[
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 3",
"cmd": "vlan 3",
"desc": "Creates VLAN 3 and enters VLAN configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "name Engineering",
"cmd": "name Engineering",
"desc": "Assigns a name to the VLAN. The length of the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "exit",
"cmd": "exit",
"desc": "Assigning Ports to Data and Voice VLANs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface fastethernet 0/1",
"cmd": "interface fastethernet 0/1",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport mode access",
"cmd": "switchport mode access",
"desc": "Sets the port to access mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport access vlan 10",
"cmd": "switchport access vlan 10",
"desc": "Assigns this port to data VLAN 10"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport voice vlan 11",
"cmd": "switchport voice vlan 11",
"desc": "Using the range Command"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/1 – 9",
"cmd": "interface range fastethernet 0/1 – 9",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport mode",
"cmd": "switchport mode",
"desc": "VIRTUAL LANS"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport nonegotiate",
"cmd": "switchport nonegotiate",
"desc": "Use the switchport mode nonegotiate command only when"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport trunk pruning vlan except 40-50",
"cmd": "switchport trunk pruning vlan except 40-50",
"desc": "Use the switchport mode nonegotiate command only when"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport mode trunk",
"cmd": "switchport mode trunk",
"desc": "Verifying VTP"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vtp status",
"cmd": "show vtp status",
"desc": "Displays general information about VTP"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vtp counters",
"cmd": "show vtp counters",
"desc": "Displays the VTP counters for the switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vtp password",
"cmd": "show vtp password",
"desc": "Verifying VLAN Information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vlan",
"cmd": "show vlan",
"desc": "Displays VLAN information"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vlan brief",
"cmd": "show vlan brief",
"desc": "Displays VLAN information in brief"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vlan id 2",
"cmd": "show vlan id 2",
"desc": "Displays information of VLAN 2 only"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vlan name marketing",
"cmd": "show vlan name marketing",
"desc": "Displays information of VLAN named marketing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show interfaces trunk",
"cmd": "show interfaces trunk",
"desc": "Displays the administrative and operational"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "show interfaces switchport",
"cmd": "show interfaces switchport",
"desc": "Displays the administrative and operational"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show interface fastethernet 0/1 trunk",
"cmd": "show interface fastethernet 0/1 trunk",
"desc": "The stored configurations of VLANs 1 through 1005 are always"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "delete flash:vlan.d at",
"cmd": "delete flash:vlan.d at",
"desc": "VIRTUAL LANS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "delete flash:vlan.dat Delete filename [vlan.dat]? Delete flash:vlan.da",
"cmd": "delete flash:vlan.dat Delete filename [vlan.dat]? Delete flash:vlan.dat? [confirm]",
"desc": "Configuration Example: VLANs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "enable",
"cmd": "enable",
"desc": "Moves to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "hostname Switch3650",
"cmd": "hostname Switch3650",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "hostname Switch2960",
"cmd": "hostname Switch2960",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "hostname DLSwitch",
"cmd": "hostname DLSwitch",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 1/0/3-4",
"cmd": "interface range gigabitethernet 1/0/3-4",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "hostname ALSwitch1",
"cmd": "hostname ALSwitch1",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/9 – 12",
"cmd": "interface range fastethernet 0/9 – 12",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 0/1 – 2",
"cmd": "interface range gigabitethernet 0/1 – 2",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "hostname ALSwitch2",
"cmd": "hostname ALSwitch2",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp mode server",
"cmd": "vtp mode server",
"desc": "Changes the switch to VTP server mode. Note"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp mode client",
"cmd": "vtp mode client",
"desc": "Changes the switch to VTP server mode. Note"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "no ip domain-lookup",
"cmd": "no ip domain-lookup",
"desc": "Changes the switch to VTP server mode. Note"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp domain ENCOR",
"cmd": "vtp domain ENCOR",
"desc": "Configures the VTP domain name to ENCOR"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp password Order66",
"cmd": "vtp password Order66",
"desc": "Sets the VTP password to Order66"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 10",
"cmd": "vlan 10",
"desc": "Creates VLAN 10 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/1 - 8",
"cmd": "interface range fastethernet 0/1 - 8",
"desc": "Creates VLAN 10 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "name Admin",
"cmd": "name Admin",
"desc": "Increases the revision number by 1 and"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 20",
"cmd": "vlan 20",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "name Accounting",
"cmd": "name Accounting",
"desc": "Assigns a name to the VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "name Marketing",
"cmd": "name Marketing",
"desc": "Assigns a name to the VLAN"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 30",
"cmd": "vlan 30",
"desc": "Exiting VLAN configuration mode adds"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 1/0/1-8",
"cmd": "interface range gigabitethernet 1/0/1-8",
"desc": "Enables you to set the same configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 1/0/9-15",
"cmd": "interface range gigabitethernet 1/0/9-15",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport access vlan 20",
"cmd": "switchport access vlan 20",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 1/0/16-24",
"cmd": "interface range gigabitethernet 1/0/16-24",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport access vlan 30",
"cmd": "switchport access vlan 30",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface",
"cmd": "interface",
"desc": "Using this interface will require the"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp version 3",
"cmd": "vtp version 3",
"desc": "Using this interface will require the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethernet 0/1",
"cmd": "interface gigabitethernet 0/1",
"desc": "Using this interface will require the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 1/0/1-4",
"cmd": "interface range gigabitethernet 1/0/1-4",
"desc": "Using this interface will require the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range gigabitethernet 1/0/1-2",
"cmd": "interface range gigabitethernet 1/0/1-2",
"desc": "Using this interface will require the"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport",
"cmd": "switchport",
"desc": "Enables VTP Version 3"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp pruning",
"cmd": "vtp pruning",
"desc": "Enables VTP pruning on this switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "end",
"cmd": "end",
"desc": "Returns to privileged EXEC mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp primary vlan force",
"cmd": "vtp primary vlan force",
"desc": "Configures the 3650 to be the VTP primary"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "copy runningconfig startup-config",
"cmd": "copy runningconfig startup-config",
"desc": "Configures the 3650 to be the VTP primary"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "copy running-config startup-config",
"cmd": "copy running-config startup-config",
"desc": "Enables you to set the same"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/9 - 15",
"cmd": "interface range fastethernet 0/9 - 15",
"desc": "Monitoring and Verifying EtherChannel"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/16 - 24",
"cmd": "interface range fastethernet 0/16 - 24",
"desc": "Monitoring and Verifying EtherChannel"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show running-config",
"cmd": "show running-config",
"desc": "Displays a list of what is"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "show running-config interface fastethernet 0/12",
"cmd": "show running-config interface fastethernet 0/12",
"desc": "Displays interface fastethernet"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "EtherChannel",
"title": "show interfaces fastethernet 0/12 etherchannel",
"cmd": "show interfaces fastethernet 0/12 etherchannel",
"desc": "Displays EtherChannel"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "EtherChannel",
"title": "show etherchannel",
"cmd": "show etherchannel",
"desc": "Displays all EtherChannel"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "EtherChannel",
"title": "show etherchannel 1 port-channel",
"cmd": "show etherchannel 1 port-channel",
"desc": "Displays port channel"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "EtherChannel",
"title": "show etherchannel summary",
"cmd": "show etherchannel summary",
"desc": "EtherChannel information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "show interface portchannel 1",
"cmd": "show interface portchannel 1",
"desc": "EtherChannel 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show lacp neighbor",
"cmd": "show lacp neighbor",
"desc": "Shows LACP neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show pagp neighbor",
"cmd": "show pagp neighbor",
"desc": "Shows PAgP neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "clear pagp 1 counters",
"cmd": "clear pagp 1 counters",
"desc": "Clears PAgP channel group 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "clear lacp 1 counters",
"cmd": "clear lacp 1 counters",
"desc": "Changes the switch to VTP server mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "channel-group 1 mode desirable",
"cmd": "channel-group 1 mode desirable",
"desc": "Changes the switch to VTP client mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "channel-group 2 mode desirable",
"cmd": "channel-group 2 mode desirable",
"desc": "Changes the switch to VTP client mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp domain testdomain",
"cmd": "vtp domain testdomain",
"desc": "Configures the VTP domain name to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/5 – 8",
"cmd": "interface range fastethernet 0/5 – 8",
"desc": "Moves to privileged EXEC mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "copy running-config startupconfig",
"cmd": "copy running-config startupconfig",
"desc": "Sets host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "copy",
"cmd": "copy",
"desc": "Sets host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "no ip domainlookup",
"cmd": "no ip domainlookup",
"desc": "VIRTUAL LANS"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 5",
"cmd": "spanning-tree vlan 5",
"desc": "Enables STP on VLAN"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "no spanning-tree vlan 5",
"cmd": "no spanning-tree vlan 5",
"desc": "You can configure different types of spanning trees on a Cisco"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mode pvst",
"cmd": "spanning-tree mode pvst",
"desc": "Enters MST mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mode mst",
"cmd": "spanning-tree mode mst",
"desc": "Enters MST mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mst configuration",
"cmd": "spanning-tree mst configuration",
"desc": "MST configuration"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mode rapid-pvst",
"cmd": "spanning-tree mode rapid-pvst",
"desc": "ENABLING SPANNING TREE PROTOCOL"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "clear spanning-tree detectedprotocols",
"cmd": "clear spanning-tree detectedprotocols",
"desc": "ENABLING SPANNING TREE PROTOCOL"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 5 root primary",
"cmd": "spanning-tree vlan 5 root primary",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree portfast default",
"cmd": "spanning-tree portfast default",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree bpduguard disable",
"cmd": "spanning-tree bpduguard disable",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "interface gigabitethernet 1/0/2",
"cmd": "interface gigabitethernet 1/0/2",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanning-tree summary",
"cmd": "show spanning-tree summary",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanning-tree active",
"cmd": "show spanning-tree active",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show",
"cmd": "show",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "errdisable detect cause inline-power",
"cmd": "errdisable detect cause inline-power",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show errdisable detect |",
"cmd": "show errdisable detect |",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "name region12",
"cmd": "name region12",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show current",
"cmd": "show current",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mst 2 cost 250",
"cmd": "spanning-tree mst 2 cost 250",
"desc": "The root switch should be a backbone or distribution switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 5 root primary diameter 6",
"cmd": "spanning-tree vlan 5 root primary diameter 6",
"desc": "ENABLING SPANNING TREE PROTOCOL"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 5 root secondary",
"cmd": "spanning-tree vlan 5 root secondary",
"desc": "This switch lowers its priority to 28672. If the root"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 5 root secondary diameter 7",
"cmd": "spanning-tree vlan 5 root secondary diameter 7",
"desc": "CONFIGURING A SECONDARY ROOT SWITCH"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree",
"cmd": "spanning-tree",
"desc": "Although the following commands are not mandatory for STP to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface gigabitethernet 1/0/10",
"cmd": "interface gigabitethernet 1/0/10",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree portfast",
"cmd": "spanning-tree portfast",
"desc": "Enables PortFast if the port is already"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree guard loop",
"cmd": "spanning-tree guard loop",
"desc": "Enables PortFast if the port is already"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "udld port [aggressive]",
"cmd": "udld port [aggressive]",
"desc": "Enables PortFast if the port is already"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree portfast disable",
"cmd": "spanning-tree portfast disable",
"desc": "Disables PortFast for the interface"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree portfast edge",
"cmd": "spanning-tree portfast edge",
"desc": "Enables the PortFast edge feature for the"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree portfast network",
"cmd": "spanning-tree portfast network",
"desc": "Bridge Assurance is enabled globally by default"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree portfast trunk",
"cmd": "spanning-tree portfast trunk",
"desc": "You can override the spanning-tree portfast default"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree interface gigabitethernet 1/0/10 portfast",
"cmd": "show spanning-tree interface gigabitethernet 1/0/10 portfast",
"desc": "BPDU Guard (2xxx/older 3xxx Series)"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree portfast bpduguard default",
"cmd": "spanning-tree portfast bpduguard default",
"desc": "Globally enables BPDU Guard on ports"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface range fastethernet 0/1 - 5",
"cmd": "interface range fastethernet 0/1 - 5",
"desc": "BPDU Guard"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree bpduguard enable",
"cmd": "spanning-tree bpduguard enable",
"desc": "Disables BPDU Guard on the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause bpduguard",
"cmd": "errdisable recovery cause bpduguard",
"desc": "Allows port to reenable itself if the cause"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery interval 400",
"cmd": "errdisable recovery interval 400",
"desc": "Sets recovery timer to 400 seconds. The"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanningtree summary totals",
"cmd": "show spanningtree summary totals",
"desc": "Verifies whether BPDU Guard is enabled"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show errdisable recovery",
"cmd": "show errdisable recovery",
"desc": "EXEC mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree bpdufilter enable",
"cmd": "spanning-tree bpdufilter enable",
"desc": "Displays global BPDU filtering"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-",
"cmd": "show spanning-",
"desc": "CONFIGURING THE SWITCH PRIORITY OF A VLAN"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree uplinkfast",
"cmd": "spanning-tree uplinkfast",
"desc": "Enables UplinkFast. UplinkFast provides fast"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree uplinkfast max-",
"cmd": "spanning-tree uplinkfast max-",
"desc": "Verifies whether UplinkFast has been enabled"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree uplinkfast",
"cmd": "show spanning-tree uplinkfast",
"desc": "Enables BackboneFast. BackboneFast is initiated when"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanningtree summary",
"cmd": "show spanningtree summary",
"desc": "Verifies BackboneFast has been enabled"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanningtree backbonefast",
"cmd": "show spanningtree backbonefast",
"desc": "Root Guard"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree inconsistentpo rts",
"cmd": "show spanning-tree inconsistentpo rts",
"desc": "Indicates whether any ports are in a rootinconsistent state"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree root",
"cmd": "show spanning-tree root",
"desc": "The show spanning-tree root command output includes root ID for all"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree",
"cmd": "show spanning-tree",
"desc": "Shows which ports are alternate or root ports"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree mst",
"cmd": "show spanning-tree mst",
"desc": "Moves to global configuration mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree loopguard default",
"cmd": "spanning-tree loopguard default",
"desc": "Enables Loop Guard globally on the switch for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "hostname Core",
"cmd": "hostname Core",
"desc": "Enables Loop Guard globally on the switch for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface gigabitethernet 1/0/1",
"cmd": "interface gigabitethernet 1/0/1",
"desc": "Enables Loop Guard on all the VLANs"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanning-tree interface detail",
"cmd": "show spanning-tree interface detail",
"desc": "Displays UDLD information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show udld interface",
"cmd": "show udld interface",
"desc": "Ethernet 1/0/1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "udld reset",
"cmd": "udld reset",
"desc": "The errdisable recovery command enables the network device"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause all",
"cmd": "errdisable detect cause all",
"desc": "Enables error detection for all errordisabled causes"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause bpduguard shutdown vlan",
"cmd": "errdisable detect cause bpduguard shutdown vlan",
"desc": "CONFIGURING THE SWITCH PRIORITY OF A VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause dhcp-ratelimit",
"cmd": "errdisable detect cause dhcp-ratelimit",
"desc": "Enables error detection for DHCP snooping"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause dtp-flap",
"cmd": "errdisable detect cause dtp-flap",
"desc": "Protocol (DTP) flapping"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause gbic-invalid",
"cmd": "errdisable detect cause gbic-invalid",
"desc": "Enables error detection for inline power"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause link-flap",
"cmd": "errdisable detect cause link-flap",
"desc": "Enables error detection for link-state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause loopback",
"cmd": "errdisable detect cause loopback",
"desc": "Enables error detection for detected"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause pagp-flap",
"cmd": "errdisable detect cause pagp-flap",
"desc": "Aggregation Protocol (PAgP) flap errordisabled cause"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause securityviolation shutdown vlan",
"cmd": "errdisable detect cause securityviolation shutdown vlan",
"desc": "Enables voice-aware 802.1X security"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable detect cause sfp-configmismatch",
"cmd": "errdisable detect cause sfp-configmismatch",
"desc": "The same interval is applied to all causes. The range is 30"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause parameter",
"cmd": "errdisable recovery cause parameter",
"desc": "Enables the error-disabled mechanism to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause all",
"cmd": "errdisable recovery cause all",
"desc": "Guard error-disabled state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause channelmisconfig",
"cmd": "errdisable recovery cause channelmisconfig",
"desc": "EtherChannel misconfiguration errordisabled state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause dhcp-ratelimit",
"cmd": "errdisable recovery cause dhcp-ratelimit",
"desc": "Enables the timer to recover from the DTP-"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause gbic-invalid",
"cmd": "errdisable recovery cause gbic-invalid",
"desc": "This error refers to an invalid SFP error-disabled state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause inline-power",
"cmd": "errdisable recovery cause inline-power",
"desc": "Enables the timer to recover for inline"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause link-flap",
"cmd": "errdisable recovery cause link-flap",
"desc": "Enables the timer to recover from the linkflap error-disabled state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause loopback",
"cmd": "errdisable recovery cause loopback",
"desc": "Enables the timer to recover from a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause pagp-flap",
"cmd": "errdisable recovery cause pagp-flap",
"desc": "PAgP-flap error-disabled state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause psecureviolation",
"cmd": "errdisable recovery cause psecureviolation",
"desc": "Enables the timer to recover from a port"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause securityviolation",
"cmd": "errdisable recovery cause securityviolation",
"desc": "Enables the timer to recover from an IEEE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "errdisable recovery cause sfp-mismatch",
"cmd": "errdisable recovery cause sfp-mismatch",
"desc": "Enables the timer to recover from an SFP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show errdisable detect",
"cmd": "show errdisable detect",
"desc": "CONFIGURING THE SWITCH PRIORITY OF A VLAN"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "clear spanning-tree detected-protocols",
"cmd": "clear spanning-tree detected-protocols",
"desc": "Restarts the protocol migration process. With"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "clear spanning-tree detected-protocols interface gigabitethernet 1/0/1",
"cmd": "clear spanning-tree detected-protocols interface gigabitethernet 1/0/1",
"desc": "Restarts the protocol migration process on"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "EtherChannel",
"title": "clear spanning-tree detected-protocols port-channel 1",
"cmd": "clear spanning-tree detected-protocols port-channel 1",
"desc": "Displays the summary of what is currently"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanning-tree detail",
"cmd": "show spanning-tree detail",
"desc": "Displays the summary of what is currently"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show pending",
"cmd": "show pending",
"desc": "Applies all changes and returns to global"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mst 1 priority 4096",
"cmd": "spanning-tree mst 1 priority 4096",
"desc": "You cannot run both MSTP and PVST at the same time"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mst 1",
"cmd": "spanning-tree mst 1",
"desc": "Configures a switch as a primary root switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mst 1 root secondary",
"cmd": "spanning-tree mst 1 root secondary",
"desc": "Configures a switch as a secondary root"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "spanning-tree mst 20 port-priority 0",
"cmd": "spanning-tree mst 20 port-priority 0",
"desc": "ENABLING RAPID SPANNING TREE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree",
"cmd": "show spanningtree",
"desc": "Displays STP information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree active",
"cmd": "show spanningtree active",
"desc": "Displays STP information on active"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree bridge",
"cmd": "show spanningtree bridge",
"desc": "Displays status and configuration of this"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree detail",
"cmd": "show spanningtree detail",
"desc": "Displays a detailed summary of interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree interface gigabitethernet 1/0/1",
"cmd": "show spanningtree interface gigabitethernet 1/0/1",
"desc": "Displays the total lines of the STP section"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show spanningtree vlan 5",
"cmd": "show spanningtree vlan 5",
"desc": "Displays STP information for VLAN 5"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree mst configuration",
"cmd": "show spanningtree mst configuration",
"desc": "Displays the MST region configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree mst configuration digest",
"cmd": "show spanningtree mst configuration digest",
"desc": "Displays the message digest 5 (MD5)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree mst 1",
"cmd": "show spanningtree mst 1",
"desc": "Displays the MST information for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree mst interface gigabitethernet 1/0/1",
"cmd": "show spanningtree mst interface gigabitethernet 1/0/1",
"desc": "VERIFYING STP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree mst 1 interface gigabitethernet 1/0/1",
"cmd": "show spanningtree mst 1 interface gigabitethernet 1/0/1",
"desc": "VERIFYING STP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "show spanningtree mst 1 detail",
"cmd": "show spanningtree mst 1 detail",
"desc": "VERIFYING STP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree all",
"cmd": "debug spanningtree all",
"desc": "Displays all spanning-tree"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree events",
"cmd": "debug spanningtree events",
"desc": "Displays spanning-tree debugging"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree backbonefast",
"cmd": "debug spanningtree backbonefast",
"desc": "BackboneFast events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree uplinkfast",
"cmd": "debug spanningtree uplinkfast",
"desc": "UplinkFast events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree mstp all",
"cmd": "debug spanningtree mstp all",
"desc": "Displays all MST debugging events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree switch state",
"cmd": "debug spanningtree switch state",
"desc": "Displays spanning-tree port state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "debug spanningtree pvst+",
"cmd": "debug spanningtree pvst+",
"desc": "Core Switch (3650)"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vtp domain STPDEMO",
"cmd": "vtp domain STPDEMO",
"desc": "TROUBLESHOOTING SPANNING TREE PROTOCOL"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 1 root primary",
"cmd": "spanning-tree vlan 1 root primary",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "hostname Distribution1",
"cmd": "hostname Distribution1",
"desc": "Configures the VTP domain name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "hostname Distribution2",
"cmd": "hostname Distribution2",
"desc": "Configures the VTP domain name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "hostname Access1",
"cmd": "hostname Access1",
"desc": "Configures the VTP domain name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "hostname",
"cmd": "hostname",
"desc": "Configures the VTP domain name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "no spanningtree uplinkfast",
"cmd": "no spanningtree uplinkfast",
"desc": "Configures the VTP domain name"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 10 root primary",
"cmd": "spanning-tree vlan 10 root primary",
"desc": "Configures the switch to become"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 20 root",
"cmd": "spanning-tree vlan 20 root",
"desc": "Configures the switch to become"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/6 - 12",
"cmd": "interface range fastethernet 0/6 - 12",
"desc": "Configures the switch to become"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "spanning-tree vlan 10 root secondary",
"cmd": "spanning-tree vlan 10 root secondary",
"desc": "Moves to interface range"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Spanning-Tree",
"title": "no spanningtree backbonefast",
"cmd": "no spanningtree backbonefast",
"desc": "STPDEMO"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface fastethernet 0/0",
"cmd": "interface fastethernet 0/0",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "no shutdown",
"cmd": "no shutdown",
"desc": "Enables the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "description link to ISP",
"cmd": "description link to ISP",
"desc": "Enables the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "description link to L3Switch1",
"cmd": "description link to L3Switch1",
"desc": "Enables the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Trunk Link to CORP Router",
"cmd": "description Trunk Link to CORP Router",
"desc": "Enables the interface"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport trunk encapsulation dot1q",
"cmd": "switchport trunk encapsulation dot1q",
"desc": "Enables the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:0:0:4::2/64",
"cmd": "ipv6 address 2001:0:0:4::2/64",
"desc": "Enables the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface fastethernet 0/0.1",
"cmd": "interface fastethernet 0/0.1",
"desc": "Creates subinterface 0/0.1 and moves to"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan 10",
"cmd": "interface vlan 10",
"desc": "Creates subinterface 0/0.1 and moves to"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan 20",
"cmd": "interface vlan 20",
"desc": "Creates subinterface 0/0.1 and moves to"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Management VLAN 1",
"cmd": "description Management VLAN 1",
"desc": "Best practices dictate that VLAN 1 should not be used for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "encapsulation dot1q 1 native",
"cmd": "encapsulation dot1q 1 native",
"desc": "Assigns VLAN 1 to this subinterface. VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.168.1.1 255.255.255.0",
"cmd": "ip address 192.168.1.1 255.255.255.0",
"desc": "Assigns the IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface fastethernet 0/0.10",
"cmd": "interface fastethernet 0/0.10",
"desc": "Creates subinterface 0/0.10 and moves to"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Accounting VLAN 10",
"cmd": "description Accounting VLAN 10",
"desc": "Assigns VLAN 10 to this subinterface. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "encapsulation dot1q 10",
"cmd": "encapsulation dot1q 10",
"desc": "Assigns VLAN 10 to this subinterface. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.168.10.1 255.255.255.0",
"cmd": "ip address 192.168.10.1 255.255.255.0",
"desc": "Configuring Inter-VLAN Communication on an L3 Switch"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan 1",
"cmd": "interface vlan 1",
"desc": "Creates a virtual interface for VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 172.16.1.1 255.255.255.0",
"cmd": "ip address 172.16.1.1 255.255.255.0",
"desc": "Returns to global configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 172.16.10.1 255.255.255.0",
"cmd": "ip address 172.16.10.1 255.255.255.0",
"desc": "Returns to global configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 172.16.20.1 255.255.255.0",
"cmd": "ip address 172.16.20.1 255.255.255.0",
"desc": "Returns to global configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip routing",
"cmd": "ip routing",
"desc": "Removing L2 Switchport Capability of an Interface on an L3 Switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "router eigrp 10",
"cmd": "router eigrp 10",
"desc": "Removing L2 Switchport Capability of an Interface on an L3 Switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet",
"cmd": "interface gigabitethernet",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "Routing",
"title": "no switchport",
"cmd": "no switchport",
"desc": "ISP Router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "hostname ISP",
"cmd": "hostname ISP",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "description simulated address representing remote website",
"cmd": "description simulated address representing remote website",
"desc": "Sets the locally significant"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "description WAN link to the Corporate Router",
"cmd": "description WAN link to the Corporate Router",
"desc": "Sets the locally significant"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 198.133.219.1 255.255.255.0",
"cmd": "ip address 198.133.219.1 255.255.255.0",
"desc": "Assigns an IP address and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.31.7.5 255.255.255.252",
"cmd": "ip address 192.31.7.5 255.255.255.252",
"desc": "Assigns an IP address and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface serial 0/0/0",
"cmd": "interface serial 0/0/0",
"desc": "Gateway Routing Protocol"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 198.133.219.0 0.0.0.255",
"cmd": "network 198.133.219.0 0.0.0.255",
"desc": "Advertises directly connected"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 192.31.7.0 0.0.0.255",
"cmd": "network 192.31.7.0 0.0.0.255",
"desc": "Returns to privileged EXEC"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "hostname CORP",
"cmd": "hostname CORP",
"desc": "Sets the locally significant interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "hostname L2Switch2",
"cmd": "hostname L2Switch2",
"desc": "Sets the locally significant interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "hostname L3Switch1",
"cmd": "hostname L3Switch1",
"desc": "Sets the locally significant interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "hostname L2Switch1",
"cmd": "hostname L2Switch1",
"desc": "Sets the locally significant interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.31.7.6 255.255.255.252",
"cmd": "ip address 192.31.7.6 255.255.255.252",
"desc": "Creates a virtual subinterface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 172.31.1.5 255.255.255.252",
"cmd": "ip address 172.31.1.5 255.255.255.252",
"desc": "Creates a virtual subinterface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "encapsulation dot1q 20",
"cmd": "encapsulation dot1q 20",
"desc": "Creates a virtual subinterface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "encapsulation dot1q 30",
"cmd": "encapsulation dot1q 30",
"desc": "Creates a virtual subinterface and"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Management VLAN 1 - Native VLAN",
"cmd": "description Management VLAN 1 - Native VLAN",
"desc": "This subinterface uses the 802.1q"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Sales VLAN 10",
"cmd": "description Sales VLAN 10",
"desc": "This subinterface uses the 802.1q"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Engineering VLAN 20",
"cmd": "description Engineering VLAN 20",
"desc": "This subinterface uses the 802.1q"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "description Marketing VLAN 30",
"cmd": "description Marketing VLAN 30",
"desc": "This subinterface uses the 802.1q"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.168.10.1",
"cmd": "ip address 192.168.10.1",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.168.20.1 255.255.255.0",
"cmd": "ip address 192.168.20.1 255.255.255.0",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface fastethernet 0/0.20",
"cmd": "interface fastethernet 0/0.20",
"desc": "Creates EIGRP routing process 10 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface fastethernet 0/0.30",
"cmd": "interface fastethernet 0/0.30",
"desc": "Creates EIGRP routing process 10 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 192.168.1.0 0.0.0.255",
"cmd": "network 192.168.1.0 0.0.0.255",
"desc": "Advertises the 192.168.1.0 network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 172.16.0.0 0.0.255.255",
"cmd": "network 172.16.0.0 0.0.255.255",
"desc": "Advertises the 192.168.1.0 network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 192.168.10.0 0.0.0.255",
"cmd": "network 192.168.10.0 0.0.0.255",
"desc": "Advertises the 192.168.10.0 network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 192.168.20.0 0.0.0.255",
"cmd": "network 192.168.20.0 0.0.0.255",
"desc": "Advertises the 192.168.20.0 network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 192.168.30.0 0.0.0.255",
"cmd": "network 192.168.30.0 0.0.0.255",
"desc": "Advertises the 192.168.30.0 network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 172.31.0.0 0.0.255.255",
"cmd": "network 172.31.0.0 0.0.255.255",
"desc": "Advertises the 172.31.0.0 network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 192.31.7.0",
"cmd": "network 192.31.7.0",
"desc": "Returns to privileged EXEC mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "name Sales",
"cmd": "name Sales",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/2 4",
"cmd": "interface range fastethernet 0/2 4",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip default-gateway 192.168.1.1",
"cmd": "ip default-gateway 192.168.1.1",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet 1/0/24",
"cmd": "interface gigabitethernet 1/0/24",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip default-gateway 172.16.1.1",
"cmd": "ip default-gateway 172.16.1.1",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 route ::/0 2001:db8:0:1::1",
"cmd": "ipv6 route ::/0 2001:db8:0:1::1",
"desc": "Creates VLAN 20 and enters VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/5 8",
"cmd": "interface range fastethernet 0/5 8",
"desc": "Creates a virtual interface for VLAN 1 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/9 12",
"cmd": "interface range fastethernet 0/9 12",
"desc": "Creates a virtual interface for VLAN 1 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/5 - 8",
"cmd": "interface range fastethernet 0/5 - 8",
"desc": "Creates a virtual interface for VLAN 1 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 192.168.1.2 255.255.255.0",
"cmd": "ip address 192.168.1.2 255.255.255.0",
"desc": "Turns off DNS queries so that spelling"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 172.16.1.2 255.255.255.0",
"cmd": "ip address 172.16.1.2 255.255.255.0",
"desc": "Turns off DNS queries so that spelling"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip address 172.31.1.6 255.255.255.252",
"cmd": "ip address 172.31.1.6 255.255.255.252",
"desc": "Configures the VTP domain name to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/1 - 4",
"cmd": "interface range fastethernet 0/1 - 4",
"desc": "Sets the hostname"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 unicast-routing",
"cmd": "ipv6 unicast-routing",
"desc": "Enables IPv6 routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface loopback 0",
"cmd": "interface loopback 0",
"desc": "Enters interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:a::1/64",
"cmd": "ipv6 address 2001:db8:0:a::1/64",
"desc": "DCE cable is plugged into this interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:8::1/64",
"cmd": "ipv6 address 2001:db8:0:8::1/64",
"desc": "Exits into global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 route ::/0 serial 0/0/0",
"cmd": "ipv6 route ::/0 serial 0/0/0",
"desc": "Enables global IPv6 forwarding"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 router ospf 1",
"cmd": "ipv6 router ospf 1",
"desc": "Exits to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet 0/0.1",
"cmd": "interface gigabitethernet 0/0.1",
"desc": "Assigns 802.1Q as the trunking"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 route ::/0 2001:db8:0:2::1",
"cmd": "ipv6 route ::/0 2001:db8:0:2::1",
"desc": "Assigns 802.1Q as the trunking"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:2::1/64",
"cmd": "ipv6 address 2001:db8:0:2::1/64",
"desc": "Assigns an IPv6 address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:30::1/64",
"cmd": "ipv6 address 2001:db8:0:30::1/64",
"desc": "Assigns an IPv6 address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:40::1/64",
"cmd": "ipv6 address 2001:db8:0:40::1/64",
"desc": "Assigns an IPv6 address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:50::1/64",
"cmd": "ipv6 address 2001:db8:0:50::1/64",
"desc": "Assigns an IPv6 address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 ospf 1 area 0",
"cmd": "ipv6 ospf 1 area 0",
"desc": "Specifies this as an interface that will"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet 0/0.30",
"cmd": "interface gigabitethernet 0/0.30",
"desc": "Enters subinterface programming"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet 0/0.40",
"cmd": "interface gigabitethernet 0/0.40",
"desc": "Enters subinterface programming"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet 0/0.50",
"cmd": "interface gigabitethernet 0/0.50",
"desc": "Enters subinterface programming"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface gigabitethernet 0/0",
"cmd": "interface gigabitethernet 0/0",
"desc": "Enters subinterface programming"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "encapsulation dot1q 40",
"cmd": "encapsulation dot1q 40",
"desc": "Enters interface programming mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "encapsulation dot1q 50",
"cmd": "encapsulation dot1q 50",
"desc": "Enters interface programming mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:7::2/64",
"cmd": "ipv6 address 2001:db8:0:7::2/64",
"desc": "Exits to global configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:8::2/64",
"cmd": "ipv6 address 2001:db8:0:8::2/64",
"desc": "Exits to global configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 route",
"cmd": "ipv6 route",
"desc": "ROUTER: ROUTER-ON-A-STICK"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 30,40,50",
"cmd": "vlan 30,40,50",
"desc": "Exits VLAN configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface fastethernet 0/5",
"cmd": "interface fastethernet 0/5",
"desc": "Sets this port to trunk unconditionally"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/12 14",
"cmd": "interface range fastethernet 0/12 14",
"desc": "Sets these ports to be access ports"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport access vlan 50",
"cmd": "switchport access vlan 50",
"desc": "Assigns these ports to VLAN 30"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/15 18",
"cmd": "interface range fastethernet 0/15 18",
"desc": "Assigns these ports to VLAN 20"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/19 22",
"cmd": "interface range fastethernet 0/19 22",
"desc": "Assigns these ports to VLAN 50"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan1",
"cmd": "interface vlan1",
"desc": "Enters interface configuration mode for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:2::/64",
"cmd": "ipv6 address 2001:db8:0:2::/64",
"desc": "Enables IPv6 forwarding"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 10,20",
"cmd": "vlan 10,20",
"desc": "Changes this Layer 2 switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:7::1/64",
"cmd": "ipv6 address 2001:db8:0:7::1/64",
"desc": "Enters interface configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:1::1/64",
"cmd": "ipv6 address 2001:db8:0:1::1/64",
"desc": "Specifies this as an interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:10::1/64",
"cmd": "ipv6 address 2001:db8:0:10::1/64",
"desc": "Specifies this as an interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ipv6 address 2001:db8:0:20::1/64",
"cmd": "ipv6 address 2001:db8:0:20::1/64",
"desc": "Specifies this as an interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan10",
"cmd": "interface vlan10",
"desc": "Assigns these ports to VLAN 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan20",
"cmd": "interface vlan20",
"desc": "Assigns these ports to VLAN 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "interface range fastethernet 0/15 - 18",
"cmd": "interface range fastethernet 0/15 - 18",
"desc": "Enters switchport configuration mode for a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp 100",
"cmd": "router eigrp 100",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 10.0.0. 0",
"cmd": "network 10.0.0. 0",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 10.0.0. 0 0.255.2 55.255",
"cmd": "network 10.0.0. 0 0.255.2 55.255",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp log-",
"cmd": "eigrp log-",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp logneighbo rwarning s 300",
"cmd": "eigrp logneighbo rwarning s 300",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "no router eigrp 100",
"cmd": "no router eigrp 100",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 unicastrouting",
"cmd": "ipv6 unicastrouting",
"desc": "Enables the forwarding of IPv6 unicast datagrams"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethernet 0/0/0",
"cmd": "interface gigabitethernet 0/0/0",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 eigrp 100",
"cmd": "ipv6 eigrp 100",
"desc": "Enables EIGRP for IPv6 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip hello-interval eigrp 100 10",
"cmd": "ip hello-interval eigrp 100 10",
"desc": "Enables EIGRP for IPv6 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 router eigrp 100",
"cmd": "ipv6 router eigrp 100",
"desc": "Creates the EIGRP IPv6 process and enters router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp router-id 10.1.1.1",
"cmd": "eigrp router-id 10.1.1.1",
"desc": "Enables the use of a fixed router ID"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp TEST",
"cmd": "router eigrp TEST",
"desc": "This command defines a single EIGRP instance that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "address-family ipv4 autonomous-system 1",
"cmd": "address-family ipv4 autonomous-system 1",
"desc": "Enables the IPv4 address family and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 172.16.10.0 0.0.0.255",
"cmd": "network 172.16.10.0 0.0.0.255",
"desc": "Enables EIGRP for IPv4 on interfaces in"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 0.0.0.0",
"cmd": "network 0.0.0.0",
"desc": "EIGRP USING NAMED MODE CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "af-interface gigabitethernet 0/0/0",
"cmd": "af-interface gigabitethernet 0/0/0",
"desc": "Creates a named EIGRP virtual instance"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub summary",
"cmd": "eigrp stub summary",
"desc": "Creates a named EIGRP virtual instance"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub connected static summary redistributed",
"cmd": "eigrp stub connected static summary redistributed",
"desc": "Creates a named EIGRP virtual instance"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "address-family ipv6 autonomous-system 1",
"cmd": "address-family ipv6 autonomous-system 1",
"desc": "All IPv6 enabled interfaces are automatically included"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "address-family ipv4 autonomous- system 1",
"cmd": "address-family ipv4 autonomous- system 1",
"desc": "All IPv6 enabled interfaces are automatically included"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "af-interface default",
"cmd": "af-interface default",
"desc": "Configures all IPv6 interfaces as passive"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "no passive- interface",
"cmd": "no passive- interface",
"desc": "The eigrp upgrade-cli command allows you to upgrade from"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp upgrade-cli TEST",
"cmd": "eigrp upgrade-cli TEST",
"desc": "Configuring Authentication in Classic Mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "key chain romeo",
"cmd": "key chain romeo",
"desc": "Identifies a key chain. The"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "key 1",
"cmd": "key 1",
"desc": "The string can contain from 1 to 80"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip authentication mode eigrp 100 md5",
"cmd": "ip authentication mode eigrp 100 md5",
"desc": "EIGRP packets over the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip authentication key-chain eigrp",
"cmd": "ip authentication key-chain eigrp",
"desc": "Identifies a key chain"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "authentication mode md5",
"cmd": "authentication mode md5",
"desc": "Enables message digest 5 (MD5)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "authentication mode hmac-sha-256 0 password1",
"cmd": "authentication mode hmac-sha-256 0 password1",
"desc": "Enables message digest 5 (MD5)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "authentication mode hmac-sha-256",
"cmd": "authentication mode hmac-sha-256",
"desc": "Exits from address family interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "exit-address-family",
"cmd": "exit-address-family",
"desc": "Identifies the key string"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp neighbor",
"cmd": "show ip eigrp neighbor",
"desc": "Displays EIGRP neighbor table. Incorrect"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp neighbor",
"cmd": "show ipv6 eigrp neighbor",
"desc": "Displays EIGRP IPv6 neighbor table. Incorrect"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show key chain",
"cmd": "show key chain",
"desc": "Displays key chains created on the router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug eigrp packet",
"cmd": "debug eigrp packet",
"desc": "Cisco IOS Software Release 15 and later. Earlier software generally"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "no auto-summary",
"cmd": "no auto-summary",
"desc": "Enters interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip summary-address",
"cmd": "ip summary-address",
"desc": "The administrative-distance argument is optional in this"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip address 192.168.100.1 255.255.255.0",
"cmd": "ip address 192.168.100.1 255.255.255.0",
"desc": "The administrative-distance argument is optional in this"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "bandwidth 256",
"cmd": "bandwidth 256",
"desc": "The administrative-distance argument is optional in this"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 summary-address eigrp 100 2001:db8:0:1::/64",
"cmd": "ipv6 summary-address eigrp 100 2001:db8:0:1::/64",
"desc": "This command behaves similarly"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "interface serial 0/1/0",
"cmd": "interface serial 0/1/0",
"desc": "Configures the EIGRP hello time"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip hold-time eigrp 100 30",
"cmd": "ip hold-time eigrp 100 30",
"desc": "Hold time should be set to three times the hello"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 hello-interval eigrp 100 10",
"cmd": "ipv6 hello-interval eigrp 100 10",
"desc": "EIGRP for IPv6 process 100 to be 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 hold-time eigrp 100 30",
"cmd": "ipv6 hold-time eigrp 100 30",
"desc": "TIMERS FOR EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp 110",
"cmd": "router eigrp 110",
"desc": "Starts the EIGRP routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 10.0.0.0 0.0.0.255",
"cmd": "network 10.0.0.0 0.0.0.255",
"desc": "EIGRP routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 10.0.0.0",
"cmd": "network 10.0.0.0",
"desc": "EIGRP routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "passive-interface gigabitethernet 0/0/0",
"cmd": "passive-interface gigabitethernet 0/0/0",
"desc": "Prevents the sending of hello packets out"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "passive-interface default",
"cmd": "passive-interface default",
"desc": "Enables hello packets to be sent out"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "no passive-interface serial 0/1/0",
"cmd": "no passive-interface serial 0/1/0",
"desc": "Enables hello packets to be sent out"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 router eigrp 110",
"cmd": "ipv6 router eigrp 110",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "access-list 5 deny any",
"cmd": "access-list 5 deny any",
"desc": "Matches and drops packets from any source. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip route 0.0.0.0 0.0.0.0 192.168.100.5",
"cmd": "ip route 0.0.0.0 0.0.0.0 192.168.100.5",
"desc": "Matches and drops packets from any source. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip route 0.0.0.0 0.0.0.0 serial 0/1/0",
"cmd": "ip route 0.0.0.0 0.0.0.0 serial 0/1/0",
"desc": "Creates EIGRP routing process 100"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute static",
"cmd": "redistribute static",
"desc": "Enters the IPv4 address family for AS 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 192.168.100.0 0.0.0.255",
"cmd": "network 192.168.100.0 0.0.0.255",
"desc": "Enters the IPv4 address family for AS 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 192.168.100.0",
"cmd": "network 192.168.100.0",
"desc": "Enters the IPv4 address family for AS 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "topology base",
"cmd": "topology base",
"desc": "Creates a static default route to send all traffic"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip default-network 192.168.100.0",
"cmd": "ip default-network 192.168.100.0",
"desc": "Assigns the IP address and subnet mask to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip summaryaddress eigrp 100 0.0.0.0 0.0.0.0 75",
"cmd": "ip summaryaddress eigrp 100 0.0.0.0 0.0.0.0 75",
"desc": "PASSIVE INTERFACES FOR EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip bandwidthpercent eigrp 50",
"cmd": "ip bandwidthpercent eigrp 50",
"desc": "Configures the percentage of bandwidth that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ipv6 bandwidthpercent eigrp 100 75",
"cmd": "ipv6 bandwidthpercent eigrp 100 75",
"desc": "IPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp",
"cmd": "router eigrp",
"desc": "Creates routing process 100"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub",
"cmd": "eigrp stub",
"desc": "Only the stub router needs to have the eigrp stub command enabled"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub connected",
"cmd": "eigrp stub connected",
"desc": "The connected option is enabled by default"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub static",
"cmd": "eigrp stub static",
"desc": "The summary option is enabled by default"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub receiveonly",
"cmd": "eigrp stub receiveonly",
"desc": "Restricts the router from sharing any of its routes"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "eigrp stub redistributed",
"cmd": "eigrp stub redistributed",
"desc": "Changes the default K-values used"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp CISCO",
"cmd": "router eigrp CISCO",
"desc": "Enters router configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "address-family ipv4 unicast autonomous-system 100",
"cmd": "address-family ipv4 unicast autonomous-system 100",
"desc": "STUB ROUTING FOR EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "clear ip route *",
"cmd": "clear ip route *",
"desc": "Deletes all routes from the IPv4 routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "clear ip route 172.16.10.0",
"cmd": "clear ip route 172.16.10.0",
"desc": "Clears this specific route from the IPv4"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "clear ipv6 route *",
"cmd": "clear ipv6 route *",
"desc": "CPU utilization rates as the routing table is rebuilt"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "clear ipv6 route 2001:db8:c18:3::/64",
"cmd": "clear ipv6 route 2001:db8:c18:3::/64",
"desc": "Clears this specific route from the IPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "clear ipv6 traffic",
"cmd": "clear ipv6 traffic",
"desc": "Resets IPv6 traffic counters"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp neighbors",
"cmd": "show ip eigrp neighbors",
"desc": "Displays the neighbor table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp neighbors detail",
"cmd": "show ip eigrp neighbors detail",
"desc": "The show ip eigrp neighbors detail command will verify"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp interfaces",
"cmd": "show ip eigrp interfaces",
"desc": "Shows info for each interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp interfaces detail",
"cmd": "show ip eigrp interfaces detail",
"desc": "Shows more detailed information for each"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp interface serial 0/0/0",
"cmd": "show ip eigrp interface serial 0/0/0",
"desc": "Shows info for a specific interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp interface 100",
"cmd": "show ip eigrp interface 100",
"desc": "Shows info for interfaces running process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp topology",
"cmd": "show ip eigrp topology",
"desc": "The show ip eigrp topology command shows where"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp topology all-links",
"cmd": "show ip eigrp topology all-links",
"desc": "Displays all entries in the EIGRP topology"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip eigrp traffic",
"cmd": "show ip eigrp traffic",
"desc": "Shows the number and type of packets"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip",
"cmd": "show ip",
"desc": "Displays the status of interfaces"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip interface brief",
"cmd": "show ip interface brief",
"desc": "Displays a summarized status of interfaces"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 interface brief",
"cmd": "show ipv6 interface brief",
"desc": "Displays a summarized status of interfaces"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip protocols",
"cmd": "show ip protocols",
"desc": "Shows the parameters and current state of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 neighbors",
"cmd": "show ipv6 neighbors",
"desc": "Shows the parameters and current state of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip route",
"cmd": "show ip route",
"desc": "Shows the complete routing table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ip route eigrp",
"cmd": "show ip route eigrp",
"desc": "Shows a routing table with only EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp interfaces",
"cmd": "show ipv6 eigrp interfaces",
"desc": "Displays IPv6 info for each interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp interface serial 0/0/0",
"cmd": "show ipv6 eigrp interface serial 0/0/0",
"desc": "Displays IPv6 info for specific interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp interface 100",
"cmd": "show ipv6 eigrp interface 100",
"desc": "Displays IPv6 info for interfaces running"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp neighbors",
"cmd": "show ipv6 eigrp neighbors",
"desc": "Displays the EIGRP IPv6 neighbor table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp neighbors detail",
"cmd": "show ipv6 eigrp neighbors detail",
"desc": "Displays a detailed EIGRP IPv6 neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 eigrp topology",
"cmd": "show ipv6 eigrp topology",
"desc": "Displays the EIGRP IPv6 topology table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 interface",
"cmd": "show ipv6 interface",
"desc": "Displays IPv6 neighbor discovery cache"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 protocols",
"cmd": "show ipv6 protocols",
"desc": "Displays the parameters and current state"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 route",
"cmd": "show ipv6 route",
"desc": "Displays the current IPv6 routing table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 route eigrp",
"cmd": "show ipv6 route eigrp",
"desc": "IPv6 routing table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 route summary",
"cmd": "show ipv6 route summary",
"desc": "IPv6 routing table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 routers",
"cmd": "show ipv6 routers",
"desc": "Displays IPv6 router advertisement"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "show ipv6 traffic",
"cmd": "show ipv6 traffic",
"desc": "VERIFYING EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug eigrp fsm",
"cmd": "debug eigrp fsm",
"desc": "TROUBLESHOOTING EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug eigrp packets",
"cmd": "debug eigrp packets",
"desc": "Displays events/actions related to EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug eigrp neighbors",
"cmd": "debug eigrp neighbors",
"desc": "EIGRP neighbors"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ip eigrp notifications",
"cmd": "debug ip eigrp notifications",
"desc": "EIGRP neighbors"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ip eigrp",
"cmd": "debug ip eigrp",
"desc": "Displays EIGRP event notifications"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ipv6 eigrp",
"cmd": "debug ipv6 eigrp",
"desc": "IPv6 protocol"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ipv6 neighbor 2001:db8:c18:3::1",
"cmd": "debug ipv6 neighbor 2001:db8:c18:3::1",
"desc": "EIGRP for IPv6 neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ipv6 neighbor notification",
"cmd": "debug ipv6 neighbor notification",
"desc": "Displays EIGRP for IPv6 events and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ipv6 neighbor summary",
"cmd": "debug ipv6 neighbor summary",
"desc": "Displays a summary of EIGRP for IPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ipv6 packet",
"cmd": "debug ipv6 packet",
"desc": "Send your debug output to a syslog server to ensure that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "debug ipv6 routing",
"cmd": "debug ipv6 routing",
"desc": "TROUBLESHOOTING EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp ConfigEG",
"cmd": "router eigrp ConfigEG",
"desc": "EIGRP autonomous system 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 192.168.0.0",
"cmd": "network 192.168.0.0",
"desc": "Enables EIGRP for IPv4 on interfaces in the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 192.168.1.0",
"cmd": "network 192.168.1.0",
"desc": "Enables EIGRP for IPv4 on interfaces in the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "network 192.168.0.0 0.0.0.255",
"cmd": "network 192.168.0.0 0.0.0.255",
"desc": "Moves the router into address-family"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "af-interface gigabitethernet 0/0",
"cmd": "af-interface gigabitethernet 0/0",
"desc": "Moves the router into address-family"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "address-family ipv6 autonomous- system 1",
"cmd": "address-family ipv6 autonomous- system 1",
"desc": "Returns to privileged EXEC mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "address-family ipv6",
"cmd": "address-family ipv6",
"desc": "Returns to privileged EXEC mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "copy runningconfig startupconfig",
"cmd": "copy runningconfig startupconfig",
"desc": "IPV6 USING NAMED MODE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "copy running-",
"cmd": "copy running-",
"desc": "IPV6 USING NAMED MODE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "router ospf 1",
"cmd": "router ospf 1",
"desc": "Starts OSPF process 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.10.0 0.0.0.255 area 0",
"cmd": "network 172.16.10.0 0.0.0.255 area 0",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 10.10.10.1 0.0.0.0 area 51",
"cmd": "network 10.10.10.1 0.0.0.0 area 51",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 0 authentication",
"cmd": "area 0 authentication",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 range 192.168.64.0",
"cmd": "area 1 range 192.168.64.0",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.20.0 0.0.0.255 area 51",
"cmd": "network 172.16.20.0 0.0.0.255 area 51",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 51 stub",
"cmd": "area 51 stub",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 51 stub no-summary",
"cmd": "area 51 stub no-summary",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.20.0 0.0.0.255 area 1",
"cmd": "network 172.16.20.0 0.0.0.255 area 1",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.20.0 0.0.0.255 area 11",
"cmd": "network 172.16.20.0 0.0.0.255 area 11",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 11 nssa nosummary",
"cmd": "area 11 nssa nosummary",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 11 nssa",
"cmd": "area 11 nssa",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.20.0 0.0.0.255 area 0",
"cmd": "network 172.16.20.0 0.0.0.255 area 0",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network",
"cmd": "network",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf 1 area 0",
"cmd": "ip ospf 1 area 0",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf 1 area 51",
"cmd": "ip ospf 1 area 51",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf authentication",
"cmd": "ip ospf authentication",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf authentication message-digest",
"cmd": "ip ospf authentication message-digest",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip mtu 1400",
"cmd": "ip mtu 1400",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:1::3 /64",
"cmd": "ipv6 address 2001:db8:0:1::3 /64",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:2::1 /64",
"cmd": "ipv6 address 2001:db8:0:2::1 /64",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:1::2 /64",
"cmd": "ipv6 address 2001:db8:0:1::2 /64",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:3::1 /64",
"cmd": "ipv6 address 2001:db8:0:3::1 /64",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:1::1 /64",
"cmd": "ipv6 address 2001:db8:0:1::1 /64",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:7::1",
"cmd": "ipv6 address 2001:db8:0:7::1",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:7::2 /64",
"cmd": "ipv6 address 2001:db8:0:7::2 /64",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 192.168.2.1 255.255.255.0",
"cmd": "ip address 192.168.2.1 255.255.255.0",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 192.168.3.1 255.255.255.0",
"cmd": "ip address 192.168.3.1 255.255.255.0",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 172.16.1.3 255.255.255.0",
"cmd": "ip address 172.16.1.3 255.255.255.0",
"desc": "Because this command is configured directly on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.10.1 0.0.0.0 area 0",
"cmd": "network 172.16.10.1 0.0.0.0 area 0",
"desc": "CONFIGURING MULTIAREA OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.0.0 0.0.255.255 area 0",
"cmd": "network 172.16.0.0 0.0.255.255 area 0",
"desc": "CONFIGURING MULTIAREA OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 0.0.0.0 255.255.255.255 area 0",
"cmd": "network 0.0.0.0 255.255.255.255 area 0",
"desc": "CONFIGURING MULTIAREA OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 router ospf",
"cmd": "ipv6 router ospf",
"desc": "Creates the OSPFv3 process if it has not already"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 stub",
"cmd": "area 1 stub",
"desc": "The router is configured to be part of a stub area"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 range 2001:db8::/48",
"cmd": "area 1 range 2001:db8::/48",
"desc": "The router is configured to be part of a stub area"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 stub no-summary",
"cmd": "area 1 stub no-summary",
"desc": "The router is configured to be in a totally stubby"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 nssa",
"cmd": "area 1 nssa",
"desc": "The router is configured to be in an NSSA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 nssa no summary",
"cmd": "area 1 nssa no summary",
"desc": "Interarea OSPFv3 Route Summarization"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ipv6 ospf 1 process",
"cmd": "clear ipv6 ospf 1 process",
"desc": "Configuring the IPv6 Address Family in OSPFv3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ipv6 ospf 1 force-spf",
"cmd": "clear ipv6 ospf 1 force-spf",
"desc": "Configuring the IPv6 Address Family in OSPFv3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "router ospfv3 1",
"cmd": "router ospfv3 1",
"desc": "Enables OSPFv3 router configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "address-family ipv6 unicast",
"cmd": "address-family ipv6 unicast",
"desc": "Applying Parameters in Address Family Configuration Mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "address-family ipv4 unicast",
"cmd": "address-family ipv4 unicast",
"desc": "Applying Parameters in Address Family Configuration Mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 1 range 2001:db8:0:0::0/56",
"cmd": "area 1 range 2001:db8:0:0::0/56",
"desc": "Resets OSPFv3 area 1 parameters to their"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 0 range 172.16.0.0 255.255.0.0",
"cmd": "area 0 range 172.16.0.0 255.255.0.0",
"desc": "Sets default metric values for IPv4 and IPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf authentication-",
"cmd": "ip ospf authentication-",
"desc": "Starts OSPF process 13"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 0 authentication message-digest",
"cmd": "area 0 authentication message-digest",
"desc": "Provides another way to enable"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf message-digestkey 1 md5 secret",
"cmd": "ip ospf message-digestkey 1 md5 secret",
"desc": "Configuring OSPFv2 Cryptographic Authentication: SHA-256"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "key chain samplechain",
"cmd": "key chain samplechain",
"desc": "Specifies the key chain name and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf authentication keychain samplechain",
"cmd": "ip ospf authentication keychain samplechain",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf",
"cmd": "ip ospf",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf 1 area 1",
"cmd": "ip ospf 1 area 1",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 ospf authentication ipsec spi 500 md5 1234567890abcdef1234567890a",
"cmd": "ipv6 ospf authentication ipsec spi 500 md5 1234567890abcdef1234567890ab cdef",
"desc": "Moves to routing protocol"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "OSPF",
"title": "area 0 authentication ipsec spi sha1 1234567890123456789012345678 9012",
"cmd": "area 0 authentication ipsec spi sha1 1234567890123456789012345678 901234567890",
"desc": "Verifying OSPFv2 and OSPFv3 Authentication"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf neighbor",
"cmd": "show ip ospf neighbor",
"desc": "Displays OSPF neighbor table. Incorrect"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip route ospf",
"cmd": "show ip route ospf",
"desc": "Incorrect authentication configuration will"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ospfv3 neighbor",
"cmd": "show ospfv3 neighbor",
"desc": "Displays the OSPFv3 neighbor table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 route ospf",
"cmd": "show ipv6 route ospf",
"desc": "Displays the OSPFv3 routes in the routing table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf interface gigabitethernet 0/0",
"cmd": "show ip ospf interface gigabitethernet 0/0",
"desc": "Verifies authentication setup on a specific"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show crypto ipsec sa interface gigabitethernet 0/0",
"cmd": "show crypto ipsec sa interface gigabitethernet 0/0",
"desc": "Displays IPsec security associations on a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "debug ip ospf adj",
"cmd": "debug ip ospf adj",
"desc": "Displays information about OSPF adjacencies"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "debug ipv6 ospf adj",
"cmd": "debug ipv6 ospf adj",
"desc": "The following sections are optional but may be required in your"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "no passiveinterface serial 0/0/1",
"cmd": "no passiveinterface serial 0/0/1",
"desc": "CONFIGURING TRADITIONAL OSPFV3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "ip route 0.0.0.0 0.0.0.0 serial 0/0/0",
"cmd": "ip route 0.0.0.0 0.0.0.0 serial 0/0/0",
"desc": "Summarizes area 1 routes to the specified"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 1 range 192.168.64.0 255.255.224.0",
"cmd": "area 1 range 192.168.64.0 255.255.224.0",
"desc": "Using the filter-list Command"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 1 range 2001:db8:0:10::/60",
"cmd": "area 1 range 2001:db8:0:10::/60",
"desc": "Using the filter-list Command"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "ip prefixlist MyPFList permit 172.16.0.0/16 le 32",
"cmd": "ip prefixlist MyPFList permit 172.16.0.0/16 le 32",
"desc": "Defines a prefix list called MyPFList"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "router ospf 202",
"cmd": "router ospf 202",
"desc": "Uses a prefix list called MyPFList to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 1 filter-list prefix MyPFList in",
"cmd": "area 1 filter-list prefix MyPFList in",
"desc": "Enters OSPF process 202"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 1 range 10.1.1.0 255.255.255.0 not-advertise",
"cmd": "area 1 range 10.1.1.0 255.255.255.0 not-advertise",
"desc": "Using the distribute-list in Command"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 1 permit 192.168.1.0 0.0.0.255",
"cmd": "access-list 1 permit 192.168.1.0 0.0.0.255",
"desc": "Defines area 51 as a stub area"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 51 default-cost 10",
"cmd": "area 51 default-cost 10",
"desc": "Sets the router ID to 10.0.0.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "network 192.168.0.0 0.0.0.255 area 51",
"cmd": "network 192.168.0.0 0.0.0.255 area 51",
"desc": "Sets the router ID to 10.0.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "network 192.168.1.0 0.0.0.255 area 3",
"cmd": "network 192.168.1.0 0.0.0.255 area 3",
"desc": "Sets the router ID to 10.0.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 3 virtual-link 10.0.0.1",
"cmd": "area 3 virtual-link 10.0.0.1",
"desc": "Sets the router ID to 10.0.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "network 192.168.2.0 0.0.0.255 area 0",
"cmd": "network 192.168.2.0 0.0.0.255 area 0",
"desc": "PROPAGATING A DEFAULT ROUTE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "area 3 virtual-link 10.0.0.2",
"cmd": "area 3 virtual-link 10.0.0.2",
"desc": "PROPAGATING A DEFAULT ROUTE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip route ospfv3",
"cmd": "show ip route ospfv3",
"desc": "Displays the OSPFv3 routes in the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf",
"cmd": "show ip ospf",
"desc": "Displays basic information about OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf border-routers",
"cmd": "show ip ospf border-routers",
"desc": "Displays border and boundary router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf database",
"cmd": "show ip ospf database",
"desc": "Displays the contents of the OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf database asbr-summary",
"cmd": "show ip ospf database asbr-summary",
"desc": "Displays Type-4 LSAs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf database external",
"cmd": "show ip ospf database external",
"desc": "Displays Type-5 LSAs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf database nssa-external",
"cmd": "show ip ospf database nssa-external",
"desc": "Displays network LSAs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf database router selforiginate",
"cmd": "show ip ospf database router selforiginate",
"desc": "Displays locally generated LSAs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf database summary",
"cmd": "show ip ospf database summary",
"desc": "Lists all OSPF neighbors and their"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf neighbor detail",
"cmd": "show ip ospf neighbor detail",
"desc": "Displays a detailed list of neighbors"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf",
"cmd": "show ipv6 ospf",
"desc": "OSPFv3 routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf border-routers",
"cmd": "show ipv6 ospf border-routers",
"desc": "Displays the internal OSPF routing table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf database",
"cmd": "show ipv6 ospf database",
"desc": "Displays OSPFv3-related database"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf database databasesummary",
"cmd": "show ipv6 ospf database databasesummary",
"desc": "Displays how many of each type of LSA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf interface",
"cmd": "show ipv6 ospf interface",
"desc": "Displays OSPFv3-related interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf neighbor",
"cmd": "show ipv6 ospf neighbor",
"desc": "Displays OSPFv3-related neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ipv6 ospf virtual-links",
"cmd": "show ipv6 ospf virtual-links",
"desc": "Displays parameters and the current"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ip ospf virtual-links",
"cmd": "show ip ospf virtual-links",
"desc": "Displays information about virtual links"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "show ospfv3 database",
"cmd": "show ospfv3 database",
"desc": "VERIFYING OSPF CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ip route a.b.c.d",
"cmd": "clear ip route a.b.c.d",
"desc": "Clears a specific route to network a.b.c.d"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ip ospf counters",
"cmd": "clear ip ospf counters",
"desc": "Resets OSPF counters"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ip ospf process",
"cmd": "clear ip ospf process",
"desc": "Displays all OSPF events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ip ospf 13 process",
"cmd": "clear ip ospf 13 process",
"desc": "Displays all OSPF events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ipv6 ospf process",
"cmd": "clear ipv6 ospf process",
"desc": "Displays all OSPF events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "clear ipv6 ospf 13 process",
"cmd": "clear ipv6 ospf 13 process",
"desc": "Displays all OSPF events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "debug ip ospf events",
"cmd": "debug ip ospf events",
"desc": "Displays all OSPF events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "debug ip ospf adjacency",
"cmd": "debug ip ospf adjacency",
"desc": "Displays various OSPF states and DR/BDR"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "debug ipv6 ospf adjacency",
"cmd": "debug ipv6 ospf adjacency",
"desc": "Displays debug messages about the OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "debug ip ospf packet",
"cmd": "debug ip ospf packet",
"desc": "Displays information about each OSPF packet"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "copy runningconfig startup-",
"cmd": "copy runningconfig startup-",
"desc": "Enables OSPF area 0 on this interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "interface serial 0/0/1",
"cmd": "interface serial 0/0/1",
"desc": "This is the most precise way to place an"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "network 172.16.50.1 0.0.0.0 area 0",
"cmd": "network 172.16.50.1 0.0.0.0 area 0",
"desc": "ASBR Router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 192.168.1.1 255.255.255.2 55",
"cmd": "ip address 192.168.1.1 255.255.255.2 55",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 192.168.2.1 255.255.255.255",
"cmd": "ip address 192.168.2.1 255.255.255.255",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 192.168.3.1 255.255.255.255",
"cmd": "ip address 192.168.3.1 255.255.255.255",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip address 192.168.4.1 255.255.255.255",
"cmd": "ip address 192.168.4.1 255.255.255.255",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "description Router ID",
"cmd": "description Router ID",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:1::1/ 64",
"cmd": "ipv6 address 2001:db8:0:1::1/ 64",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:1:1::1/ 64",
"cmd": "ipv6 address 2001:db8:1:1::1/ 64",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:2::1/ 64",
"cmd": "ipv6 address 2001:db8:0:2::1/ 64",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:1:1::2/ 64",
"cmd": "ipv6 address 2001:db8:1:1::2/ 64",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:0:3::1/ 64",
"cmd": "ipv6 address 2001:db8:0:3::1/ 64",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 address 2001:db8:1:1::3/ 64",
"cmd": "ipv6 address 2001:db8:1:1::3/ 64",
"desc": "Creates default route. Using both an exit interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip route 11.0.0.0 255.0.0.0 null0",
"cmd": "ip route 11.0.0.0 255.0.0.0 null0",
"desc": "Creates a static route to a null interface. In this"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip route 12.0.0.0 255.0.0.0 null0",
"cmd": "ip route 12.0.0.0 255.0.0.0 null0",
"desc": "Sets the default route to be propagated to all OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip route 13.0.0.0 255.0.0.0 null0",
"cmd": "ip route 13.0.0.0 255.0.0.0 null0",
"desc": "Sets the default route to be propagated to all OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "interface gigabitethern et 1/0",
"cmd": "interface gigabitethern et 1/0",
"desc": "Sets the default route to be propagated to all OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "hostname ABR-1",
"cmd": "hostname ABR-1",
"desc": "Enables OSPF on this interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "hostname ABR-2",
"cmd": "hostname ABR-2",
"desc": "Enables OSPF on this interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf priority 200",
"cmd": "ip ospf priority 200",
"desc": "Places this interface into OSPF area 0 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ip ospf priority 100",
"cmd": "ip ospf priority 100",
"desc": "Moves to global configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "hostname Internal",
"cmd": "hostname Internal",
"desc": "Configures a global IPv6 address on the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 ospf 1 area 1",
"cmd": "ipv6 ospf 1 area 1",
"desc": "Enables OSPFv3 on the interface and places this"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "ipv6 router",
"cmd": "ipv6 router",
"desc": "TROUBLESHOOTING OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "address-family",
"cmd": "address-family",
"desc": "TROUBLESHOOTING OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "network 172.16.0.0",
"cmd": "network 172.16.0.0",
"desc": "DEFINING SEED AND DEFAULT METRICS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "distance eigrp 80 105",
"cmd": "distance eigrp 80 105",
"desc": "DEFINING SEED AND DEFAULT METRICS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute ospf 1",
"cmd": "redistribute ospf 1",
"desc": "The metrics assigned to these learned routes"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute ospf 1 metric 1000 100 255 1 1500",
"cmd": "redistribute ospf 1 metric 1000 100 255 1 1500",
"desc": "Starts the OSPF routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute connected",
"cmd": "redistribute connected",
"desc": "The connected keyword refers to routes that are established"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 10 metric 100 subnets",
"cmd": "redistribute eigrp 10 metric 100 subnets",
"desc": "The connected keyword refers to routes that are established"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "distance ospf intra-area 105 inter-area 105 external",
"cmd": "distance ospf intra-area 105 inter-area 105 external",
"desc": "The connected keyword refers to routes that are established"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute connected metric 50",
"cmd": "redistribute connected metric 50",
"desc": "EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip route 10.1.1.0 255.255.255.0 serial 0/0/0",
"cmd": "ip route 10.1.1.0 255.255.255.0 serial 0/0/0",
"desc": "Serial 0/0/0"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "redistribute ospf 1 match internal external 1",
"cmd": "redistribute ospf 1 match internal external 1",
"desc": "REDISTRIBUTING SUBNETS INTO OSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp DEMO",
"cmd": "router eigrp DEMO",
"desc": "REDISTRIBUTION FOR IPV6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "redistribute ospf 1 metric 1500 10 255",
"cmd": "redistribute ospf 1 metric 1500 10 255",
"desc": "The include-connected keywords instruct the source routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 10 includeconnected",
"cmd": "redistribute eigrp 10 includeconnected",
"desc": "Redistributes IPv6 routes from EIGRP AS 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 10 metric-type 1 include-connected",
"cmd": "redistribute eigrp 10 metric-type 1 include-connected",
"desc": "AS 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ip rip database",
"cmd": "show ip rip database",
"desc": "Displays summary address entries in the RIP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ipv6 rip database",
"cmd": "show ipv6 rip database",
"desc": "Displays the link-state advertisement (LSA)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 10 deny 10.0.0.0 0.255.255.255",
"cmd": "access-list 10 deny 10.0.0.0 0.255.255.255",
"desc": "Creates a standard ACL number 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 10 permit any",
"cmd": "access-list 10 permit any",
"desc": "Adds a second line to ACL 10 which"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp 1",
"cmd": "router eigrp 1",
"desc": "Adds a second line to ACL 20 which"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "router",
"cmd": "router",
"desc": "Distribute Lists"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 30 permit 172.16.1.0 0.0.0.255",
"cmd": "access-list 30 permit 172.16.1.0 0.0.0.255",
"desc": "Creates a standard ACL number 30 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 30 permit 172.16.2.0 0.0.0.255",
"cmd": "access-list 30 permit 172.16.2.0 0.0.0.255",
"desc": "Enters the OSPFv3 IPv4 address family"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 10",
"cmd": "redistribute eigrp 10",
"desc": "The following examples show how you can use the prefix-list"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip prefixlist ROSE permit 192.0.0.0/8 le 24",
"cmd": "ip prefixlist ROSE permit 192.0.0.0/8 le 24",
"desc": "Prefix List to Control Redistribution"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip prefix-list FILTER seq 5 permit 172.16.1.0/24",
"cmd": "ip prefix-list FILTER seq 5 permit 172.16.1.0/24",
"desc": "Creates a prefix list called FILTER with a first"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip prefix-list FILTER seq 10 permit 172.16.2.0/24",
"cmd": "ip prefix-list FILTER seq 10 permit 172.16.2.0/24",
"desc": "Enters OSPF process ID 1 routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 10 subnets",
"cmd": "redistribute eigrp 10 subnets",
"desc": "VERIFYING ROUTE REDISTRIBUTION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 10 subnets route-map FILTER",
"cmd": "redistribute eigrp 10 subnets route-map FILTER",
"desc": "VERIFYING ROUTE REDISTRIBUTION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map MY_MAP permit 10",
"cmd": "route-map MY_MAP permit 10",
"desc": "Specifies the match criteria (the conditions that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match ip",
"cmd": "match ip",
"desc": "Specifies the match criteria (the conditions that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set metric 500",
"cmd": "set metric 500",
"desc": "Specifies the set action (what action is to be"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map MY_MAP permit 30",
"cmd": "route-map MY_MAP permit 30",
"desc": "Specifies the set action (what action is to be"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set ip next-hop 209.165.201.1",
"cmd": "set ip next-hop 209.165.201.1",
"desc": "Specifies the set action (what action is to be"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set metric-type type-1",
"cmd": "set metric-type type-1",
"desc": "Specifies a second set action for the same match"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set metric-type type-2",
"cmd": "set metric-type type-2",
"desc": "Specifies a second set action for the same match"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set interface serial 0/2/0",
"cmd": "set interface serial 0/2/0",
"desc": "Specifies a second set action for the same match"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map PBR permit 20",
"cmd": "route-map PBR permit 20",
"desc": "Specifies a second set action for the same match"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map MY_MAP deny 20",
"cmd": "route-map MY_MAP deny 20",
"desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match ip address prefixlist MY_PFL",
"cmd": "match ip address prefixlist MY_PFL",
"desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "router ospf 10",
"cmd": "router ospf 10",
"desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set metric 5000",
"cmd": "set metric 5000",
"desc": "Enters OSPF process ID 10 routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set ip default nexthop 209.165.201.1",
"cmd": "set ip default nexthop 209.165.201.1",
"desc": "Enters OSPF process ID 10 routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 1 routemap MY_MAP subnets",
"cmd": "redistribute eigrp 1 routemap MY_MAP subnets",
"desc": "The objective is to only redistribute networks 172.16.1.0/24 and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 5 permit 172.16.1.0 0.0.0.255",
"cmd": "access-list 5 permit 172.16.1.0 0.0.0.255",
"desc": "Creates a standard ACL number 5 and explicitly"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 5 permit 172.16.2.0 0.0.0.255",
"cmd": "access-list 5 permit 172.16.2.0 0.0.0.255",
"desc": "Adds a second line to ACL 5 that explicitly"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map FILTER permit 10",
"cmd": "route-map FILTER permit 10",
"desc": "Creates a route map called FILTER. This route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match ip address 5",
"cmd": "match ip address 5",
"desc": "Creates a route map named EIGRPtoOSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set metric 50",
"cmd": "set metric 50",
"desc": "Creates a route map named EIGRPtoOSPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match tag 11",
"cmd": "match tag 11",
"desc": "EIGRPtoOSPF permitting all other routes to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "route-map EIGRPtoOSPF permit 20",
"cmd": "route-map EIGRPtoOSPF permit 20",
"desc": "EIGRPtoOSPF permitting all other routes to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set tag 22",
"cmd": "set tag 22",
"desc": "Creates a route map named OSPFtoEIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "route-map OSPFtoEIGRP deny 10",
"cmd": "route-map OSPFtoEIGRP deny 10",
"desc": "Creates a route map named OSPFtoEIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match tag 22",
"cmd": "match tag 22",
"desc": "OSPFtoEIGRP permitting all other routes to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "route-map OSPFtoEIGRP permit 20",
"cmd": "route-map OSPFtoEIGRP permit 20",
"desc": "OSPFtoEIGRP permitting all other routes to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set tag 11",
"cmd": "set tag 11",
"desc": "Enters OSPF configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "router ospf 11",
"cmd": "router ospf 11",
"desc": "Enters OSPF configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "redistribute eigrp 22 subnets route-map EIGRPtoOSPF",
"cmd": "redistribute eigrp 22 subnets route-map EIGRPtoOSPF",
"desc": "Redistributes all EIGRP routes with a tag of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router eigrp 22",
"cmd": "router eigrp 22",
"desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "router bgp 65001",
"cmd": "router bgp 65001",
"desc": "Starts the BGP routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "distance bgp 30 200 220",
"cmd": "distance bgp 30 200 220",
"desc": "Changes the AD to 30 for external"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "distance 50",
"cmd": "distance 50",
"desc": "Sets an AD of 50 for all routes learned through a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "distance 255",
"cmd": "distance 255",
"desc": "Sets the AD to 85 for all routes learned from"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "distance 125 172.16.200.5 0.0.0.0 10",
"cmd": "distance 125 172.16.200.5 0.0.0.0 10",
"desc": "Path control is the mechanism that changes default packet"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "route-map ISP1 permit 10",
"cmd": "route-map ISP1 permit 10",
"desc": "The sequence-numb er is used to indicate the position the route map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "match ip address 1",
"cmd": "match ip address 1",
"desc": "Defines where to output packets that pass a match"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "set default interface serial 0/2/0",
"cmd": "set default interface serial 0/2/0",
"desc": "This is recommended for point-to-point links only"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip local policy route-map ISP1",
"cmd": "ip local policy route-map ISP1",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "EIGRP",
"title": "ip policy route-map ISP1",
"cmd": "ip policy route-map ISP1",
"desc": "EIGRP routes and to 105 for EIGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ip policy",
"cmd": "show ip policy",
"desc": "Displays route maps that are configured on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "debug ip policy",
"cmd": "debug ip policy",
"desc": "Enables the display of IP policy routing events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "traceroute",
"cmd": "traceroute",
"desc": "The objective is to forward Internet traffic sourced from the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ping",
"cmd": "ping",
"desc": "The objective is to forward Internet traffic sourced from the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "access-list 11 permit 10.1.1.0 0.0.0.255",
"cmd": "access-list 11 permit 10.1.1.0 0.0.0.255",
"desc": "Creates a standard access list that matches traffic"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map PBR permit 10",
"cmd": "route-map PBR permit 10",
"desc": "Creates a route map named PBR. This route map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match ip address 11",
"cmd": "match ip address 11",
"desc": "Adds a second statement to the PBR route map. A"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set ip next-hop 192.168.1.1",
"cmd": "set ip next-hop 192.168.1.1",
"desc": "Adds a second statement to the PBR route map. A"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "match ip address 12",
"cmd": "match ip address 12",
"desc": "Adds a third statement to the PBR route map. A"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set ip next-hop 192.168.2.1",
"cmd": "set ip next-hop 192.168.2.1",
"desc": "Adds a third statement to the PBR route map. A"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set default interface null0",
"cmd": "set default interface null0",
"desc": "Enters GigabitEthernet 0/0/0 interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip policy routemap PBR",
"cmd": "ip policy routemap PBR",
"desc": "Configuring Authentication for IP SLA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "key chain Juliet",
"cmd": "key chain Juliet",
"desc": "Identifies a key chain"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip sla key-chain Juliet",
"cmd": "ip sla key-chain Juliet",
"desc": "Monitoring IP SLA Operations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ip sla application",
"cmd": "show ip sla application",
"desc": "The show ip sla application command displays"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ip sla configuration 11",
"cmd": "show ip sla configuration 11",
"desc": "The use of a number in this command is optional"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ip sla statistics",
"cmd": "show ip sla statistics",
"desc": "Step 1: Define Probe(s)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip sla 1",
"cmd": "ip sla 1",
"desc": "Exits IP SLA ICMP echo configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip sla schedule 1 start-time now life forever",
"cmd": "ip sla schedule 1 start-time now life forever",
"desc": "Step 2: Define Tracking Object(s)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "track 11 ip sla 1 reachability",
"cmd": "track 11 ip sla 1 reachability",
"desc": "Step 3a: Define the Action on the Tracking Object(s)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip route 0.0.0.0 0.0.0.0",
"cmd": "ip route 0.0.0.0 0.0.0.0",
"desc": "Adds a default route with a next hop of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "route-map IPSLA permit 10",
"cmd": "route-map IPSLA permit 10",
"desc": "Creates a route map that will use the tracking"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "set ip next-hop verifyavailability 192.168.1.1 10 track 11",
"cmd": "set ip next-hop verifyavailability 192.168.1.1 10 track 11",
"desc": "Enters interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "ip policy route-map IPSLA",
"cmd": "ip policy route-map IPSLA",
"desc": "Step 4: Verify IP SLA Operations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show ip sla configuration",
"cmd": "show ip sla configuration",
"desc": "Displays the current operational status and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Routing",
"title": "show track",
"cmd": "show track",
"desc": "VERIFYING POLICY-BASED ROUTING"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 100",
"cmd": "router bgp 100",
"desc": "Cisco IOS Software permits only one Border Gateway Protocol (BGP)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.31.7.1 remote-as 200",
"cmd": "neighbor 192.31.7.1 remote-as 200",
"desc": "If the AS number configured in the router bgp command is identical"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 192.135.250.0",
"cmd": "network 192.135.250.0",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 128.107.0.0 mask 255.255.255.0",
"cmd": "network 128.107.0.0 mask 255.255.255.0",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.0.0.44 activate",
"cmd": "neighbor 10.0.0.44 activate",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear ip bgp *",
"cmd": "clear ip bgp *",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp neighbor address advertised",
"cmd": "show ip bgp neighbor address advertised",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp neighbor address received",
"cmd": "show ip bgp neighbor address received",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp neighbor address routes",
"cmd": "show ip bgp neighbor address routes",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.20.1 remote-as 150",
"cmd": "neighbor 172.16.20.1 remote-as 150",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.17.1.1 remote-as 200",
"cmd": "neighbor 172.17.1.1 remote-as 200",
"desc": "CONFIGURING BGP: CLASSIC CONFIGURATION"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 65500",
"cmd": "router bgp 65500",
"desc": "Starts the BGP routing process"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:12::2 remote-as 65501",
"cmd": "neighbor 2001:db8:12::2 remote-as 65501",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:12::1 remote-as 65500",
"cmd": "neighbor 2001:db8:12::1 remote-as 65500",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor",
"cmd": "neighbor",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.20.20.1 remote-as 64511",
"cmd": "neighbor 10.20.20.1 remote-as 64511",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.10.10.1 remote-as 64496",
"cmd": "neighbor 10.10.10.1 remote-as 64496",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.7.1 remoteas 100",
"cmd": "neighbor 192.168.7.1 remoteas 100",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.7.1 routemap SETWEIGHT in",
"cmd": "neighbor 192.168.7.1 routemap SETWEIGHT in",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.17.1.1 remote-as 300",
"cmd": "neighbor 172.17.1.1 remote-as 300",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 192.168.219.0",
"cmd": "network 192.168.219.0",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.2.0.1 remote-as 300",
"cmd": "neighbor 10.2.0.1 remote-as 300",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.4.0.2 remote-as 100",
"cmd": "neighbor 10.4.0.2 remote-as 100",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.2.0.2 remote-as 100",
"cmd": "neighbor 10.2.0.2 remote-as 100",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.3.0.2 remote-as 100",
"cmd": "neighbor 10.3.0.2 remote-as 100",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.100.1 remote-as 200",
"cmd": "neighbor 192.168.100.1 remote-as 200",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.1.2 remote-as 3",
"cmd": "neighbor 172.16.1.2 remote-as 3",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 209.165.202.129 prefix-list ISP1 in",
"cmd": "neighbor 209.165.202.129 prefix-list ISP1 in",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 209.165.200.225 prefix-list ISP2 in",
"cmd": "neighbor 209.165.200.225 prefix-list ISP2 in",
"desc": "Disables the IPv4 unicast address family for the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:0db8:12: :2 remote-as 65501",
"cmd": "neighbor 2001:0db8:12: :2 remote-as 65501",
"desc": "Starts BGP routing process 100"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.0.0.44 remote-as 200",
"cmd": "neighbor 10.0.0.44 remote-as 200",
"desc": "Adds the IPv4 address of the neighbor in the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:0:cc00: :1 remote-as 200",
"cmd": "neighbor 2001:db8:0:cc00: :1 remote-as 200",
"desc": "Adds the IPv6 address of the neighbor in the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "address-family ipv4",
"cmd": "address-family ipv4",
"desc": "Enters into address-family configuration mode for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "address-family ipv4 multicast",
"cmd": "address-family ipv4 multicast",
"desc": "Enters into address-family configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "address-family ipv4 vrf",
"cmd": "address-family ipv4 vrf",
"desc": "Enables the exchange of information with a BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "no neighbor 2001:db8:1:1::1 activate",
"cmd": "no neighbor 2001:db8:1:1::1 activate",
"desc": "Disables the exchange of information with the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 10.108.0.0 mask 255.255.0.0",
"cmd": "network 10.108.0.0 mask 255.255.0.0",
"desc": "Specifies the network to be advertised by the BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:0:cc00: :1 activate",
"cmd": "neighbor 2001:db8:0:cc00: :1 activate",
"desc": "IPv6 address family with the local device"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 2001:db8:1:1::/6 4",
"cmd": "network 2001:db8:1:1::/6 4",
"desc": "Exchange IPv4 and IPv6 Routes"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.2 remoteas 65501",
"cmd": "neighbor 192.168.1.2 remoteas 65501",
"desc": "Unicast address prefixes are the default when IPv4 address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.2 activate",
"cmd": "neighbor 192.168.1.2 activate",
"desc": "Enables the exchange of IPv4 BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 10.1.1.1 mask 255.255.255.255",
"cmd": "network 10.1.1.1 mask 255.255.255.255",
"desc": "Exits the IPv4 address-family configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 10.2.2.2 mask 255.255.255.255",
"cmd": "network 10.2.2.2 mask 255.255.255.255",
"desc": "Exits the IPv4 address-family configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:12::2 activate",
"cmd": "neighbor 2001:db8:12::2 activate",
"desc": "Enables the exchange of IPv6 BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "network 2001:db8:2::1/64",
"cmd": "network 2001:db8:2::1/64",
"desc": "Enables the forwarding of IPv6 unicast"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 65501",
"cmd": "router bgp 65501",
"desc": "Configures R1 as an IPv6 BGP neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.1 remoteas 65500",
"cmd": "neighbor 192.168.1.1 remoteas 65500",
"desc": "Enters IPv4 address-family configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.1 activate",
"cmd": "neighbor 192.168.1.1 activate",
"desc": "Enters IPv6 address-family configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:12::1 activate",
"cmd": "neighbor 2001:db8:12::1 activate",
"desc": "Cisco implementation of 4-byte autonomous system (AS) numbers"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "bgp asnotation dot",
"cmd": "bgp asnotation dot",
"desc": "IPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 64511",
"cmd": "router bgp 64511",
"desc": "Identifies R1 as an EBGP neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.1.2 remote-as 64511",
"cmd": "neighbor 172.16.1.2 remote-as 64511",
"desc": "Identifies R3 as an IBGP neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.1.2 update-source loopback 0",
"cmd": "neighbor 172.16.1.2 update-source loopback 0",
"desc": "Informs R2 to use the Loopback 0 IP address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.1.2 next-hop-self",
"cmd": "neighbor 172.16.1.2 next-hop-self",
"desc": "IBGP NEXT-HOP BEHAVIOR"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip route 10.20.20.1 255.255.255.255 209.165.201.2",
"cmd": "ip route 10.20.20.1 255.255.255.255 209.165.201.2",
"desc": "Defines a static route to the Loopback 0"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 64496",
"cmd": "router bgp 64496",
"desc": "Identifies a peer router at 10.20.20.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.20.20.1 update-source loopback 0",
"cmd": "neighbor 10.20.20.1 update-source loopback 0",
"desc": "Informs R1 to use the Loopback 0 IP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.20.20.1 ebgp-multihop 2",
"cmd": "neighbor 10.20.20.1 ebgp-multihop 2",
"desc": "Allows for two routers that are not"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip route 10.10.10.1",
"cmd": "ip route 10.10.10.1",
"desc": "Identifies a peer router at 10.10.10.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.10.10.1 update-source loopback 0",
"cmd": "neighbor 10.10.10.1 update-source loopback 0",
"desc": "Informs R2 to use the Loopback 0 IP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.10.10.1 ebgp-multihop 2",
"cmd": "neighbor 10.10.10.1 ebgp-multihop 2",
"desc": "Weight is a Cisco-specific parameter. The weight is configured"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 300",
"cmd": "router bgp 300",
"desc": "Identifies a peer router at"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.7.1 weight 2000",
"cmd": "neighbor 192.168.7.1 weight 2000",
"desc": "Sets the weight of all route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.219.1 weight 1000",
"cmd": "neighbor 192.168.219.1 weight 1000",
"desc": "Sets the weight of all route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 198.133.219.1 remote-as 7",
"cmd": "neighbor 198.133.219.1 remote-as 7",
"desc": "Sets the weight of all route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 198.133.219.1 removeprivate-as",
"cmd": "neighbor 198.133.219.1 removeprivate-as",
"desc": "Sets the weight of all route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.100.1 default-originate",
"cmd": "neighbor 192.168.100.1 default-originate",
"desc": "Sets the weight of all route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.219.1 remote-as 200",
"cmd": "neighbor 192.168.219.1 remote-as 200",
"desc": "The result of this configuration will have Houston forward traffic"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip prefix-list AS400_ROUTES permit 172.16.10.0/24",
"cmd": "ip prefix-list AS400_ROUTES permit 172.16.10.0/24",
"desc": "Creates a prefix list that matches the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "route-map SETWEIGHT permit 10",
"cmd": "route-map SETWEIGHT permit 10",
"desc": "Creates a route map called SETWEIGHT. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "match ip address prefixlist AS400_ROUTES",
"cmd": "match ip address prefixlist AS400_ROUTES",
"desc": "Specifies the condition under which policy"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set weight 200",
"cmd": "set weight 200",
"desc": "Creates the second statement for the route map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set local-preference 200",
"cmd": "set local-preference 200",
"desc": "Creates the second statement for the route map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set weight 100",
"cmd": "set weight 100",
"desc": "A path with a higher local preference is preferred. The local"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "bgp default local-preference 150",
"cmd": "bgp default local-preference 150",
"desc": "Manipulate the Local Preference Attribute"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 256",
"cmd": "router bgp 256",
"desc": "Identifies a peer router at 172.17.1.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.17.1.1 route-map SETLOCAL in",
"cmd": "neighbor 172.17.1.1 route-map SETLOCAL in",
"desc": "Refers to a route map called SETLOCAL. All"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.1.1.1 remote-as 256",
"cmd": "neighbor 10.1.1.1 remote-as 256",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip as-path accesslist 7 permit ^300$",
"cmd": "ip as-path accesslist 7 permit ^300$",
"desc": "Permits updates whose AS path attribute"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "route-map SETPATH permit 10",
"cmd": "route-map SETPATH permit 10",
"desc": "Permits updates whose AS path attribute"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "route-map SETMEDOUT permit 10",
"cmd": "route-map SETMEDOUT permit 10",
"desc": "Permits updates whose AS path attribute"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "route-map SETLOCAL permit 10",
"cmd": "route-map SETLOCAL permit 10",
"desc": "Creates a route map called SETLOCAL. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "match as-path 7",
"cmd": "match as-path 7",
"desc": "Tells the BGP process what locally learned"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.220.2 remote-as 200",
"cmd": "neighbor 192.168.220.2 remote-as 200",
"desc": "Identifies a peer router at 192.168.220.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.7.2 remote-as 100",
"cmd": "neighbor 192.168.7.2 remote-as 100",
"desc": "Identifies a peer router at 192.168.7.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.7.2 route-map SETPATH out",
"cmd": "neighbor 192.168.7.2 route-map SETPATH out",
"desc": "Creates a route map named SETPATH. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set as-path prepend",
"cmd": "set as-path prepend",
"desc": "The result of this configuration is that the AS path attribute of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 1",
"cmd": "router bgp 1",
"desc": "Identifies a peer router at 10.2.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.3.0.1 remote-as 300",
"cmd": "neighbor 10.3.0.1 remote-as 300",
"desc": "Identifies a peer router at 10.4.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.2.0.2 route-map SETMEDOUT out",
"cmd": "neighbor 10.2.0.2 route-map SETMEDOUT out",
"desc": "Identifies a peer router at 10.4.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 400",
"cmd": "router bgp 400",
"desc": "Identifies a peer router at 10.4.0.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.4.0.2 route-map SETMEDOUT out",
"cmd": "neighbor 10.4.0.2 route-map SETMEDOUT out",
"desc": "Refers to a route map named SETMEDOUT"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.5.0.2 remote-as 300",
"cmd": "neighbor 10.5.0.2 remote-as 300",
"desc": "This route map will permit traffic based on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.1.0.2 remote-as 300",
"cmd": "neighbor 10.1.0.2 remote-as 300",
"desc": "This route map will permit traffic based on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.1.0.1 remote-as 300",
"cmd": "neighbor 10.1.0.1 remote-as 300",
"desc": "This route map will permit traffic based on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set",
"cmd": "set",
"desc": "Identifies a peer router at 10.3.0.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set metric 120",
"cmd": "set metric 120",
"desc": "Identifies a peer router at 10.3.0.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "set metric 200",
"cmd": "set metric 200",
"desc": "Identifies a peer router at 10.3.0.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.3.0.2 route-map SETMEDOUT out",
"cmd": "neighbor 10.3.0.2 route-map SETMEDOUT out",
"desc": "Identifies a peer router at 10.1.0.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.5.0.1 remote-as 400",
"cmd": "neighbor 10.5.0.1 remote-as 400",
"desc": "To force Mazatlan to include updates for network 192.168.100.0"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.4.0.1 remote-as 400",
"cmd": "neighbor 10.4.0.1 remote-as 400",
"desc": "EBGP MULTIHOP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "bgp always-compare-med",
"cmd": "bgp always-compare-med",
"desc": "EBGP MULTIHOP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show bgp all community",
"cmd": "show bgp all community",
"desc": "Displays routes for all address families"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show bgp all neighbors",
"cmd": "show bgp all neighbors",
"desc": "Displays information about BGP connections"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show bgp ipv6 unicast",
"cmd": "show bgp ipv6 unicast",
"desc": "Displays entries in the IPv6 BGP routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show bgp ipv6 unicast ribfailure",
"cmd": "show bgp ipv6 unicast ribfailure",
"desc": "Displays the IPv6 BGP routes that fail to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp",
"cmd": "show ip bgp",
"desc": "Displays entries in the BGP table"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp neighbors",
"cmd": "show ip bgp neighbors",
"desc": "Displays networks that are not installed in"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp summary",
"cmd": "show ip bgp summary",
"desc": "Displays the status of all IPv4 BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show bgp ipv6 unicast summary",
"cmd": "show bgp ipv6 unicast summary",
"desc": "Displays the status of all IPv6 BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip route bgp",
"cmd": "show ip route bgp",
"desc": "Displays the IPv4 BGP entries from the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show bgp ipv6 unicast neighbors",
"cmd": "show bgp ipv6 unicast neighbors",
"desc": "Displays the IPv4 BGP entries from the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ipv6 route bgp",
"cmd": "show ipv6 route bgp",
"desc": "Forces BGP to clear its table and resets all BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear ip bgp ipv4",
"cmd": "clear ip bgp ipv4",
"desc": "Resets BGP connections for the IPv4 unicast address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear ip bgp ipv6 unicast autonomoussystem-number",
"cmd": "clear ip bgp ipv6 unicast autonomoussystem-number",
"desc": "Resets BGP connections for the IPv6 unicast address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear ip bgp 10.1.1.1",
"cmd": "clear ip bgp 10.1.1.1",
"desc": "Resets the specific BGP session with the neighbor at"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear ip bgp 10.1.1.2 soft out",
"cmd": "clear ip bgp 10.1.1.2 soft out",
"desc": "The clear ip bgp w.x.y.z soft out command is highly recommended when"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.1.1.2 softreconfiguratio n inbound",
"cmd": "neighbor 10.1.1.2 softreconfiguratio n inbound",
"desc": "The soft-reconfiguration inbound command is memory intensive"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear ip bgp 10.1.1.2 soft in",
"cmd": "clear ip bgp 10.1.1.2 soft in",
"desc": "Uses the stored information to generate new"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "clear",
"cmd": "clear",
"desc": "Creates a dynamic soft reset of inbound BGP routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "debug ip bgp",
"cmd": "debug ip bgp",
"desc": "Displays all information related to BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "debug ip bgp events",
"cmd": "debug ip bgp events",
"desc": "Displays all BGP event information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "debug ip bgp updates",
"cmd": "debug ip bgp updates",
"desc": "Displays information about the processing of BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "debug ip bgp ipv4 unicast",
"cmd": "debug ip bgp ipv4 unicast",
"desc": "Displays all IPv4 unicast address family information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "debug ip bgp ipv6 unicast",
"cmd": "debug ip bgp ipv6 unicast",
"desc": "VERIFYING BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 65010",
"cmd": "router bgp 65010",
"desc": "Enters BGP routing configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.1.1.1 routereflector-client",
"cmd": "neighbor 10.1.1.1 routereflector-client",
"desc": "Configures the local router as a BGP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 10.3.3.3 routereflector-client",
"cmd": "neighbor 10.3.3.3 routereflector-client",
"desc": "Matches 0 or more single- or multiple-character patterns"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip as-path access-list 1 permit 2150",
"cmd": "ip as-path access-list 1 permit 2150",
"desc": "Matches any AS path that includes the pattern of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp regexp 2150",
"cmd": "show ip bgp regexp 2150",
"desc": "To find all subnets reachable via AS 65002 (AS path begins with"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "show ip bgp regexp ^$ Network Next Hop *>i192.168.3.3/32 0.0.0.0",
"cmd": "show ip bgp regexp ^$ Network Next Hop *>i192.168.3.3/32 0.0.0.0",
"desc": "Distribute Lists"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 3",
"cmd": "router bgp 3",
"desc": "Identifies a peer router at 172.16.1.2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.20.1 remote-as 1",
"cmd": "neighbor 172.16.20.1 remote-as 1",
"desc": "Identifies a peer router at 172.16.20.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 172.16.20.1",
"cmd": "neighbor 172.16.20.1",
"desc": "Creates the filter that allows all other"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "access-list 101 permit ip 172.16.0.0 0.0.255.255 255.255.0.0 0.0.0.0",
"cmd": "access-list 101 permit ip 172.16.0.0 0.0.255.255 255.255.0.0 0.0.0.0",
"desc": "Path Access Lists"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip prefixlist ISP1 permit 0.0.0.0 ge 16 le 24",
"cmd": "ip prefixlist ISP1 permit 0.0.0.0 ge 16 le 24",
"desc": "Creates a prefix list that only permits"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip as-path access-list 1 permit ^$",
"cmd": "ip as-path access-list 1 permit ^$",
"desc": "Creates an AS path access list matching"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 65000",
"cmd": "router bgp 65000",
"desc": "Assigns the ISP1 prefix list to neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 209.165.202.129 filter-list 1 out",
"cmd": "neighbor 209.165.202.129 filter-list 1 out",
"desc": "Assigns the AS path access list to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "ip prefixlist ISP2 permit 0.0.0.0 ge 16 le 24",
"cmd": "ip prefixlist ISP2 permit 0.0.0.0 ge 16 le 24",
"desc": "Assigns the ISP2 prefix list to neighbor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 209.165.200.225 filter-list 1 out",
"cmd": "neighbor 209.165.200.225 filter-list 1 out",
"desc": "Starts the BGP routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor INTERNAL peer-group",
"cmd": "neighbor INTERNAL peer-group",
"desc": "Creates a BGP peer"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor INTERNAL remote-as 65500",
"cmd": "neighbor INTERNAL remote-as 65500",
"desc": "Assigns a first parameter"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor INTERNAL next-hop-self",
"cmd": "neighbor INTERNAL next-hop-self",
"desc": "Assigns a second"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor INTERNAL update-source loopback 0",
"cmd": "neighbor INTERNAL update-source loopback 0",
"desc": "Assigns a third"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor INTERNAL route-reflector-client",
"cmd": "neighbor INTERNAL route-reflector-client",
"desc": "Assigns a fourth"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.2 peer-group INTERNAL",
"cmd": "neighbor 192.168.1.2 peer-group INTERNAL",
"desc": "Assigns the peer group to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.3 peer-group INTERNAL",
"cmd": "neighbor 192.168.1.3 peer-group INTERNAL",
"desc": "Authentication for routers using BGP relies on the use of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.4 peer-group INTERNAL",
"cmd": "neighbor 192.168.1.4 peer-group INTERNAL",
"desc": "Authentication for routers using BGP relies on the use of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 192.168.1.5 peer-group INTERNAL",
"cmd": "neighbor 192.168.1.5 peer-group INTERNAL",
"desc": "Authentication for routers using BGP relies on the use of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "router bgp 65100",
"cmd": "router bgp 65100",
"desc": "Defines a BGP peer at IP address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 209.165.202.130 password P@55word",
"cmd": "neighbor 209.165.202.130 password P@55word",
"desc": "Enables MD5 authentication on a TCP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "BGP",
"title": "neighbor 2001:db8:0:10::1 password P@55word",
"cmd": "neighbor 2001:db8:0:10::1 password P@55word",
"desc": "ROUTE REFLECTORS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 209.165.201.2 255.255.255.248",
"cmd": "ip address 209.165.201.2 255.255.255.248",
"desc": "Assigns a public IP address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat outside",
"cmd": "ip nat outside",
"desc": "Defines which interface is the outside"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethernet 0/0/1",
"cmd": "interface gigabitethernet 0/0/1",
"desc": "Enters GigabitEthernet 0/0/1 interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat inside",
"cmd": "ip nat inside",
"desc": "Defines which interface is the inside"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat inside source static 192.168.1.10 209.165.201.5",
"cmd": "ip nat inside source static 192.168.1.10 209.165.201.5",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat inside source list 1 pool R1_POOL",
"cmd": "ip nat inside source list 1 pool R1_POOL",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat inside source list 1 interface gigabitethern et 0/0/0",
"cmd": "ip nat inside source list 1 interface gigabitethern et 0/0/0",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "ip route 0.0.0.0 0.0.0.0 198.133.219.2",
"cmd": "ip route 0.0.0.0 0.0.0.0 198.133.219.2",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip dhcp excluded-address 172.16.10.1 172.16.10.10",
"cmd": "ip dhcp excluded-address 172.16.10.1 172.16.10.10",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "ip route 192.168.3.0 255.255.255.0 serial 0/0/0",
"cmd": "ip route 192.168.3.0 255.255.255.0 serial 0/0/0",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Static",
"title": "ip route 0.0.0.0 0.0.0.0 serial 0/0/1",
"cmd": "ip route 0.0.0.0 0.0.0.0 serial 0/0/1",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 route 2001: db8:192:3::/64 2001:db8:192:1::1",
"cmd": "ipv6 route 2001: db8:192:3::/64 2001:db8:192:1::1",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 route ::/0 2001:db8:192:1::2",
"cmd": "ipv6 route ::/0 2001:db8:192:1::2",
"desc": "Defines an access list that identifies the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat pool R1_POOL 209.165.201.8 209.165.201.15 netmask 255.255.255.2",
"cmd": "ip nat pool R1_POOL 209.165.201.8 209.165.201.15 netmask 255.255.255.248",
"desc": "Creates a pool of eight public addresses"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethern et 0/0/0",
"cmd": "interface gigabitethern et 0/0/0",
"desc": "Enters GigabitEthernet 0/0/0 interface configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 209.165.201.2",
"cmd": "ip address 209.165.201.2",
"desc": "Defines which interface is the outside interface for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethern et 0/0/1",
"cmd": "interface gigabitethern et 0/0/1",
"desc": "Configuring a NAT Virtual Interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat enable",
"cmd": "ip nat enable",
"desc": "Allows the interface to participate in NVI translation"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "show ip nat nvi translations",
"cmd": "show ip nat nvi translations",
"desc": "IP Services"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "show ip nat nvi statistics",
"cmd": "show ip nat nvi statistics",
"desc": "Verifying NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 1 priority 120",
"cmd": "standby 1 priority 120",
"desc": "Verifying NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "show vrrp",
"cmd": "show vrrp",
"desc": "Verifying NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 11 track 1 decrement 12",
"cmd": "standby 11 track 1 decrement 12",
"desc": "Verifying NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp server STATELESS",
"cmd": "ipv6 dhcp server STATELESS",
"desc": "Verifying NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 nd prefix",
"cmd": "ipv6 nd prefix",
"desc": "Verifying NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show access-list",
"cmd": "show access-list",
"desc": "Displays access lists"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "show ip nat translations",
"cmd": "show ip nat translations",
"desc": "Displays the translation"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "show ip nat statistics",
"cmd": "show ip nat statistics",
"desc": "Displays NAT statistics"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "clear ip nat translation",
"cmd": "clear ip nat translation",
"desc": "Clears a specific"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "clear ip nat translation *",
"cmd": "clear ip nat translation *",
"desc": "Troubleshooting NAT and PAT Configurations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "debug ip nat",
"cmd": "debug ip nat",
"desc": "CAUTION: Using this command can potentially"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "debug ip nat detailed",
"cmd": "debug ip nat detailed",
"desc": "ISP Router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "hostname Company",
"cmd": "hostname Company",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan30",
"cmd": "interface vlan30",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "hostname Edmonton",
"cmd": "hostname Edmonton",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "hostname Gibbons",
"cmd": "hostname Gibbons",
"desc": "Sets the host name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "enable secret cisco",
"cmd": "enable secret cisco",
"desc": "Sets the encrypted password to cisco"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "line console 0",
"cmd": "line console 0",
"desc": "Moves to line console mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "password cisco",
"cmd": "password cisco",
"desc": "Sets the console line password to class"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "password class",
"cmd": "password class",
"desc": "Sets the console line password to class"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Logging",
"title": "logging synchronous",
"cmd": "logging synchronous",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 198.133.219.2 255.255.255.252",
"cmd": "ip address 198.133.219.2 255.255.255.252",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 198.133.219.1 255.255.255.252",
"cmd": "ip address 198.133.219.1 255.255.255.252",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "standby 1 preempt",
"cmd": "standby 1 preempt",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "standby 1 preempt delay minimum 180 reload 140",
"cmd": "standby 1 preempt delay minimum 180 reload 140",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 1 timers 5 15",
"cmd": "standby 1 timers 5 15",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 1 authentication text canada",
"cmd": "standby 1 authentication text canada",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 172.16.100.5 255.255.255.0",
"cmd": "ip address 172.16.100.5 255.255.255.0",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 address-family ipv4",
"cmd": "vrrp 10 address-family ipv4",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 1 track 10 decrement 30",
"cmd": "vrrp 1 track 10 decrement 30",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 1 ip 192.168.1.254",
"cmd": "standby 1 ip 192.168.1.254",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 20 ip 192.168.20.254",
"cmd": "standby 20 ip 192.168.20.254",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 30 ip 192.168.30.254",
"cmd": "standby 30 ip 192.168.30.254",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip helperaddress 172.16.20.2",
"cmd": "ip helperaddress 172.16.20.2",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "description LAN Interface",
"cmd": "description LAN Interface",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "description Link to Gibbons Router",
"cmd": "description Link to Gibbons Router",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "description Link to Edmonton Router",
"cmd": "description Link to Edmonton Router",
"desc": "Assigns the clock rate to the DCE cable on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 192.31.7.1 255.255.255.255",
"cmd": "ip address 192.31.7.1 255.255.255.255",
"desc": "Returns to privileged EXEC mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat",
"cmd": "ip nat",
"desc": "Creates NAT by combining list 1 with"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat source list 1 pool R1_POOL",
"cmd": "ip nat source list 1 pool R1_POOL",
"desc": "Enables translation of addresses"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ip nat source static 172.16.1.100 209.165.201.5",
"cmd": "ip nat source static 172.16.1.100 209.165.201.5",
"desc": "Permanently translates the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface fastethernet 1/0",
"cmd": "interface fastethernet 1/0",
"desc": "Moves to interface configuration mode on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 172.16.0.10",
"cmd": "ip address 172.16.0.10",
"desc": "Assigns IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 1 ip 172.16.0.1",
"cmd": "standby 1 ip 172.16.0.1",
"desc": "Verifying HSRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 ip 192.168.10.254",
"cmd": "standby 10 ip 192.168.10.254",
"desc": "Verifying HSRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 ip 172.16.100.1",
"cmd": "vrrp 10 ip 172.16.100.1",
"desc": "Verifying HSRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "show standby",
"cmd": "show standby",
"desc": "Displays HSRP information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "show standby brief",
"cmd": "show standby brief",
"desc": "Displays a single-line output summary of"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show standby vlan 1",
"cmd": "show standby vlan 1",
"desc": "Options are available that make it possible to optimize HSRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "no standby 1 preempt delay",
"cmd": "no standby 1 preempt delay",
"desc": "The default unit of time is seconds"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 1 timers msec 200 msec 600",
"cmd": "standby 1 timers msec 200 msec 600",
"desc": "IP Services"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "key chain MyHSRPChain",
"cmd": "key chain MyHSRPChain",
"desc": "IP Services"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 2 authentication md5 key-string england",
"cmd": "standby 2 authentication md5 key-string england",
"desc": "Configures england as the MD5"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 3 authentication md5 key-chain MyHSRPChain",
"cmd": "standby 3 authentication md5 key-chain MyHSRPChain",
"desc": "HSRP IP SLA Tracking"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip sla 10",
"cmd": "ip sla 10",
"desc": "Exits SLA configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip sla schedule 10 start-time now life forever",
"cmd": "ip sla schedule 10 start-time now life forever",
"desc": "Configures the scheduling for SLA 10 to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip sla schedule 10 start-time",
"cmd": "ip sla schedule 10 start-time",
"desc": "Configures the scheduling for SLA 10 to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip sla schedule 11 life forever starttime now",
"cmd": "ip sla schedule 11 life forever starttime now",
"desc": "Configures the scheduling for SLA 10 to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "track 90 ip sla 10 state",
"cmd": "track 90 ip sla 10 state",
"desc": "SLA process 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 priority 110",
"cmd": "standby 10 priority 110",
"desc": "Assigns a priority value of 110 to standby"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "standby 10 preempt",
"cmd": "standby 10 preempt",
"desc": "HSRP Version 2 must be enabled on an interface before HSRP for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 track 90 decrement 20",
"cmd": "standby 10 track 90 decrement 20",
"desc": "HSRP Version 2 must be enabled on an interface before HSRP for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby version 2",
"cmd": "standby version 2",
"desc": "Debugging HSRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby",
"cmd": "debug standby",
"desc": "Displays HSRP error messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby errors",
"cmd": "debug standby errors",
"desc": "Displays HSRP error messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby events",
"cmd": "debug standby events",
"desc": "Displays HSRP event messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby events terse",
"cmd": "debug standby events terse",
"desc": "Displays all HSRP events except for hellos and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby events track",
"cmd": "debug standby events track",
"desc": "Displays all HSRP tracking events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby packets",
"cmd": "debug standby packets",
"desc": "Displays HSRP packet messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug standby terse",
"cmd": "debug standby terse",
"desc": "VRRP supports using the real interface IP address as the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 description Engineering Group",
"cmd": "vrrp 10 description Engineering Group",
"desc": "Assigns a text description to the group"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 priority 110",
"cmd": "vrrp 10 priority 110",
"desc": "Sets the priority level for this VLAN. The"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 preempt",
"cmd": "vrrp 10 preempt",
"desc": "The preempt VRRP option is enabled by default"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 preempt delay minimum 60",
"cmd": "vrrp 10 preempt delay minimum 60",
"desc": "The default delay period is 0 seconds"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 timers advertise 15",
"cmd": "vrrp 10 timers advertise 15",
"desc": "The range of the advertisement timer is 1 to 255 seconds. If"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 timers learn",
"cmd": "vrrp 10 timers learn",
"desc": "Configures plain-text authentication for group"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 shutdown",
"cmd": "vrrp 10 shutdown",
"desc": "Configures plain-text authentication for group"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "no vrrp 10 shutdown",
"cmd": "no vrrp 10 shutdown",
"desc": "Configures plain-text authentication for group"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 authentication md5 key-string winnipeg",
"cmd": "vrrp 10 authentication md5 key-string winnipeg",
"desc": "Specifies an IPv4 address for the VRRP group"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "priority 150",
"cmd": "priority 150",
"desc": "Enables preemption of lower priority master"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "timers advertise 5000",
"cmd": "timers advertise 5000",
"desc": "Interface Tracking"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "track 10 interface gigabitethernet 1/0/1 line-protocol",
"cmd": "track 10 interface gigabitethernet 1/0/1 line-protocol",
"desc": "Displays VRRP information"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "show vrrp brief",
"cmd": "show vrrp brief",
"desc": "Displays a brief status of all VRRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "show vrrp 10",
"cmd": "show vrrp 10",
"desc": "VRRP group 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vrrp interface vlan10",
"cmd": "show vrrp interface vlan10",
"desc": "Displays information about VRRPv2 as"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vrrp interface vlan10 brief",
"cmd": "show vrrp interface vlan10 brief",
"desc": "Displays a brief summary about VRRPv2"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vrrp ipv4 vlan 10",
"cmd": "show vrrp ipv4 vlan 10",
"desc": "Displays information about VRRPv3 as"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vrrp brief vlan 10",
"cmd": "show vrrp brief vlan 10",
"desc": "Debugging VRRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "debug vrrp all",
"cmd": "debug vrrp all",
"desc": "Displays all VRRP messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "debug vrrp error",
"cmd": "debug vrrp error",
"desc": "Displays all VRRP error messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "debug vrrp events",
"cmd": "debug vrrp events",
"desc": "Displays all VRRP event messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "debug vrrp packet",
"cmd": "debug vrrp packet",
"desc": "Displays messages about packets sent and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "debug vrrp state",
"cmd": "debug vrrp state",
"desc": "IP Services"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 1 priority 105",
"cmd": "standby 1 priority 105",
"desc": "Assigns a priority value of 105 to standby group 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 1 priority 100",
"cmd": "standby 1 priority 100",
"desc": "Assigns a priority value of 105 to standby group 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 1 track gigabitethernet 1/0/1 20",
"cmd": "standby 1 track gigabitethernet 1/0/1 20",
"desc": "GigabitEthernet 1/0/1. If GigabitEthernet 1/0/1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 1 track gigabitethernet 1/0/2",
"cmd": "standby 1 track gigabitethernet 1/0/2",
"desc": "Activates HSRP group 10 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 10 track gigabitethernet 1/0/2",
"cmd": "standby 10 track gigabitethernet 1/0/2",
"desc": "Activates HSRP group 10 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 20 track gigabitethernet 1/0/2",
"cmd": "standby 20 track gigabitethernet 1/0/2",
"desc": "Activates HSRP group 10 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 30 track gigabitethernet 1/0/2",
"cmd": "standby 30 track gigabitethernet 1/0/2",
"desc": "Activates HSRP group 10 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 10",
"cmd": "standby 10",
"desc": "Assigns a priority value of 105 to standby group 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 10 priority 100",
"cmd": "standby 10 priority 100",
"desc": "Assigns a priority value of 105 to standby group 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 10 track gigabitethernet 1/0/1 20",
"cmd": "standby 10 track gigabitethernet 1/0/1 20",
"desc": "Assigns a priority value of 100 to standby group 20"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 20 track gigabitethernet 1/0/1 20",
"cmd": "standby 20 track gigabitethernet 1/0/1 20",
"desc": "Activates HSRP group 30 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 30 priority 100",
"cmd": "standby 30 priority 100",
"desc": "Assigns a priority value of 100 to standby group 30"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 30 priority 105",
"cmd": "standby 30 priority 105",
"desc": "Assigns a priority value of 100 to standby group 30"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 30 track gigabitethernet 1/0/1 20",
"cmd": "standby 30 track gigabitethernet 1/0/1 20",
"desc": "Assigns a priority value of 100 to standby group 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 1",
"cmd": "standby 1",
"desc": "Activates HSRP group 20 on the interface and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 20 priority 105",
"cmd": "standby 20 priority 105",
"desc": "Assigns a priority value of 105 to standby group 20"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 20 preempt",
"cmd": "standby 20 preempt",
"desc": "Assigns a priority value of 105 to standby group 30"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 30 preempt",
"cmd": "standby 30 preempt",
"desc": "Exits SLA programming mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "standby 30 track gigabitethernet",
"cmd": "standby 30 track gigabitethernet",
"desc": "Exits SLA programming mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip sla schedule 10 life forever start-time now",
"cmd": "ip sla schedule 10 life forever start-time now",
"desc": "Specifies the SLA start time and duration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "track 100",
"cmd": "track 100",
"desc": "Creates tracking object 100 calling SLA 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "track 2 interface gigabitethernet 0/0/2 line-protocol",
"cmd": "track 2 interface gigabitethernet 0/0/2 line-protocol",
"desc": "GigabitEthernet 0/0/0"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "ip address 10.1.11.2 255.255.255.0",
"cmd": "ip address 10.1.11.2 255.255.255.0",
"desc": "Assigns the physical interface address of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 11 ip 10.1.11.1",
"cmd": "vrrp 11 ip 10.1.11.1",
"desc": "Assigns the VRRP virtual IP address of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 ip 10.1.10.1",
"cmd": "vrrp 10 ip 10.1.10.1",
"desc": "Assigns the VRRP virtual IP address of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 11 authentication text CISCO123",
"cmd": "vrrp 11 authentication text CISCO123",
"desc": "Authentication by key chain is not available on some L3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 priority 105",
"cmd": "vrrp 10 priority 105",
"desc": "Authentication by key chain is not available on some L3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 11 priority 105",
"cmd": "vrrp 11 priority 105",
"desc": "Authentication by key chain is not available on some L3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 11 track 2",
"cmd": "vrrp 11 track 2",
"desc": "Enters interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "ip address 10.1.10.2 255.255.255.0",
"cmd": "ip address 10.1.10.2 255.255.255.0",
"desc": "Assigns group 10 virtual forwarder priority"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "ipv6 address 2001:0:0:6::2/64",
"cmd": "ipv6 address 2001:0:0:6::2/64",
"desc": "Assigns group 10 virtual forwarder priority"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "ipv6 address 2001:0:0:5::2/64",
"cmd": "ipv6 address 2001:0:0:5::2/64",
"desc": "Assigns group 10 virtual forwarder priority"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "ipv6 address 2001:0:0:3::1/64",
"cmd": "ipv6 address 2001:0:0:3::1/64",
"desc": "Assigns group 10 virtual forwarder priority"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 track 2",
"cmd": "vrrp 10 track 2",
"desc": "GigabitEthernet 0/0/2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp 10 track 100 decrement 6",
"cmd": "vrrp 10 track 100 decrement 6",
"desc": "Specifies SLA 10 start time and duration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "track 100 ip sla 10",
"cmd": "track 100 ip sla 10",
"desc": "HSRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "track 2 interface gigabitethernet 1/0/5 line-protocol",
"cmd": "track 2 interface gigabitethernet 1/0/5 line-protocol",
"desc": "Creates tracking object 2 to monitor line"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethernet 1/0/5",
"cmd": "interface gigabitethernet 1/0/5",
"desc": "Changes GigabitEthernet 1/0/5 to a Layer"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 10.3.1.1 255.255.255.252",
"cmd": "ip address 10.3.1.1 255.255.255.252",
"desc": "Assigns IPv4 address 10.3.1.1/30"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport trunk allowed vlan 1,10",
"cmd": "switchport trunk allowed vlan 1,10",
"desc": "VLANs 1 and 10"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport trunk allowed vlan 1,11",
"cmd": "switchport trunk allowed vlan 1,11",
"desc": "VLANs 1 and 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitethernet 1/0/7",
"cmd": "interface gigabitethernet 1/0/7",
"desc": "Enters switched virtual interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 10.1.10.3",
"cmd": "ip address 10.1.10.3",
"desc": "GigabitEthernet 1/0/5"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 10.1.11.3 255.255.255.0",
"cmd": "ip address 10.1.11.3 255.255.255.0",
"desc": "GigabitEthernet 1/0/5"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "interface vlan 11",
"cmd": "interface vlan 11",
"desc": "IPv6 Configuration Example: HSRPv2 on Router and L3 Switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "HA",
"title": "vrrp",
"cmd": "vrrp",
"desc": "IPv6 Configuration Example: HSRPv2 on Router and L3 Switch"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip sla 11",
"cmd": "ip sla 11",
"desc": "Defines the start and duration for SLA 11"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "track 111 ip sla 11",
"cmd": "track 111 ip sla 11",
"desc": "HSRPv2 is required for IPv6 implementation"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 11 ipv6 autoconfig",
"cmd": "standby 11 ipv6 autoconfig",
"desc": "The standby group ipv6 interface command can offer"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "standby 11 preempt",
"cmd": "standby 11 preempt",
"desc": "The same preempt command arguments are available"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 11 track gigabitethernet 0/0/2 12",
"cmd": "standby 11 track gigabitethernet 0/0/2 12",
"desc": "Selects HSRPv2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 ipv6 autoconfig",
"cmd": "standby 10 ipv6 autoconfig",
"desc": "Creates IPv6 HSRP virtual address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 priority 105",
"cmd": "standby 10 priority 105",
"desc": "Sets a priority of 105 for standby group 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 track 111 decrement 10",
"cmd": "standby 10 track 111 decrement 10",
"desc": "Sets a priority of 105 for standby group 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 11 priority 105",
"cmd": "standby 11 priority 105",
"desc": "Sets a priority of 105 for standby group 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby",
"cmd": "standby",
"desc": "Links tracking object 1 to this HSRP group"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 10 track 111 decrement 7",
"cmd": "standby 10 track 111 decrement 7",
"desc": "SLA 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "track 101 ip sla 11",
"cmd": "track 101 ip sla 11",
"desc": "Changes Layer 2 switch port to a Layer 3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address 2001:0:0:1::1/64",
"cmd": "ipv6 address 2001:0:0:1::1/64",
"desc": "Permits traffic from VLANs 1 and 10 on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface gigabitfastethernet 0/7",
"cmd": "interface gigabitfastethernet 0/7",
"desc": "Specifies HSRPv2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address 2001:0:0:5::3/64",
"cmd": "ipv6 address 2001:0:0:5::3/64",
"desc": "Enters interface configuration mode for VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address 2001:0:0:6::3/64",
"cmd": "ipv6 address 2001:0:0:6::3/64",
"desc": "Sets a priority of 105 for standby group 11 on"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "standby 11 track 111 decrement 10",
"cmd": "standby 11 track 111 decrement 10",
"desc": "DHCP is a network management protocol used on UDP/IP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip dhcp pool INTERNAL",
"cmd": "ip dhcp pool INTERNAL",
"desc": "Creates a DHCP pool named INTERNAL. The"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "network 172.16.10.0 255.255.255.0",
"cmd": "network 172.16.10.0 255.255.255.0",
"desc": "Defines the domain name for the client"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "lease 14 12 23",
"cmd": "lease 14 12 23",
"desc": "The DHCP pool programming must also include any other required"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "lease infinite",
"cmd": "lease infinite",
"desc": "The DHCP pool programming must also include any other required"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip dhcp pool POOL1",
"cmd": "ip dhcp pool POOL1",
"desc": "Specifies the gateway router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "dns-server 192.168.22.11",
"cmd": "dns-server 192.168.22.11",
"desc": "Specifies the IP address of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "lease 1 0 0",
"cmd": "lease 1 0 0",
"desc": "TACACS service (port 49)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip helper- address 10.1.1.1",
"cmd": "ip helper- address 10.1.1.1",
"desc": "DHCP server at 10.1.1.1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "no ip forward- protocol udp 37",
"cmd": "no ip forward- protocol udp 37",
"desc": "UDP time services using port 37"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip forward- protocol udp 5858",
"cmd": "ip forward- protocol udp 5858",
"desc": "Enters GigabitEthernet 0/0 interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip address dhcp",
"cmd": "ip address dhcp",
"desc": "Verifying and Troubleshooting DHCP Configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp binding",
"cmd": "show ip dhcp binding",
"desc": "Displays a list of all bindings"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp",
"cmd": "show ip dhcp",
"desc": "Clears an automatic address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "clear ip dhcp binding *",
"cmd": "clear ip dhcp binding *",
"desc": "Clears all automatic DHCP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp conflict",
"cmd": "show ip dhcp conflict",
"desc": "Displays a list of all address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "clear ip dhcp",
"cmd": "clear ip dhcp",
"desc": "Clears an address conflict from"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "clear ip dhcp conflict *",
"cmd": "clear ip dhcp conflict *",
"desc": "Clears conflicts for all addresses"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp database",
"cmd": "show ip dhcp database",
"desc": "Displays information about DHCP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp pool",
"cmd": "show ip dhcp pool",
"desc": "DHCP pool named name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp pool name",
"cmd": "show ip dhcp pool name",
"desc": "DHCP pool named name"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp interface",
"cmd": "show ip dhcp interface",
"desc": "Displays interface on which DHCP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ip dhcp server statistics",
"cmd": "show ip dhcp server statistics",
"desc": "Displays a list of the number of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "clear ip dhcp server statistics",
"cmd": "clear ip dhcp server statistics",
"desc": "Resets all DHCP server counters"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "debug ip dhcp linkage | class}",
"cmd": "debug ip dhcp linkage | class}",
"desc": "Displays the DHCP process of"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "debug ip dhcp server events",
"cmd": "debug ip dhcp server events",
"desc": "Enters global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "debug ip dhcp server packets",
"cmd": "debug ip dhcp server packets",
"desc": "Enters global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp pool STATELESS",
"cmd": "ipv6 dhcp pool STATELESS",
"desc": "DHCPv6 client"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp pool STATEFULDHCPv6",
"cmd": "ipv6 dhcp pool STATEFULDHCPv6",
"desc": "DHCPv6 client"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface interfaceid",
"cmd": "interface interfaceid",
"desc": "DHCPv6 client"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 address dhcp",
"cmd": "ipv6 address dhcp",
"desc": "DHCPv6 client"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "dns-server 2001:db8:3000:3000::42",
"cmd": "dns-server 2001:db8:3000:3000::42",
"desc": "Specifies an interface type and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 nd other-config-flag",
"cmd": "ipv6 nd other-config-flag",
"desc": "Leaves DHCPv6 configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 nd managedconfig-flag",
"cmd": "ipv6 nd managedconfig-flag",
"desc": "The no-autoconfig keyword sets the A flag"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp server STATEFUL-DHCPv6",
"cmd": "ipv6 dhcp server STATEFUL-DHCPv6",
"desc": "Enables the interface to acquire an IPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 address dhcp rapid-commit",
"cmd": "ipv6 address dhcp rapid-commit",
"desc": "Verifying and Troubleshooting DHCPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ipv6 dhcp binding",
"cmd": "show ipv6 dhcp binding",
"desc": "Displays the IPv6 to MAC address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ipv6 dhcp pool",
"cmd": "show ipv6 dhcp pool",
"desc": "Displays DHCPv6 pool statistics"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "show ipv6 dhcp interface",
"cmd": "show ipv6 dhcp interface",
"desc": "Displays interface on which DHCPv6"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "debug ipv6 dhcp",
"cmd": "debug ipv6 dhcp",
"desc": "Enables DHCPv6 debugging"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "debug ipv6 dhcp relay",
"cmd": "debug ipv6 dhcp relay",
"desc": "Sets the local description of the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 10.0.0.1 255.0.0.0",
"cmd": "ip address 10.0.0.1 255.0.0.0",
"desc": "Creates a static route to the destination network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 192.168.1.2 255.255.255.252",
"cmd": "ip address 192.168.1.2 255.255.255.252",
"desc": "Creates a static route to the destination network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip address 192.168.1.1 255.255.255.252",
"cmd": "ip address 192.168.1.1 255.255.255.252",
"desc": "Creates a static route to the destination network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 enable",
"cmd": "ipv6 enable",
"desc": "Creates a static route to the destination network"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "service dhcp",
"cmd": "service dhcp",
"desc": "Verifies that the router can use DHCP services"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip dhcp pool 10NETWORK",
"cmd": "ip dhcp pool 10NETWORK",
"desc": "Defines the domain name for clients"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "lease 12 14 30",
"cmd": "lease 12 14 30",
"desc": "Specifies the range of addresses not to be leased"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip dhcp pool 192.168.3NETWORK",
"cmd": "ip dhcp pool 192.168.3NETWORK",
"desc": "Creates a DHCP pool called"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "network 192.168.3.0 255.255.255.0",
"cmd": "network 192.168.3.0 255.255.255.0",
"desc": "Assigns an IP address and netmask"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip helper-address 192.168.1.2",
"cmd": "ip helper-address 192.168.1.2",
"desc": "Enables IPv6 routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp pool EDMONTONLAN",
"cmd": "ipv6 dhcp pool EDMONTONLAN",
"desc": "Edmonton LAN. Since this pool is used"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "dns-server 2001:db8:10:1::3",
"cmd": "dns-server 2001:db8:10:1::3",
"desc": "Exits the EDMONTONLAN pool"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp pool GIBBONSLAN",
"cmd": "ipv6 dhcp pool GIBBONSLAN",
"desc": "Enables IPv6 functions"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address",
"cmd": "ipv6 address",
"desc": "Assigns an IPv6 address and prefix"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address 2001:db8:192:1::2/64",
"cmd": "ipv6 address 2001:db8:192:1::2/64",
"desc": "Assigns an IPv6 address and prefix"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address 2001:db8:192:3::1/64",
"cmd": "ipv6 address 2001:db8:192:3::1/64",
"desc": "Assigns an IPv6 address and prefix"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address 2001:db8:192:1::1/64",
"cmd": "ipv6 address 2001:db8:192:1::1/64",
"desc": "Assigns an IPv6 address and prefix"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 address autoconfig default",
"cmd": "ipv6 address autoconfig default",
"desc": "Assigns an IPv6 address and prefix"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ipv6 nd other-configflag",
"cmd": "ipv6 nd other-configflag",
"desc": "Sets the Other Configuration flag to 1 for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp server EDMONTONLAN",
"cmd": "ipv6 dhcp server EDMONTONLAN",
"desc": "Assigns an IP address and prefix length"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ipv6 dhcp server GIBBONSLAN",
"cmd": "ipv6 dhcp server GIBBONSLAN",
"desc": "DLS-2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "ipv6 dhcp relay destination 2001:db8:192:1::2",
"cmd": "ipv6 dhcp relay destination 2001:db8:192:1::2",
"desc": "DLS-2"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "enable password cisco",
"cmd": "enable password cisco",
"desc": "Sets the enable password. This password"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "enable secret class",
"cmd": "enable secret class",
"desc": "Sets the enable secret password. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "enable algorithm-type sha256 secret class",
"cmd": "enable algorithm-type sha256 secret class",
"desc": "Sets the enable secret password using the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "enable algorithm-type scrypt secret class",
"cmd": "enable algorithm-type scrypt secret class",
"desc": "Enters console line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "password cisco12345",
"cmd": "password cisco12345",
"desc": "Sets the console line mode password to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "line vty 0 4",
"cmd": "line vty 0 4",
"desc": "Enters auxiliary line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "line aux 0",
"cmd": "line aux 0",
"desc": "Enters auxiliary line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "no exec",
"cmd": "no exec",
"desc": "Enters auxiliary line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "password backdoor",
"cmd": "password backdoor",
"desc": "Cleartext Password Encryption"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "service password-encryption",
"cmd": "service password-encryption",
"desc": "Type 9: Specifies a scrypt hashed secret (SCRYPT)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "no service passwordencryption",
"cmd": "no service passwordencryption",
"desc": "Type 9: Specifies a scrypt hashed secret (SCRYPT)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "username demo5 secret cisco",
"cmd": "username demo5 secret cisco",
"desc": "Either option generates"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "username demo5 algorithm-type md5 secret cisco",
"cmd": "username demo5 algorithm-type md5 secret cisco",
"desc": "Generates password encrypted"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "username demo8 algorithm-type sha256 secret cisco",
"cmd": "username demo8 algorithm-type sha256 secret cisco",
"desc": "Generates password encrypted"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "username demo9 algorithm-type scrypt secret cisco",
"cmd": "username demo9 algorithm-type scrypt secret cisco",
"desc": "Verifying SSH"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "show ip ssh",
"cmd": "show ip ssh",
"desc": "Verifies that SSH is enabled"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "show ssh",
"cmd": "show ssh",
"desc": "CONFIGURING PASSWORDS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "boot system flash imagename",
"cmd": "boot system flash imagename",
"desc": "Loads the Cisco IOS Software with imagename"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "boot system rom",
"cmd": "boot system rom",
"desc": "Loads the Cisco IOS Software from ROM"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "show file systems",
"cmd": "show file systems",
"desc": "Saves the running configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "copy runningconfig tftp",
"cmd": "copy runningconfig tftp",
"desc": "VIEWING THE CISCO IOS FILE SYSTEM"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "copy tftp runningconfig",
"cmd": "copy tftp runningconfig",
"desc": "SERVER"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "copy flash: tftp:",
"cmd": "copy flash: tftp:",
"desc": "SERVER"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "copy tftp: flash:",
"cmd": "copy tftp: flash:",
"desc": "Moves to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa new-model",
"cmd": "aaa new-model",
"desc": "Sets AAA authentication at login"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authentication login default local",
"cmd": "aaa authentication login default local",
"desc": "Enables the AAA access control system. In"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authorization exec default local",
"cmd": "aaa authorization exec default local",
"desc": "Sets parameters that restrict user access to a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "username superuser privilege 15 secret superpassword",
"cmd": "username superuser privilege 15 secret superpassword",
"desc": "Creates a local username/password"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "ip scp server enable",
"cmd": "ip scp server enable",
"desc": "Verifying and Troubleshooting SCP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "show runningconfig",
"cmd": "show runningconfig",
"desc": "SCP server is enabled and visible in the running"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug ip scp",
"cmd": "debug ip scp",
"desc": "The following example shows the commands for using SCP to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "copy flash: scp:",
"cmd": "copy flash: scp:",
"desc": "FROM A TFTP SERVER"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "copy flash:isr4300-universalk9.16.09.04.SPA.bin scp://superuser@192.16",
"cmd": "copy flash:isr4300-universalk9.16.09.04.SPA.bin scp://superuser@192.168.119.20/",
"desc": "DNS name resolution"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "no ip domain lookup",
"cmd": "no ip domain lookup",
"desc": "Cisco Discovery Protocol"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "no cdp run",
"cmd": "no cdp run",
"desc": "CDP (on a specific interface)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "no cdp enable",
"cmd": "no cdp enable",
"desc": "Network Time Protocol (NTP)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NTP",
"title": "ntp",
"cmd": "ntp",
"desc": "BOOTP server"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "System",
"title": "no ip bootp server",
"cmd": "no ip bootp server",
"desc": "FROM A TFTP SERVER"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "no service dhcp",
"cmd": "no service dhcp",
"desc": "Protocol (ARP)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "no ip proxy-arp",
"cmd": "no ip proxy-arp",
"desc": "IP source routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "no ip source-route",
"cmd": "no ip source-route",
"desc": "IP redirects"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "no ip redirects",
"cmd": "no ip redirects",
"desc": "HTTP service"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "no ip http server",
"cmd": "no ip http server",
"desc": "HTTPS service"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "no ip http secure-server",
"cmd": "no ip http secure-server",
"desc": "The following commands are useful options available when using"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip ftp sourceinterface",
"cmd": "ip ftp sourceinterface",
"desc": "Sets the base HTTP path for HTML files"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "DHCP",
"title": "ip http maxconnections 10",
"cmd": "ip http maxconnections 10",
"desc": "DHCP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip access-group 1 in",
"cmd": "ip access-group 1 in",
"desc": "Applies ACL 1 on the interface as an"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip access-group MyFilter in",
"cmd": "ip access-group MyFilter in",
"desc": "Applies ACL 1 on the interface as an"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip access-group 120 in",
"cmd": "ip access-group 120 in",
"desc": "Applies ACL 1 on the interface as an"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip access-group MyExtFilter in",
"cmd": "ip access-group MyExtFilter in",
"desc": "Applies ACL 1 on the interface as an"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip access-group 1 out",
"cmd": "ip access-group 1 out",
"desc": "Named Standard IPv4 ACL"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-list standard MyFilter",
"cmd": "ip access-list standard MyFilter",
"desc": "Applies ACL MyFilter on the interface as"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip access-group MyFilter out",
"cmd": "ip access-group MyFilter out",
"desc": "Infrastructure Security"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "no ip access-list standard MyFilter",
"cmd": "no ip access-list standard MyFilter",
"desc": "Infrastructure Security"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 120 permit tcp 192.168.1.0 0.0.0.255 any eq www",
"cmd": "access-list 120 permit tcp 192.168.1.0 0.0.0.255 any eq www",
"desc": "Permits HTTP traffic that matches any source"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 120 permit udp 192.168.1.0 0.0.0.255 any eq domain",
"cmd": "access-list 120 permit udp 192.168.1.0 0.0.0.255 any eq domain",
"desc": "Permits DNS traffic that matches any source"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 120",
"cmd": "access-list 120",
"desc": "Permits all IPv4 traffic that matches any"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 120 deny tcp any host 209.165.201.1 eq ftp",
"cmd": "access-list 120 deny tcp any host 209.165.201.1 eq ftp",
"desc": "Denies FTP traffic that matches any source"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 120 permit tcp any eq 443 10.0.0.0 0.0.0.255 established",
"cmd": "access-list 120 permit tcp any eq 443 10.0.0.0 0.0.0.255 established",
"desc": "Permits HTTPS replies from any source to any"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "no access-list 120",
"cmd": "no access-list 120",
"desc": "Applies ACL 120 on the interface as an"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-group 120 out",
"cmd": "ip access-group 120 out",
"desc": "Named Extended IPv4 ACL"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-list extended MyExtFilter",
"cmd": "ip access-list extended MyExtFilter",
"desc": "Applies ACL MyExtFilter on the interface as"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "no ip access-list extended MyExtFilter",
"cmd": "no ip access-list extended MyExtFilter",
"desc": "It is also possible to use the following with"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip accesslist extended MyTimeACL",
"cmd": "ip accesslist extended MyTimeACL",
"desc": "Enters interface configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-group MyTimedACL out",
"cmd": "ip access-group MyTimedACL out",
"desc": "Permits any traffic with a source"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ipv6 access-list v6Filter",
"cmd": "ipv6 access-list v6Filter",
"desc": "Enters GigabitEthernet 0/0/0 interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ipv6 traffic-filter v6Filter in",
"cmd": "ipv6 traffic-filter v6Filter in",
"desc": "Applies the IPv6 access list named v6Filter"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "no ipv6 access-list v6Filter",
"cmd": "no ipv6 access-list v6Filter",
"desc": "It is important to understand that any explicit deny ipv6 any any"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show ip interface interfacetype interface-number",
"cmd": "show ip interface interfacetype interface-number",
"desc": "Displays the contents of all ACLs on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show ipv6 interface interfacetype interface-number",
"cmd": "show ipv6 interface interfacetype interface-number",
"desc": "Displays the contents of all ACLs on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show accesslists",
"cmd": "show accesslists",
"desc": "Displays the contents of all ACLs on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show ip accesslists",
"cmd": "show ip accesslists",
"desc": "Displays the contents of all IPv4 ACLs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show ipv6 access-lists",
"cmd": "show ipv6 access-lists",
"desc": "Displays the contents of all IPv6 ACLs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "show accesslists 1",
"cmd": "show accesslists 1",
"desc": "Creates an entry in the local database with a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "login local",
"cmd": "login local",
"desc": "AAA-based Local Database Authentication"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "username ADMIN privilege 15 secret cisco123",
"cmd": "username ADMIN privilege 15 secret cisco123",
"desc": "Enables AAA access control mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authentication login default localcase enable",
"cmd": "aaa authentication login default localcase enable",
"desc": "Enters the vty line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "radius-server host 192.168.55.12 auth-port 1812 acct-port 1813 key S3C",
"cmd": "radius-server host 192.168.55.12 auth-port 1812 acct-port 1813 key S3CR3TKEY",
"desc": "Enters the vty line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "radius server RADSRV",
"cmd": "radius server RADSRV",
"desc": "Enters the vty line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authentication login TACSRV group tacacs+ local",
"cmd": "aaa authentication login TACSRV group tacacs+ local",
"desc": "Enters the vty line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "tacacs server TACSRV",
"cmd": "tacacs server TACSRV",
"desc": "Enters the vty line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "login authentication VTY-Lines",
"cmd": "login authentication VTY-Lines",
"desc": "Enters Console 0 configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "login authentication default",
"cmd": "login authentication default",
"desc": "RADIUS Authentication"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "username admin secret cisco",
"cmd": "username admin secret cisco",
"desc": "Specifies a RADIUS server at 192.168.55.12"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authentication login default group radius local line",
"cmd": "aaa authentication login default group radius local line",
"desc": "Specifies the AAA service to use the default"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "password S3cr3Tw0Rd",
"cmd": "password S3cr3Tw0Rd",
"desc": "Moves to console 0 configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "login authentication NO_AUTH",
"cmd": "login authentication NO_AUTH",
"desc": "Configures the IPv4 address for the RADIUS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "login authentication",
"cmd": "login authentication",
"desc": "Configures the IPv4 address for the RADIUS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "key C1sc0",
"cmd": "key C1sc0",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "ip radius sourceinterface gigabitethernet 0/0/0",
"cmd": "ip radius sourceinterface gigabitethernet 0/0/0",
"desc": "Forces RADIUS to use the IP address of a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authentication login RAD_LIST group RADSRVGRP local",
"cmd": "aaa authentication login RAD_LIST group RADSRVGRP local",
"desc": "Forces RADIUS to use the IP address of a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa group server tacacs+ TACSRVGRP",
"cmd": "aaa group server tacacs+ TACSRVGRP",
"desc": "Forces RADIUS to use the IP address of a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "server name TACSRV",
"cmd": "server name TACSRV",
"desc": "Forces RADIUS to use the IP address of a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authentication login TAC_LIST group TACSRVGRP local",
"cmd": "aaa authentication login TAC_LIST group TACSRVGRP local",
"desc": "Forces RADIUS to use the IP address of a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa group server radius RADSRVGRP",
"cmd": "aaa group server radius RADSRVGRP",
"desc": "IPV6 ACLS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "server name RADSRV",
"cmd": "server name RADSRV",
"desc": "Moves to vty line configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "authentication RAD_LIST",
"cmd": "authentication RAD_LIST",
"desc": "After AAA has been enabled on a Cisco IOS device and AAA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "login authentication TAC_LIST",
"cmd": "login authentication TAC_LIST",
"desc": "After AAA has been enabled on a Cisco IOS device and AAA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa authorization exec default group radius group tacacs+ local",
"cmd": "aaa authorization exec default group radius group tacacs+ local",
"desc": "Configuring accounting is also a two-step process. First define a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "aaa accounting exec default start-stop group radius",
"cmd": "aaa accounting exec default start-stop group radius",
"desc": "Troubleshooting AAA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "debug aaa authentication",
"cmd": "debug aaa authentication",
"desc": "Enables debugging of the AAA"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "debug aaa authorization",
"cmd": "debug aaa authorization",
"desc": "RADSRVGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "debug aaa accounting",
"cmd": "debug aaa accounting",
"desc": "RADSRVGRP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-list extended copp-routing-acl",
"cmd": "ip access-list extended copp-routing-acl",
"desc": "Exits named ACL"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-list extended copp-management-acl",
"cmd": "ip access-list extended copp-management-acl",
"desc": "Step 2: Define Class Maps for Matched Traffic"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "ip access-list extended copp-icmp-acl",
"cmd": "ip access-list extended copp-icmp-acl",
"desc": "Step 2: Define Class Maps for Matched Traffic"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "class-map match-all copp-routing-map",
"cmd": "class-map match-all copp-routing-map",
"desc": "Creates a class map called copprouting-map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "match access-group name copprouting-acl",
"cmd": "match access-group name copprouting-acl",
"desc": "Creates a class map called coppmanagement-map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "match access-group name coppmanagement-acl",
"cmd": "match access-group name coppmanagement-acl",
"desc": "Creates a class map called coppicmp-map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "match access-group name copp-icmpacl",
"cmd": "match access-group name copp-icmpacl",
"desc": "Step 3: Define a Policy Map to Police Matched Traffic"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "policy-map copp-policy",
"cmd": "policy-map copp-policy",
"desc": "Creates a CoPP policy called copppolicy"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "class copp-routing-map",
"cmd": "class copp-routing-map",
"desc": "Assigns the CoPP routing class map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "police 1000000 conformaction transmit exceedaction drop",
"cmd": "police 1000000 conformaction transmit exceedaction drop",
"desc": "Polices up to 1 Mbps any routing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "class coppmanagement-map",
"cmd": "class coppmanagement-map",
"desc": "Assigns the CoPP management class"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "police 100000 conformaction transmit exceedaction drop",
"cmd": "police 100000 conformaction transmit exceedaction drop",
"desc": "Polices up to 100 Kbps any"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "class copp-icmpmap",
"cmd": "class copp-icmpmap",
"desc": "Assigns the CoPP ICMP class map to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "police 50000 conformaction transmit exceedaction drop",
"cmd": "police 50000 conformaction transmit exceedaction drop",
"desc": "Polices up to 50 Kbps any ICMP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "class classdefault",
"cmd": "class classdefault",
"desc": "Assigns the CoPP default class map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "police 8000 conform-action transmit exceed-action drop",
"cmd": "police 8000 conform-action transmit exceed-action drop",
"desc": "Step 4: Assign a Policy Map to the Control Plane"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "control-plane",
"cmd": "control-plane",
"desc": "Displays all configured ACLs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "show class-map",
"cmd": "show class-map",
"desc": "Displays all configured class maps"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "show policy-map",
"cmd": "show policy-map",
"desc": "Displays all configured policy maps"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "show policy-map controlplane",
"cmd": "show policy-map controlplane",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip verify unicast source reachable-via rx",
"cmd": "ip verify unicast source reachable-via rx",
"desc": "Enables uRPF strict mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip verify unicast source reachable-via any",
"cmd": "ip verify unicast source reachable-via any",
"desc": "Enables uRPF loose mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip verify unicast source reachable-via rx 120",
"cmd": "ip verify unicast source reachable-via rx 120",
"desc": "ACL applied to bypass the drop"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "ip verify unicast source reachable-via",
"cmd": "ip verify unicast source reachable-via",
"desc": "Verifying and Troubleshooting uRPF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "debug ip cef drops rpf",
"cmd": "debug ip cef drops rpf",
"desc": "Displays information about dropped"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "show ip traffic",
"cmd": "show ip traffic",
"desc": "Displays information about uRPF drops"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Security",
"title": "show cef interface",
"cmd": "show cef interface",
"desc": "CONTROL PLANE POLICING (COPP)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip redirects",
"cmd": "ip redirects",
"desc": "Network Assurance"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ping w.x.y.z",
"cmd": "ping w.x.y.z",
"desc": "Checks for Layer 3 connectivity with the device"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "ping aaaa:aaaa: aaaa:aaaa:aaaa:aaa a: aaaa:aaaa",
"cmd": "ping aaaa:aaaa: aaaa:aaaa:aaaa:aaa a: aaaa:aaaa",
"desc": "THE PING COMMAND"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ping 172.16.20.1 source loopback 1",
"cmd": "ping 172.16.20.1 source loopback 1",
"desc": "THE PING COMMAND"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ping 2001::1 source loopback 1",
"cmd": "ping 2001::1 source loopback 1",
"desc": "THE PING COMMAND"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ping 172.16.20.1",
"cmd": "ping 172.16.20.1",
"desc": "Performs a basic Layer 3 test to IPv4"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ping paris",
"cmd": "ping paris",
"desc": "Same as above but through the IP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ping 2001:db8:d1a5:c900::2",
"cmd": "ping 2001:db8:d1a5:c900::2",
"desc": "The traceroute command (or tracert in Microsoft Windows) is a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "traceroute paris",
"cmd": "traceroute paris",
"desc": "Shows command with IP host name rather"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "traceroute 2001:db8:d1a5:c900:: 2",
"cmd": "traceroute 2001:db8:d1a5:c900:: 2",
"desc": "PING COMMANDS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug condition interface interface-type interface number",
"cmd": "debug condition interface interface-type interface number",
"desc": "Filters output on the basis"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug condition ip",
"cmd": "debug condition ip",
"desc": "Filters messages on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug condition macaddress",
"cmd": "debug condition macaddress",
"desc": "Filters messages on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug condition vlan",
"cmd": "debug condition vlan",
"desc": "Filters messages on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show debug condition",
"cmd": "show debug condition",
"desc": "Filters messages on the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug condition username",
"cmd": "debug condition username",
"desc": "Simple Network Management Protocol (SNMP) is the most"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "no snmp-server",
"cmd": "no snmp-server",
"desc": "Securing SNMPv3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 99 permit 10.1.1.0 0.0.0.255",
"cmd": "access-list 99 permit 10.1.1.0 0.0.0.255",
"desc": "SNMP access to the local device from SNMP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server view MGMT sysUpTime included",
"cmd": "snmp-server view MGMT sysUpTime included",
"desc": "Defines an SNMP view named MGMT to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server view MGMT ifDescr included",
"cmd": "snmp-server view MGMT ifDescr included",
"desc": "OID name of ifAdminStatus. This OID is"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server view MGMT ifAdminStatus included",
"cmd": "snmp-server view MGMT ifAdminStatus included",
"desc": "OID name of ifAdminStatus. This OID is"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server view MGMT ifOperStatus included",
"cmd": "snmp-server view MGMT ifOperStatus included",
"desc": "SNMPv3 group groupAAA with"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server enable traps",
"cmd": "snmp-server enable traps",
"desc": "Enables SNMP traps"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server host 10.1.1.50 traps version 3 priv userAAA cpu portsecuri",
"cmd": "snmp-server host 10.1.1.50 traps version 3 priv userAAA cpu portsecurity",
"desc": "Defines a receiving manager for traps at IP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "snmp-server ifindex persist",
"cmd": "snmp-server ifindex persist",
"desc": "Verifying SNMP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "show snmp",
"cmd": "show snmp",
"desc": "Provides basic information about SNMP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "show snmp view",
"cmd": "show snmp view",
"desc": "Provides information about SNMP views"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "show snmp group",
"cmd": "show snmp group",
"desc": "SNMP groups"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "SNMP",
"title": "show snmp user",
"cmd": "show snmp user",
"desc": "It is important for network administrators to implement logging to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Logging",
"title": "logging on",
"cmd": "logging on",
"desc": "Syslog Message Example"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip flow ingress",
"cmd": "ip flow ingress",
"desc": "Enables NetFlow on the interface. Captures"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip flow egress",
"cmd": "ip flow egress",
"desc": "Returns to global configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip flow-export",
"cmd": "ip flow-export",
"desc": "Flexible NetFlow improves on original NetFlow by adding the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "flow record R1FLOW-RECORD",
"cmd": "flow record R1FLOW-RECORD",
"desc": "CONDITIONALLY TRIGGERED DEBUGS"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "match ipv4 source address",
"cmd": "match ipv4 source address",
"desc": "Includes the source IPv4"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "match ipv4 destination address",
"cmd": "match ipv4 destination address",
"desc": "Step 2: Configure a Flow Exporter"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "flow exporter R1FLOW-EXPORTER",
"cmd": "flow exporter R1FLOW-EXPORTER",
"desc": "Step 3: Configure a Flow Monitor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "flow monitor R1FLOW-MONITOR",
"cmd": "flow monitor R1FLOW-MONITOR",
"desc": "Step 4: Apply the Flow Monitor to an Interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "ip flow monitor R1-FLOW-MONITOR input",
"cmd": "ip flow monitor R1-FLOW-MONITOR input",
"desc": "R1-FLOW-RECORD"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show ip interface gigabitethernet 0/0/0",
"cmd": "show ip interface gigabitethernet 0/0/0",
"desc": "Verifies status and statistics for NetFlow"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show ip flow export",
"cmd": "show ip flow export",
"desc": "Verifies status and statistics for NetFlow"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show ip cache flow",
"cmd": "show ip cache flow",
"desc": "Displays a summary of NetFlow statistics"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show flow monitor",
"cmd": "show flow monitor",
"desc": "NetFlow configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show flow exporter",
"cmd": "show flow exporter",
"desc": "NetFlow exporter configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "show flow record",
"cmd": "show flow record",
"desc": "Configuration Example: Local SPAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "no monitor session 1",
"cmd": "no monitor session 1",
"desc": "Removes any existing SPAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "no monitor session all",
"cmd": "no monitor session all",
"desc": "Removes all SPAN sessions"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "no monitor session local",
"cmd": "no monitor session local",
"desc": "Removes all local SPAN sessions"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "no monitor session remote",
"cmd": "no monitor session remote",
"desc": "Removes all remote SPAN sessions"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "monitor session 1 source interface gigabitethernet 0/1",
"cmd": "monitor session 1 source interface gigabitethernet 0/1",
"desc": "Sets a new SPAN session where the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "monitor session 2 source gigabitethernet 0/2 rx",
"cmd": "monitor session 2 source gigabitethernet 0/2 rx",
"desc": "Configures session 2 to monitor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "monitor session 2 destination interface gigabitethernet 0/24 encapsula",
"cmd": "monitor session 2 destination interface gigabitethernet 0/24 encapsulation",
"desc": "Configures session 2 to monitor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "monitor",
"cmd": "monitor",
"desc": "You can use the monitor session"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 filter vlan 6 10",
"cmd": "monitor session 1 filter vlan 6 10",
"desc": "VLANs 6 to 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "monitor session session_number",
"cmd": "monitor session session_number",
"desc": "Options for this command include"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "monitor session 1 destination interface gigabitethernet 0/24 encapsula",
"cmd": "monitor session 1 destination interface gigabitethernet 0/24 encapsulation replicate",
"desc": "Configuration Example: Remote SPAN"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 901",
"cmd": "vlan 901",
"desc": "VERIFYING NETFLOW"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 source interface gigabitethernet 0/1 tx",
"cmd": "monitor session 1 source interface gigabitethernet 0/1 tx",
"desc": "Configures session 1 to monitor"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 source remote vlan 901",
"cmd": "monitor session 1 source remote vlan 901",
"desc": "Configures session 1 to monitor"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 source interface gigabitethernet 0/2 rx",
"cmd": "monitor session 1 source interface gigabitethernet 0/2 rx",
"desc": "Configures session 1 to have a"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 destination remote vlan 901",
"cmd": "monitor session 1 destination remote vlan 901",
"desc": "Configures session 1 to have a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 destination interface gigabitethernet 0/24",
"cmd": "monitor session 1 destination interface gigabitethernet 0/24",
"desc": "ERSPAN Source Configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 type erspansource",
"cmd": "monitor session 1 type erspansource",
"desc": "Assigns an ERSPAN ID of 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ip address 2.2.2.2",
"cmd": "ip address 2.2.2.2",
"desc": "ERSPAN Destination Configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "monitor session 1 type erspandestination",
"cmd": "monitor session 1 type erspandestination",
"desc": "Verifying and Troubleshooting Local and Remote SPAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show monitor session 1",
"cmd": "show monitor session 1",
"desc": "On some platforms the command is show monitor"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show vlan remote-span",
"cmd": "show vlan remote-span",
"desc": "Displays information about VLANs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug",
"cmd": "debug",
"desc": "Displays all SPAN debugging messages"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug monitor list",
"cmd": "debug monitor list",
"desc": "Displays SPAN port and VLAN list tracing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug monitor requests",
"cmd": "debug monitor requests",
"desc": "Most networks today are being designed with high performance"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 209.165.200.254",
"cmd": "ntp server 209.165.200.254",
"desc": "Configures an IOS device to synchronize its"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp peer 172.16.21.1 source loopback 0",
"cmd": "ntp peer 172.16.21.1 source loopback 0",
"desc": "Makes this peer the preferred peer that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp peer 172.16.21.1 source loopback 0 prefer",
"cmd": "ntp peer 172.16.21.1 source loopback 0 prefer",
"desc": "You can secure NTP operation using authentication and access"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp authenticationkey 1 md5 NTPpa55word",
"cmd": "ntp authenticationkey 1 md5 NTPpa55word",
"desc": "Verifying and Troubleshooting NTP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show ntp associations",
"cmd": "show ntp associations",
"desc": "Displays the status of NTP associations"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show ntp status",
"cmd": "show ntp status",
"desc": "Displays the status of the NTP configuration. This"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ip packets",
"cmd": "debug ip packets",
"desc": "Checks to see whether NTP packets are received and"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ip packet 1",
"cmd": "debug ip packet 1",
"desc": "Limits debug output to ACL 1"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ntp adjust",
"cmd": "debug ntp adjust",
"desc": "Displays debug output for NTP clock adjustments"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ntp all",
"cmd": "debug ntp all",
"desc": "Displays all NTP debugging output"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ntp events",
"cmd": "debug ntp events",
"desc": "Displays all NTP debugging events"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ntp packet",
"cmd": "debug ntp packet",
"desc": "Displays detailed NTP packet dump"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ntp packet detail",
"cmd": "debug ntp packet detail",
"desc": "Displays detailed NTP packet dump"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug ntp",
"cmd": "debug ntp",
"desc": "Manually sets the system hardware"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show calendar",
"cmd": "show calendar",
"desc": "Updates the hardware clock from the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show clock",
"cmd": "show clock",
"desc": "Displays the time and date from the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show clock detail",
"cmd": "show clock detail",
"desc": "Using Time Stamps"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "service timestamps",
"cmd": "service timestamps",
"desc": "Adds a time stamp to all system"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "service timestamps debug",
"cmd": "service timestamps debug",
"desc": "Adds a time stamp to all debugging"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "service timestamps debug uptime",
"cmd": "service timestamps debug uptime",
"desc": "Adds a time stamp along with the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "service timestamps debug datetime localtime",
"cmd": "service timestamps debug datetime localtime",
"desc": "Adds a time stamp displaying the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "no service timestamps",
"cmd": "no service timestamps",
"desc": "Core1 Router"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 209.165.201.44",
"cmd": "ntp server 209.165.201.44",
"desc": "Configures router to synchronize its"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 209.165.201.111",
"cmd": "ntp server 209.165.201.111",
"desc": "Configures the system to automatically"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 209.165.201.222",
"cmd": "ntp server 209.165.201.222",
"desc": "Configures the system to automatically"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 209.165.201.233 prefer",
"cmd": "ntp server 209.165.201.233 prefer",
"desc": "Configures the system to automatically"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp maxassociations 200",
"cmd": "ntp maxassociations 200",
"desc": "Configures the system to automatically"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 209.165.201.133",
"cmd": "ntp server 209.165.201.133",
"desc": "Configures the system to automatically"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp master 10",
"cmd": "ntp master 10",
"desc": "Configures the router to serve as a"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp source Loopback 0",
"cmd": "ntp source Loopback 0",
"desc": "Sets access list 2 to permit packets"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp access-group peer 1",
"cmd": "ntp access-group peer 1",
"desc": "Configures Core1 to peer with any"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp access-group serve-only 2",
"cmd": "ntp access-group serve-only 2",
"desc": "Sets the source of all NTP"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 192.168.223.1",
"cmd": "ntp server 192.168.223.1",
"desc": "Configures DLSwitch1 to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "ntp server 192.168.224.1",
"cmd": "ntp server 192.168.224.1",
"desc": "Using an EEM applet to call Tcl scripts is another very powerful"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "event manager run myping",
"cmd": "event manager run myping",
"desc": "Verifying EEM"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "debug event manager action cli",
"cmd": "debug event manager action cli",
"desc": "Displays actual actions taking place"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show event manager policy registered",
"cmd": "show event manager policy registered",
"desc": "VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "show event manager version",
"cmd": "show event manager version",
"desc": "VLAN"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "AAA > RADIUS > Authentication and enter the",
"cmd": "AAA > RADIUS > Authentication and enter the",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "AAA",
"title": "AAA > RADIUS >",
"cmd": "AAA > RADIUS >",
"desc": "Displays a summary of clients associated with"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show wireless client summary",
"cmd": "show wireless client summary",
"desc": "Displays client information learned through"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show wireless client mac-address macaddress detail",
"cmd": "show wireless client mac-address macaddress detail",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show wireless client ap name ap-name dot11 {24ghz | 5ghz}",
"cmd": "show wireless client ap name ap-name dot11 {24ghz | 5ghz}",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show ap dot11 {24ghz | 5ghz} network",
"cmd": "show ap dot11 {24ghz | 5ghz} network",
"desc": "Displays AP detailed configuration settings by"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show ap dot11 {24ghz | 5ghz} summary",
"cmd": "show ap dot11 {24ghz | 5ghz} summary",
"desc": "Displays general AP configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show ap name ap-name config general",
"cmd": "show ap name ap-name config general",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show ap macaddress mac-",
"cmd": "show ap macaddress mac-",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show ap join stats summary",
"cmd": "show ap join stats summary",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Wireless",
"title": "show ap name ap-name wlan dot11 {24ghz | 5ghz }",
"cmd": "show ap name ap-name wlan dot11 {24ghz | 5ghz }",
"desc": "Wireless Security and Troubleshooting"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "interface tunnel 0",
"cmd": "interface tunnel 0",
"desc": "Configuring an IPv6 GRE Tunnel"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "interface tunnel 1",
"cmd": "interface tunnel 1",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VPN",
"title": "tunnel mode gre ipv6",
"cmd": "tunnel mode gre ipv6",
"desc": "Specifies the encapsulation protocol to be used in the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address 2001:db8:192:1 00::1/64",
"cmd": "ip address 2001:db8:192:1 00::1/64",
"desc": "Assigns an IPv6 address and subnet mask to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "tunnel source 2001:db8:209:2 01::1",
"cmd": "tunnel source 2001:db8:209:2 01::1",
"desc": "Overlay Tunnels and VRF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "tunnel source gigabitetherne t 0/0/0",
"cmd": "tunnel source gigabitetherne t 0/0/0",
"desc": "The tunnel source can be a physical interface or a loopback interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "tunnel destination 2001:db8:198:5 1::1",
"cmd": "tunnel destination 2001:db8:198:5 1::1",
"desc": "Identifies the remote destination IPv6 address"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "bandwidth 4096",
"cmd": "bandwidth 4096",
"desc": "Sets the tunnel keepalives to 3 seconds and the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 mtu 1400",
"cmd": "ipv6 mtu 1400",
"desc": "Verifying IPv4 and IPv6 GRE Tunnels"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "show interfaces tunnel number",
"cmd": "show interfaces tunnel number",
"desc": "Displays IPv4 information about"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "show ip interface tunnel number",
"cmd": "show ip interface tunnel number",
"desc": "Displays IPv4 information about"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "show ipv6 interface tunnel number",
"cmd": "show ipv6 interface tunnel number",
"desc": "Configuration Example: IPv4 and IPv6 GRE Tunnels with OSPFv3"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address 209.165.201.1 255.255.255.252",
"cmd": "ip address 209.165.201.1 255.255.255.252",
"desc": "Applies an IPv4 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address 10.1.1.1 255.255.255.0",
"cmd": "ip address 10.1.1.1 255.255.255.0",
"desc": "Applies an IPv4 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address 198.51.100.1 255.255.255.252",
"cmd": "ip address 198.51.100.1 255.255.255.252",
"desc": "Applies an IPv4 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address",
"cmd": "ip address",
"desc": "Applies an IPv4 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 address 2001:db8:209:201::1/64",
"cmd": "ipv6 address 2001:db8:209:201::1/64",
"desc": "Applies an IPv6 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 address 2001:db8:10:1::1/64",
"cmd": "ipv6 address 2001:db8:10:1::1/64",
"desc": "Applies an IPv6 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 address 2001:db8:198:51::1/64",
"cmd": "ipv6 address 2001:db8:198:51::1/64",
"desc": "Applies an IPv6 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 address 2001:db8:10:2::1/64",
"cmd": "ipv6 address 2001:db8:10:2::1/64",
"desc": "Applies an IPv6 address to the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip route 0.0.0.0 0.0.0.0 209.165.201.2",
"cmd": "ip route 0.0.0.0 0.0.0.0 209.165.201.2",
"desc": "Defines an IPv4 default route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip route 0.0.0.0 0.0.0.0 198.51.100.2",
"cmd": "ip route 0.0.0.0 0.0.0.0 198.51.100.2",
"desc": "Defines an IPv4 default route"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 route ::/0 2001:db8:209:201::2",
"cmd": "ipv6 route ::/0 2001:db8:209:201::2",
"desc": "Enters interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 route ::/0 2001:db8:198:51::2",
"cmd": "ipv6 route ::/0 2001:db8:198:51::2",
"desc": "Enters interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 address 2001:db8:192:100::1 /64",
"cmd": "ipv6 address 2001:db8:192:100::1 /64",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ipv6 address 2001:db8:192:100::2 /64",
"cmd": "ipv6 address 2001:db8:192:100::2 /64",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto map GREMAP",
"cmd": "crypto map GREMAP",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "tunnel protection ipsec profile GRE-PROFILE",
"cmd": "tunnel protection ipsec profile GRE-PROFILE",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "tunnel mode ipsec ipv4",
"cmd": "tunnel mode ipsec ipv4",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address 10.99.1.1 255.255.255.0",
"cmd": "ip address 10.99.1.1 255.255.255.0",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip address 10.99.1.101",
"cmd": "ip address 10.99.1.101",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp redirect",
"cmd": "ip nhrp redirect",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip vrf forwarding GUEST",
"cmd": "ip vrf forwarding GUEST",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "vrf forwarding STAFF",
"cmd": "vrf forwarding STAFF",
"desc": "Applies an IPv4 address to the interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "tunnel source gigabitethernet 0/0/0",
"cmd": "tunnel source gigabitethernet 0/0/0",
"desc": "Defines the physical source of the tunnel"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "tunnel destination 198.51.100.1",
"cmd": "tunnel destination 198.51.100.1",
"desc": "Defines the tunnel destination across the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "tunnel destination 2001:db8:198:51::1",
"cmd": "tunnel destination 2001:db8:198:51::1",
"desc": "Defines the tunnel destination across the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "tunnel destination 209.165.201.1",
"cmd": "tunnel destination 209.165.201.1",
"desc": "Defines the tunnel destination across the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "tunnel destination 2001:db8:209:201::1",
"cmd": "tunnel destination 2001:db8:209:201::1",
"desc": "Defines the tunnel destination across the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VPN",
"title": "tunnel mode gre ip",
"cmd": "tunnel mode gre ip",
"desc": "Enables GRE tunnel mode for IPv4. This is"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 101 permit gre host 192.168.1.1 host 192.168.1.2",
"cmd": "access-list 101 permit gre host 192.168.1.1 host 192.168.1.2",
"desc": "Defines the crypto ACL that"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "ACL",
"title": "access-list 101 permit gre host 192.168.1.2 host 192.168.1.1",
"cmd": "access-list 101 permit gre host 192.168.1.2 host 192.168.1.1",
"desc": "Step 2: Configure an ISAKMP Policy for IKE SA (repeat on CE2)"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto isakmp policy 1",
"cmd": "crypto isakmp policy 1",
"desc": "Numbers range from 1 to 1000"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "authentication preshare",
"cmd": "authentication preshare",
"desc": "Step 3: Configure PSKs"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto isakmp key secretkey address 198.51.100.1",
"cmd": "crypto isakmp key secretkey address 198.51.100.1",
"desc": "Defines a PSK for"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto isakmp key secretkey address 209.165.201.1",
"cmd": "crypto isakmp key secretkey address 209.165.201.1",
"desc": "Step 4: Create a Transform Set (repeat on CE2)"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto ipsec transform-set GRE-SEC esp-aes 256 esp-sha256-hmac",
"cmd": "crypto ipsec transform-set GRE-SEC esp-aes 256 esp-sha256-hmac",
"desc": "Enables transport mode to avoid double"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto map GREMAP 1 ipsecisakmp",
"cmd": "crypto map GREMAP 1 ipsecisakmp",
"desc": "A message will appear at the console indicating that the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "match address 101",
"cmd": "match address 101",
"desc": "ACL to the crypto map"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VPN",
"title": "set transformset GRE-SEC",
"cmd": "set transformset GRE-SEC",
"desc": "Applies the previously configured"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "set peer 198.51.100.1",
"cmd": "set peer 198.51.100.1",
"desc": "Step 4: Create an IPsec Profile (repeat on CE2)"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "set peer 209.165.201.1",
"cmd": "set peer 209.165.201.1",
"desc": "Step 4: Create an IPsec Profile (repeat on CE2)"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto ipsec profile GRE-PROFILE",
"cmd": "crypto ipsec profile GRE-PROFILE",
"desc": "Creates an IPsec profile named GREPROFILE"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VPN",
"title": "set transform-set GRE-SEC",
"cmd": "set transform-set GRE-SEC",
"desc": "Verifying GRE/IPsec"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "show crypto isakmp sa",
"cmd": "show crypto isakmp sa",
"desc": "Displays current Internet Key Exchange (IKE)"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "show crypto ipsec sa",
"cmd": "show crypto ipsec sa",
"desc": "DMVPN Phase 1: Hub Router"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto isakmp policy 10",
"cmd": "crypto isakmp policy 10",
"desc": "Enables SHA-256 hashing"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "authentication pre-share",
"cmd": "authentication pre-share",
"desc": "Exits the ISAKMP policy"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto isakmp",
"cmd": "crypto isakmp",
"desc": "Defines a PSK to be used for any ISAKMP neighbor"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto isakmp key CiscoDMVPNKey address 0.0.0.0",
"cmd": "crypto isakmp key CiscoDMVPNKey address 0.0.0.0",
"desc": "Defines a PSK to be used for any ISAKMP neighbor"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto ipsec transform-set DMVPNset espaes 256 espsha256-hmac",
"cmd": "crypto ipsec transform-set DMVPNset espaes 256 espsha256-hmac",
"desc": "Exits the transform set"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto ipsec profile DMVPNprofile",
"cmd": "crypto ipsec profile DMVPNprofile",
"desc": "Creates an IPsec profile called DMVPNprofile"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "set transform-set DMVPNset",
"cmd": "set transform-set DMVPNset",
"desc": "Applies an IP address to the tunnel interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip tcp adjust-mss 1360",
"cmd": "ip tcp adjust-mss 1360",
"desc": "Reduces the TCP maximum segment size to 1360"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp authentication cisco",
"cmd": "ip nhrp authentication cisco",
"desc": "Configures a password of cisco for NHRP"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp map multicast",
"cmd": "ip nhrp map multicast",
"desc": "Allows NHRP to automatically add spoke routers to"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp map 10.99.1.1 10.99.0.1",
"cmd": "ip nhrp map 10.99.1.1 10.99.0.1",
"desc": "Allows NHRP to automatically add spoke routers to"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp network-id 123",
"cmd": "ip nhrp network-id 123",
"desc": "Specifies a tunnel source"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VPN",
"title": "tunnel mode gre multipoint",
"cmd": "tunnel mode gre multipoint",
"desc": "Enables mGRE on the Hub router0"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "tunnel destination 10.99.0.1",
"cmd": "tunnel destination 10.99.0.1",
"desc": "Enables mGRE on the Hub router0"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "tunnel key 12345",
"cmd": "tunnel key 12345",
"desc": "Uniquely identifies the tunnel within the router"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "tunnel protection ipsec profile DMVPNprofile",
"cmd": "tunnel protection ipsec profile DMVPNprofile",
"desc": "Enables EIGRP using named mode configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "address-family ipv4 unicast autonomoussystem 10",
"cmd": "address-family ipv4 unicast autonomoussystem 10",
"desc": "Creates an IPv4 address family for AS 10"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "network 172.16.1.1 0.0.0.0",
"cmd": "network 172.16.1.1 0.0.0.0",
"desc": "Advertises network 172.16.1.1/32"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "network 172.16.101.1 0.0.0.0",
"cmd": "network 172.16.101.1 0.0.0.0",
"desc": "Advertises network 172.16.1.1/32"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "network 10.99.1.0 0.0.0.255",
"cmd": "network 10.99.1.0 0.0.0.255",
"desc": "Advertises network 10.99.1.0/24 (the tunnel"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "af-interface tunnel 0",
"cmd": "af-interface tunnel 0",
"desc": "Enters address-family interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "no split-horizon",
"cmd": "no split-horizon",
"desc": "Defines a PSK to be used for any ISAKMP"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "crypto ipsec transform-set DMVPNset esp-aes 256 esp-sha256-hmac",
"cmd": "crypto ipsec transform-set DMVPNset esp-aes 256 esp-sha256-hmac",
"desc": "Maps the hub tunnel interface and physical"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp map multicast 10.99.0.1",
"cmd": "ip nhrp map multicast 10.99.0.1",
"desc": "Defines an NHRP network ID"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip nhrp nhs",
"cmd": "ip nhrp nhs",
"desc": "Exits interface configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "no next-hopself",
"cmd": "no next-hopself",
"desc": "Enters interface"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "NAT",
"title": "no tunnel destination 10.99.0.1",
"cmd": "no tunnel destination 10.99.0.1",
"desc": "Phase 3 DMVPN is designed for the hub to only advertise a"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "VPN",
"title": "show dmvpn",
"cmd": "show dmvpn",
"desc": "Displays DMVPN-specific session"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "show ip nhrp",
"cmd": "show ip nhrp",
"desc": "Displays NHRP mapping information"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "MPLS",
"title": "show ip nhrp nhs detail",
"cmd": "show ip nhrp nhs detail",
"desc": "Displays NHRP NHS information"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug dmvpn",
"cmd": "debug dmvpn",
"desc": "DMVPN sessions"
},
{
"os": "ios",
"role": "firewall",
"vendor": "Cisco",
"cat": "Troubleshooting",
"title": "debug nhrp",
"cmd": "debug nhrp",
"desc": "Follow these steps when configuring a Cisco router for VRF-Lite"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip vrf GUEST",
"cmd": "ip vrf GUEST",
"desc": "Exits VRF configuration mode"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "vrf definition STAFF",
"cmd": "vrf definition STAFF",
"desc": "Overlay Tunnels and VRF"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "ip route vrf GUEST 0.0.0.0 0.0.0.0 172.16.16.2",
"cmd": "ip route vrf GUEST 0.0.0.0 0.0.0.0 172.16.16.2",
"desc": "Defines a default route for"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "OSPF",
"title": "router ospf 1 vrf STAFF",
"cmd": "router ospf 1 vrf STAFF",
"desc": "Assigns the GUEST VRF to"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "MPLS",
"title": "show vrf",
"cmd": "show vrf",
"desc": "VRF CLI format"
}
]
[
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "vlan 3",
"cmd": "vlan 3",
"desc": "Creates VLAN 3 and enters VLAN configuration"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "name Engineering",
"cmd": "name Engineering",
"desc": "Assigns a name to the VLAN. The length of the"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "VLAN",
"title": "exit",
"cmd": "exit",
"desc": "Assigning Ports to Data and Voice VLANs"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface fastethernet 0/1",
"cmd": "interface fastethernet 0/1",
"desc": "Moves to interface configuration"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport mode access",
"cmd": "switchport mode access",
"desc": "Sets the port to access mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport access vlan 10",
"cmd": "switchport access vlan 10",
"desc": "Assigns this port to data VLAN 10"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport voice vlan 11",
"cmd": "switchport voice vlan 11",
"desc": "Using the range Command"
},
{
"os": "ios",
"role": "router",
"vendor": "Cisco",
"cat": "Interfaces",
"title": "interface range fastethernet 0/1 – 9",
"cmd": "interface range fastethernet 0/1 – 9",
"desc": "Moves to interface configuration mode"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport mode",
"cmd": "switchport mode",
"desc": "VIRTUAL LANS"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport nonegotiate",
"cmd": "switchport nonegotiate",
"desc": "Use the switchport mode nonegotiate command only when"
},
{
"os": "ios",
"role": "switch",
"vendor": "Cisco",
"cat": "VLAN",
"title": "switchport trunk pruning vlan except 40-50",
"cmd": "switchport trunk pruning vlan except 40-50",
"desc": "Use the switchport mode nonegotiate command only when"
},