| { |
| "id": "single-software-execution--cli--solidcam--task-17--windows", |
| "snapshot": "SolidCAM-2025", |
| "instruction": "Use the installed SOLIDWORKS CAM 2025 environment (powered by CAMWorks) through native API or GUI automation; do not use generic G-code generators or manual .nc editing/copying. SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\two_sided_part.step and read C:\\Users\\User\\Desktop\\tools.csv. Create two physically opposite setups. Put each setup's X/Y work zero at the part center and Z work zero on its active surface, with positive Z pointing away from the stock, so cutting depths post as negative Z. In side A's top-face setup, machine the centered 50 x 28 mm open pocket to 11 mm depth using T1 (D10 flat end mill, S7500, F520). In side B's bottom-face setup, machine the four centers (X,Y) = (+/-30,+/-20) mm: use T2 (D5 drill, S5000, F180) for the 8 mm-deep pilot holes and T3 (D8 flat end mill, S8500, F420) for the D11 x 4 mm counterbores. Natively post the two setups separately. The posted NC must preserve the specified tool numbers, spindle speeds, feeds, work offsets, tool-length compensation, depths, pocket/counterbore coverage, and safe approach/retract moves; side A must contain only T1, while side B must contain exactly T2 and T3. Save the A and B outputs exactly as C:\\Users\\User\\Desktop\\task-17_A.nc and C:\\Users\\User\\Desktop\\task-17_B.nc.", |
| "source": "https://camworks.com/camworks-is-powering-solidworks-cam/", |
| "config": [ |
| { |
| "type": "upload_file", |
| "parameters": { |
| "files": [ |
| { |
| "local_path": "task-17/init_file/two_sided_part.step", |
| "path": "C:\\Users\\User\\Desktop\\two_sided_part.step" |
| }, |
| { |
| "local_path": "task-17/init_file/tools.csv", |
| "path": "C:\\Users\\User\\Desktop\\tools.csv" |
| } |
| ] |
| } |
| } |
| ], |
| "trajectory": "trajectories/", |
| "related_apps": [ |
| "solidcam" |
| ], |
| "artifact_paths": [ |
| "C:\\Users\\User\\Desktop\\task-17_A.nc", |
| "C:\\Users\\User\\Desktop\\task-17_B.nc" |
| ], |
| "evaluator": { |
| "postconfig": [ |
| { |
| "type": "upload_file", |
| "parameters": { |
| "files": [ |
| { |
| "local_path": "task-17/eval.py", |
| "path": "C:\\Users\\User\\Desktop\\eval.py" |
| } |
| ] |
| } |
| } |
| ], |
| "func": "exact_match", |
| "result": { |
| "type": "vm_command_line", |
| "command": "python C:\\Users\\User\\Desktop\\eval.py", |
| "shell": "true" |
| }, |
| "expected": { |
| "type": "rule", |
| "rules": { |
| "expected": "True\n" |
| } |
| } |
| }, |
| "proxy": false, |
| "fixed_ip": false, |
| "possibility_of_env_change": "low" |
| } |
|
|
