Datasets:

Beifengdo
/

Arduino-Development

/*
  Character analysis operators
  Examples using the character analysis operators.
  Send any byte and the sketch will tell you about it.
  created 29 Nov 2010
  modified 2 Apr 2012
  by Tom Igoe
  This example code is in the public domain.
  https://www.arduino.cc/en/Tutorial/BuiltInExamples/CharacterAnalysis
*/

void setup() {
  // Open serial communications and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  // send an intro:
  Serial.println("send any byte and I'll tell you everything I can about it");
  Serial.println();
}

void loop() {
  // get any incoming bytes:
  if (Serial.available() > 0) {
    int thisChar = Serial.read();

    // say what was sent:
    Serial.print("You sent me: \'");
    Serial.write(thisChar);
    Serial.print("\'  ASCII Value: ");
    Serial.println(thisChar);

    // analyze what was sent:
    if (isAlphaNumeric(thisChar)) {
      Serial.println("it's alphanumeric");
    }
    if (isAlpha(thisChar)) {
      Serial.println("it's alphabetic");
    }
    if (isAscii(thisChar)) {
      Serial.println("it's ASCII");
    }
    if (isWhitespace(thisChar)) {
      Serial.println("it's whitespace");
    }
    if (isControl(thisChar)) {
      Serial.println("it's a control character");
    }
    if (isDigit(thisChar)) {
      Serial.println("it's a numeric digit");
    }
    if (isGraph(thisChar)) {
      Serial.println("it's a printable character that's not whitespace");
    }
    if (isLowerCase(thisChar)) {
      Serial.println("it's lower case");
    }
    if (isPrintable(thisChar)) {
      Serial.println("it's printable");
    }
    if (isPunct(thisChar)) {
      Serial.println("it's punctuation");
    }
    if (isSpace(thisChar)) {
      Serial.println("it's a space character");
    }
    if (isUpperCase(thisChar)) {
      Serial.println("it's upper case");
    }
    if (isHexadecimalDigit(thisChar)) {
      Serial.println("it's a valid hexadecimaldigit (i.e. 0 - 9, a - F, or A - F)");
    }

    // add some space and ask for another byte:
    Serial.println();
    Serial.println("Give me another byte:");
    Serial.println();
  }
}

	/*
	Character analysis operators

	Examples using the character analysis operators.
	Send any byte and the sketch will tell you about it.

	created 29 Nov 2010
	modified 2 Apr 2012
	by Tom Igoe

	This example code is in the public domain.

	https://www.arduino.cc/en/Tutorial/BuiltInExamples/CharacterAnalysis
	*/

	void setup() {
	// Open serial communications and wait for port to open:
	Serial.begin(9600);
	while (!Serial) {
	; // wait for serial port to connect. Needed for native USB port only
	}

	// send an intro:
	Serial.println("send any byte and I'll tell you everything I can about it");
	Serial.println();
	}

	void loop() {
	// get any incoming bytes:
	if (Serial.available() > 0) {
	int thisChar = Serial.read();

	// say what was sent:
	Serial.print("You sent me: \'");
	Serial.write(thisChar);
	Serial.print("\' ASCII Value: ");
	Serial.println(thisChar);

	// analyze what was sent:
	if (isAlphaNumeric(thisChar)) {
	Serial.println("it's alphanumeric");
	}
	if (isAlpha(thisChar)) {
	Serial.println("it's alphabetic");
	}
	if (isAscii(thisChar)) {
	Serial.println("it's ASCII");
	}
	if (isWhitespace(thisChar)) {
	Serial.println("it's whitespace");
	}
	if (isControl(thisChar)) {
	Serial.println("it's a control character");
	}
	if (isDigit(thisChar)) {
	Serial.println("it's a numeric digit");
	}
	if (isGraph(thisChar)) {
	Serial.println("it's a printable character that's not whitespace");
	}
	if (isLowerCase(thisChar)) {
	Serial.println("it's lower case");
	}
	if (isPrintable(thisChar)) {
	Serial.println("it's printable");
	}
	if (isPunct(thisChar)) {
	Serial.println("it's punctuation");
	}
	if (isSpace(thisChar)) {
	Serial.println("it's a space character");
	}
	if (isUpperCase(thisChar)) {
	Serial.println("it's upper case");
	}
	if (isHexadecimalDigit(thisChar)) {
	Serial.println("it's a valid hexadecimaldigit (i.e. 0 - 9, a - F, or A - F)");
	}

	// add some space and ask for another byte:
	Serial.println();
	Serial.println("Give me another byte:");
	Serial.println();
	}
	}