hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.3.2 Conformance requirement | The SMS offers the SC the capabilities of informing the MS of the status of a previously sent mobile originated short message. This is achieved by the SC returning a status report TPDU (SMS-STATUS-REPORT) to the originating MS.
SMS-COMMAND enables an MS to invoke an operation at the SC.
The MS shall increment TP-MR by ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.3.3 Test purpose | 1) To verify that the MS is able to accept a SMS-STATUS-REPORT TPDU.
2) To verify that the MS is able to use the SMS-COMMAND functionality correctly and sends an SMS-COMMAND TPDU with the correct TP-Message-Reference. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.3.4 Method of test | Initial conditions
- System Simulator:
- 1 cell, default parameters.
- Mobile Station:
- the MS shall be in GMM-state "GMM-REGISTERED".
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
a) The MS is made to send a Mobile Originated short message.
b) The SS sends a CP-DATA message containing a RP-DATA RPDU it... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.4 Test of capabilities of simultaneously receiving a short message whilst sending a mobile originated short message | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.4.1 Definition | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.4.2 Conformance requirements | An active MS shall be able to receive a short message TPDU (SMS-DELIVER) at any time, independently of whether or not there is an SMS mobile originated call (SMS-SUBMIT or SMS-COMMAND) in progress.
Reference(s):
3GPP TS 03.40 / 3GPP TS 23.040 clause 3.1, 9.2.3.16.
3GPP TS 04.11 / 3GPP TS 24.011 clause 3.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.4.3 Test purpose | The test verifies that the MS is capable of simultaneously receiving a network originated SM whilst sending a mobile originated SM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.4.4 Method of test | Initial Conditions
System Simulator:
- 1 cell, default parameters.
Mobile Station:
- the MS shall be in GMM-state "GMM-REGISTERED";
- the SMS message storage shall be empty.
Specific PICS Statements
-
PIXIT Statements
Test procedure
The MS is triggered to send an SM to the SS. Upon the reception of the CP-DATA, the SS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.5 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.6 Concatenated MO SMS over GPRS | Concatenation allows short messages to be concatenated to form a longer message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.6.1 Conformance requirement | This facility allows short messages to be concatenated to form a longer message.
The Information‑Element‑Data field contains information set by the application in the SMS‑SUBMIT so that the receiving entity is able to re‑assemble the short messages in the correct order. Each concatenated short message contains a refere... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.6.2 Test purpose | To verify that MS is able to send longer messages (user data exceeding 140 octets) using concatenation feature. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.6.3 Method of test | Initial conditions
System Simulator:
1 cell, default parameters
Mobile Station:
The MS shall be in GMM-state "GMM-REGISTERED"
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
a) The MS is made to send a short message with user data exceeding 140 octets
b) Repeat steps c) to e) for n=1..N; N is the total num... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.7 Concatenated MT SMS over GPRS | Concatenation allows short messages to be concatenated to form a longer message |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.7.1 Conformance requirement | This facility allows short messages to be concatenated to form a longer message.
The Information‑Element‑Data field contains information set by the application in the SMS‑DELIVER so that the receiving entity is able to re‑assemble the short messages in the correct order. Each concatenated short message contains a refer... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.7.2 Test purpose | To verify that MS is able to combine concatenated message segments to form a long message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.7.3 Method of test | Initial conditions
System Simulator:
1 cell, default parameters
Mobile Station:
The MS shall be in GMM-state "GMM-REGISTERED"
The SMS message storage shall be empty.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
a) Repeat steps b) to d) for n= 1..N; N is the total number of segments in SM
b) The SS send... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8 Short Messaging Service – Handling of unknown, unforeseen, and erroneous protocol data | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.1 CP Error Handling | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.1.1 Conformance requirements | a) The Mobile Station shall ignore a CP message (CP‑DATA, CP‑ACK, CP‑ERROR) received with TI value "111".
b) Whenever a CP‑ACK message is received specifying a Transaction Identifier which is not associated with an active SM transfer, the mobile station shall discard the message and return a CP‑ERROR message with cause... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.1.2 Test purpose | a) To Verify that MS ignores CP-DATA message with TI value "111".
b) To verify that MS ignores CP-ACK message with TI value not associated with active SMS transfer and sends CP-ERROR with cause # 81
c) To verify that MS ignores CP-ERROR with TI value not associated with active SMS transfer
d) To verify MS response when... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.1.3 Method of test | Initial Conditions
System simulator:
1 cell, default parameters
Mobile Station:
The MS shall be in GMM-state "GMM-REGISTERED"
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
a) The SS sends CP-DATA with TI value ‘111’B. Check for no response from MS for 60 s.
b) The MS shall be set up to send a short messa... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.2 RP Error Handling | 34.4.8.2.1 Conformance Requirement
a) Whenever any RP‑ACK message is received specifying a Message Reference which is not associated with an active SM transfer, the mobile station shall discard the message and return an RP‑ERROR message with cause #81, "Invalid short message transfer reference value" using the received... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.2.2 Test Purpose | a) To verify that MS ignores RP-ACK with message reference which is not associated with active SM transfer and sends RP-ERROR with cause #81, “Invalid short message transfer reference value"
b) To verify that MS ignores RP-ERROR with message reference which is not associated with active SM transfer
c) To verify that MS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.4.8.2.3 Method of test | Initial Conditions
System simulator:
1 cell, default parameters
Mobile Station:
The MS shall be in GMM-state "GMM-REGISTERED"
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
a) The MS shall be set up to send a short message to the SS. MS sends CP-DATA containing RP-DATA (SMS SUMBIT PDU). SS sends CP-ACK an... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 34.5 Default message contents | CP-DATA (including RP-DATA SS->MS)
Protocol Discriminator
SMS messages ("1001"B)
Transaction Identifier
TI value
any value from the set {0, ...., 6}
TI flag
0
Message type
00000001
CP-User data
length indicator
RP-DATA
max 248 octets
RP-Message Type
001 (RP-DATA SS->MS)
RP-Message Reference
see 3GPP TS 04.11 subclause ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35 Low battery voltage detection | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.1 Definition | Low battery or shutdown voltage detection is used to trigger inhibition of all RF transmission before the MS supply voltage reaches a level where effective use of the radio frequency spectrum is no longer guaranteed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.2 Conformance requirement | 1. The MS shall not make ineffective use of the radio frequency spectrum. In no case shall the MS exceed the transmitted levels as defined in 3GPP TS 05.05 for extreme operation.
3GPP TS 05.05, subclause D.2.2.
2. The MS shall inhibit all RF transmission when the power supply voltage is below the manufacturer declared ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.3 Test purpose | 1. To verify that the MS does not make ineffective use of the RF spectrum.
2. To verify that the MS inhibits all RF transmission when the battery voltage falls below the manufacturer declared shutdown level. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.4.1 Initial conditions | The SS transmits a BCCH with a location updating time set to 0,1 hours.
The SS sends a paging request message to the MS.
The MS responds with a channel request message.
The SS sends an immediate assignment message establishing an SDCCH. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.4.2 Procedure | a) The SS gradually reduces the power supply voltage until the MS ceases the production of RF output.
The RF output spectrum shall be monitored for any anomalies while the supply voltage is being reduced.
NOTE 1: The declared approximate shutdown voltage gives an indication of the voltage where the MS will cease RF out... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 35.5 Test requirement | 1. In step a) no anomalies shall occur.
2. In step a), the MS shall cease the production of RF output.
3. In steps d), f) and i), the MS shall not produce any RF output above -30 dBm. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 36 Individual equipment type requirements and interworking - special conformance testing functions | Refer to 3GPP TS 04.14 for complete specification
37 to 39 Void
Void
40 GPRS default conditions, message contents and macros
Editor's note: From Rel-9 the PBCCH and PCCCH are removed from chapter 40.x but temporary test cases may still exist in 51.010 referencing to the macros using PBCCH and PCCCH. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1 Default test conditions | The following default test conditions shall apply if not otherwise stated within an individual test description.
The testcases for higher layers shall use the second set of default test conditions for channel combination v), xi) and xiii) as specified in subclause 40.3.
In the tables following, decimal values will norm... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1.1 Default settings for cell A | GSM 900
DCS 1 800
General signalling conditions for all carriers
Ciphering
Yes
Yes
General RF-conditions for all carriers
Frequency hopping mode
Non-hopping
Non-hopping
Propagation profile
Static
Static
Downlink Input Level
63 dBµVemf( )
63 dBµVemf( )
Uplink output power
Minimum according to MS power class
Minimum ac... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1.2 Default settings for cell B | The default settings for cell B are identical to those of cell A with the following exceptions:
GSM 900
DCS 1 800
Downlink Input Level
53 dBµVemf()
53 dBµVemf()
Serving cell, BCCH/CCCH carrier
Channel ARFCN
5
515
Serving cell, PDTCH (PBCCH not present), SDCCH, TCH
Channel ARFCN
60
750
Cell identity
0002H
0002H
Neighbou... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1.3 Default settings for cell C | The default settings for cell C are identical to those of cell A with the following exceptions:
GSM 900
DCS 1 800
Downlink Input Level
53 dBµVemf()
53 dBµVemf()
Serving cell, BCCH/CCCH carrier
Channel ARFCN
80
600
Serving cell, PDTCH (PBCCH not present), SDCCH, TCH
Channel ARFCN
25
675
Cell identity
0003H
0003H
Neighbo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1.4 Default settings for cell D | The default settings for cell D are identical to those of cell A with the following exceptions:
GSM 900
DCS 1 800
Downlink Input Level
53 dBµVemf()
53 dBµVemf()
Serving cell, BCCH/CCCH carrier
Channel ARFCN
110
700
Serving cell, PDTCH (PBCCH not present), SDCCH, TCH
Channel ARFCN
35
725
Cell identity
0004H
0004H
Neighb... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1.5 Default settings for cell E | The default settings for cell E are identical to those of cell A with the following exceptions:
GSM 900
DCS 1 800
Downlink Input Level
53 dBµVemf()
53 dBµVemf()
Serving cell, BCCH/CCCH carrier
Channel ARFCN
90
780
Serving cell, PDTCH (PBCCH not present), SDCCH, TCH
Channel ARFCN
45
735
Cell identity
0005H
0005H
Neighbo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.1.6 Default settings for cell F | The default settings for cell F are identical to those of cell A with the following exceptions:
GSM 900
DCS 1 800
Downlink Input Level
53 dBµVemf()
53 dBµVemf()
Serving cell, BCCH/CCCH carrier
Channel ARFCN
120
810
Serving cell, PDTCH (PBCCH not present), SDCCH, TCH
Channel ARFCN
55
775
Cell identity
0006H
0006H
Neighb... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2 Default message contents | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1 System Information messages | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1.1 Cell A | With the SYSTEM INFORMATION messages, the information elements are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
NOTE: BCCH can send 1 instance of SYSTEM INFORMATION 13.
40.2.1.1.1 Contents of information elements in SYSTEM INFORMATION TYPE 1 to 13 me... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 110110110 ARFCN 438 | - BAND_OFFSET
000000000
- ARFCN_RANGE
1001010 74 channels |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1.2 Cell B | The contents of SYSTEM INFORMATION TYPE 1 to 13 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
For GSM 900:
Bit map 0.
For DCS 1800 and PCS 1900:
Range 512.
For GSM 700, T-GSM 810 and GSM 850:
Range 128.
- Cell Allocation ARFCN
For GSM 90... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1.3 Cell C | The contents of SYSTEM INFORMATION TYPE 1 to 13 messages for cell C are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
For GSM 900:
Bit map 0.
For DCS 1800 and PCS 1900:
Range 512.
For GSM 700, T-GSM 810 and GSM 850:
Range 128.
- Cell Allocation ARFCN
For GSM 90... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1.4 Cell D | The contents of SYSTEM INFORMATION TYPE 1 to 13 messages for cell D are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
For GSM 900:
Bit map 0.
For DCS 1800 and PCS 1900:
Range 512.
For GSM 700, T-GSM 810 and GSM 850:
Range 128.
- Cell Allocation ARFCN
For GSM 90... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1.5 Cell E | The contents of SYSTEM INFORMATION TYPE 1 to 13 messages for cell E are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
For GSM 900:
Bit map 0.
For DCS 1800 and PCS 1900:
Range 512.
For GSM 700, T-GSM 810 and GSM 850:
Range 128.
- Cell Allocation ARFCN
For GSM 90... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.1.6 Cell F | The contents of SYSTEM INFORMATION TYPE 1 to 13 messages for cell F are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
For GSM 900:
Bit map 0.
For DCS 1800 and PCS 1900:
Range 512.
For GSM 700, T-GSM 810 and GSM 850:
Range 128.
- Cell Allocation ARFCN
For GSM 90... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.2 Packet System Information messages on PACCH | 40.2.2.1 PACKET SYSTEM INFORMATION TYPE 13 (only applicable in test cases where PBCCH is not present).
This message is transmitted PACCH in such a way that the Mobile station receives PSI13 once in 15 seconds.
MESSAGE_TYPE
110111
PAGE_MODE
00 Normal Paging
BCCH_CHANGE_MARK
000
SI_CHANGE_FIELD
0000 Unspecified... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3 Default contents of Layer 2 messages | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.1 PACKET PAGING REQUEST message: | MESSAGE_TYPE
100010
PAGE_MODE
00 Normal Paging
{0|1<PERSISTENCE_LEVEL>}
0 (no persistence level present)
{0|1<NLN>}
0 (no notification list number)
{1|<Repeated Page info>}
1 (start of Repeated Page info)
-
0 (Page request for TBF establishment)
-
0 (PTMSI)
- PTMSI
00000000000000000000000000000000
P-TMSI allocated du... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.2 PACKET ACCESS REJECT message: | MESSAGE_TYPE
100001
PAGE_MODE
00 Normal Paging
Reject
-
1 (TLLI not present)
-
0(Packet Request Reference)
- Packet Request Reference
information field sent in PACKET CHANNEL REQUEST and frame number in which PACKET CHANNEL REQUEST was received
-
0 (no waiting indication)
-
0 (end of Reject IE)
spare padding
Spare ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.3 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.4 PACKET UPLINK ASSIGNMENT messages | MESSAGE_TYPE
001010
PAGE_MODE
00 Normal Paging
{0|1< PERSISTENCE_LEVEL >
0 (no persistence level present)
Referenced Address struct
As received from the MS
{ 0 < Global TFI >
| 10 < TLLI >
| 110 < TQI >
| 111 <Packet Request Reference >}
--Message escape
0
CHANNEL_CODING_COMMAND
CS1
TLLI_BLOCK_CHANNEL_CODING
1
Packet... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.5 PACKET DOWNLINK ASSIGNMENT message: | MESSAGE_TYPE
000010
PAGE_MODE
00 Normal Paging
{0|1< PERSISTENCE_LEVEL >
0 (no persistence level present)
Referenced Address
-
1 (address is TLLI)
- TLLI
Same as the value received from MS
MAC_MODE
00 Dynamic Allocation
RLC_MODE
0 Acknowledged mode
CONTROL_ACK
0
TIMESLOT_ALLOCATION
arbitrarily chosen (default tim... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.6 PACKET DOWNLINK DUMMY CONTROL BLOCK message: | MESSAGE_TYPE
100101
PAGE_MODE
00 Normal Paging
Persistence Level
1 Persistence Level Present
- PERSISTENCE_LEVEL
0000 Radio Priority 1
- PERSISTENCE_LEVEL
0000 Radio Priority 2
- PERSISTENCE_LEVEL
0000 Radio Priority 3
- PERSISTENCE_LEVEL
0000 Radio Priority 4
Spare padding
Spare Padding |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.3.7 Packet Timeslot Reconfigure | PACKET TIMESLOT RECONFIGURE message (dynamic allocation without assigning a new TBF):
MESSAGE_TYPE
000111
PAGE_MODE
Normal Paging
0<GLOBAL_TFI>
0
The TFI value of the uplink TBF or downlink TBF which this message applies to (default 00101)
0, message escape
CHANNEL_CODING_COMMAND
arbitrarily chosen from valid values (d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4 Default contents of Layer 3 messages | This clause contains the default values of L3 messages, which unless indicated otherwise in clause 40, shall be transmitted by the system simulator and which are required to be received from the MS under test.
In this clause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "Hex... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.1 ACTIVATE PDP CONTEXT ACCEPT message: | Protocol discriminator
1010 (SM message for GPRS service)
Activate PDP context accept message identity
01000010
Negotiated LLC SAPI
As per corresponding Activate PDP Context Request
Negotiated QoS
Minimum
Radio priority
Arbitrary chosen
Spare half octet
Spare half octet
PDP address
Returned only if PDP address from cor... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.2 ACTIVATE PDP CONTEXT REJECT message: | Protocol discriminator
1010 (SM message for GPRS service)
Activate PDP context reject message identity
01000011
SM cause
Insufficient resources |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.3 ATTACH ACCEPT message: | Protocol discriminator
1000 (MM message for GPRS service)
Skip indicator
0000
Attach accept message identity
00000010
Attach result
Copy back attach type (GPRS attach (MS class C))
Force to standby
not indicated (subject to CR)
Periodic RA update timer
timer is deactivated
Radio priority for SMS
priority level 3
Spare ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.4 ATTACH REJECT message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Attach reject message identity
00000100
GMM cause
Regular deactivation
For R99 network simulation:
T3302 value
0 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.5 AUTHENTICATION AND CIPHERING REJECT message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Authentication and ciphering reject message identity
00010100 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.6 AUTHENTICATION AND CIPHERING REQUEST message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Authentication and ciphering request message identity
00010010
Ciphering algorithm
Ciphering not used
IMEISV request
not requested
Force to standby
not indicated
A&C reference number
Arbitrary
Authentication parameter RAND
Arbitrary
GPRS ciphering key seque... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.7 CHANNEL RELEASE message: | Protocol Discriminator
0110 (RR Management).
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
GPRS RESUMPTION IE
Present (see note below)
- ACK field
1
NOTE: Only in case the MS performed GPRS suspension procedure prior to the CS session, then the GPRS RESUMPTION IE shall be present in... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.8 DEACTIVATE PDP CONTEXT ACCEPT message: | Protocol discriminator
1010 (SM message for GPRS service)
Deactivate PDP context accept message identity
01010100 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.9 DETACH ACCEPT message (for mobile terminated detach): | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Detach request message identity
00000110 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.10 DETACH REQUEST message (mobile terminated detach): | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Detach request message identity
00000101
Detach type
re-attach not required
Force to standby
not indicated |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.11 GMM INFORMATION message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
GMM information message identity
00100001 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.12 GMM STATUS message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
GMM status message identity
00100000
GMM cause
Arbitrary |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.13 IDENTITY REQUEST message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Identity request message identity
00010101
Identity type
IMSI
Force to standby
not indicated |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.14 IMMEDIATE ASSIGNMENT messages | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.14.1 IMMEDIATE ASSIGNMENT message (Packet Downlink Construction): | L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.14.2 IMMEDIATE ASSIGNMENT message (Packet Uplink construction): | L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.14.3 IMMEDIATE ASSIGNMENT message (Single block allocation construction): | L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.15 IMMEDIATE ASSIGNMENT EXTENDED message: | L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.16 IMMEDIATE ASSIGNMENT REJECT message: | L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference 1
Copy of last received by the SS.
Wait Indication 1
0 seconds.
Request Reference 2
Not pertaining to the MS under test.
Wait Indication 2
0 seconds.
Request Referen... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.17 MODIFY PDP CONTEXT REQUEST message: | Protocol discriminator
1010 (SM message for GPRS service)
Modify PDP context request message identity
01001000
Radio priority
Spare half octet
Spare half octet
Requested LLC SAPI
As per corresponding Activate PDP Context Request
New QoS
Higher than the minimum QoS |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.18 PAGING REQUEST TYPE 1 message: | L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal P... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.19 PAGING REQUEST TYPE 2 message: | L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.20 PAGING REQUEST TYPE 3 message: | L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
00 (indicating packet paging).
- second channel
00 (indicating packet paging).
Mobile identity 1
- TMSI value
P-TMSI previously allocated to MS.
Mobile... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.21 PDCH ASSIGNMENT COMMAND message (downlink): | Information Element
Value/Remarks
Protocol Discriminator
RR Management
Skip indicator
0000 (Binary)
Message Type
00101010 (Binary)
Description of the Channel, after time
- Channel Description
- Channel Type and TDMA offset
TCH/F + ACCH's
- Timeslot Number
Slot 2
- Training Sequence Code
Same as the BCC
- Hopping channe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.22 REQUEST PDP CONTEXT ACTIVATION message (mobile originated detach): | Protocol discriminator
1010 (SM message for GPRS service)
Request PDP context activation message identity
01000100
Offered PDP address
Arbitrarily chosen |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.23 ROUTING AREA UPDATE ACCEPT message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Routing area update accept message identity
00001001
Force to standby
not indicated
Update result
RA updated
Periodic RA update timer
Timer is deactivated
Routing area identification
- MCC
001 (decimal)
- MNC
For GSM 900 / DCS 1800: 01 (decimal)
For GSM 700... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.24 ROUTING AREA UPDATE REJECT message: | Protocol discriminator
MM message for GPRS
Skip indicator
0000
Routing Area Update reject message identity
00001011
GMM cause
Congestion
Force to standby
Not indicated
For R99 network simulation:
T3302 value
0 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.25 RR-CELL CHANGE ORDER message: | Information Element
Value/Remarks
Protocol Discriminator
RR Management
Skip indicator
0000 (Binary)
Message Type
00001000 (Binary)
Cell description
- PLMN colour code, NCC
1
- BS colour code, BCC
5
- BCCH ARFCN
As for “Serving cell, PDTCH (PBCCH not present),SDCCH ” in section 40.1.1 for the current cell
NC mode for ta... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.26 SM STATUS message: | Information Element
Value/Remarks
Protocol discriminator
1010 (SM message for GPRS service)
SM status message identity
01010101
SM cause
Arbitrary |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.27 DETACH ACCEPT message (for mobile orginated detach): | Information Element
Value/Remarks
Protocol discriminator
MM message for GPRS
Skip indicator
0000
Detach request message identity
00000110
Force to Standby
001 (indicated)
Spare half octet
Spare Padding |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.28 DTM Assignment Command | Protocol discriminator
0110
Skip Indicator
0000
Message Type
01001100
Power Command
00001010 FPC not in use, Power control level 10
Description of the CS Channel
- Channel Description
- Channel Type and TDMA offset
TCH/F + ACCH’s
- Timeslot Number
3
- Training Sequence Code
Same as the BCCH
- Hopping channel
Single RF... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.29 DTM Reject | Protocol discriminator
0110
Skip Indicator
0000
Message Type
01001001
Wait Indication
- T3122/T3142 timeout value
00011110 (30 Seconds) |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.30 Packet Notification | Protocol discriminator
0110
Skip Indicator
0000
Message Type
01001110
P-TMSI
- P-TMSI Value
00000000000000000000000000000000 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.31 Packet Assignment | Protocol discriminator
0110
Skip Indicator
0000
Message Type
01001011
GPRS broadcast information
- Length in Octets
00000101
- GPRS Cell Options
- NMO
00 Network Mode 1
- T3168
011 2 seconds
- T3192
010 1.5 seconds
- DRX_TIMER_MAX
000
- ACCESS_BURST_TYPE
1 11 bit access burst
- CONTROL_ACK_TYPE
1 RLC/M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.32 Assignment Command | RR management Protocol Discriminator
0110
Skip Indicator
0000
Message Type
00101110
Description of the First Channel, after time
- Channel Description
- Channel Type and TDMA offset
TCH/F + ACCH’s
- Timeslot Number
3
- Training Sequence Code
Same as the BCCH
- Hopping channel
Single RF channel
- ARFCN
default
Power Com... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.33 Handover Command | RR management Protocol Discriminator
0110
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base Station Colour Code
5
- BCCH Carrier Number
Dependant upon the test case
Description of the First Channel, after time
- Channel Description
- Channel Type and TDMA offset
TCH/F + ACCH’s
- ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.34 Physical Information | Protocol Discriminator
0110
Skip Indicator
0000
Message Type
00101101
Timing advance
30 bit periods. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.35 Connect Acknowledge | Protocol Discriminator
0011
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 40.2.4.36 Location Updating Accept | Protocol Discriminator
0101
Skip Indicator
0000
Location Updating Accept message type
00000010
Location Area Identification
MCC
001 (decimal)
MNC
01 (decimal) for GSM 900, DCS 1800
011 (decimal) for GSM 700, T-GSM 810, GSM 850, PCS 1900
LAC
0001H |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.