Daily Papers

Local decoding usually fixes one weight precision for the whole generation. We study a different allocation: store 8-bit weights, decode with their top 4 bits, and redo a step at 8 bits only when the low-precision output distribution looks uncertain (entropy above a threshold or a small top-two margin). Quantization is simulated, the model is Qwen3-0.6B, and the benchmark is GSM8K. Cost is counted in weight bytes read per token. On 36724 replayed steps the entropy of the low pass ranks argmax flips with AUC 0.93. At a 15% escalation budget it catches 78% of flips and the margin gate 94%, against the 15% expected for a random gate of equal rate (a computed expectation, not a run). In 150 live problems all-high scores 64.0% and all-low 55.3% (McNemar p=0.053). An entropy gate with a 16% escalation rate scores 62.7% at 0.87 of the all-high weight bytes. Its paired difference is -1.3 (-8.0 to +5.3) points to all-high and +7.3 (+0.0 to +14.7) points to all-low (p=0.080), so the live data do not separate the gate from either end. Verified speculation reaches zero KL at similar bytes in the same cost model. A live random control, a thinking-mode phase rule, a second model and live KL were not run.

The optimal bit-width for achieving the best trade-off between quantized model size and accuracy has been a subject of ongoing debate. While some advocate for 4-bit quantization, others propose that 1.58-bit offers superior results. However, the lack of a cohesive framework for different bits has left such conclusions relatively tenuous. We present ParetoQ, the first unified framework that facilitates rigorous comparisons across 1-bit, 1.58-bit, 2-bit, 3-bit, and 4-bit quantization settings. Our findings reveal a notable learning transition between 2 and 3 bits: For 3-bits and above, the fine-tuned models stay close to their original pre-trained distributions, whereas for learning 2-bit networks or below, the representations change drastically. By optimizing training schemes and refining quantization functions, ParetoQ surpasses all previous methods tailored to specific bit widths. Remarkably, our ParetoQ ternary 600M-parameter model even outperforms the previous SoTA ternary 3B-parameter model in accuracy, using only one-fifth of the parameters. Extensive experimentation shows that ternary, 2-bit, and 3-bit quantization maintains comparable performance in the size-accuracy trade-off and generally exceeds 4-bit and binary quantization. Considering hardware constraints, 2-bit quantization offers promising potential for memory reduction and speedup.

NVFP4 has grown increasingly popular as a 4-bit format for quantizing large language models due to its hardware support and its ability to retain useful information with relatively few bits per parameter. However, the format is not without limitations: recent work has shown that NVFP4 suffers from its error distribution, resulting in large amounts of quantization error on near-maximal values in each group of 16 values. In this work, we leverage this insight to design new Adaptive Block-Scaled Data Types that can adapt to the distribution of their input values. For four-bit quantization, our proposed IF4 (Int/Float 4) data type selects between FP4 and INT4 representations for each group of 16 values, which are then scaled by an E4M3 scale factor as is done with NVFP4. The selected data type is denoted using the scale factor's sign bit, which is currently unused in NVFP4, and we apply the same insight to design formats for other bit-widths, including IF3 and IF6. When used to quantize language models, we find that IF4 outperforms existing 4-bit block-scaled formats, achieving lower loss during quantized training and achieving higher accuracy on many tasks in post-training quantization. We additionally design and evaluate an IF4 Multiply-Accumulate (MAC) unit to demonstrate that IF4 can be implemented efficiently in next-generation hardware accelerators. Our code is available at https://github.com/mit-han-lab/fouroversix.

Quantization methods reduce the number of bits required to represent each parameter in a model, trading accuracy for smaller memory footprints and inference latencies. However, the final model size depends on both the number of parameters of the original model and the rate of compression. For example, a 30B 8-bit model and a 60B 4-bit model have the same number of bits but may have very different zero-shot accuracies. In this work, we study this trade-off by developing inference scaling laws of zero-shot performance in Large Language Models (LLMs) to determine the bit-precision and model size that maximizes zero-shot performance. We run more than 35,000 experiments with 16-bit inputs and k-bit parameters to examine which zero-shot quantization methods improve scaling for 3 to 8-bit precision at scales of 19M to 176B parameters across the LLM families BLOOM, OPT, NeoX/Pythia, and GPT-2. We find that it is challenging to improve the bit-level scaling trade-off, with the only improvements being the use of a small block size -- splitting the parameters into small independently quantized blocks -- and the quantization data type being used (e.g., Int vs Float). Overall, our findings show that {4-bit} precision is almost universally optimal for total model bits and zero-shot accuracy.

We quantify the upper bound on the size of the implicit neural representation (INR) model from a digital perspective. The upper bound of the model size increases exponentially as the required bit-precision increases. To this end, we present a bit-plane decomposition method that makes INR predict bit-planes, producing the same effect as reducing the upper bound of the model size. We validate our hypothesis that reducing the upper bound leads to faster convergence with constant model size. Our method achieves lossless representation in 2D image and audio fitting, even for high bit-depth signals, such as 16-bit, which was previously unachievable. We pioneered the presence of bit bias, which INR prioritizes as the most significant bit (MSB). We expand the application of the INR task to bit depth expansion, lossless image compression, and extreme network quantization. Our source code is available at https://github.com/WooKyoungHan/LosslessINR

Post-training quantization (PTQ) compresses the weights of a trained model with limited compute and data. Down to 4 bits it is near-lossless, but at 2 bits scalar PTQ configurations fall to chance-level accuracy. We study three choices usually treated as implementation details that matter little at 4 bits but decide 2-bit quality: the quantization representation, the calibration data, and the recovery fine-tuning data, across six dense and mixture-of experts models (ranging from 3.8 to 32B parameters). Representation is the largest factor and vector codebooks restore usable models where scalar PTQ pipelines collapse. Most of the remaining loss in accuracy is on generative tasks, and the amount of performance drop is model-dependent. Furthermore, at a short recovery budget, calibration and recovery data are coupled. The best recovery data depends on the calibration data, so the two must be chosen jointly. The resulting recipe involves a vector codebook representation, a small task-aligned calibration mixture, and an inexpensive codebook-only recovery stage. Including codebooks, it uses about 2.3 effective bits per weight and retains 89 to 97% of full-precision question-answering (QA) accuracy where scalar PTQ is at chance, and, including recovery, uses 1.4 to 30times less compute than the strongest quantization-aware-training (QAT) baseline.

Recent research on the 1-bit Large Language Models (LLMs), such as BitNet b1.58, presents a promising direction for reducing the inference cost of LLMs while maintaining their performance. In this work, we introduce BitNet a4.8, enabling 4-bit activations for 1-bit LLMs. BitNet a4.8 employs a hybrid quantization and sparsification strategy to mitigate the quantization errors introduced by the outlier channels. Specifically, we utilize 4-bit activations for inputs to the attention and feed-forward network layers, while sparsifying intermediate states followed with 8-bit quantization. Extensive experiments demonstrate that BitNet a4.8 achieves performance comparable to BitNet b1.58 with equivalent training costs, while being faster in inference with enabling 4-bit (INT4/FP4) kernels. Additionally, BitNet a4.8 activates only 55% of parameters and supports 3-bit KV cache, further enhancing the efficiency of large-scale LLM deployment and inference.

Transfer of pre-trained representations improves sample efficiency and simplifies hyperparameter tuning when training deep neural networks for vision. We revisit the paradigm of pre-training on large supervised datasets and fine-tuning the model on a target task. We scale up pre-training, and propose a simple recipe that we call Big Transfer (BiT). By combining a few carefully selected components, and transferring using a simple heuristic, we achieve strong performance on over 20 datasets. BiT performs well across a surprisingly wide range of data regimes -- from 1 example per class to 1M total examples. BiT achieves 87.5% top-1 accuracy on ILSVRC-2012, 99.4% on CIFAR-10, and 76.3% on the 19 task Visual Task Adaptation Benchmark (VTAB). On small datasets, BiT attains 76.8% on ILSVRC-2012 with 10 examples per class, and 97.0% on CIFAR-10 with 10 examples per class. We conduct detailed analysis of the main components that lead to high transfer performance.

When agentic sessions run to a million tokens with many sessions resident at once, the KV cache and the index that ranks it live in host memory, and the scan that ranks all n keys for a top-k step becomes the traffic that bounds decoding. We present Fathom, a key scan in which each query decides how many bits of each key channel to read. The 4-bit K cache is stored channel-major as bit planes, so a prefix of t planes is exactly the channel's t-bit quantizer, and the query spends its bit budget by reverse water-filling over the variance-weighted importance of its channels. At one million tokens on Qwen3-8B a decode step is 1.67x faster in GPU time than with the 136-bit scans of Double Sparsity, Loki and SparQ r=32, and in the same GPU time as SparQ's 68-bit read (r=16) Fathom reads 18% fewer bytes with lower attention error on six of seven model and context settings. On RULER-style tasks every per-token scan matches exact top-k decoding, and on real coding-agent sessions Fathom reaches the step agreement of the most accurate 136-bit scan at 92 bits. The store is the 4-bit K copy a quantized serving stack already holds, and the method is not faster when the index is resident in GPU memory.

Leech-lattice quantization gives good quality at two bits per weight, but its codebooks hold more than 10^14 points, too many for a lookup table. Our earlier kernel expanded the codes at load time and read 4.804 bits per weight from GPU memory for 2 bits of code. We present Tetra, a new codebook on the same lattice. A 24-weight block still takes 48 bits, most of which index a 64-state trellis of the Golay code and one shared 16 KiB table. The kernel decodes a block with six table loads and two small lookups inside the matrix-vector product, and reads 2.148 bits per weight. For full models, we retrain one scale per matrix row, store the matrices that lose the most as 4-bit integers, and pay for them with 4-bit embedding tables. Our Qwen3-4B, 8B and 14B files hold 2.73, 2.70 and 2.73 bits per parameter over the whole model. They score 63.37, 69.58 and 75.66 on the full MMLU test set, 4.76, 4.21 and 2.46 points below 4-bit AWQ at 5.3 to 6.0 bits per parameter. They generate 113.8, 95.0 and 57.2 tokens per second in our engine. On GSM8K, through the served kernel, they lose 9.63, 4.62 and 3.26 points to FP16. At 4B our file scores 23.6 points above llama.cpp's IQ2_XXS (2.48 bits per parameter). Every number we measured for a table or figure comes from one NVIDIA L40S GPU. We preregistered the main experiments.

Optimizer states are a major source of memory consumption for training neural networks, limiting the maximum trainable model within given memory budget. Compressing the optimizer states from 32-bit floating points to lower bitwidth is promising to reduce the training memory footprint, while the current lowest achievable bitwidth is 8-bit. In this work, we push optimizer states bitwidth down to 4-bit through a detailed empirical analysis of first and second moments. Specifically, we find that moments have complicated outlier patterns, that current block-wise quantization cannot accurately approximate. We use a smaller block size and propose to utilize both row-wise and column-wise information for better quantization. We further identify a zero point problem of quantizing the second moment, and solve this problem with a linear quantizer that excludes the zero point. Our 4-bit optimizers are evaluated on a wide variety of benchmarks including natural language understanding, machine translation, image classification, and instruction tuning. On all the tasks our optimizers can achieve comparable accuracy with their full-precision counterparts, while enjoying better memory efficiency.

Post-training quantization (PTQ) has emerged as a practical approach to compress large neural networks, making them highly efficient for deployment. However, effectively reducing these models to their low-bit counterparts without compromising the original accuracy remains a key challenge. In this paper, we propose an innovative PTQ algorithm termed COMQ, which sequentially conducts coordinate-wise minimization of the layer-wise reconstruction errors. We consider the widely used integer quantization, where every quantized weight can be decomposed into a shared floating-point scalar and an integer bit-code. Within a fixed layer, COMQ treats all the scaling factor(s) and bit-codes as the variables of the reconstruction error. Every iteration improves this error along a single coordinate while keeping all other variables constant. COMQ is easy to use and requires no hyper-parameter tuning. It instead involves only dot products and rounding operations. We update these variables in a carefully designed greedy order, significantly enhancing the accuracy. COMQ achieves remarkable results in quantizing 4-bit Vision Transformers, with a negligible loss of less than 1% in Top-1 accuracy. In 4-bit INT quantization of convolutional neural networks, COMQ maintains near-lossless accuracy with a minimal drop of merely 0.3% in Top-1 accuracy.

Large-scale language models (LLMs) excel in language processing tasks but face deployment challenges due to high memory and computational demands. While low-bit quantization, such as 4-bit techniques, offers a potential solution, these methods often suffer from significant accuracy loss or require considerable effort for implementation such as reordering, rotation, etc. To address these challenges, we propose QRazor, a simple yet effective quantization scheme that enables 4-bit quantization of weights, activations, and KV cache in transformer-based LLMs. QRazor operates in two stages: first, quantizing data using 8 or 16-bit integers as a basis with absolute max scaling to preserve accuracy close to full-precision models, and second, compressing the quantized data to 4-bit using our significant data razoring (SDR) technique, which retains only the four most salient bits. Without any additional requirment of fine-tuning or additional training, QRazor achieves performance similar or better compared to state-of-the-art in 4-bit quantization method, surpassing Smoothquant and QLLM by over 12 points and Quarot(RTN) by more than 2.9 points in zero-shot reasoning task accuracy on the LLaMA2-7B model. Additionally, we introduce an integer-based arithmetic unit optimized for QRazor, allowing direct low-precision operations on SDR data without decompression.

This study examines 4-bit quantization methods like GPTQ in large language models (LLMs), highlighting GPTQ's overfitting and limited enhancement in Zero-Shot tasks. While prior works merely focusing on zero-shot measurement, we extend task scope to more generative categories such as code generation and abstractive summarization, in which we found that INT4 quantization can significantly underperform. However, simply shifting to higher precision formats like FP6 has been particularly challenging, thus overlooked, due to poor performance caused by the lack of sophisticated integration and system acceleration strategies on current AI hardware. Our results show that FP6, even with a coarse-grain quantization scheme, performs robustly across various algorithms and tasks, demonstrating its superiority in accuracy and versatility. Notably, with the FP6 quantization, \codestar-15B model performs comparably to its FP16 counterpart in code generation, and for smaller models like the 406M it closely matches their baselines in summarization. Neither can be achieved by INT4. To better accommodate various AI hardware and achieve the best system performance, we propose a novel 4+2 design for FP6 to achieve similar latency to the state-of-the-art INT4 fine-grain quantization. With our design, FP6 can become a promising solution to the current 4-bit quantization methods used in LLMs.

Recent advances in 1-bit Large Language Models (LLMs), such as BitNet and BitNet b1.58, present a promising approach to enhancing the efficiency of LLMs in terms of speed and energy consumption. These developments also enable local LLM deployment across a broad range of devices. In this work, we introduce bitnet.cpp, a tailored software stack designed to unlock the full potential of 1-bit LLMs. Specifically, we develop a set of kernels to support fast and lossless inference of ternary BitNet b1.58 LLMs on CPUs. Extensive experiments demonstrate that bitnet.cpp achieves significant speedups, ranging from 2.37x to 6.17x on x86 CPUs and from 1.37x to 5.07x on ARM CPUs, across various model sizes. The code is available at https://github.com/microsoft/BitNet.

Local language models can save memory by storing weights in fewer bits, and they can reduce sensitivity to the order of answer options by averaging a few reorderings. We ask whether the first makes the second worse, and which is the cheaper way to spend a fixed budget. On Qwen3-0.6B and Qwen3-1.7B with simulated round-to-nearest weight quantization (8, 6, 4 and 3 bits, fp16 reference), read from the logits of the letters A to D on ARC-Easy, ARC-Challenge, MMLU and HellaSwag (300 items each), 6 bits lose no accuracy against fp16 (they score +1.8 (+1.0 to +2.5) and +0.9 (+0.3 to +1.5) points higher, which we do not explain), and 8 bits change it by -0.7 (-1.1 to -0.3) and -0.4 (-0.7 to -0.2) points. At 4 bits the answer-slot skew rises from 0.15 to 0.53 (0.6B) and from 0.07 to 0.12 (1.7B); Gaussian noise at the same weight SNR gives 0.15 and 0.37 (two draws) and 0.19 (one draw), so the control is inconclusive on whether rounding adds slot skew beyond equal-power noise. Flip rates rise but stay below an accuracy-matched baseline of independent uniform errors. Averaging four cyclic orders recovers +12.6 points at 4 bits for 0.6B (+5.3 at fp16). We price bits and passes in one machine-independent unit, weight bytes read times passes. In cost-matched pairs, extra orders beat extra bits only when the weights have 6 or more bits, and the decision table reduces to: use 6-bit weights and spend the rest of the budget on up to four orders, one pass each. Everything is simulated on two small models with the simplest quantizer; a title-level search found no earlier study of quantization together with option order.

We present a simple meta quantization approach that quantizes different layers of a large language model (LLM) at different bit levels, and is independent of the underlying quantization technique. Specifically, we quantize the most important layers to higher bit precision and less important layers to lower bits. We propose two effective strategies to measure the importance of layers within LLMs: the first measures the importance of a layer based on how different its output embeddings are from the input embeddings (higher is better); the second estimates the importance of a layer using the number of layer weights that are much larger than average (smaller is better). We show that quantizing different layers at varying bits according to our importance scores results in minimal performance drop with a far more compressed model size. Finally, we present several practical key takeaways from our variable layer-wise quantization experiments: (a) LLM performance under variable quantization remains close to the original model until 25-50% of layers are moved in lower quantization using our proposed ordering but only until 5-10% if moved using no specific ordering; (b) Adding layer importance to inherently dynamic quantization techniques can further improve their performance, showing that our approach is complementary to other dynamic quantization methods; (c) Quantizing LLMs to lower bits performs substantially better than pruning unless extreme quantization (2-bit) is used; and (d) Layer-wise quantization to lower bits works better in the case of larger LLMs with more layers compared to smaller LLMs with fewer layers. Our code is publicly available at https://github.com/RazvanDu/LayerwiseQuant/.

Recent research, such as BitNet, is paving the way for a new era of 1-bit Large Language Models (LLMs). In this work, we introduce a 1-bit LLM variant, namely BitNet b1.58, in which every single parameter (or weight) of the LLM is ternary {-1, 0, 1}. It matches the full-precision (i.e., FP16 or BF16) Transformer LLM with the same model size and training tokens in terms of both perplexity and end-task performance, while being significantly more cost-effective in terms of latency, memory, throughput, and energy consumption. More profoundly, the 1.58-bit LLM defines a new scaling law and recipe for training new generations of LLMs that are both high-performance and cost-effective. Furthermore, it enables a new computation paradigm and opens the door for designing specific hardware optimized for 1-bit LLMs.

The advent of 1-bit large language models (LLMs), led by BitNet b1.58, has spurred interest in ternary LLMs. Despite this, research and practical applications focusing on efficient edge inference for ternary LLMs remain scarce. To bridge this gap, we introduce Bitnet.cpp, an inference system optimized for BitNet b1.58 and ternary LLMs. Given that mixed-precision matrix multiplication (mpGEMM) constitutes the bulk of inference time in ternary LLMs, Bitnet.cpp incorporates a novel mpGEMM library to facilitate sub-2-bits-per-weight, efficient and lossless inference. The library features two core solutions: Ternary Lookup Table (TL), which addresses spatial inefficiencies of previous bit-wise methods, and Int2 with a Scale (I2_S), which ensures lossless edge inference, both enabling high-speed inference. Our experiments show that Bitnet.cpp achieves up to a 6.25x increase in speed over full-precision baselines and up to 2.32x over low-bit baselines, setting new benchmarks in the field. Additionally, we expand TL to element-wise lookup table (ELUT) for low-bit LLMs in the appendix, presenting both theoretical and empirical evidence of its considerable potential. Bitnet.cpp is publicly available at https://github.com/microsoft/BitNet/tree/paper , offering a sophisticated solution for the efficient and practical deployment of edge LLMs.