hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, , PBCCH not present, BS_CV_MAX = 0.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to transmit RLC dat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.5 Acknowledged mode / Uplink TBF / Invalid Negative Acknowledgment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.5.1 Conformance requirements | For a R97 and R98 MS only:
1. If the mobile station is the transmitter, it shall set an instance of timer T3198 for each RLC data block sent (subclause 9.1.3 3GPP TS 04.60).
2. The timer T3198 shall have the expiry value set to BS_CV_MAX block periods (subclause 9.1.3 3GPP TS 04.60).
3. The mobile station shall not mod... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.5.2 Test purpose | To verify the correct response of the mobile station to an invalid negative acknowledgement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.5.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, , PBCCH not present, BS_CV_MAX = 15.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
- GPRS Release (TSPC_MS_GPRS_RELEASE)
PIXIT Statements
-
Test Procedu... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.6 Acknowledged mode / Uplink TBF / Decoding of Received Block Bitmap | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.6.1 Conformance requirements | For each bit in the RBB whose corresponding BSN value is within the transmit window, if the bit contains the value '1', the corresponding element in V(B) indexed relative to SSN shall be set to the value ACKED. If the bit contains the value '0', the element in V(B) shall be set to the value NACKED. A bit within the RBB... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.6.2 Test purpose | 1. To verify the decoding of the received block bitmap of the Packet Uplink Ack/Nack message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.6.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to send RLC data blocks. The SS nega... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2 Acknowledged mode / Downlink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.1 Acknowledged mode / Downlink TBF / Receive state variable V(R) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.1.1 Conformance requirements | 1. In RLC acknowledged mode, each RLC endpoint receiver shall have an associated receive state variable V(R). The receive state variable denotes the BSN of the next in-sequence RLC data block expected to be received.
2. The mobile station shall set V(R) to the value 0 at the beginning of each TBF in which the RLC endpo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.1.2 Test purpose | 1. To verify correct initialisation of the receive state variable, V(R).
2. To verify the receive state variable, V(R) is set to the next in sequence RLC data block expected to be received. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
SS establishes a downlink TBF and sends RLC data bl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.2 Acknowledged mode / Downlink TBF / Receive window state variable V(Q) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.2.1 Conformance requirements | In RLC acknowledged mode, each RLC endpoint receiver shall have an associated receive window state variable, V(Q). The mobile station shall set V(Q) to the value 0 at the beginning of each TBF in which the RLC endpoint is the receiver.
The value of V(Q) shall be updated when the RLC receiver receives the RLC data block... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.2.2 Test purpose | 1. To verify that V(Q) is not updated when data blocks with BSN not equal to V(Q) are received. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
SS establishes a downlink TBF and sends an RLC data... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.3 Acknowledged mode / Downlink TBF / Re-assembly of RLC data blocks | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.3.1 Conformance requirements | RLC data blocks shall be collected at the receiver until all RLC data blocks comprising an LLC PDU have been received. The RLC headers shall be removed from each RLC data block at this time and the RLC data units re-assembled into an LLC PDU and passed to the next higher layer.
References
3GPP TS 04.60, subclause 9.1.1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.3.2 Test purpose | To verify the correct re-assembly of the RLC data blocks. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and PDP Context 12 is activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
SS establishes a downlink TBF and sends several data bl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.4 Acknowledged mode / Downlink TBF / Re-assembly / Length Indicator | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.4.1 Conformance requirements | 1. The Extension (E) bit is used to indicate the presence of an optional extension octet in the RLC data block header. The More (M) bit is used to indicate the presence of an LLC frame following the current LLC frame. The M bit, the E bit, and the Length Indicator, are used to delimit LLC frames within a TBF.
2. The Le... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.4.2 Test purpose | To verify the correct decoding of RLC data block length indication, more(M) and extension(E) bit fields during reassembly of LLC frames into RLC data blocks. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.2.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and PDP Context 12 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
SS establishes a downlink TBF and sends data blocks contai... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.2 Control Blocks | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.2.1 Control Blocks Re-assembly | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.2.1.1 Conformance requirements | The network may segment RLC/MAC control messages into one or two RLC/MAC control blocks depending on the length of the RLC/MAC control message.
RLC/MAC control blocks shall be collected at the receiver until all RLC/MAC control blocks comprising a RLC/MAC control message have been received. The receiving side shall det... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.2.1.2 Test purpose | To verify that the MS re-assembles a RLC control message If it spans across more than one RLC control block. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is switched on and triggered to perform a GPRS attach. The SS sends a PACKET UPLINK ASSIGNMENT message that spans more than one RLC... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.3 Default Message Contents and Macros | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.3.1 Message Contents | none |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.3.2 Macros | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.3.2.1 Macro for uplink dynamic allocation two phase access (PBCCH not present) | Step
Direction
Message
Comments
{Uplink dynamic allocation two phase access}
Macro parameters:
n: the number of data octets to be transferred,
USF_GRANULARITY: 1 or 4 blocks,
RLC_DATA_BLOCKS_GRANTED: 9-261 (close-end), or absent (open-end)
CHANNEL_CODING_COMMAND: CS-1, -2, -3, -4
TBF_STARTING_TIME
0
MS
Trigger the MS i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.3.2.2 Macro for downlink TBF establishment (PBCCH not present) | Step
Direction
Message
Comments
{Downlink TBF establishment}
Macro parameters:
TBF_STARTING_TIME
1
SS -> MS
PAGING REQUEST
Page info contains P-TMSI of the MS. Sent on PCH.
2
MS -> SS
CHANNEL REQUEST
Establishment cause = "One phase access". Received on RACH.
3
SS -> MS
IMMEDIATE ASSIGNMENT
Random Reference = pertainin... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4 EC-GSM-IoT | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1 EC-GSM-IoT / EC Uplink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.1 EC-GSM-IoT / Acknowledged mode / EC Uplink TBF / Transmit window size | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.1.1 Conformance requirements | For EC-GSM-IoT, i.e. for an EC TBF, the window size (WS) shall be 16.
…
Each RLC endpoint transmitter shall have an associated acknowledge state array (V(B)). V(B) is an array of SNS elements indicating the acknowledgement status of WS previous RLC data blocks. The array is indexed relative to the acknowledge state var... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.1.2 Test purpose | 1. To verify that the mobile station sets the stall indicator to 1 in each RLC data block transmitted once the transmit window is stalled.
2. To verify that the mobile station retransmits data blocks that are pending acknowledgment.
3. To verify that the mobile station retransmits unacknowledged RLC data blocks in corr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT
Mobile Station:
The MS is GPRS attached and in packet idle mode. PDP context 1 has been established.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS transmits 16 (EC TBF window size) blocks without acknowledgement from SS. Confirm that the MS:
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.2 EC-GSM-IoT / Packet transfer/ EC Uplink TBF/ Verification of Coding Schemes | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.2.1 Conformance requirements | 1. In EC TBF mode, RLC data blocks that are transmitted for the first time shall be transmitted with the MCS commanded, except if the commanded mode is MCS-5-7, in which case the data block shall be transmitted with MCS‑5, or if the commanded mode is MCS-6-9, in which case the data block shall be transmitted with MCS-6... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.2.2 Test purpose | 1. To verify that the mobile station uses the correct channel coding commanded by the Network for initial transmission for specific EC channels MCS-1/M.
2. To verify that correct channel coding command is used for retransmission. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT.
Mobile Station:
The MS is EC operation with a P-TMSI allocated, and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
- Support of PSK in uplink (TSPC_Type_EGPRS_8PSK_uplink)
Test Procedure
The EC capable MS is made to transmit uplink R... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.2 EC-GSM-IoT / EC Downlink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.2.1 EC-GSM-IoT / Packet transfer / EC Downlink TBF / Decoding of Coding Schemes | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.2.1.1 Conformance requirements | 1- In EC TBF mode, the transfer of RLC Data Blocks in the acknowledged RLC/MAC mode may be controlled by a selective type I ARQ mechanism, or by type II hybrid ARQ mechanism, coupled with the numbering of the RLC Data Blocks within one Temporary Block Flow.
2. According to the link quality, an initial Modulation and Co... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.2.1.2 Test purpose | To verify that the mobile station correctly decode RLC data blocks sent using different coding schemes (MCS-1 to MCS-9). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.4.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT.
Mobile Station:
The MS is EC operation with a P-TMSI allocated, and the test PDP context2 activated
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The SS establishes a Downlink EC TBF.
The SS sends a few RLC data blocks in different coding schemes a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44 Test case requirements for GPRS mobility management | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.1 Default conditions and default messages | Note that only the layer 3 messages are described in the document. The mapping of the layer 3 messages to lower layers and the use of logical channels is not described in the present document.
The default conditions and default message contents not specified in this clause must be set as in "GPRS default conditions".
B... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2 Elementary procedures of GPRS mobility management | The tests are based on 3GPP TS 04.08 / 3GPP TS 24.008. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1 GPRS attach procedure | This procedure is used to indicate for the network that the IMSI is available for traffic by establishment of a GMM context. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1 Normal GPRS attach | The normal GPRS attach procedure is a GMM procedure used by GPRS MSs of MS operation mode B or C to IMSI attach for GPRS services only. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.1 GPRS attach / accepted | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.1.1 Conformance requirement | 1) If the network accepts the GPRS attach procedure (signalled by an IMSI) and allocates a P-TMSI, the MS shall acknowledge the P-TMSI and continue communication with the P-TMSI.
2) If the network accepts the GPRS attach procedure (signalled by P-TMSI) and reallocates a new P-TMSI, the MS shall acknowledge the new P-TM... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.1.2 Test purpose | To test the behaviour of the MS if the network accepts the GPRS attach procedure.
The following cases are identified:
1) P-TMSI / P-TMSI signature is allocated;
2) P-TMSI / P-TMSI signature is reallocated;
3) Old P-TMSI / P-TMSI signature is not changed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.1.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid IMSI. MS is Idle Updated.
Specific PICS statements:
- MS operation mode B (TSPC_operation_mode_B).
- MS operation mode C (TSPC_operation_mode_C).
- Switch off on button (TSPC_Feat_OnOff).
- Automati... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.2 GPRS attach / rejected / IMSI invalid / illegal MS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.2.1 Conformance requirements | 1) If the network rejects a GPRS attach procedure from the Mobile Station with the cause 'Illegal MS', the Mobile Station shall consider SIM invalid for GPRS services until power is switched off or SIM is removed.
2) If the network rejects a GPRS attach procedure from the Mobile Station with the cause 'Illegal MS' the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.2.2 Test purpose | To test the behaviour of the MS if the network rejects the GPRS attach procedure of the MS with the cause 'illegal MS'. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.2.3 Method of test | Initial conditions
System Simulator:
Three cells (not simultaneously activated), cell A with MCC1/MNC1/LAC1/RAC1, cell B in MCC1/MNC1/LAC2/RAC1, cell C in MCC2/MNC1/LAC1/RAC1.
All three cells are operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.3 GPRS attach / rejected / IMSI invalid / GPRS services not allowed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.3.1 Conformance requirement | 1) If the network rejects a GPRS attach procedure from the Mobile Station with the cause 'GPRS services not allowed', the Mobile Station shall consider SIM invalid for GPRS services until power is switched off or SIM is removed.
2) If the network rejects a GPRS attach procedure from the Mobile Station with the cause 'G... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.3.2 Test purpose | To test the behaviour of the MS if the network rejects the GPRS attach procedure of the MS with the cause 'GPRS services not allowed' (no valid GPRS-subscription for the IMSI). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.3.3 Method of test | Initial conditions
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC1/LAC1/RAC1 (HPLMN) and cell B in MCC2/MNC1/LAC1/RAC1.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A.
Specific PICS statements:
- ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.4 GPRS attach / rejected / PLMN not allowed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.4.1 Conformance requirement | 1) If the network rejects a GPRS attach procedure from the Mobile Station with the cause 'PLMN not allowed' the Mobile Station shall:
1.1 not perform GPRS attach when switched on in the same routing area or location area;
1.2 not perform GPRS attach when in the same PLMN and when that PLMN is not selected manually;
1.3... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.4.2 Test purpose | To test the behaviour of the MS if the network rejects the GPRS attach procedure of the MS with the cause 'PLMN not allowed'. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.4.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.4.3.1 Test procedure 1 | Initial conditions
System Simulator:
Four cells (not simultaneously activated), cell A in MCC1/MNC2/LAC1/RAC1, cell B in MCC1/MNC2/LAC1/RAC1, cell C in MCC1/MNC2/LAC2/RAC1 and cell D in MCC2/MNC1/LAC1/RAC1.
- All four cells are operating in network operation mode II. The PLMN of the four cells should NOT be that of the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.4.3.2 Test procedure 2 | Initial conditions
System Simulator:
One cell operating in network operation mode II: MCC2/MNC1/LAC1/RAC1. The PLMN of the cell should NOT be that of the Mobile Station Home PLMN.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-2. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode C (TSPC_o... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5 GPRS attach / rejected / roaming not allowed in this location area | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.1 Conformance requirement | 1) If the network rejects a GPRS attach procedure from the Mobile Station with the cause 'roaming not allowed in this location area' the Mobile Station shall:
1.1 not perform GPRS attach when in the same location area;
1.2 delete the stored RAI, GPRS-CKSN, P-TMSI and P-TMSI signature;
1.3 store the LA in the 'forbidden... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.2 Test purpose | Test purpose 1
To test that on receipt of a rejection using the 'roaming not allowed in this location area' cause code, the MS ceases trying to attach on that location area. Successful GPRS attach procedure is possible in other location areas.
Test purpose 2
To test that if the MS is switched off or the SIM is removed ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.3.1 Test procedure 1 | Initial conditions
System Simulator:
Three cells (not simultaneously activated), cell A in MCC2/MNC1/LAC1/RAC1 (Not HPLMN), cell B in MCC2/MNC1/LAC2/RAC1 (Not HPLMN) and cell C in MCC2/MNC1/LAC1/RAC2 (Not HPLMN).
All three cells are operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.3.2 Test procedure 2 | Initial conditions
System Simulator:
One cell in MCC2/MNC1/LAC1/RAC1 (Not HPLMN) operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-2. MS is Idle Updated.
Specific PICS statements:
- MS operation mode C (TSPC_operation_mode_C).
- MS operation mode B (TSPC_operation_mode_B) (only... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.3.3 Test procedure 3 | Initial conditions
System Simulator:
Six cells (not simultaneously activated), cell A in MCC2/MNC1/LAC1/RAC1 (Not HPLMN), cell B in MCC2/MNC1/LAC2/RAC1 (Not HPLMN), cell C in MCC2/MNC1/LAC3/RAC1 (Not HPLMN), cell D in MCC2/MNC1/LAC4/RAC1 (Not HPLMN), cell E in MCC2/MNC1/LAC5/RAC1 (Not HPLMN), cell F in MCC2/MNC1/LAC6/R... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.5.3.4 Test procedure 4 | Initial conditions
System Simulator:
Two cells, cell A in MCC2/MNC1/LAC1/RAC1 (not HPLMN) and cell B in MCC1/MNC1/LAC1/RAC1 (HPLMN).
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-2. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.6 GPRS attach / abnormal cases / access barred due to access class control | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.6.1 Conformance requirement | 1) The MS shall not perform GPRS attach procedure, but stays in the current serving cell and applies normal cell reselection process.
2) The Mobile Station shall perform the GPRS attach procedure when:
2.1 Access is granted.
2.2 Cell is changed.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.3.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.6.2 Test purpose | Test purpose 1
To test the behaviour of the MS in case of access class control (access is granted).
Test purpose 2
To test the behaviour of the MS in case of access class control (cell is changed). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.6.3 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.6.3.1 Test procedure 1 | Initial conditions
An access class x (0-15) is arbitrarily chosen. The SIM is programmed with this access class x. Communication with mobile stations using access class x is initially indicated to be barred.
System Simulator:
One cell operating in network operation mode II.
Access class x barred.
Mobile Station:
The MS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.6.3.2 Test procedure 2 | Initial conditions
An access class x (0-15) is arbitrarily chosen. The SIM is programmed with this access class x. Communication with mobile stations using access class x is indicated to be barred on cell A.
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1 has access class x barred, cell B in MCC1/MNC1/LAC1/R... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.7 GPRS attach / abnormal cases / change of cell into new routing area | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.7.1 Conformance requirement | When a change of cell into a new routing area is performed before ATTACH ACCEPT message is received by the MS, the MS shall abort the GPRS attach procedure and re-initiate it immediately.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.3.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.7.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.7.3 Method of test | Initial conditions
System Simulator:
Two cells, cell A in MCC1/MNC1/LAC1/RAC1 and cell B in MCC1/MNC1/LAC1/RAC2.
Both cells are operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated on cell A.
Specific PICS statements:
- MS operation mode C (TSPC_operation_mod... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.8 GPRS attach / abnormal cases / power off | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.8.1 Conformance requirement | When power is switched off before ATTACH ACCEPT message is received by the MS, the MS shall abort the GPRS attach procedure and perform a GPRS detach procedure.
Reference(s):
3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.7.3.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.8.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.8.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated.
Specific PICS statements:
- MS operation mode C (TSPC_operation_mode_C).
- MS operation mode B (TSPC_operation_mode_B).
- Switch off on button (TSPC_Feat_OnOf... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.9 GPRS attach / abnormal cases / GPRS detach procedure collision | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.9.1 Conformance requirement | 1) When a DETACH REQUEST message is received by the MS (Detach type 're-attach not required') while waiting for an ATTACH ACCEPT message, the MS shall terminate the GPRS attach procedure and continue with the GPRS detach procedure.
2) When a DETACH REQUEST message is received by the MS (Detach type 're-attach required'... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.9.2 Test purpose | To test the behaviour of the MS in case of procedure collision. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 44.2.1.1.9.3 Method of test | Initial conditions
System Simulator:
One cell operating in network operation mode II.
Mobile Station:
The MS has a valid P-TMSI-1 and RAI-1. MS is Idle Updated.
Specific PICS statements:
- MS operation mode C (TSPC_operation_mode_C).
- MS operation mode B (TSPC_operation_mode_B) (only if mode C not supported).
- Switch... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.