Daily Papers

Block-diffusion drafters have recently emerged as a powerful alternative for speculative decoding by predicting multiple future-token distributions in a single parallel step. However, since these parallel predictions are sampled from position-wise marginals rather than fully conditioned sequences, committing to a single greedy path often fails to capture the target model's preferred trajectory. To address this, we propose BASTION, a budget-aware speculative decoding framework with tree-based diffusion drafting. Unlike existing methods that rely on static tree topologies, BASTION dynamically constructs query-dependent trees by balancing draft quality against hardware constraints. Our framework integrates three synergistic components: (1) an acceptance surrogate that estimates expected accepted length via path confidence, (2) an online latency estimator that calibrates a hardware-aware roofline model, and (3) an adaptive best-first expansion that grows the tree until marginal gains no longer justify incremental verification costs. BASTION is training-free, preserves the target model's distribution, and requires no per-setting tuning. Across diverse benchmarks and GPU architectures, BASTION achieves up to a 6.61times speedup over standard autoregressive decoding, outperforming state-of-the-art block-diffusion baselines by 39%.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Speculative decoding losslessly accelerates autoregressive language models by verifying multiple draft tokens in parallel. Diffusion-based drafters further reduce proposal latency by predicting an entire token block in parallel, but their position-wise distributions are marginal rather than conditioned on tokens selected along each draft path. Existing recurrent correction incorporates causal information along a single draft chain, whereas diffusion-based tree construction broadens candidate coverage without carrying this correction along individual branches. We introduce DARTree, a training-free speculative decoding method that extends a pretrained AR correction head from chains to trees. DARTree first constructs a fixed-width candidate tree by expanding and scoring all nodes at each depth in a single batch, and then only applies best-first pruning to select the verification tree, decoupling AR-head inference from sequential heap operations. Across seven math, code, and chat benchmarks, DARTree achieves the highest average acceptance length and speedup in all four model--temperature configurations, accepting up to 12.97 tokens per verification round, 98.6\% more than DFlash and 27.9\% more than Domino in the same setting, and reaching up to 9.73times lossless speedup over locally measured autoregressive decoding.

We introduce Tree D-fusion, featuring the first collection of 600,000 environmentally aware, 3D simulation-ready tree models generated through Diffusion priors. Each reconstructed 3D tree model corresponds to an image from Google's Auto Arborist Dataset, comprising street view images and associated genus labels of trees across North America. Our method distills the scores of two tree-adapted diffusion models by utilizing text prompts to specify a tree genus, thus facilitating shape reconstruction. This process involves reconstructing a 3D tree envelope filled with point markers, which are subsequently utilized to estimate the tree's branching structure using the space colonization algorithm conditioned on a specified genus.

Speculative decoding accelerates autoregressive language models by using a lightweight drafter to propose multiple future tokens, which the target model then verifies in parallel. DFlash shows that a block diffusion drafter can generate an entire draft block in a single forward pass and achieve state-of-the-art speculative decoding performance, outperforming strong autoregressive drafters such as EAGLE-3. Vanilla DFlash, however, still verifies only a single drafted trajectory per round, potentially limiting its acceptance length. We introduce DDTree (Diffusion Draft Tree), a method that constructs a draft tree directly from the per-position distributions of a block diffusion drafter. Under a fixed node budget, DDTree uses a simple best-first heap algorithm to select the continuations that are most likely to match the target model according to a surrogate defined by the draft model's output. The resulting tree is verified efficiently in a single target model forward pass using an ancestor-only attention mask. Because DDTree builds on DFlash, a leading draft model for speculative decoding, these gains place DDTree among the leading approaches to speculative decoding.

Diffusion models have recently emerged as a powerful tool for planning. However, unlike Monte Carlo Tree Search (MCTS)-whose performance naturally improves with inference-time computation scaling-standard diffusion-based planners offer only limited avenues for the scalability. In this paper, we introduce Monte Carlo Tree Diffusion (MCTD), a novel framework that integrates the generative strength of diffusion models with the adaptive search capabilities of MCTS. Our method reconceptualizes denoising as a tree-structured process, allowing partially denoised plans to be iteratively evaluated, pruned, and refined. By selectively expanding promising trajectories while retaining the flexibility to revisit and improve suboptimal branches, MCTD achieves the benefits of MCTS such as controlling exploration-exploitation trade-offs within the diffusion framework. Empirical results on challenging long-horizon tasks show that MCTD outperforms diffusion baselines, yielding higher-quality solutions as inference-time computation increases.

Speculative decoding (SD) accelerates autoregressive Large Language Models (LLMs) by drafting multiple tokens and verifying them in parallel, but it faces a scaling limitation: increasing the draft budget improves speed only when acceptance remains high and drafting overhead stays low. This ceiling has been difficult to break because prior head-based SD methods face a causality-efficiency dilemma. Autoregressive drafters produce path-conditioned candidates that are effective for tree speculative decoding with higher acceptance length, but their drafting cost grows with tree depth. Bidirectional block-diffusion drafters generate all positions in one pass, but their branch-agnostic marginals can form individually plausible yet mutually inconsistent trees, wasting budget and reducing acceptance. We propose JetSpec, a head-based SD framework that combines one-forward drafting efficiency with branch-wise causal conditioning. JetSpec trains a causal parallel draft head over fused hidden states from the frozen target model, producing candidate trees whose scores align with the target model's autoregressive factorization. This enables JetSpec to convert larger draft budgets into longer accepted prefixes and higher end-to-end speedup. Across math, coding, and chat benchmarks on dense and MoE Qwen3 models, JetSpec consistently outperforms bidirectional-head and tree-based SD baselines. On H100 GPUs, JetSpec achieves up to 9.64x speedup on MATH-500 and 4.58x on open-ended conversational workloads, with further latency gains demonstrated through vLLM integration under realistic serving loads. Our code and models are available at https://github.com/hao-ai-lab/JetSpec.

We introduce a novel score-based diffusion framework named Twigs that incorporates multiple co-evolving flows for enriching conditional generation tasks. Specifically, a central or trunk diffusion process is associated with a primary variable (e.g., graph structure), and additional offshoot or stem processes are dedicated to dependent variables (e.g., graph properties or labels). A new strategy, which we call loop guidance, effectively orchestrates the flow of information between the trunk and the stem processes during sampling. This approach allows us to uncover intricate interactions and dependencies, and unlock new generative capabilities. We provide extensive experiments to demonstrate strong performance gains of the proposed method over contemporary baselines in the context of conditional graph generation, underscoring the potential of Twigs in challenging generative tasks such as inverse molecular design and molecular optimization.

One-shot block drafters for speculative decoding generate the full draft in a single forward pass, achieving strong throughput by eliminating sequential token generation. However, they predict each draft token conditioned only on the prefix context, with no dependence on previously drafted tokens. This non-autoregressive conditioning causes the drafter's distribution to diverge from the verifier's true autoregressive distribution as draft depth grows. This problem becomes more severe in tree-based drafting, where distinct branches are forced to share the same marginal distribution for subsequent tokens. We propose TreeFlash, which addresses this by incorporating an MLP layer conditioned on the drafter's hidden state and the previous token to approximate an autoregressive distribution. TreeFlash retains the O(1) decoding time complexity of one-shot drafters by employing a two-stage approximation mechanism. TreeFlash achieves state-of-the-art performance across a variety of tasks and models, improving over marginal tree drafting by 12% higher block efficiency and 9% higher speedup.

Diffusion models have emerged as a popular method for 3D generation. However, it is still challenging for diffusion models to efficiently generate diverse and high-quality 3D shapes. In this paper, we introduce OctFusion, which can generate 3D shapes with arbitrary resolutions in 2.5 seconds on a single Nvidia 4090 GPU, and the extracted meshes are guaranteed to be continuous and manifold. The key components of OctFusion are the octree-based latent representation and the accompanying diffusion models. The representation combines the benefits of both implicit neural representations and explicit spatial octrees and is learned with an octree-based variational autoencoder. The proposed diffusion model is a unified multi-scale U-Net that enables weights and computation sharing across different octree levels and avoids the complexity of widely used cascaded diffusion schemes. We verify the effectiveness of OctFusion on the ShapeNet and Objaverse datasets and achieve state-of-the-art performances on shape generation tasks. We demonstrate that OctFusion is extendable and flexible by generating high-quality color fields for textured mesh generation and high-quality 3D shapes conditioned on text prompts, sketches, or category labels. Our code and pre-trained models are available at https://github.com/octree-nn/octfusion.

Adapting a pretrained diffusion model to new objectives at inference time remains an open problem in generative modeling. Existing steering methods suffer from inaccurate value estimation, especially at high noise levels, which biases guidance. Moreover, information from past runs is not reused to improve sample quality, resulting in inefficient use of compute. Inspired by the success of Monte Carlo Tree Search, we address these limitations by casting inference-time alignment as a search problem that reuses past computations. We introduce a tree-based approach that samples from the reward-aligned target density by propagating terminal rewards back through the diffusion chain and iteratively refining value estimates with each additional generation. Our proposed method, Diffusion Tree Sampling (DTS), produces asymptotically exact samples from the target distribution in the limit of infinite rollouts, and its greedy variant, Diffusion Tree Search (DTS^star), performs a global search for high reward samples. On MNIST and CIFAR-10 class-conditional generation, DTS matches the FID of the best-performing baseline with up to 10times less compute. In text-to-image generation and language completion tasks, DTS^star effectively searches for high reward samples that match best-of-N with up to 5times less compute. By reusing information from previous generations, we get an anytime algorithm that turns additional compute into steadily better samples, providing a scalable approach for inference-time alignment of diffusion models.

Speculative decoding is an effective and lossless approach for accelerating LLM inference. However, existing widely adopted model-based draft designs, such as EAGLE3, improve accuracy at the cost of multi-step autoregressive inference, resulting in high drafting latency and ultimately rendering the drafting stage itself a performance bottleneck. Inspired by diffusion-based large language models (dLLMs), we propose DART, which leverages parallel generation to reduce drafting latency. DART predicts logits for multiple future masked positions in parallel within a single forward pass based on hidden states of the target model, thereby eliminating autoregressive rollouts in the draft model while preserving a lightweight design. Based on these parallel logit predictions, we further introduce an efficient tree pruning algorithm that constructs high-quality draft token trees with N-gram-enforced semantic continuity. DART substantially reduces draft-stage overhead while preserving high draft accuracy, leading to significantly improved end-to-end decoding speed. Experimental results demonstrate that DART achieves a 2.03x--3.44x wall-clock time speedup across multiple datasets, surpassing EAGLE3 by 30% on average and offering a practical speculative decoding framework. Code is released at https://github.com/fvliang/DART.

Speculative decoding accelerates autoregressive LLMs by having a lightweight drafter propose tokens that the target model verifies in parallel. Diffusion-based drafters further reduce drafting latency by proposing multiple tokens at once. However, these tokens are predicted independently, so a single early error causes prefix verification to discard the rest of the draft, even when it contains useful downstream predictions. We introduce DEdit, a diffusion-based drafter that can not only draft by conventional parallel unmasking but also iteratively edit its draft through token-to-token predictions. Through editing, later predictions can serve as bidirectional context for repairing earlier errors and extending the accepted prefix. To teach the model to repair errors while preserving correct predictions, we propose ProposalMix, a training scheme that mixes draft predictions with ground-truth tokens based on first-pass confidence during training. Across seven benchmarks on Qwen3-4B and Qwen3-8B, DEdit achieves the highest macro-average token acceptance and speedup among the evaluated drafters, reaching macro-average speedups of 5.72times and 5.97times over autoregressive generation under greedy decoding, respectively. Further analysis shows that acceptance improves with more editing passes and wider drafting windows, and that ProposalMix halves harmful edits that shorten the accepted prefix. Moreover, restricting the editor to causal attention lowers acceptance, especially on highly predictable outputs, indicating that future context is a key source of these gains.

We present LT3SD, a novel latent diffusion model for large-scale 3D scene generation. Recent advances in diffusion models have shown impressive results in 3D object generation, but are limited in spatial extent and quality when extended to 3D scenes. To generate complex and diverse 3D scene structures, we introduce a latent tree representation to effectively encode both lower-frequency geometry and higher-frequency detail in a coarse-to-fine hierarchy. We can then learn a generative diffusion process in this latent 3D scene space, modeling the latent components of a scene at each resolution level. To synthesize large-scale scenes with varying sizes, we train our diffusion model on scene patches and synthesize arbitrary-sized output 3D scenes through shared diffusion generation across multiple scene patches. Through extensive experiments, we demonstrate the efficacy and benefits of LT3SD for large-scale, high-quality unconditional 3D scene generation and for probabilistic completion for partial scene observations.

As large language models (LLMs) scale up, accuracy improves, but the autoregressive (AR) nature of decoding increases latency since each token requires a serial forward pass. Speculative decoding addresses this by employing a fast drafter to propose multi-token drafts, which are then verified in parallel by the target model. However, many deployments still rely on AR drafters, where sequential passes limit wall-clock gains. We revisit the drafting stage and present DiffuSpec, a training-free drop-in framework that uses a pretrained diffusion language model (DLM) to produce multi-token drafts in a single forward pass, while remaining compatible with standard AR verifiers. Because DLM drafts are generated under bidirectional conditioning, parallel per-position candidates form a token lattice in which the locally highest-probability token at each position need not form a causal left-to-right path. Moreover, DLM drafting requires pre-specifying a draft length, inducing a speed-quality trade-off. To address these challenges, we introduce two practical components: (i) a causal-consistency path search (CPS) over this lattice that extracts a left-to-right path aligned with AR verification; and (ii) an adaptive draft-length (ADL) controller that adjusts next proposal size based on recent acceptance feedback and realized generated length. Across benchmarks, DiffuSpec yields up to 3x wall-clock speedup, establishing diffusion-based drafting as a robust alternative to autoregressive drafters for speculative decoding.

Kinodynamic motion planning is concerned with computing collision-free trajectories while abiding by the robot's dynamic constraints. This critical problem is often tackled using sampling-based planners (SBPs) that explore the robot's high-dimensional state space by constructing a search tree via action propagations. Although SBPs can offer global guarantees on completeness and solution quality, their performance is often hindered by slow exploration due to uninformed action sampling. Learning-based approaches can yield significantly faster runtimes, yet they fail to generalize to out-of-distribution (OOD) scenarios and lack critical guarantees, e.g., safety, thus limiting their deployment on physical robots. We present Diffusion Tree (DiTree): a provably-generalizable framework leveraging diffusion policies (DPs) as informed samplers to efficiently guide state-space search within SBPs. DiTree combines DP's ability to model complex distributions of expert trajectories, conditioned on local observations, with the completeness of SBPs to yield provably-safe solutions within a few action propagation iterations for complex dynamical systems. We demonstrate DiTree's power with an implementation combining the popular RRT planner with a DP action sampler trained on a single environment. In comprehensive evaluations on OOD scenarios, % DiTree has comparable runtimes to a standalone DP (3x faster than classical SBPs), while improving the average success rate over DP and SBPs. DiTree is on average 3x faster than classical SBPs, and outperforms all other approaches by achieving roughly 30\% higher success rate. Project webpage: https://sites.google.com/view/ditree.

We present a cascaded diffusion model based on a part-level implicit 3D representation. Our model achieves state-of-the-art generation quality and also enables part-level shape editing and manipulation without any additional training in conditional setup. Diffusion models have demonstrated impressive capabilities in data generation as well as zero-shot completion and editing via a guided reverse process. Recent research on 3D diffusion models has focused on improving their generation capabilities with various data representations, while the absence of structural information has limited their capability in completion and editing tasks. We thus propose our novel diffusion model using a part-level implicit representation. To effectively learn diffusion with high-dimensional embedding vectors of parts, we propose a cascaded framework, learning diffusion first on a low-dimensional subspace encoding extrinsic parameters of parts and then on the other high-dimensional subspace encoding intrinsic attributes. In the experiments, we demonstrate the outperformance of our method compared with the previous ones both in generation and part-level completion and manipulation tasks.

Diffusion models have recently emerged as a powerful approach for trajectory planning. However, their inherently non-sequential nature limits their effectiveness in long-horizon reasoning tasks at test time. The recently proposed Monte Carlo Tree Diffusion (MCTD) offers a promising solution by combining diffusion with tree-based search, achieving state-of-the-art performance on complex planning problems. Despite its strengths, our analysis shows that MCTD incurs substantial computational overhead due to the sequential nature of tree search and the cost of iterative denoising. To address this, we propose Fast-MCTD, a more efficient variant that preserves the strengths of MCTD while significantly improving its speed and scalability. Fast-MCTD integrates two techniques: Parallel MCTD, which enables parallel rollouts via delayed tree updates and redundancy-aware selection; and Sparse MCTD, which reduces rollout length through trajectory coarsening. Experiments show that Fast-MCTD achieves up to 100x speedup over standard MCTD while maintaining or improving planning performance. Remarkably, it even outperforms Diffuser in inference speed on some tasks, despite Diffuser requiring no search and yielding weaker solutions. These results position Fast-MCTD as a practical and scalable solution for diffusion-based inference-time reasoning.

Efficiency, as a critical practical challenge for LLM-driven agentic and reasoning systems, is increasingly constrained by the inherent latency of autoregressive (AR) decoding. Speculative decoding mitigates this cost through a draft-verify scheme, yet existing approaches rely on AR draft models (a.k.a., drafters), which introduce two fundamental issues: (1) step-wise uncertainty accumulation leads to a progressive collapse of trust between the target model and the drafter, and (2) inherently sequential decoding of AR drafters. Together, these factors cause limited speedups. In this paper, we show that a diffusion large language model (dLLM) drafters can naturally overcome these issues through its fundamentally different probabilistic modeling and efficient parallel decoding strategy. Building on this insight, we introduce DEER, an efficient speculative decoding framework that drafts with diffusion and verifies with AR models. To enable high-quality drafting, DEER employs a two-stage training pipeline to align the dLLM-based drafters with the target AR model, and further adopts single-step decoding to generate long draft segments. Experiments show DEER reaches draft acceptance lengths of up to 32 tokens, far surpassing the 10 tokens achieved by EAGLE-3. Moreover, on HumanEval with Qwen3-30B-A3B, DEER attains a 5.54x speedup, while EAGLE-3 achieves only 2.41x. Code, model, demo, etc, will be available at https://czc726.github.io/DEER/

Target-conditioned diffusion drafters predict candidate tokens in parallel, yet each new block must wait for updated target-model hidden states. This forces drafting and verification to run sequentially, limiting speedup even though each block is generated in one pass. We introduce D3D, a standalone diffusion drafter that removes this inter-round dependency. D3D combines blockwise denoising with auxiliary autoregressive supervision to achieve long accepted prefixes without target hidden states. This independence lets D3D draft successor blocks during verification in one packed pass, enabling asynchronous speculative decoding. We progressively prune layers according to their effect on acceptance length to reduce the cost of packed drafting. Removing five of 36 layers retains over 99\% of mean acceptance length across three benchmarks with Qwen3-8B as the target. Across seven benchmarks, D3D averages 5.00times and 5.71times decoding speedup with Qwen3-8B and Qwen3-32B targets, compared with 4.03times and 3.67times for DFlash. On GSM8K with Qwen3-32B, speedup reaches 7.48times. Code is publicly available at https://github.com/fudan-generative-vision/D3D.

Speculative decoding accelerates LLM inference by drafting a tree of candidate continuations and verifying it in one target forward. Existing drafters fall into two camps with opposite weaknesses. Autoregressive drafters such as EAGLE-3 preserve dependence along each draft path but call the drafter once per tree depth, making drafting a non-trivial share of per-iteration latency. Parallel drafters cut drafter calls by predicting multiple future positions in one forward, but each position is predicted without seeing the others, producing paths the verifier rejects. In this paper, we propose SpecBlock, a block-iterative drafter that combines path dependence with cheap drafting. Each drafter forward produces K dependent positions and we call this a block. The draft tree grows through repeated block expansions. Two mechanisms explicitly carry path dependence to keep later draft positions accurate. Within each block, a layer-wise shift carries the previous position's hidden state into every decoder layer. Across blocks, each new block can start from any position of the previous block, inheriting its hidden state to extend the path. To spend verifier budget where acceptance is likely, a co-trained rank head replaces the fixed top-k tree by allocating per-position branching during drafting. To avoid training the drafter on prefixes it never produces at inference, a valid-prefix mask drops the loss at later positions once an earlier one is wrong. Beyond static drafting, a cost-aware bandit at deployment uses free verifier feedback to update the drafter selectively, only when the expected throughput gain exceeds the update cost. Experiments show that SpecBlock improves mean speedup by 8-13% over EAGLE-3 at 44-52% of its drafting cost, and cost-aware adaptation extends this lead to 11-19%.

In this paper, we present DesignDiffusion, a simple yet effective framework for the novel task of synthesizing design images from textual descriptions. A primary challenge lies in generating accurate and style-consistent textual and visual content. Existing works in a related task of visual text generation often focus on generating text within given specific regions, which limits the creativity of generation models, resulting in style or color inconsistencies between textual and visual elements if applied to design image generation. To address this issue, we propose an end-to-end, one-stage diffusion-based framework that avoids intricate components like position and layout modeling. Specifically, the proposed framework directly synthesizes textual and visual design elements from user prompts. It utilizes a distinctive character embedding derived from the visual text to enhance the input prompt, along with a character localization loss for enhanced supervision during text generation. Furthermore, we employ a self-play Direct Preference Optimization fine-tuning strategy to improve the quality and accuracy of the synthesized visual text. Extensive experiments demonstrate that DesignDiffusion achieves state-of-the-art performance in design image generation.

Autoregressive large language models (LLMs) deliver strong performance but require inherently sequential decoding, leading to high inference latency and poor GPU utilization. Speculative decoding mitigates this bottleneck by using a fast draft model whose outputs are verified in parallel by the target LLM; however, existing methods still rely on autoregressive drafting, which remains sequential and limits practical speedups. Diffusion LLMs offer a promising alternative by enabling parallel generation, but current diffusion models typically underperform compared with autoregressive models. In this paper, we introduce DFlash, a speculative decoding framework that employs a lightweight block diffusion model for parallel drafting. By generating draft tokens in a single forward pass and conditioning the draft model on context features extracted from the target model, DFlash enables efficient drafting with high-quality outputs and higher acceptance rates. Experiments show that DFlash achieves over 6x lossless acceleration across a range of models and tasks, delivering up to 2.5x higher speedup than the state-of-the-art speculative decoding method EAGLE-3.

Creating graphic layouts is a fundamental step in graphic designs. In this work, we present a novel generative model named LayoutDiffusion for automatic layout generation. As layout is typically represented as a sequence of discrete tokens, LayoutDiffusion models layout generation as a discrete denoising diffusion process. It learns to reverse a mild forward process, in which layouts become increasingly chaotic with the growth of forward steps and layouts in the neighboring steps do not differ too much. Designing such a mild forward process is however very challenging as layout has both categorical attributes and ordinal attributes. To tackle the challenge, we summarize three critical factors for achieving a mild forward process for the layout, i.e., legality, coordinate proximity and type disruption. Based on the factors, we propose a block-wise transition matrix coupled with a piece-wise linear noise schedule. Experiments on RICO and PubLayNet datasets show that LayoutDiffusion outperforms state-of-the-art approaches significantly. Moreover, it enables two conditional layout generation tasks in a plug-and-play manner without re-training and achieves better performance than existing methods.

Being the most cutting-edge generative methods, diffusion methods have shown great advances in wide generation tasks. Among them, graph generation attracts significant research attention for its broad application in real life. In our survey, we systematically and comprehensively review on diffusion-based graph generative methods. We first make a review on three mainstream paradigms of diffusion methods, which are denoising diffusion probabilistic models, score-based genrative models, and stochastic differential equations. Then we further categorize and introduce the latest applications of diffusion models on graphs. In the end, we point out some limitations of current studies and future directions of future explorations. The summary of existing methods metioned in this survey is in https://github.com/zhejiangzhuque/Diffusion-based-Graph-Generative-Methods.

Although the recent rapid evolution of 3D generative neural networks greatly improves 3D shape generation, it is still not convenient for ordinary users to create 3D shapes and control the local geometry of generated shapes. To address these challenges, we propose a diffusion-based 3D generation framework -- locally attentional SDF diffusion, to model plausible 3D shapes, via 2D sketch image input. Our method is built on a two-stage diffusion model. The first stage, named occupancy-diffusion, aims to generate a low-resolution occupancy field to approximate the shape shell. The second stage, named SDF-diffusion, synthesizes a high-resolution signed distance field within the occupied voxels determined by the first stage to extract fine geometry. Our model is empowered by a novel view-aware local attention mechanism for image-conditioned shape generation, which takes advantage of 2D image patch features to guide 3D voxel feature learning, greatly improving local controllability and model generalizability. Through extensive experiments in sketch-conditioned and category-conditioned 3D shape generation tasks, we validate and demonstrate the ability of our method to provide plausible and diverse 3D shapes, as well as its superior controllability and generalizability over existing work. Our code and trained models are available at https://zhengxinyang.github.io/projects/LAS-Diffusion.html

Decision trees and diffusion models are ostensibly disparate model classes, one discrete and hierarchical, the other continuous and dynamic. This work unifies the two by establishing a crisp mathematical correspondence between hierarchical decision trees and diffusion processes in appropriate limiting regimes. Our unification reveals a shared optimization principle: Global Trajectory Score Matching (GTSM), for which gradient boosting (in an idealized version) is asymptotically optimal. We underscore the conceptual value of our work through two key practical instantiations: \treeflow, which achieves competitive generation quality on tabular data with higher fidelity and a 2\times computational speedup, and \dsmtree, a novel distillation method that transfers hierarchical decision logic into neural networks, matching teacher performance within 2\% on many benchmarks.

One of the most compelling features of global discrete diffusion language models is their global bidirectional contextual capability. However, existing block-based diffusion studies tend to introduce autoregressive priors, which, while offering benefits, can cause models to lose this global coherence at the macro level. To regain global contextual understanding while preserving the advantages of the semi-autoregressive paradigm, we propose Diffusion in Diffusion, a 'draft-then-refine' framework designed to overcome the irreversibility and myopia problems inherent in block diffusion models. Our approach first employs block diffusion to generate rapid drafts using small blocks, then refines these drafts through global bidirectional diffusion with a larger bidirectional receptive field. We utilize snapshot confidence remasking to identify the most critical tokens that require modification, and apply mix-scale training to expand the block diffusion model's global capabilities. Empirical results demonstrate that our approach sets a new benchmark for discrete diffusion models on the OpenWebText dataset. Using only 26% of the fine-tuning budget of baseline models, we reduce generative perplexity from 25.7 to 21.9, significantly narrowing the performance gap with autoregressive models.

Diffusion probabilistic models have achieved remarkable success in text guided image generation. However, generating 3D shapes is still challenging due to the lack of sufficient data containing 3D models along with their descriptions. Moreover, text based descriptions of 3D shapes are inherently ambiguous and lack details. In this paper, we propose a sketch and text guided probabilistic diffusion model for colored point cloud generation that conditions the denoising process jointly with a hand drawn sketch of the object and its textual description. We incrementally diffuse the point coordinates and color values in a joint diffusion process to reach a Gaussian distribution. Colored point cloud generation thus amounts to learning the reverse diffusion process, conditioned by the sketch and text, to iteratively recover the desired shape and color. Specifically, to learn effective sketch-text embedding, our model adaptively aggregates the joint embedding of text prompt and the sketch based on a capsule attention network. Our model uses staged diffusion to generate the shape and then assign colors to different parts conditioned on the appearance prompt while preserving precise shapes from the first stage. This gives our model the flexibility to extend to multiple tasks, such as appearance re-editing and part segmentation. Experimental results demonstrate that our model outperforms recent state-of-the-art in point cloud generation.

Large language models generate code one token at a time. Their autoregressive generation process lacks the feedback of observing the program's output. Training LLMs to suggest edits directly can be challenging due to the scarcity of rich edit data. To address these problems, we propose neural diffusion models that operate on syntax trees of any context-free grammar. Similar to image diffusion models, our method also inverts ``noise'' applied to syntax trees. Rather than generating code sequentially, we iteratively edit it while preserving syntactic validity, which makes it easy to combine this neural model with search. We apply our approach to inverse graphics tasks, where our model learns to convert images into programs that produce those images. Combined with search, our model is able to write graphics programs, see the execution result, and debug them to meet the required specifications. We additionally show how our system can write graphics programs for hand-drawn sketches.

Speculative decoding has been widely used to accelerate autoregressive (AR) text generation. However, its effectiveness in visual AR models remains limited due to token selection ambiguity, where multiple tokens receive similarly low probabilities, reducing acceptance rates. While dynamic tree drafting has been proposed to improve speculative decoding, we show that it fails to mitigate token selection ambiguity, resulting in shallow draft trees and suboptimal acceleration. To address this, we introduce LANTERN++, a novel framework that integrates static tree drafting with a relaxed acceptance condition, allowing drafts to be selected independently of low-confidence predictions. This enables deeper accepted sequences, improving decoding efficiency while preserving image quality. Extensive experiments on state-of-the-art visual AR models demonstrate that LANTERN++ significantly accelerates inference, achieving up to times 2.56 speedup over standard AR decoding while maintaining high image quality.

The autoregressive nature of large language models (LLMs) remains a significant bottleneck for inference, particularly in complex agentic workloads. While speculative decoding (SD) accelerates inference, current approaches rely on static drafting paradigms, utilising either autoregressive drafting models for reasoning or diffusion-based parallel drafting models for structured outputs. We empirically find that drafting accuracy fluctuates dramatically within a single sequence, leaving significant performance unrealised by static paradigms and coarse-grained routing. To address this volatility, we introduce WhiFlash, the first cross-paradigm SD method that unifies autoregressive and diffusion-based parallel drafting under a single token-level controller. WhiFlash adopts a fine-grained routing mechanism that employs either a lightweight entropy-based or a learned neural policy, both parametrised to provide a tunable balance between expected token gain and latency. To make high-frequency switching computationally viable, we introduce novel cache-management optimisations, Lazy Catch-up and KV-only Prefill, reducing switching overhead to below 7% of per-round latency. By capitalising on the complementary strengths of fundamentally distinct drafting architectures, WhiFlash achieves significantly higher acceptance lengths, yielding category-specific throughput gains of up to 69.6% over the state-of-the-art autoregressive EAGLE-3 and 37.3% over the diffusion-based DFlash.

The enormous success of diffusion models in text-to-image synthesis has made them promising candidates for the next generation of end-user applications for image generation and editing. Previous works have focused on improving the usability of diffusion models by reducing the inference time or increasing user interactivity by allowing new, fine-grained controls such as region-based text prompts. However, we empirically find that integrating both branches of works is nontrivial, limiting the potential of diffusion models. To solve this incompatibility, we present StreamMultiDiffusion, the first real-time region-based text-to-image generation framework. By stabilizing fast inference techniques and restructuring the model into a newly proposed multi-prompt stream batch architecture, we achieve times 10 faster panorama generation than existing solutions, and the generation speed of 1.57 FPS in region-based text-to-image synthesis on a single RTX 2080 Ti GPU. Our solution opens up a new paradigm for interactive image generation named semantic palette, where high-quality images are generated in real-time from given multiple hand-drawn regions, encoding prescribed semantic meanings (e.g., eagle, girl). Our code and demo application are available at https://github.com/ironjr/StreamMultiDiffusion.

Graph generation is a critical yet challenging task, as empirical analyses require a deep understanding of complex, non-Euclidean structures. Diffusion models have recently made significant advances in graph generation, but these models are typically adapted from image generation frameworks and overlook inherent higher-order topology, limiting their ability to capture graph topology. In this work, we propose Higher-order Guided Diffusion (HOG-Diff), a principled framework that progressively generates plausible graphs with inherent topological structures. HOG-Diff follows a coarse-to-fine generation curriculum, guided by higher-order topology and implemented via diffusion bridges. We further prove that our model admits stronger theoretical guarantees than classical diffusion frameworks. Extensive experiments across eight graph generation benchmarks, spanning diverse domains and including large-scale settings, demonstrate the scalability of our method and its superior performance on both pairwise and higher-order topological metrics. Our project page is available https://circle-group.github.io/research/hog-diff/{here}.

Probabilistic diffusion models have achieved state-of-the-art results for image synthesis, inpainting, and text-to-image tasks. However, they are still in the early stages of generating complex 3D shapes. This work proposes Diffusion-SDF, a generative model for shape completion, single-view reconstruction, and reconstruction of real-scanned point clouds. We use neural signed distance functions (SDFs) as our 3D representation to parameterize the geometry of various signals (e.g., point clouds, 2D images) through neural networks. Neural SDFs are implicit functions and diffusing them amounts to learning the reversal of their neural network weights, which we solve using a custom modulation module. Extensive experiments show that our method is capable of both realistic unconditional generation and conditional generation from partial inputs. This work expands the domain of diffusion models from learning 2D, explicit representations, to 3D, implicit representations.

Diffusion models have opened up new avenues for the field of image generation, resulting in the proliferation of high-quality models shared on open-source platforms. However, a major challenge persists in current text-to-image systems are often unable to handle diverse inputs, or are limited to single model results. Current unified attempts often fall into two orthogonal aspects: i) parse Diverse Prompts in input stage; ii) activate expert model to output. To combine the best of both worlds, we propose DiffusionGPT, which leverages Large Language Models (LLM) to offer a unified generation system capable of seamlessly accommodating various types of prompts and integrating domain-expert models. DiffusionGPT constructs domain-specific Trees for various generative models based on prior knowledge. When provided with an input, the LLM parses the prompt and employs the Trees-of-Thought to guide the selection of an appropriate model, thereby relaxing input constraints and ensuring exceptional performance across diverse domains. Moreover, we introduce Advantage Databases, where the Tree-of-Thought is enriched with human feedback, aligning the model selection process with human preferences. Through extensive experiments and comparisons, we demonstrate the effectiveness of DiffusionGPT, showcasing its potential for pushing the boundaries of image synthesis in diverse domains.

Speculative decoding accelerates language model inference by verifying multiple draft tokens in a single target-model pass. Recent parallel drafters have achieved breakthrough performance in frontier production models, but their effectiveness deteriorates as the entropy of target distributions increases due to insufficient draft diversity. To overcome this bottleneck without sacrificing parallelism, we introduce UBTree, a parallel drafter that couples a Unigram proposer with a Bigram selector to construct drafting Trees. The unigram proposer is trained with the standard cross-entropy objective to generate candidate tokens independently for each position, while a lightweight bigram selector predicts transition scores between adjacent candidate pairs. Unlike the proposer, the selector is trained with a renormalized KL objective on high-temperature data. This tree-native training broadens the supervision beyond the greedy path, encouraging plausible alternative branches that improve the chance of accepting additional tokens during tree verification. Across seven standardized benchmarks with Qwen3-4B and Qwen3-8B, UBTree achieves an average speedup of 5.84--6.94times over autoregressive decoding and outperforms DARTree in all 28 comparisons. Production-scale evaluation further demonstrates UBTree's advantage over frontier baselines such as DSpark.

Block drafters such as DFlash draft a block of future tokens in one forward pass, and draft trees such as DDTree verify the prefixes ranked highest by the product of the drafter's per-position distributions. Under tree verification, the expected number of accepted tokens is the probability mass the tree covers. We show that a product misallocates it: when the continuation can follow several futures, it splices them into chimeras, prefixes stitched together from different futures that the target never produces, and gives them as much budget as the futures themselves. Barring ties, no product-ranked tree can hold two futures that disagree in m positions without 2^{m-1}-1 chimeras, however well the drafter is trained, and in practice chimeras make up 27-33% of a 64-node tree. We propose Multi-Future Drafting (MFD), which restores the coupling with a latent variable instead of the chain rule: K learned mode embeddings at the drafter's input draft K coherent blocks in the same pass, and a mixture DDTree lets the verifier pick the future the target takes, losslessly and with K+1 extra vectors. On four Qwen targets from 4B to 27B parameters, at batch size 1, MFD reaches up to 7.8times speedup, 5-8% faster than the best single-mode tree trained identically and, on Qwen3-4B and Qwen3-8B, 9-16% faster than the released DARTree trained on the same prompts.

While plan-and-infill decoding in Masked Diffusion Models (MDMs) shows promise for mathematical and code reasoning, performance remains highly sensitive to slot infilling order, often yielding substantial output variance. We introduce McDiffuSE, a framework that formulates slot selection as decision making and optimises infilling orders through Monte Carlo Tree Search (MCTS). McDiffuSE uses look-ahead simulations to evaluate partial completions before commitment, systematically exploring the combinatorial space of generation orders. Experiments show an average improvement of 3.2% over autoregressive baselines and 8.0% over baseline plan-and-infill, with notable gains of 19.5% on MBPP and 4.9% on MATH500. Our analysis reveals that while McDiffuSE predominantly follows sequential ordering, incorporating non-sequential generation is essential for maximising performance. We observe that larger exploration constants, rather than increased simulations, are necessary to overcome model confidence biases and discover effective orderings. These findings establish MCTS-based planning as an effective approach for enhancing generation quality in MDMs.

Diffusion-based generative graph models have been proven effective in generating high-quality small graphs. However, they need to be more scalable for generating large graphs containing thousands of nodes desiring graph statistics. In this work, we propose EDGE, a new diffusion-based generative graph model that addresses generative tasks with large graphs. To improve computation efficiency, we encourage graph sparsity by using a discrete diffusion process that randomly removes edges at each time step and finally obtains an empty graph. EDGE only focuses on a portion of nodes in the graph at each denoising step. It makes much fewer edge predictions than previous diffusion-based models. Moreover, EDGE admits explicitly modeling the node degrees of the graphs, further improving the model performance. The empirical study shows that EDGE is much more efficient than competing methods and can generate large graphs with thousands of nodes. It also outperforms baseline models in generation quality: graphs generated by our approach have more similar graph statistics to those of the training graphs.

Speculative decoding enhances the efficiency of large language models (LLMs) by leveraging a draft model to draft for a larger target model to review. However, drafting in speculative decoding involves slow autoregressive generation and generating tokens of different importance with the same time allocation. These two inefficiencies lead to its suboptimal performance. To address this issue, we introduce Cascade Speculative Drafting (CS. Drafting), a novel approach that employs two types of cascades. The Vertical Cascade eliminates autoregressive generation from neural models. The Horizontal Cascade constitutes efficient time allocation in drafting with its optimality supported by our theoretical analysis. Combining both cascades, our CS. Drafting algorithm has achieved up to 72 percent additional speedup over speculative decoding in our experiments while keeping the same output distribution.

Diffusion models have been central to the development of recent image, video, and even text generation systems. They posses striking geometric properties that can be faithfully portrayed in low-dimensional settings. However, existing resources for explaining diffusion either require an advanced theoretical foundation or focus on their neural network architectures rather than their rich geometric properties. We introduce Diffusion Explorer, an interactive tool to explain the geometric properties of diffusion models. Users can train 2D diffusion models in the browser and observe the temporal dynamics of their sampling process. Diffusion Explorer leverages interactive animation, which has been shown to be a powerful tool for making engaging visualizations of dynamic systems, making it well suited to explaining diffusion models which represent stochastic processes that evolve over time. Diffusion Explorer is open source and a live demo is available at alechelbling.com/Diffusion-Explorer.

Autoregressive language models demonstrate excellent performance in various scenarios. However, the inference efficiency is limited by its one-step-one-word generation mode, which has become a pressing problem recently as the models become increasingly larger. Speculative decoding employs a "draft and then verify" mechanism to allow multiple tokens to be generated in one step, realizing lossless acceleration. Existing methods mainly adopt fixed heuristic draft structures, which fail to adapt to different situations to maximize the acceptance length during verification. To alleviate this dilemma, we proposed OPT-Tree, an algorithm to construct adaptive and scalable draft trees. It searches the optimal tree structure that maximizes the mathematical expectation of the acceptance length in each decoding step. Experimental results reveal that OPT-Tree outperforms the existing draft structures and achieves a speed-up ratio of up to 3.2 compared with autoregressive decoding. If the draft model is powerful enough and the node budget is sufficient, it can generate more than ten tokens in a single step. Our code is available at https://github.com/Jikai0Wang/OPT-Tree.

Diffusion models have made significant contributions to computer vision, sparking a growing interest in the community recently regarding the application of them to graph generation. Existing discrete graph diffusion models exhibit heightened computational complexity and diminished training efficiency. A preferable and natural way is to directly diffuse the graph within the latent space. However, due to the non-Euclidean structure of graphs is not isotropic in the latent space, the existing latent diffusion models effectively make it difficult to capture and preserve the topological information of graphs. To address the above challenges, we propose a novel geometrically latent diffusion framework HypDiff. Specifically, we first establish a geometrically latent space with interpretability measures based on hyperbolic geometry, to define anisotropic latent diffusion processes for graphs. Then, we propose a geometrically latent diffusion process that is constrained by both radial and angular geometric properties, thereby ensuring the preservation of the original topological properties in the generative graphs. Extensive experimental results demonstrate the superior effectiveness of HypDiff for graph generation with various topologies.

Generating visual layouts is an essential ingredient of graphic design. The ability to condition layout generation on a partial subset of component attributes is critical to real-world applications that involve user interaction. Recently, diffusion models have demonstrated high-quality generative performances in various domains. However, it is unclear how to apply diffusion models to the natural representation of layouts which consists of a mix of discrete (class) and continuous (location, size) attributes. To address the conditioning layout generation problem, we introduce DLT, a joint discrete-continuous diffusion model. DLT is a transformer-based model which has a flexible conditioning mechanism that allows for conditioning on any given subset of all the layout component classes, locations, and sizes. Our method outperforms state-of-the-art generative models on various layout generation datasets with respect to different metrics and conditioning settings. Additionally, we validate the effectiveness of our proposed conditioning mechanism and the joint continuous-diffusion process. This joint process can be incorporated into a wide range of mixed discrete-continuous generative tasks.

Finding a suitable layout represents a crucial task for diverse applications in graphic design. Motivated by simpler and smoother sampling trajectories, we explore the use of Flow Matching as an alternative to current diffusion-based layout generation models. Specifically, we propose LayoutFlow, an efficient flow-based model capable of generating high-quality layouts. Instead of progressively denoising the elements of a noisy layout, our method learns to gradually move, or flow, the elements of an initial sample until it reaches its final prediction. In addition, we employ a conditioning scheme that allows us to handle various generation tasks with varying degrees of conditioning with a single model. Empirically, LayoutFlow performs on par with state-of-the-art models while being significantly faster.

For an artist or a graphic designer, the spatial layout of a scene is a critical design choice. However, existing text-to-image diffusion models provide limited support for incorporating spatial information. This paper introduces Composite Diffusion as a means for artists to generate high-quality images by composing from the sub-scenes. The artists can specify the arrangement of these sub-scenes through a flexible free-form segment layout. They can describe the content of each sub-scene primarily using natural text and additionally by utilizing reference images or control inputs such as line art, scribbles, human pose, canny edges, and more. We provide a comprehensive and modular method for Composite Diffusion that enables alternative ways of generating, composing, and harmonizing sub-scenes. Further, we wish to evaluate the composite image for effectiveness in both image quality and achieving the artist's intent. We argue that existing image quality metrics lack a holistic evaluation of image composites. To address this, we propose novel quality criteria especially relevant to composite generation. We believe that our approach provides an intuitive method of art creation. Through extensive user surveys, quantitative and qualitative analysis, we show how it achieves greater spatial, semantic, and creative control over image generation. In addition, our methods do not need to retrain or modify the architecture of the base diffusion models and can work in a plug-and-play manner with the fine-tuned models.

Existing single image-to-3D creation methods typically involve a two-stage process, first generating multi-view images, and then using these images for 3D reconstruction. However, training these two stages separately leads to significant data bias in the inference phase, thus affecting the quality of reconstructed results. We introduce a unified 3D generation framework, named Ouroboros3D, which integrates diffusion-based multi-view image generation and 3D reconstruction into a recursive diffusion process. In our framework, these two modules are jointly trained through a self-conditioning mechanism, allowing them to adapt to each other's characteristics for robust inference. During the multi-view denoising process, the multi-view diffusion model uses the 3D-aware maps rendered by the reconstruction module at the previous timestep as additional conditions. The recursive diffusion framework with 3D-aware feedback unites the entire process and improves geometric consistency.Experiments show that our framework outperforms separation of these two stages and existing methods that combine them at the inference phase. Project page: https://costwen.github.io/Ouroboros3D/

Diffusion models are the current state-of-the-art in image generation, synthesizing high-quality images by breaking down the generation process into many fine-grained denoising steps. Despite their good performance, diffusion models are computationally expensive, requiring many neural function evaluations (NFEs). In this work, we propose an anytime diffusion-based method that can generate viable images when stopped at arbitrary times before completion. Using existing pretrained diffusion models, we show that the generation scheme can be recomposed as two nested diffusion processes, enabling fast iterative refinement of a generated image. We use this Nested Diffusion approach to peek into the generation process and enable flexible scheduling based on the instantaneous preference of the user. In experiments on ImageNet and Stable Diffusion-based text-to-image generation, we show, both qualitatively and quantitatively, that our method's intermediate generation quality greatly exceeds that of the original diffusion model, while the final slow generation result remains comparable.

Controllable layout generation refers to the process of creating a plausible visual arrangement of elements within a graphic design (e.g., document and web designs) with constraints representing design intentions. Although recent diffusion-based models have achieved state-of-the-art FID scores, they tend to exhibit more pronounced misalignment compared to earlier transformer-based models. In this work, we propose the LAyout Constraint diffusion modEl (LACE), a unified model to handle a broad range of layout generation tasks, such as arranging elements with specified attributes and refining or completing a coarse layout design. The model is based on continuous diffusion models. Compared with existing methods that use discrete diffusion models, continuous state-space design can enable the incorporation of differentiable aesthetic constraint functions in training. For conditional generation, we introduce conditions via masked input. Extensive experiment results show that LACE produces high-quality layouts and outperforms existing state-of-the-art baselines.

Speculative decoding accelerates LLM inference by having a small drafter propose tokens that a larger target model verifies in parallel. Recent diffusion-based parallel drafters such as DFlash predict the full B-token block in one forward pass, enabling deeper drafters and longer accepted blocks. However, existing multi-token drafter objectives often use fixed position-dependent weighting schedules, such as head-dependent weights or block-position decays, which do not adapt as the positions limiting acceptance change during training. To address this, we derive per-position training weights from a differentiable surrogate of expected accepted draft length, matching the weight of each position to its log-probability gradient contribution. The resulting loss, D-PACE (Dynamic Position-Aware Cross-Entropy), shifts training signal toward positions that currently limit acceptance as the drafter improves. Across six benchmarks, two Qwen3-4B draft depths, two decoding temperatures, and two additional target models, D-PACE consistently improves both wall-clock speedup and average emitted length, with 2.3\% measured training-time overhead and no changes to the drafter architecture or inference procedure.

We present a novel generative 3D modeling system, coined CraftsMan, which can generate high-fidelity 3D geometries with highly varied shapes, regular mesh topologies, and detailed surfaces, and, notably, allows for refining the geometry in an interactive manner. Despite the significant advancements in 3D generation, existing methods still struggle with lengthy optimization processes, irregular mesh topologies, noisy surfaces, and difficulties in accommodating user edits, consequently impeding their widespread adoption and implementation in 3D modeling software. Our work is inspired by the craftsman, who usually roughs out the holistic figure of the work first and elaborates the surface details subsequently. Specifically, we employ a 3D native diffusion model, which operates on latent space learned from latent set-based 3D representations, to generate coarse geometries with regular mesh topology in seconds. In particular, this process takes as input a text prompt or a reference image and leverages a powerful multi-view (MV) diffusion model to generate multiple views of the coarse geometry, which are fed into our MV-conditioned 3D diffusion model for generating the 3D geometry, significantly improving robustness and generalizability. Following that, a normal-based geometry refiner is used to significantly enhance the surface details. This refinement can be performed automatically, or interactively with user-supplied edits. Extensive experiments demonstrate that our method achieves high efficacy in producing superior-quality 3D assets compared to existing methods. HomePage: https://craftsman3d.github.io/, Code: https://github.com/wyysf-98/CraftsMan

Diffusion and autoregression (AR) have long been seen as different categories of generative models, with diffusion specialising in continuous fields and AR specialising in discrete tokens. Recent work seeks to combine the advantages of the two models, and each hybrid fixes its decoding schedule by design. In this paper, we ask whether the performance of decoding schedules of one model can be predicted before decoding at a fixed number of steps. We describe diffusion, AR, and models in between as paths on one corruption lattice, and define the cost of a schedule as the dependence its parallel steps discard. The cost shows that the fewest steps of a zero-cost schedule are set by the geometry of the data, in the same way for tokens and for continuous fields. In particular, for data that are Markov on a graph and dependent along its paths, the fewest steps equal the graph's treedepth, which is logarithmic in the length of a sequence and linear in the side length of a grid. With fewer steps than the treedepth, every schedule pays a positive cost, whose ranking we predict before decoding with a kernel of pairwise dependence estimated from pretrained weights. Across text generation, image generation, and video generation, we verify most of the predictions about the rankings of different schedules under different metrics and benchmarks. This work therefore provides a design principle for decoding for future AR models, diffusion models, and anything in between. Our code is available at https://github.com/TSUITUENYUE/The-Lattice-of-Transition-Laws.

We propose a diffusion-based approach for Text-to-Image (T2I) generation with consistent and interactive 3D layout control and editing. While prior methods improve spatial adherence using 2D cues or iterative copy-warp-paste strategies, they often distort object geometry and fail to preserve consistency across edits. To address these limitations, we introduce a framework for Positioning Objects Consistently and Interactively (POCI-Diff), a novel formulation for jointly enforcing 3D geometric constraints and instance-level semantic binding within a unified diffusion process. Our method enables explicit per-object semantic control by binding individual text descriptions to specific 3D bounding boxes through Blended Latent Diffusion, allowing one-shot synthesis of complex multi-object scenes. We further propose a warping-free generative editing pipeline that supports object insertion, removal, and transformation via regeneration rather than pixel deformation. To preserve object identity and consistency across edits, we condition the diffusion process on reference images using IP-Adapter, enabling coherent object appearance throughout interactive 3D editing while maintaining global scene coherence. Experimental results demonstrate that POCI-Diff produces high-quality images consistent with the specified 3D layouts and edits, outperforming state-of-the-art methods in both visual fidelity and layout adherence while eliminating warping-induced geometric artifacts.

A central problem in biology is to understand how organisms evolve and adapt to their environment by acquiring variations in the observable characteristics or traits of species across the tree of life. With the growing availability of large-scale image repositories in biology and recent advances in generative modeling, there is an opportunity to accelerate the discovery of evolutionary traits automatically from images. Toward this goal, we introduce Phylo-Diffusion, a novel framework for conditioning diffusion models with phylogenetic knowledge represented in the form of HIERarchical Embeddings (HIER-Embeds). We also propose two new experiments for perturbing the embedding space of Phylo-Diffusion: trait masking and trait swapping, inspired by counterpart experiments of gene knockout and gene editing/swapping. Our work represents a novel methodological advance in generative modeling to structure the embedding space of diffusion models using tree-based knowledge. Our work also opens a new chapter of research in evolutionary biology by using generative models to visualize evolutionary changes directly from images. We empirically demonstrate the usefulness of Phylo-Diffusion in capturing meaningful trait variations for fishes and birds, revealing novel insights about the biological mechanisms of their evolution.

Accelerating inference in Large Language Models (LLMs) is critical for real-time interactions, as they have been widely incorporated into real-world services. Speculative decoding, a fully algorithmic solution, has gained attention for improving inference speed by drafting and verifying tokens, thereby generating multiple tokens in a single forward pass. However, current drafting strategies usually require significant fine-tuning or have inconsistent performance across tasks. To address these challenges, we propose Hierarchy Drafting (HD), a novel lossless drafting approach that organizes various token sources into multiple databases in a hierarchical framework based on temporal locality. In the drafting step, HD sequentially accesses multiple databases to obtain draft tokens from the highest to the lowest locality, ensuring consistent acceleration across diverse tasks and minimizing drafting latency. Our experiments on Spec-Bench using LLMs with 7B and 13B parameters demonstrate that HD outperforms existing database drafting methods, achieving robust inference speedups across model sizes, tasks, and temperatures.

This paper introduces a novel hierarchical autoencoder that maps 3D models into a highly compressed latent space. The hierarchical autoencoder is specifically designed to tackle the challenges arising from large-scale datasets and generative modeling using diffusion. Different from previous approaches that only work on a regular image or volume grid, our hierarchical autoencoder operates on unordered sets of vectors. Each level of the autoencoder controls different geometric levels of detail. We show that the model can be used to represent a wide range of 3D models while faithfully representing high-resolution geometry details. The training of the new architecture takes 0.70x time and 0.58x memory compared to the baseline. We also explore how the new representation can be used for generative modeling. Specifically, we propose a cascaded diffusion framework where each stage is conditioned on the previous stage. Our design extends existing cascaded designs for image and volume grids to vector sets.

Layout generation aims to synthesize realistic graphic scenes consisting of elements with different attributes including category, size, position, and between-element relation. It is a crucial task for reducing the burden on heavy-duty graphic design works for formatted scenes, e.g., publications, documents, and user interfaces (UIs). Diverse application scenarios impose a big challenge in unifying various layout generation subtasks, including conditional and unconditional generation. In this paper, we propose a Layout Diffusion Generative Model (LDGM) to achieve such unification with a single decoupled diffusion model. LDGM views a layout of arbitrary missing or coarse element attributes as an intermediate diffusion status from a completed layout. Since different attributes have their individual semantics and characteristics, we propose to decouple the diffusion processes for them to improve the diversity of training samples and learn the reverse process jointly to exploit global-scope contexts for facilitating generation. As a result, our LDGM can generate layouts either from scratch or conditional on arbitrary available attributes. Extensive qualitative and quantitative experiments demonstrate our proposed LDGM outperforms existing layout generation models in both functionality and performance.

The diffusion model has been proven a powerful generative model in recent years, yet remains a challenge in generating visual text. Several methods alleviated this issue by incorporating explicit text position and content as guidance on where and what text to render. However, these methods still suffer from several drawbacks, such as limited flexibility and automation, constrained capability of layout prediction, and restricted style diversity. In this paper, we present TextDiffuser-2, aiming to unleash the power of language models for text rendering. Firstly, we fine-tune a large language model for layout planning. The large language model is capable of automatically generating keywords for text rendering and also supports layout modification through chatting. Secondly, we utilize the language model within the diffusion model to encode the position and texts at the line level. Unlike previous methods that employed tight character-level guidance, this approach generates more diverse text images. We conduct extensive experiments and incorporate user studies involving human participants as well as GPT-4V, validating TextDiffuser-2's capacity to achieve a more rational text layout and generation with enhanced diversity. The code and model will be available at https://aka.ms/textdiffuser-2.

Reinforcement learning (RL) post-training is crucial for aligning generative models with human preferences, but its prohibitive computational cost remains a major barrier to widespread adoption. We introduce TreeGRPO, a novel RL framework that dramatically improves training efficiency by recasting the denoising process as a search tree. From shared initial noise samples, TreeGRPO strategically branches to generate multiple candidate trajectories while efficiently reusing their common prefixes. This tree-structured approach delivers three key advantages: (1) High sample efficiency, achieving better performance under same training samples (2) Fine-grained credit assignment via reward backpropagation that computes step-specific advantages, overcoming the uniform credit assignment limitation of trajectory-based methods, and (3) Amortized computation where multi-child branching enables multiple policy updates per forward pass. Extensive experiments on both diffusion and flow-based models demonstrate that TreeGRPO achieves 2.4times faster training while establishing a superior Pareto frontier in the efficiency-reward trade-off space. Our method consistently outperforms GRPO baselines across multiple benchmarks and reward models, providing a scalable and effective pathway for RL-based visual generative model alignment. The project website is available at treegrpo.github.io.

Realistic hair strand generation is crucial for applications like computer graphics and virtual reality. While diffusion models can generate hairstyles from text or images, these inputs lack precision and user-friendliness. Instead, we propose the first sketch-based strand generation model, which offers finer control while remaining user-friendly. Our framework tackles key challenges, such as modeling complex strand interactions and diverse sketch patterns, through two main innovations: a learnable strand upsampling strategy that encodes 3D strands into multi-scale latent spaces, and a multi-scale adaptive conditioning mechanism using a transformer with diffusion heads to ensure consistency across granularity levels. Experiments on several benchmark datasets show our method outperforms existing approaches in realism and precision. Qualitative results further confirm its effectiveness. Code will be released at [GitHub](https://github.com/fighting-Zhang/StrandDesigner).

Diffusion models have shown impressive results in text-to-image synthesis. Using massive datasets of captioned images, diffusion models learn to generate raster images of highly diverse objects and scenes. However, designers frequently use vector representations of images like Scalable Vector Graphics (SVGs) for digital icons or art. Vector graphics can be scaled to any size, and are compact. We show that a text-conditioned diffusion model trained on pixel representations of images can be used to generate SVG-exportable vector graphics. We do so without access to large datasets of captioned SVGs. By optimizing a differentiable vector graphics rasterizer, our method, VectorFusion, distills abstract semantic knowledge out of a pretrained diffusion model. Inspired by recent text-to-3D work, we learn an SVG consistent with a caption using Score Distillation Sampling. To accelerate generation and improve fidelity, VectorFusion also initializes from an image sample. Experiments show greater quality than prior work, and demonstrate a range of styles including pixel art and sketches. See our project webpage at https://ajayj.com/vectorfusion .

Sketch colorization plays an important role in animation and digital illustration production tasks. However, existing methods still meet problems in that text-guided methods fail to provide accurate color and style reference, hint-guided methods still involve manual operation, and image-referenced methods are prone to cause artifacts. To address these limitations, we propose a diffusion-based framework inspired by real-world animation production workflows. Our approach leverages the sketch as the spatial guidance and an RGB image as the color reference, and separately extracts foreground and background from the reference image with spatial masks. Particularly, we introduce a split cross-attention mechanism with LoRA (Low-Rank Adaptation) modules. They are trained separately with foreground and background regions to control the corresponding embeddings for keys and values in cross-attention. This design allows the diffusion model to integrate information from foreground and background independently, preventing interference and eliminating the spatial artifacts. During inference, we design switchable inference modes for diverse use scenarios by changing modules activated in the framework. Extensive qualitative and quantitative experiments, along with user studies, demonstrate our advantages over existing methods in generating high-qualigy artifact-free results with geometric mismatched references. Ablation studies further confirm the effectiveness of each component. Codes are available at https://github.com/ tellurion-kanata/colorizeDiffusion.

Current diffusion or flow-based generative models for 3D shapes divide to two: distilling pre-trained 2D image diffusion models, and training directly on 3D shapes. When training a diffusion or flow models on 3D shapes a crucial design choice is the shape representation. An effective shape representation needs to adhere three design principles: it should allow an efficient conversion of large 3D datasets to the representation form; it should provide a good tradeoff of approximation power versus number of parameters; and it should have a simple tensorial form that is compatible with existing powerful neural architectures. While standard 3D shape representations such as volumetric grids and point clouds do not adhere to all these principles simultaneously, we advocate in this paper a new representation that does. We introduce Mosaic-SDF (M-SDF): a simple 3D shape representation that approximates the Signed Distance Function (SDF) of a given shape by using a set of local grids spread near the shape's boundary. The M-SDF representation is fast to compute for each shape individually making it readily parallelizable; it is parameter efficient as it only covers the space around the shape's boundary; and it has a simple matrix form, compatible with Transformer-based architectures. We demonstrate the efficacy of the M-SDF representation by using it to train a 3D generative flow model including class-conditioned generation with the 3D Warehouse dataset, and text-to-3D generation using a dataset of about 600k caption-shape pairs.

While the image diffusion model has made significant strides in text-driven 3D content creation, it often falls short in accurately capturing the intended meaning of the text prompt, particularly with respect to direction information. This shortcoming gives rise to the Janus problem, where multi-faced 3D models are produced with the guidance of such diffusion models. In this paper, we present a robust pipeline for generating high-fidelity 3D content with orthogonal-view image guidance. Specifically, we introduce a novel 2D diffusion model that generates an image consisting of four orthogonal-view sub-images for the given text prompt. The 3D content is then created with this diffusion model, which enhances 3D consistency and provides strong structured semantic priors. This addresses the infamous Janus problem and significantly promotes generation efficiency. Additionally, we employ a progressive 3D synthesis strategy that results in substantial improvement in the quality of the created 3D contents. Both quantitative and qualitative evaluations show that our method demonstrates a significant improvement over previous text-to-3D techniques.

Story visualization has become a popular task where visual scenes are generated to depict a narrative across multiple panels. A central challenge in this setting is maintaining visual consistency, particularly in how characters and objects persist and evolve throughout the story. Despite recent advances in diffusion models, current approaches often fail to preserve key character attributes, leading to incoherent narratives. In this work, we propose a collaborative multi-agent framework that autonomously identifies, corrects, and refines inconsistencies across multi-panel story visualizations. The agents operate in an iterative loop, enabling fine-grained, panel-level updates without re-generating entire sequences. Our framework is model-agnostic and flexibly integrates with a variety of diffusion models, including rectified flow transformers such as Flux and latent diffusion models such as Stable Diffusion. Quantitative and qualitative experiments show that our method outperforms prior approaches in terms of multi-panel consistency.

In this paper we show that visual diffusion models can serve as effective geometric solvers: they can directly reason about geometric problems by working in pixel space. We first demonstrate this on the Inscribed Square Problem, a long-standing problem in geometry that asks whether every Jordan curve contains four points forming a square. We then extend the approach to two other well-known hard geometric problems: the Steiner Tree Problem and the Simple Polygon Problem. Our method treats each problem instance as an image and trains a standard visual diffusion model that transforms Gaussian noise into an image representing a valid approximate solution that closely matches the exact one. The model learns to transform noisy geometric structures into correct configurations, effectively recasting geometric reasoning as image generation. Unlike prior work that necessitates specialized architectures and domain-specific adaptations when applying diffusion to parametric geometric representations, we employ a standard visual diffusion model that operates on the visual representation of the problem. This simplicity highlights a surprising bridge between generative modeling and geometric problem solving. Beyond the specific problems studied here, our results point toward a broader paradigm: operating in image space provides a general and practical framework for approximating notoriously hard problems, and opens the door to tackling a far wider class of challenging geometric tasks.

Speculative decoding is a technique that accelerates the inference speed of autoregressive large language models (LLMs) by sampling from a faster, lower quality draft model. Traditionally, a fundamental characteristic of speculative decoding is that it is lossless with respect to the verifier distribution, guaranteeing speed without sacrificing quality. This differs from recently developed diffusion LLMs (dLLMs), which are notably able to achieve substantial speedups by degrading the quality of their outputs with less diffusion effort. Because diffusion models are able to sample faster than autoregressive models by generating tokens in parallel, they are considered strong candidates for draft models in speculative diffusion. While it is widely understood that diffusion models can sacrifice quality for speed, speculative decoding itself can also be generalized to generate lossy samples faster using more lenient acceptance criteria with respect to the verifier distribution. Presented with the two parameters of diffusion effort and speculative decoding leniency, this paper explores the full achievable Pareto frontier via joint variations of these parameters. Our experiments show that jointly varying diffusion effort and acceptance leniency can extend the speed-quality Pareto frontier over single step diffusion drafting.

Existing sketch generation methods often rely on image guidance and are largely limited to individual objects or simplified scenes, leaving text-guided complex scene sketching underexplored. We present SketchDirector, an agentic framework that mimics the human sketching workflow for automatic multi-concept scene sketching. Given a scene-level text prompt, SketchDirector first employs a large language model~(LLM) to decompose the scene into multiple draft assets, where each is represented by a set of Bézier curves. Then, an agentic reasoning loop iteratively plans and executes their spatial arrangement, guided by self-evolving memory. Finally, a detail refinement module leverages diffusion priors to enhance sketch quality while preserving geometric structure. To support future research and applications in multi-concept scene sketch generation, we further introduce the MCSketch8K dataset, comprising editable vector assets, compositional layouts, and object-level manipulation annotations. Extensive experiments show that SketchDirector outperforms state-of-the-art baselines in semantic and compositional quality while effectively preserving overall contour organization during refinement. The project page is: https://yiki77.github.io/SketchDirector/{https://yiki77.github.io/SketchDirector/}.

Diffusion models have established themselves as state-of-the-art generative models across various data modalities, including images and videos, due to their ability to accurately approximate complex data distributions. Unlike traditional generative approaches such as VAEs and GANs, diffusion models employ a progressive denoising process that transforms noise into meaningful data over multiple iterative steps. This gradual approach enhances their expressiveness and generation quality. Not only that, diffusion models have also been shown to extract meaningful representations from data while learning to generate samples. Despite their success, the application of diffusion models to graph-structured data remains relatively unexplored, primarily due to the discrete nature of graphs, which necessitates discrete diffusion processes distinct from the continuous methods used in other domains. In this work, we leverage the representational capabilities of diffusion models to learn meaningful embeddings for graph data. By training a discrete diffusion model within an autoencoder framework, we enable both effective autoencoding and representation learning tailored to the unique characteristics of graph-structured data. We only need the encoder at the end to extract representations. Our approach demonstrates the potential of discrete diffusion models to be used for graph representation learning.

Drafting an answer allows a reasoning model to reconsider each decision in the context of the others. Yet repeated diffusion denoising does not ensure that individually plausible token updates form a better answer together. We introduce Draft Refinement Language Models (DRLMs), which use a single denoiser to propose parallel revisions and evaluate a candidate draft. We train the denoiser to reconstruct every token from uniformly corrupted drafts, teaching both preservation and repair. Its predictions specify revisions directly, without a diffusion reverse transition. Evaluation requires a different use of these predictions: confidence in an existing token reflects both contextual support and evidence from observing the token itself. Using the known corruption process, we correct for this self-token evidence to estimate how well each token is supported by the prompt and the remaining draft. Aggregating these estimates yields a cavity energy computed in one forward pass, without an additional scoring model. Each round proposes a revision, reads the completed candidate in its revised context, and retains it only if its energy is lower. Across Countdown, Sudoku-Extreme, and Maze-Hard, our method outperforms autoregressive and discrete diffusion baselines. With 6M parameters, DRLM reaches 44.4% on Countdown-5 and 93.9% on Sudoku-Extreme. The results establish complete-draft parallel refinement as an effective alternative to reverse diffusion for complex reasoning.

Generating cognitive-aligned layered SVGs remains challenging due to existing methods' tendencies toward either oversimplified single-layer outputs or optimization-induced shape redundancies. We propose LayerTracer, a diffusion transformer based framework that bridges this gap by learning designers' layered SVG creation processes from a novel dataset of sequential design operations. Our approach operates in two phases: First, a text-conditioned DiT generates multi-phase rasterized construction blueprints that simulate human design workflows. Second, layer-wise vectorization with path deduplication produces clean, editable SVGs. For image vectorization, we introduce a conditional diffusion mechanism that encodes reference images into latent tokens, guiding hierarchical reconstruction while preserving structural integrity. Extensive experiments demonstrate LayerTracer's superior performance against optimization-based and neural baselines in both generation quality and editability, effectively aligning AI-generated vectors with professional design cognition.

Reinforcement learning fine-tuning has proven effective for steering generative diffusion models toward desired properties in image and molecular domains. Graph diffusion models have similarly been applied to combinatorial structure generation, including neural architecture search (NAS). However, neural architectures are directed acyclic graphs (DAGs) where edge direction encodes functional semantics such as data flow-information that existing graph diffusion methods, designed for undirected structures, discard. We propose Directed Graph Policy Optimization (DGPO), which extends reinforcement learning fine-tuning of discrete graph diffusion models to DAGs via topological node ordering and positional encoding. Validated on NAS-Bench-101 and NAS-Bench-201, DGPO matches the benchmark optimum on all three NAS-Bench-201 tasks (91.61%, 73.49%, 46.77%). The central finding is that the model learns transferable structural priors: pretrained on only 7% of the search space, it generates near-oracle architectures after fine-tuning, within 0.32 percentage points of the full-data model and extrapolating 7.3 percentage points beyond its training ceiling. Bidirectional control experiments confirm genuine reward-driven steering, with inverse optimization reaching near random-chance accuracy (9.5%). These results demonstrate that reinforcement learning-steered discrete diffusion, once extended to handle directionality, provides a controllable generative framework for directed combinatorial structures.

Parallel drafters such as DFlash and DSpark reduce proposal latency, but early mismatches limit how much of each block can be accepted. Retaining alternatives introduces parent states and candidate choices that reference-conditioned training does not directly supervise. We introduce TreeSpark, a unified training and inference framework extending the semi-autoregressive DSpark architecture. It constructs parent-conditioned candidate trees from one backbone pass and replays their expansion, pruning, and budgeted packing during training. Survival negative log-likelihood weights retained edges by reference-derived path mass, while a capped coverage hinge promotes target-important alternatives near local selection boundaries. Both objectives reuse reference-chain target distributions without additional target forward passes. We evaluate greedy decoding with Qwen3-4B and Qwen3-8B on nine general benchmarks and six writing domains. Across targets and suites, TreeSpark improves mean acceptance length over DSpark by 23.4% to 31.6% and mean single-request throughput by 15.1% to 25.0%. Batched Qwen3-4B throughput improves by 12.6% to 17.2%. At fixed attention capacity and inference policy, the proposed supervision further improves mean acceptance length by approximately 6.4% and mean system throughput by 4.2% to 5.0% on Qwen3-4B.

With the rising industrial attention to 3D virtual modeling technology, generating novel 3D content based on specified conditions (e.g. text) has become a hot issue. In this paper, we propose a new generative 3D modeling framework called Diffusion-SDF for the challenging task of text-to-shape synthesis. Previous approaches lack flexibility in both 3D data representation and shape generation, thereby failing to generate highly diversified 3D shapes conforming to the given text descriptions. To address this, we propose a SDF autoencoder together with the Voxelized Diffusion model to learn and generate representations for voxelized signed distance fields (SDFs) of 3D shapes. Specifically, we design a novel UinU-Net architecture that implants a local-focused inner network inside the standard U-Net architecture, which enables better reconstruction of patch-independent SDF representations. We extend our approach to further text-to-shape tasks including text-conditioned shape completion and manipulation. Experimental results show that Diffusion-SDF generates both higher quality and more diversified 3D shapes that conform well to given text descriptions when compared to previous approaches. Code is available at: https://github.com/ttlmh/Diffusion-SDF

Text-to-motion generation, which translates textual descriptions into human motions, faces the challenge that users often struggle to precisely convey their intended motions through text alone. To address this issue, this paper introduces DrawMotion, an efficient diffusion-based framework designed for multi-condition scenarios. DrawMotion generates motions based on both a conventional text condition and a novel hand-drawing condition, which provide semantic and spatial control over the generated motions, respectively. Specifically, we tackle the fine-grained motion generation task from three perspectives: 1) freehand drawing condition. To accurately capture users' intended motions without requiring tedious textual input, we develop an algorithm to automatically generate hand-drawn stickman sketches across different dataset formats; 2) multi-condition fusion. We propose a Multi-Condition Module (MCM) that is integrated into the diffusion process, enabling the model to exploit all possible condition combinations while reducing computational complexity compared to conventional approaches; and 3) training-free guidance. Notably, the MCM in DrawMotion ensures that its intermediate features lie in a continuous space, allowing classifier-guidance gradients to update the features and thereby aligning the generated motions with user intentions while preserving fidelity. Quantitative experiments and user studies demonstrate that the freehand drawing approach reduces user time by approximately 46.7% when generating motions aligned with their imagination. The code, demos, and relevant data are publicly available at https://github.com/InvertedForest/DrawMotion.

Autoregressive models (ARMs) are hindered by slow sequential inference. While masked diffusion models (MDMs) offer a parallel alternative, they suffer from critical drawbacks: high computational overhead from precluding Key-Value (KV) caching, and incoherent generation arising from learning dependencies over an intractable space of token combinations. To address these limitations, we introduce ReFusion, a novel masked diffusion model that achieves superior performance and efficiency by elevating parallel decoding from the token level to a higher slot level, where each slot is a fixed-length, contiguous sub-sequence. This is achieved through an iterative ``plan-and-infill'' decoding process: a diffusion-based planning step first identifies a set of weakly dependent slots, and an autoregressive infilling step then decodes these selected slots in parallel. The slot-based design simultaneously unlocks full KV cache reuse with a unified causal framework and reduces the learning complexity from the token combination space to a manageable slot-level permutation space. Extensive experiments on seven diverse benchmarks show that ReFusion not only overwhelmingly surpasses prior MDMs with 34% performance gains and an over 18times speedup on average, but also bridges the performance gap to strong ARMs while maintaining a 2.33times average speedup.

Precise and controllable image editing is a challenging task that has attracted significant attention. Recently, DragGAN enables an interactive point-based image editing framework and achieves impressive editing results with pixel-level precision. However, since this method is based on generative adversarial networks (GAN), its generality is upper-bounded by the capacity of the pre-trained GAN models. In this work, we extend such an editing framework to diffusion models and propose DragDiffusion. By leveraging large-scale pretrained diffusion models, we greatly improve the applicability of interactive point-based editing in real world scenarios. While most existing diffusion-based image editing methods work on text embeddings, DragDiffusion optimizes the diffusion latent to achieve precise spatial control. Although diffusion models generate images in an iterative manner, we empirically show that optimizing diffusion latent at one single step suffices to generate coherent results, enabling DragDiffusion to complete high-quality editing efficiently. Extensive experiments across a wide range of challenging cases (e.g., multi-objects, diverse object categories, various styles, etc.) demonstrate the versatility and generality of DragDiffusion.

Diffusion models have achieved remarkable performance in generative modeling, yet their theoretical foundations are often intricate, and the gap between mathematical formulations in papers and practical open-source implementations can be difficult to bridge. Existing tutorials primarily focus on deriving equations, offering limited guidance on how diffusion models actually operate in code. To address this, we present a concise implementation of approximately 300 lines that explains diffusion models from a code-execution perspective. Our minimal example preserves the essential components -- including forward diffusion, reverse sampling, the noise-prediction network, and the training loop -- while removing unnecessary engineering details. This technical report aims to provide researchers with a clear, implementation-first understanding of how diffusion models work in practice and how code and theory correspond. Our code and pre-trained models are available at: https://github.com/disanda/GM/tree/main/DDPM-DDIM-ClassifierFree.

Sketching is inherently sequential: strokes are drawn progressively to explore and refine ideas. Yet most generative approaches treat sketches as static images, ignoring the temporal process underlying creative exploration. Modeling this sequential structure remains challenging: prior methods either rely on large-scale human-drawn datasets with limited diversity, or use large language models (LLMs) to produce drawing instructions, often at the cost of visual fidelity. We present VideoSketcher, a method for generating high-quality sketching processes by adapting pretrained text-to-video diffusion models to the sparse, continuous nature of sketch formation. Our key insight is that LLMs and video diffusion models offer complementary strengths: LLMs act as semantic planners that decompose concepts into step-by-step instructions, while video diffusion models serve as powerful "renderers" that translate them into temporally coherent sketch sequences. We introduce a two-stage fine-tuning strategy that decouples temporal structure from visual appearance: stroke ordering is learned from synthetic shape compositions, while style is distilled from as few as seven hand-drawn examples. Despite minimal supervision, our method can generate diverse, high-quality sequential sketches that faithfully follow specified drawing orders. Our framework naturally extends to brush style control and autoregressive generation, supporting artistic applications.

Layout design is an important task in various design fields, including user interface, document, and graphic design. As this task requires tedious manual effort by designers, prior works have attempted to automate this process using generative models, but commonly fell short of providing intuitive user controls and achieving design objectives. In this paper, we build a conditional latent diffusion model, PLay, that generates parametrically conditioned layouts in vector graphic space from user-specified guidelines, which are commonly used by designers for representing their design intents in current practices. Our method outperforms prior works across three datasets on metrics including FID and FD-VG, and in user study. Moreover, it brings a novel and interactive experience to professional layout design processes.

Current large-scale diffusion models represent a giant leap forward in conditional image synthesis, capable of interpreting diverse cues like text, human poses, and edges. However, their reliance on substantial computational resources and extensive data collection remains a bottleneck. On the other hand, the integration of existing diffusion models, each specialized for different controls and operating in unique latent spaces, poses a challenge due to incompatible image resolutions and latent space embedding structures, hindering their joint use. Addressing these constraints, we present "PanGu-Draw", a novel latent diffusion model designed for resource-efficient text-to-image synthesis that adeptly accommodates multiple control signals. We first propose a resource-efficient Time-Decoupling Training Strategy, which splits the monolithic text-to-image model into structure and texture generators. Each generator is trained using a regimen that maximizes data utilization and computational efficiency, cutting data preparation by 48% and reducing training resources by 51%. Secondly, we introduce "Coop-Diffusion", an algorithm that enables the cooperative use of various pre-trained diffusion models with different latent spaces and predefined resolutions within a unified denoising process. This allows for multi-control image synthesis at arbitrary resolutions without the necessity for additional data or retraining. Empirical validations of Pangu-Draw show its exceptional prowess in text-to-image and multi-control image generation, suggesting a promising direction for future model training efficiencies and generation versatility. The largest 5B T2I PanGu-Draw model is released on the Ascend platform. Project page: https://pangu-draw.github.io

In this report, we introduce UltraShape 1.0, a scalable 3D diffusion framework for high-fidelity 3D geometry generation. The proposed approach adopts a two-stage generation pipeline: a coarse global structure is first synthesized and then refined to produce detailed, high-quality geometry. To support reliable 3D generation, we develop a comprehensive data processing pipeline that includes a novel watertight processing method and high-quality data filtering. This pipeline improves the geometric quality of publicly available 3D datasets by removing low-quality samples, filling holes, and thickening thin structures, while preserving fine-grained geometric details. To enable fine-grained geometry refinement, we decouple spatial localization from geometric detail synthesis in the diffusion process. We achieve this by performing voxel-based refinement at fixed spatial locations, where voxel queries derived from coarse geometry provide explicit positional anchors encoded via RoPE, allowing the diffusion model to focus on synthesizing local geometric details within a reduced, structured solution space. Our model is trained exclusively on publicly available 3D datasets, achieving strong geometric quality despite limited training resources. Extensive evaluations demonstrate that UltraShape 1.0 performs competitively with existing open-source methods in both data processing quality and geometry generation. All code and trained models will be released to support future research.

Generating realistic 3D scenes is challenging due to the complexity of room layouts and object geometries.We propose a sketch based knowledge enhanced diffusion architecture (SEK) for generating customized, diverse, and plausible 3D scenes. SEK conditions the denoising process with a hand-drawn sketch of the target scene and cues from an object relationship knowledge base. We first construct an external knowledge base containing object relationships and then leverage knowledge enhanced graph reasoning to assist our model in understanding hand-drawn sketches. A scene is represented as a combination of 3D objects and their relationships, and then incrementally diffused to reach a Gaussian distribution.We propose a 3D denoising scene transformer that learns to reverse the diffusion process, conditioned by a hand-drawn sketch along with knowledge cues, to regressively generate the scene including the 3D object instances as well as their layout. Experiments on the 3D-FRONT dataset show that our model improves FID, CKL by 17.41%, 37.18% in 3D scene generation and FID, KID by 19.12%, 20.06% in 3D scene completion compared to the nearest competitor DiffuScene.

Generating images from hand-drawings is a crucial and fundamental task in content creation. The translation is challenging due to the infinite possibilities and the diverse expectations of users. However, traditional methods are often limited by the availability of training data. Therefore, VisioBlend, a unified framework supporting three-dimensional control over image synthesis from sketches and strokes based on diffusion models, is proposed. It enables users to decide the level of faithfulness to the input strokes and sketches. VisioBlend achieves state-of-the-art performance in terms of realism and flexibility, enabling various applications in image synthesis from sketches and strokes. It solves the problem of data availability by synthesizing new data points from hand-drawn sketches and strokes, enriching the dataset and enabling more robust and diverse image synthesis. This work showcases the power of diffusion models in image creation, offering a user-friendly and versatile approach for turning artistic visions into reality.

Autoregressive OCR vision-language models accurately convert document images into text and structured markup, but require one sequential decoding step per output token, limiting inference speed. Unlike open-ended text generation, OCR outputs are strongly grounded in the input image, making diffusion-based parallel generation promising. However, when several tokens are predicted in one diffusion step, each is predicted before the others are known. Committing them directly can therefore introduce errors. We therefore introduce GravityOCR, a parameter-shared AR-block-diffusion model jointly trained for parallel drafting and causal AR verification. Verifying drafts before commitment lets the model commit multiple output tokens per round without a separate drafting network. The causal AR path also enables GRPO with sequence- and structure-level OCR rewards, avoiding diffusion-trajectory likelihood estimation while updating the shared drafter parameters. On OmniDocBench v1.6, AR-path GRPO improves the Overall score from 94.92 to 95.16 without reducing diffusion drafting efficiency, while the final model remains close to the original GLM-OCR score of 95.48. In an SGLang serving deployment, GravityOCR commits an average of 9.7 output tokens per forward pass and achieves a 3.94times decode-only speedup on region crops and a 1.32times end-to-end page-processing speedup over AR decoding.

Inference with modern Large Language Models (LLMs) is expensive and time-consuming, and speculative sampling has proven to be an effective solution. Most speculative sampling methods such as EAGLE use a static draft tree, implicitly assuming that the acceptance rate of draft tokens depends only on their position. Interestingly, we found that the acceptance rate of draft tokens is also context-dependent. In this paper, building upon EAGLE, we propose EAGLE-2, which introduces a new technique of context-aware dynamic draft tree into drafting modeling. This improvement leverages the fact that the draft model of EAGLE is well-calibrated: the confidence scores from the draft model approximate acceptance rates with small errors. We conducted extensive evaluations on three series of LLMs and six tasks, with EAGLE-2 achieving speedup ratios 3.05x-4.26x, which is 20%-40% faster than EAGLE-1. EAGLE-2 also ensures that the distribution of the generated text remains unchanged, making it a lossless acceleration algorithm.

Generation of graphs is a major challenge for real-world tasks that require understanding the complex nature of their non-Euclidean structures. Although diffusion models have achieved notable success in graph generation recently, they are ill-suited for modeling the topological properties of graphs since learning to denoise the noisy samples does not explicitly learn the graph structures to be generated. To tackle this limitation, we propose a generative framework that models the topology of graphs by explicitly learning the final graph structures of the diffusion process. Specifically, we design the generative process as a mixture of endpoint-conditioned diffusion processes which is driven toward the predicted graph that results in rapid convergence. We further introduce a simple parameterization of the mixture process and develop an objective for learning the final graph structure, which enables maximum likelihood training. Through extensive experimental validation on general graph and 2D/3D molecule generation tasks, we show that our method outperforms previous generative models, generating graphs with correct topology with both continuous (e.g. 3D coordinates) and discrete (e.g. atom types) features. Our code is available at https://github.com/harryjo97/GruM.

We propose a diffusion-based approach for Text-to-Image (T2I) generation with interactive 3D layout control. Layout control has been widely studied to alleviate the shortcomings of T2I diffusion models in understanding objects' placement and relationships from text descriptions. Nevertheless, existing approaches for layout control are limited to 2D layouts, require the user to provide a static layout beforehand, and fail to preserve generated images under layout changes. This makes these approaches unsuitable for applications that require 3D object-wise control and iterative refinements, e.g., interior design and complex scene generation. To this end, we leverage the recent advancements in depth-conditioned T2I models and propose a novel approach for interactive 3D layout control. We replace the traditional 2D boxes used in layout control with 3D boxes. Furthermore, we revamp the T2I task as a multi-stage generation process, where at each stage, the user can insert, change, and move an object in 3D while preserving objects from earlier stages. We achieve this through our proposed Dynamic Self-Attention (DSA) module and the consistent 3D object translation strategy. Experiments show that our approach can generate complicated scenes based on 3D layouts, boosting the object generation success rate over the standard depth-conditioned T2I methods by 2x. Moreover, it outperforms other methods in comparison in preserving objects under layout changes. Project Page: https://abdo-eldesokey.github.io/build-a-scene/

Creating high quality and realistic materials in computer graphics is a challenging and time-consuming task, which requires great expertise. In this paper, we present MatFuse, a novel unified approach that harnesses the generative power of diffusion models (DM) to simplify the creation of SVBRDF maps. Our DM-based pipeline integrates multiple sources of conditioning, such as color palettes, sketches, and pictures, enabling fine-grained control and flexibility in material synthesis. This design allows for the combination of diverse information sources (e.g., sketch + image embedding), enhancing creative possibilities in line with the principle of compositionality. We demonstrate the generative capabilities of the proposed method under various conditioning settings; on the SVBRDF estimation task, we show that our method yields performance comparable to state-of-the-art approaches, both qualitatively and quantitatively.

In recent times, the generation of 3D assets from text prompts has shown impressive results. Both 2D and 3D diffusion models can generate decent 3D objects based on prompts. 3D diffusion models have good 3D consistency, but their quality and generalization are limited as trainable 3D data is expensive and hard to obtain. 2D diffusion models enjoy strong abilities of generalization and fine generation, but the 3D consistency is hard to guarantee. This paper attempts to bridge the power from the two types of diffusion models via the recent explicit and efficient 3D Gaussian splatting representation. A fast 3D generation framework, named as \name, is proposed, where the 3D diffusion model provides point cloud priors for initialization and the 2D diffusion model enriches the geometry and appearance. Operations of noisy point growing and color perturbation are introduced to enhance the initialized Gaussians. Our \name can generate a high-quality 3D instance within 25 minutes on one GPU, much faster than previous methods, while the generated instances can be directly rendered in real time. Demos and code are available at https://taoranyi.com/gaussiandreamer/.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

This paper presents an end-to-end neural architecture based on Diffusion Models for spatial puzzle solving, particularly jigsaw puzzle and room arrangement tasks. In the latter task, for instance, the proposed system "PuzzleFusion" takes a set of room layouts as polygonal curves in the top-down view and aligns the room layout pieces by estimating their 2D translations and rotations, akin to solving the jigsaw puzzle of room layouts. A surprising discovery of the paper is that the simple use of a Diffusion Model effectively solves these challenging spatial puzzle tasks as a conditional generation process. To enable learning of an end-to-end neural system, the paper introduces new datasets with ground-truth arrangements: 1) 2D Voronoi jigsaw dataset, a synthetic one where pieces are generated by Voronoi diagram of 2D pointset; and 2) MagicPlan dataset, a real one offered by MagicPlan from its production pipeline, where pieces are room layouts constructed by augmented reality App by real-estate consumers. The qualitative and quantitative evaluations demonstrate that our approach outperforms the competing methods by significant margins in all the tasks.

Autoregressive (AR) language models generate tokens sequentially, so generating long outputs is costly. Speculative decoding mitigates this by using a lightweight drafter to propose multiple tokens for the target AR model to verify in parallel, while a diffusion-based drafter can produce an entire draft block in one forward pass. In models with AR and diffusion modes, one network both drafts and verifies, but drafting still waits for verification, so the standard schedule needs two sequential model calls per iteration. Existing one-call schedules avoid the wait but incur input size quadratic in the speculative width. Motivated by this efficiency bottleneck, we introduce Packed-SS, a self-speculative decoding schedule that verifies and drafts in a single model call with input size linear in the speculative width, while preserving the target model's distribution. The key idea is to let the diffusion drafter run one call ahead: while verifying the current draft, the model simultaneously constructs the next draft from an older verified prefix and keeps its unresolved suffix for the next iteration. Under a mild monotonicity assumption on the drafter, we further show that Packed-SS requires no more model calls than the standard two-call decoding in the greedy setting. Experiments on Nemotron 3B/8B and SetDLM 1.7B show higher throughput and lower mean wall time than both baselines under greedy decoding.

Creative image generation has emerged as a compelling area of research, driven by the need to produce novel and high-quality images that expand the boundaries of imagination. In this work, we propose a novel framework for creative generation using diffusion models, where creativity is associated with the inverse probability of an image's existence in the CLIP embedding space. Unlike prior approaches that rely on a manual blending of concepts or exclusion of subcategories, our method calculates the probability distribution of generated images and drives it towards low-probability regions to produce rare, imaginative, and visually captivating outputs. We also introduce pullback mechanisms, achieving high creativity without sacrificing visual fidelity. Extensive experiments on text-to-image diffusion models demonstrate the effectiveness and efficiency of our creative generation framework, showcasing its ability to produce unique, novel, and thought-provoking images. This work provides a new perspective on creativity in generative models, offering a principled method to foster innovation in visual content synthesis.

Speculative decoding, in which a lightweight draft model first generates a draft sequence that is then verified in parallel by the target model, has become a prevalent paradigm for accelerating large language model inference. Recent work such as DFlash further boosts drafting efficiency by leveraging diffusion drafters, whose parallel denoising mechanism enables draft generation in a single forward pass. In this work, we uncover a central pitfall of diffusion drafters: bidirectional attention is a double-edged sword. On one hand, it endows the model with parallel generation and global contextual modeling capabilities; on the other hand, this inherent global dependency introduces high variance at both the domain-level and the token-level: acceptance rates fluctuate substantially across different domains, and draft token quality also varies heterogeneously at different token positions. To tackle this issue, we propose AdaFlash framework, comprising two components: (i) an on-policy distillation (OPD) algorithm with reverse-KL divergence tailored for diffusion drafters, bringing stable convergence and effectively reducing domain-level variance; and (ii) an adaptive length head that dynamically adjusts the candidate sequence length on the fly, substantially lowering the verification cost of the target model and handling token-level variance. Experiments demonstrate that AdaFlash consistently improves speedup rate during deployment, with especially significant gains in high-concurrency scenarios, achieving up to approximately 66% higher throughput than previous state-of-the-art methods.

Recent advances in vision-language models have facilitated progress in sketch generation. However, existing specialized methods primarily focus on generic synthesis and lack mechanisms for precise control over sketch styles. In this work, we propose a training-free framework based on diffusion models that enables explicit style guidance via textual prompts and referenced style sketches. Unlike previous style transfer methods that overwrite key and value matrices in self-attention, we incorporate the reference features as auxiliary information with linear smoothing and leverage a style-content guidance mechanism. This design effectively reduces content leakage from reference sketches and enhances synthesis quality, especially in cases with low structural similarity between reference and target sketches. Furthermore, we extend our framework to support controllable multi-style generation by integrating features from multiple reference sketches, coordinated via a joint AdaIN module. Extensive experiments demonstrate that our approach achieves high-quality sketch generation with accurate style alignment and improved flexibility in style control. The official implementation of M3S is available at https://github.com/CMACH508/M3S.

Diffusion models have achieved impressive advancements in various vision tasks. However, these gains often rely on increasing model size, which escalates computational complexity and memory demands, complicating deployment, raising inference costs, and causing environmental impact. While some studies have explored pruning techniques to improve the memory efficiency of diffusion models, most existing methods require extensive retraining to retain the model performance. Retraining a modern large diffusion model is extremely costly and resource-intensive, which limits the practicality of these methods. In this work, we achieve low-cost diffusion pruning without retraining by proposing a model-agnostic structural pruning framework for diffusion models that learns a differentiable mask to sparsify the model. To ensure effective pruning that preserves the quality of the final denoised latent, we design a novel end-to-end pruning objective that spans the entire diffusion process. As end-to-end pruning is memory-intensive, we further propose time step gradient checkpointing, a technique that significantly reduces memory usage during optimization, enabling end-to-end pruning within a limited memory budget. Results on state-of-the-art U-Net diffusion models SDXL and diffusion transformers (FLUX) demonstrate that our method can effectively prune up to 20% parameters with minimal perceptible performance degradation, and notably, without the need for model retraining. We also showcase that our method can still prune on top of time step distilled diffusion models.

Diffusion models have emerged as the state-of-the-art for image generation, among other tasks. Here, we present an efficient diffusion-based model for 3D-aware generation of neural fields. Our approach pre-processes training data, such as ShapeNet meshes, by converting them to continuous occupancy fields and factoring them into a set of axis-aligned triplane feature representations. Thus, our 3D training scenes are all represented by 2D feature planes, and we can directly train existing 2D diffusion models on these representations to generate 3D neural fields with high quality and diversity, outperforming alternative approaches to 3D-aware generation. Our approach requires essential modifications to existing triplane factorization pipelines to make the resulting features easy to learn for the diffusion model. We demonstrate state-of-the-art results on 3D generation on several object classes from ShapeNet.

Diffusion language models hold the promise of fast parallel generation, while autoregressive (AR) models typically excel in quality due to their causal structure aligning naturally with language modeling. This raises a fundamental question: can we achieve a synergy with high throughput, higher GPU utilization, and AR level quality? Existing methods fail to effectively balance these two aspects, either prioritizing AR using a weaker model for sequential drafting (speculative decoding), leading to lower drafting efficiency, or using some form of left-to-right (AR-like) decoding logic for diffusion, which still suffers from quality degradation and forfeits its potential parallelizability. We introduce TiDAR, a sequence-level hybrid architecture that drafts tokens (Thinking) in Diffusion and samples final outputs (Talking) AutoRegressively - all within a single forward pass using specially designed structured attention masks. This design exploits the free GPU compute density, achieving a strong balance between drafting and verification capacity. Moreover, TiDAR is designed to be serving-friendly (low overhead) as a standalone model. We extensively evaluate TiDAR against AR models, speculative decoding, and diffusion variants across generative and likelihood tasks at 1.5B and 8B scales. Thanks to the parallel drafting and sampling as well as exact KV cache support, TiDAR outperforms speculative decoding in measured throughput and surpasses diffusion models like Dream and Llada in both efficiency and quality. Most notably, TiDAR is the first architecture to close the quality gap with AR models while delivering 4.71x to 5.91x more tokens per second.

Despite the ability of existing large-scale text-to-image (T2I) models to generate high-quality images from detailed textual descriptions, they often lack the ability to precisely edit the generated or real images. In this paper, we propose a novel image editing method, DragonDiffusion, enabling Drag-style manipulation on Diffusion models. Specifically, we construct classifier guidance based on the strong correspondence of intermediate features in the diffusion model. It can transform the editing signals into gradients via feature correspondence loss to modify the intermediate representation of the diffusion model. Based on this guidance strategy, we also build a multi-scale guidance to consider both semantic and geometric alignment. Moreover, a cross-branch self-attention is added to maintain the consistency between the original image and the editing result. Our method, through an efficient design, achieves various editing modes for the generated or real images, such as object moving, object resizing, object appearance replacement, and content dragging. It is worth noting that all editing and content preservation signals come from the image itself, and the model does not require fine-tuning or additional modules. Our source code will be available at https://github.com/MC-E/DragonDiffusion.

For decades, procedural worlds have been built on procedural noise functions such as Perlin noise, which are fast and infinite, yet fundamentally limited in realism and large-scale coherence. We introduce Terrain Diffusion, an AI-era successor to Perlin noise that bridges the fidelity of diffusion models with the properties that made procedural noise indispensable: seamless infinite extent, seed-consistency, and constant-time random access. At its core is InfiniteDiffusion, a novel algorithm for infinite generation, enabling seamless, real-time synthesis of boundless landscapes. A hierarchical stack of diffusion models couples planetary context with local detail, while a compact Laplacian encoding stabilizes outputs across Earth-scale dynamic ranges. An open-source infinite-tensor framework supports constant-memory manipulation of unbounded tensors, and few-step consistency distillation enables efficient generation. Together, these components establish diffusion models as a practical foundation for procedural world generation, capable of synthesizing entire planets coherently, controllably, and without limits.

We present a diffusion-based model for 3D-aware generative novel view synthesis from as few as a single input image. Our model samples from the distribution of possible renderings consistent with the input and, even in the presence of ambiguity, is capable of rendering diverse and plausible novel views. To achieve this, our method makes use of existing 2D diffusion backbones but, crucially, incorporates geometry priors in the form of a 3D feature volume. This latent feature field captures the distribution over possible scene representations and improves our method's ability to generate view-consistent novel renderings. In addition to generating novel views, our method has the ability to autoregressively synthesize 3D-consistent sequences. We demonstrate state-of-the-art results on synthetic renderings and room-scale scenes; we also show compelling results for challenging, real-world objects.

Recent advancements in text-to-image diffusion models have demonstrated remarkable success, yet they often struggle to fully capture the user's intent. Existing approaches using textual inputs combined with bounding boxes or region masks fall short in providing precise spatial guidance, often leading to misaligned or unintended object orientation. To address these limitations, we propose Scribble-Guided Diffusion (ScribbleDiff), a training-free approach that utilizes simple user-provided scribbles as visual prompts to guide image generation. However, incorporating scribbles into diffusion models presents challenges due to their sparse and thin nature, making it difficult to ensure accurate orientation alignment. To overcome these challenges, we introduce moment alignment and scribble propagation, which allow for more effective and flexible alignment between generated images and scribble inputs. Experimental results on the PASCAL-Scribble dataset demonstrate significant improvements in spatial control and consistency, showcasing the effectiveness of scribble-based guidance in diffusion models. Our code is available at https://github.com/kaist-cvml-lab/scribble-diffusion.

Diffusion models have emerged as a powerful new family of deep generative models with record-breaking performance in many applications, including image synthesis, video generation, and molecule design. In this survey, we provide an overview of the rapidly expanding body of work on diffusion models, categorizing the research into three key areas: efficient sampling, improved likelihood estimation, and handling data with special structures. We also discuss the potential for combining diffusion models with other generative models for enhanced results. We further review the wide-ranging applications of diffusion models in fields spanning from computer vision, natural language generation, temporal data modeling, to interdisciplinary applications in other scientific disciplines. This survey aims to provide a contextualized, in-depth look at the state of diffusion models, identifying the key areas of focus and pointing to potential areas for further exploration. Github: https://github.com/YangLing0818/Diffusion-Models-Papers-Survey-Taxonomy.

Tabular data is more challenging to generate than text and images, due to its heterogeneous features and much lower sample sizes. On this task, diffusion-based models are the current state-of-the-art (SotA) model class, achieving almost perfect performance on commonly used benchmarks. In this paper, we question the perception of progress for tabular data generation. First, we highlight the limitations of current protocols to evaluate the fidelity of generated data, and advocate for alternative ones. Next, we revisit a simple baseline -- hierarchical mixture models in the form of deep probabilistic circuits (PCs) -- which delivers competitive or superior performance to SotA models for a fraction of the cost. PCs are the generative counterpart of decision forests, and as such can natively handle heterogeneous data as well as deliver tractable probabilistic generation and inference. Finally, in a rigorous empirical analysis we show that the apparent saturation of progress for SotA models is largely due to the use of inadequate metrics. As such, we highlight that there is still much to be done to generate realistic tabular data. Code available at https://github.com/april-tools/tabpc.

Despite the remarkable success of diffusion models in text-to-image generation, their effectiveness in grounded visual editing and compositional control remains challenging. Motivated by advances in self-supervised learning and in-context generative modeling, we propose a series of simple yet powerful design choices that significantly enhance diffusion model capacity for structured, controllable generation and editing. We introduce Masking-Augmented Diffusion with Inference-Time Scaling (MADI), a framework that improves the editability, compositionality and controllability of diffusion models through two core innovations. First, we introduce Masking-Augmented gaussian Diffusion (MAgD), a novel training strategy with dual corruption process which combines standard denoising score matching and masked reconstruction by masking noisy input from forward process. MAgD encourages the model to learn discriminative and compositional visual representations, thus enabling localized and structure-aware editing. Second, we introduce an inference-time capacity scaling mechanism based on Pause Tokens, which act as special placeholders inserted into the prompt for increasing computational capacity at inference time. Our findings show that adopting expressive and dense prompts during training further enhances performance, particularly for MAgD. Together, these contributions in MADI substantially enhance the editability of diffusion models, paving the way toward their integration into more general-purpose, in-context generative diffusion architectures.

Efficient computation of graph diffusion equations (GDEs), such as Personalized PageRank, Katz centrality, and the Heat kernel, is crucial for clustering, training neural networks, and many other graph-related problems. Standard iterative methods require accessing the whole graph per iteration, making them time-consuming for large-scale graphs. While existing local solvers approximate diffusion vectors through heuristic local updates, they often operate sequentially and are typically designed for specific diffusion types, limiting their applicability. Given that diffusion vectors are highly localizable, as measured by the participation ratio, this paper introduces a novel framework for approximately solving GDEs using a local diffusion process. This framework reveals the suboptimality of existing local solvers. Furthermore, our approach effectively localizes standard iterative solvers by designing simple and provably sublinear time algorithms. These new local solvers are highly parallelizable, making them well-suited for implementation on GPUs. We demonstrate the effectiveness of our framework in quickly obtaining approximate diffusion vectors, achieving up to a hundred-fold speed improvement, and its applicability to large-scale dynamic graphs. Our framework could also facilitate more efficient local message-passing mechanisms for GNNs.

Recent advances in generative modeling with diffusion processes (DPs) enabled breakthroughs in image synthesis. Despite impressive image quality, these models have various prompt compliance problems, including low recall in generating multiple objects, difficulty in generating text in images, and meeting constraints like object locations and pose. For fine-grained editing and manipulation, they also require fine-grained semantic or instance maps that are tedious to produce manually. While prompt compliance can be enhanced by addition of loss functions at inference, this is time consuming and does not scale to complex scenes. To overcome these limitations, this work introduces a new family of Factor Graph Diffusion Models (FG-DMs) that models the joint distribution of images and conditioning variables, such as semantic, sketch, depth or normal maps via a factor graph decomposition. This joint structure has several advantages, including support for efficient sampling based prompt compliance schemes, which produce images of high object recall, semi-automated fine-grained editing, text-based editing of conditions with noise inversion, explainability at intermediate levels, ability to produce labeled datasets for the training of downstream models such as segmentation or depth, training with missing data, and continual learning where new conditioning variables can be added with minimal or no modifications to the existing structure. We propose an implementation of FG-DMs by adapting a pre-trained Stable Diffusion (SD) model to implement all FG-DM factors, using only COCO dataset, and show that it is effective in generating images with 15\% higher recall than SD while retaining its generalization ability. We introduce an attention distillation loss that encourages consistency among the attention maps of all factors, improving the fidelity of the generated conditions and image.

Text-to-image models are showcasing the impressive ability to create high-quality and diverse generative images. Nevertheless, the transition from freehand sketches to complex scene images remains challenging using diffusion models. In this study, we propose a novel sketch-guided scene image generation framework, decomposing the task of scene image scene generation from sketch inputs into object-level cross-domain generation and scene-level image construction. We employ pre-trained diffusion models to convert each single object drawing into an image of the object, inferring additional details while maintaining the sparse sketch structure. In order to maintain the conceptual fidelity of the foreground during scene generation, we invert the visual features of object images into identity embeddings for scene generation. In scene-level image construction, we generate the latent representation of the scene image using the separated background prompts, and then blend the generated foreground objects according to the layout of the sketch input. To ensure the foreground objects' details remain unchanged while naturally composing the scene image, we infer the scene image on the blended latent representation using a global prompt that includes the trained identity tokens. Through qualitative and quantitative experiments, we demonstrate the ability of the proposed approach to generate scene images from hand-drawn sketches surpasses the state-of-the-art approaches.

In this work, we present a novel framework built to simplify 3D asset generation for amateur users. To enable interactive generation, our method supports a variety of input modalities that can be easily provided by a human, including images, text, partially observed shapes and combinations of these, further allowing to adjust the strength of each input. At the core of our approach is an encoder-decoder, compressing 3D shapes into a compact latent representation, upon which a diffusion model is learned. To enable a variety of multi-modal inputs, we employ task-specific encoders with dropout followed by a cross-attention mechanism. Due to its flexibility, our model naturally supports a variety of tasks, outperforming prior works on shape completion, image-based 3D reconstruction, and text-to-3D. Most interestingly, our model can combine all these tasks into one swiss-army-knife tool, enabling the user to perform shape generation using incomplete shapes, images, and textual descriptions at the same time, providing the relative weights for each input and facilitating interactivity. Despite our approach being shape-only, we further show an efficient method to texture the generated shape using large-scale text-to-image models.

Speculative decoding accelerates large language model inference through parallel verification of tokens proposed by a drafter. Diffusion drafters further parallelize proposal generation, but greater proposal capacity or higher mean accepted tokens (MAT) need not yield higher throughput. Because verification accepts only a consecutive prefix, early rejections can render later correct predictions ineffective, limiting MAT gains, while even higher MAT may not improve throughput if per-round latency increases. We introduce DScout, which uses two complementary factorizations to guide diffusion drafter training and inference for higher throughput. For training, DScout factorizes position-wise loss into inclusion, weighting, and prediction loss. This guides the design and combination of mixed-horizon training, intra-block unmasking, and acceptance-weighted loss to align supervision with prefix acceptance and improve MAT. For inference, DScout factorizes throughput as the ratio of MAT to per-round latency, guiding target-conditioning depth, drafter depth, and inference block size selection to identify a high-throughput configuration for each workload. Across six benchmarks, DScout achieves 3.84times and 4.14times mean speedups over autoregressive decoding on Qwen3-4B and Qwen3-8B, respectively, improving mean speedup over the state-of-the-art baseline by 9.1% and 7.1%. Across models and concurrency settings, our inference configuration policy provides up to 9.75% additional mean speedup over DScout's fixed configuration.

This paper introduces StructDiff, a generative framework based on a single-scale diffusion model for single-image generation. Single-image generation aims to synthesize diverse samples with similar visual content to the source image by capturing its internal statistics, without relying on external data. However, existing methods often struggle to preserve the structural layout, especially for images with large rigid objects or strict spatial constraints. Moreover, most approaches lack spatial controllability, making it difficult to guide the structure or placement of generated content. To address these challenges, StructDiff introduces an adaptive receptive field module to maintain both global and local distributions. Building on this foundation, StructDiff incorporates 3D positional encoding (PE) as a spatial prior, allowing flexible control over positions, scale, and local details of generated objects. To our knowledge, this spatial control capability represents the first exploration of PE-based manipulation in single-image generation. Furthermore, we propose a novel evaluation criterion for single-image generation based on large language models (LLMs). This criterion specifically addresses the limitations of existing objective metrics and the high labor costs associated with user studies. StructDiff also demonstrates broad applicability across downstream tasks, such as text-guided image generation, image editing, outpainting, and paint-to-image synthesis. Extensive experiments demonstrate that StructDiff outperforms existing methods in structural consistency, visual quality, and spatial controllability. The project page is available at https://butter-crab.github.io/StructDiff/.

Even though trained mainly on images, we discover that pretrained diffusion models show impressive power in guiding sketch synthesis. In this paper, we present DiffSketcher, an innovative algorithm that creates vectorized free-hand sketches using natural language input. DiffSketcher is developed based on a pre-trained text-to-image diffusion model. It performs the task by directly optimizing a set of Bezier curves with an extended version of the score distillation sampling (SDS) loss, which allows us to use a raster-level diffusion model as a prior for optimizing a parametric vectorized sketch generator. Furthermore, we explore attention maps embedded in the diffusion model for effective stroke initialization to speed up the generation process. The generated sketches demonstrate multiple levels of abstraction while maintaining recognizability, underlying structure, and essential visual details of the subject drawn. Our experiments show that DiffSketcher achieves greater quality than prior work.

The field of visual computing is rapidly advancing due to the emergence of generative artificial intelligence (AI), which unlocks unprecedented capabilities for the generation, editing, and reconstruction of images, videos, and 3D scenes. In these domains, diffusion models are the generative AI architecture of choice. Within the last year alone, the literature on diffusion-based tools and applications has seen exponential growth and relevant papers are published across the computer graphics, computer vision, and AI communities with new works appearing daily on arXiv. This rapid growth of the field makes it difficult to keep up with all recent developments. The goal of this state-of-the-art report (STAR) is to introduce the basic mathematical concepts of diffusion models, implementation details and design choices of the popular Stable Diffusion model, as well as overview important aspects of these generative AI tools, including personalization, conditioning, inversion, among others. Moreover, we give a comprehensive overview of the rapidly growing literature on diffusion-based generation and editing, categorized by the type of generated medium, including 2D images, videos, 3D objects, locomotion, and 4D scenes. Finally, we discuss available datasets, metrics, open challenges, and social implications. This STAR provides an intuitive starting point to explore this exciting topic for researchers, artists, and practitioners alike.

The reliance on implicit point matching via attention has become a core bottleneck in drag-based editing, resulting in a fundamental compromise on weakened inversion strength and costly test-time optimization (TTO). This compromise severely limits the generative capabilities of diffusion models, suppressing high-fidelity inpainting and text-guided creation. In this paper, we introduce LazyDrag, the first drag-based image editing method for Multi-Modal Diffusion Transformers, which directly eliminates the reliance on implicit point matching. In concrete terms, our method generates an explicit correspondence map from user drag inputs as a reliable reference to boost the attention control. This reliable reference opens the potential for a stable full-strength inversion process, which is the first in the drag-based editing task. It obviates the necessity for TTO and unlocks the generative capability of models. Therefore, LazyDrag naturally unifies precise geometric control with text guidance, enabling complex edits that were previously out of reach: opening the mouth of a dog and inpainting its interior, generating new objects like a ``tennis ball'', or for ambiguous drags, making context-aware changes like moving a hand into a pocket. Additionally, LazyDrag supports multi-round workflows with simultaneous move and scale operations. Evaluated on the DragBench, our method outperforms baselines in drag accuracy and perceptual quality, as validated by VIEScore and human evaluation. LazyDrag not only establishes new state-of-the-art performance, but also paves a new way to editing paradigms.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

While diffusion base models such as GPT-Image-2 and Nano-Banana exhibit remarkable visual expressiveness, their end-to-end generation inherently yields flattened bitmaps with error-prone text, precluding layer-wise post-editing. Conversely, code-based visual generation via Coding Agents provides precise layout control and decoupled layers, yet remains constrained by a lack of global aesthetic intuition and the difficulty of coding complex visual assets. To address this, we propose Editable Visual Design, a new paradigm driven by a Coding Agent. We designate the VLM as the ``creative brain'' for requirement comprehension, task planning, and aesthetic judgment, while utilizing the image generation model as an on-demand ``visual world simulator'' to synthesize standalone visual assets. Operating under an ``imagine first, then act'' closed-loop workflow, the agent generates isolated assets, writes native HTML/CSS, and iteratively refines the design against visual rendering feedback. Furthermore, Agent Design Replay faithfully reproduces the creative and reasoning trajectory akin to that of professional human designers. Ultimately, the system delivers editable artifacts with decoupled layers and real text, enabling users to perform intuitive mouse dragging and layout adjustments on a graphical user interface. Validations on posters, infographics, and other scenarios show that this paradigm successfully achieves both refined aesthetics and production-grade editability.

Generating high-quality triangle meshes is essential for film, gaming, and interactive 3D applications. Mainstream methods rely on mesh serialization and autoregressive processes, which stuggles in effective inference and is sensitive to error accumulation. In this paper, we present Nexus, a diffusion method that achieves holistic mesh generation via decoupled vertex and topology generation. First, we view mesh vertices as sparse voxels organized as an octree and adopt a diffusion model to generate the vertices in a coarse-to-fine manner. Second, for topology modeling, we propose Spacetime Interval, as an extension of Spacetime Distance to encode arbitrary edge and face topology into continuous per-vertex embeddings. It allows for a global and efficient recovery of complex topology. We then employ a diffusion model to generate the continuous embeddings on the generated vertices. Extensive experiments on the Objaverse and Toys4K datasets and in-the-wild images demonstrate that our method outperforms state-of-the-art autoregressive and two-stage baselines, effectively circumventing the inherent limitations of sequential mesh modeling. A blind user study from 3D practitioners confirms strong perceptual preference for our results.

Most real-world networks are noisy and incomplete samples from an unknown target distribution. Refining them by correcting corruptions or inferring unobserved regions typically improves downstream performance. Inspired by the impressive generative capabilities that have been used to correct corruptions in images, and the similarities between "in-painting" and filling in missing nodes and edges conditioned on the observed graph, we propose a novel graph generative framework, SGDM, which is based on subgraph diffusion. Our framework not only improves the scalability and fidelity of graph diffusion models, but also leverages the reverse process to perform novel, conditional generation tasks. In particular, through extensive empirical analysis and a set of novel metrics, we demonstrate that our proposed model effectively supports the following refinement tasks for partially observable networks: T1: denoising extraneous subgraphs, T2: expanding existing subgraphs and T3: performing "style" transfer by regenerating a particular subgraph to match the characteristics of a different node or subgraph.