hash
stringlengths
32
32
doc_id
stringlengths
5
12
section
stringlengths
5
1.47k
content
stringlengths
0
6.67M
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.2.2 Test purpose
To test the behaviour of the MS if the network orders a GPRS detach procedure with the cause 'GPRS services not allowed' (no valid GPRS-subscription for the IMSI).
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.2.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (HPLMN) and cell B in MCC2/MNC1/LAC1/RAC1. Both cells are operating in network operation mode II. Mobile Station: The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A. Specific PICS statements: - ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.3 GPRS detach / IMSI detach / accepted
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.3.1 Conformance requirement
The MS detach the IMSI for GPRS services. Reference(s): 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.4.2.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.3.2 Test purpose
To test the behaviour of the MS for the detach procedure.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.3.3 Method of test
Initial conditions System Simulator: One cell operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B) - MS operation mode A (TSPC_operation_mode_A). - Switch off on button (TSPC_Feat_OnOff). - Automatic ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.4 GPRS detach / re-attach requested / accepted
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.4.1 Conformance requirement
When receiving the DETACH REQUEST message and the detach type IE indicates "re-attach required", the MS shall deactivate the PDP contexts and deactivate the logical link(s), if any. The MS shall then send a DETACH ACCEPT message to the network and shall change state to GMM-DEREGISTERED. The MS shall, after the completi...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.4.2 Test purpose
To test the behaviour of the MS for the detach procedure in case automatic re-attach.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.4.3 Method of test
Initial conditions System Simulator: One cell in operating in network operation mode I. Mobile Station: The MS has a valid TMSI(for Class B MS), P-TMSI and RAI. MS is Idle Updated. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B) - MS operation mode C (TSPC_operation_mode_C) - Switch off on butto...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.5 GPRS detach / rejected / location area not allowed
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.5.1 Conformance requirement
44.2.2.2.5.1.1 Conformance requirement for a R97 and R98 MS 1) If the network performs a GPRS detach procedure with the cause 'location area not allowed' the Mobile Station shall: 1.1 not perform combined GPRS attach when in the same location area; 1.2 delete any RAI or LAI, P-TMSI, P-TMSI signature and GPRS ciphering...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.5.1.2 Conformance requirement for a R99 or later MS
1) If the network performs a GPRS detach procedure with the cause 'location area not allowed' the Mobile Station shall: 1.1 not perform combined GPRS attach when in the same location area; 1.2 delete any RAI, P-TMSI, P-TMSI signature and GPRS ciphering key sequence number; 1.3 store the LAI in the list of 'forbidden lo...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.5.2 Test purpose
To test the behaviour of the MS if the network orders the GPRS detach procedure with the cause 'Location Area not allowed'. To test that the MS deletes the list of forbidden LAs when power is switched off.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.5.3 Method of test
Initial conditions System Simulator: Three cells (not simultaneously activated), cell A in MCC2/MNC1/LAC1/RAC1 (Not HPLMN), cell B in MCC2/MNC1/LAC1/RAC2 (Not HPLMN), cell C in MCC2/MNC1/LAC2/RAC1 (Not HPLMN). All cells are operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updat...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.6 GPRS detach / rejected / GPRS services not allowed in this PLMN
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.6.1 Conformance requirement
If the network performs a GPRS detach procedure with the cause 'GPRS services not allowed in this PLMN' the Mobile Station shall: 1. The MS shall delete any RAI, P-TMSI, P-TMSI signature, and GPRS ciphering key sequence number stored, shall set the GPRS update status to GU3 ROAMING NOT ALLOWED (and shall store it accor...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.6.2 Test purpose
To test the behaviour of the MS if the network orders the GPRS detach procedure with the cause ' GPRS services not allowed in this PLMN.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.2.2.6.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC2/LAC1/RAC1, cell B in MCC2/MNC1/LAC1/RAC1. All two cells are operating in network operation mode II. The PLMN of the two cells should NOT be that of the Mobile Station Home PLMN. Mobile Station: The MS has a valid TMSI-1, ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3 Routing area updating procedure
This procedure is used to update the actual routing area of an MS in the network.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1 Normal routing area updating
The routing area updating procedure is a GMM procedure used by GPRS MSs of MS operation mode B or C that are IMSI attached for GPRS services only.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.1 Routing area updating / accepted
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.1.1 Conformance requirement
1) If the network accepts the routing area updating procedure and reallocates a P-TMSI, the MS shall acknowledge the new P-TMSI and continue communication with the new P-TMSI. 2) If the network accepts the routing area updating procedure from the MS without reallocation of the old P-TMSI, the MS shall continue communic...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.1.2 Test purpose
To test the behaviour of the MS if the network accepts the routing area updating procedure. The following cases are identified: 1) P-TMSI / P-TMSI signature is reallocated; 2) Old P-TMSI / P-TMSI signature is not changed.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.1.3 Method of test
Initial conditions System Simulator: Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells are operating in network operation mode II. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B). - MS operat...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.2 Routing area updating / rejected / IMSI invalid / illegal ME
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.2.1 Conformance requirement
1) If the network rejects a routing area updating procedure from the Mobile Station with the cause 'Illegal ME', the Mobile Station shall consider SIM invalid for GPRS services until power is switched off or SIM is removed. 2) If the network rejects a routing area updating procedure from the Mobile Station with the cau...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.2.2 Test purpose
To test the behaviour of the MS if the network rejects the routing area updating procedure of the MS with the cause 'Illegal ME'.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.2.3 Method of test
Initial conditions System Simulator: Three cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2, cell C in MCC2/MNC1/LAC1/RAC1. All three cells are operating in network operation mode II. Mobile Station: The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A. S...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.3 Routing area updating / rejected / MS identity cannot be derived by the network
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.3.1 Conformance requirement
If the network rejects a routing area updating procedure from the Mobile Station with the cause 'MS identity cannot be derived by the network', the Mobile Station shall delete the stored RAI, GPRS-CKSN, P-TMSI and P-TMSI signature. Depending on the manufacturer the MS may or may not perform a GPRS attach procedure. Ref...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.3.2 Test purpose
To test the behaviour of the MS if the network rejects the routing area updating procedure of the MS with the cause 'MS identity cannot be derived by the network'.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.3.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells are operating in network operation mode II. Mobile Station: The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A. Specific PICS statements: - MS operatio...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.4 Routing area updating / rejected / location area not allowed
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.4.1 Conformance requirement
1) If the network rejects a routing area updating procedure from the Mobile Station with the cause 'location area not allowed' the Mobile Station shall: 1.1 not perform GPRS attach when in the same location area; 1.2 delete the stored RAI, GPRS-CKSN, P-TMSI and P-TMSI signature; 1.3 store the LA in the 'forbidden locat...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.4.2 Test purpose
To test the behaviour of the MS if the network rejects the routing area updating procedure of the MS with the cause 'Location Area not allowed'. To test that the MS deletes the list of forbidden LAs when power is switched off.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.4.3 Method of test
Initial conditions System Simulator: Three cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2, cell C in MCC1/MNC1/LAC2/RAC1. All cells are operating in network operation mode II. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell C. Specific PICS stateme...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.5 Routing area updating / abnormal cases / attempt counter check / miscellaneous reject causes
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.5.1 Conformance requirement
1) When a routing area updating procedure is rejected with the routing area updating attempt counter less than five, the Mobile Station shall repeat the routing area updating procedure after T3311 timeout. 2) When a routing area updating procedure is rejected with the routing area updating attempt counter five, the Mob...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.5.2 Test purpose
To test the behaviour of the MS with respect to the routing area updating attempt counter.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.5.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. T3302 is set to 12 minutes. The ATT-flag shall indicate that the MS should use IMSI attach/detach procedures. Both cells are operating in network operation mode II. Mobile Station...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.6 Routing area updating / abnormal cases / change of cell into new routing area
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.6.1 Conformance requirement
When a change of cell into a new routing area is performed before the routing area updating procedure is finished, the MS shall abort the routing area updating procedure and re-initiate it in the new routing area. Reference(s): 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.1.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.6.2 Test purpose
To test the behaviour of the MS in case of procedure collision.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.6.3 Method of test
Initial conditions System Simulator: Three cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2 and cell C In MCC1/MNC1/LAC1/RAC3. All cells are operating in network operation mode II. Mobile Station: The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A. Specific PICS statements: - MS oper...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.7 Routing area updating / abnormal cases / change of cell during routing area updating procedure
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.7.1 Conformance requirement
When a change of cell within a new routing area is performed before the routing area updating procedure is finished, the MS shall perform the cell update before the routing area updating procedure is finished. Reference(s): 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.1.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.7.2 Test purpose
To test the behaviour of the MS in case of procedure collision.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.7.3 Method of test
Initial conditions System Simulator: Three cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2 and cell C in MCC1/MNC1/LAC1/RAC2. All three cells are operating in network operation mode II. Mobile Station: The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A. Specific PICS statements: - M...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.8 Routing area updating / abnormal cases / P-TMSI reallocation procedure collision
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.8.1 Conformance requirement
When a P-TMSI reallocation COMMAND message is received by the MS while waiting for a ROUTING AREA UPDATE ACCEPT message, the MS shall ignore the P-TMSI reallocation procedure and continue with the routing area updating procedure. Reference(s): 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.1.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.8.2 Test purpose
To test the behaviour of the MS in case of procedure collision.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.8.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 and cell B in MCC1/MNC1/LAC1/RAC2. Both cells are operating in network operation mode II. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode C (T...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.9 Routing area updating / abnormal cases / Network reject with Extended Wait Timer
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.9.1 Conformance requirement
#22 (Congestion); If the T3346 value IE is present in the ROUTING AREA UPDATE REJECT message and the value indicates that this timer is neither zero nor deactivated, the MS shall proceed as described below, otherwise it shall be considered as an abnormal case and the behaviour of the MS for this case is specified in su...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.9.2 Test purpose
1. To verify that the LAP indicator can be set in the UE 2. To verify that the Delay Tolerant indicator is sent by the UE 3. To verify that the UE uses the back-off timer if the network reject a request with the Extended Wait Timer
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.9.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells are operating in network operation mode II. Mobile Station: The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A. The MS is configured for “low access pr...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.10 Routing area updating / eDRX
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.10.1 Conformance requirement
1) If the MS supports eDRX and requests the use of eDRX, the MS shall include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message. 2) The MS shall use the extended idle mode DRX cycle only if the network has provided the extended DRX parameters IE during the last ROUTING AREA UPDATE procedure. Ref...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.10.2 Test purpose
To verify that a MS that supports eDRX and requests the use of eDRX will include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message. To verify that a MS that supports eDRX and requests the use of eDRX will use the extended idle mode DRX cycle only if the network has provided the extended DRX para...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.10.3 Method of test
Initial conditions System Simulator: - Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. - Both cells are operating in network operation mode II. - Both cells support eDRX. Mobile Station: - The MS has a valid IMSI. MS is Idle Updated on cell A. - The MS is configured to use eDRX. - The MS is con...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.11 Routing area updating / eDRX / Usage condition change
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.11.1 Conformance requirement
1) If a change in the eDRX usage conditions at the MS requires eDRX activation or deactivation, or a change of different extended DRX parameters, the MS shall initiate the routing area updating procedure and include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message. 2) The MS shall use the exte...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.11.2 Test purpose
To verify that a MS shall initiate the routing area updating procedure and include the extended DRX parameters IE in the ROUTING AREA UPDATE REQUEST message if there is a change of eDRX usage conditions. To verify that a MS that supports eDRX and requests the use of eDRX will use the extended idle mode DRX cycle only i...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.1.11.3 Method of test
Initial conditions System Simulator: - One cell operating in network operation mode II. - The cell supports eDRX. Mobile Station: - The MS has a valid IMSI. MS is Idle Updated on cell A. - The MS is configured to deactivate eDRX. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B). - MS operation mo...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2 Combined routing area updating
The combined routing area updating procedure is a GMM procedure used by GPRS MSs of MS operation mode A or B that are IMSI attached for GPRS and non-GPRS services. In order to use the combined routing area updating procedure, the network must operate in network operation mode I.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.1 Combined routing area updating / combined RA/LA accepted
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.1.1 Conformance requirement
1) If the network accepts the combined routing area updating procedure and reallocates a P-TMSI, the MS shall acknowledge the new P-TMSI and continue communication with the new P-TMSI. 2) If the network accepts the combined routing area updating procedure from the MS without reallocation of the old P-TMSI, the MS shall...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.1.2 Test purpose
To test the behaviour of the MS if the network accepts the combined routing area updating procedure. The following cases are identified: 1) P-TMSI / P-TMSI signature is reallocated; 2) Old P-TMSI / P-TMSI signature is not changed; 3) Mobile terminating CS call is allowed with IMSI; 4) Mobile terminating CS call is allo...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.1.3 Method of test
Initial conditions System Simulator: Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B)- MS operation mod...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.2 Combined routing area updating / MS in CS operation at change of RA
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.2.1 Conformance requirement
GPRS MS that is in an ongoing CS transaction at change of routing area shall initiate the routing area updating procedure only after the CS transaction has been released. Reference(s): 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.5.2.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.2.2 Test purpose
To test the behaviour of the MS when using the combined routing area updating procedure in cases where the MS is CS connected at change of RA.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.2.3 Method of test
Initial conditions System Simulator: Two cells, cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B)- Switch off on bu...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.3 Combined routing area updating / RA only accepted
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.3.1 Conformance requirement
1) If the network accepts the combined routing area updating procedure, but GMM cause code 'IMSI unknown in HLR' is sent to the MS the Mobile Station shall delete the stored TMSI, LAI and CKSN. The Mobile Station shall consider SIM invalid for non-GPRS services until power is switched off or SIM is removed. 2) If the n...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.3.2 Test Purpose
Test purpose 1 To test the behaviour of the MS if the network accepts the routing area updating procedure with indication RA only, GMM cause 'IMSI unknown in HLR'. Test purpose 2 To test the behaviour of the MS if the network accepts the routing area updating procedure with indication RA only, GMM cause 'MSC temporaril...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.3.3 Method of test
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.3.3.1 Test Procedure 1
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode B (TSPC_oper...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.3.3.2 Test Procedure 2
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC1/RAC2. Both cells operating in network operation mode I. T3212 is set to 6 minutes. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS ...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.4 Combined routing area updating / rejected / PLMN not allowed
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.4.1 Conformance requirement
1) If the network rejects a combined routing area updating procedure from the Mobile Station with the cause 'PLMN not allowed' the Mobile Station shall: 1.1. not perform combined GPRA attach when switched on in the same location area or PLMN; 1.2. delete the stored RAI, GPRS-CKSN, P-TMSI, P-TMSI signature, TMSI CKSN an...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.4.2 Test purpose
To test the behaviour of the MS if the network rejects the combined routing area updating procedure of the MS with the cause 'PLMN not allowed'.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.4.3 Method of test
Initial conditions System Simulator: Four cells (not simultaneously activated), cell A in MCC1/MNC2/LAC1/RAC1, cell B in MCC1/MNC2/LAC1/RAC2, cell C in MCC1/MNC2/LAC2/RAC1 and cell D in MCC2/MNC1/LAC1/RAC1. All four cells are operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Upd...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.5 Combined routing area updating / rejected / roaming not allowed in this location area
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.5.1 Conformance requirement
For a R97 and R98 MS only: 1) If the network rejects a combined routing area updating procedure from the Mobile Station with the cause 'roaming not allowed in this location area' the Mobile Station: 1.1 shall not perform combined GPRS attach when in the same location area; 1.2 shall delete the stored RAI, GPRS-CKSN, P-...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.5.2 Test purpose
Test purpose 1 To test that on receipt of a rejection using the 'Roaming not allowed in this area' cause code, the MS ceases trying a routing area updating procedure on that location area. Successful combined routing area updating procedure is possible in other location areas. Test purpose 2 To test that if the MS is s...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.5.3 Method of test
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.5.3.1 Test procedure 1
Initial conditions System Simulator: Two cells, cell A in MCC2/MNC1/LAC1/RAC1 (RAI-2), cell B in MCC2/MNC1/LAC2/RAC1 (RAI-6). Both cells are operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.5.3.2 Test procedure 2
Initial conditions System Simulator: Two cells, cell A in MCC2/MNC1/LAC1/RAC1, cell B in MCC2/MNC1/LAC2/RAC1. Both cells are operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: - MS operation mode B (TSPC_operation_mode_B)- MS operation...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.6 Combined routing area updating / abnormal cases / access barred due to access class control
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.6.1 Conformance requirement
1) The MS shall not perform combined routing area updating procedure, but stays in the current serving cell and applies normal cell reselection process. 2) The Mobile Station shall perform the combined routing area updating procedure when: 2.1 Access is granted. 2.2 Cell is changed. Reference(s): 3GPP TS 04.08 / 3GPP T...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.6.2 Test purpose
Test purpose 1 To test the behaviour of the MS in case of access class control (access is granted). Test purpose 2 To test the behaviour of the MS in case of access class control (cell is changed).
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.6.3 Method of test
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.6.3.1 Test procedure 1
Initial conditions An access class x (0-15) is arbitrarily chosen. The SIM is programmed with this access class x. Communication with mobile stations using access class x is initially indicated to be barred on Cell B. System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 has Access C...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.6.3.2 Test procedure 2
Initial conditions An access class x (0-15) is arbitrarily chosen. The SIM is programmed with this access class x. Communication with mobile stations using access class x is indicated to be barred on cell B. System Simulator: Three cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 has access class x n...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.7 Combined routing area updating / abnormal cases / attempt counter check / procedure timeout
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.7.1 Conformance requirement
1) When a T3330 timeout has occurred during a routing area updating procedure, the Mobile Station shall repeat the routing area updating procedure after T3330 timeout until the procedure is repeated five times. 2) When a routing area updating procedure is repeated five times, the routing area updating attempt counter i...
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.7.2 Test purpose
To test the behaviour of the MS with respect to the routing area updating attempt counter.
683b5b8a98f7b1390ddd5516ea9247a2
51.010-1
44.2.3.2.7.3 Method of test
Initial conditions System Simulator: Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC/LAC1/RAC2. T3302 is set to 12 minutes. Both cells are operating in network operation mode I. Mobile Station: The MS has a valid IMSI. MS is Idle Updated on cell A. Specific PICS statements: -...