Datasets:
laser_power_w int64 500 80k | material stringclasses 5
values | thickness_mm float64 0.8 200 | assist_gas stringclasses 5
values | gas_pressure_bar float64 0.5 20 | speed_min_m_min float64 0.04 70 | speed_max_m_min float64 0.05 70 | power_percent int64 15 100 | nozzle stringclasses 36
values | focus_mm float64 -25 15 ⌀ | cutting_height_min_mm float64 0.3 1.2 ⌀ | cutting_height_max_mm float64 0.3 1.5 ⌀ | source_setup stringclasses 82
values | page_url stringclasses 41
values |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
500 | carbon_steel | 1 | N2/Air | 14 | 10 | 12 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
500 | carbon_steel | 2 | O2 | 14 | 3.2 | 3.8 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
500 | carbon_steel | 3 | O2 | 14 | 2 | 2.2 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
500 | carbon_steel | 4 | O2 | 14 | 1.5 | 1.6 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
500 | carbon_steel | 5 | O2 | 14 | 0.9 | 1.1 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
500 | carbon_steel | 6 | O2 | 14 | 0.6 | 0.7 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
500 | stainless_steel | 1 | N2/Air | 14 | 11 | 13 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
500 | stainless_steel | 2 | N2/Air | 14 | 2.6 | 2.8 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
500 | stainless_steel | 3 | N2/Air | 14 | 0.9 | 1.1 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
500 | stainless_steel | 4 | N2/Air | 14 | 0.5 | 0.6 | 100 | null | null | null | null | Source model: 500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
500 | aluminum | 1 | N2/Air | 14 | 2.5 | 2.7 | 100 | null | null | null | null | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/aluminium/ |
500 | brass | 1 | N2/Air | 14 | 2.3 | 2.5 | 100 | null | null | null | null | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,000 | carbon_steel | 0.8 | N2/Air | 11 | 19 | 19 | 100 | null | null | null | null | Source model: Max MFSC-1000X QBH | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 1 | N2/Air | 14 | 20 | 22 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel-1mm-1000w/ |
1,000 | carbon_steel | 2 | N2/Air | 14 | 6 | 7 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 3 | O2 | 0.8 | 2.8 | 3 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 4 | O2 | 0.8 | 2.2 | 2.4 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 5 | O2 | 0.8 | 1.5 | 1.7 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 6 | O2 | 0.8 | 1.2 | 1.4 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 8 | O2 | 0.8 | 1 | 1.1 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 9 | N2/Air | 16 | 0.6 | 0.6 | 100 | null | null | null | null | Hot-rolled steel (mixed gas). Source model: 1000W | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 10 | O2 | 0.8 | 0.75 | 0.85 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 12 | O2 | 0.8 | 0.6 | 0.65 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | carbon_steel | 14 | N2/Air | 16 | 0.07 | 0.07 | 100 | null | null | null | null | Cold-rolled steel. Source model: 1000W | https://sbmlaserhelp.com/answers/mild-steel/ |
1,000 | stainless_steel | 0.8 | N2/Air | 16 | 20 | 20 | 100 | null | null | null | null | Source model: Max MFSC-1000X QBH | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,000 | stainless_steel | 1 | N2/Air | 14 | 21 | 23 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel-1mm-1000w/ |
1,000 | stainless_steel | 2 | N2/Air | 14 | 6.5 | 7 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel-2mm-1000w/ |
1,000 | stainless_steel | 3 | N2/Air | 14 | 2.3 | 2.5 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel-3mm-1000w/ |
1,000 | stainless_steel | 4 | N2/Air | 14 | 1.4 | 1.6 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,000 | stainless_steel | 5 | N2/Air | 14 | 0.6 | 0.7 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,000 | stainless_steel | 6 | N2/Air | 14 | 0.5 | 0.6 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,000 | aluminum | 0.8 | N2/Air | 16 | 19 | 19 | 100 | null | null | null | null | Source model: Max MFSC-1000X QBH | https://sbmlaserhelp.com/answers/aluminium/ |
1,000 | aluminum | 1 | N2/Air | 14 | 15 | 17 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,000 | aluminum | 2 | N2/Air | 14 | 3.5 | 4 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,000 | aluminum | 3 | N2/Air | 14 | 1.4 | 1.6 | 100 | null | null | null | null | Source model: 1000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,000 | brass | 1 | N2/Air | 14 | 13 | 15 | 100 | null | null | null | null | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,000 | brass | 2 | N2/Air | 14 | 3 | 3.5 | 100 | null | null | null | null | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,000 | brass | 3 | N2/Air | 14 | 0.9 | 1.1 | 100 | null | null | null | null | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,500 | carbon_steel | 1 | N2/Air | 16 | 20 | 20 | 100 | 1.5S | 0 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 1.5 | O2 | 4 | 9 | 9 | 100 | 1.5S | 2.8 | 0.5 | 0.5 | Cold-rolled steel. Source model: 1500W | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 2 | O2 | 2 | 5 | 5 | 100 | 1.2D | 3 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 3 | O2 | 0.6 | 3.6 | 3.6 | 100 | 1.2D | 3 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 4 | O2 | 0.6 | 2.5 | 2.5 | 100 | 1.2D | 3 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 5 | O2 | 0.6 | 1.8 | 1.8 | 100 | 1.2D | 3 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 6 | O2 | 0.6 | 1.4 | 1.4 | 100 | 1.5D | 3 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 7 | O2 | 0.6 | 1.56 | 1.56 | 100 | 1.2D | 1.8 | 0.6 | 0.6 | Source model: IPG 1500W, Head: OSPRI | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 8 | O2 | 0.6 | 1.2 | 1.2 | 100 | 1.5D | 3 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 10 | O2 | 0.6 | 1 | 1 | 100 | 2.0D | 2.5 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 12 | O2 | 0.6 | 0.8 | 0.8 | 100 | 2.5D | 2.5 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 14 | O2 | 0.6 | 0.65 | 0.65 | 100 | 3.0D | 2.5 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | carbon_steel | 16 | O2 | 0.6 | 0.5 | 0.5 | 100 | 3.0D | 2.5 | 0.7 | 1 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
1,500 | stainless_steel | 1 | N2/Air | 16 | 20 | 20 | 100 | 1.5S | 0 | 0.5 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,500 | stainless_steel | 2 | N2/Air | 16 | 7 | 7 | 100 | 2.0S | -1 | 0.5 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,500 | stainless_steel | 3 | N2/Air | 16 | 4.5 | 4.5 | 100 | 2.5S | -1.5 | 0.5 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,500 | stainless_steel | 4 | N2/Air | 16 | 2.5 | 2.5 | 100 | 2.0S | -2 | 0.6 | 0.6 | Source model: Raycus 1500W | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,500 | stainless_steel | 5 | N2/Air | 16 | 1.5 | 1.5 | 100 | 3.0S | -2.5 | 0.5 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,500 | stainless_steel | 6 | N2/Air | 16 | 0.8 | 0.8 | 100 | 3.0S | -3 | 0.5 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
1,500 | aluminum | 1 | N2/Air | 16 | 18 | 18 | 100 | 1.5S | 0 | 0.4 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,500 | aluminum | 2 | N2/Air | 16 | 6 | 6 | 100 | 2.0S | -1 | 0.4 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,500 | aluminum | 3 | N2/Air | 16 | 2.5 | 2.5 | 100 | 2.5S | -1.5 | 0.4 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,500 | aluminum | 4 | N2/Air | 16 | 0.8 | 0.8 | 100 | 3.0S | -2 | 0.4 | 0.7 | Source model: 1500W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
1,500 | aluminum | 5 | N2/Air | 16 | 0.61 | 0.61 | 100 | 2.5S | -2.2 | 0.6 | 0.6 | Source model: IPG 1500W, Head: Raytools | https://sbmlaserhelp.com/answers/aluminium/ |
1,500 | brass | 1 | N2/Air | 16 | 15 | 15 | 100 | 1.5S | 0 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,500 | brass | 2 | N2/Air | 16 | 5 | 5 | 100 | 2.0S | -1 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,500 | brass | 3 | N2/Air | 16 | 1.8 | 1.8 | 100 | 2.5S | -1.5 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
1,500 | brass | 4 | N2/Air | 16 | 1 | 1 | 100 | 3.0S | -2 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | carbon_steel | 1 | N2/Air | 14 | 25 | 25 | 100 | 1.5S | 0 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel-1mm-2000w/ |
2,000 | carbon_steel | 2 | O2 | 1.6 | 5.2 | 5.2 | 100 | 1.0D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel-2mm-2000w/ |
2,000 | carbon_steel | 3 | O2 | 0.6 | 4.2 | 4.2 | 100 | 1.0D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 4 | O2 | 0.6 | 3 | 3 | 100 | 1.0D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 5 | O2 | 0.6 | 2.2 | 2.2 | 100 | 1.2D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 6 | O2 | 0.6 | 1.8 | 1.8 | 100 | 1.2D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 8 | O2 | 0.5 | 1.3 | 1.3 | 100 | 2.0D | 2.5 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 10 | O2 | 0.5 | 1.1 | 1.1 | 100 | 2.0D | 2.5 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 12 | O2 | 0.5 | 0.9 | 0.9 | 100 | 2.5D | 2.5 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 14 | O2 | 0.5 | 0.8 | 0.8 | 100 | 3.0D | 2.5 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 16 | O2 | 0.6 | 0.7 | 0.7 | 95 | 3.5D | 2.5 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 18 | O2 | 0.6 | 0.5 | 0.5 | 95 | 4.0D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | carbon_steel | 20 | O2 | 0.6 | 0.4 | 0.4 | 95 | 4.0D | 3 | 0.7 | 1 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/mild-steel/ |
2,000 | stainless_steel | 1 | N2/Air | 16 | 28 | 28 | 100 | 1.5S | 0 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | stainless_steel | 2 | N2/Air | 16 | 10 | 10 | 100 | 2.0S | -1 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | stainless_steel | 3 | N2/Air | 16 | 5 | 5 | 100 | 2.0S | -1.5 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | stainless_steel | 4 | N2/Air | 16 | 3 | 3 | 100 | 2.5S | -2 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | stainless_steel | 5 | N2/Air | 16 | 2 | 2 | 100 | 3.0S | -2.5 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | stainless_steel | 6 | N2/Air | 16 | 1.5 | 1.5 | 100 | 3.0S | -3 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | stainless_steel | 8 | N2/Air | 16 | 0.6 | 0.6 | 100 | 3.0S | -4 | 0.5 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/stainless-steel/ |
2,000 | aluminum | 1 | N2/Air | 16 | 20 | 20 | 100 | 1.5S | 0 | 0.4 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
2,000 | aluminum | 2 | N2/Air | 16 | 10 | 10 | 100 | 2.0S | -1 | 0.4 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
2,000 | aluminum | 3 | N2/Air | 16 | 4 | 4 | 100 | 2.0S | -1.5 | 0.4 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
2,000 | aluminum | 4 | N2/Air | 16 | 1.5 | 1.5 | 100 | 2.5S | -2 | 0.4 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
2,000 | aluminum | 5 | N2/Air | 16 | 0.9 | 0.9 | 100 | 3.0S | -2.5 | 0.4 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
2,000 | aluminum | 6 | N2/Air | 16 | 0.6 | 0.6 | 100 | 3.0S | -3 | 0.4 | 0.7 | Source model: 2000W(50u), Cutting head focal length: Collimating 100/Focal 125 | https://sbmlaserhelp.com/answers/aluminium/ |
2,000 | brass | 1 | N2/Air | 16 | 18 | 18 | 100 | 1.5S | 0 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | brass | 2 | N2/Air | 16 | 8 | 8 | 100 | 2.0S | -1 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | brass | 3 | N2/Air | 16 | 3 | 3 | 100 | 2.5S | -1.5 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | brass | 4 | N2/Air | 16 | 1.3 | 1.3 | 100 | 3.0S | -2 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | brass | 5 | N2/Air | 16 | 0.8 | 0.8 | 100 | 3.0S | -2.5 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | brass | 6 | N2/Air | 16 | 0.4 | 0.4 | 100 | 3.5S | -3 | 0.3 | 0.5 | Make sure your laser source has back-reflection protection — there is a risk of equipment failure due to back-reflection! | https://sbmlaserhelp.com/answers/brass/ |
2,000 | copper | 1 | O2 | 12 | 21 | 21 | 100 | 3.0S | -1 | 0.5 | 0.5 | Source model: Max Single module MFSC-2000X | https://sbmlaserhelp.com/answers/copper/ |
2,000 | copper | 2 | O2 | 12 | 6 | 6 | 100 | 3.0S | -1 | 0.5 | 0.5 | Source model: Max Single module MFSC-2000X | https://sbmlaserhelp.com/answers/copper/ |
Fiber laser cutting parameters
Starting cutting parameters for fiber laser cutting of sheet metal: mild steel, stainless steel, aluminium, brass and copper, from 0.5 kW to 80 kW. 1,128 rows, one per laser power, material, thickness and assist gas.
The same numbers are published on sbmlaserhelp.com and in the cutting parameters table on sbmlaser.com, and are used by the SBM Laser Help app for laser cutting operators. Every row links to the matching page on sbmlaserhelp.com.
Also on GitHub: SBM-Laser-Help/laser-cutting-parameters.
Files
| File | Format |
|---|---|
data/fiber-laser-cutting-parameters.csv |
CSV, UTF-8, comma-separated, header row |
data/fiber-laser-cutting-parameters.jsonl |
JSON Lines, one object per row, empty values are null |
Columns
| Column | Unit | Meaning |
|---|---|---|
laser_power_w |
W | Rated laser source power |
material |
carbon_steel (mild steel), stainless_steel, aluminum, brass, copper |
|
thickness_mm |
mm | Sheet thickness |
assist_gas |
O2, N2, Air or N2/Air (nitrogen or compressed air) |
|
gas_pressure_bar |
bar | Assist gas pressure |
speed_min_m_min, speed_max_m_min |
m/min | Cutting speed range; equal values mean a single value |
power_percent |
% | Laser power used for cutting |
nozzle |
Nozzle diameter in mm, S single-layer, D double-layer (for example 1.2D) |
|
focus_mm |
mm | Focus position; positive is above the sheet surface, negative is inside the sheet |
cutting_height_min_mm, cutting_height_max_mm |
mm | Nozzle-to-sheet distance |
source_setup |
Laser source and cutting head optics the row was set up on | |
page_url |
Page with this regime and alternatives on sbmlaserhelp.com |
nozzle, focus_mm and the cutting height are filled for 1.5, 2, 3, 6, 12 and 20 kW, as in the public table. For the other powers they are empty; they depend strongly on the cutting head and are available in the SBM Laser Help app.
Example
from datasets import load_dataset
df = load_dataset("SBMLaserHelp/fiber-laser-cutting-parameters", split="train").to_pandas()
row = df.query("laser_power_w == 3000 and material == 'carbon_steel' and thickness_mm == 6")
print(row[["assist_gas", "gas_pressure_bar", "speed_min_m_min", "speed_max_m_min", "nozzle", "focus_mm"]])
Use with care
These are starting values for test cuts, not guaranteed production settings. The right speed, focus and pressure depend on the laser source, cutting head, nozzle, gas purity and the sheet itself. Cut a test piece first and adjust. Focus sign conventions differ between control systems: check what positive focus means on yours.
Source and updates
The rows are compiled from parameter tables for the laser source and cutting head setups named in source_setup. Where several setups exist for one power, the most complete one is used. The table is exported from the same database that feeds the website and the app; the export date is in the commit history.
License
Data: Creative Commons Attribution 4.0 International (CC BY 4.0). You may copy, share and adapt it, including commercially, with attribution:
Fiber laser cutting parameters, SBM Laser Help, https://sbmlaserhelp.com/
About
SBM Laser Help is a helper for fiber laser cutting operators: cutting parameter tables, cut defect diagnosis from a photo, machine and chiller error codes, calculators and a free library of DXF drawings. Web, Android, iOS and Telegram, 12 languages. Made by the team behind SBMachines.
- Downloads last month
- -