Datasets:
image imagewidth (px) 1.02k 1.07k |
|---|
Yamato Protec — fire protection equipment (SimReady OpenUSD)
Simulation-ready OpenUSD assets of fire protection equipment, published by Yamato Protec Co., Ltd., the manufacturer of the products. This dataset starts with one asset and will grow.
These are simulation models for research and demonstration. They are not a substitute for the real products, their specifications or manuals, and must not be used to judge the performance, safety, fire-extinguishing capability, type approval or maintenance of the real products. See
NOTICE.txtinside each asset.
Assets
| Asset folder | What | Profile | Version |
|---|---|---|---|
ya-10nx/ |
Powder (ABC) pressurized fire extinguisher YA-10NX, with a working safety pin, stopper and lever, a pressure gauge and a hose | Robotics-Prop (NVIDIA SimReady Foundation) |
2026.11.11 |
Each asset folder is a SimReady package: the USD data in simready_usd/, and the validation results and package definition (.metadata/, com.nvidia.simready.packaging.json).
YA-10NX
- Entry point:
ya-10nx/simready_usd/ya-10nx.usda. The root prim is/YA_10NX; the asset class isfire_extinguisher(a proposed name, not defined by NVIDIA). - Pin: moves up to 120 mm. The stopper stays upright until the pin rod leaves the hole (about 22-26 mm), then tips by gravity (up to 80 degrees).
- Lever: up to 30 degrees, with a return spring. While the stopper is upright, the lever moves only about 1.4 degrees.
- Gauge: three states (normal / low / zero) as a variant set (
gaugeState). - Physics variants: PhysX, Newton and MuJoCo. The hose joints are handled differently per variant: in the PhysX variant they are excluded from the articulation (they diverge in reduced coordinates); in the Newton and MuJoCo variants the hose is part of the joint tree and only the loop-closing clip joint is excluded.
- Materials: UsdPreviewSurface, OpenPBR (MaterialX) and MDL.
- Size: about 27,600 visual triangles, 158 collision triangles, 5.08 kg in total (from the specification sheet).
- Estimated values: the real product has no articulation data. The mechanism, mass split, springs, friction and hose behavior are approximations, and several values are estimates marked
yp:estimated.
Videos
videos/ shows the asset in Isaac Sim 6.2 (PhysX, RTX) with a UR10e arm and a Robotiq 2F-140 gripper:
YA-10NX_robot_pick_and_place.mp4— lifts the extinguisher (5.08 kg) and places it on a pedestal.YA-10NX_robot_pull_pin_press_lever.mp4— pulls the safety pin and presses the lever. The pin joint is released after the pull, so the pin falls.
The robot and the environment are NVIDIA Isaac Sim assets and are not part of this dataset; please refer to NVIDIA's license terms for them. The videos carry a Yamato Protec watermark. The videos are © Yamato Protec Co., Ltd., all rights reserved. They are provided for viewing only and are not licensed under CC BY 4.0; do not remove the watermark or reuse them.
Intended use
These assets are meant for simulation, robotics, digital twins, training and education.
Validation
- NVIDIA SimReady Foundation
Robotics-Prop: PASSED (results inya-10nx/.metadata/). - NVIDIA SimReady benchmark in Isaac Sim 6.1.0.0 (PhysX and Newton engines): 30 tests, 28 passed, 0 failed, 2 skipped (
grasp_and_lift: the extinguisher has no grasp-target prim). Results inya-10nx/.metadata/ya-10nx_benchmark.json. - In the
joint_movementtest, only 2 of 11 joints (PhysX) and 3 of 11 (Newton) moved beyond the test threshold; the 8 hose joints moved less than the threshold. The test as a whole passes, but please do not expect the hose to behave like a real hose. - NVIDIA Omniverse Asset Validator: Failures 0 / Errors 0. The 3,168 warnings are of three kinds:
WeldChecker1,920 (co-located mesh points that could be merged),ShaderImplementationSourceChecker1,056 (MDL shader implementation source) andManifoldChecker192 (non-manifold edges). None of them is a failure.
License
- The assets (geometry, physics setup, and the materials and textures created for them): CC BY 4.0. Author: Yamato Protec Co., Ltd. The copyright remains with Yamato Protec Co., Ltd.; CC BY 4.0 grants a license to use, share and adapt the assets with attribution, it does not transfer the copyright.
- BIM data: the BIM data of the same products distributed through BIM libraries (for example BIMobject) remains under the terms of those libraries. This OpenUSD dataset is licensed separately, as stated here.
- Product names, logos and label designs are not licensed under CC BY 4.0.
- The videos in
videos/are not licensed under CC BY 4.0 (see above). - Third-party: the MDL modules under
payloads/materials/are NVIDIA OmniPBR modules under the BSD-3-Clause license (seeTHIRD_PARTY_NOTICES.txt). They are not covered by CC BY 4.0.
日本語
ヤマトプロテック株式会社(製品のメーカー)が公開する、消防設備のシミュレーション用 OpenUSD 資産(SimReady)です。最初の資産は粉末(ABC)蓄圧式消火器 YA-10NX(安全栓・ストッパー・レバー・圧力計・ホースが動作)で、今後増やします。
想定する用途は、シミュレーション・ロボット・デジタルツイン・訓練・教育です。
研究・デモ用のモデルであり、実機の性能・安全性・消火能力・型式承認・保守の判断に使えません。機構・質量配分・ばね・摩擦・ホースの挙動は近似で、一部の値は推定です(yp:estimated)。ライセンスは資産本体が CC BY 4.0、製品名・ロゴ・ラベルの意匠は対象外、payloads/materials/ の MDL は NVIDIA の BSD-3-Clause です。動画内のロボットと環境は NVIDIA Isaac Sim の資産で、本データセットには含みません。
- Downloads last month
- 80