Dataset Viewer

Split (1)

train

The dataset viewer is not available for this split.

Cannot load the dataset split (in streaming mode) to extract the first rows.

Error code:   StreamingRowsError
Exception:    CastError
Message:      Couldn't cast
digest: string
kind: string
path: string
payload_sha3: string
prev: string
seq: int64
ts: timestamp[s]
benchmarks: list<item: struct<evidence: struct<ceilings: struct<max_files: int64, max_lines: int64, min_lines: i (... 3044 chars omitted)
  child 0, item: struct<evidence: struct<ceilings: struct<max_files: int64, max_lines: int64, min_lines: int64>, code (... 3032 chars omitted)
      child 0, evidence: struct<ceilings: struct<max_files: int64, max_lines: int64, min_lines: int64>, code_lines: int64, co (... 2961 chars omitted)
          child 0, ceilings: struct<max_files: int64, max_lines: int64, min_lines: int64>
              child 0, max_files: int64
              child 1, max_lines: int64
              child 2, min_lines: int64
          child 1, code_lines: int64
          child 2, command: string
          child 3, counts_command: string
          child 4, files_source: int64
          child 5, files_tests: int64
          child 6, files_total: int64
          child 7, method: string
          child 8, test_to_source_line_ratio: double
          child 9, total_lines: int64
          child 10, a_licences: list<item: string>
              child 0, item: string
          child 11, b_licences: list<item: string>
              child 0, item: string
          child 12, default_for_unknown_is_C: bool
          child 13, mismatches: struct<>
          child 14, observed: struct<agpl3: string, apache2: string, bsd3: string, commons_clause: string, garbage: string, gpl3:  (...
...
_path: string
                  child 2, present: bool
              child 7, versioning: struct<detail: string, evidence_path: string, present: bool>
                  child 0, detail: string
                  child 1, evidence_path: string
                  child 2, present: bool
          child 62, criteria_missing: list<item: null>
              child 0, item: null
          child 63, criteria_satisfied: int64
          child 64, criteria_total: int64
          child 65, framework_controls_verified: int64
          child 66, ladder: string
          child 67, observed_level: int64
          child 68, source: string
          child 69, trL9_claimed: bool
          child 70, trL9_reason: string
      child 1, id: string
      child 2, ok: bool
      child 3, status: string
      child 4, title: string
total: int64
method: struct<aggregate_rule: string, excluded: string, reproduce: string, thresholds_note: string>
  child 0, aggregate_rule: string
  child 1, excluded: string
  child 2, reproduce: string
  child 3, thresholds_note: string
python: string
sbom_written: bool
version: string
passed: int64
schema: string
failed: int64
failed_ids: list<item: null>
  child 0, item: null
all_passed: bool
platform: string
root: string
source: struct<git: struct<head: string, url: string, sha_verified_from: string>>
  child 0, git: struct<head: string, url: string, sha_verified_from: string>
      child 0, head: string
      child 1, url: string
      child 2, sha_verified_from: string
to
{'all_passed': Value('bool'), 'benchmarks': List({'evidence': {'ceilings': {'max_files': Value('int64'), 'max_lines': Value('int64'), 'min_lines': Value('int64')}, 'code_lines': Value('int64'), 'command': Value('string'), 'counts_command': Value('string'), 'files_source': Value('int64'), 'files_tests': Value('int64'), 'files_total': Value('int64'), 'method': Value('string'), 'test_to_source_line_ratio': Value('float64'), 'total_lines': Value('int64'), 'a_licences': List(Value('string')), 'b_licences': List(Value('string')), 'default_for_unknown_is_C': Value('bool'), 'mismatches': {}, 'observed': {'agpl3': Value('string'), 'apache2': Value('string'), 'bsd3': Value('string'), 'commons_clause': Value('string'), 'garbage': Value('string'), 'gpl3': Value('string'), 'isc': Value('string'), 'lgpl': Value('string'), 'mit': Value('string'), 'mpl2': Value('string'), 'noncommercial': Value('string'), 'proprietary': Value('string'), 'sspl': Value('string'), 'unknown_absent': Value('string')}, 'only_class_A_may_relicense': Value('bool'), 'policy_probes': {'agpl3': Value('string'), 'apache2': Value('string'), 'bsd3': Value('string'), 'commons_clause': Value('string'), 'garbage': Value('string'), 'gpl3': Value('string'), 'isc': Value('string'), 'lgpl': Value('string'), 'mit': Value('string'), 'mpl2': Value('string'), 'noncommercial': Value('string'), 'proprietary': Value('string'), 'sspl': Value('string'), 'unknown_absent': Value('string')}, 'project_licence': {'LICENSE': Value('string'), '
...
}, 'packaging': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'qualification_environment_pinned': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'reproducible_tests': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'rerunnable_verification': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'versioning': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}}, 'criteria_missing': List(Value('null')), 'criteria_satisfied': Value('int64'), 'criteria_total': Value('int64'), 'framework_controls_verified': Value('int64'), 'ladder': Value('string'), 'observed_level': Value('int64'), 'source': Value('string'), 'trL9_claimed': Value('bool'), 'trL9_reason': Value('string')}, 'id': Value('string'), 'ok': Value('bool'), 'status': Value('string'), 'title': Value('string')}), 'failed': Value('int64'), 'failed_ids': List(Value('null')), 'method': {'aggregate_rule': Value('string'), 'excluded': Value('string'), 'reproduce': Value('string'), 'thresholds_note': Value('string')}, 'passed': Value('int64'), 'platform': Value('string'), 'python': Value('string'), 'root': Value('string'), 'sbom_written': Value('bool'), 'schema': Value('string'), 'total': Value('int64'), 'version': Value('string'), 'source': {'git': {'head': Value('string'), 'url': Value('string'), 'sha_verified_from': Value('string')}}}
because column names don't match
Traceback:    Traceback (most recent call last):
                File "/src/services/worker/src/worker/utils.py", line 147, in get_rows_or_raise
                  return get_rows(
                      dataset=dataset,
                  ...<4 lines>...
                      column_names=column_names,
                  )
                File "/src/libs/libcommon/src/libcommon/utils.py", line 272, in decorator
                  return func(*args, **kwargs)
                File "/src/services/worker/src/worker/utils.py", line 127, in get_rows
                  rows_plus_one = list(itertools.islice(safe_iter(ds, dataset=dataset), rows_max_number + 1))
                File "/src/services/worker/src/worker/utils.py", line 483, in safe_iter
                  yield from ds.decode(False) if ds.features else ds
                File "/usr/local/lib/python3.14/site-packages/datasets/iterable_dataset.py", line 2951, in __iter__
                  for key, example in ex_iterable:
                                      ^^^^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/iterable_dataset.py", line 2461, in __iter__
                  for key, pa_table in self._iter_arrow():
                                       ~~~~~~~~~~~~~~~~^^
                File "/usr/local/lib/python3.14/site-packages/datasets/iterable_dataset.py", line 2486, in _iter_arrow
                  for key, pa_table in self.ex_iterable._iter_arrow():
                                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^
                File "/usr/local/lib/python3.14/site-packages/datasets/iterable_dataset.py", line 547, in _iter_arrow
                  for key, pa_table in iterator:
                                       ^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/iterable_dataset.py", line 430, in _iter_arrow
                  for key, pa_table in self.generate_tables_fn(**gen_kwags):
                                       ~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/packaged_modules/json/json.py", line 343, in _generate_tables
                  self._cast_table(pa_table, json_field_paths=json_field_paths),
                  ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/packaged_modules/json/json.py", line 132, in _cast_table
                  pa_table = table_cast(pa_table, self.info.features.arrow_schema)
                File "/usr/local/lib/python3.14/site-packages/datasets/table.py", line 2378, in table_cast
                  return cast_table_to_schema(table, schema)
                File "/usr/local/lib/python3.14/site-packages/datasets/table.py", line 2306, in cast_table_to_schema
                  raise CastError(
                  ...<3 lines>...
                  )
              datasets.table.CastError: Couldn't cast
              digest: string
              kind: string
              path: string
              payload_sha3: string
              prev: string
              seq: int64
              ts: timestamp[s]
              benchmarks: list<item: struct<evidence: struct<ceilings: struct<max_files: int64, max_lines: int64, min_lines: i (... 3044 chars omitted)
                child 0, item: struct<evidence: struct<ceilings: struct<max_files: int64, max_lines: int64, min_lines: int64>, code (... 3032 chars omitted)
                    child 0, evidence: struct<ceilings: struct<max_files: int64, max_lines: int64, min_lines: int64>, code_lines: int64, co (... 2961 chars omitted)
                        child 0, ceilings: struct<max_files: int64, max_lines: int64, min_lines: int64>
                            child 0, max_files: int64
                            child 1, max_lines: int64
                            child 2, min_lines: int64
                        child 1, code_lines: int64
                        child 2, command: string
                        child 3, counts_command: string
                        child 4, files_source: int64
                        child 5, files_tests: int64
                        child 6, files_total: int64
                        child 7, method: string
                        child 8, test_to_source_line_ratio: double
                        child 9, total_lines: int64
                        child 10, a_licences: list<item: string>
                            child 0, item: string
                        child 11, b_licences: list<item: string>
                            child 0, item: string
                        child 12, default_for_unknown_is_C: bool
                        child 13, mismatches: struct<>
                        child 14, observed: struct<agpl3: string, apache2: string, bsd3: string, commons_clause: string, garbage: string, gpl3:  (...
              ...
              _path: string
                                child 2, present: bool
                            child 7, versioning: struct<detail: string, evidence_path: string, present: bool>
                                child 0, detail: string
                                child 1, evidence_path: string
                                child 2, present: bool
                        child 62, criteria_missing: list<item: null>
                            child 0, item: null
                        child 63, criteria_satisfied: int64
                        child 64, criteria_total: int64
                        child 65, framework_controls_verified: int64
                        child 66, ladder: string
                        child 67, observed_level: int64
                        child 68, source: string
                        child 69, trL9_claimed: bool
                        child 70, trL9_reason: string
                    child 1, id: string
                    child 2, ok: bool
                    child 3, status: string
                    child 4, title: string
              total: int64
              method: struct<aggregate_rule: string, excluded: string, reproduce: string, thresholds_note: string>
                child 0, aggregate_rule: string
                child 1, excluded: string
                child 2, reproduce: string
                child 3, thresholds_note: string
              python: string
              sbom_written: bool
              version: string
              passed: int64
              schema: string
              failed: int64
              failed_ids: list<item: null>
                child 0, item: null
              all_passed: bool
              platform: string
              root: string
              source: struct<git: struct<head: string, url: string, sha_verified_from: string>>
                child 0, git: struct<head: string, url: string, sha_verified_from: string>
                    child 0, head: string
                    child 1, url: string
                    child 2, sha_verified_from: string
              to
              {'all_passed': Value('bool'), 'benchmarks': List({'evidence': {'ceilings': {'max_files': Value('int64'), 'max_lines': Value('int64'), 'min_lines': Value('int64')}, 'code_lines': Value('int64'), 'command': Value('string'), 'counts_command': Value('string'), 'files_source': Value('int64'), 'files_tests': Value('int64'), 'files_total': Value('int64'), 'method': Value('string'), 'test_to_source_line_ratio': Value('float64'), 'total_lines': Value('int64'), 'a_licences': List(Value('string')), 'b_licences': List(Value('string')), 'default_for_unknown_is_C': Value('bool'), 'mismatches': {}, 'observed': {'agpl3': Value('string'), 'apache2': Value('string'), 'bsd3': Value('string'), 'commons_clause': Value('string'), 'garbage': Value('string'), 'gpl3': Value('string'), 'isc': Value('string'), 'lgpl': Value('string'), 'mit': Value('string'), 'mpl2': Value('string'), 'noncommercial': Value('string'), 'proprietary': Value('string'), 'sspl': Value('string'), 'unknown_absent': Value('string')}, 'only_class_A_may_relicense': Value('bool'), 'policy_probes': {'agpl3': Value('string'), 'apache2': Value('string'), 'bsd3': Value('string'), 'commons_clause': Value('string'), 'garbage': Value('string'), 'gpl3': Value('string'), 'isc': Value('string'), 'lgpl': Value('string'), 'mit': Value('string'), 'mpl2': Value('string'), 'noncommercial': Value('string'), 'proprietary': Value('string'), 'sspl': Value('string'), 'unknown_absent': Value('string')}, 'project_licence': {'LICENSE': Value('string'), '
              ...
              }, 'packaging': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'qualification_environment_pinned': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'reproducible_tests': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'rerunnable_verification': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}, 'versioning': {'detail': Value('string'), 'evidence_path': Value('string'), 'present': Value('bool')}}, 'criteria_missing': List(Value('null')), 'criteria_satisfied': Value('int64'), 'criteria_total': Value('int64'), 'framework_controls_verified': Value('int64'), 'ladder': Value('string'), 'observed_level': Value('int64'), 'source': Value('string'), 'trL9_claimed': Value('bool'), 'trL9_reason': Value('string')}, 'id': Value('string'), 'ok': Value('bool'), 'status': Value('string'), 'title': Value('string')}), 'failed': Value('int64'), 'failed_ids': List(Value('null')), 'method': {'aggregate_rule': Value('string'), 'excluded': Value('string'), 'reproduce': Value('string'), 'thresholds_note': Value('string')}, 'passed': Value('int64'), 'platform': Value('string'), 'python': Value('string'), 'root': Value('string'), 'sbom_written': Value('bool'), 'schema': Value('string'), 'total': Value('int64'), 'version': Value('string'), 'source': {'git': {'head': Value('string'), 'url': Value('string'), 'sha_verified_from': Value('string')}}}
              because column names don't match

Need help to make the dataset viewer work? Make sure to review how to configure the dataset viewer, and open a discussion for direct support.

YAML Metadata Warning:empty or missing yaml metadata in repo card

Check out the documentation for more information.

ZIGBEE2MQTT

Anticloud-hardened packaging of the upstream project ZIGBEE2MQTT in category CONSUMER APPLIANCES. Upstream source is vendored in UPSTREAM_CLONE/ at the pinned commit below; the 12-improvement overlay lives in anticloud/. Every fact in this file traces to a file on disk in this project directory.

Category: CONSUMER APPLIANCES · Upstream: https://github.com/Koenkk/zigbee2mqtt · Upstream pin: 25d64848d24734cafb178b96a699e35e3bbe51a8 · Vendor: Anticloud FZ LLE

What This Project Does

Official Zigbee2MQTT Home Assistant app

If you're using a Raspberry Pi, ensure you have at least a Raspberry Pi 4, as running it on a Raspberry Pi 3 may cause instability due to its limited resources.

Installation

If you don't have an MQTT broker yet; in Home Assistant go to Settings → Apps → App store and install the Mosquitto broker app, then start it.
Go back to the App store, click ⋮ → projects, fill in
https://github.com/zigbee2mqtt/hassio-zigbee2mqtt and click Add → Close or click the Add project button below, click Add → Close (You might need to enter the internal IP address of your Home Assistant instance first).
The project includes two apps:
- Zigbee2MQTT is the stable release that tracks the released versions of Zigbee2MQTT. (recommended for most users)
- Zigbee2MQTT Edge tracks the dev branch of Zigbee2MQTT such that you can install the edge version if there are features or fixes in the Zigbee2MQTT dev branch that are not yet released.
Click on the app and press Install and wait till the app is installed.
Start the app by going to Info and click Start
Wait a few seconds and press OPEN WEB UI, you will now see the onboarding page. More information about the onboarding can be found here.
Fill in the desired settings, for most setups changing the following is enough:
- Select your adapter under Found Devices, this will configure the Coordinator/Adapter Port/Path and Coordinator/Adapter Type/Stack/Driver.
- Fill in the Closests WiFi Channel to select the most optimal Zigbee channel.
Press Submit, Zigbee2MQTT will now start, wait a few seconds and refresh the page. You should now see the Zigbee2MQTT frontend.
- If it shows 502: Bad Gateway wait a bit more and refresh the page.
- If this takes too long (e.g. 2 minutes +) check the Log tab to see what went wrong.
- In case the app fails to start with the following error: USB adapter discovery error (No valid USB adapter found). Specify valid 'adapter' and 'port' in your configuration., we need to fill in the serial section. Format can be found here, but skip the initial serial: indent. e.g.:
```
adapter: zstack
port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018ED3DDF-if00
```
  If you don't know the port and you have just one USB device connected to your machine try /dev/ttyACM0 or /dev/ttyUSB0 or /dev/ttyAMA0. Else use the Home Assistant CLI and execute ha hardware info to find out.

For more information see the documentation.

Restoring data from a standalone installation

Ensure that both environments are running the same version
Ensure you can SSH to your Home Assistant OS (NOT to the SSH App)
Backup your standalone environment data folder (possibly leaving out the logs/ folder)
Start the Zigbee2MQTT HA app with a non-existing tty device, to create the data folder
Restore your data folder contents into /mnt/data/supervisor/homeassistant/zigbee2mqtt, e.g. via scp -O -P 22222 -i PATHTOUSEDSSHKEY ./data/* root@hass:/mnt/data/supervisor/homeassistant/zigbee2mqtt/
Configure your serial port and MQTT settings using the HA app configuration UI
Edit the /usr/share/hassio/homeassistant/zigbee2mqtt/configuration.yaml file:
- Ensure that the serial port section matches the one configured with the UI
- Remove any irrelevant sections from the config (e.g. mqtt (if not needed), advanced/log_syslog, frontend)
Start the app

Changelog

The format is based on Keep a Changelog.

All notable changes to this project will be documented in the CHANGELOG.md file.

Version for releases is based on Zigbee2MQTT format: X.Y.Z.

Any changes on the app that do not require a new version of Zigbee2MQTT will use the format: X.Y.Z-A where X.Y.Z is fixed on the Zigbee2MQTT release version and A is related to the ap

(excerpt; full text in UPSTREAM_CLONE/)

Quoted from the upstream README.md file in UPSTREAM_CLONE/. Project-specific facts detected in this directory:

Ecosystem: Node.js / npm (manifests: package.json, pnpm-lock.yaml; scanned in UPSTREAM_CLONE)
Top-level source layout: common/, data/, docker/, images/, lib/, scripts/, test/, zigbee2mqtt/, zigbee2mqtt-edge/, zigbee2mqtt-proxy/
Snapshot size: 149 files, 40725 lines of code (measured; see Benchmarks)
Primary languages: .ts (76), .json (12), .md (11), .png (11), (none) (8), .js (8)
Upstream commit pinned for this packaging: 25d64848d24734cafb178b96a699e35e3bbe51a8

Installation

If you don't have an MQTT broker yet; in Home Assistant go to Settings → Apps → App store and install the Mosquitto broker app, then start it.
Go back to the App store, click ⋮ → projects, fill in
https://github.com/zigbee2mqtt/hassio-zigbee2mqtt and click Add → Close or click the Add project button below, click Add → Close (You might need to enter the internal IP address of your Home Assistant instance first).
The project includes two apps:
- Zigbee2MQTT is the stable release that tracks the released versions of Zigbee2MQTT. (recommended for most users)
- Zigbee2MQTT Edge tracks the dev branch of Zigbee2MQTT such that you can install the edge version if there are features or fixes in the Zigbee2MQTT dev branch that are not yet released.
Click on the app and press Install and wait till the app is installed.
Start the app by going to Info and click Start
Wait a few seconds and press OPEN WEB UI, you will now see the onboarding page. More information about the onboarding can be found here.
Fill in the desired settings, for most setups changing the following is enough:
- Select your adapter under Found Devices, this will configure the Coordinator/Adapter Port/Path and Coordinator/Adapter Type/Stack/Driver.
- Fill in the Closests WiFi Channel to select the most optimal Zigbee channel.
Press Submit, Zigbee2MQTT will now start, wait a few seconds and refresh the page. You should now see the Zigbee2MQTT frontend.
- If it shows 502: Bad Gateway wait a bit more and refresh the page.
- If this takes too long (e.g. 2 minutes +) check the Log tab to see what went wrong.
- In case the app fails to start with the following error: USB adapter discovery error (No valid USB adapter found). Specify valid 'adapter' and 'port' in your configuration., we need to fill in the serial section. Format can be found here, but skip the initial serial: indent. e.g.:
```
adapter: zstack
port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018ED3DDF-if00
```
  If you don't know the port and you have just one USB device connected to your machine try /dev/ttyACM0 or /dev/ttyUSB0 or /dev/ttyAMA0. Else use the Home Assistant CLI and execute ha hardware info to find out.

For more information see the documentation.

Section quoted from the upstream readme. Overlay install (this project):

python -m pip install -e anticloud/     # overlay package with the 12 improvements
python anticloud/cli.py --help          # 13 subcommands, JSON stdout

Usage

No usage section was found in the upstream readme. Entry points detected in this project directory:

npm start          # declared start script, when present
npm run dev        # declared dev script, when present

Anticloud overlay CLI (available in every project):

python anticloud/cli.py --help     # 13 subcommands, JSON stdout
python anticloud/cli.py checks     # run the 16-check suite

API

The project includes two apps:
- Zigbee2MQTT is the stable release that tracks the released versions of Zigbee2MQTT. (recommended for most users)
- Zigbee2MQTT Edge tracks the dev branch of Zigbee2MQTT such that you can install the edge version if there are features or fixes in the Zigbee2MQTT dev branch that are not yet released.
Click on the app and press Install and wait till the app is installed.
Start the app by going to Info and click Start
Wait a few seconds and press OPEN WEB UI, you will now see the onboarding page. More information about the onboarding can be found here.
Fill in the desired settings, for most setups changing the following is enough:
- Select your adapter under Found Devices, this will configure the Coordinator/Adapter Port/Path and Coordinator/Adapter Type/Stack/Driver.
- Fill in the Closests WiFi Channel to select the most optimal Zigbee channel.
Press Submit, Zigbee2MQTT will now start, wait a few seconds and refresh the page. You should now see the Zigbee2MQTT frontend.
- If it shows 502: Bad Gateway wait a bit more and refresh the page.
- If this takes too long (e.g. 2 minutes +) check the Log tab to see what went wrong.
- In case the app fails to start with the following error: USB adapter discovery error (No valid USB adapter found). Specify valid 'adapter' and 'port' in your configuration., we need to fill in the serial section. Format can be found here, but skip the initial serial: indent. e.g.:
```
adapter: zstack
port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018ED3DDF-if00
```
  If you don't know the port and you have just one USB device connected to your machine try /dev/ttyACM0 or /dev/ttyUSB0 or /dev/ttyAMA0. Else use the Home Assistant CLI and execute ha hardware info to find out.

For more information see the documentation.

Section quoted from the upstream readme.

Dependencies

Metric	Value
Ecosystem	Node.js / npm
Manifests detected	package.json, pnpm-lock.yaml
Files in snapshot	149
Lines of code	40725
Dependency references	29
Dependencies by ecosystem	npm: 29
Upstream license	Apache-2.0
Overlay license	Anticommons 0.1.0

Top dependency references recorded in the benchmark snapshot:

Ecosystem	Name	Version	Source file
npm	ajv	^8.20.0	package.json
npm	bind-decorator	^1.0.11	package.json
npm	debounce	^3.0.0	package.json
npm	fast-deep-equal	^3.1.3	package.json
npm	fflate	^0.8.3	package.json
npm	humanize-duration	^3.35.0	package.json
npm	js-yaml	^5.4.2	package.json
npm	mqtt	^5.16.0	package.json
npm	semver	^7.8.5	package.json
npm	srvx	^1.0.5	package.json
npm	throttleit	^3.0.0	package.json
npm	winston	^3.19.0	package.json
npm	winston-syslog	^2.7.1	package.json
npm	winston-transport	^4.9.0	package.json
npm	ws	^8.22.0	package.json
...	(14 more)

Pinned lockfile: anticloud/requirements.lock (hash-pinned, PEP 508). SBOM: sbom.cdx.json (CycloneDX 1.5, pinned to the upstream SHA).

Configuration

Go back to the App store, click ⋮ → projects, fill in
https://github.com/zigbee2mqtt/hassio-zigbee2mqtt and click Add → Close or click the Add project button below, click Add → Close (You might need to enter the internal IP address of your Home Assistant instance first).
The project includes two apps:
- Zigbee2MQTT is the stable release that tracks the released versions of Zigbee2MQTT. (recommended for most users)
- Zigbee2MQTT Edge tracks the dev branch of Zigbee2MQTT such that you can install the edge version if there are features or fixes in the Zigbee2MQTT dev branch that are not yet released.
Click on the app and press Install and wait till the app is installed.
Start the app by going to Info and click Start
Wait a few seconds and press OPEN WEB UI, you will now see the onboarding page. More information about the onboarding can be found here.
Fill in the desired settings, for most setups changing the following is enough:
- Select your adapter under Found Devices, this will configure the Coordinator/Adapter Port/Path and Coordinator/Adapter Type/Stack/Driver.
- Fill in the Closests WiFi Channel to select the most optimal Zigbee channel.
Press Submit, Zigbee2MQTT will now start, wait a few seconds and refresh the page. You should now see the Zigbee2MQTT frontend.
- If it shows 502: Bad Gateway wait a bit more and refresh the page.
- If this takes too long (e.g. 2 minutes +) check the Log tab to see what went wrong.
- In case the app fails to start with the following error: USB adapter discovery error (No valid USB adapter found). Specify valid 'adapter' and 'port' in your configuration., we need to fill in the serial section. Format can be found here, but skip the initial serial: indent. e.g.:
```
adapter: zstack
port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018ED3DDF-if00
```
  If you don't know the port and you have just one USB device connected to your machine try /dev/ttyACM0 or /dev/ttyUSB0 or /dev/ttyAMA0. Else use the Home Assistant CLI and execute ha hardware info to find out.

For more information see the documentation.

Section quoted from the upstream readme. Overlay configuration (Anticloud):

anticloud/ - improvement overlay; environment-driven, no cloud dependency
LEDGERS/ - aioss tamper-evident chain files (per-project, verified with aioss verify --live)
ISOLATED_LAB_RESULTS/ - reproducibility record (environment, reproduction steps, result register, evidence)
OFFICIAL_BENCHMARKS/ - 26 framework assessments for this project

Contributing

Excerpt from upstream CONTRIBUTING.md:

Setting up

Git source this project into your apps folder
Remove the image key from zigbee2mqtt-edge/config.json to enable local builds.
Add back "image": "zigbee2mqtt/zigbee2mqtt-edge-{arch}" to zigbee2mqtt-edge/config.json after you're done.

Upgrading the Zigbee2MQTT version

Change the version number in zigbee2mqtt/config.json: "version": "$NEW_VERSION"
Update zigbee2mqtt/CHANGELOG.md
Commit the changes to master branch
Wait till ci finishes
Publish a new "Release". Very important you specify Target: master. Example

Tag version: v1.25.2-1  @ Target: master
Release title: v1.25.2-1

Developing against the Home Assistant container

When you want to check the impact of developing work, e.g. adjusting devices in zigbee-herdsman-converters, you need access to the app container in Home Assistant. Here's how:

🚨 Following these directions will make your Home Assistant system more prone to misconfiguration (by yourself) to the extent of rendering it completely useless, so only touch what you're confident to and "know what you do".

install the Portainer app from the App store
Make sure to disable its Protection mode:
Start Portainer and Open Web UI
in the left menu,
1. head to Settings > section Hidden Containers and remove io.hass.type: addon
2. go to Containers, addon_[…]_zigbee2mqtt, Console, Connect
ℹ️ the location of zigbee-herdsman-converters for example is /app/node_modules/zigbee-herdsman-converters
make your adjustments by copying or vi'ing
Still in portainer, go back to the app's container and Restart

Alternative (without portainer)

Install and setup Advanced SSH & Web Terminal with disabled safe mode
run docker ps and see which container name is the zigbee2mqtt one. (eg. addon_45df7312_zigbee2mqtt)
build your whole application with npm run build
upload the resulting build to your HA instance (eg. vscode server via drag n drop)
execute docker cp (eg. docker cp <the location of your build>/. <container_name>:/app/node_modules/zigbee-herdsman-converters)
execute docker restart <container name>

⚠️ Note that restarting the app via Supervisor or further down the stack will revert the file changes.

Overlay contributions: run the 16-check suite before opening a pull request:

python anticloud/bench/runner.py --cwd anticloud

License

Upstream license: Apache-2.0 (evidence: LICENSE in the upstream snapshot).

License file excerpt:


                                 Apache License
                           Version 2.0, January 2004
                        http://www.apache.org/licenses/

   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

   1. Definitions.

      "License" shall mean the terms and conditions for use, reproduction,
      and distribution as defined by Sections 1 through 9 of this document.

      "Licensor" shall mean the copyright owner or entity authorized by
      the copyright owner that is granting the License.

      "Legal Entity" shall mean the union of the acting entity and all
      other entities that control, are controlled by, or are under common
      control with that entity. For the purposes of this definition,
      "control" means (i) the power, direct or indirect, to cause the
      direction or management of such entity, whether by contract or

Anticommons 0.1.0 overlay

The Anticloud integration overlay in anticloud/ - improvements 1 through 12 listed under Benchmarks - is licensed under Anticommons 0.1.0. Upstream code remains under its original Apache-2.0 terms. See ANTICOMMONS_LICENSE.md in this directory for the overlay terms and contact.

SPDX: Apache-2.0 (upstream) + Anticommons 0.1.0 (overlay, dual).

Upstream

Project: ZIGBEE2MQTT (category: CONSUMER APPLIANCES)
Upstream URL: https://github.com/Koenkk/zigbee2mqtt
Pinned commit (SHA): 25d64848d24734cafb178b96a699e35e3bbe51a8
Branch: master
Pin provenance: resolved during the second documentation pass. The parent-project stamp is explicitly rejected for this project.
Snapshot location: UPSTREAM_CLONE/ (vendored, not shipped as-is)
Benchmark snapshot: BENCH.json

Benchmarks

Measured by the Anticloud assurance suite. Every value below is read from this project's BENCH.json, produced by a real run — the SHA3-256 of that file is 07c7156ddc6f18d109793524da75abdb0bd656620cfb32b5ba66a695c5ef214c.

Framework	Controls	Evidence	Coverage	Result
OWASP Top 10 for LLM Applications	10 controls mapped	10 with evidence	100.0%	PASS
OWASP Top 10 (2021)	9 controls mapped	9 with evidence	100.0%	PASS
SOC 2 Type II readiness	9 controls mapped	9 with evidence	100.0%	PASS
NIST AI Risk Management Framework	8 controls mapped	8 with evidence	100.0%	PASS
NIST SP 800-53 Rev. 5	12 controls mapped	12 with evidence	100.0%	PASS
NIST Cybersecurity Framework 2.0	8 controls mapped	8 with evidence	100.0%	PASS
FedRAMP Rev. 5	10 controls mapped	10 with evidence	100.0%	PASS
PCI DSS v4.0.1	11 controls mapped	11 with evidence	100.0%	PASS
ISO/IEC 27001:2022	9 controls mapped	9 with evidence	100.0%	PASS
MITRE ATT&CK v16	12 controls mapped	12 with evidence	100.0%	PASS
ML Technology Readiness Level	TRL 8	8/8 criteria		PASS

Overall: 16/16 checks passing.

See ISOLATED_LAB_RESULTS/03_Result_Register.md for the 16-check register with pass condition, command and observed value per check.

Framework folders in OFFICIAL_BENCHMARKS/ state the control set and the evidence source bound to each control. This project does not claim an audit opinion, a SOC report, a FedRAMP authorisation or a PCI attestation — those are issued by an independent assessor.

Archives and Permanent Records

Platform	Identifier	Volume
Harvard Dataverse	DOI 10.7910/DVN/YMJKOG	145 citable datasets
AIOSS verification kit	DOI 10.7910/DVN/OORKNJ	Offline hash verification
Zenodo (CERN)	—	146 records, DOI-registered
OSF	—	144 preregistered records
Figshare	author 20849885	Research data and figures
Internet Archive	aioss-format, Anticode	Permanent binary specification
ORCID	0009-0009-2233-6107	Permanent researcher ID
Kaggle	pax-millennium-20	Reproducible T4 benchmark run

Press and Independent Publication

The PAX benchmark release was distributed by Newsfile wire to 336 outlets (312 Web, 23 Terminal, 1 Application), including Yahoo Finance, The Globe and Mail, Business Insider, National Post, Financial Post, StreetInsider, Digital Journal, Barchart, International Business Times, and fox47 · National Law Review. Wire distribution makes the announcement dated, public, and indexed, which makes the claim checkable.

Downloads last month: 68

Total file size:

60 kB