Prompts stringlengths 104 946 | Result stringlengths 3.77k 10.4k | Text stringlengths 3.95k 10.7k ⌀ | Text_Len int64 987 2.8k ⌀ |
|---|---|---|---|
create an ADC module with ADC channel1 and channel 2. Create two groups for this module. Group 1 should have a one-shot conversion mode and reference both channel 1 and channel 2. Group 2 should use continuous conversion mode and only reference channel 3. Enable hardware trigger api and set the maximum resolution to 10... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an ADC module with ADC channel1 and channel 2. Create two groups for this module. Group 1 should have a one-shot conversion mode and reference both channel 1 and channel 2. Group 2 should use continuous conversion mode and only reference channel 3. Enable hardware trigger api and set the maximum res... | 1,543 |
create an adc module with adc deninit enabled , dev error detect enabled ,start stop group api enabled, read group api enabled and result alignment set to right, with hwunit with prescale set to 64, conv time set to
1, enabled limit check, channel high limit set to 2, channel low limit set to 1, channel resolution set... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with adc deninit enabled , dev error detect enabled ,start stop group api enabled, read group api enabled and result alignment set to right, with hwunit with prescale set to 64, conv time set to
1, enabled limit check, channel high limit set to 2, channel low limit set to 1, channel r... | 1,558 |
create an adc module with read group api,version info , hwunit 1 with channel conversion time set to 1
with 3 adc channels and adc group 1 with streaming number of samples set to 3 ,linear stream buffer, stream access mode and one shot conversion mode, hw trigger signal set to rising edge,
the group has referance to th... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with read group api,version info , hwunit 1 with channel conversion time set to 1
with 3 adc channels and adc group 1 with streaming number of samples set to 3 ,linear stream buffer, stream access mode and one shot conversion mode, hw trigger signal set to rising edge,
the group has re... | 1,814 |
Create adc module,hw trigger api ,enable queuing,dev error detect enabled ,grp notify capability,version info api enabled,det init api enabled ,priority implemntation is none , one hardware unit contains two channels an every channel resolution is 4 and conversion time is 16 ,max channel resolution is 16 , channel valu... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>Create adc module,hw trigger api ,enable queuing,dev error detect enabled ,grp notify capability,version info api enabled,det init api enabled ,priority implemntation is none , one hardware unit contains two channels an every channel resolution is 4 and conversion time is 16 ,max channel resolution is 16 ,... | 1,259 |
create an adc module with read group api,version info ,deninit api, dev error detect, enable limit check, adc low power state support, power state asynch transition mode,result alignement set to right, with one channel and
with enabled channel limit check,channel conversion time set to 1, channel sample time set to 1... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with read group api,version info ,deninit api, dev error detect, enable limit check, adc low power state support, power state asynch transition mode,result alignement set to right, with one channel and
with enabled channel limit check,channel conversion time set to 1, channel sample ... | 1,200 |
Create adc module,hw trigger api,dev error detect,enable limit check ,enable queuing,grp notify capability,version info api enabled,priority implemntation is none,result alignment is right ,one hardware uint id is 0 contains one channel and one group conversion time of hardware unit is 128 , max channel resolution is 8... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>Create adc module,hw trigger api,dev error detect,enable limit check ,enable queuing,grp notify capability,version info api enabled,priority implemntation is none,result alignment is right ,one hardware uint id is 0 contains one channel and one group conversion time of hardware unit is 128 , max channel re... | 1,075 |
create an adc module with read group api,version info , hwunit 1 with channel conversion time set to 1, sample time set to 1, channel resulotion set to 1, prescaler set to 64
with 2 adc channels and adc group 1 with linear stream buffer, stream access mode and one shot conversion mode,
adc group 2 with group trigger s... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with read group api,version info , hwunit 1 with channel conversion time set to 1, sample time set to 1, channel resulotion set to 1, prescaler set to 64
with 2 adc channels and adc group 1 with linear stream buffer, stream access mode and one shot conversion mode,
adc group 2 with gr... | 1,608 |
create adc module,hw unit 1 with id 0 contains one group and one channel,hw unit 2 id 1 contains one group and one channel ,hw unit 2 wiht id 2 contains one group and one channel
| {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create adc module,hw unit 1 with id 0 contains one group and one channel,hw unit 2 id 1 contains one group and one channel ,hw unit 2 wiht id 2 contains one group and one channel
space {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DE... | 1,845 |
create an ADC module. Configure two hardware units, where hardware unit 1 it's id 0 has one group and one channel, and hardware unit 2 its id 1 has one group and one channel. Set the both group conversion mode to one shot and enable hardware triggering api . Additionally, set the result alignment to right.
| {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an ADC module. Configure two hardware units, where hardware unit 1 it's id 0 has one group and one channel, and hardware unit 2 its id 1 has one group and one channel. Set the both group conversion mode to one shot and enable hardware triggering api . Additionally, set the result alignment to righ... | 1,474 |
Create adc module,hw trigger api is enabled ,dev errorr detect,power state asynch transiltion mode ,read group api,enable queuing ,priority implemntation is software and result alignment is right one hardware unit ,one group and one channel
| {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>Create adc module,hw trigger api is enabled ,dev errorr detect,power state asynch transiltion mode ,read group api,enable queuing ,priority implemntation is software and result alignment is right one hardware unit ,one group and one channel
space {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODUL... | 1,017 |
create adc module, result alignment is right, enable queuing, hw trigger, low power state support is enable, hardware unit one id oo, prescaler It's 64, ons adc grup is o trigger signal both edges, one chanal id 0, chanal resolution [[ist $16, sample time 4 | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | null | null |
create adc module, enable queuning, enable limit check, gruop notify capability, hw trigger api, priority implementation is none, read group api is enabled, version info api is enabled, we need two hardware units in config set, hardware unit 1 id 0, presclaer is 32, conv time is 6, chanal resolution is 8, sample thime ... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | null | null |
create an adc module with adc enabled limit check , enabled dev error detect, enabled queuing ,result alignmemt set to right ,
hwunit 1 with channel conversion time set to 1, sample time set to 1, channel resulotion set to 1, channel limit check enbaled ,prescaler set to 128
with 2 adc channels and adc group 1 with l... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with adc enabled limit check , enabled dev error detect, enabled queuing ,result alignmemt set to right ,
hwunit 1 with channel conversion time set to 1, sample time set to 1, channel resulotion set to 1, channel limit check enbaled ,prescaler set to 128
with 2 adc channels and adc g... | 1,693 |
create an adc module with read group api,version info ,adc priority set to hw -sw, dev error detect, enable limit check,result alignement set to right,
with adc channel 1 with enabled channel limit check,channel conversion time set to 1,range select set to over high, channel sample time set to 1,and adc channel 2 with... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with read group api,version info ,adc priority set to hw -sw, dev error detect, enable limit check,result alignement set to right,
with adc channel 1 with enabled channel limit check,channel conversion time set to 1,range select set to over high, channel sample time set to 1,and adc c... | 1,513 |
create an adc module with adc deninit enabled, queuing enabled, version infos enabled, dev error detect enabled, start stops group api enabled, read group api enabled, wtihe hwunit with prescale set to 128, conv time set to 1, channel range select set to over high, enabled limit check, channel high limit set to 2, chan... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | null | null |
create an adc module with read group api,version info ,adc priority set to hw ,
with 3 adc channels and adc group 1 with linear stream buffer, stream access mode and one shot conversion mode, hw trigger signal set to rising edge,
the group has referance to the 3 channels,adc group 2 with sw trigger source ,and the gr... | {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>create an adc module with read group api,version info ,adc priority set to hw ,
with 3 adc channels and adc group 1 with linear stream buffer, stream access mode and one shot conversion mode, hw trigger signal set to rising edge,
the group has referance to the 3 channels,adc group 2 with sw trigger sourc... | 1,641 |
Create adc module,hw trigger api ,dev error detect enabled ,grp notify capability,version info api enabled,det init api enabled ,priority implemntation is hardware , one hardware unit contains two channels an every channel resolution is 4 and conversion time is 8
| {"ECUC-MODULE-CONFIGURATION-VALUES": {"@Dest": "ECUC-MODULE-DEF", "@DEST": "BSW-IMPLEMENTATION", "SHORT-NAME": "Adc", "DEFINITION-REF": "AUTOSAR/EcucDefs/Adc", "IMPLEMENTATION-CONFIG-VARIANT": "VARIANT-POST-BUILD", "MODULE-DESCRIPTION-REF": "AUTOSAR/EcucDefs/Adc", "CONTAINERS": {"ECUC-CONTAINER-VALUE": [{"SHORT-NAME": ... | <|endoftext|>Create adc module,hw trigger api ,dev error detect enabled ,grp notify capability,version info api enabled,det init api enabled ,priority implemntation is hardware , one hardware unit contains two channels an every channel resolution is 4 and conversion time is 8
space {"ECUC-MODULE-CONFIGURATION-VALUES":... | 1,237 |
End of preview. Expand in Data Studio
README.md exists but content is empty.
- Downloads last month
- 20