Daily Papers

Medical imaging is limited by acquisition time and scanning equipment. CT and MR volumes, reconstructed with thicker slices, are anisotropic with high in-plane resolution and low through-plane resolution. We reveal an intriguing phenomenon that due to the mentioned nature of data, performing slice-wise interpolation from the axial view can yield greater benefits than performing super-resolution from other views. Based on this observation, we propose an Inter-Intra-slice Interpolation Network (I^3Net), which fully explores information from high in-plane resolution and compensates for low through-plane resolution. The through-plane branch supplements the limited information contained in low through-plane resolution from high in-plane resolution and enables continual and diverse feature learning. In-plane branch transforms features to the frequency domain and enforces an equal learning opportunity for all frequency bands in a global context learning paradigm. We further propose a cross-view block to take advantage of the information from all three views online. Extensive experiments on two public datasets demonstrate the effectiveness of I^3Net, and noticeably outperforms state-of-the-art super-resolution, video frame interpolation and slice interpolation methods by a large margin. We achieve 43.90dB in PSNR, with at least 1.14dB improvement under the upscale factor of times2 on MSD dataset with faster inference. Code is available at https://github.com/DeepMed-Lab-ECNU/Medical-Image-Reconstruction.

We present RopStitch, an unsupervised deep image stitching framework with both robustness and naturalness. To ensure the robustness of RopStitch, we propose to incorporate the universal prior of content perception into the image stitching model by a dual-branch architecture. It separately captures coarse and fine features and integrates them to achieve highly generalizable performance across diverse unseen real-world scenes. Concretely, the dual-branch model consists of a pretrained branch to capture semantically invariant representations and a learnable branch to extract fine-grained discriminative features, which are then merged into a whole by a controllable factor at the correlation level. Besides, considering that content alignment and structural preservation are often contradictory to each other, we propose a concept of virtual optimal planes to relieve this conflict. To this end, we model this problem as a process of estimating homography decomposition coefficients, and design an iterative coefficient predictor and minimal semantic distortion constraint to identify the optimal plane. This scheme is finally incorporated into RopStitch by warping both views onto the optimal plane bidirectionally. Extensive experiments across various datasets demonstrate that RopStitch significantly outperforms existing methods, particularly in scene robustness and content naturalness. The code is available at {redhttps://github.com/MmelodYy/RopStitch}.

Self-supervised pretraining is central to 3D medical image analysis, where unlabeled CT volumes are abundant but expert annotations are scarce. Yet existing volumetric encoders often fail to preserve the coarse spatial and geometric structure that downstream reasoning depends on, limiting their performance on organ disentanglement, abnormality detection, and spatial understanding when paired with language models. We introduce Rad-JEPA 3D, a joint-embedding predictive framework that learns volumetric CT representations by predicting the latent features of a complete scan from a masked view. At its core is a hybrid H-Mamba encoder that fuses a Mamba state-space branch, which models inter-slice continuity through sequential scanning, with a grouped-query attention branch, which captures cross-plane spatial context, combined through a lightweight per-token router. To improve the quality of intermediate representations, we further propose Hidden States Orthogonal Regularization (HSOR), which aligns student-teacher hidden states and reduces feature redundancy throughout the encoder. This layer-wise regularization produces more consistent and discriminative volumetric representations, leading to improved performance on organ recognition and spatial reasoning tasks. Pretrained on approximately 120,000 CT scans, Rad-JEPA 3D attains state-of-the-art results despite its compact size: with only 4.0B total parameters, it achieves competitive results with state-of-the-art on closed-ended VQA and the best average spatial-reasoning score on the Spatial-Med benchmark. Ablation studies confirm that the hybrid block and HSOR contribute complementary gains, and that the induced spatial structure can substitute for raw language-model scale on volumetric reasoning tasks.

Practical video editing is not only pixel generation: an editor must turn a brief, a clip pool, music metadata, and hard constraints into an executable timeline. We study this decision layer as executable video-editing planning and introduce RefineCut, which, unlike workflow systems that wrap a prompted frontier model, trains a compact open-weight planner for it. The planner edits a typed timeline through structured patches covering clip selection, trimming, ordering, transitions, and duration and music alignment; a deterministic verifier applies each patch and checks it against an explicit constraint ledger. Because editing has no single ground-truth repair, we do not imitate teachers directly: RefineCut replays every multi-teacher branch through the verifier and keeps verifier-best repairs as supervision. A second stage, RefineCut-Evo, lets the student score its own repairs with the verifier and a task rubric and trains on high-margin preference pairs, so the final 8B planner runs in a closed verifier loop with no teacher calls at inference. On RefineCut-Bench (3{,}578 tasks, 7{,}971 captioned clips, 499 music tracks, explicit ledgers), verifier-replayed distillation lifts the planner from 0.620 to 0.858 on the protocol-specific Video-Editing Score and RefineCut-Evo reaches 0.924; the gain transfers to Llama-3.1-8B and GLM-4-9B, and in the same closed loop the 8B planner matches or exceeds its frontier teachers. Code and RefineCut-Bench are publicly released; see the Data Availability statement.

Mu3e is an experiment currently under construction at the Paul Scherrer Institute in Switzerland, designed to search for the Lepton Flavor Violating (LFV) decay mu^+ rightarrow e^+e^-e^+. In extensions of the Standard Model (SM) that account for neutrino masses, this decay is theoretically allowed but occurs only through extremely rare loop processes, with a predicted branching ratio of approximately O(10^{-54}). Such a small probability implies that any observation of this decay would provide clear evidence for physics beyond the SM. The Mu3e experiment aims to probe the mu^+ rightarrow e^+e^-e^+ decay with a sensitivity of approximately O(10^{-15}) in its Phase-1 and plans to achieve a sensitivity of O(10^{-16}) after future upgrades. To reach its Phase-1 ambitious goals, Mu3e is going to use the most intense continuous muon beam in the world, generating 10^{8} muon stops per second in the target placed at the center of the Mu3e. Mu3e will use three main technologies for particle detection. The tracking will done through ultra-thin (50 - 70 mu m) pixel detectors based on MuPix11 sensors. These are high-voltage monolithic active pixel sensors (HV-MAPS) with a sim 23~mum spatial resolution. The timing will be done through scintillating fibres (sim 250 ps) and tiles (sim 40 ps), coupled to silicon photomultipliers and read out by MuTRiG3 ASICs. A triggerless DAQ system based on FPGAs will collect data from the detectors, which will then undergo reconstruction in a GPU filter farm. The assembly of the detectors has started, with a detector commissioning beam time planned for 2025. This document reports on the status of the construction, installation, and data-taking plans for the near future.

Latent communication passes internal states between language models instead of decoded text, but higher receiver accuracy does not show that the receiver used the message content. Across five method-dataset pairs, replacing each message with one from an unrelated question changes accuracy by at most 0.60 points, even when communication adds 15.44 points over the receiver alone. Thus the interface can supply the gain while making the sharer dispensable. Draft-KV instead sends the key-value states formed while the sharer drafts an answer to the current question. Linear projections place these states in a side memory read through a gated attention branch, and progressive training moves from message reconstruction to answer supervision under a guard on harm from mismatched messages. Both models remain frozen and the interface trains 1.05M parameters, 348x fewer than C2C. With a Qwen3-8B sharer, a frozen Qwen2.5-0.5B-Instruct receiver reaches 78.04% on MMLU-Redux, versus 37.45% alone and 36.40% with reassigned messages. At fixed interface size, scaling the sharer from 0.6B to 8B raises accuracy from 46.11% to 78.04%; communication also transfers to held-out tasks and can exceed both models when each holds different evidence.

Feed-forward 3D Gaussian Splatting (3DGS) has shown great promise for real-time novel view synthesis, but its application to panoramic imagery remains challenging. Existing methods often rely on multi-view cost volumes for geometric refinement, which struggle to resolve occlusions in sparse-view scenarios. Furthermore, standard volumetric representations like Cartesian Triplanes are poor in capturing the inherent geometry of 360^circ scenes, leading to distortion and aliasing. In this work, we introduce CylinderSplat, a feed-forward framework for panoramic 3DGS that addresses these limitations. The core of our method is a new {cylindrical Triplane} representation, which is better aligned with panoramic data and real-world structures adhering to the Manhattan-world assumption. We use a dual-branch architecture: a pixel-based branch reconstructs well-observed regions, while a volume-based branch leverages the cylindrical Triplane to complete occluded or sparsely-viewed areas. Our framework is designed to flexibly handle a variable number of input views, from single to multiple panoramas. Extensive experiments demonstrate that CylinderSplat achieves state-of-the-art results in both single-view and multi-view panoramic novel view synthesis, outperforming previous methods in both reconstruction quality and geometric accuracy.

Single-image piece-wise planar 3D reconstruction aims to simultaneously segment plane instances and recover 3D plane parameters from an image. Most recent approaches leverage convolutional neural networks (CNNs) and achieve promising results. However, these methods are limited to detecting a fixed number of planes with certain learned order. To tackle this problem, we propose a novel two-stage method based on associative embedding, inspired by its recent success in instance segmentation. In the first stage, we train a CNN to map each pixel to an embedding space where pixels from the same plane instance have similar embeddings. Then, the plane instances are obtained by grouping the embedding vectors in planar regions via an efficient mean shift clustering algorithm. In the second stage, we estimate the parameter for each plane instance by considering both pixel-level and instance-level consistencies. With the proposed method, we are able to detect an arbitrary number of planes. Extensive experiments on public datasets validate the effectiveness and efficiency of our method. Furthermore, our method runs at 30 fps at the testing time, thus could facilitate many real-time applications such as visual SLAM and human-robot interaction. Code is available at https://github.com/svip-lab/PlanarReconstruction.

We construct nets of curves in a rectangle R with special properties. The net is formed by two families of curves, "horizontal" and "vertical", each family foliates R, and every horizontal curve meets every vertical curve orthogonally. Moreover, every horizontal curve started at the left edge of R arrives to the right edge of R at the same height, and every vertical curve started at the bottom edge of R arrives to the top edge of R at a prescribed in advance longitude. The latter longitude function as a map from bottom to top can be chosen in advance as any small perturbation of the identity. Our motivation for this was to design some elliptic divergence form operators, for instance on one of the domains bounded by a Reifenberg flat curve in the plane, with the scalar coefficient and the corresponding elliptic measure being absolutely continuous with respect to the natural measure on the boundary (an object of a separate paper). The construction of our net of curves in a rectangle can also be interpreted as control problem, has an interest on its own, and, likely, has other applications.

Machine-learning surrogate models have shown promise in accelerating aerodynamic design, yet progress toward generalizable predictors for three-dimensional wings has been limited by the scarcity and restricted diversity of existing datasets. Here, we present SuperWing, a comprehensive open dataset of transonic swept-wing aerodynamics comprising 4,239 parameterized wing geometries and 28,856 Reynolds-averaged Navier-Stokes flow field solutions. The wing shapes in the dataset are generated using a simplified yet expressive geometry parameterization that incorporates spanwise variations in airfoil shape, twist, and dihedral, allowing for an enhanced diversity without relying on perturbations of a baseline wing. All shapes are simulated under a broad range of Mach numbers and angles of attack covering the typical flight envelope. To demonstrate the dataset's utility, we benchmark two state-of-the-art Transformers that accurately predict surface flow and achieve a 2.5 drag-count error on held-out samples. Models pretrained on SuperWing further exhibit strong zero-shot generalization to complex benchmark wings such as DLR-F6 and NASA CRM, underscoring the dataset's diversity and potential for practical usage.