Update config.yml

config.yml

@@ -1,249 +1,146 @@
-token: "lip_NzWp9zQDpAm0C4O9mBeA"    # Lichess OAuth2 Token.
+token: "lip_NzWp9zQDpAm0C4O9mBeA"                          # Your Lichess OAuth2 Token.
 url: "https://lichess.org/"        # Lichess base URL.
 
 engine:                            # Engine settings.
-  dir: "./fairy"                # Directory containing the engine. This can be an absolute path or one relative to lichess-bot/.
-  name: "stockfish"              # Binary name of the engine to use.
-  debug: False                     # When enabled, log all startup communication with the engine.
-# interpreter: "java"
-# interpreter_options:
-#   - "-jar"
-  working_dir: ""                  # Directory where the chess engine will read and write files. If blank or missing, the current directory is used.
-                                   # NOTE: If working_dir is set, the engine will look for files and directories relative to this directory, not where lichess-bot was launched. Absolute paths are unaffected.
-  protocol: "uci"                  # "uci", "xboard" or "homemade"
-  ponder: true                     # Think on opponent's time.
+  dir: "./fairy"                 # Directory containing the engine.
+  name: "stockfish"      # Binary name of the engine.
+  debug: false
+  working_dir: ""
+  protocol: "uci"
+  ponder: false                    # Engine does not support pondering.
 
   polyglot:
-    enabled: false                 # Activate polyglot book.
+    enabled: false
     book:
-      standard:                    # List of book file paths for variant standard.
+      standard:
         - engines/book1.bin
-        - engines/book2.bin
-#      atomic:                      # List of book file paths for variant atomic.
-#        - engines/atomicbook1.bin
-#        - engines/atomicbook2.bin
-#      etc.
-#      Use the same pattern for 'chess960', 'giveaway' (antichess), 'crazyhouse', 'horde', 'kingofthehill', 'racingkings' and '3check' as well.
-    min_weight: 1                  # Does not select moves with weight below min_weight (min 0, max: 100 if normalization isn't "none" else 65535).
-    selection: "weighted_random"   # Move selection is one of "weighted_random", "uniform_random" or "best_move" (but not below the min_weight in the 2nd and 3rd case).
-    max_depth: 20                  # How many moves from the start to take from the book.
-    normalization: "none"          # Normalization method for the book weights. One of "none", "sum", or "max".
+    min_weight: 1
+    selection: "weighted_random"
+    max_depth: 20
+    normalization: "none"
 
   draw_or_resign:
-    resign_enabled: false          # Whether or not the bot should resign.
-    resign_score: -1000            # If the score is less than or equal to this value, the bot resigns (in cp).
-    resign_for_egtb_minus_two: true # If true the bot will resign in positions where the online_egtb returns a wdl of -2.
-    resign_moves: 3                # How many moves in a row the score has to be below the resign value.
-    offer_draw_enabled: true       # Whether or not the bot should offer/accept draw.
-    offer_draw_score: 0            # If the absolute value of the score is less than or equal to this value, the bot offers/accepts draw (in cp).
-    offer_draw_for_egtb_zero: true # If true the bot will offer/accept draw in positions where the online_egtb returns a wdl of 0.
-    offer_draw_moves: 10           # How many moves in a row the absolute value of the score has to be below the draw value.
-    offer_draw_pieces: 10          # Only if the pieces on board are less than or equal to this value, the bot offers/accepts draw.
+    resign_enabled: false
+    resign_score: -1000
+    resign_for_egtb_minus_two: true
+    resign_moves: 3
+    offer_draw_enabled: true
+    offer_draw_score: 0
+    offer_draw_for_egtb_zero: true
+    offer_draw_moves: 10
+    offer_draw_pieces: 10
 
   online_moves:
-    max_out_of_book_moves: 10      # Stop using online opening books after they don't have a move for 'max_out_of_book_moves' positions. Doesn't apply to the online endgame tablebases.
-    max_retries: 2                 # The maximum amount of retries when getting an online move.
-    # max_depth: 10                # How many moves from the start to take from online books. Default is no limit.
+    max_out_of_book_moves: 10
+    max_retries: 2
     chessdb_book:
-      enabled: false               # Whether or not to use chessdb book.
-      min_time: 20                 # Minimum time (in seconds) to use chessdb book.
-      max_time: 10800              # Maximum starting game time (in seconds) to use chessdb book.
-      move_quality: "good"         # One of "all", "good", "best".
-      min_depth: 20                # Only for move_quality: "best".
+      enabled: false
+      min_time: 20
+      max_time: 10800
+      move_quality: "good"
+      min_depth: 20
     lichess_cloud_analysis:
-      enabled: false               # Whether or not to use lichess cloud analysis.
-      min_time: 20                 # Minimum time (in seconds) the bot must have to use cloud analysis.
-      max_time: 10800              # Maximum starting game time (in seconds) the bot must have to use cloud analysis.
-      move_quality: "best"         # One of "good", "best".
-      max_score_difference: 50     # Only for move_quality: "good". The maximum score difference (in cp) between the best move and the other moves.
+      enabled: false
+      min_time: 20
+      max_time: 10800
+      move_quality: "best"
+      max_score_difference: 50
       min_depth: 20
       min_knodes: 0
     lichess_opening_explorer:
       enabled: false
       min_time: 20
-      max_time: 10800              # Maximum starting game time (in seconds) the bot must have to use the lichess opening explorer.
-      source: "masters"            # One of "lichess", "masters", "player"
-      player_name: ""              # The lichess username. Leave empty for the bot's username to be used. Used only when source is "player".
-      sort: "winrate"              # One of "winrate", "games_played"
-      min_games: 10                # Minimum number of times a move must have been played to be chosen.
+      max_time: 10800
+      source: "masters"
+      player_name: ""
+      sort: "winrate"
+      min_games: 10
     online_egtb:
-      enabled: false               # Whether or not to enable online endgame tablebases.
-      min_time: 20                 # Minimum time (in seconds) the bot must have to use online EGTBs.
-      max_time: 10800              # Maximum starting game time (in seconds) the bot must have to use online EGTBs.
-      max_pieces: 8                # Maximum number of pieces on the board to use endgame tablebases.
-      source: "lichess"            # One of "lichess", "chessdb".
-      move_quality: "best"         # One of "best" or "suggest" (it takes all the moves with the same WDL and tells the engine to only consider these; will move instantly if there is only 1 "good" move).
+      enabled: false
+      min_time: 20
+      max_time: 10800
+      max_pieces: 8
+      source: "lichess"
+      move_quality: "best"
 
-  lichess_bot_tbs:                 # The tablebases list here will be read by lichess-bot, not the engine.
+  lichess_bot_tbs:
     syzygy:
-      enabled: false               # Whether or not to use local syzygy endgame tablebases.
-      paths:                       # Paths to Syzygy endgame tablebases.
+      enabled: false
+      paths:
         - "engines/syzygy"
-      max_pieces: 7                # Maximum number of pieces in the endgame tablebase.
-      move_quality: "best"         # One of "best" or "suggest" (it takes all the moves with the same WDL and tells the engine to only consider these; will move instantly if there is only 1 "good" move).
+      max_pieces: 7
+      move_quality: "best"
     gaviota:
-      enabled: false               # Whether or not to use local gaviota endgame tablebases.
+      enabled: false
       paths:
         - "engines/gaviota"
       max_pieces: 5
-      min_dtm_to_consider_as_wdl_1: 120 # The minimum DTM to consider as syzygy WDL=1/-1. Set to 100 to disable.
-      move_quality: "best"         # One of "best" or "suggest" (it takes all the moves with the same WDL and tells the engine to only consider these; will move instantly if there is only 1 "good" move).
-
-# engine_options:                  # Any custom command line params to pass to the engine.
-#   cpuct: 3.1
-
-  homemade_options:
-#   Hash: 256
+      min_dtm_to_consider_as_wdl_1: 120
+      move_quality: "best"
 
-  uci_options:                     # Arbitrary UCI options passed to the engine.
-#   Move Overhead: 100             # Increase if your bot flags games too often.
-#   Threads: 2                     # Max CPU threads the engine can use.
-#   Hash: 512                      # Max memory (in megabytes) the engine can allocate.
-#   SyzygyPath: "./syzygy/"        # Paths to Syzygy endgame tablebases that the engine reads.
-    Skill Level: 5
-#   movetime: 3000        # Search exactly 3000 milliseconds (3 seconds).
+  uci_options:                     # UCI options passed to the engine.
+    Move Overhead: 100
+    Skill Level: 5                 # 1=1000 Elo, 5=1500 Elo (default), 10=2000 Elo
 
-# xboard_options:                  # Arbitrary XBoard options passed to the engine.
-#   cores: "4"
-#   memory: "4096"
-#   egtpath:                       # Directory containing egtb (endgame tablabases), relative to this project. For 'xboard' engines.
-#     gaviota: "Gaviota path"
-#     nalimov: "Nalimov Path"
-#     scorpio: "Scorpio Path"
-#     syzygy: "Syzygy Path"
-#   go_commands:                   # Additional options to pass to the XBoard go command.
-#     depth: 5                     # Search depth ply only.
+  silence_stderr: false
 
-  silence_stderr: false            # Some engines (yes you, Leela) are very noisy.
-
-abort_time: 30                     # Time to abort a game in seconds when there is no activity.
-fake_think_time: false             # Artificially slow down the bot to pretend like it's thinking.
-rate_limiting_delay: 0             # Time (in ms) to delay after sending a move to prevent "Too Many Requests" errors.
-#move_overhead: 2000                # Increase if your bot flags games too often.
-max_takebacks_accepted: 0          # The number of times to allow an opponent to take back a move in a game.
-quit_after_all_games_finish: false # If set to true, then pressing Ctrl-C to quit will only stop lichess-bot after all current games have finished.
+abort_time: 30
+fake_think_time: false
+rate_limiting_delay: 0
+move_overhead: 2000
+max_takebacks_accepted: 0
+quit_after_all_games_finish: false
 
 correspondence:
-  move_time: 60                     # Time in seconds to search in correspondence games.
-  checkin_period: 300              # How often to check for opponent moves in correspondence games after disconnecting.
-  disconnect_time: 150             # Time before disconnecting from a correspondence game.
-  ponder: false                     # Ponder in correspondence games the bot is connected to.
-
-challenge:                         # Incoming challenges.
-  concurrency: 10                   # Number of games to play simultaneously.
-  sort_by: "best"                  # Possible values: "best" and "first".
-  preference: "none"               # Possible values: "none", "human", "bot".
-  accept_bot: true                 # Accepts challenges coming from other bots.
-  only_bot: false                  # Accept challenges by bots only.
-  max_increment: 20                # Maximum amount of increment to accept a challenge in seconds. The max is 180. Set to 0 for no increment.
-  min_increment: 0                 # Minimum amount of increment to accept a challenge in seconds.
-  max_base: 1800                   # Maximum amount of base time to accept a challenge in seconds. The max is 10800 (3 hours).
-  min_base: 0                      # Minimum amount of base time to accept a challenge in seconds.
-  max_days: 14                     # Maximum number of days per move to accept a challenge for a correspondence game.
-                                   # Unlimited games can be accepted by removing this field or specifying .inf
-  min_days: 1                      # Minimum number of days per move to accept a challenge for a correspondence game.
-  variants:                        # Chess variants to accept (https://lichess.org/variant).
+  move_time: 60
+  checkin_period: 300
+  disconnect_time: 150
+  ponder: false
+
+challenge:
+  concurrency: 1
+  sort_by: "best"
+  preference: "none"
+  accept_bot: true
+  only_bot: false
+  max_increment: 20
+  min_increment: 0
+  max_base: 1800
+  min_base: 0
+  max_days: 14
+  min_days: 1
+  variants:
     - standard
-#   - fromPosition
-#   - antichess
-#   - atomic
-    - chess960
-#   - crazyhouse
-#   - horde
-#   - kingOfTheHill
-#   - racingKings
-#   - threeCheck
-  time_controls:                   # Time controls to accept (bots are not allowed to play ultraBullet).
+  time_controls:
     - bullet
     - blitz
     - rapid
     - classical
-#   - correspondence
-  modes:                           # Game modes to accept.
-    - casual                       # Unrated games.
-    - rated                        # Rated games - must comment if the engine doesn't try to win.
-# block_list:                      # List of users from which the challenges are always declined.
-#   - user1
-#   - user2
-# online_block_list:               # The urls from which to retrieve a list of bot names that will not be challenged. The list should be a text file where each line contains the name of a blocked bot
-#   - example.com/blocklist
-# allow_list:                      # List of users from which challenges are exclusively accepted, all others being declined. If empty, challenges from all users may be accepted.
-#   - user3
-#   - user4
-# recent_bot_challenge_age: 60     # Maximum age of a bot challenge to be considered recent in seconds
-# max_recent_bot_challenges: 2     # Maximum number of recent challenges that can be accepted from the same bot
-# min_rating: 0                    # Minimum rating of the challenger to accept a challenge.
-# max_rating: 4000                 # Maximum rating of the challenger to accept a challenge. The maximum rating in lichess is 4000.
-# rating_difference: 300          # Maximum rating difference between the bot and the challenger. Overrides min_rating and max_rating if set.
-  bullet_requires_increment: false # Require that bullet game challenges from bots have a non-zero increment
-  max_simultaneous_games_per_user: 5  # Maximum number of simultaneous games with the same user
+  modes:
+    - casual
+    - rated
+  bullet_requires_increment: false
+  max_simultaneous_games_per_user: 5
 
 greeting:
-  # Optional substitution keywords (include curly braces):
-  #   {opponent} to insert opponent's name
-  #   {me} to insert bot's name
-  # Any other words in curly braces will be removed.
-  hello: "Hi! I'm {me}. Good luck! Type !help for a list of commands I can respond to." # Message to send to opponent chat at the start of a game
-  goodbye: "Good game!" # Message to send to opponent chat at the end of a game
-  hello_spectators: "Hi! I'm {me}. Type !help for a list of commands I can respond to." # Message to send to spectator chat at the start of a game
-  goodbye_spectators: "Thanks for watching!" # Message to send to spectator chat at the end of a game
-
-# pgn_directory: "game_records"    # A directory where PGN-format records of the bot's games are kept
-# pgn_file_grouping: "game"        # How to group games into files. Options are "game", "opponent", and "all"
-                                   # "game" (default) - every game is written to a different file named "{White name} vs. {Black name} - {lichess game ID}.pgn"
-                                   # "opponent" - every game with a given opponent is written to a file named "{Bot name} games vs. {Opponent name}.pgn"
-                                   # "all" - every game is written to a single file named "{Bot name} games.pgn"
+  hello: "Hi! I'm {me}, HectoChess1000 Model 1 C14. Good luck! Type !help for commands."
+  goodbye: "Good game!"
+  hello_spectators: "Hi! I'm {me}, HectoChess1000 Model 1 C14. Type !help for commands."
+  goodbye_spectators: "Thanks for watching!"
 
 matchmaking:
-  allow_matchmaking: false         # Set it to 'true' to challenge other bots.
-  allow_during_games: false        # Set it to 'true' to create challenges during long games.
-  challenge_variant: "random"      # If set to 'random', the bot will choose one variant from the variants enabled in 'challenge.variants'.
-  challenge_timeout: 30            # Create a challenge after being idle for 'challenge_timeout' minutes. The minimum is 1 minute.
-  challenge_initial_time:          # Initial time in seconds of the challenge (to be chosen at random).
+  allow_matchmaking: false
+  allow_during_games: false
+  challenge_variant: "random"
+  challenge_timeout: 30
+  challenge_initial_time:
     - 60
     - 180
-  challenge_increment:             # Increment in seconds of the challenge (to be chosen at random).
+  challenge_increment:
     - 1
     - 2
-#  challenge_days:                 # Days for correspondence challenge (to be chosen at random).
-#    - 1
-#    - 2
-# opponent_min_rating: 600         # Opponents rating should be above this value (600 is the minimum rating in lichess).
-# opponent_max_rating: 4000        # Opponents rating should be below this value (4000 is the maximum rating in lichess).
-  opponent_rating_difference: 300  # The maximum difference in rating between the bot's rating and opponent's rating.
-  rating_preference: "none"        # One of "none", "high", "low".
-  challenge_mode: "random"         # Set it to the mode in which challenges are sent. Possible options are 'casual', 'rated' and 'random'.
-  challenge_filter: none           # If a bot declines a challenge, do not issue a similar challenge to that bot. Possible options are 'none', 'coarse', and 'fine'.
-# block_list:                      # The list of bots that will not be challenged
-#   - user1
-#   - user2
-# online_block_list:               # The urls from which to retrieve a list of bot names that will not be challenged. The list should be a text file where each line contains the name of a blocked bot
-#   - example.com/blocklist
-  include_challenge_block_list: false  # Do not challenge bots in the challenge: block_list in addition to the matchmaking block list.
-
-# overrides:                       # List of overrides for the matchmaking specifications above. When a challenge is created, either the default specification above or one of the overrides will be randomly chosen.
-#   bullet_only_horde:             # Name of the override. Can be anything as long as each override has a unique name ("bullet_only_horde" and "easy_chess960" in these examples).
-#     challenge_variant: "horde"   # List of options to override. Only the options mentioned will change when making the challenge. The rest will follow the default matchmaking options above.
-#     challenge_initial_time:
-#       - 1
-#       - 2
-#     challenge_increment:
-#       - 0
-#       - 1
-#
-#   easy_chess960:
-#     challenge_variant: "chess960"
-#     opponent_min_rating: 400
-#     opponent_max_rating: 1200
-#     opponent_rating_difference:
-#     challenge_mode: casual
-#
-#   no_pressure_correspondence:
-#     challenge_initial_time:
-#     challenge_increment:
-#     challenge_days:
-#       - 2
-#       - 3
-#     challenge_mode: casual
-#
-# The following configurations cannot be overridden: allow_matchmaking, challenge_timeout, challenge_filter and block_list.
+  opponent_rating_difference: 300
+  rating_preference: "none"
+  challenge_mode: "random"
+  challenge_filter: none
+  include_challenge_block_list: false