Daily Papers

We present CAJun, a novel hierarchical learning and control framework that enables legged robots to jump continuously with adaptive jumping distances. CAJun consists of a high-level centroidal policy and a low-level leg controller. In particular, we use reinforcement learning (RL) to train the centroidal policy, which specifies the gait timing, base velocity, and swing foot position for the leg controller. The leg controller optimizes motor commands for the swing and stance legs according to the gait timing to track the swing foot target and base velocity commands using optimal control. Additionally, we reformulate the stance leg optimizer in the leg controller to speed up policy training by an order of magnitude. Our system combines the versatility of learning with the robustness of optimal control. By combining RL with optimal control methods, our system achieves the versatility of learning while enjoys the robustness from control methods, making it easily transferable to real robots. We show that after 20 minutes of training on a single GPU, CAJun can achieve continuous, long jumps with adaptive distances on a Go1 robot with small sim-to-real gaps. Moreover, the robot can jump across gaps with a maximum width of 70cm, which is over 40% wider than existing methods.

Perceptive locomotion policies typically observe a dense robot-centric elevation map, although only the terrain beneath and around the next footsteps informs the control decision. Learned encoders compress the whole visual input, leaving the policy to work out which inputs matter while learning the baseline locomotion task. Learning both at once slows training and, without computationally expensive attention mechanisms, makes generalization to new terrain harder. We instead remove redundant inputs from the elevation map before the policy sees it. A lightweight foothold prediction model (FPM) predicts future footholds from proprioception and the velocity command alone, and we sample the elevation map only in small patches around these predicted footholds. We train the prediction model alongside the locomotion policy, periodically retraining it on new policy rollouts as the robot's gait matures. This allows the perception to anticipate where the policy will step, while the policy learns to leverage terrain information around those steps. With the proposed lightweight preprocessing, the policy reaches a given terrain difficulty in roughly a third of the training iterations required with the complete map. It outperforms policies that observe the complete map where footholds are sparse, including in narrow walled corridors, and on unseen terrain, and it matches an attention-based encoder trained at several times the cost. The policy transfers zero-shot to a Unitree G1 humanoid traversing various obstacles, stairs, gaps, and step-downs beyond the training distribution in both indoor and outdoor environments.

Deep reinforcement learning has emerged as a promising and powerful technique for automatically acquiring control policies that can process raw sensory inputs, such as images, and perform complex behaviors. However, extending deep RL to real-world robotic tasks has proven challenging, particularly in safety-critical domains such as autonomous flight, where a trial-and-error learning process is often impractical. In this paper, we explore the following question: can we train vision-based navigation policies entirely in simulation, and then transfer them into the real world to achieve real-world flight without a single real training image? We propose a learning method that we call CAD^2RL, which can be used to perform collision-free indoor flight in the real world while being trained entirely on 3D CAD models. Our method uses single RGB images from a monocular camera, without needing to explicitly reconstruct the 3D geometry of the environment or perform explicit motion planning. Our learned collision avoidance policy is represented by a deep convolutional neural network that directly processes raw monocular images and outputs velocity commands. This policy is trained entirely on simulated images, with a Monte Carlo policy evaluation algorithm that directly optimizes the network's ability to produce collision-free flight. By highly randomizing the rendering settings for our simulated training set, we show that we can train a policy that generalizes to the real world, without requiring the simulator to be particularly realistic or high-fidelity. We evaluate our method by flying a real quadrotor through indoor environments, and further evaluate the design choices in our simulator through a series of ablation studies on depth prediction. For supplementary video see: https://youtu.be/nXBWmzFrj5s

Humans exhibit diverse and expressive whole-body movements. However, attaining human-like whole-body coordination in humanoid robots remains challenging, as conventional approaches that mimic whole-body motions often neglect the distinct roles of upper and lower body. This oversight leads to computationally intensive policy learning and frequently causes robot instability and falls during real-world execution. To address these issues, we propose Adversarial Locomotion and Motion Imitation (ALMI), a novel framework that enables adversarial policy learning between upper and lower body. Specifically, the lower body aims to provide robust locomotion capabilities to follow velocity commands while the upper body tracks various motions. Conversely, the upper-body policy ensures effective motion tracking when the robot executes velocity-based movements. Through iterative updates, these policies achieve coordinated whole-body control, which can be extended to loco-manipulation tasks with teleoperation systems. Extensive experiments demonstrate that our method achieves robust locomotion and precise motion tracking in both simulation and on the full-size Unitree H1 robot. Additionally, we release a large-scale whole-body motion control dataset featuring high-quality episodic trajectories from MuJoCo simulations deployable on real robots. The project page is https://almi-humanoid.github.io.

Obstacle avoidance in unmanned aerial vehicles (UAVs), as a fundamental capability, has gained increasing attention with the growing focus on spatial intelligence. However, current obstacle-avoidance methods mainly depend on limited field-of-view sensors and are ill-suited for UAV scenarios which require full-spatial awareness when the movement direction differs from the UAV's heading. This limitation motivates us to explore omnidirectional obstacle avoidance for panoramic drones with full-view perception. We first study an under explored problem setting in which a UAV must generate collision-free motion in environments with obstacles from arbitrary directions, and then construct a benchmark that consists of three representative flight tasks. Based on such settings, we propose Fly360, a two-stage perception-decision pipeline with a fixed random-yaw training strategy. At the perception stage, panoramic RGB observations are input and converted into depth maps as a robust intermediate representation. For the policy network, it is lightweight and used to output body-frame velocity commands from depth inputs. Extensive simulation and real-world experiments demonstrate that Fly360 achieves stable omnidirectional obstacle avoidance and outperforms forward-view baselines across all tasks. Our model is available at https://zxkai.github.io/fly360/

We present Action Agent, a two-stage framework that unifies agentic navigation video generation with flow-constrained diffusion control for multi-embodiment robot navigation. In Stage I, a large language model (LLM) acts as an orchestration module that selects video diffusion models, refines prompts through iterative validation, and accumulates cross-task memory to synthesize physically plausible first-person navigation videos from language and image inputs. This increases video generation success from 35% (single-shot) to 86% across 50 navigation tasks. In Stage II, we introduce FlowDiT, a Flow-Constrained Diffusion Transformer that converts optimized goal videos and language instructions into continuous velocity commands using action-space denoising diffusion. FlowDiT integrates DINOv2 visual features, learned optical flow for ego-motion representation, and CLIP language embeddings for semantic stopping. We pretrain on the RECON outdoor navigation dataset and fine-tune on 203 Unitree G1 humanoid episodes collected in Isaac Sim to calibrate velocity dynamics. A single 43M-parameter checkpoint achieves 73.2% navigation success in simulation and 64.7% task completion on a real Unitree G1 in unseen indoor environments under open-loop execution, while operating at 40--47 Hz. We evaluate Action Agent across three embodiments: a Unitree G1 humanoid (real hardware), a drone, and a wheeled mobile robot (Isaac Sim), demonstrating that decoupling trajectory imagination from execution yields a scalable and embodiment-aware paradigm for language-guided navigation.

While recent advances in humanoid locomotion have achieved stable walking on varied terrains, capturing the agility and adaptivity of highly dynamic human motions remains an open challenge. In particular, agile parkour in complex environments demands not only low-level robustness, but also human-like motion expressiveness, long-horizon skill composition, and perception-driven decision-making. In this paper, we present Perceptive Humanoid Parkour (PHP), a modular framework that enables humanoid robots to autonomously perform long-horizon, vision-based parkour across challenging obstacle courses. Our approach first leverages motion matching, formulated as nearest-neighbor search in a feature space, to compose retargeted atomic human skills into long-horizon kinematic trajectories. This framework enables the flexible composition and smooth transition of complex skill chains while preserving the elegance and fluidity of dynamic human motions. Next, we train motion-tracking reinforcement learning (RL) expert policies for these composed motions, and distill them into a single depth-based, multi-skill student policy, using a combination of DAgger and RL. Crucially, the combination of perception and skill composition enables autonomous, context-aware decision-making: using only onboard depth sensing and a discrete 2D velocity command, the robot selects and executes whether to step over, climb onto, vault or roll off obstacles of varying geometries and heights. We validate our framework with extensive real-world experiments on a Unitree G1 humanoid robot, demonstrating highly dynamic parkour skills such as climbing tall obstacles up to 1.25m (96% robot height), as well as long-horizon multi-obstacle traversal with closed-loop adaptation to real-time obstacle perturbations.

Vision-Language Navigation has increasingly emphasized high-level instruction reasoning, memory, global map construction, and instruction decomposition, while the low-level action representation remains comparatively underexplored. We propose CoFL-S, a low-level vision-language-action framework that predicts a language-conditioned flow field over the robot's local visible sector and generates continuous trajectories by rolling out the predicted field. To train this low-level representation, we convert each VLN-CE episode, originally a whole-episode instruction paired with an action sequence, into frame-level local supervision with aligned sub-instructions and matched action, trajectory, and dense flow-field targets. For evaluation, we introduce a continuous-time Habitat benchmark that isolates low-level action interfaces from instruction decomposition and executes all methods through a shared velocity-command controller, enabling decomposition-independent closed-loop comparison across different planner frequencies rather than fixed discrete forward-and-turn transitions in VLN-CE. Under matched encoders and training settings, CoFL-S consistently outperforms baselines across planner frequencies in the continuous-time Habitat benchmark, and zero-shot real-world closed-loop deployment further shows its advantage over the evaluated baselines beyond simulation. See the project website at https://github.com/ut-dragon-lab/CoFL

Legged robots pose one of the greatest challenges in robotics. Dynamic and agile maneuvers of animals cannot be imitated by existing methods that are crafted by humans. A compelling alternative is reinforcement learning, which requires minimal craftsmanship and promotes the natural evolution of a control policy. However, so far, reinforcement learning research for legged robots is mainly limited to simulation, and only few and comparably simple examples have been deployed on real systems. The primary reason is that training with real robots, particularly with dynamically balancing systems, is complicated and expensive. In the present work, we introduce a method for training a neural network policy in simulation and transferring it to a state-of-the-art legged system, thereby leveraging fast, automated, and cost-effective data generation schemes. The approach is applied to the ANYmal robot, a sophisticated medium-dog-sized quadrupedal system. Using policies trained in simulation, the quadrupedal machine achieves locomotion skills that go beyond what had been achieved with prior methods: ANYmal is capable of precisely and energy-efficiently following high-level body velocity commands, running faster than before, and recovering from falling even in complex configurations.

Language-conditioned quadrotor flight requires a policy to ground semantic goals, anticipate the visual consequences of ego-motion, and output control references that remain smooth and dynamically executable under rapidly changing first-person views. Existing aerial vision-language navigation and vision-language-action methods commonly use discrete actions, high-level waypoints, or instantaneous velocity commands, which provide limited supervision about how flight actions change future observations. We present AeroAct, an action-centered world-action model (WAM) for quadrotor navigation. To the best of our knowledge, AeroAct is the first WAM instantiated and demonstrated for real-world aerial flight. The model adapts a pretrained video diffusion Transformer to predict local trajectory-action chunks from egocentric visual history, proprioception, and language. Future first-person frames are used during training as dense consequence supervision, while deployment directly decodes actions without generating future video. To obtain aligned visual, state, language, and dynamically feasible action data, we build a DiffAero-based pipeline with complementary Isaac Lab and 3D Gaussian splatting renderers. We further introduce a low-cost handheld collection device that couples camera observations with motion estimates to recreate flight-like egocentric trajectories, and a self-guidance procedure that improves temporal consistency across overlapping trajectory chunks. Closed-loop simulation and real-world experiments show that temporal visual context improves target tracking and object-search performance, and that WAM-based policies can be executed on a physical quadrotor.

Despite transformative advances in generative motion synthesis, real-time interactive motion control remains dominated by traditional techniques. In this work, we identify two key challenges in bridging research and production: 1) Real-time scalability: Industry applications demand real-time generation of a vast repertoire of motion skills, while generative methods exhibit significant degradation in quality and scalability under real-time computation constraints, and 2) Integration: Industry applications demand fine-grained multi-modal control involving velocity commands, style selection, and precise keyframes, a need largely unmet by existing text- or tag-driven models. To overcome these limitations, we introduce MotionBricks: a large-scale, real-time generative framework with a two-fold solution. First, we propose a large-scale modular latent generative backbone tailored for robust real-time motion generation, effectively modeling a dataset of over 350,000 motion clips with a single model. Second, we introduce smart primitives that provide a unified, robust, and intuitive interface for authoring both navigation and object interaction. Applications can be designed in a plug-and-play manner like assembling bricks without expert animation knowledge. Quantitatively, we show that MotionBricks produces state-of-the-art motion quality on open-source and proprietary datasets of various scales, while also achieving a real-time throughput of 15,000 FPS with 2ms latency. We demonstrate the flexibility and robustness of MotionBricks in a complete production-level animation demo, covering navigation and object-scene interaction across various styles with a unified model. To showcase our framework's application beyond animation, we deploy MotionBricks on the Unitree G1 humanoid robot to demonstrate its flexibility and generalization for real-time robotic control.

It is well-known that a diverse corpus is critical for training large language models, which are typically constructed from a mixture of various domains. In general, previous efforts resort to sampling training data from different domains with static proportions, as well as adjusting data proportions during training. However, few methods have addressed the complexities of domain-adaptive continual pre-training. To fill this gap, we propose Velocitune, a novel framework dynamically assesses learning velocity and adjusts data proportions accordingly, favoring slower-learning domains while shunning faster-learning ones, which is guided by a scaling law to indicate the desired learning goal for each domain with less associated cost. To evaluate the effectiveness of Velocitune, we conduct experiments in a reasoning-focused dataset with CodeLlama, as well as in a corpus specialised for system command generation with Llama3 and Mistral. Velocitune achieves performance gains in both math and code reasoning tasks and command-line generation benchmarks. Further analysis reveals that key factors driving Velocitune's effectiveness include target loss prediction and data ordering.

Underwater robots combine complementary sensors whose reliability changes abruptly with water visibility, viewpoint, and vehicle motion. We introduce AquaJEPA, an action-conditioned joint-embedding predictive model that fuses an RGB camera, forward-looking sonar, and proprioception with explicit sensor validity. It predicts a future latent target conditioned on eight-thruster commands and supplies velocity and sonar-profile predictions to a shared receding-horizon planner. We study the method in Stonefish against reactive, state-only, ordinary multimodal, supervised dynamics, and recurrent world-model baselines. We further isolate the EMA target, action margin, masks, and modality dropout. A preregistered 120-environment replication comprises five independent replicates of a grid crossing three unseen obstacle maps, four water-visibility coefficients, and nominal versus shifted dynamics, while intermittently removing DVL observations. In 120 fresh paired environments with scheduled DVL loss, AquaJEPA reaches 74 goals, versus 68 for both state-only and the recurrent world model, and attains the lowest mean final error (0.906 m). Paired final-error reductions relative to ordinary multimodal prediction, supervised dynamics, and the recurrent world model are 0.273 m (95% CI: 0.190-0.356), 0.364 m (0.260-0.468), and 0.106 m (0.025-0.187), respectively. AquaJEPA therefore achieves the best aggregate closed-loop performance and significantly outperforms three action-conditioned predictive baselines in paired final error; its advantage over state-only remains statistically unresolved.

Robotic simulators are a cornerstone of modern research in aerial robotics, serving both as a vehicle for the development of new control algorithms and as the data source for training reinforcement learning (RL) policies. Yet, existing quadcopter learning environments often face a trade-off between physical fidelity, multi-agent support, and the throughput required by modern deep RL pipelines. In this paper, we present MuJoCo-Drones-Gym, an open-source Gymnasium-compatible multi-drone environment built on top of the MuJoCo physics engine. MuJoCo-Drones-Gym supports an arbitrary number of Bitcraze Crazyflie 2.x nano-quadcopters and exposes a modular API for selecting (i)~the physics model (rigid-body MuJoCo, explicit Python dynamics, or any subset of ground effect, blade drag, and inter-drone downwash), (ii)~the action interface (per-motor RPMs, collective normalized thrust, velocity setpoints, or PID waypoint commands), and (iii)~the observation space (kinematic state vectors, RGB / depth / segmentation cameras, or neighbourhood adjacency information). A PettingZoo ParallelEnv wrapper enables drop-in multi-agent reinforcement learning, while a suite of seven task environments, hover, velocity tracking, multi-drone hover, waypoint navigation, formation flight, gate racing, and a generic multi-agent template, demonstrates the breadth of the interface. We describe the environment design, the underlying physics and quadcopter dynamics, and illustrate its use through control and learning examples that mirror those of the closely related gym-pybullet-drones project, while taking advantage of MuJoCo's improved contact handling, rendering, and parallelizability.

Despite recent advances in image-to-video generation, better controllability and local animation are less explored. Most existing image-to-video methods are not locally aware and tend to move the entire scene. However, human artists may need to control the movement of different objects or regions. Additionally, current I2V methods require users not only to describe the target motion but also to provide redundant detailed descriptions of frame contents. These two issues hinder the practical utilization of current I2V tools. In this paper, we propose a practical framework, named Follow-Your-Click, to achieve image animation with a simple user click (for specifying what to move) and a short motion prompt (for specifying how to move). Technically, we propose the first-frame masking strategy, which significantly improves the video generation quality, and a motion-augmented module equipped with a short motion prompt dataset to improve the short prompt following abilities of our model. To further control the motion speed, we propose flow-based motion magnitude control to control the speed of target movement more precisely. Our framework has simpler yet precise user control and better generation performance than previous methods. Extensive experiments compared with 7 baselines, including both commercial tools and research methods on 8 metrics, suggest the superiority of our approach. Project Page: https://follow-your-click.github.io/

Path-velocity decomposition is an intuitive yet powerful approach to address the complexity of kinodynamic motion planning. The difficult trajectory planning problem is solved in two separate, simpler, steps: first, find a path in the configuration space that satisfies the geometric constraints (path planning), and second, find a time-parameterization of that path satisfying the kinodynamic constraints. A fundamental requirement is that the path found in the first step should be time-parameterizable. Most existing works fulfill this requirement by enforcing quasi-static constraints in the path planning step, resulting in an important loss in completeness. We propose a method that enables path-velocity decomposition to discover truly dynamic motions, i.e. motions that are not quasi-statically executable. At the heart of the proposed method is a new algorithm -- Admissible Velocity Propagation -- which, given a path and an interval of reachable velocities at the beginning of that path, computes exactly and efficiently the interval of all the velocities the system can reach after traversing the path while respecting the system kinodynamic constraints. Combining this algorithm with usual sampling-based planners then gives rise to a family of new trajectory planners that can appropriately handle kinodynamic constraints while retaining the advantages associated with path-velocity decomposition. We demonstrate the efficiency of the proposed method on some difficult kinodynamic planning problems, where, in particular, quasi-static methods are guaranteed to fail.

Flow matching policies learn continuous velocity fields that transport noise to actions, enabling fast deterministic inference for robot manipulation. However, standard training optimizes a pointwise velocity objective while inference requires numerical integration of that field -- a mismatch that causes compounding trajectory errors. We propose four complementary remedies: (1) auxiliary rectified flow velocity regression that provides uniform temporal supervision across the full time interval; (2) multi-step trajectory consistency training that supervises the integrated displacement of the velocity field over trajectory segments, directly closing the train-inference gap; (3) velocity field regularization that enforces temporal smoothness, preventing oscillations that destabilize integration; and (4) fourth-order Runge-Kutta (RK4) inference that reduces global discretization error by orders of magnitude over Euler methods. Critically, these components are not independently sufficient -- RK4 without a smooth velocity field fails, and smoothness without trajectory-level supervision still drifts, as our ablation study confirms. We further pair these with a dual-view 3D point cloud encoder using two independent PointNet encoders for complementary spatial perception. On four real-robot tasks across a Franka arm and a Boston Dynamics Spot, our method achieves 70% and 60% overall success on two long-horizon multi-phase tasks where both baselines score 0%, and reaches 100% on precision tool placement. Three MetaWorld simulation tasks confirm consistent improvements, validating that trajectory-level supervision is essential for reliable policy execution.

Flow-based generative models have become a strong framework for high-quality generative modeling, yet pretrained models are rarely used in their vanilla conditional form: conditional samples without guidance often appear diffuse and lack fine-grained detail due to the smoothing effects of neural networks. Existing guidance techniques such as classifier-free guidance (CFG) improve fidelity but double the inference cost and typically reduce sample diversity. We introduce Momentum Guidance (MG), a new dimension of guidance that leverages the ODE trajectory itself. MG extrapolates the current velocity using an exponential moving average of past velocities and preserves the standard one-evaluation-per-step cost. It matches the effect of standard guidance without extra computation and can further improve quality when combined with CFG. Experiments demonstrate MG's effectiveness across benchmarks. Specifically, on ImageNet-256, MG achieves average improvements in FID of 36.68% without CFG and 25.52% with CFG across various sampling settings, attaining an FID of 1.597 at 64 sampling steps. Evaluations on large flow-based models like Stable Diffusion 3 and FLUX.1-dev further confirm consistent quality enhancements across standard metrics.

While Flow Matching theoretically guarantees constant-velocity trajectories, we identify a critical breakdown in high-dimensional practice: the Velocity Deficit. We show that the MSE objective systematically underestimates velocity magnitude, causing generated samples to fail to reach the data manifold-a phenomenon we term Integration Lag. To rectify this, we propose Initial Energy Injection, instantiated via two complementary methods: the training-based Magnitude-Aware Flow Matching (MAFM) and the training-free Scale Schedule Corrector (SSC). Both are grounded in our discovery of a crucial asymmetry: velocity contraction causes harmful kinetic stagnation at the trajectory's start, yet acts as a beneficial denoising mechanism at its end. Empirically, SSC yields significant efficiency gains with zero retraining and just one line of code. On ImageNet-1k (256x256), it improves FID by 44.6% (from 13.68 to 7.58) and achieves a 5x speedup, enabling a 50-step generator (FID 7.58) to beat a 250-step baseline (FID 8.65). Furthermore, our methods generalize to Text-to-Image tasks and high-resolution generation, improving FID on MS-COCO by ~22%.

Robot manipulation alternates between low-risk transit phases that call for fast execution and high-risk contact stages that demand slow, precise motion. Yet existing Vision-Language-Action models (VLAs) only inherit a single fixed speed from training demonstrations. Prior efforts to accelerate VLAs through model compression, KV-cache reuse, or reinforcement learning only shift the policy from one fixed speed to another, and leave deceleration almost unexplored. We observe that the magnitude of each predicted action already governs how fast the robot moves, opening a direct route to controllable execution speed. We turn this observation into TempoVLA, a single VLA whose execution speed is controlled by an explicit condition. TempoVLA combines two coupled components. (1) A data-side Variable-Speed Trajectory Augmentation (VSTA) that re-times demonstration to any target speed by merging or splitting actions while preserving its motion semantics. (2) A model-side conditioning mechanism that feeds the speed to the policy. Statistics show that VSTA reaches the requested speed with negligible motion error. Experiments in simulation and on real-world tasks demonstrate that TempoVLA achieves flexible speed control in both directions, while VSTA additionally boosts the default 1times performance via better data utilization. Furthermore, by cooperating with a large multimodal model, TempoVLA realizes dynamic speed control, accelerating through low-risk phases and decelerating for high-risk ones.

Recent advances in diffusion/flow-matching policies have enabled imitation learning of complex, multi-modal action trajectories. However, they are computationally expensive because they sample a trajectory of trajectories: a diffusion/flow trajectory of action trajectories. They discard intermediate action trajectories, and must wait for the sampling process to complete before any actions can be executed on the robot. We simplify diffusion/flow policies by treating action trajectories as flow trajectories. Instead of starting from pure noise, our algorithm samples from a narrow Gaussian around the last action. Then, it incrementally integrates a velocity field learned via flow matching to produce a sequence of actions that constitute a single trajectory. This enables actions to be streamed to the robot on-the-fly during the flow sampling process, and is well-suited for receding horizon policy execution. Despite streaming, our method retains the ability to model multi-modal behavior. We train flows that stabilize around demonstration trajectories to reduce distribution shift and improve imitation learning performance. Streaming flow policy outperforms prior methods while enabling faster policy execution and tighter sensorimotor loops for learning-based robot control. Project website: https://streaming-flow-policy.github.io/

A prevailing view in Reinforcement Learning for Verifiable Rewards (RLVR) interprets recent progress through the lens of an exploration-exploitation trade-off, a perspective largely shaped by token-level metrics. We re-examine this perspective, proposing that this perceived trade-off may not be a fundamental constraint but rather an artifact of the measurement level. To investigate this, we shift the analysis to the semantically rich hidden-state space, adopting Effective Rank (ER) to quantify exploration and proposing its novel first- and second-order derivatives, named Effective Rank Velocity (ERV) and Effective Rank Acceleration (ERA), to capture exploitation dynamics. Our analysis reveals that at the hidden-state level, exploration and exploitation could be decoupled (Sec. 4). This finding reveals an opportunity to enhance both capacities simultaneously. This insight motivates our method, Velocity-Exploiting Rank-Learning (VERL), the first to operationalize the principle of synergistic exploration-exploitation enhancement by directly shaping the RL advantage function. The key innovation is leveraging the theoretically stable ERA as a predictive meta-controller to create a synergistic, dual-channel incentive structure. Instead of forcing a trade-off, VERL prospectively amplifies rewards for exploration to preempt overconfidence and reinforces exploitative gains to consolidate reasoning. Experiments across diverse LLMs and reasoning benchmarks show consistent gains, including up to 21.4% absolute accuracy improvement on the challenging Gaokao 2024 dataset.

Reward-based fine-tuning of diffusion models has largely inherited likelihood-based policy optimization developed for autoregressive large language models (LLMs). Diffusion models, however, are natively trained through velocity regression and do not directly provide the likelihood of a generated sample. Existing methods address this using transition likelihoods along stochastic denoising trajectories or evidence lower bounds (ELBOs) to approximate generated-sample likelihoods. These approximations arise from applying likelihood-based updates to models whose native training and generation operate through velocity fields. We instead take velocity matching as the starting point for reward fine-tuning. We propose reward-based velocity matching (RVM), which weights the velocity-matching loss by reward with an additional anchor regression term, requiring neither likelihood estimation nor likelihood ratios. RVM recovers Reinforce Adjoint Matching at the update level and contains DiffusionNFT as a special case, while ELBO-based methods are closely related through the same velocity-regression structure. This unified view isolates reward design and anchor velocity as principal design choices in velocity-based fine-tuning. Across text-to-image, text-to-video, and image-to-video generation, RVM matches or outperforms the evaluated trajectory-based methods. On Wan2.1-T2V-1.3B, it achieves the highest VBench Overall among the evaluated methods, with substantially lower estimated training costs than the trajectory-based approaches. For video fine-tuning, we introduce a dynamic-tracking reward that provides explicit motion feedback and improves both Dynamic Degree and overall VBench performance.

Achieving scalable coordination in large robotic swarms is often constrained by reliance on inter-agent communication, which introduces latency, bandwidth limitations, and vulnerability to failure. To address this gap, a decentralized approach for outer-loop control of large multi-agent systems based on the paradigm of how a fluid moves through a volume is proposed and evaluated. A relationship between fundamental fluidic element properties and individual robotic agent states is developed such that the corresponding swarm "flows" through a space, akin to a fluid when forced via a pressure boundary condition. By ascribing fluid-like properties to subsets of agents, the swarm evolves collectively while maintaining desirable structure and coherence without explicit communication of agent states within or outside of the swarm. The approach is evaluated using simulations involving O(10^3) quadcopter agents and compared against Computational Fluid Dynamics (CFD) solutions for a converging-diverging domain. Quantitative agreement between swarm-derived and CFD fields is assessed using Root-Mean-Square Error (RMSE), yielding normalized errors of 0.15-0.9 for velocity, 0.61-0.98 for density, 0-0.937 for pressure. These results demonstrate the feasibility of treating large robotic swarms as continuum systems that retain the macroscopic structure derived from first principles, providing a basis for scalable and decentralized control.

Recent VLM-based autonomous driving planners adopt GRPO-style reinforcement learning to optimize driving performance. However, existing GRPO recipes either optimize driving efficiency, risking progress-seeking but unsafe behavior, or enforce early safety constraints, leading to overly conservative behavior; both require lengthy training. To solve these problems, we first reveal two distinct RL regimes: a progress regime (Run-GRPO) that aggressively explores high progress, and a safety regime (Walk-GRPO) that restores safety under stable progress. Based on this finding, we propose Run-then-Walk, a simple yet effective two-stage reward scheduling strategy for GRPO, achieving both better performance and faster convergence. Unlike one-stage RL, which may focus on progress, safety, or a mixture of both within a single training phase, this schedule explicitly separates progress discovery from safety repair. In the Run phase, we focus on progress, allowing the policy to escape the conservative bias and discover high-progress modes. In the subsequent Walk phase, we introduce endpoint and safety strategy to repair unsafe behaviors from the Run phase. This reversed schedule overcomes the conservatism of Walk-first methods and the unsafe progress-seeking of joint optimization. We validate it with various VLM-based planners on multiple benchmarks: NAVSIMv1, NAVSIMv2, Navhard, and nuScenes. Extensive experiments demonstrate improved driving performance while requiring 40--50\% fewer RL training epochs than the baselines. Code is available at https://github.com/haha-yuki-haha/AutoDrive-P3_with_Run-then-walk.

Evaluating whether a vision-language model (VLM) can act through a physical body is challenging. The outcome of an action couples the VLM's decision with motor control. When a task fails, it is hard to tell whether the VLM made a bad choice or the motor controller simply failed to execute it, e.g., losing balance and falling. In this work, we introduce HumanCLAW, an evaluation framework that decouples action decision-making from low-level execution. At every step, a harnessed, off-the-shelf VLM issues an atomic skill command, and the command is translated into a sub-second chunk of continuous full-body motion with real physical consequences, including gravity and collisions. The body can therefore act freely in the physical world, while execution-side disturbances, balance and motor errors, are factored out. What remains measurable is the model's action intelligence: its moment-to-moment choice of what the body should execute next. Based on this framework, we build HumanCLAW-Bench: 1,218 long-horizon, egocentric find-navigate-interact episodes across 41 indoor scenes. We test nine state-of-the-art VLMs and find that none solves the benchmark; the best model reaches only a 16.8% success rate. Recognizing the target is not the bottleneck. What current VLMs lack is embodied self-awareness: they lose track of their own body, failing to tell where it is, whether it has reached the goal, or whether it has hit an obstacle.

Aligning generative flow models on continuous spaces via online reinforcement learning is constrained by intractable trajectory likelihoods. Existing density-approximated policy gradient methods rely on stochastic SDE samplers to construct tractable transition kernels, which introduce training-inference inconsistencies and necessitates Classifier-Free Guidance (CFG). While implicit frameworks such as DiffusionNFT directly optimize forward-process velocity fields, its heuristic fixed-magnitude corrections prevent optimization strength from relative intra-group quality. We propose Flow Advantage-Weighted Rectification (FlowAWR), a paradigm that recasts continuous generative policy optimization as supervised regression toward a theoretically optimal velocity field. Starting from the optimal policy of a KL-constrained reward maximization, FlowAWR derives the optimal velocity field that admits a magnitude-aware, advantage-weighted rectification form, yielding SDE-free optimization and CFG-free generation. In comparative evaluations on SD3.5-Medium, FlowAWR achieves improved alignment performance alongside a 2times to 5times convergence acceleration over DiffusionNFT (e.g., reaching a 24.12 PickScore in 1.2k steps, versus 23.82 in 2.0k steps for DiffusionNFT and 23.50 in >4k steps for FlowGRPO). Under multi-reward constraints, FlowAWR sustains generation quality, satisfying structural rules while maintaining stable out-of-domain performance.

Vision-Language-Action (VLA) policies that execute fixed-length action chunks can exhibit multimodal bifurcation: a cross-chunk inconsistency in which adjacent chunks generated from independent Gaussian latents can converge to incompatible trajectory modes, producing abrupt discontinuities at chunk boundaries. Existing remedies either require backpropagation through the policy at each denoising step, rely on rejection sampling, or require retraining, each trading computational cost or task reliability for smoother transitions. We propose SEAM (Smooth Execution of Action-Chunked Motion), a training-free inference-time method for flow matching VLAs. SEAM exploits a simple synchronous-execution insight: after the robot consumes the executed prefix, the previous chunk's unexecuted tail is already available as an analytic consistency reference. Its core mechanism, Velocity-guided Loss Steering (VLS), derives a time-dependent target from this tail and applies a closed-form correction after each Euler step without backpropagating through the policy network. On LIBERO-10 with pi_0.5, SEAM reduces boundary jerk by 28%, reduces chunk transition discontinuity by 27%, preserves baseline-level task success, and keeps denoising-loop cost near the unguided baseline.

We study the problem of learning generative models for discrete sequences in a continuous embedding space. Whereas prior approaches typically operate in Euclidean space or on the probability simplex, we instead work on the sphere mathbb S^{d-1}. There the von Mises-Fisher (vMF) distribution induces a natural noise process and admits a closed-form conditional score. The conditional velocity is in general intractable. Exploiting the radial symmetry of the vMF density we reduce the continuity equation on mathbb S^{d-1} to a scalar ODE in the cosine similarity, whose unique bounded solution determines the velocity. The marginal velocity and marginal score on (mathbb S^{d-1})^L both decompose into posterior-weighted tangent sums that differ only by per-token scalar weights. This gives access to both ODE and predictor-corrector (PC) sampling. The posterior is the only learned object, trained by a cross-entropy loss. Experiments compare the vMF path against geodesic and Euclidean alternatives. The combination of vMF and PC sampling significantly improves results on Sudoku and language modeling.

Flow Matching (FM) has recently emerged as a principled and efficient alternative to diffusion models. Standard FM encourages the learned velocity field to follow a target direction; however, it may accumulate errors along the trajectory and drive samples off the data manifold, leading to perceptual degradation, especially in lightweight or low-step configurations. To enhance stability and generalization, we extend FM into a balanced attract-repel scheme that provides explicit guidance on both "where to go" and "where not to go." To be formal, we propose Velocity Contrastive Regularization (VeCoR), a complementary training scheme for flow-based generative modeling that augments the standard FM objective with contrastive, two-sided supervision. VeCoR not only aligns the predicted velocity with a stable reference direction (positive supervision) but also pushes it away from inconsistent, off-manifold directions (negative supervision). This contrastive formulation transforms FM from a purely attractive, one-sided objective into a two-sided training signal, regularizing trajectory evolution and improving perceptual fidelity across datasets and backbones. On ImageNet-1K 256times256, VeCoR yields 22\% and 35\% relative FID reductions on SiT-XL/2 and REPA-SiT-XL/2 backbones, respectively, and achieves further FID gains (32\% relative) on MS-COCO text-to-image generation, demonstrating consistent improvements in stability, convergence, and image quality, particularly in low-step and lightweight settings. Project page: https://p458732.github.io/VeCoR_Project_Page/

This paper introduces the BOW Planner, a scalable motion planning algorithm designed to navigate robots through complex environments using constrained Bayesian optimization (CBO). Unlike traditional methods, which often struggle with kinodynamic constraints such as velocity and acceleration limits, the BOW Planner excels by concentrating on a planning window of reachable velocities and employing CBO to sample control inputs efficiently. This approach enables the planner to manage high-dimensional objective functions and stringent safety constraints with minimal sampling, ensuring rapid and secure trajectory generation. Theoretical analysis confirms the algorithm's asymptotic convergence to near-optimal solutions, while extensive evaluations in cluttered and constrained settings reveal substantial improvements in computation times, trajectory lengths, and solution times compared to existing techniques. Successfully deployed across various real-world robotic systems, the BOW Planner demonstrates its practical significance through exceptional sample efficiency, safety-aware optimization, and rapid planning capabilities, making it a valuable tool for advancing robotic applications. The BOW Planner is released as an open-source package and videos of real-world and simulated experiments are available at https://bow-web.github.io.

A common recipe to improve diffusion models at test-time so that samples score highly against a user-specified reward is to introduce the gradient of the reward into the dynamics of the diffusion itself. This procedure is often ill posed, as user-specified rewards are usually only well defined on the data distribution at the end of generation. While common workarounds to this problem are to use a denoiser to estimate what a sample would have been at the end of generation, we propose a simple solution to this problem by working directly with a flow map. By exploiting a relationship between the flow map and velocity field governing the instantaneous transport, we construct an algorithm, Flow Map Trajectory Tilting (FMTT), which provably performs better ascent on the reward than standard test-time methods involving the gradient of the reward. The approach can be used to either perform exact sampling via importance weighting or principled search that identifies local maximizers of the reward-tilted distribution. We demonstrate the efficacy of our approach against other look-ahead techniques, and show how the flow map enables engagement with complicated reward functions that make possible new forms of image editing, e.g. by interfacing with vision language models.

This work introduces MotionLCM, extending controllable motion generation to a real-time level. Existing methods for spatial control in text-conditioned motion generation suffer from significant runtime inefficiency. To address this issue, we first propose the motion latent consistency model (MotionLCM) for motion generation, building upon the latent diffusion model (MLD). By employing one-step (or few-step) inference, we further improve the runtime efficiency of the motion latent diffusion model for motion generation. To ensure effective controllability, we incorporate a motion ControlNet within the latent space of MotionLCM and enable explicit control signals (e.g., pelvis trajectory) in the vanilla motion space to control the generation process directly, similar to controlling other latent-free diffusion models for motion generation. By employing these techniques, our approach can generate human motions with text and control signals in real-time. Experimental results demonstrate the remarkable generation and controlling capabilities of MotionLCM while maintaining real-time runtime efficiency.

Safety-critical applications such as autonomous vehicles and social robots require fast computation and accurate probability density estimation on trajectory prediction. To address both requirements, this paper presents a new normalizing flow-based trajectory prediction model named FlowChain. FlowChain is a stack of conditional continuously-indexed flows (CIFs) that are expressive and allow analytical probability density computation. This analytical computation is faster than the generative models that need additional approximations such as kernel density estimation. Moreover, FlowChain is more accurate than the Gaussian mixture-based models due to fewer assumptions on the estimated density. FlowChain also allows a rapid update of estimated probability densities. This update is achieved by adopting the newest observed position and reusing the flow transformations and its log-det-jacobians that represent the motion trend. This update is completed in less than one millisecond because this reuse greatly omits the computational cost. Experimental results showed our FlowChain achieved state-of-the-art trajectory prediction accuracy compared to previous methods. Furthermore, our FlowChain demonstrated superiority in the accuracy and speed of density estimation. Our code is available at https://github.com/meaten/FlowChain-ICCV2023

Learning visuomotor policies via behavior cloning typically involves mimicking expert demonstrations collected by human operators. However, natural human demonstrations inherently contain high-frequency noise, such as intermittent jerks, pauses, and action jitter. Training policies to directly imitate these raw trajectories inevitably causes the model to inherit these suboptimal behaviors. This pathology is particularly pronounced in diffusion-based policies, where iterative denoising steps can inadvertently amplify high-frequency artifacts at the expense of meaningful fine-grained details. To address these limitations, we present a novel frequency-based algorithm that enables implicit spectral maneuvering and smooth action generation. Our method, Frequency Guidance Operator (FGO), steers the generation process of diffusion polices by progressively driving the noisy samples through intermediate sub-frequency manifolds with expanding spectral bands. Validated on 15 robotic manipulation tasks from 5 benchmarks, FGO achieves superior performance in enhancing action smoothness and temporal consistency while preserving the details necessary for successful task execution. Project website: https://henrywjl.github.io/frequency-guidance-operator/

Flow based generative models have charted an impressive path across multiple visual generation tasks by adhering to a simple principle: learning velocity representations of a linear interpolant. However, we observe that training velocity solely from the final layer output underutilizes the rich inter layer representations, potentially impeding model convergence. To address this limitation, we introduce DeepFlow, a novel framework that enhances velocity representation through inter layer communication. DeepFlow partitions transformer layers into balanced branches with deep supervision and inserts a lightweight Velocity Refiner with Acceleration (VeRA) block between adjacent branches, which aligns the intermediate velocity features within transformer blocks. Powered by the improved deep supervision via the internal velocity alignment, DeepFlow converges 8 times faster on ImageNet with equivalent performance and further reduces FID by 2.6 while halving training time compared to previous flow based models without a classifier free guidance. DeepFlow also outperforms baselines in text to image generation tasks, as evidenced by evaluations on MSCOCO and zero shot GenEval.

We introduce StreamForce, a streaming video generation framework that enables physically grounded control through continuous force inputs. Unlike prior video models that train separate models for different force types, assume fixed forces, or rely on non-causal processing, StreamForce is a causal and unified model that responds instantly and coherently to both local and global, time-varying forces. To achieve this, we design a unified force representation as a control signal and develop a distillation pipeline for force-controllable video generation. Our model combines autoregressive efficiency with force responsiveness, sustaining stable photometric and dynamic realism. StreamForce runs at up to 16.6 FPS on a single GPU, achieving state-of-the-art performance in both force adherence and motion realism. Project website: https://neu-vi.github.io/StreamForce/

In this paper, we study how to achieve one-step action generation in Robotic Foundation Models (RFMs), aiming to overcome the high inference latency of multi-step flow matching. MeanFlow provides a promising framework for this goal, yet its direct application leads to performance collapse. We discover that this stems from two distinctive dynamics exhibited in the RFM velocity field: (1) the ``local acceleration" exhibits stability early on, but surges sharply towards the end of the denoising process, and (2) the spread of its magnitudes across samples widens as denoising progresses. To address these issues, we introduce Kinematic MeanFlow (K-MF), a novel one-step action policy tailored for RFMs. Specifically, grounded in a kinematic identity, K-MF decouples the time derivative term in the MeanFlow formulation into two sub-interval terms separated by an intermediate point. This decoupled formulation enables the two terms to capture early-stage and late-stage denoising dynamics, respectively, while mitigating the error amplification across the process. As a result, our K-MF empowers RFMs to achieve one-step action generation in both training from scratch and fine-tuning paradigms across diverse tasks, while outperforming multi-step flow matching in most settings. In terms of inference efficiency, K-MF reduces action-head latency of GR00T-N1.6 by 67.5%~74.4% across L40 and Jetson Orin in eager and compiled modes, yielding end-to-end latency reductions of 30.3%~54.9%. Code will be available at https://github.com/IntelChina-AI/K-MF.

Modern generative models typically rely on an adversarial critic, a prescribed noise-to-data path, or an autoregressive factorization. Instead, we show that a proper distributional energy can induce sample-level motion and provide direct regression supervision for a one-step generator. Three-Body Scattering Modeling (TBSM) for generation turns the energy distance into a constant-size per-projectile interaction: each projectile is attracted toward one real source and repelled from one independently generated source. Conditioned on the projectile and its condition, its expectation equals the 2-Wasserstein gradient-flow velocity of frac12D_E^2(P_θ,Q). A batch of B frozen-target events yields O(B) sample-level losses, each using one reference for its condition instead of the minibatch-wide all-pairs field used by methods such as Drifting Models. Tracking this conditional expectation online can reduce field noise. Using scattering in frozen image features, TBSM trains one-step generators on ImageNet-256, achieving FID{}=2.23 with pixel-space PixelDiT-XL and FID{}=1.63 with latent-space DiT-XL at NFE{}=1. We provide a design map relating diffusion-related supervision, Drift-like dynamics, and GAN-like objectives. These results establish tracked scattering as a route to high-dimensional one-step generation. Code: https://github.com/sp12138/TBSM.

Mobility simulation supports logistics, safety, and communications planning in industrial environments such as ports, mines, and airports. Existing trajectory models, however, rely on absolute coordinates, road-network tokens, or semantic zones: representations that are site-specific and not well suited to unstructured industrial terrain. We introduce the Industrial Kinematic Trajectory Model (IKTM), a coordinate-free trajectory generator that represents industrial vehicle motion through kinematic sequences (speed and heading change) with no absolute spatial reference. IKTM uses an autoregressive causal transformer with probabilistic mixture heads and extends our prior coordinate-free Markovian model with deep sequence modelling and an explicit duration-conditioning signal. Trained on one site and evaluated zero-shot on three unseen sites, it matches the small-turn shape of the empirical turn-rate distributions of held-out telematics; across all four sites, the per-site mean Jensen-Shannon divergence over 100 sampling seeds spans approximately 0.035-0.050 bits under an oracle-length duration-target protocol and approximately 0.032-0.042 bits under a fully zero-shot prior-length protocol, with similar ranges whether out-of-distribution (OOD) duration targets are drawn from each held-out site's empirical length distribution or from the Site A prior. Both protocols stay above the metric's sampling-noise floor (<=0.0049 bits). Paired by site, the oracle-length values are 5.3-6.0x lower than those of a re-implementation of our prior Markovian model under the same 1 Hz protocol. Termination is duration-conditioned rather than spatial: rollouts stop on 100% of trials with a length-tracking error of +0.0 +/- 0.0 s against the sampled target (100 of 100 exactly on target; N=100, T=0.2, untouched in-distribution test split).

In this report we describe the development of Command A, a powerful large language model purpose-built to excel at real-world enterprise use cases. Command A is an agent-optimised and multilingual-capable model, with support for 23 languages of global business, and a novel hybrid architecture balancing efficiency with top of the range performance. It offers best-in-class Retrieval Augmented Generation (RAG) capabilities with grounding and tool use to automate sophisticated business processes. These abilities are achieved through a decentralised training approach, including self-refinement algorithms and model merging techniques. We also include results for Command R7B which shares capability and architectural similarities to Command A. Weights for both models have been released for research purposes. This technical report details our original training pipeline and presents an extensive evaluation of our models across a suite of enterprise-relevant tasks and public benchmarks, demonstrating excellent performance and efficiency.

Flow-based 3D generation models typically require dozens of sampling steps during inference. Though few-step distillation methods, particularly Consistency Models (CMs), have achieved substantial advancements in accelerating 2D diffusion models, they remain under-explored for more complex 3D generation tasks. In this study, we propose a novel framework, MDT-dist, for few-step 3D flow distillation. Our approach is built upon a primary objective: distilling the pretrained model to learn the Marginal-Data Transport. Directly learning this objective needs to integrate the velocity fields, while this integral is intractable to be implemented. Therefore, we propose two optimizable objectives, Velocity Matching (VM) and Velocity Distillation (VD), to equivalently convert the optimization target from the transport level to the velocity and the distribution level respectively. Velocity Matching (VM) learns to stably match the velocity fields between the student and the teacher, but inevitably provides biased gradient estimates. Velocity Distillation (VD) further enhances the optimization process by leveraging the learned velocity fields to perform probability density distillation. When evaluated on the pioneer 3D generation framework TRELLIS, our method reduces sampling steps of each flow transformer from 25 to 1 or 2, achieving 0.68s (1 step x 2) and 0.94s (2 steps x 2) latency with 9.0x and 6.5x speedup on A800, while preserving high visual and geometric fidelity. Extensive experiments demonstrate that our method significantly outperforms existing CM distillation methods, and enables TRELLIS to achieve superior performance in few-step 3D generation.

Reinforcement learning (RL) post-training improves the reward alignment of flow-based generators, but often degrades perceptual quality in ways that are not captured by the reward proxy. We identify a simple structural signature of this drift: across three post-training methods (NFT, AWM, DPO), RL fine-tuning inflates the per-step velocity norm |v_θ| by 5% to 15% relative to the reference. A form of norm inflation has been studied in classifier-free guidance (CFG), where rescaling the velocity back to a reference norm at inference time can mitigate the resulting artifacts. However, this inference-time correction does not transfer cleanly to RL: rescaling v_θ to match |v_{ref}| at inference time neither improves reward nor fixes the quality degradation, because the inflation is co-adapted into the model weights. Furthermore, an adjoint sensitivity analysis shows that velocity magnitude rescaling carries no coherent first-order reward signal at the batch level, indicating that suppressing norm inflation is unlikely to remove a consistently reward-carrying component. Since inference-time renormalization fails while norm suppression carries no reward cost, training-time intervention is the appropriate strategy. Together, these findings motivate \methodname, a hinge penalty that activates only when |v_θ| exceeds |v_{ref}| and composes additively with any velocity-local base loss. Across two base models, three post-training methods, and two reward proxies, \methodname consistently improves MLLM-judged image quality and forensic realism while preserving reward, with gains that amplify under few-step inference and are not explained by early stopping.

The planning and control of a robot swarm in a complex environment have attracted increasing attention. To this end, the idea of virtual tubes has been taken up in our previous work. Specifically, a virtual tube with varying widths has been planned to avoid collisions with obstacles in a complex environment. Based on the planned virtual tube for a large number of speed-constrained robots, the average forward speed and density along the virtual tube are further planned in this paper to ensure safety and improve efficiency. Compared with the existing methods, the proposed method is based on global information and can be applied to traversing narrow spaces for speed-constrained robot swarms. Numerical simulations and experiments are conducted to show that the safety and efficiency of the passing-through process are improved. A video about simulations and experiments is available on https://youtu.be/lJHdMQMqSpc.

MeanFlow generators achieve fast few-step sampling by predicting average velocities over time intervals, making them attractive for efficient generation. Reinforcement learning (RL) has become a powerful way to align diffusion and flow models with human preferences and task-specific objectives. In particular, DiffusionNFT offers an efficient forward-process RL framework that does not require reverse-process trajectories or likelihood estimation. However, applying such RL methods to MeanFlow remains underexplored. DiffusionNFT optimizes instantaneous velocities, whereas MeanFlow samples with average velocities. To bridge this gap, we introduce MeanFlowNFT. Inspired by the MeanFlow identity, which bridges average and instantaneous velocities, we construct an induced instantaneous-velocity predictor. We apply the DiffusionNFT objective to this predictor, making reward optimization well-defined for MeanFlow. Sampling remains based on the average velocity, preserving MeanFlow's fast few-step generation. We further prove that MeanFlowNFT inherits DiffusionNFT's strict policy-improvement guarantee. Experiments on image and video generation show that MeanFlowNFT consistently improves baselines. Moreover, it outperforms prior state-of-the-art RL-tuned few-step generators on most metrics (6 of 8 on SD3.5-M), and can even surpass multi-step RL-tuned diffusion while using only a few sampling steps. For instance, on Wan 2.1, 4-step MeanFlowNFT reaches a VBench score of 84.33, surpassing 50-step LongCat-Video RL (82.57).

In robot manipulation, robot learning has become a prevailing approach. However, generative models within this field face a fundamental trade-off between the slow, iterative sampling of diffusion models and the architectural constraints of faster Flow-based methods, which often rely on explicit consistency losses. To address these limitations, we introduce MP1, which pairs 3D point-cloud inputs with the MeanFlow paradigm to generate action trajectories in one network function evaluation (1-NFE). By directly learning the interval-averaged velocity via the "MeanFlow Identity", our policy avoids any additional consistency constraints. This formulation eliminates numerical ODE-solver errors during inference, yielding more precise trajectories. MP1 further incorporates CFG for improved trajectory controllability while retaining 1-NFE inference without reintroducing structural constraints. Because subtle scene-context variations are critical for robot learning, especially in few-shot learning, we introduce a lightweight Dispersive Loss that repels state embeddings during training, boosting generalization without slowing inference. We validate our method on the Adroit and Meta-World benchmarks, as well as in real-world scenarios. Experimental results show MP1 achieves superior average task success rates, outperforming DP3 by 10.2% and FlowPolicy by 7.3%. Its average inference time is only 6.8 ms-19x faster than DP3 and nearly 2x faster than FlowPolicy. Our code is available at https://github.com/LogSSim/MP1.git.

Accurate aerodynamic modeling of satellites in very low Earth orbit (VLEO) requires gas-surface interaction (GSI) models that capture the full velocity spectrum from thermal to orbital speeds. Atmospheric particles initially strike spacecraft surfaces at hypersonic velocities of 6 000 - 10 000 m/s. Due to surface roughness and complex geometries, especially within air-breathing electric propulsion (ABEP) intake systems, multiple collisions occur, progressively reducing the particle velocities. A recent machine learning framework for deriving scattering kernels from molecular dynamics (MD) simulations has shown promise, but remains limited to high-velocity single impacts and possibly violates fundamental equilibrium principles such as detailed balance. This work extends this machine learning based scattering kernel to cover the complete velocity range using conditional normalizing flows trained with physics-informed constraints, enabling accurate modeling of multi-bounce scenarios in realistic VLEO applications. We train a conditional Real-valued Non-Volume Preserving (cRealNVP) model on expanded molecular dynamics simulations covering velocities from thermal to hypersonic speeds, incorporating a detailed balance loss term. The resulting model demonstrates improved accuracy compared to previous approaches even in the original high-velocity regime, while successfully capturing thermal-velocity scattering. Quantitative assessment shows that thermalization is approximated within acceptable tolerances. This framework provides essential capabilities for accurate ABEP intake optimization and VLEO mission planning while offering a general methodology applicable to broader rarefied gas dynamics problems requiring thermodynamic consistency.

Motion planning under dynamics constraints, i.e., kinodynamic planning, enables safe robot operation by generating dynamically feasible trajectories that the robot can accurately track. For high-\dof robots such as manipulators, sampling-based motion planners are commonly used, especially for complex tasks in cluttered environments. However, enforcing constraints on robot dynamics in such planners requires solving either challenging two-point boundary value problems (BVPs) or propagating robot dynamics over time, both of which are computational bottlenecks that drastically increase planning times. Meanwhile, recent efforts have shown that sampling-based motion planners can generate plans in microseconds using parallelization, but are limited to geometric paths. This paper develops AkinoPDF, a fast parallelized sampling-based kinodynamic motion planning technique for a broad class of differentially flat robot systems, including manipulators, ground and aerial vehicles, and more. Differential flatness allows us to transform the motion planning problem from the original state space to a flat output space, where an analytical time-parameterized solution of the BVP and dynamics integration can be obtained. A trajectory in the flat output space is then converted back to a closed-form dynamically feasible trajectory in the original state space, enabling fast validation via ``single instruction, multiple data" parallelism. Our method is fast, exact, and compatible with any sampling-based motion planner. We extensively verify the effectiveness of our approach in both simulated benchmarks and real experiments with cluttered and dynamic environments, requiring mere microseconds to milliseconds of planning time.

Long-horizon agentic tasks require an agent to modify an environment through a sequence of tool calls, with success determined by the final state. The standard recipe assigns a single outcome reward at the end and compares trajectories sampled for the same task. As a result, a group with no successful trajectory yields no training signal, failed attempts cannot be told apart by how close they came to completion, and turns that advance the task receive the same credit as turns that only query the environment. Prior work refines the unit of comparison from the trajectory to the step, or trains a reward model to supply intermediate signal: the former still derives its signal from final success alone, and the latter estimates it with a model. We observe that the acceptance checks that decide success can also be run on intermediate states, so progress is as verifiable as the outcome. We propose ProCredit, which turns this verified progress into credit: it reruns the acceptance checks after each turn, rewards the turn by its change in progress, and uses these rewards to assign credit both across attempts at the same task and across the turns within a trajectory. Starting from Qwen3.5 base models at three scales on AppWorld, ProCredit outperforms outcome-reward baselines and progress-based baselines in task completion rate at every scale on both test sets, exceeding the strongest outcome-reward baseline by 4.1 percentage points at 4B, and results in a second environment show the same direction of improvement. Ablations show that adding the final progress to the trajectory score alone does not improve performance: the gain comes from crediting progress to the turn where it occurs.

We present the results of high-resolution (sim1~au) Atacama Large Millimeter/submillimeter Array (ALMA) observations of the TW~Hya protoplanetary disk in the Band 6 dust continuum, as well as the ^13CO and C^18O J=2--1 emission lines. The primary focus of this study is to investigate the kinematics, internal morphology, and local gas environment of the prominent dust blob at a radius of 52~au. By comparing our 2021 data with archival observations from 2017, we detect the proper motion of the blob. The measured azimuthal velocity of 3.3pm0.9~km~s^{-1} is fully consistent with local Keplerian rotation. Combined with the lack of significant radial migration over the four-year baseline, this confirms that the structure is robustly co-moving with the disk system. Crucially, our high-resolution continuum map resolves the blob into a distinct double-peaked morphology separated by sim1.7~au azimuthally. We robustly validate this double-peaked substructure by reproducing it in the independent 2017 dataset using a sparse-modeling image reconstruction technique. We discuss potential physical origins for this double-peaked morphology, including an inclined circumplanetary disk with an inner dust cavity, the roots of planet-induced spiral arms, or alternative hydrodynamic scenarios that do not involve an actively accreting planet such as the U-turn trajectory of secondary dust or a short-lived hydrodynamic gas vortex. We detect no compact gas emission counterparts associated with the continuum blob. Since these CO lines likely trace optically thick upper atmospheric layers, the absence of localized vertical gas perturbations suggests that if an embedded planet is responsible for the dust structure, its mass must be exceptionally low.

Trajectory planning is commonly used as part of a local planner in autonomous driving. This paper considers the problem of planning a continuous-curvature-rate trajectory between fixed start and goal states that minimizes a tunable trade-off between passenger comfort and travel time. The problem is an instance of infinite dimensional optimization over two continuous functions: a path, and a velocity profile. We propose a simplification of this problem that facilitates the discretization of both functions. This paper also proposes a method to quickly generate minimal-length paths between start and goal states based on a single tuning parameter: the second derivative of curvature. Furthermore, we discretize the set of velocity profiles along a given path into a selection of acceleration way-points along the path. Gradient-descent is then employed to minimize cost over feasible choices of the second derivative of curvature, and acceleration way-points, resulting in a method that repeatedly solves the path and velocity profiles in an iterative fashion. Numerical examples are provided to illustrate the benefits of the proposed methods.