Add files using upload-large-folder tool

marked/Rel-11/32_series/32121/raw.md

@@ -0,0 +1,138 @@
+
+
+
+
+
+
+# --- Contents
+
+- Foreword ..... 4
+- Introduction ..... 4
+- 1 Scope..... 5
+- 2 References..... 5
+- 3 Definitions and abbreviations ..... 5
+- 3.1 Definitions..... 5
+- 3.2 Abbreviations ..... 5
+- 4 Requirements for AAM on Itf-N ..... 6
+- 4.1 Concept..... 6
+- 4.2 General Requirements for AAM on Itf-N ..... 6
+- Annex A (informative): Change history..... 7
+
+# --- Foreword
+
+This Technical Specification has been produced by the 3<sup>rd</sup> Generation Partnership Project (3GPP).
+
+The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows:
+
+Version x.y.z
+
+where:
+
+- x the first digit:
+  - 1 presented to TSG for information;
+  - 2 presented to TSG for approval;
+  - 3 or greater indicates TSG approved document under change control.
+- y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
+- z the third digit is incremented when editorial only changes have been incorporated in the document.
+
+# --- Introduction
+
+The present document is part of a TS-family covering the 3<sup>rd</sup> Generation Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below:
+
+- 32.121: "Advanced Alarm Management Integration Reference Point (IRP): Requirements";**
+- 32.122: "Advanced Alarm Management Integration Reference Point (IRP): Information Service (IS)";
+- 32.126: "Advanced Alarm Management (AAM) Integration Reference Point (IRP); Solution Set (SS) definitions".
+
+The Itf-N interface is built up by a number of IRPs and a related Name Convention, which realize the functional capabilities over this interface. The basic structure of the IRPs is defined in 3GPP TS 32.150 [1].
+
+IRPManagers (typically Network Management Systems) and IRPAgents (typically EMs or NEs) synchronize their data concerning alarms or configuration data. In certain scenarios this synchronization is lost or not done.
+
+This IRP provides functionality to significantly reduce the amount of data which needs to be transferred in order to re-establish synchronization.
+
+# --- 1 Scope
+
+The purpose of this set of specifications is to provide a mechanism enabling the IRP Manager to improve the information content of alarms, thereby contributing to reduce the time-to-repair. For this configurable rules for advanced alarm filtering are defined to reduce the number of alarms by applying such advanced alarm filtering.
+
+The present document contains the Requirements of Advanced Alarm Management (AAM) on Itf-N IRP. It defines, for the purpose of AAM on Itf-N, the basic requirements to be fulfilled on Itf-N.
+
+# --- 2 References
+
+The following documents contain provisions that, through reference in this text, constitute provisions of the present document.
+
+- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
+- For a specific reference, subsequent revisions do not apply.
+- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
+
+[1] 3GPP TS 32.150: "Telecommunication management; Integration Reference Point (IRP) Concept and definitions".
+
+# --- 3 Definitions and abbreviations
+
+## 3.1 Definitions
+
+For the purposes of the present document, the following terms and definitions apply:
+
+**IRP:** See 3GPP TS 32.150 [1].
+
+**IRP Agent:** See 3GPP TS 32.150 [1].
+
+**IRP Manager:** See 3GPP TS 32.150 [1].
+
+## 3.2 Abbreviations
+
+For the purposes of the present document, the following abbreviations apply:
+
+|       |                             |
+|-------|-----------------------------|
+| IRP   | Integration Reference Point |
+| IS    | Information Service         |
+| Itf-N | Interface N                 |
+| NE    | Network Element             |
+
+# --- 4 Requirements for AAM on Itf-N
+
+## 4.1 Concept
+
+A single network fault may generate a large number of alarms over space and time. In a large and complex network, simultaneous network faults may occur, causing the network operator to be flooded with high volume of alarms. The high volume of alarms, typically the one received by an IRP Manager via the getAlarmList or alarm notifications of Alarm IRP specification, greatly inhibits the operator ability to quickly identify and locate the responsible network faults.
+
+Therefore it is considered advantageous to have methods categorizing network alarms as insignificant or significant. The word 'insignificant' does not imply "low priority". In the context of this specification the words 'significant' and 'insignificant' have the following implications:
+
+- IRP Agent shall not report alarms categorized as insignificant.
+- IRP Agent shall report all significant alarms.
+
+Reporting only significant alarms and not reporting insignificant alarms would reduce network operator's time to locate network faults so that more time can be spent fixing them.
+
+When reading the alarmList it can be advantageous to partition alarms in the alarmList into sets of alarms which might be caused by the same network fault.
+
+By assigning network operators to locate network faults based on alarms in such alarm partitions, rather than based on alarm severity, alarm type or reporting location, duplication of network operator effort (e.g. two network operators work on two different alarms and their resolutions lead to the same network faults) can be reduced or avoided
+
+## 4.2 General Requirements for AAM on Itf-N
+
+4.2.1 The IRP Manager should be able to request the IRP Agent to
+
+- a) categorize alarms as insignificant or significant and
+  - b) to act based on these categories, e.g. to discard if insignificant.
+- The IRP Manager should be able to cancel such requests.
+
+4.2.2 The standard should define some alarm categorization rules. The standard should also allow vendor to define their own alarm categorization rules.
+
+4.2.3 Possible alarm categorization rule(s) may depend for example on the type of alarm, the environment, the time of day, the type of network element, the alarm severity, the location, position in the containment tree and many more. No restriction is imposed in this regard.
+
+4.2.4 The IRP Manager should be able to request the IRP Agent for the list of active categorization rules (i.e. standard defined and vendor defined).
+
+4.2.5 The IRP manager should be able to request the IRP Agent to apply the categorization rule(s) and to remove the insignificant alarms in the following situations:
+
+- + alarm notifications to be sent to any IRP Manager
+- + advanced alarm management requests by this IRP Manager to read the alarm list
+
+Certain types of categorization rules are only to be applied to read the alarm list. The term used for these rules is alarm partitioning rules.
+
+# Annex A (informative): Change history
+
+| Change history |       |           |    |    |                                    |                                |        |               |
+|----------------|-------|-----------|----|----|------------------------------------|--------------------------------|--------|---------------|
+| Date           | TSG # | TSG Doc.  | CR | R  | Subject/Comment                    | Cat                            | Old    | New           |
+| May 2007       | SA 36 | SP-070294 | -- | -- | Submitted to SA#36 for Information | --                             | --     | 1.0.0         |
+| Mar 2008       | SA 39 | SP-080071 | -- | -- | Submitted to SA#39 for Approval    | --                             | 2.0.0  | 8.0.0         |
+| Dec 2009       | -     | -         | -  | -  | Update to Rel-9 version (MCC)      | --                             | 8.0.0  | 9.0.0         |
+| Mar 2011       | -     | -         | -  | -  | Update to Rel-10 version (MCC)     | --                             | 9.0.0  | 10.0.0        |
+| 2012-09        | -     | -         | -  | -  | -                                  | Update to Rel-11 version (MCC) | 10.0.0 | <b>11.0.0</b> |

marked/Rel-11/32_series/32126/raw.md

@@ -0,0 +1,1067 @@
+
+
+
+
+Error! No  
+text of
+
+Error! No text of specified style in  
+document.
+
+# Contents
+
+|                                                              |           |
+|--------------------------------------------------------------|-----------|
+| Foreword .....                                               | 4         |
+| Introduction .....                                           | 4         |
+| 1 Scope.....                                                 | 5         |
+| 2 References.....                                            | 5         |
+| 3 Definitions and abbreviations .....                        | 6         |
+| 3.1 Definitions.....                                         | 6         |
+| 3.2 Abbreviations .....                                      | 7         |
+| 4 Solution Set definitions.....                              | 7         |
+| <b>Annex A (normative): CORBA Solution Set.....</b>          | <b>8</b>  |
+| A.1 Architectural features.....                              | 8         |
+| A.1.1 Syntax for Distinguished Names.....                    | 8         |
+| A.1.2 Notifications.....                                     | 8         |
+| A.2 Mapping .....                                            | 8         |
+| A.2.1 General mappings.....                                  | 8         |
+| A.2.2 Operation and notification mapping.....                | 8         |
+| A.2.3 Operation parameter mapping.....                       | 9         |
+| A.2.4 Notification parameter mapping.....                    | 9         |
+| A.3 Solution Set definitions.....                            | 10        |
+| A.3.1 IDL definition structure.....                          | 10        |
+| A.3.2 IDL specification (file name "AAMConstDefs.idl") ..... | 11        |
+| A.3.3 IDL specification (file name "AAMSystem.idl") .....    | 13        |
+| <b>Annex B (normative): XML definitions.....</b>             | <b>15</b> |
+| B.1 Architectural Features .....                             | 15        |
+| B.1.1 Syntax for Distinguished Names.....                    | 15        |
+| B.1.2 Notification Services.....                             | 15        |
+| B.1.3 IOC definitions.....                                   | 15        |
+| B.2 Mapping .....                                            | 15        |
+| B.3 Solution Set definitions.....                            | 15        |
+| B.3.1 XML definition structure .....                         | 15        |
+| B.3.2 Graphical Representation.....                          | 16        |
+| B.3.3 XML Schema "aamIRPIOCs.xsd".....                       | 17        |
+| <b>Annex C (normative): SOAP Solution Set.....</b>           | <b>19</b> |
+| C.1 Architectural features.....                              | 19        |
+| C.1.1 Syntax for Distinguished Names.....                    | 19        |
+| C.1.2 Notification Services.....                             | 19        |
+| C.1.3 Supported W3C specifications.....                      | 19        |
+| C.1.4 Prefixes and namespaces.....                           | 19        |
+| C.2 Mapping .....                                            | 20        |
+| C.2.1 Operation and notification mapping.....                | 20        |
+| C.2.2 Operation parameter mapping.....                       | 20        |
+| C.2.3 Notification parameter mapping.....                    | 20        |
+| C.3 Solution Set definitions.....                            | 21        |
+| C.3.1 WSDL definition structure .....                        | 21        |
+| C.3.2 Graphical Representation.....                          | 21        |
+| C.3.3 WSDL specification "AAMIRPSystem.wsdl".....            | 22        |
+| Annex D (informative): Change history.....                   | 25        |
+
+# --- Foreword
+
+This Technical Specification has been produced by the 3<sup>rd</sup> Generation Partnership Project (3GPP).
+
+The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows:
+
+Version x.y.z
+
+where:
+
+- x the first digit:
+  - 1 presented to TSG for information;
+  - 2 presented to TSG for approval;
+  - 3 or greater indicates TSG approved document under change control.
+- y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
+- z the third digit is incremented when editorial only changes have been incorporated in the document.
+
+# --- Introduction
+
+The present document is part of a TS-family covering the 3<sup>rd</sup> Generation Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below:
+
+- 32.121: Advanced Alarm Management (AAM) Integration Reference Point (IRP): Requirements.
+- 32.122: Advanced Alarm Management (AAM) Integration Reference Point (IRP): Information Service (IS).
+- 32.126: Advanced Alarm Management (AAM) Integration Reference Point (IRP): Solution Set (SS) definitions.**
+
+The Itf-N interface is built up by a number of IRPs and a related Name Convention, which realise the functional capabilities over this interface. The basic structure of the IRPs is defined in 3GPP TS 32.150 [4].
+
+A single network fault may generate a large number of alarms over space and time. In a large and complex network, simultaneous network faults may occur, causing the network operator to be flooded with high volume of alarms. The high volume of alarms, typically the one received by an IRPManager via the getAlarmList or alarm notifications of Alarm IRP specification, greatly inhibits the operator ability to quickly identify and locate the responsible network faults. Advanced Alarm Management IRP is intended to provide methods to improve this situation.
+
+# 1 Scope
+
+The present specifies the Solution Set definitions for the IRP whose semantics are specified in the Advanced Alarm Management (AAM) IRP Information Service (3GPP TS 32.122 [6]).
+
+This Solution Set specification is related to TS 32.122 v11.0.X.
+
+# 2 References
+
+The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
+
+- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
+- For a specific reference, subsequent revisions do not apply.
+- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document *in the same Release as the present document*.
+
+- [1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
+- [2] 3GPP TS 32.101: "Telecommunication management; Principles and high level requirements".
+- [3] 3GPP TS 32.102: "Telecommunication management; Architecture".
+- [4] 3GPP TS 32.150: "Telecommunication management; Integration Reference Point (IRP) Concept and definitions".
+- [5] 3GPP TS 32.121: "Telecommunication management; Advanced Alarm Management (AAM) Integration Reference Point (IRP): Requirements".
+- [6] 3GPP TS 32.122: "Telecommunication management; Advanced Alarm Management (AAM) Integrations Reference Point (IRP); Information Service (IS)".
+- [7] W3C REC-xml-20001006: "Extensible Markup Language (XML) 1.0 (Second Edition)".
+- [8] W3C REC-xmlschema-0-20010502: "XML Schema Part 0: Primer".
+- [9] W3C REC-xmlschema-1-20010502: "XML Schema Part 1: Structures".
+- [10] W3C REC-xmlschema-2-20010502: "XML Schema Part 2: Datatypes".
+- [11] W3C REC-xml-names-19990114: "Namespaces in XML".
+- [12] W3C SOAP 1.1 specification (<http://www.w3.org/TR/2000/NOTE-SOAP-20000508/>)
+- [13] W3C XPath 1.0 specification (<http://www.w3.org/TR/1999/REC-xpath-19991116>)
+- [14] W3C WSDL 1.1 specification (<http://www.w3.org/TR/2001/NOTE-wsdl-20010315>)
+- [15] W3C SOAP 1.2 specification (<http://www.w3.org/TR/soap12-part1/>)
+- [16] 3GPP TS 32.306: "Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP): Solution Set definitions".
+- [17] 3GPP TS 32.312: "Telecommunication management; Generic Integration Reference Point (IRP) management; Information Service (IS)"
+- [18] 3GPP TS 32.300: "Telecommunication management; Configuration Management (CM); Name convention for Managed Objects".
+
+# 3 Definitions and abbreviations
+
+## 3.1 Definitions
+
+For the purposes of the present document, the terms and definitions given in TR 21.905 [1], 3GPP TS 32.101 [2], 3GPP TS 32.102 [3], 3GPP TS 32.150 [4] apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 [1].
+
+**Alike Alarm:** Two alarms are considered alike, if the corresponding alarm notifications are issued by the same object instance with the same alarmType, same perceivedSeverity, same probableCause and same specificProblem (if present).
+
+**Lower Edge of Time Window:** The point in time which determines the begin of a time span.
+
+**Upper Edge of Time Window:** The point in time which determines the end of a time span
+
+**XML file:** file containing an XML document
+
+**XML document:** composed of the succession of an optional XML declaration followed by a root XML element
+
+NOTE: See [7]; in the scope of the present document.
+
+**XML declaration:** it specifies the version of XML being used
+
+NOTE: See [7].
+
+**XML element:** has a type, is identified by a name, may have a set of XML attribute specifications and is either composed of the succession of an XML start-tag followed by the XML content of the XML element followed by an XML end-tag, or composed simply of an XML empty-element tag; each XML element may contain other XML elements
+
+NOTE: See [7].
+
+**empty XML element:** having an empty XML content; an empty XML element still possibly has a set of XML attribute specifications; an empty XML element is either composed of the succession of an XML start-tag directly followed by an XML end-tag, or composed simply of an XML empty-element tag
+
+NOTE: See [7].
+
+**XML content (of an XML element):** empty if the XML element is simply composed of an XML empty-element tag; otherwise the part, possibly empty, of the XML element between its XML start-tag and its XML end-tag
+
+**XML start-tag:** the beginning of a non-empty XML element is marked by an XML start-tag containing the name and the set of XML attribute specifications of the XML element
+
+NOTE: See [7].
+
+**XML end-tag:** the end of a non-empty XML element is marked by an XML end-tag containing the name of the XML element
+
+NOTE: See [7].
+
+**XML empty-element tag:** composed simply of an empty-element tag containing the name and the set of XML attribute specifications of the XML element.
+
+NOTE: See [7].
+
+**XML attribute specification:** has a name and a value
+
+NOTE: See [7].
+
+**DTD:** defines structure and content constraints to be respected by an XML document to be valid with regard to this DTD
+
+NOTE: See [7].
+
+**XML schema:** more powerful than a DTD, an XML schema defines structure and content constraints to be respected by an XML document to conform with this XML schema; through the use of XML namespaces several XML schemas can be used together by a single XML document; an XML schema is itself also an XML document that shall conform with the XML schema for XML schemas
+
+NOTE: See [8], [9] and [10].
+
+**XML namespace:** enables qualifying element and attribute names used in XML documents by associating them with namespaces identified by different XML schemas
+
+NOTE: See [11], in the scope of the present document.
+
+**XML complex type:** defined in an XML schema; cannot be directly used in an XML document; can be the concrete type or the derivation base type for an XML element type or for another XML complex type; ultimately defines constraints for an XML element on its XML attribute specifications and/or its XML content
+
+NOTE: See [8], [9] and [10].
+
+**XML element type:** declared by an XML schema; can be directly used in an XML document; as the concrete type of an XML element, directly or indirectly defines constraints on its XML attribute specifications and/or its XML content; can also be the concrete type or the derivation base type for another XML element type
+
+NOTE: See [8], [9] and [10].
+
+## 3.2 Abbreviations
+
+For the purposes of the present document, the abbreviations given in TR 21.905 [1], in 3GPP TS 32.101 [2], 3GPP TS 32.102 [3], 3GPP TS 32.150 [4], and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 [1].
+
+|         |                                |
+|---------|--------------------------------|
+| AAM     | Advanced Alarm Management      |
+| AAMRule | Advanced Alarm Management Rule |
+| CM      | Configuration Management       |
+| EM      | Element Manager                |
+| IOC     | Information Object Class       |
+| IRP     | Integration Reference Point    |
+| IS      | Information Service            |
+| Itf-N   | Interface N                    |
+| MIB     | Management Information Base    |
+| NE      | Network Element                |
+| XML     | eXtensible Markup Language     |
+
+# --- 4 Solution Set definitions
+
+This specification defines the following 3GPP Advance Alarm Management IRP Solution Set definitions:
+
+Annex A provides the CORBA Solution Set.
+
+Annex B provides the XML Definitions.
+
+Annex C provides the SOAP Solution Set.
+
+# Annex A (normative): CORBA Solution Set
+
+This annex contains the CORBA Solution Set for the IRP whose semantics is specified in AAM IRP: Information Service (3GPP TS 32.122 [6]).
+
+## A.1 Architectural features
+
+The overall architectural feature of Advanced Alarm Management IRP is specified in 3GPP TS 32.122 [6]
+
+### A.1.1 Syntax for Distinguished Names
+
+The syntax of a Distinguished Name is defined in 3GPP TS 32.300[18]
+
+### A.1.2 Notifications
+
+Notifications are sent according to the Notification IRP: CORBA SS (see 3GPP TS 32.306 [16]).
+
+Currently there are no AAM IRP notifications defined in 3GPP TS 32.122 [6].
+
+## A.2 Mapping
+
+### A.2.1 General mappings
+
+Not applicable.
+
+### A.2.2 Operation and notification mapping
+
+The AAM IS (3GPP TS 32.122 [6]) defines semantics of operations visible across the Itf-N.
+
+Table A.2.2-1 indicates mapping of these operations and notifications to their equivalents defined in this CORBA SS.
+
+**Table A.2.2-1: Mapping from IS Operation to SS equivalents**
+
+| IS Operation / Notification<br>(3GPP TS 32.122) | SS Method           | Qualifier |
+|-------------------------------------------------|---------------------|-----------|
+| activateAAMRule                                 | activate_aam_rule   | M         |
+| getAAMRules                                     | get_aam_rules       | M         |
+| deactivateAAMRule                               | deactivate_aam_rule | M         |
+
+### A.2.3 Operation parameter mapping
+
+The AAM IS (3GPP TS 32.122 [6]) defines semantics of parameters carried in operations across the Itf-N. The following tables indicate the mapping of these parameters, as per operation, to their equivalents defined in this CORBA SS.
+
+**Table A.2.3-1: Mapping from IS `activate_aam_rule` parameters to SS equivalents**
+
+| IS Operation parameter               | SS Method parameter                                                                                                                                                                                                                                                                                                                                                                   | Qualifier |
+|--------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------|
+| <code>aam_rule_type</code>           | <code>AAMConstDefs::AAMRuleType</code>                                                                                                                                                                                                                                                                                                                                                | M         |
+| <code>aam_rule_parameter_list</code> | <code>AAMConstDefs::AAMRuleParameterList</code>                                                                                                                                                                                                                                                                                                                                       | M         |
+| <code>filter</code>                  | <code>AdvancedAlarmManagementConstDefs::FilterType</code>                                                                                                                                                                                                                                                                                                                             | M         |
+| <code>status</code>                  | Exceptions:<br><code>AAMConstDefs::ActivateAAMRule</code> ,<br><code>AAMConstDefs::AAMRuleAlreadyActive</code> ,<br><code>GenericIRPManagementSystem::ParameterNotSupported</code> ,<br><code>GenericIRPManagementSystem::InvalidParameter</code> ,<br><code>GenericIRPManagementSystem::ValueNotSupported</code> ,<br><code>GenericIRPManagementSystem::OperationNotSupported</code> | M         |
+| <code>aam_rule_identifier</code>     | <code>AAMConstDefs::AAMRuleIdentifier</code>                                                                                                                                                                                                                                                                                                                                          | M         |
+
+**Table A.2.3-2: Mapping from IS `get_advanced_alarm_management_rules` parameters to SS equivalents**
+
+| IS Operation parameter     | SS Method parameter                                                                                                                                                                                                                                                                                                          | Qualifier |
+|----------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------|
+| <code>aam_rule_list</code> | <code>AAMConstDefs::AAMRuleList</code>                                                                                                                                                                                                                                                                                       | M         |
+| <code>Status</code>        | Exceptions:<br><code>AAMConstDefs::GetAAMRules</code> ,<br><code>GenericIRPManagementSystem::ParameterNotSupported</code> ,<br><code>GenericIRPManagementSystem::InvalidParameter</code> ,<br><code>GenericIRPManagementSystem::ValueNotSupported</code> ,<br><code>GenericIRPManagementSystem::OperationNotSupported</code> | M         |
+
+**Table A.2.3-3: Mapping from IS `deactivate_aam_rule` parameters to SS equivalents**
+
+| IS Operation parameter           | SS Method parameter                                                                                                                                                                                                                                                                                                                                                                         | Qualifier |
+|----------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------|
+| <code>aam_rule_identifier</code> | <code>AAMConstDefs::AAMRuleIdentifier</code>                                                                                                                                                                                                                                                                                                                                                | M         |
+| <code>Status</code>              | Exceptions:<br><code>AAMConstDefs::DeactivateAAMRule</code> ,<br><code>AAMConstDefs::SpecifiedRuleNotExisting</code> ,<br><code>GenericIRPManagementSystem::ParameterNotSupported</code> ,<br><code>GenericIRPManagementSystem::InvalidParameter</code> ,<br><code>GenericIRPManagementSystem::ValueNotSupported</code> ,<br><code>GenericIRPManagementSystem::OperationNotSupported</code> | M         |
+
+### A.2.4 Notification parameter mapping
+
+None.
+
+## --- A.3 Solution Set definitions
+
+### A.3.1 IDL definition structure
+
+Clause A.3.2 defines the constants and types used by the AAM IRP.
+
+Clause A.3.3 defines the operations which are performed by the AAM IRP agent.
+
+### A.3.2 IDL specification (file name "AAMConstDefs.idl")
+
+```
+
+// File: AAMConstDefs.idl
+#ifndef _AAM_CONST_DEFS_IDL_
+#define _AAM_CONST_DEFS_IDL_
+
+// This statement must appear after all include statements
+#pragma prefix "3gppsa5.org"
+
+/* ## Module: AAMConstDefs */
+
+module AAMConstDefs
+{
+
+/*****
+ * definition of types used in several operations for Advanced Alarm Management */
+/*****/
+
+enum AAMRuleType {
+    THRESHOLD_RULE,
+    TRANSIENT_RULE,
+    TOGGLE_RULE,
+    VENDOR_SPECIFIC_RULE
+};
+
+enum Status {SUCCESS, FAILURE, AAM_RULE_ALREADY_ACTIVE };
+
+typedef string AAMRuleIdentifier;
+
+/*****
+ * types used in operation activateAAMRule and */
+ * types used in operation getAAMRules */
+/*****/
+
+typedef string FilterType;
+
+typedef string TimeSpan;
+typedef string AlarmOccurenceThreshold;
+typedef string SlidingTimeWindow;
+
+struct AAMRuleParameterListForTransientRule
+{
+    TimeSpan time_span;
+};
+
+struct AAMRuleParameterListForThresholdRule
+{
+    AlarmOccurenceThreshold alarm_occurence_threshold;
+    SlidingTimeWindow sliding_time_window;
+};
+
+struct AAMRuleParameterListForToggleRule
+{
+    AlarmOccurenceThreshold alarm_occurence_threshold;
+    SlidingTimeWindow sliding_time_window_toggling_started;
+    SlidingTimeWindow sliding_time_window_toggling_settled;
+};
+
+typedef string VendorSpecificParameterIdentifier;
+typedef string VendorSpecificParameterValue;
+
+struct VendorSpecificParameter
+{
+    VendorSpecificParameterIdentifier vendor_specific_parameter_identifier;
+    VendorSpecificParameterValue vendor_specific_parameter_value;
+};
+
+typedef sequence <VendorSpecificParameter> AAMRuleParameterListForVendorSpecificRule;
+
+/* The AAMRuleParameterList may contain a list of */
+
+```
+
+```
+
+/* AAMParameters with different content depending on the */
+/* AAMRuleType. */
+union AAMRuleParameterList switch (AAMRuleType)
+{
+    case THRESHOLD_RULE: AAMRuleParameterListForTransientRule
+        aam_rule_parameter_list_for_transient_rule;
+    case TRANSIENT_RULE: AAMRuleParameterListForThresholdRule
+        aam_rule_parameter_list_for_threshold_rule;
+    case TOGGLE_RULE: AAMRuleParameterListForToggleRule
+        aam_rule_parameter_list_for_toggle_rule;
+    case VENDOR_SPECIFIC_RULE: AAMRuleParameterListForVendorSpecificRule
+        aam_rule_parameter_list_for_vendor_specificRule;
+};
+
+struct AAMRule
+{
+    AAMRuleIdentifier aam_rule_identifier;
+    AAMRuleType aam_rule_type;
+    AAMRuleParameterList aam_rule_parameter_list;
+    FilterType filter;
+};
+
+typedef sequence <AAMRule> AAMRuleList;
+
+/*****
+ * types used in operation deactivateAAMRule only */
+/*****
+
+ * none */
+
+);
+
+#endif // _AAM_CONST_DEFS_IDL_
+
+```
+
+### A.3.3 IDL specification (file name "AAMSystem.idl")
+
+```
+//File: AAMSystem.idl
+#ifndef _AAM_SYSTEM_IDL_
+#define _AAM_SYSTEM_IDL_
+
+#include <AAMConstDefs.idl>
+#include <GenericIRPManagementSystem.idl>
+
+// This statement must appear after all include statements
+#pragma prefix "3gppsa5.org"
+
+/* ## Module: AAMSystem */
+
+module AdvancedAlarmManagementIRPOperation_1
+{
+
+    /*
+    If the system fails to complete an operation, then it can provide a reason
+    to qualify the exception. The semantics carried in this reason are outside
+    the scope of the present document.
+    */
+
+    exception ActivateAAMRule { string reason; };
+    exception AAMRuleAlreadyActive { string reason; };
+    exception GetAAMRules { string reason; };
+    exception DeactivateAAMRule { string reason; };
+    exception SpecifiedRuleNotExisting { string reason; };
+
+    interface AdvancedAlarmManagement
+    {
+
+        AAMConstDefs::Status activate_aam_rule
+        /* for the purpose of this operation see 3GPP TS 32.322 */
+        (
+            in AAMConstDefs::AAMRuleType
+                aam_rule_type,
+            in AAMConstDefs::AAMRuleParameterList
+                aam_rule_parameter_list,
+            in AAMConstDefs::FilterType filter,
+            out AAMConstDefs::AAMRuleIdentifier
+                aam_rule_identifier
+        )
+        raises
+        (
+            ActivateAAMRule,
+            AAMRuleAlreadyActive,
+            GenericIRPManagementSystem::ParameterNotSupported,
+            GenericIRPManagementSystem::InvalidParameter,
+            GenericIRPManagementSystem::ValueNotSupported,
+            GenericIRPManagementSystem::OperationNotSupported
+        );
+
+        AAMConstDefs::Status get_aam_rules
+        /* for the purpose of this operation see 3GPP TS 32.322 */
+        (
+            out AAMConstDefs::AAMRuleList
+                aam_rule_list
+        )
+        raises
+        (
+            GetAAMRules,
+            GenericIRPManagementSystem::ParameterNotSupported,
+            GenericIRPManagementSystem::InvalidParameter,
+            GenericIRPManagementSystem::ValueNotSupported,
+            GenericIRPManagementSystem::OperationNotSupported
+        );
+
+        AAMConstDefs::Status deactivate_aam_rule
+        /* for the purpose of this operation see 3GPP TS 32.322 */
+        (
+            in AAMConstDefs::AAMRuleIdentifier
+                aam_rule_identifier
+        )
+        raises
+    }
+}
+```
+
+```
+    (
+        DeactivateAAMRule,
+        SpecifiedRuleNotExisting,
+        GenericIRPManagementSystem::ParameterNotSupported,
+        GenericIRPManagementSystem::InvalidParameter,
+        GenericIRPManagementSystem::ValueNotSupported,
+        GenericIRPManagementSystem::OperationNotSupported
+    );
+
+};
+
+};
+#endif // _AAM_SYSTEM_IDL_
+```
+
+# --- Annex B (normative): XML definitions
+
+This annex contains the XML Definitions for the Advance Alarm Management Integration Reference Point (AAM IRP) as it applies to Itf-N, in accordance with AAM IRP IS definitions [6]
+
+## --- B.1 Architectural Features
+
+The overall architectural feature of AAM IRP is specified in 3G TS 32.122 [6]. This clause specifies features that are specific to the XML definitions.
+
+### B.1.1 Syntax for Distinguished Names
+
+The syntax of a Distinguished Name is defined in 3GPP TS 32.300[18].
+
+### B.1.2 Notification Services
+
+Currently there are no AAM IRP notifications defined in 3GPP TS 32.122 [6].
+
+### B.1.3 IOC definitions
+
+This annex defines the XML syntax for the IOC definitions of the AAM IRP IS [6], which are used by the XML definitions for the AAM IRP notifications and the AAM IRP IS operations.
+
+## --- B.2 Mapping
+
+Not present in the current version of this specification.
+
+## --- B.3 Solution Set definitions
+
+### B.3.1 XML definition structure
+
+Clause B.3.2 provides a graphical representation of the XML elements.
+
+Clause B.3.3 provides XML definitions of AAM IOC as defined in [6].
+
+### B.3.2 Graphical Representation
+
+![UML Class Diagram showing AdvancedAlarmManagementRule and its associations with various parameter lists and their contents.](16152cf1d84aea10848758f51a91ff6a_img.jpg)
+
+```
+classDiagram
+    class AdvancedAlarmManagementRule
+    class xaa:AAMRuleParameterListForTransientRule
+    class xaa:AAMRuleParameterListForThresholdRule
+    class xaa:AAMRuleParameterListForToggleRule
+    class xaa:AAMRuleParameterListForVendorSpecificRule
+    class xaa:TimeSpan
+    class xaa:AlarmOccurenceThreshold
+    class xaa:SlidingTimeWindow
+    class xaa:SlidingTimeWindowTogglin...
+    class xaa:VendorSpecificParameter
+    class xaa:VendorSpecificParameterId...
+    class xaa:VendorSpecificParameterVa...
+
+    AdvancedAlarmManagementRule --> xaa:AAMRuleParameterListForTransientRule
+    AdvancedAlarmManagementRule --> xaa:AAMRuleParameterListForThresholdRule
+    AdvancedAlarmManagementRule --> xaa:AAMRuleParameterListForToggleRule
+    AdvancedAlarmManagementRule --> xaa:AAMRuleParameterListForVendorSpecificRule
+
+    xaa:AAMRuleParameterListForTransientRule --> xaa:TimeSpan
+    xaa:AAMRuleParameterListForThresholdRule --> xaa:AlarmOccurenceThreshold
+    xaa:AAMRuleParameterListForThresholdRule --> xaa:SlidingTimeWindow
+    xaa:AAMRuleParameterListForToggleRule --> xaa:AlarmOccurenceThreshold
+    xaa:AAMRuleParameterListForToggleRule --> xaa:SlidingTimeWindowTogglin...
+    xaa:AAMRuleParameterListForToggleRule --> xaa:SlidingTimeWindowTogglin...
+    xaa:AAMRuleParameterListForVendorSpecificRule --> xaa:VendorSpecificParameter
+    xaa:VendorSpecificParameter --> xaa:VendorSpecificParameterId...
+    xaa:VendorSpecificParameter --> xaa:VendorSpecificParameterVa...
+```
+
+The diagram illustrates the structure of **AdvancedAlarmManagementRule** and its associated parameter lists. The root class, **AdvancedAlarmManagementRule**, is shown on the left. It has four associations leading to different parameter list classes, each enclosed in a yellow box:
+
+- xaa:AAMRuleParameterListForTransientRule**: Contains the attribute **xaa:TimeSpan**.
+- xaa:AAMRuleParameterListForThresholdRule**: Contains the attributes **xaa:AlarmOccurenceThreshold** and **xaa:SlidingTimeWindow**.
+- xaa:AAMRuleParameterListForToggleRule**: Contains the attributes **xaa:AlarmOccurenceThreshold**, **xaa:SlidingTimeWindowTogglin...**, and **xaa:SlidingTimeWindowTogglin...**.
+- xaa:AAMRuleParameterListForVendorSpecificRule**: Contains the attribute **xaa:VendorSpecificParameter**. This attribute is further associated with a class **xaa:VendorSpecificParameter** (also in a yellow box), which contains the attributes **xaa:VendorSpecificParameterId...** and **xaa:VendorSpecificParameterVa...**. The association between **xaa:VendorSpecificParameter** and **xaa:VendorSpecificParameter** has a multiplicity of **1..∞**.
+
+UML Class Diagram showing AdvancedAlarmManagementRule and its associations with various parameter lists and their contents.
+
+### B.3.3 XML Schema “aamIRPIOCs.xsd”
+
+```
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  3GPP TS 32.126 AAMIRP IOC XML Schema
+  aamIRPIOCs.xsd
+-->
+<schema xmlns:xaa="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#aamIRPIOCs"
+  xmlns="http://www.w3.org/2001/XMLSchema"
+  targetNamespace="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#aamIRPIOCs"
+  elementFormDefault="qualified" attributeFormDefault="unqualified">
+  <simpleType name="AdvancedAlarmManagementRuleIdentifier">
+    <restriction base="string">
+      <length value="64"/>
+    </restriction>
+  </simpleType>
+  <simpleType name="AdvancedAlarmManagementRuleType">
+    <restriction base="string">
+      <enumeration value="THRESHOLD_RULE"/>
+      <enumeration value="TRANSIENT_RULE"/>
+      <enumeration value="TOGGLE_RULE"/>
+      <enumeration value="VENDOR_SPECIFIC_RULE"/>
+    </restriction>
+  </simpleType>
+  <simpleType name="TimeSpan">
+    <restriction base="string">
+      <length value="3"/>
+    </restriction>
+  </simpleType>
+  <complexType name="AAMRuleParameterListForTransientRule">
+    <sequence>
+      <element name="TimeSpan" type="xaa:TimeSpan"/>
+    </sequence>
+  </complexType>
+  <simpleType name="AlarmOccurenceThreshold">
+    <restriction base="string">
+      <length value="3"/>
+    </restriction>
+  </simpleType>
+  <simpleType name="SlidingTimeWindow">
+    <restriction base="string">
+      <length value="3"/>
+    </restriction>
+  </simpleType>
+  <complexType name="AAMRuleParameterListForThresholdRule">
+    <sequence>
+      <element name="AlarmOccurenceThreshold" type="xaa:AlarmOccurenceThreshold"/>
+      <element name="SlidingTimeWindow" type="xaa:SlidingTimeWindow"/>
+    </sequence>
+  </complexType>
+  <complexType name="AAMRuleParameterListForToggleRule">
+    <sequence>
+      <element name="AlarmOccurenceThreshold" type="xaa:AlarmOccurenceThreshold"/>
+      <element name="SlidingTimeWindowTogglingStarted" type="xaa:SlidingTimeWindow"/>
+      <element name="SlidingTimeWindowTogglingSettled" type="xaa:SlidingTimeWindow"/>
+    </sequence>
+  </complexType>
+  <simpleType name="VendorSpecificParameterIdentifier">
+    <restriction base="string">
+      <length value="64"/>
+    </restriction>
+  </simpleType>
+  <simpleType name="VendorSpecificParameterValue">
+    <restriction base="string">
+      <length value="64"/>
+    </restriction>
+  </simpleType>
+  <complexType name="VendorSpecificParameter">
+    <sequence>
+      <element name="VendorSpecificParameterIdentifier"
+        type="xaa:VendorSpecificParameterIdentifier"/>
+      <element name="VendorSpecificParameterValue" type="xaa:VendorSpecificParameterValue"/>
+    </sequence>
+  </complexType>
+  <complexType name="AAMRuleParameterListForVendorSpecificRule">
+    <sequence>
+```
+
+```
+<!--
+-->
+<element name="VendorSpecificParameter" type="xaa:VendorSpecificParameter"
+maxOccurs="unbounded"/>
+</sequence>
+</complexType>
+<complexType name="AdvancedAlarmManagementRuleParameterList">
+  <choice>
+    <element name="AAMRuleParameterListForTransientRule"
+type="xaa:AAMRuleParameterListForTransientRule"/>
+    <element name="AAMRuleParameterListForThresholdRule"
+type="xaa:AAMRuleParameterListForThresholdRule"/>
+    <element name="AAMRuleParameterListForToggleRule"
+type="xaa:AAMRuleParameterListForToggleRule"/>
+    <element name="AAMRuleParameterListForVendorSpecificRule"
+type="xaa:AAMRuleParameterListForVendorSpecificRule"/>
+  </choice>
+</complexType>
+<simpleType name="Filter">
+  <restriction base="string">
+    <length value="256"/>
+  </restriction>
+</simpleType>
+<!-- Attributes of the advancedAlarmManagementRule IOC -->
+<element name="advancedAlarmManagementRuleIdentifier"
+type="xaa:AdvancedAlarmManagementRuleIdentifier"/>
+<element name="advancedAlarmManagementRuleType" type="xaa:AdvancedAlarmManagementRuleType"/>
+<element name="advancedAlarmManagementRuleParameterList"
+type="xaa:AdvancedAlarmManagementRuleParameterList"/>
+<element name="filter" type="xaa:Filter"/>
+</schema>
+```
+
+# Annex C (normative): SOAP Solution Set
+
+This annex specifies the SOAP Solution Set for the IRP whose semantics are specified in AAM IRP: Information Service (3GPP TS 32.122 [6]).
+
+## C.1 Architectural features
+
+The overall architectural feature of the AAM IRP is specified in 3GPP TS 32.122 [6]. This clause specifies features that are specific to the SOAP Solution Set.
+
+### C.1.1 Syntax for Distinguished Names
+
+The syntax of a Distinguished Name is defined in 3GPP TS 32.300[18].
+
+### C.1.2 Notification Services
+
+Currently there are no AAM IRP notifications defined in 3GPP TS 32.122 [6].
+
+### C.1.3 Supported W3C specifications
+
+The overall architectural feature of the Advanced Alarm Management IRP is specified in 3GPP TS 32.122 [6]. This clause specifies features that are specific to the SOAP solution set.
+
+The SOAP 1.1 specification [12] and WSDL 1.1 specification [14] are supported.
+
+The SOAP 1.2 specification [15] is supported optionally.
+
+This specification uses "document" style in WSDL file.
+
+This specification uses "literal" encoding style in WSDL file.
+
+The filter language used in the SS is the XPath Language (see W3C XPath 1.0 specification [13]). IRPAgents may throw a FilterComplexityLimit fault when a given filter is too complex.
+
+### C.1.4 Prefixes and namespaces
+
+This specification uses a number of namespace prefixes throughout that are listed in Table C.1.4.
+
+**Table C.1.4: Prefixes and Namespaces used in this specification**
+
+| PREFIX           | NAMESPACE                                                                                                                                                                     |
+|------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| (no prefix)      | <a href="http://schemas.xmlsoap.org/wsdl/">http://schemas.xmlsoap.org/wsdl/</a>                                                                                               |
+| soap             | <a href="http://schemas.xmlsoap.org/wsdl/soap/">http://schemas.xmlsoap.org/wsdl/soap/</a>                                                                                     |
+| aamIRPSystem     | <a href="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPSystem">http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPSystem</a>                         |
+| aamIRPData       | <a href="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPData">http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPData</a>                             |
+| aam              | <a href="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#aamIRP">http://www.3gpp.org/ftp/specs/archive/32_series/32.126#aamIRP</a>                                     |
+| xn               | <a href="http://www.3gpp.org/ftp/specs/archive/32_series/32.626#genericNrm">http://www.3gpp.org/ftp/specs/archive/32_series/32.626#genericNrm</a>                             |
+| genericIRPSystem | <a href="http://www.3gpp.org/ftp/specs/archive/32_series/32.316#GenericIRPSystem">http://www.3gpp.org/ftp/specs/archive/32_series/32.316#GenericIRPSystem</a>                 |
+| ntfIRPNtfSystem  | <a href="http://www.3gpp.org/ftp/specs/archive/32_series/32.306#NotificationIRPNtfSystem">http://www.3gpp.org/ftp/specs/archive/32_series/32.306#NotificationIRPNtfSystem</a> |
+
+## C.2 Mapping
+
+### C.2.1 Operation and notification mapping
+
+The Advanced Alarm Management IRP IS (3GPP TS 32.122 [6]) defines semantics of operation and notification visible across the Itf-N. Table C.2.1 indicates mapping of these operations and notifications to their equivalents defined in this SS.
+
+**Table C.2.1: Mapping from IS Operation to SS Equivalents**
+
+| IS Operations in 3GPP TS 32.122 [6] | SS Operations          | Qualifier |
+|-------------------------------------|------------------------|-----------|
+| activateAAMRule                     | activateAAMRule        | M         |
+| getAAMRules                         | getAAMRules            | M         |
+| deactivateAAMRule                   | deactivateAAMRule      | M         |
+| getIRPVersion (note 1)              | getIRPVersion          | M         |
+| getOperationProfile (note 1)        | getOperationProfile    | O         |
+| getNotificationProfile (note 1)     | getNotificationProfile | O         |
+
+NOTE 1: These 3 operations are operations of ManagedGenericIRP IOC specified in 3GPP TS 32.312 [17]. The AdvancedAlarmManagementIRP IOC of 3GPP TS 32.122 [6] inherits from it.
+
+### C.2.2 Operation parameter mapping
+
+The Advanced Alarm Management IRP IS (3GPP TS 32.122 [6]) defines semantics of parameters carried in the operations. The tables below show the mapping of these parameters, as per operation, to their equivalents defined in this SS.
+
+**Table C.2.2.1: Mapping from IS activateAAMRule parameters to SS equivalents**
+
+| IS Operation parameter | SS Method parameter  | Qualifier |
+|------------------------|----------------------|-----------|
+| aAMRuleType            | aAMRuleType          | M         |
+| aAMRuleParameterList   | aAMRuleParameterList | M         |
+| filter                 | filter               | M         |
+| aAMRuleIdentifier      | aAMRuleIdentifier    | M         |
+| status                 | status               | M         |
+
+**Table C.2.2.2: Mapping from IS getAAMRules parameters to SS equivalents**
+
+| IS Operation parameter | SS Method parameter | Qualifier |
+|------------------------|---------------------|-----------|
+| aAMRuleList            | aAMRuleList         | M         |
+| status                 | status              | M         |
+
+**Table C.2.2.3: Mapping from IS deactivateAAMRule parameters to SS equivalents**
+
+| IS Operation parameter                | SS Method parameter                   | Qualifier |
+|---------------------------------------|---------------------------------------|-----------|
+| advancedAlarmManagementRuleIdentifier | advancedAlarmManagementRuleIdentifier | M         |
+| status                                | status                                | M         |
+
+### C.2.3 Notification parameter mapping
+
+The Advance Alarm Management IRP IS (3GPP TS 32.122 [6]) does not currently define any notifications.
+
+## C.3 Solution Set definitions
+
+### C.3.1 WSDL definition structure
+
+Clause C.3.2 provides a graphical representation of the AAM IRP service.
+
+Clause C.3.3 defines the services which are supported the AAM IRP agent.
+
+### C.3.2 Graphical Representation
+
+The WSDL structure is depicted in Figure C.3.2 below, depicting port type, binding and service. The port type contains port type operations, which again contains input, output and fault messages. The binding contains binding operations, which have the same name as the port type operations. The binding connects to a port inside the service.
+
+![WSDL structure diagram showing AAMIRPortType, AAMIRPBinding, and AAMIRPService components and their relationships.](4cc7cdce3d498d8b0ba033a9be24ade5_img.jpg)
+
+The diagram illustrates the WSDL structure for the Advance Alarm IRP SOAP Solution Set. It consists of three main components arranged horizontally, connected by dashed lines indicating relationships.
+
+- AAMIRPortType**: A box containing three operations: `activateAAMRule`, `getAAMRules`, and `deactivateAAMRule`. Each operation is preceded by a small icon representing a message flow.
+- AAMIRPBinding**: A box containing the same three operations: `activateAAMRule`, `getAAMRules`, and `deactivateAAMRule`. Each operation is followed by a `doc` link. Above the operations, it specifies the transport: `http://schemas.xmlsoap.org/soap/http`. This box is connected to the PortType box by a dashed line.
+- AAMIRPService**: A box containing two ports: **AAMIRPPort** and **GenericIRPPort**.
+  - AAMIRPPort**: Location: `http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRP`
+  - GenericIRPPort**: Binding: `genericIRPSystem:GenericIRPBinding`, Location: `http://www.3gpp.org/ftp/specs/archive/32_series/32.316#GenericIRP`This box is connected to the Binding box by a dashed line.
+
+WSDL structure diagram showing AAMIRPortType, AAMIRPBinding, and AAMIRPService components and their relationships.
+
+Figure C.3.2: Advance Alarm IRP SOAP Solution Set WSDL structure
+
+### C.3.3 WSDL specification “AAMIRPSystem.wsdl”
+
+```
+
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+    3GPP TS 32.126 Advanced Alarm Management (AAM) IRP SOAP Solution Set
+-->
+<definitions xmlns="http://schemas.xmlsoap.org/wsdl/"
+    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
+    xmlns:aamIRPSystem="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPSystem"
+    xmlns:aamIRPData="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPData"
+    xmlns:xaa="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#aamIRPIOCs"
+    xmlns:genericIRPSystem="http://www.3gpp.org/ftp/specs/archive/32_series/32.316#GenericIRPSystem"
+    targetNamespace="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPSystem"
+    <import namespace="http://www.3gpp.org/ftp/specs/archive/32_series/32.316#GenericIRPSystem"/>
+    <types>
+        <schema targetNamespace="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRPData"
+            xmlns="http://www.w3.org/2001/XMLSchema">
+            <import namespace="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#aamIRPIOCs"/>
+            <!-- The following types are defined for the AAM IRP operations -->
+            <complexType name="AdvancedAlarmRule">
+                <sequence>
+                    <element name="AdvancedAlarmRuleIdentifier"
+                        type="xaa:AdvancedAlarmManagementRuleIdentifier"/>
+                    <element name="AdvancedAlarmRuleType" type="xaa:AdvancedAlarmManagementRuleType"/>
+                    <element name="AdvancedAlarmManagementRuleParameterList"
+                        type="xaa:AdvancedAlarmManagementRuleParameterList"/>
+                    <element name="Filter" type="xaa:Filter"/>
+                </sequence>
+            </complexType>
+            <complexType name="AdvancedAlarmRuleList">
+                <sequence>
+                    <element name="AdvancedAlarmRule" type="aamIRPData:AdvancedAlarmRule"
+                        maxOccurs="unbounded"/>
+                </sequence>
+            </complexType>
+            <simpleType name="Status">
+                <restriction base="string">
+                    <enumeration value="Success"/>
+                    <enumeration value="AAMRuleAlreadyActive"/>
+                    <enumeration value="SpecifiedRuleNotExisting"/>
+                    <enumeration value="Failure"/>
+                </restriction>
+            </simpleType>
+            <!-- activateAAMRule Request-->
+            <element name="activateAAMRule">
+                <complexType>
+                    <sequence>
+                        <element name="advancedAlarmManagementRuleType"
+                            type="xaa:AdvancedAlarmManagementRuleType"/>
+                        <element name="advancedAlarmManagementRuleParameterList"
+                            type="xaa:AdvancedAlarmManagementRuleParameterList"/>
+                        <element name="filter" type="xaa:Filter"/>
+                    </sequence>
+                </complexType>
+            </element>
+            <!-- activateAAMRule Response -->
+            <element name="activateAAMRuleResponse">
+                <complexType>
+                    <sequence>
+                        <element name="advancedAlarmManagementRuleIdentifier"
+                            type="xaa:AdvancedAlarmManagementRuleIdentifier"/>
+                        <element name="status" type="aamIRPData:Status"/>
+                    </sequence>
+                </complexType>
+            </element>
+            <!-- activateAAMRule Fault -->
+            <element name="activateAAMRuleFault">
+                <simpleType>
+                    <restriction base="string">
+                        <enumeration value="OPERATION_FAILED"/>
+                    </restriction>
+                </simpleType>
+            </element>
+            <!-- getAAMRules Request-->
+            <element name="getAAMRules">
+                <!-- no input parameter -->
+                <complexType>
+
+```
+
+```
+
+        <sequence>
+          <element name="dummy" type="string" minOccurs="0"/>
+        </sequence>
+      </complexType>
+    </element>
+    <!-- getAAMRules Response -->
+    <element name="getAAMRulesResponse">
+      <complexType>
+        <sequence>
+          <element name="advancedAlarmRuleList" type="aamIRPData:AdvancedAlarmRuleList"/>
+          <element name="status" type="aamIRPData:Status"/>
+        </sequence>
+      </complexType>
+    </element>
+    <!-- getAAMRules Fault -->
+    <element name="getAAMRulesFault">
+      <simpleType>
+        <restriction base="string">
+          <enumeration value="OPERATION_FAILED"/>
+        </restriction>
+      </simpleType>
+    </element>
+    <!-- deactivateAAMRule Request-->
+    <element name="deactivateAAMRule">
+      <complexType>
+        <sequence>
+          <element name="advancedAlarmManagementRuleIdentifier"
+type="xaa:AdvancedAlarmManagementRuleIdentifier"/>
+        </sequence>
+      </complexType>
+    </element>
+    <!-- deactivateAAMRule Response -->
+    <element name="deactivateAAMRuleResponse">
+      <complexType>
+        <sequence>
+          <element name="status" type="aamIRPData:Status"/>
+        </sequence>
+      </complexType>
+    </element>
+    <!-- deactivateAAMRule Fault -->
+    <element name="deactivateAAMRuleFault">
+      <simpleType>
+        <restriction base="string">
+          <enumeration value="OPERATION_FAILED"/>
+        </restriction>
+      </simpleType>
+    </element>
+  </schema>
+</types>
+<message name="activateAAMRule">
+  <part name="parameter" element="aamIRPData:activateAAMRule"/>
+</message>
+<message name="activateAAMRuleResponse">
+  <part name="parameter" element="aamIRPData:activateAAMRuleResponse"/>
+</message>
+<message name="activateAAMRuleFault">
+  <part name="parameter" element="aamIRPData:activateAAMRuleFault"/>
+</message>
+<message name="getAAMRules">
+  <part name="parameter" element="aamIRPData:getAAMRules"/>
+</message>
+<message name="getAAMRulesResponse">
+  <part name="parameter" element="aamIRPData:getAAMRulesResponse"/>
+</message>
+<message name="getAAMRulesFault">
+  <part name="parameter" element="aamIRPData:getAAMRulesFault"/>
+</message>
+<message name="deactivateAAMRule">
+  <part name="parameter" element="aamIRPData:deactivateAAMRule"/>
+</message>
+<message name="deactivateAAMRuleResponse">
+  <part name="parameter" element="aamIRPData:deactivateAAMRuleResponse"/>
+</message>
+<message name="deactivateAAMRuleFault">
+  <part name="parameter" element="aamIRPData:deactivateAAMRule"/>
+</message>
+<portType name="AAMIRPPortType">
+  <operation name="activateAAMRule">
+
+```
+
+```
+
+    <input message="aamIRPSystem:activateAAMRule"/>
+    <output message="aamIRPSystem:activateAAMRuleResponse"/>
+    <fault name="activateAAMRuleFault" message="aamIRPSystem:activateAAMRuleFault"/>
+  </operation>
+  <operation name="getAAMRules">
+    <input message="aamIRPSystem:getAAMRules"/>
+    <output message="aamIRPSystem:getAAMRulesResponse"/>
+    <fault name="getAAMRulesFault" message="aamIRPSystem:getAAMRulesFault"/>
+  </operation>
+  <operation name="deactivateAAMRule">
+    <input message="aamIRPSystem:deactivateAAMRule"/>
+    <output message="aamIRPSystem:deactivateAAMRuleResponse"/>
+    <fault name="deactivateAAMRuleFault" message="aamIRPSystem:deactivateAAMRuleFault"/>
+  </operation>
+</portType>
+<binding name="AAMIRPBinding" type="aamIRPSystem:AAMIRPPortType">
+  <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
+  <operation name="activateAAMRule">
+    <soap:operation
+      soapAction="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#activateAAMRule"
+      style="document"/>
+    <input>
+      <soap:body use="literal"/>
+    </input>
+    <output>
+      <soap:body use="literal"/>
+    </output>
+    <fault name="activateAAMRuleFault">
+      <soap:fault name="activateAAMRuleFault" use="literal"/>
+    </fault>
+  </operation>
+  <operation name="getAAMRules">
+    <soap:operation
+      soapAction="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#getAAMRules" style="document"/>
+    <input>
+      <soap:body use="literal"/>
+    </input>
+    <output>
+      <soap:body use="literal"/>
+    </output>
+    <fault name="getAAMRulesFault">
+      <soap:fault name="getAAMRulesFault" use="literal"/>
+    </fault>
+  </operation>
+  <operation name="deactivateAAMRule">
+    <soap:operation
+      soapAction="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#deactivateAAMRule"
+      style="document"/>
+    <input>
+      <soap:body use="literal"/>
+    </input>
+    <output>
+      <soap:body use="literal"/>
+    </output>
+    <fault name="deactivateAAMRuleFault">
+      <soap:fault name="deactivateAAMRuleFault" use="literal"/>
+    </fault>
+  </operation>
+</binding>
+<service name="AAMIRPService">
+  <port name="AAMIRPPort" binding="aamIRPSystem:AAMIRPBinding">
+    <soap:address location="http://www.3gpp.org/ftp/specs/archive/32_series/32.126#AAMIRP"/>
+  </port>
+  <port name="GenericIRPPort" binding="genericIRPSystem:GenericIRPBinding">
+    <soap:address
+      location="http://www.3gpp.org/ftp/specs/archive/32_series/32.316#GenericIRP"/>
+  </port>
+</service>
+</definitions>
+
+```
+
+# Annex D (informative): Change history
+
+| Change history |       |           |     |     |                                                        |        |        |
+|----------------|-------|-----------|-----|-----|--------------------------------------------------------|--------|--------|
+| Date           | TSG # | TSG Doc.  | CR  | Rev | Subject/Comment                                        | Old    | New    |
+| 2010-09        | SA#49 | SP-100505 | --  | --  | Presentation to SA for Information and Approval        | ---    | 1.0.0  |
+| 2010-10        | --    | --        | --  | --  | Publication                                            | 1.0.0  | 10.0.0 |
+| 2011-06        | SA#52 | SP-110291 | 001 | --  | Correct syntax errors in AAM IRP schema and wsdl       | 10.0.0 | 10.1.0 |
+| 09-2012        | SA#57 | -         | -   | -   | Automatic upgrade from previous Release version 10.1.0 | 10.1.0 | 11.0.0 |