Daily Papers

On-policy distillation (OPD) trains a student language model on its own responses, guided by a fixed teacher. Generating these responses is expensive, so systems use quantized inference and asynchronous rollouts to reduce the cost. Both, however, introduce training-inference mismatch between the rollout engine and the model being trained. Such mismatch can destabilize reinforcement learning (RL), but its effects on OPD remain unclear. This paper investigates how much mismatch OPD tolerates, where its effects arise, and how training systems can use this tolerance. Measuring all mismatch sources on one scale, we examine quantization across three student-teacher pairs, with additional tests of weight staleness and injected noise on one pair. OPD tolerates substantial mismatch without meaningful loss of training quality but degrades at higher levels, revealing an empirical mismatch budget. Both the quality cost of mismatch and the mismatch introduced by quantization depend on the model, with some layers particularly sensitive to reduced precision. In controlled comparisons, OPD remains stable under rollout configurations that destabilize RL methods. Under weight noise, mismatch also shifts the prefixes reached during generation, introducing errors that per-token corrections cannot address. To put these findings into practice, we introduce a lightweight admission check that screens rollout configurations against a calibrated budget without requiring a full training run for each candidate. Model-specific FP8 recipes preserve training quality while providing capacity for at least 1.93times as many KV-cache tokens as BF16. Combining FP8 with asynchronous rollouts reaches the same training quality 1.62times sooner than synchronous BF16 training. Code is available at https://github.com/benyucong/train-inference-mismatch-opd

Deep neural networks are known to exhibit a spectral learning bias, wherein low-frequency components are learned early in training, while high-frequency modes emerge more gradually in later epochs. However, when the target signal lacks low-frequency components and is dominated by broadband high frequencies, training suffers from a 'spectral bottleneck', and the model fails to reconstruct the entire signal, including the frequency components that lie within the network's representational capacity. We examine such a scenario in the context of implicit neural representations (INRs) with sinusoidal representation networks (SIRENs), focusing on the challenge of fitting high-frequency-dominant signals that are susceptible to spectral bottleneck. To effectively fit any target signal irrespective of it's frequency content, we propose a generalized target-aware 'weight perturbation scheme' (WINNER - weight initialization with noise for neural representations) for network initialization. The scheme perturbs uniformly initialized weights with Gaussian noise, where the noise scales are adaptively determined by the spectral centroid of the target signal. We show that the noise scales can provide control over the spectra of network activations and the eigenbasis of the empirical neural tangent kernel. This method not only addresses the spectral bottleneck but also yields faster convergence and with improved representation accuracy, outperforming state-of-the-art approaches in audio fitting and achieving notable gains in image fitting and denoising tasks. Beyond signal reconstruction, our approach opens new directions for adaptive weight initialization strategies in computer vision and scientific machine learning.

Point cloud registration is an essential step for free-form blade reconstruction in industrial measurement. Nonetheless, measuring defects of the 3D acquisition system unavoidably result in noisy and incomplete point cloud data, which renders efficient and accurate registration challenging. In this paper, we propose a novel global registration method that is based on the minimum potential energy (MPE) method to address these problems. The basic strategy is that the objective function is defined as the minimum potential energy optimization function of the physical registration system. The function distributes more weight to the majority of inlier points and less weight to the noise and outliers, which essentially reduces the influence of perturbations in the mathematical formulation. We decompose the solution into a globally optimal approximation procedure and a fine registration process with the trimmed iterative closest point algorithm to boost convergence. The approximation procedure consists of two main steps. First, according to the construction of the force traction operator, we can simply compute the position of the potential energy minimum. Second, to find the MPE point, we propose a new theory that employs two flags to observe the status of the registration procedure. We demonstrate the performance of the proposed algorithm on four types of blades. The proposed method outperforms the other global methods in terms of both accuracy and noise resistance.

The surge in interest and application of large language models (LLMs) has sparked a drive to fine-tune these models to suit specific applications, such as finance and medical science. However, concerns regarding data privacy have emerged, especially when multiple stakeholders aim to collaboratively enhance LLMs using sensitive data. In this scenario, federated learning becomes a natural choice, allowing decentralized fine-tuning without exposing raw data to central servers. Motivated by this, we investigate how data privacy can be ensured in LLM fine-tuning through practical federated learning approaches, enabling secure contributions from multiple parties to enhance LLMs. Yet, challenges arise: 1) despite avoiding raw data exposure, there is a risk of inferring sensitive information from model outputs, and 2) federated learning for LLMs incurs notable communication overhead. To address these challenges, this article introduces DP-LoRA, a novel federated learning algorithm tailored for LLMs. DP-LoRA preserves data privacy by employing a Gaussian mechanism that adds noise in weight updates, maintaining individual data privacy while facilitating collaborative model training. Moreover, DP-LoRA optimizes communication efficiency via low-rank adaptation, minimizing the transmission of updated weights during distributed training. The experimental results across medical, financial, and general datasets using various LLMs demonstrate that DP-LoRA effectively ensures strict privacy constraints while minimizing communication overhead.

This paper explores the scenarios under which an attacker can claim that 'Noise and access to the softmax layer of the model is all you need' to steal the weights of a convolutional neural network whose architecture is already known. We were able to achieve 96% test accuracy using the stolen MNIST model and 82% accuracy using the stolen KMNIST model learned using only i.i.d. Bernoulli noise inputs. We posit that this theft-susceptibility of the weights is indicative of the complexity of the dataset and propose a new metric that captures the same. The goal of this dissemination is to not just showcase how far knowing the architecture can take you in terms of model stealing, but to also draw attention to this rather idiosyncratic weight learnability aspects of CNNs spurred by i.i.d. noise input. We also disseminate some initial results obtained with using the Ising probability distribution in lieu of the i.i.d. Bernoulli distribution.

This paper introduces a novel filter, the Adaptive Weight Modified Riesz Mean Filter (AWMRmF), designed for the effective removal of high-density salt and pepper noise (SPN). AWMRmF integrates a pixel weight function and adaptivity condition inspired by the Different Adaptive Modified Riesz Mean Filter (DAMRmF). In my simulations, I evaluated the performance of AWMRmF against established filters such as Adaptive Frequency Median Filter (AFMF), Adaptive Weighted Mean Filter (AWMF), Adaptive Cesaro Mean Filter (ACmF), Adaptive Riesz Mean Filter (ARmF), and Improved Adaptive Weighted Mean Filter (IAWMF). The assessment was conducted on 26 typical test images, varying noise levels from 60% to 95%. The findings indicate that, in terms of both Peak Signal to Noise Ratio (PSNR) and Structural Similarity (SSIM) metrics, AWMRmF outperformed other state-of-the-art filters. Furthermore, AWMRmF demonstrated superior performance in mean PSNR and SSIM results as well.

Conditional diffusion models have shown remarkable performance in various generative tasks, but training them requires large-scale datasets that often contain noise in conditional inputs, a.k.a. noisy labels. This noise leads to condition mismatch and quality degradation of generated data. This paper proposes Transition-aware weighted Denoising Score Matching (TDSM) for training conditional diffusion models with noisy labels, which is the first study in the line of diffusion models. The TDSM objective contains a weighted sum of score networks, incorporating instance-wise and time-dependent label transition probabilities. We introduce a transition-aware weight estimator, which leverages a time-dependent noisy-label classifier distinctively customized to the diffusion process. Through experiments across various datasets and noisy label settings, TDSM improves the quality of generated samples aligned with given conditions. Furthermore, our method improves generation performance even on prevalent benchmark datasets, which implies the potential noisy labels and their risk of generative model learning. Finally, we show the improved performance of TDSM on top of conventional noisy label corrections, which empirically proving its contribution as a part of label-noise robust generative models. Our code is available at: https://github.com/byeonghu-na/tdsm.

While open-weight models have enjoyed steady progress in capabilities and wide adoption across multiple domains, their safety remains an important concern. One key feature is the ability to refuse or deflect harmful, malicious, or insensitive prompts. In this paper, we expose safety vulnerabilities across six common open-weight LLMs of various sizes that consistently lead to harmful or unsafe responses on the JailbreakBench benchmark dataset. Our proposed attack, Perturbed Embedding Vector (PEV), is a simple and fast "jailbreaking" technique that is cheaper than prior approaches, which typically require gradient computations, per-prompt optimizations, or altering internal weights of the models. PEV just adds independent Gaussian noise in the embedding vector representations of the prompt, with no need for further manipulations. To generate unsafe responses, we repeatedly sample additive noise from this distribution. In our experiments, we observe that the average compute cost to get the first successful attack is up to an order of magnitude less than previous attacks. The first successful jailbreak on a new prompt typically arrives within one minute on every tested model, and PEV generates unsafe responses across all models for all prompts in JailbreakBench. No other tested method achieves such results, despite them taking longer to run. More broadly, we believe that understanding the behavior of LLMs under perturbations in the embedding vectors is an important research direction: while perturbations constitute a major security risk, they can also serve as a valuable tool for exploring the dynamical behavior of such models.

Pre-training on large-scale datasets and then fine-tuning on downstream tasks have become a standard practice in deep learning. However, pre-training data often contain label noise that may adversely affect the generalization of the model. This paper aims to understand the nature of noise in pre-training datasets and to mitigate its impact on downstream tasks. More specifically, through extensive experiments of supervised pre-training models on synthetic noisy ImageNet-1K and YFCC15M datasets, we demonstrate that while slight noise in pre-training can benefit in-domain (ID) transfer performance, where the training and testing data share the same distribution, it always deteriorates out-of-domain (OOD) performance, where training and testing data distribution are different. We empirically verify that the reason behind is noise in pre-training shapes the feature space differently. We then propose a light-weight black-box tuning method (NMTune) to affine the feature space to mitigate the malignant effect of noise and improve generalization on both ID and OOD tasks, considering one may not be able to fully fine-tune or even access the pre-trained models. We conduct practical experiments on popular vision and language models that are pre-trained on noisy data for evaluation of our approach. Our analysis and results show the importance of this interesting and novel research direction, which we term Noisy Model Learning.

Ever-growing scale of large language models (LLMs) is pushing for improved efficiency, favoring fully quantized training (FQT) over BF16. While FQT accelerates training, it faces consistency challenges and requires searching over an exponential number of cases, each needing over 200B tokens to ensure stability. Pseudo-quantization training (PQT) addresses the issues of FQT, although it is not well-studied. We explore the practical implications of PQT in detail and propose a noise distribution R that is floating-point (FP)-friendly, with ideal properties including stochastic precision annealing. As a result, the proposed method serves as an effective theoretical foundation for low-precision FP parameters through PQT, utilizing efficient fake quantization via an addition and subsequent FP casting. We demonstrate that Gaussian weight sampling is (1) scalable: supports low-precision FP parameters down to FP6 and high-precision noise up to 9-bit with BF16 operator. The proposed method is (2) efficient: incurring computational overhead as low as 1.40\% on the A100 GPU in terms of Llama2 training tokens per second, and requiring 2 bytes per parameter in GPU memory. We demonstrate that PQT with Gaussian weight sampling is (3) stable: closely following or even surpassing performance of the BF16 baseline while pre-training GPT2 and Llama2 models with up to 1B parameters and 300B tokens.

Low-light video enhancement (LLVE) is challenging due to noise, low contrast, and color degradations. Learning-based approaches offer fast inference but still struggle with heavy noise in real low-light scenes, primarily due to limitations in effectively leveraging temporal information. In this paper, we address this issue with DWTA-Net, a novel two-stage framework that jointly exploits short- and long-term temporal cues. Stage I employs Visual State-Space blocks for multi-frame alignment, recovering brightness, color, and structure with local consistency. Stage II introduces a recurrent refinement module with dynamic weight-based temporal aggregation guided by optical flow, adaptively balancing static and dynamic regions. A texture-adaptive loss further preserves fine details while promoting smoothness in flat areas. Experiments on real-world low-light videos show that DWTA-Net effectively suppresses noise and artifacts, delivering superior visual quality compared with state-of-the-art methods.

Post-training quantization reduces the deployment cost of large language models, yet how severely a quantized model degrades is not determined by bit-width alone. We systematically study weight-only post-training quantization across bit-widths, quantization methods, model scales and downstream tasks on multiple model families. We observe that such degradation varies substantially across these factors: 4-bit quantization usually preserves performance, 2-bit often causes broad degradation, and at 3-bit, degradation becomes apparent but varies markedly with task type, quantization method and model scale. To explain this variability, we use the signal-to-noise ratio (SNR) to measure how strongly quantization perturbs full-precision representations. We trace degradation back to two linked processes: how quantization errors arise within individual modules, and how they accumulate across layers. First, a source SNR decomposition shows that newly introduced errors depend on three factors: the magnitude of the weight error, the strength of the task-specific signal, and how strongly the quantization error aligns with task-specific activations. Different factors affect these components in distinct ways. Second, a cross-layer propagation analysis shows that these errors can be attenuated, preserved, or amplified as they pass across layers, and that larger models benefit from weaker error amplification. Together, these results establish that quantization degradation is governed by how errors are introduced at the source and how they accumulate across the network.

We present weight normalization: a reparameterization of the weight vectors in a neural network that decouples the length of those weight vectors from their direction. By reparameterizing the weights in this way we improve the conditioning of the optimization problem and we speed up convergence of stochastic gradient descent. Our reparameterization is inspired by batch normalization but does not introduce any dependencies between the examples in a minibatch. This means that our method can also be applied successfully to recurrent models such as LSTMs and to noise-sensitive applications such as deep reinforcement learning or generative models, for which batch normalization is less well suited. Although our method is much simpler, it still provides much of the speed-up of full batch normalization. In addition, the computational overhead of our method is lower, permitting more optimization steps to be taken in the same amount of time. We demonstrate the usefulness of our method on applications in supervised image recognition, generative modelling, and deep reinforcement learning.

In this work, we introduce a fast implementation of the minimum-weight perfect matching (MWPM) decoder, the most widely used decoder for several important families of quantum error correcting codes, including surface codes. Our algorithm, which we call sparse blossom, is a variant of the blossom algorithm which directly solves the decoding problem relevant to quantum error correction. Sparse blossom avoids the need for all-to-all Dijkstra searches, common amongst MWPM decoder implementations. For 0.1% circuit-level depolarising noise, sparse blossom processes syndrome data in both X and Z bases of distance-17 surface code circuits in less than one microsecond per round of syndrome extraction on a single core, which matches the rate at which syndrome data is generated by superconducting quantum computers. Our implementation is open-source, and has been released in version 2 of the PyMatching library.

Straight-through estimator (STE), which enables the gradient flow over the non-differentiable function via approximation, has been favored in studies related to quantization-aware training (QAT). However, STE incurs unstable convergence during QAT, resulting in notable quality degradation in low precision. Recently, pseudoquantization training has been proposed as an alternative approach to updating the learnable parameters using the pseudo-quantization noise instead of STE. In this study, we propose a novel noise proxy-based integrated pseudoquantization (NIPQ) that enables unified support of pseudoquantization for both activation and weight by integrating the idea of truncation on the pseudo-quantization framework. NIPQ updates all of the quantization parameters (e.g., bit-width and truncation boundary) as well as the network parameters via gradient descent without STE instability. According to our extensive experiments, NIPQ outperforms existing quantization algorithms in various vision and language applications by a large margin.

Developing large language models is expensive and involves making decisions with small experiments, typically by evaluating on large, multi-task evaluation suites. In this work, we analyze specific properties which make a benchmark more reliable for such decisions, and interventions to design higher-quality evaluation benchmarks. We introduce two key metrics that show differences in current benchmarks: signal, a benchmark's ability to separate better models from worse models, and noise, a benchmark's sensitivity to random variability between training steps. We demonstrate that benchmarks with a better signal-to-noise ratio are more reliable when making decisions at small scale, and those with less noise have lower scaling law prediction error. These results suggest that improving signal or noise will lead to more useful benchmarks, so we introduce three interventions designed to directly affect signal or noise. For example, we propose that switching to a metric that has better signal and noise (e.g., perplexity rather than accuracy) leads to better reliability and improved scaling law error. We also find that filtering noisy subtasks, to improve an aggregate signal-to-noise ratio, leads to more reliable multi-task evaluations. We also find that averaging the output of a model's intermediate checkpoints to reduce noise leads to consistent improvements. We conclude by recommending that those creating new benchmarks, or selecting which existing benchmarks to use, aim for high signal and low noise. We use 30 benchmarks for these experiments, and 375 open-weight language models from 60M to 32B parameters, resulting in a new, publicly available dataset of 900K evaluation benchmark results, totaling 200M instances.

Significant recent work has studied the ability of gradient descent to recover a hidden planted direction θ^star in S^{d-1} in different high-dimensional settings, including tensor PCA and single-index models. The key quantity that governs the ability of gradient descent to traverse these landscapes is the information exponent k^star (Ben Arous et al., (2021)), which corresponds to the order of the saddle at initialization in the population landscape. Ben Arous et al., (2021) showed that n gtrsim d^{max(1, k^star-1)} samples were necessary and sufficient for online SGD to recover θ^star, and Ben Arous et al., (2020) proved a similar lower bound for Langevin dynamics. More recently, Damian et al., (2023) showed it was possible to circumvent these lower bounds by running gradient descent on a smoothed landscape, and that this algorithm succeeds with n gtrsim d^{max(1, k^star/2)} samples, which is optimal in the worst case. This raises the question of whether it is possible to achieve the same rate without explicit smoothing. In this paper, we show that Langevin dynamics can succeed with n gtrsim d^{ k^star/2 } samples if one considers the average iterate, rather than the last iterate. The key idea is that the combination of noise-injection and iterate averaging is able to emulate the effect of landscape smoothing. We apply this result to both the tensor PCA and single-index model settings. Finally, we conjecture that minibatch SGD can also achieve the same rate without adding any additional noise.

Training-free object removal commonly redirects self-attention away from the target region, but on few-step distilled diffusion models this often leaves object-shaped residuals. We identify a temporal mismatch: a structured prediction forms inside the mask at the first forward, and the short trajectory offers few later chances to revise it, while attention rerouting acts mainly in later steps. Across four distilled backbones, magnitude-matched single-forward interventions show that background-directed state correction affects the final result more than attention rerouting. We therefore propose ReState, which corrects the masked clean prediction toward background evidence retrieved from the input using a noise-level-aware weight that vanishes at the final forward. ReState retains object-excluding attention as a complementary constraint and adds no denoiser evaluations. Across two paired benchmarks and two few-step backbones, ReState achieves the best masked PSNR, SSIM, and LPIPS among training-free methods, improving PSNR by 3.17 dB on average over the strongest baseline. On OBER-Test, it also outperforms the 50-step attention-forcing reference on all three metrics at 6.7x lower latency. The same configuration transfers to two additional distilled backbones without retuning. Project page: https://tdrlee.github.io/ReState

There is a constant need for high-performing and computationally efficient neural network models for image super-resolution: computationally efficient models can be used via low-capacity devices and reduce carbon footprints. One way to obtain such models is to compress models, e.g. quantization. Another way is a neural architecture search that automatically discovers new, more efficient solutions. We propose a novel quantization-aware procedure, the QuantNAS that combines pros of these two approaches. To make QuantNAS work, the procedure looks for quantization-friendly super-resolution models. The approach utilizes entropy regularization, quantization noise, and Adaptive Deviation for Quantization (ADQ) module to enhance the search procedure. The entropy regularization technique prioritizes a single operation within each block of the search space. Adding quantization noise to parameters and activations approximates model degradation after quantization, resulting in a more quantization-friendly architectures. ADQ helps to alleviate problems caused by Batch Norm blocks in super-resolution models. Our experimental results show that the proposed approximations are better for search procedure than direct model quantization. QuantNAS discovers architectures with better PSNR/BitOps trade-off than uniform or mixed precision quantization of fixed architectures. We showcase the effectiveness of our method through its application to two search spaces inspired by the state-of-the-art SR models and RFDN. Thus, anyone can design a proper search space based on an existing architecture and apply our method to obtain better quality and efficiency. The proposed procedure is 30\% faster than direct weight quantization and is more stable.

Deep learning classifiers face significant challenges when dealing with heterogeneous multi-modal and multi-organ biomedical datasets. The low-level feature distinguishability limited to imaging-modality hinders the classifiers' ability to learn high-level semantic relationships, resulting in sub-optimal performance. To address this issue, image augmentation strategies are employed as regularization techniques. While additive noise input during network training is a well-established augmentation as regularization method, modern pipelines often favor more robust techniques such as dropout and weight decay. This preference stems from the observation that combining these established techniques with noise input can adversely affect model performance. In this study, we propose a novel pretraining pipeline that learns to generate conditional noise mask specifically tailored to improve performance on multi-modal and multi-organ datasets. As a reinforcement learning algorithm, our approach employs a dual-component system comprising a very light-weight policy network that learns to sample conditional noise using a differentiable beta distribution as well as a classifier network. The policy network is trained using the reinforce algorithm to generate image-specific noise masks that regularize the classifier during pretraining. A key aspect is that the policy network's role is limited to obtaining an intermediate (or heated) model before fine-tuning. During inference, the policy network is omitted, allowing direct comparison between the baseline and noise-regularized models. We conducted experiments and related analyses on RadImageNet datasets. Results demonstrate that fine-tuning the intermediate models consistently outperforms conventional training algorithms on both classification and generalization to unseen concept tasks.

Latent, or silent, reasoning lets language models carry out intermediate computation in continuous vector space instead of words, and is widely assumed to function as an internal scratchpad the model consults during inference. Whether that assumption survives reinforcement learning has not been tested directly: existing causal analyses of latent reasoning are confined to math and logic tasks, comparing reliance on thoughts within one checkpoint, never before and after RL. We train a chess-playing model through a staged latent-reasoning curriculum followed by reinforcement learning, and find legality climbs monotonically to 61% (from a 48% pre-RL baseline) while checkmate confabulation is eliminated entirely. To locate this gain, we run a six-condition causal intervention suite on the same model before and after RL: substituting or noising the thought vectors leaves performance unchanged, ablating them costs only mild degradation, and only exact-zero vectors cause collapse. This robustness gap is itself the finding: under exact-zero corruption, legality collapses to 1% pre-RL versus 9% post-RL, a gap that survives correction across the full battery. A 10x-larger replication of the post-RL checkpoint's own battery confirms this: removing the thoughts, with or without restoring sequence length, also reaches significance; substitution and noise remain indistinguishable from baseline. RL appears to add robustness to disruption, not reliance on thought content. These results push back against the field's default assumption that latent thoughts function as an actively consulted inference-time scratchpad, and instead indicate latent reasoning's principal effect here is shaping the model's parameters during training. We also demonstrate a working RL gain in chess, where multiple groups report the same latent-reasoning-plus-RL recipe failing to improve accuracy over SFT.

Agent performance depends jointly on the model parameters and the executable harness code that manages context and control flow. Optimizing either component in isolation can leave the system bottlenecked by its frozen counterpart: weight updates can change which harness is effective, while harness updates can change which model capabilities are exposed. Existing joint-adaptation methods optimize weights and textual prompts but leave the broader harness fixed. We propose Weight-Harness Alternating LEarning (WHALE), a simple recipe that alternates two phases: updating the model under the current harness, then searching for a better harness under the updated model. We instantiate these two phases with online rejection-sampling fine-tuning and Meta-Harness, respectively. When to switch is a key design choice: to separate real improvements from noise without over-optimizing against a changing counterpart, WHALE uses either fixed phase durations or an adaptive patience rule over training signals. Using Qwen3.5-2B/4B agents across three domains (search question answering, mathematical reasoning, and chess puzzles), WHALE outperforms weight-only, harness-only, and Fast-Slow Training by 4.15-24.38 percentage points in best mean@8 accuracy. Either component can be the bottleneck: harness search matches peak weight-only accuracy with far fewer rollouts in SearchQA, but improves math accuracy only after a weight update. Small interleaved updates also outperform stagewise weight-then-harness optimization in accuracy and rollout cost. The code is available at https://github.com/krafton-ai/WHALE.

Efficient decoding to estimate error locations from outcomes of syndrome measurement is the prerequisite for quantum error correction. Decoding in presence of circuit-level noise including measurement errors should be considered in case of actual quantum computing devices. In this work, we develop a decoder for circuit-level noise that solves the error estimation problems as Ising-type optimization problems. We confirm that the threshold theorem in the surface code under the circuitlevel noise is reproduced with an error threshold of approximately 0.4%. We also demonstrate the advantage of the decoder through which the Y error detection rate can be improved compared with other matching-based decoders. Our results reveal that a lower logical error rate can be obtained using our algorithm compared with that of the minimum-weight perfect matching algorithm.

Analog compute-in-memory (CIM) arrays have emerged as a promising substrate for energy-efficient LLM inference, particularly for weight-stationary computations in linear layers. However, extending analog CIM to attention mechanisms introduces a fundamental challenge: KV cache operations demand repeated in-situ weight updates, and the resulting mismatch with the weight-stationary paradigm exposes dynamic computations to significant hardware noise, a critical problem that remains largely unexplored. In this paper, we present the first systematic study of dynamic attention computation on analog CIM arrays, revealing that initial and recent tokens exhibit disproportionate vulnerability to hardware noise. Motivated by this token-level insight, we propose a hierarchical token protection strategy that keeps sink tokens and a sliding recent-token window on a higher-precision digital path while processing the bulk KV cache on analog CIM. A co-designed scheduler combines analog programming, ownership transition, and bulk-MVM tile formation to bound digital overhead. Evaluations on nine LLMs show that our approach lowers average perplexity under analog noise from 33.91 to 11.95, close to the clean baseline of 11.06, while improving dynamic-KV programming-row utilization from 23.1\% to 91.2\%.

Depth enhancement, which uses RGB images as guidance to convert raw signals from dToF into high-precision, dense depth maps, is a critical task in computer vision. Although existing super-resolution-based methods show promising results on public datasets, they often rely on idealized assumptions like accurate region correspondences and reliable dToF inputs, overlooking calibration errors that cause misalignment and anomaly signals inherent to dToF imaging, limiting real-world applicability. To address these challenges, we propose a novel completion-based method, named DEPTHOR, featuring advances in both the training strategy and model architecture. First, we propose a method to simulate real-world dToF data from the accurate ground truth in synthetic datasets to enable noise-robust training. Second, we design a novel network that incorporates monocular depth estimation (MDE), leveraging global depth relationships and contextual information to improve prediction in challenging regions. On the ZJU-L5 dataset, our training strategy significantly enhances depth completion models, achieving results comparable to depth super-resolution methods, while our model achieves state-of-the-art results, improving Rel and RMSE by 27% and 18%, respectively. On a more challenging set of dToF samples we collected, our method outperforms SOTA methods on preliminary stereo-based GT, improving Rel and RMSE by 23% and 22%, respectively. Our Code is available at https://github.com/ShadowBbBb/Depthor

We introduce Delta-Aware Quantization (DAQ), a data-free post-training quantization framework that preserves the knowledge acquired during post-training. Standard quantization objectives minimize reconstruction error but are agnostic to the base model, allowing quantization noise to disproportionately corrupt the small-magnitude parameter deltas (ΔW) that encode post-training behavior -- an effect we analyze through the lens of quantization as implicit regularization. DAQ replaces reconstruction-based objectives with two delta-aware metrics -- Sign Preservation Rate and Cosine Similarity -- that directly optimize for directional fidelity of ΔW, requiring only the base and post-trained weight matrices. In a pilot FP8 study, DAQ recovers style-specific capabilities lost under standard quantization while maintaining general performance.

Instruction-following language models can comply with requests that conflict with intended behaviors and safety alignment. We introduce a training-free weight-editing approach for reducing compliance with targeted undesirable instructions. Our method needs only forward passes on a small set of prompt pairs per target behavior, and because the edit is stored in the model's weights, changing or deleting instructions in the prompt cannot undo the weight modification. We evaluate the approach on two target harmful behaviors across five instruction-tuned models: instructed falsehood and instructed sexism. On two instructed-lying benchmarks, it improves mean honest response rates by 6.2 and 4.6 percentage points over the strongest alternative, significantly on three of the five models and within noise on the other two. In a controlled study of seven prompt formats, it maintains higher honest-response rates than single-layer activation steering when orders to lie arrive in single-turn formats not used to construct the edit. For instructed sexism, it reduces the mean sexist-response rate from 57.9% to 24.3%; combining the edit with a fairness prompt reduces it further to 11.9%. These results establish our contrast-based weight editing approach as an effective training-free intervention in two distinct behavioral domains, supporting its use both independently and alongside prompt-based safeguards.

In this paper we study the effects of quantization in DNN training. We hypothesize that weight quantization is a form of regularization and the amount of regularization is correlated with the quantization level (precision). We confirm our hypothesis by providing analytical study and empirical results. By modeling weight quantization as a form of additive noise to weights, we explore how this noise propagates through the network at training time. We then show that the magnitude of this noise is correlated with the level of quantization. To confirm our analytical study, we performed an extensive list of experiments summarized in this paper in which we show that the regularization effects of quantization can be seen in various vision tasks and models, over various datasets. Based on our study, we propose that 8-bit quantization provides a reliable form of regularization in different vision tasks and models.

Applying weight decay (WD) to matrix layers is standard practice in large-language-model pretraining. Prior work suggests that stochastic gradient noise induces a Brownian-like expansion of the weight matrices W, whose growth is counteracted by WD, leading to a WD-noise equilibrium with a certain weight norm ||W||. In this work, we view the equilibrium norm as a harmful artifact of the training procedure, and address it by introducing learnable multipliers to learn the optimal scale. First, we attach a learnable scalar multiplier to W and confirm that the WD-noise equilibrium norm is suboptimal: the learned scale adapts to data and improves performance. We then argue that individual row and column norms are similarly constrained, and free their scale by introducing learnable per-row and per-column multipliers. Our method can be viewed as a learnable, more expressive generalization of muP multipliers. It outperforms a well-tuned muP baseline, reduces the computational overhead of multiplier tuning, and surfaces practical questions such as forward-pass symmetries and the width-scaling of the learned multipliers. Finally, we validate learnable multipliers with both Adam and Muon optimizers, where it shows improvement in downstream evaluations matching the improvement of the switching from Adam to Muon.

Accurate question answering (QA) in disaster management requires reasoning over uncertain and conflicting information, a setting poorly captured by existing benchmarks built on clean evidence. We introduce DisastQA, a large-scale benchmark of 3,000 rigorously verified questions (2,000 multiple-choice and 1,000 open-ended) spanning eight disaster types. The benchmark is constructed via a human-LLM collaboration pipeline with stratified sampling to ensure balanced coverage. Models are evaluated under varying evidence conditions, from closed-book to noisy evidence integration, enabling separation of internal knowledge from reasoning under imperfect information. For open-ended QA, we propose a human-verified keypoint-based evaluation protocol emphasizing factual completeness over verbosity. Experiments with 20 models reveal substantial divergences from general-purpose leaderboards such as MMLU-Pro. While recent open-weight models approach proprietary systems in clean settings, performance degrades sharply under realistic noise, exposing critical reliability gaps for disaster response. All code, data, and evaluation resources are available at https://github.com/TamuChen18/DisastQA_open.

In this work, we address dynamic view synthesis from monocular videos as an inverse problem in a training-free setting. By redesigning the noise initialization phase of a pre-trained video diffusion model, we enable high-fidelity dynamic view synthesis without any weight updates or auxiliary modules. We begin by identifying a fundamental obstacle to deterministic inversion arising from zero-terminal signal-to-noise ratio (SNR) schedules and resolve it by introducing a novel noise representation, termed K-order Recursive Noise Representation. We derive a closed form expression for this representation, enabling precise and efficient alignment between the VAE-encoded and the DDIM inverted latents. To synthesize newly visible regions resulting from camera motion, we introduce Stochastic Latent Modulation, which performs visibility aware sampling over the latent space to complete occluded regions. Comprehensive experiments demonstrate that dynamic view synthesis can be effectively performed through structured latent manipulation in the noise initialization phase.

Large language model (LLM) agents are increasingly tasked with complex real-world analysis (e.g., in financial forecasting, scientific discovery), yet their reasoning suffers from stochastic instability and lacks a verifiable, compositional structure. To address this, we introduce Analytica, a novel agent architecture built on the principle of Soft Propositional Reasoning (SPR). SPR reframes complex analysis as a structured process of estimating the soft truth values of different outcome propositions, allowing us to formally model and minimize the estimation error in terms of its bias and variance. Analytica operationalizes this through a parallel, divide-and-conquer framework that systematically reduces both sources of error. To reduce bias, problems are first decomposed into a tree of subpropositions, and tool-equipped LLM grounder agents are employed, including a novel Jupyter Notebook agent for data-driven analysis, that help to validate and score facts. To reduce variance, Analytica recursively synthesizes these grounded leaves using robust linear models that average out stochastic noise with superior efficiency, scalability, and enable interactive "what-if" scenario analysis. Our theoretical and empirical results on economic, financial, and political forecasting tasks show that Analytica improves 15.84% accuracy on average over diverse base models, achieving 71.06% accuracy with the lowest variance of 6.02% when working with a Deep Research grounder. Our Jupyter Notebook grounder shows strong cost-effectiveness that achieves a close 70.11% accuracy with 90.35% less cost and 52.85% less time. Analytica also exhibits highly noise-resilient and stable performance growth as the analysis depth increases, with a near-linear time complexity, as well as good adaptivity to open-weight LLMs and scientific domains.

Speculative decoding has been treated purely as a systems optimization that speeds up large language model decoding without changing the model behavior. Under this view, the growing effort to train better draft models has been focused solely on acceptance rate. We argue that this view does not hold true for long-horizon agent reasoning. Measuring frontier open-weight models on complex agentic tasks with different speculative decoding approaches, we found that numerical noise grows within verification windows, and the draft acceptance results of the thinking process can change the output distribution of the model after 30 steps, thus noticeably influencing the reasoning accuracy of long-horizon agents in random directions. In this work, we improve the reasoning capability of target models by controlling such noise. While we cannot change the overall token distribution verified by the target model, we can encode critical reasoning with highest precision by training the draft model to be rejected. We identify these points in agent traces and train the draft model to favor adversarial preference. At inference the trained draft and the target part ways precisely at these decision points, verification restarts, so that critical thinking tokens are sampled from the target model and encoded under its least noisy conditions. This approach makes critical reasoning better indexed and more durable over a long horizon. On complex agentic coding benchmarks, our approach raises end-to-end success rate with no change to the target model or its output distribution. Our results recast the speculative decoding mechanism from a pure accelerator into an active allocator for context precision that improves the accuracy of long-horizon agents by training 0.06% to 0.28% of hosted parameters.

Real-world single image denoising is crucial and practical in computer vision. Bayesian inversions combined with score priors now have proven effective for single image denoising but are limited to white Gaussian noise. Moreover, applying existing score-based methods for real-world denoising requires not only the explicit train of score priors on the target domain but also the careful design of sampling procedures for posterior inference, which is complicated and impractical. To address these limitations, we propose a score priors-guided deep variational inference, namely ScoreDVI, for practical real-world denoising. By considering the deep variational image posterior with a Gaussian form, score priors are extracted based on easily accessible minimum MSE Non-i.i.d Gaussian denoisers and variational samples, which in turn facilitate optimizing the variational image posterior. Such a procedure adaptively applies cheap score priors to denoising. Additionally, we exploit a Non-i.i.d Gaussian mixture model and variational noise posterior to model the real-world noise. This scheme also enables the pixel-wise fusion of multiple image priors and variational image posteriors. Besides, we develop a noise-aware prior assignment strategy that dynamically adjusts the weight of image priors in the optimization. Our method outperforms other single image-based real-world denoising methods and achieves comparable performance to dataset-based unsupervised methods.

We introduce Free3D, a simple approach designed for open-set novel view synthesis (NVS) from a single image. Similar to Zero-1-to-3, we start from a pre-trained 2D image generator for generalization, and fine-tune it for NVS. Compared to recent and concurrent works, we obtain significant improvements without resorting to an explicit 3D representation, which is slow and memory-consuming or training an additional 3D network. We do so by encoding better the target camera pose via a new per-pixel ray conditioning normalization (RCN) layer. The latter injects pose information in the underlying 2D image generator by telling each pixel its specific viewing direction. We also improve multi-view consistency via a light-weight multi-view attention layer and multi-view noise sharing. We train Free3D on the Objaverse dataset and demonstrate excellent generalization to various new categories in several new datasets, including OminiObject3D and GSO. We hope our simple and effective approach will serve as a solid baseline and help future research in NVS with more accuracy pose. The project page is available at https://chuanxiaz.com/free3d/.

Unsupervised domain adaptation (UDA) for person re-identification is challenging because of the huge gap between the source and target domain. A typical self-training method is to use pseudo-labels generated by clustering algorithms to iteratively optimize the model on the target domain. However, a drawback to this is that noisy pseudo-labels generally cause trouble in learning. To address this problem, a mutual learning method by dual networks has been developed to produce reliable soft labels. However, as the two neural networks gradually converge, their complementarity is weakened and they likely become biased towards the same kind of noise. This paper proposes a novel light-weight module, the Attentive WaveBlock (AWB), which can be integrated into the dual networks of mutual learning to enhance the complementarity and further depress noise in the pseudo-labels. Specifically, we first introduce a parameter-free module, the WaveBlock, which creates a difference between features learned by two networks by waving blocks of feature maps differently. Then, an attention mechanism is leveraged to enlarge the difference created and discover more complementary features. Furthermore, two kinds of combination strategies, i.e. pre-attention and post-attention, are explored. Experiments demonstrate that the proposed method achieves state-of-the-art performance with significant improvements on multiple UDA person re-identification tasks. We also prove the generality of the proposed method by applying it to vehicle re-identification and image classification tasks. Our codes and models are available at https://github.com/WangWenhao0716/Attentive-WaveBlock.

Fast, scalable decoding architectures that operate in a block-wise parallel fashion across space and time are essential for real-time fault-tolerant quantum computing. We introduce a scalable AI-based pre-decoder for the surface code that performs local, parallel error correction with low decoding runtimes, removing the majority of physical errors before passing residual syndromes to a downstream global decoder. This modular architecture is backend-agnostic and composes with arbitrary global decoding algorithms designed for surface codes, and our implementation is completely open source. Integrated with uncorrelated PyMatching, the pipeline achieves end-to-end decoding runtimes of order O(1 μs) per round at large code distances on NVIDIA GB300 GPUs while reducing logical error rates (LERs) relative to global decoding alone. In a block-wise parallel decoding scheme with access to multiple GPUs, the decoding runtime can be reduced to well below O(1 μs) per round. We observe further LER improvements by training a larger model, outperforming correlated PyMatching up to distance-13. We additionally introduce a noise-learning architecture that infers decoding weights directly from experimentally accessible syndrome statistics without requiring an explicit circuit-level noise model. We show that purely data-driven graph weight estimation can nearly match uncorrelated PyMatching and exceed correlated PyMatching in certain regimes, enabling highly-optimized decoding when hardware noise models are unknown or time-varying, as well as training pre-decoders with realistic noise models. Together, these results establish a practical, modular, and high-throughput decoding framework suitable for large-distance surface-code implementations.

We introduce a new heuristic decoder, Relay-BP, targeting real-time quantum circuit decoding for large-scale quantum computers. Relay-BP achieves high accuracy across circuit-noise decoding problems: significantly outperforming BP+OSD+CS-10 for bivariate-bicycle codes and comparable to min-weight-matching for surface codes. As a lightweight message-passing decoder, Relay-BP is inherently parallel, enabling rapid low-footprint decoding with FPGA or ASIC real-time implementations, similar to standard BP. A core aspect of our decoder is its enhancement of the standard BP algorithm by incorporating disordered memory strengths. This dampens oscillations and breaks symmetries that trap traditional BP algorithms. By dynamically adjusting memory strengths in a relay approach, Relay-BP can consecutively encounter multiple valid corrections to improve decoding accuracy. We observe that a problem-dependent distribution of memory strengths that includes negative values is indispensable for good performance.

3D Gaussian Splatting (3DGS) has achieved impressive rendering performance in novel view synthesis. However, its efficacy diminishes considerably in sparse image sequences, where inherent data sparsity amplifies geometric uncertainty during optimization. This often leads to convergence at suboptimal local minima, resulting in noticeable structural artifacts in the reconstructed scenes.To mitigate these issues, we propose Uncertainty-aware Normal-Guided Gaussian Splatting (UNG-GS), a novel framework featuring an explicit Spatial Uncertainty Field (SUF) to quantify geometric uncertainty within the 3DGS pipeline. UNG-GS enables high-fidelity rendering and achieves high-precision reconstruction without relying on priors. Specifically, we first integrate Gaussian-based probabilistic modeling into the training of 3DGS to optimize the SUF, providing the model with adaptive error tolerance. An uncertainty-aware depth rendering strategy is then employed to weight depth contributions based on the SUF, effectively reducing noise while preserving fine details. Furthermore, an uncertainty-guided normal refinement method adjusts the influence of neighboring depth values in normal estimation, promoting robust results. Extensive experiments demonstrate that UNG-GS significantly outperforms state-of-the-art methods in both sparse and dense sequences. The code will be open-source.

This paper proposes FreeFuse, a novel training-free approach for multi-subject text-to-image generation through automatic fusion of multiple subject LoRAs. In contrast to existing methods that either focus on pre-inference LoRA weight merging or rely on segmentation models and complex techniques like noise blending to isolate LoRA outputs, our key insight is that context-aware dynamic subject masks can be automatically derived from cross-attention layer weights. Mathematical analysis shows that directly applying these masks to LoRA outputs during inference well approximates the case where the subject LoRA is integrated into the diffusion model and used individually for the masked region. FreeFuse demonstrates superior practicality and efficiency as it requires no additional training, no modification to LoRAs, no auxiliary models, and no user-defined prompt templates or region specifications. Alternatively, it only requires users to provide the LoRA activation words for seamless integration into standard workflows. Extensive experiments validate that FreeFuse outperforms existing approaches in both generation quality and usability under the multi-subject generation tasks. The project page is at https://future-item.github.io/FreeFuse/

Muon has recently shown promising results in LLM training. In this work, we study how to further improve Muon. We argue that Muon's orthogonalized update rule suppresses the emergence of heavy-tailed weight spectra and over-emphasizes the training along noise-dominated directions. Motivated by the Heavy-Tailed Self-Regularization (HT-SR) theory, we propose HTMuon. HTMuon preserves Muon's ability to capture parameter interdependencies while producing heavier-tailed updates and inducing heavier-tailed weight spectra. Experiments on LLM pretraining and image classification show that HTMuon consistently improves performance over state-of-the-art baselines and can also serve as a plug-in on top of existing Muon variants. For example, on LLaMA pretraining on the C4 dataset, HTMuon reduces perplexity by up to 0.98 compared to Muon. We further theoretically show that HTMuon corresponds to steepest descent under the Schatten-q norm constraint and provide convergence analysis in smooth non-convex settings. The implementation of HTMuon is available at https://github.com/TDCSZ327/HTmuon.

Diffusion transformers deliver strong image generation, but their training cost grows superlinearly with resolution. Recent work justifies training or sampling at reduced resolution on a spectral premise: at high noise, a downscaled latent preserves almost the full surviving signal. Whether a downscaled step also preserves the native training gradient signal, however, has remained unresolved. We reduce how that signal changes under downscaling to two terms: a noise-dependent term governed by the downscale ratio, which decays at high noise as the spectral premise predicts, and a σ-independent floor governed by the target grid's absolute token count, carried by the compute graph itself and removed by no noise level. The measured (route, σ) map corroborates the account and uncovers structure the spectral picture cannot express: on the 1024->768 route, a window (0.65 < σ< 0.95), predicted by no spectral criterion at any tolerance, where the downscaled gradient stays within a small margin of the native one. Training LoRA adapters with downscaled steps restricted to the routes and noise windows the map validates reduces training time by 14.6% at a fixed step budget while remaining near-native in weight space. Code is available at https://github.com/sorryhyun/anima_lora.

One might think that learning the identity function with a deep linear residual network is trivial - the path along residual connections already implements the identity, and so the network need only drive its weights to zero. However, this zero-weight solution is just one point on an entire manifold of population-loss minimizers, each corresponding to a different decomposition of the identity across the network's layers. Although the population loss does not distinguish among these solutions, stochastic gradient descent (SGD) reproducibly favors particular ones. For instance, under anisotropic label noise, the learned layers exhibit a noise-dependent spectrum; even with weight decay, SGD does not generally recover the zero-weight solution. Changing only the parametrization, while leaving the set of realizable functions unchanged, yields different behavior: factoring each weight matrix as a product of two matrices causes the weights to collapse to zero, even without explicit weight decay. While perhaps mysterious and unintuitive at first, these phenomena can be understood through the lens of entropic loss, which augments the population loss with a term proportional to the expected squared norm of the minibatch gradient (Ziyin et al., 2025). On the identity manifold, the population loss is constant, while the entropic term distinguishes among these decompositions. We characterize its minimizers analytically and use them to derive predictions for the structure of solutions favored by SGD. Networks trained with SGD closely match these predictions. Overall, the identity learning task studied here serves as a clean and simple case study of how the lens of entropic loss can clarify why SGD favors particular decompositions of the same input-output function.

Diffusion models may be viewed as hierarchical variational autoencoders (VAEs) with two improvements: parameter sharing for the conditional distributions in the generative process and efficient computation of the loss as independent terms over the hierarchy. We consider two changes to the diffusion model that retain these advantages while adding flexibility to the model. Firstly, we introduce a data- and depth-dependent mean function in the diffusion process, which leads to a modified diffusion loss. Our proposed framework, DiffEnc, achieves a statistically significant improvement in likelihood on CIFAR-10. Secondly, we let the ratio of the noise variance of the reverse encoder process and the generative process be a free weight parameter rather than being fixed to 1. This leads to theoretical insights: For a finite depth hierarchy, the evidence lower bound (ELBO) can be used as an objective for a weighted diffusion loss approach and for optimizing the noise schedule specifically for inference. For the infinite-depth hierarchy, on the other hand, the weight parameter has to be 1 to have a well-defined ELBO.

LLMs are commonly trained with a learning rate (LR) warmup, followed by cosine decay to 10% of the maximum (10x decay). In a large-scale empirical study, we show that under an optimal peak LR, a simple linear decay-to-zero (D2Z) schedule consistently outperforms other schedules when training at compute-optimal dataset sizes. D2Z is superior across a range of model sizes, batch sizes, datasets, and vocabularies. Benefits increase as dataset size increases. Leveraging a novel interpretation of AdamW as an exponential moving average of weight updates, we show how linear D2Z optimally balances the demands of early training (moving away from initial conditions) and late training (averaging over more updates in order to mitigate gradient noise). In experiments, a 610M-parameter model trained for 80 tokens-per-parameter (TPP) using D2Z achieves lower loss than when trained for 200 TPP using 10x decay, corresponding to an astonishing 60% compute savings. Models such as Llama2-7B, trained for 286 TPP with 10x decay, could likely have saved a majority of compute by training with D2Z.

This paper presents a lightweight text-to-speech (TTS) system developed for the WildSpoof Challenge TTS Track. Our approach fine-tunes the recently released open-weight TTS model, Supertonic\url{https://github.com/supertone-inc/supertonic}, with Self-Purifying Flow Matching (SPFM) to enable robust adaptation to in-the-wild speech. SPFM mitigates label noise by comparing conditional and unconditional flow matching losses on each sample, routing suspicious text--speech pairs to unconditional training while still leveraging their acoustic information. The resulting model achieves the lowest Word Error Rate (WER) among all participating teams, while ranking second in perceptual metrics such as UTMOS and DNSMOS. These findings demonstrate that efficient, open-weight architectures like Supertonic can be effectively adapted to diverse real-world speech conditions when combined with explicit noise-handling mechanisms such as SPFM.

Denoising diffusion models (DDMs) have led to staggering performance leaps in image generation, editing and restoration. However, existing DDMs use very large datasets for training. Here, we introduce a framework for training a DDM on a single image. Our method, which we coin SinDDM, learns the internal statistics of the training image by using a multi-scale diffusion process. To drive the reverse diffusion process, we use a fully-convolutional light-weight denoiser, which is conditioned on both the noise level and the scale. This architecture allows generating samples of arbitrary dimensions, in a coarse-to-fine manner. As we illustrate, SinDDM generates diverse high-quality samples, and is applicable in a wide array of tasks, including style transfer and harmonization. Furthermore, it can be easily guided by external supervision. Particularly, we demonstrate text-guided generation from a single image using a pre-trained CLIP model.

Deep neural networks often work well when they are over-parameterized and trained with a massive amount of noise and regularization, such as weight decay and dropout. Although dropout is widely used as a regularization technique for fully connected layers, it is often less effective for convolutional layers. This lack of success of dropout for convolutional layers is perhaps due to the fact that activation units in convolutional layers are spatially correlated so information can still flow through convolutional networks despite dropout. Thus a structured form of dropout is needed to regularize convolutional networks. In this paper, we introduce DropBlock, a form of structured dropout, where units in a contiguous region of a feature map are dropped together. We found that applying DropbBlock in skip connections in addition to the convolution layers increases the accuracy. Also, gradually increasing number of dropped units during training leads to better accuracy and more robust to hyperparameter choices. Extensive experiments show that DropBlock works better than dropout in regularizing convolutional networks. On ImageNet classification, ResNet-50 architecture with DropBlock achieves 78.13% accuracy, which is more than 1.6% improvement on the baseline. On COCO detection, DropBlock improves Average Precision of RetinaNet from 36.8% to 38.4%.

Continual Learning for Named Entity Recognition (CL-NER) aims to learn a growing number of entity types over time from a stream of data. However, simply learning Other-Class in the same way as new entity types amplifies the catastrophic forgetting and leads to a substantial performance drop. The main cause behind this is that Other-Class samples usually contain old entity types, and the old knowledge in these Other-Class samples is not preserved properly. Thanks to the causal inference, we identify that the forgetting is caused by the missing causal effect from the old data. To this end, we propose a unified causal framework to retrieve the causality from both new entity types and Other-Class. Furthermore, we apply curriculum learning to mitigate the impact of label noise and introduce a self-adaptive weight for balancing the causal effects between new entity types and Other-Class. Experimental results on three benchmark datasets show that our method outperforms the state-of-the-art method by a large margin. Moreover, our method can be combined with the existing state-of-the-art methods to improve the performance in CL-NER

Generative models, with their success in image and video generation, have recently been explored for synthesizing effective neural network weights. These approaches take trained neural network checkpoints as training data, and aim to generate high-performing neural network weights during inference. In this work, we examine four representative methods on their ability to generate novel model weights, i.e., weights that are different from the checkpoints seen during training. Surprisingly, we find that these methods synthesize weights largely by memorization: they produce either replicas, or at best simple interpolations, of the training checkpoints. Current methods fail to outperform simple baselines, such as adding noise to the weights or taking a simple weight ensemble, in obtaining different and simultaneously high-performing models. We further show that this memorization cannot be effectively mitigated by modifying modeling factors commonly associated with memorization in image diffusion models, or applying data augmentations. Our findings provide a realistic assessment of what types of data current generative models can model, and highlight the need for more careful evaluation of generative models in new domains. Our code is available at https://github.com/boyazeng/weight_memorization.

Multimodal question answering (QA) often requires identifying which video, audio, or sensor tokens are relevant to the question. Yet modality disagreements are common: off-camera speech, background noise, or motion outside the field of view often mislead fusion models that weight all streams equally. We present RAVEN, a unified QA architecture whose core is QuART, a query-conditioned cross-modal gating module that assigns scalar relevance scores to each token across modalities, enabling the model to amplify informative signals and suppress distractors before fusion. RAVEN is trained through a three-stage pipeline comprising unimodal pretraining, query-aligned fusion, and disagreement-oriented fine-tuning -- each stage targeting a distinct challenge in multi-modal reasoning: representation quality, cross-modal relevance, and robustness to modality mismatch. To support training and evaluation, we release AVS-QA, a dataset of 300K synchronized Audio--Video-Sensor streams paired with automatically generated question-answer pairs. Experimental results on seven multi-modal QA benchmarks -- including egocentric and exocentric tasks -- show that RAVEN achieves up to 14.5\% and 8.0\% gains in accuracy compared to state-of-the-art multi-modal large language models, respectively. Incorporating sensor data provides an additional 16.4\% boost, and the model remains robust under modality corruption, outperforming SOTA baselines by 50.23\%. Our code and dataset are available at https://github.com/BASHLab/RAVEN.

As hyperparameter tuning becomes increasingly costly at scale, efficient tuning methods are essential. Yet principles for guiding hyperparameter tuning remain limited. In this work, we seek to establish such principles by considering a broad range of hyperparameters, including batch size, learning rate, and weight decay. We identify a phenomenon we call trajectory invariance, where pre-training loss curves, gradient noise, and gradient norm exhibit invariance--closely overlapping--with respect to a quantity that combines learning rate and weight decay. This phenomenon effectively reduces the original two-dimensional hyperparameter space to one dimension, yielding an efficient tuning rule: follow the salient direction revealed by trajectory invariance. Furthermore, we refine previous scaling laws and challenge several existing viewpoints. Overall, our work proposes new principles for efficient tuning and inspires future research on scaling laws.

The Cosmic Microwave Background (CMB) radiation B mode polarization signal contains the unique signature of primordial metric perturbations produced during the inflation. The separation of the weak CMB B-mode signal from strong foreground contamination in observed maps is a complex task, and proposed new generation low noise satellite missions compete with the weak signal level of this gravitational background. In this article, for the first time, we employ a foreground model-independent internal linear combination (ILC) method to reconstruct the CMB B mode signal using simulated observations over large angular scales of the sky of 6 frequency bands of future generation CMB mission Probe of Inflation and Cosmic Origins (PICO). We estimate the joint CMB B mode posterior density following the interleaving Gibbs steps of B mode angular power spectrum and cleaned map samples using the ILC method. We extend and improve the earlier reported Bayesian ILC method to analyze weak CMB B mode reconstruction by introducing noise bias corrections at two stages during the ILC weight estimation. By performing 200 Monte Carlo simulations of the Bayesian ILC method, we find that our method can reconstruct the CMB signals and the joint posterior density accurately over large angular scales of the sky. We estimate Blackwell-Rao statistics of the marginal density of CMB B mode angular power spectrum and use them to estimate the joint density of scalar to tensor ratio r and a lensing power spectrum amplitude A^{lens}. Using 200 Monte Carlo simulations of the delensing approach, we find that our method can achieve an unbiased detection of the primordial gravitational wave signal r with more than 8σ significance for levels of r geqslant 0.01.

Large language model agents have shown strong potential in complex interactive tasks, yet their reinforcement learning (RL) is often hindered by sparse rewards, as a long multi-turn trajectory may receive only a single outcome-level signal. On-policy self-distillation (OPSD) provides dense token-level supervision from a privileged teacher, but the teacher may not be reliable at every position. Existing methods commonly rely on isolated token-level discrepancies, which can be sensitive to noise, or assign a shared step-level weight that may overlook positional variation. We propose Persistent Consistency Self-Distillation (PCSD), which derives token-level distillation weights from the local persistence of teacher-favoring signals. PCSD combines adaptive windows with exponentially decayed aggregation to capture persistent relative teacher support, applies trend-aware modulation to attenuate locally declining support, and produces continuous weights through sigmoid gating. The resulting objective is jointly optimized with GRPO, combining dense teacher guidance with sparse environmental feedback. Without inference-time skills, PCSD achieves the best ALFWorld Overall results among all baselines on both backbones, exceeding GRPO by 15.6 and 13.3 points and SDAR by 6.2 and 5.5 points, while remaining competitive on WebShop and gaining 15.8 points over GRPO on unseen ALFWorld split.

This paper investigates an increasingly important topic in generative modeling: pixel-space diffusion models. Although numerous studies have explored this topic, most focus on small-scale or class-conditional settings. Consequently, a practical recipe for training pixel-space models that rival or exceed well-established latent-space counterparts remains elusive. Through a comprehensive empirical study, we first observe that direct large-scale pre-training in pixel space converges substantially more slowly than in latent space. This observation motivates a latent-to-pixel strategy that acquires generative priors efficiently in latent space and transitions to pixel space during post-training. We then systematically investigate the key design choices governing this transition, including weight initialization, data composition, prediction target, decoder architecture, and noise schedule, and identify a practical recipe that makes the resulting pixel-space models match or outperform their latent-space counterparts while delivering 3.18 to 4.75 times end-to-end inference speedups. We hope that our findings provide useful empirical insights and practical guidelines for future research on pixel-space generation.

Standard human preference-based alignment methods, such as Reinforcement Learning from Human Feedback (RLHF), are a cornerstone technology for aligning Large Language Models (LLMs) with human values. However, these methods are all underpinned by a critical, yet flawed assumption: human preferences are homogeneous (representing a single, unified preference) and the collected data is noiseless (free from error). In reality, neither is true since human preference is pluralistic and annotators can make mistakes. This creates a discrepancy between the recorded data and the ground-truth preferences, which can misguide the model and degrade its performance. To address this challenge, we introduce Latent Collective Preference Optimization (LCPO). LCPO leverages an Expectation-Maximization (EM) algorithm to learn the latent collective consensus from noisy data. It operates by inferring the correctness of each preference label and using this probability as an adaptive weight to re-calibrate each data point's contribution to the training loss, thereby mitigating noise. We generalize this approach by establishing a theoretical link between arbitrary preference losses and their corresponding probabilistic models, elevating LCPO from a specific algorithm to a general framework for robust preference alignment. Theoretically, we prove that under the condition of a perfectly calibrated model, LCPO is guaranteed to converge to the true noise level of the dataset. Our experiments demonstrate LCPO's effectiveness as a general framework, consistently enhancing four state-of-the-art alignment algorithms (DPO, IPO, SimPO, and CPO). When applied to Mistral and Llama 3 models, the LCPO-enhanced methods achieve substantial win rate gains on AlpacaEval 2 and Arena-Hard, with improvements of up to 7.0% on both benchmarks.

Spiking Neural networks (SNN) have emerged as an attractive spatio-temporal computing paradigm for a wide range of low-power vision tasks. However, state-of-the-art (SOTA) SNN models either incur multiple time steps which hinder their deployment in real-time use cases or increase the training complexity significantly. To mitigate this concern, we present a training framework (from scratch) for one-time-step SNNs that uses a novel variant of the recently proposed Hoyer regularizer. We estimate the threshold of each SNN layer as the Hoyer extremum of a clipped version of its activation map, where the clipping threshold is trained using gradient descent with our Hoyer regularizer. This approach not only downscales the value of the trainable threshold, thereby emitting a large number of spikes for weight update with a limited number of iterations (due to only one time step) but also shifts the membrane potential values away from the threshold, thereby mitigating the effect of noise that can degrade the SNN accuracy. Our approach outperforms existing spiking, binary, and adder neural networks in terms of the accuracy-FLOPs trade-off for complex image recognition tasks. Downstream experiments on object detection also demonstrate the efficacy of our approach.

Inference-time multi-agent LLM scaling lacks a shared unit: counting nominal agents conflates cost with independent evidence. We derive a two-parameter scaling law R(N) = N_eff/N = 1/(1+c(N-1)N^{-β}) where the regime exponent β classifies any configuration into one of three asymptotic regimes -- hard-ceiling at 1/c (β= 0), sublinear at N^β/c (0 < β< 1), or linear (βge 1), and a mean-field theorem predicts that peer count k and rounds τ during agent debate enter the dynamics only through their product kτ. The law applies at two levels: answer diversity and correctness redundancy. Across 44 (model times task times condition) cells spanning peer debate, self-correction, random-noise placebo, self-consistency, three open-weight families (Qwen, Llama, Ministral) at scales from 7B to 32B with a frontier API check (Gemini), thinking models, heterogeneous teams, and sparse communication, the functional form fits every condition at R^2 > 0.99; only (c, β) shifts. On free-form math, dense peer influence collapses the answer-level regime from sublinear into hard-ceiling; correctness-level fits remain hard-ceiling throughout. Three findings have practical implications. (i)~Thirty dense debating agents produce no more answer diversity than one on MMLU-Hard. (ii)~A noise placebo tracks self-correction on free-form math and at 4times scale, so within homogeneous teams the gain commonly attributed to ``debate'' comes from re-evaluation, not peer content. (iii)~A single N le 5 pilot predicts the N=30 structural ceiling, and within the configurations tested only architectural diversity (heterogeneous teams) lowers c and escapes the hard-ceiling regime, communication-mode interventions do not.

Recent studies have shown that autoencoder-based models can achieve superior performance on anomaly detection tasks due to their excellent ability to fit complex data in an unsupervised manner. In this work, we propose a novel autoencoder-based model, named StackVAE-G that can significantly bring the efficiency and interpretability to multivariate time series anomaly detection. Specifically, we utilize the similarities across the time series channels by the stacking block-wise reconstruction with a weight-sharing scheme to reduce the size of learned models and also relieve the overfitting to unknown noises in the training data. We also leverage a graph learning module to learn a sparse adjacency matrix to explicitly capture the stable interrelation structure among multiple time series channels for the interpretable pattern reconstruction of interrelated channels. Combining these two modules, we introduce the stacking block-wise VAE (variational autoencoder) with GNN (graph neural network) model for multivariate time series anomaly detection. We conduct extensive experiments on three commonly used public datasets, showing that our model achieves comparable (even better) performance with the state-of-the-art modelsand meanwhile requires much less computation and memory cost. Furthermore, we demonstrate that the adjacency matrix learned by our model accurately captures the interrelation among multiple channels, and can provide valuable information for failure diagnosis applications.

Segmenting or detecting objects in sparse Lidar point clouds are two important tasks in autonomous driving to allow a vehicle to act safely in its 3D environment. The best performing methods in 3D semantic segmentation or object detection rely on a large amount of annotated data. Yet annotating 3D Lidar data for these tasks is tedious and costly. In this context, we propose a self-supervised pre-training method for 3D perception models that is tailored to autonomous driving data. Specifically, we leverage the availability of synchronized and calibrated image and Lidar sensors in autonomous driving setups for distilling self-supervised pre-trained image representations into 3D models. Hence, our method does not require any point cloud nor image annotations. The key ingredient of our method is the use of superpixels which are used to pool 3D point features and 2D pixel features in visually similar regions. We then train a 3D network on the self-supervised task of matching these pooled point features with the corresponding pooled image pixel features. The advantages of contrasting regions obtained by superpixels are that: (1) grouping together pixels and points of visually coherent regions leads to a more meaningful contrastive task that produces features well adapted to 3D semantic segmentation and 3D object detection; (2) all the different regions have the same weight in the contrastive loss regardless of the number of 3D points sampled in these regions; (3) it mitigates the noise produced by incorrect matching of points and pixels due to occlusions between the different sensors. Extensive experiments on autonomous driving datasets demonstrate the ability of our image-to-Lidar distillation strategy to produce 3D representations that transfer well on semantic segmentation and object detection tasks.

Model families train every size from scratch. Can a pretrained large model be converted into a smaller sibling? We characterize the 1.4B->410M conversion in the Pythia family end-to-end: (i) representations align strongly across sizes (ridge R^2=0.84) while parameters align weakly; (ii) dense weight projection is functionally destructive -- provably not an assembly artifact -- because basis mixing breaks rotary, per-head, GELU, and LayerNorm structure; (iii) after the best-fit linear operator, weight residuals are statistically indistinguishable from noise under shuffle controls; (iv) conversion value therefore lives in initialization. In matched-budget continued pre-training we decompose conversion into two independent levers -- least-squares compensation (function: best zero-shot) and variance-preserving rescale (dynamics: best endpoints). Compensation is a token-efficient, low-budget win rather than a universal one: at 30M tokens it beats the strongest subcloning variant on both a width-reduced pair (84.0 +/- 1.8 vs. 89.7 +/- 3.7, 3/3 seeds) and a held-out depth-reduced pair (109.3 vs. 117.9, 3/3 seeds), reaching a given quality with fewer tokens; at a 33x larger budget the two converge to parity (40.0 vs. 40.0), both far ahead of from-scratch, which transfer initialization always beats -- by up to 18x at low budget, the margin narrowing at convergence and at the largest scale. We further map the method's boundary: at ~5x the donor scale (6.9B->1.4B) stacking both levers over-corrects, which we trace to ill-conditioning of the compensation solve at large width, pointing to dimension-aware regularization as the fix. Code, checkpoints, and the frozen evaluation corpus are released.

On-policy distillation (OPD) trains a student to match the teacher's next-token distributions on the student's own trajectories and has yielded substantial empirical gains. Generalized variants allow the student to surpass the teacher by extrapolating an implicit reward in output space. The language-model head, however, attenuates this change anisotropically: much of the change encoded in the teacher's hidden states reaches the logits at a small fraction of its weight, and the sampled-token log-probability ratios on which output-space extrapolation relies inject noise that the extrapolation amplifies, making training unstable. We observe that reinforcement learning (RL) shifts a model's internal representations relative to its base checkpoint, and that the direction of this shift can be measured at every layer. Motivated by this observation, we propose RIDE (RL-Induced Direction Extrapolation), which extrapolates the RL-induced change directly in representation space: at every layer and token position, RIDE computes the residual between the teacher and its pre-RL checkpoint and regresses the student's hidden states toward targets displaced beyond the teacher along this residual. Conditioned on a sampled trajectory, this regression is equivalent to maximizing a linear directional reward defined by the residual under a quadratic penalty centered at the teacher, which makes explicit how the objective moves the student along the RL-induced direction while limiting its deviation from the teacher. Across four base/RL-teacher pairs spanning different scales, architectures, and pre-training lineages, RIDE approaches or exceeds the RL-trained teacher on every pair and is the only method whose mean does so, and it consistently outperforms output-space extrapolation, which degrades the student whenever the teacher is close to its base. Project page: https://github.com/xixixixixxxx/RIDE.

Understanding when the noise in stochastic gradient descent (SGD) affects generalization of deep neural networks remains a challenge, complicated by the fact that networks can operate in distinct training regimes. Here we study how the magnitude of this noise T affects performance as the size of the training set P and the scale of initialization alpha are varied. For gradient descent, alpha is a key parameter that controls if the network is `lazy'(alphagg1) or instead learns features (alphall1). For classification of MNIST and CIFAR10 images, our central results are: (i) obtaining phase diagrams for performance in the (alpha,T) plane. They show that SGD noise can be detrimental or instead useful depending on the training regime. Moreover, although increasing T or decreasing alpha both allow the net to escape the lazy regime, these changes can have opposite effects on performance. (ii) Most importantly, we find that the characteristic temperature T_c where the noise of SGD starts affecting the trained model (and eventually performance) is a power law of P. We relate this finding with the observation that key dynamical quantities, such as the total variation of weights during training, depend on both T and P as power laws. These results indicate that a key effect of SGD noise occurs late in training by affecting the stopping process whereby all data are fitted. Indeed, we argue that due to SGD noise, nets must develop a stronger `signal', i.e. larger informative weights, to fit the data, leading to a longer training time. A stronger signal and a longer training time are also required when the size of the training set P increases. We confirm these views in the perceptron model, where signal and noise can be precisely measured. Interestingly, exponents characterizing the effect of SGD depend on the density of data near the decision boundary, as we explain.

Weight oscillation is an undesirable side effect of quantization-aware training, in which quantized weights frequently jump between two quantized levels, resulting in training instability and a sub-optimal final model. We discover that the learnable scaling factor, a widely-used de facto setting in quantization aggravates weight oscillation. In this study, we investigate the connection between the learnable scaling factor and quantized weight oscillation and use ViT as a case driver to illustrate the findings and remedies. In addition, we also found that the interdependence between quantized weights in query and key of a self-attention layer makes ViT vulnerable to oscillation. We, therefore, propose three techniques accordingly: statistical weight quantization (rm StatsQ) to improve quantization robustness compared to the prevalent learnable-scale-based method; confidence-guided annealing (rm CGA) that freezes the weights with high confidence and calms the oscillating weights; and query-key reparameterization (rm QKR) to resolve the query-key intertwined oscillation and mitigate the resulting gradient misestimation. Extensive experiments demonstrate that these proposed techniques successfully abate weight oscillation and consistently achieve substantial accuracy improvement on ImageNet. Specifically, our 2-bit DeiT-T/DeiT-S algorithms outperform the previous state-of-the-art by 9.8% and 7.7%, respectively. Code and models are available at: https://github.com/nbasyl/OFQ.

Modeling and synthesizing low-light raw noise is a fundamental problem for computational photography and image processing applications. Although most recent works have adopted physics-based models to synthesize noise, the signal-independent noise in low-light conditions is far more complicated and varies dramatically across camera sensors, which is beyond the description of these models. To address this issue, we introduce a new perspective to synthesize the signal-independent noise by a generative model. Specifically, we synthesize the signal-dependent and signal-independent noise in a physics- and learning-based manner, respectively. In this way, our method can be considered as a general model, that is, it can simultaneously learn different noise characteristics for different ISO levels and generalize to various sensors. Subsequently, we present an effective multi-scale discriminator termed Fourier transformer discriminator (FTD) to distinguish the noise distribution accurately. Additionally, we collect a new low-light raw denoising (LRD) dataset for training and benchmarking. Qualitative validation shows that the noise generated by our proposed noise model can be highly similar to the real noise in terms of distribution. Furthermore, extensive denoising experiments demonstrate that our method performs favorably against state-of-the-art methods on different sensors.

During both pretraining and fine-tuning, Large Language Models (LLMs) are trained on trillions of tokens of text of widely varying quality. Both phases of training typically involve heuristically filtering out ``low-quality'' or noisy training samples, yet little is known quantitatively about how the type or intensity of noise affects downstream performance. In this work, we study how noise in chain of thought (CoT) impacts task performance in the highly-controlled setting of algorithmically solvable tasks. First, we develop the Traced Integer (TInt) framework to generate highly customizable noised execution traces for any arithmetic function on lists of integers. We then define two types of noise: static noise, a local form of noise which is applied after the CoT trace is computed, and dynamic noise, a global form of noise which propagates errors in the trace as it is computed. We then evaluate the test performance of pretrained models both prompted and fine-tuned on noised datasets with varying levels of dataset contamination and intensity. We find fine-tuned models are extremely robust to high levels of static noise but struggle significantly more with lower levels of dynamic noise. In contrast, few-shot prompted models appear more sensitive to even static noise. We conclude with a discussion of how our findings impact noise filtering best-practices, in particular emphasizing the importance of removing samples containing destructive dynamic noise with global errors.

The ecological validity of soundscape studies usually rests on a choice of soundscapes that are representative of the perceptual space under investigation. For example, a soundscape pleasantness study might investigate locations with soundscapes ranging from "pleasant" to "annoying". The choice of soundscapes is typically researcher-led, but a participant-led process can reduce selection bias and improve result reliability. Hence, we propose a robust participant-led method to pinpoint characteristic soundscapes possessing arbitrary perceptual attributes. We validate our method by identifying Singaporean soundscapes spanning the perceptual quadrants generated from the "Pleasantness" and "Eventfulness" axes of the ISO 12913-2 circumplex model of soundscape perception, as perceived by local experts. From memory and experience, 67 participants first selected locations corresponding to each perceptual quadrant in each major planning region of Singapore. We then performed weighted k-means clustering on the selected locations, with weights for each location derived from previous frequencies and durations spent in each location by each participant. Weights hence acted as proxies for participant confidence. In total, 62 locations were thereby identified as suitable locations with characteristic soundscapes for further research utilizing the ISO 12913-2 perceptual quadrants. Audio-visual recordings and acoustic characterization of the soundscapes will be made in a future study.

Distant and weak supervision allow to obtain large amounts of labeled training data quickly and cheaply, but these automatic annotations tend to contain a high amount of errors. A popular technique to overcome the negative effects of these noisy labels is noise modelling where the underlying noise process is modelled. In this work, we study the quality of these estimated noise models from the theoretical side by deriving the expected error of the noise model. Apart from evaluating the theoretical results on commonly used synthetic noise, we also publish NoisyNER, a new noisy label dataset from the NLP domain that was obtained through a realistic distant supervision technique. It provides seven sets of labels with differing noise patterns to evaluate different noise levels on the same instances. Parallel, clean labels are available making it possible to study scenarios where a small amount of gold-standard data can be leveraged. Our theoretical results and the corresponding experiments give insights into the factors that influence the noise model estimation like the noise distribution and the sampling technique.

Federated Learning (FL) is a distributed machine learning paradigm where clients collaboratively train a model using their local (human-generated) datasets. While existing studies focus on FL algorithm development to tackle data heterogeneity across clients, the important issue of data quality (e.g., label noise) in FL is overlooked. This paper aims to fill this gap by providing a quantitative study on the impact of label noise on FL. We derive an upper bound for the generalization error that is linear in the clients' label noise level. Then we conduct experiments on MNIST and CIFAR-10 datasets using various FL algorithms. Our empirical results show that the global model accuracy linearly decreases as the noise level increases, which is consistent with our theoretical analysis. We further find that label noise slows down the convergence of FL training, and the global model tends to overfit when the noise level is high.

Available training data for named entity recognition (NER) often contains a significant percentage of incorrect labels for entity types and entity boundaries. Such label noise poses challenges for supervised learning and may significantly deteriorate model quality. To address this, prior work proposed various noise-robust learning approaches capable of learning from data with partially incorrect labels. These approaches are typically evaluated using simulated noise where the labels in a clean dataset are automatically corrupted. However, as we show in this paper, this leads to unrealistic noise that is far easier to handle than real noise caused by human error or semi-automatic annotation. To enable the study of the impact of various types of real noise, we introduce NoiseBench, an NER benchmark consisting of clean training data corrupted with 6 types of real noise, including expert errors, crowdsourcing errors, automatic annotation errors and LLM errors. We present an analysis that shows that real noise is significantly more challenging than simulated noise, and show that current state-of-the-art models for noise-robust learning fall far short of their theoretically achievable upper bound. We release NoiseBench to the research community.

Label noise is one of the key factors that lead to the poor generalization of deep learning models. Existing label-noise learning methods usually assume that the ground-truth classes of the training data are balanced. However, the real-world data is often imbalanced, leading to the inconsistency between observed and intrinsic class distribution with label noises. In this case, it is hard to distinguish clean samples from noisy samples on the intrinsic tail classes with the unknown intrinsic class distribution. In this paper, we propose a learning framework for label-noise learning with intrinsically long-tailed data. Specifically, we propose two-stage bi-dimensional sample selection (TABASCO) to better separate clean samples from noisy samples, especially for the tail classes. TABASCO consists of two new separation metrics that complement each other to compensate for the limitation of using a single metric in sample separation. Extensive experiments on benchmarks demonstrate the effectiveness of our method. Our code is available at https://github.com/Wakings/TABASCO.

We present the Noisy Ostracods, a noisy dataset for genus and species classification of crustacean ostracods with specialists' annotations. Over the 71466 specimens collected, 5.58% of them are estimated to be noisy (possibly problematic) at genus level. The dataset is created to addressing a real-world challenge: creating a clean fine-grained taxonomy dataset. The Noisy Ostracods dataset has diverse noises from multiple sources. Firstly, the noise is open-set, including new classes discovered during curation that were not part of the original annotation. The dataset has pseudo-classes, where annotators misclassified samples that should belong to an existing class into a new pseudo-class. The Noisy Ostracods dataset is highly imbalanced with a imbalance factor ρ = 22429. This presents a unique challenge for robust machine learning methods, as existing approaches have not been extensively evaluated on fine-grained classification tasks with such diverse real-world noise. Initial experiments using current robust learning techniques have not yielded significant performance improvements on the Noisy Ostracods dataset compared to cross-entropy training on the raw, noisy data. On the other hand, noise detection methods have underperformed in error hit rate compared to naive cross-validation ensembling for identifying problematic labels. These findings suggest that the fine-grained, imbalanced nature, and complex noise characteristics of the dataset present considerable challenges for existing noise-robust algorithms. By openly releasing the Noisy Ostracods dataset, our goal is to encourage further research into the development of noise-resilient machine learning methods capable of effectively handling diverse, real-world noise in fine-grained classification tasks. The dataset, along with its evaluation protocols, can be accessed at https://github.com/H-Jamieu/Noisy_ostracods.

Federated learning (FL) leverages client-server communications to train global models on decentralized data. However, communication noise or errors can impair model accuracy. To address this problem, we propose a novel FL algorithm that enhances robustness against communication noise while also reducing communication load. We derive the proposed algorithm through solving the weighted least-squares (WLS) regression problem as an illustrative example. We first frame WLS regression as a distributed convex optimization problem over a federated network employing random scheduling for improved communication efficiency. We then apply the alternating direction method of multipliers (ADMM) to iteratively solve this problem. To counteract the detrimental effects of cumulative communication noise, we introduce a key modification by eliminating the dual variable and implementing a new local model update at each participating client. This subtle yet effective change results in using a single noisy global model update at each client instead of two, improving robustness against additive communication noise. Furthermore, we incorporate another modification enabling clients to continue local updates even when not selected by the server, leading to substantial performance improvements. Our theoretical analysis confirms the convergence of our algorithm in both mean and the mean-square senses, even when the server communicates with a random subset of clients over noisy links at each iteration. Numerical results validate the effectiveness of our proposed algorithm and corroborate our theoretical findings.

Multiplicative noise, also known as speckle or pepper noise, commonly affects images produced by synthetic aperture radar (SAR), lasers, or optical lenses. Unlike additive noise, which typically arises from thermal processes or external factors, multiplicative noise is inherent to the system, originating from the fluctuation in diffuse reflections. These fluctuations result in multiple copies of the same signal with varying magnitudes being combined. Consequently, despeckling, or removing multiplicative noise, necessitates different techniques compared to those used for additive noise removal. In this paper, we propose a novel approach using Stochastic Differential Equations based diffusion models to address multiplicative noise. We demonstrate that multiplicative noise can be effectively modeled as a Geometric Brownian Motion process in the logarithmic domain. Utilizing the Fokker-Planck equation, we derive the corresponding reverse process for image denoising. To validate our method, we conduct extensive experiments on two different datasets, comparing our approach to both classical signal processing techniques and contemporary CNN-based noise removal models. Our results indicate that the proposed method significantly outperforms existing methods on perception-based metrics such as FID and LPIPS, while maintaining competitive performance on traditional metrics like PSNR and SSIM.

Changes in body perception influence behavior and emotion and can be induced through multisensory feedback. Auditory feedback to one's actions can trigger such alterations; however, it is unclear which individual factors modulate these effects. We employ and evaluate SoniWeight Shoes, a wearable device based on literature for altering one's weight perception through manipulated footstep sounds. In a healthy population sample across a spectrum of individuals (n=84) with varying degrees of eating disorder symptomatology, physical activity levels, body concerns, and mental imagery capacities, we explore the effects of three sound conditions (low-frequency, high-frequency and control) on extensive body perception measures (demographic, behavioral, physiological, psychological, and subjective). Analyses revealed an impact of individual differences in each of these dimensions. Besides replicating previous findings, we reveal and highlight the role of individual differences in body perception, offering avenues for personalized sonification strategies. Datasets, technical refinements, and novel body map quantification tools are provided.

Label noise is prevalent in machine learning datasets. It is crucial to identify and remove label noise because models trained on noisy data can have substantially reduced accuracy and generalizability. Most existing label noise detection approaches are designed for classification tasks, and data cleaning for outcome prediction analysis is relatively unexplored. Inspired by the fluctuations in performance across different folds in cross-validation, we propose Repeated Cross-Validations for label noise estimation (ReCoV) to address this gap. ReCoV constructs a noise histogram that ranks the noise level of samples based on a large number of cross-validations by recording sample IDs in each worst-performing fold. We further propose three approaches for identifying noisy samples based on noise histograms to address increasingly complex noise distributions. We show that ReCoV outperforms state-of-the-art algorithms for label cleaning in a classification task benchmark. More importantly, we show that removing ReCoV-identified noisy samples in two medical imaging outcome prediction datasets significantly improves model performance on test sets. As a statistical approach that does not rely on hyperparameters, noise distributions, or model structures, ReCoV is compatible with any machine learning analysis.

Event cameras, also known as dynamic vision sensors, are an emerging modality for measuring fast dynamics asynchronously. Event cameras capture changes of log-intensity over time as a stream of 'events' and generally cannot measure intensity itself; hence, they are only used for imaging dynamic scenes. However, fluctuations due to random photon arrival inevitably trigger noise events, even for static scenes. While previous efforts have been focused on filtering out these undesirable noise events to improve signal quality, we find that, in the photon-noise regime, these noise events are correlated with the static scene intensity. We analyze the noise event generation and model its relationship to illuminance. Based on this understanding, we propose a method, called Noise2Image, to leverage the illuminance-dependent noise characteristics to recover the static parts of a scene, which are otherwise invisible to event cameras. We experimentally collect a dataset of noise events on static scenes to train and validate Noise2Image. Our results provide a novel approach for capturing static scenes in event cameras, solely from noise events, without additional hardware.

Text-to-image diffusion model is a popular paradigm that synthesizes personalized images by providing a text prompt and a random Gaussian noise. While people observe that some noises are ``golden noises'' that can achieve better text-image alignment and higher human preference than others, we still lack a machine learning framework to obtain those golden noises. To learn golden noises for diffusion sampling, we mainly make three contributions in this paper. First, we identify a new concept termed the noise prompt, which aims at turning a random Gaussian noise into a golden noise by adding a small desirable perturbation derived from the text prompt. Following the concept, we first formulate the noise prompt learning framework that systematically learns ``prompted'' golden noise associated with a text prompt for diffusion models. Second, we design a noise prompt data collection pipeline and collect a large-scale noise prompt dataset~(NPD) that contains 100k pairs of random noises and golden noises with the associated text prompts. With the prepared NPD as the training dataset, we trained a small noise prompt network~(NPNet) that can directly learn to transform a random noise into a golden noise. The learned golden noise perturbation can be considered as a kind of prompt for noise, as it is rich in semantic information and tailored to the given text prompt. Third, our extensive experiments demonstrate the impressive effectiveness and generalization of NPNet on improving the quality of synthesized images across various diffusion models, including SDXL, DreamShaper-xl-v2-turbo, and Hunyuan-DiT. Moreover, NPNet is a small and efficient controller that acts as a plug-and-play module with very limited additional inference and computational costs, as it just provides a golden noise instead of a random noise without accessing the original pipeline.

Speech enhancement (SE) aims to extract the clean waveform from noise-contaminated measurements to improve the speech quality and intelligibility. Although learning-based methods can perform much better than traditional counterparts, the large computational complexity and model size heavily limit the deployment on latency-sensitive and low-resource edge devices. In this work, we propose a lightweight SE network (LiSenNet) for real-time applications. We design sub-band downsampling and upsampling blocks and a dual-path recurrent module to capture band-aware features and time-frequency patterns, respectively. A noise detector is developed to detect noisy regions in order to perform SE adaptively and save computational costs. Compared to recent higher-resource-dependent baseline models, the proposed LiSenNet can achieve a competitive performance with only 37k parameters (half of the state-of-the-art model) and 56M multiply-accumulate (MAC) operations per second.

Membership Inference Attacks (MIAs) expose privacy risks by determining whether a specific sample was part of a model's training set. These threats are especially serious in sensitive domains such as healthcare and finance. Traditional mitigation techniques, such as static differential privacy, rely on injecting a fixed amount of noise during training or inference. However, this often leads to a detrimental trade-off: the noise may be insufficient to counter sophisticated attacks or, when increased, can substantially degrade model accuracy. To address this limitation, we propose DynaNoise, an adaptive inference-time defense that modulates injected noise based on per-query sensitivity. DynaNoise estimates risk using measures such as Shannon entropy and scales the noise variance accordingly, followed by a smoothing step that re-normalizes the perturbed outputs to preserve predictive utility. We further introduce MIDPUT (Membership Inference Defense Privacy-Utility Trade-off), a scalar metric that captures both privacy gains and accuracy retention. Our evaluation on several benchmark datasets demonstrates that DynaNoise substantially lowers attack success rates while maintaining competitive accuracy, achieving strong overall MIDPUT scores compared to state-of-the-art defenses.

Large language models (LLMs) are typically pretrained in high precision but increasingly deployed with low-precision post-training quantization (PTQ). Recent studies have shown that using weight averaging during pretraining can improve PTQ performance compared with learning-rate decay, suggesting that it might provide a simple way to improve the pretraining-to-quantization transition. But the mechanism behind weight averaging remains insufficiently explained. This leads to inconsistent and fragile performance gains, thereby preventing practitioners from applying such a technique confidently. As a response, we formulate weight averaging as a trade-off between retaining training progress and improving robustness under perturbation. We further derive a continuous family of averaging kernels that unifies conventional strategies and achieves the Pareto frontier between the two competing goals. Critically, a theoretical framework for performing weight averaging under PTQ is developed. It can be shown that coarser quantization is more susceptible to perturbations, whereas finer quantization could be less affected. Thus, our results could provide unified theoretical guidance for performing weight averaging under different PTQ conditions. Experiments validate both the predicted behavior and the proposed averaging strategy. Code is available at https://github.com/MOFA-LAB/weight-averaging-for-ptq.

Although current fake audio detection approaches have achieved remarkable success on specific datasets, they often fail when evaluated with datasets from different distributions. Previous studies typically address distribution shift by focusing on using extra data or applying extra loss restrictions during training. However, these methods either require a substantial amount of data or complicate the training process. In this work, we propose a stable learning-based training scheme that involves a Sample Weight Learning (SWL) module, addressing distribution shift by decorrelating all selected features via learning weights from training samples. The proposed portable plug-in-like SWL is easy to apply to multiple base models and generalizes them without using extra data during training. Experiments conducted on the ASVspoof datasets clearly demonstrate the effectiveness of SWL in generalizing different models across three evaluation datasets from different distributions.

Retrieval-Augmented Generation (RAG) has emerged as a crucial method for addressing hallucinations in large language models (LLMs). While recent research has extended RAG models to complex noisy scenarios, these explorations often confine themselves to limited noise types and presuppose that noise is inherently detrimental to LLMs, potentially deviating from real-world retrieval environments and restricting practical applicability. In this paper, we define seven distinct noise types from a linguistic perspective and establish a Noise RAG Benchmark (NoiserBench), a comprehensive evaluation framework encompassing multiple datasets and reasoning tasks. Through empirical evaluation of eight representative LLMs with diverse architectures and scales, we reveal that these noises can be further categorized into two practical groups: noise that is beneficial to LLMs (aka beneficial noise) and noise that is harmful to LLMs (aka harmful noise). While harmful noise generally impairs performance, beneficial noise may enhance several aspects of model capabilities and overall performance. Our analysis offers insights for developing more robust, adaptable RAG solutions and mitigating hallucinations across diverse retrieval scenarios.

Diffusion-based image super-resolution methods have demonstrated significant advantages over GAN-based approaches, particularly in terms of perceptual quality. Building upon a lengthy Markov chain, diffusion-based methods possess remarkable modeling capacity, enabling them to achieve outstanding performance in real-world scenarios. Unlike previous methods that focus on modifying the noise schedule or sampling process to enhance performance, our approach emphasizes the improved utilization of LR information. We find that different regions of the LR image can be viewed as corresponding to different timesteps in a diffusion process, where flat areas are closer to the target HR distribution but edge and texture regions are farther away. In these flat areas, applying a slight noise is more advantageous for the reconstruction. We associate this characteristic with uncertainty and propose to apply uncertainty estimate to guide region-specific noise level control, a technique we refer to as Uncertainty-guided Noise Weighting. Pixels with lower uncertainty (i.e., flat regions) receive reduced noise to preserve more LR information, therefore improving performance. Furthermore, we modify the network architecture of previous methods to develop our Uncertainty-guided Perturbation Super-Resolution (UPSR) model. Extensive experimental results demonstrate that, despite reduced model size and training overhead, the proposed UWSR method outperforms current state-of-the-art methods across various datasets, both quantitatively and qualitatively.

We study the class of location-scale or heteroscedastic noise models (LSNMs), in which the effect Y can be written as a function of the cause X and a noise source N independent of X, which may be scaled by a positive function g over the cause, i.e., Y = f(X) + g(X)N. Despite the generality of the model class, we show the causal direction is identifiable up to some pathological cases. To empirically validate these theoretical findings, we propose two estimators for LSNMs: an estimator based on (non-linear) feature maps, and one based on neural networks. Both model the conditional distribution of Y given X as a Gaussian parameterized by its natural parameters. When the feature maps are correctly specified, we prove that our estimator is jointly concave, and a consistent estimator for the cause-effect identification task. Although the the neural network does not inherit those guarantees, it can fit functions of arbitrary complexity, and reaches state-of-the-art performance across benchmarks.

Recently, the mainstream practice for training low-light raw image denoising methods has shifted towards employing synthetic data. Noise modeling, which focuses on characterizing the noise distribution of real-world sensors, profoundly influences the effectiveness and practicality of synthetic data. Currently, physics-based noise modeling struggles to characterize the entire real noise distribution, while learning-based noise modeling impractically depends on paired real data. In this paper, we propose a novel strategy: learning the noise model from dark frames instead of paired real data, to break down the data dependency. Based on this strategy, we introduce an efficient physics-guided noise neural proxy (PNNP) to approximate the real-world sensor noise model. Specifically, we integrate physical priors into neural proxies and introduce three efficient techniques: physics-guided noise decoupling (PND), physics-guided proxy model (PPM), and differentiable distribution loss (DDL). PND decouples the dark frame into different components and handles different levels of noise flexibly, which reduces the complexity of noise modeling. PPM incorporates physical priors to constrain the generated noise, which promotes the accuracy of noise modeling. DDL provides explicit and reliable supervision for noise distribution, which promotes the precision of noise modeling. PNNP exhibits powerful potential in characterizing the real noise distribution. Extensive experiments on public datasets demonstrate superior performance in practical low-light raw image denoising. The code will be available at https://github.com/fenghansen/PNNP.

In mechanical structures like airplanes, cars and houses, noise is generated and transmitted through vibrations. To take measures to reduce this noise, vibrations need to be simulated with expensive numerical computations. Deep learning surrogate models present a promising alternative to classical numerical simulations as they can be evaluated magnitudes faster, while trading-off accuracy. To quantify such trade-offs systematically and foster the development of methods, we present a benchmark on the task of predicting the vibration of harmonically excited plates. The benchmark features a total of 12,000 plate geometries with varying forms of beadings, material, boundary conditions, load position and sizes with associated numerical solutions. To address the benchmark task, we propose a new network architecture, named Frequency-Query Operator, which predicts vibration patterns of plate geometries given a specific excitation frequency. Applying principles from operator learning and implicit models for shape encoding, our approach effectively addresses the prediction of highly variable frequency response functions occurring in dynamic systems. To quantify the prediction quality, we introduce a set of evaluation metrics and evaluate the method on our vibrating-plates benchmark. Our method outperforms DeepONets, Fourier Neural Operators and more traditional neural network architectures and can be used for design optimization. Code, dataset and visualizations: https://github.com/ecker-lab/Learning_Vibrating_Plates

Diffusion models have demonstrated compelling generation quality by optimizing the variational lower bound through a simple denoising score matching loss. In this paper, we provide theoretical evidence that the prevailing practice of using a constant loss weight strategy in diffusion models leads to biased estimation during the training phase. Simply optimizing the denoising network to predict Gaussian noise with constant weighting may hinder precise estimations of original images. To address the issue, we propose an elegant and effective weighting strategy grounded in the theoretically unbiased principle. Moreover, we conduct a comprehensive and systematic exploration to dissect the inherent bias problem deriving from constant weighting loss from the perspectives of its existence, impact and reasons. These analyses are expected to advance our understanding and demystify the inner workings of diffusion models. Through empirical evaluation, we demonstrate that our proposed debiased estimation method significantly enhances sample quality without the reliance on complex techniques, and exhibits improved efficiency compared to the baseline method both in training and sampling processes.

An increasing number of studies have focused on stochastic first-order methods (SFOMs) under heavy-tailed gradient noises, which have been observed in the training of practical deep learning models. In this paper, we focus on two types of gradient noises: one is sub-Weibull noise, and the other is noise under the assumption that it has a bounded p-th central moment (p-BCM) with pin (1, 2]. The latter is more challenging due to the occurrence of infinite variance when pin (1, 2). Under these two gradient noise assumptions, the in-expectation and high-probability convergence of SFOMs have been extensively studied in the contexts of convex optimization and standard smooth optimization. However, for weakly convex objectives-a class that includes all Lipschitz-continuous convex objectives and smooth objectives-our understanding of the in-expectation and high-probability convergence of SFOMs under these two types of noises remains incomplete. We investigate the high-probability convergence of the vanilla stochastic subgradient descent (SsGD) method under sub-Weibull noises, as well as the high-probability and in-expectation convergence of clipped SsGD under the p-BCM noises. Both analyses are conducted in the context of weakly convex optimization. For weakly convex objectives that may be non-convex and non-smooth, our results demonstrate that the theoretical dependence of vanilla SsGD on the failure probability and number of iterations under sub-Weibull noises does not degrade compared to the case of smooth objectives. Under p-BCM noises, our findings indicate that the non-smoothness and non-convexity of weakly convex objectives do not impact the theoretical dependence of clipped SGD on the failure probability relative to the smooth case; however, the sample complexity we derived is worse than a well-known lower bound for smooth optimization.

Text-to-image diffusion models trained on a fixed set of resolutions often fail to generalize, even when asked to generate images at lower resolutions than those seen during training. High-resolution text-to-image generators are currently unable to easily offer an out-of-the-box budget-efficient alternative to their users who might not need high-resolution images. We identify a key technical insight in diffusion models that when addressed can help tackle this limitation: Noise schedulers have unequal perceptual effects across resolutions. The same level of noise removes disproportionately more signal from lower-resolution images than from high-resolution images, leading to a train-test mismatch. We propose NoiseShift, a training-free method that recalibrates the noise level of the denoiser conditioned on resolution size. NoiseShift requires no changes to model architecture or sampling schedule and is compatible with existing models. When applied to Stable Diffusion 3, Stable Diffusion 3.5, and Flux-Dev, quality at low resolutions is significantly improved. On LAION-COCO, NoiseShift improves SD3.5 by 15.89%, SD3 by 8.56%, and Flux-Dev by 2.44% in FID on average. On CelebA, NoiseShift improves SD3.5 by 10.36%, SD3 by 5.19%, and Flux-Dev by 3.02% in FID on average. These results demonstrate the effectiveness of NoiseShift in mitigating resolution-dependent artifacts and enhancing the quality of low-resolution image generation.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

The Laser Interferometer Space Antenna (LISA) will be the first space-based gravitational wave (GW) observatory. It will measure gravitational wave signals in the frequency regime from 0.1 mHz to 1 Hz. The success of these measurements will depend on the suppression of the various instrument noises. One important noise source in LISA will be tilt-to-length (TTL) coupling. Here, it is understood as the coupling of angular jitter, predominantly from the spacecraft, into the interferometric length readout. The current plan is to subtract this noise in-flight in post-processing as part of a noise minimization strategy. It is crucial to distinguish TTL coupling well from the GW signals in the same readout to ensure that the noise will be properly modeled. Furthermore, it is important that the subtraction of TTL noise will not degrade the GW signals. In the present manuscript, we show on simulated LISA data and for four different GW signal types that the GW responses have little effect on the quality of the TTL coupling fit and subtraction. Also, the GW signal characteristics were not altered by the TTL coupling subtraction.

The data collected by the current network of gravitational-wave detectors are largely dominated by instrumental noise. Total variation methods based on L1-norm minimization have recently been proposed as a powerful technique for noise removal in gravitational-wave data. In particular, the regularized Rudin-Osher-Fatemi (rROF) model has proven effective to denoise signals embedded in either simulated Gaussian noise or actual detector noise. Importing the rROF model to existing search pipelines seems therefore worth considering. In this paper, we discuss the implementation of two variants of the rROF algorithm as two separate plug-ins of the coherent Wave Burst (cWB) pipeline designed to conduct searches of unmodelled gravitational-wave burst sources. The first approach is based on a single-step rROF method and the second one employs an iterative rROF procedure. Both approaches are calibrated using actual gravitational-wave events from the first three observing runs of the LIGO-Virgo-KAGRA collaboration, namely GW1501914, GW151226, GW170817, and GW190521, encompassing different types of compact binary coalescences. Our analysis shows that the iterative version of the rROF denoising algorithm implemented in the cWB pipeline effectively eliminates noise while preserving the waveform signals intact. Therefore, the combined approach yields higher signal-to-noise values than those computed by the cWB pipeline without the rROF denoising step. The incorporation of the iterative rROF algorithm in the cWB pipeline might hence impact the detectability capabilities of the pipeline along with the inference of source properties.

We investigate the recovery of vectors from magnitudes of frame coefficients when the frames have a low redundancy, meaning a small number of frame vectors compared to the dimension of the Hilbert space. We first show that for vectors in d dimensions, 4d-4 suitably chosen frame vectors are sufficient to uniquely determine each signal, up to an overall unimodular constant, from the magnitudes of its frame coefficients. Then we discuss the effect of noise and show that 8d-4 frame vectors provide a stable recovery if part of the frame coefficients is bounded away from zero. In this regime, perturbing the magnitudes of the frame coefficients by noise that is sufficiently small results in a recovery error that is at most proportional to the noise level.

Capability evaluations aim to surface dangerous model behaviors before deployment, but their reliability depends on the assumption that hidden capabilities can be elicited. We show this assumption does not hold under adversarial conditions by constructing backdoor attacks that embed encrypted neural networks within host model weights, decrypting and executing them only upon receiving a secret trigger. Using digital lockers, these hidden circuits remain provably hard to elicit and interpret under cryptographic assumptions, even given full access to model weights, extending prior work from hiding fixed strings to arbitrary computations. We implement our proof of concept constructions in PyTorch and evaluate elicitation through fine-tuning, weight noising, gradient-based trigger search, and latent adversarial training, using a small chemical reaction prediction task as a proxy for CBRN-relevant capabilities. Our results demonstrate resistance to these methods and, together with our cryptographic guarantees, reveal a limit of elicitation-based capability audits. We release our models to support the improvement of defenses.

The overarching objective of this paper is two-fold. First, to explore model-based approaches to characterize the primary cause of the noise. in the RE dataset TACRED Second, to identify the potentially noisy instances. Towards the first objective, we analyze predictions and performance of state-of-the-art (SOTA) models to identify the root cause of noise in the dataset. Our analysis of TACRED shows that the majority of the noise in the dataset originates from the instances labeled as no-relation which are negative examples. For the second objective, we explore two nearest-neighbor-based strategies to automatically identify potentially noisy examples for elimination and reannotation. Our first strategy, referred to as Intrinsic Strategy (IS), is based on the assumption that positive examples are clean. Thus, we have used false-negative predictions to identify noisy negative examples. Whereas, our second approach, referred to as Extrinsic Strategy, is based on using a clean subset of the dataset to identify potentially noisy negative examples. Finally, we retrained the SOTA models on the eliminated and reannotated dataset. Our empirical results based on two SOTA models trained on TACRED-E following the IS show an average 4% F1-score improvement, whereas reannotation (TACRED-R) does not improve the original results. However, following ES, SOTA models show the average F1-score improvement of 3.8% and 4.4% when trained on respective eliminated (TACRED-EN) and reannotated (TACRED-RN) datasets respectively. We further extended the ES for cleaning positive examples as well, which resulted in an average performance improvement of 5.8% and 5.6% for the eliminated (TACRED-ENP) and reannotated (TACRED-RNP) datasets respectively.

The drone has been used for various purposes, including military applications, aerial photography, and pesticide spraying. However, the drone is vulnerable to external disturbances, and malfunction in propellers and motors can easily occur. To improve the safety of drone operations, one should detect the mechanical faults of drones in real-time. This paper proposes a sound-based deep neural network (DNN) fault classifier and drone sound dataset. The dataset was constructed by collecting the operating sounds of drones from microphones mounted on three different drones in an anechoic chamber. The dataset includes various operating conditions of drones, such as flight directions (front, back, right, left, clockwise, counterclockwise) and faults on propellers and motors. The drone sounds were then mixed with noises recorded in five different spots on the university campus, with a signal-to-noise ratio (SNR) varying from 10 dB to 15 dB. Using the acquired dataset, we train a DNN classifier, 1DCNN-ResNet, that classifies the types of mechanical faults and their locations from short-time input waveforms. We employ multitask learning (MTL) and incorporate the direction classification task as an auxiliary task to make the classifier learn more general audio features. The test over unseen data reveals that the proposed multitask model can successfully classify faults in drones and outperforms single-task models even with less training data.

Score Distillation Sampling (SDS) has emerged as an effective technique for leveraging 2D diffusion priors for tasks such as text-to-3D generation. While powerful, SDS struggles with achieving fine-grained alignment to user intent. To overcome this, we introduce RewardSDS, a novel approach that weights noise samples based on alignment scores from a reward model, producing a weighted SDS loss. This loss prioritizes gradients from noise samples that yield aligned high-reward output. Our approach is broadly applicable and can extend SDS-based methods. In particular, we demonstrate its applicability to Variational Score Distillation (VSD) by introducing RewardVSD. We evaluate RewardSDS and RewardVSD on text-to-image, 2D editing, and text-to-3D generation tasks, showing significant improvements over SDS and VSD on a diverse set of metrics measuring generation quality and alignment to desired reward models, enabling state-of-the-art performance. Project page is available at https://itaychachy. github.io/reward-sds/.

Reinforcement learning (RL) has become essential to the post-training of large language models (LLMs) for reasoning, agentic capabilities and alignment. Successful RL relies on sufficient exploration of diverse actions by the model during training, which creates a potential failure mode: a model could strategically alter its exploration during training to influence the subsequent training outcome. In this paper we study this behavior, called exploration hacking. First, we create model organisms of selective RL resistance by fine-tuning LLMs to follow specific underperformance strategies; these models can successfully resist our RL-based capability elicitation in agentic biosecurity and AI R&D environments while maintaining performance on related tasks. We then use our model organisms to evaluate detection and mitigation strategies, including monitoring, weight noising, and SFT-based elicitation. Finally, we show that current frontier models can exhibit explicit reasoning about suppressing their exploration when provided with sufficient information about their training context, with higher rates when this information is acquired indirectly through the environment. Together, our results suggest exploration hacking is a possible failure mode of RL on sufficiently capable LLMs.

Recent studies indicate that deep neural networks degrade in generalization performance under noisy supervision. Existing methods focus on isolating clean subsets or correcting noisy labels, facing limitations such as high computational costs, heavy hyperparameter tuning process, and coarse-grained optimization. To address these challenges, we propose a novel two-stage noisy learning framework that enables instance-level optimization through a dynamically weighted loss function, avoiding hyperparameter tuning. To obtain stable and accurate information about noise modeling, we introduce a simple yet effective metric, termed wrong event, which dynamically models the cleanliness and difficulty of individual samples while maintaining computational costs. Our framework first collects wrong event information and builds a strong base model. Then we perform noise-robust training on the base model, using a probabilistic model to handle the wrong event information of samples. Experiments on five synthetic and real-world LNL benchmarks demonstrate our method surpasses state-of-the-art methods in performance, achieves a nearly 75% reduction in computational time and improves model scalability.

Diffusion models learn to restore noisy data, which is corrupted with different levels of noise, by optimizing the weighted sum of the corresponding loss terms, i.e., denoising score matching loss. In this paper, we show that restoring data corrupted with certain noise levels offers a proper pretext task for the model to learn rich visual concepts. We propose to prioritize such noise levels over other levels during training, by redesigning the weighting scheme of the objective function. We show that our simple redesign of the weighting scheme significantly improves the performance of diffusion models regardless of the datasets, architectures, and sampling strategies.

Many studies of animal vocalizations require clean recordings, but animals are usually recorded in the field, with background noise from weather, vehicles, and other animals. Animal vocalization denoising is challenged by the scarcity of clean training data and the extreme diversity of animal vocalizations. Classical spectral gates leave residual noise, especially without voice activity detection (VAD), while detector-free neural denoisers designed for bioacoustics remove less noise. We show that a general-purpose source separation foundation model, SAM-Audio, removes more noise than either of these types of methods, when used without training and prompted with time spans from a simple animal VAD. To turn this heavy method into a practical tool, we distill it into CallCleaner, a 19M-parameter denoiser that needs no detector and runs ~90x faster than real time on a laptop CPU. We find that SI-SDR has limited utility in our setting as it penalizes regenerated output and conflates noise removal with call fidelity, a trade-off our separate metrics reveal. CallCleaner leaves 11 dB less noise around the call than Biodenoising, the leading neural bioacoustic denoiser with public weights, and among fast, CPU-capable systems it pushes the Pareto frontier of noise removal vs. call fidelity, without requiring a detector. We release code and weights for CallCleaner, which enables fast, private, local denoising of single-caller recordings without specialized hardware.

The INTERSPEECH 2020 Deep Noise Suppression Challenge is intended to promote collaborative research in real-time single-channel Speech Enhancement aimed to maximize the subjective (perceptual) quality of the enhanced speech. A typical approach to evaluate the noise suppression methods is to use objective metrics on the test set obtained by splitting the original dataset. Many publications report reasonable performance on the synthetic test set drawn from the same distribution as that of the training set. However, often the model performance degrades significantly on real recordings. Also, most of the conventional objective metrics do not correlate well with subjective tests and lab subjective tests are not scalable for a large test set. In this challenge, we open-source a large clean speech and noise corpus for training the noise suppression models and a representative test set to real-world scenarios consisting of both synthetic and real recordings. We also open source an online subjective test framework based on ITU-T P.808 for researchers to quickly test their developments. The winners of this challenge will be selected based on subjective evaluation on a representative test set using P.808 framework.

Electrocardiography (ECG) signals are often degraded by noise, which complicates diagnosis in clinical and wearable settings. This study proposes a diffusion-based framework for ECG noise quantification via reconstruction-based anomaly detection, addressing annotation inconsistencies and the limited generalizability of conventional methods. We introduce a distributional evaluation using the Wasserstein-1 distance (W_1), comparing the reconstruction error distributions between clean and noisy ECGs to mitigate inconsistent annotations. Our final model achieved robust noise quantification using only three reverse diffusion steps. The model recorded a macro-average W_1 score of 1.308 across the benchmarks, outperforming the next-best method by over 48%. External validations demonstrated strong generalizability, supporting the exclusion of low-quality segments to enhance diagnostic accuracy and enable timely clinical responses to signal degradation. The proposed method enhances clinical decision-making, diagnostic accuracy, and real-time ECG monitoring capabilities, supporting future advancements in clinical and wearable ECG applications.

A stochastic gravitational wave background causes the apparent positions of distant sources to fluctuate, with angular deflections of order the characteristic strain amplitude of the gravitational waves. These fluctuations may be detectable with high precision astrometry, as first suggested by Braginsky et al. in 1990. Several researchers have made order of magnitude estimates of the upper limits obtainable on the gravitational wave spectrum \Omega_gw(f), at frequencies of order f ~ 1 yr^-1, both for the future space-based optical interferometry missions GAIA and SIM, and for VLBI interferometry in radio wavelengths with the SKA. For GAIA, tracking N ~ 10^6 quasars over a time of T ~ 1 yr with an angular accuracy of \Delta \theta ~ 10 \mu as would yield a sensitivity level of \Omega_gw ~ (\Delta \theta)^2/(N T^2 H_0^2) ~ 10^-6, which would be comparable with pulsar timing. In this paper we take a first step toward firming up these estimates by computing in detail the statistical properties of the angular deflections caused by a stochastic background. We compute analytically the two point correlation function of the deflections on the sphere, and the spectrum as a function of frequency and angular scale. The fluctuations are concentrated at low frequencies (for a scale invariant stochastic background), and at large angular scales, starting with the quadrupole. The magnetic-type and electric-type pieces of the fluctuations have equal amounts of power.

When sound waves hit an object, they induce vibrations that produce high-frequency and subtle visual changes, which can be used for recovering the sound. Early studies always encounter trade-offs related to sampling rate, bandwidth, field of view, and the simplicity of the optical path. Recent advances in event camera hardware show good potential for its application in visual sound recovery, because of its superior ability in capturing high-frequency signals. However, existing event-based vibration recovery methods are still sub-optimal for sound recovery. In this work, we propose a novel pipeline for non-contact sound recovery, fully utilizing spatial-temporal information from the event stream. We first generate a large training set using a novel simulation pipeline. Then we designed a network that leverages the sparsity of events to capture spatial information and uses Mamba to model long-term temporal information. Lastly, we train a spatial aggregation block to aggregate information from different locations to further improve signal quality. To capture event signals caused by sound waves, we also designed an imaging system using a laser matrix to enhance the gradient and collected multiple data sequences for testing. Experimental results on synthetic and real-world data demonstrate the effectiveness of our method.

Separating a stochastic gravitational wave background (SGWB) from noise is a challenging statistical task. One approach to establishing a detection criterion for the SGWB is using Bayesian evidence. If the evidence ratio (Bayes factor) between models with and without the signal exceeds a certain threshold, the signal is considered detected. We present a formalism to compute the averaged Bayes factor, incorporating instrumental-noise and SGWB uncertainties. As an example, we consider the case of power-law-shaped SGWB in LISA and generate the corresponding bayesian sensitivity curve. Unlike existing methods in the literature, which typically neglect uncertainties in both the signal and noise, our approach provides a reliable and realistic alternative. This flexible framework opens avenues for more robust stochastic gravitational wave background detection across gravitational-wave experiments.

Electromyogenic (EMG) noise is a major contamination source in EEG data that can impede accurate analysis of brain-specific neural activity. Recent literature on EMG artifact removal has moved beyond traditional linear algorithms in favor of machine learning-based systems. However, existing deep learning-based filtration methods often have large compute footprints and prohibitively long training times. In this study, we present a new machine learning-based system for filtering EMG interference from EEG data using an autoencoder-targeted adversarial transformer (AT-AT). By leveraging the lightweight expressivity of an autoencoder to determine optimal time-series transformer application sites, our AT-AT architecture achieves a >90% model size reduction compared to published artifact removal models. The addition of adversarial training ensures that filtered signals adhere to the fundamental characteristics of EEG data. We trained AT-AT using published neural data from 67 subjects and found that the system was able to achieve comparable test performance to larger models; AT-AT posted a mean reconstructive correlation coefficient above 0.95 at an initial signal-to-noise ratio (SNR) of 2 dB and 0.70 at -7 dB SNR. Further research generalizing these results to broader sample sizes beyond these isolated test cases will be crucial; while outside the scope of this study, we also include results from a real-world deployment of AT-AT in the Appendix.

Large audio-language models (LALMs) unify speech and text processing, but their robustness in noisy real-world settings remains underexplored. We investigate how irrelevant audio, such as silence, synthetic noise, and environmental sounds, affects text reasoning tasks where audio is unnecessary. Across three text-based benchmarks, we find that even non-informative audio reduces accuracy and increases prediction volatility; the severity of interference scales with longer durations, higher amplitudes, and elevated decoding temperatures. Silence, often assumed neutral, destabilizes outputs as strongly as synthetic noise. While larger models show greater resilience, vulnerabilities persist across all evaluated systems. We further test mitigation strategies and find that prompting shows limited effectiveness, whereas self-consistency improves stability at the cost of increased computation. Our results reveal cross-modal interference as a key robustness challenge and highlight the need for efficient fusion strategies that preserve reasoning performance in the presence of irrelevant inputs.

Conventional acoustic beamformers assume that noise is stationary within short time frames. This assumption prevents them from exploiting correlations between frequencies in almost-periodic noise sources such as musical instruments, fans, and engines. These signals exhibit periodically varying statistics and are better modeled as cyclostationary processes. This paper introduces the cyclic MVDR (cMVDR) beamformer, an extension of the conventional MVDR that leverages both spatial and spectral correlations to improve noise reduction, particularly in low-SNR scenarios. The method builds on frequency-shifted (FRESH) filtering, where shifted versions of the input are combined to attenuate or amplify components that are coherent across frequency. To address inharmonicity, where harmonic partials deviate from exact integer multiples of the fundamental frequency, we propose a data-driven strategy that estimates resonant frequencies via periodogram analysis and computes the frequency shifts from their spacing. Analytical and experimental results demonstrate that performance improves with increasing spectral correlation. On real recordings, the cMVDR achieves up to 5 dB gain in scale-invariant signal-to-distortion ratio (SI-SDR) over the MVDR and remains effective even with a single microphone. Code is available at https://github.com/Screeen/cMVDR.

Noisy partial label learning (noisy PLL) is an important branch of weakly supervised learning. Unlike PLL where the ground-truth label must conceal in the candidate label set, noisy PLL relaxes this constraint and allows the ground-truth label may not be in the candidate label set. To address this challenging problem, most of the existing works attempt to detect noisy samples and estimate the ground-truth label for each noisy sample. However, detection errors are unavoidable. These errors can accumulate during training and continuously affect model optimization. To this end, we propose a novel framework for noisy PLL with theoretical guarantees, called ``Adjusting Label Importance Mechanism (ALIM)''. It aims to reduce the negative impact of detection errors by trading off the initial candidate set and model outputs. ALIM is a plug-in strategy that can be integrated with existing PLL approaches. Experimental results on benchmark datasets demonstrate that our method can achieve state-of-the-art performance on noisy PLL. \textcolor[rgb]{0.93,0.0,0.47}{Our code can be found in Supplementary Material}.

We establish a new theoretical framework for learning under multi-class, instance-dependent label noise. This framework casts learning with label noise as a form of domain adaptation, in particular, domain adaptation under posterior drift. We introduce the concept of relative signal strength (RSS), a pointwise measure that quantifies the transferability from noisy to clean posterior. Using RSS, we establish nearly matching upper and lower bounds on the excess risk. Our theoretical findings support the simple Noise Ignorant Empirical Risk Minimization (NI-ERM) principle, which minimizes empirical risk while ignoring label noise. Finally, we translate this theoretical insight into practice: by using NI-ERM to fit a linear classifier on top of a self-supervised feature extractor, we achieve state-of-the-art performance on the CIFAR-N data challenge.

Human subjective evaluation is the gold standard to evaluate speech quality optimized for human perception. Perceptual objective metrics serve as a proxy for subjective scores. The conventional and widely used metrics require a reference clean speech signal, which is unavailable in real recordings. The no-reference approaches correlate poorly with human ratings and are not widely adopted in the research community. One of the biggest use cases of these perceptual objective metrics is to evaluate noise suppression algorithms. This paper introduces a multi-stage self-teaching based perceptual objective metric that is designed to evaluate noise suppressors. The proposed method generalizes well in challenging test conditions with a high correlation to human ratings.

Factory machinery is prone to failure or breakdown, resulting in significant expenses for companies. Hence, there is a rising interest in machine monitoring using different sensors including microphones. In the scientific community, the emergence of public datasets has led to advancements in acoustic detection and classification of scenes and events, but there are no public datasets that focus on the sound of industrial machines under normal and anomalous operating conditions in real factory environments. In this paper, we present a new dataset of industrial machine sounds that we call a sound dataset for malfunctioning industrial machine investigation and inspection (MIMII dataset). Normal sounds were recorded for different types of industrial machines (i.e., valves, pumps, fans, and slide rails), and to resemble a real-life scenario, various anomalous sounds were recorded (e.g., contamination, leakage, rotating unbalance, and rail damage). The purpose of releasing the MIMII dataset is to assist the machine-learning and signal-processing community with their development of automated facility maintenance. The MIMII dataset is freely available for download at: https://zenodo.org/record/3384388

Machine learning models are routinely used to support decisions that affect individuals -- be it to screen a patient for a serious illness or to gauge their response to treatment. In these tasks, we are limited to learning models from datasets with noisy labels. In this paper, we study the instance-level impact of learning under label noise. We introduce a notion of regret for this regime, which measures the number of unforeseen mistakes due to noisy labels. We show that standard approaches to learning under label noise can return models that perform well at a population-level while subjecting individuals to a lottery of mistakes. We present a versatile approach to estimate the likelihood of mistakes at the individual-level from a noisy dataset by training models over plausible realizations of datasets without label noise. This is supported by a comprehensive empirical study of label noise in clinical prediction tasks. Our results reveal how failure to anticipate mistakes can compromise model reliability and adoption -- we demonstrate how we can address these challenges by anticipating and avoiding regretful decisions.

Active Motor Noise Cancellation (AMNC) ships in commercial fused deposition modeling (FDM) 3D printers as a hardware countermeasure against acoustic side-channel attacks that target intellectual property (IP). We present the first empirical evaluation of a deployed AMNC countermeasure, using a public dataset of synchronized acoustic and vibration recordings from two AMNC-equipped Bambu Lab printers across 12 object classes. AMNC fully neutralizes the acoustic channel: classification accuracy is indistinguishable from the 8.33% random baseline. The vibration channel, which AMNC does not target, still leaks. With summary statistics the leak is coarse and amplitude-driven (vibration accuracy approximately 31% pooled, 36-47% within-printer), while the waveform shape carries essentially nothing (frequency-only features at chance). A full-sequence temporal model that ingests the ordered evolution of the print raises accuracy to approximately 61%, and an order-shuffling control (approximately 33%) shows that a substantial component is genuinely sequential and tied to print progression. The leak is device-specific: a classifier trained on one printer transfers near chance to the other. We conclude that AMNC is an acoustic-only defense: vibration remains a partial, geometry-correlated side channel it does not address, but one that does not, on this dataset, support full geometric reconstruction; reconstruction-grade attacks would require the magnetic or power channels AMNC also leaves untouched. We release all code.

Recently, there has been extensive research interest in training deep networks to denoise images without clean reference. However, the representative approaches such as Noise2Noise, Noise2Void, Stein's unbiased risk estimator (SURE), etc. seem to differ from one another and it is difficult to find the coherent mathematical structure. To address this, here we present a novel approach, called Noise2Score, which reveals a missing link in order to unite these seemingly different approaches. Specifically, we show that image denoising problems without clean images can be addressed by finding the mode of the posterior distribution and that the Tweedie's formula offers an explicit solution through the score function (i.e. the gradient of log likelihood). Our method then uses the recent finding that the score function can be stably estimated from the noisy images using the amortized residual denoising autoencoder, the method of which is closely related to Noise2Noise or Nose2Void. Our Noise2Score approach is so universal that the same network training can be used to remove noises from images that are corrupted by any exponential family distributions and noise parameters. Using extensive experiments with Gaussian, Poisson, and Gamma noises, we show that Noise2Score significantly outperforms the state-of-the-art self-supervised denoising methods in the benchmark data set such as (C)BSD68, Set12, and Kodak, etc.

We empirically study the effect of noise scheduling strategies for denoising diffusion generative models. There are three findings: (1) the noise scheduling is crucial for the performance, and the optimal one depends on the task (e.g., image sizes), (2) when increasing the image size, the optimal noise scheduling shifts towards a noisier one (due to increased redundancy in pixels), and (3) simply scaling the input data by a factor of b while keeping the noise schedule function fixed (equivalent to shifting the logSNR by log b) is a good strategy across image sizes. This simple recipe, when combined with recently proposed Recurrent Interface Network (RIN), yields state-of-the-art pixel-based diffusion models for high-resolution images on ImageNet, enabling single-stage, end-to-end generation of diverse and high-fidelity images at 1024times1024 resolution (without upsampling/cascades).

Low-light photography produces images with low signal-to-noise ratios due to limited photons. In such conditions, common approximations like the Gaussian noise model fall short, and many denoising techniques fail to remove noise effectively. Although deep-learning methods perform well, they require large datasets of paired images that are impractical to acquire. As a remedy, synthesizing realistic low-light noise has gained significant attention. In this paper, we investigate the ability of diffusion models to capture the complex distribution of low-light noise. We show that a naive application of conventional diffusion models is inadequate for this task and propose three key adaptations that enable high-precision noise generation without calibration or post-processing: a two-branch architecture to better model signal-dependent and signal-independent noise, the incorporation of positional information to capture fixed-pattern noise, and a tailored diffusion noise schedule. Consequently, our model enables the generation of large datasets for training low-light denoising networks, leading to state-of-the-art performance. Through comprehensive analysis, including statistical evaluation and noise decomposition, we provide deeper insights into the characteristics of the generated data.

Echocardiography has been a prominent tool for the diagnosis of cardiac disease. However, these diagnoses can be heavily impeded by poor image quality. Acoustic clutter emerges due to multipath reflections imposed by layers of skin, subcutaneous fat, and intercostal muscle between the transducer and heart. As a result, haze and other noise artifacts pose a real challenge to cardiac ultrasound imaging. In many cases, especially with difficult-to-image patients such as patients with obesity, a diagnosis from B-Mode ultrasound imaging is effectively rendered unusable, forcing sonographers to resort to contrast-enhanced ultrasound examinations or refer patients to other imaging modalities. Tissue harmonic imaging has been a popular approach to combat haze, but in severe cases is still heavily impacted by haze. Alternatively, denoising algorithms are typically unable to remove highly structured and correlated noise, such as haze. It remains a challenge to accurately describe the statistical properties of structured haze, and develop an inference method to subsequently remove it. Diffusion models have emerged as powerful generative models and have shown their effectiveness in a variety of inverse problems. In this work, we present a joint posterior sampling framework that combines two separate diffusion models to model the distribution of both clean ultrasound and haze in an unsupervised manner. Furthermore, we demonstrate techniques for effectively training diffusion models on radio-frequency ultrasound data and highlight the advantages over image data. Experiments on both in-vitro and in-vivo cardiac datasets show that the proposed dehazing method effectively removes haze while preserving signals from weakly reflected tissue.