hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.1 Definition | The VAD/DTX transmitter functions consist of a Voice Activity Detector (VAD) that inhibits the transmitter during speech pauses, and a surrounding Discontinuous Transmission (DTX) system introducing Silence Descriptor (SID) frames on the air interface. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.2 Conformance requirement | The MS VAD and DTX function allow only those frames to be transmitted that are either properly positioned SID‑frames, SACCH-frames or frames marked with SP-flag = 1.
For the transmitted frames, the output bit stream from the speech transcoder shall be bit by bit exactly the same as the predefined sequences contained in... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.3 Test purpose | To verify that the combination of VAD and DTX operates correctly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.4.1 Initial conditions | Uplink DTX is on.
The DAI of the MS is connected to the SS and is set to the operating mode "Test of speech encoder/DTX functions (uplink)".
Frequency Hopping is on. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.4.2 Procedure | a) The SS sends a reset pulse to the MS on the digital audio interface. This reset pulse will start the clock output of the MS at 104 kHz (pin 24 of the DAI).
b) The SS synchronizes the input of the test sequences via the digital audio interface to the framing of the MS in the uplink. This can be done in two steps as f... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.9.5 Test requirements | 1) The bit stream recorded in step e) shall be continuous and bit by bit exactly the same as the sequence of SP-flags contained in the files DTX*.COD (see file format description in 3GPP TS 06.07 subclause 5 for the position of the SP-flag), except for the bits marking those frames that are SID frames scheduled for tra... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10 Half Rate Speech channel transmission delay | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.1 Definition | The total transmission delay within the various elements of a GSM system are specified as round trip delays. For the MS this would be equivalent to applying an RF equivalent of a speech signal to the MS receiver, closing an acoustic path from the ERP to the MRP, detecting the corresponding RF signal at the MS transmitt... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.2 Conformance requirement | The overall speech channel transmission delay shall be less than 143,9 ms.
3GPP TS 03.50 subclause 3.3.6.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.3 Test purpose | To verify that the round trip delay of a speech channel for a MS which consists of the sum of:
- the downlink delay from RF input to DAI output;
- DAI output to ERP;
- MRP to DAI output; and
- DAI to uplink RF output;
meets the requirements when using the predefined test sequences SEQ01.INP and SEQ01.DEC. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.4 Downlink processing delay | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.4.1 Definition | The downlink processing delay is the delay from the first bit of a speech block transmitted from the RF output of the SS up to the last bit of the corresponding speech block received at the DAI on the output of the speech transcoder. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.4.2 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.4.2.1 Initial conditions | The DAI of the MS is connected to the SS and is set to the operating mode "Test of speech decoder/DTX functions (downlink)". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.4.2.2 Procedure | a) The test set up is that described in subclause 32.6.4.2 for downlink speech transcoding.
b) The SS transmits the test pattern SEQ01.DEC described in 3GPP TS 06.07 subclause 6 to the MS.
c) The SS measures for each speech block it transmits the time between the first bit at the air interface and the last bit of that ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.5 Downlink coding delay | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.5.1 Definition | The downlink coding delay is defined as the delay between the digital representation of an acoustic signal on the DAI and the corresponding acoustic signal at the ERP. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.5.2 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.5.2.1 Initial conditions | The DAI of the MS is connected to the SS and is set to the operating mode "Test of acoustic devices and A/D & D/A".
The handset is mounted in the LRGP (see annex 1 of ITU-T recommendation P.76) and the earpiece is sealed to the knife edge of the artificial ear conforming to ITU-T recommendation P.51. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.5.2.2 Procedure | a) The SS generates on the DAI a digital representation of a sine wave with a frequency of 1 000 Hz.
b) The SS measures the "phase shift" 1, in the range of 0 to 360 degrees, between the equivalent sine wave generated at the DAI and the sine wave at the input to the artificial ear.
c) The frequency is increased to 1 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.6 Uplink processing delay | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.6.1 Definition | The uplink processing delay is the delay from the first bit of a speech block on the DAI to the last bit of that speech block being transmitted on the air interface of the MS.
32.10.6.2 Method of test |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.6.2.1 Initial conditions | The DAI of the MS is connected to the SS and is set to the operating mode "Test of speech encoder/DTX functions (uplink)". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.6.2.2 Procedure | a) The test set up is that described in subclause 32.8.4.2 for uplink speech transcoding.
b) The SS sends one of the test patterns SEQ01.INP described in 3GPP TS 06.07 subclause 6 to the DAI of the MS.
c) The SS measures the time between the first bit on the DAI, and the last transmitted bit of the block at the air int... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.7 Uplink coding delay | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.7.1 Definition | The uplink coding delay is defined as the delay between an acoustic signal at the MRP and the digital representation of that signal on the DAI. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.7.2 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.7.2.1 Initial conditions | The handset is mounted in the LRGP (see annex 1 of ITU-T recommendation P.76) and the earpiece is sealed to the knife edge of the artificial ear conforming to ITU-T recommendation P.51. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.7.2.2 Procedure | a) The SS generates an acoustic signal at the artificial mouth of the LRGP, being a pure sine wave with a frequency of 1 000 Hz.
b) The SS measures the "phase shift" 1, in the range of 0 to 360 degrees, between the signal at the MRP and its digital representation on the DAI.
c) The SS sets the generated frequency to 1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.10.8 Test requirement | The sum of the delays TDP, TDC, TUP, and TUC shall be less than 144,9 ms.
NOTE: This limit includes an allowance of 4*0,25 ms delay from the DAI to the MS transmission path. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11 Intra cell channel change from a TCH/HS to a TCH/FS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.1 Definition | Dual rate MSs support an intra cell channel change from a TCH/HS to a TCH/FS by switching the Speech and channel codec used from HR to FR. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.2 Conformance requirement: | 1) When commanded to perform an intra cell channel change from a TCH/HS to a TCH/FS, the MS shall switch channels from HR to FR. The maximum time allowed for the MS to perform this switch in rates is 20 ms.
3GPP TS 05.10, subclause 6.8.
2) For an intra cell channel change, the time between the end of the last complete ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.3 Test purpose: | 1) To verify that the MS encodes speech correctly after performing an intra cell channel change from a TCH/HS to a TCH/FS.
2) To verify that the MS, when commanded to perform an intracell channel change to a new ARFCN and/or timeslot number within the same cell, if the starting time is not used in the ASSIGNMENT COMMAN... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.4.1 Initial conditions | Uplink DTX is off.
The SS sets up a call according to the generic call set up procedure on a HR channel in the low ARFCN range on timeslot 1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.4.2 Procedure | a) The SS records the sequence of BFI flags obtained by channel decoding the incoming bit stream from the uplink air interface using the HR channel decoder on the old channel and at the same time records the sequence of BFI flags obtained by channel decoding the incoming bit stream from the uplink air interface using t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.11.5 Test requirement | 1) The last transition of the BFI flag at the output of the FR channel decoder from 1 to 0 shall be followed by a sequence of at least 50 zeroes, interrupted by at maximum two transitions to 1, each interruption containing exactly one BFI=1 flag, caused by the SABM or the ASSIGNMENT COMPLETE frames.
2) The calculated t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12 Intra cell channel change from a TCH/FS to a TCH/HS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.1 Definition | Dual rate MSs support an intra cell channel change from a TCH/FS to a TCH/HS by switching the Speech and channel codec used from FR to HR. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.2 Conformance requirement: | 1) When commanded to perform an intra cell channel change from a TCH/FS to a TCH/HS, the MS shall switch channels from FR to HR.
3GPP TS 05.10 subclause 6.8.
2) For an intra cell channel change, the time between the end of the last complete speech or data frame or message block sent on the old channel and the time the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.3 Test purpose: | 1) To verify that the MS encodes speech correctly after performing an intra cell channel change from a TCH/FS to a TCH/HS.
2) To verify that the MS, when commanded to perform an intra cell channel change to a new ARFCN and/or new timeslot number within the same cell, if the starting time is not used in the ASSIGNMENT C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.4.1 Initial conditions | Uplink DTX is off.
The SS sets up a call according to the generic call set up procedure on a FR channel in the low ARFCN range on timeslot 1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.4.2 Procedure | a) The SS records the sequence of BFI flags obtained by channel decoding the incoming bit stream from the uplink air interface using the FR channel decoder on the old channel and at the same time the sequence of BFI flags obtained by channel decoding the incoming bit stream from the uplink air interface using the HR ch... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 32.12.5 Test requirement | 1) The last transition of the BFI flag at the output of the HR channel decoder from 1 to 0 shall be followed by a sequence of at least 50 zeroes, interrupted by at maximum two transitions to 1, each interruption containing exactly two BFI=1 flags, caused by the SABM or the ASSIGNMENT COMPLETE frames.
2) The calculated ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33 Mobile station features | 3GPP TS 02.07 defines mandatory and optional MS features. Their presence and appropriate functioning are verified by the following tests. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1 Entry and display of called number | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.1 Definition | The entry and display of a called number is the ability of a MS to correctly display and signal to the network the user required number. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.2 Conformance requirement | 1) The number of the called subscriber is included in the Called party BCD number Information element of the SETUP message for an outgoing call.
The "Display of Called number" shall be implemented in an MS where a human interface is provided.
2) The "Numbering plan identification" is included in the Called party BCD nu... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.3 Test purpose | 1) To verify that an MS with human interface, in a SETUP message sent to originate a call, includes the same "Number digits" in the "Called party BCD number" of the SETUP message as displayed.
2) To verify that an MS with MMI, when made to establish a call sends a SETUP message, which includes the "Numbering plan ident... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.4.1 Initial conditions | The MS is registered in a cell of the SS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.4.2 Procedure | a) A number (not including "+ function") is entered and then a call is set up.
b) After the SS has accepted the call the number displayed on the MS and the number received in the SS are compared.
c) The NPI and TON are examined in the SS.
d) Steps a) to c) are repeated, but in a), the number entered starts with the "+ ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.1.5 Test requirements | 1) In step b), both numbers shall be identical.
2) In step c), the NPI shall be "E164" and the TON shall be "unknown".
3) In step d), the NPI shall be "E164" and the TON shall be "international". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2 Indication of call progress signals | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.1 Definition | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.2 Conformance requirement | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.3 Test purpose | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.4 Ringing tone | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.4.1 Method of test | a) According to subclause "Structured procedures, Mobile originating call, early assignment, Method of test", paragraphs a) to j). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.4.2 Requirements | 1) According to subclause "Structured procedures, Mobile originating call, early assignment, Requirements", paragraphs 1) to 7).
2) The ringing tone characteristics shall be as follows:
Tone
Frequency
Tolerance
Type
Ringing tone
425 Hz
15 Hz
Periodic
tone on 1 s,
silence 4 s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.5 Busy tone | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.5.1 Method of test | a) According to subclause "Structured procedures, Mobile originating call, early assignment, Method of test", paragraphs a) to h).
b) The SS then sends message DISCONNECT with cause number 17.
Message: DISCONNECT (3GPP TS 04.08 / 3GPP TS 24.008, subclause 9.3.7) to the MS:
Information element
Comment
Protocol discrimin... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.5.2 Requirements | 1) According to subclause "Structured procedures, Mobile originating call, early assignment, Requirements", paragraphs 1) to 5).
2) After the reception of DISCONNECT a busy tone shall be generated. The busy tone characteristics shall be as follows:
Tone
Frequency
Tolerance
Type
Busy tone
425 Hz
15 Hz
Periodic
tone on 5... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.6 Congestion tone | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.6.1 Method of test | a) According to subclause "Structured procedures, Mobile originating call, early assignment, Method of test", paragraphs a) to h).
b) The SS then sends message DISCONNECT with cause number 42.
DISCONNECT message: As in subclause 33.2.3.1 with cause value #42 "Switching equipment congestion" (0101010). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.6.2 Requirements | 1) According to subclause "Structured procedures, Mobile originating call, early assignment, Requirements", paragraphs 1) to 5).
2) After the reception of DISCONNECT a congestion tone shall be generated.
3) The congestion tone characteristics shall be as follows:
Tone
Frequency
Tolerance
Type
Congestion tone
425 Hz
15 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.7 Authentication failure tone | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.7.1 Method of test | a) According to subclause "Structured procedures, Mobile originating call, early assignment, Method of test", paragraphs a) to e).
b) After reception of message AUTHENTICATION RESPONSE the SS sends message AUTHENTICATION REJECT.
Message: AUTHENTICATION REJECT (3GPP TS 04.08 / 3GPP TS 24.008, 9.2.1) to the MS:
Informati... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.7.2 Requirements | 1) According to subclause "Structured procedures, Mobile originating call, early assignment, Requirements", paragraphs 1) to 4).
2) After reception of AUTHENTICATION REJECT a tone shall be generated indicating authentication failure.
3) The authentication failure tone is the error/special information tone with characte... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.8 Number unobtainable tone | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.8.1 Method of test | a) According to subclause "Structured procedures, Mobile originating call, early assignment, Method of test", paragraphs a) to h).
b) The SS then sends message DISCONNECT with cause number 1.
DISCONNECT message: As in subclause 33.2.3.1 with cause value #1 "Unassigned (unallocated) number" (0000001). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.8.2 Requirements | 1) According to subclause "Structured procedures, Mobile originating call, early assignment, Requirements", paragraphs 1) to 5).
2) After reception of DISCONNECT a tone shall be generated indicating that the called number is unobtainable.
The number unobtainable tone is the error/special information tone with character... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.9 Call dropped tone | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.9.1 Method of test | a) According to subclause "Structured procedures, Mobile originating call, early assignment, Method of test", paragraphs a) to l). However, it shall be indicated in the system information messages that call re-establishment shall not be attempted (RACH control parameters).
b) When the call has been established the SS s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.2.9.2 Requirements | 1) According to subclause "Structured procedures, Mobile originating call, early assignment, Requirements", paragraphs 1) to 8).
2) After the radio link time-out period has expired a tone shall be generated indicating that the call has been dropped.
The call dropped tone characteristics shall be as follows:
Tone
Freque... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3 Network selection / indication | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.1 Definition | Network selection and indication is the ability of the MS to correctly select a network and display to the user in accordance with 3GPP TS 02.11 and 3GPP TS 03.22.
Tests concerning the MS behaviour after having received a location updating reject message with specific causes are included in subclause 26.7.4.2.
Tests co... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.2 Conformance requirement | 1) Upon switching on, when an IMSI is available and there is no registered PLMN on the SIM, the MS shall select its Home PLMN and perform the cell selection procedure.
2) If the MS loses radio coverage for its registered PLMN, and the MS is in automatic PLMN selection mode, it shall attempt to select its Home PLMN.
3) ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.3 Test purpose | 1) To verify that the MS with SIM containing in the PLMN selector field at least one PLMN different from the Home PLMN and containing no registered PLMN, when in automatic PLMN selection mode, selects its Home PLMN, if available, upon switching on and when the IMSI is available. (This is verified by observation of the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.4 Method of Test | Procedure 1: This procedure applies to both automatic and manual mode for PLMN selection. This procedure is run for each of the following cases:
case A) Timer T is set to 6 min in the SIM.
case B) No HPLMN search timer value is available on the SIM.
case C) Timer T is set to "no periodic attempt to obtain service on th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.4.1 Procedure 1 | 1.1) The MS is set up with a SIM which contains, in the "PLMN selector" data field, a list of 3 PLMN in the priority order PLMN2 (highest priority), PLMN3, PLMN4 (lowest priority). PLMN1 is the Home PLMN of the MS as defined in the IMSI. The "Forbidden PLMN" data field shall contain NULL values. "registered PLMN" data ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.4.2 Requirements 1 | Requirement 1.1) is mandatory for all MS. Requirements 1.2) only apply to MS capable of indicating PLMN.
1.1) The MS shall make a response as indicated in steps 1.4, 1.7, 1.10, 1.13A, 1.13B, 1.14A, 1.14B, 1.15C, 1.18, 1.23 above. In cases 1.4, 1.7, 1.10, 1.15C, 1.18 and 1.23, the MS shall respond within 30 s.
1.2) The ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.4.3 Procedure 2 | 2a) The MS is set up with a SIM which contains NULL values in the "PLMN selector" data field. PLMN1 is the Home PLMN of the MS as defined in the IMSI. The "forbidden PLMN" data field shall contain PLMN3. the "registered PLMN" field is set to PLMN2.
2b) The SS transmits 4 BCCH carriers with the following parameters:
PLM... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.3.4.4 Requirements 2 | 2.1) The MS shall make a response as indicated in step 2d). The MS shall respond within 30 s.
Table 33-1: Normal system information fields
Parameter
Reference in 3GPP TS 04.08 / 3GPP TS 24.008 / 3GPP TS 44.018
Abbreviation
Normal setting
Cell Channel Description
10.5.2.1
-
Any values
Max retrans
10.5.2.17
-
1
Tx-intege... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4 Invalid and blocked PIN indicators | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.1 Definition | - |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.2 Conformance requirement | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.3 Test purpose | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.4.1 Initial conditions | The MS contains a SIM with the PIN enabled, and the SIM unblocking counter set to zero by previous presentation of the personal unblocking key. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.4.2 Procedure | a) The MS is switched on.
b) Three wrong PIN are entered.
Activation may be either manual or via the EMMI. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.4.5 Test requirements | For the first and second incorrect PIN the MS shall indicate that the PIN code has been rejected.
For the third incorrect PIN the MS shall indicate that the PIN is blocked. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.5 Service indicator | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.5.1 Definition | - |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.5.2 Conformance requirement | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.5.3 Test purpose | Void. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 33.5.4 Method of test |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.