Download dev/MoveCube_ep1/notes/working.md from CHL0e/robomme-mfm: direct link, hf CLI and curl.
- Browser
- Download file 1.96 kB
-
https://huggingface.co/datasets/CHL0e/robomme-mfm/resolve/main/dev/MoveCube_ep1/notes/working.md
- Command line
-
hf download hf://datasets/CHL0e/robomme-mfm/dev/MoveCube_ep1/notes/working.md
-
curl -L -o working.md https://huggingface.co/datasets/CHL0e/robomme-mfm/resolve/main/dev/MoveCube_ep1/notes/working.md
Task: reproduce demo using wooden bar to push cube onto purple target, never grasp cube. Target center world (-.028,-.059,0), from pixel ray front (113,99). Bar securely held width .0178; current yaw0 (long bar axis x), tool z .015 for pushing, .17 for clearance. Cube top depth gives center xy: turn5(-.040,-.081), turn6(-.026,-.047). Turn7 push from y .030 to .008 did not contact. Turn8 push from .008 to -.022 moved cube to (-.031,-.073): about 26mm, likely motion continues after contact. Current turn9 plan: approach opposite side tool(-.015,-.120,.17), lower .015, push positive y to -.103, lift .17. For yaw0 cube/tool contact separation about .03-.05 in y. Use tiny final motions; do not overshoot again. Task status ongoing at step547; 753 control steps remain. Turn9 result cube y approx-.055, near target-.059; top-face x around-.036 (pixel11390) vs target-.028. Task ongoing. Turn10 rotate bar yaw90, approach tool(-.085,-.050), lower .015, push +x to -.065, lift. Remaining budget652 steps. Turn10 forward push overshot: cube top near(-.003,-.061) at pixel11197; y aligned. Tool x-.065 produced cube x~0, effective offset .065. Turn11 reverse push yaw90: approach(.075,-.050), lower, push to(.037,-.050), lift. Target x-.028. Budget500 steps. Turn11 cube returned over target, top pixel11394 world(-.017,-.054,.041); exact center uncertain due hand. Turn12 move clear to(-.15,-.20,.28), keep bar grasp. Need estimate cube center from red top-face pixel world bounding box via depth, not single pixel. Budget377 steps. Turn12 precise full red top-surface depth bounds center=(-.02446,-.05838,.0404), target(-.028,-.059): only 3.6mm x offset. Still ongoing after settling. Turn13 approach last contact tool(.037,-.050,.15), lower, push to x .033, stay low for inspection. 339steps remain. Turn13 tiny correction tool x .033 complete status ongoing. Turn14 lift,set bar aside at(-.1,-.24,.015),open,lift. Check clear cube after release. Budget259steps.