qshub / workflow /wall_extractor.py
basel00omar's picture
fix: Remove circular import of parse_json causing errors on server during elevation and plan extraction
04cb7d1
Raw History Blame Contribute Delete
1.56 kB
import json
import logging
from utils.key_manager import KeyManager
logger = logging.getLogger(__name__)
# Prompt strictly focused on tracing wall lengths
WALL_PROMPT = """This is a floor plan of a UAE villa. Your ONLY task is to estimate the total length of INTERNAL partition walls AND the total length of EXTERNAL walls on this floor. DO NOT attempt to read room dimensions or count doors. Focus 100% of your attention on tracing wall lines and dimension lines.
Read every dimension line shown on the plan. Trace each wall segment (don't double-count where two walls meet at a corner — count each segment once).
- "int_walls_10cm_m" / "int_walls_20cm_m": total length (METRES) of the INTERNAL walls BY THICKNESS, read from the plan. 10 cm (100 mm) = thin partitions (around bathrooms/WCs, closets/dressing, light dividers); 20 cm (200 mm) = the main internal walls between rooms. Read the wall line thickness / any wall-type note. If you truly cannot tell them apart, return the total sum under "int_walls_20cm_m" and 0 for 10cm.
Return ONLY this JSON (no markdown):
{
"int_walls_10cm_m": 0.0,
"int_walls_20cm_m": 0.0,
"confidence":"high|medium|low","notes":""
}"""
async def extract_wall_data(image_path: str, key_manager: KeyManager = None) -> dict:
from workflow.step3_extract import _ask_ai_with_retry
with open(image_path, "rb") as f:
img_bytes = f.read()
raw = await _ask_ai_with_retry(img_bytes, WALL_PROMPT, key_manager)
import re
raw = re.sub(r"```json|```", "", raw).strip()
return json.loads(raw)