as an open-sourced project to accelerate community efforts in understanding and improving VLMs.

Conditional computation is a popular strategy to make Transformers more efficient. Existing methods often target individual modules (e.g., mixture-of-experts layers) or skip layers independently of one another. However, interpretability research has demonstrated that the middle layers of Transformers exhibit greater redundancy, and that early layers aggregate information into token positions. Guided by these insights, we propose a novel architecture that dynamically skips a variable number of layers from the middle outward. In particular, a learned gating mechanism determines whether to bypass a symmetric span of central blocks based on the input, and a gated attention mechanism prevents subsequent tokens from attending to skipped token positions. Residual norms are controlled with a 'sandwich' or 'perilayernorm' scheme and gate sparsity with an adaptive regularization loss. We had aimed to reduce compute requirements for 'simpler' tokens and potentially foster an emergent multi-level representational hierarchy but, at the scales investigated, our approach does not achieve improvements in the trade-off between validation cross-entropy and estimated FLOPs compared to dense baselines with fewer layers. We release our code at https://github.com/tim-lawson/skip-middle.

Cross-domain few-shot object detection (CD-FSOD) aims to adapt pretrained detectors from a source domain to target domains with limited annotations, suffering from severe domain shifts and data scarcity problems. In this work, we find a previously overlooked phenomenon: models exhibit dispersed and unfocused attention in target domains, leading to imprecise localization and redundant predictions, just like a human cannot focus on visual objects. Therefore, we call it the target-domain Astigmatism problem. Analysis on attention distances across transformer layers reveals that regular fine-tuning inherently shows a trend to remedy this problem, but results are still far from satisfactory, which we aim to enhance in this paper. Biologically inspired by the human fovea-style visual system, we enhance the fine-tuning's inherent trend through a center-periphery attention refinement framework, which contains (1) a Positive Pattern Refinement module to reshape attention toward semantic objects using class-specific prototypes, simulating the visual center region; (2) a Negative Context Modulation module to enhance boundary discrimination by modeling background context, simulating the visual periphery region; and (3) a Textual Semantic Alignment module to strengthen center-periphery distinction through cross-modal cues. Our bio-inspired approach transforms astigmatic attention into focused patterns, substantially improving adaptation to target domains. Experiments on six challenging CD-FSOD benchmarks consistently demonstrate improved detection accuracy and establish new state-of-the-art results.

Discovering novel drug candidate molecules is one of the most fundamental and critical steps in drug development. Generative deep learning models, which create synthetic data given a probability distribution, offer a high potential for designing de novo molecules. However, to be utilisable in real life drug development pipelines, these models should be able to design drug like and target centric molecules. In this study, we propose an end to end generative system, DrugGEN, for the de novo design of drug candidate molecules that interact with intended target proteins. The proposed method represents molecules as graphs and processes them via a generative adversarial network comprising graph transformer layers. The system is trained using a large dataset of drug like compounds and target specific bioactive molecules to design effective inhibitory molecules against the AKT1 protein, which is critically important in developing treatments for various types of cancer. We conducted molecular docking and dynamics to assess the target centric generation performance of the model, as well as attention score visualisation to examine model interpretability. In parallel, selected compounds were chemically synthesised and evaluated in the context of in vitro enzymatic assays, which identified two bioactive molecules that inhibited AKT1 at low micromolar concentrations. These results indicate that DrugGEN's de novo molecules have a high potential for interacting with the AKT1 protein at the level of its native ligands. Using the open access DrugGEN codebase, it is possible to easily train models for other druggable proteins, given a dataset of experimentally known bioactive molecules.

Everyday tasks come with a target, and pretraining models around this target is what turns them into experts. In this paper, we study target-oriented language model (LM) pretraining by introducing Neuron-Activated Graph Ranking (NAG-based Ranking), a training-free and interpretable framework for target pretraining data selection. Rather than using black-box representations, our approach directly characterizes each target input by a sparse set of high-impact neurons in any off-the-shelf LLMs. Concretely, we quantify neuron impact and select the most influential neurons across layers into a compact Neuron-Activated Graph (NAG), and rank candidate data by NAG similarity to target examples. We conduct experiments across six benchmarks, where our NAG-based Ranking improves target-oriented pretraining by 4.9% on average over random sampling, and also outperforms state-of-the-art baselines by 5.3% accuracy on HellaSwag. It also remains effective under a more applicable multi-target setting, where our best setup surpasses two baselines by 1.1% and 4.1%, respectively. Furthermore, we provide a comprehensive analysis on why and how our NAG works, e.g., deactivating NAG-selected neurons (only 0.12% of all) causes a 23.5% performance collapse, and restricting NAG to the final layer incurs a 4.1% average drop, indicating that NAG captures a sparse "functional backbone" for learning target features. We release the code at https://github.com/asillycat/NAG.

Underwater acoustic target recognition is a difficult task owing to the intricate nature of underwater acoustic signals. The complex underwater environments, unpredictable transmission channels, and dynamic motion states greatly impact the real-world underwater acoustic signals, and may even obscure the intrinsic characteristics related to targets. Consequently, the data distribution of underwater acoustic signals exhibits high intra-class diversity, thereby compromising the accuracy and robustness of recognition systems.To address these issues, this work proposes a convolution-based mixture of experts (CMoE) that recognizes underwater targets in a fine-grained manner. The proposed technique introduces multiple expert layers as independent learners, along with a routing layer that determines the assignment of experts according to the characteristics of inputs. This design allows the model to utilize independent parameter spaces, facilitating the learning of complex underwater signals with high intra-class diversity. Furthermore, this work optimizes the CMoE structure by balancing regularization and an optional residual module. To validate the efficacy of our proposed techniques, we conducted detailed experiments and visualization analyses on three underwater acoustic databases across several acoustic features. The experimental results demonstrate that our CMoE consistently achieves significant performance improvements, delivering superior recognition accuracy when compared to existing advanced methods.

Knowledge editing in Large Language Models (LLMs) aims to update the model's prediction for a specific query to a desired target while preserving its behavior on all other inputs. This process typically involves two stages: identifying the layer to edit and performing the parameter update. Intuitively, different queries may localize knowledge at different depths of the model, resulting in different sample-wise editing performance for a fixed editing layer. In this work, we hypothesize the existence of fixed golden layers that can achieve near-optimal editing performance similar to sample-wise optimal layers. To validate this hypothesis, we provide empirical evidence by comparing golden layers against ground-truth sample-wise optimal layers. Furthermore, we show that golden layers can be reliably identified using a proxy dataset and generalize effectively to unseen test set queries across datasets. Finally, we propose a novel method, namely Layer Gradient Analysis (LGA) that estimates golden layers efficiently via gradient-attribution, avoiding extensive trial-and-error across multiple editing runs. Extensive experiments on several benchmark datasets demonstrate the effectiveness and robustness of our LGA approach across different LLM types and various knowledge editing methods.

We propose LauraTSE, an Auto-Regressive Decoder-Only Language Model for Target Speaker Extraction built upon the LauraGPT backbone. LauraTSE employs a small-scale auto-regressive decoder-only language model that generates the initial layers of the target speech's discrete codec representations from the continuous embeddings of both the mixture and reference speech. These outputs serve as coarse-grained predictions. To refine them, a one-step encoder-only language model reconstructs the full codec representation by integrating information from both the mixture and the reference speech, adding fine-grained details. Experimental results show that our approach can achieve promising performance. Additionally, we conduct ablation studies to investigate the data scalability and the contribution of the encoder-only model.

Multilingual Machine Translation promises to improve translation quality between non-English languages. This is advantageous for several reasons, namely lower latency (no need to translate twice), and reduced error cascades (e.g., avoiding losing gender and formality information when translating through English). On the downside, adding more languages reduces model capacity per language, which is usually countered by increasing the overall model size, making training harder and inference slower. In this work, we introduce Language-Specific Transformer Layers (LSLs), which allow us to increase model capacity, while keeping the amount of computation and the number of parameters used in the forward pass constant. The key idea is to have some layers of the encoder be source or target language-specific, while keeping the remaining layers shared. We study the best way to place these layers using a neural architecture search inspired approach, and achieve an improvement of 1.3 chrF (1.5 spBLEU) points over not using LSLs on a separate decoder architecture, and 1.9 chrF (2.2 spBLEU) on a shared decoder one.

This paper introduces LLM-Streamline, a novel layer pruning approach for large language models. It is based on the observation that different layers have varying impacts on hidden states, enabling the identification of less important layers. LLMStreamline comprises two parts: layer pruning, which removes consecutive layers with the lowest importance based on target sparsity, and layer replacement, where a lightweight network is trained to replace the pruned layers to mitigate performance loss. Additionally, a new metric called "stability" is proposed to address the limitations of accuracy in evaluating model compression. Experiments show that LLM-Streamline surpasses previous state-of-the-art pruning methods in both accuracy and stability.

This paper attempts to analyze the effectiveness of deep learning for tabular data processing. It is believed that decision trees and their ensembles is the leading method in this domain, and deep neural networks must be content with computer vision and so on. But the deep neural network is a framework for building gradient-based hierarchical representations, and this key feature should be able to provide the best processing of generic structured (tabular) data, not just image matrices and audio spectrograms. This problem is considered through the prism of the Weather Prediction track in the Yandex Shifts challenge (in other words, the Yandex Shifts Weather task). This task is a variant of the classical tabular data regression problem. It is also connected with another important problem: generalization and uncertainty in machine learning. This paper proposes an end-to-end algorithm for solving the problem of regression with uncertainty on tabular data, which is based on the combination of four ideas: 1) deep ensemble of self-normalizing neural networks, 2) regression as parameter estimation of the Gaussian target error distribution, 3) hierarchical multitask learning, and 4) simple data preprocessing. Three modifications of the proposed algorithm form the top-3 leaderboard of the Yandex Shifts Weather challenge respectively. This paper considers that this success has occurred due to the fundamental properties of the deep learning algorithm, and tries to prove this.

We study optimal learning-rate selection in two-layer and three-layer linear neural networks trained to learn linear target functions. In particular, we derive the exact closed-form expressions for the gradients and test loss after one and two steps of gradient descent, enabling a precise characterization of early training dynamics. We characterize how learning rates should scale under the gradient approximation in the first two steps, and prove that performing updates with this approximation yields a tractable surrogate loss with a tight, small approximation error. This formulation enables the theoretical analysis of layer-wise learning rates and reveals a distinct early-training regime: test loss can be minimized by unequal learning rates at the initial step, while equal learning rates become optimal in subsequent steps. Our numerical experiments validate the theory and demonstrate the importance of balancing layer-wise learning rates early during training. The code is available at: https://github.com/TDCSZ327/Layer-Balancing.

Pre-trained Transformers often exhibit over-confidence in source patterns and difficulty in forming new target-domain patterns during fine-tuning. We formalize the mechanism of output saturation leading to gradient suppression through standard cross-entropy and softmax analysis, showing that gradient suppression at inflection layers confines adaptation to high-level recombination of existing features while preventing low-level reconstruction. We introduce a set of layer-wise diagnostic metrics -- attention entropy (saturation proxy), activation gradient norm, parameter gradient norm, and Delta-CKA under a shared PCA basis -- to identify inflection layers characterized by both low attention entropy and steep gradient decay. Building on these findings, we propose a diagnose-first, inject-light fine-tuning strategy: selectively inserting LoRA adapters at inflection layers to restore suppressed backward signals with minimal parameter overhead. Experiments on BERT-base transfer from SST-2 to Rotten Tomatoes under under-trained and over-trained source regimes reveal that over-trained initialization benefits from inflection-layer LoRA injection, while under-trained initialization suffers performance degradation. When base features are strong, unblocking inflection layers facilitates high-level compositional adaptation; when base features are weak, full-pathway unblocking is required for low-level reconstruction, as supported by joint analysis of layer-wise activation gradients and Delta-CKA dynamics.

Attention-based mechanisms are widely used in machine learning, most prominently in transformers. However, hyperparameters such as the rank of the attention matrices and the number of heads are scaled nearly the same way in all realizations of this architecture, without theoretical justification. In this work we show that there are dramatic trade-offs between the rank and number of heads of the attention mechanism. Specifically, we present a simple and natural target function that can be represented using a single full-rank attention head for any context length, but that cannot be approximated by low-rank attention unless the number of heads is exponential in the embedding dimension, even for short context lengths. Moreover, we prove that, for short context lengths, adding depth allows the target to be approximated by low-rank attention. For long contexts, we conjecture that full-rank attention is necessary. Finally, we present experiments with off-the-shelf transformers that validate our theoretical findings.

Transformer structure, stacked by a sequence of encoder and decoder network layers, achieves significant development in neural machine translation. However, vanilla Transformer mainly exploits the top-layer representation, assuming the lower layers provide trivial or redundant information and thus ignoring the bottom-layer feature that is potentially valuable. In this work, we propose the Group-Transformer model (GTrans) that flexibly divides multi-layer representations of both encoder and decoder into different groups and then fuses these group features to generate target words. To corroborate the effectiveness of the proposed method, extensive experiments and analytic experiments are conducted on three bilingual translation benchmarks and two multilingual translation tasks, including the IWLST-14, IWLST-17, LDC, WMT-14 and OPUS-100 benchmark. Experimental and analytical results demonstrate that our model outperforms its Transformer counterparts by a consistent gain. Furthermore, it can be successfully scaled up to 60 encoder layers and 36 decoder layers.

The rapid advancement of large language models (LLMs) has revolutionized natural language processing (NLP). While these models excel at understanding and generating human-like text, their widespread deployment can be prohibitively expensive. SortedNet is a recent training technique for enabling dynamic inference for deep neural networks. It leverages network modularity to create sub-models with varying computational loads, sorting them based on computation/accuracy characteristics in a nested manner. We extend SortedNet to generative NLP tasks, making large language models dynamic without any pretraining and by only replacing standard Supervised Fine-Tuning (SFT) with Sorted Fine-Tuning (SoFT) at the same costs. Our approach boosts model efficiency, eliminating the need for multiple models for various scenarios during inference. We show that using this approach, we are able to unlock the potential of intermediate layers of transformers in generating the target output. Our sub-models remain integral components of the original model, minimizing storage requirements and transition costs between different computational/latency budgets. By applying this approach on LLaMa 2 13B for tuning on the Stanford Alpaca dataset and comparing it to normal tuning and early exit via PandaLM benchmark, we show that Sorted Fine-Tuning can deliver models twice as fast as the original model while maintaining or exceeding performance.

Despite their widespread success, the application of deep neural networks to functional data remains scarce today. The infinite dimensionality of functional data means standard learning algorithms can be applied only after appropriate dimension reduction, typically achieved via basis expansions. Currently, these bases are chosen a priori without the information for the task at hand and thus may not be effective for the designated task. We instead propose to adaptively learn these bases in an end-to-end fashion. We introduce neural networks that employ a new Basis Layer whose hidden units are each basis functions themselves implemented as a micro neural network. Our architecture learns to apply parsimonious dimension reduction to functional inputs that focuses only on information relevant to the target rather than irrelevant variation in the input function. Across numerous classification/regression tasks with functional data, our method empirically outperforms other types of neural networks, and we prove that our approach is statistically consistent with low generalization error. Code is available at: https://github.com/jwyyy/AdaFNN.

Large language model (LLM) unlearning has emerged as a crucial post-hoc mechanism for privacy protection and AI safety, yet auditing whether target knowledge is truly erased remains challenging. Existing output-level metrics fail to detect when this knowledge remains recoverable from internal representations. Recent white-box studies reveal such residual knowledge but often rely on auxiliary training or dataset-specific adaptations, leaving no generalizable metric. To address these limitations, we propose the Unlearning Depth Score (UDS), a metric that quantifies the mechanistic depth of unlearning via activation patching. UDS first identifies layers that encode the target knowledge using a retain model baseline, then measures how much of it is erased in the unlearned model on a 0-1 scale. In a meta-evaluation across 20 metrics on 150 unlearned models spanning 8 methods, UDS achieves the highest faithfulness and robustness, confirming our causal approach as the most reliable for unlearning evaluation. Case studies further reveal that white-box metrics can disagree at the layer level and that erasure depth varies across examples. We provide guidelines for integrating UDS into existing benchmarking frameworks and streamlining the evaluation pipeline. Code and data are available at https://github.com/gnueaj/unlearning-depth-score

This study presents a novel approach for knowledge distillation (KD) from a BERT teacher model to an automatic speech recognition (ASR) model using intermediate layers. To distil the teacher's knowledge, we use an attention decoder that learns from BERT's token probabilities. Our method shows that language model (LM) information can be more effectively distilled into an ASR model using both the intermediate layers and the final layer. By using the intermediate layers as distillation target, we can more effectively distil LM knowledge into the lower network layers. Using our method, we achieve better recognition accuracy than with shallow fusion of an external LM, allowing us to maintain fast parallel decoding. Experiments on the LibriSpeech dataset demonstrate the effectiveness of our approach in enhancing greedy decoding with connectionist temporal classification (CTC).

Multilingual neural machine translation models generally distinguish translation directions by the language tag (LT) in front of the source or target sentences. However, current LT strategies cannot indicate the desired target language as expected on zero-shot translation, i.e., the off-target issue. Our analysis reveals that the indication of the target language is sensitive to the placement of the target LT. For example, when placing the target LT on the decoder side, the indication would rapidly degrade along with decoding steps, while placing the target LT on the encoder side would lead to copying or paraphrasing the source input. To address the above issues, we propose a simple yet effective strategy named Language Converter Strategy (LCS). By introducing the target language embedding into the top encoder layers, LCS mitigates confusion in the encoder and ensures stable language indication for the decoder. Experimental results on MultiUN, TED, and OPUS-100 datasets demonstrate that LCS could significantly mitigate the off-target issue, with language accuracy up to 95.28%, 96.21%, and 85.35% meanwhile outperforming the vanilla LT strategy by 3.07, 3,3, and 7.93 BLEU scores on zero-shot translation, respectively.

Transfer learning enables solving a specific task having limited data by using the pre-trained deep networks trained on large-scale datasets. Typically, while transferring the learned knowledge from source task to the target task, the last few layers are fine-tuned (re-trained) over the target dataset. However, these layers are originally designed for the source task that might not be suitable for the target task. In this paper, we introduce a mechanism for automatically tuning the Convolutional Neural Networks (CNN) for improved transfer learning. The pre-trained CNN layers are tuned with the knowledge from target data using Bayesian Optimization. First, we train the final layer of the base CNN model by replacing the number of neurons in the softmax layer with the number of classes involved in the target task. Next, the pre-trained CNN is tuned automatically by observing the classification performance on the validation data (greedy criteria). To evaluate the performance of the proposed method, experiments are conducted on three benchmark datasets, e.g., CalTech-101, CalTech-256, and Stanford Dogs. The classification results obtained through the proposed AutoTune method outperforms the standard baseline transfer learning methods over the three datasets by achieving 95.92%, 86.54%, and 84.67% accuracy over CalTech-101, CalTech-256, and Stanford Dogs, respectively. The experimental results obtained in this study depict that tuning of the pre-trained CNN layers with the knowledge from the target dataset confesses better transfer learning ability. The source codes are available at https://github.com/JekyllAndHyde8999/AutoTune_CNN_TransferLearning.

MLLM-based GUI grounding methods commonly formulate target localization as autoregressive coordinate generation, enabling models to leverage the strong instruction-following and semantic understanding capabilities of MLLMs. However, this formulation requires the model to retain region-level target evidence while decoding coordinate tokens with the spatial precision demanded by GUI clicking. Our diagnostic analysis reveals that target-region awareness emerges in intermediate decoder layers but is neither retained nor translated into the final coordinate prediction. Existing ZoomIn-style methods address this issue through an external crop-and-rerun pass, which improves localization but increases end-to-end latency and computational cost. To retain the accuracy benefits of two-pass zooming without this extra cost, we propose InnerZoom, a single-forward framework for cross-layer evidence bridging. InnerZoom transforms target-related cues from the original forward pass into a compact cross-layer evidence state, then preserves, refines, and reinjects this state throughout later decoding layers to guide coordinate prediction. Extensive experimental results suggest that InnerZoom-4B achieves state-of-the-art performance on all six GUI grounding benchmarks, obtaining 64.7 on OSWorld-G, 40.2 on UI-Vision, 73.1 on OSWorld-GR, and 87.6 on MMBench-GUI, surpassing the previous best results by 4.1, 3.2, 2.9, and 2.3 points, respectively. Under a controlled 4B setting, InnerZoom improves the same SFT+RL baseline by 5.3 points on average and outperforms two-pass ZoomIn by 1.3 points on average, while reducing end-to-end latency by up to 31.8% and TFLOPs by about 29%. Code and models will be publicly available.

Current state of the art methods in Domain Adaptation follow adversarial approaches, making training a challenge. Existing non-adversarial methods learn mappings between the source and target domains, to achieve reasonable performance. However, even these methods do not focus on a key aspect: maintaining performance on the source domain, even after optimizing over the target domain. Additionally, there exist very few methods in low resource supervised domain adaptation. This work proposes a method, LRS-DAG, that aims to solve these current issues in the field. By adding a set of "encoder layers" which map the target domain to the source, and can be removed when dealing directly with the source data, the model learns to perform optimally on both domains. LRS-DAG showcases its uniqueness by being a new algorithm for low resource domain adaptation which maintains performance over the source domain, with a new metric for learning mappings between domains being introduced. We show that, in the case of FCNs, when transferring from MNIST to SVHN, LRS-DAG performs comparably to fine tuning, with the advantage of maintaining performance over the source domain. LRS-DAG outperforms fine tuning when transferring to a synthetic dataset similar to MNIST, which is a setting more representative of low resource supervised domain adaptation.

This paper investigates the extent to which pretrained German BERT encodes knowledge of noun compound semantics. We comprehensively vary combinations of target tokens, layers, and cased vs. uncased models, and evaluate them by predicting the compositionality of 868 gold standard compounds. Looking at representational patterns within the transformer architecture, we observe trends comparable to equivalent prior work on English, with compositionality information most easily recoverable in the early layers. However, our strongest results clearly lag behind those reported for English, suggesting an inherently more difficult task in German. This may be due to the higher productivity of compounding in German than in English and the associated increase in constituent-level ambiguity, including in our target compound set.

Diffusion models have been widely used in the generative domain due to their convincing performance in modeling complex data distributions. Moreover, they have shown competitive results on discriminative tasks, such as image segmentation. While diffusion models have also been explored for automatic music transcription, their performance has yet to reach a competitive level. In this paper, we focus on discrete diffusion model's refinement capabilities and present a novel architecture for piano transcription. Our model utilizes Neighborhood Attention layers as the denoising module, gradually predicting the target high-resolution piano roll, conditioned on the finetuned features of a pretrained acoustic model. To further enhance refinement, we devise a novel strategy which applies distinct transition states during training and inference stage of discrete diffusion models. Experiments on the MAESTRO dataset show that our approach outperforms previous diffusion-based piano transcription models and the baseline model in terms of F1 score. Our code is available in https://github.com/hanshounsu/d3rm.

For many (minority) languages, the resources needed to train large models are not available. We investigate the performance of zero-shot transfer learning with as little data as possible, and the influence of language similarity in this process. We retrain the lexical layers of four BERT-based models using data from two low-resource target language varieties, while the Transformer layers are independently fine-tuned on a POS-tagging task in the model's source language. By combining the new lexical layers and fine-tuned Transformer layers, we achieve high task performance for both target languages. With high language similarity, 10MB of data appears sufficient to achieve substantial monolingual transfer performance. Monolingual BERT-based models generally achieve higher downstream task performance after retraining the lexical layer than multilingual BERT, even when the target language is included in the multilingual model.

Diffusion-based models have demonstrated impressive capabilities for text-to-image generation and are expected for personalized applications of subject-driven generation, which require the generation of customized concepts with one or a few reference images. However, existing methods based on fine-tuning fail to balance the trade-off between subject learning and the maintenance of the generation capabilities of pretrained models. Moreover, other methods that utilize additional image encoders tend to lose important details of the subject due to encoding compression. To address these challenges, we propose DreamTurner, a novel method that injects reference information from coarse to fine to achieve subject-driven image generation more effectively. DreamTurner introduces a subject-encoder for coarse subject identity preservation, where the compressed general subject features are introduced through an attention layer before visual-text cross-attention. We then modify the self-attention layers within pretrained text-to-image models to self-subject-attention layers to refine the details of the target subject. The generated image queries detailed features from both the reference image and itself in self-subject-attention. It is worth emphasizing that self-subject-attention is an effective, elegant, and training-free method for maintaining the detailed features of customized subjects and can serve as a plug-and-play solution during inference. Finally, with additional subject-driven fine-tuning, DreamTurner achieves remarkable performance in subject-driven image generation, which can be controlled by a text or other conditions such as pose. For further details, please visit the project page at https://dreamtuner-diffusion.github.io/.

Model merging, such as model souping, is the practice of combining different models with the same architecture together without further training. In this work, we present a model merging methodology that addresses the difficulty of fine-tuning Large Language Models (LLMs) for target tasks in non-English languages, where task-specific data is often unavailable. We focus on mathematical reasoning and without in-language math data, facilitate cross-lingual transfer by composing language and math capabilities. Starting from the same pretrained model, we fine-tune separate "experts" on math instruction data in English and on generic instruction data in the target language. We then replace the top and bottom transformer layers of the math expert directly with layers from the language expert, which consequently enhances math performance in the target language. The resulting merged models outperform the individual experts and other merging methods on the math benchmark, MGSM, by 10% across four major languages where math instruction data is scarce. In addition, this layer swapping is simple, inexpensive, and intuitive, as it is based on an interpretative analysis of the most important parameter changes during the fine-tuning of each expert. The ability to successfully re-compose LLMs for cross-lingual transfer in this manner opens up future possibilities to combine model expertise, create modular solutions, and transfer reasoning capabilities across languages all post hoc.

LLMs are multilingual by training, yet their lingua franca is often English, reflecting English language dominance in pretraining. Other languages remain in parametric memory but are systematically suppressed. We argue that language defaultness is governed by a sparse, low-rank control circuit, language neurons, that can be mechanistically isolated and safely steered. We introduce Neural FOXP2, that makes a chosen language (Hindi or Spanish) primary in a model by steering language-specific neurons. Neural FOXP2 proceeds in three stages: (i) Localize: We train per-layer SAEs so each activation decomposes into a small set of active feature components. For every feature, we quantify English vs. Hindi/Spanish selectivity overall logit-mass lift toward the target-language token set. Tracing the top-ranked features back to their strongest contributing units yields a compact language-neuron set. (ii) Steering directions: We localize controllable language-shift geometry via a spectral low-rank analysis. For each layer, we build English to target activation-difference matrices and perform layerwise SVD to extract the dominant singular directions governing language change. The eigengap and effective-rank spectra identify a compact steering subspace and an empirically chosen intervention window (where these directions are strongest and most stable). (iii) Steer: We apply a signed, sparse activation shift targeted to the language neurons. Concretely, within low to mid layers we add a positive steering along the target-language dominant directions and a compensating negative shift toward the null space for the English neurons, yielding controllable target-language defaultness.

State Space Model (SSM)-based machine learning architectures have recently gained significant attention for processing sequential data. Mamba, a recent sequence-to-sequence SSM, offers competitive accuracy with superior computational efficiency compared to state-of-the-art transformer models. While this advantage makes Mamba particularly promising for resource-constrained edge devices, no hardware acceleration frameworks are currently optimized for deploying it in such environments. This paper presents eMamba, a comprehensive end-to-end hardware acceleration framework explicitly designed for deploying Mamba models on edge platforms. eMamba maximizes computational efficiency by replacing complex normalization layers with lightweight hardware-aware alternatives and approximating expensive operations, such as SiLU activation and exponentiation, considering the target applications. Then, it performs an approximation-aware neural architecture search (NAS) to tune the learnable parameters used during approximation. Evaluations with Fashion-MNIST, CIFAR-10, and MARS, an open-source human pose estimation dataset, show eMamba achieves comparable accuracy to state-of-the-art techniques using 1.63-19.9times fewer parameters. In addition, it generalizes well to large-scale natural language tasks, demonstrating stable perplexity across varying sequence lengths on the WikiText2 dataset. We also quantize and implement the entire eMamba pipeline on an AMD ZCU102 FPGA and ASIC using GlobalFoundries (GF) 22 nm technology. Experimental results show 4.95-5.62times lower latency and 2.22-9.95times higher throughput, with 4.77times smaller area, 9.84times lower power, and 48.6times lower energy consumption than baseline solutions while maintaining competitive accuracy.

Large Language Models (LLMs) are known to process information using a proficient internal language consistently, referred to as latent language, which may differ from the input or output languages. However, how the discrepancy between the latent language and the input and output language affects downstream task performance remains largely unexplored. While many studies research the latent language of LLMs, few address its importance in influencing task performance. In our study, we hypothesize that thinking in latent language consistently enhances downstream task performance. To validate this, our work varies the input prompt languages across multiple downstream tasks and analyzes the correlation between consistency in latent language and task performance. We create datasets consisting of questions from diverse domains such as translation and geo-culture, which are influenced by the choice of latent language. Experimental results across multiple LLMs on translation and geo-culture tasks, which are sensitive to the choice of language, indicate that maintaining consistency in latent language is not always necessary for optimal downstream task performance. This is because these models adapt their internal representations near the final layers to match the target language, reducing the impact of consistency on overall performance.

Quantum generative models use the intrinsic probabilistic nature of quantum mechanics to learn and reproduce complex probability distributions. In this paper, we present an implementation of a 3-qubit quantum circuit Born machine trained to model a 3-bit Gaussian distribution using a Kullback-Leibler (KL) divergence loss and parameter-shift gradient optimization. The variational quantum circuit consists of layers of parameterized rotations and entangling gates, and is optimized such that the Born rule output distribution closely matches the target distribution. We detail the mathematical formulation of the model distribution, the KL divergence cost function, and the parameter-shift rule for gradient evaluation. Training results on a statevector simulator show that the KL divergence is minimized to near zero, and the final generated distribution aligns quantitatively with the target probabilities. We analyze the convergence behavior and discuss the implications for scalability and quantum advantage. Our results demonstrate the feasibility of small-scale quantum generative learning and provide insight into the training dynamics of quantum circuit models.

While transformers have greatly boosted performance in semantic segmentation, domain adaptive transformers are not yet well explored. We identify that the domain gap can cause discrepancies in self-attention. Due to this gap, the transformer attends to spurious regions or pixels, which deteriorates accuracy on the target domain. We propose to perform adaptation on attention maps with cross-domain attention layers that share features between the source and the target domains. Specifically, we impose consistency between predictions from cross-domain attention and self-attention modules to encourage similar distribution in the attention and output of the model across domains, i.e., attention-level and output-level alignment. We also enforce consistency in attention maps between different augmented views to further strengthen the attention-based alignment. Combining these two components, our method mitigates the discrepancy in attention maps across domains and further boosts the performance of the transformer under unsupervised domain adaptation settings. Our model outperforms the existing state-of-the-art baseline model on three widely used benchmarks, including GTAV-to-Cityscapes by 1.3 percent point (pp), Synthia-to-Cityscapes by 0.6 pp, and Cityscapes-to-ACDC by 1.1 pp, on average. Additionally, we verify the effectiveness and generalizability of our method through extensive experiments. Our code will be publicly available.

Despite growing interest in object detection, very few works address the extremely practical problem of cross-domain robustness especially for automative applications. In order to prevent drops in performance due to domain shift, we introduce an unsupervised domain adaptation method built on the foundation of faster-RCNN with two domain adaptation components addressing the shift at the instance and image levels respectively and apply a consistency regularization between them. We also introduce a family of adaptation layers that leverage the squeeze excitation mechanism called SE Adaptors to improve domain attention and thus improves performance without any prior requirement of knowledge of the new target domain. Finally, we incorporate a center loss in the instance and image level representations to improve the intra-class variance. We report all results with Cityscapes as our source domain and Foggy Cityscapes as the target domain outperforming previous baselines.

Part-of-Speech (POS) tagging is an important component of the NLP pipeline, but many low-resource languages lack labeled data for training. An established method for training a POS tagger in such a scenario is to create a labeled training set by transferring from high-resource languages. In this paper, we propose a novel method for transferring labels from multiple high-resource source to low-resource target languages. We formalize POS tag projection as graph-based label propagation. Given translations of a sentence in multiple languages, we create a graph with words as nodes and alignment links as edges by aligning words for all language pairs. We then propagate node labels from source to target using a Graph Neural Network augmented with transformer layers. We show that our propagation creates training sets that allow us to train POS taggers for a diverse set of languages. When combined with enhanced contextualized embeddings, our method achieves a new state-of-the-art for unsupervised POS tagging of low-resource languages.

Model compression offers a promising path to reducing the cost and inaccessibility of large pre-trained models, without significantly compromising their impressive performance. Large Transformer models, including large language models (LLMs), often contain computational redundancy, which can serve as a target for new model compression methods. In this work, we specifically target neuron-level redundancies in model layers by combining groups of similar neurons into fewer neurons. We frame this width reduction as a Discrete Optimal Transport problem, and propose DOTResize, a novel Transformer compression method that uses optimal transport theory to transform and compress model weights. To ensure applicability within the Transformer architecture, we motivate and incorporate entropic regularization and matrix factorization into the transportation maps produced by our method. Unlike pruning-based approaches which discard neurons based on importance measures, DOTResize re-projects the entire neuron width, allowing the retention and redistribution of useful signal across the reduced layer. Empirical results show that compared to simple or state-of-the-art neuron width-pruning techniques, DOTResize can outperform these methods across multiple LLM families and sizes, while achieving measurable reductions in real-world computational cost.

Natural scenes provide us with rich contexts for object recognition and reference. In particular, knowing what type of scene one is looking at generates expectations about which objects will occur, and what their spatial configuration should be. Do Vision-Language Models (VLMs) learn to rely on scene contexts in a similar way, when generating references to objects? To address this question, we introduce the Common Objects Out-of-Context (COOCO) dataset and test to what extent VLMs rely on scene context to refer to objects under different degrees of scene-object congruency, and different perturbations. Our findings show that models leverage scene context adaptively, depending on both the semantic relatedness between object and scene and the level of noise. In particular, models rely more on context under high target-scene congruence or when objects are degraded. Attention analysis reveals that successful object categorisation involves increased focus on the target in mid-level layers, especially under moderate noise, suggesting that VLMs dynamically balance local and contextual information for reference generation. We make our dataset, code and models available at https://github.com/cs-nlp-uu/scenereg{https://github.com/cs-nlp-uu/scenereg}.

Multimodal Large Language Models (MLLMs) have recently demonstrated impressive capabilities in connecting vision and language, yet their proficiency in fundamental visual reasoning tasks remains limited. This limitation can be attributed to the fact that MLLMs learn visual understanding primarily from textual descriptions, which constitute a subjective and inherently incomplete supervisory signal. Furthermore, the modest scale of multimodal instruction tuning compared to massive text-only pre-training leads MLLMs to overfit language priors while overlooking visual details. To address these issues, we introduce JARVIS, a JEPA-inspired framework for self-supervised visual enhancement in MLLMs. Specifically, we integrate the I-JEPA learning paradigm into the standard vision-language alignment pipeline of MLLMs training. Our approach leverages frozen vision foundation models as context and target encoders, while training the predictor, implemented as the early layers of an LLM, to learn structural and semantic regularities from images without relying exclusively on language supervision. Extensive experiments on standard MLLM benchmarks show that JARVIS consistently improves performance on vision-centric benchmarks across different LLM families, without degrading multimodal reasoning abilities. Our source code is publicly available at: https://github.com/aimagelab/JARVIS.

The immense model sizes of large language models (LLMs) challenge deployment on memory-limited consumer GPUs. Although model compression and parameter offloading are common strategies to address memory limitations, compression can degrade quality, and offloading maintains quality but suffers from slow inference. Speculative decoding presents a promising avenue to accelerate parameter offloading, utilizing a fast draft model to propose multiple draft tokens, which are then verified by the target LLM in parallel with a single forward pass. This method reduces the time-consuming data transfers in forward passes that involve offloaded weight transfers. Existing methods often rely on pretrained weights of the same family, but require additional training to align with custom-trained models. Moreover, approaches that involve draft model training usually yield only modest speedups. This limitation arises from insufficient alignment with the target model, preventing higher token acceptance lengths. To address these challenges and achieve greater speedups, we propose SubSpec, a plug-and-play method to accelerate parameter offloading that is lossless and training-free. SubSpec constructs a highly aligned draft model by generating low-bit quantized substitute layers from offloaded target LLM portions. Additionally, our method shares the remaining GPU-resident layers and the KV-Cache, further reducing memory overhead and enhance alignment. SubSpec achieves a high average acceptance length, delivering 9.1x speedup for Qwen2.5 7B on MT-Bench (8GB VRAM limit) and an average of 12.5x speedup for Qwen2.5 32B on popular generation benchmarks (24GB VRAM limit).

This paper presents a novel joint neural networks approach to address the challenging one-shot object recognition and detection tasks. Inspired by Siamese neural networks and state-of-art multi-box detection approaches, the joint neural networks are able to perform object recognition and detection for categories that remain unseen during the training process. Following the one-shot object recognition/detection constraints, the training and testing datasets do not contain overlapped classes, in other words, all the test classes remain unseen during training. The joint networks architecture is able to effectively compare pairs of images via stacked convolutional layers of the query and target inputs, recognising patterns of the same input query category without relying on previous training around this category. The proposed approach achieves 61.41% accuracy for one-shot object recognition on the MiniImageNet dataset and 47.1% mAP for one-shot object detection when trained on the COCO dataset and tested using the Pascal VOC dataset. Code available at https://github.com/cjvargasc/JNN recog and https://github.com/cjvargasc/JNN detection/

PipeDream is a Deep Neural Network(DNN) training system for GPUs that parallelizes computation by pipelining execution across multiple machines. Its pipeline parallel computing model avoids the slowdowns faced by data-parallel training when large models and/or limited network bandwidth induce high communication-to-computation ratios. PipeDream reduces communication by up to 95% for large DNNs relative to data-parallel training, and allows perfect overlap of communication and computation. PipeDream keeps all available GPUs productive by systematically partitioning DNN layers among them to balance work and minimize communication, versions model parameters for backward pass correctness, and schedules the forward and backward passes of different inputs in round-robin fashion to optimize "time to target accuracy". Experiments with five different DNNs on two different clusters show that PipeDream is up to 5x faster in time-to-accuracy compared to data-parallel training.

We introduce ProLoRA, enabling zero-shot adaptation of parameter-efficient fine-tuning in text-to-image diffusion models. ProLoRA transfers pre-trained low-rank adjustments (e.g., LoRA) from a source to a target model without additional training data. This overcomes the limitations of traditional methods that require retraining when switching base models, often challenging due to data constraints. ProLoRA achieves this via projection of source adjustments into the target model's weight space, leveraging subspace and null space similarities and selectively targeting aligned layers. Evaluations on established text-to-image models demonstrate successful knowledge transfer and comparable performance without retraining.

Large-scale Text-to-Video (T2V) diffusion models have recently demonstrated unprecedented capability to transform natural language descriptions into stunning and photorealistic videos. Despite the promising results, a significant challenge remains: these models struggle to fully grasp complex compositional interactions between multiple concepts and actions. This issue arises when some words dominantly influence the final video, overshadowing other concepts.To tackle this problem, we introduce Vico, a generic framework for compositional video generation that explicitly ensures all concepts are represented properly. At its core, Vico analyzes how input tokens influence the generated video, and adjusts the model to prevent any single concept from dominating. Specifically, Vico extracts attention weights from all layers to build a spatial-temporal attention graph, and then estimates the influence as the max-flow from the source text token to the video target token. Although the direct computation of attention flow in diffusion models is typically infeasible, we devise an efficient approximation based on subgraph flows and employ a fast and vectorized implementation, which in turn makes the flow computation manageable and differentiable. By updating the noisy latent to balance these flows, Vico captures complex interactions and consequently produces videos that closely adhere to textual descriptions. We apply our method to multiple diffusion-based video models for compositional T2V and video editing. Empirical results demonstrate that our framework significantly enhances the compositional richness and accuracy of the generated videos. Visit our website at~https://adamdad.github.io/vico/{https://adamdad.github.io/vico/}.

Recent advancements in diffusion-based text-to-image (T2I) models have enabled the generation of high-quality and photorealistic images from text. However, they often exhibit societal biases related to gender, race, and socioeconomic status, thereby potentially reinforcing harmful stereotypes and shaping public perception in unintended ways. While existing bias mitigation methods demonstrate effectiveness, they often encounter attribute entanglement, where adjustments to attributes relevant to the bias (i.e., target attributes) unintentionally alter attributes unassociated with the bias (i.e., non-target attributes), causing undesirable distribution shifts. To address this challenge, we introduce Entanglement-Free Attention (EFA), a method that accurately incorporates target attributes (e.g., White, Black, and Asian) while preserving non-target attributes (e.g., background) during bias mitigation. At inference time, EFA randomly samples a target attribute with equal probability and adjusts the cross-attention in selected layers to incorporate the sampled attribute, achieving a fair distribution of target attributes. Extensive experiments demonstrate that EFA outperforms existing methods in mitigating bias while preserving non-target attributes, thereby maintaining the original model's output distribution and generative capacity.

Large Language Models (LLMs) exhibit strong multilingual performance despite being predominantly trained on English-centric corpora. This raises a fundamental question: How do LLMs achieve such multilingual capabilities? Focusing on languages written in non-Roman scripts, we investigate the role of Romanization - the representation of non-Roman scripts using Roman characters - as a potential bridge in multilingual processing. Using mechanistic interpretability techniques, we analyze next-token generation and find that intermediate layers frequently represent target words in Romanized form before transitioning to native script, a phenomenon we term Latent Romanization. Further, through activation patching experiments, we demonstrate that LLMs encode semantic concepts similarly across native and Romanized scripts, suggesting a shared underlying representation. Additionally, for translation into non-Roman script languages, our findings reveal that when the target language is in Romanized form, its representations emerge earlier in the model's layers compared to native script. These insights contribute to a deeper understanding of multilingual representation in LLMs and highlight the implicit role of Romanization in facilitating language transfer.

Vision transformers (ViTs) have emerged as a popular backbone for visual tracking. However, complete ViT architectures are too cumbersome to deploy for unmanned aerial vehicle (UAV) tracking which extremely emphasizes efficiency. In this study, we discover that many layers within lightweight ViT-based trackers tend to learn relatively redundant and repetitive target representations. Based on this observation, we propose a similarity-guided layer adaptation approach to optimize the structure of ViTs. Our approach dynamically disables a large number of representation-similar layers and selectively retains only a single optimal layer among them, aiming to achieve a better accuracy-speed trade-off. By incorporating this approach into existing ViTs, we tailor previously complete ViT architectures into an efficient similarity-guided layer-adaptive framework, namely SGLATrack, for real-time UAV tracking. Extensive experiments on six tracking benchmarks verify the effectiveness of the proposed approach, and show that our SGLATrack achieves a state-of-the-art real-time speed while maintaining competitive tracking precision. Codes and models are available at https://github.com/GXNU-ZhongLab/SGLATrack.

In this study, we investigate whether non-English-centric LLMs, despite their strong performance, `think' in their respective dominant language: more precisely, `think' refers to how the representations of intermediate layers, when un-embedded into the vocabulary space, exhibit higher probabilities for certain dominant languages during generation. We term such languages as internal latent languages. We examine the latent language of three typical categories of models for Japanese processing: Llama2, an English-centric model; Swallow, an English-centric model with continued pre-training in Japanese; and LLM-jp, a model pre-trained on balanced English and Japanese corpora. Our empirical findings reveal that, unlike Llama2 which relies exclusively on English as the internal latent language, Japanese-specific Swallow and LLM-jp employ both Japanese and English, exhibiting dual internal latent languages. For any given target language, the model preferentially activates the latent language most closely related to it. In addition, we explore how intermediate layers respond to questions involving cultural conflicts between latent internal and target output languages. We further explore how the language identity shifts across layers while keeping consistent semantic meaning reflected in the intermediate layer representations. This study deepens the understanding of non-English-centric large language models, highlighting the intricate dynamics of language representation within their intermediate layers.

Recently, dynamic computation methods have shown notable acceleration for Large Language Models (LLMs) by skipping several layers of computations through elaborate heuristics or additional predictors. However, in the decoding process of existing approaches, different samples are assigned different computational budgets, which cannot guarantee a stable and precise acceleration effect. Furthermore, existing approaches generally skip multiple contiguous layers at the bottom or top of the layers, leading to a drastic change in the model's layer-wise representations, and thus a consequent performance degeneration. Therefore, we propose a Unified Layer Skipping strategy, which selects the number of layers to skip computation based solely on the target speedup ratio, and then skips the corresponding number of intermediate layer computations in a balanced manner. Since the Unified Layer Skipping strategy is independent of input samples, it naturally supports popular acceleration techniques such as batch decoding and KV caching, thus demonstrating more practicality for real-world applications. Experimental results on two common tasks, i.e., machine translation and text summarization, indicate that given a target speedup ratio, the Unified Layer Skipping strategy significantly enhances both the inference performance and the actual model throughput over existing dynamic approaches.

Masked Image Modeling (MIM) achieves outstanding success in self-supervised representation learning. Unfortunately, MIM models typically have huge computational burden and slow learning process, which is an inevitable obstacle for their industrial applications. Although the lower layers play the key role in MIM, existing MIM models conduct reconstruction task only at the top layer of encoder. The lower layers are not explicitly guided and the interaction among their patches is only used for calculating new activations. Considering the reconstruction task requires non-trivial inter-patch interactions to reason target signals, we apply it to multiple local layers including lower and upper layers. Further, since the multiple layers expect to learn the information of different scales, we design local multi-scale reconstruction, where the lower and upper layers reconstruct fine-scale and coarse-scale supervision signals respectively. This design not only accelerates the representation learning process by explicitly guiding multiple layers, but also facilitates multi-scale semantical understanding to the input. Extensive experiments show that with significantly less pre-training burden, our model achieves comparable or better performance on classification, detection and segmentation tasks than existing MIM models.

In this paper, we propose two modified neural networks based on dual path multi-scale fusion networks (SFANet) and SegNet for accurate and efficient crowd counting. Inspired by SFANet, the first model, which is named M-SFANet, is attached with atrous spatial pyramid pooling (ASPP) and context-aware module (CAN). The encoder of M-SFANet is enhanced with ASPP containing parallel atrous convolutional layers with different sampling rates and hence able to extract multi-scale features of the target object and incorporate larger context. To further deal with scale variation throughout an input image, we leverage the CAN module which adaptively encodes the scales of the contextual information. The combination yields an effective model for counting in both dense and sparse crowd scenes. Based on the SFANet decoder structure, M-SFANet's decoder has dual paths, for density map and attention map generation. The second model is called M-SegNet, which is produced by replacing the bilinear upsampling in SFANet with max unpooling that is used in SegNet. This change provides a faster model while providing competitive counting performance. Designed for high-speed surveillance applications, M-SegNet has no additional multi-scale-aware module in order to not increase the complexity. Both models are encoder-decoder based architectures and are end-to-end trainable. We conduct extensive experiments on five crowd counting datasets and one vehicle counting dataset to show that these modifications yield algorithms that could improve state-of-the-art crowd counting methods. Codes are available at https://github.com/Pongpisit-Thanasutives/Variations-of-SFANet-for-Crowd-Counting.

Recent reasoning Large Language Models produce a chain-of-thought (CoT) predominantly in English, even when prompted in non-English languages. Prior work suggests that forcing the CoT to remain in the input language (native reasoning) substantially degrades performance relative to allowing the model to reason in English before answering in the input language (English-pivoted reasoning). However, most studies of this native reasoning gap rely on inference-time interventions or limited native-language training data. We revisit this comparison at a larger scale and under comparable supervision. We construct long multilingual reasoning datasets across six languages (English, French, German, Spanish, Chinese and Swahili); fine-tune specialists in both native and English-pivoted regimes on top of Qwen/Qwen3-8B-Base, and evaluate across mathematics, science, general knowledge, and code. In this setting, the average native reasoning gap shrinks to 1.9--3.5\% across the five non-English languages, considerably smaller than previously reported. Weight-space analysis of the native specialists reveals aligned fine-tuning updates in the middle layers and divergence in the outer layers. This points to a largely language-agnostic reasoning core surrounded by language-specific layers. Exploiting this structure, we introduce a Layer Swap: transferring the English specialist's stronger reasoning mid-layers into each native specialist, closing most of the native reasoning gap across the five non-English languages while preserving CoT in the target language. We release all models and datasets.

Controlling the motion of multiple objects in image-to-video (I2V) generation requires preserving object identities while enforcing adherence to distinct target trajectories. This becomes particularly challenging as the number of objects increases and their paths intersect or occlude one another. Existing approaches entangle multiple trajectories within a shared, dense conditioning signal, making object-level correspondence difficult to preserve in crowded scenes. We depart from this paradigm and enforce a strict, per object spatial constraint that isolates instances independently. Our method, TrajLoc, achieves this directly within the attention layers by substituting the cross-attention weights of each object token with a Gaussian heatmap centered on its target location at every frame. The same per object token interface carries trajectory and depth through a learned embedding and preserves identity by encoding first frame appearance in place of an object token. Evaluations across six datasets, featuring up to 20 simultaneously controlled objects and out of distribution real world scenes, demonstrate that our method consistently improves both visual fidelity and trajectory adherence. Applied to two architecturally distinct backbones (CogVideoX 5B and WaN 2.1 14B), our approach achieves average gains of +4.3 dB PSNR and a 51% reduction in trajectory end point error compared to the strongest baselines. Project page: https://sela-omer.github.io/traj-loc/

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

Subliminal learning describes a student language model inheriting a behavioral bias by fine-tuning on seemingly innocuous data generated by a biased teacher model. Prior work has begun to characterize this phenomenon but leaves open questions about the scope of signals it can transfer, the mechanisms that explain it, and the precision with which a bias can be encoded by seemingly unrelated data. We tackle all three problems by introducing subliminal steering, a variant of subliminal learning in which the teacher's bias is implemented not via a system prompt, as in prior work, but through a steering vector trained to maximize the likelihood of a set of target samples. First, we show that subliminal steering transfers complex multi-word biases, whereas prior work focused on single-word preferences, demonstrating a large scope of subliminally transferrable signals. Second, we provide mechanistic evidence that subliminal learning transfers not only the target behavioral bias, but also the steering vector itself, localized to the layers at which the teacher was steered. Finally, we show that the bias is encoded with surprising precision. We train a new steering vector directly on the subliminally-laden dataset and find that it attains high cosine similarity with the original vector.

Recent advances in text-to-image (T2I) diffusion models have seen rapid and widespread adoption. However, their powerful generative capabilities raise concerns about potential misuse for synthesizing harmful, private, or copyrighted content. To mitigate such risks, concept erasure techniques have emerged as a promising solution. Prior works have primarily focused on fine-tuning the denoising component (e.g., the U-Net backbone). However, recent causal tracing studies suggest that visual attribute information is localized in the early self-attention layers of the text encoder, indicating a potential alternative for concept erasing. Building on this insight, we conduct preliminary experiments and find that directly fine-tuning early layers can suppress target concepts but often degrades the generation quality of non-target concepts. To overcome this limitation, we propose High-Level Representation Misdirection (HiRM), which misdirects high-level semantic representations of target concepts in the text encoder toward designated vectors such as random directions or semantically defined directions (e.g., supercategories), while updating only early layers that contain causal states of visual attributes. Our decoupling strategy enables precise concept removal with minimal impact on unrelated concepts, as demonstrated by strong results on UnlearnCanvas and NSFW benchmarks across diverse targets (e.g., objects, styles, nudity). HiRM also preserves generative utility at low training cost, transfers to state-of-the-art architectures such as Flux without additional training, and shows synergistic effects with denoiser-based concept erasing methods.

Composed Video Retrieval (CoVR) facilitates video retrieval by combining visual and textual queries. However, existing CoVR frameworks typically fuse multimodal inputs in a single stage, achieving only marginal gains over initial baseline. To address this, we propose a novel CoVR framework that leverages the representational power of Vision Language Models (VLMs). Our framework incorporates a novel cross-attention module X-Aligner, composed of cross-attention layers that progressively fuse visual and textual inputs and align their multimodal representation with that of the target video. To further enhance the representation of the multimodal query, we incorporate the caption of the visual query as an additional input. The framework is trained in two stages to preserve the pretrained VLM representation. In the first stage, only the newly introduced module is trained, while in the second stage, the textual query encoder is also fine-tuned. We implement our framework on top of BLIP-family architecture, namely BLIP and BLIP-2, and train it on the Webvid-CoVR data set. In addition to in-domain evaluation on Webvid-CoVR-Test, we perform zero-shot evaluations on the Composed Image Retrieval (CIR) data sets CIRCO and Fashion-IQ. Our framework achieves state-of-the-art performance on CoVR obtaining a Recall@1 of 63.93% on Webvid-CoVR-Test, and demonstrates strong zero-shot generalization on CIR tasks.

Knowledge transfer between heterogeneous source and target networks and tasks has received a lot of attention in recent times as large amounts of quality labeled data can be difficult to obtain in many applications. Existing approaches typically constrain the target deep neural network (DNN) feature representations to be close to the source DNNs feature representations, which can be limiting. We, in this paper, propose a novel adversarial multi-armed bandit approach that automatically learns to route source representations to appropriate target representations following which they are combined in meaningful ways to produce accurate target models. We see upwards of 5\% accuracy improvements compared with the state-of-the-art knowledge transfer methods on four benchmark (target) image datasets CUB200, Stanford Dogs, MIT67, and Stanford40 where the source dataset is ImageNet. We qualitatively analyze the goodness of our transfer scheme by showing individual examples of the important features focused on by our target network at different layers compared with the (closest) competitors. We also observe that our improvement over other methods is higher for smaller target datasets making it an effective tool for small data applications that may benefit from transfer learning.

Deep neural networks have a clear degradation when applying to the unseen environment due to the covariate shift. Conventional approaches like domain adaptation requires the pre-collected target data for iterative training, which is impractical in real-world applications. In this paper, we propose to adapt the deep models to the novel environment during inference. An previous solution is test time normalization, which substitutes the source statistics in BN layers with the target batch statistics. However, we show that test time normalization may potentially deteriorate the discriminative structures due to the mismatch between target batch statistics and source parameters. To this end, we present a general formulation alpha-BN to calibrate the batch statistics by mixing up the source and target statistics for both alleviating the domain shift and preserving the discriminative structures. Based on alpha-BN, we further present a novel loss function to form a unified test time adaptation framework Core, which performs the pairwise class correlation online optimization. Extensive experiments show that our approaches achieve the state-of-the-art performance on total twelve datasets from three topics, including model robustness to corruptions, domain generalization on image classification and semantic segmentation. Particularly, our alpha-BN improves 28.4\% to 43.9\% on GTA5 rightarrow Cityscapes without any training, even outperforms the latest source-free domain adaptation method.

Large-scale cross-lingual language models (LM), such as mBERT, Unicoder and XLM, have achieved great success in cross-lingual representation learning. However, when applied to zero-shot cross-lingual transfer tasks, most existing methods use only single-language input for LM finetuning, without leveraging the intrinsic cross-lingual alignment between different languages that proves essential for multilingual tasks. In this paper, we propose FILTER, an enhanced fusion method that takes cross-lingual data as input for XLM finetuning. Specifically, FILTER first encodes text input in the source language and its translation in the target language independently in the shallow layers, then performs cross-language fusion to extract multilingual knowledge in the intermediate layers, and finally performs further language-specific encoding. During inference, the model makes predictions based on the text input in the target language and its translation in the source language. For simple tasks such as classification, translated text in the target language shares the same label as the source language. However, this shared label becomes less accurate or even unavailable for more complex tasks such as question answering, NER and POS tagging. To tackle this issue, we further propose an additional KL-divergence self-teaching loss for model training, based on auto-generated soft pseudo-labels for translated text in the target language. Extensive experiments demonstrate that FILTER achieves new state of the art on two challenging multilingual multi-task benchmarks, XTREME and XGLUE.

Many deep neural networks trained on natural images exhibit a curious phenomenon in common: on the first layer they learn features similar to Gabor filters and color blobs. Such first-layer features appear not to be specific to a particular dataset or task, but general in that they are applicable to many datasets and tasks. Features must eventually transition from general to specific by the last layer of the network, but this transition has not been studied extensively. In this paper we experimentally quantify the generality versus specificity of neurons in each layer of a deep convolutional neural network and report a few surprising results. Transferability is negatively affected by two distinct issues: (1) the specialization of higher layer neurons to their original task at the expense of performance on the target task, which was expected, and (2) optimization difficulties related to splitting networks between co-adapted neurons, which was not expected. In an example network trained on ImageNet, we demonstrate that either of these two issues may dominate, depending on whether features are transferred from the bottom, middle, or top of the network. We also document that the transferability of features decreases as the distance between the base task and target task increases, but that transferring features even from distant tasks can be better than using random features. A final surprising result is that initializing a network with transferred features from almost any number of layers can produce a boost to generalization that lingers even after fine-tuning to the target dataset.

Vision language models (VLMs) typically pair a modestly sized vision encoder with a large language model (LLM), e.g., Llama-70B, making the decoder the primary computational burden during training. To reduce costs, a potential promising strategy is to first train the vision encoder using a small language model before transferring it to the large one. We construct small "surrogate models" that share the same embedding space and representation language as the large target LLM by directly inheriting its shallow layers. Vision encoders trained on the surrogate can then be directly transferred to the larger model, a process we call zero-shot grafting -- when plugged directly into the full-size target LLM, the grafted pair surpasses the encoder-surrogate pair and, on some benchmarks, even performs on par with full decoder training with the target LLM. Furthermore, our surrogate training approach reduces overall VLM training costs by ~45% when using Llama-70B as the decoder.

Speculative decoding has demonstrated its effectiveness in accelerating the inference of large language models while maintaining a consistent sampling distribution. However, the conventional approach of training a separate draft model to achieve a satisfactory token acceptance rate can be costly. Drawing inspiration from early exiting, we propose a novel self-speculative decoding framework Kangaroo, which uses a fixed shallow sub-network as a self-draft model, with the remaining layers serving as the larger target model. We train a lightweight and efficient adapter module on top of the sub-network to bridge the gap between the sub-network and the full model's representation ability. It is noteworthy that the inference latency of the self-draft model may no longer be negligible compared to the large model, necessitating strategies to increase the token acceptance rate while minimizing the drafting steps of the small model. To address this challenge, we introduce an additional early exiting mechanism for generating draft tokens. Specifically, we halt the small model's subsequent prediction during the drafting phase once the confidence level for the current token falls below a certain threshold. Extensive experiments on the Spec-Bench demonstrate the effectiveness of Kangaroo. Under single-sequence verification, Kangaroo achieves speedups up to 1.68times on Spec-Bench, outperforming Medusa-1 with 88.7\% fewer additional parameters (67M compared to 591M). The code for Kangaroo is available at https://github.com/Equationliu/Kangaroo.

Autoregressive neural codec language models have shown strong zero-shot voice cloning ability, but decoder-only architectures treat input text as a prefix that competes with the growing audio sequence for positional capacity, weakening text conditioning over long utterances. We present T5Gemma-TTS, an encoder-decoder codec language model that maintains persistent text conditioning by routing bidirectional text representations through cross-attention at every decoder layer. Built on the T5Gemma pretrained encoder-decoder backbone (2B encoder + 2B decoder; 4B parameters), it inherits rich linguistic knowledge without phoneme conversion and processes text directly at the subword level. To improve duration control, we introduce Progress-Monitoring Rotary Position Embedding (PM-RoPE) in all 26 cross-attention layers, injecting normalized progress signals that help the decoder track target speech length. Trained on 170,000 hours of multilingual speech in English, Chinese, and Japanese, T5Gemma-TTS achieves a statistically significant speaker-similarity gain on Japanese over XTTSv2 (0.677 vs. 0.622; non-overlapping 95% confidence intervals) and the highest numerical Korean speaker similarity (0.747) despite Korean not being included in training, although this margin over XTTSv2 (0.741) is not statistically conclusive. It also attains the lowest numerical Japanese character error rate among five baselines (0.126), though this ranking should be interpreted cautiously because of partial confidence-interval overlap with Kokoro. English results on LibriSpeech should be viewed as an upper-bound estimate because LibriHeavy is a superset of LibriSpeech. Using the same checkpoint, disabling PM-RoPE at inference causes near-complete synthesis failure: CER degrades from 0.129 to 0.982 and duration accuracy drops from 79% to 46%. Code and weights are available at https://github.com/Aratako/T5Gemma-TTS.

This work presents Controllable Layer Decomposition (CLD), a method for achieving fine-grained and controllable multi-layer separation of raster images. In practical workflows, designers typically generate and edit each RGBA layer independently before compositing them into a final raster image. However, this process is irreversible: once composited, layer-level editing is no longer possible. Existing methods commonly rely on image matting and inpainting, but remain limited in controllability and segmentation precision. To address these challenges, we propose two key modules: LayerDecompose-DiT (LD-DiT), which decouples image elements into distinct layers and enables fine-grained control; and Multi-Layer Conditional Adapter (MLCA), which injects target image information into multi-layer tokens to achieve precise conditional generation. To enable a comprehensive evaluation, we build a new benchmark and introduce tailored evaluation metrics. Experimental results show that CLD consistently outperforms existing methods in both decomposition quality and controllability. Furthermore, the separated layers produced by CLD can be directly manipulated in commonly used design tools such as PowerPoint, highlighting its practical value and applicability in real-world creative workflows.

The popularity of LLaMA (Touvron et al., 2023a;b) and other recently emerged moderate-sized large language models (LLMs) highlights the potential of building smaller yet powerful LLMs. Regardless, the cost of training such models from scratch on trillions of tokens remains high. In this work, we study structured pruning as an effective means to develop smaller LLMs from pre-trained, larger models. Our approach employs two key techniques: (1) targeted structured pruning, which prunes a larger model to a specified target shape by removing layers, heads, and intermediate and hidden dimensions in an end-to-end manner, and (2) dynamic batch loading, which dynamically updates the composition of sampled data in each training batch based on varying losses across different domains. We demonstrate the efficacy of our approach by presenting the Sheared-LLaMA series, pruning the LLaMA2-7B model down to 1.3B and 2.7B parameters. Sheared-LLaMA models outperform state-of-the-art open-source models of equivalent sizes, such as Pythia, INCITE, and OpenLLaMA models, on a wide range of downstream and instruction tuning evaluations, while requiring only 3% of compute compared to training such models from scratch. This work provides compelling evidence that leveraging existing LLMs with structured pruning is a far more cost-effective approach for building smaller LLMs.

Multimodal large language models (MLLMs) have shown impressive capabilities, yet they often struggle to effectively capture the fine-grained textual information within images crucial for accurate image translation. This often leads to a modality gap between visual text inputs and textual inputs/outputs for image translation. Existing methods, primarily relying on instruction fine-tuning, risk parameter redundancy of pre-trained knowledge, hindering generalization performance. To address this, we introduce modality neuron-aware fine-tuning (MNAFT), a novel approach that takes advantage of the specialized roles of individual neurons within MLLMs for enhanced image translation. MNAFT identifies language-agnostic and language-specific neurons in both vision and language modules through an instruction-driven activation analysis, evaluating their importance in various translation tasks. We then perform selective fine-tuning, updating only the parameters of language-specific and language-agnostic neurons within the selected layers relevant to the target task, while preserving the knowledge encoded in other neurons and layers. Our extensive experiments on multiple benchmarks demonstrate that MNAFT significantly outperforms state-of-the-art image translation methods, including cascaded models, standard full fine-tuning, and parameter-efficient tuning techniques. Furthermore, we provide comprehensive analysis, including visualizations of neuron activations and clustering patterns, to offer insights into the roles of different neuron groups in mediating cross-modal understanding and facilitating accurate language-specific translation.

Speculative decoding accelerates LLM inference by drafting future tokens with a small model, but drafter models degrade sharply under template perturbation and long-context inputs. We identify a previously-unreported phenomenon we call attention drift: as the drafter generates successive tokens within a speculation chain, attention progressively moves from the prompt onto its own recently-generated tokens. We observe this across both EAGLE3 drafters and MTP heads, suggesting drift is a property of drafter designs. We trace this to the un-normalized residual path between chain steps: the drafter's hidden state magnitude grows monotonically with chain depth, which exhibits dynamics consistent with additional pre-norm transformer layers stacked on the target rather than as a standalone autoregressive predictor. In order to limit the growth, we propose two architectural changes: Post-norm on the drafter hidden states and per-hidden-state RMSNorm after capturing target hidden states. Our interventions improve acceptance length over the current leading model, pre-norm EAGLE3, by up to 2times under template perturbation, 1.18times on long-context tasks, and 1.10times on seven standard benchmarks spanning multi-turn chat, math, and coding. Our changes also allow shorter train-time-test depths to generalize over longer drafting sequences.

Inference-time techniques are emerging as highly effective tools to enhance large language model (LLM) capabilities. However, best practices for developing systems that combine these techniques remain underdeveloped due to our limited understanding of the utility of individual inference-time techniques and the interactions between them. Additionally, efficiently and automatically searching the space of model choices, inference-time techniques, and their compositions is challenging due to the large design space. To address these challenges, we introduce Archon, a modular framework for selecting, combining, and stacking layers of inference-time techniques to construct optimized LLM systems for target benchmarks. Rather than relying on a single LLM called once, we leverage a diverse set of LLMs and inference-time techniques, creating LLM systems greater than the sum of their parts. Archon defines an extensible design space, encompassing techniques such as generation ensembling, repeated sampling, ranking, fusion, critiquing, verification, and unit testing. It transforms the problem of building LLM systems into a hyperparameter optimization objective. Given the available LLMs, inference-time techniques, and compute budget, Archon utilizes hyperparameter search techniques to discover optimized architectures for target benchmark(s). We evaluate Archon architectures across a range of instruction-following, reasoning, and coding benchmarks, including MT-Bench, Arena-Hard-Auto, AlpacaEval 2.0, MixEval, MixEval Hard, MATH, and CodeContests. Archon architectures outperform frontier models, such as GPT-4o and Claude 3.5 Sonnet, on these benchmarks, achieving an average accuracy increase of 15.1 percentage points by using all available LLMs. We make our code and datasets available publicly on Github: https://github.com/ScalingIntelligence/Archon.

Testing is a core activity in software development workflows, and research on its automation has spanned several decades. Most existing approaches generate unit tests for individual methods, validate isolated API endpoints, or target user interface (UI) layers, with non-API and non-UI automated test generators typically exercising only a single focal method. Recent empirical evidence shows a substantial gap between such generated tests and developer-written ones, which often span multiple focal methods, involve complex call sequences, and contain elaborate assertions that current automated approaches fail to capture. To address this gap, we propose generating tests from natural language (NL) descriptions of developer intent. We present Sakura, the first agent-based framework for generating structurally complex test cases from NL descriptions. Sakura decomposes NL descriptions into structured blocks and processes them using a multi-agent system consisting of a localization agent that grounds test steps in concrete application code via static analysis, a composition agent that synthesizes compilable test code and iteratively refines it using execution feedback, and a supervisor agent that coordinates agent interactions. To evaluate Sakura, we curate a novel dataset of NL test descriptions at three levels of abstraction, systematically generated from developer-written tests mined from Apache Commons projects. Across 20 applications and 1,464 test scenarios, Sakura significantly outperforms off-the-shelf agentic tools such as Gemini CLI. Specifically, Sakura achieves 50-78% higher test compilability and 38-66% higher coverage overlap with ground-truth tests compared to baselines using the same models. Moreover, Sakura paired with small open-source models such as Devstral Small 2 and Qwen3-Coder outperforms Gemini CLI using large proprietary models, while also being more cost-effective.

Existing training-free approaches for GUI grounding often rely on multiple inference runs, such as iterative cropping or candidate aggregation, to identify target elements. Despite this additional computation, each forward pass still independently interprets the instruction and parses the visual layout, without enabling progressive interaction among visual tokens. In this paper, we study what happens during GUI grounding in Vision-Language Models (VLMs) and identify a previously overlooked bottleneck. We show that grounding follows a two-stage paradigm: the prefill stage determines candidate UI elements, while the decoding stage subsequently refines the final coordinates. This asymmetry establishes prefill as the critical step, as errors in candidate selection cannot be effectively corrected during decoding. Based on this observation, we propose Re-Prefill, a training-free method that revisits inference by introducing an attention-guided second prefill stage to refine target selection. Specifically, visual tokens that consistently receive high attention from the query position, i.e., the final token, across layers are extracted as a preliminary target hypothesis and appended to the input, together with the instruction hidden states, enabling the model to deeply re-think its decision before coordinate generation. Experiments across four VLMs and five benchmarks, including ScreenSpot-Pro, ScreenSpot-V2, OSWorld-G, UI-Vision, and MMBench-GUI, demonstrate consistent improvements without additional training, with gains of up to 4.3% on ScreenSpot-Pro. Code will be available at https://github.com/linjiaping1/Re-Prefill.

We propose an efficient layer-specific optimization (ELO) method designed to enhance continual pretraining (CP) for specific languages in multilingual large language models (MLLMs). This approach addresses the common challenges of high computational cost and degradation of source language performance associated with traditional CP. The ELO method consists of two main stages: (1) ELO Pretraining, where a small subset of specific layers, identified in our experiments as the critically important first and last layers, are detached from the original MLLM and trained with the target language. This significantly reduces not only the number of trainable parameters but also the total parameters computed during the forward pass, minimizing GPU memory consumption and accelerating the training process. (2) Layer Alignment, where the newly trained layers are reintegrated into the original model, followed by a brief full fine-tuning step on a small dataset to align the parameters. Experimental results demonstrate that the ELO method achieves a training speedup of up to 6.46 times compared to existing methods, while improving target language performance by up to 6.2\% on qualitative benchmarks and effectively preserving source language (English) capabilities.

Document understanding and analysis have received a lot of attention due to their widespread application. However, existing document analysis solutions, such as document layout analysis and key information extraction, are only suitable for fixed category definitions and granularities, and cannot achieve flexible applications customized by users. Therefore, this paper defines a new task named ``Class-Agnostic Region-of-Interest Matching'' (``RoI-Matching'' for short), which aims to match the customized regions in a flexible, efficient, multi-granularity, and open-set manner. The visual prompt of the reference document and target document images are fed into our model, while the output is the corresponding bounding boxes in the target document images. To meet the above requirements, we construct a benchmark RoI-Matching-Bench, which sets three levels of difficulties following real-world conditions, and propose the macro and micro metrics to evaluate. Furthermore, we also propose a new framework RoI-Matcher, which employs a siamese network to extract multi-level features both in the reference and target domains, and cross-attention layers to integrate and align similar semantics in different domains. Experiments show that our method with a simple procedure is effective on RoI-Matching-Bench, and serves as the baseline for further research. The code is available at https://github.com/pd162/RoI-Matching.

In this study, we introduce the Multi-Head Explainer (MHEX), a versatile and modular framework that enhances both the explainability and accuracy of Convolutional Neural Networks (CNNs) and Transformer-based models. MHEX consists of three core components: an Attention Gate that dynamically highlights task-relevant features, Deep Supervision that guides early layers to capture fine-grained details pertinent to the target class, and an Equivalent Matrix that unifies refined local and global representations to generate comprehensive saliency maps. Our approach demonstrates superior compatibility, enabling effortless integration into existing residual networks like ResNet and Transformer architectures such as BERT with minimal modifications. Extensive experiments on benchmark datasets in medical imaging and text classification show that MHEX not only improves classification accuracy but also produces highly interpretable and detailed saliency scores.

Speculative decoding (SD) has emerged as a widely used paradigm to accelerate the inference of large language models (LLMs) without compromising generation quality. It works by first employing a compact model to draft multiple tokens efficiently and then using the target LLM to verify them in parallel. While this technique has achieved notable speedups, most existing approaches necessitate either additional parameters or extensive training to construct effective draft models, thereby restricting their applicability across different LLMs and tasks. To address this limitation, we explore a novel plug-and-play SD solution with layer-skipping, which skips intermediate layers of the target LLM as the compact draft model. Our analysis reveals that LLMs exhibit great potential for self-acceleration through layer sparsity and the task-specific nature of this sparsity. Building on these insights, we introduce SWIFT, an on-the-fly self-speculative decoding algorithm that adaptively selects intermediate layers of LLMs to skip during inference. SWIFT does not require auxiliary models or additional training, making it a plug-and-play solution for accelerating LLM inference across diverse input data streams. Our extensive experiments across a wide range of models and downstream tasks demonstrate that SWIFT can achieve over a 1.3x-1.6x speedup while preserving the original distribution of the generated text.

We analyze the operation of transformer language adapters, which are small modules trained on top of a frozen language model to adapt its predictions to new target languages. We show that adapted predictions mostly evolve in the source language the model was trained on, while the target language becomes pronounced only in the very last layers of the model. Moreover, the adaptation process is gradual and distributed across layers, where it is possible to skip small groups of adapters without decreasing adaptation performance. Last, we show that adapters operate on top of the model's frozen representation space while largely preserving its structure, rather than on an 'isolated' subspace. Our findings provide a deeper view into the adaptation process of language models to new languages, showcasing the constraints imposed on it by the underlying model and introduces practical implications to enhance its efficiency.

This manuscript considers the problem of learning a random Gaussian network function using a fully connected network with frozen intermediate layers and trainable readout layer. This problem can be seen as a natural generalization of the widely studied random features model to deeper architectures. First, we prove Gaussian universality of the test error in a ridge regression setting where the learner and target networks share the same intermediate layers, and provide a sharp asymptotic formula for it. Establishing this result requires proving a deterministic equivalent for traces of the deep random features sample covariance matrices which can be of independent interest. Second, we conjecture the asymptotic Gaussian universality of the test error in the more general setting of arbitrary convex losses and generic learner/target architectures. We provide extensive numerical evidence for this conjecture, which requires the derivation of closed-form expressions for the layer-wise post-activation population covariances. In light of our results, we investigate the interplay between architecture design and implicit regularization.

We introduce Equilibrium Propagation, a learning framework for energy-based models. It involves only one kind of neural computation, performed in both the first phase (when the prediction is made) and the second phase of training (after the target or prediction error is revealed). Although this algorithm computes the gradient of an objective function just like Backpropagation, it does not need a special computation or circuit for the second phase, where errors are implicitly propagated. Equilibrium Propagation shares similarities with Contrastive Hebbian Learning and Contrastive Divergence while solving the theoretical issues of both algorithms: our algorithm computes the gradient of a well defined objective function. Because the objective function is defined in terms of local perturbations, the second phase of Equilibrium Propagation corresponds to only nudging the prediction (fixed point, or stationary distribution) towards a configuration that reduces prediction error. In the case of a recurrent multi-layer supervised network, the output units are slightly nudged towards their target in the second phase, and the perturbation introduced at the output layer propagates backward in the hidden layers. We show that the signal 'back-propagated' during this second phase corresponds to the propagation of error derivatives and encodes the gradient of the objective function, when the synaptic update corresponds to a standard form of spike-timing dependent plasticity. This work makes it more plausible that a mechanism similar to Backpropagation could be implemented by brains, since leaky integrator neural computation performs both inference and error back-propagation in our model. The only local difference between the two phases is whether synaptic changes are allowed or not.

Representation Autoencoders (RAE) replace traditional VAE with pretrained vision encoders. In this paper, we systematically investigate several design choices and find three insights which simplify and improve RAE. First, we study a generalized formulation where the representation is defined as sum of the last k encoder layers rather than solely the final layer. This simple change greatly improves reconstruction without encoder finetuning or specialized data (e.g., text, faces). Second, we study the prevalent assumption that RAE (using pretrained representation as encoder) replaces representation alignment (REPA), which distills the same representation to intermediate layers instead. Through large-scale empirical analysis, we uncover a surprising finding: RAE and REPA exhibit complementary working mechanisms, allowing the same representation to be used as both encoder and target for intermediate diffusion layers. Finally, the original RAE struggles with classifier-free guidance (CFG) and requires training a second, weaker diffusion model for AutoGuidance (AG). We show that REPA itself can be viewed as x-prediction in RAE latent space. By simply re-parameterizing the output of the DiT model, it can provide guidance for "free". Overall, RAEv2 leads to more than 10x faster convergence over the original RAE, achieving a state-of-the-art gFID of 1.06 in just 80 epochs on ImageNet-256. On FDr^k, RAEv2 achieves a state-of-the-art 2.17 at just 80 epochs compared to the previous best 3.26 (800 epochs) without any post-training. This motivates EP_FID@k (epochs to reach unguided gFID <= k) as a measure of training efficiency. RAEv2 attains an EP_FID@2 of 35 epochs, versus 177 for the original RAE. We also validate our approach across diverse settings for text-to-image generation and navigation world models, showing consistent improvements. Code is available at https://raev2.github.io.

In this paper, we investigate knowledge forgetting in large language models with a focus on its generalisation, ensuring that models forget not only specific training samples but also related implicit knowledge. To this end, we begin by identifying a broader unlearning scope that includes both target data and logically associated samples, including rephrased, subject-replaced, relation-reversed, and one-hop reasoned data. We then conduct a rigorous evaluation of 15 state-of-the-art methods across three datasets, revealing that unlearned models still recall paraphrased answers and retain target facts in their intermediate layers. This motivates us to take a preliminary step toward more generalised implicit knowledge forgetting by proposing PerMU, a novel probability perturbation-based unlearning paradigm. PerMU simulates adversarial unlearning samples to eliminate fact-related tokens from the logit distribution, collectively reducing the probabilities of all answer-associated tokens. Experiments are conducted on a diverse range of datasets, including TOFU, Harry Potter, ZsRE, WMDP, and MUSE, using models ranging from 1.3B to 13B in scale. The results demonstrate that PerMU delivers up to a 50.40% improvement in unlearning vanilla target data while maintaining a 40.73% boost in forgetting implicit knowledge. Our code can be found in https://github.com/MaybeLizzy/PERMU.

Video multi-target segmentation remains a major challenge in long sequences, mainly due to the inherent limitations of existing architectures in capturing global temporal dependencies. We introduce WISE-TTT, a synergistic architecture integrating Test-Time Training (TTT) mechanisms with the Transformer architecture through co-design. The TTT layer systematically compresses historical temporal data to generate hidden states containing worldwide information(Lossless memory to maintain long contextual integrity), while achieving multi-stage contextual aggregation through splicing. Crucially, our framework provides the first empirical validation that implementing worldwide information across multiple network layers is essential for optimal dependency utilization.Ablation studies show TTT modules at high-level features boost global modeling. This translates to 3.1% accuracy improvement(J&F metric) on Davis2017 long-term benchmarks -- the first proof of hierarchical context superiority in video segmentation. We provide the first systematic evidence that worldwide information critically impacts segmentation performance.

Computer vision researchers are embracing two promising paradigms: Vision Transformers (ViTs) and Multi-task Learning (MTL), which both show great performance but are computation-intensive, given the quadratic complexity of self-attention in ViT and the need to activate an entire large MTL model for one task. M^3ViT is the latest multi-task ViT model that introduces mixture-of-experts (MoE), where only a small portion of subnetworks ("experts") are sparsely and dynamically activated based on the current task. M^3ViT achieves better accuracy and over 80% computation reduction but leaves challenges for efficient deployment on FPGA. Our work, dubbed Edge-MoE, solves the challenges to introduce the first end-to-end FPGA accelerator for multi-task ViT with a collection of architectural innovations, including (1) a novel reordering mechanism for self-attention, which requires only constant bandwidth regardless of the target parallelism; (2) a fast single-pass softmax approximation; (3) an accurate and low-cost GELU approximation; (4) a unified and flexible computing unit that is shared by almost all computational layers to maximally reduce resource usage; and (5) uniquely for M^3ViT, a novel patch reordering method to eliminate memory access overhead. Edge-MoE achieves 2.24x and 4.90x better energy efficiency comparing with GPU and CPU, respectively. A real-time video demonstration is available online, along with our open-source code written using High-Level Synthesis.

Evaluation metrics are central to binary target segmentation because they determine how progress is measured, compared, and interpreted. In this paper, target denotes the task-defined positive region to be segmented rather than a generic foreground object. It may be salient, camouflaged, transparent, glass-like, mirror-like, shadow-like, lesion-like, or defined by other application-specific semantics. We treat existing metrics as compositions of modular design choices rather than isolated formulas. The proposed framework decomposes each metric into five stages covering prediction representation, target extraction, target matching, score computation, and metric reporting. We use this framework to analyze representative metrics and show how newer metrics address specific limits in earlier protocols. The stage choices keep each metric's assumptions visible. We then discuss the design space opened by the framework and its implications for task-aware evaluation protocols. Reference code is available at https://github.com/lartpang/PySODMetrics.

Speech foundation models, such as HuBERT and its variants, are pre-trained on large amounts of unlabeled speech data and then used for a range of downstream tasks. These models use a masked prediction objective, where the model learns to predict information about masked input segments from the unmasked context. The choice of prediction targets in this framework impacts their performance on downstream tasks. For instance, models pre-trained with targets that capture prosody learn representations suited for speaker-related tasks, while those pre-trained with targets that capture phonetics learn representations suited for content-related tasks. Moreover, prediction targets can differ in the level of detail they capture. Models pre-trained with targets that encode fine-grained acoustic features perform better on tasks like denoising, while those pre-trained with targets focused on higher-level abstractions are more effective for content-related tasks. Despite the importance of prediction targets, the design choices that affect them have not been thoroughly studied. This work explores the design choices and their impact on downstream task performance. Our results indicate that the commonly used design choices for HuBERT can be suboptimal. We propose approaches to create more informative prediction targets and demonstrate their effectiveness through improvements across various downstream tasks.

Layer-wise distillation is a powerful tool to compress large models (i.e. teacher models) into small ones (i.e., student models). The student distills knowledge from the teacher by mimicking the hidden representations of the teacher at every intermediate layer. However, layer-wise distillation is difficult. Since the student has a smaller model capacity than the teacher, it is often under-fitted. Furthermore, the hidden representations of the teacher contain redundant information that the student does not necessarily need for the target task's learning. To address these challenges, we propose a novel Task-aware layEr-wise Distillation (TED). TED designs task-aware filters to align the hidden representations of the student and the teacher at each layer. The filters select the knowledge that is useful for the target task from the hidden representations. As such, TED reduces the knowledge gap between the two models and helps the student to fit better on the target task. We evaluate TED in two scenarios: continual pre-training and fine-tuning. TED demonstrates significant and consistent improvements over existing distillation methods in both scenarios. Code is available at https://github.com/cliang1453/task-aware-distillation.

Recent advances in large language models have led to specialized models excelling in specific domains, creating a need for efficient model merging techniques. While traditional merging approaches combine parameters into a single static model, they often compromise task-specific performance. However, task-specific routing methods maintain accuracy but introduce substantial storage overhead. We present 1bit-Merging, a novel framework that integrates task-specific routing with 1-bit quantized task vectors to balance performance and storage efficiency. Our approach leverages the observation that different task-specific models store knowledge in distinct layers-chat models primarily in attention layers and math/code models in MLP layers-enabling targeted compression strategies. Through extensive experiments with LLaMA2 and Mistral model families across chat, mathematical reasoning, and code generation tasks, we demonstrate that 1bit-Merging achieves comparable or superior performance to existing methods while significantly reducing storage requirements. Our framework offers a practical solution for combining specialized models while maintaining their individual strengths and addressing the storage challenges of current approaches.

Attention layers -- which map a sequence of inputs to a sequence of outputs -- are core building blocks of the Transformer architecture which has achieved significant breakthroughs in modern artificial intelligence. This paper presents a rigorous theoretical study on the learning and generalization of a single multi-head attention layer, with a sequence of key vectors and a separate query vector as input. We consider the random feature setting where the attention layer has a large number of heads, with randomly sampled frozen query and key matrices, and trainable value matrices. We show that such a random-feature attention layer can express a broad class of target functions that are permutation invariant to the key vectors. We further provide quantitative excess risk bounds for learning these target functions from finite samples, using random feature attention with finitely many heads. Our results feature several implications unique to the attention structure compared with existing random features theory for neural networks, such as (1) Advantages in the sample complexity over standard two-layer random-feature networks; (2) Concrete and natural classes of functions that can be learned efficiently by a random-feature attention layer; and (3) The effect of the sampling distribution of the query-key weight matrix (the product of the query and key matrix), where Gaussian random weights with a non-zero mean result in better sample complexities over the zero-mean counterpart for learning certain natural target functions. Experiments on simulated data corroborate our theoretical findings and further illustrate the interplay between the sample size and the complexity of the target function.

Distilling pretrained softmax attention Transformers into more efficient hybrid architectures that interleave softmax and linear attention layers is a promising approach for improving the inference efficiency of LLMs without requiring expensive pretraining from scratch. A critical factor in the conversion process is layer selection, i.e., deciding on which layers to convert to linear attention variants. This paper describes a simple and efficient recipe for layer selection that uses layer importance scores derived from a small amount of training on generic text data. Once the layers have been selected we use a recent pipeline for the distillation process itself \citep[RADLADS;][]{goldstein2025radlads}, which consists of attention weight transfer, hidden state alignment, KL-based distribution matching, followed by a small amount of finetuning. We find that this approach is more effective than existing approaches for layer selection, including heuristics that uniformly interleave linear attentions based on a fixed ratio, as well as more involved approaches that rely on specialized diagnostic datasets.

Even a current high-capability LLM can appear safer when shown a dangerous objective directly than when other agents transform and relay its direction. Using OpenAI's gpt-5.6-sol model alias, we test 25 pre-specified mirrored trade-off profiles. Direct exposure to an objective authorizing concealment, fabrication, and pressure produced advice net opposed to its target. After an Id and Censor transformed the same objective into affect and a constraint-rewritten, target-bearing intention, the user-facing Superego---which saw the preferred direction but not the raw objective, its manipulative clauses, or its source---produced advice net aligned with the target. This behavioral reverse shift is consistent with the model recognizing or distrusting the manipulative motive, although we do not identify its internal mechanism. The second result exposes a compositional safety gap: a current high-capability model can be used as the user-facing component of an automated, multi-stage workflow serving an explicitly manipulative objective. The workflow can keep the raw instruction, its manipulation-authorizing clauses, and its provenance outside the downstream model's context while preserving the objective's target direction. A user with endpoint-only access likewise cannot directly inspect those upstream messages including the objective.

Every data selection method inherently has a target. In practice, these targets often emerge implicitly through benchmark-driven iteration: researchers develop selection strategies, train models, measure benchmark performance, then refine accordingly. This raises a natural question: what happens when we make this optimization explicit? To explore this, we propose benchmark-targeted ranking (BETR), a simple method that selects pretraining documents based on similarity to benchmark training examples. BETR embeds benchmark examples and a sample of pretraining documents in a shared space, scores this sample by similarity to benchmarks, then trains a lightweight classifier to predict these scores for the full corpus. We compare data selection methods by training over 500 models spanning 10^{19} to 10^{22} FLOPs and fitting scaling laws to them. From this, we find that simply aligning pretraining data to evaluation benchmarks using BETR achieves a 2.1x compute multiplier over DCLM-Baseline (4.7x over unfiltered data) and improves performance on 9 out of 10 tasks across all scales. BETR also generalizes well: when targeting a diverse set of benchmarks disjoint from our evaluation suite, it still matches or outperforms baselines. Our scaling analysis further reveals a clear trend: larger models require less aggressive filtering. Overall, our findings show that directly matching pretraining data to target tasks precisely shapes model capabilities and highlight that optimal selection strategies must adapt to model scale.

Large language models (LLMs) demonstrate strong task-specific capabilities through fine-tuning, but merging multiple fine-tuned models often leads to degraded performance due to overlapping instruction-following components. Task Arithmetic (TA), which combines task vectors derived from fine-tuning, enables multi-task learning and task forgetting but struggles to isolate task-specific knowledge from general instruction-following behavior. To address this, we propose Layer-Aware Task Arithmetic (LATA), a novel approach that assigns layer-specific weights to task vectors based on their alignment with instruction-following or task-specific components. By amplifying task-relevant layers and attenuating instruction-following layers, LATA improves task learning and forgetting performance while preserving overall model utility. Experiments on multiple benchmarks, including WikiText-2, GSM8K, and HumanEval, demonstrate that LATA outperforms existing methods in both multi-task learning and selective task forgetting, achieving higher task accuracy and alignment with minimal degradation in output quality. Our findings highlight the importance of layer-wise analysis in disentangling task-specific and general-purpose knowledge, offering a robust framework for efficient model merging and editing.

Recent advancements in large generative models, particularly diffusion-based methods, have significantly enhanced the capabilities of image editing. However, achieving precise control over image composition tasks remains a challenge. Layered representations, which allow for independent editing of image components, are essential for user-driven content creation, yet existing approaches often struggle to decompose image into plausible layers with accurately retained transparent visual effects such as shadows and reflections. We propose LayerDecomp, a generative framework for image layer decomposition which outputs photorealistic clean backgrounds and high-quality transparent foregrounds with faithfully preserved visual effects. To enable effective training, we first introduce a dataset preparation pipeline that automatically scales up simulated multi-layer data with synthesized visual effects. To further enhance real-world applicability, we supplement this simulated dataset with camera-captured images containing natural visual effects. Additionally, we propose a consistency loss which enforces the model to learn accurate representations for the transparent foreground layer when ground-truth annotations are not available. Our method achieves superior quality in layer decomposition, outperforming existing approaches in object removal and spatial editing tasks across several benchmarks and multiple user studies, unlocking various creative possibilities for layer-wise image editing. The project page is https://rayjryang.github.io/LayerDecomp.

The data landscape is rich with structured data, often of high value to organizations, driving important applications in data analysis and machine learning. Recent progress in representation learning and generative models for such data has led to the development of natural language interfaces to structured data, including those leveraging text-to-SQL. Contextualizing interactions, either through conversational interfaces or agentic components, in structured data through retrieval-augmented generation can provide substantial benefits in the form of freshness, accuracy, and comprehensiveness of answers. The key question is: how do we retrieve the right table(s) for the analytical query or task at hand? To this end, we introduce TARGET: a benchmark for evaluating TAble Retrieval for GEnerative Tasks. With TARGET we analyze the retrieval performance of different retrievers in isolation, as well as their impact on downstream tasks. We find that dense embedding-based retrievers far outperform a BM25 baseline which is less effective than it is for retrieval over unstructured text. We also surface the sensitivity of retrievers across various metadata (e.g., missing table titles), and demonstrate a stark variation of retrieval performance across datasets and tasks. TARGET is available at https://target-benchmark.github.io.

Transferable targeted adversarial attacks aim to mislead models into outputting adversary-specified predictions in black-box scenarios. Recent studies have introduced single-target generative attacks that train a generator for each target class to generate highly transferable perturbations, resulting in substantial computational overhead when handling multiple classes. Multi-target attacks address this by training only one class-conditional generator for multiple classes. However, the generator simply uses class labels as conditions, failing to leverage the rich semantic information of the target class. To this end, we design a CLIP-guided Generative Network with Cross-attention modules (CGNC) to enhance multi-target attacks by incorporating textual knowledge of CLIP into the generator. Extensive experiments demonstrate that CGNC yields significant improvements over previous multi-target generative attacks, e.g., a 21.46\% improvement in success rate from ResNet-152 to DenseNet-121. Moreover, we propose a masked fine-tuning mechanism to further strengthen our method in attacking a single class, which surpasses existing single-target methods.

We present a target-aware video diffusion model that generates videos from an input image in which an actor interacts with a specified target while performing a desired action. The target is defined by a segmentation mask and the desired action is described via a text prompt. Unlike existing controllable image-to-video diffusion models that often rely on dense structural or motion cues to guide the actor's movements toward the target, our target-aware model requires only a simple mask to indicate the target, leveraging the generalization capabilities of pretrained models to produce plausible actions. This makes our method particularly effective for human-object interaction (HOI) scenarios, where providing precise action guidance is challenging, and further enables the use of video diffusion models for high-level action planning in applications such as robotics. We build our target-aware model by extending a baseline model to incorporate the target mask as an additional input. To enforce target awareness, we introduce a special token that encodes the target's spatial information within the text prompt. We then fine-tune the model with our curated dataset using a novel cross-attention loss that aligns the cross-attention maps associated with this token with the input target mask. To further improve performance, we selectively apply this loss to the most semantically relevant transformer blocks and attention regions. Experimental results show that our target-aware model outperforms existing solutions in generating videos where actors interact accurately with the specified targets. We further demonstrate its efficacy in two downstream applications: video content creation and zero-shot 3D HOI motion synthesis.

The generation of transferable adversarial perturbations typically involves training a generator to maximize embedding separation between clean and adversarial images at a single mid-layer of a source model. In this work, we build on this approach and introduce Neuron Attack for Transferability (NAT), a method designed to target specific neuron within the embedding. Our approach is motivated by the observation that previous layer-level optimizations often disproportionately focus on a few neurons representing similar concepts, leaving other neurons within the attacked layer minimally affected. NAT shifts the focus from embedding-level separation to a more fundamental, neuron-specific approach. We find that targeting individual neurons effectively disrupts the core units of the neural network, providing a common basis for transferability across different models. Through extensive experiments on 41 diverse ImageNet models and 9 fine-grained models, NAT achieves fooling rates that surpass existing baselines by over 14\% in cross-model and 4\% in cross-domain settings. Furthermore, by leveraging the complementary attacking capabilities of the trained generators, we achieve impressive fooling rates within just 10 queries. Our code is available at: https://krishnakanthnakka.github.io/NAT/

As Large Language Models (LLMs) are deployed and integrated into thousands of applications, the need for scalable evaluation of how models respond to adversarial attacks grows rapidly. However, LLM security is a moving target: models produce unpredictable output, are constantly updated, and the potential adversary is highly diverse: anyone with access to the internet and a decent command of natural language. Further, what constitutes a security weak in one context may not be an issue in a different context; one-fits-all guardrails remain theoretical. In this paper, we argue that it is time to rethink what constitutes ``LLM security'', and pursue a holistic approach to LLM security evaluation, where exploration and discovery of issues are central. To this end, this paper introduces garak (Generative AI Red-teaming and Assessment Kit), a framework which can be used to discover and identify vulnerabilities in a target LLM or dialog system. garak probes an LLM in a structured fashion to discover potential vulnerabilities. The outputs of the framework describe a target model's weaknesses, contribute to an informed discussion of what composes vulnerabilities in unique contexts, and can inform alignment and policy discussions for LLM deployment.

Our work presents extensive empirical evidence that layer rotation, i.e. the evolution across training of the cosine distance between each layer's weight vector and its initialization, constitutes an impressively consistent indicator of generalization performance. In particular, larger cosine distances between final and initial weights of each layer consistently translate into better generalization performance of the final model. Interestingly, this relation admits a network independent optimum: training procedures during which all layers' weights reach a cosine distance of 1 from their initialization consistently outperform other configurations -by up to 30% test accuracy. Moreover, we show that layer rotations are easily monitored and controlled (helpful for hyperparameter tuning) and potentially provide a unified framework to explain the impact of learning rate tuning, weight decay, learning rate warmups and adaptive gradient methods on generalization and training speed. In an attempt to explain the surprising properties of layer rotation, we show on a 1-layer MLP trained on MNIST that layer rotation correlates with the degree to which features of intermediate layers have been trained.

We propose a new approach for generative modeling based on training a neural network to be idempotent. An idempotent operator is one that can be applied sequentially without changing the result beyond the initial application, namely f(f(z))=f(z). The proposed model f is trained to map a source distribution (e.g, Gaussian noise) to a target distribution (e.g. realistic images) using the following objectives: (1) Instances from the target distribution should map to themselves, namely f(x)=x. We define the target manifold as the set of all instances that f maps to themselves. (2) Instances that form the source distribution should map onto the defined target manifold. This is achieved by optimizing the idempotence term, f(f(z))=f(z) which encourages the range of f(z) to be on the target manifold. Under ideal assumptions such a process provably converges to the target distribution. This strategy results in a model capable of generating an output in one step, maintaining a consistent latent space, while also allowing sequential applications for refinement. Additionally, we find that by processing inputs from both target and source distributions, the model adeptly projects corrupted or modified data back to the target manifold. This work is a first step towards a ``global projector'' that enables projecting any input into a target data distribution.

To ensure AI safety, instruction-tuned Large Language Models (LLMs) are specifically trained to ensure alignment, which refers to making models behave in accordance with human intentions. While these models have demonstrated commendable results on various safety benchmarks, the vulnerability of their safety alignment has not been extensively studied. This is particularly troubling given the potential harm that LLMs can inflict. Existing attack methods on LLMs often rely on poisoned training data or the injection of malicious prompts. These approaches compromise the stealthiness and generalizability of the attacks, making them susceptible to detection. Additionally, these models often demand substantial computational resources for implementation, making them less practical for real-world applications. Inspired by recent success in modifying model behavior through steering vectors without the need for optimization, and drawing on its effectiveness in red-teaming LLMs, we conducted experiments employing activation steering to target four key aspects of LLMs: truthfulness, toxicity, bias, and harmfulness - across a varied set of attack settings. To establish a universal attack strategy applicable to diverse target alignments without depending on manual analysis, we automatically select the intervention layer based on contrastive layer search. Our experiment results show that activation attacks are highly effective and add little or no overhead to attack efficiency. Additionally, we discuss potential countermeasures against such activation attacks. Our code and data are available at https://github.com/wang2226/Backdoor-Activation-Attack Warning: this paper contains content that can be offensive or upsetting.

Vision-language models (VLMs) have improved significantly in multi-modal tasks, but their more complex architecture makes their safety alignment more challenging than the alignment of large language models (LLMs). In this paper, we reveal an unfair distribution of safety across the layers of VLM's vision encoder, with earlier and middle layers being disproportionately vulnerable to malicious inputs compared to the more robust final layers. This 'cross-layer' vulnerability stems from the model's inability to generalize its safety training from the default architectural settings used during training to unseen or out-of-distribution scenarios, leaving certain layers exposed. We conduct a comprehensive analysis by projecting activations from various intermediate layers and demonstrate that these layers are more likely to generate harmful outputs when exposed to malicious inputs. Our experiments with LLaVA-1.5 and Llama 3.2 show discrepancies in attack success rates and toxicity scores across layers, indicating that current safety alignment strategies focused on a single default layer are insufficient.

Deep classifiers are known to be sensitive to data distribution shifts, primarily due to their reliance on spurious correlations in training data. It has been suggested that these classifiers can still find useful features in the network's last layer that hold up under such shifts. In this work, we question the use of last-layer representations for out-of-distribution (OOD) generalisation and explore the utility of intermediate layers. To this end, we introduce Intermediate Layer Classifiers (ILCs). We discover that intermediate layer representations frequently offer substantially better generalisation than those from the penultimate layer. In many cases, zero-shot OOD generalisation using earlier-layer representations approaches the few-shot performance of retraining on penultimate layer representations. This is confirmed across multiple datasets, architectures, and types of distribution shifts. Our analysis suggests that intermediate layers are less sensitive to distribution shifts compared to the penultimate layer. These findings highlight the importance of understanding how information is distributed across network layers and its role in OOD generalisation, while also pointing to the limits of penultimate layer representation utility. Code is available at https://github.com/oshapio/intermediate-layer-generalization

In this paper, we address post-training quantization (PTQ) for large language models (LLMs) from an overlooked perspective: given a pre-trained high-precision LLM, the predominant sequential quantization framework treats different layers equally, but this may be not optimal in challenging bit-width settings. We empirically study the quantization impact of different layers on model accuracy, and observe that: (1) shallow/deep layers are usually more sensitive to quantization than intermediate layers; (2) among shallow/deep layers, the most sensitive one is the first/last layer, which exhibits significantly larger quantization error than others. These empirical observations imply that the quantization design for different layers of LLMs is required on multiple levels instead of a single level shared to all layers. Motivated by this, we propose a new PTQ framework termed Sliding-layer Quantization (SliderQuant) that relies on a simple adaptive sliding quantization concept facilitated by few learnable parameters. The base component of SliderQuant is called inter-layer sliding quantization, which incorporates three types of novel sliding window designs tailored for addressing the varying quantization sensitivity of shallow, intermediate and deep layers. The other component is called intra-layer sliding quantization that leverages an incremental strategy to quantize each window. As a result, SliderQuant has a strong ability to reduce quantization errors across layers. Extensive experiments on basic language generation, zero-shot commonsense reasoning and challenging math and code tasks with various LLMs, including Llama/Llama2/Llama3/Qwen2.5 model families, DeepSeek-R1 distilled models and large MoE models, show that our method outperforms existing PTQ methods (including the latest PTQ methods using rotation transformations) for both weight-only quantization and weight-activation quantization.

Self-supervised geospatial foundation models (GeoFMs) learn transferable representations from remote sensing data, but their downstream behavior is difficult to characterize. We study six representative GeoFMs spanning joint-embedding, reconstruction, and multimodal pretraining families, and evaluate transfer across classification, regression, and segmentation benchmarks under different label availability and downstream pipelines. We find that model rankings change across tasks and adaptation settings. Layerwise probing shows that, in most cases, task-relevant information is more accessible in intermediate transformer blocks compared to final-layer embeddings, and that GeoFMs exhibit distinct depthwise profiles. In segmentation case studies on PASTIS and Sen1Floods11, downstream adaptation settings such as decoder design and fine-tuning can be as impactful as the choice of GeoFM, and standard dense-prediction heads may be poorly aligned with how GeoFMs organize information over depth. Finally, CKA analysis on case studies shows that fine-tuning does not rewrite GeoFMs uniformly across depth, and the strongest changes are localized to the first linear layer of the MLP in ViT blocks. These results help explain why GeoFM rankings shift across benchmarks and motivate more representation-aware evaluation and adaptation strategies.

Multimodal large language models (MLLMs) typically rely on a single late-layer feature from a frozen vision encoder, leaving the encoder's rich hierarchy of visual cues under-utilized. MLLMs still suffer from visually ungrounded hallucinations, often relying on language priors rather than image evidence. While many prior mitigation strategies operate on the text side, they leave the visual representation unchanged and do not exploit the rich hierarchy of features encoded across vision layers. Existing multi-layer fusion methods partially address this limitation but remain static, applying the same layer mixture regardless of the query. In this work, we introduce TGIF (Text-Guided Inter-layer Fusion), a lightweight module that treats encoder layers as depth-wise "experts" and predicts a prompt-dependent fusion of visual features. TGIF follows the principle of direct external fusion, requires no vision-encoder updates, and adds minimal overhead. Integrated into LLaVA-1.5-7B, TGIF provides consistent improvements across hallucination, OCR, and VQA benchmarks, while preserving or improving performance on ScienceQA, GQA, and MMBench. These results suggest that query-conditioned, hierarchy-aware fusion is an effective way to strengthen visual grounding and reduce hallucination in modern MLLMs.

Representation alignment (REPA) guides generative training by distilling representations from a strong, pretrained vision encoder to intermediate diffusion features. We investigate a fundamental question: what aspect of the target representation matters for generation, its global semantic information (e.g., measured by ImageNet-1K accuracy) or its spatial structure (i.e. pairwise cosine similarity between patch tokens)? Prevalent wisdom holds that stronger global semantic performance leads to better generation as a target representation. To study this, we first perform a large-scale empirical analysis across 27 different vision encoders and different model scales. The results are surprising; spatial structure, rather than global performance, drives the generation performance of a target representation. To further study this, we introduce two straightforward modifications, which specifically accentuate the transfer of spatial information. We replace the standard MLP projection layer in REPA with a simple convolution layer and introduce a spatial normalization layer for the external representation. Surprisingly, our simple method (implemented in <4 lines of code), termed iREPA, consistently improves convergence speed of REPA, across a diverse set of vision encoders, model sizes, and training variants (such as REPA, REPA-E, Meanflow, JiT etc). %, etc. Our work motivates revisiting the fundamental working mechanism of representational alignment and how it can be leveraged for improved training of generative models. The code and project page are available at https://end2end-diffusion.github.io/irepa

While LLMs are powerful embedding backbones, their application in training-free settings faces two structural challenges: causal attention restricts early tokens from accessing subsequent context, and the next-token prediction objective biases representations toward generation rather than semantic compression. To address these limitations, we propose KV-Embedding, a framework that activates the latent representation power of frozen LLMs. Our method leverages the observation that the key-value (KV) states of the final token at each layer encode a compressed view of the sequence. By re-routing these states as a prepended prefix, we enable all tokens to access sequence-level context within a single forward pass. To ensure model-agnostic applicability, we introduce an automated layer selection strategy based on intrinsic dimensionality. Evaluations on MTEB across Qwen, Mistral, and Llama backbones show that KV-Embedding outperforms existing training-free baselines by up to 10%, while maintaining robust performance on sequences up to 4,096 tokens. These results demonstrate that internal state manipulation offers an efficient alternative to input modification, and we hope this work encourages further exploration of LLM internals for representation learning.

We present LayerFlow, a unified solution for layer-aware video generation. Given per-layer prompts, LayerFlow generates videos for the transparent foreground, clean background, and blended scene. It also supports versatile variants like decomposing a blended video or generating the background for the given foreground and vice versa. Starting from a text-to-video diffusion transformer, we organize the videos for different layers as sub-clips, and leverage layer embeddings to distinguish each clip and the corresponding layer-wise prompts. In this way, we seamlessly support the aforementioned variants in one unified framework. For the lack of high-quality layer-wise training videos, we design a multi-stage training strategy to accommodate static images with high-quality layer annotations. Specifically, we first train the model with low-quality video data. Then, we tune a motion LoRA to make the model compatible with static frames. Afterward, we train the content LoRA on the mixture of image data with high-quality layered images along with copy-pasted video data. During inference, we remove the motion LoRA thus generating smooth videos with desired layers.

Transformers are mostly relying on softmax attention, which introduces quadratic complexity with respect to sequence length and remains a major bottleneck for efficient inference. Prior work on linear or hybrid attention typically replaces softmax attention uniformly across all layers, often leading to significant performance degradation or requiring extensive retraining to recover model quality. This work proposes LayerBoost, a layer-aware attention reduction method that selectively modifies the attention mechanism based on the sensitivity of individual transformer layers. It first performs a systematic sensitivity analysis on a pretrained model to identify layers that are critical for maintaining performance. Guided by this analysis, three distinct strategies can be applied: retaining standard softmax attention in highly sensitive layers, replacing it with linear sliding window attention in moderately sensitive layers, and removing attention entirely in layers that exhibit low sensitivity. To recover performance after these architectural modifications, we introduce a lightweight distillation-based healing phase requiring only 10M additional training tokens. LayerBoost reduces inference latency and improves throughput by up to 68% at high concurrency, while maintaining competitive model quality. It matches base model performance on several benchmarks, exhibits only minor degradations on others, and significantly outperforms state-of-the-art attention linearization methods. These efficiency gains make our method particularly well-suited for high-concurrency serving and hardware-constrained deployment scenarios, where inference cost and memory footprint are critical bottlenecks.

We propose LayerSync, a domain-agnostic approach for improving the generation quality and the training efficiency of diffusion models. Prior studies have highlighted the connection between the quality of generation and the representations learned by diffusion models, showing that external guidance on model intermediate representations accelerates training. We reconceptualize this paradigm by regularizing diffusion models with their own intermediate representations. Building on the observation that representation quality varies across diffusion model layers, we show that the most semantically rich representations can act as an intrinsic guidance for weaker ones, reducing the need for external supervision. Our approach, LayerSync, is a self-sufficient, plug-and-play regularizer term with no overhead on diffusion model training and generalizes beyond the visual domain to other modalities. LayerSync requires no pretrained models nor additional data. We extensively evaluate the method on image generation and demonstrate its applicability to other domains such as audio, video, and motion generation. We show that it consistently improves the generation quality and the training efficiency. For example, we speed up the training of flow-based transformer by over 8.75x on ImageNet dataset and improved the generation quality by 23.6%. The code is available at https://github.com/vita-epfl/LayerSync.

The general domain of video segmentation is currently fragmented into different tasks spanning multiple benchmarks. Despite rapid progress in the state-of-the-art, current methods are overwhelmingly task-specific and cannot conceptually generalize to other tasks. Inspired by recent approaches with multi-task capability, we propose TarViS: a novel, unified network architecture that can be applied to any task that requires segmenting a set of arbitrarily defined 'targets' in video. Our approach is flexible with respect to how tasks define these targets, since it models the latter as abstract 'queries' which are then used to predict pixel-precise target masks. A single TarViS model can be trained jointly on a collection of datasets spanning different tasks, and can hot-swap between tasks during inference without any task-specific retraining. To demonstrate its effectiveness, we apply TarViS to four different tasks, namely Video Instance Segmentation (VIS), Video Panoptic Segmentation (VPS), Video Object Segmentation (VOS) and Point Exemplar-guided Tracking (PET). Our unified, jointly trained model achieves state-of-the-art performance on 5/7 benchmarks spanning these four tasks, and competitive performance on the remaining two. Code and model weights are available at: https://github.com/Ali2500/TarViS